DuPont Industrial Coatings - A leading auto paint ... · PDF fileCorlar® Epoxies...

ER-00000 K-00000

DuPont Industrial Coatings

Coating Solutions That WorkCopyright © 2008 DuPont. The DuPont Oval Logo, DuPont TM, The miracles of scienceTM, Imron®, Corlar ®, Tufcote®, WP T M , ColorNet ® and Acquire RX TM are trademarks or registered trademarks of E.I. du Pont de Nemours and Company or its affiliates. All rights reserved.

Imron® Polyurethanes, Corlar® Epoxies and Tufcote® Alkyds and Acrylics are for professional use only.

Call your authorized DuPont Industrial Coatings Distributor for full details.

To find a distributor in your area, visit www.industrialcoatings.dupont.com or call In the United States – 1.800.GET.DUPONTIn Canada – 1.800.668.6945

Denotes environmentally-friendly products.

E-R4983(08/08)

Reader 1: __________ Date: __________

Reader 2: __________ Date: __________

CSD: __________ Date: __________

QA: __________ Date: __________

PROD: __________ Date: __________

AD/PD: __________ Date: __________

OSP: __________ Date: __________

Validations In: __________ Date: __________

Reader 1: __________ Date: __________ AD/PD: __________ Date: __________

STAGE 1: Internal proofing by one reader from Account Team.

STAGE 3: As released, flight for final. STAGE 2: Internal proofing by two readers; one from the Account Team and another unassociated party.

Job No: 11636

CSD: Customer Service Dept. QA: Quality Assurance PROD: Production Dept. AD/PD: Account or Project Director OSP: Outside Proofreader

Rev: 5 Designer: ZD Date: 08/5/08Title: DIC Brochure

ApprovedYES NO

ApprovedYES NO

ApprovedYES NO

ApprovedYES NO

11636_DIC_Brochure_r5.indd 1-2 8/5/08 3:55:02 PM

Corlar® Epoxies

Imron® Polyurethanes

DuPontTM Imron® Polyurethanes are based

on patented DuPontTM resin technology.

They’re known for superior color and

gloss retention, durability and ease of use.

Imron® Polyurethanes dry fast and cure

at low a temperature, leaving the popular

“wet look” that appears as if they had just

been applied. They offer multiple gloss

levels, from high gloss to flat.

Tufcote® Alkyds provide very quick drying

products with good corrosion resistance in

mild environments.

Polyacryl anhydride products are based

on patented non-isocyanate DuPont

technology. They deliver good gloss and

color retention in a durable finish.

From DuPont science comes these

popular epoxies based on DuPont

modified polyamide epoxy technology.

Corlar® Epoxies are highly durable,

formulated for a wide variety of uses,

and provide outstanding corrosion and

chemical resistance.

It’s easy to go green … with guts!

DuPontTM Imron® Polyurethanes

are available in waterborne and

solventborne versions.

They can be applied by brush,

roller or spray.

Corlar® Epoxies can be applied with

brush, roller or spray. They create films

that resist solvents and chemicals and

are tough and abrasion resistant.

In the Corlar® line, many products are

recognized for their surface tolerant and

direct-to-metal capabilities.

They are easily applied via brush, roller

or spray application.

Tufcote® Alkyds & Acrylics

QuAlITy you CAn CounT on. For more than 80 years, people have relied on DuPont Industrial

Coatings for superior value and proven results.

Whatever your challenge, you can choose from a wide range of

polyurethanes, epoxies, alkyds and acrylic coatings designed for

tough environments and difficult surface conditions.

DuPont Industrial Coatings products can be applied by brush,

roller and a variety of spray application methods. They’re

available in factory-packaged colors and can be mixed to match

an extremely wide variety of custom colors.

DuPont Industrial Coatings has long been recognized as the

leader in long-term coating effectiveness and life cycle cost in

industries such as:

n Construction Equipment

n Ready Mix Concrete Plants and Equipment

n Hot Mix Asphalt Plants and Equipment

n Fabricators and Manufacturers

n Rail – Locomotive, Transit Car and Covered Hopper Cars

n Commercial, Industrial and Institutional Facilities

n Amusement Park Rides and Equipment

n Ski Resorts

n Portable and Modular Buildings

DuPont Industrial Coatings

DuPont Industrial Coatings…. providing Coating Solutions That Work for over 80 years.

DuPont Industrial Coatings offers a wide variety of

environmentally-friendly solventborne and waterborne products to choose from.

They’re available in a variety of gloss levels, and are recognized for superior value and proven results.



