Dräger Technical Training - Draeger€¦ · 4301 N. Fairfax Drive, Suite 301, Arlington, VA...

Dräger Technical TrainingOptimizing Productivity and Safety 2019 / July - December / North America

ANESTHESIAVENTILATIONWARMING THERAPYMONITORING & HEALTHCARE IT

D-5

7022

-201

4

CONTENTS

Introduction 3

GeneralInformation 4-5

TravelandHotelInformation 6

Anesthesia 7

Ventilation 8

WarmingTherapy 9

Monitoring&HealthcareIT 10–13

CourseCodesandSchedules 14–15

Registration 16–17

AA

MI C

redentials Institute

• CEU PRE -A PPROVED

•

Draeger, Inc. is accredited as an Authorized Provider by the

Association for the Advancement of Medical Instrumentation (AAMI),

4301 N. Fairfax Drive, Suite 301, Arlington, VA 22203-1633; 1-703-525-4890.

NOTE: This manual covers technical courses designed for biomedical professionals and other technical staff.

02 |

Technology for Life

At Dräger, “Technology for Life” goes beyond providing quality equipment. It alsoincludes teaching you to use our technology in a way that will help you improve clinicaloutcomes, manage the cost of care, ensure staff satisfaction, and improve the patientexperience.

That’s why training is an integral part of the support we provide. We understand thatyour people are the vital link between our life-saving technology and your patients.

D-5

2654

-201

2

The Power of

Education

DRÄGER TRAINING MISSION

Our goal is to enhance your knowledge andproficiency in using, maintaining and servicingyour Dräger products.

Dräger is committed to providing education andtraining tools that are designed to make the mostof your clinical resources. We offer a modularapproach in three areas: basic device training,application expertise, and management skills.

By transferring our knowledge and expertise, wecan help your staff use our devices more effectivelyand confidently — which can ultimately help youimprove care processes.

| 03

General Information

LANGUAGE

All Dräger technical education courses conducted in NorthAmerica are done so in American English, as are the trainingmaterials.

SCHEDULE

Please observe the following requirements and restrictions:— Classes typically begin promptly at 8:30 a.m. (classrooms open at 8 a.m.) and end at 4:30 p.m. each class day. No students are allowed in the classroom prior to 8 a.m.— Due to the logistics of travel to the nearest airport (PHL), it is recommended that no departure flights be booked earlier than 7 p.m. on the last class day.

DRESS CODE

Dress code is business casual. No shorts or open toe shoesare permitted.

PREREQUISITES AND CONTENT

Courses are designed with the understanding that studentshave been exposed to the general function of the product(s)being discussed.

Dräger does not perform component repairs to printedcircuit board assemblies in the field and thus does notrecommend the student to do so. Component repairs aredone only at Dräger’s manufacturing plant by specificallytrained technicians, using appropriate and sophisticatedtesting procedures and equipment. All courses have beendesigned with this philosophy in mind.

TEACHING STAFF

All Dräger training personnel are full-time employees ofDraeger, Inc. They are not paid spokespeople for anythird-party organization. By attending this training, it isunderstood that the academic focus will be on the Drägerequipment that is currently (or soon to be) in possession ofor contractually managed by the student’s employer.

COPYRIGHT

Dräger Technical Training is proprietary and all content isthe property of Draeger, Inc. What you see and hear duringall Dräger technical courses is copyrighted and audio andvideo recordings are not permitted.

TUITION

Your tuition payment covers the cost of all course materials,instruction, lunch and refreshments. Prices are subjectto change without notice. All travel, expenses and hotel

accommodations, including meals outside of Dräger, arethe sole responsibility of each registered student. Tuitionpayment MUST be provided before or at the time ofregistration.

REGISTRATION AND CONFIRMATION

Class space is limited and students are enrolled ona first-come, first-served basis. A letter of confirmationwill be sent to the registrant via U.S. Mail, fax or email toconfirm registration. Read this letter carefully. If correctionsare needed, contact Dräger Customer Service at 800-437-2437, menu option 2, followed by option 1.

EQUAL OPPORTUNITY STATEMENT

Dräger is an equal opportunity employer and educator.Dräger does not discriminate against otherwise qualifiedlearners on the basis of race, color, creed, religion, sexualorientation, gender identity, ancestry, national origin,age, disability, veteran status, marital status, or any othercharacteristic protected by law.

COURSE MATERIALS

All technical service manuals and service-related materialsare in electronic format only. Each student will receive aone year license (from the date training was completed)to Basic ServiceConnect, which provides access to thetechnical documentation for which the student is trained.A signed license agreement is required to access BasicServiceConnect and is available for purchase after thefirst year. For minimum computer requirements and a briefdescription of the ServiceConnect software and additionalforms required to receive this software, please contactDräger Customer Service at 800-437-2437, menu option 2,followed by option 1.

