Dual & Single Fiber DWDM OADM · DWDM Optical Add/Drop multiplexer (OADM) is a passive optical...

9
Dual & Single Fiber DWDM OADM 1 www.fs.com DUAL & SINGLE FIBER DWDM OADM Data Center & Cloud Computing Infrastructure Solutions Overview DWDM Optical Add/Drop multiplexer (OADM) is a passive optical device used in WDM networks for adding and dropping one/multiple 100 GHz DWDM channels in the C- band into one or two fibers, while letting the rest of the wavelengths bypass to the needed destination. Using the DWDM technology can add effectively WDM capability to their existing and new networks, and extend the optical signals transmission distance. DWDM OADM modules are available in single-sided (East or West) and dual-sided (East and West) configurations. With matching MUX/DEMUX units placed at each end of an optical link, multiple data channels can be combined and transmitted over a single-mode fiber trunk. The passive OADM modules can add or drop up to 4 data channels at any point along the trunk.

Transcript of Dual & Single Fiber DWDM OADM · DWDM Optical Add/Drop multiplexer (OADM) is a passive optical...

Page 1: Dual & Single Fiber DWDM OADM · DWDM Optical Add/Drop multiplexer (OADM) is a passive optical device used in WDM networks for adding and dropping one/multiple 100 GHz DWDM channels

Dual & Single Fiber DWDM OADM

1www.fs.com

DUAL & SINGLE FIBER DWDM OADM

Data Center & Cloud Computing Infrastructure Solutions

Overview

DWDM Optical Add/Drop multiplexer (OADM) is a passive

optical device used in WDM networks for adding and

dropping one/multiple 100 GHz DWDM channels in the C-

band into one or two fibers, while letting the rest of the

wavelengths bypass to the needed destination. Using the

DWDM technology can add effectively WDM capability to

their existing and new networks, and extend the optical

signals transmission distance.

DWDM OADM modules are available in single-sided (East

or West) and dual-sided (East and West) configurations.

With matching MUX/DEMUX units placed at each end of

an optical link, multiple data channels can be combined

and transmitted over a single-mode fiber trunk. The

passive OADM modules can add or drop up to 4 data

channels at any point along the trunk.

Page 2: Dual & Single Fiber DWDM OADM · DWDM Optical Add/Drop multiplexer (OADM) is a passive optical device used in WDM networks for adding and dropping one/multiple 100 GHz DWDM channels

Highlights

2www.fs.com

• Low insertion loss

• Add/drop channels at remote sites

• Protocol transparent (support 1G, 10G etc.)

• Based on thin film optics with epoxy free optical path

• Fully compliant with CE, FCC, ISO, RoHS, REACH

• Completely passive, no power or maintenance required

• Ideal for DWDM ring structures or daisy chain applications

• Various connectors are available - LC/SC/FC/ST, UPC/APC polish

• Optional monitor/1310nm port for external functions

Line Type

DUAL & SINGLE FIBER DWDM OADM

Dual fiber DWDM OADM adds and drops optical signals of same

wavelengths into two fibers, while letting the rest of the

wavelengths bypass to the needed destination. The DWDM

transceiver connected to DWDM OADM should have the same

wavelength as the client port.

Dual Fiber Single Fiber

In single fiber applications, DWDM OADM adds and drops

optical signals of different wavelengths into a fiber in the

opposite direction. It utilizes a single fiber for both adding and

dropping, which reduces overall costs, and increases the

capacity of the fiber.

Dual Fiber Single Fiber

Bidirectional Bidirectional

2 channels 2 channels

Wavelengths for Add/Drop are the same Wavelengths for Add/Drop are different

Page 3: Dual & Single Fiber DWDM OADM · DWDM Optical Add/Drop multiplexer (OADM) is a passive optical device used in WDM networks for adding and dropping one/multiple 100 GHz DWDM channels

Technical Data

3www.fs.com

Parameter Dual Fiber

Transmission Direction West and East West or East

Number of Channels 1ch 2ch 4ch 8ch 16ch 1ch 2ch

Operating Wavelength 1520nm - 1570nm

Channel Spacing 100GHz(0.8nm)

