SAFETY DATA SHEET (SOS) - LagunaClay.com Carbide... · SAFETY DATA SHEET (SOS) (
Dse8620 Data Sheet
2
DSE8620 AUTO MAINS FAILURE & INSTRUMENTATION CONTROL MODULE DSEGenset ® 1 1ph 2ph 3ph N 1ph 1ph 2ph 3ph E N 1ph 2ph 3ph N 1 11 232 6 4 MODEM ISSUE 1 RS232 AND RS485 CONFIGURABLE INPUTS DC OUTPUTS ANALOGUE SENDERS EMERGENCY STOP DC POWER SUPPLY 8-35V DEUTZ ISUZU PERKINS CATERPILLAR MTU VOLVO CUMMINS SCANIA + D + W/L GENERATOR SENSING VOLTS VOLTS CURRENT CURRENT ELECTRONIC ENGINES & MAGNETIC PICK-UP FUEL & CRANK OUTPUTS FLEXIBLE WITH CAN CHARGE ALTERNATOR N/O VOLT FREE OUTPUT N/C VOLT FREE OUTPUT MAINS (UTILITY) SENSING + COMPREHENSIVE FEATURE LIST FOR SINGLE GEN-SET PARALLELING WITH MAINS (UTILITY) 7 OTHER DSE8620 The DSE8620 is an Auto Mains (Utility) Failure Control Module suitable for paralleling single gen- sets (diesel or gas) with the mains (utility) supply. The module will automatically start the generator on detection of a mains failure, and will control the switchover from and back to the mains (utility) supply, offering an uninterrupted return. The modules synchronising functions include automatic synchronising with built-in synchroscope and closing onto dead bus. Direct and flexible outputs from the module are provided to allow connection to the most commonly used speed governors and automatic voltage regulators (AVRs). A sophisticated module monitoring an extensive number of engine parameters, the DSE8620 will annunciate warnings, shutdown and engine status information on the back-lit LCD screen, illuminated LED, remote PC, audible alarm and via SMS text alerts. The module includes RS232 and RS485 ports as well as dedicated terminals for system expansion. The DSE8620 is compatible with electronic (CAN) and non-electronic (magnetic pick-up/alternator sensing) engines and offers a comprehensive number of flexible inputs, outputs and extensive engine protections so the system can be easily adapted to meet the most demanding industry paralleling requirements. The modules can be easily configured using the DSE Configuration Suite Software. Selected front panel editing is also available. FEATURES ENVIRONMENTAL TESTING STANDARDS ELECTRO-MAGNETIC COMPATIBILITY BS EN 61000-6-2 EMC Generic Immunity Standard for the Industrial Environment BS EN 61000-6-4 EMC Generic Emission Standard for the Industrial Environment ELECTRICAL SAFETY BS EN 60950 Safety of Information Technology Equipment, including Electrical Business Equipment TEMPERATURE BS EN 60068-2-1 Ab/Ae Cold Test -30 o C BS EN 60068-2-2 Bb/Be Dry Heat +70 o C VIBRATION BS EN 60068-2-6 Ten sweeps in each of three major axes 5 Hz to 8 Hz @ +/-7.5 mm, 8 Hz to 500 Hz @ 2 gn HUMIDITY BS EN 60068-2-30 Db Damp Heat Cyclic 20/55 o C @ 95% RH 48 Hours BS EN 60068-2-78 Cab Damp Heat Static 40 o C @ 93% RH 48 Hours SHOCK BS EN 60068-2-27 Three shocks in each of three major axes 15 gn in 11 mS DEGREES OF PROTECTION PROVIDED BY ENCLOSURES BS EN 60529 IP65 - Front of module when installed into the control panel with the supplied sealing gasket. DSE2130 DSE2157 DSE2548 485 MODBUS USB PORT USB HOST ETHERNET PC DSENET EXPANSION
