EARTHLEAKAGE CIRCUIT BREAKERsite.iugaza.edu.ps/jtaha/files/2016/10/ELCB.pdf · value, the ELCB can...
Transcript of EARTHLEAKAGE CIRCUIT BREAKERsite.iugaza.edu.ps/jtaha/files/2016/10/ELCB.pdf · value, the ELCB can...
EARTH LEAKAGECIRCUIT BREAKER
B
People Electric Appliance serves for people.
• ISO14001 OHSAS18001ISO9001
DZ47LE EARTH LEAKAGE CIRCUIT BREAKER
APPLICATION
DZ47LE earth leakage circuit breaker is used for the protection against electrical leakage in t hecircuit of 50Hz or 60Hz, rated voltage single-phase 240V, 3-phase 415V, rat ed cu rrent up t o 60AWhen somebody gets an electirc shock or the residual current of the circuit exceeds the fixevalue, the ELCB can cut off the power within the time of 0.1s automatically protec ting thepersonal safety and preventing the equipement from the fault re sulted fro m the resi dual current.With this function, the ELCB can protect the circuit against overload and short circu it or can beused for the unfrequent switchover of the circuit under normal conditions. It conforms to IEC61009 standard.
SPECIFICATIONS
RatedVoltage(V) Pole No Rated current
(A)
Leakage action
current(mA)
Leakagedead
current(mA)
Leakageactiontime(s)
220V
380V
1P
2,3,4P
30
100
1~10
15~32
40~60
15
50
0.1
a.TH35-7.5 rail is used for the product installation.b.Outline and installation dimensions(see the figure and the table)
Type
DZ47LE-60/1N
DZ47LE-60/2
DZ47LE-60/3
DZ47LE-60/3N
DZ47LE-60/4
Dimensions
A B C D E
46
64
91
100
118
70
70
70
70
70
40
40
40
40
40
45
45
45
45
45
94
94
94
94
94
MAIN TECHNICAL DATA
Single-poledouble line
Double-poledouble line
Triple-poletriple line
Triple-polefour line
Four-polefour line
DZ47LEC45LE
1 / 2
DZ47LEC45LE
2 / 2
DZ47LEC45LE
3 / 3
DZ47LEC45LE
3 / 4
DZ47LEC45LE
4 / 4
DZ47LE 1P
EARTH LEAKAGE CIRCUIT BREAKER
DZ47LE 2P
DZ47LE 3P
DZ47LE 4P
• B-01
RDX2LE-100 EARTH LEAKGE CIRCUIT BREAKER
RDX65LE EARTH LEAKGE CIRCUIT BREAKER
SPECIFICATIONS
APPLICATION
RDX65LE is used for the protection against electrical leakage in the circuit of 50Hz or 60Hz, rated voltage single-phase 230V, 3 phase 400V, rated current up to 60A.Whe n so mebody gets an electric shock or the residual current of the circ uit exceeds the fixed value, the ELCB can cut off the power within the time of 0.1s automatically to protect the personal safety and preventthe equipment from the fault resulted by the residual current. With this funtion, the ELCB canprotect the circuit against overload and short circuit or can be used for the unfrequent switchoverof the circuit under normal conditions. It conforms to IEC61009.
Number of PolesRated voltageRated current
Rated Operating Current(mA)Rated non-operation (I n)
Tripping Curve
1P+N, 2P+N, 3P+N, 4P+N240/415V
6A 10A 16A 20A 25A 32A 40A 50A 63A30mA 100mA 300mA
0.5I nC,D
RDX65LE 1P
RDX65LE 2P
APPLICATION
SPECIFICATIONS
RDX2LE-100 is suitable for the circuit of 50Hz, rated voltage 230/400V, and rated current upto 100A.It has the earth leakage, overload & short circuit protect function. It can al so add over voltageprotect function. It is mainly used in buiding illumination and electrical distribution system.
Number of PolesRated Current(A)Rated Residual Operating Current(I n)(mA)Rated Residual Non-operation Current(I no)(mA)Rated Voltage(V)Residual Current Off-timeShort Circuit Capacity(Icu)EnduranceTripping CurvePortection Degree
1P+N,2P+N,3P+N,4P+N40,50,63,80,100
30,50,100,200,3000.5I n
AC 230/4000.1S
3000A4000
C,DIP20
OVERALL AND MOUNTING DIMENSIONS(UNIT:MM)
4P3P2P1P
10881
5427
3P+N 4P 1083P 81
2P 54
81 45
7044 16
35 27
L
7.5
RDX2LE-100 2P+N
RDX2LE-100 3P+N
EARTH LEAKGE CIRCUIT BREAKER
• B-02
DZ47LE EARTH LEAKAGE CIRCUIT BREAKER
APPLICATION
SPECIFICATIONS
DZ65LE EARTH LEAKAGE CIRCUIT BREAKER
APPLICATION
SPECIFICATIONS
Rated voltage
Rated current
Pole
Rated operating current (mA)
Rated non-operating (I N)
Tripping curve
240/415V
6A 10A 16A 20A 25A 32A 40A 50A 63A
1P 2P 3P 4P
30mA 50mA 100mA 300mA
0.5I n
C type D type
This products provide a high level of protection against earth leakage faults by the RCD in addition to the overcurrent and short-circuit protection offered by the MCB. This products are suitable for the protection of circuits with the highest safety requirements(i.e.eletctric apparatus in rooms with high humidity, socket circuits, rooms with bath bubs of shower etc.)