Channel Passband ±0.11nm

Insertion Loss (Add/Drop) ≤1.3dB ≤1.6dB ≤2.3dB ≤3.3dB ≤5.0dB ≤1.3dB ≤1.6dB

Insertion Loss (Pass-through) ≤1.4dB ≤1.8dB ≤2.9dB ≤4.3dB ≤8.3dB ≤1.3dB ≤1.6dB

Insertion Loss (+ 1% Mon) ≤+0.3dB

Insertion Loss (+ 1310nm port) ≤+0.3dB

Adjacent Channel Isolation ≥30dB

Non-adjacent Channel Isolation ≥35dB

Output Channel Isolation ≥20dB ≥13dB

Technology TFF

Passband Ripple ≤0.50dB

Polarization Dependent Loss ≤0.20dB

Return Loss ≥45dB

Directivity ≥50dB

Polarization Mode Dispersion ≤0.10ps

Power Handling ≤300mW

Operating Temperature -40 ~ +85°C

Storage Temperature -40 ~ +85°C

Fiber Type G657 A1

Compliance CE, FCC, ISO, RoHS, REACH

Notes:

Specified with connectors.

DUAL & SINGLE FIBER DWDM OADM

Page 4: Dual & Single Fiber DWDM OADM · DWDM Optical Add/Drop multiplexer (OADM) is a passive optical device used in WDM networks for adding and dropping one/multiple 100 GHz DWDM channels

4www.fs.com

Notes:

Specified without connectors.

DUAL & SINGLE FIBER DWDM OADM

Parameter Single Fiber

Transmission Direction West and East West or East

Number of Channels 1ch 2ch 4ch 8ch 1ch 2ch

Operating Wavelength 1520nm - 1570nm

Channel Spacing 100GHz(0.8nm)

Channel Passband ±0.11nm

Insertion Loss (Add/Drop) ≤1.6dB ≤2.3dB ≤3.3dB ≤5.0dB ≤1.6dB ≤2.2dB

Insertion Loss (Pass-through) ≤1.8dB ≤2.9dB ≤4.3dB ≤8.3dB ≤1.6dB ≤2.2dB

Insertion Loss (+ 1% Mon) ≤+0.3dB

Insertion Loss (+ 1310nm port) ≤+0.3dB

Adjacent Channel Isolation ≥30dB

Non-adjacent Channel Isolation ≥35dB

Output Channel Isolation ≥20dB ≥13dB

Technology TFF

Passband Ripple ≤0.50dB

Polarization Dependent Loss ≤0.20dB

Return Loss ≥45dB

Directivity ≥50dB

Polarization Mode Dispersion ≤0.10ps

Power Handling ≤300mW

Operating Temperature -40 ~ 85°C

Storage Temperature -40 ~ 85°C

Fiber Type G657 A1

Compliance CE, FCC, ISO, RoHS, REACH

Page 5: Dual & Single Fiber DWDM OADM · DWDM Optical Add/Drop multiplexer (OADM) is a passive optical device used in WDM networks for adding and dropping one/multiple 100 GHz DWDM channels

DUAL & SINGLE FIBER DWDM OADM

Transmission Direction

For adding/dropping DWDM channels across sites, we categorize our DWDM OADM in two groups: single-sided (East or West) and dual-

sided (East and West).

If DWDM OADM adds/drops the wavelengths in one side on fiber network, it is the East or West module; On the contrary, it is the East

and West module.

East or West

The single-sided OADM removes one channel from the network in one direction and sends it to a local interface. The remaining channels

are passed straight through to other nodes along the network.

East and West

The dual-sided OADM removes one channel from the network in one direction and sends it to a local interface in one direction. It also

allows a second local port to add the same channel back onto the network fiber in the opposite direction.

5www.fs.com

Add:C21

Drop:C21

TX: C21-C28 C22-C28 RX: C21-C28

RX: C21-C28 TX: C21-C28

C22-C28

Add:C21

Drop:C21

TX: C21-C28 C22-C28 RX: C22-C28

RX: C21-C28 TX: C22-C28

C22-C28

Add:C21

Drop:C21

Page 6: Dual & Single Fiber DWDM OADM · DWDM Optical Add/Drop multiplexer (OADM) is a passive optical device used in WDM networks for adding and dropping one/multiple 100 GHz DWDM channels

6www.fs.com

DUAL & SINGLE FIBER DWDM OADM

Special Service

Monitor Port

It is used to monitor or test the power signal, usually at a 1% ratio, 2%, 3%, 5%, etc, also available. By connecting with measurement or

monitoring equipment, such as power meters, spectrum analyzer, or FMT AIU/OPD card, the signal can be inspected without interrupting

the existing network.

