Drainage and Sewage Wastewater collection and transport 13state-of-the-art (DIN 31051/DIN-EN 13306)....

3

ContentsDrainage and Sewage

] = supply availability, L = stock article, C = order-specific production approx. 2 weeks, K = order-specific production approx. 4 weeks, A = delivery time on requestSubject to change - prices do not include VAT. Our General Terms of Delivery and Service apply (see www.wilo.com) - valid from 1 October 2011.

Hei

zung

, Klim

a, K

älte

Was

serv

erso

rgun

gA

bwas

ser

Scha

lt-

und

Rege

lger

äte/

Pum

penm

anag

emen

tW

asse

rver

sorg

ung

Wastewater collection and transport 13

Submersible drainage pumps

Wilo-Drain TM/TMR/TMW 32 13

Wilo-Drain TS/TSW 32 14

Wilo-Drain TS 40-65 16

Wilo-EMU KS 20

Self-priming drainage pumps

Wilo-Drain LP 24

Wilo-Drain LPC 26

Drainage pumps for hot water

Wilo-Drain TMT/TMC 29

Wilo-Drain VC 32

Submersible sewage pumps with macerator Wilo-Drain MTC 34

Wilo-Drain MTS 41

Submersible sewage pumps

Wilo-Drain TC 40 47

Wilo-Drain STS 40 50

Wilo-Drain STS 65 53

Wilo-Drain TP 50/65 59

Wilo-EMU FA (standard article) 66

Wilo-Drain TP 80/100 76

Wilo-Drain TP ...-AM 83

Wastewater lifting units

Wilo-DrainLift TMP 32 84

Wilo-DrainLift TMP 40 85

Wilo-DrainLift Box 86

Sewage lifting units

Wilo-DrainLift KH 87

Wilo-DrainLift XS-F 88

Wilo-DrainLift S 89

Wilo-DrainLift M 91

Wilo-DrainLift L 93

Wilo-DrainLift XL 95

Wilo-DrainLift XXL 97

Wilo-DrainLift FTS 99

4

ContentsDrainage and Sewage

] = supply availability, L = stock article, C = order-specific production approx. 2 weeks, K = order-specific production approx. 4 weeks, A = delivery time on requestSubject to change - prices do not include VAT. Our General Terms of Delivery and Service apply (see www.wilo.com) - valid from 1 October 2011.

Pumps stations

Wilo-DrainLift WS 40 Basic 101

Wilo-DrainLift WS 40-50 103

Wilo-DrainLift WS 625 105

Wilo-DrainLift WS 900 / 1100 108

Accessories Electrical accessories 111

5

Price groups and supply availabilityPrice group key and supply availability

Subject to change - prices do not include VAT. Our General Terms of Delivery and Service apply (see www.wilo.com) - valid from 1 October 2011.

Price group W0 Price group W1 Price group W2 Price group W3

All small screw-end pumpsAll Star pump types: Star-RS, Star-Z NOVA,Star-RSD, Star-Z 15TT up to Z 25/6, Star-ST, Star-RSG, Star-ZD, Smart

High-efficiency pumps, elec-tronically controlled flange-end pumps and big screw-end pumpsStratos, Stratos-D, Stratos-Z, Stratos-ZD, spare motors for above-mentioned pumps Yonos PICO, Stratos PICO, Stratos ECO-BMS, Stratos ECO-Z, Stratos ECO-ST, spare motors for TOP-E, TOP-ED and TOP-EV

Standard flange-end and big screw-end pumpsTOP-S, TOP-SD, TOP-D, TOP-Z, spare motors for above-men-tioned pumps, spare motors for RP, P, DOP

Accessories for pump controlDigiCon-LBF, Protect module, CC-/CCe system, VR-HVAC system, plug-in modules, full motor pro-tection, screwed connections, adapters, capacitors, Wilo-Safe

Price group W4 Price group W5 Price group W6 Price group W7

Glandedhigh-efficiency pumpsVeroLine-IP-E, VeroTwin-DP-E, CronoLine-IL-E, CronoTwin-DL-E, DL-EStandard-PumpenVeroLine-IPL, IP-Z, IPS, VeroLine-IPH-W, IPH-O,VeroTwin-DPL, CronoLine-IL,CronoTwin-DL, CronoBloc-BL, BAC, CronoNorm-NL, NPG,SCP

Water supplyPumps and systems for house and garden, rainwater utilisation, submersible pumps, high-pres-sure centrifugal pumps, acces-sories

Drainage/sewagePumps for wastewater/drainage (except for Wilo-EMU KS – see price group W8), pumps for sewage/faeces (except for Wilo-EMU FA - see price group W8), lifting units for condensate/wastewater/drainage, lifting units for sewage/faeces, syn-thetic pumps stations

System technology sanitary engineeringPressure boosting and fire fight-ing systems, accessories

Price group W8 Price group W9/WD Price group WG Price group WE

Pumps for wastewater:Wilo-EMU KS, sewage/faeces: Wilo-EMU FA

ServiceSpare parts, services, customer service

GeniaxAll components of the decen-tralised pump system Wilo-Geniax

High-efficiency glanded pumpsStratos-GIGA

Supply availability key]=supply availabilityL=normally available ex stockC=components available ex stock, assembly to order within approx. 2 weeksK=components available ex stock, assembly to order within approx. 4 weeksA = delivery time on request

This price list supersedes all previous price documentation which thus become invalid.All product illustrations of respective product series are symbolic presentations only.Effective from 1 October 2011 in Germany.

Article numbers in bold typeThese products were modified or are new.

6 Subject to change - prices do not include VAT. Our General Terms of Delivery and Service apply (see www.wilo.com) - valid from 1 October 2011.

General notes and abbreviations

Abbreviation Meaning

1~ 1-phase current

3~ 3-phase current

blsf Blocking current-proof, no motor protection re-quired

BACnetInternationally defined company-neutral standard for data communication in building automation sys-tems (ISO 16484-5).

CAN

CAN (Controller Area Network) - Multi master bus system, in which several equal CAN-devices may communicate via a 2-core bus within very short cycle times. The Wilo-CAN bus includes a CANopen Stand-ard (EN 50325-4) which is independent of the sup-plier.

DM Three-phase motor, 3~

DN Nominal diameter of the flange connection

Δp Differential pressure

Δp-c Control mode for constant differential pressure

Δp-T Control mode for differential pressure control de-pending on the fluid temperature

Δp-v Control mode for variable differential pressure

ΔT Control mode for differential temperature

EBM Individual run signal

ECM technology

Electronically commutated motor with new wet rotor encapsulation, newly developed glandless drive con-cept for high-efficiency pumps

EM Single-phase motor, 1~

EnEV German Energy Conservation Legislation

ErP

It applies to energy-related products. ErP Directive 2009/125/EC establishing a framework for the set-ting of environmentally-responsible requirements for energy-driven products. Formerly the Ecodesign Directive (EuP Directive 2005/32/EC).

ESM Individual fault signal

Ext. Off “Overriding Off” control input

Ext. Min Control input “Overriding Min”, e. g. for automatic setback operation

FI Residual current-operated protective device

BA Building automation

Geniax-BUS

Master/slave BUS system, specified for the require-ments of the Geniax system, derived from CAN-BUS technology. Up to 252 Geniax components can com-municate with a server with short cycle times via a 2-wire BUS. The Geniax BUS is not compatible with other CAN-BUS systems.

GRD/GLRD Mechanical seal

°dH

Degree of German water hardness; formerly used unit for assessing the water hardness. Is no longer used since the SI-unit mmol/l has been introduced. Con-version: 1 °dH = 0.1783 mmol/l

H Delivery head

IF Interface

Int. MSInternal motor protection: pumps with internal pro-tection against unacceptably high winding tempera-tures

IR Infrared interface

KDS Capacitor

KLF PTC thermistor sensor

Cataphoret-ic coating

Cataphoretic coating (electrophoretically deposited paint, EDP): paintwork with high adhesive strength for long-lasting corrosion protection

KTW Approval for products with plastics, for utilisation in potable water applications

LONLocal Operating Network (open data bus system, standardised and independent of any single manu-facturer, in LONWorks networks)

Modbus

Communication protocol based on a master/slave ar-chitecture. Ethernet and RS485 are used as the media of transmission. Widespread in industrial and building automation applications.

mmol/lMillimols per litre; SI unit for assessing water hard-ness (total hardness, or concentration of alkaline earth ions)

MOT Motor module (drive motor + impeller + terminal box/electronics module) for replacement

P1Power consumption (power supplied from the net-work)

PELV

Protective Extra Low Voltage; PELV (“Protective Extra Low Voltage”, formerly “functional extra low voltage with safe isolation”) provides extra protection from electric shock. The voltage is so low that electrical shock currents are normally not dangerous. However, unlike SELV, active parts and components of the equipment must be earthed and connected with the protective earth conductor.

PLR Pump master computer, Wilo-specific data interface

Q (=) Volume flow

RMOT Spare motor (drive motor + impeller + terminal box/electronics module) for replacement

SELV

Safety Extra Low Voltage; SELV (formerly “safety low voltage”) is a low electrical voltage that offers special protection against electric shocks compared to elec-tric circuits with higher voltages due to the low volt-age level and the insulation. The voltage is so low that electrical shock currents are normally not dan-gerous.

SBM Run signal or collective run signal

SSM Fault signal or collective fault signal

Control in-put, 0 - 10 V Analogue input for external activation of functions

TrinkwV 2001

German Drinking Water Ordinance of 2001 (valid from 01.01.2003)

VDI 2035 VDI guideline for preventing damage in hot-water heating installations

Wilo-Control Building automation management with pumps and accessories

WRAS Water Regulations Advisory Scheme (potable water approval for Great Britain and Northern Ireland)

WSKThermal winding contacts (in motor for monitoring the winding temperature, full motor protection through additional tripping unit)

X Operating mode of double pumps: Individual opera-tion of the respective duty pump


7



Y Operating mode of double pumps: Parallel operation of both pumps

, Number of poles of electric motors: 2-pole motor = approx. 2900 rpm at 50 Hz

. Number of poles of electric motors: 4-pole motor = approx. 1450 rpm at 50 Hz

- Number of poles of electric motors: 6-pole motor = approx. 950 rpm at 50 Hz




Wear and tearPumps or parts of pumps are subject to wear in accordance with the state-of-the-art (DIN 31051/DIN-EN 13306). This wear may vary depending on operating parameters (temperature, pressure, speed, water conditions) and the installation/usage situation and may result in the malfunction or failure at different times of the aforementioned products/components, including their electrical/electronic circuitry.Wearing parts are all components subject to rotary or dynamic stress, including electronic components under tension, in particular:

• Seals (including mechanical seals), seal rings• Stuffing box• Bearings and shafts• Impellers and pump components• Wear rings and counter rings• Stationary wear rings/wear plates• Macerator • Capacitors• Relays/contactors/switches• Electronic circuits, semiconductor components, etc.

Pumps and continuous-flow machines (like submersible mixers and recirculation pumps), as well as their coated components (cata-phoretic, 2K or Ceram coating) are subject to constant wear due to the abrasive fluid contents. For this reason the coating is also count-ed as a wearing part of these units!

We do not accept any liability for faults or defects arising from natu-ral wear and tear.

NoteIn accordance with German Energy Saving Ordinance [Energieein-spar-Verordnung EnEV] as of the 1.2.2002 at boiler outputs from 25 kW, heating pumps are to be equipped with switchgears for auto-matic performance control or electronically controlled pumps are to be installed.In accordance with TrinkwV 2001 and DIN 50930-6, only circulating pumps with corrosion-resistant pump housings made of stainless steel or red brass (CC 499K) are to be utilized in secondary hot water circulation systems.

Pump replacementDetailed information on the subject of “Replacing heating pumps” can be found in the current Wilo replacement guide for heating pumps.