TESTING

Each course concludes with a timed written or practicalexam. Students must attain a grade of 70% or better tosatisfactorily complete each course. Certificates andContinuing Education Units (CEU’s) are only issuedfollowing satisfactory completion of the course. A gradetranscript will be issued upon request for a nominal fee.

Students who attain a grade less than 70% can retest for a$300 administrative fee, which can be taken the same day(time permitting) or within a six-month period. Attendanceand successful completion of a technical education coursedoes not guarantee that the student may purchase parts forrepair or replacement from Dräger.

04 |

Nor does it imply that the student has a complete workingknowledge of Dräger equipment. It is the healthcareinstitution’s responsibility to determine the technical aptitudeof the technician.

Attendance and successful completion of Monitoring& Healthcare IT training courses does not prepare thestudent for installation or configuration of complex Drägermedical systems. The courses are designed to provide basicinformation for first-call troubleshooting and basic repairs.These systems should be installed by an appropriatelytrained Dräger representative(s), under the guidelines ofapproved procedures established by Dräger.

TRAINING RECORDS

Specifics about Dräger training events are registered in apermanent training database, including course, location andparticipants. A record of student attendance is availableupon written request only from the student who attended thecourse. Training records are not released to any third partyor employer per Dräger’s training privacy policy. Pleasecontact Dräger Customer Service at 800-437-2437, menuoption 2, followed by option 1 for more information regardingtranscripts.

CANCELLATION POLICY

Substitute attendees are not permitted. Training purchasedby a healthcare institution or included in a strategicalliance agreement may only be used by individuals directlyemployed by that healthcare institution.

Cancellations received, in writing, 15 business days prior tothe course will not be billed for the course. A fee of 50%of the total tuition will be charged for cancellations madeless than 15 business days of the scheduled course date.Please note that if you do not cancel in writing and do notattend, you are still responsible for payment. Dräger reservesthe right to cancel or change course dates due to lowenrollment or other unforeseen circumstances. If Drägercancels a course, you will be given a minimum of15 business days’ notice and the full tuition will be refundedor applied toward any future course. Cancelled studentswill be placed on a priority list for the next available course.Dräger assumes no liability for non-refundable travelexpenses in the event of a course cancellation.

D-4

75-2

017

D-5

7022

-201

4

| 05

TRAVEL

All travel expenses and reservations including airline, rentalcar, and hotel accommodations are the responsibility of thestudent. Lunches on course days are provided and includedas part of the tuition fee.

To allow for adequate travel time to the airport, departingflights should not be scheduled less than three (3) hoursfollowing the conclusion of the course. All courses endno earlier than 4:30 p.m. on the final day.

Students are responsible for arranging their owntransportation to and from the airport and the Drägerfacilities. Information concerning rental cars should beobtained from their travel service provider.

Because our corporate facilities are access badgecontrolled, students should report to the main lobby upontheir arrival on the first day of the course to obtain a visitorbadge.

The Telford, PA (USA) Training Center is locatedapproximately 45 miles northwest of PhiladelphiaInternational Airport and approximately 35 miles south ofLehigh Valley International Airport. The address is:

Draeger, Inc. 3135 Quarry Rd.Telford, PA 18969

The Mississagua, ON (Canada) Training Center is located approximately 1 mile southeast of Toronto Pearson International Airport. The corporate address is:

Draeger Medical Canada, Inc.2425 Skymark Ave, Unit 1&2Mississauga, ON L4W 4Y6

HOTEL ACCOMMODATIONS

(The following locations are suggestions only. Thestudent is not required to stay at these facilities.)

Near the Telford, PA (USA) Training Center

Near the Mississuagua, ON (Canada) Training Center

Travel & Hotel Information

Staybridge Suites (215) 393-8899119 Garden Golf Boulevard · North Wales, PA 19454.

Homewood Suites (215) 362-64001200 Pennbrook Parkway · Lansdale, PA 19446

Holiday Inn Express (215) 529-79791918 John Fries Highway · Quakertown, PA 18951

Hampton Inn (215) 536-7779 1915 John Fries Highway · Quakertown, PA 18951

Spring Hill Suites (215) 529-68001930 John Fries Highway · Quakertown, PA 18951

Marriott Courtyard - Montgomeryville (215) 699-7247544 Dekalb Pike · North Wales, PA 19454

Residence Inn - Montgomeryville (267) 468-01111110 Bethlehem Pike · North Wales, PA 19454

Homewood Suites Toronto Airport (416) 646-46005515 Eglinton Avenue West · Toronto, ON M9C 5K5

TownePlace by Marriott-Airport (800) 257-30005050 Orbitor Drive · Mississauga, ON L4W 4X2

Residence Inn by Marriott Mississauga (905) 602-77775070 Creekbank Road · Mississauga, ON L4W 5R2

06 |

FABIUS® MRI CEU’S: 6

DAYS P/N COURSECODE COST*USD PREREQUISITE(WITHIN3YEARS)

1.0 1902535 R4DCH111EN $1,872.00 FabiusFamily This course is designed to introduce the biomedical professional to the Fabius MRI anesthesia machine. This course will focus on the differences betweenthe Fabius MRI and the rest of the Fabius family. Included will be disassembly and reassembly of the unit and a complete peruse checkout. This course isdesigned as an experiential exercise with presentations on the MRI environment. An instructor is present at all times to assist and answer questions.

