DWDM Mux/DeMuxes TS-Series - - CB Networks · 2011-11-28 · DWDM Mux/DeMuxes 8830/01 8831/01,...
2
Data Sheet DWDM Mux/DeMuxes 8830/01 8831/01, 8832/01 TS-Series The TS-series Transponders and Aggregators are used to generate the CWDM and DWDM wavelength channels with lowest cost and with the highest utilization of the available channel capacity. It is equally important to have a flexible solution for the addition and extraction of wavelengths to/from the fiber. The TS-platform provides a range of CWDM and DWDM Mux/DeMuxes and CWDM Add/Drop filters that can be combined to provide flexible and scalable networking solutions for point-to-point, bus and ring configurations. This 8830/01 8831/01 2610/01 is an 8ch Mux/DeMux unit covering the 8 DWDM channels 934, 935.. 941. The unit has an Express port that can be used as an upgrade port for additional 8 DWDM channels via the unit that covers the channels 925, 926... 932. This combination enables a 16 channel DWDM solution that can be used with an optical amplifier (EDFA) and Dispersion Compensation (DCU) to extend the tranmission distance. The DWDM channels are compliant with G.694.1 and use 100GHz channels spacing. The channel number is equal to the three significant digits in the channel frequency, e.g. 193,40THz corresponds to channel 934. The example below shows a combined DWDM/CWDM configuration. The 8830/01 & 8831/01 units provide 16 DWDM channels that can optionally be connected to an optical pre-amplifier ( ) and a 40km Transmode 8830/01 Mux/Demux Rx Tx Tx Rx Mon Line 934 935 936 937 938 939 940 941 OSC Express Transmode 8832/01 Mux/Demux Mon Line 954 955 956 957 958 959 960 961 Rx Tx Tx Rx Transmode 8831/01 Mux/Demux Mon Line 925 926 927 928 929 930 931 932 Rx Tx Tx Rx Exp 8ch DWDM (8830/01) 936 937 938 939 934 935 940 941 8ch DWDM (8831/01) 927 928 929 930 925 926 931 932 1510 1530 Exp 8ch DWDM (8830/01) 936 937 938 939 934 935 940 941 8ch DWDM (8831/01) 927 928 929 930 925 926 931 932 1550 1570 Pre-Amplifier 2610/01 1470 1490 1590 1610 8140/01 8131/01 1310/OSC Exp The 16 DWDM channels from the 8830/01 unit are connected to the 1550nm port of the CWDM Mux/DeMux . This gives a combination of 3x CWDM and 16x DWDM channels on the same fiber- pair. A further upgrade can be provided by adding the CWDM Mux/DeMux to the Express port giving an additional 4 CWDM channels. Fully upgraded, this configuration gives 7 CWDM channels and 16 DWDM channels on the same fiber- pair. An OSC-channel can also be added to the 8131/01 as this wavelength is added/extracted before the optical amplifier and thus avoids the blocking effect of the amplifier. 8131/01 8140/01 MultiRate Transponder 7700 TS-1100 Chassis 9013 TS-100 Chassis 9002 TS-Series is a versatile platform with modularity both in channel count and transmission reach. It is scalable up to 16 CWDM channels and 38 C/DWDM channels by adding one or several channels at a time without any service downtime or impact on existing traffic. The protocol transparent nature of TS-Series provides support for a wide range of services including Gigabit Ethernet, Fast Ethernet, SDH/SONET, Fibre Channel, FICON, ESCON, ETR etc. The protocols can be mixed between C/DWDM and even between TDM channels. 4G FC Transponder 7400
Transcript of DWDM Mux/DeMuxes TS-Series - - CB Networks · 2011-11-28 · DWDM Mux/DeMuxes 8830/01 8831/01,...
Data Sheet
DWDM Mux/DeMuxes
8830/018831/01, 8832/01
TS-Series
The TS-series Transponders and Aggregators are used to generate the CWDM and DWDM wavelength channels withlowest cost and with the highest utilization of the available channel capacity. It is equally important to have a flexiblesolution for the addition and extraction of wavelengths to/from the fiber.
The TS-platform provides a range of CWDM and DWDM Mux/DeMuxes and CWDM Add/Drop filters that can becombined to provide flexible and scalable networking solutions for point-to-point, bus and ring configurations. This
8830/01
8831/01
2610/01
is an 8ch Mux/DeMux unit covering the 8 DWDM channels934, 935.. 941.
The unit has an Express port that can be used as an upgrade port foradditional 8 DWDM channels via the unit that covers thechannels 925, 926... 932.
This combination enables a 16 channel DWDM solution that can be usedwith an optical amplifier (EDFA) and Dispersion Compensation (DCU) toextend the tranmission distance.
The DWDM channels are compliant with G.694.1 and use 100GHzchannels spacing. The channel number is equal to the three significantdigits in the channel frequency, e.g. 193,40THz corresponds to channel934.
