PRODUCT CATALOG

TABLE OFCONTENTS

CHILLERSChiller, Air CooledChiller, EvaporativeChiller, Water Cooled

04

06 CONDENSING UNITS

03 INTRODUCTION

09 FLUID COOLERS

07 AIR COOLED CONDENSERS08 ADIABATIC COOLERS

10 PUMPING SYSTEMS

Coils, OverviewCoils, Heating/Cooling/IndustrialCoil BoxesDesaturation Coils

11 COILS

Michael.Collins@EagleBayRefrigeration.com - www.EagleBayRefrigeration.com - W: (315) 320-6385 - M: (315) 385-1809

INTRODUCTIONEagle Bay Refrigeration provides build-to-order air conditioning and refrigeration equipment to fit your performance and design requirements. We work with you to offer a wide assortment of products for all types of applications including custom equipment for non-standard or extreme requirements. We have a standard product offering; however, most equipment is configured to meet specific needs. A general list of products and customizations is provided below.

Please call with specific requests, as we regularly provide solutions that are not listed in our catalog. We also provide free energy analysis to evaluate potential energy savings options and identify the best products for your application.

CUSTOMIZATIONS• Adiabatic Cooling

• Low Sound Levels

• Corrosion Resistance

• Explosion Proof

• Custom Components

• Custom Footprint

• Custom Controllers, Algorithms & Protocols

• Variable Capacity Control

• Compressor Type / Circuiting

PRODUCTS• Air-Cooled Chillers

• Evaporative Cooled Chillers

• Water-Cooled Chillers

• Air-Cooled Condensing Units

• Air-Cooled Condensers

• Adiabatic Coolers

• Fluid Coolers

• Pumping Systems

• Coils

All our products are built in the USA at RAE Corporation's factory in Pryor, Oklahoma. Products come factory built and tested, significantly reducing installation time and cost. Equipment arrives fully functional minimizing on-site field work and costly startup modifications. Our equipment factory testing includes boiler bank for sustained load, proper operation verification, electrical point-to-point wiring testing, and pressure leak testing.

AIR-COOLED CHILLERS

03

We can provide chillers to best fit your air-cooled system. A wide capacity range, waterside economizer packages, pumping packages, and choice of compressor type are just a few of the easily adaptable features to fit your facilities cooling needs. These chillers are available in single or multi-plex configurations depending on the project needs. The number of compressors,

All our products are built in the USA at RAE Corporation's factory in Pryor Oklahoma. Products come factory built and tested, significantly reducing installation time and cost. Equipment arrives fully functional minimizing on-site field work and costly startup modifications. Our equipment factory testing includes boiler bank for sustained load, proper operation verification, electrical point-to-point wiring testing, and pressure leak testing.

PRODUCT FEATURES• Capacity Range from 3 to 240 tons or more

• Scroll, Reciprocating, or Screw Compressors

• Single, Tandem, or Multiple CompressorConfigurations

• Brazed plate or Shell and Tube evaporators

• Integral Waterside economizers

• True low ambient packages for a full -20F rating

• Integral pumping packages, storage tanks, and hydronics reduce project costs

CUSTOMIZATIONS• Low Sound Levels • Corrosive Resistance• Explosion Proof• Variable speed and ECM fan options for

optimal full and part-load efficiency• Various sizes and configurations,

horizontal or vertical airflow• Microprocessor controls and BAS communication• Multiple Circuit options for integral N+1

redundancy• Adiabatic cooling option for increased energy

efficiency

the refrigeration circuits, and capacity staging are all designed to meet the reliability requirements of the project and the expected variation in connected cooling load. Apply Adiabatic Cooling to your chiller for increased energy efficiency. Call Eagle Bay Refrigeration for a free energy efficiency and return on investment analysis for your application.

