DTL Book

http://www.sterlingdobrasil.com.br

MiniBlox 8-bit Monitoring SDI to

Analogue Video Converters

DTL MiniBlox™

4410 SDI to composite analogue DAC

Description The 4410 is a monitoring quality 270Mb/s SDI to composite analogue converter. The analogue output is configurable to different types of PAL and NTSC via switches on the end of the unit. These switches also control the output of a built in test pattern. It is housed in an extremely compact and rugged aluminium case ideally suited to both studio and portable applications.

Features • SDI to composite analogue DAC

• Multi-standard output

• 270Mb/s 525/625 SDI input

• 10-bit DAC

• Built in colour bar generator

• Compact and rugged design

• Locking connector for PSU

Control switches • PAL/NTSC output standard

• Test pattern control

www.miniblox.com Specifications

SDI input Performance Standards SMPTE 259M 270Mb/s 525/625 SDI Differential gain <0.3% Connector 75Ω BNC Differential phase <0.5º Signal level 800mV p-p ±10% Delay <10nS Return loss >18dB up to 270MHz Input 8-bit 4:2:2 Cable equalisation Automatic up to 100m (Belden 8281) Quantization 10-bit DAC Analogue output Power Standards PAL (B,D,G,H,I,N or M), NTSC USA or Japan Voltage 6-12V DC Connector 75Ω BNC Current 350mA at 6V Signal level 1Vp-p ±10% Power connector Locking 2.5mm jack connector (centre +ve) DC offset ±100mV Other Test pattern 75% colour bars (SDI input required) LED Shows signal presence Temperature range 0˚C to 40˚C Dimensions 63.5mm x 84mm x 30mm (excluding connectors) Weight 145g

Ordering information 4410 SDI to composite analogue DAC 4006 Desktop power supply with IEC320 C14 inlet 4010 1U rack mounting frame for up to 5 units including PSU

We reserve the right to change technical specifications without prior notice. E&OE.

DTL Broadcast Ltd, Johnson’s Estate, Silverdale Road, Hayes, Middlesex, UB3 3BA, UK. Phone: +44 (0) 20 8813 5200 Fax: +44 (0) 20 8813 5022 Internet: www.dtl-broadcast.com Email: [email protected]

F:\PRODUCTS\MiniBlox\Data Sheets\4410 SDI to composite analogue DAC Iss2.2.doc

DTL MiniBlox™

4411 SDI to component analogue DAC

Description The 4411 is a monitoring quality 270Mb/s SDI to component analogue converter. Dip switches on the end of the unit select the input standard, output format and the addition of pedestal. In addition the final switch controls output of the built in colour bars test pattern. It is housed in an extremely compact and rugged aluminium case ideally suited to both studio and portable applications.

Features • SDI to component analogue DAC

• Component YUV & RGB output

• 270Mb/s 525/625 operation


• 10-bit DAC

• Pedestal control




Control switches

• YUV/RGB output control

• 525/625 output control


SDI input Performance Standards SMPTE 259M 270Mb/s 525/625 SDI Differential gain <0.3% Connector 75Ω BNC Differential phase <0.5º Signal level 800mV p-p ±10% Delay <10nS Return loss >18dB up to 270MHz Input 8-bit 4:2:2 Cable equalisation Automatic up to 100m (Belden 8281) Quantization 10-bit DAC Analogue output Power Standards 525/625 component YUV and RGB Voltage 6-12V DC Connector 75Ω BNC Current 350mA at 6V Signal level 1Vp-p ±10% Power connector Locking 2.5mm jack connector (centre +ve) DC offset ±100mV Other Test pattern 75% colour bars (SDI input required) LED Shows signal presence Temperature range 0˚C to 40˚C Dimensions 63.5mm x 84mm x 30mm (excluding connectors) Weight 175g

Ordering information 4411 SDI to component analogue DAC 4006 Desktop power supply with IEC320 C14 inlet 4010 1U rack mounting frame for up to 5 units including PSU



F:\PRODUCTS\MiniBlox\Data Sheets\4411 SDI to component analogue DAC Iss2.2.doc

DTL MiniBlox™

4412 SDI to universal analogue DAC

Description The 4412 is a monitoring quality 270Mb/s SDI to universal analogue converter. The analogue output is set to YUV & composite (CVBS), RGB & CVBS, RGBS, or YC & CVBS via switches on the end of the unit. These switches also control the output of a built in colour bars test pattern. It is housed in an extremely compact and rugged aluminium case ideally suited to both studio and portable applications.

Features • SDI to universal analogue DAC

• Composite, component YUV, RGB(S) &

YC outputs

• 270Mb/s 525/625 operation

• 10-bit DAC




Control switches • PAL/NTSC 625/525 standard

• Composite/YUV/RGB/RGBS or YC output

• Test pattern output


SDI input Performance Standards SMPTE 259M 270Mb/s 525/625 SDI Frequency response Flat to 5.5MHz, -3dB at ≈ 6MHz Connector 75Ω BNC Differential gain <0.3% Signal level 800mV p-p ±10% Differential phase <0.5º Return loss >18dB to 270MHz Delay <10nS Cable equalisation Up to 100m automatic (Belden 8281) Input 8-bit 4:2:2 Analogue output Quantization 10-bit DAC Standards PAL (B, D, G, H, I), PAL M, NTSC USA & Japan Power Format Composite, YUV, RGB(S) & YC Voltage 6-12V DC Connector 75Ω BNC Current 350mA at 6V Signal level 1Vp-p ±10% Power connector Locking 2.5mm jack connector (centre +ve) DC offset ±100mV Other Return loss 36dB to 5MHz LED Shows power and signal presence Test pattern 75% colour bars (SDI input required) Temperature range 0˚C to 40˚C Dimensions 63.5mm x 84mm x 30mm (excluding connectors) Weight 180g

Ordering information 4412 SDI to universal analogue DAC 4006 Desktop power supply with IEC320 C14 inlet 4010 1U rack mounting frame for up to 5 units including PSU



\\Dtl-server\company\PRODUCTS\MiniBlox\Data Sheets\4412 SDI to universal analogue DAC Iss2.2.doc

MiniBlox 10-bit Broadcast SDI to

Analogue Video Converters

DTL MiniBlox™

4420 SDI to composite analogue 10-bit DAC

Description The 4420 is a full featured broadcast quality 270Mb/s SDI to composite analogue converter. It is housed in an extremely compact and rugged aluminium case ideally suited to both studio and portable applications. The analogue output is configurable to four different types of PAL and NTSC via switches on the end of the unit. These switches also control the output of two built in test patterns and the control of vertical blanking information.

Features • SDI to composite analogue DAC • Multi-standard output • 270Mb/s 525/625 operation • 4x over-sampling • 10-bit DAC • VBI control • Built in colour bar generator • Built in blackburst generator • Locking connector for PSU

Control switches • PAL/NTSC standard • Test pattern enable • Blackburst • Colour bars • VBI blanking control


SDI input Performance Standards SMPTE 259M 270Mb/s 525/625 SDI Frequency response Flat to 5.5MHz, -3dB at ≈ 6MHz Connector 75Ω BNC Differential gain <0.3% Signal level 800mV p-p ±10% Differential phase <0.5º Return loss >20dB to 270MHz Delay <10nS Cable equalisation Up to 100m automatic (Belden 8281) Input 10-bit 4:2:2 Analogue output Quantisation 10-bit DAC Standards PAL (B, D, G, H, I), PAL M, NTSC USA & Japan Voltage 6-12V DC Connector 75Ω BNC Current 350mA at 6V Signal level 1Vp-p ±10% Power connector Locking 2.5mm jack connector (centre +ve) DC offset ±100mV Other Return loss >36dB to 5.5MHz LED Shows signal presence Test pattern 75% colour bars (SDI input required) Temperature range 0˚C to 40˚C Blackburst output Blackburst timing reference signal Dimensions 63.5mm x 84mm x 30mm (excluding connectors) Weight 200g

Ordering information 4420 SDI to composite analogue DAC 4006 Desktop power supply with IEC320 C14 inlet 4010 1U rack mounting frame for up to 5 units including PSU

We reserve the right to change technical specifications without prior notice. E&OE. DTL Broadcast Ltd, Johnson’s Estate, Silverdale Road, Hayes, Middlesex, UB3 3BA, UK.

Phone: +44 (0) 20 8813 5200 Fax: +44 (0) 20 8813 5022 Internet: www.dtl-broadcast.com Email: [email protected] \\Dtl-server\company\PRODUCTS\MiniBlox\Data Sheets\4420 SDI to composite analogue 10-bit DAC Iss2.3.doc

DTL MiniBlox™

4421 SDI to component analogue 10-bit DAC

Description The 4421 is a fully featured broadcast quality 270Mb/s SDI to component analogue converter. Dip switches on the end of the unit control the input standard, the output format, vertical blanking, addition of pedestal and the YUV output level. In addition the final switch controls the output of the built in colour bars test pattern. It is housed in an extremely compact and rugged aluminium case ideally suited to both studio and portable applications.

Features • SDI to component analogue DAC • Component YUV& RGB output • SMPTE/EBU or Beta levels • 270Mb/s 525/625 operation • 4x over-sampling • 10-bit DAC • VBI control • Pedestal control • Built in colour bar generator • Compact and rugged design • Locking connector for PSU

Control switches • YUV/RGB output • 525/625 line • Pedestal • Output levels • Test pattern enable • VBI blanking control


SDI input Performance Standards SMPTE 259M 270Mb/s 525/625 SDI Frequency response Flat to 5.5MHz, -3dB at ≈ 6MHz Connector 75Ω BNC Differential gain <0.3% Signal level 800mV p-p ±10% (terminated) Differential phase <0.5º Return loss >20dB up to 270MHz Delay <10ns Cable equalisation Up to 100m automatic (Belden 8281) Input 10-bit 4:2:2 Quantisation 10-bit DAC Analogue outputs Power Standards 525/625 component YUV and RGB Voltage 6-12V DC Component SMPTE/EBU or Beta levels Current 350mA at 6V Connectors Three 75Ω BNCs Power connector Locking 2.5mm jack connector (centre +ve) Signal level 1Vp-p ±10% Other DC offset ±100mV LED Shows signal presence Return loss >36dB to 5.5MHz Temperature range 0˚C to 40˚C Cable drive Up to 800m (Belden 8281) Dimensions 63.5mm x 84mm x 30mm (excluding connectors) Test pattern 75% colour bars (SDI input required) Weight 200g

Ordering information 4421 SDI to component analogue DAC 4006 Desktop power supply with IEC320 C14 inlet 4010 1U rack mounting frame for up to 5 units including PSU



\\Dtl-server\company\PRODUCTS\MiniBlox\Data Sheets\4421 SDI to component analogue 10-bit DAC Iss2.3.doc

DTL MiniBlox™

4422 SDI to universal analogue 10-bit DAC

Description The 4422 is a full featured broadcast quality 270Mb/s SDI to universal analogue converter. The analogue output is selectable to YUV & composite (CVBS), RGB & CVBS, RGBS, or YC & CVBS via switches on the end of the unit. These switches also control the output of a built in test pattern. It is housed in an extremely compact and rugged aluminium case ideally suited to both studio and portable applications.

