Dynapac PL1000Compact planers

Technical data

Cutting section

  Working width 1,000 mm

  Cutting depth 300 mm

  Cutting drum diameter 930 mm

  Spacing 15 mm

  Number of tools 93

Working performance

  Operating speed 0 -30 m/min

  Travel speed 0 -6 km/h

  Size, front rubber tires (mm) 650x250

  Size, rear rubber tires (mm) 650x250

Tank capacities

  Fuel tank 450 l

  Hydraulic tank 110 l

  Water tank 1,100 l

Electrical system

  Heavy-duty cold start battery 2 x 12V 170Ah

  Generator 24 V /100 A

 

Loading system

  Belt width 400 mm

  Maximum discharge height 4,600 mm

Masses

  Transport mass 12.4 t

  Operating mass (CE) 13.1 t

  Max. operating mass, fully loaded (CE) 15 t

Engine

  Manufacturer/Model Deutz TCD2012L06

  Fuel Diesel

  Number of cylinders 6

  Rated power, SAE J1995 150 kW @ 2,200 rpm

Dynapac PL1000Compact planers

Technical data

Cutting section

  Working width 1,000 mm

  Cutting depth 300 mm

  Cutting drum diameter 930 mm

  Spacing 15 mm

  Number of tools 93

Working performance

  Operating speed 0 -30 m/min

  Travel speed 0 -6 km/h

  Size, front rubber tires (mm) 650x250

  Size, rear rubber tires (mm) 650x250

Tank capacities

  Fuel tank 450 l

  Hydraulic tank 110 l

  Water tank 1,100 l

Electrical system

  Heavy-duty cold start battery 2 x 12V 170Ah

  Generator 24 V /100 A

 

Loading system

  Belt width 400 mm

  Maximum discharge height 4,600 mm

Masses

  Transport mass 12.4 t

  Operating mass (CE) 13.1 t

  Max. operating mass, fully loaded (CE) 15 t

Engine

  Manufacturer/Model Deutz TCD2012L06

  Fuel Diesel

  Number of cylinders 6

  Rated power, SAE J1995 150 kW @ 2,200 rpm

Find us locally at www.atlascopco.com

We reserve the right to change specifications without notice. Photos and illustrations do not always show standard versions of machines.The above information is a general description only, all informations are supplied without liability.

rce_pl1000_en-20140331.111820.pdf 2014-03-31 11:18

Dynapac PL1000Compact planers

Technical data

Dimensions

  A. Wheelbase 2,600 mm

  B. Front to axle 815 mm

  B1. Width, max. 2,265 mm

  B2. Width, standard 1,880 mm

  B3. Width, wheel track 1,100 mm

  C1. Conveyor angle, left 25°

  C2. Conveyor angle, right 25°

  D. Rear to axle 1,190 mm

  H1. Height, with canopy 3620 mm

  H2. Height, with folded canopy 2,820 mm

  H3. Height, w/o canopy 2,580 mm

  H4. Height, with conveyor 3600 -4600 mm

  H5. Height, with 1m conveyor 1,575 mm

  K1. Width, max. 895 mm

  K2. Width, standard 660 mm

  L1. Length 4,600 mm

  L2. Length, with folded conveyor 8,820 mm

  L3. Length, with conveyor 10,400 -11,500 mm

  L4. Length, with short conveyor 5,700 mm

  R. Milling radius, min. 230 mm

  α1. Steering angle, left 41°

  α2. Steering angle, right 72°

Optional equipment

 ■ Conveyor, 1 m rigid ■ Conveyor, 5,5 m rigid ■ Conveyor, 5,5 m foldable ■ Conveyor, 7,5 m rigid ■ Conveyor, 7,5 m foldable ■ EASY Level system ■ Slope sensor (ELS) ■ Fine milling drum (spacing 7,5 mm)

