DRAW-TITE CUSTOM BUILT TRAILER HITCHESswcompanies.net/admin/brochures/43.pdfDRAW-TITE® CUSTOM BUILT...

16
A-1 RECEIVER HITCHES DRAW-TITE ® CUSTOM BUILT TRAILER HITCHES DRAW-TITE GIVES YOU TOP QUALITY IN EVERY HITCH AND RECEIVER WE MAKE: • Solid all-welded construction for maximum strength and safety. • Custom built according to manufacturer vehicle weight specifications and model year to ensure perfect fit and top towing performance. • All Draw-Tite hitches meet and exceed V-5 and SAE J684 standards and are inspected for quality and workmanship. • Computer-aided design and fatigue stress testing ensure a strong design that will withstand road abuse within specified capacities. • Finish is black powder coat over e-coat (industry leading corrosion resistance). • Backed by a nationwide limited lifetime warranty. GROSS TRAILER WEIGHT * NOTE: SOME CLASS V RECEIVERS EXCEED THE ABOVE CHART. lbs. 1K 2K 3K 4K 5K 6K 7K 8K 9K 10K 11K 12K 13K 14K 15K 16K 17K 18K CLASS I CLASS II CLASS III/IV W/ WEIGHT DIST. CLASS V (2” square receiver opening)* CLASS V (2-1/2” square receiver opening)* SELECTING THE RIGHT HITCH • Determine the Gross Trailer Weight and Gross Tongue Weight of the trailer that you would like to tow. Check with the trailer manufacturer or if you are not sure, have it towed to a government inspection scale. Remember that the G.T.W. should reflect a fully loaded trailer. • Consult your vehicle’s owner’s manual to determine if your vehicle is rated to safely tow your trailer. • Use the chart to figure out the minimum “Class” of hitch that is required. • Consult a Draw-Tite dealer to find out which hitches are available for your vehicle. Or visit our website: www.draw-tite.com.

Transcript of DRAW-TITE CUSTOM BUILT TRAILER HITCHESswcompanies.net/admin/brochures/43.pdfDRAW-TITE® CUSTOM BUILT...

A-1

RE

CE

IVE

R H

ITC

HE

S

DRAW-TITE® CUSTOM BUILT TRAILER HITCHES

DRAW-TITE gIVES yOU TOp qUALITy In EVERy HITCH AnD RECEIVER WE MAkE:

• Solidall-weldedconstructionformaximumstrengthandsafety.

• Custombuiltaccordingtomanufacturervehicleweightspecificationsandmodelyeartoensureperfectfitandtoptowingperformance.

• AllDraw-TitehitchesmeetandexceedV-5andSAEJ684standardsandareinspectedforqualityandworkmanship.

• Computer-aideddesignandfatiguestresstestingensureastrongdesignthatwillwithstandroadabusewithinspecifiedcapacities.

• Finishisblackpowdercoatovere-coat(industryleadingcorrosionresistance).

• Backedbyanationwidelimitedlifetimewarranty.

G R O S S T R A I L E R W E I G H T

* NOTE: SOME CLASS V RECEIVERS EXCEED THE ABOVE CHART.

lbs. 1K 2K 3K 4K 5K 6K 7K 8K 9K 10K 11K 12K 13K 14K 15K 16K 17K 18K

CLASS I

CLASS II

CLASS III/IV W/ WEIGHT DIST.

CLASS V (2” square receiver opening)*

CLASS V (2-1/2” square receiver opening)*

SELECTIng THE RIgHT HITCH

• DeterminetheGrossTrailerWeightandGrossTongueWeightofthetrailerthatyouwouldliketotow.Checkwiththetrailermanufacturerorifyouarenotsure,haveittowedtoagovernmentinspectionscale.RememberthattheG.T.W.shouldreflectafullyloadedtrailer.

• Consultyourvehicle’sowner’smanualtodetermineifyourvehicleisratedtosafelytowyourtrailer.

• Usethecharttofigureouttheminimum“Class”ofhitchthatisrequired.

• ConsultaDraw-Titedealertofindoutwhichhitchesareavailableforyourvehicle.Orvisitourwebsite:www.draw-tite.com.

A-2

RECEIVER HITCHES

www.cequentgroup.com ©2011CequentPerformanceProducts,Inc.P/N98929-2012Rev.A.11/11for2012