Imron® Polyurethanes are available in environmentally-

friendly solventborne and waterborne versions that make

it easy to Go Green… with Guts.

Whichever you choose, they combine superior color and gloss

retention and durability with ease of application. These coatings

can be applied by brush, roller or spray – that gives you maximum flexibility.

Imron® coatings can be applied over most other old coatings. They are available in multiple gloss

levels from high gloss to flat and may be applied in temperatures as low as 35ºF (1.7ºC).

Reference the chart below for the product attributes of the Imron® Polyurethane that

best fits your application requirements. See the product data sheet for additional product

attributes and the application guide for complete product usage instructions.

Product Description Product Attributes

Solv

entb

orne

Top

coat

s

Imron® 2.1 HG™ High Gloss (Mix Quality ‘VF’)n Industry-leading polyurethane performancen Custom colors & variable gloss availabilityn Flexible application - brush, roll or sprayn Low temp cure

Imron® 2.1 SG™ Semi Gloss (Mix Quality ‘VG’)

Imron® 2.1 ST™ Satin Gloss (Mix Quality ‘VH’)

Imron® 2.1 FT™ Flat (Mix Quality ‘VI’)

Imron® 3.5 HG™ High Gloss Polyurethanen Add outstanding color and gloss retentionn Highly durable finish delivers industry leading polyurethane

performance.n Outstanding abrasion resistance and flexibilityn Very low temp application (as low as 35ºF (1.7ºC))

Imron® 3.5 SG™ Semi-Gloss Polyurethane

Imron® 3.5 ST™ Satin Gloss Polyurethane

Imron® 3.5 FT™ Flat Polyurethane

Pri

mer

Imron® 2.1 PR™ Polyurethane Primern Smooth, sandable enabling the best possible topcoat appearancen Fast dry

Imron® 2.8 PR™ Polyurethane Primer

n Flexible primer delivers a smooth surface for maximum topcoat appearance.

n Outstanding flexibilityn Fast dry to recoat and handling

DT

M

Imron® 2.1 HG-D™ High Gloss, High Build Direct-to-Metal Polyurethane

n Mixed to match custom colorsn High build protection in one coatn Fast dry

Imron® 3.5 HG-D™ High Gloss DTM Urethane

n Provides additional protection to extend a topcoat’s color lifen Highly durable, one-step coating suitable for

non-corrosive exposuresn Excellent Hidingn High Build

Cle

ars

Imron® 2.1 HG-C™ High Gloss Polyurethane Clear

n Enhances and extends outstanding color & gloss properties over Imron topcoats

n Highly durable finish n Very low HAPS n Very low temp application (as low as 35ºF (1.7ºC))

Imron® 2.1 EZ-C™ Easy to clean, industrial strength, Clear Polyurethane

n Unique DuPont technology n Easy to clean propertiesn Restores gloss to dull, faded finishes

Imron® 2.8 FT-C™ Flat Clear Polyurethanen Restores faded finishes without glossn Outstanding color protection

Imron® 3.4 HG-C™ High Gloss Clear Polyurethanen Provides additional protection to extend a topcoat’s color lifen Outstanding gloss and color retentionn Very low temp application (as low as 35ºF (1.7ºC))

Imron® 3.5 HG-C™ High Gloss Clear Polyurethane - Spray

n Provides additional protection to extend a topcoat’s color lifen Provides the cleanest, “wet” appearancen Coated surfaces will be easy to cleann Restores gloss to dull, faded finishes


Wat

erbo

rne

Top

coat

s

Imron® ZV-HG™

High Gloss, Waterborne Polyurethane Enamel (Mix Quality ‘WJ’)

n Zero VOC & Zero HAPSn Performance equal to solvent-borne productsn Lowest environmental footprintn Outstanding abrasion resistance and flexibilityn Custom color capability

Imron® 1.2 HG™ High Gloss Waterborne Polyurethane Copolymer Topcoat

n Unique DuPont waterborne polyurethane copolymer technologyn High gloss with highly durable performancen Color Mix Capabilityn Zero HAPSn One component (1K)

Pri

mer

Imron® 1.5 PR™ Waterborne Polyurethane Copolymer Primer

n Unique DuPont waterborne polyurethane copolymer technologyn Zero HAPSn Fast dryn Very good performance

DT

M Imron® 1.5 ST-D™ Satin Waterborne Polyurethane Copolymer DTM

n Unique DuPont waterborne polyurethane copolymer technologyn Single coat, high build direct-to-metal applicationsn Fast dryn Very good performancen One component (1K)