Rated voltage
Rated current
Pole
Rated operating current (mA)
Rated non-operating (I N)
Tripping curve
Type
230/400V
6A 10A 16A 20A 25A 32A 40A 50A 63A
1P+N 2P 3P 4P
30mA 50mA 100mA 300mA
0.5I N
C type D type
Electronic
This products provide a high level of protection against earth leakage faults by the RCD in addition to the overcurrent and short-circuit protection offered by the MCB.
This products are suitable for the protection of circuits with higher safety requirements (i.e.electric apparatus in rooms with high humidity, socket c ircuits, ro oms with bath bubs orshower etc.)
EARTH LEAKAGE CIRCUIT BREAKER
• B-03
APPLICATIONS
DXM3L(DZ30L)RESIDUAL CURRENT CIRCUIT BREAKER WITH OVER CURRENT PROTECTION
APPLICATION
DXM3L(DZ30L) leakage protective breaker, DXM3L(DZ30L) (phase wire+neutral wire+leakage
+overload voltage) protective breaker is used in the single phase residence circuit of AC.50Hz/ 60Hz ,
rat ed voltage 220V, used as electron shock protection. It can protect civil electron circuit from
over load and short-circuit. This produc t has advantages of small volume, high breaking capacity
zero, and live wires are cutted off at the same time, also protecting person fro m electric shock
when the livewire connected opposite.
This product conforms to IEC61009, Gb6829, GB/16917 .
PC60NL EARTH LEAKAGE CIRCUIT BREAKER
PC60NL
DXM3L(DZ30L)
EARTH LEAKAGE CIRCUIT BREAKER
Test Monthly
The PC60NL RCCB incorporates a residual curren t ope rated electromagnetic release which
operates without any auxiliary source of supply to open a circuit automatically in the case of an
earth leakage fault between phase and earth greater than or equal to I n.
The PC60NL combined with MCB & RCCB Provides:
1. protection against indirect contact
2. complementary protection against direct contact
3. protection for the installation against insulation faults
PS250LE RESIDUAL CURRENT CIRCUIT BREAKER
APPLICATION
SPECIFICATIONS
PS250LE RCBO is suitable for the circuit of 50/60Hz, rated volta ge 230/400V,and rated current up to 100A. It has the earth leakage, overload, short circuit protect function. It can also ad d over voltage protect function. It is mainly used in building illumination and electrical distribution system.
Number of Pole
Rated Current(A)
Rated Residual Operating Current(I n)(mA)
Rated Residual Non-operation Current(I n)(mA)
Rated Voltage(V)
Residual Current Off-time
Short Circuit Capacity(Icu)
Endurance
Tripping Type
Protection Degree
1P+N,2P,3P+N,4P
40,50,63,80,100
30,50,100,200,300
0.5I n
AC 230/400
0.1S
3000A
4000
C,D
IP20
PS250LE 2P
PS250LE 4P
• B-04
ADVANTAGE
Earth leakage Circuit Breaker With Overcurrent ProtectionElectronic typeCompact structure, small volume, (two modules in width)With short circuit, overload and residual current protectionAction function has nothing to do with main circuit voltageWith midline cut-off functions, it is safer and more reliable.With double functional connection terminals, it has strong connection ability.With contact state indicator, it is easy to recognize the contact situation.Different handle colors are used to indicate different rated current.High breaking capacity:10KAWith wide range of rated current, it can be used as family main switchUnited accessories seriesType can provent the error tripping caused by electric equipment
SPECIFICATIONS
MOUNTING DIMENSION
Pole No.
