Drippers and dripperlines global master technical data
-
Upload
carlos-rovello -
Category
Engineering
-
view
118 -
download
2
Transcript of Drippers and dripperlines global master technical data
Pressure Compensated drippers UniRam™
UniRam dripper , RC (row crops) model Nominal flow rate Working pressure Water passages dimensions Filtration area Constant Exponent* Cross section
(l/h) range ( bar) Width (mm) Depth (mm) Length (mm) (mm2) K x (mm
2)
0.7 0.70 0.65 40 110 0.7 0 0.46
1.0 0.83 0.74 40 130 1.0 0 0.61
1.6 1.07 0.79 40 130 1.6 0 0.85
2.3 1.26 0.95 40 130 2.3 0 1.20
3.5 1.59 1.10 40 150 3.5 0 1.75
* within the working pressure range
UniRam dripper , AS (anti-siphon) model and AS XRNominal flow rate Working pressure Water passages dimensions Filtration area Constant Exponent* Cross section
(l/h) range ( bar) Width (mm) Depth (mm) Length (mm) (mm2) K x (mm
2)
0.7 0.70 0.65 40 110 0.7 0 0.46
1.0 0.83 0.74 40 130 1.0 0 0.61
1.6 1.07 0.79 40 130 1.6 0 0.85
2.3 1.26 0.95 40 130 2.3 0 1.20
3.5 1.59 1.10 40 150 3.5 0 1.75
* within the working pressure range
UniRam dripper , CNL (anti-drain) model and CNL XRNominal flow rate Working pressure Water passages dimensions Filtration area Constant Exponent* Shut off
(l/h) range ( bar) Width (mm) Depth (mm) Length (mm) (mm2) K x pressure (bar)
0.7 0.70 0.65 40 110 0.7 0 0.14
1.0 0.83 0.74 40 130 1.0 0 0.14
1.6 1.07 0.79 40 130 1.6 0 0.14
2.3 1.26 0.95 40 130 2.3 0 0.14
3.5 1.59 1.10 40 150 3.5 0 0.14
* within the working pressure range
UniRam dripper , HCNL (anti-drain) modelNominal flow rate Working pressure Water passages dimensions Filtration area Constant Exponent* Shut off
(l/h) range ( bar) Width (mm) Depth (mm) Length (mm) (mm2) K x pressure (bar)
0.85 0.70 0.65 40 110 0.85 0 0.25
1.25 0.83 0.74 40 130 1.25 0 0.25
2.0 1.07 0.79 40 130 2.0 0 0.25
2.9 1.26 0.95 40 130 2.9 0 0.25
4.4 1.59 1.10 40 150 4.4 0 0.25
* within the working pressure range
Dripperline technical data - UniRamWall thickness Outside diameter
(mm) (mm)
16009 14.20 0.9 16.00 3.0 1.3 3.9
16010 14.20 1.0 16.20 3.5 1.3 4.6
16012 14.20 1.2 16.60 4.0 1.3 5.2
17012 14.60 1.2 17.00 4.0 1.1 5.2
20010 17.50 1.0 19.50 3.5 0.4 4.6
20012 17.50 1.2 19.90 4.0 0.4 5.2
23010 20.80 1.0 22.80 3.0 0.3 3.5
27010 25.00 1.0 27.00 3.0 0.1 3.5
Maximum flushing
pressure ( bar)
KDModel Inside diameter
(mm)
Maximum working
pressure (bar)
0.5 - 4.0
0.5 - 4.0
1.0 - 4.0
1.5 - 4.0
010101 Global Master technical data 160302 UniRam 06/03/2016
Pressure Compensated drippers DripNet PC™
DripNet PC dripper Nominal flow rate Working pressure Water passages dimensions Filtration area Constant Exponent* Cross section
(l/h) range ( bar) Width (mm) Depth (mm) Length (mm) (mm2) K x (mm
2)
0.4 0.25 - 2.5 0.46 0.52 26 29 0.4 0 0.24
0.6 0.25 - 2.5 0.52 0.60 22 39 0.6 0 0.31
1.0 0.40 - 3.0 0.61 0.60 8 39 1.0 0 0.37
1.6 0.40 - 3.0 0.76 0.73 8 39 1.6 0 0.55
2.0 0.40 - 3.5 0.84 0.8 8 39 2.0 0 0.67
3.0 0.40 - 3.5 1.02 0.88 8 39 3.0 0 0.90
3.8 0.60 - 3.5 1.02 0.88 8 39 3.8 0 0.90
* into the working pressure range
DripNet PC AS dripper Nominal flow rate Working pressure Water passages dimensions Filtration area Constant Exponent* Cross section
(l/h) range ( bar) Width (mm) Depth (mm) Length (mm) (mm2) K x (mm
2)
0.6 0.25 - 2.5 0.52 0.60 22 42 0.6 0 0.31
1.0 0.40 - 3.0 0.61 0.60 8 42 1.0 0 0.37
1.6 0.40 - 3.0 0.76 0.73 8 42 1.6 0 0.55
2.0 0.40 - 3.5 0.84 0.8 8 42 2.0 0 0.67
3.0 0.40 - 3.5 1.02 0.88 8 42 3.0 0 0.90
3.8 0.60 - 3.5 1.02 0.88 8 42 3.8 0 0.90
* into the working pressure range
Dripperline technical data - DripNet PCWall thickness Outside diameter
(mm) (mm)
12125 11.80 0.31 12.42 2.5 1.35 2.9
12150 11.80 0.38 12.56 3.0 1.35 3.5
12200 11.80 0.50 12.80 3.0 1.35 3.9
12250 11.80 0.63 13.06 3.0* 1.35 3.9
16125 16.20 0.31 16.82 1.8 0.40 2.1
16150 16.20 0.38 16.96 2.2 0.40 2.5
16200 15.50 0.50 16.50 2.5 0.40 3.3
16250 15.50 0.63 16.76 2.8 0.40 3.6
16009 14.20 0.90 16.00 3.0* 0.72 3.9
16010 14.20 1.00 16.20 3.0* 0.72 3.9
16012 14.20 1.20 16.60 3.0* 0.72 3.9
20010 17.50 1.00 19.50 3.0* 0.25 3.9
20012 17.50 1.20 19.90 3.0* 0.25 3.9
23009 20.80 0.90 22.60 3.0* 0.20 3.5
22135 22.20 0.34 22.88 1.5 0.18 1.7
22150 22.20 0.38 22.96 1.8 0.18 2.1
22250 22.20 0.63 23.46 2.5 0.18 2.9
25135 25.00 0.34 25.68 1.2 0.04 1.4
25150 25.00 0.38 25.76 1.4 0.04 1.6
25250 25.00 0.63 26.26 2.0 0.04 2.3*Maximum working pressure is defined by the dripper and not by the dripperline wall thickness