Dynapac PL1000Compact planers

Technical data

Dimensions

  A. Wheelbase 2,600 mm

  B. Front to axle 815 mm

  B1. Width, max. 2,265 mm

  B2. Width, standard 1,880 mm

  B3. Width, wheel track 1,100 mm

  C1. Conveyor angle, left 25°

  C2. Conveyor angle, right 25°

  D. Rear to axle 1,190 mm

  H1. Height, with canopy 3620 mm

  H2. Height, with folded canopy 2,820 mm

  H3. Height, w/o canopy 2,580 mm

  H4. Height, with conveyor 3600 -4600 mm

  H5. Height, with 1m conveyor 1,575 mm

  K1. Width, max. 895 mm

  K2. Width, standard 660 mm

  L1. Length 4,600 mm

  L2. Length, with folded conveyor 8,820 mm

  L3. Length, with conveyor 10,400 -11,500 mm

  L4. Length, with short conveyor 5,700 mm

  R. Milling radius, min. 230 mm

  α1. Steering angle, left 41°

  α2. Steering angle, right 72°

Optional equipment

 ■ Conveyor, 1 m rigid ■ Conveyor, 5,5 m rigid ■ Conveyor, 5,5 m foldable ■ Conveyor, 7,5 m rigid ■ Conveyor, 7,5 m foldable ■ EASY Level system ■ Slope sensor (ELS) ■ Fine milling drum (spacing 7,5 mm)

Find us locally at www.atlascopco.com

We reserve the right to change specifications without notice. Photos and illustrations do not always show standard versions of machines.The above information is a general description only, all informations are supplied without liability.

rce_pl1000_en-20140331.111820.pdf 2014-03-31 11:18

Dynapac PL2000High capacity planers

Technical data

Cutting section

  Working width 2,010 mm

  Cutting depth 320 mm

  Cutting drum diameter 1,100 mm

  Spacing 15 mm

  Number of tools 162

Working performance

  Operating speed 0-40 m/min

  Travel speed 0-5 km/h

  Theoretical turning radius 2,125 mm

  4 heavy-duty tracks 1890x306x685 mm

Tank capacities

  Fuel tank 1,100 l

  Hydraulic tank 270 l

  Water tank 3,700 l

 

Loading system

  Belt width (collecting conveyor) 850 mm

  Belt width (discharge conveyor) 800 mm

  Theoretical swept volume 470 m3/h

Masses

  Transport mass 28.2 t

  Operating mass (CE) 30.7 t

  Max. operating mass, fully loaded (CE) 33.4 t

Engine

  Manufacturer/Model Cummins QSX 15

  Fuel Diesel

  Cooling Water

  Number of cylinders 6

  Rated power, SAE J1995 447 kW (600 hp ) @ 2,100 rpm

Dynapac PL2000High capacity planers

Technical data

Cutting section

  Working width 2,010 mm

  Cutting depth 320 mm

  Cutting drum diameter 1,100 mm

  Spacing 15 mm

  Number of tools 162

Working performance

  Operating speed 0-40 m/min

  Travel speed 0-5 km/h

  Theoretical turning radius 2,125 mm

  4 heavy-duty tracks 1890x306x685 mm

Tank capacities

  Fuel tank 1,100 l

  Hydraulic tank 270 l

  Water tank 3,700 l

 

Loading system

  Belt width (collecting conveyor) 850 mm

  Belt width (discharge conveyor) 800 mm

  Theoretical swept volume 470 m3/h

Masses

  Transport mass 28.2 t

  Operating mass (CE) 30.7 t

  Max. operating mass, fully loaded (CE) 33.4 t

Engine

  Manufacturer/Model Cummins QSX 15

  Fuel Diesel

  Cooling Water

  Number of cylinders 6

  Rated power, SAE J1995 447 kW (600 hp ) @ 2,100 rpm

Find us locally at www.atlascopco.com

We reserve the right to change specifications without notice. Photos and illustrations do not always show standard versions of machines.The above information is a general description only, all informations are supplied without liability.

rce_pl2000_en-20150804.174318.pdf 2015-08-04 17:43

Dynapac PL2000High capacity planers

Technical data

Dynapac PL2000High capacity planers

Technical data

Find us locally at www.atlascopco.com

We reserve the right to change specifications without notice. Photos and illustrations do not always show standard versions of machines.The above information is a general description only, all informations are supplied without liability.