Features • SDI to universal analogue DAC • Composite, component, RGB(S) & YC

outputs • SMPTE/EBU or Beta levels • 270Mb/s 525/625 operation • 4x over-sampling • 10-bit DAC • Built in colour bar generator • Compact and rugged design • Locking connector for PSU

Control switches • CVBS/YUV/RGB(S)/YC outputs • PAL/NTSC 525/625 selection • Test pattern enable • Component output levels

www.miniblox.comSpecifications

SDI input Performance Standards SMPTE 259M 270Mb/s 525/625 SDI Frequency response Flat to 5.5MHz, -3dB at ≈ 6MHz Connector 75Ω BNC Differential gain <0.3% Signal level 800mV p-p ±10% Differential phase <0.5º Return loss >20dB up to 270MHz Delay <10ns Cable equalisation Up to 100m automatic (Belden 8281) Input 10-bit 4:2:2 Analogue outputs Quantisation 10-bit DAC Standards PAL (B, D, G, H, I), PAL M, NTSC USA & Japan Power Format Composite/YUV/RGB(S)/ & YC Voltage 6-12V DC Component SMPTE/EBU, or Beta component levels Current 350mA at 6V Connectors Four 75Ω BNCs Power connector Locking 2.5mm jack connector (centre +ve) Signal level 1Vp-p ±10% Other DC offset ±100mV LED Shows signal presence Return loss >36dB to 5.5MHz Temperature range 0˚C to 40˚C Cable drive Up to 800m (Belden 8281) Dimensions 63.5mm x 84mm x 30mm (excluding connectors) Test pattern 75% colour bars (SDI input required) Weight 200g

Ordering information 4422 SDI to universal analogue DAC 4006 Desktop power supply with IEC320 C14 inlet 4010 1U rack mounting frame for up to 5 units including PSU


Phone: +44 (0) 20 8813 5200 Fax: +44 (0) 20 8813 5022 Internet: www.dtl-broadcast.com Email: [email protected]

\\Dtl-server\company\PRODUCTS\MiniBlox\Data Sheets\4422 SDI to universal analogue 10-bit DAC Iss2.3.doc

http://www.miniblox.com/

DTL MiniBlox™

4424 SDI to composite analogue 10-bit DAC

Description The 4424 is a broadcast quality 270Mb/s SDI to composite analogue converter. It has a re-clocked SDI output. PAL or NTSC is automatically detected. Switches on the end of the unit control the output of the built in test patterns and blanking of the vertical blanking information. It is housed in an extremely compact and rugged aluminium case ideally suited to both studio and portable applications.

Features • SDI to composite analogue DAC • Automatic 270Mb/s 525/625 detection • 4x over-sampling • 10-bit DAC • VBI control • Automatic input cable equalisation to

over 350m • Re-clocked SDI output • Built in colour bar & blackburst

generator (requires an SDI input) • Compact and rugged design • Locking connector for PSU

Control switches • Test pattern selection • Vertical interval blanking control • PAL N or NTSC Japan selection


SDI input Return loss >36dB to 5.5MHz Standards SMPTE 259M 270Mb/s 525/625 SDI Cable drive Up to 800m (Belden 8281) Connector 75Ω BNC Test patterns Colour bars and blackburst (SDI input required) Signal level 800mV p-p ±10% Frequency response Flat to 5.5MHz, -3dB at ≈ 6MHz Return loss >15dB up to 270MHz Differential gain <0.3% Cable equalisation >350m automatic (Belden 8281) Differential phase <0.5º Re-clocked SDI output Delay <10ns Standards SMPTE 259M 270Mb/s 525/625 SDI Input 10-bit 4:2:2 Connector 75Ω BNC Quantization 10-bit DAC Signal level 800mV p-p ±10% Power Return loss >15dB up to 270MHz Voltage 6-12V DC Analogue output Current 300mA at 6V Standards PAL (B, D, G, H, I), PAL N, NTSC USA & Japan Power connector Locking 2.5mm jack connector (centre +ve) Format Composite Other Connectors 75Ω BNC LED Shows power & signal presence Signal level 1Vp-p ±10% Temperature range 0˚C to 40˚C DC offset ±100mV Dimensions 63.5mm x 84mm x 30mm (excluding connectors) Weight 245g

Ordering information 4424 SDI to composite analogue DAC 4006 Desktop power supply with IEC320 C14 inlet 4010 IU rack mounting frame for up to 5 units (includes power supply)


Phone: +44 (0) 20 8813 5200 Fax: +44 (0) 20 8813 5022 Internet: www.dtl-broadcast.com Email: [email protected] \\Dtlserver\products\MiniBlox\Data Sheets\4424 SDI to composite analogue 10-bit DAC Iss1.2.doc


DTL MiniBlox™

4425 SDI to component analogue 10-bit DAC

Description

The 4425 is a broadcast quality 270Mb/s SDI to component analogue converter. It has a re-clocked SDI output. 625 or 525 line SDI is automatically detected. Switches on the end of the unit select YUV or RGB output, SMPTE/EBU or Beta component levels, pedestal, colour bar output and blanking of the vertical blanking information. It is housed in an extremely compact and rugged aluminium case ideally suited to both studio and portable applications.

Features • SDI to component analogue DAC • Component or RGB outputs • SMPTE/EBU or Beta component levels • Automatic 270Mb/s 525/625 detection • 4x over-sampling • 10-bit DAC • VBI control • Automatic input cable equalisation to

over 350m • Re-clocked SDI output • Built in colour bar generator • Compact and rugged design • Locking connector for PSU

Control switches • YUV or RGB outputs • Pedestal • Colour bar enable • Component output levels • Vertical interval blanking control


SDI input Return loss >36dB to 5.5MHz Standards SMPTE 259M 270Mb/s 525/625 SDI Cable drive Up to 800m (Belden 8281) Connector 75Ω BNC Test pattern Colour bars (SDI input required) Signal level 800mV p-p ±10% Frequency response Flat to 5.5MHz, -3dB at ≈ 6MHz Return loss >15dB up to 270MHz Differential gain <0.3% Cable equalisation >350m automatic (Belden 8281) Differential phase <0.5º Re-clocked SDI output Delay <10ns Standards SMPTE 259M 270Mb/s 525/625 SDI Input 10-bit 4:2:2 Connector 75Ω BNC Quantisation 10-bit DAC Signal level 800mV p-p ±10% Power Return loss >15dB up to 270MHz Voltage 6-12V DC Analogue outputs Current 400mA at 6V Format Component YUV or RGB Power connector Locking 2.5mm jack connector (centre +ve) Component SMPTE/EBU or Beta component levels Other Connectors 75Ω BNCs LED Shows power & signal presence Signal level 1Vp-p ±10% Temperature range 0˚C to 40˚C DC offset ±100mV Dimensions 63.5mm x 84mm x 30mm (excluding connectors) Weight 250g

Ordering information 4425 SDI to component analogue 10-bit DAC 4006 Desktop power supply with IEC320 C14 inlet 4010 IU rack mounting frame for up to 5 units (includes power supply)


Phone: +44 (0) 20 8813 5200 Fax: +44 (0) 20 8813 5022 Internet: www.dtl-broadcast.com Email: [email protected] \\Dtlserver\products\MiniBlox\Data Sheets\4425 SDI to component analogue 10-bit DAC Iss1.2.doc


DTL MiniBlox™

4426 SDI to universal analogue 10-bit DAC

Description

The 4426 is a broadcast quality 270Mb/s SDI to universal analogue converter. It has a re-clocked SDI output. 625 or 525 line SDI is automatically detected. Switches on the end of the unit select composite, component YUV/RGB or YC output; SMPTE/EBU or Beta component levels, pedestal, colour bar output and blanking of the vertical blanking information. It is housed in an extremely compact and rugged aluminium case ideally suited to both studio and portable applications.

Features • SDI to universal analogue DAC • Composite, component, RGB or YC

outputs • SMPTE/EBU or Beta component

levels • Automatic 270Mb/s 525/625 detection • 4x over-sampling • 10-bit DAC • Automatic input cable equalisation to

over 350m • Re-clocked SDI output • Built in colour bar generator (requires

an SDI input) • VBI control • Compact and rugged design • Locking connector for PSU

Control switches • CVBS/YUV/RGB or YC output • Test pattern enable • Component output levels • Vertical interval blanking control • PAL N or NTSC Japan selection


SDI input Return loss >36dB to 5.5MHz Standards SMPTE 259M 270Mb/s 525/625 SDI Cable drive Up to 800m (Belden 8281) Connector 75Ω BNC Test pattern Colour bars (SDI input required) Signal level 800mV p-p ±10% Frequency response Flat to 5.5MHz, -3dB at ≈ 6MHz Return loss >20dB up to 270MHz Differential gain <0.3% Cable equalisation Up to 250m automatic (Belden 8281) Differential phase <0.5º Re-clocked SDI output Delay <10ns Standards SMPTE 259M 270Mb/s 525/625 SDI Input 10-bit 4:2:2 Connector 75Ω BNC Quantization 10-bit DAC Signal level 800mV p-p ±10% Power Return loss >15dB up to 270MHz Voltage 6-12V DC Analogue outputs Current 350mA at 6V Standards PAL (B, D, G, H, I), PAL N, NTSC USA & Japan Power connector Locking 2.5mm jack connector (centre +ve) Format Composite/YUV/RGB or YC Other Component SMPTE/EBU, or Beta component levels LED Shows power & signal presence Connectors Four 75Ω BNCs Temperature range 0˚C to 40˚C Signal level 1Vp-p ±10% Dimensions 63.5mm x 84mm x 30mm (excluding connectors) DC offset ±100mV Weight 255g

Ordering information 4426 SDI to universal analogue DAC 4006 Desktop power supply with IEC320 C14 inlet 4010 IU rack mounting frame for up to 5 units (includes power supply)

Preliminary data. We reserve the right to change technical specifications without prior notice. E&OE. DTL Broadcast Ltd, Johnson’s Estate, Silverdale Road, Hayes, Middlesex, UB3 3BA, UK.

Phone: +44 (0) 20 8813 5200 Fax: +44 (0) 20 8813 5022 Internet: www.dtl-broadcast.com Email: [email protected] \\Dtlserver\products\MiniBlox\Data Sheets\4426 SDI to universal analogue 10-bit DAC Iss1.2.doc


DTL MiniBlox™

4464A SDI to analogue composite video & audio DAC

Description

The 4464A SDI to analogue composite video & audio DAC extracts two balanced stereo audio pairs from any group in the ancillary data space of a 270Mb/s SDI signal and provides broadcast quality composite video and analogue audio outputs. Analogue audio outputs are converted by a 24 bit DAC (sampled at 20 or 24 bits dependant on embedded audio format). De-embedding conforms to SMPTE 272M and allows audio to be extracted from any of the four groups. Composite video is converted using a 10-bit DAC with 4x over-sampling. Anti-aliasing filters and precision DC restoration provide the kind of conversion previously only available in rack mount systems. The unit is housed in an extremely compact and rugged aluminium case and is suitable for both field and studio applications.

