DVS 4 / DVS 4t · DVS 4 / DVS 4t Tannoy adopts a policy of continuous improvement and product...
Transcript of DVS 4 / DVS 4t · DVS 4 / DVS 4t Tannoy adopts a policy of continuous improvement and product...
DVS 4 / DVS 4t
DVS 4 / DVS 4t // issue 1.09 // 09.09.2013Tannoy adopts a policy of continuous improvement and product specification is subject to change
Tannoy (Direct UK) T: 00 44 (0) 1236 420199 E: [email protected] (ROW sales) T: 00 45 8742 7000 E: [email protected] (Americas sales) T: 00 1 (519) 745 1158 E: [email protected] Middle East T: 00 971 (04) 4401208 E: [email protected]
Product DescriptionDesigned for a wide variety of discrete small scale sound reinforcement applications, the Tannoy DVS 4 is an ultra compact surface mount loudspeaker of exceptional value and acoustic performance. A full bandwidth loudspeaker designed for commercial, professional and residential applications where environmental durability and high quality sound reproduction are required. For both indoor and limited outdoor use, these speakers are ideally suited to stereo or monaural background or foreground music systems in such applications as diverse as theme park attractions, retail premises, restaurants and cafes, hotel lobbies and bars, corporate audio visual, residential developments and houses of worship.
The point-source design comprises a 100mm (4.00”) mid bass driver with a coaxially mounted 19mm (0.75”) high frequency section mounted in a stylish injection moulded surface-mount enclosure manufactured from ABS material. The new device is certified for water and dust ingress protection to IP64 standard and is currently pending UL Listed status (UL-1480) making it a perfectly capable performer in challenging interior areas such as swimming pools, saunas or work areas where unusually high levels of dust or moisture may be present, as well as most outdoor applications where extreme environmental or harsh weather conditions are not a typical concern.
The highly durable and scuff resistant, high impact ABS enclosure is available in black or white painted finish and comes with an integral mild steel grille (aluminium available as option) designed with optimum aesthetic sensitivity in mind. A steel mounting bracket is included, which fits easily to the device via finger-tightened plastic screw-nut on the top and bottom of the enclosure, making installation quick and hassle-free.Thanks to the point-source driver design, the DVS 4 can be mounted vertically or horizontally without compromising the dispersion and coverage control.
Transformer version – the DVS 4tThe DVS 4t model option is equipped with an internally mounted low insertion loss line transformer for 70V or 100V distributed sound applications. Wattage taps are configurable to the following settings via a rotary tapping switch, which is located on the back panel.
70V: 30W / 15W / 7.5W / 3.75W 100V: 30W / 15W / 7.5W
Features
Applications
• 100mm (4”) coaxial transducer for high performance and durability • 110 degree controlled conical dispersion for optimum coverage• Exceptional performance to value ratio• Weather resistant rated IP64 to EN60529 (IEC529)• Stylish, durable ABS enclosure available in black or white• Phase coherent design for superior vocal articulation and music reproduction• No crossover required, ensuring better phase, impedance and sensitivity response and increased durability • Painted steel yoke bracket supplied.• Five year loudspeaker warranty• Low insertion loss 30W transformer for use in distributed audio installations (DVS 4t only)