RE

CE

IVE

R H

ITC

HE

S

RECEIVER HITCHESDraw-Tite® Receiver Hitches - Class I / II

Draw-Tite® Receiver Hitches - Class III / IV

Draw-Tite® Receiver Hitches - Class V Ultra Frame®

Draw-Tite® Receiver Hitches - Class V Ultra Frame® with Cast Center Section

Hidden Hitch® Receiver Hitches - Class I / II

Hidden Hitch® Receiver Hitches - Class III / IV

Reese® Receiver Hitches - Class III / IV

Reese® Receiver Hitches - Class V Titan®

Reese® Receiver Hitches - Super Titan®

Pro Series™ Receiver Hitches - Class I / II

Pro Series™ Receiver Hitches - Class III / IV

ULTRA FRAME® CLASS V RECEIVER HITCHESUltra Frame® Class V Receiver Hitches

Ultra Frame® Class V Receiver Hitches with Cast Center Section

Ultra Frame® Ball Mounts

Ultra Frame® Hitch Balls

Ultra Frame® Trunnion Style Weight Distribution

Ultra Frame® Work Truck Hitch

TITAN® CLASS V RECEIVER HITCHESTitan® Class V Receiver Hitches

Titan® Ball Mounts

Titan® Hitch Balls

Titan® Receiver Extensions / Reducer Sleeve

Titan® Trunnion Style Weight Distribution

SUPER TITAN® RECEIVER HITCHESSuper Titan® Receiver Hitches

Super Titan® Ball Mounts with Hitch Balls

Super Titan® Accessories

Super Titan® Pintle Hook Mount

MOTORHOME HITCHESMulti-Fit Motorhome Hitches

Universal Motorhome Hitches

Motorhome Class III Receiver Hitches

Step Bumper Hitches

Class III Roll Pan Receiver Hitches

FRONT MOUNTED RECEIVERS / ACCESSORIESFront Mounted Receivers

Front Mounted Receiver Accessories

HITCH ACCESSORIESCombo Bars

Fasteners

Safety Chain Loops

A-3

RECEIVER HITCHESR

EC

EIV

ER

HIT

CH

ES

www.cequentgroup.com ©2011CequentPerformanceProducts,Inc.P/N98929-2012Rev.A.11/11for2012

DRAw-TITE gIVES yOU TOP qUALITy IN EVERy HITCH AND RECEIVER wE MAkE:

• Solidall-weldedconstructionformaximumstrengthandsafety• Custombuiltaccordingtomanufacturer&modelyeartoensureperfectfitand

toptowingperformance• Computer-aideddesignandfatiguestresstestingensureastrongdesignthat

willwithstandroadabusewithinspecifiedcapacities• AllhitchesmeetorexceedV-5andSAEJ684standardsandareinspectedfor

qualityandworkmanship• Backedbyanationwidelimitedlifetimewarranty• Blackpowdercoatfinishovere-coat

NOw yOU SEE IT, NOw yOU DON’T! ONCE INSTALLED THE INVISIbLE HITCH IS COMPLETELy HIDDEN FROM VIEw!

soldseparatelysoldseparately

CLASS I SPORTFRAME™ PartNo.Series24XXX

• 1-1⁄4”squarereceivertubeopening• EconomicalClassIreceiverstylehitch• Comescompletewithremovabledrawbar,pinandclip• Attachestovehicleframeand/orbumper• Blackpowdercoatfinishovere-coat

Maximum Rated CapacityDescription Gross Trailer Wt. Tongue Wt.WeightCarrying Upto2,000lbs. Upto200lbs.

2845128351

CLASS I/II INVISI-HITCH™ PartNo.Series285XX

•1-1⁄4”squarereceivertubeopening•Onepiececonstructionforastrongerhitchandeasierinstallation•Directattachmentallowshitchtobeaffixedwellundervehiclefor minimumvisibilitywhendrawbarisremoved•Includesmountinghardwareandeasytoreadinstructions•Removabledrawbar&accessoryadaptersoldseparately

• Blackpowdercoatfinishovere-coat

Maximum Rated CapacityDescription Gross Trailer Wt. Tongue Wt.WeightCarrying Upto3,500lbs. Upto300lbs.

CLASS II FRAME HITCH™ PartNo.Series36XXX

• 1-1⁄4”squarereceivertubeopening• Receiverstylehitchwithremovabledrawbar• Comescompletewithremovabledrawbar,pinandclip• Neatappearanceandallframeattachments• Blackpowdercoatfinishovere-coat

Maximum Rated CapacityDescription Gross Trailer Wt. Tongue Wt.WeightCarrying Upto3,500lbs. Upto300lbs.

HitcH / Accessory - rAting guideScanthisbarcodewithyourmobilephonetoaccess:www.cequentgroup.com/accessrating.asp

A-4

RECEIVER HITCHES

www.cequentgroup.com ©2011CequentPerformanceProducts,Inc.P/N98929-2012Rev.A.11/11for2012

RE

CE

IVE

R H

ITC

HE

S

CLASS III/IV SqUARE & ROUND TUbE MAX-FRAME™ RECEIVERS PartNo.Series75XXX

• 2”squarereceivertubeopening• Max-Framereceiversaredesignedforcustomerswithtrucks,vansandsport

utilityvehicles• Designedfortoday’sstylishsportutilityvehicles,roundtubereceivers

complementvehicleappearance• Allframeattachments• Blackpowdercoatfinishovere-coat• Ballmount,hitchball,wiringandaccessoriessoldseparately• J-Pin®ready

• 75XXXballmounts#23and#53areavailable(Max-FrameProgram)

Maximum Rated CapacityDescription Gross Trailer Wt. Tongue Wt.WeightCarrying Upto8,000lbs. Upto1,200lbs.WeightDistributing Upto12,000lbs. Upto1,200lbs.