APOLLO® CEU’S: 30

DAYS P/N COURSECODE COST*USD PREREQUISITE

5.0 1902156 R4DCH116EN $10,970.00 None During this course, the biomedical professional will receive information about the new and advanced technologies associated with the Apollo anesthesia machine.This anesthesia machine incorporates additional ventilation features not found on other anesthesia devices. This course includes instruction on pneumaticsystems and components, ventilator/absorber systems, monitoring capabilities, and Preventive Maintenance Inspection procedures (Test Certificate).

PERSEUS® CEU’S: 30


5.0 MQ09298 R4DCH120EN $9,559.00 None

During this course, the biomedical professional will receive information about the new and advanced technologies associated with the Perseus anesthesiamachine. This anesthesia system incorporates additional ventilation features not found on other anesthesia equipment. This course includes instruction onpneumatic systems and components, ventilator/absorber systems, monitoring capabilities, and Preventive Maintenance Inspection procedures (Test Certificate).

Anesthesia

FABIUS® FAMILY CEU’S: 24


4.0 1902166 R4DCH110EN $5,735.60 None This course is designed to introduce the biomedical professional to the Fabius family of anesthesia machines. All of these anesthesia machines incorporateventilation features and hardware not found on other anesthesia devices, as well as new technologies in the gas delivery system. The course includesinstruction on the pneumatic and absorber systems, ventilator, monitor technologies, and a detailed Preventive Maintenance Inspection procedure.

TESLA M3 CEU’S: 6


0.5 TBD R4DCH113EN $1,872.00 FabiusMRI This course is designed to introduce the student to the Tesla M3 patient monitor. This course will include the functionality of the Tesla M3 patient monitor and Tesla M3 Remote including all options in combination with the Fabius MRI anesthesia device, this includes pre-use checkout, disassembly and reassembly of the unit. Review the error log for troubleshooting analysis and complete the scheduled preventive maintenance (PM) inspection procedures.

PRIMUS® CEU’S: 30


5.0 MQ00230 R4DCH117EN $10,970.00 None During this course, the biomedical professional will receive information about the advanced technologies associated with the Primus anesthesia machine. Thisanesthesia machine incorporates additional ventilation features not found on other anesthesia devices. This course includes instruction on pneumatic systemsand components, ventilator and monitoring capabilities, and Preventive Maintenance Inspection procedures (Test Certificate). Canada location only.

VAPOR FAMILY CEU’S: 6


1.0 1902159 R4DCH115EN $1,054.00 None This course is designed to introduce the biomedical professional to the distinctive characteristics of both the Dräger Vapor 2000 and 3000. This course willinclude how to dismount and to mount the components and assemblies according to the maintenance and repair section in ServiceConnect®. The participantwill also learn how to do the inspection and output test verification.

| 07

EVITA® INFINITY® V500 / BABYLOG® VN500 CEU’S: 30


5.0 MQ00231 R4DCH200EN $3,864.64 None During this course, students will become skilled in identifying assemblies/subassemblies and enhance their knowledge and understanding of devicefunctions. Basic troubleshooting as well as hands-on training will be included. Upon successful completion of this course, students will be able to identifyand understand the functions of the pneumatic and electrical systems of the V500 and VN500, including the Human Interface Testing (HIT) software andthe optional gas supply unit (GS500). The student will also learn how to perform a scheduled Preventive Maintenance Inspection.

NOTE: A LAPTOP IS NOT REQUIRED DURING THIS SEMINAR. However, working with the V500/VN500 requires the participant to have a laptop computerto perform troubleshooting and the PMI procedure. The laptop must have the following capabilities: Microsoft® Windows® XP or later/NT SP6, NOT includingWindows Vista® or Windows 7; Adobe® Acrobat® 7.0 or higher; Intel® Pentium® 4 or higher processor with at least 512 MB of RAM; DVD-ROM drive capable ofreading dual-layered DVD’s; access to an email account.

Ventilation

EVITA® XL CEU’S: 30


5.0 1902146 R4DCH201EN $3,800.16 None This course will highlight the built-in diagnosis and upgrading tools of the Evita series. The student will become skilled in identifying assemblies/sub-assemblies and gain a depth of knowledge and understanding of the functions and basic troubleshooting of these devices. Upon successful completion of this course, the student will be able to identify and understand the functions of the detachable user interface, the integrated interface, and the pneumatic and electrical systems. The student will also be able to demonstrate competence in performing a scheduled Preventive Maintenance Inspection.

CARINA® CEU’S: 6


1.0 1979851 R4DCH203EN $2,043.60 None Upon successful completion of this course, the student will be able to identify and understand the functions of the pneumatic and electronic systems of theCarina ventilator. The student will also be able to perform basic troubleshooting and demonstrate the proper techniques in the disassembly, assembly andrepair of this device. In addition, the student will learn how to perform the operation verification and complete a scheduled preventive maintenance (PM)inspection.

