Drilltech Ctg

8/3/2019 Drilltech Ctg

1/13

oFFshore production

oFFshore drilling

land drilling

pipelining

drilltechdrilltech

B y W i r e r o p e i n d u s t r i e s


2/13

speciFicationsdrilltechdrilltechB y W i r e r o p e i n d u s t r i e s

Weights and Breaking loads

d r ax. W n Bk () c b/f (k/) l- (kn)

1/2 (13) 6 x 26 RRL EIPS IWRC 0.46 (0.68) 13.3 (118)9/16 (14) 6 x 26 RRL EIPS IWRC 0.59 (0.88) 16.8 (149)

5/8 (16) 6 x 26 RRL EIPS IWRC 0.72 (1.07) 20.6 (183)

3/4 (19) 6 x 26 RRL EIPS IWRC 1.04 (1.55) 29.4 (262)

7/8 (22) 6 x 26 RRL EIPS IWRC 1.42 (2.11) 39.8 (354)

1 (25) 6 x 26 RRL EIPS IWRC 1.85 (2.75) 51.7 (460)

1-1/8 (29) 6 x 26 RRL EIPS IWRC 2.34 (3.48) 65.0 (578)

1-1/4 (32) 6 x 26 RRL EIPS IWRC 2.89 (4.30) 79.9 (711)

1-3/8 (35) 6 x 26 RRL EIPS IWRC 3.50 (5.21) 96.0 (854)

1-1/2 (38) 6 x 26 RRL EIPS IWRC 4.16 (6.19) 114.0 (1 014)

1-5/8 (41) 6 x 26 RRL EIPS IWRC 4.88 (7.26) 132.0 (1 174)

1-3/4 (44) 6 x 26 RRL EIPS IWRC 5.67 (8.44) 153.0 (1 361)

1-7/8 (48) 6 x 26 RRL EIPS IWRC 6.50 (9.67) 174.0 (1 548)

2 (51) 6 x 26 RRL EIPS IWRC 7.39 (11.00) 198.0 (1 762)

Breaking load values are subject to a minus tolerance of 2.5%.

perFormance series 620



1/2 (13) 6 x 36 RRL EIPS IWRC 0.46 (0.68) 13.3 (118)

9/16 (14) 6 x 36 RRL EIPS IWRC 0.59 (0.88) 16.8 (149)

5/8 (16) 6 x 36 RRL EIPS IWRC 0.72 (1.07) 20.6 (183)

3/4 (19) 6 x 36 RRL EIPS IWRC 1.04 (1.55) 29.4 (262)

7/8 (22) 6 x 36 RRL EIPS IWRC 1.42 (2.11) 39.8 (354)

1 (25) 6 x 36 RRL EIPS IWRC 1.85 (2.75) 51.7 (460)

1-1/8 (29) 6 x 36 RRL EIPS IWRC 2.34 (3.48) 65.0 (578)

1-1/4 (32) 6 x 36 RRL EIPS IWRC 2.89 (4.30) 79.9 (711)

1-3/8 (35) 6 x 36 RRL EIPS IWRC 3.50 (5.21) 96.0 (854)

1-1/2 (38) 6 x 36 RRL EIPS IWRC 4.16 (6.19) 114.0 (1 014)

1-5/8 (41) 6 x 36 RRL EIPS IWRC 4.88 (7.26) 132.0 (1 174)

1-3/4 (44) 6 x 36 RRL EIPS IWRC 5.67 (8.44) 153.0 (1 361)

1-7/8 (48) 6 x 36 RRL EIPS IWRC 6.50 (9.67) 174.0 (1 548)

2 (51) 6 x 36 RRL EIPS IWRC 7.39 (11.00) 198.0 (1 762)



Wire Rope Industries Ltd. 5501 Trans Canada Highway, Pointe Claire, Quebec Canada H9R 1B7 Tel: (1)-514-697-9711 www.wirerope.com

SERVICE REPRESENTATIVE


3/13



1-1/2 (38) 8 x 37 RLL Dy-Pac 8 Cushion Core/Rope 4.52 (6.73) 113.1 (1 006)1-5/8 (41) 8 x 37 RLL Dy-Pac 8 Cushion Core/Rope 5.34 (7.95) 131.6 (1 171)

1-3/4 (44) 8 x 37 RLL Dy-Pac 8 Cushion Core/Rope 6.16 (9.17) 154.0 (1 370)


2 (51) 8 x 37 RLL Dy-Pac 8 Cushion Core/Rope 7.86 (11.70) 197.0 (1 753)







3 (76) 8 x 50 RLL Dy-Pac 8 Cushion Core/Rope 16.43 (24.45) 408.5 (3 634)

Breaking loads are based on a 1% design oversize tolerance for Cushion Core and a 4% after plastic design oversize tolerance forCushion Rope. Breaking load values are subject to a minus tolerance of 2.5%.



