Driveline 12 - Custom Bikes by Mike 12.pdf · Complete RevTech ® Drive Train Kits ... the engine...

For the Dealer Nearest You, Call: 800-729-3332 12.01

Driveline

12

12

Driv

eline

12.02

12

Prices appearing in this catalog are Suggested Retail Price and are subject to change*

Complete RevTech® Drive Train Kits

RevTech® Complete Drive Train Kits for Softail® ModelsCustom Chrome® has taken the guess work out of the parts needed for a complete drive train for Softail® models. The kits include everything from theengine to transmission and all hardware needed in-between. Only the finest parts have been selected for maximum reliability and performance, making it an easy proposition for replacing an existing drive train or for custom applications. Each kit includes: a RevTech® chain drive primary kit with Kevlar®

clutch, polished or black powder coated high-torque starter, jackshaft, heavy duty alternator rotor, stator, all mounting hardware, seals, bushings and gaskets. Does not include the rectifier/regulator.

Kits for Softail® Models with 1994-1999 PrimariesNatural/ChromeFeature natural finish engines with machined fins, chrome covers, polishedtransmissions, chrome inner and outer primary covers and polished startermotors.658750 100" 4x4 motor with 5-speed close-ratio transmission . . . . .$8,559.00

658751 100" 4x4 motor with 6-speed transmission . . . . . . . . . . . . . . . .$8,749.00

658770 110" motor with 5-speed close-ratio transmission . . . . . . . . .$9,029.00

658771 110" motor with 6-speed transmission . . . . . . . . . . . . . . . . . . . .$9,219.00

Polished/ChromeFeature polished engines with chrome covers, polished transmissions,chrome inner and outer primary covers and polished starter motors.658752 100" 4x4 motor with 5-speed close-ratio transmission . . . . .$9,699.00


658772 110" motor with 5-speed close-ratio transmission . . . . . . . .$10,169.00

658773 110" motor with 6-speed transmission . . . . . . . . . . . . . . . . . . .$10,359.00

Black/ChromeFeature black powder-coated engines with machined fins and chrome covers, black powder-coated transmissions and inner primary covers, chrome outer primary covers and black starter motors.658754 100" 4x4 motor with 5-speed close-ratio transmission . . . . .$8,759.00




Kits for Softail® Models with 1989-1993 PrimariesNatural/ChromeFeature natural finish engines with machined fins, chrome covers, polishedtransmissions, chrome inner and outer primary covers and polished startermotors.658756 100" 4x4 motor with 5-speed close-ratio transmission . . . . .$8,579.00




Polished/ChromeFeature polished engines with chrome covers, polished transmissions,chrome inner and outer primary covers and polished starter motors.658758 100" 4x4 motor with 5-speed close-ratio transmission . . . . .$9,719.00


658778 110" motor with 5-speed close-ratio transmission . . . . . . . .$10,199.00

658779 110" motor with 6-speed transmission . . . . . . . . . . . . . . . . . . .$10,379.00

Black/ChromeFeature black powder-coated engines with machined fins and chrome covers, black powder-coated transmissions and inner primary covers, chrome outer primary covers and black starter motors.658760 100" 4x4 motor with 5-speed close-ratio transmission . . . . .$8,779.00




Apparel

Bike Kits& Trailers

Seats & Bags

Foot Controls

Hand Controls

Lighting

Electrical

Exhaust

Intake

Engine

Gaskets

Tranny& Clutch

Driveline

Wheels,Tires & Brakes

Frames

Forks& Shocks

Sheet-metal

General

CrossReference

RevTech® Complete Drive Train Kits for Softail® Models with TÜVCustom Chrome® has taken the guess work out of the parts needed for a complete drive train for Softail® models. The kits include everything from theengine to transmission and all hardware needed in-between. Only the finest parts have been selected for maximum reliability and performance, making itan easy proposition for replacing an existing drive train or for custom applications. Each kit includes: a RevTech® chain drive primary kit with Kevlar® clutch,polished or black powder coated high-torque starter, jackshaft, heavy duty alternator rotor, stator, all mounting hardware, seals, bushings and gaskets. Doesnot include the rectifier/regulator.

Kits for Softail® Models with 1994-1999 PrimariesNatural/ChromeFeature natural finish engines with chrome covers, polished transmissions,chrome inner and outer primary covers and polished starter motors.58664 88" motor with 5-speed close-ratio transmission . . . . . . . . . . . . .$7,799.00

58665 88" motor with 6-speed transmission . . . . . . . . . . . . . . . . . . . . . . . .$7,989.00

Polished/ChromeFeature polished engines with chrome covers, polished transmissions,chrome inner and outer primary covers and polished starter motors.58614 88" motor with 5-speed close-ratio transmission . . . . . . . . . . . . .$8,749.00


Black/ChromeFeature black powder-coated engines with machined fins and chrome covers, black powder-coated transmissions and inner primary covers, chrome outer primary covers and black starter motors.58694 88" motor with 5-speed close-ratio transmission . . . . . . . . . . . . .$7,999.00


Kits for Softail® Models with 1989-1993 PrimariesNatural/ChromeFeature natural finish engines with chrome covers, polished transmissions,chrome inner and outer primary covers and polished starter motors.58660 88" motor with 5-speed close-ratio transmission . . . . . . . . . . . . .$7,819.00


Polished/ChromeFeature polished engines with chrome covers, polished transmissions,chrome inner and outer primary covers and polished starter motors.58610 88" motor with 5-speed close-ratio transmission . . . . . . . . . . . . .$8,769.00


Black/ChromeFeature black powder-coated engines with machined fins and chrome covers, black powder-coated transmissions and inner primary covers, chrome outer primary covers and black starter motors.58690 88" motor with 5-speed close-ratio transmission . . . . . . . . . . . . .$8,019.00


12.03

Complete RevTech® Drive Train Kits

For the Dealer Nearest You, Call: 800-729-3332

Driv

eline

12.04

BDL Top Fuel Belt Drives

12


42905

BDL ‘Top Fuel Street Drive’ Primary Drive Kits• Utilize a 14mm x 33/8"-wide belt which is the same as the top

fuel racers use on the 600-plus horsepower machines• Kevlar® clutch consists of nine 63/8"-diameter friction plates and

eleven steel drive plates• Special pressure plate uses up to nine springs for varying spring

pressure to accommodate any size motor on the market• Hub is made from 7075 aluminum and then hard anodized

for superior strength• TF-1000 includes oil filter mount and side guard• TF-2000 includes everything in the TF-1000, plus a reversible

outboard bearing support• Fit all Softail® models from 1991 to present42905 TF-2000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$2,769.00

42908 TF-1000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$2,254.00

Replacement Belt for BDL TF-1000 and TF-200042906 Replacement 14mm x 33/8"-wide drive belt . . . . . . . . . .$215.99

Replacement Clutch Plates for BDL TF-1000 and TF-2000612260 Kevlar® clutch plates (set of 9) . . . . . . . . . . . . . . . . . . . . . . .$137.25

612261 Steel clutch plates (set of 11) . . . . . . . . . . . . . . . . . . . . . . . . .$41.63

Offset Pulley Inserts with Nuts*For wide rear tire applications choose appropriate offset insert.42866 Pulley ONLY for Softail® models . . . . . . . . . . . . . . . . . . . . .$116.99

42868 .25" offset insert (*not applicable for TF-1000/2000) . . . . . . . . . . . . . . . . . . .$81.99

42869 .50" offset insert (*not applicable for TF-1000/2000) . . . . . . . . . . . . . . . . . . .$81.99

42870 .75" offset insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$81.99

42871 1.00" offset insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$81.99

42872 1.25" offset insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$81.99

612225 1.50" offset insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$81.99

612226 1.75" offset insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$81.99

612227 2.00" offset insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$81.99

Primary Spacers*For wide rear tire applications choose appropriate primary spacer.612230 .25" primary spacer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$81.99

612231 .50" primary spacer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$81.99

612232 .75" primary spacer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$81.99

612233 1.00" primary spacer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$81.99

612234 1.25" primary spacer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$81.99

612235 1.50" primary spacer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$81.99

612236 1.75" primary spacer (*not applicable for TF-1000/2000) . . . . . . . . . . . . . . . . . . .$81.99

612237 2.00" primary spacer (*not applicable for TF-1000/2000) . . . . . . . . . . . . . . . . . . .$81.99

*Note: BDL Top Fuel Belt Drives use a .50" pulley offset insert as delivered. For wide tireapplications, use a pulley offset insert that is .50" wider than the primary spacer. Forexample, to space primary 1.50", use a 2.00" offset insert and a 1.50" primary spacer.

42908

Apparel

Bike Kits& Trailers

Seats & Bags

Foot Controls

Hand Controls

Lighting

Electrical

Exhaust

Intake

Engine

Gaskets

Tranny& Clutch

Driveline


Frames

Forks& Shocks

Sheet-metal

General

CrossReference

12.05

BDL 3" Open Belt Drives


BDL 3" Open Belt Drives with Outboard Support This new version adds an outboard support to their already popular 3"open belt drive. The outboard support adds increased rigidity that keepsthe engine and transmission shaft from flexing under high loads. An excellent choice for wide-tire high horsepower applications.

For Softail® Models from 1990 to Present612250 Without oil filter mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$2,418.75

612251 With oil filter mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$2,643.75

For Dyna Glide Models from 1991 thru 1999612252 Without oil filter mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$2,418.75

For Dyna Glide Models from 2000 to Present612253 Without oil filter mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$2,418.75

BDL EVO-3000 Retrofit KitBillet outboard support plate for BDL 3" open belt drives that did not comeequipped with one. Includes polished support, polished pulley covers, newpressure plate and hardware. Note: Modifications must be made for fitment.

612245 Retrofit billet outboard support plate . . . . . . . . . . . . . . . . . . . . . . .$675.00

BDL 3" Belt Drive Kits with Billet Motor Plates Beefy, one-piece 6061-T6 polished billet motor plate locks the tranny andengine together. Kits are available with an optional oil filter mount cen-tered in the motor plate. The fanning condition set up by the spinning pul-leys and belt creates extra cooling for the filter, and the kit allows the oillines to be hidden out of the way. All of these kits include a 3"-wide beltdrive unit with polished pressure plate, double-row sealed mainshaft bear-ing, polished aluminum side plate and pulley covers, and a complete‘Competitor Clutch’ with Kevlar® plates. For installation in wide frame/tireapplications, choose the appropriate insert to space the front pulley out foryour particular frame and driveline combination.

For Softail® Models from 1990 to Present42845 With oil filter mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$1,929.00

42644 Without oil filter mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$1,436.00

For 5-Speed Softail® Models from 1986 thru 198942844 With oil filter mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$1,929.00

42645 Without oil filter mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$1,729.99

For Dyna Glide Models from 1991 thru 199942646 Without oil filter mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$1,729.99

For Dyna Glide Models from 2000 to Present612240 Without oil filter mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$1,800.00

For FXR Models from 1990 thru 1994May also be used in custom late-model rubber-mount frames using FXR transmissions.42647 Without oil filter mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$1,729.99

For Shovelhead Models with 4-Speed Ratchet Top Transmissionsfrom 1970–early 1979 without Starter Motor42508 Without oil filter mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$1,729.99

For Shovelhead Models with 4-Speed Ratchet Top Transmissionsfrom 1970–early 1979 with Starter Motor42579 Without oil filter mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$1,999.00

Note 1: Installation requires use of a 1991 or later starter motor, and the use of a late 1979 orlater clutch arm (CC #18430) which must be modified to provide adequate clearance.

Note 2: FX models require removal of the OEM oil tank bracket to allow proper starter fitment.Note 3: No provision is made for footpegs or floorboards with these kits.

Replacement Belts42515 Fits CC #612250, 612251, 612252, 612253, 42845,

42644, 42844, 42645, 42646 and 612240 . . . . . . . . . . . . . . . . . . . .$1,729.99

42516 Fits CC #42647 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$1,729.99

43036 Fits CC #42508, 42579 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$1,729.99

Replacement Clutch Plates for 3" BDL Open Belt Drives612265 Kevlar® clutch plates (set of 7) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$105.75

612266 Steel clutch plates (set of 7) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$28.13

42637 Steel backing plate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$10.99

Offset Pulley Inserts with NutsFor wide tire applications choose appropriate offset insert.42866 Pulley ONLY for Softail® models . . . . . . .$116.99

42868 .25" offset insert . . . . . . . . . . . . . . . . . . . . . .$81.99

42869 .50" offset insert . . . . . . . . . . . . . . . . . . . . . .$81.99

42870 .75" offset insert . . . . . . . . . . . . . . . . . . . . . .$81.99

42871 1.00" offset insert . . . . . . . . . . . . . . . . . . . . .$81.99

42872 1.25" offset insert . . . . . . . . . . . . . . . . . . . . .$81.99

612225 1.50" offset insert . . . . . . . . . . . . . . . . . . . . .$81.99

612226 1.75" offset insert . . . . . . . . . . . . . . . . . . . . .$81.99

612227 2.00" offset insert . . . . . . . . . . . . . . . . . . . . .$81.99

Primary SpacersFor wide tire applications choose appropriate primary spacer.612230 .25" primary spacer . . . . . . . . . . . . . . . . . . . .$81.99

612231 .50" primary spacer . . . . . . . . . . . . . . . . . . . .$81.99

612232 .75" primary spacer . . . . . . . . . . . . . . . . . . . .$81.99

612233 1.00" primary spacer . . . . . . . . . . . . . . . . . .$81.99

612234 1.25" primary spacer . . . . . . . . . . . . . . . . . .$81.99

612235 1.50" primary spacer . . . . . . . . . . . . . . . . . .$81.99

612236 1.75" primary spacer . . . . . . . . . . . . . . . . . .$81.99

612237 2.00" primary spacer . . . . . . . . . . . . . . . . . .$81.99

Driv

eline

12.06

BDL Belt Drives

12


BDL 3"-Wide Primary Drive Kitsfor Kick Start ApplicationsEliminate gyroscopic imbalance and belt whip-ping found in many 3" drives with a BDL drivekit that puts the inner hub a full inch furtherinboard than most other belt drives. With therear pulley further over the main shaft virtuallyall instability in the primary drive is eliminated.The 8mm pulleys are hard anodized and use aspecial belt that traps less air than HTD belts.The rear pulley has a double row bearing thatsupports a ‘Stressproof’ steel clutch hub. Alsoincluded are a clutch and polished aluminumpressure plate. Safety guards are always recom-mended with 3" drive systems. . . . . . . . . . . .$785.9942537 Kit with 47/72-tooth pulleys for Softail®

models with splined shaft from 1990 to present

42536 Kit with 47/72-tooth pulleys for Softail®

models with tapered shaft from late1986 thru 1989

42541 Kit with 47/76-tooth pulleys for Panheadand Shovelhead models with splinedshaft from 1955-early 1984

42542 Kit with 47/72-tooth pulleys (for lessengine speed) for Shovelhead modelswith splined shaft from 1965-early 1984

42540 Kit with 47/76-tooth pulleys for Panheadand Knucklehead models with taperedshaft from 1936 thru 1954

BDL Wide-Belt Primary Drives for Kick Start Big TwinsThe 2" and 3"-wide pulleys and clutch hubs arecast from 356-T6 aluminum and machined inBDL’s own foundry and machining operation.These kits use the stock clutch hub and clutch,and include 76-tooth clutch basket and 47-toothengine pulleys, 8mm-pitch belt, and ‘Big Fix’clutch hub roller bearings.42534 3"-wide kit for Big Twins with splined

shaft from 1955-early 1984 . . . . . .$428.99

42533 3"-wide kit for Big Twins with taperedshaft from 1936 thru 1954 . . . . . . .$428.99

42532 2"-wide kit for Big Twins with splinedshaft from 1955-early 1984 . . . . . .$369.99

42531 2"-wide kit for Big Twins with taperedshaft from 1936 thru 1954 . . . . . . .$369.99

BDL 11mm Primary Belt Drive Kits11/2"-wide, 11mm belt kits include an extra beltwith every kit. For precision belt adjustment, kitsfor aluminum-primary Big Twins include a BDLidler that makes sure belt tension is correct (tinprimary models use tranny adjustment for cor-rect belt tension). All kits use 31-tooth enginepulleys and 47-tooth clutch pulleys.42589 Fits 5-speed models with electric

start from 1980-early 1984 . . . . . . .$378.99

42588 Fits 4-speed models with electric start from 1965-early 1984 . . . . . . .$378.99

42890 Same as CC #42588 but specifically for models with factory rear belt driveand belt drive inner primary . . . . .$378.99

42587 Fits splined shaft 4-speed kick start models from 1965-early 1984 . . . .$342.99

42586 Fits splined shaft 4-speed kick start models from 1955 thru 1964 . . . . .$295.99

42585 Fits tapered shaft 4-speed kick start models from 1936 thru 1954 . . . .$295.99

BDL 8mm Primary Belt Drive Kits for 4-Speed ModelsThe 8mm belt pitch has been used for years onprimary drives and the 11/2"-wide kit is consid-ered by many to provide the best all-aroundcombination for dependable operation. Kitsinclude front pulley, rear clutch hub/pulley andan extra replacement belt. Designed for usewith existing clutch hub and clutch.42524 40/60-tooth pulleys for electric start

models from 1965 thru 1978 . . . . .$349.99

42525 41/61-tooth pulleys for electric startmodels from 1980-early 1984 . . . .$349.99

42526 Same as CC #42525 but specifically for models with factory rear belt driveand belt drive inner primary . . . . .$349.99

42527 39/62-tooth pulleys for kick start models with tapered engine shaft from 1936 thru 1954 . . . . . . . . . . . . .$271.99

42528 39/62-tooth pulleys for kick start models with splined engine shaft from 1955 thru 1964 . . . . . . . . . . . . .$271.99



BDL 8mm ’Bolt-In’ Belt Drive KitsEngineered to handle the most brutal torqueand horsepower demands. Requires no primarycase modifications to install. Features a cylindri-cal-shaped, replaceable clutch dog capable ofwithstanding 1200 foot pounds of torque. BDL’ssteel hub design moves the clutch basketinward, eliminating unnecessary weight hang-ing from the mainshaft. Barnett Kevlar® clutchprovides 70% greater surface area than stockfor maximum hook-up. Complete kit includesfront and rear pulleys, clutch, and a sealed primary bearing. . . . . . . . . . . . . . . . . . . . . . . . . .$599.9442520 Fits Softail® and Dyna Glide models

from 1994 to present42519 Fits Softail® and Dyna Glide models

from 1990 thru 199342518 Fits Softail® models from 1986 thru 198942670 Fits rubber-mount Big Twin models

(except Dyna Glide models) from 1994 to present

42671 Fits rubber-mount Big Twin models(except Dyna Glide models) from 1990 thru 1993

42672 Fits rubber-mount Big Twin models from 1986 thru 1989

42673 Fits 5-speed Shovelhead models withchain rear drive from 1980 thru 1983

42521 Fits 4-speed Shovelhead models withchain rear drive from 1965-early 1984

42674 Fits 4-speed Shovelhead models withbelt rear drive from 1980-early 1984

BDL Retro-Fit Clutch for 3" Primary Belt DrivesThis complete clutch package features BDL’sadvanced design that moves weight in-boardof the bearing to eliminate gyroscopic-inducedvibration in the primary drive. Complete withKevlar clutch, polished aluminum pressure platewith springs, shoulder bolts, clutch basket, steelclutch hub, double sealed bearing and all hard-ware. It is designed to be used with existing 3"front pulley and 8mm-pitch belts on 1936-early1984 kick start models. . . . . . . . . . . . . . . . . . .$542.9942543 Complete kit

Apparel

Bike Kits& Trailers

Seats & Bags

Foot Controls

Hand Controls

Lighting

Electrical

Exhaust

Intake

Engine

Gaskets

Tranny& Clutch

Driveline


Frames

Forks& Shocks

Sheet-metal

General

CrossReference

12.07

BDL Belt Drive Accessories


44714

44716

BDL Covers for 3" Belt DrivesThese covers look great while they protect the belt from roaddebris and your legs and boots from the belt. They’re made frombillet aluminum and attach securely in minutes with four sturdymounts to ensure stability. Available in three streamlined versionswith chrome or polished finishes, these covers are the safest wayto add style to your primary belt drive. Fit Softail® and Dyna Glidemodels from 1984 to present.44714 Polished “open clutch” . . . . . . . . . . . . . . . . . . . . . . . . . . . .$349.99

44715 Chrome “open clutch” . . . . . . . . . . . . . . . . . . . . . . . . . . . .$428.99

44716 Polished “two hole” . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$349.99

44717 Chrome “two hole” . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$428.99

44718 Polished “no hole” . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$349.99

44719 Chrome “no hole” . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$428.99

BDL Polished AluminumAlternator Cover for 3" Open Belt DrivesAdd some sparkle to that often overlooked spoton 3" open belt drives. This heavy gauge pol-ished aluminum cover has a mirror finish thatwill bring out the best in your belt drive. Coverinstalls on alternator shaft between the alterna-tor rotor and belt drive pulley. No extra mount-ing hardware required.071084 Fits all 3" open belt drives . . . . . . . .$19.99

250310

Three Piece Belt Drive CoversNo doubt about it, Primo and BDL 3" open primary belt drives are about the coolest thing you can boltonto a Harley. With this three-piece cover set, you can take it a step further and put your belt drive intooverdrive. Machined from heavy billet aluminum, then show chromed, this kit will completely transformthe appearance of your belt drive. Now you can replaces the industrial appearance present in beltdrives with brilliant smooth flowing lines. These parts have a depth of finish that stamped aluminum or steel covers just can't touch. For BDL or Primo 3" open belt drives (must be version with motor plateto use center section). Sold complete with all mounting hardware. Made in USA.250300 Fits all BDL 3" open belt drives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$299.99

250310 Fits all Primo 3" open belt drives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$319.99

44718

Driv

eline

12.08

BDL Belt Drive Parts & Accessories

12


BDL Parts and AccessoriesThis page has a variety of accessories and replacement parts for the BDL primary belt and chain drive kits sold by Custom Chrome.

