DTosi Publications
3
Daniele Tosi Publication List JOURNALS • 2011: D. Tosi, G. Perrone, “Low-cost, high-sensitivity, signal processing-enhanced fiber Bragg grating sensing system for condition-based application,” Sensor Letters, Vol 9, No. 4, pp. 1415-1422. • 2010: D. Tosi, M. Olivero, A. Vallan, G. Perrone, “Weigh-in-motion through fibre Bragg grating optical sensors,” Electronic Letters, Vol. 47, No. 17, pp. 1223-1225. • 2009: D. Tosi, M. Olivero, G. Perrone, “Dynamic strain measurement system with fiber Bragg gratings and noise mitigation techniques,” Measurement Science and Technology, Vol. 20, No. 6. • 2008: D. Tosi, M. Olivero, G. Perrone, “Low-cost fiber Bragg grating vibroacoustic sensor for voice and heartbeat detection,” Applied Optics, Vol. 47, No. 28, pp. 5123-5129. Published also on Virtual Journal of Biomedical Optics. • 2008: D. Tosi, M. Olivero, G. Perrone, “Self-mixing based interrogation techniques for high reflectivity fibre Bragg gratings,” Electronic Letters, Vol. 44, No. 6, pp. 405-406. • 2008: I. Ivascu, D. Tosi, M. Olivero, G. Perrone, N. N. Puscas, “Low-cost FBG temperature sensor for application in cultural heritage preservation,” Journal of Optoelectronics and Advanced Materials, Vol. 2, pp.196-200. • 2007: D. Tosi, M. Olivero, G. Perrone, “Broadband source-based interrogation scheme for fiber Bragg grating sensors for structural health monitoring,” Key Engineering Materials, Vol. 347, pp. 399-404. PROCEEDINGS • 2011: D. Tosi, A. Neri, G. Perrone, A. Vallan, “Low-cost optical fiber Bragg grating microphone,” IEEE Instrumentation and Measurement Technology Conference (I2MTC), Binjiang, China. • 2011: A. Braglia, A. Neri, G. Perrone, D. Tosi, A. Vallan, “Indirect evaluation of active fiber parameters from the measurement of fiber laser threshold,” submitted to IEEE Instrumentation and Measurement Technology Conference (I2MTC), Binjiang, China. • 2011: D. Tosi, M. Olivero, G. Perrone, A. Vallan, “High-speed, high-resolution fiber Bragg grating sensing system for monitoring of weigh-in-motion devices,” Proc. SPIE, Vol. 7753.
-
Upload
daniele-tosi -
Category
Documents
-
view
29 -
download
0
description
Daniele Tosi - Publication ListUpdated 10/2011
Transcript of DTosi Publications
Daniele Tosi
Publication List
JOURNALS
• 2011: D. Tosi, G. Perrone, “Low-cost, high-sensitivity, signal
processing-enhanced fiber Bragg grating sensing system for condition-based application,” Sensor Letters, Vol 9, No. 4, pp. 1415-1422.
• 2010: D. Tosi, M. Olivero, A. Vallan, G. Perrone, “Weigh-in-motion through fibre Bragg grating optical sensors,” Electronic Letters, Vol. 47, No. 17, pp. 1223-1225.
• 2009: D. Tosi, M. Olivero, G. Perrone, “Dynamic strain measurement system with fiber Bragg gratings and noise mitigation techniques,” Measurement Science and Technology, Vol. 20, No. 6.
• 2008: D. Tosi, M. Olivero, G. Perrone, “Low-cost fiber Bragg grating vibroacoustic sensor for voice and heartbeat detection,” Applied Optics, Vol. 47, No. 28, pp. 5123-5129. Published also on Virtual Journal of Biomedical Optics.
• 2008: D. Tosi, M. Olivero, G. Perrone, “Self-mixing based interrogation techniques for high reflectivity fibre Bragg gratings,” Electronic Letters, Vol. 44, No. 6, pp. 405-406.
• 2008: I. Ivascu, D. Tosi, M. Olivero, G. Perrone, N. N. Puscas, “Low-cost FBG temperature sensor for application in cultural heritage preservation,” Journal of Optoelectronics and Advanced Materials, Vol. 2, pp.196-200.
• 2007: D. Tosi, M. Olivero, G. Perrone, “Broadband source-based interrogation scheme for fiber Bragg grating sensors for structural health monitoring,” Key Engineering Materials, Vol. 347, pp. 399-404.
PROCEEDINGS
• 2011: D. Tosi, A. Neri, G. Perrone, A. Vallan, “Low-cost optical fiber Bragg grating microphone,” IEEE Instrumentation and Measurement Technology Conference (I2MTC), Binjiang, China.
