DVB-S2 HD SRT4902
Transcript of DVB-S2 HD SRT4902
Block B, Hytera Tech-Zone, 4th Baolong Road, Longgang,
Shenzhen, China P.C.: 518116
www.x2sat.com / http://x-squre-tech.en.alibaba.com
Cell:+86-138 2528 3505 / E-mail: [email protected]
High Definition Digital Satellite Television Receiver and Recorder
SRT-4902
� USB PVR Ready
� Up to 667 MHz CPU
� HDMI Output-1080p Resolution Support
� Tuner: DVB-S/DVB-S2
� DiseqC 1.0-1.1-1.2
� 1 x Smartcard-Reader
� RS232 Interface
� S/PDIF Output
� 2 x USB 2.0 Interface
� 2GB Build-in RAM
� Upgrade Via FTP, USB, RS-232
� Build-in WIFI, Internet Applications
� Videotext Decoder
� Standby < 1 Watt
》DVB-S2 / SRT-4902
Block B, Hytera Tech-Zone, 4th Baolong Road, Longgang,
Shenzhen, China P.C.: 518116
www.x2sat.com / http://x-squre-tech.en.alibaba.com
Cell:+86-138 2528 3505 / E-mail: [email protected]
1YearGuarantee
》DVB-S2 / SRT-4902 SPECIFICATION
General information
- Free to Air , Auto Scan/TP Scan/ Blind Scan
- Receiving Standard Definition and High Definition TV and Radio channels
- TV Recording over USB drives (PVR-ready)*
- High Speed searching program
- Number of channels: MAX 5000 memory store
- EPG: up to 7-days based on SI information Physical Specification
- Teletext supported, Support Favorites Group
- Energy saving, Standby mode less than 1W
- Multi-Languages Support, PAL & NTSC Auto conversion, FULL HD Receiver
- Media Player supporting MPEG2, MPEG4, MKV, AVI, FLV, JPEG, BMP
PNG,MP3,WMA..ETC
- Software update over RS-232 Serial Port , By USB, By FTP from
inside the receiver, from X2 Website.
Satellite Front-End
- Modulation: Fully Compliant with DVB-S , DVB-S2 (MPEG4 , H.264)
- Input connector: F-connector LNB IN (KU/C BAND)
- Frequency range: 950-2150 MHz
- Symbol rate range: 2-90 MSPS
- Input level: - 25 to - 65 dBm
- LNB voltage: 13/18 V max 400 mA
- Tone control: 22 KHZ
- LNB Control: DiSEqC 1.0/1.2/1.3 USALS
- KU/C Band Supported
Video Decoding & Audio Decoding
- Audio Channel : Mute, Left, Right and Stereo , Joint Stereo
- Audio Decoding : MPEG-1 , MPEG-2 layer I and II & MPEG-4
- Video Resolution : High Definition & Standard Definition
Rear panel Interfaces (Input connector):
- Satellite IF Input : F-type (LNB IN)
- 2 x Audio L/R (RCA),
- 1 x Video Signal (RCA)
- 1 x RS-232 (9-pin D-sub male)
- HDMI Port
- USB (PVR & WiFi Dongle supported) USB Hub Supported
- SPDIF
Front panel Interfaces
- Standby Power button, Menu, Ok, Volume up/down,
- Channel up/down and menu navigation keys
- 2-power LED Indicator
- 1 Standby LED Indicator
- 1 Signal LED Indicator
- IR Sensor.
- CA "Multi CAS Card Reader"
- 1 USB (PVR & WiFi Dongle supported) USB Hub Supported
Power Requirements
- Mains input voltage: 100V~250v
- Mains input frequency: 50 / 60 Hz
- Power consumption: Typ.: 8W MAX.
Physical Specification
- Size (W x D x H): 260 mm x 235 mm x 65 mm
- Operating temperature: +5°C to +45°C
- Storage temperature: -20°C to +65°C
ACCESSORIES
RCA Cable 3 v 3 HDMI CableRCU x 1 CD (SW,User Manual)
www.x2sat.com
SRT-4902