Standards
Rated Current
Rated eakage Current I n
Rated Voltage(Ue)
Tripping Time
Sensitivity
Type
Breaking Capacity Icn
Tripping Characteristic
Grade of Protection
Service Life
Terminal Connection
Shell width
2 P
IEC61009(EN61009)GB16917.1
Type C 6,10,13,16,20,25,32,40AType D 6,10,13,16,20A
30,100mA
230V;50Hz
G Minimum 10ms for prolonging
AC type
3
10KA
C,D
IP40
Electric:no less than 4000 timesMachanic:no less than 20000 times
Wire 1-25 square micronBus-bar row thickness 0.8-2mm
Din Rail 35mm(Two modulus in width)
5.5 30.5 4.5
44
9.5
45
60
1P+N
80
35
1 N
2 N
RDX6LE-63 EARTH LEAKAGE CIRCUIT BREAKER
RDX6LE-63
RDX6LE-63
EARTH LEAKAGE CIRCUIT BREAKER
RDX6LE-63
• B-05
APPLICATION
PID RESIDUAL CURRENT CIRCUIT BREAKER
SPECIFICATIONS
OVERALL AND MOUNTING DIMENSIONS(Unit:mm)
NORMAL OPERATION AND MOUNTING REQUIREMENT
PID RCCB is in conformity with the standard of IEC61008. The RCC B ca n cu t of f the faul tcircuit immediately on the occasion of shock hazard or earth leakage of trunk ine. Thu s, it is suitable to avoid the shock hazard and fire caused by earth leakage.
The RCCB is m ainly suit able for useing in varieties of plants and enterprises, buildings,constructions. It can be used in circuits up to 1 phase 230V and 3 phase 400V 50/60Hz. RCCB is not suitable for use in DC pulse system.
Number of PoleRated Current(A)Rated Residual Operating Current(I n)(mA)
Rated Voltage(V)
Residual Operating Current Scope
Residual Current Off-timeShort Circuit Capacity(Icu)Endurance
Protection Degree
1P+N,3P+N16,20,25,40,50,63
30,100,300,500AC 230/240AC400/415
0.5I n~1I n0.3S
6000A4000IP20
Circumstance temperature-5 ~+40 ,average temperature not exceeding 35 . Altitude above sea level less than 2000m. Humidity not exceeding 50% at 40 and not exceeding 90% at 25 . Installation class or . Pollution class . Installation method DIN Rail mounting type. The external magnetism shall not be more than 5 times of terrestrial one. Product shall be installed vertically at the place where there shall be no severe impact or
vibration. The product is switched on when the handle is at upper position.
74.5
35.5
36
65 85
N
O.OFF
N
65 85
N
O.OFF
72
PID 2P
RESIDUAL CURRENT CIRCUIT BREAKER
PID 4P
• B-06
PID-N RESIDUAL CURRENT CIRCUIT BREAKER
WIRING DIAGRAM
CONSTRUCTION AND FEATURE
TECHNICAL DATA
Provides protection against earth fault/leakage current and function of isolation High short-circuit current withstand capacity
Applicable to terminal and pin/fork type busbar connection Contact position indication
Equipped with finger protected connection terminals Fire resistant plastic parts endures abnormal heating and strong impact
Automatically disconnect the circuit when earth fault/ leakage current occurs and exceeds the rated sensitivity.
Independent of power supply and line voltage, and free from external interference, voltage fluctuation.
Rated conditional residual short-circuit Current I c: 6000A Tripping duration: instantaneous tripping 0.1s Residual tripping current range: 0.5I n~1I n Electro-mechanical endurance: 4000 cycles
Connection terminal: Screw terminal Pillar terminal with clamp
2 Connection capacity: Rigid conductor 25mm
Fastening torque: 2.0Nm Installation: On symmetrical DIN rail 35mm
Mode: electro-magnetic type, electronic type
Pole No.: 2, 4
Rated making and breaking capacity: 630A
Rated current(A): 25, 40, 63 Rated voltage: 230/400V AC Rated frequency: 50/60Hz
Residual current characteristics: A, AC
Rated residual operating current I n(mA):
Rated residual non-operating current I no: 0.5I n Rated conditional short-circuit current Inc: 6000A
Panel mounting
10, 30, 100, 300, 500
PID-N 2P
RESIDUAL CURRENT CIRCUIT BREAKER
•••••••••
••••••• •
•••••
PID-N 4P
•••••••••
••••••• •
•••••
• B-07
Design according toTripping time
Rated voltageRated tripping currentSensitivityRated shortCircuit strength
Maximum back-up fuse forShort circuit protectionMaximum back-up fuse forOveload protectionResistance to climatic conditionsDegree of protectionEndurance electrical comp. mech comp.
