dse9461-data-sheet-us
Transcript of dse9461-data-sheet-us
-
7/28/2019 dse9461-data-sheet-us
1/2
DSEPower
ENVIRONMENTAL TESTING STANDARD
ELECTRO-MAGNETIC COMPATIBILITY
BS EN 61000-6-2EMC Generic Immunity Standard for
the Industrial EnvironmentBS EN 61000-6-4EMC Generic Emission Standard for
the Industrial Environment
TEMPERATURE
BS EN 60068-2-1Ab/Ae Cold Test -30
oC
BS EN 60068-2-2Bb/Be Dry Heat +80
oC
* Refer to de-rating curve in the DSE9000Operator Manual
VIBRATION
BS EN 60068-2-6Ten sweeps in each of threemajor axes
5 Hz to 8 Hz @ +/-7.5 mm,8 Hz to 500 Hz @ 2 gn
HUMIDITY
BS EN 60068-2-30Db Damp Heat Cyclic 20/55
oC
@ 95% RH 48 HoursBS EN 60068-2-78
Cab Damp Heat Static 40o
C@ 93% RH 48 Hours
SHOCK
BS EN 60068-2-27Three shocks in each of three major axes15 gn in 11 mS
ISSUE
DSE9460/9461ENCLOSED INTELLIGENT BATTERY CHARGER5 AMP & 10 AMP, 12 VOLT & 24 VOLT OPTIONS
The DSE9460 & DSE9461 are
enclosed intelligent battery chargers
that can be programmed for
different charging curves to
maximise the life of the battery.
The DSE9460 & DSE9461 are
programmed using the user-friendly
DSE Configuration Suite PC
software.
The chargers are wall mounted
using the fixing holes that are built
into the case. The chargers stylish
design is available with a number of
display options including LCD
display, analoge meters and
indicator LEDs.
Multiple modules can be linked
together to provide a larger current
output.
It will also continue to operate
during high load conditions.
FEATURES
9461-01
9461-02
9461-03
9461-04
9461-11
9461-12
9461-13
9461-14
12v 10A (LCD)
12v 10A (LCD & Meters)
12v 10A (LED & Meters)
12v 10A (LED)
24v 10A (LCD)
24v 10A (LCD & Meters)
24v 10A (LED & Meters)
24v 10A (LED)
AVAILABLE 10 AMP VERSIONS
9460-01
9460-02
9460-03
9460-04
9460-11
9460-12
9460-13
9460-14
12v 5A (LCD)
12v 5A (LCD & Meters)
12v 5A (LED & Meters)
12v 5A (LED)
24v 5A (LCD)
24v 5A (LCD & Meters)
24v 5A (LED & Meters)
24v 5A (LED)
AVAILABLE 5 AMP VERSIONS
MODBUS/DSE2541 DISPLAY
COMPREHENSIVE FEATURE LIST TO SUIT A WIDE VARIETY OFBATTERY CHARGER APPLICATIONS
PC
CHARGE OUTPUT AC POWER SUPPLY
CONFIGURABLE INPUT
RS485 AUXILIARY DC OUTPUTUSB PORT
7
OTHER
DSE9460/DSE9461
TEMPERATURE SENSOR
PT1000 ONLY
CHANGE OVER VOLTS FREE FAULTRELAY
1 1
12V1ph
N
DSE2541
+
-
7/28/2019 dse9461-data-sheet-us
2/2
DSEPower
DEEP SEA ELECTRONICS PLC UKHighfield House, Hunmanby Industrial Estate, Hunmanby YO14 0PHTELEPHONE +44 (0) 1723 890099 FACSIMILE +44 (0) 1723 893303EMAIL [email protected] WEBSITE www.deepseaplc.com
DEEP SEA ELECTRONICS INC USA3230 Williams Avenue, Rockford, IL 61101-2668 USATELEPHONE +1 (815) 316 8706 FACSIMILE +1 (815) 316 8708EMAIL [email protected] WEBSITE www.deepseausa.com
055-153/11/12 (2)Registered in England & Wales No.01319649
VAT No.316923457
Deep Sea Electronics Plc maintains a policy of continuous development and reserves the right to change the
details shown on this data sheet without prior notice. The contents are intended for guidance only.
KEY BENEFITS
Fully flexible to maximise the life of the battery
Suitable for a wide range of battery types
Switched mode design
Fault output
Minimum 86% efficiency throughout full operating
range
No external intervention for boost mode
Multiple chargers can be linked together to provide
larger current output
Can be permenantly connected to battery and mains
supply. No need to disconnect through high load
conditions.
ADVANCED FEATURES
Intelligent two, three and four stage charging profiles
Configurable to suit most battery types (12V/24V)
Adjustable current limit
Can be used as a battery charger, power supply or both at
the same time
Automatic or Manual boost and storage charge functions to
help maintain battery condition
Digital Microprocessor Technology
Temperature compensation for battery charging Low Output Ripple and superb line regulation
Available in a number of display variants (LEDs, Analogue
Meters, LCD display)
Full Protection
AC input Under voltage
AC input Over voltage
Battery charger output Over voltage
Battery charger output Over current
Battery temperature compensation with over temperature
protection
Output short circuit and Inversion polarity with auto
recovery
Automatic power de-rating at high ambient temperatures
Automatic Boost Mode
Boosts and equalises cell charge improving battery
performance and lifePower Save Mode
Once the battery is fully charged the chargers switch to Eco-
Power to save energy
Communication
Can be integrated into external systems through MODBUS
RTU using RS485
Fully configurable via DSE Configuration Suite PC Software
External remote LCD option
RELATED MATERIALS
TITLE PART NOSDSE9000 Configuration Suite PC Software Manual 057-159DSE Configuration Suite Installation & Operator Manual 057-151DSE9460/DSE9461 Series Installation Instructions 053-148DSE9460/DSE9461 Series Operator Manual 057-176DSE2541 Data Sheet 055-160DSE2541 Installation Instructions 053-154
DSE9460/9461ENCLOSED INTELLIGENT BATTERY CHARGER5 AMP & 10 AMP, 12 VOLT & 24 VOLT OPTIONS
FEATURES
SPECIFICATION
AC SUPPLY
VOLTAGE RANGE
90 V to 305 V (L-N)
FREQUENCY RANGE
48 Hz to 64 Hz (L-N)
DC OUTPUT RATING
DSE9460 OUTPUT
5 A DC at 12 V & 24 V DC
DSE9461 OUTPUT
10 A DC at 12 V & 24 V DC
RIPPLE AND NOISE
86%
AUXILIARY OUTPUT
100 mA DC at 12 V
REGULATION
LINE