Maximum flushing
pressure ( bar)
KDModel Inside diameter
(mm)
Maximum working
pressure (bar)
010101 Global Master technical data 160302 DripNet PC 06/03/2016
Integral drippers Tiran™
Tiran dripper (short) in pipes with 1.2 mm. wall thicknessNominal* flow rate Max. working Water passages dimensions Filtration area Constant Exponent* Cross section Flow rate (l/h) vs Pressure (meter)
(l/h) pressure (bar) Width (mm) Depth (mm) Length (mm) (mm2) K x (mm
2) 2 4 6 8 10 15 20 25 30 35 40
1.05 0.60 0.80 75 70 0.364 0.46 0.480 0.50 0.69 0.83 0.95 1.05 1.27 1.44 1.60 1.74 1.87 1.99
1.60 0.73 0.85 75 70 0.555 0.46 0.621 0.76 1.05 1.27 1.44 1.60 1.93 2.20 2.44 2.65 2.85 3.03
2.10 0.76 1.08 75 70 0.728 0.46 0.821 1.00 1.38 1.66 1.89 2.10 2.53 2.89 3.20 3.48 3.74 3.97
4.20 1.06 1.40 75 76 1.456 0.46 1.484 2.00 2.75 3.32 3.79 4.20 5.06 5.78 6.40 6.96 7.47 7.95
8.40 1.68 1.40 37 76 2.913 0.46 2.352 4.01 5.51 6.64 7.58 8.40 10.12 11.56 12.81 13.93 14.95 15.90
*Flow rate at 1.0 bar pressure
Tiran dripper (short) in pipes with 1.0 mm. wall thicknessNominal* flow rate Max. working Water passages dimensions Filtration area Constant Exponent* Cross section Flow rate (l/h) vs Pressure (meter)
(l/h) pressure (bar) Width (mm) Depth (mm) Length (mm) (mm2) K x (mm
2) 2 4 6 8 10 15 20 25 30 35 40
1.00 0.60 0.80 75 70 0.348 0.46 0.480 0.48 0.66 0.79 0.91 1.00 1.21 1.38 1.53 1.66 1.79 1.90
1.50 0.73 0.85 75 70 0.520 0.46 0.621 0.72 0.98 1.19 1.35 1.50 1.81 2.06 2.29 2.49 2.67 2.84
2.00 0.76 1.08 75 70 0.693 0.46 0.821 0.95 1.31 1.58 1.80 2.00 2.41 2.75 3.05 3.31 3.56 3.78
4.00 1.06 1.40 75 76 1.387 0.46 1.484 1.91 2.62 3.16 3.61 4.00 4.82 5.50 6.10 6.63 7.12 7.57
8.00 1.68 1.40 37 76 2.774 0.46 2.352 3.82 5.25 6.32 7.22 8.00 9.64 11.00 12.19 13.26 14.24 15.14
*Flow rate at 1.0 bar pressure
Tiran dripper (short) in pipes with 0.9 mm. wall thicknessNominal* flow rate Max. working Water passages dimensions Filtration area Constant Exponent* Cross section Flow rate (l/h) vs Pressure (meter)
(l/h) pressure (bar) Width (mm) Depth (mm) Length (mm) (mm2) K x (mm
2) 2 4 6 8 10 15 20 25 30 35 40
1.00 0.60 0.80 75 70 0.348 0.46 0.480 0.48 0.66 0.79 0.91 1.00 1.21 1.38 1.53 1.66 1.79 1.90
1.50 0.73 0.85 75 70 0.520 0.46 0.621 0.72 0.98 1.19 1.35 1.50 1.81 2.06 2.29 2.49 2.67 2.84
2.00 0.76 1.08 75 70 0.693 0.46 0.821 0.95 1.31 1.58 1.80 2.00 2.41 2.75 3.05 3.31 3.56 3.78
4.00 1.06 1.40 75 76 1.387 0.46 1.484 1.91 2.62 3.16 3.61 4.00 4.82 5.50 6.10 6.63 7.12 7.57
8.00 1.68 1.40 37 76 2.774 0.46 2.352 3.82 5.25 6.32 7.22 8.00 9.64 11.00 12.19 13.26 14.24 15.14
*Flow rate at 1.0 bar pressure
Dripperline technical data - TiranWall thickness Outside diameter
(mm) (mm)
12010 10.30 1.0 12.30 4.0 0.70 5.2
16009 14.20 0.9 16.00 3.0 0.40 3.9
16010 14.20 1.0 16.20 3.5 0.40 4.6
16012 14.20 1.2 16.60 4.0 0.40 5.2
17012 14.60 1.2 17.00 4.0 0.35 5.2
20010 17.50 1.0 19.50 3.5 0.10 4.6
20012 17.50 1.2 19.90 4.0 0.10 5.2
23009 20.80 0.9 22.60 3.0 0.07 3.9
Maximum flushing
pressure ( bar)
KDModel Inside diameter
(mm)
Maximum working
pressure (bar)
4.0
3.5
3.0
010101 Global Master technical data 160302 Tiran 06/03/2016
Integral drippers Aries™
Aries dripper in pipes with 1.2 mm. wall thicknessNominal* flow rate Max. working Water passages dimensions Filtration area Constant Exponent Cross section Flow rate (l/h) vs Pressure (meter)
(l/h) pressure (bar) Width (mm) Depth (mm) Length (mm) (mm2) K x (mm
2) 2 4 6 8 10 15 20 25 30 35 40
1.05 0.60 0.74 65 45 0.364 0.46 0.44 0.50 0.69 0.83 0.95 1.05 1.27 1.44 1.60 1.74 1.87 1.99
1.60 0.71 0.85 65 48 0.554 0.46 0.60 0.76 1.05 1.26 1.44 1.60 1.93 2.20 2.44 2.65 2.84 3.02
2.10 0.76 1.03 65 51 0.728 0.46 0.78 1.00 1.38 1.66 1.89 2.10 2.53 2.89 3.20 3.48 3.74 3.97
3.15 0.90 1.20 65 51 1.092 0.46 1.08 1.50 2.07 2.49 2.84 3.15 3.80 4.33 4.80 5.22 5.60 5.96
4.20 0.94 1.28 33 51 1.455 0.46 1.20 2.00 2.75 3.32 3.79 4.20 5.06 5.77 6.40 6.96 7.47 7.94
*Flow rate at 1.0 bar pressure
Aries dripper in pipes with 1.0 mm. wall thicknessNominal* flow rate Max. working Water passages dimensions Filtration area Constant Exponent Cross section Flow rate (l/h) vs Pressure (meter)
(l/h) pressure (bar) Width (mm) Depth (mm) Length (mm) (mm2) K x (mm
2) 2 4 6 8 10 15 20 25 30 35
1.00 0.60 0.74 65 45 0.347 0.46 0.44 0.48 0.66 0.79 0.90 1.00 1.21 1.38 1.53 1.66 1.78
1.50 0.71 0.85 65 48 0.520 0.46 0.60 0.72 0.98 1.19 1.35 1.50 1.81 2.06 2.29 2.49 2.67