Replacement Parts for ‘Bolt In’8mm Primary Belt Drive KitsOffset Front Pulley42893 Fits CC #’s 42518, 42519, 42520 . . .$116.99

Front Belt Drive Pulleys and Guides42881 45 tooth for Softail® and 4-speed

Shovelhead models . . . . . . . . . . . . . .$109.99

42882 48 tooth for 5-speed Shovelhead and FXR models . . . . . . . . . . . . . . . . .$109.99

42883 Inner belt guide for CC #42881 . . . . .$6.49

42884 Outer belt guide for CC #42881 . . . .$6.49

Clutch BasketsInclude basket with clutch dogs, bearing andstarter ring gear.44624 Fits Shovelhead models from 1970-early

1984 (CC #’s 42521, 42673) . . . . . . .$237.99

42885 Fits Softail®, Dyna Glide and FXR modelswith 68-tooth ring gears from 1986 topresent (CC #’s 42518, 42519, 42520,42670, 42671, 42672, 42674) . . . . .$230.99

Clutch Hubs42604 Clutch hub for splined mainshafts

from 1990 to present . . . . . . . . . . . .$118.99

42605 Clutch hub for tapered mainshafts from 1986 thru 1989 . . . . . . . . . . . . .$116.99

42607 Clutch hub for Shovelheads from 1965 thru 1984 . . . . . . . . . . . . .$116.99

Round Clutch Dog SetsSold in packs of 12.42886 Fits Softail®, FXR and 5-speed

Shovelhead models . . . . . . . . . . . . . . .$47.99

42887 Fits 4-speed Shovelhead models . . .$47.99

Mainshaft Clutch Hub Nut42888 Fits Big Twins from 1990 to present

(includes seal) . . . . . . . . . . . . . . . . . . . . .$6.74

Pressure Plate Components42598 Pressure plate for Big Twins

from 1984 to present . . . . . . . . . . . . .$50.99

42599 Shoulder bolts for CC #42598 . . . . .$16.99

42606 Clutch springs for Big Twins from 1984 to present (set of 6) . . . .$16.99

42842 Clutch adjusting rod for 1990 to present . . . . . . . . . . . . . . . . . . . .$6.89

Miscellaneous Parts42632 C-clip for backside of clutch hub . . .$1.99

42633 2.44" C-clip for hub bearing . . . . . . .$2.49

42634 Kevlar® clutch plate, 1-sided . . . . . .$16.49

42635 Kevlar® clutch plate, 2-sided . . . . . .$16.49

42636 Notched steel drive plate . . . . . . . . .$10.99

42637 Splined steel drive plate . . . . . . . . . .$10.99

42643 ‘Round dog’ steel drive plate . . . . . .$10.99

42638 40mm double row basket hub bearing . . . . . . . . . . . . . . . . . . . . . .$50.99

42639 Sealed inner primary bearing for Big Twins from 1985 to present . . .$16.49

42600 Primary seal for Big Twins from 1986 to present . . . . . . . . . . . . . .$7.99

42640 Seal kit for Evolution® models with adjustable clutch rods . . . . . . .$10.99

42641 Steel step washer for Evolution®

Big Twin models . . . . . . . . . . . . . . . . . . .$3.29

42593 Washer for splined engine shaft . . . .$1.99

42597 Flat hex splined shaft engine nut . . .$4.19

Replacement Parts for 3" BeltDrive Kits with Billet Motor PlatesPolished Aluminum Motor Plates ONLY42850 Fits Softail® models (includes

bearing) . . . . . . . . . . . . . . . . . . . . . . . .$849.99

42851 Fits 1970 thru 1978 Shovelheads (includes bearing) . . . . . . . . . . . . . . .$849.99

42852 Fits 1990 thru 1994 FXR models (includes bearing) . . . . . . . . . . . . . . .$849.99

42853 Fits Dyna Glide models from 1991 thru 1999 (includes bearing) . . . . .$849.99

Polished Billet Starter Housings42854 Fits BDL Evolution® style motor

plates . . . . . . . . . . . . . . . . . . . . . . . . . . .$116.99

42855 Fits BDL Shovelhead motor plates . . . . . . . . . . . . . . . . . . . . . . . . . . .$116.99

Polished Aluminum Side Plates42856 Fits Softail® and Dyna Glide

models . . . . . . . . . . . . . . . . . . . . . . . . . . .$84.99

42857 Fits Shovelhead models . . . . . . . . . . .$84.99

42858 Fits FXR models . . . . . . . . . . . . . . . . . . .$84.99

Motor Plate Mainshaft Bearing and Clip42862 Fits Evolution® models . . . . . . . . . . . .$59.99


42864 C-Clip bearing retainer . . . . . . . . . . . . .$6.49

Starter Pinion Gears42623 Fits 5-speed Softail®, Dyna Glide

and FXR models . . . . . . . . . . . . . . . . . .$74.99


Hardware Mounting KitsFor mounting 3" open belt drive kits. Includesstand offs, engine and transmission mountinghardware.42859 Fits Softail® and FXR models . . . . . .$59.99


42861 Fits Dyna Glide models . . . . . . . . . . . .$59.99

Replacement 3" BasketsIncludes basket, gear, dogs and bearing.44625 Fits Softail®, FXR, and

Dyna Glide models . . . . . . . . . . . . . .$356.99

44626 Fits Shovelhead models . . . . . . . . . .$356.99

Replacement Parts for BDL Chain Primary KitsClutch Pack Kits42837 Kevlar® clutch plates (set of 7) . . . . .$99.99

42838 Steel drive plates (set of 8) . . . . . . . .$59.99

42839 Clutch pressure plate . . . . . . . . . . . . .$81.99

Clutch Hubs and Nuts42830 Fits 1936 thru 1984 taper shaft . . .$116.99

42831 Fits 1986 thru 1989 taper shaft . . .$116.99

42832 Fits 1990-up splined shaft . . . . . . . .$116.99

42843 Clutch hub nut . . . . . . . . . . . . . . . . . . . .$9.49

Clutch Baskets with Competitor Clutches44629 Fits kick start models ONLY

from 1955 thru 1983 . . . . . . . . . . . . .$714.99

Step Washer42833 Fits splined shaft clutch hubs . . . . . . .$6.49

Shoulder Bolts42840 Fits CC #42839 (set of 9) . . . . . . . . . . . .$9.94

Clutch Springs42841 Fits CC #42840 shoulder bolts and

#42839 pressure plate (set of 9) . . .$12.49

Clutch Adjusting Screw and Nut42842 Fits BDL chain drive primary kits . . . .$6.89

C-Clips42834 Fits clutch hub . . . . . . . . . . . . . . . . . . . . .$2.59

42835 Fits backside clutch hubs . . . . . . . . . . .$1.89

42836 Fits step washer . . . . . . . . . . . . . . . . . . .$4.99

Miscellaneous Parts42592 Washer for tapered engine shaft . . .$1.99

42593 Washer for splined engine shaft . . . .$1.99

42596 Flat hex tapered shaft engine nut . .$4.19

42597 Flat hex splined shaft engine nut . . .$4.19

Primary Belt Pulley SpacersAvoid premature belt failure due to misalign-ment of the front and rear primary pulleys.Designed for use behind the motor pulley toachieve proper front to rear belt alignment. Sold in ten-packs of various sizes as well as on a ‘shop supply’ card of 5 kits, each kit containing one of each size.42150 ‘Shop supply’ card of 5 kits . . . . . . . .$18.49

42151 .010"-thick (pack of 10) . . . . . . . . . . . .$9.99

42152 .020"-thick (pack of 10) . . . . . . . . . . .$10.74

42153 .040"-thick (pack of 10) . . . . . . . . . . .$11.49

42154 .060"-thick (pack of 10) . . . . . . . . . . .$12.29

Apparel

Bike Kits& Trailers

Seats & Bags

Foot Controls

Hand Controls

Lighting

Electrical

Exhaust

Intake

Engine

Gaskets

Tranny& Clutch

Driveline


Frames

Forks& Shocks

Sheet-metal

General

CrossReference

12.09

BDL Belt Drive Parts & Accessories


Pulleys for Pre-Evolution® Big Twins42548 Front 39-tooth tapered engine shaft,

11/2" 8mm belt . . . . . . . . . . . . . . . . . . .$81.99

42549 Front 39-tooth splined engine shaft, 11/2" 8mm belt . . . . . . . . . . . . . . . . . . .$81.99



42552 Front 31-tooth tapered engine shaft, 11/2" 11mm belt . . . . . . . . . . . . . . . . . .$81.99

42553 Front 31-tooth splined engine shaft, 11/2" 11mm belt . . . . . . . . . . . . . . . . . .$81.99

42554 Front 47-tooth tapered engine shaft, 2" 8mm belt . . . . . . . . . . . . . . . . . . . .$104.00

42555 Front 47-tooth splined engine shaft, 2" 8mm belt . . . . . . . . . . . . . . . . . . . .$104.00

42556 Front 47-tooth tapered engine shaft, 3" 8mm belt . . . . . . . . . . . . . . . . . . . .$116.99

42557 Front 47-tooth splined engine shaft, 3" 8mm belt . . . . . . . . . . . . . . . . . . . .$116.99

42563 Rear 61-tooth kick start, 11/2" 8mm belt . . . . . . . . . . . . . . . . . .$230.99

42564 Rear 62-tooth kick start, 11/2" 8mm belt . . . . . . . . . . . . . . . . . .$230.99

42565 Rear 61-tooth electric start, 11/2" 8mm belt . . . . . . . . . . . . . . . . . .$271.99

42566 Rear 47-tooth kick start, 11/2" 11mm belt . . . . . . . . . . . . . . . . .$259.99

42567 Rear 47-tooth electric start, 11/2" 11mm belt . . . . . . . . . . . . . . . . .$314.99

42568 Rear 47-tooth electric start 5-speed tranny, 11/2" 11mm belt . . . . . . . . . .$314.99

42569 Rear 76-tooth kick start, 2" 8mm belt . . . . . . . . . . . . . . . . . . . .$259.99

42570 Rear 76-tooth kick start, 3" 8mm belt . . . . . . . . . . . . . . . . . . . .$328.99

BDL Primary Pulleys and AccessoriesBy controlling the entire manufacturing process from design to casting to finish machining, BDL provides consistent high-quality products. Pulleys are castfrom 356T6 aluminum in their own foundry, and finished in their own machining center so that you know that every pulley will be exactly what you need to transmit all that thundering power to the road.

Pulleys for Evolution® Big Twin Models42559 Rear splined mainshaft 72-tooth with

clutch hub, 13/4" 8mm belt . . . . . . .$386.99

42560 Rear tapered mainshaft 72-tooth withclutch hub, 3" 8mm belt . . . . . . . . .$428.99

42561 Rear splined mainshaft 72-tooth withclutch hub, 3" 8mm belt . . . . . . . . .$428.99

42562 Rear pre-1983 mainshaft 76-tooth withclutch hub, 3" 8mm belt . . . . . . . . .$428.99

Pulley Offset Inserts with NutsFor wide tire applications choose appropriateoffset insert.42866 Pulley ONLY for Softail® models . .$116.99

42868 .25" offset insert . . . . . . . . . . . . . . . . .$81.99

42869 .50" offset insert . . . . . . . . . . . . . . . . .$81.99

42870 .75" offset insert . . . . . . . . . . . . . . . . .$81.99

42871 1.00" offset insert . . . . . . . . . . . . . . . .$81.99

42872 1.25" offset insert . . . . . . . . . . . . . . . .$81.99

612225 1.50" offset insert . . . . . . . . . . . . . . . .$81.99

612226 1.75" offset insert . . . . . . . . . . . . . . . .$81.99

612227 2.00" offset insert . . . . . . . . . . . . . . . .$81.99

Primary SpacersFor wide tire applications choose appropriate primary spacer.612230 .25" primary spacer . . . . . . . . . . . . . . .$81.99

612231 .50" primary spacer . . . . . . . . . . . . . . .$81.99

612232 .75" primary spacer . . . . . . . . . . . . . . .$81.99

612233 1.00" primary spacer . . . . . . . . . . . . . .$81.99

612234 1.25" primary spacer . . . . . . . . . . . . . .$81.99

612235 1.50" primary spacer . . . . . . . . . . . . . .$81.99

612236 1.75" primary spacer . . . . . . . . . . . . . .$81.99

612237 2.00" primary spacer . . . . . . . . . . . . . .$81.99

Primary Drive Components42601 Clutch basket and hub Big Twins

1965 thru 1984 . . . . . . . . . . . . . . . . . .$349.99

42602 Clutch basket and hub Big Twins 1986 thru 1989 . . . . . . . . . . . . . . . . . .$349.99

AccessoriesStarter Upgrade Kit for BDL ApplicationsIncludes a 66-tooth starter ring gear and a 9-tooth starter gear. Permits you to upgrade your 1994-up Big Twin to this heavy-duty (early-style) setup.42698 Fits Big Twins 1994 to present . . . . .$84.99

42699 9-tooth starter extension pinion gear only . . . . . . . . . . . . . . . . . .$74.99

Idler Bearing Kit42608 Fits 11mm belt drive units . . . . . . . . .$46.99

Polished Aluminum Open Belt Drive Pulley Cover SetPolished and undrilled. Installation requiresdrilling the pulleys and covers, or using an adhe-sive to attach the covers.42648 Fits 72-tooth/47-tooth pulleys . . . . .$59.99

42846 Fits CC #42508 for Shovelheads . . . .$59.99

Belt Guides42609 Front pulley inner belt guide

for 8mm and 11mm drives . . . . . . . . .$5.79

42610 Front pulley outer belt guide for 8mm and 11mm drives . . . . . . . . .$5.79

Starter Ring Gears for BDL Belt Drives42582 Fits Big Twins 1965-early 1984

(for CC# 42524, 42525, 42526, 42588,42589) . . . . . . . . . . . . . . . . . . . . . . . . . . .$50.99

42583 Fits Big Twins 1985 thru 1993 (for all BDLbelt drives, open or closed, with BDLclutch) . . . . . . . . . . . . . . . . . . . . . . . . . . .$50.99

Billet Aluminum Rear Belt Pulley SpacersFor offset belt and wide rear tire applications.42691 .250"-thick . . . . . . . . . . . . . . . . . . . . . . .$29.99

42692 .375"-thick . . . . . . . . . . . . . . . . . . . . . . .$37.99

42693 .500"-thick . . . . . . . . . . . . . . . . . . . . . . .$44.99

42694 .750"-thick . . . . . . . . . . . . . . . . . . . . . . .$59.99

42695 .937"-thick . . . . . . . . . . . . . . . . . . . . . . .$59.99

42696 1.100"-thick . . . . . . . . . . . . . . . . . . . . . .$74.99

42697 1.250"-thick . . . . . . . . . . . . . . . . . . . . . .$74.99

Mainshaft Bearing SupportRe-establishes mainshaft bearing support whencast inner primary cover is removed in open beltdrive applications. Cast aluminum constructionwith reinforcement ribs. Fits Big Twins (exceptmodels with diaphragm clutch) 1966 thru 1984.060689 Mainshaft support

with bearings . . . . . . . . . . . . . . . . . . . .$39.99

20014 Support plate (bearing not included) . . . . . . . . . . . .$30.29

20015 Bearing (repl. OEM 9061) sold each . . . . . . . . . . . . . . . . . . . . . . . . .$18.99

42868

Driv

eline

12.10

Primo ‘Brute IV’ & ‘Brute V’ Belt Drives

12


Primo ‘Brute IV’ 3" Open Belt Drive Kits for Big TwinsDesigned for electric start models with forward controls. Complete kitsinclude the Primo billet motor plate available in either a polished or naturalaluminum finish, clutch basket with clutch, motor pulley, polished plain beltshroud, starter shaft extension assembly and hardware. To optimize thelook, a chrome-plated belt shroud and clutch dome are available. See page 12.13.

Complete Kits with Polished Motor Plate43115 Fits Twin Cam 88® Softail® models from 2000 to present . . . . .$2,014.00

42653 Fits Evolution® Softail® models from 1990 thru 1999 . . . . . . . . .$2,019.00

42654 Fits Dyna Glide models from 1991 to present . . . . . . . . . . . . . . . .$1,959.00

43114 Fits all rubber-mount Big Twin models from 1990 thru 1999 (except Dyna Glide models) . . . . . . . . . . . . . . . . . . . . . .$1,999.00

071239 Fits Shovelhead models with ratchet top transmissions from 1970-early 1979 (requires 1990-up starter motor) . . . . . .$2,029.99

Complete Kits with Natural Finish Motor Plate43111 Fits Evolution® Softail® models from 1990 thru 1999 . . . . . . . . .$1,909.99

43112 Fits Dyna Glide models from 1991 to present . . . . . . . . . . . . . . . .$2,119.00

43113 Fits all rubber-mount Big Twin models from 1990 thru 1999 (except Dyna Glide models) . . . . . . . . . . . . . . . . . . . . . .$1,909.99

Complete Kit with 1/2" Offset Polished Motor PlateUse with a 1/2" offset transmission to clear wide tire applications.42659 Fits Evolution® Softail® models from 1990 thru 1999 . . . . . . . . .$1,999.99

071237 Fits Shovelhead models with ratchet top transmissions from 1970-early 1979 (requires 1990-up starter motor) . . . . . .$2,429.00

Polished Motor Plate Only42650 Fits Evolution® Softail® models from 1990 thru 1999 . . . . . . . . .$1,379.00

Replacement Parts85151 Starter shaft extension assembly, 1990 to present . . . . . . . . . . . . .$199.99

43036 Primary belt, 8 mm x 3", 144-teeth for Softail®

and Dyna Glide applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$156.99

85188 Clutch friction plate pack (set of 6) . . . . . . . . . . . . . . . . . . . . . . . . . . . .$74.99

85189 Clutch steel plate, .080"-thick (sold each) . . . . . . . . . . . . . . . . . . . . . .$10.99

85190 Clutch steel pate, .047"-thick (sold each) . . . . . . . . . . . . . . . . . . . . . .$10.99

85717 Starter ring gear screw (6 required) sold each . . . . . . . . . . . . . . . . . .$1.29

43102 Starter ring gear, 102-teeth, 1994-1997 Big Twins . . . . . . . . . . . . .$124.99

43107 Heavy duty starter ring gear, 66-teeth, 1990-1993 Big Twins . . . .$82.99

85722 Starter shaft extension pinion gear (sold each) . . . . . . . . . . . . . . . .$87.99

85728 Starter shaft pinion gear for Brute IV belt kits (sold each) . . . . . .$56.99

Primo ‘Brute V’ Belt Drive Kit with Motor PlatePrimo Belt Drives 14mm, 31/2" wide "SUPER STREET" primary belt drive is designed to handle allthe horses your big stroker can make. It's the first 31/2" wide, 14mm belt drive available. PRIMOintroduced the 14mm belt drive way back in 1973. Now you can get famous PRIMO quality and performance in a super wide 14mm belt drive for your Big Twin. Kits include polished outer pulley/belt cover. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$2,699.00• Features polished motor plate and performance clutch• Has 14mm strength and a 31/2" wide belt• Easy installation• Electric start667510 Fits Twin Cam 88® Softail® models from 2000 to present667511 Fits Evolution® Softail® models from 1990 thru 1999

Apparel

Bike Kits& Trailers

Seats & Bags

Foot Controls

Hand Controls

Lighting

Electrical

Exhaust

Intake

Engine

Gaskets

Tranny& Clutch

Driveline


Frames

Forks& Shocks

Sheet-metal

General

CrossReference

12.11

Primo Belt Drives


Primo ‘Brute III’ Belt Drive Kits for Twin Cam 88® and Evolution® Big Twin ModelsBrute III Kits are equipped with Primo Belt Drive's "dry-clutch" bas-ket/pulley assembly which retains diaphragm spring function whileincreasing clutch area almost 100%. The Brute III is ideal for all per-formance street or competition Big Twin model applications.