ICE61008 (EN 61008)undelayedmin.10 ms delaymin.40 ms delaywith selective disconnecting function230/400V; 50Hz10,30,100,300,500mAAC and pulsating DC10KA with 63A gL back-up fuse10KA with 80A gL(F7-80 and-863)6KA(rated current 63A) with 63A gL63A gL80A gL (F7-80 and-863)45A gL(F7-25 and-40A)40A gL(F7-80 A)according to IEC 61008built-in switch IP 40
4.000 operating cycles20.000 operating cycles
MECHANICAL
Frame sizeSocket sizeDevice widthMounting
Upper and lower terminalsTerminal protection
Terminal capacityBusbar thickness
45mm80mm35mm (2mod.), 70mm (4mod.)quick fastening with 2 lock-inPositions on DIN rail En50022open mouthed/lift terminalsfinger and hand touch safe,VBG 5, OVE-EN 6
21 --- 25mm0.8 - 2mm
PF7 RESIDUAL CURRENT DEVICE
APPLICATION
The RCD is in conformity with the standard of IEC61008, GB16916 and BS EN61008. The RCDcan cut off the fault circuit immediately on the occasion of shock hazard or earth leakage of trunkline, thus, it is suitable to avoid the shock hazard and fire caused by earth leakage. The RCD is mainly suitable for using in variety of plants and ente rprises, buildings constructions,commerces, guesthouses and families. It can be used in circuits up to single phase 230V, three phases400V 50 to 60Hz. The RCD is not suitable for using on DC pulse system.
ELECTRICAL
PF7 2P
PF7 4P
RESIDUAL CURRENT DEVICE
DIMENSION (Units: mm)
•••••••••
•••••••••
•••••••••
•••••••••
• B-08
PFIN RESIDUAL CURRENT DEVICE
PFIN Residual Current Device(RCD) is in conformity wit h th e st andar d of VDE 0664,CEE27 and BS4293. It can cut off the fault circuit immediately on the occasion of shock hazard or earth leakageof trunk line. Thus, it is suitable to avoid the shock hazard and fire caused by earth leakage. PFIN ELCB is mainly suitable for var ieties of plants and enterprises, buildings, constructions, commerces,hotels and families. It can be used in circuits up to single phase 240V, three phases 415V, 50 or 60Hz.
TypeRated current In (A)
Rated operating current for earth leakage I n(A)Rated non-operating current for earth leakage I n(A)
Voltage Un(V)Pole
PNFIN2525
PNFIN4040
PNFIN6363
PNFIN100100
0.5I n0.03,0.1,0.3,0.5 0.1,0.3,0.5
240(220)V 415(380)V2 ,4
2In
I n0.2
2I n0.1
0.25A(or5I n)0.04
In=252001500
In=403002000
In=634003000
4000
Limited value of non-operating current forbalance load or unbalance load
In minimum value of rated making andbreaking capacity
Rated conditional short circuit current Inc(A)Endurance(times)
Operating time(second)
MAIN TECHNICAL DATA
PNFIN RESIDUAL CURRENT DEVICE
APPLICATION
PNFIN Residual Current Device(RCD) is in c onfor mity w ith th e stan dard of IEC61008,VDE 0664, CEE27 and BS4293. It can cut off the fault circuit immediately on the occasion of shock hazard or earth leakageof trunk line. Thus, it is suitable to avoid the shock hazard and fire caused by earth leakage. PNFINRCD is mainly suitable for using in varieties of plants, enterprises, buildings, constructions,commerces, guesthouses and families. It can be used in circuits up to single phase 240V, three phases 415V, 50 or 60Hz.
SPECIFICATIONS
APPLICATION
MAIN TECHNICAL DATA
2In
I n0.2
2I n0.1
0.25A(or5I n)0.04
In=252001500
In=403002000
In=634003000
4000
Limited value of non-operating current forbalance load or unbalance load
In minimum value of rated making andbreaking capacity
Rated conditional short circuit current Inc(A)Endurance(times)
Operating time(second)
SPECIFICATIONType
Rated current In (A)Rated operating current for earth leakage I n(A)
Rated non-operating current for earth leakage I n(A)Voltage Un(V)
Pole
PFIN2525
PFIN4040
PFIN6363
PFIN100100
0.5I n0.03,0.1,0.3,0.5 0.1,0.3,0.5
240(220)V 415(380)V2 ,4
PNFIN 2P
PNFIN 4P
PFIN 2P
RESIDUAL CURRENT DEVICE
PF1-4P
• B-09
Number of Pole
Rated Current (A)
Rated Residual Operating Current (I n)(mA)
Rated Residual Non-operation Current (I no)(mA)
Residual Operating Current Scope
Residual Current Off-time
Short Circuit Capacity (Icu)
Endurance
Protection Degree
Rated Voltage (V)
2P,4P
16,20,25,32,40,50,63,80,100
10,30,100,300,500
0.5 I n
AC 230/240
AC 400/415
0.5I n~1I n
0.3S
3000A
4000
Ip20
PF360 RESIDUAL CURRENT CIRCUIT BREAKER
APPLICATION
SPECIFICATION
The RCCB is in conformity with the standard of IEC61008. The RCCB can cut off the faultcircui t immediately on the occasion of shock hazard of ear th leakage of t runk line. Thus, it is suitableto avoid the shock hazard and fire caused by earth leakage. The RCCB is mainly suitable for useing in varieties of plants and enterprises, buildings constructions.It can be used in circuits up to 1 phase 230V and 3 phase 400V 50/60Hz. RCCB is not suitable for use on DC pulse system.