1/2 (13) 6 x 25 RRL Dy-Pac 0.51 (0.76) 15.0 (133)

9/16 (14) 6 x 25 RRL Dy-Pac 0.64 (0.95) 19.0 (169)

5/8 (16) 6 x 25 RRL Dy-Pac 0.79 (1.18) 23.3 (207)

3/4 (19) 6 x 31 RRL Dy-Pac 1.14 (1.70) 33.2 (296)

7/8 (22) 6 x 31 RRL Dy-Pac 1.54 (2.29) 44.9 (400)

1 (25) 6 x 31 RRL Dy-Pac 2.01 (2.99) 58.4 (520)

1-1/8 (29) 6 x 31 RRL Dy-Pac 2.54 (3.80) 73.3 (653)

1-1/4 (32) 6 x 31 RRL Dy-Pac 3.14 (4.67) 90.2 (803)


cushion-pac 8

dy-pac 6





4/13




7/8 (22) 6 x 26 RRL EIPS IWRC Cushion Rope 1.42 (2.11) 39.8 (354)1 (25) 6 x 26 RRL EIPS IWRC Cushion Rope 1.85 (2.75) 51.7 (460)

1-1/8 (29) 6 x 19 (9.9.1) RRL EIPS IWRC Cushion Rope 2.43 (3.62) 68.5 (609)



1-1/2 (38) 6 x 19 (9.9.1) RRL EIPS IWRC Cushion Rope 4.19 (6.23) 116.6 (1 037)




cushion 6



7/8 (22) 6 x 26 RRL EIPS IWRC 1.42 (2.11) 39.8 (354)

1 (25) 6 x 19 (9.9.1) RRL EIPS IWRC 1.85 (2.75) 51.7 (460)

1-1/8 (29) 6 x 19 (9.9.1) RRL EIPS IWRC 2.34 (3.48) 65.0 (578)

1-1/4 (32) 6 x 19 (9.9.1) RRL EIPS IWRC 2.89 (4.30) 79.9 (711)

1-3/8 (35) 6 x 19 (9.9.1) RRL EIPS IWRC 3.50 (5.21) 96.0 (854)

1-1/2 (38) 6 x 19 (9.9.1) RRL EIPS IWRC 4.16 (6.19) 114.0 (1 014)

1-5/8 (41) 6 x 19 (9.9.1) RRL EIPS IWRC 4.88 (7.26) 132.0 (1 174)

1-3/4 (44) 6 x 19 (9.9.1) RRL EIPS IWRC 5.67 (8.44) 153.0 (1 361)






5/13


d r ax. W n Bk l () c b/f (k/) (kn)

3/8 (10) 18x7 RRL Dy-Pac 0.28 (0.41) 8.1 (72)

7/16 (11) 18x7 RRL Dy-Pac 0.38 (0.56) 11.1 (99)

1/2 (13) 18x7 RRL Dy-Pac 0.50 (0.74) 14.6 (130)

9/16 (14) 18x7 RRL Dy-Pac 0.63 (0.94) 18.6 (165)

5/8 (16) 18x19 RRL Dy-Pac 0.79 (1.18) 23.1 (205)

3/4 (19) 18x19 RRL Dy-Pac 1.13 (1.68) 32.8 (292)

7/8 (22) 18x19 RRL Dy-Pac 1.56 (2.32) 45.4 (404)

1 (25) 18x19 RRL Dy-Pac 2.02 (3.00) 59.0 (525)

1-1/8 (29) 18x19 RRL Dy-Pac 2.56 (3.82) 74.7 (665)

1-1/4 (32) 18x19 RRL Dy-Pac 3.18 (4.73) 92.9 (827)

dy-pac 18h pf rWeights and Breaking Loads

Note: Rotation resistant ropes perform best when used with a working load limit of 10:1.



