Dynapac PL2000S: Fresadora de elevada capacidade com …...Dynapac PL2100S: Fresadora de elevada...

12
Dynapac PL1000 Compact planers Dynapac PL1000 Compact planers Technical data Cutting section Working width 1,000 mm Cutting depth 300 mm Cutting drum diameter 930 mm Spacing 15 mm Number of tools 93 Working performance Operating speed 0 -30 m/min Travel speed 0 -6 km/h Size, front rubber tires (mm) 650x250 Size, rear rubber tires (mm) 650x250 Tank capacities Fuel tank 450 l Hydraulic tank 110 l Water tank 1,100 l Electrical system Heavy-duty cold start battery 2 x 12V 170Ah Generator 24 V /100 A Loading system Belt width 400 mm Maximum discharge height 4,600 mm Masses Transport mass 12.4 t Operating mass (CE) 13.1 t Max. operating mass, fully loaded (CE) 15 t Engine Manufacturer/Model Deutz TCD2012L06 Fuel Diesel Number of cylinders 6 Rated power, SAE J1995 150 kW @ 2,200 rpm Find us locally at www.atlascopco.com We reserve the right to change specifications without notice. Photos and illustrations do not always show standard versions of machines. The above information is a general description only, all informations are supplied without liability. rce_pl1000_en-20140331.111820.pdf 2014-03-31 11:18

Transcript of Dynapac PL2000S: Fresadora de elevada capacidade com …...Dynapac PL2100S: Fresadora de elevada...

  • Dynapac PL1000Compact planers

    Technical data

    Cutting section

    Working width 1,000 mm

    Cutting depth 300 mm

    Cutting drum diameter 930 mm

    Spacing 15 mm

    Number of tools 93

    Working performance

    Operating speed 0 -30 m/min

    Travel speed 0 -6 km/h

    Size, front rubber tires (mm) 650x250

    Size, rear rubber tires (mm) 650x250

    Tank capacities

    Fuel tank 450 l

    Hydraulic tank 110 l

    Water tank 1,100 l

    Electrical system

    Heavy-duty cold start battery 2 x 12V 170Ah

    Generator 24 V /100 A

    Loading system

    Belt width 400 mm

    Maximum discharge height 4,600 mm

    Masses

    Transport mass 12.4 t

    Operating mass (CE) 13.1 t

    Max. operating mass, fully loaded (CE) 15 t

    Engine

    Manufacturer/Model Deutz TCD2012L06

    Fuel Diesel

    Number of cylinders 6

    Rated power, SAE J1995 150 kW @ 2,200 rpm

    Dynapac PL1000Compact planers

    Technical data

    Cutting section

    Working width 1,000 mm

    Cutting depth 300 mm

    Cutting drum diameter 930 mm

    Spacing 15 mm

    Number of tools 93

    Working performance

    Operating speed 0 -30 m/min

    Travel speed 0 -6 km/h

    Size, front rubber tires (mm) 650x250

    Size, rear rubber tires (mm) 650x250

    Tank capacities

    Fuel tank 450 l

    Hydraulic tank 110 l

    Water tank 1,100 l

    Electrical system

    Heavy-duty cold start battery 2 x 12V 170Ah

    Generator 24 V /100 A

    Loading system

    Belt width 400 mm

    Maximum discharge height 4,600 mm

    Masses

    Transport mass 12.4 t

    Operating mass (CE) 13.1 t

    Max. operating mass, fully loaded (CE) 15 t

    Engine

    Manufacturer/Model Deutz TCD2012L06

    Fuel Diesel

    Number of cylinders 6

    Rated power, SAE J1995 150 kW @ 2,200 rpm

    Find us locally at www.atlascopco.com

    We reserve the right to change specifications without notice. Photos and illustrations do not always show standard versions of machines.The above information is a general description only, all informations are supplied without liability.