Features • Extracts two balanced analogue audio

stereo pairs from any group • High quality 24 bit audio DAC • Automatic detection of 525/625 SDI • 20 or 24 bit de-embedding • Adjustable full scale output levels to

meet all international standards • LEDs show group status and input

signal presence • Automatic input cable equalisation to

over 350m • 10-bit video DAC with 4x over-

sampling • Compact and rugged design • Locking connector for PSU

Control switches • Audio group select • Output level adjustment • PAL N or NTSC Japan selection


SDI input Analogue audio output Standards SMPTE 259M 270Mb/s 525/625 SDI Standard Balanced analogue audio Connector 75Ω BNC Number 2 stereo pairs Signal level 800mV p-p ±10% (terminated) Impedance <50Ω Return loss >15dB to 270MHz Output level Max 0dBFS=+24dBu/ Min 0dBFS=+8.5dBu Cable equalisation > 350m automatic (Belden 8281) Maximum level +24dBu into 10kΩ Analogue video output Connector Removable screw terminals Standards PAL (B, D, G, H, I), PAL N, NTSC USA & Japan Power Format Composite Voltage 6-12V DC Connectors 75Ω BNC Current 810mA at 6V Signal level 1Vp-p ±10% Power connector Locking 2.5mm jack connector (centre +ve) DC offset ±50mV Other Return loss >36dB to 5.5MHz LEDs Show group status and signal presence Audio de-embedding Temperature range 0˚C to 40˚C Standards SMPTE 272M Dimensions 63.5mm x 84mm x 30mm (excluding connectors) Extracts 20 or 24 bits Weight 185g

Ordering information 4464A SDI to analogue composite video & audio DAC 4006 Desktop power supply with IEC320 C14 inlet 4010 1U rack mounting frame for up to 5 units including PSU

Preliminary data sheet. We reserve the right to change technical specifications without prior notice. E&OE. DTL Broadcast Ltd, Johnson’s Estate, Silverdale Road, Hayes, Middlesex, UB3 3BA, UK.

Phone: +44 (0) 20 8813 5200 Fax: +44 (0) 20 8813 5022 Internet: www.dtl-broadcast.com Email: [email protected] \\Dtl-server\company\PRODUCTS\MiniBlox\Data Sheets\4464A SDI to analogue composite video & audio DAC Iss1.1.doc

MiniBlox Broadcast Analogue to

Digital Video Converters

DTL MiniBlox™

4430 Composite analogue to SDI ADC

Description

The 4430 is a broadcast quality composite analogue to SDI converter. It uses a 10 bit 2x over sampling ADC with four line adaptive comb filtering. It is housed in an extremely compact and rugged aluminium case ideally suited to both studio and portable applications. The unit accepts and automatically selects between different types PAL, NTSC and SECAM composite inputs. Input quality is automatically detected between VCR / CCTV and broadcast sources.

Features • Composite analogue to SDI ADC

• Auto select multi-standard input – PAL, NTSC & SECAM

• Two 270Mb/s 525/625 outputs

• Dual high-speed over sampling 10-bit A/D converters

• 4 line adaptive comb filter

• Handles a wide range of video input qualities

• Automatic gain control



Control switches • Pedestal control

• VBI blanking control


Analogue input Performance Standards Composite PAL, NTSC & SECAM Differential gain <0.4% Connector 75Ω BNC Differential phase <1.5o

Signal level 1V p-p ±10% Delay <10nS Return loss >40dB to 5.5MHz Quantization 10-bit SDI outputs Power Standards SMPTE 259M 270Mb/s 525/625 Voltage 6-12V DC Connector 75Ω BNC Current 350mA at 6V Number 2 Power connector Locking 2.5mm jack connector (centre +ve) Signal level 800mVp-p ±10% Other Return loss >20dB to 270MHz LED Shows power and signal presence Temperature range 0˚C to 40˚C Dimensions 63.5mm x 84mm x 30mm (excluding connectors) Weight 150g

Ordering information 4430 Composite analogue to SDI ADC 4006 Desktop power supply with IEC320 C14 inlet 4010 IU rack mounting frame for up to 5 units



\\Dtl-server\company\PRODUCTS\MiniBlox\Data Sheets\4430 Composite analogue to SDI ADC Iss3.2.doc

DTL MiniBlox™

4430+ Composite analogue to SDI ADC

Description The 4430+ is a broadcast quality composite analogue to SDI converter. It uses dual 11 bit over sampling ADCs with 5 line adaptive comb filtering. Temporal noise reduction and 3D motion adaptive YC separation offer the highest quality conversion on the market. The unit accepts PAL, NTSC and SECAM analogue inputs. The input format is automatically detected. It is housed in an extremely compact and rugged aluminium case ideally suited to both studio and portable applications.

Features • Analogue composite to SDI ADC • Dual high speed oversampling 11-bit ADC’s• Digital TBC and jitter filter for greater

output stability • Temporal frame recursive noise reduction • Motion adaptive 3D YC separation using a 5

line comb filter • Automatic gain control • Differential input to eliminate common

mode ‘hum’ up to 6Vp-p • Extremely compact and rugged • Locking connector for PSU

Control switches • Pedestal control • VBI blanking • Disable AGC • Disable jitter filter • Enable noise reduction • Enable motion adaptive YC separation


Analogue input Performance Standards Composite NTSC (J, M, 4.43), PAL (B, D, G, H, I,

M, N, Nc, 60) and SECAM (B, D, G, K, K1, L) Differential gain <1.5%

Composite PAL, NTSC & SECAM Differential phase <0.4° Connector 75Ω BNCs Power Signal level 1V p-p nominal Voltage 6-12V DC Return loss >40dB to 5.5MHz Current 600mA at 6V CMR >6Vp-p Power connector Locking 2.5mm jack connector (centre +ve) SDI output Other Standards SMPTE 259M 270Mb/s 525/625 SDI LED Shows power and signal Connector 75Ω BNC Temperature range 0˚C to 40˚C Number 2 Dimensions 63.5mm x84mm x30mm (excluding connectors) Signal level 800mV p-p ±10% (terminated) Weight 180g Jitter <0.15UI with colour bars input Return loss >18dB to 270MHz

Ordering information 4430+ Composite analogue to SDI ADC 4006 Desktop power supply with IEC320 C14 inlet 4010 1U rack mounting frame for up to 5 units including PSU


Phone: +44 (0) 20 8813 5200 Fax: +44 (0) 20 8813 5022 Internet: www.dtl-broadcast.com Email: [email protected] \\Dtl-server\company\PRODUCTS\MiniBlox\Data Sheets\4430+ Composite analogue to SDI ADC Iss1.1.doc

DTL MiniBlox™

4431 Component analogue to SDI ADC

Description

The 4431 is a broadcast quality component analogue to SDI 10-bit ADC. It is housed in an extremely compact and rugged aluminium case ideally suited to both studio and portable applications. The unit accepts, and automatically selects between, component analogue 525 / 625 line inputs at different levels.

Features • Component analogue to SDI ADC

• Two 270Mb/s 525/625 outputs

• Dual high-speed over sampling 10-bit A/D converters

• Automatically selects between 525 and 625 lines

• VBI control

• Automatic gain control



Control switches • Pedestal control

• VBI blanking control


Analogue inputs Performance Standards Component 525 or 625 Differential gain <0.4% Connectors Three 75Ω BNCs Differential phase <1.5o

Signal level 1V p-p ±10% Delay <10ns Return loss >40dB to 5.5MHz Quantization 10- bit SDI outputs Power Standards SMPTE 259M 270Mb/s 525/625 Voltage 6-12V DC Connector 75Ω BNC Current 400mA at 6V Number 2 Power connector Locking 2.5mm jack connector (centre +ve) Signal level 800mVp-p ±10% Other Return loss >20dB to 270MHz LED Shows signal presence Temperature range 0˚C to 40˚C Dimensions 63.5mm x 84mm x 30mm (excluding connectors) Weight 180g

Ordering information 4431 Component analogue to SDI ADC 4006 Desktop power supply with IEC320 C14 inlet 4010 1U rack mounting frame for up to 5 units including PSU



F:\PRODUCTS\MiniBlox\Data Sheets\4431 Component analogue to SDI ADC Iss3.1.doc

DTL MiniBlox™

4432 Universal analogue to SDI ADC

Description The 4432 is a broadcast quality universal analogue to SDI converter. It uses a 10 bit 2x over sampling ADC with 4 line adaptive comb filtering. It is housed in an extremely compact and rugged aluminium case ideally suited to both studio and portable applications. The unit accepts composite, component or YC analogue inputs. It automatically selects different types PAL, NTSC and SECAM. Switches on the end of the unit select between component, YC & composite inputs and set the pedestal and control VBI blanking.

Features • Universal analogue to SDI ADC • Composite, YC or component YUV input • Two SDI 270Mb/s 525/625 outputs • Dual high-speed over sampling 10-bit A/D

converters • 4 line adaptive comb filter • Auto select multi-standard input – PAL,

NTSC & SECAM • Handles a wide range of video input

qualities • Automatic gain control • Compact and rugged design • Locking connector for PSU

Control switches • Select between component, YC & composite

inputs • Pedestal control • VBI blanking control


Analogue input Performance Standards Composite, YC & YUV component 525 or 625 Differential gain <0.4% Composite PAL, NTSC & SECAM Differential phase <1.5o

Connectors Three 75Ω BNCs Delay <10ns Signal level 1V p-p ±10% Quantization 10-bit Return loss >40dB to 5.5MHz Power SDI outputs Voltage 6-12V DC Standards SMPTE 259M 270Mb/s 525/625 Current 250mA at 6V Connector 75Ω BNC Power connector Locking 2.5mm jack connector (centre +ve) Number 2 Other Signal level 800mVp-p ±10% LED Shows power and signal Return loss >20dB to 270MHz Temperature range 0˚C to 40˚C Dimensions 63.5mm x 84mm x 30mm (excluding connectors) Weight 180g

Ordering information 4432 Universal analogue to SDI ADC 4010 1U rack mounting frame for up to 5 units including PSU



F:\PRODUCTS\MiniBlox\Data Sheets\4432 Universal analogue to SDI ADC Iss3.1.doc

DTL MiniBlox™

4432+ Universal analogue to SDI ADC

Description The 4432+ is a broadcast quality universal analogue to SDI converter. It uses dual 11 bit over sampling ADC’s with 5 line adaptive comb filtering. Temporal noise reduction and 3D motion adaptive YC separation offer the highest quality conversion on the market. The unit accepts composite, YUV, RGB or YC analogue inputs. It automatically selects different types of PAL, NTSC and SECAM. The unit is housed in an extremely compact and rugged aluminium case and is suitable for both field and studio applications.

