Drawing North Symbol
-
Upload
craciun-paul -
Category
Documents
-
view
216 -
download
0
Transcript of Drawing North Symbol
-
8/9/2019 Drawing North Symbol
1/3
Copyright Tekla Corporation
Drawing North Symbol1. Purpose and description
Creates new symbol on drawing and manages the rotation to match the project northsettings.
2. System requirements
.NET Framework version: 4.0
Environments: US Imperial, US Metric
Languages: English
3. Installation
To install the extension:
1. Close down Tekla Structures (if running)
2. Download MSI Installer from Tekla extranet
3. Install and run MSI Installer
4. Start up Tekla Structures
5. Open an existing drawing
6. Drag and dock the new toolbar
4. Usage
To use the extension:
1. From the drawings > from the new toolbar run either plugin
2. Select a point anywhere in the drawing or drawing view
4.1. North Settings
Under the main Tekla Structures Menu for Tools > Options > Options: Orientation marks, setthe North direction field to measure from the x-axis the degrees to point north for the project.
-
8/9/2019 Drawing North Symbol
2/3
Copyright Tekla Corporation
4.2. Symbol Setup
Import your north symbol into the symbol editor and orientate so that north is up on screen,as shown below.
-
8/9/2019 Drawing North Symbol
3/3
Copyright Tekla Corporation
5. Settings
Create new symbol setting files that use the symbol file where the north graphic is located.You might want several new setting files if you have text as part of the symbol that needs tobe positioned different relative to the symbol. In such cases, you might need multiplesymbols in the same file, but different cell positions. You need these saved attribute files forsymbols in order to be able to reference them in the plugin.
6. Limitations
This extension is intended to be used only on plan drawings.