OXYLOG® 3000 / OXYLOG® 3000+ CEU’S: 6


1.0 1902152 R4DCH206EN $2,043.60 None Upon successful completion of this course, the student will be able to identify and understand the functions of the pneumatic and electronic systems of theOxylog 3000 ventilator. The student will also be able to perform basic troubleshooting and demonstrate the proper techniques in the disassembly, assembly andrepair of these devices. In addition, the student will learn how to perform the operation verification and complete a scheduled Preventive Maintenance Inspection.

SAVINA® CEU’S: 6


1.0 1902165 R4DCH204EN $930.80 Savina300 This course will highlight the built-in diagnosis and upgrading tools of the Savina. The student will become skilled in identifying assemblies/sub-assemblies andgain a depth of knowledge and understanding of the device functions through various lecture and hands-on exercises. Upon successful completion of this course,the student will be able to identify and understand the functions of the operator control panel and the pneumatic and electrical systems. The student will also beable to complete a Preventive Maintenance Inspection, perform basic troubleshooting and operation verification.

SAVINA® 300 CEU’S: 6


3.0 MQ00177 R4DCH205EN $3,346.72 None This course is designed to provide the biomedical professional with specific information related to the Savina 300 operating functions which differ from the Savinaventilator. Upon successful completion of this course, the student will be able to identify and understand the functions of the pneumatic and electrical systems andbe familiar with the Preventive Maintenance Inspection.

08 |

OPEN WARMING THERAPY SYSTEMS CEU’S: 6

CLASS DAYS P/N COURSECODE COST*USD PREREQUISITE(WITHIN3YEARS)

Babytherm®8004/8010 1.0 1902145 R4DCH213EN $2,106.00 None

RadiantWarmer 1.0 1979824 R4DCH210EN $2,106.00 NoneandResuscitaire®BirthingRoomWarmer Upon successful completion of any one of these courses, the student should be able to identify and understand the functions of the heating, controlling andmonitoring systems. The student will also be able to troubleshoot and demonstrate the proper techniques in the disassembly, assembly and repair of thesedevices. In addition, the student will learn how to implement an upgrade, operational verification and complete a scheduled Preventive Maintenance Inspection.

CLOSED WARMING THERAPY SYSTEMS CEU’S: 12


Caleo® 2.0 1902164 R4DCH212EN $2,714.40 None

Isolette®C2000& 2.0 1902175 R4DCH209EN $2,714.40 NoneIsolette®8000

TI500Globe-Trotter® 2.0 1902177 R4DCH208EN $2,714.40 None

NeonatalTransportSystem

Upon successful completion of any one of these courses, the student will be able to identify and understand the functions of the heating, humidifying, controlling, O

2 supply, power supply and monitoring systems. The student will also be able to troubleshoot the equipment and demonstrate the proper

techniques in the disassembly, assembly and repair of these devices. In addition, the student will learn how to implement an upgrade, operational verificationand complete a scheduled Preventive Maintenance Inspection.

Warming Therapy

INCUWARMER CEU’S: 18


Babyleo®TN500 3.0 1903324 WWDCHT05EN $3995.00 None During this course, students will become skilled in identifying assemblies/sub-assemblies and enhance their knowledge and understanding of devicefunctions. Basic troubleshooting as well as hands-on training will be included. Upon successful completion of this course, students will be able to identifysub-assemblies and understand the functions of the Babyleo TN500, including function on the Open and Closed modes and the Human Interface Testing(HIT) software. The student will also learn how to perform a scheduled Preventive Maintenance Inspection.

| 09

Monitoring & HealthCare IT

10 |

Attendance and successful completion of the Monitoring & Healthcare IT training courses does not prepare the student forinstallation or configuration of complex Dräger medical systems. The courses are designed to provide basic informationfor first-call troubleshooting and basic repairs. These systems should be installed by an appropriately appointed,technically trained Dräger representative(s), under the guidelines of approved procedures established by Dräger.

NETWORK FUNDAMENTALS THEORY CEU’S: 12


2.0 1902805 R4DCH300EN $1,000.00 None This course introduces the student to fundamental computer networking concepts and how they’re applied to the Dräger Omega and Omega-S products. Thiscourse is the introduction to further study in the Dräger healthcare field and is required for networking other Dräger Monitoring & Healthcare IT product courses.

A list of the basic networking concepts discussed and applied will be:— Networking topologies (wired), their necessary communication protocols, and terminology.— TCP/IP network configuration (addressing, subnetting and planning) and how it is applied to integrate with the Infinity Omega and Omega-S.— LAN and WAN technologies, and how Infinity Omega and Omega-S solutions integrate with each.

To fully grasp the concepts of networking in regards to the Dräger Omega and Omega-S products it is highly recommended that the student attend this courseregardless of IT skillset.