Complete Kits43101 Fits Softail® models from 1986 thru 1989 . . . . . . . . . .$758.99

43104 Fits Softail® and Dyna Glide models from 1990 thru 1993 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$759.99

43106 Fits Evolution® Softail® models from 1994 thru 1999, and Dyna Glide models from 1994 to present . . . . .$774.99

43131 Fits Twin Cam 88® Softail® models from 2000 to present . . . . . . . . . . . . . . . . . . . . . . . . . . . .$794.99

43100 Fits rubber-mount Big Twin models from 1986 thru 1989 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$758.99

43103 Fits rubber-mount Big Twin models from 1990 thru 1993 (except Dyna Glide models) . . . . . . . . . . . . . . . . . . . . . .$762.99

43105 Fits rubber-mount Big Twin models from 1994 to present (except Dyna Glide models) . . . . . . . . . . . . . . . . . . . . . .$772.99

Replacement Parts42873 Primary belt 8mm x 13/4", 130-teeth for rubber-mount

applications (except Dyna Glide models) . . . . . . . . . . .$99.99

42874 Primary belt 8mm x 13/4", 138-teeth for Softail®

and Dyna Glide applications . . . . . . . . . . . . . . . . . . . . . . .$99.99

85188 Clutch friction plate pack (6 plates) . . . . . . . . . . . . . . . .$74.99

85189 Clutch steel drive plate, .080"-thick (sold each) . . . . .$10.99

85190 Clutch steel drive plate, .047"-thick (sold each) . . . . .$10.99

86121 Starter ring gear, 1986 thru 1993 (sold each) . . . . . . .$58.99

86122 Starter ring gear, 1994-up (sold each) . . . . . . . . . . . . .$145.99

86123 Ring gear screws (set of 6) . . . . . . . . . . . . . . . . . . . . . . . . . .$1.29

Primo Belt Drive Kits for Panheads and ShovelheadsAll Primo belt pulleys are hard anodized for trouble-free operation, and the front pulleysare drilled and tapped for easy removal. The clutch dogs inside the rear pulleys are hard-ened and are then secured by two stainless steel rivets into the slotted clutch basket. Thefiberglass-reinforced rubber belt combines superior strength and heat transferring qualityand completes the Primo belt drive kits.84611 Fits 1965 thru 1978 models with electric start and closed primary

(11/2" x 8 mm) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$394.22

84612 Fits 1979-early 1984 models with electric start, closed primary and chain final drive(11/2" x 8 mm). Will not fit models with factory rear belt drive . . . . . . . . . . . . . . . .$394.22

84613 Fits 1955 thru 1964 models with kick start and closed primary (11/2" x 8 mm) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$278.99

071254 Fits 1955 thru 1964 with kick start and closed primary (11/2" x 11 mm) . . . . . . . .$304.99

84614 Fits 1965 thru 1977 models with kick start and closed primary (11/2" x 8 mm) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$278.99

84615 Fits 1978-early 1984 models with kick start and closed primary (11/2" x 8 mm) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$294.99

071206 Fits 1978-early 1984 models with electric start and closed primary (8 mm) for factory rear belt only . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$374.99

84616 Fits 1965-early 1984 models with electric start and closed primary (11/2" x 11 mm with idler) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$399.99

071256 Fits 1965-early 1984 models with kick start and closed primary (11/2" x 11 mm with idler) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$403.99

071200 Fits 1937 thru 1954 models with kick start and closed primary (11/2" x 8 mm) . .$299.99

84617 Fits 1937 thru 1954 models with kick start and open primary (3" x 8 mm) . . . . .$396.99

84618 Fits 1955-early 1984 models with kick start and open primary (3" x 8 mm) . . . .$441.99

071210 Fits 1955-early 1984 models with kick start and open primary (2" x 8 mm) . . . .$356.75

84612

8461884617

84615 84616

84613

Driv

eline

12.12

Primo Belt Drive Accessories

12


Primo ‘Equalizer’ Motor Plate KitThe slotted end permits mounting on adjustabletransmissions. The equalizer provides the need-ed support between engine and transmissionwhen you’re eliminating the inner primary foropen belt drive mounting. . . . . . . . . . . . . . . .$115.1984626 Fits open belt drives on Shovelhead

Big Twins from 1970 thru 1984

Primo Mainshaft Support Platefor Belt Final DriveFor Big Twins utilizing a secondary belt drive inconjunction with an open primary. This unitallows for the extra thickness of the rear beltdrive's front pulley and added transmissionmainshaft length. Includes bearing.42049 Fits 4-speed Big Twins from 1980

thru 1986 . . . . . . . . . . . . . . . . . . . . . . .$104.99

667528 Fits 5 and 6-speed Big Twins with kick starters . . . . . . . . . . . . . . . . . . . . .$149.99

Note: Will not work with the Equalizer motor plate.

Primo Offset Front Pulley InsertsTo permit custom motorcycle builders the free-dom to offset the transmission by allowing theuse of wider rear wheel/tire assemblies, the following offset inserts are available for Primofront pulleys. Special nuts and flanges (outsideguide) are required. The 2.5" inserts fit Brute IIIfront pulleys, the 3.5" inserts fit Brute IV pulleys.Offset 2.5" dia. 3.5" dia. Motor Nut

0.50" 86145 86150 861561.00" 86146 86151 861571.25" 86147 86152 861581.50" 86148 86153 861592.00" 86154 8616086144 Outside guide for offset pulleys . . .$26.79

86155 Special motor nut washer . . . . . . .$4.19

Clutch Domes Highly-polished parts provide a finished, customlook to open belt drives, and protection fromspinning parts. Fits Big Twins (except those withdiaphragm clutches) thru 1984. . . . . . . . . . .$37.9942042 Fits 5-finger clutch hubs (shown)42038 Fits 3-finger clutch hubs

84626

Outboard Bearing Support for Primo 'Brute IV' and 'Brute V' Belt DrivesEngineered and designed for extreme high per-formance applications or just plain good looks.You get both with Primo Belt Drives all new"Outboard Bearing support." Not just anotherpretty face, Primo's Outboard Bearing Supportprovides added rigidity and structural supportfor the 'Brute IV' and 'Brute V' open belt drive systems. . . . . . . . . . . . . . . . . . . . . . . . . . .$1,599.00667529 Outboard bearing support for ‘Brute V’667530 Outboard bearing support for ‘Brute V’

3D Flamed Guard for Primo'Brute IV' and 'Brute V'Primo's all new 3D Flamed belt guard keeps for-eign objects out of the belt drive and away fromthe pulleys. The enhanced three dimensionalcharacteristics of the guard allow you to cus-tomize it by applying paint or other effects tothe recessed areas to match your existing cus-tom paint job.667520 For 'Brute IV' . . . . . . . . . . . . . . . . . . . .$479.99

667521 For 'Brute V' . . . . . . . . . . . . . . . . . . . . .$479.99

Apparel

Bike Kits& Trailers

Seats & Bags

Foot Controls

Hand Controls

Lighting

Electrical

Exhaust

Intake

Engine

Gaskets

Tranny& Clutch

Driveline


Frames

Forks& Shocks

Sheet-metal

General

CrossReference

12.13

Primo Belt Drive Accessories


Primary/Transmission Offset Kits by PrimoNow you can offset the transmission and primary allowing the use of asuper-wide rear tire with these convenient offset kits!• Kits use an extra length transmission mainshaft and sprocket shaft

extension to move the primary drive components to the left either12mm, 25mm or 45mm

• Includes primary spacer ring, crankshaft extender and nut, extra lengthtransmission mainshaft, extra length main drive 5th gear with needlebearing and seal, extra wide pulley spacer, extra length clutch pushrod,jackshaft extended (for 25mm kit only), starter jackshaft spacer kit (for12mm kit only), front bearing support (for 45mm kit only) primary-to-transmission spacers and all necessary mounting hardware

• Wide swingarm and fender struts may be required for some applications

Fits Evolution® Big Twin models from 1991 thru 1999 and Twin Cam 88® Dyna Glide and Softail® models from 1999 to present667512 12mm (1/2") offset primary kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$612.61

667513 25mm (1") offset primary kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$636.88

667514 45mm (1.77") offset primary kit (includes front bearing support) . .$853.00

Pulley Covers for Primo ‘Brute IV’ and 'Brute V’ Belt DrivesBeautiful billet aluminum covers improve the appearance of your Primoopen belt drive. Includes covers, 1/4" transfer punch, #7 drill bit, 1/4-20 tap,and hardware.

Ball Milled 86266 For ‘Brute IV’ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$252.99

667525 For ‘Brute V’ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$289.99

Smooth 667527 For ‘Brute IV’ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$259.99

667524 For ‘Brute V’ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$289.99

667527

’Brute IV’ Belt Shrouds and Clutch Dome by PrimoBelt shrouds are made from billet aluminum. Available vented or solidand features pulley cut-outs for complete coverage. Clutch dome cov-ers the clutch basket and is made of spun aluminum. Sold each.

Vented Belt Shrouds42655 Polished . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$237.99

42656 Chrome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$264.99

Solid Belt Shrouds42688 Polished . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$202.99

86263 Chrome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$212.99

Clutch Dome42652 Chrome clutch dome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$35.29

Polished Alternator Rotor Cover86120 Polished alternator rotor cover . . . . . . . . . . . . . . . . . . . . . . .$27.99

86263

42655

Custom Engine NutReplace the stock nut on your belt drive with our acorn-style show-chrome version. . . . . . . . . . . . . . . . . .$16.4942041 Fits Big Twins from 1955 thru 1990

(without compensating sprocket)Note: These acorn engine nuts will not work with Karata belt drive kits.

Belt Shrouds for Primo 'Brute IV' and 'V' Belt DrivesChrome belt shroud improves appearance and adds safety. Includes mounting hardware.

Flamed667522 For 'Brute IV' . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$339.99

667523 For 'Brute V' . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$359.99

Plain86264 For 'Brute IV' . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$237.99

667526 For 'Brute V' . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$359.99

42652

86120

86266

Driv

eline

12.14

Kevin Darling's Boyce Pro Street

12


Original 4" Belt Drive071400 Fits FXR models from 1990 thru 2000 . . . . . . . . . . . . . . .$3,459.00

071410 Fits Evolution® Softail® models from 1990 thru 1999 $3,459.00

The Ultimate Open Primary Belt Drives! Monster 4" and 5"-wide belt drives make all others look weak by comparison. More than a great looking showpiece, these beauties are engineered to stand upto high horsepower applications. Ingenious outer support plate is solidly mounted to the inner motor plate creating a very strong cage for the belt drive. Theouter plate also features dual hidden bearing supports that hold the clutch hub rock steady. This caged design keeps stress off of the transmission bearing, andguarantees that everything stays in alignment. Machined from 6061 T-6 aluminum, then highly polished.Kevin Darling's Boyce Pro Street Belt Drives feature:• High quality Goodyear® belt• Complete Scorpion clutch assembly by Barnett• Dual hidden outer bearing support

671415

671413

671412

071410

Comp 4" and 5" Belt Drives671415 4" for Evolution® Softail® models

from 1990 thru 1999 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$3,849.00

671416 5" for Evolution® Softail® models from 1990 thru 1999 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$4,399.00

K-Nuk 4" and 5" Belt Drives671413 4" for Evolution® Softail® models

from 1990 thru 1999 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$3,849.00


Shank 4" and 5" Belt Drives671411 4" for Evolution® Softail® models

from 1990 thru 1999 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$3,849.00


Apparel

Bike Kits& Trailers

Seats & Bags

Foot Controls

Hand Controls

Lighting

Electrical

Exhaust

Intake

Engine

Gaskets

Tranny& Clutch

Driveline


Frames

Forks& Shocks

Sheet-metal

General

CrossReference

12.15

Primary Drive Belts


8mm

11mm Gates HTD® Rubber Primary Belts42517 11/2"-wide, 92-teeth. Fits CC belt drive kit

#42589 . . . . . . . . . . . . . . . . . . . . . . . . . . .$81.99

43037 11/2"-wide, 96-teeth. Replaces belt#30884 for Big Twins from 1936-early1984 with open or closed primaries, kick or electric start, and either 29/44-tooth or 28/44-tooth pulley combinations . . . . . . . . . . . . . . . . . . . . .$94.99

43038 11/2"-wide, 99-teeth. Replaces #1185 belt for Big Twins from 1936-early 1984 with open or closed primaries, kick or electric start, newer-style combinations with a 31/47-tooth pulley combination. Replacement belt for CC belt drive kits #42585, 42586, 42587, and 42588 . . . . . . . . . .$59.99

11mm13.8mm

HTD® and Poly Chain® are registered trademarks of the Gates Rubber Company. Note: The belts offered for sale on this page have no warranty whatsoever.

14mm

Replacement Kevlar® Primary Drive Belts by BDLA selection of primary drive belts to fit BDL ‘Bolt-In’ and Primo ‘Brute III’ belt drive kits.42873 42mm-wide, 8mm, 130-teeth. Fits CC belt drive kits #42670, 42671, 42672, 42673

and Primo Brute III belt drives for FXR, FLT, FLHT, FLHS and Road King® models with 68-tooth rear and 48-tooth front pulleys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$99.99

42874 41mm-wide, 8mm, 138-teeth. Fits CC belt drive kits #42518, 42519, 42520, 42674 and Primo Brute III belt drives for Softail® and Dyna Glide models with 68-tooth rear and 45-tooth front pulleys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$99.99

42875 38mm-wide, 8mm, 138-teeth. Fits CC belt drive kit #42521 with 68-tooth rear and 45-tooth front pulleys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$99.99

8.07mm

Supertorque® Replacement BeltsReplacement Goodyear® Supertorque® Kevlar®

belts. Used by some older aftermarket primarybelt drives such as Phase III.43137 13/4"-wide, 8.07mm, 132-teeth .$126.99

43138 3"-wide, 8mm, 140-teeth . . . . . . .$174.99

43139 4"-wide, 8mm, 140-teeth . . . . . . .$230.99

Note: The Goodyear, Supertorque and Kevlar registeredtrademarks are the property of their respective holders

14mm Gates HTD® Rubber Primary Belts43039 11/2"-wide, 78-teeth. Replaces #38078

belt for all Big Twin applications with a 24/37-tooth pulley combination using the Primo idler system . . . . .$146.99

13.8mm Gates HTD® Poly Chain®

Primary Belts43022 11/8"-wide, 78-teeth. Stock replace-

ment for the Harley-Davidson®

Original Equipment primary belt drives on 4-speed FL, FXB and FXSB models from 1980 thru 1983 (repl. OEM 40009-80) . . . . . . . . . . . .$139.99

43041 11/2"-wide, 78-teeth. Fits all Karata HTD® belt drives for Big Twins from1936-early 1984 with 4-speed trans-mission, open or closed primaries, and kick or electric start . . . . . . . . .$146.99

8.07mm Gates HTD® Rubber Primary Belts42611 11/2"-wide, 132-teeth . . . . . . . . . . . . .$74.99

8mm Gates HTD® Rubber Primary Belts43030 11/2"-wide, 117-teeth. Fits all Karata

HTD® belt drives for Sportster® modelsfrom 1971 thru 1981 with kick or electric start. Also replaces belt #37117-1 for Sportster® applications with 45/76-tooth pulleys . . . . . . . . . .$77.99

43032 11/2"-wide, 132-teeth. Fits all KarataHTD® belt drives for Big Twins withclosed primaries, and kick or electricstart from 1936-early 1984. Also re-places belt #30853-1-ST. Replacementbelt for CC belt drive #42524 . . . . . .$77.99

43033 11/2"-wide (Bullseye) belt, 132-teeth. Fits all Karata HTD® belt drives with tinprimaries, and replaces belt #30853-2-BEfor Big Twins with closed primary, andkick or electric start from 1936-early1984. Also replaces Phase III Bullseyebelt. Replacement belt for CC belt drive kits #42525, 42526, 42527, 42528, 42529 and 42530 . . . . . . . . . .$77.99

43034 11/2"-wide, 144-teeth. Replaces belt#37144-1 for Big Twins from 1936-early1984 with open or tin primaries, and47/76-tooth pulleys. Also replaces Phase III applications . . . . . . . . . . . . . .$84.99

42514 15/8"-wide, 141-teeth. Fits CC belt drive kit #42509 . . . . . . . . . . . . . . . . . .$66.49

42511 13/4"-wide, 132-teeth . . . . . . . . . . . . .$66.49

42512 13/4"-wide, 141-teeth . . . . . . . . . . . . .$66.49

43035 2"-wide, 144-teeth. Replaces #37144-2belt for Big Twins from 1936-early 1984with open primaries and 47/76-toothpulleys. . . . . . . . . . . . . . . . . . . . . . . . . .$111.49

42516 3"-wide, 132-teeth. . . . . . . . . . . . . . .$104.00

42515 3"-wide, 141-teeth. Fits CC belt drive kits #42536, 42537 and 42542 . . . .$104.00

43036 3"-wide, 144-teeth. Fits all Karata HTD®

belt drives for Big Twins from 1936-early1984 with open primaries. Also replacesbelt #37144-3 and Phase III applications.Replacement belt for CC belt drive kits#42533 and 42534 . . . . . . . . . . . . . . .$156.99

070970 135 tooth. Fits Brute IV on FXR and FLTmodels from 1990 to present . . . .$176.99

Dayco ‘Panther™’ 3" Primary BeltsFit 3"-wide, 8mm open belt drives in racing applications ONLY.42755 144-teeth . . . . . . . . . . . . . . . . . . . . . . .$131.99

42756 140-teeth . . . . . . . . . . . . . . . . . . . . . . .$131.99

42757 130-teeth . . . . . . . . . . . . . . . . . . . . . . .$131.99

42758 120-teeth . . . . . . . . . . . . . . . . . . . . . . .$131.99

Gates HTD® Replacement Primary Drive BeltsA wide selection of replacement primary drive belts to fit most belt drive units on the market today.All belts, whether HTD® Rubber belts or HTD® Poly Chain® belts, are manufactured by the GatesRubber Company. All CC replacement belts are listed showing their pitch, construction, width, number of teeth, and their most common applications.

Driv

eline

12.16

Chain Drive Primary Kits

12


Chain Drive Primary Kitsfor Big TwinsGreat for replacing internal stockprimary or for custom applications.Each kit includes a 24-tooth com-pensating sprocket, clutch hub,clutch pack, chain, adjuster, slidingcam and nut.

For Softail® and Dyna Glide Models from 1991 thru 199358590 Heavy-duty kit with Kevlar® clutch plates . . . . . . . . . . . . . . . . . . . .$859.99

58592 Stock replacement kit with organic clutch plates . . . . . . . . . . . . .$799.99

For Softail® and Dyna Glide Models from 1994 thru 199758582 Heavy-duty kit with Kevlar® clutch plates . . . . . . . . . . . . . . . . . . . .$859.99


For 1990 5-Speed Rubber-Mount Models ONLY58580 Heavy-duty kit with Kevlar® clutch plates . . . . . . . . . . . . . . . . . . . .$859.99


Chain Primary and Competitor Clutch Kits by Belt Drives LimitedBDL uses only the finest materials and workmanship in their chain primarykits and components, and is proud to offer their competitor clutch.Competitor Clutch features 9 springs and shoulder bolts for simple springadjustment, polished pressure plate and Kevlar® clutch plates.

Chain Drive Primary Kits42678 Fits Big Twins from 1990 to present. Includes Competitor Clutch,

basket, hub, ring gear, 1989-1993 pinion gear, 25-tooth splined front motor sprocket and a C.C. Rider® primary chain . . . . . . . .$829.99

42687 Fits Big Twins from 1986 thru 1989. Includes Competitor Clutch, basket, hub, ring gear, front sprocket and C.C. Rider® chain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$829.99

42679 Fits Big Twins with electric start from 1970-early 1984. IncludesCompetitor Clutch, basket, hub, ring gear, front sprocket and a C.C. Rider® primary chain. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$829.99

Competitor Clutch and Clutch Basket Kits42681 Fits electric start Big Twins from 1990 to present . . . . . . . . . . . . .$714.99

42891 Fits electric start Big Twins from 1986 thru 1989 . . . . . . . . . . . . . .$714.99

Clutch Basket ONLY42690 Fits Big Twins from 1990 to present . . . . . . . . . . . . . . . . . . . . . . . . . .$369.99

RevTech® Complete Primary Drive KitsThese kits have everything needed from the outer cover to the inner coverand all the parts in-between. Each kit includes: a chrome or black inner primary, chrome outer primary cover, RevTech® Kevlar® clutch, chain drivekit, inspection cover, derby cover, all mounting hardware, seals and gaskets. Custom bike builders who prefer the Kevlar® clutch can also use CC #’s 58650 or 58698 on 1998 and newer models, or CC #58653 for wide drive applications where lower primary drive ratio’s are desired.

Kits with Chrome Inner Primaries58650 Fits Softail® models from 1994 thru 1997 . . . . . . . . . . . . . . . . . . .$1,446.99

58652 Fits Softail® models from 1990 thru 1993 . . . . . . . . . . . . . . . . . . .$1,446.99

58653 Fits Softail® frames with 1" offset from 1989 thru 1993(requires the use of a CC #17284 Primary Spacer) . . . . . . . . . . .$1,408.99

Kits with Black Inner Primaries58698 Fits Softail® models from 1994 thru 1997 . . . . . . . . . . . . . . . . . . .$1,446.99

58699 Fits Softail® models from 1990 thru 1993 . . . . . . . . . . . . . . . . . . .$1,446.99

Primary Drive Replacement Hardware58670 Derby cover screw kit for models from 1989 thru 1993 . . . . . . . .$15.29

58671 Derby cover screw kit for models from 1994 thru 1996 . . . . . . . .$16.29

58673 Derby cover screw kit for models from 1997 thru 1998 . . . . . . . .$16.19

58683 Inspection cover screw kit for Softail® and Dyna Glide models from 1994 to present . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$12.29

58672 Inspection cover screw kit for Softail® and Dyna Glide models from 1993 thru 1994 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$10.99

58682 Inspection cover screw kit for Softail® and Dyna Glide models from 1989 thru 1992 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$13.39

58674 Outer primary mounting kit for Softail® and Dyna Wide Glide®

models from 1989 thru 1994 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$29.99

58685 Starter mounting kit for Big Twins from 1989 thru 1999 . . . . . . . .$3.79

58676 Inner primary mounting kit for Softail® models from 1989 thru 1994 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$19.99

Cal-Products Aluminum Inner Primary Covers These replacement inner primary covers from Cal-Products are made ofheat treated 356-T6 aluminum that is stress relieved to prevent cracking.Both castings have been reinforced making them “beefier” than originalequipment. Note: Because of their thicker than stock construction, some aftermarket belt drives mayrequire additional clearance.