Wilo – General Terms of Delivery and ServiceThe latest version of our General Terms of Delivery and Service can be found on the Internet at

www.wilo.com

Material Meaning AISI

1.4021 Chromium steel X20Cr13 420

1.4034 Chromium steel X46Cr13

1.4057 Chromium steel X17CrNi16-2 431

1.4122 Chromium steel X39CrMo17-1

1.4301 Chromium-nickel steel X5CrNi18-10 304

1.4305 Chromium-nickel steel X8CrNiS18-9 303

1.4306 Chromium-nickel steel X2CrNi19-11 304L

1.4307 Chromium-nickel steel X2CrNi18-9 304L

1.4401 Chromium-nickel-molybdenum steel X5CrNiMo17-12-2 316

1.4408 Chromium-nickel-molybdenum steel GX5CrNiMo19-11-2 316

1.4409 Chrome nickel molybdenum steel X2CrNiMo19-11-2 316

1.4462 Chromium-nickel-molybdenum steel X2CrNiMoN22-5-3

329 (2205)

1.4541 Chromium-nickel steel with titanium addi-tion X6CrNiTi18-10 321

1.4542 Chromium-nickel steel with copper and nio-bium additions X5CrNiCuNb16-4 630

1.4571 Chromium-nickel steel with titanium addi-tion X6CrNiMoTi17-12-2 316Ti

Abrasite Chilled cast iron material for use in strongly abrasive fluids

Al Light metal material (aluminium)

Ceram Coating with very high adhesive strength for long-lasting corrosion protection

Composite High-strength plastic material

EN-GJL

Cast iron with lamellar graphite, also referred to as grey cast iron. The use of grey cast iron in domestic water systems is governed by the Drinking Water Directive 98/83/EC and appli-cable recognised technical rules and stand-ards!

EN-GJS

Cast iron with spheroidal graphite, also re-ferred to as spheroidal cast iron. The use of spheroidal cast iron in domestic water sys-tems is governed by the Drinking Water Di-rective 98/83/EC and applicable recognised technical rules and standards!

G-CuSn10 Zinc-free bronze

GfK Fibreglass plastic

GG See EN-GJL

GJMW Special cast iron: white malleable cast iron (former designation: GTW)

GGG See EN-GJS

Inox Stainless steel

NiAl-Bz Nickel-aluminium bronze

PPO Trade name: Noryl, fibreglass-reinforced plastic

PP-GF30 Polypropylene, reinforced with 30% fibre-glass

PUR Polyurethane

SiC Silicon carbide

St Steel

V2A Material group, e.g. 1.4301, 1.4306 304

V4A Material group, e.g. 1.4404, 1.4571 316

Material Meaning AISI

9

General notesErP (ecological design) guideline


ErP Directive (2009/125/EU)In the year 2005 the European Union passed the new directive 2005/32/EC with requirements for the environmentally sound design of energy-using products. It has become known as the EuP or Eco-Design directive. The abbreviation EuP stands for “energy using products”, and it means that the directive covers all products which consume energy (apart from motor vehicles and public means of transport). On 20th November 2009 it was replaced by the new directive 2009/125/EC. The most important change is that the area of application was widened from “energy-driven products” to “energy-related products”. Accordingly, it is now usually abbreviated as “ErP directive”.Circulation pumps of glandless design and electric motors of glanded pumps are also covered by the ErP directive. In 2009 the EU Commis-sion defined minimum efficiency requirements in two regulations. These go far beyond the requirements of the current energy efficien-cy requirements for glandless pumps or the current best class EFF1 for electric motors. The ordinances will be implemented in several steps in the coming years.

Glandless circulation pumps:The market for glandless pumps especially will be significantly changed by this. After all, until now in many EU countries virtually all models in use have been without speed control. These have an enormous energy consumption, however. In contrast, considerable potential savings and greenhouse gas reductions can be achieved with high-efficiency pumps due to their particularly low electricity consumption. Throughout Europe, the EU Commission Directive could save about half the energy consumption of glandless circulation pumps by the third stage of implementation in 2020 . This amounts to the giant quantity of 23 terawatt hours of energy per year – the energy production of approx. six medium-sized coal-fired power stations. Across Europe, this corresponds to a reduction of CO2 emissions of about 11 million tonnes per year..The yardstick for determining which pump models can continue to be used in future is referred to as the energy efficiency index (EEI). This is calculated using a process defined in the ordinance (EC) 641/2009. The average electrical power of pump is calculated on the basis of a load profile in relation to a reference pump, i.e. an average pump with the same hydraulic output.

Three stages are planned:

In this way, the highly efficient individual pump series Wilo-Stratos and Wilo-Stratos PICO already meet the particularly strict require-ments of the second stage of the ordinance for glandless circulation pumps which is to apply from 2015 onwards. They can thus contri-

bute to increased energy efficiency in heating systems not just from 2013, but immediately!

1. From January 2013, the Energy Efficiency Index (EEI) limit value for glandless circulating pumps installed outside the heat gener-ator (external pumps) will be defined as 0.27. The previous ener-gy efficiency classes will then no longer exist. As a rule, pumps far exceed the minimum efficiency requirements of the current energy efficiency class A. This is why the energy efficiency class-es will be replaced by an EEI marking on the pump.

2. From August 2015, the EEI limit value will be reduced further to 0.23. This will also apply to glandless circulation pumps, designed to operate in newly installed heat generators or solar thermal systems (integrated pumps).

3. In the last implementation stage, the regulations starting from 2020 will also apply for the replacement of integrated pumps in existing heat generators. All glandless circulation pumps in the heating, air-conditioning and solar sectors will be affected . Secondary hot water circulation pumps are an exception to this.

APPLIES TOEUROPEANDIRECTIVEFOR ENERGYRELATEDPRODUCTS


General notesErP (ecological design) guideline

Glanded pumps:An appropriate EU regulation for conventional electric motors has taken effect earlier than the one planned for glandless circulation pumps. It also applies to units installed in glanded pumps for heating, air-conditioning, water supply, pressure boosting and sewage dis-posal. New efficiency classes have been defined against this back-ground.

EFF has become IEFrom 16th June 2011 motorised glanded pumps may be placed on the market only if their motors demonstrate a minimum motor effi-ciency class of IE2. The designation “IE” stands for International Effi-ciency and defines globally applicable efficiency classes for low-volt-age three-phase AC asynchronous motors in the power range from 0.75 to 375 kW. It is based on the new IEC 60034-30:2008 standard. It supersedes the division into three efficiency classes EFF1 to EFF3 which has applied in Europe since 1998.

The following motor efficiency classes have been defined:• IE1 = Standard efficiency, approximately comparable to EFF2• IE2 = High efficiency, approximately comparable to EFF1• IE3 = Premium efficiency• IE4 = Super-premium efficiency (IEC TS 60034-31 Ed.1)

Three stages were defined for the conversion:

Against this background, since 1st January 2011 all glanded pumps supplied by Wilo have been already equipped with IE2 motors. Thus the requirements of the first stage of the ErP Directive have been satisfied ahead of time. The ErP Directive also applies to pressure boosting systems.Therefore for several months, Wilo has for instance been offering for pressure boosting systems the “Helix” range of high-pressure cen-trifugal pumps, which are fitted as standard with IE2 motors. Thus these pumps also already satisfy the requirements of the Directive, which come into effect from mid-2011.The high-efficiency pump series Wilo-Stratos GIGA for the upper performance range in heating, cold-water and cooling applications is a completely new development. For the first time, glanded pumps are driven by EC motors with extremely low current consumption.The motor's energy efficiency is based on the new high-efficiency HED drive concept (HED – High Efficiency Drive) from Wilo and even outclasses the limits of the upcoming efficiency class IE4 (acc. to IEC TS 60034-31 Ed.1) that is set to be the best. In addition, all specifica-tions of the new EU Regulation, which are set to come into force on 16th June 2011, 1st January 2015 or 1st January 2017 under the auspices of the European Ecological Design Directive on the energy efficiency of electric motors, have already been substantially exceed-ed.

1. Efficiency level IE2 must be complied with from 16th June 2011 by all new sales of electric motors on the market – apart from a few design types and applications. Pump motors with the cur-rently established efficiency level EFF2 – which will be called IE1 in the future – may then no longer be sold in the European Union.

2. From 1st January 2015, an even stricter efficiency level IE3 will apply. By this time, motors with a rated output power of 7.5 to 375 kW must reach this level. Alternatively, they must meet effi-ciency level IE2 and be equipped with speed control.

3. From 1st January 2017, these requirements will apply also to motors with a rated output power of 0.75 to 375 kW.

APPLIES TOEUROPEANDIRECTIVEFOR ENERGYRELATEDPRODUCTS

11

Planning guideEEI classifications


Energy efficiency classIn the context of the Kyoto Agreement, European governments in particular are pursuing the goal of drastically reducing CO2 emissions. Energy labelling, particularly for high-consumption household devic-es such as washing machines and refrigerators, is prescribed as an important control element for providing the end consumer with an aid for making decisions in favour of energy-saving appliances.Due to the fact that heating circulation pumps are among the biggest individual electricity consumers in household use because of their long running times, leading European heating pump manufacturers have voluntarily declared their intention of henceforth attaching en-ergy labels to their heating pumps. This makes it possible for users and end consumers to recognise, on the basis of an already familiar classification system, whether a heating circulation pump in use is particularly energy-efficient.The classification of the energy efficiency of heating pumps is carried out by means of a technical measuring procedure, which provides the Energy Efficiency Index, EEI. The smaller the EEI, the less electrical energy the pump consumes and the more favourable the energy classification.

Table: Classification of the Energy Efficiency Index in 7 different energy categories.

The following tables list the corresponding energy class for all heat-ing pumps to be labelled, which is incorporated in the energy label on the packaging. In accordance with the lettering system familiar from household appliances, A is the best possible and G is the worst possi-ble of the energy classes.A comparison of hydraulically similar pumps with different energy classifications reveals that there is a difference of approximately 22% in terms of energy consumption between two sequentially numbered energy classes. Accordingly, an energy class A pump re-quires on average only around 33% of the electrical energy con-sumed by a class D pump.Even though the energy requirements of a class A pump are very high, high-efficiency energy class A pumps have in the meantime be-come available for use throughout the entire performance range from single-family houses to large buildings.

Fig.: Comparison of the energy consumption rates of pumps with the same hydraulic output

Fig.: Energy label for heating circulation pumps,Example: Energy class A

Energy class Energy Efficiency Index

A EEI < 0.4

B 0.4 ≤ EEI < 0.6

C 0.6 ≤ EEI < 0.8

D 0.8 ≤ EEI < 1.0

E 1.0 ≤ EEI < 1.2

F 1.2 ≤ EEI < 1.4

G 1.4 ≤ EEI

0%

20%

40%

60%

80%

100%

120%

140%

160%

180%

A B C D E F G

Energy class

Rela

tive

pow

er c

onsu

mpt

ion


Planning guideVariant key, pump control

Pump controlWhen Wilo pumps are operated with control devices or module ac-cessories, the electrical operating conditions are to be complied with in accordance with VDE 0160.When operating glandless and glanded pumps with brands of fre-quency converters other than those supplied by Wilo, output filters for reducing motor noise and for preventing harmful voltage peaks are to be used and the following limit values are to be complied with:

• Glandless pumps with P2 ≤ 2.2 kW and glanded pumps with P2 ≤ 1.1 kWrate of voltage rise du/dt < 500 V/μsvoltage peaks û < 650 V

• For the noise reduction of glandless pump motors, it is recommended that sine filters (LC filters) are used rather than du/dt filters (RC fil-ters).

• Glanded pumps with P2 > 1.1 kWrate of voltage rise du/dt < 500 V/μsvoltage peaks û < 850 V

Variant key for glanded pumps – valid for variants of the following series: IPL, DPL, IL, DL, IPS, BL, IP-E, DP-E, IL-E, DL-E

Variants Key Meaning

Mechanical seal variantsS1

Q1Q1X4GG for water-glycol mixtures with the following compositions: Glycol proportion of 20 to 40 vol.% and an operating temperature of 40 °C to 120 °C or glycol proportion > 40 to 50 vol.% and an operating temperature of -20 °C to 120 °C (see page 104)

S2 AQ1VGG water-oil emulsions and water with oil components up to 90 °C (see page 104)

Housing variants

H1 EN-GJS-400-18-LT (formerly GGG 40.3) (shot graphite casting or spheroidal cast iron)

H4 Combination flanges PN6/PN10 for IPL; only for IPL 40, IPL 50 (1450 rpm), IPL 40, IPL 50, IPL 65 (2900 rpm)

H5 Max. operating pressure PN 16 (for IPL/DPL and IP_E/DP-E)

Motor variantsK3 Integrated PTC thermistors (3 x, tripping units as accessories)

N Version N with IEC standard motor (only IPL, DPL)

Impeller variants L1 Impeller made of red brass RG = G-CuSn 10

Control variants R1 Electronically controlled pump without sensor (DDG)

13

DrainageSubmersible drainage pumps

] = supply availability, L = stock article, C = order-specific production approx. 2 weeks, K = order-specific production approx. 4 weeks, A = delivery time on request Subject to change - prices do not include VAT. Our General Terms of Delivery and Service apply (see www.wilo.com) - valid from 1 October 2011.