OPERATION PRINCIPLE
OVERALL AND MOUNTING DIMENSIONS (UNIT: MM)
I >
1
2
3
4
I >
1
2
3 5 7 N
4 6 8 N
69
6844
6.3
90.4
90.4 71 46
7.5
3517.517.5
217.5
2
7017.517.5
2 17.5 17.5
90.4 71 46
17.52
7.5
PF362 2P
PF364 4P
RESIDUAL CURRENT CIRCUIT BREAKER
• B-10
SensitivityHigh sensitiviy:10mA
30mA
Pole22
2222224444222224444422222444222222244444
Medium sensitivity:100mA
Low sensitivity:300mA
Low sensitivity:500mA
Terminal cover kit:(1 se = 2 covers)
For RCCBs2For RCCBs4For RCCBs2For RCCBs4
16 to 63A16 to 63A
80 to 100A80 to 100A
10 sets10 sets10 sets10 sets
PRCZ005PRCZ006PRCZ007PRCZ008
Current rating cat.ref.16A25A
16A25A40A63A80A
100A25A40A63A80A25A40A63A80A
100A25A40A63A80A
100A25A40A63A80A
100A25A40A63A80A
100A25A40A63A80A
100A25A40A63A80A
100A
PRC216BPRC225B
PRCD216BPRCD225BPRCD240BPRCD263BPRCD280BPRCD284BPRCD425BPRCD440BPRCC463BPRCD480BPRCE225BPRCE240BPRCE263BPRCE280BPRCE284BPRCE425BPRCE440BPRCE463BPRCE480BPRCE484BPRCF225BPRCF240BPRCF263BPRCF280BPRCF284BPRCF425BPRCF440BPRCF463BPRCF480BPRCF484BPRCG225BPRCG240BPRCG263BPRCG280BPRCG284BPRCG425BPRCG440BPRCG463BPRCG480BPRCG484B
DESCRIPTION
PR RESIDUAL CURRENT CIRCUIT BREAKER
EARTH FAULT INDICATOR
NUISANCE TRIPPING
To open a circuit automatically in case of an earth leakage fault between phase and earth and /or neutral greater or equal to 10mA, 30mA, 100mA, 300mA or 500mA. It is used in domestic,commercial and industrial installations.
Mechanical indicator appearing on the front face of the RCCB is to be differed between tr ippingand off position yellow-tripped.
All the RCCBs are protected against transient voltages (lightenin g, line disturbances)andtransient currents (from high capacitive circuits) DC sensitive RCCBs or time delay devices are available, please consult us you also have the possibiliy to install the following accessories:electrical cover kit, locking kit.
PRC 2P
PRC 4P
PRCC 2P
PRCC 4P
RESIDUAL CURRENT CIRCUIT BREAKER
• B-11
45
5443.76.5
TH35
T
91
36 T
72
4464
12-6
672
90 45
I2/1 4/3 6/5N/N
Y1Y2
180
90L1L2L3NPE
1 3 5 N
M
AB
W1
2 4 6 N
T
PR101 RESIDUAL CURRENT CIRCUIT BREAKER
APPLICATION
PR101 Series Earth Leakage Circuit Breakers apply to in AC circuit of frequency of 50 Hz, rated voltage up to 415V, rated current up to 80A. It is mainly use d as an indi rect con tactprotection fot human. It also can be used to preven t aga inst the f ire d anger caus ed b y ea rth faltcurrent ow ing to equipment insulation damage. When the protective measures of the electric shockare out of work, the RCCB whose rated residual operating current less than 30mA can serve as thesupplementary protection for in direct contact, but it can t be used as the sole direct contact protection.
PRODUCT FEATURES
1. PR101 Series Leakage Circuit Breakers are the protector for pure electromagnetic residual current operation.2. The operation function is unrelated to circuit voltage, but operation is reliable.3. It can be reliably operated on the loss of phase or neutral.4. The capacity of resisting electromagnetic interference is strong.
