DYNADEX SDN BHD (838365-P)ddx-hottapping.weebly.com/uploads/2/7/2/7/2727260/ddx...(Suitable for both...
Transcript of DYNADEX SDN BHD (838365-P)ddx-hottapping.weebly.com/uploads/2/7/2/7/2727260/ddx...(Suitable for both...
DD Std Series Tapping MachineSizes: 4” through 24” Standard ModelsDD Std Series Tapping MachineSizes: 4” through 24” Standard Models
Features
The basic tapping machine includes:
Structural Casing
Tapping Housing
Drive Shaft
Hydraulic Drive Motor
Tapping Cutters
Pilot Drills
Hand Wheel
DYNADEX SDN BHD (838365-P)
Dynadex’s revolutionary and rigidlystrong-body-structured of hydraulicallydriven DDX series Tapping Machinesare Body-Stability Enhanced withSequentially-Align Cutting CarbideTeeth that make under pressuretapping so smooth, steady and fast.
DDX series of Hot Tapping machinesutilizes various sizes of pipe tappingmachines to perform our procedure ofcutting holes in operating pipelineswhile under pressure, therefore thisallowing for new branch connectionson the original piping systems.
Typical applications of a Hot Tapinclude making a branch connection,initiating a bypass and allowingperformance of a line stop.
Special applications / machines orservices are available upon request:
• Durable carbide cutter teeth to insure fast accurate cutting
• Works on any flange joint tapping valve
• Rated at PN16
• Work on steel, cast iron, ductile iron, asbestos cement, PVC or PE
Pilot Drill
Tapping Cutter
Tapping HousingHand Wheel
Drive Shaft
Hydraulic Drive Motor
Structural Casing
Dynadex Sdn Bhd (838365-P)
924, Jalan 38, Salak South New Village ,57100 Kuala Lumpur, Malaysia.Tel / Fax: +603 7982 5611Mobile : +6012 229 2109
Model Number DDX 400 Std
Size: DN 250 – DN 400 (10” – 16”)
Features:
1- Hydraulic Drive Motor
1- Drive Shaft c/w Holder for 250mm, 300mm, 350mm & 400mm cutters
4 – Carbide Toothed Tapping Cutters (250mm, 300mm, 350mm & 400mm)
4 – Tapping Housings Adaptor PN16 (250mm, 300mm, 350mm & 400mm)
4 - Pilot Drills (250mm, 300mm, 350mm & 400mm)
1- Hand Wheel included
Length Included Tapping Housing ≈ 1.6M
Model Number DDX 600 Std
Size: DN 450 – DN 600 (18” – 24”)
Features:
1- Hydraulic Drive Motor
1- Drive Shaft c/w Holder for 450mm, 500mm & 600mm cutters
3 – Carbide Toothed Tapping Cutters (450mm, 500mm & 600mm)
3 – Tapping Housings Adaptor PN16 (450mm, 500mm & 600mm)
3 - Pilot Drills (450mm, 500mm & 600mm)
1- Hand Wheel included
Length Included Tapping Housing ≈ 2.6 M, Width ≈ 1.0 M & Height ≈ 0.75 M >> i.e.
** Shorter Working Space Required! **
Model Number DDX 200 Std
Size: DN 100 – DN 200 (4” – 8”)
Features:
1- Hydraulic Drive Motor
1- Drive Shaft c/w Holder for 100mm, 150mm & 200mm cutters
3 – Carbide Toothed Tapping Cutters (100mm, 150mm & 200mm)
3 – Tapping Housings Adaptor PN16 (100mm, 150mm & 200mm)
3 - Pilot Drills (100mm, 150mm & 200mm)
1 - Hand Wheel included
Length Included Tapping Housing ≈ 1.2M
Standard Specification
Maximum Operating Pipeline Pressure
Maximum Operating Temperature
Maximum Operating Hydraulic Pressure
Minimum Size Tap
Maximum Size Tap
Tapping Positions
Operation
Coupon Retention System
Optional Hydraulic Power Pack Unit
Weight of Hydraulic power pack unit
Engine
Fuel Tank
Pump
250 psi (16 bar)
38ºC
2200 psi (138 bars)
4 inches (100mm)
60 inches (1500mm)
Vertical / Horizontal
Mechanical & Hydraulic System
Swing Hook(s)
(Suitable for both hot tapping and line stopping machine)
≤ 1000 kg
New / Used Diesel Engine.
Fuel Tank Capacity 20 -30 gallon
Standard Single Pump
Super size models available are:
28” thru 40”
44” thru 60”
Super size models available are:
28” thru 40”
44” thru 60”
DYNADEX SDN BHD (838365-P)
DDX Series
Tapping Machine
Standard Model
DDX Series
Tapping Machine
Standard Model
924, Jln 38, Salak South New Village, 57100 Kuala Lumpur, Malaysia.Tel / Fax: +603 7982 5611Mobile : +6012 229 2109 [email protected]