1310nm Ports

The 1310nm is actually the WDM wavelength. Many optical transceivers support long-haul transmission over this wavelength. By

connecting with the same wavelength optical transceivers, this port can be used to add 1310nm wavelength into existing DWDM

networks.

PS:

DWDM Mux/Demux can't add 1550nm port due to DWDM wavelength range near 1550nm wavelength.

Page 7: Dual & Single Fiber DWDM OADM · DWDM Optical Add/Drop multiplexer (OADM) is a passive optical device used in WDM networks for adding and dropping one/multiple 100 GHz DWDM channels

7www.fs.com

DUAL & SINGLE FIBER DWDM OADM

Housing & Enclosure

FS.COM provides 4 different package options for DWDM OADM, including FMU&FUD plug-in module, ABS pigtailed module and 1U 19"

rack mount, as well as the matched chassis.

DWDM OADM Series

ID# Description

Customized DWDM OADM

#70427 Customized Dual Fiber DWDM OADM DOADM-DF

#70428 Customized Single fiber DWDM OADM, East and West DOADM-SF

#73795 Customized Single Fiber DWDM OADM, East or West DOADM-SF-EOW

Page 8: Dual & Single Fiber DWDM OADM · DWDM Optical Add/Drop multiplexer (OADM) is a passive optical device used in WDM networks for adding and dropping one/multiple 100 GHz DWDM channels

8www.fs.com

DUAL & SINGLE FIBER DWDM OADM

www.fs.com

DWDM OADM in stock

#57509 1 Channel C21 Dual Fiber DWDM OADM, East and West, LC/UPC, FMU Plug-in Module FMU-MDA0121

#575032 Channels C21-C22 Dual Fiber DWDM OADM, East and West, LC/UPC, FMU Plug-in

ModuleFMU-MDA022122

Related Products

#3348540 Channels C21-C60, with Monitor Port, 3.0dB Typical IL, LC/UPC, Dual Fiber DWDM

Mux Demux, FMU 1U Rack MountFMU-D402160M

#501178 Channels C21-C35, with Expansion Port, LC/UPC, Single Fiber DWDM Mux Demux,

Side-A, Plug-in ModuleFMU-MD08EA

#501168 Channels C22-C36, with Expansion Port, LC/UPC, Single Fiber DWDM Mux Demux,

Side-B, Plug-in ModuleFMU-MD08EB

#3650122dBm Output Booster DWDM EDFA C-band 24dB Gain, LC/UPC, Pluggable Module

for FMT Multi-Service Transport PlatformFMT22BA-EDFA

#7228420dB Gain Pre-Amplifier DWDM EDFA C-band 13dBm Output, LC/UPC,

Pluggable Module for FMT Multi-Service Transport PlatformFMT20PA-EDFA

#6578140KM DCF-based Passive Dispersion Compensation Module, 3.5dB Low Loss, LC/UPC,

Pluggable Module for FMT Multi-Service Transport PlatformFMT40-DCM

#31238Cisco C21 DWDM-SFP10G-60.61 Compatible 10G DWDM SFP+ 1560.61nm

80km DOM Transceiver ModuleDWDM-SFP10G-80

#48341Cisco C60 DWDM-SFP10G-29.55 Compatible 10G DWDM SFP+ 1529.55nm

40km DOM Transceiver ModuleDWDM-SFP10G-40

#392141U Managed Chassis Unloaded, Supports up to 4x EDFA/OEO/OLP Module

with AccessoriesFMT04-CH1U

#401911m (3ft) LC UPC to LC UPC Duplex OS2 Single Mode PVC (OFNR) 2.0mm Fiber Optic

Patch CableSM-LCU-LCU-DX-FS-1M-

PVC

FS.COM always focus on design, R&D, innovation to provide you optimal products. Any questions, welcome to contact [email protected] or [email protected].

Page 9: Dual & Single Fiber DWDM OADM · DWDM Optical Add/Drop multiplexer (OADM) is a passive optical device used in WDM networks for adding and dropping one/multiple 100 GHz DWDM channels

All statements, technical information, and recommendations related to the products here are based upon information believed to be

reliable or accurate. However, the accuracy or completeness thereof is not guaranteed, and no responsibility is assumed for any

inaccuracies. Please contact FS for more information.

Copyright © 2009-2019 FS.COM All Rights Reserved.

America

UK

GermanyChina

Singapore

Australia

https://www.fs.com

Russia