2.00 0.76 1.03 65 51 0.693 0.46 0.78 0.95 1.31 1.58 1.80 2.00 2.41 2.75 3.05 3.31 3.56
3.00 0.90 1.20 65 51 1.040 0.46 1.08 1.43 1.97 2.37 2.71 3.00 3.61 4.13 4.57 4.97 5.34
4.00 0.94 1.28 33 51 1.387 0.46 1.20 1.91 2.62 3.16 3.61 4.00 4.82 5.50 6.10 6.63 7.12
*Flow rate at 1.0 bar pressure
Aries dripper in pipes with 0.9 mm. wall thicknessNominal* flow rate Max. working Water passages dimensions Filtration area Constant Exponent Cross section Flow rate (l/h) vs Pressure (meter)
(l/h) pressure (bar) Width (mm) Depth (mm) Length (mm) (mm2) K x (mm
2) 2 4 6 8 10 15 20 25 30
1.00 0.60 0.74 65 45 0.347 0.46 0.44 0.48 0.66 0.79 0.90 1.00 1.21 1.38 1.53 1.66
1.50 0.71 0.85 65 48 0.520 0.46 0.60 0.72 0.98 1.19 1.35 1.50 1.81 2.06 2.29 2.49
2.00 0.76 1.03 65 51 0.693 0.46 0.78 0.95 1.31 1.58 1.80 2.00 2.41 2.75 3.05 3.31
3.00 0.90 1.20 65 51 1.040 0.46 1.08 1.43 1.97 2.37 2.71 3.00 3.61 4.13 4.57 4.97
4.00 0.94 1.28 33 51 1.387 0.46 1.20 1.91 2.62 3.16 3.61 4.00 4.82 5.50 6.10 6.63
*Flow rate at 1.0 bar pressure
Aries dripper in pipes with 0.8 mm. wall thicknessNominal* flow rate Max. working Water passages dimensions Filtration area Constant Exponent Cross section Flow rate (l/h) vs Pressure (meter)
(l/h) pressure (bar) Width (mm) Depth (mm) Length (mm) (mm2) K x (mm
2) 2 4 6 8 10 15 20 25 30
1.00 0.60 0.74 65 45 0.347 0.46 0.44 0.48 0.66 0.79 0.90 1.00 1.21 1.38 1.53 1.66
1.50 0.71 0.85 65 48 0.520 0.46 0.60 0.72 0.98 1.19 1.35 1.50 1.81 2.06 2.29 2.49
2.00 0.76 1.03 65 51 0.693 0.46 0.78 0.95 1.31 1.58 1.80 2.00 2.41 2.75 3.05 3.31
3.00 0.90 1.20 65 51 1.040 0.46 1.08 1.43 1.97 2.37 2.71 3.00 3.61 4.13 4.57 4.97
4.00 0.94 1.28 33 51 1.387 0.46 1.20 1.91 2.62 3.16 3.61 4.00 4.82 5.50 6.10 6.63
*Flow rate at 1.0 bar pressure
Aries dripper in pipes with 0.7 mm. wall thicknessNominal* flow rate Max. working Water passages dimensions Filtration area Constant Exponent Cross section Flow rate (l/h) vs Pressure (meter)
(l/h) pressure (bar) Width (mm) Depth (mm) Length (mm) (mm2) K x (mm
2) 2 4 6 8 10 15 20 25 30
1.00 0.60 0.74 65 45 0.347 0.46 0.44 0.48 0.66 0.79 0.90 1.00 1.21 1.38 1.53 1.66
1.40 0.71 0.85 65 48 0.485 0.46 0.60 0.67 0.92 1.11 1.26 1.40 1.69 1.92 2.13 2.32
1.90 0.76 1.03 65 51 0.659 0.46 0.78 0.91 1.25 1.50 1.72 1.90 2.29 2.61 2.90 3.15
2.85 0.90 1.20 65 51 0.988 0.46 1.08 1.36 1.87 2.25 2.57 2.85 3.43 3.92 4.34 4.72
3.80 0.94 1.28 33 51 1.316 0.46 1.20 1.81 2.49 3.00 3.43 3.80 4.57 5.22 5.79 6.29
*Flow rate at 1.0 bar pressure
Aries dripper in pipes with 0.63 mm. wall thicknessNominal* flow rate Max. working Water passages dimensions Filtration area Constant Exponent Cross section Flow rate (l/h) vs Pressure (meter)
(l/h) pressure (bar) Width (mm) Depth (mm) Length (mm) (mm2) K x (mm
2) 2 4 6 8 10 15 20 25 30
1.00 0.60 0.74 65 45 0.347 0.46 0.44 0.48 0.66 0.79 0.90 1.00 1.21 1.38 1.53 1.66
1.40 0.71 0.85 65 48 0.485 0.46 0.60 0.67 0.92 1.11 1.26 1.40 1.69 1.92 2.13 2.32
1.90 0.76 1.03 65 51 0.659 0.46 0.78 0.91 1.25 1.50 1.72 1.90 2.29 2.61 2.90 3.15
2.85 0.90 1.20 65 51 0.988 0.46 1.08 1.36 1.87 2.25 2.57 2.85 3.43 3.92 4.34 4.72
3.80 0.94 1.28 33 51 1.316 0.46 1.20 1.81 2.49 3.00 3.43 3.80 4.57 5.22 5.79 6.29
*Flow rate at 1.0 bar pressure
Aries dripper in pipes with 0.5 mm. wall thicknessNominal* flow rate Max. working Water passages dimensions Filtration area Constant Exponent Cross section Flow rate (l/h) vs Pressure (meter)
(l/h) pressure (bar) Width (mm) Depth (mm) Length (mm) (mm2) K x (mm
2) 2 4 6 8 10 15 20 25 30
1.00 0.60 0.74 65 45 0.347 0.46 0.44 0.48 0.66 0.79 0.90 1.00 1.21 1.38 1.53 1.66
1.40 0.71 0.85 65 48 0.485 0.46 0.60 0.67 0.92 1.11 1.26 1.40 1.69 1.92 2.13 2.32
1.90 0.76 1.03 65 51 0.659 0.46 0.78 0.91 1.25 1.50 1.72 1.90 2.29 2.61 2.90 3.15
2.85 0.90 1.20 65 51 0.988 0.46 1.08 1.36 1.87 2.25 2.57 2.85 3.43 3.92 4.34 4.72
3.80 0.94 1.28 33 51 1.316 0.46 1.20 1.81 2.49 3.00 3.43 3.80 4.57 5.22 5.79 6.29
*Flow rate at 1.0 bar pressure
2.5
2.9
2.8
4.0
3.5
3.0
3.0
010101 Global Master technical data 160302 Aries 06/03/2016
Aries dripper in pipes with 0.38 mm. wall thicknessNominal* flow rate Max. working Water passages dimensions Filtration area Constant Exponent Cross section Flow rate (l/h) vs Pressure (meter)
(l/h) pressure (bar) Width (mm) Depth (mm) Length (mm) (mm2) K x (mm
2) 2 4 6 8 10 15 20 22
0.95 0.60 0.74 65 45 0.329 0.46 0.44 0.45 0.62 0.75 0.86 0.95 1.14 1.31 1.36
1.35 0.71 0.85 65 48 0.468 0.46 0.60 0.64 0.89 1.07 1.22 1.35 1.63 1.86 1.94