3/8 (10) 18x7 RRL EIPS SC 0.25 (0.37) 5.7 (51)

7/16 (11) 18x7 RRL EIPS SC 0.35 (0.52) 7.8 (69)

1/2 (13) 18x7 RRL EIPS SC 0.45 (0.66) 10.8 (96)

9/16 (14) 18x7 RRL EIPS SC 0.58 (0.86) 13.6 (121)

5/8 (16) 18x7 RRL EIPS SC 0.71 (1.06) 16.8 (150)

3/4 (19) 18x7 RRL EIPS SC 1.02 (1.52) 24.0 (214)

7/8 (22) 18x7 RRL EIPS SC 1.39 (2.07) 32.5 (289)

1 (25) 18x7 RRL EIPS SC 1.82 (2.71) 42.2 (376)

1-1/8 (29) 18x7 RRL EIPS SC 2.30 (3.42) 53.1 (473)

1-1/4 (32) 18x7 RRL EIPS SC 2.84 (4.23) 65.1 (580)

1-3/8 (35) 18x7 RRL EIPS SC 3.43 (5.11) 78.4 (698)

1-1/2 (38) 18x7 RRL EIPS SC 4.08 (6.07) 92.8 (826)

perFormance series 181018x7 cf Q rWeights and Breaking Loads

Note: Rotation resistant ropes perform best when used with a working load limit of 10:1.





6/13


3/4 (19) 6x36 RRL IPS IWRC 1.04 (1.55) 25.6 (228)

7/8 (22) 6x36 RRL IPS IWRC 1.42 (2.11) 35.0 (311)

1 (25) 6x36 RRL IPS IWRC 1.87 (2.78) 46.1 (410)

1-1/16 (27) 6x36 RRL IPS IWRC 2.09 (3.11) 51.4 (457)

1-1/8 (29) 6x36 RRL IPS IWRC 2.36 (3.51) 58.2 (518)

1-1/4 (32) 6x36 RRL IPS IWRC 2.93 (4.36) 71.9 (640)

Blue strand

6x37 cf Q W lWeights and Breaking Loads






7/13

cushion

6drilltechdrilltechB y W i r e r o p e i n d u s t r i e s

The oil and gas industry is known for having some of the mostdifficult equipment operating conditions found anywhere in the world. WireRope Industries offers a full line of specialized Drilltech products and services tomeet these challenges. Tested and designed for superior performance and value,our Drilltech line includes top

performers such as Cushion 6 drilling lines.

For more information on Cushion 6 or any other high performance Drilltechproducts, please contact your local Wire Rope representative.

cushion 6 ropes For drilling applications

cushion 6 increases rope perFormance and reduceseQuipment maintenance

A well-proven 6x19/26 IWRC rope, specially designed for plastic enhancement,provides an excellent performance/strengthcombination.

WRIs exclusive plastic enhancement process maximizes impregnation whichcushions and separates the rope strands and steel core. This creates a morebalanced rope where stress is evenly distributed and inter-strand nicking isvirtually eliminated, resulting in improved performance, increased strength, andbetter resistance to shock loading.

Full plastic enhancement significantly reduces stretch and minimizes drumcrushing which improves performance and reduces downtime.

Full rope cushioning minimizes moisture and contaminant penetration, reducinginternal abrasion and corrosion.

A smooth outer rope profile maximizes the contact area betweenthe rope and the equipment, enhancing rope wear resistance and reducingsheave and drum wear.

Specially formulated lubrication provides protection for individual wires,reducing friction and maintaining freedom of movement between the wires andthe plastic.

External markings on the rope make it easy to identify Cushion 6high performance ropes.

Full technical support allows WRI customers to make the correct Cushion Ropeselection, obtain the relevant installation, inspection and maintenanceprocedures, and receive the necessary training.

Computerized slip and cut programs provide accurate, speedycalculations which optimize rope performance.

cushion 6 reduces operating costs and increasesproFits

Reduced overall operating costs as a result of increased ton/mile(mega joule) performance and trouble-free operation.

Less downtime as a result of fewer slip and cuts.




8/13

cushion-pac


The oil and gas industry is known for having some of the mostdifficult equipment operating conditions found anywhere in the world. Wire RopeIndustries offers a full line of specialized Drilltech products and services to meetthese challenges. Tested and designed for

superior performance and value, our Drilltech line includes market leaders such asCushion-Pac 8 riser tensioner lines.

For more information on Cushion-Pac 8 or any other high performance Drilltechproducts, please contact your local Wire Rope representative.

cushion-pac 8 ropes For riser tensionerapplications

cushion-pac 8 increases rope perFormanceand productiVity

cushion-pac 8 reduces operating costs and increasesproFits

A well-proven Dy-Pac 8 strand construction increases strength, improves ropefatigue life, and provides better resistance to crushing.