    rce_pl1000_en-20140331.111820.pdf 2014-03-31 11:18

    http://www.atlascopco.com/us/Contactus/

  • Dynapac PL1000Compact planers

    Technical data

    Dimensions

    A. Wheelbase 2,600 mm

    B. Front to axle 815 mm

    B1. Width, max. 2,265 mm

    B2. Width, standard 1,880 mm

    B3. Width, wheel track 1,100 mm

    C1. Conveyor angle, left 25°

    C2. Conveyor angle, right 25°

    D. Rear to axle 1,190 mm

    H1. Height, with canopy 3620 mm

    H2. Height, with folded canopy 2,820 mm

    H3. Height, w/o canopy 2,580 mm

    H4. Height, with conveyor 3600 -4600 mm

    H5. Height, with 1m conveyor 1,575 mm

    K1. Width, max. 895 mm

    K2. Width, standard 660 mm

    L1. Length 4,600 mm

    L2. Length, with folded conveyor 8,820 mm

    L3. Length, with conveyor 10,400 -11,500 mm

    L4. Length, with short conveyor 5,700 mm

    R. Milling radius, min. 230 mm

    α1. Steering angle, left 41°

    α2. Steering angle, right 72°

    Optional equipment

    ■ Conveyor, 1 m rigid ■ Conveyor, 5,5 m rigid ■ Conveyor, 5,5 m foldable ■ Conveyor, 7,5 m rigid ■ Conveyor, 7,5 m foldable ■ EASY Level system ■ Slope sensor (ELS) ■ Fine milling drum (spacing 7,5 mm)

    Dynapac PL1000Compact planers

    Technical data

    Dimensions

    A. Wheelbase 2,600 mm

    B. Front to axle 815 mm

    B1. Width, max. 2,265 mm

    B2. Width, standard 1,880 mm

    B3. Width, wheel track 1,100 mm

    C1. Conveyor angle, left 25°

    C2. Conveyor angle, right 25°

    D. Rear to axle 1,190 mm

    H1. Height, with canopy 3620 mm

    H2. Height, with folded canopy 2,820 mm

    H3. Height, w/o canopy 2,580 mm

    H4. Height, with conveyor 3600 -4600 mm

    H5. Height, with 1m conveyor 1,575 mm

    K1. Width, max. 895 mm

    K2. Width, standard 660 mm

    L1. Length 4,600 mm

    L2. Length, with folded conveyor 8,820 mm

    L3. Length, with conveyor 10,400 -11,500 mm

    L4. Length, with short conveyor 5,700 mm

    R. Milling radius, min. 230 mm

    α1. Steering angle, left 41°

    α2. Steering angle, right 72°

    Optional equipment

    ■ Conveyor, 1 m rigid ■ Conveyor, 5,5 m rigid ■ Conveyor, 5,5 m foldable ■ Conveyor, 7,5 m rigid ■ Conveyor, 7,5 m foldable ■ EASY Level system ■ Slope sensor (ELS) ■ Fine milling drum (spacing 7,5 mm)

    Find us locally at www.atlascopco.com

    We reserve the right to change specifications without notice. Photos and illustrations do not always show standard versions of machines.The above information is a general description only, all informations are supplied without liability.