See page A-5 for accessories for the Ultra Frame Receivers

CLASS V ULTRA FRAME® RECEIVERS PartNo.Series419XX• 2”squarereceivertubeopening• Designedforfull-sizelongwheelbasetrucks,vansandutilityvehicleswithfull

framesandheavy-dutysuspensions• Idealforhightongueweightapplications(Example:ToyHauler)• Strong,secureheavy-dutysidebracketdesign• Allframeattachments• J-Pin®ready• Blackpowdercoatfinishovere-coat• nEW! RedesignofUltraFrame®receiverstoincludeCastCenterSection • Newruggedappearance • Caststeelmaterial • Biggerchainloops • Tighterballmountfit • Reinforcedpinhole

Maximum Rated CapacityDescription Gross Trailer Wt. Tongue Wt.CLASS V ULTRA FRAME® RECEIVERSWeightCarrying Upto15,000lbs. Upto1,500lbs.WeightDistributing Upto16,000lbs. Upto1,600lbs.CLASS V ULTRA FRAME® RECEIVERS WITh CAST CEnTER SECTIonWeightCarrying Upto16,000lbs. Upto2,400lbs.WeightDistributing Upto16,000lbs. Upto1,600lbs.NOTE: Contact Customer Service for availability of new Cast Center Section part numbers

CLASS III/IV MAX-E-LOADER™ RECEIVERS PartNo.Series41XXX

• 2”squarereceivertubeopening• Max-E-Loader’slongsidebracketdesigndistributesthetowingloadovera

greaterportionofthetowvehicleframe• Allframeattachments• J-Pin®ready• Blackpowdercoatfinishovere-coat

Maximum Rated CapacityDescription Gross Trailer Wt. Tongue Wt.WeightCarrying Upto6,000lbs. Upto600lbs.WeightDistributing Upto12,000lbs. Upto1,200lbs.

ULTRAFRAME®RECEIVERSWithCastCenterSection

A-5

RE

CE

IVE

R H

ITC

HE

S

www.cequentgroup.com ©2011CequentPerformanceProducts,Inc.P/N98929-2012Rev.A.11/11for2012

ULTRA FRAME® ACCESSORIES

ULTRA FRAME® HITCH bALLSBall Shank Shank Drawbar GTWDia. Finish Dia. Length Thickness GVWRA Zinc Chrome B C Range Rating

2-5/16” 63835 63834 1-1/4” 2-3/4” 3⁄8”-1” 12,0002-5/16” - 63836 1-1/4” 2-3/4” 3/8”-1” 14,0002-5/16” - 63840 1-1/4” 2-3/4” 3/8”-1” 20,000

ULTRA FRAME® wEIgHT DISTRIbUTINg TRUNNION STyLE•Raisedhitchballplatformeliminatestheneedforraisedhitchballs•Easy-to-useserratedwasher•Forgedballplatformandspringbarmounts•Ratedupto15,000lbs.GTW/1,500lbs.TW

Part no. Description Gross Trailer Wt. Tongue Wt.

66131 WeightDistibutingHitch 15,000lbs. 1,500

Use Shank #63970 or #63971

All hitch balls designed with wrench flats

ULTRA FRAME® SOLID SHANk bALL MOUNTS

Part no.Rating (lbs.)

GTW/TWBall hole

SizeA

LengthB

RiseC

Drop Style

4280 12,000/1,200 1-1/4” 8-1/2” 1” 2” 14284 12,000/1,200 1-1/4” 12” 1” 2” 14281 12,000/1,200 1-1/4” 8-1/2” 3” 4” 34285 12,000/1,200 1-1/4” 12” 3” 4” 34282 12,000/1,200 1-1/4” 9-1/2” 5” 6” 34283 12,000/1,200 1-1/4” 9-1/2” 7” 8” 3

STYLE1

STYLE3

66131

See page A-4 for Ultra Frame™ Receivers

A-6www.cequentgroup.com ©2011CequentPerformanceProducts,Inc.P/N98929-2012Rev.A.11/11for2012

RE

CE

IVE

R H

ITC

HE

S

ULTRA FRAME® & ACCESSORIES

ULTRA FRAME® woRk TRUck hiTch

• VeRSAtile FoR VARioUS mAkeS And modelS

• FAbRicAtion kit ReqUiReS Welding

• 41991 SAtiSFieS dot Sec. 393 .86 (b) (1)

mix & mAtch centeR Section And Side bRAcketS

mAnUFActURed FoR SeRVice body & FlAt bed StAke tRUckS

#41991 - 62” center Section

#41990 - 44” center Section

#4916 - Side bracket kit

#4907 - Side bracket kit

#58374 - end caps are also avalable

ULTRA FRAME® SERVICE bODy RECEIVERSPart no. Description GTW TW

41991-07 Includes41991(62”)&4907 16,000lbs. 1,600lbs.41991-16 Includes41991(62”)&4916 16,000lbs. 1,600lbs.41990-07 Includes41990(44”)&4907 16,000lbs. 1,600lbs.41990-16 Includes41990(44”)&4916 16,000lbs. 1,600lbs.