• 2011: A. Braglia, A. Neri, G. Perrone, D. Tosi, A. Vallan, “Indirect evaluation of active fiber parameters from the measurement of fiber laser threshold,” submitted to IEEE Instrumentation and Measurement Technology Conference (I2MTC), Binjiang, China.
• 2011: D. Tosi, M. Olivero, G. Perrone, A. Vallan, “High-speed, high-resolution fiber Bragg grating sensing system for monitoring of weigh-in-motion devices,” Proc. SPIE, Vol. 7753.
• 2011: D. Tosi, M. Olivero, G. Perrone, A. Vallan, “Fiber Bragg grating microphone system for condition-based maintenance of industrial facilities,” Proc. SPIE, Vol. 7753.
• 2011: D. Tosi, A. Neri, G. Perrone, A. Vallan, “Low-cost, non-contact displacement sensor based on plastic fiber bundle,” Proc. SPIE, Vol. 7753.
• 2010: A. Braglia, A. Carullo, F. Ferraris, A. Neri, M. Olivero, R. Orta, M. Parvis, G. Perrone, D. Tosi, A. Vallan, “Characterization of components for high power fiber lasers,” (in Italian) Group of Electric and Electronic Measurement (GMEE) meeting, Roma, Italy.
• 2009: D. Tosi, M. Olivero, G. Perrone, A. Vallan, L. Arcudi, “Simple fiber Bragg grating ensing systems for structural health monitoring,” IEEE Workshop on Environmental, Energy, and Structural Monitoring Systems (EESMS), pp. 80-86, Crema, Italy.
• 2009: D. Tosi, M. Olivero, G. Perrone, A. Vallan, “Improved fibre Bragg grating interrogation for dynamic strain measurement,” German Branch of the European Optical Society Meeting, Brescia, Italy.
• 2009: M. L. Casalicchio, A. Neri, G. Perrone, D. Tosi, A. Vallan, “Non-contact low-cost fiber distance sensor with compensation of target reflectivity,” IEEE Instrumentation and Measurement Technology Conference (I2MTC), pp. 1671-1675, Singapore.
• 2008: D. Tosi, M. Olivero, G. Perrone, “Optical microphone with fiber Bragg grating and signal processing techniques,” 8th International Conference on Vibration Measurement by Laser Techniques, Proc. SPIE, Vol. 7098, Ancona, Italy.
• 2008: D. Tosi, M. Olivero, G. Perrone, “Low-cost fiber Bragg grating-based static and dynamic strain system for structural monitoring,” 8th International Conference on Vibration Measurement by Laser Techniques, Proc. SPIE, Vol. 7098, Ancona, Italy.
• 2008: D. Tosi, M. Olivero, G. Perrone, “Realization of a fiber Bragg grating sensor for static and dynamic strain measurement,” (in Italian) Electro-Optics Conference, Milano, Italy.
• 2008: D. Tosi, M. Olivero, G. Perrone, “Fiber Bragg grating optical detector of mechanical and acoustic vibrations,” (in Italian) Electro-Optics Conference, Milano, Italy.
• 2008: D. Tosi, M. Olivero, G. Perrone, “Optical microphone through fiber Bragg gratings,” (in Italian) Electro-Optics Conference, Milano, Italy.
• 2008: D. Tosi, M. Olivero, G. Perrone, “Interrogation of highly reflective fiber Bragg gratings through self-mixing,” (in Italian) Electro-Optics Conference, Milano, Italy.
• 2007: D. Tosi, M. Olivero, G. Perrone, “Broadband source-based interrogation scheme for fiber Bragg grating sensors for structural health monitoring,” Damage Assessment 2007 (DAMAS07), Torino, Italy.
OTHER
• 2011: D. Tosi, “Power monitor for fiber laser applications”, white paper, Fiberlogix.
• 2008: D. Tosi, M. Olivero, G. Perrone, “Fiber Bragg grating optical detector of mechanical and acoustic vibrations,” National Instruments NIDays08, Roma, Italy.
• 2008: D. Tosi, M. Olivero, G. Perrone, “Fiber Bragg grating temperature sensors,” National Instruments NIDays08, Roma, Italy.
• 2007: D. Tosi, M. Olivero, G. Perrone, “Static and dynamic characterization of fiber Bragg gratings using a LabVIEW platform,” National Instruments NIDays07, Milano, Italy.
• 2007: D. Tosi, M. Olivero, G. Perrone, “Automatic LabVIEW-controlled setup for inscription of fiber Bragg gratings,” National Instruments NIDays07, Milano, Italy.
• 2007: D. Andreola, F. Poldoro, D. Tosi, A. Zurlo, A., “Italian High Speed Railway Lines: the Impact,” Alta Scuola Politecnica Book of Projects 2008.