1.85 0.76 1.03 65 51 0.641 0.46 0.78 0.88 1.21 1.46 1.67 1.85 2.23 2.54 2.66
2.80 0.90 1.20 65 51 0.971 0.46 1.08 1.34 1.84 2.21 2.53 2.80 3.37 3.85 4.02
3.80 0.94 1.28 33 51 1.318 0.46 1.20 1.81 2.49 3.01 3.43 3.80 4.58 5.23 5.46
*Flow rate at 1.0 bar pressure ** 16mm/22mm dripperline
Aries dripper in pipes with 0.34 mm. wall thicknessNominal* flow rate Max. working Water passages dimensions Filtration area Constant Exponent Cross section Flow rate (l/h) vs Pressure (meter)
(l/h) pressure (bar) Width (mm) Depth (mm) Length (mm) (mm2) K x (mm
2) 2 4 6 8 10 15 20 22
0.95 0.60 0.74 65 45 0.329 0.46 0.44 0.45 0.62 0.75 0.86 0.95 1.14 1.31 1.36
1.35 0.71 0.85 65 48 0.468 0.46 0.60 0.64 0.89 1.07 1.22 1.35 1.63 1.86 1.94
1.85 0.76 1.03 65 51 0.641 0.46 0.78 0.88 1.21 1.46 1.67 1.85 2.23 2.54 2.66
2.80 0.90 1.20 65 51 0.971 0.46 1.08 1.34 1.84 2.21 2.53 2.80 3.37 3.85 4.02
3.80 0.94 1.28 33 51 1.318 0.46 1.20 1.81 2.49 3.01 3.43 3.80 4.58 5.23 5.46
*Flow rate at 1.0 bar pressure ** 22mm dripperline
Aries dripper in pipes with 0.31 mm. wall thicknessNominal* flow rate Max. working Water passages dimensions Filtration area Constant Exponent Cross section Flow rate (l/h) vs Pressure (meter)
(l/h) pressure (bar) Width (mm) Depth (mm) Length (mm) (mm2) K x (mm
2) 2 4 6 8 10 15 20 22
0.95 0.60 0.74 65 45 0.329 0.46 0.44 0.45 0.62 0.75 0.86 0.95 1.14 1.31 1.36
1.35 0.71 0.85 65 48 0.468 0.46 0.60 0.64 0.89 1.07 1.22 1.35 1.63 1.86 1.94
1.85 0.76 1.03 65 51 0.641 0.46 0.78 0.88 1.21 1.46 1.67 1.85 2.23 2.54 2.66
2.80 0.90 1.20 65 51 0.971 0.46 1.08 1.34 1.84 2.21 2.53 2.80 3.37 3.85 4.02
3.80 0.94 1.28 33 51 1.318 0.46 1.20 1.81 2.49 3.01 3.43 3.80 4.58 5.23 5.46
*Flow rate at 1.0 bar pressure ** 16mm/22mm dripperline
Dripperline technical data - AriesWall thickness Outside diameter
(mm) (mm)
12125 11.80 0.31 12.42 2.5 0.40 3.3
12150 11.80 0.38 12.56 3.0 0.40 3.9
12200 11.80 0.50 12.80 3.0 0.40 3.9
12250 11.80 0.63 13.06 3.5 0.40 4.6
12007 10.60 0.70 11.90 3.5 0.70 4.6
12009 10.20 0.90 13.00 3.8 0.70 4.9
12010 10.30 1.00 12.30 4.0 0.70 5.2
16125 16.20 0.31 16.82 1.8 0.30 2.3
16150 16.20 0.38 16.96 2.2 0.30 2.9
16200 15.50 0.50 16.50 2.5 0.30 3.3
16250 15.50 0.63 16.76 2.8 0.30 3.6
16007 15.50 0.70 16.90 2.9 0.30 3.8
16008 15.50 0.80 17.10 3.0 0.30 3.9
16009 14.20 0.90 16.00 3.0 0.40 3.9
16010 14.20 1.00 16.20 3.5 0.40 4.6
16012 14.20 1.20 16.60 4.0 0.40 5.2
20010 17.50 1.00 19.50 3.5 0.10 4.6
20012 17.50 1.20 19.90 4.0 0.10 5.2
22125 22.20 0.31 22.82 1.5 0.06 2.0
22135 22.20 0.34 22.88 1.6 0.06 2.1
22150 22.20 0.38 22.96 1.8 0.06 2.3
22200 22.20 0.50 23.20 2.0 0.06 2.6
22250 22.20 0.63 23.56 2.5 0.06 3.3
23009 20.80 0.90 22.60 3.0 0.07 3.9
25200 25.00 0.50 26.00 1.6 0.05 2.1
Maximum flushing
pressure ( bar)
Model Inside diameter
(mm)
Maximum working
pressure (bar)
KD
2.2/1.8**
1.8/1.5**
1.6**
010101 Global Master technical data 160302 Aries 06/03/2016
Integral drippers Super Typhoon™
Typhoon in pipes with 0.38 mm. wall thickness (S.Typhoon 150) Nominal* flow rate Max. working Water passages dimensions Filtration area Constant Exponent Cross section Flow rate (l/h) vs Pressure (meter)
(l/h) pressure (bar) Width (mm) Depth (mm) Length (mm) (mm2) K x (mm
2) 4 7 10 13 16 19 22 25 28 30
0.80 3.0/2.2 0.55 0.63 40 26 0.284 0.45 0.35 0.53 0.68 0.80 0.90 0.99 1.07 1.14 1.21 1.27 1.31
1.05 3.0/2.2 0.63 0.51 23 26 0.373 0.45 0.32 0.70 0.90 1.05 1.18 1.30 1.40 1.50 1.59 1.67 1.72
1.65 3.0/2.2 0.79 0.60 23 34 0.546 0.48 0.47 1.06 1.39 1.65 1.87 2.07 2.24 2.41 2.56 2.70 2.79
2.70 3.0/2.2 0.95 0.85 23 35 0.894 0.48 0.81 1.74 2.28 2.70 3.06 3.38 3.67 3.94 4.19 4.43 4.57
*Flow rate at 1.0 bar pressure **According to dripperlines inside diameter
Typhoon in pipes with 0.31 mm. wall thickness (S.Typhoon 125) Nominal* flow rate Max. working Water passages dimensions Filtration area Constant Exponent Cross section Flow rate (l/h) vs Pressure (meter)
(l/h) pressure (bar) Width (mm) Depth (mm) Length (mm) (mm2) K x (mm
2) 4 6 8 10 12 14 16 18 20 22
0.80 2.5/1.8 0.55 0.63 40 26 0.284 0.45 0.35 0.53 0.64 0.72 0.80 0.87 0.93 0.99 1.04 1.09 1.14
1.10 2.5/1.8 0.63 0.51 23 26 0.390 0.45 0.32 0.73 0.87 0.99 1.10 1.19 1.28 1.36 1.43 1.50 1.57
1.60 2.5/1.8 0.79 0.60 23 34 0.529 0.48 0.47 1.03 1.25 1.44 1.60 1.74 1.88 2.00 2.12 2.23 2.33
2.70 2.5/1.8 0.95 0.85 23 35 0.894 0.48 0.81 1.74 2.11 2.43 2.70 2.95 3.17 3.38 3.58 3.77 3.94
