E385_GB1
-
Upload
franciscooliveira -
Category
Documents
-
view
10 -
download
0
description
Transcript of E385_GB1
-
E385_GB 13-01-2006 12:50 Pagina 2
Colori compositi
C M Y CM MY CY CMY K
E385
E385 E385BEH
net flywheel power 212 kW - 288 hp
operating weight (MAX) 38 450 kg 37 000 kg
bucket capacity 0.72-1.8 m3 1.12-2.10 m3
PROVEN PERFORMANCE
-
E385_GB 13-01-2006 12:50 Pagina 3
Colori compositi
C M Y CM MY CY CMY K
E385*
2
* A product of the global alliance between CNH and KOBELCO
The lift cylinders incorporate an automatic energyrecovery system which acts as a shock-absorber,providing outstanding stability when boom loweringstops suddenly and when starting or ending diggingoperations.In addition, all cylinders are equipped with an integratedhydraulic cushioning system which eliminates bumpsand consequent shocks on the whole structure whenthe pistons reach their stroke end.
SUPERIORLIFTING CAPACITYAND DyNAMICSTABILITYThe NEW HOLLAND KOBELCO E385 featuresoutstanding lifting capacity (LC version: 8.9 ton sideat 6.0 m), providing superior performance in any job.
THE PERFO
-
E385_GB 13-01-2006 12:50 Pagina 4
Colori compositi
C M Y CM MY CY CMY K
3
FORMANCE
BREAKOUT FORCEThe outstanding breakout force of the E385 (24.000 daN with continuousPower Boost) is enhanced by superior stability.The machine weight is strategically distributed in the structure to provide full exploitationof power and breakout force whilst avoiding unpleasant jumping effects.
E385BEH VERSIONWHEN HIGH PRODUCTIVITY IN LOADINGAPPLICATIONS IS REQUIRED
RESPECT FOR THE ENVIRONMENTThe E385 respects the European "reduced noise level" asper directive 2000/14/EC phase 2.
-
E385_GB 13-01-2006 12:50 Pagina 5
Colori compositi
C M Y CM MY CY CMY K
E385
4
SMART HYDRAULIC SYSTEM
The intelligent hydraulic system S.H.S. (Smart HydraulicSystem) interacts continuously with the on-boardcomputer A.I. (Artificial Intelligence).This combination of highly advanced electronic technologyand a sophisticated, but simple, hydraulic system, deliversperformance and versatility that breaks the rules. Itrepresents an evolution not available from othermanufacturers, with power supplied "on demand" bytwo variable displacement axial piston pumps.
-
E385_GB 13-01-2006 12:50 Pagina 6
Colori compositi
C M Y CM MY CY CMY K
3
H/M
W
A
5
MONITOR E.T.U.The multifunction monitor E.T.U. (Easy To Use), located in an ergonomic positioneasy to reach, to read and to understand, features the following main functions:
Allow selection of 3 working modes:W (Normal work mode); H/M (Heavy/Mechatronic mode), and A (Attachments mode).Displays maintenance information and system warningsMemorises 32 errors monitored by the auto-diagnosis system
ELECTRONICPUMP CONTROL& POWER BOOSTPrecisely and promptly following the manipulators' strokes,
the on-board computer enables the operator to get exactlythe response he wants: outstanding controllability andsimultaneity of movements.Unique among all main competitors, the NEW HOLLANDKOBELCO machine allows the operator to continuouslyuse the Power Boost function so that he can work withoutproblems or interruptions until the job is finished!
WORKING MODE SYSTEM
M.W.S.MECHATRONIC
WORK SELECTOR
Computer
Sensor
Elet
roni
cgo
vern
or c
ontr
ol
Oil f
low
con
trol
Maincontrolvalve
Pump
Control leverEngine
Oil f
low
HEAVY/MECHATRONIC MODEMaximum hydraulic power for topproductivity. In this mode, the unitlearns the type of operationbeing completed after 2 cyclesand automatically selectsmaximum efficiency/speedand operating precisionwith the A.P.S. (AutomaticPriority System) device.
STANDARD MODENormal operating mode.
ATTACHMENTS MODEThe operator can controlpump flow from his seatto match the attachmentbeing used. Duringoperation, the systemautomatically adjuststhe flow to a preset valuewhilst maintaining normalhydraulic flow to otheroperations.
Digging Levelling Spreading
-
E385_GB 13-01-2006 12:50 Pagina 7
Colori compositi
C M Y CM MY CY CMY K
E385
6
THE POWER
-
E385_GB 13-01-2006 12:50 Pagina 8
Colori compositi
C M Y CM MY CY CMY K
R OF CONTROL
AUTOMATICDOWNSHIFTThe double displacement axial piston
travel motors feature two travel speeds,which can be selected by the operator:
High speed for fast transfer movementLow speed, when a high traction forceis required
If ground conditions demand a highertraction force when "High Speed" isselected, the travel motors shiftautomatically to maximum displacement,thus reducing speed and increasingtraction force.
ELECTRONICACTIVE CONTROLSensors located in all pilot lines send signals
to the computer in respect of manipulatorstrokes. These signals provide the engine with the necessary input to determine the rpmrequired to ensure the correct oil flow to carryout the required function. As a result, themachine offers extremely smooth and precisecontrols, with excellent stability and steadyspeed during simultaneous operations.