A-7

RECEIVER HITCHESR

EC

EIV

ER

HIT

CH

ES

www.cequentgroup.com ©2011CequentPerformanceProducts,Inc.P/N98929-2012Rev.A.11/11for2012

soldseparatelysoldseparately

HIDDEN HITCH - FEATURES AND bENEFITS

• Lowprofiledesigntocomplimenttherearcontoursandaerodynamicstylingoftoday’svehicles

• Removabledrawbarsandballmountsenhancetheappearanceofthevehiclewhennotinuse

• Customdesignedhitchesarespecifictovehicletypeandmodelyearforsimpleinstallationandsuperiorfit

• Customdesignedhitchesreducecuttingofbumperanddrilling• AllhitchesmeetorexceedV-5andSAEJ684standardsandareinspectedfor

qualityandworkmanship• Backedbyanationwidelimitedlifetimewarranty• Blackpowdercoatfinishovere-coat

NOw yOU SEE IT, NOw yOU DON’T! ONCE INSTALLED THE INVISIbLE HITCH IS COMPLETELy HIDDEN FROM VIEw!

2845128351

CLASS I/II INVISI-HITCH™ PartNo.Series285XX

• 1-1/4”squarereceivertubeopening• Onepiececonstructionforastrongerhitchandeasierinstallation• Directattachmentallowshitchtobeaffixedwellundervehiclefor

minimumvisibilitywhendrawbarisremoved• Includesmountinghardwareandeasytoreadinstructions• Drawbar,accessoryadapter,hitchball,wiringandaccessoriessoldseparately

Maximum Rated CapacityDescription Gross Trailer Wt. Tongue Wt.WeightCarrying Upto3,500lbs. Upto300lbs.

CLASS II PartNo.Series9XXXX

• 1-1/4”squarereceivertubeopening• Onepiececonstructionforastrongerhitchandeasierinstallation• Directattachmentallowshitchtobeaffixedwellundervehicleforminimum

visibilitywhendrawbarisremoved• Comescompletewithremovabledrawbar,pinandclip• Hitchball,wiringandaccessoriessoldseparately

Maximum Rated CapacityDescription Gross Trailer Wt. Tongue Wt.WeightCarrying Upto3,500lbs. Upto300lbs.

CLASS I PartNo.Series6XXXX

• Sleekdesignbuilttoenhancetherearcontourofthevehiclein1-1/4”squaredrawbar

• Comescompletewithremovabledrawbar,pinandclip• Hitchball,wiringandaccessoriessoldseparately• Contouredroundtubedesignwhereappropriate

Maximum Rated CapacityDescription Gross Trailer Wt. Tongue Wt.WeightCarrying Upto2,000lbs. Upto200lbs.

A-8

RECEIVER HITCHES

www.cequentgroup.com ©2011CequentPerformanceProducts,Inc.P/N98929-2012Rev.A.11/11for2012

RE

CE

IVE

R H

ITC

HE

S

CLASS III/IV SERIES PartNo.Series7XXXX,825XX,87XXX

• 2”squarereceivertubeopening• Includesmountinghardwareandeasytoreadinstructions• Ballmountsoldseparatelyon825XX• Ballmount,hitchball,wiringandaccessoriessoldseparately• J-Pin®ready(Onlyonnewhitchdesigns)• 7XXXX&87XXXballmounts#127and#139areavailable

(ReceiverPlusProgram)

Maximum Rated CapacityDescription Gross Trailer Wt. Tongue Wt.WeightCarrying Upto8,000lbs. Upto1,200lbs.WeightDistributing Upto12,000lbs. Upto1,200lbs.

CLASS III/IV UNIVERSAL MULTI-FIT RECEIVER• SHIPPEDINRETAILCARTON• Upto6,000lbs./600lbs.WC-10,000lbs./1,000lbs.WD• Designedtofitawiderangeofpick-uptrucks• Includeshitchreceivercover,mountinghardwareandeasytoreadinstructions• Ballmount,hitchball,wiringandaccessoriessoldseparately

Part no. Description

82000 ClassIII/IVMulti-FitReceiver

HitcH / Accessory - rAting guideScanthisbarcodewithyourmobilephonetoaccess:www.cequentgroup.com/accessrating.asp

qUICk DEFINITIONSGTW=GrossTrailerWeight...WeightofthetrailerfullyloadedTW=TongueWeight...WeightexertedbythetrailercoupleronthehitchballWC=WeightCarrying...TowratingcapacityofahitchwithoutaweightdistributingsystemWD=WeightDistributing...Towratingcapacityofahitchwhenusingaweightdistributingsystem