Features • Universal analogue to SDI ADC • Dual high speed oversampling 11-bit ADC’s• Digital TBC and jitter filter for greater

output stability • Temporal frame recursive noise reduction • Motion adaptive 3D YC separation using a 5

line comb filter • Automatic gain control • Differential inputs to eliminate common

mode ‘hum’ up to 6Vp-p • Extremely compact and rugged

Control switches • Pedestal control • VBI blanking • Disable AGC • Disable jitter filter • Enable noise reduction • Enable motion adaptive YC separation


Analogue input Performance Standards Composite, YC, RGB & YUV component 525 or 625 Differential gain <1.5% Composite PAL, NTSC & SECAM Differential phase <0.4º Connectors Three 75Ω BNCs Power Signal level 1V p-p nominal Voltage 6-12V DC Return loss >40dB to 5.5MHz Current 600mA at 6V CMR >6Vp-p Power connector Locking 2.5mm jack connector (centre +ve) SDI output Other Standards SMPTE 259M 270Mb/s 525/625 SDI LED Shows power and signal Connector 75Ω BNC Temperature range 0˚C to 40˚C Number 2 Dimensions 63.5mm x84mm x30mm (excluding connectors) Signal level 800mV p-p ±10% (terminated) Weight 185g Jitter <0.15UI with colour bars input Return loss >18dB to 270MHz

Ordering information 4432+ Universal analogue to SDI ADC 4006 Desktop power supply with IEC320 C14 inlet 4010 1U rack mounting frame for up to 5 units including PSU


Phone: +44 (0) 20 8813 5200 Fax: +44 (0) 20 8813 5022 Internet: www.dtl-broadcast.com Email: [email protected] \\Dtl-server\company\PRODUCTS\MiniBlox\Data Sheets\4432+ Universal analogue to SDI ADC Iss1.1.doc

DTL MiniBlox™

4463A Composite video & analogue audio to SDI with embedded audio ADC

Description The 4463 composite analogue to SDI analogue audio embedder is a complete digital embedding solution for users wishing to use their existing analogue audio and video equipment. Two balanced stereo audio pairs can be embedded into the ancillary data space of a 270Mb/s output SDI stream. The broadcast quality composite video to SDI conversion uses two 11 bit ADCs with x4 oversampling and with five line adaptive comb filtering. A jitter filter and digital time base corrector compensate for unstable input signals. The analogue audio input is sampled at 24 bits and can be embedded as 20 or 24 bit audio. Embedding conforms to SMPTE 272M and allows audio to be inserted into any of the four groups. Adjustable full scale input levels to meet all international standards. The unit is housed in an extremely compact and rugged aluminium case and is suitable for both field and studio applications.

Features • Converts analogue composite video to

SDI and inserts two balanced analogue audio stereo pairs into any group

• Auto select multi-standard input of PAL, NTSC & SECAM

• Two 11 bit 4x oversampled video ADCs with 5 line adaptive comb filtering

• Automatic video gain control range from -3dB to 6dB

• Jitter filter and digital TBC for unstable input signals

• High quality 24 bit audio ADC • Selectable 20 or 24 bit embedding • Adjustable full scale input levels to meet

all international standards • LEDs show group status and input signal

presence • Extremely compact and rugged

Control switches • Audio group select • 20/24 bit embedding • Audio input level adjustment • Pedestal control • Disable AGC • Disable jitter filter


Analogue video input Number 2 stereo pairs Standards Composite PAL, NTSC & SECAM Impedance 20KΩ Connector 75Ω BNC Input level Max 0dBFS=+26dBu/ Min 0dBFS=+12dBu Signal level 1V p-p +100%, -50% Quantisation 24 bit Return loss >40dB to 5.5MHz Connector Removable screw terminals Video conversion Power Differential gain <1.6% Voltage 6-12V DC Differential phase <0.5° Current 450mA at 6V Quantisation 10 bit Power connector Locking 2.5mm jack connector (centre +ve) SDI output Audio embedding Standards SMPTE 259M 270Mb/s 525/625 SDI Standards SMPTE 272M Connector 75Ω BNC Embedding 20 or 24 bits Signal level 800mV p-p ±10% (terminated) Other Jitter <0.15UI with colour bars input LEDs Show group status and signal presence Return loss >18dB to 270MHz Temperature range 0˚C to 40˚C Analogue audio input Dimensions 63.5mm x84mm x30mm (excluding connectors) Standard Balanced analogue Weight 175g

Ordering information 4463A Composite video & analogue audio to SDI ADC 4006 Desktop power supply with IEC320 C14 inlet 4010 1U rack mounting frame for up to 5 units including PSU


Phone: +44 (0) 20 8813 5200 Fax: +44 (0) 20 8813 5022 Internet: www.dtl-broadcast.com Email: [email protected] \\Dtl-server\company\PRODUCTS\MiniBlox\Data Sheets\4463A analogue composite video analogue audio embedder Iss3.1.doc

MiniBlox Digital and Analogue

Audio Embedders

DTL MiniBlox™

4461A SDI analogue audio embedder

Description The 4461A SDI analogue audio embedder inserts two balanced stereo audio pairs into the ancillary data space of a 270Mb/s SDI signal. The analogue input is sampled at 24 bits and can be embedded as 20 or 24 bit audio. Embedding conforms to SMPTE 272M and allows audio to be inserted into any of the four groups. Existing audio groups can be added to or completely removed. Digital silence is inserted when an audio feed is absent. There is automatic input cable equalisation and a re-clocked SDI output is provided. The unit is housed in an extremely compact and rugged aluminium case and is suitable for both field and studio applications.

Features • Inserts two balanced analogue

audio stereo pairs into any group • High quality 24 bit audio ADC • Replaces or adds to existing audio• Automatic detection of 525/625

SDI • Selectable 20 or 24 bit embedding • Adjustable full scale input levels

to meet all international standards • LEDs show group status and

input signal presence • Automatic input cable

equalisation to over 350m • EDH generation • Extremely compact and rugged

Control switches • Audio group select • Append or overwrite audio • 20/24 bit embedding • Input level adjustment • Pass/generate EDH


SDI input Analogue audio input Standards SMPTE 259M 270Mb/s 525/625 SDI Standard Balanced analogue audio Connector 75Ω BNC Number 2 stereo pairs Signal level 800mV p-p ±10% (terminated) Impedance 20kΩ Return loss >15dB to 270MHz Input level Max 0dBFS=+26dBu/ Min 0dBFS=+12dBu Cable equalisation > 350m automatic (Belden 8281) Quantisation 24 bit SDI output Connector Removable screw terminals Standards SMPTE 259M 270Mb/s 525/625 SDI Power Connector 75Ω BNC Voltage 6-12V DC Signal level 800mV p-p ±10% (terminated) Current 470mA at 6V DC offset ±100mV Power connector Locking 2.5mm jack connector Return loss >18dB to 270MHz Other Audio embedding LEDs Locking 2.5mm jack connector (centre +ve) Standards SMPTE 272M Temperature range 0˚C to 40˚C Embedding 20 or 24 bits Dimensions 63.5mm x 84mm x 30mm (excluding

connectors) Weight 175g

Ordering information 4461A SDI analogue audio embedder 4006 Desktop power supply with IEC320 C14 inlet 4010 1U rack mounting frame for up to 5 units including PSU


Phone: +44 (0) 20 8813 5200 Fax: +44 (0) 20 8813 5022 Internet: www.dtl-broadcast.com Email: [email protected] \\Dtl-server\company\PRODUCTS\MiniBlox\Data Sheets\4461A SDI analogue audio embedder Iss2.1.doc

DTL MiniBlox™

4461DB SDI balanced AES-EBU audio embedder

Description The 4461DB SDI balanced AES-EBU audio embedder inserts two balanced stereo AES-EBU streams into the ancillary data space of a 270Mb SDI signal. The input stream can be embedded as 20 or 24 bit audio. Embedding conforms to SMPTE 272M and allows audio to be inserted into any of the four groups. Existing audio groups can be added to or completely removed. The audio must be synchronous with the video. There is automatic input cable equalisation and a re-clocked SDI output is provided. The unit is housed in an extremely compact and rugged aluminium case and is suitable for both field and studio applications.

Features • Inserts two synchronous balanced AES-

EBU stereo pairs into any group

• Replaces or adds to existing audio

• Automatic detection of 525/625 SDI

• Selectable 20 or 24 bit embedding

• LEDs show group status and input signal presence

• Automatic input cable equalisation to over 350m

• EDH generation • Extremely compact and rugged design • Locking connector for PSU

Control switches • Audio group select

• Append or overwrite audio

• 20 or 24 bit embedding

• Pass/generate EDH


SDI input AES-EBU input Standards SMPTE 259M 270Mb/s 525/625 SDI Standard Synchronous balanced AES-EBU AES3-2003 Connector 75Ω BNC Number 2 Signal level 800mV p-p ±10% (terminated) Type Transformer coupled Return loss >15dB to 270MHz Termination Balanced 110Ω Cable equalisation > 350m automatic (Belden 8281) Input level 0.2-10V p-p SDI output Connector Removable screw terminals Standards SMPTE 259M 270Mb/s 525/625 SDI Sample rate 48kHz (synchronised to video) Connector 75Ω BNC Power Signal level 800mV p-p ±10% (terminated) Voltage 6-12V DC DC offset ±100mV Current 440mA at 6V Return loss >18dB to 270MHz Power connector Locking 2.5mm jack connector (centre +ve) Audio embedding Other Standard SMPTE 272M LEDs Show power, signal presence & embedding status Resolution 20 or 24 bits Temperature range 0˚C to 40˚C Dimensions 63.5mm x84mm x30mm (excluding connectors) Weight 175g

Ordering information 4462DB SDI balanced AES-EBU audio embedder 4006 Desktop power supply with IEC320 C14 inlet 4010 1U rack mounting frame for up to 5 units including PSU



\\Dtl-server\company\PRODUCTS\MiniBlox\Data Sheets\4461DB SDI balanced AES-EBU audio embedder Iss2.2.doc


DTL MiniBlox™

4461DB+ SDI balanced AES-EBU audio embedder with SRC

Description The 4461DB+ SDI balanced AES-EBU audio embedder with sample rate converter inserts two balanced stereo AES-EBU streams into the ancillary data space of a 270Mb SDI signal. The input stream can be embedded as 20 or 24 bit audio. Internal audio sample rate converters allow the applied audio to be of any sample rate between 32 and 96kHz. The sample rate conversion maybe bypassed to allow for non-PCM audio streams Embedding conforms to SMPTE 272M and allows audio to be inserted into any of the four groups. Existing audio groups can be added to or completely removed. There is automatic input cable equalisation and a re-clocked SDI output is provided. The unit is housed in an extremely compact and rugged aluminium case and is suitable for both field and studio applications.