-
E385_GB 13-01-2006 12:50 Pagina 9
Colori compositi
C M Y CM MY CY CMY K
8
E385 HIGH RELIABILITY AND DURABILITY
NEW ISUZU ENGINEHIGH PERFORMANCELOW FUELCONSUMPTIONThis engine belongs to the new generation family of ISUZU
diesel engines which conform to the European standard97/68/EC (Tier 3A). Six cylinders, 7.8 litres, direct injection,turbocharged with intercooler. Combined with the electronicE.S.S.C. (Engine Speed Sensing Control) allowing fullexploitation of the installed hydraulic power, the new engineis designed for outstanding productivity. It also features, asstandard, a -15C outside temperature start.
-
E385_GB 13-01-2006 12:50 Pagina 10
Colori compositi
C M Y CM MY CY CMY K
9
ARM REINFORCEMENTStandard booms are heavy duty type to totallyand continuously exploit the exceptional lifting capacityand the mighty breakout force. A standard antiwear plateis welded at the top of the arms to enhance the machinecapability to operate in the most severe applications.
BUCKET LINKAGEThe lever of the bucket linkage is madein one piece to improve reliability and to reducedown time when changing buckets.It incorporates a safety lifting hook with loadhandling option, thus increasing machine versatilityand safety.
SAFETY VALVESSafety anti-drop valves (suppliedas standard on the triple articulationversion) are available (optional) forlifting and dipperstick cylinders, tocomply with European safetyregulations when the machine is usedin load handling applications.
-
E385_GB 13-01-2006 12:50 Pagina 11
Colori compositi
C M Y CM MY CY CMY K
E
10
2990 mm
4050 mm
UNDERCARRIAGEThe EL version can be supplied with a monobloc ortriple articulation boom.The long undercarriage ensures outstanding front stability.Machine transportation is facilitated by its under 3.0metre width, with 600 mm shoes.
ROLLERSAND CHAINSStandard sealed and lubricated rollers
and track chains are Heavy Duty type,to grant an outstanding strength and durability
in the toughest applications.
HEAVY DUTYUPPERSTRUCTUREFollowing stringent bench tests and the toughest
possible field tests, the upper-structure has beencompletely re-designed and strengthened, and isable to handle any kind of job without problems.
-
E385_GB 13-01-2006 12:50 Pagina 12
Colori compositi
C M Y CM MY CY CMY K
E385
11
COMFORT& MAINTENANCE
-
E385_GB 13-01-2006 12:50 Pagina 13
Colori compositi
C M Y CM MY CY CMY K
E385
12
CABAn outstanding innovative and roomy working environment built with the most advanced car type technology(pressed steel plates) with reinforced pillars to provide added strength. High Space cab and perfect visibility in all directionsthanks to the wide glass surface and transparent cab roof. Extremely low noise level and effective reduction of vibrationsare granted by elasto-viscous dampers which connect the cab to the upperstructure. All controls are within hand reachand are ergonomically positioned: more like a "living room" than a cab, providing maximum operator comfort.
RIGHTMANIPULATORThe right manipulator, with its perfect sensitivity,
allows the operator smooth control of the boomand bucket movements.Continuous Power Boost actuation button ispositioned on the top.
LEFTMANIPULATORAgain with exceptional sensitivity, the operator
can manoeuvre the left manipulator whichcontrols the dipperstick movement and theswinging of the upperstructure. The horn is
positioned on the top.
PEDALSWith the best layout in the industry, theoperator can use any pedal with no risk of
interference. He can also enjoy two large foot-rest supports.
In addition to the control of forward-reverse forleft and right tracks, there are two other
independent pedals to operate the positioningcylinder (in the triple articulation version) and
special applications tools.
WORK IN COM
-
E385_GB 13-01-2006 12:50 Pagina 14
Colori compositi
C M Y CM MY CY CMY K
13
RUBBER CUSHION
FLOOR PLATE
DAMPERPLATE
SILICON OIL
AUTOMATICAIR CONDITIONINGAutomatic air conditioning is offered as standard
- the operator need only set the required temperature.The system will maintain the temperature and keep
windows clear in any climate conditions.
COURTESY BOXPositioned behind the operator seat, the courtesybox provides a large area for personal objects.
It includes a specific compartment to storeservice/operator manuals and documents, as well
as a net to hold small objects and papers.
DAMPERSThe cab is connected to the upperstructurewith elasto-viscous (rubber and silicone oil)
dampers to effectively reducevibrations and noise.
SEATThe ergonomic seat, heated and mechanicallyor air (optional) suspended, can be adjusted
to all positions, either independently or togetherwith the control consoles to provide maximum
operator comfort and stability.
OMFORT...
-
E385_GB 13-01-2006 12:50 Pagina 15
Colori compositi
C M Y CM MY CY CMY K
E385
14
The practical and accessible layout of all components allows easy and time-saving maintenance procedures.Some components, such as the diesel-water separator, are conveniently remotely positioned, as is the engine
oil filter, which is also mounted in a vertical position to avoid oil spillage.
EASY MAINTENANCE
AIR FILTERThe most efficient air filtering system, incorporating a cyclone pre-filter, a twin cartridge filterand a dust ejector, provides maximum engine efficiency and easy maintenance.