MAIN TECHNICAL DATA
Type Un(V) Hz Im
I mIncI m
InA
I nmA
I nomA I N 2I N 5I N
The maximum of break-time(s)
PR1012P 240
415
50,60
500A(In50A
10In)(In50A)
500A(In50A
10In)(In50A)
6000A
6000A
6,10,16,25,32,40,50,63
80
6,10,16,25,32,40,50,63
80
30
50
75
100
300
500
30
50
75
100
300
500
0.25A 500A
15
25
40
50
150
250
15
25
40
50
150
250
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
-
-
-
0.04
0.04
0.04
-
-
-
0.04
0.04
0.04
0.04
0.04
0.04
-
0.04
0.04
0.04
0.04
0.04
-
0.04
0.04
0.04
0.04
0.04
0.04
0.04
0.04
0.04
0.04
0.04
0.04
0.04
0.04
DIMENSIONS
PR101 2P
PR101 4P PR1014P
EARTH LEAKAGE CIRCUIT BREAKER
• B-12
PBV-D RESIDUAL CURRENT CIRCUIT BERAKER
ELECTRICAL DATA
Design according toTripping time
Rated voltageRated tripping currentSensitivityRated shortCircuit strength
Maximum back-up fuse forShort circuit protectionMaximum back-up fuse forOverload protectitonResistance to climatic conditionsDegree of protectionEndurance electrical comp. mech comp
IEC 61008 (EN 61008)undelayedmin.10 ms delaymin.40 ms delaywith selective disconnecting function230/400V; 50Hz10,30,100,300,500mAAC and pulsating DC10KA with 63A gL back-up fuse10KA with 80A gL (F7-80 and -863)6KA(rated current 63A)with 63A gL63A gL80A gL(F7-80 and 863)45A gL(F7-25 and -40A)40A gL(F7-80 A)according to IEC 1008built-in switch IP 40
4.000 operating cycles20.000 operating cycles
MECHANICAL DATA
Frame sizeSocket sizeDevice widthMounting
Upper and lower terminalsTerminal protection
Terminal capacityBusbar thickness
45mm80mm35mm (2mod.), 70mm (4mod.)quick fastening with 2 lock-inPositions on DIN rail En50022open mouthed/lift terminalsfinger and hand touch safe,VBG 5, OVE-EN 61 --- 25mm20.8 - 2mm
PBV-D 2P
PBV-D 4P
RESIDUAL CURRENT CIRCUIT BREAKER
• B-13
PG RESIDUAL CURRENT CIRCUIT BREAKER
APPLICATION
PG RCCB, rated current is adjustable from 10A up to 60A. User can select suitable current for better protection against overload and short-circuit. The products comply with IEC61008.
SPECIFICATIONS
Number of PoleRated Voltage(V)Rated Current(A)
Leakage Motion Current(mA)Leakage Dead Current(mA)
2 4
250/44010,15,20,30,45,50,60A Adjustable
300,500150,250
300,500150,250
N 1
210
70
53
70 115
210
N 3 2 1
53
70
TG RESIDUAL CURRENT CIRCUIT BREAKER
APPLICATION
TG RCCB, rated current is adjustable from 10A up to 60A. User can select suitable current for better protection against overload and short circuit.The products comply with IEC61008.
SPECIFICATIONS
Number of PoleRated Voltage(V)Rated Current(A)
Leakage Motion Current(mA)Leakage Dead Current(mA)
2 4
250/44010,15,20,30,45,50,60A Adjustable
300,500150,250
300,500150,250
PG230
TG430
PG430
TG230
RESIDUAL CURRENT CIRCUIT BREAKER
DIMENSION (Units: mm)
• B-14
PL9 RESIDUAL CURRENT CIRCUIT BREAKER
APPLICATION
PL9 Residual Curren t De vice is i n con formi ty wi th the standard of IEC61008. It can cut off the fault circuit immediately on the occasion of shock hazard or earth leakage of trunk l ine. Thus, it is suitable to avoid the shock hazard and fire caused by earth leakage. PL9 RCD is mainly suitable for using in variet ies of plants, enterprises, buildings, constructions,commerces, guesthouses and families. It can be used in circuits up to 1phase 230V and 3 phases400V 50/60Hz.
SPECIFICATIONS
Number of Pole
Rated Current(A)
Rated Residual Operating Current(I n)(mA)
Rated Residual Non-operation Current(I n)(mA)
Rated Voltage(V)
Residual Current Off-time
Short Circuit Capacity(Icu)
Endurance
Protection Degree
2P,4P
40,50,60
30,100,300
0.5I n
AC 230/400
0.1S
3000A
4000
IP20
PL9 2P
PL9 4P
PDBR230 2P
PDBR430 4P
SPECIFICATIONS
Type
Poles
Rated voltage(V)
Rated current(A)
Leakage motion current(mA)
Leakage dead current(mA)
Accord with standand
PDBR230 PDBR430
250V/440V
5A-15A,10-30A,30-60AAdjustable
300mA
150mA
500mA
250mA
1000mA
500mA
NFC61450
2P 4P
RESIDUAL CURRENT CIRCUIT BREAKER
• B-15
CBT 2P
CBT EARTH LEAKAGE CIRCUIT BREAKER
USAGE
CBT Residual Current Circuit Breaker without ov er curr ent prot ecti on c onforms to the
standard of GB16916.1, IEC61008, BS4293 etc. It is used in the circuits o f AC50~ 60Hz, single
phase 230V(220V), three phases 400V(380 V) i n in dus tri al & m ini ng ente rpri ses, comm erc ial
buildings and housing for protection of personal electric shock haz ard and electric equipment and
for unfrequent switchover of circuits under normal conditions.
