DRYDOCKING & REPAIRS

Piraeus Marine Services S.A. collaborates with well-established, modern shipyards which provide valuable expertise, experience and the required skills to undertake ship repairs and dry-docking with reliability at competitive prices. You will achieve the best deals by appointing us as your brokers.

WHY USE PMS S.A AND NOT GO DIRECTLY TO THE YARD?

• You can benefit from our experience, as PMS undertakes dry-docking and repairs of more than 15 vessels per year.

• We can provide you with inside information and possible alternatives, in case the Ship Yard is busy or overbooked.

• We offer competitive prices.

• Yards give priority to our customers' vessels as they rely on our business.

WE ARE IN CLOSE COOPERATION WITH THE FOLLOWING DRY-DOCKS:

SEFINE SHIPYARD

Our Company is proud to announce a very close cooperation with Sefine Shipyard, at your service for repair works with a new dry dock: 240m x 42m x 9m, suitable for Panamax and Aframax vessels. Sefine was established in 2005 in a vast territorial area of 140.000 m2 and has the biggest waiting dock of 600m in length in Altinova/Yalova, Turkey.

EIFFEL MARINE INDUSTRY

Based in Saint-Nazaire, Eiffel Industry Marine has numerous port facilities at the Port of Nantes Saint-Nazaire, and is able to accommodate vessels of large capacity. The port of Saint-Nazaire has substantial infrastructure: a floating dock and four dry-docks for ships up to 240,000 DWT: 350m x 50m x 13m for the maintenance of vessels.

VDS SHIP REPAIRS

VDS has sufficient facilities for ship repairs at the wharf of VDS but also on location in the ports of Rotterdam, Antwerp, Ghent and Flushing. VDS has the in-house knowledge for ship repairs involving steel, hydraulics, pneumatics and engines and can provide you with service 24 hours a day, seven days a week. VDS has a 250-metre quay which can accommodate every type of job.

2x1 HOLDING CAPE MIDIA SHIPYARD

2x1 Holding Cape Midia Shipyard is located on the Romanian coast north of Constanta. The shipyard has 734m of fitting-out berths, one repair berth within the Port of Constanta and three floating docks: two floating docks of 158,4m x 28,2m x 7,4m and one floating dock of 210,6m x 35,8m x 9,45m.

ODESSOS SHIPREPAIR YARD SA

Odessos Ship-Repair Yard S.A. is the largest well equipped yard in Bulgaria, situated on an about one mile south of Port Varna, suitable for repair and dry-docking of vessels up to 70,000 DWT and afloat repairs of vessels up to 150,000 DWT. A new-built floating dock enables to drydock Panamax type vessels up to 70,000 DWT. Graving-dock: 240m x 27m, Floating-docks: 160m x 27m & 219m x 36,2m.

continues

DRYDOCKING & REPAIRS

SEFINE SHIPYARD

EIFFEL MARINE INDUSTRY

2x1 HOLDING CAPE MIDIA SHIPYARD

ODESSOS SHIPREPAIR YARD SA

OMAN DRYDOCK COMPANY S.A.O.C. (ODC)

CSSC GUANGZHOU DOCKYARDS Co. Ltd

CHINA SHIPPING INDUSTRY CO. LTD.

ASL MARINE HOLDINGS LTD.VDS

OMAN DRYDOCK COMPANY S.A.O.C. (ODC)

Oman Dry-dock Company S.A.O.C. was established in September 2006 by the Government ofSultanate Oman (GOSO), located in Duqm, Al Wusta Region in Oman. ODC is operated byDaewoo Shipbuilding & Marine Engineering Co., Ltd (DSME) in South Korea which is a leading shipbuilder in the world. ODC Ship Repair Capacity is suitable for vessels up to ULCC-size. Dock Capacity of two Graving Docks: 410m × 95m & 410m × 80m / Future Float-ing Dock: 300m (L) × 70m (B). Berthing Facilities consist of 5 Berths of 3,600m in total length.

CSSC GUANGZHOU DOCKYARDS Co. Ltd, Wenchong branch in Huangpu

Guangzhou Dry-docks is located in South China and is held by CSSC. It has experience in ship repairs and conversion of all kinds of bulk carriers, containers, oil tankers, chemical tankers, LNG & LPG. The company has three graving docks of 150.000 DWT, 200,000 DWT, 300,000 DWT and 2.400 m of berths. Dimensions: 360m x 65m x 13.3m & 300m x 74m x 13.3m.

CHINA SHIPPING INDUSTRY CO. LTD.

China Shipping Industry (Shanghai Pudong) Co., Ltd., founded in December 2008, is a subsidiary company of China Shipping Industry Co., Ltd. (abbreviated as CIC), China Shipping (Group) Company (abbreviated as CS). Relying on the brand resources of CS and the manage-ment and technical support from CIC, our company makes good use of the nine docks with a total capacity of 850,000 DWT, 7290 m length repair berth, located in Shanghai, Yangtze River Delta and Guangzhou, Pearl River Delta in order to provide the best service to our customers and clients.