Thermal plastic enhancement significantly increases core protection and strandsupport, resists infiltration of abrasives and moisture, and reduces stretch.

Greater rope contact area increases rope life and reduces sheave wear.

Specially formulated lubrication increases rope performance and reduces theeffects of corrosion.

Full technical support allows WRI customers to make the correct Cushion-Pac

rope selection, obtain the relevant installation, inspection and maintenanceprocedures, and receive the necessary training.

Computerized slip and cut programs provide accurate, speedycalculations which optimize performance.

Reduced overall operating costs as a result of increased ton(mega joule) days.

Reduced downtime as a result of fewer rope change-outs and slipand cuts.

Lower maintenance costs as the result of reduced sheave and drum wear.

1-3/4(44mm)DIA,Rope,1/3B/L,D/d=24

CUSHION

CORE

Dy-pac8x37 C/C

PLASTIC

ENHANCED

Dy-pac8x37 C/R

WRI 6x41

Competitor6x41

UN FILLED

ROPE

Dy-pac8x37

WRI 6x41Competitor6x41

Rope Fatiguetestresults- CyclesinThousands

0 50 100 150 200 25

29

161,000

80,000

148,000

142,000

76,00072,000

CUSHION-PAC8 OUTPERFORMS




9/13

Blue strand

drilltechdrilltechB y W i r e r o p e i n d u s t r i e s

The oil and gas industry is known for having some of the most difficult equipmentoperating conditions found anywhere in the world. Wire Rope Industries offers afull line of specialized Drilltech products and services to meet these challenges.Tested and designed for

superior performance and value, our Drilltech line includes Blue Strand qualitywinch lines.

For more information on Blue Strand ropes or any other highperformance Drilltech products, please contact your local Wire Roperepresentative.

Blue strand ropes For oilField Winchapplications

Blue strand ropes proVide improVedperFormance

Blue strand ropes are cost eFFectiVe

A well-proven 6x36 rope design increases fatigue life and improves drumspooling.

Specialized constructional properties improve flexibility, handling,and spliceability.

Specially blended wire tensiles ensure the necessary strength to meet increasingequipment demands.

An Independent Wire Rope Core (IWRC) provides enhanced strand support,greater diameter consistency and reduced stretch, resultingin improved performance and operational security.

Specially formulated lubrication increases rope performance and reducescorrosion.

High quality manufacturing techniques, certified to ISO-9001-94 and API 9A&Q1standards, ensure consistent rope quality andperformance.

A blue colored strand and well-marked core tracers in all products make it easyto identify Blue Strand quality ropes.

Full technical support allows WRIs customers to make the correct ropeselection, obtain the relevant installation, inspection andmaintenance guidelines, and receive the necessary training.

Reduced overall operating costs as the result of improved ropeperformance.

Reduced equipment downtime resulting from trouble-free operation and technicalsupport.




10/13

perFormance seriesdrilltechdrilltech

B y W i r e r o p e i n d u s t r i e s

The oil and gas industry is known for having some of the most difficult equipmentoperating conditions found anywhere in the world. Thats why Wire RopeIndustries designs and redesigns our "Ropes that Outperform" to meet thesegrowing demands.

For more information on Performance Series ropes or any other highperformance Drilltech products, please contact your local Wire Rope Industriesrepresentative.

perFormance series ropes For oil and gasapplications

perFormance series 600 ropes proVideconsistent perFormance and improVedoperating eFFiciencies

perFormance series 510 sandlines increase ropeperFormance and reliaBility

A well-proven 6x26/36 rope design provides the best performance/strengthcombination to ensure good wear resistance and fatigue life.

EIPS tensile wire ensures the necessary strength to meet increasing equipmentdemands.

Specially formulated lubrication increases rope performance, reduces corrosion,and minimizes environmental impact due to fly-off.

High quality manufacturing techniques, certified to ISO-9001-94 and API 9A&Qlstandards, ensure consistent rope quality and performance.

Full technical support allows WRI's customers to make the correct rope selectionand to obtain the relevant installation, inspection and maintenance guidelines.

Tested and designed to outperform, we are proud to introduce our new costeffective sandline / swabline rope.

This new 5x7 construction increases strength, improves wear properties, enhancescorrosion resistance and reduces torque.

perFormance series 619 drilling lines improVeperFormance

A resilient 6x19 (9.9.1) construction with specialized wire provides the addedstrength, enhanced wear resistance, and improved fatigue resistance necessaryto operate on high cycle drill line applications.