Features • Inserts two asynchronous balanced AES-

EBU stereo pairs into any group • Supports all audio sample rates from

32kHz to 96kHz • Inserts digital silence when audio signals

are not present • Replaces or adds to existing audio • Automatic detection of 525/625 SDI • Selectable 20 or 24 bit embedding • LEDs show group status and input signal

presence • Automatic input cable equalisation to

over 350m • EDH generation • Re-clocked SDI output • Extremely compact and rugged design • Locking connector for PSU

Control switches • Audio group select • Channel status update/pass • Append or overwrite audio • 20 or 24 bit embedding • Pass/generate EDH • Disable sample rate converter


SDI input Termination Balanced 110Ω Standards SMPTE 259M 270Mb/s 525/625 SDI Input level 0.2-10V p-p Connector 75Ω BNC Connector Removable screw terminals Signal level 800mV p-p ±10% (terminated) Sample rate 48kHz synchronous or 32 – 96kHz asynchronous Return loss >15dB to 270MHz Audio embedding Cable equalisation > 350m automatic (Belden 8281) Standard SMPTE 272M SDI output Resolution 20 or 24 bits Standards SMPTE 259M 270Mb/s 525/625 SDI Power Connector 75Ω BNC Voltage 6-12V DC Signal level 800mV p-p ±10% (terminated) Current 440mA at 6V DC offset ±100mV Power connector Locking 2.5mm jack connector (centre +ve) Return loss >18dB to 270MHz Other AES-EBU input LEDs Show power, signal presence & embedding status Standard Balanced AES-EBU AES3-2003 Temperature range 0˚C to 40˚C Number 2 Dimensions 63.5mm x84mm x30mm (excluding connectors) Type Transformer coupled Weight 175g

Ordering information 4462DB+ SDI balanced AES-EBU audio embedder with SRC 4006 Desktop power supply with IEC320 C14 inlet 4010 1U rack mounting frame for up to 5 units including PSU



\\Dtl-server\company\PRODUCTS\MiniBlox\Data Sheets\4461DB+ SDI balanced AES-EBU audio embedder with SRC Iss1.1.doc


DTL MiniBlox™

4461DU SDI unbalanced AES-EBU audio embedder

Description The 4461DU SDI unbalanced AES-EBU audio embedder inserts two unbalanced stereo AES-EBU streams into the ancillary data space of a 270Mb/s SDI signal. The input stream can be embedded as 20 or 24 bit audio. Embedding conforms to SMPTE 272M and allows audio to be inserted into any of the four groups. The audio must be synchronous with the video. Existing audio groups can be added to or completely removed. There is automatic input cable equalisation and a re-clocked SDI output is provided. The unit is housed in an extremely compact and rugged aluminium case and is suitable for both field and studio applications.

Features • Inserts two synchronous unbalanced

AES-EBU stereo pairs into any group • Replaces or adds to existing audio • Automatic detection of 525/625 SDI • Selectable 20 or 24 bit embedding • LEDs show group status and input signal


over 350m • EDH generation • Extremely compact and rugged design • Locking connector for PSU


• Append or overwrite audio

• 20 or 24 bit embedding

• Pass/generate EDH


SDI input AES-EBU input Standards SMPTE 259M 270Mb/s 525/625 SDI Standard Unbalanced AES-EBU AES3id , SMPTE 276M Connector 75Ω BNC Number 2 Signal level 800mV p-p ±10% (terminated) Type Transformer coupled Return loss >15dB to 270MHz Connector 75Ω BNC Cable equalisation > 350m automatic (Belden 8281) Termination Unbalanced 75Ω SDI output Level 0.2–10V p-p Standards SMPTE 259M 270Mb/s 525/625 SDI Sample rate 48kHz (synchronised to video) Connector 75Ω BNC Power Signal level 800mV p-p ±10% (terminated) Voltage 6-12V DC DC offset ±100mV Current 440mA at 6V Return loss >18dB to 270MHz Power connector Locking 2.5mm jack connector (centre +ve) Audio embedding Other Standards SMPTE 272M LEDs Show power, signal presence & embedding status Resolution 20 or 24 bits Temperature range 0˚C to 40˚C Dimensions 63.5mm x84mm x30mm (excluding connectors) Weight 175g

Ordering information 4462DU SDI unbalanced AES-EBU audio embedder 4006 Desktop power supply with IEC320 C14 inlet 4010 1U rack mounting frame for up to 5 units including PSU



\\Dtl-server\company\PRODUCTS\MiniBlox\Data Sheets\4461DU SDI unbalanced AES-EBU audio embedder Iss2.2.doc


DTL MiniBlox™

4461DU+ SDI unbalanced AES-EBU audio embedder with SRC

Description The 4461DU+ SDI unbalanced AES-EBU audio embedder with sample rate converter inserts two unbalanced stereo AES-EBU streams into the ancillary data space of a 270Mb/s SDI signal. The input stream can be embedded as 20 or 24 bit audio. Internal audio sample rate converters allow the applied audio to be of any sample rate between 32 and 96kHz. The sample rate conversion maybe bypassed to allow for non-PCM audio streams. Embedding conforms to SMPTE 272M and allows audio to be inserted into any of the four groups. Existing audio groups can be added to or completely removed. There is automatic input cable equalisation and a re-clocked SDI output is provided. The unit is housed in an extremely compact and rugged aluminium case and is suitable for both field and studio applications.

Features • Inserts two asynchronous unbalanced

AES-EBU stereo pairs into any group • Supports all audio sample rates from

32kHz to 96kHz • Inserts digital silence when audio signals

are not present • Replaces or adds to existing audio • Automatic detection of 525/625 SDI • Selectable 20 or 24 bit embedding • LEDs show group status and input signal


over 350m • EDH generation • Re-clocked SDI output • Extremely compact and rugged design • Locking connector for PSU

Control switches • Audio group select • Channel status update/pass • Append or overwrite audio • 20 or 24 bit embedding • Pass/generate EDH • Disable sample rate converter


SDI input Connector 75Ω BNC Standards SMPTE 259M 270Mb/s 525/625 SDI Termination Unbalanced 75Ω Connector 75Ω BNC Level 0.32-10V p-p Signal level 800mV p-p ±10% (terminated) Sample rate 48kHz synchronous or 32 – 96kHz asynchronous Return loss >15dB to 270MHz Audio embedding Cable equalisation > 350m automatic (Belden 8281) Standards SMPTE 272M SDI output Resolution 20 or 24 bits Standards SMPTE 259M 270Mb/s 525/625 SDI Power Connector 75Ω BNC Voltage 6-12V DC Signal level 800mV p-p ±10% (terminated) Current 440mA at 6V DC offset ±100mV Power connector Locking 2.5mm jack connector (centre +ve) Return loss >18dB to 270MHz Other AES-EBU input LEDs Show power, signal presence & embedding status Standard Unbalanced AES-EBU AES3id , SMPTE 276M Temperature range 0˚C to 40˚C Number 2 Dimensions 63.5mm x84mm x30mm (excluding connectors) Type Transformer coupled Weight 175g

Ordering information 4461DU+ SDI unbalanced AES-EBU audio embedder with SRC 4006 Desktop power supply with IEC320 C14 inlet 4010 1U rack mounting frame for up to 5 units including PSU



\\Dtl-server\company\PRODUCTS\MiniBlox\Data Sheets\4461DU+ SDI unbalanced AES-EBU audio embedder with SRC Iss1.2.doc


MiniBlox Digital and Analogue

Audio De-embedders

DTL MiniBlox™

4462DB SDI balanced AES-EBU audio de-embedder

Description The 4462DB SDI balanced AES-EBU audio de-embedder extracts two digital stereo audio streams from any group in the ancillary data space of a 270Mb SDI stream. De-embedding conforms to SMPTE 272M and allows audio to be extracted from any of the four groups. There is automatic cable equalisation and a re-clocked SDI output is provided. The unit is housed in an extremely compact and rugged aluminium case and is suitable for both field and studio applications.

Features • Extracts two balanced AES-EBU

streams from any group • Automatic detection of 525/625 SDI • 20 or 24 bit de-embedding • LEDs show group status and input

signal presence • Automatic input cable equalisation

to over 350m • Re-clocked SDI output • Extremely compact and rugged



SDI input AES-EBU outputs Standards SMPTE 259M 270Mb/s 525/625 SDI Standard Balanced AES-EBU AES3-2003 Connector 75Ω BNC Number 2 Signal level 800mV p-p ±10% (terminated) Type Transformer coupled Return loss >15dB to 270MHz Termination Balanced 110Ω Cable equalisation > 350m automatic (Belden 8281) Output level 3.5V p-p ±5% SDI output Sample rate 48kHz (synchronised to video) Standards SMPTE 259M 270Mb/s 525/625 SDI Connector Removable screw terminals Connector 75Ω BNC Power Signal level 800mV p-p ±10% (terminated) Voltage 6-12V DC DC offset ±100mV Current 520mA at 6V Return loss >18dB to 270MHz Power connector Locking 2.5mm jack connector (centre +ve) Audio de-embedding Other Standards SMPTE 272M LEDs Show power, signal presence & de-embedding status Resolution 20 or 24 bits Temperature range 0˚C to 40˚C Dimensions 63.5mm x 84mm x 30mm (excluding connectors) Weight 175g

Ordering information 4462DB SDI balanced AES-EBU audio de-embedder 4006 Desktop power supply with IEC320 C14 inlet 4010 1U rack mounting frame for up to 5 units including PSU


Phone: +44 (0) 20 8813 5200 Fax: +44 (0) 20 8813 5022 Internet: www.dtl-broadcast.com Email: [email protected] \\Dtl-server\company\PRODUCTS\MiniBlox\Data Sheets\4462DB SDI balanced AES-EBU audio de-embedder Iss2.2.doc


DTL MiniBlox™

4462DU SDI unbalanced AES-EBU audio de-embedder

Description The 4462DU SDI unbalanced AES-EBU audio de-embedder extracts two unbalanced digital stereo audio streams from any group in the ancillary data space of a 270Mb SDI stream. De-embedding conforms to SMPTE 272M and allows audio to be extracted from any of the four groups. There is automatic input cable equalisation and a re-clocked SDI output is provided. The unit is housed in an extremely compact and rugged aluminium case and is suitable for both field and studio applications.