-
Upload
gustavo-pereira -
Category
Documents
-
view
8 -
download
0
description
Deep Sea controle e pararelismo
Transcript of Dse8620 Data Sheet
DSE8620AUTO MAINS FAILURE & INSTRUMENTATIONCONTROL MODULE
DSEGenset
®
11ph2ph3phN
1ph 1ph2ph3phEN
1ph2ph3phN
1
11
232
6 4
MODEM
ISSUE 1
RS232 ANDRS485
CONFIGURABLEINPUTS
DC OUTPUTS ANALOGUESENDERS
EMERGENCY STOP
DC POWER SUPPLY 8-35V
DEUTZISUZUPERKINSCATERPILLARMTUVOLVOCUMMINSSCANIA
+D +W/L
GENERATOR SENSING
VOLTSVOLTS CURRENTCURRENT
ELECTRONICENGINES &MAGNETIC PICK-UP
FUEL & CRANKOUTPUTSFLEXIBLE WITH CAN
CHARGEALTERNATOR
N/O VOLTFREE OUTPUT
N/C VOLT FREEOUTPUT
MAINS (UTILITY) SENSING
+
COMPREHENSIVE FEATURE LIST FOR SINGLEGEN-SET PARALLELING WITH MAINS (UTILITY)
7
OTHER
DSE8620
The DSE8620 is an Auto Mains(Utility) Failure Control Modulesuitable for paralleling single gen-sets (diesel or gas) with the mains(utility) supply. The module willautomatically start the generator ondetection of a mains failure, and willcontrol the switchover from andback to the mains (utility) supply,offering an uninterrupted return.
The modules synchronisingfunctions include automaticsynchronising with built-insynchroscope and closing ontodead bus. Direct and flexibleoutputs from the module areprovided to allow connection to themost commonly used speedgovernors and automatic voltageregulators (AVRs).
A sophisticated module monitoringan extensive number of engineparameters, the DSE8620 willannunciate warnings, shutdownand engine status information onthe back-lit LCD screen, illuminatedLED, remote PC, audible alarm andvia SMS text alerts. The moduleincludes RS232 and RS485 portsas well as dedicated terminals forsystem expansion.
The DSE8620 is compatible withelectronic (CAN) and non-electronic(magnetic pick-up/alternatorsensing) engines and offers acomprehensive number of flexibleinputs, outputs and extensiveengine protections so the systemcan be easily adapted to meet themost demanding industryparalleling requirements.
The modules can be easilyconfigured using the DSEConfiguration Suite Software.Selected front panel editing is alsoavailable.
FEATURES
ENVIRONMENTAL TESTING STANDARDS
ELECTRO-MAGNETIC COMPATIBILITYBS EN 61000-6-2EMC Generic Immunity Standard for the Industrial EnvironmentBS EN 61000-6-4EMC Generic Emission Standard for the Industrial Environment
ELECTRICAL SAFETYBS EN 60950Safety of Information Technology Equipment, including Electrical Business Equipment
TEMPERATUREBS EN 60068-2-1Ab/Ae Cold Test -30 oCBS EN 60068-2-2Bb/Be Dry Heat +70 oC
VIBRATIONBS EN 60068-2-6Ten sweeps in each of three major axes5 Hz to 8 Hz @ +/-7.5 mm, 8 Hz to 500 Hz @ 2 gn
HUMIDITYBS EN 60068-2-30Db Damp Heat Cyclic 20/55 oC@ 95% RH 48 HoursBS EN 60068-2-78Cab Damp Heat Static 40 oC@ 93% RH 48 Hours
SHOCKBS EN 60068-2-27Three shocks in each of three major axes15 gn in 11 mS
DEGREES OF PROTECTIONPROVIDED BY ENCLOSURESBS EN 60529IP65 - Front of module when installed into thecontrol panel with the supplied sealing gasket.