• Indoor and outdoor commercial, professional and residential installations• High level stereo or monaural background or foreground music and speech paging systems• Theme parks• Theme bars• Reception / waiting rooms• Airports, convention centres and hotels• Business music systems• Boardrooms and offices• Retail outlets and shopping malls• Restaurants and cafes• Corporate audio visual• Residential developements
UL-1480,UL-2043
DVS 4 / DVS 4t
DVS 4 / DVS 4t // issue 1.09 // 09.09.2013Tannoy adopts a policy of continuous improvement and product specification is subject to change
Tannoy (Direct UK) T: 00 44 (0) 1236 420199 E: [email protected] (ROW sales) T: 00 45 8742 7000 E: [email protected] (Americas sales) T: 00 1 (519) 745 1158 E: [email protected] Middle East T: 00 971 (04) 4401208 E: [email protected]
TECHNICAL SPECIFICATIONS
System DVS 4
Frequency Response (-3dB) (1) 75Hz - 20kHz
Frequency Range (-10dB) (1) 60Hz - 30kHz
System Sensitivity (1W @1m) (2) 84dB
Dispersion (-6dB) 110 degrees conical
Transducers CoaxialLow Frequency 100mm (4.00”) mineral loaded cone materialHigh Frequency 19mm (0.75”)
Crossover 3.9kHz - 2nd order LF, 2nd order HF
Directivity Factor (Q) 6.5 averaged 1kHz to 10kHz
Directivity Index (DI) 5.3 averaged 1kHz to 10kHz
Rated Maximum SPL (2) 100dB (average) 106dB (peak)
Power HandlingAverage 40WProgramme 80WPeak 160W
Recommended Amplifier Power 80W @ 6 Ohms
Nominal Impedance 6 Ohms
Distortion10% Full Power (4.9V) 2nd Harmonic 3rd Harmonic250Hz 0.738% 0.772%1kHz 0.145% 0.234%10kHz 0.070% 0.070%
1% Full Power (1.55V) 2nd Harmonic 3rd Harmonic250Hz 0.320% 0.311%1kHz 0.078% 0.174%10kHz 0.087% 0.087%
Notes(1) Average over stated bandwidth. Measured at 1 metre on axis in an anechoic chamber.(2) Unweighted pink noise input, measured at 1 metre in an anechoic chamber.
A full range of measurements, performance data, and Ease™ Data can be downloaded from www.tannoy.com
Tannoy operates a policy of continuous research and development. The introductionof new materials or manufacturing methods will always equal or exceed thepublished specifications, which Tannoy reserves the right to alter without priornotice. Please verify the latest specifications when dealing with critical applications.
Ordering Information
PART NUMBER MODEL NAME COLOUR GRILLE PACKED QUANTITY 8001 6710 DVS 4 Black Aluminium 2 8001 6711 DVS 4 White Aluminium 2 8001 6720 DVS 4t Black Aluminium 2 8001 6721 DVS 4t White Aluminium 2
ConstructionEnclosure ABS
Grille Aluminium, Painted
Connectors Euroblock type removable locking connector with screw terminals with “loop through” facility
Transformer settting Rotary switch
Supplied Accessories Yoke bracket
Dimensions (H x W x D) 277.0 x 170.4 x 165.6mm (10.91” x 6.71” x 6.52”)
Net Weight 1.8kg (3.96lbs)
Shipped weight 5.4kg (11.9lbs)
Packed quantity 2
Transformer Version specifications as above except:
Transformer Taps (rear rotary switch) 70V 30W / 15W / 7.5W / 3.75W / OFF & Low Impedance operation 100V 30W / 15W / 7.5W / OFF & Low Impedance operation
Maximum wire gauge 2.5 mm2 CSA (AWG12)for connector
Safety Agency Ratings UL-1480, UL-2043, CE