RADIATORSAll radiators are made with aluminium and provideextremely efficient heat exchange together with along, rust-free life. To reduce pollution, a cooling fuelradiator has been added.
ELECTRIC FUEL PUMPThe electric fuel pump, conveniently located underthe upperstructure steps, is supplied as standardequipment to refill the machine quickly and on anyjob site.
FUSES Fuse and relay are properly protected by a sealed
box in the roomy left hand side of the machine.Easy to reach, easy to check, to dramatically reduce
maintenance and service down time.
CENTRALISED GREASING Boom maintenance is effectively improved thanks toa centralised greasing system, which allows all wear
points to be easily greased from ground level. Thegreasing interval has been raised to 500 hours.
-
E385_GB 13-01-2006 12:50 Pagina 16
Colori compositi
C M Y CM MY CY CMY K
The New Holland dealer network is, in itself, thebest guarantee of continued productivity for the machinesit delivers to its customers. New Holland service techniciansare fully equipped to resolve all maintenance and repairissues, with each and every service point providing the highstandards they are obliged to observe under New Holland'sstringent quality guidelines.The New Holland global parts network ensures fast, reliable,replacement parts for less downtime, increased productivityand, of course, profitable operation for its customers.
PARTS & SERVICE
A critical business partner and leading finance solutionsprovider, CNH Capital is making it easier than ever for you toacquire and finance top quality construction equipment.
Whether you are operating your own equipment, or managinga fleet of several hundred units, CNH Capital's focus is onyou, our customer, your business success and the successof the dealer network that supports you.
By listening to your needs, and those of our constructionequipment dealers, and by offering the right mix of products,flexible terms and competitive finance rates, CNH Capitalstrengthens the bond between our customers, our dealersand our manufacturing facilities.
When the best equipment deserves the best financing solution,you can count on CNH Capital as a specialist in the field ofconstruction equipment.
With CNH Capital, let us find the best financing solution tomeet your needs so you can focus on your day to day businessand on getting the very best out of your equipment.
FINANCIAL SERVICES
-
E385_GB 13-01-2006 12:50 Pagina 17
Colori compositi
C M Y CM MY CY CMY K
E
16
E385Net flywheel power (ISO 14396) ................................212 kW / 288 hpRated rpm...................................................................................2000Make and model.............................................ISUZU 6HK1XDHAA-02Type .............................diesel, 4-stroke, direct injection, turbochargedTotal Displacement........................................................................7.8 lNumber of cylinders ..........................................................................6Bore x stroke ................................................................115 x 125 mmMaximum torque at 1500 rpm...............................................1125 NmRemote engine oil filter for easy replacementEngine rpm electronic control with knob selectorAutomatic Idling return selector with Auto-Idling controls in neutralStart at -15 outside temperature as standard equipment.The engine conforms to European requirements for low exhaustemission in accordance with directive 97/68/EC TIER 3A
Operating voltage.........................................................................24 VAlternator ................................................................................50 AmpStarter motor...............................................................................5 kWStandard maintenance-free batteries .................................................2Capacity...................................................................................160 Ah
New S.H.S. (Smart Hydraulic System) for perfect controllability andsimultaneity of all movementsNew generation A.I. (Artificial Intelligence) on-board computerA.P.S. (Automatic Priority System) deviceHydraulic valve, rod opening and pump delivery computerisedcontrol according to manipulator travelE.S.S.C. (Engine Speed Sensing Control) device for total use ofinstalled hydraulic powerHigh definition E.T.U. (EASY TO USE) multifunction monitorincorporating:- Maintenance programme- Self Diagnosis System- Operating Data Storage (rpm/operating pressure and the like)
Mechatronic Work Selector (M.W.S):- Standard Mode (W) - Standard operating mode- Heavy/Mechatronic Mode (H/M) - Maximum hydraulic power fortop productivity. In this function, the machine learns the work cycleit operates after 2 cycles and automatically selects maximumefficiency/speed and operating precision with the A.P.S. (AutomaticPriority System) device.- Attachments Mode (A) - Possible selection and storage ofsupplementary implement delivery from the cab.Power Boost Device: Continuous input; when selected, devicecontinuous operation ensures maximum diggability/productivity in thetoughest applications.Double delivery device supplied standardPiping pressure release push button: to facilitate tooling changewithout oil loss from piping.Hammer/two-directional pincer systemMain pumps:two variable delivery pumps with electronic delivery adjustment.With controls on neutral, the pumps automatically move to displacementposition 0.Maximum delivery ...........................................................2 x 276 l/minPiloting circuit gear type pumpMaximum delivery ...................................................................20 l/min
Maximum operating pressure:Tooling/swing/travel..............................................................34.3 MPaPower Boost ........................................................................37.8 MPaHydraulic cylinders ..........................................................double effect- Lift (2) - bore x stroke ...............................................140 x 1542 mm- Penetration (1) - bore x stroke ..................................175 x 1790 mm- Bucket (1) E385 - bore x stroke ................................145 x 1250 mm- Bucket (1) E385BEH - bore x stroke.........................150 x 1250 mm- Positioning (only triple articulation) bore x stroke ............................................................170 x 1335 mm
Type .................................................................two-speed hydrostaticMotors .....................................axial piston double displacement type,
collapsible into track carriageBrakes.................................................................automatic discs typeFinal drive ................................................................oil bath epicyclicalMaximum slope .................................................70% (35) continuousTravel speeds:
slow ...................................................................0 to 3.4 km/hhigh....................................................................0 to 5.8 km/h
Automatic DownShift device: with selector on fast in case of needfor more traction force, adjusts travel motors to maximum displacement.