    rce_pl1000_en-20140331.111820.pdf 2014-03-31 11:18

    http://www.atlascopco.com/us/Contactus/

  • Dynapac PL2000High capacity planers

    Technical data

    Cutting section

    Working width 2,010 mm

    Cutting depth 320 mm

    Cutting drum diameter 1,100 mm

    Spacing 15 mm

    Number of tools 162

    Working performance

    Operating speed 0-40 m/min

    Travel speed 0-5 km/h

    Theoretical turning radius 2,125 mm

    4 heavy-duty tracks 1890x306x685 mm

    Tank capacities

    Fuel tank 1,100 l

    Hydraulic tank 270 l

    Water tank 3,700 l

    Loading system

    Belt width (collecting conveyor) 850 mm

    Belt width (discharge conveyor) 800 mm

    Theoretical swept volume 470 m3/h

    Masses

    Transport mass 28.2 t

    Operating mass (CE) 30.7 t

    Max. operating mass, fully loaded (CE) 33.4 t

    Engine

    Manufacturer/Model Cummins QSX 15

    Fuel Diesel

    Cooling Water

    Number of cylinders 6

    Rated power, SAE J1995 447 kW (600 hp ) @ 2,100 rpm

    Dynapac PL2000High capacity planers

    Technical data

    Cutting section

    Working width 2,010 mm

    Cutting depth 320 mm

    Cutting drum diameter 1,100 mm

    Spacing 15 mm

    Number of tools 162

    Working performance

    Operating speed 0-40 m/min

    Travel speed 0-5 km/h

    Theoretical turning radius 2,125 mm

    4 heavy-duty tracks 1890x306x685 mm

    Tank capacities

    Fuel tank 1,100 l

    Hydraulic tank 270 l

    Water tank 3,700 l

    Loading system

    Belt width (collecting conveyor) 850 mm

    Belt width (discharge conveyor) 800 mm

    Theoretical swept volume 470 m3/h

    Masses

    Transport mass 28.2 t

    Operating mass (CE) 30.7 t

    Max. operating mass, fully loaded (CE) 33.4 t

    Engine

    Manufacturer/Model Cummins QSX 15

    Fuel Diesel

    Cooling Water

    Number of cylinders 6

    Rated power, SAE J1995 447 kW (600 hp ) @ 2,100 rpm

    Find us locally at www.atlascopco.com

    We reserve the right to change specifications without notice. Photos and illustrations do not always show standard versions of machines.The above information is a general description only, all informations are supplied without liability.

    rce_pl2000_en-20150804.174318.pdf 2015-08-04 17:43

    http://www.atlascopco.com/us/Contactus/

  • Dynapac PL2000High capacity planers

    Technical data

    Dynapac PL2000High capacity planers

    Technical data

    Find us locally at www.atlascopco.com

    We reserve the right to change specifications without notice. Photos and illustrations do not always show standard versions of machines.The above information is a general description only, all informations are supplied without liability.