ADVANCED INFINITY® NETWORKING CEU’S: 15


3.0 1902536 R4DCH300EN $1,500.00 *See below (within course description) This seminar continues where the Network Fundamentals Theory seminar left off. It introduces the learner to networking concepts and how they’re applied to therest of the Infinity® Monitoring and Healthcare IT product line. The seminar will be a combination of lecture and hands-on learning using the latest networkingappliances and Dräger equipment. Each student will be required to configure multiple devices including, but not limited to, Cisco 2600 series routers, switchesand a host of Draeger Infinity® products.

A list of the basic networking concepts discussed and applied will be:— Networking topologies (wireless), their necessary communication protocols, and terminology.— LAN and WAN technologies, and how Dräger’s Infinity Monitoring and Healthcare products integrate with each.— VLAN planning and application using managed switches and wireless devices.— Basic routing concepts using Cisco® devices for configuration and practical application within an Infinity network.— The student will also be challenged with a number of hands-on exercises that are centered around troubleshooting, error management and proper network capacity usage techniques.

To fully grasp the concepts of the Infinity Monitoring and Healthcare IT product line it is highly recommended that the student attend this course regardless of ITskillset. The methods used to fully configure and integrate a Dräger device onto an Infinity network go beyond basic computer networking and configuration skills.This Advanced Infinity Networking course curriculum brings these concepts into the forefront of the lectures and hands-on exercises, and thus allowing the student to become comfortable utilizing these universal concepts in a Dräger specific way.

*Advanced Infinity Networking course prerequisites. Appropriate IT skills and/or experience needed to attend this class are as follows:— IP addressing— Network layers (OSI model)— Routing— Switches and hubs— LAN and WAN technologies— VLAN design— Network diagnostic tools and protocols— Port management and configuration

The following vendor-specific IT Certifications can be presented in lieu of not attending this course:— Cisco CCNA®

— Cisco CCNP®


| 11

In order to better support our customer’s scheduling andtravelling limitations, we have realigned the monitoringclasses into sequential courses (or tracks) based upon thecommon dispositions of Dräger equipment. See the diagrambelow for a clearer picture of these tracks and how theydiffer. Please be sure to mention them when scheduling so

that we may schedule you appropriately. Those customersthat select the Omega track do NOT need to take theAdvanced Infinity Networking course to join the InfinityExplorer Basic course, as required for those that are takingthe IACS or Monitors tracks.


INFINITY® ACUTE CARE SYSTEM CEU’S: 30


5.0 MQ00250 R4DCH318EN $6,068.40 AdvancedInfinityNetworking This seminar is designed to introduce the biomedical professional to the Infinity Acute Care System (IACS) monitoring solution. The content of the seminardetails the following products that make up of the IACS (C500/C700 Medical Cockpit, M540 patient monitor, M500 docking station and P2500 power supply).This seminar includes product overviews, configuration of the system, testing the operation of the system and communications troubleshooting.Upon successful completion of this seminar, the participant will be able to do the following: explain software versions and software download procedures,detail the options concerning each unit, discuss and perform repair and maintenance for each unit, perform practical operational exercises on each unitand complete a Preventive Maintenance Inspection.

Attendance and successful completion of the Monitoring & Healthcare IT training courses does not prepare the student for installation or configuration of complex Dräger medical systems. The courses are designed to provide basic informationfor first-call troubleshooting and basic repairs. These systems should be installed by an appropriately appointed,technically trained Dräger representative(s), under the guidelines of approved procedures established by Dräger.

INFINITY® GATEWAY CEU’S: 12


2.0 MQ09840 R4DCH309EN $2,980.00 NetworkFundamentalsTheoryand

AdvancedInfinityNetworking Advanced Infinity NetworkingThe Infinity Gateway Suite software applications are intended to provide clinicians with the capacity of viewing patient data remotely via the Infinity Network and forthe data exchange of select clinical and administrative information between the Infinity Network and the hospital network.Upon completion of this 2-day course students will be able to:– Install Infinity Gateway– Install Patient Watch– Detail HL7 and how it relates to Infinity Gateway– Detail ADT Interfaces– Detail and use troubleshooting tools associated with the Infinity Gateway Suite

INFINITY® CENTRALSTATION (VG) CEU’S: 12


3.0 1903170 R4DCH304EN $3,640.00 AdvancedInfinityNetworking This seminar is designed to introduce the biomedical professional to the service-related operations, configuration and physical layout of the InfinityCentralStation that is running VG software, along with its role within the Infinity network. Upon successful completion of this seminar, the participant will beable to do the following: explain software versions and software download procedures, detail the options concerning each unit, discuss and perform repairand maintenance for each unit, perform practical exercises of operation on each unit and complete a Preventive Maintenance Inspection.