One of our Air Cooled Rotary Screw Chillers

EVAPORATIVE-COOLED CHILLERS

04

Evaporative chillers combine the most efficient evaporative cooling technology with water-cooled optimized compressors to provide the best return on your investment. Our build-to-order chillers can be provided as a single piece or multiple unit package to reduce installation labor and cost. Energy savings can be as high as 30 – 40%, but will depend on the climate conditions at your

All our products are built in the USA at RAE Corporation's factory in Pryor Oklahoma. Products come factory built and tested, significantly reducing installation time and cost. Equipment arrives fully functional minimizing on-site field work and costly startup modifications. Our equipment factory testing includes boiler bank for sustained load, proper operation verification, electrical point-to-point wiring testing, and pressure leak testing.

PRODUCT FEATURES• Capacity range includes up to 400 tons & more

• Waterside economizer system available – ship loose section

• Scroll, Reciprocating, or Screw Compressors

• Packaged pumping systems available

• Refrigerant leak detector and ventilation system per ASHRAE 15

• Heavy gauge steel cabinetry with primed and painted exterior

• Independent refrigerant circuits – dual and quad circuit models

CUSTOMIZATIONS• Low Sound Levels • Corrosive Resistance• Explosion Proof• Variable Capacity Technology

location. Eagle Bay Refrigeration is happy to evaluate the potential energy savings, so give us a call today for a free energy analysis.

One of our Evaporative Cooled Chillers

05

WATER-COOLED CHILLERSWater-Cooled chillers combine water-cooled optimized compressors with efficient heat-exchangers to provide world-class efficiencies in a compact package. They are designed for both industrial and commercial applications, with integrated microprocessor and safety controls. Chilled water pumping package, and related components, can be incorporated on

All our products are built in the USA at RAE Corporation's factory in Pryor Oklahoma. Products come factory built and tested, significantly reducing installation time and cost. Equipment arrives fully functional minimizing on-site field work and costly startup modifications. Our equipment factory testing includes boiler bank for sustained load, proper operation verification, electrical point-to-point wiring testing, and pressure leak testing.

PRODUCT FEATURES• Capacity range extends to 400 tons and more

• Brazed plate or Shell-n-tube Heat Exchangers

• Packaged pumping systems can be incorporated on the same skid

CUSTOMIZATIONS• Explosion Proof

• Corrosive Resistant Designs

• Variable Capacity Technology

• Stainless Steel, Cupro-Nickel and other specialty Heat Exchanges Available

• On-board Microprocessor, control algorithm and communication protocol options

the same skid. Our build-to-order chillers can be provided as a single piece or multiple unit package to reduce installation labor and cost. Energy savings can be as high as 30 – 40%, compared to air-cooled equipment, but actual savings will depend on the climate conditions at your location. Eagle Bay Refrigeration is happy to evaluate the potential energy savings, so give us a call today for a free energy analysis.

One of our Water-Cooled Chillers

06

CONDENSING UNITSOur condensing units are ideal for users requiring varying sizes, shapes, and configurations while not compromising on purpose build DX solutions. All condensing units offer factory mounted refrigerant trim such as liquid driers, isolation values, sight glasses, and solenoids. The condensing unit and evaporator are closely matched together to

All our products are built in the USA at RAE Corporation's factory in Pryor Oklahoma. Products come factory built and tested, significantly reducing installation time and cost. Equipment arrives fully functional minimizing on-site field work and costly startup modifications. Our equipment factory testing includes boiler bank for sustained load, proper operation verification, electrical point-to-point wiring testing, and pressure leak testing.

PRODUCT FEATURES• Extensive capacity range for all types of

applications • Scroll, Reciprocating, or Screw Compressors

• Single, Tandem, or Multiple Compressor Configurations

• True low ambient packages for a full -20F rating

• Factory mounted and wired hot gas reheat options for both on/off/ and modulating applications

• DX cooling and reheat coils available for complete matched system

CUSTOMIZATIONS• Adiabatic cooling option for increased

energy efficiency

• Low sound levels

• Corrosion resistance

• Variable speed and ECM fan motor options for optimal full and part-load efficiency

• Variable capacity options with digital or VFD compressors

• Mechanical and microprocessor controls for easy integration

• Explosion and hazardous proof classifications

assure the system will operate reliably and as expected. Units can also be designed for horizontal airflow for overhead obstructions, narrow footprints, or integration directly into a packaged air handler. Apply Adiabatic Cooling to your condensing unit for increased energy efficiency. Call Eagle Bay Refrigeration for a free energy efficiency and return on investment analysis for your application.