250734 Fits Big Twins 1965-1969 (rear chain drive models only) . . . . . . .$396.99

250735 Fits Big Twins 1970-1982 (rear chain drive models only) . . . . . . .$396.99

250735

Apparel

Bike Kits& Trailers

Seats & Bags

Foot Controls

Hand Controls

Lighting

Electrical

Exhaust

Intake

Engine

Gaskets

Tranny& Clutch

Driveline


Frames

Forks& Shocks

Sheet-metal

General

CrossReference

12.17

Inner & Outer Primaries


Cast Late-Style Inner Primary Housings for Softail® and Dyna Glide ModelsPrecision-machined cast aluminum inner primary housings are polishedsmooth and chrome-plated for a brilliant finish. Also available with a rawcast finish which is ideal for custom painting, or black. Includes primarybearing, bushings, seals, and retaining ring.For Softail® ModelsFit all models from 1989 thru 1999.28821 Chrome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$429.99

28819 Black wrinkle (repl. OEMs 60630-90, 60630-94) . . . . . . . . . . . . . .$299.99

28822 Raw casting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$279.99

For Dyna Glide ModelsFit all models from 1991 to present.28831 Chrome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$429.99

28832 Black wrinkle (repl. OEM 60691-94) . . . . . . . . . . . . . . . . . . . . . . . . .$279.99

28833 Raw casting (repl. OEM 60663-95) . . . . . . . . . . . . . . . . . . . . . . . . . . .$269.99

Replacement Parts92200 Starter shaft bushing, 1989 thru 1993 (repl. OEM 33445-89) . . . .$4.69

75298 Original Equipment inner primary bushing for Big Twins from 1989 thru 1993 (repl. OEM 33445-89) . . . . . . . . . . . . . . . . . . . . .$9.59

92201 Starter shaft bushing 1994 thru 1999 (repl. OEM 33445-94) . . . . .$2.49

92205 Sleeve for starter shaft bushing 1989 to 1993 (pack of 5) . . . . . .$32.89

92203 Primary bearing (repl. OEM 9135) . . . . . . . . . . . . . . . . . . . . . . . . . . . .$26.99

58677 Inner primary mounting kit for 1989 thru 1993 Softail® models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$25.99

28823 Retaining ring for primary bearing (repl. OEM 60678-85) . . . . . .$10.00

Inner Primaries by DelkronCast from 356-T6 aluminum, these housings are ready-to-use with the starter bushing, oilseal, transmission shaft bearing and tensioner anchor plate already installed.17071 Fits Softail® models from 1994 thru 1999 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$298.39

17070 Fits Softail® models from 1990 thru 1993 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$298.39

17089 Fits FXR models from 1989 thru 1993 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$425.99

STEPPED

GROOVED

Ness-Tech® Chrome Billet Inner/Outer Primary SystemHere’s the ultimate billet inner/outer primary system. The curvaceousdesign changes the look of current primary system completely. Bothinner and outer primary covers are machined from 150 pound blocksof billet aluminum. These kits include chrome billet inner and outerprimary covers, two primary cover gaskets, and chrome hardware.04921 ‘Grooved’ for Softail® models from 1994 to present . . .$2,122.00

04922 ‘Stepped’ for Softail® models from 1989 thru 1993 . . . .$2,122.00

04923 ‘Stepped’ for Softail® models from 1994 to present . . .$2,122.00

04964 ‘Smooth’ for Softail® models from 1994 to present . . . .$2,122.00

04924 Replacement gasket kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$27.99

Driv

eline

12.18


12


Late-Style Outer Primary CoversChrome-plated, die-cast aluminum outer primary covers are designed to fit Softail®

and Dyna Glide models. Includes starter shaft bushing and features reinforcing ribsfor increased strength and rigidity.28820 3-hole cover fits Softail® and Dyna Glide models from 1995

to present (repl. OEM 60543-95) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$224.99

28860 5-hole cover fits Softail® and Dyna Glide models from 1999 to present (repl. OEM 60543-99) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$199.99

28077 Fits 1989 thru 1994 Softail® and Dyna Glide models (repl. OEM 60543-89) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$230.99

92213 Replacement starter shaft bushing from 1989 thru 1993 (repl. OEM 33446-89) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$4.99

92214 Replacement starter shaft bushing from 1994 to present (repl. OEM 33446-94) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$2.49

93632 Replacement magnetic drain plug (repl. OEM 739A) . . . . . . . . . . . . . . . . . .$12.49

Note: 5-hole outer primary cover (CC #28860) will also fit Softail® and Dyna Glide models from 1995 thru1998 with a 5-hole derby.

28860

Steel ‘Tin-Style’ Primaries for Electric-Start Big TwinsChromed-steel, inner and outer ‘tin-style’ primaries for 4-speed BigTwins from 1965-early 1984 with electric start and forward controls.Includes hardware and starter shaft bearing.Note: Will not work with diaphragm clutches.

Outer Covers28288 1965 thru 1969 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$97.49

28289 1970-early 1984 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$97.49

Inner Cover AdaptorPermits installation of early primaries (CC #’s 28286 or 28287) on 1970-early 1984 models when no electric starter is used.28282 Includes hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$79.49

28282

2828928288

2828028281

28286

Steel ‘Tin-Style’ Primaries for Kick-Start Big TwinsChrome-plated primaries for 4-speed Big Twins are accurate repro-ductions for Original Equipment applications. Mounting hardwareincluded.

Outer Covers28286 1936 thru 1954 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$88.49

28287 1955 thru 1964 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$88.49

Inner Covers28281 1936 thru 1954 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$79.49

28280 1955 thru 1964 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$79.49

28287

Alternator CoverUse on alternator Big Twin motors to protect your alternatorand help cool it by acting as a heat sink. Has mounting lugfor our belt shroud built in. Made of aluminum casting andhighly recommended for all open belt drive installations.Sold each. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$33.5942039 Highly polished finish

Apparel

Bike Kits& Trailers

Seats & Bags

Foot Controls

Hand Controls

Lighting

Electrical

Exhaust

Intake

Engine

Gaskets

Tranny& Clutch

Driveline


Frames

Forks& Shocks

Sheet-metal

General

CrossReference

12.19



’Diamond Grill’ Belt Drive Outer Primary CoversReinforced die-cast outer primaries for 4-speed Big Twins from 1970-early1984. FL cover has cast-in floorboard mounting tab. Show-chromed‘Diamond Grill’ venting provides cooling for belt drive. Complete withchrome hardware, starter shaft bearing and bearing spacers.28060 Fits 4-speed FX models from 1971-early 1984 . . . . . . . . . . . . . . . . .$199.99

28067 Fits 4-speed FL models from 1970-early 1984 . . . . . . . . . . . . . . . . .$199.99

15156 Replacement derby cover with screws . . . . . . . . . . . . . . . . . . . . . . . .$23.19

98835 Diamond Grill inspection cover with screws . . . . . . . . . . . . . . . . . . .$21.29

Chrome Vented Primary CoversThese covers are designed exclusively for use with aftermarket primary beltdrive units that have belts up to 13/4"-wide including our BDL ‘Bolt-In’ kits(CC #’s 42519, 42520) and our Primo ‘Brute III’ kits (CC #’s 43104, 43106).They feature numerous vent slots for improved air flow to keep your beltdrive running cool and promote extended belt life. . . . . . . . . . . . . . . . .$196.9928871 Fits all Softail® and Dyna Glide models from 1995 thru 1998Note: CC #28871 may also be installed on Softail® and Dyna Glide models from 1999 to presentif a 3-hole derby cover is purchased and installed in place of the Original Equipment part.

Slotted Primary Cover for Big TwinsThis vented cover provides additional cooling and a custom look. Starter bearing not included . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$148.99250703 Fits 4-speed Big Twins 1970-early 1984 with primary belt drive

28065

28801

Cast Early-Style Chrome Outer Primary CoversReinforced outer primary covers for 4-speed Big Twin and 5-speed Softail®

models from 1970 thru 1988. The starter shaft support bearing is installedand additional thrust washers are provided for belt and chain drive. Readyto mount on 8-hole primaries with flat boss for ninth hole. FL cover hasfloorboard mounting tab. Chrome hardware included.28065 Fits 4-speed FX and 5-speed Softail® models from 1971 thru 1988

(small dowel pins) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$164.99

251705 Cover without bearing. Fits 4-speed FX and 5-speed Softail®

models from 1971 thru 1988 (small dowel pins) . . . . . . . . . . . . . .$149.99

28066 Fits 4-speed FL models from 1970 thru 1984 with chain final drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$164.99

250725 Fits FXST models from 1986 thru 1988. Replaces OEM 60507-86A. (Cover is machined for O-ring derby cover seal and large diameter alignment pins) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$149.99

Cast Early-Style Chrome Inner Primary HousingFeatures precision-machining, thick wall die-cast aluminum, and reinforcedstarter and mainshaft bearing support areas. Machined at front mountingblocks for exact adjustment on various engine/transmission combinations.Accepts early or late starter mounts. systems. Installed oil line fittings andbushing for thru-the-case shifters. Complete kit includes alternator O-ring,brass oil line fittings, chain adjuster retaining shoe with hardware, andchromed Bendix starter drive pivot bolt. Fits 4-speed Big Twins from 1970-early 1979 and late 1979 thru 1982 models with Prestolite starter and chainfinal drive.28801 Complete inner primary kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$529.99

28063 Inner primary housing ONLY (without kit) . . . . . . . . . . . . . . . . . . .$441.79

28802 Inner primary hardware kit ONLY . . . . . . . . . . . . . . . . . . . . . . . . . . . .$82.19

Primary Cover Mounting PartsReplacement parts including a set of 15 chrome sockethead screws tomount primary cover, derby cover and inspection plate on 4-speed BigTwins from 1965-early 1984.28817 Chrome screw set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$15.99

28818 Bronze starter thrust washers (replaces OEM 31502-65) sold in pairs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$6.69

28074 Starter shaft bearing (replaces OEM 9063) sold each . . . . . . . . . . .$6.49

Primary Chain Housing Top ScrewFits inner primary on 4-speed Big Twins from 1965 thru 1986.28811 Replaces OEM 31478-65A (pack of 5) . . . . . . . . . . . . . . . . . . . . . . . . .$47.39

Primary Chain Oiler FittingFits inner primary on 4-speed Big Twins from 1965-early 1984.28813 Replaces OEM 60549-70 (pack of 5) . . . . . . . . . . . . . . . . . . . . . . . . . . .$41.09

Oil Line and Vent Hose FittingUsed throughout the motorcycle, but commonly on inner primary as a ventreturn.28815 Replaces OEM 63533-41 (pack of 5) . . . . . . . . . . . . . . . . . . . . . . . . . . .$14.49

Chain Tensioner Plate and Nut KitFits 4- and 5-speed Big Twins with primary chain from 1965 thru 1989.28816 Replaces OEMs 39992-65A, 39998-65 and 1783 . . . . . . . . . . . . . . .$55.19

Note: CC #12282 adjuster shoe fits the above plate.

28066Detail

Driv

eline

12.20

Primary Spacers

12


Offset Transmission PlatesThese 1-inch offset mounting plates for 5-speedSoftail® transmissions, make assembly of WideDrive swingarm or extra wide rigid-framed cus-toms a snap. The hot set-up for building thatextra-wide ride.17285 Chrome mounting plate . . . . . . . . . .$36.59

17286 Raw steel mounting plate . . . . . . . . .$25.09

1/4" Offset Driveline KitIn addition to a chrome primary spacer this kitincludes a chrome transmission plate, bolts, O-rings, sprocket shaft spacer and rear pulley spacer. Permits the use of 1/2" wider tires in a stock chassis. . . . . . . . . . . . . . . . . . . . . . . . . . . . .$142.4917289 Fits Softail® models from 1986 thru 1999

Engine-to-Primary SpacersThese aluminum spacers permit the use of thelatest extra-wide rear tires with custom frame applications. . . . . . . . . . . . . . .from $82.19 to $167.99

Raw Finish Chrome

17287 17282 1/4" offsetn/a 17442 3/8" offset

17288 17283 1/2" offsetn/a 17443 3/4" offset

95148 17284 1" offset17270 17529 11/2" offset17379* 17444 45mm offset

*CC #17379 has a polished finish

Ness-Tech® Primary Spacer KitSpaces the primary out 1/2". Includes o-rings,longer bolts and billet spacer. . . . . . . . . . . . .$108.4905798 For primary set-ups to run up to

200-series wide tires on custom frames

Primary/Transmission Offset Kits by PrimoNow you can offset the transmission and primary allowing the use of asuper-wide rear tire with these convenient offset kits!• Kits use an extra length transmission mainshaft and sprocket shaft

extension to move the primary drive components to the left either12mm, 25mm or 45mm

• Includes primary spacer ring, crankshaft extender and nut, extra lengthtransmission mainshaft, extra length main drive 5th gear with needlebearing and seal, extra wide pulley spacer, extra length clutch pushrod,jackshaft extended (for 25mm kit only), starter jackshaft spacer kit (for12mm kit only), front bearing support (for 45mm kit only) primary-to-transmission spacers and all necessary mounting hardware

• Wide swingarm and fender struts may be required for some applications

Fits Evolution® Big Twin models from 1991 thru 1999 and Twin Cam 88® Dyna Glide and Softail® models from 1999 to present667512 12mm (1/2") offset primary kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$612.61

667513 25mm (1") offset primary kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$636.88

667514 45mm (1.77") offset primary kit (includes front bearing support) . .$853.00

Offset Kits for Twin Cam 88® Softail® ModelsThese kits move the primary and the rear belt position 20mm or 25mm outward to provide clearance for larger tires, while leaving the engine inits original position. Includes precision mainshaft, clutch pushrod, specialstarter bushing, primary spacer and hardware kit. Fit all Softail® modelsfrom 2000 to present.86615 20mm offset kit (shown) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$1,223.00

686216 25mm offset kit (uses the Original Equipment pulley, but includes a longer mainshaft 5th gear) . . . . . . . . . . . . . . . . . . . . . .$1,499.00

86615

Apparel

Bike Kits& Trailers

Seats & Bags

Foot Controls

Hand Controls

Lighting

Electrical

Exhaust

Intake

Engine

Gaskets

Tranny& Clutch

Driveline


Frames

Forks& Shocks

Sheet-metal

General

CrossReference

12.21

Primary Accessories


250750 500428

250751

Primary Case Plugs for Sportster® ModelsChrome oil fill and clutch adjustment hole plugs for Sportster® models from 1971 thru1990. Available with stock type slotted or custom hex heads. Sold each.

Slotted Plugs250751 Oil fill and clutch adjusting hole plug (13/8"-12) for Sportster®

models from 1977 thru 1985 (repl. OEM 34742-77A) . . . . . . . . . . . . . . . . . . . . . . . .$18.99

250750 Oil fill and clutch adjusting hole plug for Sportster® models from 1986 thru 1990 (repl. OEMs 25465-86, 34742-86) . . . . . . . . . . . . . . . . . . . . . . .$18.99

Hex Head Plugs500428 Oil fill and clutch adjusting hole plug for Sportster® models

from 1986 thru 1990 (repl. OEMs 25465-86, 34742-86) . . . . . . . . . . . . . . . . . . . . . . .$23.49

Colony Chrome Hex Head Filler Plugs and CapsDesigned for easy installation and removal with a standard15/16" wrench.36061 Primary filler cap for Sportster® models

from 1971 thru 1976 . . . . . . . . . . . . . . . . . . . . . . . . . . .$25.39

36060 Clutch adjusting hole cap for Sportster® models from 1971 thru 1976 . . . . . . . . . . . . . . . . . . . . . . . . . . .$25.39

36059 Primary filler cap or clutch adjusting hole cap for Sportster® models from 1977 thru 1985 (replaces OEM 34742-77B) sold each . . . . . . . . . . . .$29.49

36252 Primary filler cap or clutch adjusting hole cap for Sportster® models from 1986 thru 1990 (two required per motor) sold each . . . . . . . . . . . . .$29.49

Timing and Transmission Filler PlugsFits Big Twin and Sportster® timing holes and oil tanks with a 5/8"-18 thread. Also fits the transmission filler hole on all 45s thru 1940.36186 Chrome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$9.49

Inner Primary Mounting KitIncludes stainless steel inside bolts with locktabs and pins, and chrome outer bolts with chrome washers. . . . . . . . . .$25.9958677 Fits Softail® models from 1989 thru 1993

25305

28815

28813 25308

25333

Inner Primary Accessories28815 Vent hose fitting (repl. OEM 63533-41) pack of 5 . . . . . . . . . . . . . . . . . . . . . . . . . . .$14.49

28813 Chain oiler fitting (repl. OEM 60549-70) pack of 5 . . . . . . . . . . . . . . . . . . . . . . . . . . .$41.09

25308 Mainshaft seal (repl. OEM 12018) pack of 10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$19.99

54073 Mainshaft seal (repl. OEM 12052) pack of 5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$13.99

25333 Shifter shaft seal (repl. OEM 60641-74) pack of 5 . . . . . . . . . . . . . . . . . . . . . . . . . . . .$10.99

54008 Shifter shaft seal (repl. OEM 11148) pack of 5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$9.49

25305 Alternator O-ring (repl. OEM 11125) pack of 10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$28.59

54007 Alternator O-ring (repl. OEM 11147) pack of 10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$15.49

Magnetic Drain Plugand WasherFor Original Equipment or CC innerprimaries. Fits 4-speed Big Twins1965 thru 1986.28812 Replaces OEM

60348-65A (bag of 5) . . . . . . . .$38.19

48231

48263

Chrome Inner Primary Cover Trims by KüryAkyn™

These easily-installed chrome accents give the look of a fully chrome-plated inner primary for a fraction of the cost. Because of the die-cast construction, a much more precise fit, and a classier three-dimensional look results. Nicely formed edges give thesecovers a creamy, flowing appearance that enhances the entire primary area. Four mount-ing points permit easy installation in minutes and ensure secure, quiet operation (notcompatible with rear suspension lowering kits).48231 Fits Softail® models from 1989 to present (except FLSTS models) . . . . . . . . . . . . .$98.89

48261 Fits Dyna Glide models (except FXDWG) from 1991 thru 1999 . . . . . . . . . . . . . . .$89.99

48262 Fits Dyna Wide Glide® models from 1993 thru 1999 . . . . . . . . . . . . . . . . . . . . . . . . .$89.99

48263 Fits FLT, FLHT, FLHS and Road King® models from 1990 to present . . . . . . . . . . .$89.99

Primary Case Saver for Big TwinsThis simple yet effectivedevice fits over the innerprimary starter boss andprotects it from damagecaused by a loose or wornrear chain. Especially effec-tive on lowered or custombikes. Snap on application -no modifications required.Fits all 4-speed Big Twins1965-1984.250731 . . . . . . . . . . . . .$23.19

Driv

eline

12.22

12


Compensating Sprockets

Compensating Sprocket AssembliesReplace your worn out Original Equipment unit with one of these complete assemblies.

Complete AssembliesEach of these assemblies includes the shaft extension, cover with springs, sliding cam,engine nut and sprocket. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$144.99 to $149.9914241 25-tooth for all Big Twin models from 1994 to present14249 Same as CC #14241 with 1" offset14235 24-tooth for Softail models from 1991 thru 199314236 Same as CC #14235 with 1" offset14238 24-tooth for Softail® models from 1985 thru 199014231 24-tooth for 5-speed rubber-mount models from 1985 thru 1990

Cover Assemblies with SpringsAvailable for most models from 1985 to present. . . . . . . . . . . . . . . . . . . . . . . . . . $47.29 to $54.9914233 Fits 5-speed rubber-mount models from 1985 thru 1990 (repl. OEM 40267-85)14240 Fits Softail® models from 1985 thru 1990 (repl. OEM 40384-83A)14237 Fits all Big Twins from 1991 to present (repl. OEM 40384-91)

Compensating Sprocket ComponentsRestore your compensating sprocket to peak performance. Fit mostBig Twins with primary chain from 1970 to present.