*Flow rate at 1.0 bar pressure **According to dripperlines inside diameter
Typhoon in pipes with 0.25 mm. wall thickness (S.Typhoon 100) Nominal* flow rate Max. working Water passages dimensions Filtration area Constant Exponent Cross section Flow rate (l/h) vs Pressure (meter)
(l/h) pressure (bar) Width (mm) Depth (mm) Length (mm) (mm2) K x (mm
2) 3 4 5 6 7 8 9 10 11 12
0.80 0.55 0.63 40 26 0.284 0.45 0.35 0.47 0.53 0.59 0.64 0.68 0.72 0.76 0.80 0.84 0.87
1.10 0.63 0.51 23 26 0.390 0.45 0.32 0.64 0.73 0.80 0.87 0.94 0.99 1.05 1.10 1.15 1.19
1.60 0.79 0.60 23 34 0.529 0.48 0.47 0.90 1.03 1.15 1.25 1.35 1.44 1.52 1.60 1.67 1.74
2.70 0.95 0.85 23 35 0.894 0.48 0.81 1.51 1.74 1.94 2.11 2.28 2.43 2.57 2.70 2.83 2.95
*Flow rate at 1.0 bar pressure
Typhoon in pipes with 0.20 mm. wall thickness (S.Typhoon 80) Nominal* flow rate Max. working Water passages dimensions Filtration area Constant Exponent Cross section Flow rate (l/h) vs Pressure (meter)
(l/h) pressure (bar) Width (mm) Depth (mm) Length (mm) (mm2) K x (mm
2) 1 2 3 4 5 6 7 8 9 10
0.80 0.55 0.63 40 26 0.284 0.45 0.35 0.28 0.39 0.47 0.53 0.59 0.64 0.68 0.72 0.76 0.80
1.10 0.63 0.51 23 26 0.390 0.45 0.32 0.39 0.53 0.64 0.73 0.80 0.87 0.94 0.99 1.05 1.10
1.65 0.79 0.60 23 34 0.546 0.48 0.47 0.55 0.76 0.93 1.06 1.18 1.29 1.39 1.48 1.57 1.65
2.70 0.95 0.85 23 35 0.894 0.48 0.81 0.89 1.25 1.51 1.74 1.94 2.11 2.28 2.43 2.57 2.70
*Flow rate at 1.0 bar pressure
Dripperline technical data - Super TyphoonWall thickness
(mm)
12125 11.80 0.31 12.42 2.5 0.25 2.9
12150 11.80 0.38 12.56 3.0 0.25 3.5
12200 11.80 0.50 12.80 3.0 0.25 3.9
12250 11.80 0.63 13.06 3.5 0.25 4.6
16080 16.20 0.20 16.60 1.0 0.10 1.2
16100 16.20 0.25 16.70 1.2 0.10 1.4
16125 16.20 0.31 16.82 1.8 0.10 2.1
16150 16.20 0.38 16.96 2.2 0.10 2.5
16200 15.50 0.50 16.50 2.5 0.10 3.3
16250 15.50 0.63 16.76 2.8 0.10 3.6
1.2
Maximum flushing
pressure ( bar)
KDModel Inside diameter
(mm)
Maximum working
pressure (bar)
Outside diameter
(mm)
010101 Global Master technical data 160302 S.Typhoon 06/03/2016
Integral drippers Python™
Typhoon in pipes with 0.38 mm. wall thickness (Python 150) Nominal* flow rate Max. working Water passages dimensions Filtration area Constant Exponent Cross section Flow rate (l/h) vs Pressure (meter)
(l/h) pressure (bar) Width (mm) Depth (mm) Length (mm) (mm2) K x (mm
2) 1 3 5 7 9 10 12 14 16 18
0.80 0.55 0.63 40 26 0.284 0.45 0.35 0.28 0.47 0.59 0.68 0.76 0.80 0.87 0.93 0.99 1.04
1.05 0.63 0.51 23 26 0.373 0.45 0.32 0.37 0.61 0.77 0.90 1.00 1.05 1.14 1.22 1.30 1.37
1.65 0.79 0.60 23 34 0.546 0.48 0.47 0.55 0.93 1.18 1.39 1.57 1.65 1.80 1.94 2.07 2.19
2.70 0.95 0.85 23 35 0.894 0.48 0.81 0.89 1.51 1.94 2.28 2.57 2.70 2.95 3.17 3.38 3.58
*Flow rate at 1.0 bar pressure
Typhoon in pipes with 0.34 mm. wall thickness (Python 135) Nominal* flow rate Max. working Water passages dimensions Filtration area Constant Exponent Cross section Flow rate (l/h) vs Pressure (meter)
(l/h) pressure (bar) Width (mm) Depth (mm) Length (mm) (mm2) K x (mm
2) 1 3 5 7 9 10 12 14 16 18
0.80 0.55 0.63 40 26 0.284 0.45 0.35 0.28 0.47 0.59 0.68 0.76 0.80 0.87 0.93 0.99 1.04
1.05 0.63 0.51 23 26 0.373 0.45 0.32 0.37 0.61 0.77 0.90 1.00 1.05 1.14 1.22 1.30 1.37
1.60 0.79 0.60 23 34 0.529 0.48 0.47 0.53 0.90 1.15 1.35 1.52 1.60 1.74 1.88 2.00 2.12
2.70 0.95 0.85 23 35 0.894 0.48 0.81 0.89 1.51 1.94 2.28 2.57 2.70 2.95 3.17 3.38 3.58
*Flow rate at 1.0 bar pressure
Typhoon in pipes with 0.25 mm. wall thickness (Python 100) Nominal* flow rate Max. working Water passages dimensions Filtration area Constant Exponent Cross section Flow rate (l/h) vs Pressure (meter)
(l/h) pressure (bar) Width (mm) Depth (mm) Length (mm) (mm2) K x (mm
2) 1 2 3 4 5 6 7 8 9 10
0.80 0.55 0.63 40 26 0.284 0.45 0.35 0.28 0.39 0.47 0.53 0.59 0.64 0.68 0.72 0.76 0.80
1.10 0.63 0.51 23 26 0.390 0.45 0.32 0.39 0.53 0.64 0.73 0.80 0.87 0.94 0.99 1.05 1.10
1.60 0.79 0.60 23 34 0.529 0.48 0.47 0.53 0.74 0.90 1.03 1.15 1.25 1.35 1.44 1.52 1.60
2.70 0.95 0.85 23 35 0.894 0.48 0.81 0.89 1.25 1.51 1.74 1.94 2.11 2.28 2.43 2.57 2.70
*Flow rate at 1.0 bar pressure
Typhoon in pipes with 0.20 mm. wall thickness (Python 80) Nominal* flow rate Max. working Water passages dimensions Filtration area Constant Exponent Cross section Flow rate (l/h) vs Pressure (meter)
(l/h) pressure (bar) Width (mm) Depth (mm) Length (mm) (mm2) K x (mm
2) 1 2 3 4 5 6 7 8
0.80 0.55 0.63 40 26 0.284 0.45 0.35 0.28 0.39 0.47 0.53 0.59 0.64 0.68 0.72