Net Weight 2.3kg (5.07lbs)
Shipped weight 6.2kg (13.66lbs)
Packed quantity 2
DVS 4 / DVS 4t
DVS 4 / DVS 4t // issue 1.09 // 09.09.2013Tannoy adopts a policy of continuous improvement and product specification is subject to change
Tannoy (Direct UK) T: 00 44 (0) 1236 420199 E: [email protected] (ROW sales) T: 00 45 8742 7000 E: [email protected] (Americas sales) T: 00 1 (519) 745 1158 E: [email protected] Middle East T: 00 971 (04) 4401208 E: [email protected]
PERFORMANCE MEASUREMENTS
ANECHOIC FREQUENCY RESPONSE
IMPEDANCE
HORIzONTAL OFF-AxIS RESPONSE
Frequency (Hz)
Frequency (Hz)
Frequency (Hz)
Sen
sitiv
ity re
1W
@ 1
m (d
B)
Impe
danc
e (o
hms)
Leve
l, (d
B)
40
50
60
70
80
90
10 100 1000 10000
Se
ns
itiv
ity
re
1W
@ 1
m (
dB
)
Frequency (Hz)
1m on-axis Frequency Response 1m on-axis Frequency Response
0
5
10
15
20
25
30
35
40
45
10 100 1000 10000
Imp
ed
an
ce (
oh
ms)
Frequency (Hz)
Impedance vs frequency Impedance vs frequency
-40
-30
-20
-10
0
10
10 100 1000 10000 100000
Lev
el (
dB
)
Frequency (Hz)
Horizontal Off-axis Frequency Response
0 deg
10 deg
20 deg
30 deg
40 deg
Horizontal Off-axis Frequency Response
DVS 4 / DVS 4t
DVS 4 / DVS 4t // issue 1.09 // 09.09.2013Tannoy adopts a policy of continuous improvement and product specification is subject to change
Tannoy (Direct UK) T: 00 44 (0) 1236 420199 E: [email protected] (ROW sales) T: 00 45 8742 7000 E: [email protected] (Americas sales) T: 00 1 (519) 745 1158 E: [email protected] Middle East T: 00 971 (04) 4401208 E: [email protected]
PERFORMANCE MEASUREMENTS
UPPER VERTICAL OFF-AxIS RESPONSE
LOWER VERTICAL OFF-AxISRESPONSE
BEAMWIDTH
Frequency (Hz)
Frequency (Hz)
Frequency (Hz)
Leve
l (dB
)Im
peda
nce
(ohm
s)D
egre
es
-40
-30
-20
-10
0
10
10 100 1000 10000 100000
Lev
el (
dB
)
Frequency (Hz)
Upper Vertical Off-axis Frequency Response
0 deg
10 deg
20 deg
30 deg
40 deg
Upper Vertical Off-axis Frequency Response
-40
-30
-20
-10
0
10
10 100 1000 10000 100000
Lev
el (
dB
)
Frequency (Hz)
Lower Vertical Off-axis Frequency Response
0 deg
10 deg
20 deg
30 deg
40 deg
Lower Vertical Off-axis Frequency Response
0
30
60
90
120
150
180
210
240
270
300
330
360
100 1000 10000
Horizontal Beamwidth (1/3 Octave) Vertical Beamwidth (1/3 Octave)
Beamwidth vs Frequency
DVS 4 / DVS 4t
DVS 4 / DVS 4t // issue 1.09 // 09.09.2013Tannoy adopts a policy of continuous improvement and product specification is subject to change
Tannoy (Direct UK) T: 00 44 (0) 1236 420199 E: [email protected] (ROW sales) T: 00 45 8742 7000 E: [email protected] (Americas sales) T: 00 1 (519) 745 1158 E: [email protected] Middle East T: 00 971 (04) 4401208 E: [email protected]
PERFORMANCE MEASUREMENTS
DIRECTIVITY INDEx
Frequency (Hz)
dB
0
5
10
15
20
100 1000 10000
dB
DI vs Frequency
DVS 4 / DVS 4t
DVS 4 / DVS 4t // issue 1.09 // 09.09.2013Tannoy adopts a policy of continuous improvement and product specification is subject to change
Tannoy (Direct UK) T: 00 44 (0) 1236 420199 E: [email protected] (ROW sales) T: 00 45 8742 7000 E: [email protected] (Americas sales) T: 00 1 (519) 745 1158 E: [email protected] Middle East T: 00 971 (04) 4401208 E: [email protected]
PERFORMANCE MEASUREMENTS POLAR PLOTS (1/3 OCTAVE) HORIZONTAL
-48
-36
-24
-12
0
120
150
180
210
240
100 Hz
125 Hz
160 Hz
200 Hz
-48
-36
-24
-12
0
120
150
180
210
240
250 Hz
315 Hz
400 Hz
500 Hz
-48
-36
-24
-12
0