Sliding Cams for Big Twins12222 Fits most models from 1970 thru 1983

(repl. OEM 40299-70) . . . . . . . . . . . . . . . . . . . . . . . . . .$28.49

12764 Fits all models from 1985 to present (repl. OEM 40299-83A) . . . . . . . . . . . . . . . . . . . . . . . . .$27.39

Sprocket Nut for Big Twins from 1970 thru 199012112 Stock length (repl. OEM 40392-70) . . . . . . . . . . . . .$10.99

14245 1" extended (repl. OEM 40392-70) . . . . . . . . . . . . . .$20.69

14246 1/2" extended (repl. OEM 40392-70) . . . . . . . . . . . .$19.44

Sprocket Nut for Big Twins from 1991 to Present12078 Stock length (repl. OEM 40392-91) . . . . . . . . . . . . . .$4.99

14247 1" extended (repl. OEM 40392-91) . . . . . . . . . . . . . .$20.69

14248 1/2" extended (repl. OEM 40392-91) . . . . . . . . . . . .$19.44

Compensating Sprockets for Big Twins from Late 1970 thru 198612218 22-tooth (repl. OEM 40280-70) . . . . . . . . . . . . . . . . .$59.54

12232 23-tooth (repl. OEM 40282-70) . . . . . . . . . . . . . . . . .$59.54

12233 24-tooth (repl. OEM 40275-70) . . . . . . . . . . . . . . . . .$59.54

Compensating Sprockets for Big Twins from 1985 to Present14234 24-tooth for Softail® models 1991 thru 1993

and 5-speed rubber-mount models from 1985 thru 1990 (repl. OEM 40269-85A) . . . . . . . . . . . . . . .$60.69

14242 25-tooth for all Big Twin models from 1994 to present (repl. OEM 40308-94) . . . . . . . . . . . . . . . .$60.69

Sprocket Shaft Extensions20306 Stock length for 4-speed Big Twins from late 1970

thru 1983, 5-speed Big Twins from 1980-early 1984 and Softail® models from 1984 thru 1990 (repl. OEM 40375-70) . . . . . . . . . . . . . . . . . . . . . . . . . .$49.99

14232 Stock length for Softail® models from 1991 to present and 5-speed rubber-mount Big Twin models from 1985 thru 1990 (repl. OEM 40266-85) . . . . . . . . . . . . . . . . . . . . . . . . . .$32.09

14244 1/2" extended for 5-speed rubber-mount Big Twin models from 1985 thru 1990 (repl. OEM 40266-85) . . . . . . . . . . . . . . . . . . . . . . . . . .$31.89

14243 1" extended for 5-speed rubber-mount Big Twin models from 1985 thru 1990 (repl. OEM 40266-85) . . . . . . . . . . . . . . . . . . . . . . . . . .$40.29

95150 1" extended for Softail® models from 1991 to present (repl. OEM 40266-85) . . . . . . . . . . . . . . .$111.99

080075 .500" extended for Softail® models from 1985 thru 1990 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$69.99

080076 .500" extended for Softail® models from 1991 to present and FXR and Touring models from 1985 to present . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$69.99

Vibration Dampers for Big Twin and Sportster® ModelsFisher Concepts vibration dampers for both chain and belt primary Big Twin, Sportster®,and Buell® motors. Each unit includes the damper unit and a custom sprocket or pulley.Stock compensators are eliminated on Big Twin models to ensure the accurate alignmentof the primary drive.

For Chain Primary Drive47503 25-tooth sprocket for Big Twin models from 1994 to present . . . . . . . . . . . . . .$399.99

47504 24-tooth sprocket for rubber-mounted Big Twins from 1984 thru 1993 and Softail® models from 1991 thru 1993 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$399.99

47505 24-tooth sprocket for Softail® models and Shovelheads from 1972 thru 1990 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$399.99

47501 35-tooth sprocket for 5-speed sportster® models from 1991 thru 2003, and Buell® models from 1991 thru 2003 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$399.99

47502 34-tooth sprocket for 4-speed Sportster® models from 1977 thru 1990 . . . . .$399.99

For Chain Primary Drive with 1" Offset647506 25-tooth sprocket for Big Twin models from 1994 to present . . . . . . . . . . . . . .$439.99

For Belt Primary Drive47512 For 13/4"and 2"-wide primary belt drive systems . . . . . . . . . . . . . . . . . . . . . . . . . . .$349.99

47513 For 3"-wide primary belt drive systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$349.99

12222

12218

12112

2030614246

Apparel

Bike Kits& Trailers

Seats & Bags

Foot Controls

Hand Controls

Lighting

Electrical

Exhaust

Intake

Engine

Gaskets

Tranny& Clutch

Driveline


Frames

Forks& Shocks

Sheet-metal

General

CrossReference

12.23

Engine Sprockets


Compensating Sprocket ShaftExtension and Spacer Kits by Daytec™

Works in conjunction with engine-to-primary spacers.Fits most Big Twin engines. Includes sprocket nut.38650 1/2" sprocket kit for 180 / 200 frames . . .$139.94

32263 1 7/16" sprocket kit for 230 / 250 frames .$147.99

38641 Engine / primary spacer kit for 180 / 200 frames . . . . . . . . . . . . . . . . . . . . . .$102.99

32264 Engine / primary spacer kit for 230 / 250 frames . . . . . . . . . . . . . . . . . . . . . .$188.24

Offset Sprocket Kits for 4-Speed Big Twin ModelsThe perfect answer for problems posed by the mounting of custom wide rear tires orwheels. Includes offset transmission sprocket, precision machined rear sprocket spacerplate and hardware. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$39.4925657 Kit with 22-tooth sprocket25598 Kit with 23-tooth sprocket25599 Kit with 24-tooth sprocket

Replacement SprocketsSpecifically for the kits listed above. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$14.9918385 22-tooth18386 23-tooth18387 24-toothNote: Designed to ease problemsencountered on some customapplications. 1979 through 1985FX models require substantialmodifications includingchangeover to a Prestolite starter.Custom Chrome® will happily pro-vide a detailed instruction sheetbefore your purchase so that youcan better determine its benefitsfor your particular application.

100168

070812 500610

Custom Sprocket NutsChrome acorn style sprocket shaft nuts for Big Twinsand Sportster®. Sold each.070812 Fits Big Twin models from 1936

thru 1954 (11/16"-18) . . . . . . . . . . . . . . . . .$10.99

070813 Fits Big Twin models without com-pensating sprocket from 1955 to present (7/8"-14) . . . . . . . . . . . . . . . . . . .$16.99

070814 Fits Sportster® models from 1957 thru 2003 (3/4"-16) . . . . . . . . . . . . . . . . . . . .$9.99

Stock Type Motor Sprocket Nuts500610 Fits Big Twin models from 1930

thru 1954 (11/16"-18) . . . . . . . . . . . . . . . . . .$8.84

Sprocket Nut Lock Tabs100168 Fits 5-speed Big Twins from 1980 thru 1984

(repl. OEM 33335-79) pack of 10 . . . . . . . .$7.99

25396 Fits 4-speed Big Twins from 1941-early 1983(repl. OEM 35216-36) pack of 10 . . . . . . . .$5.84

Motor Sprocket Nut and WasherFits Big Twins 1955 to present.250971 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$25.99

Motor Sprockets for Big Twin Models

17382

17384

TaperedFit Big Twins from 1936 thru 1954.17382 23 tooth . . . . . . . . . .$22.99

17383 24 tooth . . . . . . . . . .$22.99

18336 25 tooth . . . . . . . . . .$24.49

SplinedFit Big Twins from 1955 thru 1984.17384 23 tooth . . . . . . . . . .$22.99

17385 24 tooth . . . . . . . . . .$22.99

18337 25 tooth . . . . . . . . . .$24.49

Driv

eline

12.24

Primary Chain & Tensioners

12


C.C. Rider® Primary ChainsC.C. Rider® chain’s are manufactured to withstand the heavy-duty demands of theHarley-Davidson® engine. These competitively priced double and triple row chains will fitmost applications.17415 82-link double row chain for 4-speed Big Twins thru 1986 and Dyna Glide

and Softail® models from 1984 to present (repl. OEM 40007-36A) . . . . . . . . . . .$51.99

17416 76-link double row chain for 5-speed Big Twins (except Dyna Glide and Softail® models) from 1980 to present (repl. OEM 40037-79) . . . . . . . . . . . .$48.99

17417 94-link triple row chain for Sportster® models from 1957 thru 2003 (repl. OEM 40005-57) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$53.99

33039

33036

Motor Factory® Primary Chainsby Diamond®

Premium quality, made in USA endless primary chains for Big Twin and Sportster® models.33035 82-link double row chain for 4-speed Big Twins thru

1986 and Dyna Glide and Softail® models from 1984 to present (repl. OEM 40007-36A) . . . . . . . . . . . . . . .$63.44

33039 76-link double row chain for 5-speed Big Twins (except Dyna Glide and Softail® models) from 1980 to present (repl. OEM 40037-79) . . . . . . . . . . . . . . . . . . . . . . . . . . .$58.54

33036 94-link triple row chain for Sportster® models from 1957 thru 2003 (repl. OEM 40005-57) . . . . . .$58.39

H-B 125 Hydraulic Automatic Primary Chain Tensioner by Oregon Hot BikeDesigned to withstand the punishment that 100+ cubic inch engines deliverto the primary drive. Unlike the standard chain tensioner that works off ofa spring pressure, this unit operates off of primary fluid and works similarto the hydraulic lifter in an engine. It is completely self-contained. Onceinstalled, there is no need to adjust the primary chain again.• Reduces vibration• Reduces chain wear • Reduces chain rebound • Designed for high-horsepower engines• Smoother shifting• Prevents chain from scoring inner parts of primary (a main cause of

primary fluid contamination) 60119 Fits Big Twins with wet primary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$104.99

Primary Chain Adjuster Assembly070186 Fits KH, XL, XLH models from 1954 thru 1976,

and XLCH models from 1970 thru 1976 (repl. OEM 39975-52B) . . . . . . . . . . . . . . . . . . . . . . . . . .$18.99

Premium® Inner Primary Mainshaft BearingFits 4-speed Big Twins 1965-early 1984. High quality ‘sealed-type’ replacement bearing has built-in lubrication and sideseals to keep dirt and grime out.20015 Replaces OEM 9061 (sold each) . . . . . . . . . . . . . . . . .$18.99

Apparel

Bike Kits& Trailers

Seats & Bags

Foot Controls

Hand Controls

Lighting

Electrical

Exhaust

Intake

Engine

Gaskets

Tranny& Clutch

Driveline


Frames

Forks& Shocks

Sheet-metal

General

CrossReference

12.25

Primary Chain Tensioners


12240

12157

12156

070183

070179

Primary Chain Adjuster Linings and Retainers for Sportster® Models070183 Adjuster lining kit for Sportster® models from 1958 thru 1976. Includes

lining and retainer (repl. OEMs 39978-58, 39979-58A . . . . . . . .$11.49

070179 Retainer ONLY for Sportster® models from 1958 thru 1976 (repl. OEM 39979-58A) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$1.99

Hayden M6 Primary Chain TensionersKeeps proper tension on the primary chain for smoother shifts, reducedvibration and increased primary chain and sprocket life. Easy installation.All required parts except primary gasket included.12171 Fits all Big Twin models from 2001 to present . . . . . . . . . . . . . . .$98.99

12240 Fits all Big Twin models (including Twin Cam 88® models) from 1965 thru 2000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$98.99

12157 Fits 5-speed Sportster® models from 1991 thru 2003 . . . . . . . . .$98.99

12156 Fits 4-speed Sportster® models from 1977 thru 1990 . . . . . . . . .$98.99

Replacement Parts12155 Replacement shoe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $12.94

070241 Spring set for Big Twins from 1965 to present and Sportster®

models from 1977 thru 1990 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$14.99

070242 Guide plates for Big Twins from 1965 to present . . . . . . . . . . . .$67.99

070243 Shim pack for Big Twins from 1965 thru 1993 . . . . . . . . . . . . . . .$14.99

070244 Shim pack for Big Twins from 1994 to present . . . . . . . . . . . . . . .$14.99

12297

12282

12281

17069

Primary Chain Adjusters and PartsHigh-quality reproductions of their Original Equipment counterpartsdesigned for years of faithful service.

Primary Chain Adjuster Plate KitIncludes inner and outer plates, and hardware, and replaces OEMs 39992-65C, 39998-65, and 1783.17065 Fits all Big Twins from 1965 to present . . . . . . . . . . . . . . . . . . . . .$26.99

Adjusting ShoesFit most models from 1957 to present. Sold each.12281 Fits Sportster® models from 1957 thru 1976

(replaces OEM 39978-58) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$4.99

12297 Fits Sportster® models from 1977 thru 1990 (replaces OEM 39966-80) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$6.69

12282 Fits Big Twin models from 1965 to present (replaces OEM 39976-65B) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$6.99

Adjusting Plate ComponentsFit Original Equipment and Custom Chrome® inner primaries on Big Twinmodels from 1965 to present.17069 Inner chain tensioner (repl. OEM 39990-65) . . . . . . . . . . . . . . . . .$35.37

17068 Outer tensioner plate (repl. OEM 39993-65) . . . . . . . . . . . . . . . . . .$7.19

17431 Tensioner bolt kit (repl. OEM 39992-65C) . . . . . . . . . . . . . . . . . . . . .$4.89

1706517431

Chain Adjuster Brace for Sportster® ModelsFits KH, XL, XLH models from 1954 thru 1976, and XLCH models from 1970 thru 1977. Sold each. . . . . . . . . . . . . . . . . . . . . . . . . . .$8.99070188 Replaces OEM 39980-54

Driv

eline

12.26

Transmission Sprockets & Pulleys

12


Premium® Transmission SprocketsPrecision-machined American-made transmission sprock-ets are plated for corrosion resistance and fully hard-ened for maximum service and performance.

For Big Twins from 1936 thru 1979 . . . . . . . . .$20.7926418 22 tooth (repl. OEM 35203-36)12226 23 tooth (repl. OEM 35212-73)12227 24 tooth12228 25 tooth12229 26 tooth

For Big Twins with 4-Speed Transmissions from 1980 thru 1985 . . . . . . . . . . . . . . . . . . . . . . . .$19.9912220 22 tooth (repl. OEM 33338-83)12221 23 tooth (repl. OEM 33337-83)12223 24 tooth12224 25 tooth

For Sportster® and K Models 1954-1979 . . .$25.99080119 19 tooth (repl. OEM 35197-52)12230 21 tooth (repl. OEM 35205-52A)12231 22 tooth18334 23 tooth18335 24 tooth

For Sportster® Models from 1979-1984 . . . . .$25.9918340 21 tooth (repl. OEM 35205-79A)18341 22 tooth18342 23 tooth

For Sportster® Models from 1984-1990 . . . . .$20.9918345 21 tooth (repl. OEM 35208-84)18346 22 tooth18347 23 tooth

For 5-Speed Evolution® Sportster® Models from 1991 thru 1992 . . . . . . . . . . . . . . . . . . . . . . . .$38.9918355 21 tooth (repl. OEM 37709-89)18356 22 tooth18357 23 tooth

Heavy-Duty Transmission SprocketsHigh-quality imported transmission sprockets provide alower-cost alternative to our American-made Premium®

transmission sprockets. Plated for corrosion resistanceand fully hardened for maximum service.

For Big Twins from 1936 thru 1979 . . . . . . . . .$14.8918360 22 tooth (repl. OEM 35203-36)18361 23 tooth (repl. OEM 35212-73)18362 24 tooth18363 25 tooth18364 26 tooth

For Big Twins with 4-Speed Transmissions from 1980 thru 1985 . . . . . . . . . . . . . . . . . . . . . . . .$15.4918365 22 tooth (repl. OEM 33338-83)18366 23 tooth (repl. OEM 33337-83)18367 24 tooth18368 25 tooth

For Big Twins with 5-Speed Transmissions from 1980 thru 1984 . . . . . . . . . . . . . . . . . . . . . . . .$15.4918369 22 tooth (repl. OEM 33336-83)18370 23 tooth18371 24 tooth

For Sportster® and K Models 1954-1979 . . .$16.9918382 20 tooth18378 21 tooth (repl. OEM 35205-52A)18379 22 tooth18380 23 tooth18381 24 tooth

For Sportster® Models from 1979-1984 . . . . .$16.9918372 21 tooth (repl. OEM 35205-79A)18373 22 tooth18374 24 tooth

For Sportster® Models from 1984-1990 . . . . .$16.9918375 21 tooth (repl. OEM 35208-84T)18376 22 tooth18377 23 tooth

1954-E1979XL MODELS

L1979-E1984XL MODELS

L1984-1990XL MODELS

1936-19794-SPEED

1980-19854-SPEED

1980-19845-SPEED

Mainshaft SprocketSpacersGet the proper clearance betweenthe transmission sprocket and caseon 1980 and later 4-speed chaindrive models, and earlier styletransmissions in conjunction withaftermarket sprockets. . . . . .$10.9912225 Replaces OEM 35079-80

(pack of 5)

Belt to Offset SprocketConversion Kit for 5-Speed Big TwinsInstall 150-series tires on 5-speedBig Twin models by convertingfrom belt to chain drive. Offset 24-tooth front sprocket and spacermoves the rear drive chain awayfrom the tire. The stock final driveratio on 5-speed models is 2.1875.Installation in conjunction with a51-tooth rear sprocket will changethe ratio to 2.125, with a 48-toothrear sprocket it will lower to 2.000which is ideal for stroker motors.Fits Softail® models from 1986 topresent when used with 1973 thru1985 4-speed rear sprockets, andFXR models from 1985 thru 1994when used with rear sprocketsoriginally for FXR’s. . . . . . . .$67.9925658 Kit with 24-tooth sprocket

080198

Transmission Pulleys for Big TwinsStock style replacement pulleysavailable with 30, 32 (stock) or 34 teeth. Steel construction.

For 5-Speed Big Twins from 1985 thru 1993080194 30 tooth . . . . . . . . . . .$48.49

080195 32 tooth (replaces OEM 40210-85B) . . .$52.99

080196 34 tooth . . . . . . . . . . .$48.49

For 5-Speed Big Twins from 1994 to Present080198 32 tooth (replaces

OEM 40250-94) . . . .$60.49

Offset Pulleys with 30-Teeth for Models from 2002 thru 2003 . . . . . . . . . . . . . . . . .Call for price687028 8mm offset687030 28mm offset687032 33mm offset687034 38mm offset687036 42mm offset687038 55mm offset

Offset Pulleys for V-Rod® Models by Rick’sOffset pulleys with 30 or 28 teeth for V-Rod® models.Available in different offsets from 8mm up to 55mm.Sold each. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Call for price

Offset Pulleys with 30-Teeth for Models from2004 to Present687027 8mm offset687029 28mm offset687031 33mm offset687033 38mm offset687035 42mm offset687037 55mm offset

Offset Pulleys with 28-Teeth for Models from2004 to Present687039 8mm offset687040 33mm offset687041 42mm offset687042 55mm offset

Apparel

Bike Kits& Trailers

Seats & Bags

Foot Controls

Hand Controls

Lighting

Electrical

Exhaust

Intake

Engine

Gaskets

Tranny& Clutch

Driveline


Frames

Forks& Shocks

Sheet-metal

General

CrossReference

12.27

Transmission Pulleys


Andrews Final DrivePulleysChange your final drive ratio withAndrews’ transmission pulleys.Precision-machined from heat-treated gear-quality steel. Fit 5-speed Big Twins from 1985 to present. . . . . . . . . . . . . . . . . .$171.99

1985-1993 1994-up

24200 24321 29-tooth pulley24510 24322 30-tooth pulley24201 24323 34-tooth pulley

Gear Ratio Chart for Final Drive PulleysTransmission PulleyStock 5-speed Big Twins come with 32-tooth pulleys. Smaller 29, 30, and 31-tooth pul-leys provide stronger acceleration, while larger 33 and 34-tooth pulleys reduceengine speed for smoother cruising. For example, a 34-tooth pulley will reduceengine speed by about 240 RPM at 60 mph.

Rear Wheel PulleySmaller pulleys will reduce the engine speed for smoother cruising. Larger pulleyswill raise the engine speed for stronger acceleration. 1993 Softail® models came with61-tooth rear wheel pulleys. 1994 Softail® models came with 70-tooth rear wheel pulleys. 1995 thru 1999 Softail® models came with 65-tooth rear wheel pulleys, andTwin Cam 88® Softail® models have 70-tooth pulleys. All other Big Twins equippedwith rear belt drive units since 1980, have 70-tooth rear pulleys.

