Q145

256

d14

9

d16

0 209

LED

5 C i IP 65

Technical dataLuminous flux of the luminaire 982lmConnected load 15.0WLuminaire efficacy 65lm/WColour deviation 1.5 SDCMColour rendition index CRI 92Lumen maintenance (LED manufacturerspecifications)

L90/B10 ≤50000hL90 ≤100000h

LED failure rate 0.1% ≤50000hDimming range 0.1%-100%Dimming method CCRLMF EEnergy efficiency class EEI A+Standby power per control gear 0.4WLuminaires per circuit breaker B16 205

35338.000 Graphit mLED 12W 1260lm 3000K warm whiteDALIVersion 4Spherolit lens, wallwash

Product descriptionHousing and hinge: corrosion-resist-ant cast aluminium, No-Rinse surfacetreatment. Double powder-coated.Optimised surface for reduced accumu-lation of dirt. 140° tilt, 360° rotation.Hinge with scaling and inner cablerouting.Mounting plate: polymer, coated.ERCO DALI control gear. 2 cable entries.5-pole terminal block.LED module: high-power LEDs onmetal-core PCB. Collimating lens madeof optical polymer.Light head with safety glass: corro-sion-resistant cast aluminium, doublepowder-coated. Internal anti-glarecone, polymer, black lacquered.Protection Class IIWeight 2.45kgMaximum wind load area 0.02m²Version with 3000K CRI 95 or 2700K,3500K, 4000K CRI 92 available onrequest.

Erzeugt mit dem DocScape Publisher, Regelwerk $Rev$, am 2019-4-1 um 15:54

E Kona Lens wallwasher

Technical Region: 220V-240V/50HzWe reserve the right to make technicaland design changes.Edition: 01.04.2019Current version underwww.erco.com/35338.000

For your regional contact in the ERCOSales network click herewww.erco.com/contact

© ERCO GmbH 2019

1/5

Illuminance En (lx)Specifications:Number of luminaires n > 5Wall height (m) 4.0Angle of tilt 35°LED 12W 1260lm 3000K warm white

Offset from wall (m) 1.25 1.50 1.75Luminaire spacing (m) 1.50 2.00 2.00

below theluminaire

between theluminaires

below theluminaire

between theluminaires

below theluminaire

between theluminaires

0.500 82 89 46 47 34 380.750 138 128 76 67 52 551.000 179 161 107 82 74 711.250 182 184 122 95 90 851.500 180 191 121 104 96 961.750 179 189 119 109 95 1032.000 177 182 119 109 94 1052.250 168 172 118 107 94 1052.500 154 158 114 104 94 1022.750 136 142 108 99 93 993.000 117 125 99 93 90 953.250 99 107 89 86 86 903.500 83 90 78 78 80 85

Cleaning (a) 1 2 3Ambient conditions P C N D P C N D P C N DLMF 0.96 0.94 0.90 0.86 0.93 0.91 0.86 0.81 0.92 0.90 0.84 0.79RSMF 0.99 0.97 0.95 0.92 0.98 0.97 0.95 0.92 0.98 0.97 0.95 0.92

Hours of operation (h) 1000 5000 10000 20000 30000 40000 50000LLMF 1.00 0.99 0.98 0.96 0.94 0.92 0.90LSF 1 1 1 1 1 1 1

MF LMFxRSMFxLLMFxLSFMF Maintenance FactorLMF Luminaire Maintenance FactorRSMF Room Surface Maintenance FactorLLMF Lamp Lumens Maintenance FactorLSF Lamp Survival FactorP Room pureC Room cleanN Room normalD Room dirty

Technical data in accordance with international norms and standardsIEC 60598 Luminaires – Part 1+2: general requirements, specific requirements and testsIEC 62031 LED modules for general lighting – safety requirementsIEC 62471 Photobiological safety of lamps and lamp systemsEN13032-4 Light and lighting – measurement and representation of

photometric dataCIE 13 Method of measuring and specifying colour rendering properties of light sources

All technical data is subject to industrially standard tolerances.Also see www.erco.com/erco-led

Erzeugt mit dem DocScape Publisher, Regelwerk $Rev$, am 2019-4-1 um 15:54

E Kona Lens wallwasherPlanning data

Kona Lens wallwasher35338.000

2/5

34974.000Distribution box, IP68With four cable entries, 7-25mm.Polymer.ø 102mm, L 305mm.Weight 0.47kgC IP 68 3m

300

d83

35719.000Ground spikeMetal, hot-dip galvanised.Weight 1.10kg

132

116

14

35718.000Adapter piecefor mounting on cantilever arm orattachmentStainless steel, graphit m coated.Cantilever arm or attachment to beordered separately.Weight 0.21kg

322

132

125

d13

536

34955.000Cantilever armfor standing luminaire installation onupright supporting pole ø 60–89mm orwall.Housing: stainless steel. Graphit m,powder-coated.Clamping plate or second cantileverarm for fixing on upright supportingpole to be ordered separately.Upright supporting pole ø 60-89mm tobe ordered separately.Weight 2.20kgOnly in conjunction with35718.000

132

125

55

34953.000Attachmentfor upright supporting poleø 60-89mm.Housing: stainless steel. Graphit m,powder-coated.Clamping plate or second attachmentfor fixing to be ordered separately.Upright supporting pole ø 60-89mm tobe ordered separately.Weight 1.00kgOnly in conjunction with35718.000

132 23

125

34954.000Clamping platefor fixing cantilever arm or attachmenton upright supporting pole ø 60–89mm.Housing: stainless steel. Graphit m,powder-coated.Cantilever arm or attachment to beordered separately.Weight 0.80kgOnly in conjunction with34953.00034955.000

Erzeugt mit dem DocScape Publisher, Regelwerk $Rev$, am 2019-4-1 um 15:54

E Kona Lens wallwasherAccessories

Kona Lens wallwasher35338.000

3/5

141

138

21

35717.000SpacerStainless steel, graphite m coated.Weight 0.24kg

Erzeugt mit dem DocScape Publisher, Regelwerk $Rev$, am 2019-4-1 um 15:54

E Kona Lens wallwasherAccessories

Kona Lens wallwasher35338.000

4/5

∅ 60–89mm ∅ 60–89mm ∅ 60–89mm

34953.000 34953.00034953.000

34953.000

35718.000

34955.000

34955.000

35718.00035718.000

35718.00035718.000 35718.00035718.000

34954.000

34954.000

34955.000

34955.000

34955.000

Erzeugt mit dem DocScape Publisher, Regelwerk $Rev$, am 2019-4-1 um 15:54

E Kona Lens wallwasher

Kona Lens wallwasher35338.000

5/5