Swing motor...............................................................axial piston typeSwing brake........................................................automatic, disc typeFinal drive ................................................................oil bath epicyclicalSlew ring ...................................................................grease bath typeSwing speed ...........................................................................9.6 rpm
Transparent upper canopy.Standard automatic conditioning.Controls ....................................................................................pilotedTwo cross travel levers control all tool movements and superstructureswing.Two non-removable lever pedals control all track movements, counter-rotation included.A safety lever neutral ises the piloting circuit completely.
X-design undercarriageSealed bushing reinforced track HD chain
E385EL/E385BEH E385LCTrack rollers (each side) 9 9Carrier rollers (each side) 2 2Length of track on ground (mm) 4050 4050Gauge (mm) 2390 2590Shoes available (mm) 600-700 600-700
800 800-900
litresLube oil ...........................................................................................35Antifreeze mixture............................................................................39Fuel ...............................................................................................560Hydraulic system...........................................................................320
SPECIFICATIONS
ENGINE TIER 3A
ELECTRICAL SYSTEM
HYDRAULIC SYSTEM
TRANSMISSION
SWING
CAB AND CONTROLS
UNDERCARRIAGE
CAPACITIES
-
E385_GB 13-01-2006 12:50 Pagina 18
Colori compositi
C M Y CM MY CY CMY K
E385
17
13
12
11
10
9
8
7
6
5
4
3
2
1
0
1
2
3
4
5
6
7
8
12 11 10 9 8 7 6 5 4 3 2 1 0
12 11 10 9 8 7 6 5 4 3 2 1 0
E
C
D
2440mm
A'A
BB'
G
MN
L
I
H F
ED
C
AB
Dipperstick: (1) 2330 mm - (2) 2600 mm - (3) 3300 mm - (4) 4150 mm
DIMENSIONS (mm) - OPERATING WEIGHTTriple articulaTIon
DIGGING PERFORMANCE
M - Shoe width mm
N - Maximum width mm
Operating weight kg
Specific ground pressure bar
E385LC
600 700 800 900
3190 3290 3390 3490
36950 37450 37950 38450
0.75 0.65 0.57 0.52
E385EL
600 700 800
2990 3090 3190
36300 36760 37260
0.73 0.64 0.56
Version A B C D E F G H I L
(1) 11123 (1) 3275
E385EL 4050 4980 1240 3342 (2) 11033 (2) 3347 2950 3200 1073 533
(3) 11000 (3) 3315
(4) 11026 (4) 3673
(1) 11123 (1) 3275
E385LC 4050 4980 1240 3342 (2) 11033 (2) 3347 2950 3200 1073 533
(3) 11000 (3) 3315
(4) 11026 (4) 3673
DIPPERSTICK mm 2330 2600 3300 4150
BREAKOUT FORCE:
BUCKET daN
DIPPERSTICK daN
22000 22000 22000 22000
22500 20200 16000 13500
A mm
A mm
B mm
B mm
C mm
D mm
E mm
10378 10652 11299 12091
10155 10435 11094 11900
6015 6291 6966 7791
5907 6187 6872 7706
11961 12205 12726 13354
8674 8942 9452 10071
3149 3062 2848 3049
24000 24000 24000 24000
25000 22400 17700 15000
BUCKET daN
DIPPERSTICK daN
WITHPOWER BOOST ON:
-
E385_GB 13-01-2006 12:50 Pagina 19
Colori compositi
C M Y CM MY CY CMY K
E385
18
11
10
9
8
7
6
5
4
3
2
1
0
1
2
3
4
5
6
7
8
12 11 10 9 8 7 6 5 4 3 2 1 0
E
A'A
B'B
C
D
2440mm
G
H
I
LMN
F
ED
C
AB
M - Shoe width mm
N - Maximum width mm
Operating weight kg
Specific ground pressure bar
E385LC
600 700 800 900
3190 3290 3390 3490
36100 36510 37000 37500
0.73 0.63 0.56 0.50
E385EL
600 700 800
2990 3090 3190
35500 35910 36400
0.72 0.62 0.55
Dipperstick: (1) 2330 mm - (2) 2600 mm - (3) 3300 mm - (4) 4150 mm
DIMENSIONS (mm) - OPERATING WEIGHT
Versions A B C D E F G H I L
(1) 11185 (1) 3494
E385EL 4050 4980 1240 3342 (2) 11115 (2) 3640 2950 3200 1073 533
(3) 11050 (3) 3353
(4) 11089 (4) 3358
(1) 11185 (1) 3494
E385LC 4050 4980 1240 3342 (2) 11115 (2) 3640 2950 3200 1073 533
(3) 11050 (3) 3353