ASL MARINE HOLDINGS LTD.

ASL Marine, headquartered in Singapore, owns and operates 3 shipyards in Singapore, Indo-nesia and China. Over the past 30 years, the Group has developed a niche market in building and repairing medium size vessels. Ship repair activities are carried out in Singapore and Indonesia. The Group operates a 20,000 DWT floating dock and a 150,000 dwt graving dry dock in Batam,Indonesia which is one of the few shipyards in the region capable of repairing Capesize vessels.

MARINE CONSULTANTS & TECHNICAL MANAGEMENT

NAVAL ARCHITECTS - MARINE ENGINEERS

Our team of Naval Architects and Marine Engineers provides assistance in the following:

• CONSULTANCY & DESIGN- MODIFICATIONS• CONDITION & APPRAISAL SURVEYS• MARINE CLAIMS• PRE-PURCHASE SURVEYS• SHIP REPAIRS & CONVERSIONS

CONSULTANCY

PMS SA consists of a team of experienced surveyors from various backgrounds such as Chief Engineers, Masters and graduates in Naval Architecture and Marine Engineering with many years of experience at sea and ashore as Technical Managers or Superintendent Engineers and as Surveyors. We combine technical knowledge with an understanding of the industry and its practices in providing assistance and technical advice to our clients.

The range of surveys we carry out includes:

• Damage surveys - vessel, fixed and floating objects• Collision/contacts - Grounding• Cruise vessels & Yacht surveys• P&I and H&M condition surveys• Flag state inspections• On/Off hire/pre-purchase surveys• Bunker surveys

Certain cases call for particular expertise, for instance destructive and non-destructive testing, metallurgical examination, chemical analysis, underwater inspections, deepwater surveying and cam cording or cargo sam-pling. In such cases we subcontract outside our firm.

TECHNICAL MANAGEMENT

Highly qualified Engineers can undertake the technical management and Supervision of vessels, providing follow-up of ISM and ISPS standards. Our Engineering team follows vessels’ performance and maintenance closely as our goal is proactive management.

SERVICE ENGINEERS

P.M.S S.A can provide full technical support solutions for MARINE ENGINES, ranging from spare parts supply, to on site repairing and overhauling. Our Spare Parts Team can provide GENUINE or OEM spare parts with fast delivery and at competitive prices. Our Service Team consists of highly experienced and specialized professionals who are ready to assist your company at a short notice.

PMS provides service for the following Marine Engines:

We are also specialized in:

• SULZER - RD, RND, RTA TUNING• YANMAR, NIGATA, HANSHIN & MAK ENGINES• GEISLINGER COUPLING VIBRATION DAMPER• AIRFLEX CLUTCH• CONTROLLABLE PITCH PROPELLERS & BOW THRUSTERS• FULL TECHNICAL SUPPORT SOLUTIONS

P.M.S provides full technical support solutions for Controllable Pitch Propellers and Bow Thrusters, ranging from spare parts supply, to on site repairing and overhauling. We can provide spare parts with fast delivery and at competitive prices. Our team is ready to travel anywhere in the world to assist your company at a short notice.

FRAMO PUMPS SERVICE TEAM

P.M.S. is in close cooperation with Framo Pumps and can provide full technical support solutions for the follow-ing marine systems:

Cargo Pumping & Heating Systems, Ballast Pumping System, Anti-Heeling System, Hydraulic Piping System, Project Assistance

CUMMINS – DEUTZOur specialized Service Engineers Team has 20 years of experiencein servicing Cummins-Deutz Engines.

PIELSTICKOur experienced German Service Engineer can attend your vessel’s Pielstick Engine at short notice and at a very low cost. We provide Pielstick Spare Parts mainly from Germany, UK and China.

CATTERPILLAR

DETROIT DIESEL

MARINE EQUIPMENT

SPARE PARTS

PMS S.A. as a spare parts broker has the knowledge and power to serve you well by providing all types of spare parts (genuine, under license or O.E.M.) in co-operation with our affiliated companies. We can provide you with new spare parts from Europe (Poland, U.K., Denmark, Germany, etc.), Japan, Korea, China, as well as used spare parts from India and Singapore. We can provide warehouses in Greece, India and China for second hand spares. We can negotiate prices, payment terms and delivery because manufacturers rely on our orders and our purchases.

Here below is some of the equipment we can provideyou via our large net of ORIGINAL manufacturers,sub-contractors and suppliers:

• MAIN AND AUXILIARY ENGINE SPARES• TURBOCHARGER’S SPARES• AIR COMPRESSOR’S SPARES• PURIFIER’S SPARES• PUMPS• CRANES, ANCHORS, WIRE-ROPES ETC.

SUPPLIES

P.M.S. is specialized in providing supplies of thehighest quality at very competitive prices, ensuringthat the items quoted are supplied.