Computerized slip and cut programs provide accurate, speedy calculationswhich optimize performance.

perFormance series ropes are cost eFFectiVe Reduced overall operating costs as the result of consistent

performance and rope construction.

Reduced equipment downtime results from trouble-free operation andtechnical support.

perFormance series ropes Wor

PERFORMANCE

SERIES 630

0

6x36 RRL IWRC

Average rope fatigue test results in cycles

3/4 (19 mm) diameter rope, 11 800 lb (1/3 B/L), D/d=18-1

10 000 20 000 30 000 40 000

PERFORMANCE

SERIES 620

6x26 RRL IWRC

COMPETITOR A

6x25 RRL IWRC

COMPETITOR B

6x25 RRL IWRC



neW


11/13

pro-sWaged


For more information on Pro-Swaged 5 or any other high performanceDrilltech products, please contact your local Wire Rope representative.

pro-sWaged 5 increases productiVity and oVeralleFFectiVeness

pro-sWaged 5 cuts costs and increases proFits

Reduced overall operating costs as a result of increased rope performance.

Reduced equipment downtime as a result of fewer rope change-outs andtrouble-free operation.

Lower equipment maintenance costs as a result of reduced sheave and drumwear.



neW

Wire Rope Industries is proud to present our new Pro-Swaged 5 sandline rope. Tested anddesigned to outperform, this new specialized rope will meet the ever changing needs of thewell service industry.

pro-sWaged 5 ropes For sandline / sWaBBing applications

A new 5x7 rope design combined with full rope compaction (swaging)significantly increases strength, allowing for rope downsizing, reduced weightand increased drum capacity.

The swaging process improves the ropes stripping capabilities, allowing forcleaner operations and improved drum spooling.

This high density rope provides exceptional rope performance, decreases thesusceptibility to torque, improves corrosion resistance, and stands up well toabuse.

A smooth outer rope profile reduces wear and increases sheave and drum life.

Full technical support allows WRI customers to make the correctPro-Swaged rope selection and obtain the relevant installation, inspection andmaintenance procedures.


12/13

dy-pac


For more information on Dy-Pac 6 or any other high performance Drilltechproducts, please contact your local Wire Rope representative.

dy-pac 6 increases rope perFormance and reduceseQuipment maintenance

dy-pac 6 reduces operating costs and increasesproFits

Reduced overall operating costs as a result of significantly enhanced ropeperformance "A 60% megajoule improvement".

Reduced equipment downtime as a result of fewer rope change-outs.

Lower maintenance costs as a result of reduced sheave and drum wear.



neW

Wire Rope Industries is pleased to introduce Dy-Pac 6 high-cycle rope for tubing lineapplications. We continue to design and redesign our Ropes that Outperform to meet all yourdrilling needs.

dy-pac 6 ropes For Well serVice/WorKoVer rig applications

A proven 6x31 IWRC construction and specially selected wire tensiles createropes that have the most suitable characteristics for Dy-Pac enhancement andrope performance.

The Dy-Pac strand compaction process increases the steel area of the individualstrands, producing a rope with greater strength and increased capacity.

A greater steel area in the rope results in higher crush resistanceand significantly enhanced drum spooling.

A smooth outer strand profile improves rope wear resistance and reduces

sheave and drum wear.

Greater contact area between each strand reduces inner-strand nicking,increases flexibility under load and enhances fatigue life.

Specially formulated lubrication increases rope performance, reduces corrosionand minimizes environmental impact due to fly-off.

Well-marked core tracers make it easy to identify Dy-Pac 6 high performanceropes.

Full technical support allows WRI customers to make the correctDy-Pac rope selection, obtain the relevant installation, inspectionand maintenance procedures, and receive the necessary training.


13/13



3/8 (10) 5x7 polyp. core swaged 0.27 (0.40) 7.8 (69.7)




pro-sWaged 5h pf sWeights and Breaking Loads



1/2 (13) 5x7 polyp. core 0.37 (0.55) 10.7 (95.3)

9/16 (14) 5x7 polyp. core 0.48 (0.71) 13.8 (122.8)

5/8 (16) 5x7 polyp. core 0.59 (0.88) 17.8 (158.5)

perFormance series 5105x7 cf Q sWeights and Breaking Loads



Drilltech Ctg

Documents

Transcript of Drilltech Ctg