One of our Condensing Units

AIR-COOLED CONDENSERSOur air-cooled condensers offer a range of features and capacities more than typical commercial units. Condenser performance can be configured to meet your exact requirement. Number of fans and fan type are all configurable. Units come with plate-fin coils which remain fully cleanable with simple corrugated fins. Along with fewer skids, our condensers ship fully assembled,

All our products are built in the USA at RAE Corporation's factory in Pryor Oklahoma. Products come factory built and tested, significantly reducing installation time and cost. Equipment arrives fully functional minimizing on-site field work and costly startup modifications. Our equipment factory testing includes boiler bank for sustained load, proper operation verification, electrical point-to-point wiring testing, and pressure leak testing.

PRODUCT FEATURES• Special sizes up to 36 fans in a single shipped

piece

• True low ambient packages for a full -20F rating

• Factory installed controls for completely independent operation

• Unit can be rated for all refrigerants including the new Low GWP HFC blends

• Integral dedicated sub-cooling circuit

CUSTOMIZATIONS• Low sound levels

• Adiabatic cooling option for increased energy efficiency

• Explosion and hazardous proof classifications

• Corrosion resistance

• Options include Horizontal or V configurations, and Microchannel coils

• Variable speed VFD and ECM fan motor options for optimal full and part-load efficiency

• Microprocessor options with BAS communication

without loose legs or parts to field install, to reduce maintenance and rigging costs without compromising on performance. Condensers can be rated for all refrigerants. Apply Adiabatic Cooling to your condenser for increased energy efficiency. Call Eagle Bay Refrigeration for a free energy efficiency and return on investment analysis for your application.

07

One of our Air Cooled Condensers

80

ADIABATIC COOLERSOur Adiabatic Coolers are a hybrid solution that incorporates the energy savings efficiency associated with evaporative cooling towers with the simplicity and low maintenance associated with air-cooled heat rejection. Our equipment is provided with an on-board microprocessor control that maximizes performance while minimizing water consumption. Water

All our products are built in the USA at RAE Corporation's factory in Pryor Oklahoma. Products come factory built and tested, significantly reducing installation time and cost. Equipment arrives fully functional minimizing on-site field work and costly startup modifications. Our equipment factory testing includes boiler bank for sustained load, proper operation verification, electrical point-to-point wiring testing, and pressure leak testing.Adiabatic Cooling technology can be applied to air cooled chillers, fluid coolers, condensers and condensing units.

PRODUCT FEATURES• Uses water only when necessary and can run

dry most of the year in most climates

• Minimizes water usage without sacrificing energy efficiency

• Standard offering configured without sump and re-circulating pump simplifying the design, avoiding expensive water treatment, and mitigating proliferation of Legionella

• Coils stay completely dry, reducing reliance on chemicals to prevent scale

• Wet / dry operation is controlled based on ambient

CUSTOMIZATIONS• Low-noise fans

• Corrosion resistant coil options

• Variable speed and ECM fan options for optimal full and part-load efficiency

• Explosion proof

• Microprocessor controls to optimize water usage

• Can be sized to meet full-load without water, avoiding costly emergency water makeup storage tanks

consumption can be reduced by up to 80 – 90% compared to a cooling tower, based on weather conditions in New York State. Water management and controls optimized for safe operation, mitigating the proliferation of Legionella. Adiabatic Cooling technology can be applied to air cooled chillers, fluid coolers, condensers and condensing units.