(4) 11089 (4) 3538
MONOBLOC VERSIoN
10304 10573 11186 11946
10079 10354 10980 11753
6412 6682 7382 8232
5207 6497 7224 8099
10146 10352 10563 10830
7099 7235 7476 7767
4377 4352 4300 4385
DIGGING PERFORMANCE
DIPPERSTICK 2330 2600 3300 4150
24000 24000 24000 24000
25000 22400 17700 15000
WITHPOWER BOOST ON:
BUCKET daN
DIPPERSTICK daN
A mm
A mm
B mm
B mm
C mm
D mm
E mm
BREAKOUT FORCE:
22000 22000 22000 22000
22500 20200 16000 13500
Bucket daN
DIPPERSTICK daN
-
E385_GB 13-01-2006 12:50 Pagina 20
Colori compositi
C M Y CM MY CY CMY K
19
10
9
8
7
6
5
4
3
2
1
0
1
2
3
4
5
6
10 9 8 7 6 5 4 3 2 1 0
A'A
2440mm
BB'
C
D
E
G
H
I
LMN
F
ED
C
AB
DIMENSIONS (mm) - OPERATING WEIGHT
Version A B C D E F G H I L
E385BEH 4050 4980 1240 3342 10480 3620 2950 3200 1073 533
DIGGING PERFORMANCE
BEH
DIPPERSTICK mm 2150
A mm
A mm
B mm
B mm
C mm
D mm
E mm
BREAKOUT FORCE:
WITHPOWER BOOST ON:
BUCKET daN
DIPPERSTICK daN
BUCKET daN
DIPPERSTICK daN
22000
23500
24000
25000
9465
9219
5565
5362
9778
6635
3788
M - Shoe width mm
N - Maximum width mm
Operating weight kg
Specific ground pressure bar
E385BEH
600 700 800
2990 3090 3190
36000 36500 37000
0.72 0.63 0.56
-
E385_GB 13-01-2006 12:50 Pagina 21
Colori compositi
C M Y CM MY CY CMY K
20
E385
As per ISO 10567 with excavator equipped with bucket. The indicated load is no more than 87% of hydraulic system lift capacity or 75% of statictipping load. Values marked with an asterisk are limited by the hydraulic system.
+6.0 m+4.5 m+3.0 m+1.5 m
0 m-1.5 m-3.0 m-4.5 m
R A D I U S O F L O A D
+6.0 m+4.5 m+3.0 m+1.5 m
0 m-1.5 m-3.0 m-4.5 m
HEIGHT
+6.0 m+4.5 m+3.0 m+1.5 m
0 m-1.5 m-3.0 m-4.5 m
HEIGHT
+6.0 m+4.5 m+3.0 m+1.5 m
0 m-1.5 m-3.0 m-4.5 m
HEIGHT
HEIGHT
7.7 * 7.7 * 7.1 * 6.8 6.9 * 5.9 8.0811.0 * 11.0 * 8.8 * 8.8 * 7.6 * 6.5 7.0 * 5.1 8.6413.4 * 13.0 10.0 * 8.7 8.2 * 6.3 7.2 * 4.7 8.9215.1 * 11.9 11.0 8.2 8.8 * 6.0 7.4 * 4.6 8.9415.7 * 11.6 11.6 * 7.9 9.2 * 5.8 7.7 * 4.7 8.71
19.5* 19.5 * 15.3 * 11.7 11.6 * 7.9 9.1 * 5.8 8.1 * 5.1 8.1918.6* 18.6 * 14.1 * 12.2 10.8 * 8.0 8.4 * 6.0 7.33
11.5 * 11.5 * 8.5 * 8.3 5.98
7.7 * 7.7 * 7.1 * 7.1 * 6.9 * 6.6 8.0811.0 * 11.0 * 8.8 * 8.8 * 7.6 * 7.3 7.0 * 5.7 8.6413.4 * 13.4 * 10.0 * 9.7 8.2 * 7.0 7.2 * 5.3 8.9215.1 * 13.4 11.0 * 9.2 8.8 * 6.7 7.4 * 5.1 8.9415.7 * 13.1 11.6 * 8.9 9.2 * 6.5 7.7 * 5.3 8.71
19.5* 19.5 * 15.3 * 13.3 11.6 * 8.8 9.1 * 6.5 8.1 * 5.7 8.1918.6* 18.6 * 14.1 * 13.8 10.8 * 9.0 8.4 * 6.8 7.33
11.5 * 11.5 * 8.5 * 8.5 * 5.98
E385EL TRIPLE ARTICULATION
E385LC TRIPLE ARTICULATION
E385EL MONOBLOC
E385LC MONOBLOC
11.2 * 11.2 * 8.4 * 8.4 * 6.6 * 6.6 * 6.0 * 5.6 8.2714.2 * 14.2 * 9.3 * 9.3 * 6.9 * 6.5 5.7 * 4.9 8.8316.0 * 13.1 10.8 * 8.6 7.4 * 6.1 5.6 * 4.5 9.10
16.0 * 12.2 11.8 * 8.1 8.0 * 5.9 5.7 * 4.3 9.1214.5 * 11.8 11.2 * 7.8 8.4 * 5.7 6.0 * 4.5 8.8712.0 * 11.9 9.7 * 7.7 7.4 * 5.6 5.9 * 4.9 8.38
7.1 * 7.1 * 5.2 * 5.2 * 7.41
11.2 * 11.2 * 8.4 * 8.4 * 6.6 * 6.6 * 6.0 * 6.0 * 8.2714.2 * 14.2 * 9.3 * 9.3 * 6.9 * 6.9 * 5.7 * 5.4 8.8316.0 * 14.8 10.8 * 9.6 7.4 * 6.9 5.6 * 5.0 9.1016.0 * 13.8 11.8 * 9.1 8.0 * 6.6 5.7 * 4.9 9.1214.5 * 13.5 11.2 * 8.8 8.4 * 6.4 6.0 * 5.0 8.89
12.0 * 12.0 * 9.7 * 8.7 7.4 * 6.4 5.9 * 5.5 8.38 7.1 * 7.1 * 5.2 * 5.2 * 7.41
SIDEFRONTSIDEFRONT SIDEFRONT SIDEFRONTSIDEFRONT
AT MAX. REACH
REACHm
3.0 m 4.5 m 6.0 m 7.5 m
LIFTING CAPACITY2330 mm DIPPERSTICK VALUES ARE EXPRESSED IN TONNES
-
E385_GB 13-01-2006 12:50 Pagina 22
Colori compositi
C M Y CM MY CY CMY K
21
LIFTING CAPACITY2600 mm DIPPERSTICK VALUES ARE EXPRESSED IN TONNES
As per ISO 10567 with excavator equipped with bucket. The indicated load is no more than 87% of hydraulic system lift capacity or 75% of statictipping load. Values marked with an asterisk are limited by the hydraulic system.