Cle

ars

Imron® ZV-HG-C™ High Gloss, Waterborne Polyurethane Enamel - Clearcoat

n Zero VOC & Zero HAPSn Performance equal to solvent-borne productsn Lowest environmental footprintn Outstanding abrasion resistance and flexibilityn Custom color capability

Imron® 1.2 HG-C™ High Gloss Clear Waterborne Polyurethane Copolymer

n Unique DuPont waterborne polyurethane copolymer technologyn Restores gloss to dull, faded finishesn Very good color and gloss retentionn One component (1K)n Fast dry

Imron® 1.8 FT-C™ Flat Clear Waterborne Polyurethane Copolymer

n Unique DuPont waterborne polyurethane copolymer technologyn Helps restore & refresh protection to existing low gloss surfacesn Very good color retentionn One component (1K)n Fast dry


Corlar® Epoxies

Highly durable Corlar® Epoxies are formulated for a wide variety of uses and provide

outstanding corrosion and chemical resistance.

Most Corlar® Epoxy Products are also recognized for their surface tolerant and

direct-to-metal capabilities.

These environmentally-friendly products offer the benefit of no induction time and may

be applied by brush, roller or spray applications in temperatures as low as 35ºF (1.7ºC).

Tufcote® Alkyds & Acrylics

These quick-drying alkyd products feature excellent

corrosion resistance and are extremely durable in

mild environments.

Tufcote® alkyd products are based on DuPont alkyd

technology. They are very quick drying primers with good

corrosion resistance and are very durable in non-corrosive

environments.

Tufcote® anhydride products are based on patented DuPont non-isocyanate

technology. Their highly durable finish delivers good performance.

They offer improved solvent resistance, hardness, gloss and color retention

compared to conventional alkyd enamels.

They apply easily via brush, roller or spray application.


Top

coat

s

Corlar® 2.8 HG™ High Gloss Epoxy

n Provides additional protection to extend a topcoat’s color lifen Highly durable coating delivers outstanding corrosion and chemical

resistancen Smooth appearance with high gloss and custom color capabilityn Low temp application (as low as 40ºF (4.4ºC))

Pri

mer

Corlar® LV-A™ Very High Solids Aluminum Epoxy Mastic

n DuPont amido amine cured epoxy technologyn Very low VOC < 0.8 lbsn Delivers outstanding corrosion & chemical resistancen High build - up to 10 mil DFT per coatn Smooth appearancen Outstanding abrasion resistance and edge protectionn Can be applied over marginal surface prep

Corlar® LV PR™ Very High Solids Epoxy Mastic

Corlar® 2.1 PR-P™ High Solids Productive Epoxy Primer

n Highly durable, very fast dry primern Low temperature application / cure (as low as 35ºF (1.7ºC))n Smooth, sandable primern Up to 5 mil DFT per coatn Two component (2K)

Corlar® 2.1 PR™ High Solids Epoxy Mastic Primer

n Delivers superior corrosion & chemical resistance, abrasion resistance, and edge protection

n Can be applied over marginally prepared surfacesn Low temperature application/cure (as low as 35ºF (1.7ºC))n Application over damp surfaces or high humidityn High Build - up to 6 mil DFT per coatn Color Mix Capability

Corlar® 2.8 PR™ High Solids Epoxy Primern Highly durable coating delivers excellent corrosion and chemical

resistance n No induction time and long pot life

DT

M

Corlar® LV SG™ Very High Solids Semi-Gloss Epoxy Mastic


Corlar® 2.1 ST™ Satin High Solids Epoxy Mastic


n Can be applied over marginally prepared surfacesn Low temperature application/cure (as low as 35ºF (1.7ºC))n Application over damp surfaces or high humidityn High Build - up to 6 mil DFT per coatn Color Mix Capability

Corlar® 2.1 HTA™ High Temperature Aluminum Epoxy Mastic

n Same as Corlar® 2.1 PR™ with applications to high temp surfaces (450ºF (232ºC) continuous or 500ºF (260ºC) intermittent)

Corlar® 2.8 HG-D™ High Gloss, High Build Epoxy DTMn Single coat application up to 5 mils dry film thicknessn Excellent resistance to chemicalsn Low temp application (as low as 40ºF (4.4ºC))


Top

coat

s

Tufcote® 3.5 HG-P™ High Gloss Alkyd with Polyurethane Modification

n Delivers very quick dry times with improved solvent resistance, hardness, gloss and color retention

n Available in a wide variety of custom colorsn Improved performance vs. conventional alkyd coatings

Tufcote® 3.5 HG-NI™ High Gloss Non-Isocyanate Polyacryl Anhydride

n Highly durable finish delivers performance comparable to DuPont Imron® and competitive polyurethane coatings.