INFINITY® CENTRALSTATION (VF) CEU’S: 12


3.0 1979823 R4DCH303EN $3,640.00 AdvancedInfinityNetworking This seminar is designed to introduce the biomedical professional to the service-related operations, configuration and physical layout of the Infinity CentralStationthat is running VF software, along with its role within the Infinity network. Upon successful completion of this seminar, the participant will be able to do thefollowing: explain software versions and software download procedures, detail the options concerning each unit, discuss and perform repair and maintenance foreach unit, perform practical exercises of operation on each unit and complete a Preventive Maintenance Inspection.

INFINITY® EXPLORER BASIC CEU’S: 18


3.0 MQ00187 R4DCH313EN $3,640.00 AdvancedInfinityNetworking This seminar is intended to introduce the biomedical professional to the service-related operations, configuration and physical layouts of the Infinity C700for IT workstation, Infinity Explorer software, and Omega solutions (Omega/Omega-S), along with its role in the Infinity Network. Upon successful completionof this seminar, the participant will be able to do the following: explain software versions and download procedures, install and configure software, installDräger client applications, implement Microsoft® Windows® updates and hotfixes, execute repair and maintenance procedures, perform practical operationalexercises on the unit and complete a Preventive Maintenance Inspection.

12 |

INFINITY® M300 TELEMETRY CEU’S: 12


2.0 1902532 R4DCH314EN $2,427.00 InfinityCentralStation This seminar is intended to introduce the biomedical professional to the Infinity M300 wireless patient monitor and patient-worn telemetry device. This courseincludes the programming and care of the Infinity M300 and the configuration of the Infinity CentralStation (ICS) as it pertains to the interaction of the M300monitor. Upon successful completion of this seminar, the participant will be able to do the following: explain software versions and software download procedures,detail the options concerning each unit, discuss and perform repair and maintenance, perform practical operational exercises and complete a PreventiveMaintenance Inspection.

INFINITY® MODULAR MONITOR SERIES WITH SCIO® CEU’S: 12


5.0 1902172 R4DCH302EN $6,068.40 AdvancedInfinityNetworking This seminar is designed to introduce the biomedical professional to the Infinity Delta/Delta XL/Kappa/Gamma XL monitors and the Scio gas module. Thisseminar includes instruction on the service-related operation, configuration, and NBP calibration/characterization. Upon successful completion of this seminar,the participant will be able to do the following: explain software versions and software download procedures, detail the options concerning each unit, discussand perform repair and maintenance for each unit, perform practical operational exercises on each unit and complete a Preventive Maintenance Inspection.

INFINITY® SYMPHONY CEU’S: 6


1.0 1979822 R4DCH310EN $1,490.00 NetworkFundamentalsTheoryand

AdvancedInfinityNetworking Advanced Infinity NetworkingInfinity Symphony Suite is a web-based application that expands your access to valuable patient information stored on the Infinity CentralStation database bymaking it available virtually anywhere via the hospital network.

In this 1-day seminar participants will:– Install Infinity Symphony– Add users in Symphony– Configure Symphony with an ICS– Export Reports

| 13

14 |

2019 Seminar Dates (July-December) Dräger Technical Training

ANESTHESIA

SEMINAR COURSECODE DATE LOCATION

Apollo® R4DCH116EN Jul 29 - Aug 2 Telford, PAApollo® R4DCH116EN Aug 12 - 16 Telford, PAApollo® R4DCH116EN Oct 14 - 18 Telford, PAApollo® R4DCH116EN Nov 11 - 15 Telford, PA Fabius® Family R4DCH110EN Jul 8 - 11 Telford, PAFabius® Family R4DCH110EN Aug 5 - 8 Telford, PAFabius® Family R4DCH110EN Sep 9 - 12 Telford, PAFabius® Family R4DCH110EN Sep 30 - Oct 3 Telford, PAFabius® Family R4DCH110EN Nov 18 - 21 Telford, PA Fabius® MRI R4DCH111EN Aug 9 Telford, PAFabius® MRI R4DCH111EN Oct 4 Telford, PA Perseus® R4DCH120EN Aug 26 - 30 Telford, PAPerseus® R4DCH120EN Sep 23 - 27 Telford, PAPerseus® R4DCH120EN Oct 21 - 25 Telford, PAPerseus® R4DCH120EN Nov 18 - 22 Mississauga, ON

Tesla M3 R4DCH113EN Aug 9 Telford, PATesla M3 R4DCH113EN Oct 4 Telford, PA

Vapor Family R4DCH115EN Jul 12 Telford, PAVapor Family R4DCH115EN Sep 13 Telford, PAVapor Family R4DCH115EN Nov 22 Telford, PA

Because courses are subject to date changes or cancellation due to low enrollment. Please contact Dräger for

confirmation: email: [email protected] or phone: 800-437-2437, menu option 2, followed by option 1.