rce_pl2000_en-20150804.174318.pdf 2015-08-04 17:43

Dynapac PL350Compact planers

Technical data

Cutting section

  Working width 350 mm

  Cutting depth 100 mm

  Cutting drum diameter 520 mm

  Spacing 12 mm

  Number of tools 38

Working performance

  Operating speed 0-25 m/min

  Travel speed 0-5.8 km/h

Tank capacities

  Fuel tank 125 l

  Hydraulic tank 110 l

  Water tank 400 l

Electrical system

  Heavy-duty cold start battery 2 x 12V

  Generator 12 V /35 A

 

Loading system

  Belt width 250 mm

  Maximum discharge height 750 mm

Masses

  Transport mass 3.4 t

  Operating mass (CE) 3.7 t

  Ballast mass 1.1 t

  Conveyor with scraper (standard) 0.1 t

  Max. operating mass (incl. ballast) 4.6 t

  Max. operating mass, fully loaded (CE) 4.9 t

Engine

  Manufacturer/Model Cummins B 3.3

  Fuel Diesel

  Cooling Water

  Number of cylinders 4

  Rated power, SAE J1995 45 kW @ 2,200 rpm

Dynapac PL350Compact planers

Technical data

Cutting section

  Working width 350 mm

  Cutting depth 100 mm

  Cutting drum diameter 520 mm

  Spacing 12 mm

  Number of tools 38

Working performance

  Operating speed 0-25 m/min

  Travel speed 0-5.8 km/h

Tank capacities

  Fuel tank 125 l

  Hydraulic tank 110 l

  Water tank 400 l

Electrical system

  Heavy-duty cold start battery 2 x 12V

  Generator 12 V /35 A

 

Loading system

  Belt width 250 mm

  Maximum discharge height 750 mm

Masses

  Transport mass 3.4 t

  Operating mass (CE) 3.7 t

  Ballast mass 1.1 t

  Conveyor with scraper (standard) 0.1 t

  Max. operating mass (incl. ballast) 4.6 t

  Max. operating mass, fully loaded (CE) 4.9 t

Engine

  Manufacturer/Model Cummins B 3.3

  Fuel Diesel

  Cooling Water

  Number of cylinders 4

  Rated power, SAE J1995 45 kW @ 2,200 rpm

Find us locally at www.atlascopco.com

We reserve the right to change specifications without notice. Photos and illustrations do not always show standard versions of machines.The above information is a general description only, all informations are supplied without liability.

rce_pl350_en-20141210.084418.pdf 2014-12-10 08:44

Dynapac PL350Compact planers

Technical data

Dimensions

  A. Wheelbase 1,570 mm

  B. Front to axle 620 mm

  B1. Width, max. 1,310 mm

  B2. Width, standard 1,010 mm

  B3. Width, wheel track 1,030 mm

  B4. Width 740 mm

  B5. Width 290 mm

  B6. Width 410 mm

  C1. Conveyor angle, left 10°

  C2. Conveyor angle, right 10°

  D. Rear to axle 300 mm

  H1. Height, max. 2,010 mm

  H2. Height, max. 750 mm

  H3. Height 685 mm

  K. Ground clearance 305 mm

  L1. Length 2,955 mm

  L2. Length, with folded conveyor 3,065 mm

  L3. Length, with conveyor 3,800 mm

  R. Milling radius, min. 100 mm

  V. 26°

  α1. Steering angle, left 75°

  α2. Steering angle, right 75°

Optional equipment

 ■ Fine milling drum (spacing 6 mm)

Dynapac PL350Compact planers

Technical data

Dimensions

  A. Wheelbase 1,570 mm

  B. Front to axle 620 mm

  B1. Width, max. 1,310 mm

  B2. Width, standard 1,010 mm

  B3. Width, wheel track 1,030 mm

  B4. Width 740 mm

  B5. Width 290 mm

  B6. Width 410 mm

  C1. Conveyor angle, left 10°

  C2. Conveyor angle, right 10°

  D. Rear to axle 300 mm

  H1. Height, max. 2,010 mm

  H2. Height, max. 750 mm

  H3. Height 685 mm

  K. Ground clearance 305 mm

  L1. Length 2,955 mm

  L2. Length, with folded conveyor 3,065 mm

  L3. Length, with conveyor 3,800 mm

  R. Milling radius, min. 100 mm

  V. 26°

  α1. Steering angle, left 75°

  α2. Steering angle, right 75°

Optional equipment

 ■ Fine milling drum (spacing 6 mm)