Primary Drive RatiosA primary ratio of 1.54 (24/37 tooth combination) was stock on all Big Twin modelsfrom 1985 thru 1993. A primary ratio of 1.44 (25/36 tooth combination) is stock on allBig Twin models from 1994 to present.Transmission Rear Wheel Secondary Overall Ratio Overall Ratio

Pulley Pulley Ratio (1.54 Primary) (1.44 Primary)29 70 2.41 3.72 3.4830 70 2.33 3.60 3.3631 70 2.26 3.48 3.2532 70 2.19 3.37 3.1533 70 2.12 3.27 3.0634 70 2.06 3.17 3.0029 68 2.35 3.61 3.3830 68 2.27 3.49 3.2631 68 2.19 3.38 3.1632 68 2.13 3.27 3.0633 68 2.06 3.17 2.9734 68 2.00 3.08 2.8829 65 2.24 3.45 3.2330 65 2.17 3.34 3.1231 65 2.10 3.23 3.0232 65 2.03 3.13 2.9233 65 1.97 3.03 2.8434 65 1.91 2.94 2.7529 61 2.10 3.24 3.0230 61 2.03 3.13 2.9231 61 1.97 3.03 2.8332 61 1.91 2.94 2.7533 61 1.85 2.85 2.6634 61 1.79 2.76 2.58

RevTech®

Pulley KitIncludes 32-tooth frontpulley, mounting screws,lock plate, sprocket nut,pulley spacer and main-shaft oil seal. . . . . . . .$99.9958596 Fits 5-speed Big

Twins from 1985to present

JIMS® “Mega” Transmission Pulley Nut for 5-Speed ModelsThe “Mega” nut features a built in lock plate that stays tighteven in high-performance application. Fits all 5-speed modelsfrom 1993 to present.060650 Sold each . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$62.99

Aluminum Transmission Drive Pulleys by Belt Drives LimitedAll new lightweight 7075 super strong aluminum transmission pulleys weigh about 1/3 asmuch as stock pulleys for extended 5th gear bearing life (4-speed pulleys are constructedof 356 aluminum). And lighter weight means more horsepower to the rear wheel. Thecenter insert is gear-cut and cast in, while the pulleys are hard anodized for long life. Awide selection of sizes permits fine tuning of final drive ratio. Includes a new spacer,shaft nut, seal and retaining plate with screws. Made in the USA. . . . . . . . . . . . . . . .$131.99

Transmission Final Drive Pulley SpacerFits Big Twin models from 1985 thru 1993 (not shown).56250 Replaces OEM 33334-85 (sold each) . . . . . . . . . . . . .$11.74

For Big Twin Models from 1985 to Present42571 29-tooth42572 30-tooth42573 31-tooth42574 32-tooth42575 33-tooth42576 34-tooth

For 4-Speed Big Twin Models from 1980 thru 198442743 29-tooth42744 30-tooth42745 31-tooth42746 32-tooth42747 33-tooth

Fit Sportster® and Buell® Modelsfrom 1991 to Present42740 28-tooth42741 29-tooth42742 30-tooth

Bearing Support Plates for V-Rod® Models by Rick’sBearing support plate for the transmission drive pulley on V-Rod® models. Available with 42mm or 55mm offsets. Notrequired for wheel conversions up to 240mm, but biggerwheels like 280mm or 300mm should use one of these bearing support plates. Sold each. . . . . . . . . . . . . . .Call for price687090 33mm offset687043 38/42mm offset687044 55mm offset

65451

65454

Driv

eline

12.28

Derby & Inspection Covers

12


‘Inferno®’ Primary CoversFlamed design matches our wide variety ofInferno accessories including point cover, aircleaner insert, tranny end cover, rocker box cov-ers and many more. Unique hidden mountingsystem looks nearly invisible. Cast metal withtop-quality chrome and black painted flamebackground.27632 Derby cover for Big Twin models

from 1970 thru 1998 . . . . . . . . . . .$49.59

27612 Derby cover for Big Twin models from 1999 to present . . . . . . . . . .$49.09

27634 Inspection cover for 4-speed FL and FX models with floorboards or forward controls from 1965 thru 1986, as well as Softail® and Dyna Wide Glide® models from 1984 to present . . . . . . . . . . . . . . .$34.89

Pro-One™ ‘Millennium’ CoversChrome billet engine covers feature rounded edges. Available in smooth or ball milled styles.

Derby CoversFit all Big Twins from 1970 thru 1998. . . . . . . . . . . . . . . . . . . . . . . . . . .$68.9565348 Smooth65349 Ball milledFit all Big Twins from 1999 to present. . . . . . . . . . . . . . . . . . . . . . . . . . $68.9565451 Smooth65452 Ball milled

Inspection CoversFit 4-speed FX/FL models with forward controls from 1965 thru 1986, and Softail® or Dyna Wide Glide® models from 1984 to present. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$45.9565350 Smooth65351 Ball milled

Point CoversFit all models from 1970 to present (except Twin Cam 88®

models) not shown. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$34.9965346 Smooth65347 Ball milled (horizontal mounting holes)Fit all Twin Cam 88® models from 1999 to present. . . . . . . . . . . . . . .$34.9965453 Smooth65454 Ball milled

65351

65349

Inspection Cover Chrome Screw KitThis custom countersunk screw kit permits youto fit all Original Equipment and aftermarketinspection covers with countersunk holes tomodels with forward controls from 1989 thru1997. You use the four short screws on modelsfrom 1989 thru 1993, and two long and twoshort screws on models from 1994 thru 1997. . . . . . . . . . . . . . . . . . . .$18.4958686 Complete kit

‘Inferno®’ Derby Cover for Late Sportster® ModelsChrome-plated, die-cast construction with black-painted background.Matching easy-to-install gas caps, air cleaner cover and other parts areavailable. Includes O-ring and mounting hardware. . . . . . . . . . . . . .$42.9927952 Fits Sportster® models from 1994 to present

Apparel

Bike Kits& Trailers

Seats & Bags

Foot Controls

Hand Controls

Lighting

Electrical

Exhaust

Intake

Engine

Gaskets

Tranny& Clutch

Driveline


Frames

Forks& Shocks

Sheet-metal

General

CrossReference

12.29



05056

Ness-Tech® Flamed Engine CoversMachined from billet aluminum with a beautiful coating of chrome.05056 Derby cover for all Big Twin models from 1970 thru 1998 . . . . .$69.99

05057 Inspection cover for 4-speed FL/FX models with forward controlsfrom 1965 thru 1986,and Softail® or Dyna Wide Glide® models from 1984 to present . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$50.99

05059 Point cover for all models with horizontal mounting holes from 1970 to present (except Twin Cam 88® models) . . . . . . . . .$39.99

37862

37860 37861

Skull Engine and Primary CoversOminous 3-dimensional skulls design. Gives a tuff look that’s sure to drawattention in any crowd. Made from polished aluminum, each piece is sand-cast from a hand-carved original.

Point Covers37728 Fits Twin Cam 88® models from 1999 to present . . . . . . . . . . . .$37.19

37862 Fits all models from 1970 to present (except Twin Cam 88® models) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$37.19

Derby Covers37726 Fits all Big Twin models from 1999 to present . . . . . . . . . . . . . .$89.49

37860 Fits all Big Twin models from 1970 thru 1998 . . . . . . . . . . . . . . .$84.59

37727 Fit all Sportster® models from 1994 thru 2003 . . . . . . . . . . . . . .$89.49

Inspection Cover37861 Fits 4-speed FL and FX models with floorboards or forward

controls from 1965 thru 1986, as well as Softail® and Dyna Wide Glide® models from 1984 to present . . . . . . . . . . . .$49.79

Skull Rocker Box Cover Sets37725 Fits all Evolution® Big Twin models from 1984 thru 1999 . . .$134.69

Skull Covers by Skull EnterprisesPolished cast aluminum from hand carved mold. Available with a big skull surrounded by smaller skulls, or with all small skulls. Fit Big Twin models from 1970 thru 1998 (except Twin Cam 88® models).37733 Derby cover with big and small skulls . . . . . . . . . . . . . . . . . . . . . . . . . . .$84.59

37730 Derby cover with small skulls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$84.59

37729 Point cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$27.99

12008 Derby cover gasket (replaces OEM 25416-70) pack of 10 . . . . . . . . .$24.99

37730

37733

37729

Multiple Skull Inspection Cover by Skull EnterprisesPolished cast aluminum from hand-carved mold. Fits 4-speed FL and FX modelswith floorboards or forward controls from 1965 thru 1986, as well as Softail® andDyna Wide Glide® models from 1984 to present. . . . . . . . . . . . . . . . . . . . . . .$47.9933154 Sold each

37725

05057

Driv

eline

12.30

12



Collection Covers by Pan-Galactic SculptureSay something about yourself with these specialty inspection covers by Pan Galactic. Made from precision molded cast aluminum, they have crisp, clean linesand intricate detail. The rugged black powder coat has a smooth, gloss finish in sharp contrast to the highly polished aluminum. Available either as a com-plete set, or individual pieces.

POW/MIA CollectionEnough said. 10% of the proceeds from the sale of these covers are donated to Vietnam Veterans groups.340818 POW/MIA Collection. Set of all three (points, 3-hole derby, inspection) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$177.99

340817 POW/MIA points cover. Fits Big Twins models from 1970 thru 1999 except Twin Cam 88® models (with two-hole cover) . . . . . . . . . . . . . . . . . . .$51.99

340816 POW/MIA derby cover. Fits Big Twins models from 1970 thru 1999 (with three-hole cover) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$91.99

340823 POW/MIA 5-hole derby cover. Fits Big Twins models from 1999 to present (with five-hole cover) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$104.99

340815 POW/MIA inspection cover. Fits Softail® and Dyna Wide Glide® models from 1984 thru 1999 and 4-speed Big Twins from 1965 thru 1984 with forward controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$54.99

Grateful Dead Collection Black powered coated “Steal Your Face”:The Great American Bike meets the Great American Band. A semi-religious American icon. Officially licensed product.340822 Grateful Dead Collection. Set of all three (points, 3-hole derby, inspection) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$159.99

340819 Grateful Dead points cover. Fits Big Twins models from 1970 thru 1999 except Twin Cam 88® (with two-hole cover) . . . . . . . . . . . . . . . . . . . . . .$45.99

340820 Grateful Dead 3-hole derby cover. Fits Big Twins models from 1970 thru 1999 (with three-hole cover) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$84.99

340824 Grateful Dead 5-hole derby cover. Fits Big Twins from models from 1999 to present (with five-hole cover) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$92.99

340821 Grateful Dead inspection cover. Fits Softail® and Dyna Wide Glide® models from 1984 thru 1999 and 4-speed Big Twins models from 1965 thru 1984 with forward controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$48.99

340818Collection

340822Collection

‘Live To Ride’ Derby and Inspection CoversClassic design with either ‘A Way of Life’ banner or ‘Eagle Spirit’ banner.

Derby CoversFits all Big Twin models from 1970 thru 1998.19005 ‘A Way of Life’ in Chrome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$22.99

18920 ‘Eagle Spirit’ in Gold . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$51.49

18920 19005

‘Teardrop and Allen’Primary CoversExclusive Custom Chrome® design matches the complete line of‘Teardrop and Allen’ accessories. Perfectly chrome-plated, they fea-ture stainless steel buttonhead rivets and teardrop indentations.Includes hardware.37262 Inspection cover for 4-speed FL and FX models with

forward controls from 1965 thru 1986, and Softail® or Dyna Wide Glide® models from 1984 to present . . . . . .$32.99

37268 Inspection cover for FXR models from 1985 thru 1999 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$29.99

37262

37268


Apparel

Bike Kits& Trailers

Seats & Bags

Foot Controls

Hand Controls

Lighting

Electrical

Exhaust

Intake

Engine

Gaskets

Tranny& Clutch

Driveline


Frames

Forks& Shocks

Sheet-metal

General

CrossReference

12.31


RevTech® Chrome Billet Derby CoversMatch these 2-piece, chrome-plated billet aluminum derby covers with our RevTech®

wheels, pulleys, rotors, point covers and more for complete style. Includes all mountinghardware. Available for all Big Twin models from 1970 to present. . . . . . . . . . . . . . .$109.99

Fit all Big Twin Models with 3-BoltCovers from 1970 thru 199833454 Spike33455 Grinder33456 Wings33457 T-333459 Pulsar33460 Airfoil 333462 Inferno33463 Meridian

Fit all Big Twin Models with 5-BoltCovers from 1999 to Present33464 Scorpion33465 Stiletto33467 Spike33468 Grinder33469 Wings33470 T-333471 3-Spoke Swept33472 Pulsar33473 Airfoil 333475 Inferno33476 Meridian

Airfoil 3

Spike

600104 Creep600105 Style 53600107 West Side600108 Doom600109 Penta

600103 The Wheel

600111 Creep600112 Style 53600114 West Side600115 Doom600116 Penta

600110 The Wheel

Wings

GrinderStilettoScorpion Pulsar

3-Spoke Swept

T-3

MeridianInferno

Jesse James ‘Signature Series’ Derby Covers . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$98.19Please see page 8.35 for photographs of additional styles listed below

Paul Yaffe ‘Signature Series’ Derby Covers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$98.19Please see page 8.35 for photographs of additional styles listed below

F. Kodlin Chrome Engine CoversCNC-machined from aluminum and then chrome-plated forthe ultimate in appearance. Fit most Big Twin models from1970 to Present.

Derby Covers for Big Twin Models with 3-HoleCovers from 1970 thru 199885837 ‘K-Oval’ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$191.49

85838 ‘Drop’ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$191.49

85839 ‘Grooved’ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$190.39

85840 ‘Halebob’ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$224.49

Derby Covers for Big Twin Models with 5-HoleCovers from 1999 to Present86552 ‘Drop’ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$191.49

86554 ‘Grooved’ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$191.49

Inspection Covers for 1996-Up Softail®

and Dyna Wide Glide® Models85841 ‘K-Oval’ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$118.89

85842 ‘Drop’ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$117.79

85843 ‘Grooved’ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$118.89

Point Covers for all Twin Cam 88® Models from 1999 to Present86553 ‘Drop’ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$90.19

86555 ‘Grooved’ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$90.19

Point Covers for all Models from 1970 to Present (except Twin Cam 88® Models)85844 ‘K-Oval’ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$90.19

85845 ‘Drop’ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$90.19

85846 ‘Grooved’ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$90.09

‘K-Oval’

‘Drop’

‘Grooved’

Driv

eline

12.32

12



‘Mirage®’ Engine CoversClean design and unique “hidden mounting bolts” mean virtually invisiblehardware when installed. Chrome-plated with decorative black paintedslots match the complete Mirage® line of accessories. Easy-to-install.Complete with all hardware.27146 Derby cover for all Big Twin models from 1970 thru 1998 . . . .$42.49

27613 Derby cover for all Big Twin models from 1999 to present . . . .$46.29

27155 Inspection cover for 4-speed FL and FX models with forward controls from 1965 thru 1986 and Softail® or Dyna Wide Glide®

models from 1984 to present . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$31.39

27147 Point cover for all Sportster® and Big Twin models from 1970 thru 2003 (except Twin Cam 88® models) . . . . . . . . . . . . . . . . . . . .$32.89

Donnie Smith Signature Series™ Dress-up KitPreviously only available as separate components, the Donnie Smith line of custom covers is now available as a complete dress-up kit. This matchingset of accessories includes the points, derby, inspection, and transmissioncovers. Includes chrome mounting hardware. 340830 Dress-Up Kit for Softail® models from 1987 thru 1998 . . . . . . . .$174.99

340800 Derby cover for all Big Twins from 1970 thru 1999 . . . . . . . . . . . .$48.49

340801 Inspection cover for Softail® and Dyna Glide models from 1984 thru 1999 and 4-speed Big Twin models from 1970 thru 1986 with forward controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$48.49

340802 Point cover for all Big Twins from 1970 to present (except Twin Cam 88® models) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$25.99

340804 Transmission cover installs over stock cover and includes hardware.Fits 5-speed big twins 1987 thru 2003 . . . . . . . . . . . . . . . . . . . . . . . .$44.99

37250

37255

‘Riveted’ Engine CoversGet that high-tech ‘racers only’ look with our buttonhead ‘Riveted’ chromecovers. Includes mounting hardware.37250 Derby cover for all Big Twin models from 1970 thru 1998 . . . . .$34.99

37251 Point cover for all models from 1970 to present (except Twin Cam 88® models) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$21.49

37255 Inspection cover for FXR models from 1985 thru 1994 . . . . . . . .$21.99

Chrome Inspection CoverFits 4-speed Big Twins with for-ward controls from 1965-early 1984. . . . . . . . . . . . . . . . . . . . . . . .$9.9915936 Replaces OEM 60572-78T

Ball Milled Billet Engine Covers by Pro-One™

CNC-machined and chrome-plated. For all BigTwin models from 1970 thru 1998.65076 Derby cover . . . . . . . . . . . . . . . . . . . .$68.95

65075 Point cover (horizontal holes) . . . .$34.99

Chrome Covers for ‘Tin’ StyleOuter Primary CoversEnhance the look of your ‘tin’ style primarywith these heavy-gauge covers.12266 Inspection cover . . . . . . . . . . . . . .$7.99

12267 Derby cover . . . . . . . . . . . . . . . . .$13.99

12267

12266

‘Flat’ and ‘Domed’ Derby CoversChromed heavy-gauge flat-steel or die-cast domed derby covers. Fit all Big Twin models from 1970 thru 1998.15148 Flat (repl. OEM 52573-77T) . . . . . . . . . . . . . . . . . . . . . .$17.99

25230 Domed (repl. OEMs 60668-84A, 25392-84T) . . . . . .$28.99

‘Regency™’ Engine CoversChrome design matches wide variety of ‘Regency’ accessories. Features unique hiddenmounting system.

Derby Covers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$47.9922041 Fits all Big Twin models with 3-hole covers from 1970 thru 199822044 Fits all Big Twin models with 5-hole covers from 1999 to present

Point Covers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$29.9922039 Fits all Twin Cam 88® models from 1999 to present (shown)

Chrome Cover for Primary InspectionCoverInstalls over the stock inspection cover using only the two end screws. You don’t break the original seal – you don’t create a leak! . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$19.9976008 Fits 4-speed FL and FX models with forward controls

from 1965 thru 1986, and Softail® or Dyna Wide Glide®

models from 1984 to present

Chrome ‘Porthole’ CoversBrilliantly-designed covers simulating port holes setoff an eye-catching custom look.• Designed for inspection, point and derby covers• Made of CNC billet aluminum and

polished chrome• Easy installation in minutes• Sold each98366 Inspection cover for 4-speed FL and FX

models from 1965 thru 1986 with forward controls and all Softail®

and Dyna Wide Glide® models from 1984 to present . . . . . . . . . . . . . . .$33.89

98368 Derby cover for all Big Twin models from 1970 thru 1998 . . . . . . . . . . . . . . . .$58.59

698370 Derby cover for all Big Twin models from 1999 to present . . . . . . . . . . . . . . .$81.69

Apparel

Bike Kits& Trailers

Seats & Bags

Foot Controls

Hand Controls

Lighting

Electrical

Exhaust

Intake

Engine

Gaskets

Tranny& Clutch

Driveline


Frames

Forks& Shocks

Sheet-metal

General

CrossReference

12.33



Chrome Derby Cover for Late Sportster® ModelsDress up your 1994 thru 2003 with thischrome 4-screw derby cover. . . . .$24.4925232 Replaces OEM 34761-94

‘Vandetta’

Driv

eline

12.34

RevTech® Rear Belt Pulleys

12


RevTech® Billet Rear Belt PulleysWe machined the design into both sides of the pulley so they look great from any angle. Made in the USA to exacting standards, each piece is CNC-machinedfrom solid blocks of 6061 ‘T-6’ billet aluminum for maximum durability. Match them up with a set of great-looking RevTech® wheels to create a complete customlook. Includes chrome-plated mounting hardware. Tooth count may be matched to stock sizes or custom configured with front pulleys to emphasize cruisingcomfort or hard-charging acceleration. Available for most models from 1980 to present (except Touring models from 2000 to present).Chrome pulleys from $401.99 to $529.99

‘Inferno’ ‘Meridian’

Chrome RevTech® Pulley ChartFor 1991 thru 1999 For 2000-up For 1980 thru 1999 For 2000-up Big TwinsSportster® Models Sportster® Models Big Twin Models (except Touring models) Style Designer

61-Tooth 61-Tooth 65-Tooth 70-Tooth 70-Tooth

601245 601246 601247 601248 601249 Vendetta RevTech48130 48131 47232 47231 48134 Inferno RevTech48132 48133 47298 47299 47458 Meridian RevTech48135 48136 47144 47142 47452 Scorpion RevTech48137 48138 48139 48140 47462 RevPro™ RevTech

Chrome RevTech® ‘Designer Series’ Pulley ChartFor 1991 thru 1999 For 2000-up For 1980 thru 1999 For 2000-up Big TwinsSportster® Models Sportster® Models Big Twin Models (except Touring models) Style Designer

61-Tooth 61-Tooth 65-Tooth 70-Tooth 70-Tooth

48161 48162 48163 48164 48165 Creep Jesse James / WCC48181 48182 48183 48184 48185 Doom Jesse James / WCC48176 48177 48178 48179 48180 West Side Jesse James / WCC601210 601217 601224 601231 601238 Jagged Edge Paul Yaffe Originals601211 601218 601225 601232 601239 Roll Out Paul Yaffe Originals601212 601219 601226 601233 601240 Jaw Dropper Paul Yaffe Originals601213 601220 601227 601234 601241 Slicer & Dicer Eddie Trotta601214 601221 601228 601235 601242 Slime Ball Eddie Trotta601215 601222 601229 601236 601243 Spike II Big Bear Choppers601216 601223 601230 601237 601244 PAB Big Bear Choppers

‘Scorpion’ ‘RevPro’

West Side Jagged Edge Roll Out Jaw DropperDoomCreep

Slicer & Dicer Slime Ball Spike II PAB


Apparel

Bike Kits& Trailers

Seats & Bags

Foot Controls

Hand Controls

Lighting

Electrical

Exhaust

Intake

Engine

Gaskets

Tranny& Clutch

Driveline


Frames

Forks& Shocks

Sheet-metal

General

CrossReference

12.35

Rear Belt Pulleys

RST PulleysRST High Tech billet aluminum rear belt pul-leys, CNC machined from solid billet block ofaluminum. Available highly polished or pol-ished with black centers. The perfect match toRST disc brake rotors and High Tech wheels.Made in Germany to exacting standards.Tooth count may be matched to stock sizes orcustom configured with front pulleys toemphasize cruising comfort or hard-chargingacceleration. Available for most Big Twin mod-els from 1980 to present (except FLT, FLHT andRoad King® models from 2000 to present).