+6.0 m+4.5 m+3.0 m+1.5 m
0 m-1.5 m-3.0 m-4.5 m
+6.0 m+4.5 m+3.0 m+1.5 m
0 m-1.5 m-3.0 m-4.5 m
HEIGHT
+6.0 m+4.5 m+3.0 m+1.5 m
0 m-1.5 m-3.0 m-4.5 m
HEIGHT
+6.0 m+4.5 m+3.0 m+1.5 m
0 m-1.5 m-3.0 m-4.5 m
HEIGHT
HEIGHT
10.6 * 10.6 * 8.1 * 8.1 * 6.4 * 6.4 * 5.5 * 5.1 8.6313.2 * 13.2 * 9.0 * 9.0 * 6.6 * 6.5 5.2 * 4.5 9.1615.7 * 13.3 10.4 * 8.7 7.2 * 6.1 5.1 * 4.2 9.43
16.1 * 12.2 11.7 * 8.1 7.7 * 5.8 5.2 * 4.1 9.4514.9 * 11.8 11.3 * 7.8 8.2 * 5.6 5.5 * 4.1 9.2212.6 * 11.8 9.9 * 7.6 7.6 * 5.6 5.6 * 4.5 8.74
9.3 * 9.3 * 7.6 * 7.6 * 5.4 * 5.4 * 4.5 * 4.5 * 7.94
10.6 * 10.6 * 8.1 * 8.1 * 6.4 * 6.4 * 5.5 * 5.5 * 8.6313.2 * 13.2 * 9.0 * 9.0 * 6.7 * 6.7 * 5.2 * 5.1 9.1615.7 * 14.9 10.4 * 9.7 7.2 * 6.9 5.1 * 4.7 9.4316.1 * 13.9 11.7 * 9.1 7.7 * 6.6 5.2 * 4.6 9.4514.9 * 13.4 11.3 * 8.8 8.2 * 6.4 5.5 * 4.7 9.2212.6 * 12.6 * 9.9 * 8.6 7.6 * 6.3 5.6 * 5.1 8.749.3 * 9.3 * 7.6 * 7.6 * 5.4 * 5.4 * 4.5 * 4.5 * 7.94
6.7 * 6.7 * 6.5 * 5.4 8.4010.4 * 10.4 * 8.3 * 8.3 * 7.2 * 6.5 6.6 * 4.7 9.0012.9 * 12.9 * 9.6 * 8.7 7.9 * 6.2 6.7 * 4.4 9.2014.7 * 12.0 10.8 * 8.2 8.6 * 5.9 7.0 * 4.2 9.2015.6 * 11.5 11.5 * 7.8 9.0 * 5.7 7.3 * 4.3 9.00
18.0* 18.0* 15.5 * 11.7 11.6 * 7.8 9.0 * 5.7 7.6 * 4.7 8.5019.6* 19.6* 14.5 * 12.0 11.0 * 8.0 8.3 * 5.7 7.9 * 5.5 7.7016.2* 16.2* 12.1 * 12.1 * 9.0 * 8.1 8.0 * 7.2 6.50
6.7 * 6.7 * 6.5 * 6.0 8.4010.4 * 10.4 * 8.3 * 8.3 * 7.2 * 7.2 6.6 * 5.3 9.0012.9 * 12.9 * 9.6 * 9.6 * 7.9 * 6.9 6.7 * 4.9 9.2014.7 * 13.5 10.8 * 9.1 8.6 * 6.6 7.0 * 4.7 9.2015.6 * 13.0 11.5 * 8.8 9.0 * 6.4 7.3 * 4.9 9.00
18.0* 18.0 * 15.5 * 13.2 11.6 * 8.8 9.0 * 6.4 7.6 * 5.3 8.5019.6* 19.6 * 14.5 * 13.8 11.0 * 8.9 8.3 * 6.4 7.9 * 6.1 7.7016.2* 16.2 * 12.1 * 12.1 * 9.0 * 8.9 * 8.0 * 8.0 6.50
E385EL TRIPLE ARTICULATION
E385LC TRIPLE ARTICULATION
E385EL MONOBLOC
E385LC MONOBLOC
R A D I U S O F L O A D
SIDEFRONTSIDEFRONT SIDEFRONT SIDEFRONTSIDEFRONT
AT MAX. REACH
REACHm
3.0 m 4.5 m 6.0 m 7.5 m
-
E385_GB 13-01-2006 12:50 Pagina 23
Colori compositi
C M Y CM MY CY CMY K
E385
22
LIFTING CAPACITY3300 mm DIPPERSTICK VALUES ARE EXPRESSED IN TONNES
As per ISO 10567 with excavator equipped with bucket. The indicated load is no more than 87% of hydraulic system lift capacity or 75% of statictipping load. Values marked with an asterisk are limited by the hydraulic system.