Find us locally at www.atlascopco.com

We reserve the right to change specifications without notice. Photos and illustrations do not always show standard versions of machines.The above information is a general description only, all informations are supplied without liability.

rce_pl350_en-20141210.084418.pdf 2014-12-10 08:44

Dynapac PL500Compact planers

Technical data

Cutting section

  Working width 500 mm

  Cutting depth 200 mm

  Cutting drum diameter 700 mm

  Spacing 15 mm

  Number of tools 61

Working performance

  Operating speed 0-24

  Travel speed 0-5.3

  Size, front rubber tires (mm) 560x250

  Size, rear rubber tires (mm) 560x250

Tank capacities

  Fuel tank 250 l

  Hydraulic tank 140 l

  Water tank 500 l

Electrical system

  Heavy-duty cold start battery 2x 12V, 74Ah

  Generator 24V /70A

 

Loading system

  Belt width 400 mm

  Maximum discharge height 3,850 mm

Masses

  Transport mass 7.20 t

  Operating mass (CE) 7.50 t

  Max. operating mass, fully loaded (CE) 7.80 t

Engine

  Manufacturer/Model Cummins QSB4.5-C130

  Fuel Diesel

  Cooling Water

  Rated power, SAE J1995 97 kW @ 2,200 rpm

Dynapac PL500Compact planers

Technical data

Cutting section

  Working width 500 mm

  Cutting depth 200 mm

  Cutting drum diameter 700 mm

  Spacing 15 mm

  Number of tools 61

Working performance

  Operating speed 0-24

  Travel speed 0-5.3

  Size, front rubber tires (mm) 560x250

  Size, rear rubber tires (mm) 560x250

Tank capacities

  Fuel tank 250 l

  Hydraulic tank 140 l

  Water tank 500 l

Electrical system

  Heavy-duty cold start battery 2x 12V, 74Ah

  Generator 24V /70A

 

Loading system

  Belt width 400 mm

  Maximum discharge height 3,850 mm

Masses

  Transport mass 7.20 t

  Operating mass (CE) 7.50 t

  Max. operating mass, fully loaded (CE) 7.80 t

Engine

  Manufacturer/Model Cummins QSB4.5-C130

  Fuel Diesel

  Cooling Water

  Rated power, SAE J1995 97 kW @ 2,200 rpm

Find us locally at www.atlascopco.com

We reserve the right to change specifications without notice. Photos and illustrations do not always show standard versions of machines.The above information is a general description only, all informations are supplied without liability.

rce_pl500_en-20140114.090558.pdf 2014-01-14 09:05

Dynapac PL500Compact planers

Technical data

Dimensions Table

  A1 4,888 -5,077 mm

  A2 8,200 -9,300 mm

  B 3,730 mm

  C 1,970 mm

  D 1,000 mm

  E 740 mm

  F 2,350 mm

  G 2,500 mm

  H 3,400 mm

  I1 1,140 mm

  I2 1,500 -4,220 mm

  J 1,650 mm

  K 1,200 mm

  L 860 mm

  M1 68° /73° /70°

  M2 29° /50° /50°

  N 850 mm

  O 1,250 mm

  P 780 mm

  S1 25°

  S2 20°

  T 955 mm

  U 388 mm

  V 30°

Dynapac PL500Compact planers

Technical data

Dimensions Table

  A1 4,888 -5,077 mm

  A2 8,200 -9,300 mm

  B 3,730 mm

  C 1,970 mm

  D 1,000 mm

  E 740 mm

  F 2,350 mm

  G 2,500 mm

  H 3,400 mm

  I1 1,140 mm

  I2 1,500 -4,220 mm

  J 1,650 mm

  K 1,200 mm

  L 860 mm

  M1 68° /73° /70°

  M2 29° /50° /50°

  N 850 mm

  O 1,250 mm

  P 780 mm

  S1 25°

  S2 20°

  T 955 mm

  U 388 mm

  V 30°

Find us locally at www.atlascopco.com

We reserve the right to change specifications without notice. Photos and illustrations do not always show standard versions of machines.The above information is a general description only, all informations are supplied without liability.