    rce_pl2000_en-20150804.174318.pdf 2015-08-04 17:43

    http://www.atlascopco.com/us/Contactus/

  • Dynapac PL350Compact planers

    Technical data

    Cutting section

    Working width 350 mm

    Cutting depth 100 mm

    Cutting drum diameter 520 mm

    Spacing 12 mm

    Number of tools 38

    Working performance

    Operating speed 0-25 m/min

    Travel speed 0-5.8 km/h

    Tank capacities

    Fuel tank 125 l

    Hydraulic tank 110 l

    Water tank 400 l

    Electrical system

    Heavy-duty cold start battery 2 x 12V

    Generator 12 V /35 A

    Loading system

    Belt width 250 mm

    Maximum discharge height 750 mm

    Masses

    Transport mass 3.4 t

    Operating mass (CE) 3.7 t

    Ballast mass 1.1 t

    Conveyor with scraper (standard) 0.1 t

    Max. operating mass (incl. ballast) 4.6 t

    Max. operating mass, fully loaded (CE) 4.9 t

    Engine

    Manufacturer/Model Cummins B 3.3

    Fuel Diesel

    Cooling Water

    Number of cylinders 4

    Rated power, SAE J1995 45 kW @ 2,200 rpm

    Dynapac PL350Compact planers

    Technical data

    Cutting section

    Working width 350 mm

    Cutting depth 100 mm

    Cutting drum diameter 520 mm

    Spacing 12 mm

    Number of tools 38

    Working performance

    Operating speed 0-25 m/min

    Travel speed 0-5.8 km/h

    Tank capacities

    Fuel tank 125 l

    Hydraulic tank 110 l

    Water tank 400 l

    Electrical system

    Heavy-duty cold start battery 2 x 12V

    Generator 12 V /35 A

    Loading system

    Belt width 250 mm

    Maximum discharge height 750 mm

    Masses

    Transport mass 3.4 t

    Operating mass (CE) 3.7 t

    Ballast mass 1.1 t

    Conveyor with scraper (standard) 0.1 t

    Max. operating mass (incl. ballast) 4.6 t

    Max. operating mass, fully loaded (CE) 4.9 t

    Engine

    Manufacturer/Model Cummins B 3.3

    Fuel Diesel

    Cooling Water

    Number of cylinders 4

    Rated power, SAE J1995 45 kW @ 2,200 rpm

    Find us locally at www.atlascopco.com

    We reserve the right to change specifications without notice. Photos and illustrations do not always show standard versions of machines.The above information is a general description only, all informations are supplied without liability.

    rce_pl350_en-20141210.084418.pdf 2014-12-10 08:44

    http://www.atlascopco.com/us/Contactus/

  • Dynapac PL350Compact planers

    Technical data

    Dimensions

    A. Wheelbase 1,570 mm

    B. Front to axle 620 mm

    B1. Width, max. 1,310 mm

    B2. Width, standard 1,010 mm

    B3. Width, wheel track 1,030 mm

    B4. Width 740 mm

    B5. Width 290 mm

    B6. Width 410 mm

    C1. Conveyor angle, left 10°

    C2. Conveyor angle, right 10°

    D. Rear to axle 300 mm

    H1. Height, max. 2,010 mm

    H2. Height, max. 750 mm

    H3. Height 685 mm

    K. Ground clearance 305 mm

    L1. Length 2,955 mm

    L2. Length, with folded conveyor 3,065 mm

    L3. Length, with conveyor 3,800 mm

    R. Milling radius, min. 100 mm

    V. 26°

    α1. Steering angle, left 75°

    α2. Steering angle, right 75°

    Optional equipment

    ■ Fine milling drum (spacing 6 mm)

    Dynapac PL350Compact planers

    Technical data

    Dimensions

    A. Wheelbase 1,570 mm

    B. Front to axle 620 mm

    B1. Width, max. 1,310 mm

    B2. Width, standard 1,010 mm

    B3. Width, wheel track 1,030 mm

    B4. Width 740 mm

    B5. Width 290 mm

    B6. Width 410 mm

    C1. Conveyor angle, left 10°

    C2. Conveyor angle, right 10°

    D. Rear to axle 300 mm

    H1. Height, max. 2,010 mm

    H2. Height, max. 750 mm

    H3. Height 685 mm

    K. Ground clearance 305 mm

    L1. Length 2,955 mm

    L2. Length, with folded conveyor 3,065 mm

    L3. Length, with conveyor 3,800 mm

    R. Milling radius, min. 100 mm

    V. 26°

    α1. Steering angle, left 75°

    α2. Steering angle, right 75°

    Optional equipment

    ■ Fine milling drum (spacing 6 mm)

    Find us locally at www.atlascopco.com

    We reserve the right to change specifications without notice. Photos and illustrations do not always show standard versions of machines.The above information is a general description only, all informations are supplied without liability.