INSTRUCTIONS
This RCCB is intended for installation within an enclosure in an ambient temperature between
-5 and 40 with an average value not exceeding 35 over a 24 hours period. It shou ld not be
installed at an altitude greater than 2000m above sea level, nor in an atmosphere subject to
excessive pollution by smoke, dust, chemical fumes, salt laden spray, prolonged periods of high
humidity or other abnormal conditions. See current product catalogues for a wide range of suitable
enclosure.
PL13 EARTH LEAKAGE PROTECTING DEVICE
Conforms with UL standard 943 CLASS A(GFCI and 498 receptacle). Protects against ground fault shock hazard from frayed wiring, damaged appliances, wherever
electrical contact might provide a path to ground through human body. Can be wired to provide 20 amp GFCI feed-through protection to other outlets on outlets on the
same circuit. Overload and neutral line error grounding protection. Trip thresholds of 4~6 milliamps. Unit trips within 0.025 seconds of fault detection. Operate within -35 ~66 environmental temperature. Protect against 10~450MHz voice interference. Made of high impact termoplastic to resist da mage fr om impa ct a nd f requ ent use. And with
unbreakable nylon wall plate. Back and side wiring terminals permit fast installation. Clearly marked line and load terminals. Incorporate dual bolt terminal and installation screws w hich accep t standard screw
driver blades. The voltage and frequency of the product can be designed as per customers different repuirements.
PL13-01
PL13-02
PL13-03
SPECIFICATION
EARTH LEAKAGE CIRCUIT BREAKER
• B-16
GFCI RECEPTACLE
3 Grace Switch can control resistance and inductance load which meets residential useand commercial use for its reliability and unique performance. Switch Characteristics
Large head double-drive combination screws for quick wiring Back and side wire connection are easy to be installed Green grounding screw Choice of different color
GFCI, DuplexReceptacle With redReset Button and blueTest button 20A, 125VAC, 60Hz,With LED lightIndicator
PTG15-L-2ALPTG15-L-2DEPTG15-L-2BLPTG15-L-2GRPTG15-L-2IVPTG15-L-2WH
ALMONDDEEP-ALMONDBLACKGRAYIVORYWHITE
RED RESET/BUTTON TEST
PTG20-L
GFCI, DuplexReceptacle ButtonsMatch body face color20A, 125V AC, 60Hz,With LED lightIndicator
PTG20-L-1ALPTG20-L-1DEPTG20-L-1BLPTG20-L-1GRPTG20-L-1IVPTG20-L-1WH
ALMONDDEEP-ALMONDBLACKGRAYIVORYWHITE
ALMONDDEEP-ALMONDBLACKGRAYIVORYWHITE
PTG20-L-2ALPTG20-L-2DEPTG20-L-2BLPTG20-L-2GRPTG20-L-2IVPTG20-L-2WH
ALMONDDEEP-ALMONDBLACKGRAYIVORYWHITE
RED RESET/BUTTON TEST
GFCI, DuplexReceptacle With redReset Button and blueTest button 20A, 125VAC, 60Hz,With LED lightIndicator
DESCRIPTION ART.NO. BODY COLOR BUTTON COLOR
DESCRIPTION ART.NO. BODY COLOR BUTTON COLOR
PTG15-L
PTG20-L
DESCRIPTION ART.NO. BODY COLOR BUTTON COLOR
RECEPTACLE
• B-17
GFCI RECEPTACLE
DESCRIPTION ART.NO. BODY COLOR BUTTON COLOR
GFCI, DuplexReceptacle With redReset Button and blueTest button 20A, 125VAC, 60Hz,
PTG15-2ALPTG15-2DEPTG15-2BLPTG15-2GRPTG15-2IVPTG15-2WH
ALMONDDEEP-ALMONDBLACKGRAYIVORYWHITE
RED RESET/BUTTON TEST
PTG15
DESCRIPTION ART.NO. BODY COLOR BUTTON COLOR
DESCRIPTION ART.NO. BODY COLOR BUTTON COLOR
DESCRIPTION ART.NO. BODY COLOR BUTTON COLOR
PTG20
PTG15-L
GFCI, DuplexReceptacle ButtonsMatch body face color20A, 125V AC, 60Hz.