1.10 0.63 0.51 23 26 0.390 0.45 0.32 0.39 0.53 0.64 0.73 0.80 0.87 0.94 0.99
1.65 0.79 0.60 23 34 0.546 0.48 0.47 0.55 0.76 0.93 1.06 1.18 1.29 1.39 1.48
2.70 0.95 0.85 23 35 0.894 0.48 0.81 0.89 1.25 1.51 1.74 1.94 2.11 2.28 2.43
*Flow rate at 1.0 bar pressure
Dripperline technical data - PythonWall thickness
(mm)
22080 22.20 0.20 22.60 0.8 0.03 0.9
22100 22.20 0.25 22.70 1.0 0.03 1.2
22135 22.20 0.34 22.88 1.5 0.03 1.7
22150 22.20 0.38 22.96 1.8 0.03 2.1
22250 22.20 0.63 23.46 2.5 0.03 2.9
1.8
1.5
1.0
0.8
Maximum flushing
pressure ( bar)
KDModel Inside diameter
(mm)
Maximum working
pressure (bar)
Outside diameter
(mm)
010101 Global Master technical data 160302 Python 06/03/2016
Integral drippers Streamline™
Streamline in pipes with 0.31 mm. wall thickness (Streamline 125) Nominal* flow rate Max. working Water passages dimensions Filtration area Constant Exponent Cross section Flow rate (l/h) vs Pressure (meter)
(l/h) pressure (bar) Width (mm) Depth (mm) Length (mm) (mm2) K x (mm
2) 3 4 5 6 7 8 10 12 14 16 18
0.72 0.59 0.33 25 12 0.238 0.48 0.19 0.40 0.46 0.52 0.56 0.61 0.65 0.72 0.78 0.84 0.90 0.95
1.05 0.51 0.44 13 14 0.373 0.45 0.22 0.61 0.70 0.77 0.84 0.90 0.95 1.05 1.14 1.22 1.30 1.37
1.60 0.65 0.55 13 15 0.568 0.45 0.36 0.93 1.06 1.17 1.27 1.36 1.45 1.60 1.74 1.86 1.98 2.09
2.10 0.72 0.65 13 15 0.740 0.45 0.47 1.21 1.38 1.53 1.66 1.78 1.89 2.09 2.26 2.43 2.58 2.72
*Flow rate at 1.0 bar pressure
Streamline in pipes with 0.25 mm. wall thickness (Streamline 100) Nominal* flow rate Max. working Water passages dimensions Filtration area Constant Exponent Cross section Flow rate (l/h) vs Pressure (meter)
(l/h) pressure (bar) Width (mm) Depth (mm) Length (mm) (mm2) K x (mm
2) 3 4 5 6 7 8 10 12 14 16 18
0.72 1.2/1.0/0.8 0.59 0.33 25 12 0.238 0.48 0.19 0.40 0.46 0.52 0.56 0.61 0.65 0.72 0.78 0.84 0.90 0.95
1.05 1.2/1.0/0.8 0.51 0.44 13 14 0.373 0.45 0.22 0.61 0.70 0.77 0.84 0.90 0.95 1.05 1.14 1.22 1.30 1.37
1.60 1.2/1.0/0.8 0.65 0.55 13 15 0.568 0.45 0.36 0.93 1.06 1.17 1.27 1.36 1.45 1.60 1.74 1.86 1.98 2.09
2.10 1.2/1.0/0.8 0.72 0.65 13 15 0.740 0.45 0.47 1.21 1.38 1.53 1.66 1.78 1.89 2.09 2.26 2.43 2.58 2.72
*Flow rate at 1.0 bar pressure **According to dripperlines inside diameter
Streamline in pipes with 0.20 mm. wall thickness (Streamline 80) Nominal* flow rate Max. working Water passages dimensions Filtration area Constant Exponent Cross section Flow rate (l/h) vs Pressure (meter)
(l/h) pressure (bar) Width (mm) Depth (mm) Length (mm) (mm2) K x (mm
2) 3 4 5 6 7 8 10 11 13 15 17
0.72 1.7/1.0/0.8/0.6 0.59 0.33 25 12 0.238 0.48 0.19 0.40 0.46 0.52 0.56 0.61 0.65 0.72 0.75 0.82 0.87 0.93
1.05 1.7/1.0/0.8/0.6 0.51 0.44 13 14 0.373 0.45 0.22 0.61 0.70 0.77 0.84 0.90 0.95 1.05 1.10 1.18 1.26 1.33
1.60 1.7/1.0/0.8/0.6 0.65 0.55 13 15 0.568 0.45 0.36 0.93 1.06 1.17 1.27 1.36 1.45 1.60 1.67 1.80 1.92 2.03
2.20 1.7/1.0/0.8/0.6 0.72 0.65 13 15 0.780 0.45 0.47 1.28 1.46 1.61 1.75 1.87 1.99 2.20 2.29 2.47 2.64 2.79
*Flow rate at 1.0 bar pressure **According to dripperlines inside diameter
Streamline in pipes with 0.15 mm. wall thickness (Streamline 60) Nominal* flow rate Max. working Water passages dimensions Filtration area Constant Exponent Cross section Flow rate (l/h) vs Pressure (meter)
(l/h) pressure (bar) Width (mm) Depth (mm) Length (mm) (mm2) K x (mm
2) 3 4 5 6 7 8 9 10 11 12 14
0.80 1.4/0.8 0.59 0.33 25 12 0.265 0.48 0.19 0.45 0.52 0.57 0.63 0.67 0.72 0.76 0.80 0.84 0.87 0.94
1.10 1.4/0.8 0.51 0.44 13 14 0.392 0.45 0.22 0.64 0.73 0.81 0.88 0.94 1.00 1.05 1.10 1.15 1.20 1.29
1.60 1.4/0.8 0.65 0.55 13 15 0.568 0.45 0.36 0.93 1.06 1.17 1.27 1.36 1.45 1.53 1.60 1.67 1.74 1.86
2.20 1.4/0.8 0.72 0.65 13 15 0.780 0.45 0.47 1.28 1.46 1.61 1.75 1.87 1.99 2.10 2.20 2.29 2.39 2.56
*Flow rate at 1.0 bar pressure **According to dripperlines inside diameter
Streamline in pipes with 0.10 mm. wall thickness (Streamline 50) Nominal* flow rate Max. working Water passages dimensions Filtration area Constant Exponent Cross section Flow rate (l/h) vs Pressure (meter)
(l/h) pressure (bar) Width (mm) Depth (mm) Length (mm) (mm2) K x (mm
2) 3 4 5 6 7 8
0.80 0.59 0.33 25 12 0.265 0.48 0.19 0.45 0.52 0.57 0.63 0.67 0.72
1.10 0.51 0.44 13 14 0.392 0.45 0.22 0.64 0.73 0.81 0.88 0.94 1.00
1.60 0.65 0.55 13 15 0.568 0.45 0.36 0.93 1.06 1.17 1.27 1.36 1.45
2.20 0.72 0.65 13 15 0.780 0.45 0.47 1.28 1.46 1.61 1.75 1.87 1.99
*Flow rate at 1.0 bar pressure