Wilo-Drain TM/TMW/TMR 32

ConstructionBasement drainage pump, water-cooled

Application• For pumping clear or slightly muddy water

- From tanks, sumps or pits- For overflows and flooding- For draining basement stairways and

basement areas

Special features/product advantages• Constantly clean pump sump due to patent-

ed integrated turbulator (TMW)• Minimal residual water level of 2 mm (TMR)• For aggressive fluids (HD version)• With float switch (A version)• Incl. hose connection and 10 m cable

Wilo-Drain TM /TMR /TMW 32

TMW 32/11

TM 32/8TMW 32/8

TMR 32/110

2

4

6

8

10

H[m

]

0 2 4 6 8 10 12 Q[m³/h]

TM 32/7

TMR 32/8

>Accessories Page• Additional electrical accessories and

package solutions . . . . . . . . . . . . . . . . 111

Price group: W6

Wilo-Drain TM/TMW/TMR 32

Pump type Length of connecting cable Nominal motor power Art no.

1~230 V, 50 Hz

P2

m kW ] GBP

TMW 32/8 3 0.37 2043828 L 231.–

TMW 32/11 3 0.55 2043829 L 250.–

TMW 32/11HD 10 0.55 4048715 L 330.–

Price group: W6

Electrical accessories

Type Description Art No.

] GBP

EC-Drain 1x4.0 For single-pump systems up to 4 kW. 2523488 L 376.–

EC-Drain 2x4.0 For double-pump systems up to 2x 4 kW 2533851 L 510.–

EC-Drain 2x4,0-A For double-pump systems up to 2x 4 kW, incl. 2 float switches WA65 with 10 m cable. 2535959 L 763.–

Cable distribution cabinet one part size 00 EC-Drain 1 x 4.0

Including EC-Drain single-pump switchgear 1 x 4.0, distribution board, heating and flashing light. 2533127 C 2 385.–

Float switch WA 65 Signal transmitters for fluids up to a temperature of 60 °C. Switching Up “On”/ down “Off”. Cable length 5 m 503211390 L 60.–

KAS Small alarm switchgear 501534094 L 222.–

AlarmControl 1 Alarm switchgear with mini float switch and shock-proof plug 2522846 L 117.–

AlarmControl 2 Alarm switchgear with mini float switch and interposi-tion shock-proof plug 2522847 L 132.–

Caution: Switchgears are not explosion protected and may be installed only outside of the potentially explosive area.

14



Wilo-Drain TS/TSW 32

ConstructionBasement drainage pump, water-cooled

Application• For pumping clear or slightly muddy water

- From tanks, sumps or pits- For overflows and flooding- For draining basement stairways and

basement areas

- From domestic areas (washing machine water, soapsuds)

- From small fountains, waterworks or streams

Special features/product advantages• Permanent operation 4000 h/year • High-quality motor seal with additional up-

stream dirt deflector• Heavy-duty, impact-resistant stainless

steel housing • Detachable connection cable/float cable• Easy operation and maintenance• Constantly clean pump sump due to patent-

ed integrated turbulator (TSW)

H[m

]Q[m³/h]


0 2 4 6

10

8

6

4

2

08 10 12 14

TS 32/12

TSW 32/11TSW 32/8TS 32/9



Price group: W6


Pump type Length of connecting cable Nominal motor power Art no.

1~230 V, 50 Hz

P2

m kW ] GBP

TS 32/9-A 10 0.3 6043943 L 319.–

TS 32/12-A 10 0.6 6043945 L 286.–

TSW 32/8-A 10 0.3 6045167 L 265.–

TSW 32/11-A 10 0.6 6045166 K 298.–

15




Price group: W6



] GBP






Float switch WA 65 Signal transmitters for fluids up to a temperature of 60 °C. Switching Up “On”/ down “Off”.

Cable length 5 m 503211390 L 60.–



AlarmControl 2 Alarm switchgear with mini float switch and interposition shock-proof plug 2522847 L 132.–


16



Wilo-Drain TS 40-65

ConstructionSubmersible drainage pump

Application• For pumping wastewater with foreign mat-

ter of max. Ø 10 mm for

- Domestic and site drainage- Environmental and water treatment tech-

nology- Industrial and process engineering

Special features/product advantages• Inox and composites• Detachable connection cable• Wide performance range• Internal capacitor (TS 40/1~)• Internal self-switching thermal motor mon-

itoring (TS 40 and TS 50/1~)

Q[m³/h]0 10 20 30 40 50H

[m]

0

4

8

12

16

20

Wilo-DrainTS 40...65

TS 50H133/22

TS 50H122/15 TS 65H117/22 TS 50H111/11

TS 40/10 TS 40/14



Price group: W6

Wilo-Drain TS 40-65

Pump type Nominal motor power

Length of connect-ing cable

Explosion protection

Art no. Explosion protection

Art no.

1~230 V, 50 Hz

3~400 V, 50 Hz

P2

kW m ] GBP ] GBP

TS 40/10 0.4 10 - 2063928 L 291.– – 2063927 L 360.–

TS 40/10-A 0.4 10 – 2063926 L 235.– – – – –

TS 40/14 0.75 10 – 2063931 L 251.– – 2063930 L 387.–

TS 40/14-A 0.75 10 – 2063929 L 390.– – – – –

TS 50 H 111/11 1.1 10 – 4025037 L 891.– : 4025036 L 687.–

TS 50 H 111/11-A 1.1 10 – 4029477 L 786.– – 4029553 L 976.–

TS 50 H 111/11 CEE 1.1 10 – – – – : 6042447 L 919.–

TS 50 H 122/15 1.5 10 – – – – : 4025039 L 997.–

TS 50 H 122/15-A 1.5 10 – – – – – 6042448 L 1 429.–

TS 50 H 122/15 CEE 1.5 10 – – – – : 6042449 L 1 178.–

TS 50 H 133/22 2.2 10 – – – – : 4025042 L 1 030.–

TS 50 H 133/22-A 2.2 10 – – – – – 6042451 L 1 426.–

TS 50 H 133/22 CEE 2.2 10 – – – – : 6042450 L 1 481.–

TS 65 H 117/22 2.2 10 – – – – : 4025059 L 1 041.–

TS 65 H 117/22-A 2.2 10 – – – – – 6042453 L 1 439.–

TS 65 H 117/22 CEE 2.2 10 – – – – : 6042452 L 1 558.–

17



Wilo-Drain TS 40-65

Price group: W6



] GBP






DrainControl PL 1 (0.3-12 A) For single-pump systems, factory setting: level sen-sor 0-1 mWS (4-20 mA) 2522619 L 707.–

Cable distribution cabinet one parts size 00 DrainControl PL 1

Including DrainControl PL1 single-pump switchgear, distribution board, heating and flashing light. 2533128 C 2 612.–

DrainControl PL 2 (0.3-12 A) For double-pump systems, works setting: level sen-sor 0-2.5 mWS (4-20 mA) 2519069 L 1 165.–

Cable distribution cabinet two parts size 0 DrainControl PL 2

Including DrainControl PL2 double-pump switch-gear, distribution board, heating and flashing light. 2533129 C 3 181.–

DrainControl 1 (0.5-10A) DE For single-pump systems; for control of pump via level sensor or float switch 2519930 L 1 385.–

Cable distribution cabinet two parts size 0 DrainControl 1 (0.5-10A) direct starter

Including DrainControl 1 (0.5-10A) single-pump switchgear direct starter, distribution board, heating and flashing light.

2533130 C 3 738.–

DrainControl 2 (0.5-10 A) DE For double-pump systems; for control of pump via level sensor or float switch 2519931 L 1 490.–


Including DrainControl 2 (0.5-10A) double-pump switchgear direct starter, distribution board, heating and flashing light.

2533131 C 3 759.–


Cable length 5 m 503211390 L 60.–

Cable length 10 m 503211893 L 89.–

Cable length 20 m 2004431 L 90.–

Cable length 30 m 2004432 L 124.–


Cable length 5 m 501255297 L 117.–

Cable length 10 m

2005504 L 87.–

Float switch MS1Signal transmitters for aggressive fluids and fluids containing faeces up to a temperature of 80 °C. Switching Up “On”/ down “Off”.

2004593 L 96.–

Ex cut-off relay ER 143Ex cut-off relay for connection of 2 float switches or 3 electrodes, relay in the ISO housing with transpar-ent cover, IP 40

6003269 L 206.–

Ex-rated cut-off relay (2-circuit) For connection of 2 float switches 2513059 L 1 198.–

Ex-rated cut-off relay (3-circuit) For connection of 3 float switches 2510698 L 641.–



Overload relay CM-MSSElectronic overload relay for connection of PTC or bi-metal temperature sensor, with auto-reclosure lock-out and Ex-rated. For switch cabinet installation!

230 V/50...60 Hz 6003277 K 79.–

Electrode relay NIV 105/S Electrode relay for level control device with elec-trodes or float switch. For switch cabinet installation! 230 V/50 Hz 6003270 K 205.–

Relay PS2DFRelay for monitoring the power supply for phase fail-ure, phase asymmetry and undervoltage. For switch cabinet installation!

6003283 L 243.–

Dynamic pressure system For connection to Wilo DrainControl PL 1 or PL 2, hose length 10 m. 2516976 L 111.–

18



Wilo-Drain TS 40-65

Bubbling-through system For connection to Wilo DrainControl PL 1 or PL 2, in conjunction with dynamic pressure system. 2516977 L 352.–

Level sensor 0-1 mWS

Stainless steel housing, protection class IP 68, output signal 4...20 mA, ATEX-approved

Cable length 10 m 2519924 L 394.–

Cable length 30 m 2519925 L 533.–

Cable length 50 m 2519926 L 674.–

Level sensor 0-2.5 mWS

Cable length 10 m 2519921 L 394.–

Cable length 30 m 2519922 L 533.–

Cable length 50 m 2519923 L 674.–


Cable length 20 m 6033106 K 372.–

Cable length 30 m 6033107 L 559.–

Cable length 50 m 6033108 L 563.–

Zener barrier For the use of a level sensor in potentially explosive areas 2519928 L 222.–

Cable clamp For fixation of level sensor 2519927 L 15.–

FEK-DM

CEE phase inverter plug (up to nominal motor power P2 < 4 kW) and rotation direction indicator, without thermal overcurrent protection for motor, with at-tached WA 65 float switch with 10 m cable.

2065238 L 406.–



AlarmControl 2 Alarm switchgear with mini float switch and interpo-sition shock-proof plug 2522847 L 132.–


Price group: W6

Stationary wet well installation

Type Description Art no.