VENTILATION


Carina® R4DCH203EN Oct 10 Telford, PA Evita® Infinity® V500 / Babylog® VN500 R4DCH200EN Aug 5 - 9 Telford, PAEvita® Infinity® V500 / Babylog® VN500 R4DCH200EN Aug 26 - 30 Telford, PAEvita® Infinity® V500 / Babylog® VN500 R4DCH200EN Sep 23 - 27 Telford, PAEvita® Infinity® V500 / Babylog® VN500 R4DCH200EN Oct 14 - 18 Telford, PAEvita® Infinity® V500 / Babylog® VN500 R4DCH200EN Oct 21 - 25 Telford, PAEvita® Infinity® V500 / Babylog® VN500 R4DCH200EN Nov 11 - 15 Telford, PAEvita® Infinity® V500 / Babylog® VN500 R4DCH200EN Dec 9 - 13 Telford, PA Evita® XL R4DCH201EN Aug 19 - 23 Telford, PA Oxylog® 3000 / Oxylog® 3000+ R4DCH206EN Oct 9 Telford, PA Savina® R4DCH205EN Nov 19 - 21 Telford, PASavina® 300 R4DCH204EN Nov 22 Telford, PA

CLOSED WARMING THERAPY SYSTEMS


Isolette® C2000 & Isolette® 8000 R4DCH209EN Dec 17 - 18 Telford, PA

TI500Globe-Trotter® R4DCH208EN Oct29 TelfordPA

| 15

MONITORING & HEALTHCARE IT


AdvancedInfinity®Networking R4DCH318EN Aug7-9 Telford,PA

AdvancedInfinity®Networking R4DCH318EN Oct9-11 Telford,PA

Infinity®AcuteCareSystemMonitoring R4DCH318EN Aug12-16 Telford,PA

Infinity®AcuteCareSystemMonitoring R4DCH318EN Oct14-18 Telford,PA

Infinity®CentralStation(VF) R4DCH303EN Nov18-20 Telford,PA

Infinity®CentralStation(VG) R4DCH304EN Aug19-21 Telford,PA

Infinity®CentralStation(VG) R4DCH304EN Oct21-23 Telford,PA

Infinity®ExplorerBasic R4DCH313EN Nov6-8 Telford,PA

Infinity®Gateway R4DCH309EN Sep4-5 Telford,PA

Infinity®M300Telemetry R4DCH314EN Aug22-23 Telford,PA

Infinity®M300Telemetry R4DCH314EN Oct24-25 Telford,PA

Infinity®M300Telemetry R4DCH314EN Nov21-22 Telford,PA

Infinity®ModularMonitorSerieswithSCIO® R4DCH302EN Nov11-15 Telford,PA

InnovianSystemsAdministrators(VA) R4DCH315EN Aug26-27 Telford,PA

Innovian6VABoxReplacement(VA) R4DCH316EN Aug28-29 Telford,PA

NetworkFundamentalsTheory R4DCH300EN Aug5-6 Telford,PA

NetworkFundamentalsTheory R4DCH300EN Oct7-8 Telford,PA

NetworkFundamentalsTheory R4DCH300EN Nov4-5 Telford,PA

2019 Seminar Dates (July-December) Dräger Technical TrainingBecause courses are subject to date changes or cancellation due to low enrollment. Please contact Dräger for

confirmation: email: [email protected] or phone: 800-437-2437, menu option 2, followed by option 1.

OPEN WARMING THERAPY SYSTEMS

SEMINAR COURSECODE DATE LOCATIONBabytherm® 8004/8010 R4DCH213EN Sep 18 Telford, PARadiant Warmer and Resuscitaire® Birthing Room Warmer R4DCH210EN Dec 19 Telford, PA

INCUWARMER

SEMINAR COURSECODE DATE LOCATIONBabyleo® TN500 R4DCH211EN Aug 13 - 15 Telford, PA

Babyleo® TN500 R4DCH211EN Nov 5 - 7 Telford, PA

16 |

Dräger Registration FormMust be mailed, faxed or emailed to confirm enrollment Page 1 of 2

Fax or email completed form to: 215-723-5935 or [email protected]

Name

Employer

Address

City

State

Title

Phone

Fax

Email

Zip

COURSE SELECTIONS:

Please check here if you have special needs that may affect your participation (a representative will contact you to discuss your request).

REGISTRATIONClassspaceislimitedandstudentsareenrolledonafirst-come,first-servedbasis.YoumaycontactDrägerCustomerServiceat800-437-2437,menuoption2,followedbyoption1toverifycourseavailability.Pleasenotethedurationofeachclasswhenselectingyourcourses,asthiswilldetermineyourlengthofstay.AletterofconfirmationwillbesenttothestudentviaU.S.Mail,faxoremailtoconfirmregistration.Readthislettercarefully.Ifcorrectionsareneeded,contactourCustomerServiceCenterimmediately.Avalidandcompleteemailaddressisrequiredforregistration.Pleasenotethatpersonalemailaddresses(Gmail,Hotmail,Yahoo,etc.)willnotbeconsideredasvalidforregistration.Onlyemailaddressesofthestudent’semployerwillbeaccepted.