A-9

RECEIVER HITCHESR

EC

EIV

ER

HIT

CH

ES

www.cequentgroup.com ©2011CequentPerformanceProducts,Inc.P/N98929-2012Rev.A.11/11for2012

qUICk DEFINITIONSGTW=GrossTrailerWeight...WeightofthetrailerfullyloadedTW=TongueWeight...WeightexertedbythetrailercoupleronthehitchballWC=WeightCarrying...TowratingcapacityofahitchwithoutaweightdistributingsystemWD=WeightDistributing...Towratingcapacityofahitchwhenusingaweightdistributingsystem

CLASS III/IV PROFESSIONAL RECEIVERS PartNo.Series33XXX,44XXX

• 2”squarereceivertubeopening• Roundtubedesignsavailableonsomemodels• Includesdistinctivepatentedcollarandplug• Ballmount,pin&clipsoldseparately• Manyapplicationsare“nodrill”forfastandeasyinstallation

• Blackpowdercoatfinishovere-coat

Maximum Rated CapacityDescription Gross Trailer Wt. Tongue Wt.

WeightCarrying Upto8,000lbs. Upto1,200lbs.WeightDistributing Upto12,000lbs. Upto1,200lbs.

CLASS III/IV PREMIUM RECEIVERS PartNo.Series35XXX,36XXX,37XXX

• 2”squarereceivertubeopening• Roundtubedesignsavailableonsomemodels• Boxedforeasyshipping• Includesdistinctivepatentedcollarandplug• Ballmount,pin&clipsoldseparately• Designedforagreatcustomfit• Manyapplicationsare“nodrill”forfastandeasyinstallation

• Blackpowdercoatfinishovere-coat

Maximum Rated CapacityDescription Gross Trailer Wt. Tongue Wt.

WeightCarrying Upto7,500lbs. Upto750lbs.WeightDistributing Upto12,000lbs. Upto1,200lbs.

REESE gIVES yOU TOP qUALITy IN EVERy HITCH AND RECEIVER wE MAkE:

• Solidall-weldedconstructionformaximumstrengthandsafety• Custombuiltaccordingtomanufacturer&modelyeartoensureperfectfitand

toptowingperformance• Computer-aideddesignandfatiguestresstestingensureastrongdesignthat

willwithstandroadabusewithinspecifiedcapacities• AllhitchesmeetorexceedV-5andSAEJ684standardsandareinspectedfor

qualityandworkmanship• Backedbyanationwidelimitedlifetimewarranty• Blackpowdercoatfinishovere-coat

A-10

RECEIVER HITCHES

www.cequentgroup.com ©2011CequentPerformanceProducts,Inc.P/N98929-2012Rev.A.11/11for2012

RE

CE

IVE

R H

ITC

HE

S

CLASS III/IV MULTI-FIT RECEIVERS PartNo.37034,37051,37069,37152

• 2”squarereceivertubeopening• 4hitchmodelsfitfull-sizepick-uptrucks,SUVsandfull-sizevans,andlightpick-

uptrucks• 37034&37051featuresacontemporaryroundtubedesign• Boxedforeasyshipping• Includesdistinctivepatentedcollarandplug• Ballmount,pin&clipsoldseparately• Blackpowdercoatfinishovere-coat

• Limited3yearwarranty

Maximum Rated CapacityDescription Gross Trailer Wt. Tongue Wt.WeightCarrying Upto7,000lbs. Upto700lbs.WeightDistributing Upto12,000lbs. Upto1,200lbs.

See page A-11 for accessories for the titan Receivers

CLASS V TITAN® RECEIVERS PartNo.Series45XXX

• 2-1⁄2”squarereceivertubeopening• Designedforfull-sizelongwheelbasetrucks,vansandutilityvehicleswithfull

framesandheavy-dutysuspensions• Idealforhightongueweightapplications(ToyHauler&Commercial)• Strong,secureheavy-dutysidebracketdesign• Allframeattachments• Pin,clipandreceivertubecoverincluded• Weldedelectricalbracketincluded

Maximum Rated CapacityDescription Gross Trailer Wt. Tongue Wt.WeightCarrying Upto18,000lbs. Upto2,000lbs.WeightDistributing Upto18,000lbs. Upto2,500lbs.

HitcH / Accessory - rAting guideScanthisbarcodewithyourmobilephonetoaccess:www.cequentgroup.com/accessrating.asp

A-11

RE

CE

IVE

R H

ITC

HE

S

www.cequentgroup.com ©2011CequentPerformanceProducts,Inc.P/N98929-2012Rev.A.11/11for2012

TITAn® & ACCESSORIES

All hitch balls built with wrench flats

45325

4512245322

CLASS V TITAN® RECEIVERS PartNo.Series45XXX

• Large2-1/2”squarereceiveropeningallowsforlargercapabilities• Designedforheavydutyusewith3/4&1-tonvehiclesonly• Fitsmostfull-sizepickupsandSUVs• Designedtofitwithstandardfactorystepbumper• Idealforhightongueweightapplications(ToyHauler&Commercial)

Maximum Rated CapacityDescription Gross Trailer Wt. Tongue Wt.WeightCarrying Upto18,000lbs. Upto2,000lbs.WeightDistributing Upto18,000lbs. Upto2,500lbs.