PTG20-1ALPTG20-1DEPTG20-1BLPTG20-1GRPTG20-1IVPTG20-1WH
ALMONDDEEP-ALMONDBLACKGRAYIVORYWHITE
ALMONDDEEP-ALMONDBLACKGRAYIVORYWHITE
RED RESET/BUTTON TEST
ALMONDDEEP-ALMONDBLACKGRAYIVORYWHITE
PTG20-2ALPTG20-2DEPTG20-2BLPTG20-2GRPTG20-2IVPTG20-2WH
GFCI, DuplexReceptacle With redReset Button and blueTest button 20A, 125VAC, 60Hz,
ALMONDDEEP-ALMONDBLACKGRAYIVORYWHITE
ALMONDDEEP-ALMONDBLACKGRAYIVORYWHITE
PTG15-L-1ALPTG15-L-1DEPTG15-L-1BLPTG15-L-1GRPTG15-L-1IVPTG15-L-1WH
GFCI, DuplexReceptacle ButtonsMatch body face color15A, 125V AC, 60Hz.With LED lightindicator
PTG20
RECEPTACLE
• B-18
DESCRIPTION ART. N0. COLOR
PTM-4 QUICKWIRE AND SIDE WIRED TOGGLE 15AMP 120V AC QUICK SWITCHES
ALMONDDEEP-ALMONDBLACKGRAYIVORVWHITE
PTM-4ALPTM-4DEPTM-4BLPTM-4GRPTM-4IVPTM-4WH
3-WayDecorativeSwitch WithGrounding ScrewQuick Wiring andSide Wiring
DESCRIPTION ART. N0. COLOR
PTM-3 QUICKWIRE AND SIDE WIRED TOGGLE 15AMP 120V AC QUICK SWITCHES
ALMONDDEEP-ALMONDBLACKGRAYIVORVWHITE
PTM-3ALPTM-3DEPTM-3BLPTM-3GRPTM-3IVPTM-3WH
Single-poleDecorative SwitchScrew QuickWiring and SideWiring
DESCRIPTION ART. N0. COLOR
PTM-2 QUICKWIRE AND SIDE WIRED TOGGLE 15AMP 120V AC QUICK SWITCHES
ALMONDDEEP-ALMONDBLACKGRAYIVORVWHITE
PTM-2ALPTM-2DEPTM-2BLPTM-2GRPTM-2IVPTM-2WH
3-Way ToggleSwitch WithGrounding ScrewQuick Wiring andSide Wiring
DESCRIPTION ART. N0. COLOR
ALMONDDEEP-ALMONDBLACKGRAYIVORVWHITE
PTM-1ALPTM-1DEPTM-1BLPTM-1GRPTM-1IVPTM-1WH
Single-pole ToggleSwitch WithGrounding ScrewQuick Wiring andSide Wiring
PTM-1 QUICKWIRE AND SIDE WIRED TOGGLE 15AMP 120V AC QUICK SWITCHES
GFCI RECEPTACLERECEPTACLE
• B-19
GFCI RECEPTACLE
RECEPTACLE CHARACTERISTICS
Additional assembly screw Side wire connection and 8 holes back quick wire connection Choice of different color Green grounding screw Large head double-drive combination screws for quick wiring
DESCRIPTION ART. N0. COLOR
PTMSR-15/1J
PTMSR-15/2J
Standard DuplexReceptacle 15A,125V ACWith 1J , forSelf-groundingClip
1 for Standard wire
PTMSR-15/1J-ALPTMSR-15/1-ALPTMSR-15/1JEDPTMSR-15/1EDPTMSR-15/1JBLPTMSR-15/1BLPTMSR-15/1JGRPTMSR-15/1GRPTMSR-15/1JIVPTMSR-15/1IVPTMSR-15/1JWHPTMSR-15/1WH
ALMONDDEEP-ALMONDBLACKGRAYIVORVWHITE
DESCRIPTION ART. N0. COLOR
Standard DuplexReceptacle 15A,125V ACWith 2J , forSelf-groundingClip
2 for Standard wire
PTMSR-15/2J-ALPTMSR-15/2-ALPTMSR-15/2JEDPTMSR-15/2EDPTMSR-15/2JBLPTMSR-15/2BLPTMSR-15/2JGRPTMSR-15/2GRPTMSR-15/2JIVPTMSR-15/2IVPTMSR-15/2JWHPTMSR-15/2WH
ALMONDDEEP-ALMONDBLACKGRAYIVORVWHITE
RECEPTACLE
• B-20