    rce_pl350_en-20141210.084418.pdf 2014-12-10 08:44

    http://www.atlascopco.com/us/Contactus/

  • Dynapac PL500Compact planers

    Technical data

    Cutting section

    Working width 500 mm

    Cutting depth 200 mm

    Cutting drum diameter 700 mm

    Spacing 15 mm

    Number of tools 61

    Working performance

    Operating speed 0-24

    Travel speed 0-5.3

    Size, front rubber tires (mm) 560x250

    Size, rear rubber tires (mm) 560x250

    Tank capacities

    Fuel tank 250 l

    Hydraulic tank 140 l

    Water tank 500 l

    Electrical system

    Heavy-duty cold start battery 2x 12V, 74Ah

    Generator 24V /70A

    Loading system

    Belt width 400 mm

    Maximum discharge height 3,850 mm

    Masses

    Transport mass 7.20 t

    Operating mass (CE) 7.50 t

    Max. operating mass, fully loaded (CE) 7.80 t

    Engine

    Manufacturer/Model Cummins QSB4.5-C130

    Fuel Diesel

    Cooling Water

    Rated power, SAE J1995 97 kW @ 2,200 rpm

    Dynapac PL500Compact planers

    Technical data

    Cutting section

    Working width 500 mm

    Cutting depth 200 mm

    Cutting drum diameter 700 mm

    Spacing 15 mm

    Number of tools 61

    Working performance

    Operating speed 0-24

    Travel speed 0-5.3

    Size, front rubber tires (mm) 560x250

    Size, rear rubber tires (mm) 560x250

    Tank capacities

    Fuel tank 250 l

    Hydraulic tank 140 l

    Water tank 500 l

    Electrical system

    Heavy-duty cold start battery 2x 12V, 74Ah

    Generator 24V /70A

    Loading system

    Belt width 400 mm

    Maximum discharge height 3,850 mm

    Masses

    Transport mass 7.20 t

    Operating mass (CE) 7.50 t

    Max. operating mass, fully loaded (CE) 7.80 t

    Engine

    Manufacturer/Model Cummins QSB4.5-C130

    Fuel Diesel

    Cooling Water

    Rated power, SAE J1995 97 kW @ 2,200 rpm

    Find us locally at www.atlascopco.com

    We reserve the right to change specifications without notice. Photos and illustrations do not always show standard versions of machines.The above information is a general description only, all informations are supplied without liability.

    rce_pl500_en-20140114.090558.pdf 2014-01-14 09:05

    http://www.atlascopco.com/us/Contactus/

  • Dynapac PL500Compact planers

    Technical data

    Dimensions Table

    A1 4,888 -5,077 mm

    A2 8,200 -9,300 mm

    B 3,730 mm

    C 1,970 mm

    D 1,000 mm

    E 740 mm

    F 2,350 mm

    G 2,500 mm

    H 3,400 mm

    I1 1,140 mm

    I2 1,500 -4,220 mm

    J 1,650 mm

    K 1,200 mm

    L 860 mm

    M1 68° /73° /70°

    M2 29° /50° /50°

    N 850 mm

    O 1,250 mm

    P 780 mm

    S1 25°

    S2 20°

    T 955 mm

    U 388 mm

    V 30°

    Dynapac PL500Compact planers

    Technical data

    Dimensions Table

    A1 4,888 -5,077 mm

    A2 8,200 -9,300 mm

    B 3,730 mm

    C 1,970 mm

    D 1,000 mm

    E 740 mm

    F 2,350 mm

    G 2,500 mm

    H 3,400 mm

    I1 1,140 mm

    I2 1,500 -4,220 mm

    J 1,650 mm

    K 1,200 mm

    L 860 mm

    M1 68° /73° /70°

    M2 29° /50° /50°

    N 850 mm

    O 1,250 mm

    P 780 mm

    S1 25°

    S2 20°

    T 955 mm

    U 388 mm

    V 30°

    Find us locally at www.atlascopco.com

    We reserve the right to change specifications without notice. Photos and illustrations do not always show standard versions of machines.The above information is a general description only, all informations are supplied without liability.

    rce_pl500_en-20140114.090558.pdf 2014-01-14 09:06

    http://www.atlascopco.com/us/Contactus/

  • Criar documento PDF

    Solicitar informação

    Centro de Suporte a Clientes -Construção e MinasEnviar uma mensagem de correioelectrónico

    Informações sobre oproduto

    Unidades: Métrico Imperial

    Dynapac PL2000S: Fresadora de elevada capacidade com uma largura de fresagem de2000 mm

    A Dynapac PL2000S é uma fresadora a frio compacta, poderosa, de accionamento hidráulico, elevada capacidade e com direcção a quatro rastos, sistema decarregamento dianteiro e tambor de corte accionado mecanicamente por correias. A Dynapac PL2000LS foi desenvolvida para a remoção e perfilamentocompletos de pavimentos de asfalto e betão em locais de trabalho de grande dimensão.