Dripperline technical data - StreamlineWall thickness Outside diameter
(mm) (mm)
12060 11.80 0.15 12.10 1.4 0.15 1.6
12080 11.80 0.20 12.20 1.7 0.15 2.0
16050 16.20 0.12 16.44 0.7 0.10 0.8
16060 16.20 0.15 16.50 0.8 0.10 0.9
16080 16.20 0.20 16.60 1.0 0.10 1.2
16100 16.20 0.25 16.70 1.2 0.10 1.4
16125 16.20 0.31 16.82 1.8 0.10 2.1
22080 22.20 0.20 22.60 0.8 0.01 0.9
22100 22.20 0.25 22.70 1.0 0.01 1.2
22125 22.20 0.31 22.82 1.2 0.01 1.4
25080 25.00 0.20 25.40 0.6 0.01 0.7
25100 25.00 0.25 25.50 0.8 0.01 0.9
1.8
Maximum flushing
pressure ( bar)
KDModel Inside diameter
(mm)
Maximum working
pressure (bar)
0.7
010101 Global Master technical data 160302 Streamline 06/03/2016
Integral drippers Streamline™ Plus
Streamline Plus in pipes with 200 micron wall thicknessNominal* flow rate Max. working Water passages dimensions Filtration area Constant Exponent Cross section Flow rate (l/h) vs Pressure (meter)
(l/h) pressure (bar) Width (mm) Depth (mm) Length (mm) (mm2) K x (mm
2) 3 4 5 6 7 8 10 11 12
0.72 1.2/1.0 0.59 0.33 25 12 0.238 0.48 0.19 0.40 0.46 0.52 0.56 0.61 0.65 0.72 0.75 0.78
1.05 1.2/1.0 0.51 0.44 13 14 0.373 0.45 0.22 0.61 0.70 0.77 0.84 0.90 0.95 1.05 1.10 1.14
1.60 1.2/1.0 0.65 0.55 13 15 0.568 0.45 0.36 0.93 1.06 1.17 1.27 1.36 1.45 1.60 1.67 1.74
2.20 1.2/1.0 0.72 0.65 13 15 0.780 0.45 0.47 1.28 1.46 1.61 1.75 1.87 1.99 2.20 2.29 2.39
*Flow rate at 1.0 bar pressure **According to dripperlines inside diameter (16/22)
Streamline Plus in pipes with 150 micron wall thicknessNominal* flow rate Max. working Water passages dimensions Filtration area Constant Exponent Cross section Flow rate (l/h) vs Pressure (meter)
(l/h) pressure (bar) Width (mm) Depth (mm) Length (mm) (mm2) K x (mm
2) 3 4 5 6 7 8 9 10
0.80 0.59 0.33 25 12 0.265 0.48 0.19 0.45 0.52 0.57 0.63 0.67 0.72 0.76 0.80
1.10 0.51 0.44 13 14 0.392 0.45 0.22 0.64 0.73 0.81 0.88 0.94 1.00 1.05 1.10
1.60 0.65 0.55 13 15 0.568 0.45 0.36 0.93 1.06 1.17 1.27 1.36 1.45 1.53 1.60
2.20 0.72 0.65 13 15 0.780 0.45 0.47 1.28 1.46 1.61 1.75 1.87 1.99 2.10 2.20
*Flow rate at 1.0 bar pressure
Streamline Plus in pipes with 135 micron wall thicknessNominal* flow rate Max. working Water passages dimensions Filtration area Constant Exponent Cross section Flow rate (l/h) vs Pressure (meter)
(l/h) pressure (bar) Width (mm) Depth (mm) Length (mm) (mm2) K x (mm
2) 3 4 5 6 7 8 9
0.80 0.59 0.33 25 12 0.265 0.48 0.19 0.45 0.52 0.57 0.63 0.67 0.72 0.76
1.10 0.51 0.44 13 14 0.392 0.45 0.22 0.64 0.73 0.81 0.88 0.94 1.00 1.05
1.60 0.65 0.55 13 15 0.568 0.45 0.36 0.93 1.06 1.17 1.27 1.36 1.45 1.53
2.20 0.72 0.65 13 15 0.780 0.45 0.47 1.28 1.46 1.61 1.75 1.87 1.99 2.10
*Flow rate at 1.0 bar pressure
Dripperline technical data - Streamline PlusWall
thickness
Outside diameter
(mm) (mm)
13516 16.20 0.135 16.47 0.9 0.10 1.0
15016 16.20 0.150 16.50 1.0 0.10 1.2
20016 16.20 0.200 16.60 1.2 0.10 1.4
20022 22.20 0.200 22.60 1.0 0.01 1.2
Maximum
flushing
pressure
0.9
1.0
Model Inside
diameter (mm)
Maximum
working
pressure
KD
010101 Global Master technical data 160302 Streamline Plus 06/03/2016
Integral drippers Microdrip
Microdrip in pipes with 0.80 mm. wall thickness (Microdrip 8) Nominal* flow rate Max. working Water passages dimensions Filtration area Constant Exponent Cross section Flow rate (l/h) vs Pressure (meter)
(l/h) pressure (bar) Width (mm) Depth (mm) Length (mm) (mm2) K x (mm
2) 1 2 4 6 8 10 12 14 16 18 20
2.00 4.00 0.63 0.73 22 22 0.647 0.49 0.460 0.65 0.91 1.28 1.56 1.79 2.00 2.19 2.36 2.52 2.67 2.81
*Flow rate at 1.0 bar pressure
Dripperline technical data - Microdrip 8Wall thickness Outside diameter
(mm) (mm)
Microdrip 8 6.30 0.80 7.90 4.00 2 5.2
Maximum flushing
pressure ( bar)
KDModel Inside diameter
(mm)
Maximum working
pressure (bar)
010101 Global Master technical data 160302 Microdrip 06/03/2016
On line drippers
PC Nominal* flow rate Working pressure Water passages dimensions Filtration area Constant Exponent Cross section
(l/h) range (bar) Width (mm) Depth (mm) Length (mm) (mm2) K x (mm
2)
2.0 1.17 1.07 61 2.0 2.0 0 1.25
4.0 1.32 1.44 60 2.0 4.0 0 1.90
8.5 1.60 1.60 17 2.0 8.5 0 2.56
* within the working pressure range
PC - LCNLNominal* flow rate Working pressure Water passages dimensions Filtration area Constant Exponent Shut off Cross section
(l/h) range (bar) Width (mm) Depth (mm) Length (mm) (mm2) K x pressure (bar) (mm
2)
2.0 1.17 1.07 61 2.0 2.0 0 0.15 1.25
4.0 1.32 1.44 60 2.0 4.0 0 0.15 1.90