n Excellent resistance to Skydroln Very good abrasion resistance and flexibility

Pri

mer

Tufcote® 2.5 PR™ High Solids Fast Dry Alkyd Primer n Quick drying coating delivers good corrosion resistance n Universal primer for use under lacquer or enamel topcoatsn Fast dry and handling times will improve productivityn Indefinite pot life, single component and no thinning n Provides corrosion protection during transport and construction

Tufcote® 2.8 PR™ High Solids Fast Dry Alkyd Primer

Tufcote® 3.3 PR™ High Solids Fast Dry Alkyd Primer

Tufcote® 3.5 PR™ Fast Dry Alkyd Primer

n Very quick drying primer delivers good corrosion resistancen Provides corrosion protection during transport and constructionn Universal primer for use under lacquer or enamel topcoatsn Indefinite pot life, single component and no thinning

DT

M

Tufcote® 1.9 HG-D™ High Gloss Waterborne Acrylic DTM

n Low odor, easy-to-use productn Good gloss and color retentionn Direct-to-metal applicationn One component (1K)

Tufcote® 3.5 HG-D™ High Gloss DTM Alkyd

n Quick dry coating is very durable in non-corrosive environments

n Wide variety of custom colors availablen DTM (direct-to-metal) is required for interior exposure



Product Description Product Attributes Application

Top

coat

s Imron® 1.2 HG™

High Gloss Waterborne Polyurethane Copolymer Topcoat

n Unique DuPont waterborne polyurethane copolymer technologyn High gloss with highly durable performancen Color Mix Capabilityn Zero HAPSn One component (1K)

DuPont Industrial Coatings offers full product line with the versatility to Brush, Roll, Spray.

Imron® 2.1 FT™ Flat Topcoatn Industry-leading polyurethane performancen Custom colors & variable gloss availabilityn Flexible application - brush, roll or sprayn Low temp cure

Imron® 2.1 SG™ Semi Gloss Topcoat

Imron® 2.1 ST™ Satin Topcoat

Imron® 2.1 HG™ High Gloss Topcoat

Pri

mer

Imron® 1.5 PR™ Waterborne Polyurethane Copolymer Primer

n Unique DuPont waterborne polyurethane copolymer technologyn Zero HAPSn Fast dryn Very good performance

Imron® 2.1 PR™ Polyurethane Primern Smooth, sandable enabling the best possible topcoat appearancen Fast dry

DT

M

Imron® 1.5 ST-D™

Satin Waterborne Polyurethane Copolymer DTM

n Unique DuPont waterborne polyurethane copolymer technologyn Single coat, high build direct-to-metal applicationsn Fast dryn Very good performancen One component (1K)

Imron® 2.1 HG-D™ High Gloss, High Build Direct-to-Metal Polyurethane

n Mixed to match custom colorsn High build protection in one coatn Fast dry

Cle

arco

ats

Imron® ZV HG™

High Gloss, Waterborne Polyurethane Enamel (Mix Quality ‘WJ’)

n Zero VOC & Zero HAPSn Performance equal to solvent-borne productsn Lowest environmental footprintn Outstanding abrasion resistance and flexibilityn Custom color capabilityImron® ZV HG-C™

High Gloss, Waterborne Polyurethane Enamel - Clearcoat

Imron® 1.2 HG-C™ High Gloss Clear Waterborne Polyurethane Copolymer

n Unique DuPont waterborne polyurethane copolymer technologyn Restores gloss to dull, faded finishesn Very good color and gloss retentionn One component (1K)n Fast dry

Imron® 1.8 FT-C™ Flat Clear Waterborne Polyurethane Copolymer

n Unique DuPont waterborne polyurethane copolymer technologyn Helps restore & refresh protection to existing low gloss surfacesn Very good color retentionn One component (1K)n Fast dry

Imron® 2.1 HG-C™ High Gloss Polyurethane Clear

n Enhances and extends outstanding color & gloss properties over Imron topcoats

n Highly durable finish n Very low HAPS n Very low temp application (as low as 35ºF (1.7ºC))

Imron® 2.1 EZ-C™ High Gloss, Easy to Clean Industrial Strength Clear

n Unique DuPont technology n Easy to clean propertiesn Restores gloss to dull, faded finishes

Corlar® Epoxies


Top

coat

s /

DT

M

Corlar® LV SG™ Very High Solids Semi-Gloss Epoxy Mastic


Brush, Roll, Spray available from DuPont Industrial Coatings

Corlar® 2.1 ST™ Satin High Solids Epoxy Mastic


n Can be applied over marginally prepared surfacesn Low temperature application/curen Application over damp surfaces or high humidityn High Build - up to 6 mil DFT per coatn Color Mix Capability