] GBP

Non-return ball valve

Made of EN-GJL-250, with female thread Rp 1½ DN 40 4027330 L 147.–

Made of EN-GJL-250, with female thread Rp 2 DN 50 4027331 L 147.–

Made of EN-GJL-250, with female thread Rp 2½ DN 65 4019225 L 264.–

Shut-off ball valve

Made of brass, nickel-plated, with female thread Rp 1½ DN 40 4027337 L 27.–

Made of brass, nickel-plated, with female thread Rp 2 DN 50 4027338 L 105.–

Made of brass, nickel-plated, with female thread Rp 2½ DN 65 4019227 L 75.–

Price group: W6



] GBP

19



Wilo-Drain TS 40-65

Price group: W6

Portable wet well installation


] GBP

Hose connection

Made of plastic, hose nozzle Ø 40 mm including hose clip, male thread R 1½ DN 40 4027335 L 14.–

Made of plastic, hose nozzle Ø 60 mm including hose clip, male thread R 2 DN 50 4027334 L 17.–

Made of brass, hose nozzle Ø 70 mm including hose clip, male thread R 2 ½ DN 65 4015210 L 54.–

Geka solid coupling Made of brass, with male thread R 1½ DN 40 2018100 L 6.–

Geka hose coupling Made of brass, with hose connector Ø 40 mm, including hose clip DN 40 2018101 L 9.–

Storz pipe couplingMade of aluminium, Storz C connection, with female thread G 2 DN 50 2018102 L 12.–

Made of aluminium, Storz C connection, with female thread G 2½ DN 65 2015234 L 18.–

Storz hose coupling Made of aluminium, Storz C connection, with hose connector Ø 52 mm, in-cluding hose clip DN 50/65 2015235 L 12.–

20



Wilo-EMU KS

ConstructionSubmersible drainage pump

ApplicationFor pumping wastewater with foreign mat-ter of max. Ø 45 mm (depending on the model), for

• Excavation pits, basins and sumps• Flooded basement areas• Use in fountains

Special features/product advantages• Long service life• High operational reliability• Slurping operation possible• Suitable for permanent operation• Easy handling

Q[m³/h]0 50 100 150 200 250 300H

[m]

0

10

20

30

40

50

60

Wilo-EMU KS >Accessories Page• Additional electrical accessories and


Price group: W8

Wilo-EMU KS

Pump type Pressure connec-tion

Pres-sure port

Nominal motor power

Art No. Explo-sion pro-tection


1~230 V, 50 Hz

3~400 V, 50 Hz

P2

kW ] GBP ] GBP

KS 5 Ex D0 G 1¼ Storz C 0.75 – – – – 6030969 : L 1 766.–

KS 8 E G 1¼ Storz C 0.75 6019740 L 1 287.– – – – –

KS 8 ES G 1¼ Storz C 0.75 6019741 L 1 392.– – – – –

KS 8 D G 1¼ Storz C 0.75 – – – – 6019736 – L 1 392.–

KS 8 DS G 1¼ Storz C 0.75 – – – – 6019739 – L 1 392.–

KS 9 E G 1¼ Storz C 0.75 6019745 L 1 352.– – – – –

KS 9 ES G 1¼ Storz C 0.75 6020835 L 1 453.– – – – –

KS 9 D G 1¼ Storz C 0.75 – – – – 6019743 – L 1 352.–

KS 12 E GG G 2 Storz C 1.3 6042086 L 1 508.– – – – –

KS 12 ES GG G 2 Storz C 1.3 6042088 L 1 736.– – – – –

KS 12 D GG G 2 Storz C 1.3 – – – – 6042087 – L 1 508.–

KS 12 DS GG G 2 Storz C 1.3 – – – – 6042089 – L 1 736.–

KS 14 E G 2 Storz C 0.75 6019448 L 1 539.– – – – –

KS 14 ES G 2 Storz C 0.75 6019449 L 1 640.– – – – –

KS 14 D G 2 Storz C 0.75 – – – – 6019447 – L 1 539.–

KS 15 E G 2 Storz C 1.3 6019785 L 1 769.– – – – –

KS 15 ES G 2 Storz C 1.3 6001201 L 1 874.– – – – –

KS 15 D G 2 Storz C 1.3 – – – – 6019450 – L 1 769.–

KS 15 DS G 2 Storz C 1.3 – – – – 6019784 – L 1 874.–

KS 20 D GG G 2½ Storz B 2.2 – – – – 6042090 – L 2 798.–

KS 20 DS GG G 2½ Storz B 2.2 – – – – 6042091 – L 3 023.–

KS 24 D G 3 Storz B 2.4 – – – – 6001204 – L 2 685.–

21



Wilo-EMU KS

KS 24 DS G 3 Storz B 2.4 – – – – 6023360 – L 2 974.–

KS 37ZN D G 4 Storz A 3.7 – – – – 6019732 – L 4 712.–

KS 37ZM D G 4 Storz A 3.7 – – – – 6019731 – L 4 712.–

KS 37ZH D G 4 Storz A 3.7 – – – – 6019730 – L 4 712.–

KS 70ZN D G 4 Storz A 7 – – – – 6021369 – L 5 606.–

KS 70ZM D G 4 Storz A 7 – – – – 6021343 – L 5 606.–

KS 70ZH D G 4 Storz A 7.5 – – – – 6021370 – L 5 606.–

Price group: W6


Type Description Cable length

Art No.

m ] GBP


Cable distribution cabi-net one part size 00 EC-Drain 1 x 4.0





5 503211390 L 60.–

10 503211893 L 89.–

20 2004431 L 90.–

30 2004432 L 124.–


5 501255297 L 117.–

10 2005504 L 87.–

Float switch MS1 Signal transmitters for aggressive fluids and fluids containing fae-ces up to a temperature of 80 °C. Switching Up “On”/ down “Off”. 10 2004593 L 96.–

Price group: W8

Wilo-EMU KS

Pump type Pressure connec-tion

Pres-sure port

Nominal motor power



1~230 V, 50 Hz

3~400 V, 50 Hz

P2

kW ] GBP ] GBP

E Single-phase connectionES single-phase connection + float switchD Three-phase current connectionD0 Three-phase current connection, cable without plugDS Three-phase current connection + float switchDMS Three-phase current connection + motor protection + float switchGG cast ironCeram With Ceram coatingZ centre pressure portH high-pressure impellerM medium-pressure impellerN low-pressure impellerOn request Assembly to order, prices may vary depending on version.

22



Wilo-EMU KS

Overload relay CM-MSSElectronic overload relay for connection of PTC or bimetal tem-perature sensor, with auto-reclosure lockout and Ex-rated. For switch cabinet installation!

6003277 K 79.–

Electrode relay NIV 105/S Electrode relay for level control device with electrodes or float switch. For switch cabinet installation! 6003270 K 205.–

Relay PS2DF Relay for monitoring the power supply for phase failure, phase asymmetry and undervoltage. For switch cabinet installation! 6003283 L 243.–

ZSE Schuko Intermediate float switch, 1~230 V,

5 6017150 L 58.–

10 6017313 L 63.–

20 6021204 L 151.–

ZSD CEE 16 A / 4 kW Intermediate float switch, 3~400 V, 16 A, 4 kW

5 6023412 L 388.–

10 6021206 L 415.–

20 6021205 L 421.–

ZSD CEE 32 A / 7.5 kW Intermediate float switch, 3~400 V, 32 A, 7.5 kW

5 6027185 L 435.–

10 6027184 L 450.–

20 6001283 L 521.–





Price group: W6


Type Description Cable length

Art No.

m ] GBP

Price group: W6

Mechanical accessories


] GBP

Flat suction Suction down to 10 mm, additional level control not possibleKS 8 / KS 9

6032495 L 57.–

Suction strainer extension For filtering coarse contaminants

6032496 L 214.–

KS 14 / KS 15 6032616 L 178.–

Pressure hose / Storz A Synthetic, inside Ø 102 mm, including Storz A coupling, 8/20 bar

5 m 6022391 L 126.–

10 m 6022392 L 244.–

20 m 6022393 L 256.–

Pressure hose / Storz B Synthetic, inside Ø 75 mm, including Storz B coupling, 12/40 bar

5 m 6003052 L 72.–

10 m 6003051 L 129.–

20 m 6003050 L 202.–

Pressure hose / Storz C Synthetic, inside Ø 52 mm, including Storz C coupling, 12/40 bar

5 m 6003651 L 41.–

10 m 6003650 L 59.–

20 m 6003649 L 88.–

Pressure hose / Storz F Synthetic, inside Ø 150 mm, including Storz F coupling, 6/15 bar10 m 6003648 L 432.–

20 m 6003647 L 653.–

Pressure hose / Storz A Plastic spiral hose, inside Ø 102 mm, including Storz A coupling, 3/9 bar

5 m 6022275 L 216.–

10 m 6022276 L 354.–

20 m 6022277 L 631.–

23



Wilo-EMU KS

Pressure hose / Storz B Plastic spiral hose, inside Ø 75 mm, including Storz B coupling, 3.5/10.5 bar

5 m 6022272 L 135.–

10 m 6035187 L 199.–

20 m 6022274 L 392.–

Pressure hose / Storz C Plastic spiral hose, inside Ø 52 mm, including Storz C coupling, 4.5/13.5 bar

5 m 6022269 L 233.–

10 m 6022270 L 375.–

20 m 6022271 L 527.–

Pressure hose / Storz F

Plastic spiral hose, inside Ø 150 mm, including Storz F coupling, 1.8/5.5 bar

5 m6022278 L 743.–

Plastic spiral hose, inside Ø 150 mm, including Storz F coupling, 8/- bar 6044660 L 1 211.–

Storz transition cou-pling

Made of aluminium, Storz F to Storz A 6022279 L 141.–

Made of aluminium, Storz A to Storz B 6003026 L 60.–

Made of aluminium, Storz B to Storz C 6000748 L 29.–

Storz coupling keyFor Storz A, B and C 6022280 L 24.–

For Storz F 6022281 L 31.–

Adapter DN 80 - Rp 3 Made of steel, galvanized, threaded flange DN 80 with female thread Rp 3 DN 80 6003672 L 47.–

Adapter DN 100 - Rp 4 Made of steel, galvanized, threaded flange DN 100 with female thread Rp 4 DN 100 6003669 L 32.–

Adapter DN 150 - Rp 6 Made of steel, galvanized, threaded flange DN 150 with female thread Rp 6 DN 150 on request A On Application

Price group: W6



] GBP

24


DrainageSelf-priming drainage pumps

Wilo-Drain LP

ConstructionSelf-priming drainage pump

ApplicationPumping of wastewater for

• Ponds• Sprinkling / spraying of gardens and green

areas• Mobile drainage

Special features/product advantages• High operational reliability• Easy handling• Easy operation

00 2 4 6 8 10 12

2

4

6

8

10

H[m

]

Wilo-Drain LP

Q[m³/h]



Price group: W6

Wilo-Drain LP

Pump type Pressure connection Screwed connection Nominal motor power Art no.

1~230 V, 50 Hz

Rp P2

kW ] GBP

LP 40/10 DN 40 1½ 0.4 2047645 L 366.–

Price group: W6



] GBP






Connecting cable Including plug and switch Cable length: 5 m 2050436 L 58.–


Cable length 5 m

503211390 L 60.–

Float switch WA 95 Signal transmitters for fluids up to a temperature of 90 °C. Switching Up “On”/ down “Off”. 501255297 L 117.–


6017150 L 58.–


Cable length 20 m 6021204 L 151.–


25



Wilo-Drain LP

Price group: W6



] GBP

Suction kit DN 40

Including 3 m PVC hose, hose connector, 2 hose clips, foot valve and connecting piece 3 m 6042689 L 340.–


Hose connection Made of plastic, hose nozzle Ø 40 mm including hose clip, male thread R 1½

DN 40

4027335 L 14.–

Pipe bend 90° Made of steel, galvanized with female/male thread G 1½ / R 1½ 2083117 L 38.–

Geka solid coupling Made of brass, with male thread R 1½ 2018100 L 6.–

Geka hose coupling Made of brass, with hose connector Ø 40 mm, including hose clip 2018101 L 9.–

Pressure hose Synthetic, inside Ø 42 mm, PN 6, including hose clip

3 m 2027641 L 69.–

5 m 2027642 L 86.–

15 m 2027643 L 182.–

26



Wilo-Drain LPC

ConstructionSelf-priming drainage pump

ApplicationPumping of wastewater with small amounts of solid matter for

• Excavation pits and ponds• Sprinkling / spraying of gardens and green

areas• Drainage of seepage water• Mobile drainage

Special features/product advantages• Long service life• Heavy-duty design• Easy handling• Easy operation• Easy to maintain• Mobile and flexible use

Q[m³/h]0 10 20 30 40 50H

[m]

04

8

12

16

20

24

28

LPC 50/25

LPC 40/19

LPC 80/29

Wilo-DrainLPC...



Price group: W6

Wilo-Drain LPC

Pump type Pressure connection Nominal motor power Art no.

