Drilling Systems Automation Roadmap - Update · PDF fileDrilling Systems Automation Roadmap -...
Transcript of Drilling Systems Automation Roadmap - Update · PDF fileDrilling Systems Automation Roadmap -...
Drilling Systems Automation Roadmap - Update
A independently organized, volunteer based, cross industry initiative mapping the future of drilling
systems automation
DSA Roadmap Industry Initiative
John de Wardt CEng, Fellow IMechE DE WARDT AND COMPANY Program Manager: Drilling Systems Automation Roadmap Industry Initiative
Affiliated with
Program Manager: John de Wardt, DE WARDT AND CO Deputy Program Manager: Ed Tovar, InTechSys
• Mark Andersen (Shell) • Eric Cayeux (IRIS) • Amanda DiFiore (Qinetiq) • Blaine Dow (MI Swaco) • Clay Flannigan (SWRI) • Slim Hbaieb
(Schlumberger) • Calvin Inabinett
(Aerospace Rocketdyne) • Moray Laing (SAS / SPE
DSATS)
• Terry Loftis (Transocean / IADC ART),
• Robin Macmillan (NOV) • John Macpherson (Baker
Hughes / SPE DSATS) • Mark Miller (Gyrodata) • Bob Moran (Halliburton) • Randy Mutch (Ensign) • Lindsay Voss (AUVSI) • Mario Zamora (MI Swaco)
IADC ART Conference Galveston Sept 2014
Presenter: John de Wardt
Phase I - Volunteer Driven
Phase PII – In Development Manufacturing wells?
And / Or Complex wells?
Based on Sandia National Laboratories Program IADC ART Conference Galveston Sept 2014
Presenter: John de Wardt
IADC ART Conference Galveston Sept 2014 Presenter: John de Wardt
Needs for a Roadmap • Fragmented industry structure requires plan
for interoperability • Define supplier opportunities
• Consensus description of DSA, how it will develop and deliver value
• Attract investment
• Entry of non-oil and gas industry players • Alternative technologies
• Overcome fear of changes to personnel
IADC ART Conference Galveston Sept 2014 Presenter: John de Wardt
Eight Challenges have been defined Teams led by committee member – 50 participants overall
A. Systems Architecture B. Communications C. Sensors, Instrumentation &
Measurement D. Drilling Machines and Equipment E. Control Systems F. Simulation Systems and
Modelling G. Human Factors H. Certification and Industry
Standards
Systems Architecture
States = situational awareness: • Well State • Drilling and Completion State • Automation State • Others – Weather, …
Use Cases define each system / subsystem
IADC ART Conference Galveston Sept 2014 Presenter: John de Wardt
Communications
IADC ART Conference Galveston Sept 2014 Presenter: John de Wardt
Sensors, Instrumentation & Measurement
IADC ART Conference Galveston Sept 2014 Presenter: John de Wardt
Drilling Machines and Equipment
Drilling machines and equipment are not an impediment to drilling systems automation progress
A shale drilling DSA solution combined with manufacturing processes will enable development of advanced drilling machines
IADC ART Conference Galveston Sept 2014 Presenter: John de Wardt
Control Systems
IADC ART Conference Galveston Sept 2014 Presenter: John de Wardt
Simulation Systems and Modelling Exhaustive (but not complete) list: 1. Torque and Drag 2. Rate of Penetration 3. Seismic (1D – 4D) 4. Mechanical Earth Model 5. Shock and Vibration 6. Pore Pressure 7. Wellbore Survey 8. Anti-collision model 9. Casing load model 10. BHA prediction model 11. Drill bit cutting model 12. Well control simulation 13. Cement displacement model 14. Well Placement 15. Hydraulics models (fluid
properties, ECD prediction, hole cleaning)
16. Drilling Hazards IADC ART Conference Galveston Sept 2014
Presenter: John de Wardt
Human Factors
IADC ART Conference Galveston Sept 2014 Presenter: John de Wardt
IADC ART Conference Galveston Sept 2014 Presenter: John de Wardt
Certification and Industry Standards
• Technology may come first, followed by the standards, certification, and regulation
• International Society of Automation (ISA) standards that have applicability
• ISA-5 (instrument symbols) • ISA-18 (alarm systems) • ISA-20 (instruments) • ISA-84 (safety instrumented systems; overlap with IEC-61508 &
61511) • ISA-88 (batch control) • ISA-95 (enterprise – control systems integration) • ISA-99 (control systems security) • ISA-100 (wireless) • ISA-101 (human machine interface)
• Creating new standards with Energistics (DSATS)
Continuing the work As a Cross Industry Initiative
Delivery Phase I • Paper and Presentation
SPE / IADC Drilling Conference; London, England – March 2015
Planning Phase II • Next level of detail • Requires analysis and
validation • Stakeholders reviews &
adoption
• Industry Roadmaps require funding
• Value across the industry and connecting to other industries
IADC ART Conference Galveston Sept 2014 Presenter: John de Wardt
Thank you
Follow us at: http://www.iadc.org/dsaroadmap
http://connect.spe.org/DSARoadmap/Home/
IADC ART Conference Galveston Sept 2014 Presenter: John de Wardt