Adiabatic Cooling Designed Into Chiller Package

FLUID COOLERSOur dry fluid coolers are unparalleled in capacity range and packaging options. With a large assortment of features and customizations, our built-to-order fluid coolers can be made to be fit both your performance and design requirements. Pre-programmed onboard controls can be added to optimize energy savings. Apply Adiabatic Cooling to your fluid cooler for increased energy efficiency. Call Eagle Bay Refrigeration for a free energy efficiency and return on investment analysis for your application.

All our products are built in the USA at RAE Corporation's factory in Pryor Oklahoma. Products come factory built and tested, significantly reducing installation time and cost. Equipment arrives fully functional minimizing on-site field work and costly startup modifications. Our equipment factory testing includes boiler bank for sustained load, proper operation verification, electrical point-to-point wiring testing, and pressure leak testing.

PRODUCT FEATURES• Water side economizer system

• Pre-programmed onboard controls for completely independent operation

• Fully integrated pumping and hydronic packages

• Factory mounted waterside economizer valves

CUSTOMIZATIONS• Low sound levels • Adiabatic cooling option for increased

energy efficiency

• Explosion Proof• Corrosion resistance

• Multiple Profile Sizes• Multiple circuiting options to reduce pressure

losses• Single, Dual, Multiple pump options with integral

N+1 redundancy options• Variable speed and ECM fan options for optimal

full and part-load efficiency

One of our Fluid Coolers

09

10

PUMPING SYSTEMSOur pre-manufactured pumping packages save you money by allowing a single source responsibility and reducing installation time and costs. These units are available as either stand-alone packages or integral to our fluid cooler or chiller packages. Our pumping systems are designed with features and components to fit your exact needs. These units can include Primary

All our products are built in the USA at RAE Corporation's factory in Pryor Oklahoma. Products come factory built and tested, significantly reducing installation time and cost. Equipment arrives fully functional minimizing on-site field work and costly startup modifications. Our equipment factory testing includes full and part load functional testing, electrical point-to-point wiring testing, and pressure leak testing.

PRODUCT FEATURES• Single, dual, and multiple pump arrangements

from 3/4” to 12” pipe sizes

• Horizontal or Vertical in-line pumps, either close coupled or base mounted

• Open construction for indoor locations

• Single un-insulated or dual wall insulated cabinetry for outdoor applications

• Optional interior cooling and heating

• Optional shell and tube or plate and frame secondary heat exchangers

CUSTOMIZATIONS• Explosion Proof Design Options

• Variable frequency drives for pumps

• Corrosion resistant Heat-Exchangers for specialty applications

• Storage tanks for additional fluid volume

• Temperature control valves for applications requiring precise supply water control

• Lead / lag and Automatic changeover controls to maximize pump uptime and equal run time

• Microprocessors controls for stand-alone operation of the entire skid

and Secondary loops, secondary heat exchangers, tanks, air separation, control values, and hydronic trim. Ultimately, we build our pumps according to your needs, whither it’s for hot, chilled, or ground water systems, condenser loops, or process flow.

One of our Pumping Packages

Along with meeting your exacting requirements, we can also ship your coils fast. We stock many high-volume models, have a 16-day standard shipping lead-time and for those critical applications we offer 24-hour, 2 day, 3 day and 4-day premium shipping options.

COIL OVERVIEW

COIL OFFERINGS CUSTOMIZATIONS• Booster Coils

• Evaporator / Direct Expansion (DX) Coils

• Condenser Coils

• Hot Water Coils

• Chilled Water / Glycol Coils

• Steam / Steam Distributing Coils

• Fluid Coils

• Industrial Coils

• Multiple Size Profiles

• Various Fin and Tube Thickness

• Various Casing Size and Material

• Galvanized steel, stainless steel, aluminum, and copper tube sheet materials

• Quality Tested at 400 psi Underwater

• Coils Certified to AHRI Standard 410

11

We offer an assortment of HVAC coils including a complete line of heating, cooling, and industrial coils for new construction, OEM, and replacement coil needs. We work with you to select the optimal coil for your application. One that will provide many years of reliable service at a cost-effective price without compromising system efficiency. We work with you to

identify the optimal design configuration, and provide a performance summary and drawing with each selection. Please call us to discuss custom coils that may have extreme or unusual requirements.