RevTech® ‘Mag Wheel’ Rear PulleysPut your bike on the fast-track with RevTech® rear pulleys. They’re CNCmachined to match the spokes on Original Equipment 9-spoke or 13-spokecast rear wheels. Made in the USA to exacting standards, each piece is CNC-machined from solid blocks of 6061 ‘T-6’ billet aluminum for maximumdurability. And for detail freaks, they have the design machined on bothsides rather than leaving the back plain. Fit most Big Twins from 1980 thru1999, and include chrome-plated hardware. . . . . . . . . . . . . . . . . . . . . . . .$577.99

Chrome 70-Tooth Pulleys47159 13-spoke design47166 9-spoke design

5-Spoke High-Tech New Style

For 1980 thru 1999 For 1980 thru 1999 For 2000-Up Big Twin Models Big Twin Models Big Twin Models

1.5"-Wide 1.125"-Wide 1.125"-Wide (custom applications) (except ‘Touring’ models)

Part # Part # Part # Style

686170 686171 686174 High Tech 61-tooth686498 686499 686502 Black High Tech 61-tooth686172 686173 686175 High Tech 65-tooth686500 686501 686503 Black High Tech 65-tooth

686176 High Tech 70-tooth686504 Black High Tech 70-tooth

686177 686178 686181 New Style 61-tooth686505 686506 686509 Black New Style 61-tooth686179 686180 686182 New Style 65-tooth686507 686508 686510 Black New Style 65-tooth

686183 New Style 70-tooth686511 Black New Style 70-tooth

686184 686185 686188 5-Spoke 61-tooth686512 686513 686516 Black 5-Spoke 61-tooth686186 686187 686189 5-Spoke 65-tooth686514 686515 686517 Black 5-Spoke 65-tooth

686190 5-Spoke 70-tooth686518 Black 5-Spoke 70-tooth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Call for price

Black 5-Spoke

Original Equipment Rear Belt Pulleys These are Original Equipment items. Available with black or silver finishesfor Big Twins from 1980 thru 1999.75515 Black 70-tooth pulley (repl. OEM 40217-79A) . . . . . . . . . . . . . . . .$256.99

75516 Silver 70-tooth pulley (repl. OEM 40211-85A) . . . . . . . . . . . . . . . .$299.99

75517 Black 65-tooth pulley (repl. OEM 40312-94) . . . . . . . . . . . . . . . . . .$256.99

75518 Silver 65-tooth pulley (repl. OEM 40311-94) . . . . . . . . . . . . . . . . . .$299.99

Driv

eline

12.36

BDL Rear Belt Pulleys

12


Rear Belt Pulleys by Belt Drives LimitedPolished or chrome billet aluminum pulleys withhard-chromed and machined inner flanges. Usestock mounting hardware, and fit most BigTwins from 1980 to present.Note: The 3-Spoke pulleys are not recommended for use on high-performance Big Twins.

Chrome Pulleys for all Big Twin Models from 1980 thru 1999For use with 11/2"-wide rear drive belts.65-tooth 70-tooth

47168 47170 Swept . . . . . . . . . . .$389.99

47171 47173 3-Spoke . . . . . . . . . .$389.99

47174 47176 5-Spoke . . . . . . . . . .$389.99

n/a 47178 9-Spoke . . . . . . . . . .$389.99

47179 47181 Solid . . . . . . . . . . . . .$389.99

080892 080792 5-Hole . . . . . . . . . . .$389.99

47187 47190 Mesh . . . . . . . . . . . .$389.99

Polished Pulleys for all Big Twin Models from 1980 thru 1999For use with 11/2"-wide rear drive belts.65-tooth 70-tooth

47195 47197 Solid . . . . . . . . . . . . .$296.99

5-Spoke

3-SpokeSweptSolid

9-Spoke

5-Hole Mesh

California Dagger

California Swept

Sunburst 5-Spoke The Maze

‘Domed’ Rear Belt Pulleys by Belt Drives LimitedThe ‘Domed’ design of these rear belt pulleysmakes them different from the rest! Unique center cover hides all visible mounting hardware,giving a cleaner and smooth appearance. They’re made of billet aluminum and have chrome finishes with hard-chromed, machinedinner flanges. They use the stock mounting hardware, and fit most Big Twin models from1980 to present.

Chrome Belt Pulleys for Big Twin Modelsfrom 2000 to Present (except FLT, FLHT and Road King® Models)Designed for 11/8"-wide belts. . . . . . . . . . . . . .$464.9965-tooth 70-tooth

44665 44667 California Swept44673 44675 California Dagger44681 44683 The Maze44689 44691 Sunburst

Chrome Belt Pulleys for all Big Twin Modelsfrom 1980 thru 1999Designed for 11/2"-wide belts. . . . . . . . . . . . . .$464.99

65-tooth 70-tooth

44661 44663 California Swept44669 44671 California Dagger44677 44679 The Maze44685 44687 Sunburst44693 44695 3-Spoke44697 44699 5-Spoke44701 44703 Mesh44705 44707 Plain44709 44711 SweptNote: 3-Spoke pulleys are not recommended for use on high-performance Big Twins.

Apparel

Bike Kits& Trailers

Seats & Bags

Foot Controls

Hand Controls

Lighting

Electrical

Exhaust

Intake

Engine

Gaskets

Tranny& Clutch

Driveline


Frames

Forks& Shocks

Sheet-metal

General

CrossReference

12.37

Rear Belt Pulleys


Revolver

“Pro-Stock” Custom Rear PulleysManufactured from aircraft grade aluminum, and precision machined on the latest CNC equipment to provide maximum belt to pulley fitment. Available in 65- and 70-tooth versions.

Excalibur Thrasher

Fit all Big Twin Models from 1980 thru 1999

Spoked Rear Belt Pulleys by Evolution IndustriesRear pulleys feature plain stainless steel spokesto match perfectly with your rear spoked wheel.The hub and rim are chromed billet aluminum.

Fit all Big Twin Models from 1980 thru 199918764 65-Tooth . . . . . . . . . . . . . . . . . . . . .$728.00

18765 70-Tooth . . . . . . . . . . . . . . . . . . . . .$728.00

Fit all Big Twin Models from 2000 to Present (except Touring Models)Includes spacer for use with 1984-1999 style hubs.18766 65-Tooth . . . . . . . . . . . . . . . . . . . . .$728.00

18767 70-Tooth . . . . . . . . . . . . . . . . . . . . .$728.00

Fit Softail® Models from Late 1987 thru 199908453 Kit for 11/2"-wide belts . . . . . .$1,590.00

08454 Kit for 11/8"-wide belts (includes adaptor ring) . . . . . . .$1,649.00

Fit Dyna Glide Models from 1991 thru 199908457 Kit for 11/2"-wide belts . . . . . .$1,590.00


Fit FXR Models from Late 1987 thru 199908459 Kit for 11/2"-wide belts . . . . . .$1,590.00


Fit Custom Belt Drive Rigid Models with 3/4"-Diameter Rear Axles08455 Kit for 11/2"-wide belts . . . . . .$1,590.00


Replacement Parts08461 Adaptor ring . . . . . . . . . . . . . . . . .$101.99

08461

‘Inside/Out’ Brake PulleyKits by GMADramatically clean up the rear wheelof your bike. Innovative design mountsthe 4-piston chrome caliper and rotorinternally. Features a polished CNC billet 70-tooth pulley, ducted fanspokes to cool the brake, and floatingductile iron rotor. Kits are available forthe Original Equipment 11/2"-wide beltsor with a Pulley Adaptor Ring that converts11/2"-wide belt pulleys to 11/8"-wide. Idealfor wide tire applications where you needmore clearance between the tire and the belt.Each kit includes stainless steel brake lines andall necessary hardware. This direct bolt on kitrequires absolutely no welding or machining(rigid frame applications require a weld on tabwhich is included).

080850 Revolver (70-tooth) . . . . . . . . . . . . .$369.99

080950 Revolver (65-tooth) . . . . . . . . . . . . .$369.99

080851 Excalibur (70-tooth) . . . . . . . . . . . . .$369.99

080951 Excalibur (65-tooth) . . . . . . . . . . . . .$369.99

080852 Thrasher (70-tooth) . . . . . . . . . . . . .$439.99

080952 Thrasher (65-tooth) . . . . . . . . . . . . .$439.99

Driv

eline

12.38

Rear Sprocket & Pulley Accessories

12


25290

25428

Chrome Rear Pulley CoversPremium-quality stamped steel covers fit moststock pulleys used on most Big Twins from 1980thru 1999, and Sportster® models from 1991 thru2003. Includes chrome-plated Torx® hardwareand 3/8"-drive bit unless specified otherwise.

8-Hole Covers for 70-Tooth Pulleys25290 Outer cover with hardware . . . . . .$42.49

25426 Outer cover ONLY repl. OEM 91733-85 . . . . . . . . . . . . . .$25.99

25324 Inner cover with hardware . . . . . . .$45.99

8-Hole Covers for 65-Tooth Pulleys25325 Outer cover with hardware . . . . . .$40.99

8-Hole Covers for 61-Tooth Pulleys25420 Outer cover ONLY for 5-speed

Sportster® models from 1991 thru 2003 (repl. OEM 40279-91) . .$33.49

25421 Outer cover ONLY for Big Twin models from 1980 thru 1999 (repl. OEM 40284-90) . . . . . . . . . . . .$31.99

Solid Covers for 70-Tooth Pulleys25428 Outer cover with hardware . . . . . .$37.99

080254 Inner cover ONLY . . . . . . . . . . . . . . . .$36.99

Assorted Hardware25427 Kit with bolts, washers and tool . .$16.99

25423 Hardware only. Includes bolts and washers ONLY . . . . . . . . . . . . . . .$13.99

Chrome Steel Pulley Covers for Twin Cam 88® Softail® ModelsFit Softail® models with 70-tooth rear pulleysfrom 2000 to present. One version matches theOriginal Equipment rear wheels fitted to allDeuce™ models and may be installed on anySoftail® model if desired. Sold each. . . . . . .$37.9925425 Fits Softail® models (except Deuce™

models) replaces OEM 91347-0025432 Fits all Softail® models

(replaces OEM 91348-00)

25425

25432

Wire-Laced Pulley CoverMatch the look of your traditional laced wheelwith this 20-spoke pulley cover for 70-tooth rearbelt pulleys. . . . . . . . . . . . . . . . . . . . . . . . . . . . .$114.9922605 Fits Big Twins from 1980 thru 1999

Rear Pulley Bolt CoversFits OEM hexhead pulley mounting bolts. Set of 5 dome-style chrome plastic covers. . . . . . . .$26.6966015 Fit all models from 1980 to present

Rear Wheel Sprocket and PulleySpacersBillet aluminum spacers permit custom align-ment of rear wheel pulleys or sprockets. Can beused with many wide rear tire kits and frames.Do not fit 2000-up wheel assemblies.

Chrome-Plated18748 1"-thick . . . . . . . . . . . . . . . . . . . . . . . .$76.99

Natural Aluminum Finish42691 .250"-thick . . . . . . . . . . . . . . . . . . . . . .$29.99

42692 .375"-thick . . . . . . . . . . . . . . . . . . . . . .$37.99

42693 .500"-thick . . . . . . . . . . . . . . . . . . . . . .$44.99

42694 .750"-thick . . . . . . . . . . . . . . . . . . . . . .$59.99

42695 .937"-thick . . . . . . . . . . . . . . . . . . . . . .$59.99

42696 1.100"-thick . . . . . . . . . . . . . . . . . . . . .$74.99

42697 1.250"-thick . . . . . . . . . . . . . . . . . . . . .$74.99

Steel Rear Wheel Pulley and Sprocket SpacerUsed on Big Twin models from 1980 thru 1985to properly space the rear belt pulley to thewheel. Also used to space the rear sprocket on chain applications. Measures .200" thick. Sold each. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$12.4919722 Replaces OEM 40932-81

Rear Wheel Sprocket and PulleySpacersChrome-plated spacers permit custom alignmentof rear wheel pulley or sprockets. Can be usedwith many wide rear tire kits and frames. Do notfit 2000-up wheel assemblies.95153 13/8"-thick . . . . . . . . . . . . . . . . . . . . . . .$77.99

95154 11/8"-thick . . . . . . . . . . . . . . . . . . . . . . .$69.99

95158 7/8"-thick . . . . . . . . . . . . . . . . . . . . . . .$61.99

95159 11/16"-thick . . . . . . . . . . . . . . . . . . . . .$59.99

Apparel

Bike Kits& Trailers

Seats & Bags

Foot Controls

Hand Controls

Lighting

Electrical

Exhaust

Intake

Engine

Gaskets

Tranny& Clutch

Driveline


Frames

Forks& Shocks

Sheet-metal

General

CrossReference

12.39

Rear Drive Belts


14mm

Drive Belt Application ChartDomestic and international V-Rod® models with 72-tooth rear pulleys 13/8"-wide, 150-teeth from 2002 thru 2003 (repl. OEM 40027-01)

Domestic 5-speed Sportster® and Buell® models (except Firebolt™ 11/8"-wide, 128-teeth and Blast™ models) with 61-tooth rear pulleys from 1991 thru 2003, (repl. OEM 40022-91) and the H-D® Accessory belt drive kit for 4-speed Sportster® models

International Sportster® models with 55-tooth rear pulleys 11/8"-wide, 125-teeth from 1991 thru 2003 (repl. OEM 40038-91)

International Buell® models (except Firebolt™ models) 11/8"-wide, 128-teeth with 55-tooth rear pulleys from 1994 thru 2002 (repl. OEM 40022-91)

Domestic and international 4-speed Big Twin models 11/2"-wide, 126-teeth with 70-tooth rear pulleys from 1980 thru 1986 (repl. OEM 40003-79)

Domestic Softail® models with 70-tooth rear pulleys from 1986 thru 1992 11/2"-wide, 132-teeth and 1994. Also fits international Softail® models from 1986 thru 1988 (repl. OEM 40023-86)

International Softail® models with 61-tooth rear pulleys 11/2"-wide, 127-teeth from 1989 thru 1993 (repl. OEM 40010-89)

Domestic Softail® models with 61-tooth rear pulleys 1993 ONLY 11/2"-wide, 128-teeth and international Softail® models with 65-tooth pulleys 1994 ONLY (repl. OEM 40012-90)

Domestic and international Softail® models with 65-tooth rear pulleys 11/2"-wide, 130-teeth from 1995 thru 1999 (repl. OEM 40017-94)

Domestic and international Softail® models with 70-tooth rear pulleys 11/8"-wide, 135-teeth from 2000 to present (repl. OEM 40307-00)

Domestic FXR models with 70-tooth rear pulleys from 1985 thru 2000 11/2"-wide, 136-teeth and international FXR models from 1985 thru 1988 and 1994 ONLY (repl. OEM 40001-85)

International FXR models with 61-tooth rear pulleys 11/2"-wide, 132-teeth from 1989 thru 1993 (repl. OEM 40023-86)

Domestic Dyna Glide models with 70-tooth rear pulleys from 1991 11/2"-wide, 133-teeth thru 1999 and international Dyna Glide models from 1994 thru 1999 (repl. OEM 40015-90)

International Dyna Glide models with 61-tooth rear pulleys 11/2"-wide, 128-teeth from 1991 thru 1993 (repl. OEM 40012-90)

Domestic and international Dyna Glide models with 70-tooth 11/8"-wide, 133-teeth rear pulleys from 2000 to present (repl. OEM 40015-00)

Domestic and international FLT, FLHT, FLHS and Road King® models 11/2"-wide, 136-teeth with 70-tooth rear pulleys from 1985 thru 1996 (except international (repl. OEM 40001-85)models from 1989 thru 1993)

International FLT, FLHT and FLHS models with 61-tooth rear pulleys 11/2"-wide, 132-teeth from 1989 thru 1993 (repl. OEM 40023-86)

Domestic and international FLT, FLHT and Road King® models 11/2"-wide, 139-teeth with 70-tooth rear pulleys from 1997 to present (repl. OEM 40024-97)

14mm

Replacement Rear Drive BeltsA wide selection of 14mm replacement final drive belts fromGates and Dayco to fit most Original Equipment and aftermarketbelt drive units sold today. The application chart below may beused to determine the stock replacement belt for your particularapplication. The chart lists the model applications and years offitment along with the belt width and tooth count. If you haveinstalled oversized or undersized pulleys, it's a safe bet that wehave something that will fit your particular application.

14mm Gates HTD® ‘Poly Chain®’ BeltsAll HTD® Poly Chain® belts have the distinctive exterior ribbingand are manufactured in the USA by the Gates Rubber Company.Poly Chain® belts are Kevlar® reinforced and feature rugged con-struction with aramid fibers surrounded by polyurethane.

14mm Dayco™ ‘Panther™’ Rubber BeltsRides smoother and quieter than conventional belts because theparabolic tooth profile eliminates trapped air between the beltand pulley. Patented graphite, self-lubricating, double nylon cover with special stiflex fiber allows thisbelt to hold up to maximum torque and extreme temperatures.

HTD® and Poly Chain® are registered trade-marks of the Gates Rubber Company. Note: The belts offered for sale on thispage have no warranty whatsoever.

14mm Gates HTD® Poly Chain® Drive Belts42749 1"-wide, 126-teeth . . . . . . . . . . . . .$131.99

42730 1"-wide, 130-teeth . . . . . . . . . . . . .$131.99

42731 1"-wide, 132-teeth . . . . . . . . . . . . .$131.99

42732 1"-wide, 133-teeth . . . . . . . . . . . . .$131.99

44602 1"-wide, 135-teeth . . . . . . . . . . . . .$131.99

42748 1"-wide, 136-teeth . . . . . . . . . . . . .$131.99

43023 11/8"-wide, 125-teeth . . . . . . . . . . .$183.99

42778 11/8"-wide, 126-teeth . . . . . . . . . . .$183.99

43117 11/8"-wide, 128-teeth . . . . . . . . . . .$183.99

42780 11/8"-wide, 130-teeth . . . . . . . . . . .$183.99

42781 11/8"-wide, 132-teeth . . . . . . . . . . .$183.99

42782 11/8"-wide, 133-teeth . . . . . . . . . . .$183.99

42783 11/8"-wide, 135-teeth . . . . . . . . . . .$183.99

42784 11/8"-wide, 136-teeth . . . . . . . . . . .$183.99

42614 11/2"-wide, 125-teeth . . . . . . . . . . .$191.29

43043 11/2"-wide, 126-teeth . . . . . . . . . . .$191.29

42615 11/2"-wide, 127-teeth . . . . . . . . . . .$191.29

43021 11/2"-wide, 128-teeth . . . . . . . . . . .$191.29

42616 11/2"-wide, 130-teeth . . . . . . . . . . .$191.29

43045 11/2"-wide, 132-teeth . . . . . . . . . . .$191.29

43020 11/2"-wide, 133-teeth . . . . . . . . . . .$191.29

43049 11/2"-wide, 135-teeth . . . . . . . . . . .$191.29

43044 11/2"-wide, 136-teeth . . . . . . . . . . .$191.29

42879 11/2"-wide, 139-teeth . . . . . . . . . . .$199.99

14mm Dayco™ ‘Panther™ Ultra Cord’ Drive Belts42892 1"-wide, 126-teeth . . . . . . . . . . . . .$131.99

42894 1"-wide, 130-teeth . . . . . . . . . . . . .$131.99

42895 1"-wide, 132-teeth . . . . . . . . . . . . .$131.99

42896 1"-wide, 133-teeth . . . . . . . . . . . . .$131.99

42897 1"-wide, 136-teeth . . . . . . . . . . . . .$131.9942751 11/8"-wide, 125-teeth . . . . . . . . . . .$165.99

42772 11/8"-wide, 126-teeth . . . . . . . . . . .$165.99

42753 11/8"-wide, 128-teeth . . . . . . . . . . .$165.99

42774 11/8"-wide, 130-teeth . . . . . . . . . . .$165.99

42775 11/8"-wide, 132-teeth . . . . . . . . . . .$165.99

44603 11/8"-wide, 133-teeth . . . . . . . . . . .$165.99

42776 11/8"-wide, 136-teeth . . . . . . . . . . .$165.99

42750 11/2"-wide, 125 tooth . . . . . . . . . . .$165.99

42126 11/2"-wide, 126-teeth . . . . . . . . . . .$165.99

42127 11/2"-wide, 127-teeth . . . . . . . . . . .$165.99

42752 11/2"-wide, 128-teeth . . . . . . . . . . .$165.99

42754 11/2"-wide, 130-teeth . . . . . . . . . . .$165.99

42132 11/2"-wide, 132-teeth . . . . . . . . . . .$165.99

42133 11/2"-wide, 133-teeth . . . . . . . . . . .$165.99

42135 11/2"-wide, 135-teeth . . . . . . . . . . .$165.99

42136 11/2"-wide, 136-teeth . . . . . . . . . . .$165.99

Driv

eline

12.40

Rear Sprockets

12


‘Scorpion’ and ‘Stiletto’ Directional SprocketsSensational styling is matched with precision engineering for a perfect complement to our hot-selling RevTech® wheelsand matching accessories like derby and point covers and turnsignal lens kits. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$80.99

Stiletto Scorpion

09791 09804 51 tooth for 4-speed Big Twin modelsfrom 1973 thru 1985 and Sportster®

models from 1979 thru 1981 (repl. OEM 41470-78T)

09792 09805 48 tooth for all FXR models with chaindrive (except FXRT, FXRP) from 1982 thru 1985 (repl. OEM 40954-81)

09793 09806 48 tooth for all Sportster® models from1986 thru 1992 (repl. OEM 41470-86T)

‘Stiletto’

‘Scorpion’

Custom Chrome® Rear SprocketsThe Custom Chrome® sprocket line continues a long traditionof innovative style, quality and design that makes CC a leaderin custom parts and accessories for Harley-Davidson®. Thesehardened steel sprockets have triple chrome plating and fea-ture a directional cut-out design. Fits Big Twin models from1973 thru 1985 (except FXR) and Sportster® models from 1979thru 1981.080282 47 tooth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$70.99

080281 48 tooth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$71.99

080280 49 tooth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$71.99

09801 51 tooth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$73.49

Fits FXR models (except FXRT, FXRP) with rear chain drive1982 thru 198509802 48 tooth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$73.49

Fits Sportster® models from 1986 thru 199209803 48 tooth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$73.49

FXR FX/XL

Rear Sprockets for Disc Brake ModelsTop-quality rear sprockets in a variety of sizes. Available plain or chrome-plated

Fit 4-Speed Big Twins 1973 thru 1985, and Sportster® Models 1979 thru 1981Plain

25644 48 tooth . . . . . . . . . . . . . . . . . .$37.99

25639 49 tooth . . . . . . . . . . . . . . . . . .$37.99

15912 51 tooth (repl. OEMs 41470-73 and 41470-78T) . . . . . . . . . . .$37.99

Chrome

84372 47 tooth . . . . . . . . . . . . . . . . . .$43.99

25692 48 tooth . . . . . . . . . . . . . . . . . .$49.99

25693 49 tooth . . . . . . . . . . . . . . . . . .$52.99

25694 51 tooth (repl. OEMs 41470-73 and 41470-78T) . . . . . . . . . . .$49.99

Chrome Sprockets for Sportster® Models from 1982 thru 198509783 47 tooth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$49.99

25696 48 tooth (repl. OEM 41470-82T) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$49.99

09784 49 tooth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$49.99

Chrome Sprockets for Sportster® Models from 1986 thru 1992 (Flat)85134 46-tooth, chrome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$43.99

09785 47 tooth (repl. OEM 41493-90T) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$49.99

09786 48 tooth (repl. OEM 41470-86T) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$49.99

09787 49 tooth (repl. OEM 41492-90T) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$49.99

85138 51 tooth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$37.99

Chrome Sprockets for FXR ModelsFits 1982 thru 1985 FXR models (except FXRT, FXRP) with chain rear drive.25653 46 tooth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$49.99

25654 47 tooth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$49.99

25651 48 tooth (repl. OEM 40954-81) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$49.99

25652 51 tooth (repl. OEM 40954-83) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$49.99

Apparel

Bike Kits& Trailers

Seats & Bags

Foot Controls

Hand Controls

Lighting

Electrical

Exhaust

Intake

Engine

Gaskets

Tranny& Clutch

Driveline


Frames

Forks& Shocks

Sheet-metal

General

CrossReference

12.41

Drive Chains & Rear Sprockets


Chrome-Plated Rear SprocketsFeatures mirror chrome finish andthe rugged durability that CustomChrome® sprockets are known for.Fit 4-speed Big Twins 1973 thru1985 and Sportster® models 1979thru 1981.09794 51 tooth . . . . . . . . . .$52.99

09796 49 tooth . . . . . . . . . .$52.99

09795 48 tooth . . . . . . . . . .$49.99

Chrome-Plated RearSprockets with CutoutsMatch your 1984 to 1991 stockbrake rotors with these brilliantchrome, oval cutout sprockets.Features the rugged durabilitythat Custom Chrome® sprocketsare known for.