120
150
180
210
240
630 Hz
800 Hz
1kHz
1.25 kHz
-48
-36
-24
-12
0
120
150
180
210
240
1.6 kHz
2 kHz
2.5 kHz
3.15 kHz
-48
-36
-24
-12
0
120
150
180
210
240
4 kHz
5 kHz
6.3 kHz
8 kHz
-48
-36
-24
-12
0
120
150
180
210
240
10 kHz
12.5 kHz
16 kHz
20 kHz
100 Hz125 Hz160 Hz200 Hz
250 Hz315 Hz400 Hz500 Hz
630 Hz800 Hz1 kHz1.25 kHz
1.6 kHz2 kHz2.5 kHz3.15 kHz
4 kHz5 kHz6.3 kHz8 kHz
10 kHz12.5 kHz16 kHz20 kHz
270 90
300 60
330 30
0
270 90
300 60
330 30
0
270 90
300 60
330 30
0
270 90
300 60
330 30
0
270 90
300 60
330 30
0
270 90
300 60
330 30
0
DVS 4 / DVS 4t
DVS 4 / DVS 4t // issue 1.09 // 09.09.2013Tannoy adopts a policy of continuous improvement and product specification is subject to change
Tannoy (Direct UK) T: 00 44 (0) 1236 420199 E: [email protected] (ROW sales) T: 00 45 8742 7000 E: [email protected] (Americas sales) T: 00 1 (519) 745 1158 E: [email protected] Middle East T: 00 971 (04) 4401208 E: [email protected]
PERFORMANCE MEASUREMENTS POLAR PLOTS (1/3 OCTAVE) VERTICAL
-48
-36
-24
-12
0
120
150
180
210
240
100 Hz
125 Hz
160 Hz
200 Hz
-48
-36
-24
-12
0
120
150
180
210
240
250 Hz
315 Hz
400 Hz
500 Hz
-48
-36
-24
-12
0
120
150
180
210
240
630 Hz
800 Hz
1kHz
1.25 kHz
-48
-36
-24
-12
0
120
150
180
210
240
1.6 kHz
2 kHz
2.5 kHz
3.15 kHz
-48
-36
-24
-12
0
120
150
180
210
240
4 kHz
5 kHz
6.3 kHz
8 kHz
-48
-36
-24
-12
0
120
150
180
210
240
10 kHz
12.5 kHz
16 kHz
20 kHz
100 Hz125 Hz160 Hz200 Hz
250 Hz315 Hz400 Hz500 Hz
630 Hz800 Hz1 kHz1.25 kHz
1.6 kHz2 kHz2.5 kHz3.15 kHz
4 kHz5 kHz6.3 kHz8 kHz
10 kHz12.5 kHz16 kHz20 kHz
270 90
300 60
330 30
0
270 90
300 60
330 30
0
270 90
300 60
330 30
0
270 90
300 60
330 30
0
270 90
300 60
330 30
0
270 90
300 60
330 30
0
DVS 4 / DVS 4t
DVS 4 / DVS 4t // issue 1.09 // 09.09.2013Tannoy adopts a policy of continuous improvement and product specification is subject to change
Tannoy (Direct UK) T: 00 44 (0) 1236 420199 E: [email protected] (ROW sales) T: 00 45 8742 7000 E: [email protected] (Americas sales) T: 00 1 (519) 745 1158 E: [email protected] Middle East T: 00 971 (04) 4401208 E: [email protected]
DIMENSIONAL SKETCHES
51.0(2.01”)
165.6(6.52”)
153.6(6.05”)
170.4(6.71”)
277.0(10.91”)
246.4(9.70”)
259.0(10.20”)
182.0(7.17”)
4.6(0.18”)
143.0(5.63”)
29.7(1.17”)
SUPPLIED ACCESSORIESDVS 4 Yoke Bracket
DVS 4 BRACKET
255.0 [10.04"]
91.0 [3.58"]
51.0 [2.01"]
182.0 [7.17"]
143.0 [5.63"]
�12.0 [�0.47"]
R35.0 [R1.38"]
4.6 [0.18"]
255.0(10.04”)
R35.0(R1.38”)
91.0(3.58”)
51.0(2.01”)
4.6(0.18”)
182.0(7.17”)
143.0(5.63”)
4.6(0.18”)
12.0(0.47”)
DVS 4 / DVS 4t
DVS 4 / DVS 4t // issue 1.09 // 09.09.2013Tannoy adopts a policy of continuous improvement and product specification is subject to change
Tannoy (Direct UK) T: 00 44 (0) 1236 420199 E: [email protected] (ROW sales) T: 00 45 8742 7000 E: [email protected] (Americas sales) T: 00 1 (519) 745 1158 E: [email protected] Middle East T: 00 971 (04) 4401208 E: [email protected]
Architectural specifications DVS 4 The weather resistant, surface mount speaker system shall consist of a 100mm (4.00”) mineral loaded mid bass driver with coaxially mounted 19mm (0.75”) high frequency unit and passive frequency dividing network optimally tuned vented, injection moulded high impact polystyrene (HIPS) enclosure IP64 to EN60529. The protective grille shall be constructed from mild steel or aluminium with a weather resistant coating.