3~400 V, 50 Hz

P2

kW ] GBP

LPC 40/19 R 1½ 1.1 2081686 L 2 149.–

LPC 50/25 Rp 2 2.2 2081660 L 3 158.–

LPC 80/29 R 3 4 2081693 L 3 892.–

27



Wilo-Drain LPC

Price group: W6



] GBP






DrainControl 1 (0.5-10A) DE For single-pump systems; for control of pump via level sensor or float switch

2519930 L 1 385.–

DrainControl 1 (12.5-16 A) SD 2519934 L 2 860.–


Including DrainControl 1 (0.5-10A) single-pump switchgear direct starter, distribution board, heating and flashing light. 2533130 C 3 738.–

DrainControl 2 (0.5-10 A) DE For double-pump systems; for control of pump via level sensor or float switch

2519931 L 1 490.–



Including DrainControl 2 (0.5-10A) double-pump switchgear direct starter, distribution board, heating and flashing light. 2533131 C 3 759.–

Connecting cableType: NSSHÖU; cross-section: 4x1.5 mm2 / per metre 6007632 L 7.–

Type: NSSHÖU; cross-section: 4x2.5 mm2 / per metre 6007639 L 10.–


503211390 L 60.–

503211893 L 89.–

2004431 L 90.–

2004432 L 124.–


501255297 L 117.–

2005504 L 87.–

Electrode relay NIV 105/S Electrode relay for level control device with electrodes or float switch. For switch cabinet installation! 6003270 K 205.–

Relay PS2DF Relay for monitoring the power supply for phase failure, phase asym-metry and undervoltage. For switch cabinet installation! 6003283 L 243.–


6023412 L 388.–

6021206 L 415.–

6021205 L 421.–


6027185 L 435.–

6027184 L 450.–

6001283 L 521.–


28



Wilo-Drain LPC

Price group: W6



] GBP

Suction kit DN 40



Suction kit DN 50

Including 3 m PVC hose, hose connector, 2 hose clips, suction strainer and connecting piece 3 m 6043355 L 349.–


Suction kit DN 80



Hose connection

Hose connector Ø 40 mm including hose clip, female thread Rp 1½ DN 40 2083109 L 41.–

Hose connector Ø 50 mm including hose clip, male thread R 2 DN 50 2083111 L 44.–

Hose connector Ø 90 mm including hose clip, male thread R 3 DN 80 2083112 L 100.–

Pipe bend 90°

Made of steel, galvanized with female/male thread G 1½ / R 1½ DN 40 2083117 L 38.–

Made of steel, galvanized with female/male thread G 2 / R 2 DN 50 2083118 L 47.–

Made of steel, galvanized with female/male thread G 3 / R 3 DN 80 2083119 L 145.–

Geka solid coupling Made of brass, with male thread R 1½DN 40

2018100 L 6.–


Storz pipe couplingMade of aluminium, Storz C connection, with female thread G 2 DN 50 2018102 L 12.–

Made of aluminium, Storz 90 connection, with female thread G 3 DN 80 2017203 L 60.–

Storz hose coupling

Made of aluminium, Storz C connection, with hose connector Ø 52 mm, including hose clip DN 50/65 2015235 L 12.–

Made of aluminium, Storz 90 connection, with hose connector Ø 90 mm, including hose clip DN 80 2017204 L 60.–

Pressure hose

Synthetic, inside Ø 42 mm, PN 6, including hose clip

3 m 2027641 L 69.–

5 m 2027642 L 86.–

15 m 2027643 L 182.–

Synthetic, inside Ø 52 mm, PN 8, including hose clip10 m

2017192 L 138.–

Synthetic, inside Ø 90 mm, PN 8, including 2 hose clips

2017152 L 373.–

20 m 2017193 L 677.–

30 m 2017194 L 975.–

Trolley LPC Trolley kit including mounting accessories 6045543 L 240.–

29

DrainageDrainage pump for hot water


Wilo-Drain TMT/TMC

ConstructionDrainage pumps

ApplicationFor industrial use, e.g. for condensate, hot water and aggressive fluids.

Special features/product advantages• High temperature resistance (up to 95°C)• Also suitable for aggressive fluids

Q[m³/h]0 4 8 12 16 20

H[m

]

0

2

4

6

8

10

12

TMC 40

Wilo-DrainTMT/TMC

TMT 32TMC 32



Price group: W6

Wilo-Drain TMT/TMC

Type Length of connecting cable Nominal motor power Art no.

3~400 V, 50 Hz

P2

m kW ] GBP

TMT H102/7,5Ci 10 0.75 120549093 L 2 044.–

TMC H102/7,5Br 10 0.75 120549299 L 3 465.–

TMC H102/7,5St 10 0.75 120654899 L 10 404.–

30



Wilo-Drain TMT/TMC

Price group: W6



] GBP











Including DrainControl PL2 double-pump switchgear, distribution board, heating and flashing light. 2533129 C 3 181.–

Electrode relay NIV 101/A

Electrode relay for connection of external sealing chamber electrode. In addition the temperature monitoring (bimetal or PTC sensor) can also be con-nected. For switch cabinet installation!

230 V/50...60 Hz 6045175 A 159.–



6003283 L 243.–


Cable length 5 m 503211390 L 60.–

Cable length 10 m 503211893 L 89.–


Cable length 30 m 2004432 L 124.–


Cable length 5 m 501255297 L 117.–

Cable length 10 m

2005504 L 87.–


2004593 L 96.–





Cable length 10 m 2519924 L 394.–

Cable length 30 m 2519925 L 533.–

Cable length 50 m 2519926 L 674.–


Cable length 10 m 2519921 L 394.–

Cable length 30 m 2519922 L 533.–

Cable length 50 m 2519923 L 674.–


Cable length 20 m 6033106 K 372.–

Cable length 30 m 6033107 L 559.–

Cable length 50 m 6033108 L 563.–

31



Wilo-Drain TMT/TMC






Price group: W6



] GBP

32



Wilo-Drain VC

ConstructionVertically-mounted drainage pump (pedes-tal pump with IE2 motor)

ApplicationPumping of wastewater:

• Containing solid substances of max. Ø 5 mm or Ø 7 mm (VC 40)

• Fluids up to 95 °C• From pump sumps• With condensate• From basements at risk of flooding

Special features/product advantages• Long service life• Easy commissioning• Connection outside the fluid• Long downtimes possible• Built-in motor protection by thermal relay

Q[m³/h]0 2 4 6 8 10 12H

[m]

02468

1012141618

Wilo-Drain VC

VC 40/20

VC 32/10



Price group: W6

Wilo-Drain VC


Length of con-necting cable

Art no. Art no.

1~230 V, 50 Hz 3~400 V, 50 Hz

P2

kW m ] GBP ] GBP

VC 32/10 0.37 2044582 L 1 188.– 2044583 L 1 113.–

VC 40/20 2.2 – – – 2044584 L 1 739.–

33



Wilo-Drain VC

Price group: W6



] GBP






DrainControl PL 1 (0.3-12 A) For single-pump systems, factory setting: level sensor 0-1 mWS (4-20 mA) 2522619 L 707.–



DrainControl PL 2 (0.3-12 A) For double-pump systems, works setting: level sensor 0-2.5 mWS (4-20 mA) 2519069 L 1 165.–



Electrode relay NIV 105/S Electrode relay for level control device with electrodes or float switch. For switch cabinet installation! 230 V/50 Hz 6003270 K 205.–


6003283 L 243.–


Cable length 5 m 503211390 L 60.–

Cable length 10 m 503211893 L 89.–


Cable length 30 m 2004432 L 124.–


Cable length 5 m 501255297 L 117.–

Cable length 10 m

2005504 L 87.–


2004593 L 96.–





Cable length 10 m 2519924 L 394.–

Cable length 30 m 2519925 L 533.–

Cable length 50 m 2519926 L 674.–


Cable length 10 m 2519921 L 394.–

Cable length 30 m 2519922 L 533.–

Cable length 50 m 2519923 L 674.–


Cable length 20 m 6033106 K 372.–

Cable length 30 m 6033107 L 559.–

Cable length 50 m 6033108 L 563.–






34


DrainageSubmersible sewage pumps with macerator

Wilo-Drain MTC

ConstructionSubmersible sewage pumps with macerator

ApplicationPumping of sewage containing faeces as well as municipal and industrial sewage, in-cluding long-fibre constituents, for:

• Pressure drainage

• House drainage• Sewage disposal• Water management• Environmental and water treatment tech-

nology

Special features/product advantages• Oil barrier chamber• Mechanical seal on pump side made of solid

silicon carbide material• Hardened macerator• Longitudinally watertight cable

(only MTC 32)• Ex-rated (only MTC 32)

Q[m³/h]0 2 4 6 8 10 12 14 16H

[m]

0

10

20

30

40

50

Wilo-Drain MTC >Accessories Page• Additional electrical accessories and


Price group: W6

Wilo-Drain MTC



Art no. Explo-sion pro-tection

Art no. Explo-sion pro-tection

1~230 V, 50 Hz 3~400 V, 50 Hz

P2

kW m ] GBP ] GBP

MTC 40 F 16.15/7 0.7 10 – – – – 2081261 L 819.–

MTC 40 F 16.15/7-A 0.7 10 2081260 – L 804.– – – – –

MTC 32 F 17.16/20 Ex 2 10 – – – – 6048291 : L 1 405.–

MTC 32 F 22.17/20 Ex 2 10 – – – – 6046395 : L 1 641.–

MTC 32 F 26.17/22 Ex 2.25 10 – – – – 6046396 : L 1 812.–

MTC 32 F 33.17/37 Ex 3.75 10 – – – – 6046397 : L 2 291.–

MTC 32 F 39.16/30 Ex 3.4 10 – – – – 2081262 : L 1 848.–

MTC 32 F 39.16/30 3.4 10 – – – – 2081263 – L 1 641.–

MTC 32 F 49.17/66 Ex 6.6 10 – – – – 2081264 : L 4 537.–

MTC 32 F 49.17/66 6.6 10 – – – – 2081265 – L 4 320.–

MTC 32 F 55.13/66 Ex 6.6 10 – – – – 2081266 : L 4 627.–

MTC 32 F 55.13/66 6.6 10 – – – – 2081267 – L 4 407.–

35



Wilo-Drain MTC

Price group: W6



] GBP

EC-Drain PD 1 (1~230 V/50 Hz) For single-pump systems with AC current connection 2533842 L 511.–

EC-Drain PD 1 (3~400 V/50 Hz)

For single-pump systems with three-phase current connection 2533843 L 511.–


Cable distribution cabinet one parts size 00 DrainCon-trol PL 1








2533130 C 3 738.–

DrainControl 2 (0.5-10 A) DE For double-pump systems; for control of pump via lev-el sensor or float switch 2519931 L 1 490.–



2533131 C 3 759.–

DrainControl 1 (12.5-16 A) SD

For single-pump systems; for control of pump via level sensor or float switch 2519934 L 2 860.–

DrainControl 2 (12.5-16 A) SD

For double-pump systems; for control of pump via lev-el sensor or float switch 2519935 L 3 606.–


Cable length 5 m 503211390 L 60.–

Cable length 10 m 503211893 L 89.–


Cable length 30 m 2004432 L 124.–


Cable length 5 m 501255297 L 117.–

Cable length 10 m

2005504 L 87.–

Float switch MS1Signal transmitters for aggressive fluids and fluids con-taining faeces up to a temperature of 80 °C. Switching Up “On”/ down “Off”.

2004593 L 96.–

Ex cut-off relay ER 143Ex cut-off relay for connection of 2 float switches or 3 electrodes, relay in the ISO housing with transparent cover, IP 40

6003269 L 206.–





36



Wilo-Drain MTC

Overload relay CM-MSSElectronic overload relay for connection of PTC or bi-metal temperature sensor, with auto-reclosure lockout and Ex-rated. For switch cabinet installation!

230 V/50...60 Hz

6003277 K 79.–


Electrode relay for connection of external sealing chamber electrode. In addition the temperature moni-toring (bimetal or PTC sensor) can also be connected. For switch cabinet installation!

6045175 A 159.–

Electrode relay NIV 105/S Electrode relay for level control device with electrodes or float switch. For switch cabinet installation! 230 V/50 Hz 6003270 K 205.–


6003283 L 243.–





Cable length 10 m 2519924 L 394.–

Cable length 30 m 2519925 L 533.–

Cable length 50 m 2519926 L 674.–


Cable length 10 m 2519921 L 394.–

Cable length 30 m 2519922 L 533.–

Cable length 50 m 2519923 L 674.–


Cable length 20 m 6033106 K 372.–

Cable length 30 m 6033107 L 559.–

Cable length 50 m 6033108 L 563.–






Important: Switchgears are not explosion protected and may be installed only outside of the potentially explosive area.

Price group: W6



] GBP

37



Mechanical accessories Wilo Drain MTC 40

1

3

2

1

6

1 Suspension unit2 Non-return valve3 Gate valve6 Chain

Price group: W6



] GBP

Suspension unit DN 40

Made of EN-GJL-250, painted, with free passage in DN 40, foot elbow in-cluding pump holder, profile joint, installation and floor fixation accesso-ries and double-pipe guide pipe bracket Ø ¾" without guide pipes.