TUITIONYourtuitionpaymentcoversthecostofallcoursematerials,instruction,lunchandrefreshments.Pricesaresubjecttochangewithoutnotice.Alltravel,expensesandhotelaccommodations,includingmealsoutsideofDräger,arethesoleresponsibilityofeachregisteredparticipant.TuitionpaymentMUSTbeprovidedatthetimeofregistration.

IMPORTANT: CANCELLATIONSCancellationsreceived,inwriting,15businessdayspriortothecoursewillnotbebilledforthecourse.Afeeof50%ofthetotaltuitionwillbechargedforcancellationsreceivedlessthan15businessdaysofthescheduledcoursedate.Pleasenotethatifyoudonotcancelinwritinganddonotattend,youarestillresponsibleforpayment.Drägerreservestherighttocancelorchangethecoursedatesduetolowenrollmentorotherunforeseencircumstances.IfDrägercancelsacourse,youwillbeprovidedwithaminimumof15businessdays’noticeandthefulltuitionwillberefundedorappliedtowardanyfuturecourse.Cancelledstudentswillbeplacedonaprioritylistforthenextavailablecourse.Drägerassumesnoliabilityfornon-refundabletravelexpensesintheeventofacoursecancellation.

CourseinstructionwillprovidethestudentwithproprietaryinformationofDrägerproducts.Thisinformationshallnotbereproduced,distributed,usedordisclosedinwholeorinpartunlessotherwiseauthorizedbyDrägerinwriting.

SELECTION # 1

Course Title Course Date Course Code

Course Fee USD

SELECTION # 2


Course Fee USD

SELECTION # 3


Course Fee USD

SELECTION # 4


Course Fee USD

| 17

Dräger Registration FormMust be mailed, faxed or emailed to confirm enrollment Page 2 of 2

METHOD OF PAYMENT:

Payment must accompany the registration form in order to process registration.

Purchase Order No. Today’s Date

If included with machine purchase, please list:

Purchase Order No. Sales Order No.

Fax or email completed form to: 215-723-5935 or [email protected]

Dräger, is authorized to charge the credit card below for my seminar registration fees in the amount on this form

Mastercard Visa American Express

Credit Card Acct No. CSC/CID Code

Expiration Date

Card Holder Email Card Holder Phone

Signature of Card Holder

Print Full Name

AUTHORIZATIONYes, I accept the Dräger Registration, Tuition, and Cancellation policy. The Participant that registers for and attends thecourse associated with this sales order must be an employee of the purchasing facility and may be required to show proof ofemployment. Registration is not transferable.

Student Signature (REQUIRED)

Signature Print Name

Student’s Supervisor Signature (REQUIRED)

Signature Print Name

I am enclosing a check – made payable to “Draeger” in the amount of $

For Payments and/or inquiries contact

PHONE (800) 437-2437, option 4

FAX (215) 723-5935

WEB www.draeger.com

EMAIL [email protected]

MAIL Draeger, Inc.

3135 Quarry Road · Telford, PA 18969

AA

MI C

redentials Institute

• CEU PRE -A PPROVED

•

Draeger, Inc. is accredited as an Authorized Provider by theAssociation for the Advancement of Medical Instrumentation(AAMI), 4301 N. Fairfax Drive, Suite 301, Arlington, VA 22203-1633; 1-703-525-4890. In obtaining this approval, Draeger, Inc.has demonstrated that it complies with the AAMI Standardwhich is recognized internationally as a standard of goodpractice. As a result of their Authorized Provider accreditationstatus, Draeger, Inc. is authorized to offer AAMI CEUs for itsprograms that qualify under the AAMI Standard.

90 7

1 40

2 |

19.

05-1

| K

M |

LL

| S

ubje

ct t

o m

odifi

catio

ns |

© 2

019

Drä

gerw

erk

AG

& C

o. K

GaA

Manufacturer:Drägerwerk AG & Co. KGaAMoislinger Allee 53–5523558 Lübeck, Germany

CORPORATE HEADQUARTERSDrägerwerk AG & Co. KGaAMoislinger Allee 53–5523558 Lübeck, Germany

www.draeger.com

USADraeger, Inc.3135 Quarry Road Telford, PA 18969-1042 Tel +1 800 4DRAGER(+1 800 437 2437)Fax +1 215 723 [email protected]

CANADADraeger Medical Canada Inc.2425 Skymark Avenue, Unit 1Mississauga, Ontario, L4W 4Y6Tel +1 905 212 6600Toll-free +1 866 343 2273Fax +1 905 212 [email protected]

Locate your Regional Sales Representative at: www.draeger.com/contact

Not all products, features, or services are for sale in all countries. Mentioned Trademarks are only registered in certain countries and not necessarily in the country in which this material is released. Go to www.draeger.com/trademarks to find the current status.

Dräger Technical Training - Draeger€¦ · 4301 N. Fairfax Drive, Suite 301, Arlington, VA...

Documents

Transcript of Dräger Technical Training - Draeger€¦ · 4301 N. Fairfax Drive, Suite 301, Arlington, VA...