• Ship stores (deck / engine room / cabin etc.)• Provisions (frozen / fresh / bonded store)• General spare parts• Charts and nautical publications• Medicine supply with certificate to meet WHO• Electronics• Safety equipment annual service

continues

MARINE EQUIPMENT

MARILIA - PMC PERFORMANCE MOTOR CLEANER

P.M.S. & Marilia provide full technical support solutions for Performance Motor Cleaner liquid. PMC is a superior cleaning liquid for removing oil contaminated build up and salt in the air cooler, valves and turbine blades. With PMC the clean-ing procedure is easy and safe as it is non-toxic, biodegradable and non-flammable. FOR QUESTIONS AND ENQUIRIES CONTACT: marl@otenet.grOR CALL: +30 210 4117908

VESCONITE RUDDER BEARING BUSH MATERIAL for Dry-docking:

Vesconite is a high-load, low friction and low wear rate material with negligible water absorption. It offers the best quality/cost ratio in the market and it is approved by all major Classifications. Ex-stock delivery at a reasonable cost is usually possible due to large stock. Fitting and machining instructions are provided which makes it is easy to machine and fit.

MULTIMETAL CUSTOM METAL FABRICATING SPECIALISTS

Multimetal Products Corporation specializes in high quality fabrications of stain-less steel, aluminum, carbon steel and plastic. Multimetal creates parts accu-rately while providing unbeatable lead times - a valuable combination to keep customers satisfied.

MANNING SERVICES & FLYING TEAMS

MANNING SERVICES

PMS provides qualified and competent crews of various nation-alities: Latvian, Estonian, Lithuanian, Slovakian, Czech, Roma-nian, Bulgarian, Ukrainian, Georgian, Russian, Indian, Indone-sian, Egyptian, Myanmar, Dominican Republic, Philippines and Greek for all type of vessels.

Crewmembers are personally selected and prospective appli-cants carefully screened to verify their experience, competence, fitness and comprehension of English prior to enlistment. A policy of selective recruitment, together with continuous upgrade training and performance appraisal, guarantees quality manpower, proficiency and safety on board.

• P.M.S. Crew Department provides well-educated, highly qualified and experienced seafarers• All our seafarers are holders of certificates in compliance with IMO, STCW’95 and USCG regulations and requirements• Everyone is fully familiarized with the ISM Code• Passed medical examinations (incl. drug-alcohol tests), English examinations and Alpha’s internal professional tests

FLYING TEAMS

PMS carries out voyage repairs and sea-going maintenance, providing riding repair teams all over the world. Our team consists of Qualified Fitters and Welders who are holders of Class Certificates. They are mainly of Greek nationality as well as Bulgarian, Romanian, Ukrainian and Polish. With trained and experienced engineers and technicians attending, we can avoid vessel delay or ship’s off-hire and keep it operational and profitable.

Our team is ready to undertake routine or emergency repairs on:

• Main and auxiliary engine overhauling, crankshaft replacement• General repairs in Engine Room• Electrical Works• Hydraulic Works• Piping Works• Steel Works

PMS has created a well organized and high qualified ship repair team. Our skilled team can work under tight schedules with guaranteed performance. Our main goal is to provide quality and cost-efficient services.

QUALITY & SAFETY SERVICES

MANUALS DEVELOPMENT

Our company’s team of specialized and certified professionals can efficiently undertake the developmentof any QHSE relevant manual in order to enable the highestlevel of performance and regulatory compliance. Namely,these manuals can be:

• Safety Management System (ISM)• Ship Security Plan (ISPS)• ISO 9000, 14000• Risk Assessment• Emergency Towing Procedures Manual, due 1/1/2012• STCW *Manila Amendments 2010, due 1/1/2012

SYSTEMS IMPLEMENTATION, AUDITING & TRAINING

It is our firm belief that every system’s implementation should be closely monitored and examined. Our company’s team can provide a wide range of services that enable invaluable insight and feedback on critical areas of your organization both ashore and onboard. Shortly, these can be:

• ISM, ISPS systems implementation• Internal audits and preparation for external audits onboard and ashore• Shipboard and ashore personnel training• Investigation & Analysis of PSC deficiencies• Accident - Incident Investigation & Analysis and recommendation of corrective action.

Our team is committed not only to achieve compliance with all International Regulations, but also focuses on providing the most applicable and easy-to-use solutions, thus minimizing all unnecessary paperwork.

SECURITY, ANTI-PIRACY SERVICES

Maritime Anti-Piracy Services

P.M.S. SA are in close cooperation with an experienced team focused on Maritime Anti-Piracy Services with a strong presence and effective preven-tion of piracy in all hot spot areas (such as Somalia, Yemen, Suez Canal, SriLanka & S. India, Malacca Straight and W. Africa) so we can guarantee SAFE PASSAGE.

Please note that our teams are covered and accepted by P & I Clubs and have the following accreditations:

• Signatory Company of the International Code of Conduct for Private security service providers (ICoC)• Member of the Security Association for the Maritime Industry (SAMI)• Fully complied with the IMO standards regarding the Pirate Security Companies

We also supply razor wire directly from the manufacturer in North Europe and we have stock in Port Said.