DN 40/50 2057179 L 198.–

Non-return ball valve Made of EN-GJL-250, with female thread Rp 1½ DN 40 4027330 L 147.–

Gate valve Made of red brass, coupling sleeve slider with female thread Rp 1½ DN 40 2525301 L 27.–

Chain set PCS-CE As chain sling with 2 shackles in galvanised steel. Lifting capacity: 400 kg5 m 6060663 L 107.–

10 m 6060716 L 282.–

Price group: W6



] GBP


10 m 6060716 L 282.–

Pipe angle 90° MTC 40/MTS 40/31...39

Made of EN-GJMW-400-5, with female/male thread G 1½ / R 1½ includ-ing threaded flange, galvanised steel, with female thread R 1½ and 1 set of mounting accessories

DN 40 2057401 L 71.–

38



Mechanical accessories Wilo Drain MTC 32 F 22...33

DN 32 3

2

4

6

1

1

1 Suspension unit2 Non-return valve3 Gate valve4 Pipe bend6 Chain

Price group: W6



] GBP


Made of EN-GJL-250, with free passage to DN 36, coupling connection and foot without 90° pipe elbow, including profile joint, installation and floor fixation accessories and single-pipe guide pipe bracket Ø 1¼" with-out guide pipe.

DN 50 6031599 L 307.–

Pipe bend 90° MTC 32 F 22...33

Made of steel, galvanized, with female/male thread G 2 / R 2 for suspen-sion unit EHV DN50/1R DN 50 6003089 L 42.–

Non-return ball valve Made of EN-GJL-250, with female thread Rp 2 DN 50 4027331 L 147.–

Shut-off ball valve Made of brass, nickel-plated, with female thread Rp 2 DN 50 4027338 L 105.–


10 m 6060716 L 282.–

39




6

15

4

9

4 Pipe bend6 Chain9 Floor supporting foot15 Pressure hose

Price group: W6



] GBP

Floor supporting foot MTC 32F22...33 Made of steel (S235JR), lacquered, including fixation material 6040150 L 304.–

Pipe bend 90° / Storz CMTC 32F22...33

Made of EN-GJL-250, including Storz C connection, transition flange, in-cluding 1 set of mounting accessories DN 50 6045171 L 96.–

Pressure hose / Storz C Synthetic, inside Ø 52 mm, including Storz C coupling, 12/40 bar 10 m 6003650 L 59.–


10 m 6060716 L 282.–

40




6

3

2

1


Price group: W6



] GBP

Suspension unit Rp 1½

Made of EN-GJL-250, painted, with free passage in DN 40, foot elbow in-cluding pump holder, profile joint, installation and floor fixation accesso-ries and single-pipe guide pipe bracket Ø 1" without guide pipe.

DN 40 2082630 L 512.–

Centre of gravity extension

Shackle adapter with fixation accessories for MTC 32 F 49 and MTC 32 F 55 pumps, 6042181 L 54.–




10 m 6060716 L 282.–

Price group: W6



] GBP

Floor supporting foot MTC 32 F 49...55 Made of steel (S235JR), lacquered, including fixation material

2098296 L 482.–

Floor supporting foot MTC 32 F 39 2098295 L 132.–


10 m 6060716 L 282.–

41



Wilo-Drain MTS

ConstructionSubmersible sewage pumps with macerator

ApplicationPumping of sewage containing faeces as well as municipal and industrial sewage, in-cluding long-fibre constituents, for:

• Pressure drainage• House drainage

• Sewage disposal• Water management• Environmental and water treatment tech-

nology

Special features/product advantages• Spherically formed macerator• High degree of efficiency• Low operating costs

• Resistant to clogging and blockage• Oil barrier chamber• High operational reliability• Corrosion-resistant stainless steel motor in

1.4404 (316 L)• Explosion protection as standard for all

3~400V versions

Q[m³/h]420 86 10 12 14H

[m]

0

5

10

15

20

25

30

35

Wilo-DrainMTS 40

MTS 40/31

MTS 40/24MTS 40/27

MTS 40/21

MTS 40/39

MTS 40/35



Price group: W6

Wilo-Drain MTS


Length of connecting cable

Art no. Art no. Explosion protection

1~230 V, 50 Hz 3~400 V, 50 Hz

P2

kW m ] GBP ] GBP

MTS 40/21 1 10 2060174 L 1 250.– 2060176 : L 1 211.–

MTS 40/24 1.2 10 2060170 L 1 268.– 2060175 : L 1 225.–

MTS 40/27 1.5 10 2053831 L 1 245.– 2056253 : L 1 175.–

MTS 40/31 2.1 10 – – – 6046761 : L 1 250.–

MTS 40/35 2.3 10 – – – 6046760 : L 1 281.–

MTS 40/39 2.5 10 – – – 6045558 : L 1 247.–

42



Wilo-Drain MTS

Price group: W6



] GBP

EC-Drain PD 1 (1~230 V/50 Hz) For single-pump systems with AC current connec-tion 2533842 L 511.–

EC-Drain PD 1 (3~400 V/50 Hz) For single-pump systems with three-phase current connection 2533843 L 511.–



Including DrainControl PL1 single-pump switch-gear, distribution board, heating and flashing light. 2533128 C 2 612.–






Including DrainControl 1 (0.5-10A) single-pump switchgear direct starter, distribution board, heat-ing and flashing light.

2533130 C 3 738.–



Including DrainControl 2 (0.5-10A) double-pump switchgear direct starter, distribution board, heat-ing and flashing light.

2533131 C 3 759.–


Cable length 5 m 503211390 L 60.–

Cable length 10 m 503211893 L 89.–


Cable length 30 m 2004432 L 124.–


Cable length 5 m 501255297 L 117.–

Cable length 10 m

2005504 L 87.–


2004593 L 96.–

Ex cut-off relay ER 143Ex cut-off relay for connection of 2 float switches or 3 electrodes, relay in the ISO housing with trans-parent cover, IP 40

6003269 L 206.–





Overload relay CM-MSS

Electronic overload relay for connection of PTC or bimetal temperature sensor, with auto-reclosure lockout and Ex-rated. For switch cabinet installa-tion!

230 V/50...60 Hz 6003277 K 79.–

Electrode relay NIV 105/SElectrode relay for level control device with elec-trodes or float switch. For switch cabinet installa-tion!

230 V/50 Hz 6003270 K 205.–

43



Wilo-Drain MTS

Relay PS2DFRelay for monitoring the power supply for phase failure, phase asymmetry and undervoltage. For switch cabinet installation!

6003283 L 243.–




Stainless steel housing, protection class IP 68, out-put signal 4...20 mA, ATEX-approved

Cable length 10 m 2519924 L 394.–

Cable length 30 m 2519925 L 533.–

Cable length 50 m 2519926 L 674.–


Cable length 10 m 2519921 L 394.–

Cable length 30 m 2519922 L 533.–

Cable length 50 m 2519923 L 674.–


Cable length 20 m 6033106 K 372.–

Cable length 30 m 6033107 L 559.–

Cable length 50 m 6033108 L 563.–






Important: Switchgears are not explosion protected and may be installed only outside of the potentially explosive area.

Price group: W6



] GBP

44



Mechanical accessories Wilo Drain MTS 40

1

3

2

1

6


Price group: W6

Stationary wet well installation DN 40


] GBP



DN 40/50 2057179 L 198.–




10 m 6060716 L 282.–

45




1

3

2

4

1

8

6

1 Suspension unit2 Non-return valve3 Gate valve4 Pipe bend6 Chain8 Y-piece

Price group: W6



] GBP



DN 40/50 2057179 L 198.–

Non-return valve Made of EN-GJL-250, according to DIN EN 12050-4, including 1 set of mounting accessories, flange DN 50 DN 50 2017166 L 141.–

Gate valve Made of EN-GJL-250, including 1 set of mounting accessories, flange DN 50 DN 50 2017160 L 135.–

Pipe bend 90° Made of EN-GJS-400-15, with 2 flanges, including 1 set of mounting ac-cessories DN 50 2018053 L 130.–


10 m 6060716 L 282.–

Y-piece DN 50 Made of steel, galvanized, flange PN 10/16 according to DIN 2501 with 2 sets of mounting accessories

DN 50/50/50 2019042 L 346.–

46




Price group: W6



] GBP

Chain set PCS-CE As chain sling with 2 shackles in 1.4404 stainless steel. Lifting capacity: 400 kg

5 m 6060658 L 311.–

10 m 6060714 L 600.–

Floor supporting foot MTS 40 Made of steel (S235JR), lacquered, including fixation material 2058721 L 193.–

Pipe angle 90° MTS 40/21...27 Made of EN-GJMW-400-5, with female/male thread G 1¼ / R 1¼ DN 32 2057400 L 46.–

Pipe angle 90° MTC 40/MTS 40/31...39

Made of EN-GJMW-400-5, with female/male thread G 1½ / R 1½ in-cluding threaded flange, galvanised steel, with female thread R 1½ and 1 set of mounting accessories

DN 40 2057401 L 71.–

6

10b

9

10a

6 Chain9 Floor supporting foot MTS10a Pipe bend MTS 40/21...2710b Pipe bend MTS 40/31...39

47

DrainageSubmersible sewage pumps


Wilo-Drain TC 40

ConstructionSubmersible sewage pump

ApplicationPumping of heavily contaminated fluids for:

• House/site drainage

• Sewage disposal (the pumping of sewage containing faeces is not within the scope of DIN EN 12050-1)

• Water management• Environmental and water treatment tech-

nology

Special features/product advantages• Heavy-duty hydraulic housing made of cast

iron• Easy operation due to the attached float

switch• Integrated stainless steel pump base for

easy installation• Free ball passage: 40 mm

H[m

]

Q[m³/h]0

0 2 4 6 8 10 12 14

4

8

10

6

2

Wilo-Drain TC 40

TC 40/8

TC 40/10



Price group: W6

Wilo-Drain TC 40

Pump type Nominal motor power Length of connecting cable Art no.

1~230 V, 50 Hz

P2

kW m ] GBP

TC 40/8 0.5 5 4050131 L 323.–

TC 40/10 0.6 5 4050132 L 240.–

48



Wilo-Drain TC 40

Price group: W6



] GBP













Cable length 5 m503211390 L 60.–








Cable length 10 m 2519924 L 394.–

Cable length 30 m 2519925 L 533.–

Cable length 50 m 2519926 L 674.–


Cable length 10 m 2519921 L 394.–

Cable length 30 m 2519922 L 533.–

Cable length 50 m 2519923 L 674.–


Cable length 20 m 6033106 K 372.–

Cable length 30 m 6033107 L 559.–

Cable length 50 m 6033108 L 563.–


FEK-DM


2065238 L 406.–


230 V/50...60 Hz 6003277 K 79.–


49



Wilo-Drain TC 40


6003283 L 243.–





Price group: W6



] GBP

Price group: W6



] GBP

Non-return ball valve Made of EN-GJL-250, with female thread Rp 1½

DN 40

4027330 L 147.–

Shut-off ball valve Made of brass, nickel-plated, with female thread Rp 1½ 4027337 L 27.–

Hose connection Made of plastic, hose nozzle Ø 40 mm including hose clip, male thread R 1½ 4027335 L 14.–



50



Wilo-Drain STS 40


ApplicationPumping heavily contaminated fluids for

• domestic and site drainage• sewage disposal (pumping of sewage con-

taining faeces not withing the scope of DIN EN 12050-1)


nology• Industrial and process engineering

Special features/product advantages• Detachable connection cable and float

switch

• Attached float switch (A-model) enables easy operation

• Integrated pump base for easy installation• Free ball passage: 40 mm• Integrated thermal motor protection (1~/

3~) and phase failure protection (3~)• Impeller made of stainless steel

H[m

]

0

2

4

6

8

10

Q[m³/h]420 10 12 14 1686

Wilo-Drain STS 40



Price group: W6

Wilo-Drain STS 40




1~230 V, 50 Hz

3~400 V, 50 Hz

P2

kW m ] GBP ] GBP

STS 40/8 0.6 10 2065866 L 266.– 2065870 L 308.–

STS 40/8-A 0.6 10 2065868 L 280.– – – – –

STS 40/10 0.75 10 2065872 L 286.– 2065876 L 328.–

STS 40/10-A 0.75 10 2065874 L 280.– – – – –

51



Wilo-Drain STS 40

Price group: W6



] GBP




















Stainless steel housing, protection class IP 68, out-put signal 4...20 mA, ATEX-approved