Corlar® 2.1 HTA™ High Temperature Aluminum Epoxy Mastic

n Same as above with applications to high temp surfaces (450ºF (232ºC) continuous or 500ºF (260ºC) intermittent)

Pri

mer

Corlar® LV A™ Very High Solids Aluminum Epoxy Mastic Primer


Corlar® LV PR™ Very High Solids Semi-Gloss Epoxy Mastic

Corlar® 2.1 PR™ High Solids Epoxy Mastic Primer


n Can be applied over marginally prepared surfacesn Low temperature application/curen Application over damp surfaces or high humidityn High Build - up to 6 mil DFT per coatn Color Mix Capability

Corlar® 2.1 PR-P™ High Solids Productive Epoxy Primer

n Highly durable, very fast dry primern Low temperature application / curen Smooth, sandable primern Up to 5 mil DFT per coatn Two component (2K)

Tufcote® Acrylics


DT

M

Tufcote® 1.9 HG-D™ High Gloss Waterborne Acrylic DTM

n Low odor, easy-to-use productn Good gloss and color retentionn Direct-to-metal applicationn One component (1K)

Brush, Roll, Spray available from DuPont Industrial Coatings

High Performance … low Environmental Footprint.Thanks to DuPont science, you don’t have to sacrifice quality and performance to lower your environmental footprint. DuPont Industrial Coatings are available in industrial strength, high performance polyurethane, epoxy and acrylic products with a VOC of 2.1/gal. or less, well below the current National Rule.

Go green with guts!

NEW!

NEW!


your InDuSTrIAl CoATIngS rESourCE... For CoATIng SoluTIonS THAT Work! Not only can you count on DuPont Industrial

Coatings for superior value and proven results,

you can count on finding them readily available in

virtually every region of the country.

DuPont Industrial Coatings are available through a

broad network of distributors, so you can be assured

of getting the coatings you need, when and where

you need them.

DuPont has created a number of tools to help you

understand and use our Industrial Coatings. The

knowledgeable representatives at your local DuPont

Industrial Coatings Distributor are available to

answer questions and provide additional information

on these products and tools.

Color ToolS DuPont scientists helped develop the measurement

of color – so as a company, it’s obvious we know

how to get color right. Our knowledge goes beyond

paint to industries such as textiles, inkjet technology

and packaging – where we hold a position of

leadership.

SPECIFICATIon guIDES HElP mAkE THE moST oF DuPonT InDuSTrIAl CoATIngSEach guide is targeted on the painting needs of a

specific industry. Topics include selecting the right

paint for the job, preparing surfaces for painting,

simplified painting techniques and helpful ways to

use color. The recommendations in the Specification

Guide will help keep the customer’s assets in good

condition, make

them easy to clean

and maintain, and

provide the greatest

value for their

painting dollars.

DuPonT™ ColornET®

Users of DuPont Industrial Coatings are supported

by ColorNet®, a user-friendly software platform

designed specifically to make color formula retrieval

and reporting quick and easy. The software also

provides VOC tracking, inventory management and

offers a variety of helpful reports.

Color mATCHIngThe Acquire RXTM Spectrophotometer (M-4606)

offers fast and reliable color identification supporting

our solid colors. A reading is taken and compared

against the formulas in the color retrieval system. It

calculates the formula to create a blendable match.

Acquire RXTM Spectrophotometer

Color SeleCtor M-4407This color selector shows the

factory package colors, popular

custom mix colors, standard industrial primers and

colors, OSHA Safety Colors, and the four gloss levels

of our products – high-gloss, semi-gloss, satin-gloss

and flat.

DuPonT InDuSTrIAl CoATIngS CD All the information you need to know about

DuPont Industrial Coatings is contained in this

comprehensive CD. Information is divided into five

sections: Product, System Selector, Color, Value

Calculator and Resources. You will find valuable data

such as product data sheets, product application

guides, recommendations for product use, methods

of identifying material costs per square foot, system

recommendations by substrate and more! You can

obtain a copy of the CD by contacting your DuPont

Industrial Coatings authorized distributor.

To find a distributor in your area, visit www.industrialcoatings.dupont.com or call In the United States – 1.800.GET.DUPONTIn Canada – 1.800.668.6945


DuPont Industrial Coatings - A leading auto paint ... · PDF fileCorlar® Epoxies...

Documents

Transcript of DuPont Industrial Coatings - A leading auto paint ... · PDF fileCorlar® Epoxies...