45292

58102

TITAN® wEIgHT DISTRIbUTINg TRUNNION STyLE• TrunnionstyleWDkitwithintegratedcamsforusewithDualCamSwayControl• PerfectforusewithhorsetrailersandRV’swithheavy tongueweights,great

foragricultural,marineandrecreationaluse• Adjustablehitchbarsoldseparately

Part no. Description Gross Trailer Wt. Tongue Wt.

66006 WeightDistibutingHitch 17,000lbs. 1,700Use Shank #54976 or #54977

TITAN® RECEIVER EXTENSIONS• Idealforslide-outcamperswithextendedoverhangs• 2”openingforusew/standardballmounts&hitch-mountedaccessories• ForusewithTitan®receiversonly• Integratedelectricalbracketattached

Part no. Description Length WC(lbs.) WD(lbs.)

45292 ReceiverExtension 24” 6,000 8,00034” 4,500 6,000

45018 ReceiverExtension 41” 5,000 7,50048” 4,000 6,000

TITAN® HITCH bALLSBall Shank Shank Drawbar GTWDia. Finish Dia. Length Thickness GVWRA Zinc Chrome B C Range Rating

2-5/16” - 63836 1-1/4” 2-3/4” 3⁄8”-1” 14,0002-5/16” - 63840 1-1/4” 2-3/4” 3/8”-1” 20,000

TITAN® bALL MOUNTS• 2-1/2”squareshankforuseexclusivelywithTitan®receivers

Rating Ball(lbs.) hole A B C

Part no. GTW/TW Size Length Rise Drop Style

45122 14,000/1,400 1-1/4” 9-1/2” 1-1⁄2” 3” 345123 13,000/1,300 1-1/4” 10” 3-1/2” 5” 345291 13,000/1,300 1-1/4” 10-1/2” - 7-3/4” 345322 18,000/2,000 1-1/4” 10” 1-1/2” 3” 345323 18,000/2,000 1-1/4” 10” 3-1/2” 5” 3

Part no. Description Rating (lbs.)GTW/TW

ShankLength

BallSize

45325 Titan®Tri-BallMount,HollowShank,BlackBalls

2,000/20010,000/1,00014,000/1,400

8-3/4”8-3/4”7-1/2”

1-7/8”2”

2-5/16”

TITAN® REDUCER SLEEVE• Reduces2-1/2”Titan®receiverto2”openingforhitch-mountedaccessories

Part no. Description

58102 Titan®ReducerSleevefrom2-1/2”to2”

A-12www.cequentgroup.com ©2011CequentPerformanceProducts,Inc.P/N98929-2012Rev.A.11/11for2012

RE

CE

IVE

R H

ITC

HE

S

SUpER TITAn® & ACCESSORIES

SUPER TITAn BALL MoUnT (InCLUDED)

SUPER TITAn BALL MoUnT (InCLUDED)

SUPER TITAN® 4000 - 25k• Large3”squarereceiveropening• Ratedfor25,000lbs.weightcarrycapacity;4,000lbs.tongueweight• Dualstackedreceivertubesforproperheightadjustments• Twoelectricalplugandairbrakehookupmountinglocations

foreasytrailerattachments• Forframewidthsfrom34”to34-1/2”• Airbrakefittingsforeasytrailerhookups• 2-5/16”ballandballmountincluded• Pin&clipincluded

Note: 38124 is 14-1/2” from bottom of frame to bottom of dual stacked receiver tube Note: 38208 is 10-1/2” from bottom of frame to bottom of dual stacked receiv-er tube

Part no. Description

38124 SuperTitan®400025KWeld-OnReceiverw/3”Sq.BallMount&2-5/16”Ball,Includes3/4”Pin&Clip

38208 SuperTitan®400025KBolt-OnReceiverw/3”Sq.DualBallMount,2”&2-5/16”Balls,Includes3/4”Pin&Clip

SUPER TITAN® 3000 - 20k• Large3”squarereceiveropening• 20,000lbs.weightcarrycapacity;3,000lbs.tongueweight• Adjustablecrosstubeforproperheight• Twoelectricalplugandairbrakehookupmountinglocations

foreasytrailerattachments• Airbrakehookuplocations• 2-5/16”ballandballmountincluded• Pin&clipincluded• Forframewidthsfrom33-1/2”to34-1/2”• Weldstoframeofvehicle

Note: 38023 is 10” from bottom of frame to bottom of receiver tube Note: 38211 is 14-1/2” from bottom of frame to bottom of receiver tube

Part no. Description

38023 SuperTitan®300020KWeld-OnReceiverw/3”Sq.BallMount&2-5/16”Ball,Includes3/4”Pin&Clip

38211 SuperTitan®300020KWeld-OnReceiverw/3”Sq.BallMount&2-5/16”Ball,Includes3/4”Pin&Clip

SUPER TITAN® DUAL bALL MOUNT• For3”squarereceivers•9”Length• Includes2”(17,000lbs.)&2-5/16”(25,000lbs.)hitchballs