Cable length 10 m 2519924 L 394.–

Cable length 30 m 2519925 L 533.–

Cable length 50 m 2519926 L 674.–


Cable length 10 m 2519921 L 394.–

Cable length 30 m 2519922 L 533.–

Cable length 50 m 2519923 L 674.–


Cable length 20 m 6033106 K 372.–

Cable length 30 m 6033107 L 559.–

Cable length 50 m 6033108 L 563.–


FEK-DM


2065238 L 406.–


230 V/50...60 Hz 6003277 K 79.–


52



Wilo-Drain STS 40


6003283 L 243.–





Price group: W6



] GBP

Price group: W6



] GBP

Non-return ball valve Made of EN-GJL-250, with female thread Rp 1½

DN 40

4027330 L 147.–

Shut-off ball valve Made of brass, nickel-plated, with female thread Rp 1½ 4027337 L 27.–

Hose connection Made of plastic, hose nozzle Ø 40 mm including hose clip, male thread R 1½ 4027335 L 14.–


Geka hose coupling Made of brass, with hose connector Ø 40 mm, in-cluding hose clip 2018101 L 9.–

53



Wilo-Drain STS 65


ApplicationPumping of sewage containing faeces (when connected to a pressure pipe, in con-formity with DN80 DIN EN 12050-1) as well as municipal and industrial sewage, includ-ing long-fibre constituents, for:

• domestic and site drainage• Sewage disposal• Water management• Environmental and water treatment tech-

nology

Special features/product advantages• Detachable connection cable• Dry motor, stainless steel version

• Non-susceptible to clogging due to large free ball passage (65 mm)

• Flange connection DN 65 and DN 80• CS version with integrated motor cooling for

dry well installation (STS 65 F ... CS)• Longitudinally watertight cable version (STS

65F…)• ATEX-certified (STS 65F…)

Q[m³/h]0 10 20 30 40 50 60H

[m]

0

4

8

12

16

20

Wilo-DrainSTS 65



Price group: W6

Wilo-Drain STS 65



Art no. Art no.

1~230 V, 50 Hz 3~400 V, 50 Hz

P2

kW m ] GBP ] GBP

STS 65/6 1.5 10 2081900 L 1 250.– 2081901 L 1 201.–

STS 65/10 2.4 10 – – – 6061739 L 1 482.–

STS 65/14 2.8 10 – – – 6061740 L 1 553.–

STS 65/18 3.7 10 – – – 2081905 L 1 504.–

STS 65/22 4 10 – – – 2081906 L 1 417.–

Price group: W6

Wilo-Drain STS 65 F


Length of connecting cable Art no. Explosion protection

3~400 V, 50 Hz

P2

kW m ] GBP

STS 65 F 6.60/19 Ex 1.9 10 2081907 : L 1 622.–

STS 65 F 10.60/24 Ex 2.4 10 2081908 : L 1 689.–

STS 65 F 14.65/28 Ex 2.8 10 6061741 : L 1 686.–

STS 65 F 18.70/37 Ex 3.7 10 2081910 : L 1 680.–

STS 65 F 22.70/40 Ex 4 10 2081911 : L 1 897.–

54



Wilo-Drain STS 65

Price group: W6

Wilo-Drain STS 65 F...CS (with sheath current cooling)

Pump type Nominal motor power Length of connecting cable Art no. Explosion protection

3~400 V, 50 Hz

P2

kW m ] GBP

STS 65 F 6.60/19 CS Ex 1.9 10 2083970 : L 1 818.–

STS 65 F 10.60/24 CS Ex 2.4 10 2082311 : L 1 916.–

STS 65 F 14.65/28 CS Ex 2.8 10 6061742 : L 1 977.–

STS 65 F 18.70/37 CS Ex 3.7 10 2082315 : L 2 294.–

STS 65 F 22.70/40 CS Ex 4 10 2082316 : L 2 273.–

Price group: W6



] GBP



Including EC-Drain single-pump switchgear 1 x 4.0, distribution board, heating and flashing light.

2533127 C 2 385.–





Including DrainControl PL1 single-pump switchgear, distribution board, heating and flashing light.

2533128 C 2 612.–



Including DrainControl PL2 double-pump switchgear, distribution board, heating and flashing light.

2533129 C 3 181.–




2533130 C 3 738.–




2533131 C 3 759.–

Float switch WA 65 Signal transmitters for fluids up to a tempera-ture of 60 °C. Switching Up “On”/ down “Off”.

Cable length 5 m 503211390 L 60.–

Cable length 10 m 503211893 L 89.–


Cable length 30 m 2004432 L 124.–

55



Wilo-Drain STS 65

Float switch WA 95 Signal transmitters for fluids up to a tempera-ture of 90 °C. Switching Up “On”/ down “Off”.

Cable length 5 m 501255297 L 117.–

Cable length 10 m

2005504 L 87.–

Float switch MS1Signal transmitters for aggressive fluids and flu-ids containing faeces up to a temperature of 80 °C. Switching Up “On”/ down “Off”.

2004593 L 96.–

Ex cut-off relay ER 143Ex cut-off relay for connection of 2 float switches or 3 electrodes, relay in the ISO hous-ing with transparent cover, IP 40

6003269 L 206.–






Electronic overload relay for connection of PTC or bimetal temperature sensor, with auto-re-closure lockout and Ex-rated. For switch cabi-net installation!

230 V/50...60 Hz 6003277 K 79.–


6003283 L 243.–


Electrode relay for connection of external seal-ing chamber electrode. In addition the tempera-ture monitoring (bimetal or PTC sensor) can also be connected. For switch cabinet installation!

230 V/50...60 Hz 6045175 A 159.–

Electrode relay NIV 105/SElectrode relay for level control device with electrodes or float switch. For switch cabinet installation!

230 V/50 Hz 6003270 K 205.–





Cable length 10 m 2519924 L 394.–

Cable length 30 m 2519925 L 533.–

Cable length 50 m 2519926 L 674.–


Cable length 10 m 2519921 L 394.–

Cable length 30 m 2519922 L 533.–

Cable length 50 m 2519923 L 674.–


Cable length 20 m 6033106 K 372.–

Cable length 30 m 6033107 L 559.–

Cable length 50 m 6033108 L 563.–

Zener barrier For the use of a level sensor in potentially ex-plosive areas 2519928 L 222.–




AlarmControl 2 Alarm switchgear with mini float switch and in-terposition shock-proof plug 2522847 L 132.–


Price group: W6



] GBP

56



Wilo-Drain STS 65

4

5

3

2

1

6 1 Suspension unit2 Non-return valve3 Gate valve4 Pipe bend5 Mounting accessories6 Chain

Price group: W6



] GBP

Suspension unit DN65/1RK

Made of EN-GJL-250, with free passage in DN 65, foot elbow incl. pump holder, profile joint, single-pipe guide pipe bracket Ø 1" and mounting accessories for sump and floor fixation. Without guide pipe.

DN 65 6063973 L 309.–



Pipe bend 90° Made of EN-GJS-400-15, with 2 flanges, including 1 set of mounting accessories DN 65 2017183 L 169.–


DN 65/65/65 2017178 L 578.–

Mounting accesso-ries DN 65 For one flange connection, with screws, nuts and flat gasket DN 65 2012068 L 6.–

Chain set PCS-CE As chain sling with 2 shackles in galvanised steel. Lifting capacity: 400 kg

5 m 6060663 L 107.–

10 m 6060716 L 282.–

Price group: W6



] GBP

Suspension unit EHV DN80/2RK

Made of EN-GJL-250, painted, with free passage in DN 80, foot elbow including pump holder, profile joint, installation and floor fixation acces-sories and double-pipe guide pipe bracket Ø 1¼" without guide pipes.

DN 80 6036888 L 355.–





DN 80/80/80 2017179 L 707.–



10 m 6060716 L 282.–

57



Wilo-Drain STS 65

6

15

11

15

12

49

11

4

13

14

4 Pipe bend6 Chain9 Floor supporting food11 Adapter12 Hose connection13 Storz pipe coupling14 Storz hose coupling15 Pressure hose

Price group: W6



] GBP

Pipe bend 90° Made of steel, galvanized with female/male thread G 2½ / R 2½ DN 65 4015212 L 64.–


10 m 6060716 L 282.–

Floor supporting foot Made of steel (S235JR), lacquered, including fixation material FA 08.23 6022981 L 340.–

Adapter DN 65 - Rp 2½

Made of steel, galvanized, threaded flange DN 65 with female thread Rp 2½, including 1 set of mounting accessories DN 65 4015204 L 73.–

Hose connection Made of brass, hose nozzle Ø 70 mm including hose clip, male thread R 2½ DN 65 4015210 L 54.–

Pipe bend 90° Made of EN-GJL-250, with hose connector Ø 70 mm, flange on pump side, including 1 set of mounting accessories DN 65 4027346 L 63.–

Pressure hose Synthetic, inside Ø 70 mm, PN 8, including hose clip 10 m 2014151 L 90.–

Price group: W6

Portable wet well installation with Storz coupling DN 65


] GBP


Chain set PCS-CE As chain sling with 2 shackles in galvanised steel. Lifting capacity: 400 kg 5 m 6060663 L 107.–

Chain set PCS-CE As chain sling with 2 shackles in galvanised steel. Lifting capacity: 400 kg 10 m 6060716 L 282.–

Floor supporting foot Made of steel (S235JR), lacquered, including fixation material FA 08.23 6022981 L 340.–

Adapter DN 65 - Rp 2½

Made of steel, galvanized, threaded flange DN 65 with female thread Rp 2½, including 1 set of mounting accessories DN 65 4015204 L 73.–

Storz pipe coupling Made of aluminium, Storz C connection, with female thread G 2½ DN 65 2015234 L 18.–

Storz hose coupling Made of aluminium, Storz C connection, with hose connector Ø 52 mm, including hose clip DN 50/65 2015235 L 12.–


58



Wilo-Drain STS 65

Price group: W6

Stationary vertical dry well installation DN 80


] GBP



Installation kit STS 65 Made of EN-GJL-250, including installation and floor fixation ac-cessories 80 6042234 L 692.–

Compensator DN 80 Made of steel, galvanized / neoprene, length 130 mm, including mounting accessories DN 80 2017189 L 178.–

Y-piece DN 80 Made of steel, galvanized, flange PN 10/16 according to DIN 2501 with 2 sets of mounting accessories DN 80/80/80 2017179 L 707.–

min. min.

2

18183

17

17

2 Non-return valve3 Gate valve17 Installation kit18 Compensator

59



Wilo-Drain TP 50/TP 65


ApplicationPumping of heavily contaminated fluids for:

• domestic and site drainage• Sewage disposal (not within the scope of

DIN EN 12050-1)


nology• Industrial and process engineering

Special features/product advantages• Detachable connection cable

• Dry motor, stainless steel version• ATEX approval (only for TP 65/3~ without

float)• Attached float switch (A-model) enables

easy operation• Low weight• Motor housing optional in 1.4435

Q[m³/h]0 10 20 30 40 50H

[m]

0

4

8

12

16

20

Wilo-DrainTP 50/TP 65



Price group: W6

Wilo-Drain TP 50/TP 65 single-channel impeller



Art no. Art no.

1~230 V, 50 Hz 3~400 V, 50 Hz

P2

kW m ] GBP ] GBP

TP 50 E 101/5,5 0.55 10 4025332 L 476.– 4025331 L 465.–

TP 50 E 101/5,5-A 0.55 10 4029445 L 528.– 4029551 L 745.–

TP 50 E 107/7,5 0.75 10 4025335 L 522.– 4025334 L 508.–

TP 50 E 107/7,5-A 0.75 10 4029452 L 572.– 4029552 L 750.–

Price group: W6

Wilo-Drain TP 50 Vortex impeller



Art no. Art no.