+6.0 m+4.5 m+3.0 m+1.5 m
0 m-1.5 m-3.0 m-4.5 m
R A D I U S O F L O A D
E385EL TRIPLE ARTICULATION
+6.0 m+4.5 m+3.0 m+1.5 m
0 m-1.5 m-3.0 m-4.5 m
HEIGHTE385LC TRIPLE ARTICULATION
+6.0 m+4.5 m+3.0 m+1.5 m
0 m-1.5 m-3.0 m-4.5 m
HEIGHT
E385EL MONOBLOC
+6.0 m+4.5 m+3.0 m+1.5 m
0 m-1.5 m-3.0 m-4.5 m
HEIGHT
E385LC MONOBLOC
HEIGHT7.4 * 7.4 * 5.9 * 5.9 * 4.3 * 4.3 * 9.34
17.9* 17.9 * 11.4 * 11.4 * 8.2 * 8.2 * 6.2 * 6.2 * 4.3 * 4.0 9.83 15.0 * 13.8 9.5 * 8.9 6.7 * 6.2 4.4 * 3.7 10.08 16.0 * 12.6 11.2 * 8.2 7.3 * 5.9 4.5 * 3.6 10.10 10.3* 10.3 * 15.6 * 11.9 11.5 * 7.8 7.9 * 5.6 4.7 * 3.6 9.89 14.9* 14.9 * 13.9 * 11.7 10.6 * 7.6 8.1 * 5.5 5.2 * 3.9 9.43 11.1 * 11.1 * 8.7 * 7.6 6.5 * 5.5 4.5 * 4.5 * 8.70
7.4 * 7.4 * 5.9 * 5.9 * 4.3 * 4.3 * 9.3417.9* 17.9 * 11.4 * 11.4 * 8.2 * 8.2 * 6.2 * 6.2 * 4.3 * 4.3 * 9.83
15.0 * 15.0 * 9.5 * 9.5 * 6.7 * 6.7 * 4.4 * 4.2 10.1016.0 * 14.2 11.2 * 9.3 7.3 * 6.6 4.5 * 4.1 10.10
10 .3* 10.3 * 15.6 * 13.5 11.5 * 8.8 7.9 * 6.3 4.7 * 4.1 9.8914.9* 14.9 * 13.9 * 13.3 10.6 * 8.6 8.1 * 6.2 5.2 * 4.4 9.30
11.1 * 11.1 * 8.7 * 8.6 6.5 * 6.2 4.5 * 4.5 * 8.70
6.0 * 6.0 * 4.3 * 4.3 * 9.107.5 * 7.5 * 6.6 * 6.6 * 4.4 * 4.4 * 9.60
18.3* 18.3 * 11.7 * 11.7 * 8.9 * 8.9 * 7.4 * 7.0 4.7 * 4.3 9.8011.1* 11.1 * 14.0 * 13.9 10.3 * 9.3 8.2 * 6.7 5.1 * 4.2 9.8013.0* 13.0 * 15.4 * 13.3 11.3 * 8.9 8.8 * 6.5 5.8 * 4.3 9.6016.5* 16.5 * 15.9 * 13.4 11.7 * 8.8 9.0 * 6.4 6.9 * 4.6 9.2021.5* 21.5 * 15.4 * 13.9 11.4 * 8.9 8.7 * 6.4 7.3 * 5.2 8.4019.1* 19.1 * 13.6 * 13.6 * 10.1 * 9.1 7.6 * 6.6 7.30
6.0 * 6.0 * 4.3 * 4.3 * 9.107.5 * 7.5 * 6.6 * 6.5 4.4 * 4.2 9.60
18.3* 18.3 * 11.7 * 11.7 * 8.9 * 8.9 7.4 * 6.3 4.7 * 3.9 9.8011.1* 11.1 * 14.0 * 12.4 10.3 * 8.3 8.2 * 5.6 5.1 * 3.8 9.8013.0* 13.0 * 15.4 * 11.8 11.3 * 7.9 8.8 * 5.8 5.8 * 3.8 9.6016.5* 16.5 * 15.9 * 11.8 11.7 * 7.8 9.0 * 5.6 6.9 * 4.0 9.2021.5* 21.5 * 15.4 * 12.2 11.4 * 7.9 8.7 * 5.6 7.3 * 4.6 8.4019.1* 19.1 * 13.6 * 12.8 10.1 * 8.1 7.6 * 5.9 7.30
SIDEFRONTSIDEFRONT SIDEFRONT SIDEFRONTSIDEFRONT
AT MAX. REACH
REACHm
3.0 m 4.5 m 6.0 m 7.5 m
-
E385_GB 13-01-2006 12:50 Pagina 24
Colori compositi
C M Y CM MY CY CMY K
23
LIFTING CAPACITY2150 mm DIPPERSTICK VALUES ARE EXPRESSED IN TONNES
R A D I U S O F L O A D
+6.0 m+4.5 m+3.0 m+1.5 m
0 m-1.5 m-3.0 m-4.5 m
E385BEHHEIGHT
8.7 * 8.7 * 8.5 * 7.3 6.909.7 * 9.7 * 9.0 * 9.0 * 8.4 * 6.2 8.4 * 6.1 7.509.7 * 9.7 * 9.4 * 8.3 8.7 * 6.0 8.5 * 5.5 7.90
10.0 * 9.2 9.8 * 7.3 9.0 * 5.8 8.6 * 5.4 7.9010.8 * 7.6 10.4 * 6.9 9.0 * 5.7 8.8 * 5.6 7.60
12.5* 8.7 11.8 * 8.1 10.6 * 7.3 8.8 * 6.4 7.0013.0* 13.0 * 11.5 * 10.5 8.6 * 8.2 6.00
As per ISO 10567 with excavator equipped with bucket. The indicated load is no more than 87% of hydraulic system lift capacity or 75% of statictipping load. Values marked with an asterisk are limited by the hydraulic system.