Part no. Description

38180 SuperTitan®DualBallMount

SUPER TITAN® ACCESSORIESPart no. Description

58388 SuperTitan®3/4”HitchPinandClipfor3”Square38735 SuperTitan®ReducerSleevefrom3”to2”

SUPER TITAN® PINTLE HOOk MOUNT• Designedfor3”receivers• Converts3”receiversforusewithpintle-typetrailers,quicklyandeasily• Providesmountingforbothballandcombopintlehooks• Pinandclipmustbeorderedseparately(3/4”hitchpindiameterrequired)

Part no. Description

38186 SuperTitan®PintleHookMount,25,000lbs.capacity

38180

38023

38124

38211

38186

58388

38208

38735

A-13

RE

CE

IVE

R H

ITC

HE

S

www.cequentgroup.com ©2011CequentPerformanceProducts,Inc.P/N98929-2012Rev.A.11/11for2012

pRO SERIES™ RECEIVER HITCHES

qUICk DEFINITIONSGTW=GrossTrailerWeight...WeightofthetrailerfullyloadedTW=TongueWeight...WeightexertedbythetrailercoupleronthehitchballWC=WeightCarrying...TowratingcapacityofahitchwithoutaweightdistributingsystemWD=WeightDistributing...Towratingcapacityofahitchwhenusingaweightdistributingsystem

PRO SERIES™ RECEIVER HITCHES• Solidall-weldedconstructionformaximumstrengthandsafety• Custombuiltaccordingtomanufacturer&modelyearto

ensureperfectfitandtoptowingperformance• Computer-aideddesignandfatiguestresstestingensureastrongdesignthat

willwithstandroadabusewithinspecifiedcapacities• AllhitchesmeetorexceedV-5andSAEJ684standardsandareinspectedfor

qualityandworkmanship• Backedbyanationwide3-yearlimitedwarranty• Blackpowdercoatfinishovere-coat

CLASS I RECEIVERS PartNo.Series51XXX

• 1-1⁄4”squarereceivertubeopening• EconomicalClassIreceiverstylehitch• Comescompletewithremovabledrawbar,pinandclip• Attachestovehicleframeand/orbumper• Blackpowdercoatfinishovere-coat

Maximum Rated CapacityDescription Gross Trailer Wt. Tongue Wt.WeightCarrying Upto2,000lbs. Upto200lbs.

CLASS III/IV SqUARE & ROUND TUbE RECEIVERS PartNo.Series51XXX

• 2”squarereceivertubeopening• ProSeries™receiversaredesignedforcustomerswithtrucks,vansandsport

utilityvehicles• Designedfortoday’sstylishsportutilityvehicles,roundtubereceiverscomple-

mentvehicleappearance• Allframeattachments• J-Pin®ready

• Blackpowdercoatfinishovere-coat

Maximum Rated CapacityDescription Gross Trailer Wt. Tongue Wt.WeightCarrying Upto6,000lbs. Upto600lbs.WeightDistributing Upto10,500lbs. Upto1,050lbs.

CLASS II RECEIVERS PartNo.Series51XXX

• 1-1⁄4”squarereceivertubeopening• Receiverstylehitchwithremovabledrawbar• Comescompletewithremovabledrawbar,pinandclip• Neatappearanceandallframeattachments• Blackpowdercoatfinishovere-coat

Maximum Rated CapacityDescription Gross Trailer Wt. Tongue Wt.WeightCarrying Upto3,500lbs. Upto300lbs.

A-14www.cequentgroup.com ©2011CequentPerformanceProducts,Inc.P/N98929-2012Rev.A.11/11for2012

RE

CE

IVE

R H

ITC

HE

S

MOTORHOME HITCHES

36010

MOTORHOME CLASS III RECEIVER• Featuresadjustablebracketstofitdifferentframewidths• IdealforClassA&ClassCmotorhomes• 2”hitchboxopening

Part no. Description

36010 5,000WC,universalupto46”wide

STEP bUMPER HITCHES• DonotexceedmaximumGTWofbumperorhitch• Nottobeusedwithweightdistributingsystems• Mayrequiremodificationoradditionalspacersforinstallation

onlatemodelpick-ups

Part no. Description

81378 ClassIIStepBumperandReceiverHitchnotforusewithweightdistributingequipment

ROLLPAN

1 2 3 4 5

CLASS III ROLL PAN RECEIVERS PartNo.Series8257X

• Upto5,000lbs./500lbs.WC-7,500lbs./750lbs.WD•Designedtofitlatemodelpick-uptruckswithfactoryclose-outpanelsorafter-

marketrollpans•Mayrequirecuttingoftherollpan•Mayrequireuseofaflip-downlicenseplatebracket-notincluded•Includesmountinghardwareandeasytoreadinstructions