Features • Extracts two unbalanced AES-EBU

streams from any group • Automatic detection of 525/625 SDI • 20 or 24 bit de-embedding • LEDs show group status and input

signal presence • Automatic input cable equalisation to

over 350m • Re-clocked SDI output • Extremely compact and rugged



SDI input AES-EBU output Standards SMPTE 259M 270Mb/s 525/625 SDI Standard Unbalanced AES-EBU AES3id , SMPTE 276M Connector 75Ω BNC Number 2 Signal level 800mV p-p ±10% (terminated) Sample rate 48kHz (synchronised to video) Return loss >15dB to 270MHz Type Transformer coupled Cable equalisation > 350m automatic (Belden 8281) Connector 75Ω BNC SDI output Termination Unbalanced 75Ω Standards SMPTE 259M 270Mb/s 525/625 SDI Level 1.5V p-p ± 5% Connector 75Ω BNC Connector 75Ω BNC Signal level 800mV p-p ±10% (terminated) Power DC offset ±100mV Voltage 6-12V DC Return loss >18dB to 270MHz Current 520mA at 6V Audio de-embedding Power connector Locking 2.5mm jack connector (centre +ve) Standards SMPTE 272M Other Resolution 20 or 24 bits LEDs Show power, signal presence & de-embedding status Temperature range 0˚C to 40˚C Dimensions 63.5mm x 84mm x 30mm (excluding connectors) Weight 175g

Ordering information 4462DU SDI unbalanced AES-EBU audio de-embedder 4006 Desktop power supply with IEC320 C14 inlet 4010 1U rack mounting frame for up to 5 units including PSU


Phone: +44 (0) 20 8813 5200 Fax: +44 (0) 20 8813 5022 Internet: www.dtl-broadcast.com Email: [email protected] \\Dtl-server\company\PRODUCTS\MiniBlox\Data Sheets\4462DU SDI unbalanced AES-EBU audio de-embedder Iss2.1.doc


MiniBlox HD and SDI

Distribution Amplifiers

SDI OUT 5

SDI OUT 6

SDI IN SDI OUT 3

SDI OUT 4 EQUALISATION

OU

TPU

T D

RIV

ERS

RE-CLOCKING

LED SDI OUT 1

SDI OUT 2

DTL MiniBlox™

4206 1x6 3G-HD-SD re-clocking distribution amplifier

Description The 4206 digital video distribution amplifier is an extremely compact and rugged unit that operates with all SDI standards from 270Mbit to 3GHz. Also supports DVB-ASI at 270Mb/s .It has automatic input cable equalisation and provides 6 re-clocked outputs. An LED shows when power and a valid signal are present. The unit requires an external power supply or a rack mounting frame. A 1RU frame is available which takes up to 5 units and a 2U one that takes up to 14.

Key features Automatic 3G, HD, or SD SDI or DVB-ASI at 270Mb/s standard detection

Automatic input cable equalisation 6 re-clocked outputs (when DVB-ASI 3 are inverted) LED shows power and valid input signal presence

Locking connector for power input Compact and rugged design

Optional external power supply Optional rack mounting frames with central power supplies

www.miniblox.com

DTL Broadcast Ltd, Johnson’s Estate, Silverdale Road, Hayes, Middlesex, UB3 3BA, UK. Phone: +44 (0) 20 8813 5200 Fax: +44 (0) 20 8813 5022 www.dtl-broadcast.com Email: [email protected]

DS-4206 Iss1.1

Specifications Video input 3G SMPTE 424M & 425M-AB (2.97 &

2.967Gb/s) 1080p50/59.94/60

HD SMPTE 292M (1.485 & 1.435Gb/s) 1080i 60/59.94/50 1080p/psf 30/29.97/25/24/23.98 720p 60/59.94/50/30/29.97/25/24/23.98

SD SMPTE 259M-C (270Mb/s) 625i 50 525i 59.94

ASI DVB-ASI at 270Mb/s Number 1 Connector 75Ω BNC Return loss >15dB to 1.5GHz

>10dB 3GHz Cable equalisation

3G to 100m, HD to 160m, SD to 250m (Belden 1694A)

Video outputs Standards As input Format As input Number 6 (when DVB-ASI 3 are inverted) Connectors 75Ω BNCs Jitter <0.2ui peak-to-peak Return loss >15dB to 1.5GHz

>10dB 1.5 to 2.97GHz Electrical Voltage 6-12VDC Power <1.5W Connector Locking 2.5mm jack (centre +ve) Safety EN60950 Other LED Power and valid input presence Size (mm) 63.5 x 84 x 30 plus connectors Weight 175g Temperature 5˚C to 40˚C Humidity 80% max (non condensing)

Options 4006 Desktop power supply with IEC inlet 4010 1U rack mounting frame for up to 5 units

including PSU 4020 2U rack mounting frame for up to 14

units & single or dual PSUs 4021 Power supply for 4020 2U frame

SDI OUT 5

SDI OUT 6

SDI IN / HD SDI OUT 3

SDI OUT 4 EQUALISATION

OU

TP

UT

DR

IVE

RS

LED SDI OUT 1

SDI OUT 2

SDI / HD Switch Select

DTL MiniBlox ™

4204 1x4 3G-HD-SD non-reclocking distribution amplifier

Description

The 4204 digital video distribution amplifier is an extremely compact and rugged unit that operates with all SDI standards from 270Mbit to 3G. It also supports DVB-ASI two outputs .It has automatic input cable equalisation and provides 4 non- reclocked outputs. An LED shows when power and a valid signal are present. The unit requires an external power supply or a rack mounting frame. A 1RU frame is available which takes up to 5 units and a 2U one that takes up to 14.

Key features Non-reclocking for cost sensitive application

Cable equalisation with switch select for HD or SDI 4 none re-clocked outputs (when DVB-ASI 3 are inverted)

LED shows power and valid input signal presence Locking connector for power input

Compact and rugged design Optional external power supply

Optional rack mounting frames with central power supplies

www.miniblox.com

MiniBlox

HD and SDI

Audio Embedders

SDI OUT 1

SDI OUT 2 SDI IN

ANALOGUE AUDIO 1 LEFT

EQUALISATION & RE-CLOCKING

ANALOGUE AUDIO 1 RIGHT

SERIALISER OUTPUT DRIVER DESERIALISER SDI SDI

INSERT EMBEDDED

AUDIO

24-BIT AUDIO ADC

MICRO CONTROLLER

DIP SWITCHES

LEDS



DTL MiniBlox™

4261A 3G-HD-SD dual stereo analogue audio embedder

Description The 4261A 3G-HD-SD analogue audio embedder inserts two balanced stereo analogue audio pairs into any group in the ancillary data space of an SDI signal. The unit automatically detects whether the SDI input is 3G, HD or 270Mb/s SD SDI. Audio conversion employs high quality 24-bit DACs. Adjustable full scale input levels meet all international standards. There is automatic input cable equalisation and two re-clocked SDI outputs are provided. Units can be cascaded to enable embedding into all four available groups. The unit requires an external power supply or a rack mounting frame. A 1RU frame is available which takes up to 5 units and a 2U one that takes up to 14. Audio XLR breakout cables and external power supplies are also available.

Key features Automatic 3G, HD, or SD SDI standard detection

Inserts two balanced analogue audio stereo pairs into any group Replaces or adds to existing audio

High quality 24 bit audio ADC Adjustable full scale input levels to meet all international standards

LEDs show group status and input signal presence Automatic input cable equalisation

2 re-clocked SDI outputs Compact and rugged design

Optional XLR breakout cable Optional external power supply


www.miniblox.com


DS-4261A Iss1.0


2.967Gb/s) 1080p50/59.94/60


SD SMPTE 259M-C (270Mb/s) 625i 50 525i 59.94

Number 1 Connector 75Ω BNC Return loss >15dB to 1.485GHz

>10dB 1.5 to 2.97GHz Cable equalisation

3G 140m, HD 230m, SD 250m (Belden 1694A)

Video outputs Standards As input Format As input Number 2 Connectors 75Ω BNCs Jitter <0.20ui peak-to-peak Return loss >15dB to 1.485GHz

>10dB 1.5 to 2.97GHz Embedding Standards SMPTE 299M & 272M-C Audio inputs Inputs Balanced analogue audio Number 2 stereo pairs Connector Female 15pin sub-D (optional XLR

breakout cable) Impedance >20kΩ Input level Adjustable 0dBFS = +12 to +26dBu Maximum level

+24dBu

Quantisation 24 bit Noise floor <-90dB (A weighted) Distortion <0.002% (20Hz-20KHz) Frequency response

+/-0.2dB (20Hz-20KHz)

Crosstalk <-90dB (20Hz-20KHz)

Electrical Voltage 6-12VDC Power <3W Connector Locking 2.5mm jack (centre +ve) Safety EN60950 Control Setup 6 way dip switch LEDs Power, input presence & group status Other Size (mm) 63.5 x 84 x 30 plus connectors Weight 175g Temperature 5˚C to 40˚C Humidity 80% max (non condensing)

Options 5CA15SD-X05 Audio cable HD15M to 4F XLRs 4006 Desktop power supply with IEC inlet 4010 1U rack mounting frame for up to 5 units



SDI OUT 1

SDI OUT 2

AES AUDIO 1

AES AUDIO 2

AES AUDIO 3

AES AUDIO 4

EQUALISATION & RE-CLOCKING SERIALISER OUTPUT

DRIVER DESERIALISER SDI SDI INSERT

EMBEDDED AUDIO

MICRO CONTROLLER

LOCAL CONTROL SWITCH

DISPLAY LED

SAMPLE RATE CONVERTER

CONTROL

SDI IN

DTL MiniBlox™

4261D 3G-HD-SD quad AES audio embedder

Description

The 4261D 3G-HD-SD quad AES audio embedder inserts four balanced AES audio streams (8 audio channels) into the ancillary data space of an SDI signal. Audio can be inserted into any two embedded audio groups. AES inputs can be sample rate converted to a 48kHz rate synchronised to the video. Conversion may be bypassed for compatibility with Dolby® streams. Two units can be cascaded to enable embedding into all four available groups (16 audio channels). The unit automatically detects whether the SDI input is 3G, HD or 270Mb/s SD SDI. There is automatic input cable equalisation and two re-clocked SDI outputs are provided. The unit requires an external power supply or a rack mounting frame. A 1RU frame is available which takes up to 5 units and a 2U one that takes up to 14. XLR audio breakout cables and external power supplies are also available. Adaptors are available to convert unbalanced audio inputs on BNCs to balanced ones on XLRs.


