Dynasonics Why Specify. Company History Dynasonics Harry M. Pottorff 1928 1950 Founded by Harry M....
-
Upload
marcos-exton -
Category
Documents
-
view
215 -
download
0
Transcript of Dynasonics Why Specify. Company History Dynasonics Harry M. Pottorff 1928 1950 Founded by Harry M....
Dynasonics
Why Specify
Company History
Dynasonics
Harry M. Pottorff
1928 1950 Founded by Harry M. Pottorff Premier “Jobber” in Southern California
1950 1970 2nd Generation of Management Stamped Grilles & Light Duty Shutter
1970 1990 3rd Generation of Management Fire, Ceiling Radiation, Air Control, & Back-draft Dampers
1990 2010 4th Generation of Management Fort Worth Factory & Headquarters National Rep Expansion Fire/Smoke Dampers, Louvers, Architectural Products,
Acoustical Products, & 5-Year Warranty 2010 Factory Expansion, UL Lab addition
Factory Locations
*
Dynasonics
*Montebello, CAAccess DoorsAir Control DampersBack-draft DampersLouversUL Products
Fort Worth, TXCorporate HeadquartersAccess Doors, Acoustical Products, Air Control Dampers, Back-draft Dampers, Heavy Duty Dampers, Louvers, UL Products
PCI Industries - Brands
Pottorff (1928) Access Doors: Duct & Equipment Access, Fire Rated Dampers: UL Fire / Fire-Smoke / Radiation, Air Control, Back-draft Louvers: Mechanical, Operable, Penthouse, Acoustical
All-Lite (1946) Louvers: Architectural, Screens, Penthouse, Acoustical Ornamental Metals: Medallions, Canopies, Specialty Metals Sun Control: Exterior Shading, Light Shelves
Dynasonics (1969) Duct Silencers: Rectangular, Round, Elbow, External Fill Louvers: Acoustical Panel Enclosures: Fan Housing, Equipment Enclosures
Triple-V, Airfoil and True-Round FSD / SD’s
Out-of-Partition Designs
Combination Ceiling – Radiation/Fire/Smoke Damper
UL Approved Wood-Truss Ceiling Radiation Dampers 1-1/2 & 3 Hour Vertical, Horizontal, Static, Dynamic Galvanized & Stainless Steel Designs
Integral Sleeve & True-Round
Fire Dampers
UL Products
Triple-V, Airfoil and True-Round Low Leakage and Standard Models
Factory Mounted Actuators
Integral Corner Gusset & Concealed Linkage Standard
AMCA Certified Performance
Manual Balancing, Commercial and Light Industrial Designs in Aluminum, Galvanized & Stainless Steel
Air Control Dampers
Single-Sided Picture-Frame Mounting Angles
Integral Mounting Angle
UL Ceiling Radiation Damper for Wood Trusswith Side Tap Duct Connection
Factory Mounted Duct Smoke Detector
UL Approved Fire-Rated Bath Fan Systems
Out-Of-Partition Designs for Wood Stud Assemblies
Four-Way Installation - Solves the Unknown
Innovative Solutions
2”, 4”, 5”, 6” & 7” Stationary, Drainable, Operable & Combination Models in Extruded Aluminum & Steel
Certified Performance
AMCA: Air, Water & Wind-Driven RainDADE County: 201, 202 & 203
4”,6”, 8” & 12” - J-Blade or Airfoil-Blade Acoustical Louvers
In-House Fluoropolymer Paint (Newlar)
Engineered Sun-Shades & Special Shape Louvers
Louvers & Sunshades
Complete Product Line
Dynasonics
Square/Rectangular and Round Duct Silencers
Transfer Duct Silencers
Acoustical Wall Panels/Enclosures
Acoustical Louvers
Material Types
Duct Silencer - Materials
Galvanized Steel Stainless Steel Aluminum
Standard Gauges High Transmission Loss
(HTL) Casing
Fill
Glass Fiber Mineral Wood Mold Blocker - Cotton Fiber Synthetic Fiber
Protective Liner
Mylar® Tedlar® Fiberglass cloth Polyethylene bag
Outer Casing
Dynasonics
Keynote Projects
Dynasonics
Carnegie Hall
Bass Performance Hall
Bellagio Hotel & Casino – Las Vegas, NV
Getty Center Museum – Los Angeles, CA
Nike World Headquarters – Beaverton, OR
US Embassy – Cairo, Egypt
Bass Performance Hall – Fort Worth, TX
AOL/Time Warner Headquarters – New York City, NY
Big Sandy Federal Prison – Debord, KY
Exxon Corporate Headquarters – Las Colinas, TX
Pentagon Renovation – Washington, DC
David Lawrence Convention Center – Pittsburgh, PA
Carnegie Hall – New York City, NY
Radio Shack Headquarters – Fort Worth, TX
Arizona State Hospital – Tempe, AZ
Walt Disney Concert Hall – Los Angeles, CA
Leadership and Community Involvement
ASHRAE Local Membership Research Sponsor TC5.9 Committee
Dynasonics
Air Movement and Control Association Board of Directors Air Control Division - Past Committee Chair Code Action and Review - Committee Chair Damper and Louver Engineering Committee - Past Committee Chair
Codes and Standards: ICBO, BOCA, SBCCI, IBC, NFPA Active at Regional and National Level in Code Development Application and Interpretation
Underwriter Laboratories UL-555/555-S/555-C Industry Advisory Council
Delivery Schedules
Dynasonics
Industry Leading
Standard Delivery
2-3 weeks UL and Air Control Products
3-5 Weeks Standard – Mill Finish Louvers
5-7 Weeks Standard – Painted/Anodized Louvers
Guaranteed Quick Ship
24 Hour
3-Day
7-Day
Special Requests are encouraged
Elevated Temperature Airflow Lab
The new state-of-the art Pottorff Elevated Temperature Airflow Lab will allow us to streamline product development efforts, as well as enhance product offerings.
4375 cu. ft. chamber with 29 nozzles
8 setting screens
35 million BTU burner to test a standard 3’ x 4’
damper up to 500° F, 20 in of static pressure ASTM E-477
31.5 Hz to 20,000 Hz
This state-of-the-art testing lab will guarantee precision and allow Pottorff to quickly respond to new customer requirements.
Specifically designed for ASTM E-477-99 and ANSI S12.31 from 20 to 20,000Hz
Noise floor <10 dB above 400Hz
Spring isolated “floating floor” supports 567,000#
x 31,500 ft3 reverb chamber
Standard deviations:• <2 dB (25 to 80 Hz) - 0.63 dB @ 63 Hz• <0.6 dB (100 to 160 Hz) - 0.5 dB @ 125 Hz• <0.3 dB (200 to 10k Hz) - 0.04 dB @ 1,000 Hz
16” diameter rotating boom yields industries largest spatial average & is critical for accuracy below 100 Hz.
B&K Pulse System provides real time analysis & reporting through fully integrated controls package including acoustical, airflow and environmental measures.
Dynasonics
Test Lab – Acoustical Specifications
Marketing and Pricing Materials
Websites – pottorff.com and dynasonics-acoustics.com Company Information History; Capabilities; Contacts
Products E-Catalog; UL Installation Instructions; UL Specifications; UL CAD Drawings RepFinder RepConnect
• Order Status• Newsletters and Mailings• Marketing Information
SPECs – Selection Program and E-Catalog Software Next generation pricing program Fully integrated for automated order processing from order receipt through invoicing
SSQP – Silencer Selection Quick Pick Program
Thank you!