Performance of the DVS 4 surface mount speaker shall meet or exceed the following criteria: The system shall have a conical coverage pattern of 110 degrees (-6dB). Frequency response measured on axis shall be 75Hz-20kHz (-10dB) from rated sensitivity, average over stated bandwidth. Measured 1 metre in an anechoic chamber) with no equalisation. Sensitivity shall be 84dB (1W=2.45V for 6 Ohms). Long term power handling capacity as defined in EIA-426B test shall be 40W, recommended amplifier power 80W. The nominal system impedance shall be 6 Ohms (in low impedance setting).
A removable Euroblock type locking connector with screw terminals to secure wire termination with “loop through” facility shall be provided. A yoke mounting bracket shall be included with the speaker system.
The dimensions shall not exceed (H)277.0 x (W)170.4 x (D)165.6mm (10.91 x 6.71 x 6.52”)
The surface mount system shall be the ….. DVS 4
Architectural specifications DVS 4tThe weather resistant, surface mount speaker system shall consist of a 100mm (4.00”) mineral loaded mid bass driver with coaxially mounted 19mm (0.75”) high frequency unit and passive frequency dividing network optimally tuned vented, injection moulded high impact polystyrene (HIPS) enclosure IP64 to EN60529. The protective grille shall be constructed from mild steel aluminium with a weather resistant coating.
Performance of the DVS 4t surface mount speaker shall meet or exceed the following criteria: The system shall have a conical coverage pattern of 110 degrees (-6dB). Frequency response measured on axis shall be 75Hz-20kHz (-10dB) from rated sensitivity, average over stated bandwidth. Measured 1 metre in an anechoic chamber) with no equalisation. Sensitivity shall be 84dB (1W=2.45V for 6 Ohms). Long term power handling capacity as defined in EIA-426B test shall be 40W, recommended amplifier power 80W. The nominal system impedance shall be 6 Ohms (in low impedance setting).
The DVS 4t speaker system shall be equipped with a 30W high performance line transformer for use with 70.7 or 100 Volt distributed audio systems with 30W / 15W / 7.5W / 3.75W*Watt, OFF and low impedance settings.
A removable Euroblock type locking connector with screw terminals to secure wire termination with “loop through” facility shall be provided. A yoke mounting bracket shall be included with the speaker system.
The dimensions shall not exceed (H) 277.0 x (W) 170.4 x (D)165.6mm (10.91 x 6.71 x 6.52”)
The surface mount system shall be the ….. DVS 4t
*70 Volt only
DVS 4 / DVS 4t
DVS 4 / DVS 4t // issue 1.09 // 09.09.2013Tannoy adopts a policy of continuous improvement and product specification is subject to change
Tannoy (Direct UK) T: 00 44 (0) 1236 420199 E: [email protected] (ROW sales) T: 00 45 8742 7000 E: [email protected] (Americas sales) T: 00 1 (519) 745 1158 E: [email protected] Middle East T: 00 971 (04) 4401208 E: [email protected]
NOTES
DVS 4 / DVS 4t
DVS 4 / DVS 4t // issue 1.09 // 09.09.2013Tannoy adopts a policy of continuous improvement and product specification is subject to change
Tannoy (Direct UK) T: 00 44 (0) 1236 420199 E: [email protected] (ROW sales) T: 00 45 8742 7000 E: [email protected] (Americas sales) T: 00 1 (519) 745 1158 E: [email protected] Middle East T: 00 971 (04) 4401208 E: [email protected]
NOTES
DVS 4 / DVS 4t
DVS 4 / DVS 4t // issue 1.09 // 09.09.2013Tannoy adopts a policy of continuous improvement and product specification is subject to change
Tannoy (Direct UK) T: 00 44 (0) 1236 420199 E: [email protected] (ROW sales) T: 00 45 8742 7000 E: [email protected] (Americas sales) T: 00 1 (519) 745 1158 E: [email protected] Middle East T: 00 971 (04) 4401208 E: [email protected]
NOTES