Inserts four balanced AES audio streams into any two groups Internal sample rate converters for 48kHz AES synchronous with video input

LEDs show group status and input signal presence Automatic input cable equalisation

2 re-clocked SDI outputs Compact and rugged design

Optional XLR breakout cable (BNC to XLR adaptors available for unbalanced AES inputs) Optional external power supply


www.miniblox.com


DS-4261D Iss1.0


2.967Gb/s) 1080p50/59.94/60


SD SMPTE 259M-C (270Mb/s) 625i 50 525i 59.94



3G 140m, HD 230m, SD 250m (Belden 1694A)


>10dB 1.5 to 2.97GHz Embedding Standards SMPTE 299M & 272M-C Audio inputs Inputs Balanced AES Number 4 Connector Female 15pin sub-D (optional XLR

breakout cable) Type Transformer coupled Sample rate 32-96kHz Sample rate conversion

AES converted to 48kHz synchronous with video (selected by dipswitch)

Standard AES3 Impedance 110Ω Input level 3.5v p-p ±5% Breakout cable (optional)

4 female XLRs

Electrical Voltage 6-12VDC Power <3W Connector Locking 2.5mm jack (centre +ve) Safety EN60950 Control Setup 6 way dipswitch LEDs Power, input presence & group status Other Size (mm) 63.5 x 84 x 30 plus connectors Weight 175g Temperature 5˚C to 40˚C Humidity 80% max (non condensing)

Options 5CA15SD-X05 Audio cable HD15M to 4F XLRs 4006 Desktop power supply with IEC inlet NADITBNC-F Female XLR to BNC adaptor for

unbalanced AES input 4010 1U rack mounting frame for up to 5 units



MiniBlox

HD and SDI

Audio De-embedders

SDI OUT 1

SDI OUT 2 SDI IN





EXTRACT EMBEDDED

AUDIO

24-BIT AUDIO DAC

MICRO CONTROLLER

DIP SWITCHES

LEDS



DTL MiniBlox™

4262A 3G-HD-SD dual stereo analogue audio de-embedder

Description The 4262A 3G-HD-SD dual stereo analogue audio de-embedder extracts two balanced stereo analogue audio pairs from any group in the ancillary data space of an SDI signal and provides broadcast quality analogue audio outputs. Audio conversion employs high quality 24-bit DACs. Adjustable full scale output levels meet all international standards. Units can be cascaded to enable de-embedding from all four available groups (16 audio channels). The unit automatically detects whether the SDI input is 3G, HD or 270Mb/s SD SDI. There is automatic input cable equalisation and two re-clocked SDI outputs are provided. The unit requires an external power supply or a rack mounting frame. A 1RU frame is available which takes up to 5 units and a 2U one that takes up to 14. Audio XLR breakout cables and external power supplies are also available.


Extracts two balanced analogue audio stereo pairs from any group High quality 24 bit audio DAC

Adjustable full scale output levels to meet all international standards LEDs show group status and input signal presence

Automatic input cable equalisation 2 re-clocked SDI outputs

Locking connector for power supply Compact and rugged design

Optional XLR breakout cable Optional external power supply


www.miniblox.com


DS-4262A Iss1.1


2.967Gb/s) 1080p50/59.94/60


SD SMPTE 259M-C (270Mb/s) 625i 50 525i 59.94





>10dB 1.5 to 2.97GHz De-embedding Standards SMPTE 299M & 272M-C Audio outputs Outputs Balanced analogue audio Number 2 stereo pairs Connector Female 15pin sub-D (optional XLR

breakout cable) Impedance <50Ω Output level Adjustable 0dBFS = +12 to +24dBu Quantisation 24 bit Maximum level +24dBu into 10kΩ


Options 5CA15SD-X00 Audio cable HDD15 to 4M XLRs 4006 Desktop power supply with IEC inlet 4010 1U rack mounting frame for up to 5 units



SDI OUT 1

SDI OUT 2 SDI IN

AES AUDIO 1


AES AUDIO 2


EXTRACT EMBEDDED

AUDIO

AUDIO OUTPUT DRIVERS

MICRO CONTROLLER

DIP SWITCHES

LEDS

AES AUDIO 3

AES AUDIO 4

DTL MiniBlox™

4262D 3G-HD-SD quad AES audio de-embedder

Description The 4262D 3G-HD-SD quad AES audio de-embedder extracts four AES audio streams (8 audio channels) from the ancillary data space of an SDI signal and provides broadcast quality balanced AES audio outputs. Audio can be extracted from any two embedded audio groups. Two units can be cascaded to enable de-embedding from all four available groups (16 audio channels). The unit automatically detects whether the SDI input is 3G, HD or 270Mb/s SD SDI. There is automatic input cable equalisation and two re-clocked SDI outputs are provided. The unit requires an external power supply or a rack mounting frame. A 1RU frame is available which takes up to 5 units and a 2U one that takes up to 14. XLR audio breakout cables and external power supplies are also available.


Extracts four balanced AES audio streams from any two groups LEDs show group status and input signal presence

Automatic input cable equalisation 2 re-clocked SDI outputs

Locking connector for power supply Compact and rugged design

Optional XLR breakout cable (XLR to BNC adaptors available for unbalanced AES outputs) Optional external power supply


www.miniblox.com


DS-4262D Iss1.2


2.967Gb/s) 1080p50/59.94/60


SD SMPTE 259M-C (270Mb/s) 625i 50 525i 59.94





>10dB 1.5 to 2.97GHz De-embedding Standards SMPTE 299M & 272M-C Audio outputs Outputs Balanced AES Number 4 Connector Female 15pin sub-D (optional XLR

breakout cable) Type Transformer coupled Sample rate 48kHz Standard AES3 Impedance 110Ω Output level 3.5v p-p ±5% Breakout cable (optional)

Balanced 4 male XLRs


Options 5CA15SD-X00 Audio cable HDD15 to 4M XLRs 4006 Desktop power supply with IEC inlet NADITBNC-M Male XLR to BNC adaptor for

unbalanced AES output 4010 1U rack mounting frame for up to 5 units



MiniBlox AES-EBU Audio

Distribution Amplifiers

DTL MiniBlox™ Specification

Balanced input Type Transformer coupled Standard 110Ω AES3-2003 Connector 9 way D type socket Return loss >40dB (0.1 to 6MHz) Signal level 2-7V p-p Max cable length >250m Sample Rate 32 – 192 kHz Balanced outputs Number Four transformer coupled Standard 110Ω AES3-2003 Connector 9 way D type socket Return loss >32dB (0.1 to 6MHz)

User Guide

Signal level 2-7V p-p Unbalanced output Number One Standard 75Ω AES3-id (SMPTE 276M) Connector BNC Return loss >32dB (0.1 to 6MHz) Level 1V p-p ±10% Power Voltage 6-12V DC Current 150mA at 6V Power connector Locking 2.5mm jack connector (centre +ve) Other LED Green for AES lock, red AES out-of lock Temperature range 0˚C to 40˚C Dimensions 63.5mm x 80mm x 30mm (excluding connectors) Weight 250g We reserve the right to change technical specifications without prior notice.

E&OE.

4600B Balanced AES-EBU audio DA

Provides four balanced and one unbalanced outputs

www.miniblox.com

DTL Broadcast Ltd, Johnson’s Estate, Silverdale Road, Hayes, Middlesex, UB3 3BA, UK Phone: +44 (0) 20 8813 5200 Fax: +44 (0) 20 8813 5022 Internet: www.dtl-broadcast.com [email protected]

\\Dtl-server\company\PRODUCTS\MiniBlox\User Guides\4600B Iss1.2.doc

- 4 -

DTL MiniBlox™ - solutions in a box D type pin connections General description Connections to a 9 way D type plug (not supplied) should be made as follows: The 4600B balanced AES-EBU audio DA accepts and automatically equalises one balanced input and provides four balanced outputs and one unbalanced output.

IN OUT 1 AES - 6 AES + 1 AES1 - 6 AES1 +

2 NC 7 NC 2 AES2 - 7 AES2 + 3 NC 8 NC 3 AES3 - 8 AES3 + 4 NC 9 NC 4 AES4 - 9 AES4 +

5 Ground 5 Ground It is housed in an extremely compact and rugged aluminium case ideally suited to both studio and portable applications.

Main features EU declaration of conformity

• Balanced AES3 110Ω input We certify that this apparatus conforms to the requirements of the EMC and Low Voltage Directives. Emissions EN55103-1, susceptibility EN55103-2 and safety EN60950-1 2002.

• Four balanced AES3 110Ω outputs • One unbalanced AES3-id 75Ω output • Automatically equalises over 250m of audio cable

15 July 2005 • Supports data rates from 32 to 192kHz • Transformer coupling on input and outputs for good common

mode and isolation performance

Warranty • Compact and rugged design DTL Broadcast Ltd warrants this unit against defects in materials and workmanship for a period of one year from the date of shipment. At its option, the company will repair or replace products that prove to be defective during the warranty period, provided they are returned to the company with advance notification and with freight prepaid. Repairs may only be conducted by an authorised representative of the company. As a result any unauthorised repair or attempted repair will automatically void the warranty.


Installation and operation The unit is simple to use and install.

• Connect balanced input to a 9 way D type plug (not supplied) per the table on the rear of the unit (and as detailed in the next section).

• Connect balanced outputs to a 9 way D type plug (not supplied) per the table on the rear of the unit (and as detailed in the next section).

When a distributor supplies the company's products, that distributor should be approached initially if there are any warranty problems. • Plug the D type into the socket on the unit and secure. The company makes no other warranties, express or implied, as to the merchantability, fitness for a particular purpose, or otherwise. The company’s liability for any cause, including breach of contract, breach of warranty, or negligence, with respect to products sold by it, is limited to repair or replacement by the company, at its sole discretion. This remedy is exclusive. In no event shall the company be liable for any incidental or consequential damages, including loss of profits.

• Connect the unbalanced output to the BNC socket detailed on the front of the unit (if required).

• Apply power to the unit either via the locking power connector from the external power supply or 1U rack frame, or by sliding into the 2U rack mounting frame with central power supplies.

• The LED then shows green when the AES is locked or red if out-of-lock.

• The mounting bracket supplied can be used to install the unit. The bracket should first be fixed vertically to any surface. The MiniBlox can then be lowered onto the dovetail part of the bracket with the front endplate uppermost to retain it.

- 2 - - 3 -

DTL MiniBlox™

4600U Unbalanced AES-EBU audio DA

Description

The 4600U Unbalanced AES-EBU audio DA accepts and automatically equalises one unbalanced input and provides four unbalanced outputs. It is housed in an extremely compact and rugged aluminium case ideally suited to both studio and portable applications.

Features • Unbalanced AES3-id 75Ω input

• Four unbalanced AES3-id 75Ω outputs

• Automatically equalises over 610m of cable

• Supports data rates from 32 to 192kHz




Input Return loss >32dB (0.1 to 6MHz) Standard 75Ω AES3-id (SMPTE 276M) Level 1V p-p ±10% Connector BNC Power Return loss >40dB (0.1 to 6MHz) Voltage 6-12V DC Signal level 1V p-p ±20% Current 150mA at 6V Max cable length >610m Power Connector Locking 2.5mm jack connector (centre +ve) Sample Rate 32 – 192 kHz Other Outputs LED Green for AES lock, red AES out-of lock Number Four Temperature range 0˚C to 40˚C Standards 75Ω AES3-id (SMPTE 276M) Dimensions 63.5mm x 84mm x 30mm (excluding connectors) Connector BNC Weight 150g

Ordering information 4600B Unbalanced AES-EBU audio DA 4006 Desktop power supply with IEC320 C14 inlet 4010 1U rack mounting frame for up to 5 units including PSU


Phone: +44 (0) 20 8813 5200 Fax: +44 (0) 20 8813 5022 Internet: www.dtl-broadcast.com Email: [email protected] F:\PRODUCTS\MiniBlox\Data Sheets\4600U Unbalanced AES-EBU audio DA Iss1.1.doc

MiniBlox

Audio Encoder and Decoder

DTL MiniBlox™

4610 AES-EBU to analogue stereo audio DAC

Description

The 4610 unit accepts balanced or unbalanced AES/EBU digital audio and converts it to balanced stereo analogue audio using a high quality 24-bit DAC. Analogue output gain can be adjusted to match all commonly used output levels. It is housed in an extremely compact and rugged aluminium case ideally suited to both studio and portable applications.