Part no. Year

Roll ThroughPan o.E.M. or License Plate Spare tire May Be Retained

Application Style Aftermarket or Below Under Vehicle Except

82574 88-00 Chevy/GMCFullSizePickupOldBodyStyle

1 Aftermarket Through P245/75R16,P265/75R16onshortboxmodelsonly

82575 99-05 Chevy/GMCNewBodyStyle 1 Aftermarket Through P245/75R16onshortboxmodelsonly82571 83-04 Chevy/GMCS-10,S-15,Sonoma 2 OEM Through Allonshortboxonly

81378

82200

5350

MULTI-FIT MOTORHOME HITCH• 2”receivertubeacceptsallstandardutilityballmounts,providingballheight

adjustmentforleveltowing• Simplethree-piececonstructionmakesassemblyandinstallationfastandeasy• Attachmenthardwareincluded• J-Pin®ready• Blackpowdercoatfinishovere-coat

Part no. Description

5350 MotorhomeHitch,Adjusts24”-46”wide6,000/750lbs.WD–5,000/500lbs.WC

82574

UNIVERSAL MOTORHOME HITCH• Framebracketsareadjustable

Part no. Description

82200 MotorhomeHitch,Adjusts31”-46”wide6,000/750lbs.WD–5,000/500lbs.WC82201 MotorhomeHitch,Adjusts47”-71”wide3,500/300lbs.WC

A-15

RE

CE

IVE

R H

ITC

HE

S

www.cequentgroup.com ©2011CequentPerformanceProducts,Inc.P/N98929-2012Rev.A.11/11for2012

FROnT MOUnTED RECEIVERS & ACCESSORIES

FRONT MOUNTED RECEIVERS PartNo.Series65XXX

• Upto9,000lbs.LinePull/500lbs.TW• 2”squarereceivertubeopening• Frontmountedreceiversofferasecureandusefulattachmentpoint• Allframeattachments• J-Pin®ready• Blackpowdercoatfinishovere-coat

wINCH ADAPTEROurfrontmountedreceiversareratedfor9,000lbs.linepull.Thismakesthemidealforusewithwinches.Weofferawinchadapterthatconnectsthewinchtothereceiver.TheyacceptmostmodelsofSuperwinch,RamseyandWarn.WillnotfitwithS-4500Superwinch.

Part no. Description

6495 WinchMountingPlate6980 HandleKitfor#6495WinchMountingPlate

SPARE TIRE CARRIERThesparetirecarrierisidealforrelocatingsparetirestothefrontofthevehicleusingafrontmountedreceiver.Ithasauniversalboltpatternformountingavarietyoftiresizes.

Part no. Description

6715 SpareTireCarrier

wORk STEPTheworkstepisusefulforgainingaccesstoenginecompartment,particularlywith4WDvehicles.CanalsobeusedonrearClassIII/IVreceivers.

Part no. Description

6758 WorkStep

LICENSE PLATE ADAPTERSomeStatesandProvincesrequireafrontlicenseplate.Thelicenseplateadapteroffersasimplesolutionwherethefronthitchinterfereswiththeplate.

Part no. Description

5443 LicensePlateAdapter

FOLD DOwN LICENSE PLATE HOLDERPart no. Description

49802 FoldDownLicensePlateHolder

RECEIVER TUbE SkID SHIELDOffroadenthusiastsknowwhatthisoneisfor.Itisrecommendedforusewithreceiversthataremountedbelowthebumper.

Part no. Description

6771 ReceiverTubeSkidShield

6758

6980

49802

6495

6715

5443

6771

A-16www.cequentgroup.com ©2011CequentPerformanceProducts,Inc.P/N98929-2012Rev.A.11/11for2012

RE

CE

IVE

R H

ITC

HE

S

FABRICATIOn pARTS

1962

4234

COMbO bARS - UNPAINTEDDesignedforuseinfabricatingundercarreceiverhitcheswhenareceiverisnotavailable.• Madeofcoldformedstructuraltubing• Sizedandpunchedtofitallcommonweightdistributinghitchballmountsor

utilityballmounts

Part no. Length Dia. Ring

2850 6” 2”x2” Standard11081 8” 2”x2” Standard2851 12” 2”x2” Standard2898 18” 2”x2” Standard2852 24” 2”x2” Standard2853 36” 2”x2” Standard2854 48” 2”x2” Standard3006 6” 1-1/4”x1-1/4” Standard5691 12” 2”x2” Cast5692 18” 2”x2” Cast11029 18” 2-1/2”x2-1/2” Cast

COMbO bARS - PAINTEDPart no. Length Dia. Ring

80806 6” 2”x2” Standard80812 12” 2”x2” Standard80818 18” 2”x2” Standard

FASTENERS• BulkPackaged

Part no. Description

1591 FastenerAssortment(Hexbolts,blocks,etc...)49803 FastenerAssortment(Carriagebolts,blocks,etc...)

SAFETy CHAIN LOOPSPart no. Description

4234 2,000lbs.ClassISafetyChainLoop1962 5,000lbs.ClassII/IIISafetyChainLoop34141 10,000lbs.ClassIVSafetyChainLoop

49803

34141

80806

80812

80818

11029

5692

3006