Available on select models. Call us today for a ship date 315.320.6385

Evaporative Coils

12

COOLING COILS

COILS TYPES

Fluid Coils

• 1⁄2” or 5/8” copper tubes upto 0.049” tube thickness

• 304, 316, or 16-guage G-90galvanized sheet steel casing

• Excellent fin/tube bond on stainless steel and steel tubing to retain

• 304, 316, or 16-guage G-90 galvanized sheet steel casing

• Welded tube-to-header joint for corrosive atmospheres and temperature/pressure extremes.

• Many configurations available

• 3/8”, 1/2” or 5/8” copper tubes• 16-guage G-90 galvanized sheet steel casing• Many configurations available• 4 – 14 fins per inch available• Single fin heights available up to 52.5”

INDUSTRIAL COILS• Many configurations available

Steam Coils Hot Water Coils Booster Coils

HEATING COILS

Available on select models. Call us today for a ship date 315.320.6385

INSULATED COIL BOXES

13

Our insulated coil boxes can be used for heating, cooling, or dehumidification processes, and for applications requiring coils with a wash-down / stainless steel interior or tight casing. Insulated coil boxes are ideal for pharmaceutical processes, food storage, health care needs, and high-rise buildings. They are useful when maintaining different space

temperatures by room, floor or zone.” Unlike field-manufactured coil boxes, our design ensures no air leakage around the coil, coil connections and access panel. The cooling coil is housed in an easy-to-install, insulated component box with correctly pitched condensate pan and drain connection.

STANDARD FEATURES• Double wall construction with 2” fiberglass

insulation

• Connections extend 4” past box exterior

• 18-gauge stainless steel interior construction

• 16-gauge galvanized steel exterior

• 18-guage stainless steel drain pain double-pitched to single low point per IAQ standard

• 1 - ½’’ duct flanges on entering and exiting air side of housing

• 1” z, 304 stainless steel coupling in drain pan

• Mechanically fastened access/coil removal panel in header end

AVAILABLE OPTIONS• Dual coils mounted in series in common coil box • 1”, 3”, and 4” box wall thicknesses available

• Painted galvanized steel exterior• 304 stainless steel interior• 304 stainless steel exterior, unpainted

• Options for ceiling or floor mounting

• Dual coils mounted in series in common coil box• 1” MPT, 304 stainless steel overflow drain

coupling

• 16-gauge, break-form slide filter rack with side access through removable panel

• 3/8” MPT brass vent and drain extended 4” past box exterior

14

DESATURATION COOLING COILS

FEATURES AND CUSTOMIZATIONS• For Hospitals, Laboratory, and Other Clean Rooms

• Humidification and Mold Concerned Areas

• 3/8”, ½”, or 5/8” copper tubes up to 0.049” tube thickness

• 4 to 14 fins per inch with heights up to 52.5” in a single fin

• Leak tested underwater to 400 psi

• No Additional Installation Piping or Electrical Work

Leaving air conditions in cooling applications are likely to approach full saturation, which can result in excessive moisture condensing on filters, equipment, or duct work. This damp environment can lead to mold formation, corrosion and equipment failure. Our desaturation cooling coils are easy to install, require no moving parts or electrical connections and

can solve your humidity and coil replacement issues by reheating the supply air temperature after removing excessive moisture from the airstream. The reheat energy is extracted from the supply air stream, increasing overall energy efficiency and avoiding the complexity associated with other types of reheat.

CONTACT EAGLE BAY REFRIGERATIONMichael.Collins@EagleBayRefrigeration.com

www.EagleBayRefrigeration.comW: (315) 320-6385M: (315) 385-1809