    Características e vantagens

    Dados técnicos

    Especificações técnicas

    Tipo de modelo High capacity

    Accionamento do motor Belt driven drum

    Massa de transporte 31000 kg

    Massa operacional 33500 kg

    Largura de corte máx. 2010 mm

    Profundidade de corte máx. 320 mm

    Velocidade de funcionamento máx. 0 - 40 m

    Velocidade de transporte máx. 0 - 5 km/h

    Número de bits 162

    Motor

    Marca/modelo do motor Cummins QSX 15

    Potência nominal 447 kW (600 hp) at 2100 rpm

    Sistema hidráulico

    Fresagem Belt driven

    Direcção Hydrostatic

    Travão de serviço Hydrostatic in forward and reverse lever

    Travão de estacionamento/emergência Failsafe multidisc brake in planetary gears

    Portugal atlascopco.com

    LIGAÇÕES RÁPIDAS

    Loja de publicações Atlas Copco

    Galeria de fotos Atlas Copco

    Compacta

    Boa capacidade de manobra

    Raio de viragem reduzido

    Potente

    Função de activação e desactivação automática, sistema de água

    Função de activação e desactivação automática, sistema de transporte

    Níveis de ruído e consumo de combustível reduzidos

  • Capacidades

    Capacidade do depósito de combustível 1100 l

    Depósito hidráulico 300 l

    Capacidade do depósito de água 3700 l

  • Criar documento PDF

    Solicitar informação

    Centro de Suporte a Clientes -Construção e MinasEnviar uma mensagem de correioelectrónico

    Informações sobre oproduto

    Unidades: Métrico Imperial

    Dynapac PL2100S: Fresadora de elevada capacidade com uma largura de fresagem de2100 mm

    A Dynapac PL2100S é uma fresadora a frio compacta, poderosa, de accionamento hidráulico, elevada capacidade e com direcção a quatro rastos, sistema decarregamento dianteiro e tambor de corte accionado mecanicamente por correias. A Dynapac PL2100S foi desenvolvida para a remoção e perfilamentocompletos de pavimentos de asfalto e betão em locais de trabalho de grande dimensão.

    Características e vantagens

    Dados técnicos

    Especificações técnicas

    Tipo de modelo High capacity

    Accionamento do motor Belt driven drum

    Massa de transporte 31400 kg

    Massa operacional 33900 kg

    Largura de corte máx. 2100 mm

    Profundidade de corte máx. 320 mm

    Velocidade de funcionamento máx. 0 - 40 m

    Velocidade de transporte máx. 0 - 5 km/h

    Número de bits 176

    Motor

    Marca/modelo do motor Cummins QSX 15

    Potência nominal 447 kW (600 hp) at 2100 rpm

    Sistema hidráulico

    Fresagem Belt driven

    Direcção Hydrostatic

    Travão de serviço Hydrostatic in forward and reverse lever

    Travão de estacionamento/emergência Failsafe multidisc brake in planetary gears

    Portugal atlascopco.com

    LIGAÇÕES RÁPIDAS

    Loja de publicações Atlas Copco

    Galeria de fotos Atlas Copco

    Compacta

    Boa capacidade de manobra

    Raio de viragem reduzido

    Potente

    Função de activação e desactivação automática, sistema de água

    Função de activação e desactivação automática, sistema de transporte

    Níveis de ruído e consumo de combustível reduzidos

  • Capacidades

    Capacidade do depósito de combustível 1100 l

    Depósito hidráulico 300 l

    Capacidade do depósito de água 3700 l