Fits 4-speed Big Twins from 1973thru 1985 and Sportster® modelsfrom 1979 thru 1981.09772 51 tooth (repl.

OEM 41470-78) . . . .$49.99

09771 49 tooth . . . . . . . . . .$49.99

09770 48 tooth . . . . . . . . . .$49.99

Fits FXR models (except FXRT andFXRP) with rear chain drive from1982 thru 1985.09773 48 tooth . . . . . . . . . .$49.99

Fits Sportster® models from 1982thru 1985.09774 48 tooth (repl.

OEM 41470-82) . . . .$49.99

Fits Sportster® models from 1986 thru 1992.09775 48 tooth (repl.

OEM 41470-86) . . . .$49.99

20,000 MileWarranty!

RevTech® Nickel-Plated O-Ring ChainsRevTech® chains combine the high-strength and long wear of O-ring design with great looks. Sideplates are nickel-plated for a custom appearance and to prevent rust and corrosion. With top qualityrubber O-rings, case hardened pins, and premium bushings, these chains are backed by our 20,000Mile Limited Warranty against defects in materials or workmanship.59550 530 x 102 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$99.99

59551 530 x 104 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$101.49

59552 530 x 106 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$102.99

59553 530 x 110 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$107.49

59554 530 x 112 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$108.99

59555 530 x 120 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$114.99

59556 RevTech® nickel-plated O-ring master link . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$6.49

Note: Because O-ring chains are slightly wider than standard drive chains, it is imperative that chain clearance to engine andframe components is checked after installation.

20,000 MileWarranty!

C.C. Rider® Heavy-Duty and O-Ring ChainsC.C. Rider® Chains are designed,tested and manufactured exclusive-ly for Custom Chrome® specificallyfor the power demands of Harley-Davidson® motorcycles, and the per-formance demands of the peoplewho ride them. Engineered toexacting standards to guaranteelong life and smooth operation.Aligned and seated pitches elimi-nate initial stretch and early wear.Tight precision assembly withstandshigh impacts and resists kinking.Shaved plate holes eliminate taper-ing and hairline cracks, ensuringeven distribution of stress. Madewith case hardened pins, wide sideplates, and premium bushings.

C.C. Rider® O-Ring Chains20,000 mile Limited Warranty against defects in materials orworkmanship.17405 530 x 102 . . . . . . . . . . .$94.99

17406 530 x 104 . . . . . . . . . . .$96.49

17407 530 x 106 . . . . . . . . . . .$97.99

17408 530 x 110 . . . . . . . . . . .$99.99

17409 530 x 112 . . . . . . . . . .$101.49

17410 530 x 120 . . . . . . . . . .$105.99

Master Link17411 O-Ring clip-style master link

(sold each) . . . . . . . . . .$4.99

Note: Because O-Ring chains are wider thanstandard drive chains, it is imperative thatchain clearance to engine and frame compo-nents are checked after installation.

C.C. Rider® Heavy-Duty ChainsOne Year Warranty against defectsin materials or workmanship.17490 530 x 102 . . . . . . . . . . .$33.99

17491 530 x 104 . . . . . . . . . . .$35.49

17492 530 x 106 . . . . . . . . . . .$36.99

17495 530 x 110 . . . . . . . . . . .$39.99

17496 530 x 112 . . . . . . . . . . .$41.49

17497 530 x 120 . . . . . . . . . . .$47.49

Master LinksMaster links are sold each.17498 Heavy-Duty clip-style

master link . . . . . . . . . .$3.49

17499 Heavy-Duty clip-style half link . . . . . . . . . . . . .$4.99

Driv

eline

12.42

Drive Chain & Accessories

12


080920

080922

080921

Rear Chain Tensioner by LBV EngineeringKeep the slack out of your chain drive Harley andenjoy a better all around riding experience with thiswell made, easy to install chain tensioner. . . . . .$93.99• Long life Urethane roller• Sealed anti-friction bearings• Replaceable roller and bearings• Promotes longer chain and sprocket life• Reduces frequency of chain adjustments• Reduce chain noise and vibration• Reduces chain erosion of inner primary

in electric start models• Promotes smoother shifting080920 Fits 4-speed FL and FX models (except Softail®

models) with chain final drive080921 Fits Softail® models with chain final drive

from 1984 thru 1985080922 Fits Sportster® models with chain final drive

from 1957 thru 1990

Master Link Installation ToolTurns the chore of installing press-fit master link plates into an easyjob. Works equally well on bothstandard and O-ring chains. .$19.9920274 Sold each

Diamond Chain BreakerCompression screw uses a heat-treated steel tip to press outchain pins. It’s recommended that pins be ground off flush toavoid damaging the chain bushing. . . . . . . . . . . . . . . . . . . . .$59.9433037 Replaces OEM 94480-89T

Heavy-Duty Chain BreakerA heavy-duty tool with a heat-treatedpin and folding handle. Works onchain sizes 420 thru 530.20123 Chain breaker . . . . . . . . . .$28.49

20124 Replacement tip . . . . . . . . .$4.44

530ZVX Series Ultra Heavy-Duty Sealed O-Ring Chains by EK Chain The best chain on the market today for V-Twins – available in colors! Great for customizing. Color choiceallows chain to blend-in or stand-out from your bike. Not just another pretty face, EK Ultra Heavy-DutyChain stands-up to the demands of street and strip use. Available in popular lengths, with either chrome orcolored side plates.Features include: • Four-point pin riveting• 10,560 lb. tensile strength• Anti-kink solid bushings• Solid reinforced rollers• Factory packed with high-performance lube• Extra strong x-style o-rings for superior sealing • Clip-style master link included

530 x 106 Chain Size . . . . .$126.99081133 Gold081143 Chrome081153 Red081163 Blue081173 Yellow






Apparel

Bike Kits& Trailers

Seats & Bags

Foot Controls

Hand Controls

Lighting

Electrical

Exhaust

Intake

Engine

Gaskets

Tranny& Clutch

Driveline


Frames

Forks& Shocks

Sheet-metal

General

CrossReference

12.43

Motor Factory® Drive Chain


080990 081119

Motor Factory® Chain by DiamondMotor Factory® premium quality drive chain is manufactured in the USA by Diamond Chain Company. Choosefrom three different types, the workhorse Heavy Duty, the longer lasting XDL, or the top of the line XLO O-ringwhich is available in three different finishes. All are made from the best raw materials and the most modernmanufacturing methods. All include master link.

Heavy DutyA high quality chain produced through a superior manufacturing process. Excellent for most applications at aneconomical price.

XDL ChainDuralube® chain with special oil impregnation process for the pin bushing areas for extended life and betterlubrication than standard chain.

Size Heavy Duty XDL530 x 100 33001 $50.39

530 x 102 33002 $50.44 601356 $69.99

530 x 104 33003 $50.39 601357 $70.99

530 x 106 33004 $51.94 601358 $71.99

530 x 110 33005 $51.94 601359 $73.99

530 x 112 33045 $53.69 601360 $74.99

530 x 120 33014 $56.89 601361 $78.99

Master link each 33006 $1.99 601362 $1.99

Master link 20 pk 33025 $24.99

Spares kit 33038 $13.49

XLO ChainThe XLO series chain is a full 40% stronger than standard chain and features permanentO-ring lubrication that seals in lubricant yet keeps out contaminants. These top of theline chains provide extra load-carrying capability and have a service life that averagesfour times that of a standard chain. Requires less maintenance than standard chains anddue to less stretching, fewer adjustments are required.

Size XLO Black XLO Chrome XLO Gold530 x 102 081102 $112.79 601340 $129.99 601348 $129.99

530 x 104 081104 $114.44 601341 $131.99 601349 $131.99

530 x 106 081106 $115.99 601342 $133.99 601350 $133.99

530 x 110 081110 $121.79 601343 $137.99 601351 $137.99

530 x 112 081112 $110.99 601344 $139.99 601352 $139.99

530 x 120 081120 $131.34 601345 $149.99 601353 $149.99

Master link each 081119 $4.99 601346 $5.99 601354 $5.99

Master link 10 pk 081121 $47.94

Spares kit 080990 $13.99 601347 $16.99 601355 $16.99

Spares KitsSpares kits include two master links, one link, and one half link. See charts for applications and part numbers.

Driv

eline

12.44

Drive Chain Accessories

12


Rear Brake Drum Sprocket and Rivet KitsIncludes sprocket, rivets, and dowel pins.

Late Hydraulic Sprocket Kit19350 Fits 1967 thru 1972 FL and FX

(replaces OEM 41470-67) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$39.49

19322 Rivet and dowel set for CC #19350 (1.020" x .190" rivets) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$5.79

Early (Cast) Hydraulic Sprocket Kit19514 Fits 1962 thru 1966 FL and FLH models

(replaces OEM 41470-62) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$39.49

19321 Rivet and dowel set for CC #19514 (.630 x .195 rivets) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$8.70

Mechanical Sprocket for Big Twin, Sportster® Models51-tooth sprocket with rivets and dowels. Fits 1930-early 1958 OHV BigTwins and 1954 thru 1978 Sportster® and K models.19349 Black. Sprocket kit (replaces OEM 41470-30) . . . . . . . . . . . . . . . . . .$61.94

19320 Rivet and dowel set for CC #19349 . . . . . . . . . . . . . . . . . . . . . . . . . . . .$5.79

36113

36112

36114

Rear Pulley and Sprocket Hardware KitsChrome-plated sockethead hardware kits.36112 Screw and washer kit for the sprocket or pulley on

Sportster® and Big Twins with cast wheels . . . .$22.74

36113 Screw and nut kit for the sprocket on Sportster®

and Big Twin models with spoked wheels . . . .$19.49

36114 Screw and nut kit for the pulley on Big Twin models with spoked wheels from 1980 to present . . .$19.49

72059 Custom hardware kit with flat sockethead screws, countersunk washers and locknuts. Fits FL, FX andSportster® models with chain drive and spokedwheels from 1973 thru 1990 . . . . . . . . . . . . . . . . .$28.99

72060 Custom hardware kit with flat sockethead screws and countersunk washers. Fits FL, FX and Sportster®

models with belt or chain drive and cast wheels from 1973 to present . . . . . . . . . . . . . . . . . . . . . . .$27.49

72061 Custom hardware kit with flat sockethead screws, countersunk washers and locknuts. Fits FXWG and FXRS models with belt drive and spoked wheels from 1985 thru 1999 . . . . . . . . . . . . . . . . . . . . . . . .$28.99

RevTech® Chain LubeBlended for Custom Chrome® by PJ1®, using their world-famous BlueLabel® formula. RevTech® Chain Lube may be used on any type of rear-drive chain, including O-ring chains, and won’t fly off. Thin fluid quicklypenetrates the chain links, converting to a tough film which completelylubricates and protects all critical points of the chain. Most importantly,RevTech® Chain Lube keeps O-rings pliant and flexible, preventing dryingout and cracking. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$4.83 each35097 8 ounces (case of 6 cans)Note: Due to DOT regulations, RevTech® Chain Lube cannot be shipped by air freight.

Apparel

Bike Kits& Trailers

Seats & Bags

Foot Controls

Hand Controls

Lighting

Electrical

Exhaust

Intake

Engine

Gaskets

Tranny& Clutch

Driveline


Frames

Forks& Shocks

Sheet-metal

General

CrossReference

12.45

Chain & Belt Guards


Chrome Ball Milled Aluminum Belt Guard

Ball milled detail on the top surface adds visualinterest to our lightweight chrome-plated

aluminum belt guard. . . . . . . . . . . . . .$55.9947208 Fits all Softail® models

with 70-tooth rear pulleys from 1986 thru 1999

Chrome Chain Guards for Swingarm ModelsStock replacement and custom chain guards are precisely engineered tobolt-on in minutes.

For FL and FX Models12306 Custom chain guard for swingarm 4-speed Big Twins

(except Softail® models) from 1973 thru 1985 . . . . . . . . . . . . . . . . .$37.99

12309 Stock replacement for 4-speed FX models (except Softail®

models) from 1973 thru 1985 (repl. OEM 60302-73T) . . . . . . . . . .$42.49

12317 Stock replacement chain guard for Softail® models from 1984 thru 1985 (repl. OEM 60639-84) . . . . . . . . . . . . . . . . . . . .$55.99

For Sportster® Models12307 Custom chain guard for 1967 thru 1978 XLH,

and 1970 thru 1978 XLCH models . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$32.99

12308 Custom chain guard for 1979 thru 1981 Sportster® models . . . . .$55.09

12311 Stock replacement chain guard for 1983 thru 1987 Sportster® models except 1987 Hugger® models (replaces OEMs 60375-83, 91777-85) . . . . . . . . . . . . . . . . . . . . . . . . . .$51.49

12318 Stock replacement chain guard for 1988 thru 1990 Sportster® models and 1987 Hugger® models (replaces OEMs 60365-87, 60405-87) . . . . . . . . . . . . . . . . . . . . . . . . . .$55.99

For FXR Models12315 Stock replacement chain guard for 1982 thru 1984

FXR models (except FXRT) and 1986 FXR Super Glide® models(replaces OEMs 60640-86, 60607-81A) . . . . . . . . . . . . . . . . . . . . . . . .$52.99

12308

12311

12307

12318

12317

12309

12306

12315

28238

28239

Louvered Chrome Chain Guards for Swingarm ModelsThe same high-quality chain guards we sell as Original Equipment replace-ments, but with the added styling feature of louvers in the upper surface.28238 Fits 4-speed FX models (except Softail® models)

from 1973 thru 1985 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$54.84

28239 Fits 1988 thru 1990 Sportster® models and 1987 Hugger® models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$54.99

Chain Guards for Hardtails and Rigid FramesWith mounting tabs for quick bolt-up adapta-tion to most hardtails and custom rigid frames.12554 Fits hardtail Big Twins . . . . . . . . . .$41.99

19386 Fits rigid framed Big Twins . . . . . .$32.94

19386

12554

12310

28231

Chrome ‘Full Dress’ Chain GuardsChrome reproductions of classic ‘Dresser’ rear chain guards for 4-speed FLmodels from 1963 thru 1984. Bolts directly onto 4-speed, chain drive mod-els (except Softail® models) 1971 thru 1985. Accurate to the original withheavy-gauge construction, fully rolled edges, inspection cover relief andfront mount bushing.12310 Standard chain guard (repl. OEM 60302-63T) . . . . . . . . . . . . . . . . . .$55.99

28231 Louvered chain guard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$70.89

25548 Replacement mounting grommet (repl. OEM 11411) pack of 10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$13.99

Chrome Belt Guards for 5-Speed Sportster® ModelsMade of heavy-gauge stamped steel, these guards keep your belt clean andyour bike looking good. Fits all 5-speed Sportster® models from 1991 thru 2003.12639 Upper guard 1991 thru 1999 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$57.19

28242 Lower guard 1991 thru 2003 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$55.99

28242

12639

Driv

eline

12.46

Belt Guards

12


‘Ribbed’ Belt Guard for Softail® ModelsEasy-to-install steel belt guard with a show-quality chrome-plated finish.Includes hardware and a reinforcing tab. . . . . . . . . . . . . . . . . . . . . . . . . . . . .$69.9912667 Fits belt drive Softail® models with stock 70-tooth pulleys

from 1986 thru 1992

‘Shorty’ Belt Guard for Softail® ModelsShow off more of your pulley and wheel with this chrome-plated steelupper belt guard. Complete with chrome hardware and a special T-nut thatpermits use with various pulley sizes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$57.4912695 Fits all Softail® models from 1986 thru 1999

‘Shorty’ Steel BeltGuards by LandmarkHeavy-gauge steel guards aresmall enough to prevent stufffrom getting in the rear pulley, yetaccent custom pulleys. Made in theUSA to fit Softail® models with 70-tooth pulleys from 1984 thru 1999.14110 Polished stainless steel . .$31.99

14091 Chrome steel . . . . . . . .$65.49

Polished Stainless Steel Upper Belt Guards by ZCBShow off more of your pulley withthese polished stainless steel upperbelt guard. They fit all Evolution®

and Twin Cam 88® Softail®

models. . . . . . . . . . . . . . . . . . . . .$134.7986670 Fits models with 65 tooth

rear pulleys86671 Fits models with 70 tooth

rear pulleys

12667

080308

080330

Chrome Lower Belt Guards for Softail® ModelsChrome steel belt guards for Softail® models from 1986 thru 1999. Availableplain or with louvers.

Plain080308 With “Belt Drive” logo for Softail® models from 1986 thru 1992

with 70 tooth rear pulleys (repl. OEMs 60362-86A, 60366-89) . .$37.99

080330 Fits International Softail® models from 1988 thru 1999 and US models from 1993 thru 1999 with 61 tooth rear pulleys (repl. OEM 60415-89B) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$42.99

Louvered080332 Fits Softail® models from 1995 thru 1999 with 65 tooth

rear pulleys (repl. OEM 60415-89B) . . . . . . . . . . . . . . . . . . . . . . . . . . .$39.99

Chrome Upper and Lower Belt GuardsAll Custom Chrome® belt guards are made of heavily chrome-plated steel, and are designed for simple, bolt-on installation.

For FXR and FLT/FLHT Models12314 Upper belt guard for FXR models from 1985 thru 1986, and 1987

thru 1992 FXRTs (repl. OEMs 60299-85, 91774-85) . . . . . . . . . . . . .$55.99

12304 Upper belt guard for FXR models (except FXRT) from 1987 thru 1994 (repl. OEMs 60297-87, 91739-87) . . . . . . . . . . . . . . . . . . .$61.49

12312 Lower belt guard for FXR and Touring models from 1985 thru 2001 (repl. OEM 60397-85) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$59.99

For FL and FX Models12313 Upper belt guard for 4-speed models from 1980 thru 1986

(repl. OEMs 60388-82, 60380-79) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$45.99

12303 Upper belt guard for Softail® models from 1986 thru 1992 (repl. OEM 60533-86) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$69.84

12305 Lower belt guard for Softail® models with 70-tooth pulleys from 1986 thru 1994 (repl. OEMs 60366-89, 60362-86) . . . . . . . . .$51.49

63136 Lower belt guard for Softail® models with 65-tooth pulleys from 1994 thru 1999 (repl. OEM 60389-97A) not shown . . . . . . .$45.94

12305

12314

12303

12313

12312

Driveline 12 - Custom Bikes by Mike 12.pdf · Complete RevTech ® Drive Train Kits ... the engine...

Documents

Transcript of Driveline 12 - Custom Bikes by Mike 12.pdf · Complete RevTech ® Drive Train Kits ... the engine...