Features • Balanced AES3 input on 9 way D-

type socket or unbalanced AES-3id input on BNC

• Balanced and unbalanced analogue outputs on 9 way D-type socket

• 24-bit DAC resolution

• Output level continuously adjustable to cover all commonly used levels

• Transformer coupled balanced input for good common mode performance

• Operates at all sample rates from 32 to 96 kHz

• Automatic de-emphasis filtering




Balanced input Analogue outputs Type Transformer coupled Standards One balanced & one unbalanced stereo audio pair Standards AES3-2003 Impedance 50Ω balanced & 110Ω unbalanced Connector 9 way D type socket Connector 9 way D type socket Signal level 2-7V p-p Impedance 110Ω

Signal level Adjustable -6 to +27dBu balanced Adjustable -14 to +20dBu unbalanced

Max cable length >250m (at Fs=48kHz) Quantisation Up to 24 bit Sampling frequency (Fs) 32 - 96kHz Frequency response 20Hz to 20kHz ± 0.05dB (24dBu, Fs=48kHz) Return loss >32dB (0.1 to 6MHz) Power Unbalanced input Voltage 6-12 V DC Standards AES3-id (SMPTE 276M) Current 250mA at 6V Connector BNC Power connector Locking 2.5mm jack connector (centre +ve) Signal level 1V p-p ±20% Other Impedance 75Ω LED Power & signal presence Max cable length >1000m (at Fs=48kHz) Temperature range 0˚C to 40˚C Sampling frequency (Fs) 32–96kHz Dimensions 63.5mm x 84mm x 30mm (excluding connectors) Return loss >32dB (0.1 to 6MHz) Weight 150g

Ordering information 4610 AES-EBU to analogue stereo audio DAC 4006 Desktop power supply with IEC320 C14 inlet 4010 1U rack mounting frame for up to 5 units including PSU


Phone: +44 (0) 20 8813 5200 Fax: +44 (0) 20 8813 5022 Internet: www.dtl-broadcast.com Email: [email protected] F:\PRODUCTS\MiniBlox\Data Sheets\4610 AES-EBU to analogue stereo audio DAC Iss2.2.doc

DTL MiniBlox™

4640 Analogue stereo audio to AES-EBU ADC

Description

The 4640 Analogue stereo audio to AES-EBU ADC converts two balanced analogue audio inputs to balanced and unbalanced AES-EBU audio. It is housed in an extremely compact and rugged aluminium case ideally suited to both studio and portable applications.

Features • Balanced analogue stereo audio input

• Balanced AES3 110Ω and unbalanced AES3-id 75Ω outputs

• 24-bit ADC

• Locks to any AES reference from 32-96KHz or free runs at 48KHz

• Input gain controls to cover all commonly used levels

• Balanced inputs and outputs on a 9 way D type

• Unbalanced output and AES reference input on BNCs




Audio input Unbalanced output Type Balanced stereo analogue audio Number One Connector 9 way D type socket Standard 75Ω AES3-id (SMPTE 276M) Input impedance >20kΩ Connector BNC CMRR >70dB (20Hz to 20KHz) Return loss >32dB (0.1 to 6MHz) Input level range +12 to +24dBu Level 1V p-p ±10% AES reference Power Standard 75Ω AES3-id (SMPTE 276M) Voltage 6-12V DC Sample rate 32kHz to 96kHz Current 250mA Connector BNC Power Connector Locking 2.5mm jack connector (centre +ve) Return loss >36dB (0.1 to 6MHz) Other Level 1V p-p ±20% LED Green locked to external reference, orange internal

reference or red for error Balanced output Temperature range 0˚C to 40˚C Number One transformer coupled Dimensions 63.5mm x 84mm x 30mm (excluding connectors) Standard 110Ω AES3 Weight 150g Connector 9 way D type socket Return loss >32dB (0.1 to 6MHz) Signal level 2-7V p-p

Ordering information 4640 Analogue stereo audio to AES-EBU ADC 4006 Desktop power supply with IEC320 C14 inlet 4010 1U rack mounting frame for up to 5 units including PSU


Phone: +44 (0) 20 8813 5200 Fax: +44 (0) 20 8813 5022 Internet: www.dtl-broadcast.com Email: [email protected] F:\PRODUCTS\MiniBlox\Data Sheets\4640 Analogue stereo audio to AES-EBU ADC Iss1.1.doc

MiniBlox Analogue Video

Distribution Amplifier

DTL MiniBlox™

4500 Analogue VDA

Description The 4500 is a broadcast quality analogue video distribution amplifier. It has a looped input and three outputs. There are controls to adjust the gain and equalisation, as well as a button to reset the gain and equalisation to standard for minimum cable length. The unit will equalise up to 450m of cable. It is housed in an extremely compact and rugged aluminium case ideally suited to both studio and portable applications.

Features • Differential looping input and 3

outputs • Inherently good CMRR for hum

reduction • Signal presence LED • Gain & equalisation adjustment for

up to 450m of cable • Control reset button for simple

operation • Compact and rugged design • Locking connector for PSU

Controls • Equalisation control • Gain control • Control enable/reset button


Analogue input Impedance High impedance bridging 75Ω termination Pulse to bar ratio <0.2%K Connector 75Ω BNC Bar slope <0.2%K Common mode signal

>5V peak to peak Pulse slope <0.2%K

CMRR >60dB to 15kHz, >40dB @ 5.5MHz Y/C gain inequality <0.5% Return loss >36dB to 5.5MHz Y/C delay inequality <±1nS Cable equalisation 0 - 450m (Belden 8281) Isolation >70dB to 5.5MHz Analogue output Differential gain <0.1% (12.5-87.5% APL) Number Looping input and 3 outputs Differential phase <0.1˚ (12.5-87.5% APL) Connector 75Ω BNC Power Signal level 1V peak to peak Voltage 6-12V DC DC offset <±20mV Current 150mA Return loss >46dB to 5.5MHz Power connector Locking 2.5mm jack connector (centre +ve) Isolation >70dB to 5.5MHz Other Electrical length 11nS Eq set to 0m, 7nS Eq set to 150m LED Power only red, signal present, green Consistency Typically <0.5nS Performance Temperature range 0˚C to 40˚C Gain range ±3dB Dimensions 63.5mm x 84mm x 30mm (excluding connectors) Frequency response ±0.1dB to 20MHz, ±0.25dB to 30MHz, -1dB at 50MHz Weight 160g

Ordering information 4500 Analogue VDA 4006 Desktop power supply with IEC320 C14 inlet 4010 1U rack mounting frame for up to 5 units including PSU


DTL Broadcast Ltd, Johnson’s Estate, Silverdale Road, Hayes, Middlesex, UB3 3BA, UK. Phone: +44 (0) 20 8813 5200 Fax: +44 (0) 20 8813 5022 Internet: www.dtl-broadcast.com Email: [email protected] \\Dtl-server\company\PRODUCTS\MiniBlox\Data Sheets\4500 Iss3.1.doc

MiniBlox Desktop Power Supply

DTL MiniBlox™

4006 Desktop power supply

Description

The 4006 External desktop power supply with IEC mains inlet for worldwide operation. It provides sufficient power for any MiniBlox unit.

Features • External desktop power supply

with locking connector

• IEC320 C14 mains inlet for

worldwide operation


Input Connectors IEC320 C14 Voltage 90-264VAC Frequency 47-63Hz Current 400mA Performance Efficiency 70% minimum Output Connector Locking connector (2.5mm with +ve centre) Voltage 6V DC ±10% Current 2A Ripple & noise Typically 1% Other Standards UL listed & CE marked (IEC 60950) Temperature range 0°C to 40°C at maximum load Dimensions 91mm x 38mm x 35mm (excluding cable & connector) Weight 165g Safety approvals All major international standards including CE and UL


Phone: +44 (0) 20 8813 5200 Fax: +44 (0) 20 8813 5022 Internet: www.dtl-broadcast.com Email: [email protected] \\Dtl-server\company\PRODUCTS\MiniBlox\Data Sheets\4006 Desktop power supply Iss1.1.doc

MiniBlox Mounting Frames

DTL MiniBlox™

4010 1RU rack mounting frame

Description

• Rugged light weight frame • Holds up to five of any MiniBlox units • Central power supply • Power supply operates worldwide


Frame Number of units 5 maximum Power supply Input connector EC320 C14 Input voltage 90-264 VAC Input current 800mA Frequency 47-63Hz Current 4.16A Output voltage 6V DC ±10% on centre +ve 2.5mm jack connectors Approvals CE marked, UL listed and EN60950 Other Temperature range 0˚C to 40˚C Dimensions 44mm (1RU) x 478mm (19”)x 380mm Weight 1Kg

Ordering information 4010 1RU rack mounting frame



\\Dtlserver\products\MiniBlox\Data sheets\4010 1RU rack mounting frame Iss3.doc

DTL MiniBlox™

4020 2U rack mounting frame

DescriptionFrame for mounting up to 14 MiniBlox units in a 19” rack within 2RU of rack space.

MiniBlox units slide into guides & mate with power connectors that are bussed to the central power supply.

The frame requires one or two 4021 central power supplies which are fitted from the rear of the frame.

LEDs on front panel show power supply status.

Power supplies accept 100-240VAC at 47-63Hz and have IEC320 C14 mains inlets for worldwide operation. They comply with all major international standards including CE and UL.

www.miniblox.comSpecificationsFrameNumber of MiniBlox units 14 maximumNumber of power supplies required 1 or 2Power supplyInput connectors IEC320 C14Input voltage 100-240VACInput frequency 47-63Hz Input current 1.9AStandards All major international standards including CE and ULTemperature range 0C to 40C at maximum loadOtherDimensions 88mm (2U) x 478mm (19”) x 430mm Weight Frame 1Kg – power supply 750g

Ordering information4020 2U rack mounting frame for up top 14 units with single or dual power supplies4021 Central power supply for 4020 2U rack mounting frame


DTL Broadcast Ltd, Johnson’s Estate, Silverdale Road, Hayes, Middlesex, UB3 3BA, UK.Phone: +44 (0) 20 8813 5200 Fax: +44 (0) 20 8813 5022 Internet: www.dtl-broadcast.com Email: [email protected]

F:\PRODUCTS\MiniBlox\Data Sheets\4020 2RU rack mounting frame Iss2.0.doc

http://www.sterlingdobrasil.com.br

DTL Book

Documents

Transcript of DTL Book