rce_pl500_en-20140114.090558.pdf 2014-01-14 09:06

Criar documento PDF

Solicitar informação

Centro de Suporte a Clientes -Construção e MinasEnviar uma mensagem de correioelectrónico

Informações sobre oproduto

Unidades: Métrico Imperial

Dynapac PL2000S: Fresadora de elevada capacidade com uma largura de fresagem de2000 mm

A Dynapac PL2000S é uma fresadora a frio compacta, poderosa, de accionamento hidráulico, elevada capacidade e com direcção a quatro rastos, sistema decarregamento dianteiro e tambor de corte accionado mecanicamente por correias. A Dynapac PL2000LS foi desenvolvida para a remoção e perfilamentocompletos de pavimentos de asfalto e betão em locais de trabalho de grande dimensão.

Características e vantagens

Dados técnicos

Especificações técnicas

Tipo de modelo High capacity

Accionamento do motor Belt driven drum

Massa de transporte 31000 kg

Massa operacional 33500 kg

Largura de corte máx. 2010 mm

Profundidade de corte máx. 320 mm

Velocidade de funcionamento máx. 0 - 40 m

Velocidade de transporte máx. 0 - 5 km/h

Número de bits 162

Motor

Marca/modelo do motor Cummins QSX 15

Potência nominal 447 kW (600 hp) at 2100 rpm

Sistema hidráulico

Fresagem Belt driven

Direcção Hydrostatic

Travão de serviço Hydrostatic in forward and reverse lever

Travão de estacionamento/emergência Failsafe multidisc brake in planetary gears

Portugal atlascopco.com

LIGAÇÕES RÁPIDAS

Loja de publicações Atlas Copco

Galeria de fotos Atlas Copco

Compacta

Boa capacidade de manobra

Raio de viragem reduzido

Potente

Função de activação e desactivação automática, sistema de água

Função de activação e desactivação automática, sistema de transporte

Níveis de ruído e consumo de combustível reduzidos

Capacidades

Capacidade do depósito de combustível 1100 l

Depósito hidráulico 300 l

Capacidade do depósito de água 3700 l

Criar documento PDF

Solicitar informação

Centro de Suporte a Clientes -Construção e MinasEnviar uma mensagem de correioelectrónico

Informações sobre oproduto

Unidades: Métrico Imperial

Dynapac PL2100S: Fresadora de elevada capacidade com uma largura de fresagem de2100 mm

A Dynapac PL2100S é uma fresadora a frio compacta, poderosa, de accionamento hidráulico, elevada capacidade e com direcção a quatro rastos, sistema decarregamento dianteiro e tambor de corte accionado mecanicamente por correias. A Dynapac PL2100S foi desenvolvida para a remoção e perfilamentocompletos de pavimentos de asfalto e betão em locais de trabalho de grande dimensão.

Características e vantagens

Dados técnicos

Especificações técnicas

Tipo de modelo High capacity

Accionamento do motor Belt driven drum

Massa de transporte 31400 kg

Massa operacional 33900 kg

Largura de corte máx. 2100 mm

Profundidade de corte máx. 320 mm

Velocidade de funcionamento máx. 0 - 40 m

Velocidade de transporte máx. 0 - 5 km/h

Número de bits 176

Motor

Marca/modelo do motor Cummins QSX 15

Potência nominal 447 kW (600 hp) at 2100 rpm

Sistema hidráulico

Fresagem Belt driven

Direcção Hydrostatic

Travão de serviço Hydrostatic in forward and reverse lever

Travão de estacionamento/emergência Failsafe multidisc brake in planetary gears

Portugal atlascopco.com

LIGAÇÕES RÁPIDAS

Loja de publicações Atlas Copco

Galeria de fotos Atlas Copco

Compacta

Boa capacidade de manobra

Raio de viragem reduzido

Potente

Função de activação e desactivação automática, sistema de água

Função de activação e desactivação automática, sistema de transporte

Níveis de ruído e consumo de combustível reduzidos

Capacidades

Capacidade do depósito de combustível 1100 l

Depósito hidráulico 300 l

Capacidade do depósito de água 3700 l