8.5 1.60 1.60 17 2.0 8.5 0 0.15 2.56
* within the working pressure range
PC - HCNLNominal* flow rate Working pressure Water passages dimensions Filtration area Constant Exponent Shut off Cross section
(l/h) range (bar) Width (mm) Depth (mm) Length (mm) (mm2) K x pressure (bar) (mm
2)
3.0 1.17 1.07 61 2.0 3.0 0 0.3 1.25
6.0 1.32 1.44 60 2.0 6.0 0 0.3 1.90
12.0 1.60 1.60 17 2.0 12.0 0 0.3 2.56
* within the working pressure range
PCJ Nominal* flow rate Working pressure Water passages dimensions Filtration area Constant Exponent Cross section
(l/h) range (bar) Width (mm) Depth (mm) Length (mm) (mm2) K x (mm
2)
0.5 0.54 0.60 35 1.8 0.5 0 0.32
1.2 0.67 0.77 35 2.0 1.2 0 0.52
2.0 0.98 0.79 35 2.0 2.0 0 0.77
3.0 1.03 1.07 35 2.0 3.0 0 1.10
4.0 1.32 0.92 35 2.0 4.0 0 1.21
8.0 1.60 1.08 35 2.0 8.0 0 1.73
12.0 1.60 1.08 17 2.0 12.0 0 1.73
15.0 1.60 1.08 17 2.0 15.0 0 1.73
* within the working pressure range
PCJ - LCNLNominal* flow rate Working pressure Water passages dimensions Filtration area Constant Exponent Shut off Cross section
(l/h) range (bar) Width (mm) Depth (mm) Length (mm) (mm2) K x pressure (bar) (mm
2)
0.5 0.54 0.60 35 1.8 0.5 0 0.12 0.32
1.2 0.67 0.77 35 2.0 1.2 0 0.12 0.52
2.0 0.98 0.79 35 2.0 2.0 0 0.12 0.77
3.0 1.03 1.07 35 2.0 3.0 0 0.12 1.10
4.0 1.32 0.92 35 2.0 4.0 0 0.12 1.21
8.0 1.60 1.08 35 2.0 8.0 0 0.12 1.73
12.0 1.60 1.08 17 2.0 12.0 0 0.12 1.73
* within the working pressure range
PCJ - HCNLNominal* flow rate Working pressure Water passages dimensions Filtration area Constant Exponent Shut off Cross section
(l/h) range (bar) Width (mm) Depth (mm) Length (mm) (mm2) K x pressure (bar) (mm
2)
0.5 0.54 0.60 35 1.8 0.5 0 0.18 0.32
1.2 0.67 0.77 35 2.0 1.2 0 0.18 0.52
2.0 0.98 0.79 35 2.0 2.0 0 0.18 0.77
3.0 1.03 1.07 35 2.0 3.0 0 0.18 1.10
4.0 1.32 0.92 35 2.0 4.0 0 0.18 1.21
* within the working pressure range
Button & Pot Nominal* flow rate Max. working Water passages dimensions Constant Exponent Cross section Flow rate (l/h) vs Pressure (meter)
(l/h) pressure (bar) Width (mm) Depth (mm) Length (mm) K x (mm2) 2 4 6 8 10 12 14 16 18 20
2.00 0.98 0.89 50 0.662 0.48 0.87 0.92 1.29 1.56 1.80 2.00 2.18 2.35 2.51 2.65 2.79
3.00** 1.05 0.95 50 0.993 0.48 1.00 1.38 1.93 2.35 2.69 3.00 3.27 3.52 3.76 3.98 4.18
4.00 1.27 1.20 50 1.325 0.48 1.52 1.85 2.58 3.13 3.60 4.00 4.37 4.70 5.01 5.31 5.58
8.00 1.65 1.40 50 2.649 0.48 2.31 3.69 5.15 6.26 7.19 8.00 8.73 9.40 10.02 10.61 11.16
*Flow rate at 1.0 bar pressure ** only available in the Button dripper model
CapiNet™Nominal* flow rate Max. working Water passages dimensions Constant Exponent Cross section Flow rate (l/h) vs Pressure (meter)
(l/h) pressure (bar) Width (mm) Depth (mm) Length (mm) K x (mm2) 2 4 6 8 10 12 14 16 18 20
1.95 0.76 0.70 21 0.630 0.49 0.532 0.88 1.24 1.52 1.75 1.95 2.13 2.30 2.45 2.60 2.73
2.75 0.76 0.70 11 0.890 0.49 0.532 1.25 1.76 2.14 2.47 2.75 3.01 3.24 3.46 3.67 3.86
*Flow rate at 1.0 bar pressure
1.5 - 4.0
2.0
2.0
0.5 - 4.0
1.4 - 4.0
1.0 - 4.0
0.5 - 4.0
0.7 - 4.0
010101 Global Master technical data 160302 On line drippers 06/03/2016
Other emitters
Arrow dripper Nominal* flow rate Max. working Water passages dimensions Filtration area Constant Exponent Cross section Flow rate (l/h) vs Pressure (meter)
(l/h) pressure (bar) Width (mm) Depth (mm) Length (mm) (mm2) K x (mm
2) 2 4 6 8 10 12 14 16 18 20
1.6 0.83 0.60 20 9.4 0.529 0.48 0.50 0.74 1.03 1.25 1.44 1.60 1.74 1.88 2.00 2.12 2.23
2.3 0.83 0.86 20 12.6 0.761 0.48 0.71 1.06 1.48 1.80 2.06 2.30 2.51 2.70 2.88 3.05 3.21
*Flow rate at 1.0 bar pressure
PCJ - HF bubblerNominal* flow rate Working pressure Water passages dimensions Filtration area Constant Exponent
(l/h) range ( bar) (mm2) K x
20.0 1.4 x 1.1 2.0 20.0 0
25.0 1.4 x 1.1 + 0.4 x 2.1 2.0 25.0 0
30.0 1.4 x 1.1 + 0.7 x 2.1 2.0 30.0 0
35.0 1.4 x 1.1 + 1.0 x 2.1 2.0 35.0 0
40.0 1.3 -4.0 1.4 x 1.1 + 1.0 x 2.6 2.0 40.0 0
* within the working pressure range
PCJ - HF - CNL bubblerNominal* flow rate Working pressure Water passages dimensions Filtration area Constant Exponent Shut off
(l/h) range ( bar) (mm2) K x pressure (bar)
20.0 1.4 x 1.1 2.0 20.0 0 0.12
25.0 1.4 x 1.1 + 0.4 x 2.1 2.0 25.0 0 0.12
30.0 1.4 x 1.1 + 0.7 x 2.1 2.0 30.0 0 0.12
35.0 1.4 x 1.1 + 1.0 x 2.1 2.0 35.0 0 0.12
40.0 1.3 -4.0 1.4 x 1.1 + 1.0 x 2.6 2.0 40.0 0 0.12
* within the working pressure range
1.2
1.0 -4.0
1.0 -4.0
010101 Global Master technical data 160302 Other emitters 06/03/2016