DSE2130DSE2157DSE2548
485
MODBUS
USBPORT
USBHOST
ETHERNET
PC
DSENETEXPANSION
DEEP SEA ELECTRONICS PLC UKHighfield House, Hunmanby Industrial Estate, Hunmanby YO14 0PHTELEPHONE +44 (0) 1723 890099 FACSIMILE +44 (0) 1723 893303EMAIL [email protected] WEBSITE www.deepseaplc.com
DEEP SEA ELECTRONICS INC USA3230 Williams Avenue, Rockford, IL 61101-2668 USATELEPHONE +1 (815) 316 8706 FACSIMILE +1 (815) 316 8708EMAIL [email protected] WEBSITE www.deepseausa.com
055-099/05/11 (1)
KEY LOAD SHARE FEATURES• No-break return• Peak shaving/peak lopping• kW on mains (utility) level• Mains (utility) decoupling testmode
• Manual speed/frequency adjust• ROCOF & vector shift• Direct governor & AVR control• Volts & frequency matching• kW and kV Ar load sharing• Manual voltage & frequencyadjust
KEY FEATURES• Configurable inputs (11)• Configurable outputs (8)• Voltage measurement• Built-in governor and AVRcontrol
• Mains (utility) failure detection• Dedicated load test button• MV-LV synchronising• kW overload alarms• Comprehensive electricalprotection
• Magnetic pick-up• Electronic engine capability • RS232 & RS485 remotecommunications
• Modbus RTU • PLC functionality• Multi event exercise timer • Back-lit LCD 4-line text display• Multiple display languages• Automatic start/Manual start• Audible alarm• Fixed and flexible LED indicators • Event log (250)• Engine protection• Fault condition notification to a designated PC
• Front panel mounting• Protected front panelprogramming
• PC configuration• Configurable alarms and timers• Configurable start and stoptimers
• SMS alert messaging• Remote monitoring
KEY BENEFITS• RS232 & RS485 can be used at the same time
• DSENet® connection forsystem expansion
• PLC functionality• Five step dummy load support• Five step load shedding support• High number of inputs andoutputs
• Worldwide language support• Configuration Suite PC software• Direct USB connection to PC• Ethernet monitoring• USB host• Data logging & trending
DSENet®EXPANSION DEVICES• DSE2548 LED ExpansionModule
• DSE2130 Input ExpansionModule
• DSE2157 Output ExpansionModule
RELATED MATERIALSTITLE PART NO’SDSE8620 Installation Instructions 053-129DSE8620 Operator Manual 057-142DSE8600 PC Configuration Suite Manual 057-119
SPECIFICATION
DC SUPPLYCONTINUOUS VOLTAGE RATING8 V to 35 V Continuous
CRANKING DROPOUTSAble to survive 0 V for 50 mS, providing supply was at least 10 V before dropoutand supply recovers to 5 V. This is achieved without the need for internal batteries
MAXIMUM OPERATING CURRENT460 mA at 12 V, 245 mA at 24 V
MAXIMUM STANDBY CURRENT375 mA at 12 V, 200 mA at 24 V
CHARGE FAIL/EXCITATION RANGE0 V to 35 V
OUTPUTSOUTPUT A (FUEL)15 A DC at supply voltage
OUTPUT B (START)15 A DC at supply voltage
OUTPUTS C & D8 A AC at 250 V AC (Volt free)
AUXILIARY OUTPUTS E,F,G2 A DC at supply voltage
GENERATOR AND MAINS (UTILITY)VOLTAGE RANGE 15 V to 333 V AC (L-N)
FREQUENCY RANGE3.5 Hz to 75 Hz
MAGNETIC PICK UPVOLTAGE RANGE+/- 0.5 V to 70 V
FREQUENCY RANGE10,000 Hz (max)
BUILT-IN GOVERNOR AND AVRCONTROLMINIMUM LOAD IMPEDANCE1000ΩFully isolated
GAIN VOLTAGE0 V to 10 V DCFully isolated
OFFSET VOLTAGE+/- 10 V DCFully isolated
DIMENSIONSOVERALL240 mm x 172 mm x 57 mm 9.4” x 6.8” x 2.2”
PANEL CUTOUT 220 mm x 160 mm 8.7” x 6.3”
MAXIMUM PANEL THICKNESS8 mm0.3”
DSE8620AUTO MAINS FAILURE & INSTRUMENTATIONCONTROL MODULE
®
DSEGenset
FEATURES
Registered in England & Wales No.01319649VAT No.316923457
Deep Sea Electronics Plc maintains a policy of continuous development and reserves the right to changethe details shown on this data sheet without prior notice. The contents are intended for guidance only.