Auto-IdlingCell phone holder with charge socketCentralised boom lubricationCushioning on hydraulic cylindersCyclone prefilterDouble deliveryDouble travel speed with Automatic Down ShiftEngine rpm electronic controlFuel transfer electrical pumpGrease bath slew ringHammer/crusher system pre-dispositionHD sealed type track chainsHornHydraulic piping and connections with front sealsHydraulically suspended cab with transparent opening roof and airconditioning systemMain control valve with antidrift valves
Maintenance-free batteriesMechanically suspended heated seatMechatronic Mode SelectorMonobloc boom or triple articulation or BEHMulti-function electronic instrument panelPedal or lever travel controlPiping on hammer system boomsPower BoostPressure drain switchRadio setSmart Hydraulic SystemSwing and travel motors with automatic disc brakesTIER 3A emission diesel engineTool kitTwo working lightsTwo-speed intermittent windshield wiper
OPTIONS2600 mm dipperstick2150 mm dipperstick (BEH version)2330 mm dipperstick3300 mm dipperstick4150 mm dipperstickAir suspended heated seatCab guard (FOPS)Cab guard (front)Grab bucket/grass cutter bucket low delivery supplementary hydraulicfunction predisposition
Heavy duty, rock and special buckets with bucket/boom settingdeviceHydraulic quick coupler predispositionNorthern climate kitObject handling kitPiping on booms for supplementary low delivery functionRain protectionShoes: EL/BEH 600 mm - 700 mm - 800 mm
LC 600 mm - 700 mm - 800 mm - 900 mmSupplementary lights on cab
STANDARD EQUIPMENT
SIDEFRONTSIDEFRONT SIDEFRONT SIDEFRONTSIDEFRONT
AT MAX. REACH
REACHm
3.0 m 4.5 m 6.0 m 7.5 m
Note: standard and optional equipment may vary by country. Consult your NEW HOLLAND dealer for specific details.
* Only for E385BEH
SAE CAPACITY CECE HEAPED CAPACITY WIDTH WEIGHT
0.72 m3 0.65 m3 850 mm 852 kg
0.88 m3 0.80 m3 1000 mm 907 kg
1.12 m3 1.00 m3 1200 mm 1029 kg
1.31 m3 1.17 m3 1350 mm 1103 kg
1.50 m3 1.33 m3 1500 mm 1208 kg
1.80 m3 1.60 m3 1700 mm 1335 kg
2.10 m3* 1.80 m3* 1830 mm* 1390 kg*
BUCKETS
-
E385_GB 13-01-2006 12:50 Pagina 1
Colori compositi
C M Y CM MY CY CMY K
NEW HOLLAND IS A BRAND OF CNH.CNH: THE TOTAL SOLUTIONS CHOICE FOR YOUR SPECIFIC BUSINESS NEEDS.
The information contained in this brochure is intended to be a general nature only. The NEW HOLLAND KOBELCO CONSTRUCTIONMACHINERY S.p.A. company may at any time and from time to time, for technical or other necessary reasons, modify any of thedetails or specifications of the product described in this brochure. Illustrations do not necessarily show products in standard conditions.The dimensions, weights and capacities shown herein, as well as any conversion data used, are approximate only and are subjectto variations within normal manufacturing techniques.
Published by NEW HOLLAND KOBELCO CONSTRUCTION MACHINERY S.p.A. - www.newholland.comPrinted in Italy - LEADER Firenze - Cod. 73301221GB Printed 12/05
AT YOUR OWN DEALERSHIP
A product of the global alliance between CNH and KOBELCO