The example below shows a combined DWDM/CWDM configuration. The8830/01 & 8831/01 units provide 16 DWDM channels that can optionallybe connected to an optical pre-amplifier ( ) and a 40km
Transmode8830/01
Mux/Demux
Rx Tx
Tx Rx
Mo
nLi
ne
934 935
936 937
938 939
940 941
OSC
Exp
ress
Transmode8832/01
Mux/Demux
Mo
nLi
ne
954 955
956 957
958 959
960 961
Rx Tx
Tx Rx
Transmode8831/01
Mux/Demux
Mo
nLi
ne
925 926
927 928
929 930
931 932
Rx Tx
Tx Rx
Exp
8c
hD
WD
M(8
83
0/0
1)
936
937
938
939
934
935
940
941
8c
hD
WD
M(8
83
1/0
1)
927
928
929
930
925
926
931
932
15101530
Exp
8c
hD
WD
M(8
83
0/0
1)
936
937
938
939
934
935
940
941
8c
hD
WD
M(8
83
1/0
1)
927
928
929
930
925
926
931
932
1550
1570
Pre-Amplifier
2610/01
1470
1490
1590
1610
81
40
/01
81
31
/01
1310/OSC
Exp
The 16 DWDM channels from the8830/01 unit are connected to the1550nm port of the CWDMMux/DeMux . This gives acombination of 3x CWDM and 16xDWDM channels on the same fiber-pair.
A further upgrade can be providedby adding the CWDMMux/DeMux to the Express portgiving an additional 4 CWDMchannels.
Fully upgraded, this configurationgives 7 CWDM channels and 16DWDM channels on the same fiber-pair.
An OSC-channel can also be addedto the 8131/01 as this wavelength isadded/extracted before the opticalamplifier and thus avoids theblocking effect of the amplifier.
8131/01
8140/01
MultiRate
Transponder
7700
TS-1100
Chassis9013
TS-100
Chassis9002
TS-Series is a
versatile platform
with modularity
both in channel
count and
transmission reach.
It is scalable up to
16 CWDM channels
and 38 C/DWDM
channels by
adding one or
several channels at
a time without any
service downtime
or impact on
existing traffic.
The protocol
transparent nature
of TS-Series provides
support for a wide
range of services
including Gigabit
Ethernet, Fast
Ethernet,
SDH/SONET, Fibre
Channel, FICON,
ESCON, ETR etc.
The protocols can
be mixed between
C/DWDM and even
between TDM
channels.
4G FC
Transponder
7400
Technical Data
[email protected]+46 (0)8 527 675 50+46 (0)8 527 675 99
web:email:
telephone:fax:
Transmode Systems ABJakobsdalsvagen 17SE-126 53 HagerstenSweden
DS-TSMDU-D
Rev D March 2008
Another powerful enhancement is tointroduce the third 8ch DWDMMux/DeMux . The DWDMchannels of this unit match the1530nm port of the 8131/1 CWDMMux/DeMux.
In total, this gives a combined24 DWDM channel and 6 CWDMchannel configuration.
The 1310nm port on the 8131/1CWDM Mux/DeMux can alternativelybe used for legacy 1310nmSDH/SONET equipment to furtherutilize the fiber-pair.
Due to the highly modular design ofthe Transmode TS-1100units a wide variety of applicationscan be addressed using thesebuilding blocks, some of which havebeen addressed in this datasheet.
Other possible applications includethe addition of 10 Gbit/s channels toexisting CWDM networks.
8832/1
Mux/DeMux
The specifications and information within this document are subject to change without further notice.All statements, information and recommendations are believed to be accurate but are presented without warranty of any kind.
81
40
/1
Module type / combination
8131/01
8830/01
8830/01 + 8831/01
8131/01 + 8140/01
8831/01
8832/01
Insertion Loss link level
(Mux & DeMux)
3.2dB
6.0dB
7.3dB
4.0dB
4.9dB
4.9dB
The 9013 chassis can house both
DWDM and CWDM units
The Mux/DeMux units can be combined with Transpondersand Aggregators and mounted in a common chassis withother plug in units. For example, a mixed DWDM/CWDMnode can be housed in the 9013 chassis and managed on
The node manager TS ENM is accessed via a CLI or Graphical User Interface (GUI) using a standard web browser. Seeseparate material for more information about Transponders, Aggregators and management solutions.
Transmode patented iWDM technology entails “Protocol
Recognition” and “Speed Watch” that introduces true
Plug-and-Play simplicity to wdm networking
by allowing the Transponders to recognize the attached
signal and auto-provision the optimum parameters.
Speed Watch allows the operator to restrict the traffic flow
based on a maximum allowable bit rate
and/or protocol type.
8c
hD
WD
M(8
83
2/1
)
956
957
958
959
954
955
960
9611510
Exp
8c
hD
WD
M(8
83
0/1
)
936
937
938
939
934
935
940
941
8c
hD
WD
M(8
83
1/1
)
927
928
929
930
925
926
931
932
1550
1570
1470
1490
1590
1610
81
40
/1
81
31
/1
1310/OSC
Exp
1530
Muxponder
5400/03
10G Transponder
7900
Mux/DeMux
&
AD-filters
The TS-Series
Transponders
provide a
completely
integrated solution
to convert client
signals to run over
C/DWDM
channels. There
are several
modules available
covering a wide
range of protocols
from 100Mb/s to
10Gb/s. The
TS-Series
Transponders are
bit rate
transparent
requiring no pre-
configuration or
on-site
provisioning.