1~230 V, 50 Hz 3~400 V, 50 Hz

P2

kW m ] GBP ] GBP

TP 50 F 82/5,5 0.55 10 4025319 L 470.– 4025318 L 459.–

TP 50 F 82/5,5-A 0.55 10 4029438 L 523.– 4029548 L 740.–

TP 50 F 90/7,5 0.75 10 4025322 L 516.– 4025321 L 502.–

TP 50 F 90/7,5-A 0.75 10 4029439 L 565.– 4029549 L 821.–

60




Price group: W6

Wilo-Drain TP 50/TP 65 single-channel impeller




1~230 V, 50 Hz

3~400 V, 50 Hz

P2

kW m ] GBP ] GBP

TP 65 E 114/11 1.1 10 4007101 L 956.– 4007099 : L 1 062.–

TP 65 E 114/11-A 1.1 10 4029444 L 970.– 4029550 – L 1 297.–

TP 65 E 122/15 1.5 10 4007107 L 1 216.– 4007105 : L 1 392.–

TP 65 E 132/22 2.2 10 – – – 4007111 : L 1 469.–

Price group: W6

Wilo-Drain TP 65 Vortex impeller




1~230 V, 50 Hz

3~400 V, 50 Hz

P2

kW m ] GBP ] GBP

TP 65 F 91/11 1.1 10 4007085 L 898.– 4007083 : L 883.–

TP 65 F 91/11-A 1.1 10 4029437 L 927.– 4029547 – L 1 025.–

TP 65 F 98/15 1.5 10 4007091 L 1 206.– 4007089 : L 1 079.–

TP 65 F 109/22 2.2 10 – – – 4007095 : L 1 149.–

61




Price group: W6



] GBP



Including EC-Drain single-pump switchgear 1 x 4.0, distribution board, heating and flashing light.

2533127 C 2 385.–





Including DrainControl PL1 single-pump switch-gear, distribution board, heating and flashing light.

2533128 C 2 612.–




2533129 C 3 181.–




2533130 C 3 738.–




2533131 C 3 759.–


Cable length 5 m 503211390 L 60.–

Cable length 10 m 503211893 L 89.–


Cable length 30 m 2004432 L 124.–


Cable length 5 m 501255297 L 117.–

Cable length 10 m

2005504 L 87.–

Float switch MS1Signal transmitters for aggressive fluids and flu-ids containing faeces up to a temperature of 80 °C. Switching Up “On”/ down “Off”.

2004593 L 96.–


6003269 L 206.–






Electronic overload relay for connection of PTC or bimetal temperature sensor, with auto-re-closure lockout and Ex-rated. For switch cabinet installation!

230 V/50...60 Hz

6003277 K 79.–


Electrode relay for connection of external seal-ing chamber electrode. In addition the tempera-ture monitoring (bimetal or PTC sensor) can also be connected. For switch cabinet installation!

6045175 A 159.–

62




Electrode relay NIV 105/SElectrode relay for level control device with electrodes or float switch. For switch cabinet in-stallation!

230 V/50 Hz 6003270 K 205.–


6003283 L 243.–





Cable length 10 m 2519924 L 394.–

Cable length 30 m 2519925 L 533.–

Cable length 50 m 2519926 L 674.–


Cable length 10 m 2519921 L 394.–

Cable length 30 m 2519922 L 533.–

Cable length 50 m 2519923 L 674.–


Cable length 20 m 6033106 K 372.–

Cable length 30 m 6033107 L 559.–

Cable length 50 m 6033108 L 563.–

Zener barrier For the use of a level sensor in potentially explo-sive areas 2519928 L 222.–




AlarmControl 2 Alarm switchgear with mini float switch and in-terposition shock-proof plug 2522847 L 132.–


Price group: W6



] GBP

63




1

3

2

1

1

6


Price group: W6



] GBP



DN 50 6064675 L On Application






DN 50/50/50 2019042 L 346.–

Mounting acces-sories DN 40/50 For one flange connection, with screws, nuts and flat gasket DN 40/50 2057177 L 49.–


10 m 6060716 L 282.–

Price group: W6



] GBP



DN 65 6063973 L 309.–





DN 65/65/65 2017178 L 578.–



10 m 6060716 L 282.–

64




Price group: W6

Stationary wet well installation with hose connection DN 50


] GBP

Pipe bend 90° Made of steel, galvanized with female/male thread G 2 / R 2 DN 50 4027332 L 45.–


10 m 6060716 L 282.–

Adapter DN 50 - Rp 2 Made of steel, galvanized, threaded flange DN 50 with female thread Rp 2, including 1 set of mounting accessories DN 50 4027333 L 39.–

Hose connection Made of plastic, hose nozzle Ø 60 mm including hose clip, male thread R 2 DN 50 4027334 L 17.–

Pipe bend 90° Made of PVC, with hose connector Ø 60 mm, flange on pump side, in-cluding 1 set of mounting accessories DN 50 4027344 L 24.–


13

14

6

15

11

15

12

4

4 Pipe bend6 Chain11 Adapter12 hose connection13 Storz pipe coupling14 Storz hose coupling15 Pressure hose

Price group: W6

Portable wet well installation DN 65 with Storz coupling DN 50


] GBP

Pipe bend 90° Made of steel, galvanized with female/male thread G 2 / R 2 DN 50 4027332 L 45.–


10 m 6060716 L 282.–

Adapter DN 50 - Rp 2 Made of steel, galvanized, threaded flange DN 50 with female thread Rp 2, including 1 set of mounting accessories DN 50 4027333 L 39.–

Storz pipe coupling Made of aluminium, Storz C connection, with female thread G 2 DN 50 2018102 L 12.–

Storz hose coupling Made of aluminium, Storz C connection, with hose connector Ø 52 mm, including hose clip DN 50/65 2015235 L 12.–


Price group: W6

Portable wet well installation with hose connection DN 65


] GBP



10 m 6060716 L 282.–

65




Baseplate TP 65 Made of steel, galvanized, comprising 1 baseplate and fixation material 4015206 L 74.–

Adapter DN 65 - Rp 2½ Made of steel, galvanized, threaded flange DN 65 with female thread Rp 2½, including 1 set of mounting accessories DN 65 4015204 L 73.–

Hose connection Made of brass, hose nozzle Ø 70 mm including hose clip, male thread R 2 ½ DN 65 4015210 L 54.–

Pipe bend 90° Made of EN-GJL-250, with hose connector Ø 70 mm, flange on pump side, including 1 set of mounting accessories DN 65 4027346 L 63.–


Price group: W6

Portable wet well installation with hose connection DN 65


] GBP

Price group: W6

Portable wet well installation with Storz coupling DN 65


] GBP



10 m 6060716 L 282.–

Baseplate TP 65 Made of steel, galvanized, comprising 1 baseplate and fixation material 4015206 L 74.–

Adapter DN 65 - Rp 2½ Made of steel, galvanized, threaded flange DN 65 with female thread Rp 2½, including 1 set of mounting accessories DN 65 4015204 L 73.–

Storz pipe coupling Made of aluminium, Storz C connection, with female thread G 2½ DN 65 2015234 L 18.–

Storz hose coupling Made of aluminium, Storz C connection, with hose connector Ø 52 mm, including hose clip

DN 50/65 2015235 L 12.–


66



Wilo-EMU FA (standard variant)


Application• Pumping of sewage with solid constituents

in water treatment systems and pumping stations

• Local drainage, water control and process water extraction

• Applications in construction and industry

Special features/product advantages• Operation in stationary and portable wet

well installation• Heavy-duty version made of grey cast iron• Easy installation due to suspension unit or

pump base• Longitudinally watertight cable lead-in

• Cable length 10 m• ATEX approval

Note• G: Seal with two mechanical shaft seals• H: Seal with rotary shaft seal and mechanical

shaft seal

0 10 20 30 40 50 60 70 80 90 Q[l/s]

8

16

24

0

40

32

H[m

] Wilo-EMU FA05... - 15... (SVA)



Price group: W8

Wilo EMU FA ... DN 50 single-channel impeller

Pump type Nominal current Mechanical seal Sealing on motor side


Art no.

INA ] GBP

FA 05.32-100E + T 12-2/11GEx 3.7 SiC/SiC SiC/SiC : 6044794 K 1 898.–


FA 05.32-125E + T 12-2/11GEx 4.5 SiC/SiC SiC/SiC : 6035710 L 1 984.–


FA 05.33-100E + F 13.2-2/9 4.7 SiC/SiC Carbon/ceramic – 6046840 A 2 629.–

FA 05.33-112E + F 13.2-2/9 4.7 SiC/SiC Carbon/ceramic – 6046841 A 2 645.–

FA 05.33-125E + F 13.2-2/9 4.7 SiC/SiC Carbon/ceramic – 6046842 L 2 657.–

Price group: W8

Wilo EMU FA ... DN 50 vortex impeller



Art no.

INA ] GBP

FA 05.11-100W + F 12.1-2/9 3.2 SiC/SiC Carbon/ceramic – 6046831 L 1 232.–



FA 05.23-100W + T 12-2/11GEx 2.8 SiC/SiC SiC/SiC : 6046833 K 2 055.–




FA 05.23-133W + T 12-2/11GEx 4.5 SiC/SiC SiC/SiC : 6035708 L 2 018.–

67




Price group: W8




Art no.

INA ] GBP

FA 08.34-110E + T 13-2/12HEx 5 SiC/SiC NBR : 6047536 K 2 445.–

FA 08.34-120E + T 13-2/12HEx 5 SiC/SiC NBR : 6035722 K 2 464.–

FA 08.34-130E + T 13-2/12HEx 7.6 SiC/SiC NBR : 6047552 K 2 487.–

FA 08.34-140E + T 13-2/12HEx 7.6 SiC/SiC NBR : 6047560 L 2 506.–




FA 08.43-110E + T 13-2/12HEx 5 SiC/SiC NBR : 6047584 L 2 461.–

FA 08.43-115E + T 13-2/12HEx 5 SiC/SiC NBR : 6047586 L 2 509.–















FA 08.64-234E + T 17-4/16HEx 13.5 SiC/SiC NBR : 6047622 A 4 227.–


FA 08.64-258E + T 17.2-4/24HEx 21 SiC/SiC NBR : 6047626 A 5 300.–



Price group: W8




Art no.

INA ] GBP





FA 08.52-170W + T 17-4/8HEx 7.9 SiC/SiC NBR : 6045116 K 2 971.–



68






FA 08.66-150W +T 17-2/22HEx 20.5 SiC/SiC NBR : 6049218 A 5 040.–

FA 08.66-180W +T 20.1-2/22GEx 30 SiC/SiC SiC/SiC : 6049220 A 7 709.–

FA 08.66-210W +T 20.1-2/22GEx 30 SiC/SiC SiC/SiC : 6049221 A 7 723.–

Price group: W8




Art no.

INA ] GBP





FA 10.34-258E + T 17.2-4/24HEx 21 SiC/SiC NBR : 6045117 K 5 212.–

FA 10.34-278E + T 20.1-4/22GEx 30.5 SiC/SiC C/Al-oxides : 6047678 K 7 702.–













FA 10.82-230E + T 17.2-4/24HEx 21 SiC/SiC NBR : 6047724 L 5 806.–

FA 10.82-245E + T 17.2-4/24HEx 21 SiC/SiC NBR : 6047726 L 5 818.–

Price group: W8




Art no.

INA ] GBP

69




Price group: W8




Art no.

INA ] GBP







Price group: W8




Art no.

INA ] GBP


FA 15.52-230E + T 17.2-4/16HEx 13.5 SiC/SiC NBR : 6049225 K 5 244.–



FA 15.52-260E + T 20.1-4/22GEx 30.5 SiC/SiC C/Al-oxides : 6047734 K 8 736.–

70




Price group: W6



] GBP





2533128 C 2 612.–



2533129 C 3 181.–

DrainControl 1 (0.5-10A) DE

For single-pump systems; for control of pump via level sensor or float switch

2519930 L 1 385.–

DrainControl 1 (9.0-12 A) DE 2522161 L 2 670.–



DrainControl 1 (20-24 A) SD 2522163 K 3 844.–


DrainControl 1 (32.1-42 A) SD 2519940 K 3 844.–


DrainControl 2 (0.5-10 A) DE

For double-pump systems; for control of pump via level sensor or float switch

2519931 L 1 490.–









Including DrainControl 1 (0.5-10A) sin-gle-pump switchgear direct starter, dis-tribution board, heating and flashing light.

2533130 C 3 738.–


Including DrainControl 2 (0.5-10A) dou-ble-pump switchgear direct starter, dis-tribution board, heating and flashing light.

2533131 C 3 759.–

Float switch WA 65Signal transmitters for fluids up to a tem-perature of 60 °C. Switching Up “On”/ down “Off”.

Cable length 5 m 503211390 L 60.–

Cable length 10 m 503211893 L 89.–


Cable length 30 m 2004432 L 124.–

Float switch WA 95Signal transmitters for fluids up to a tem-perature of 90 °C. Switching Up “On”/ down “Off”.

Cable length 5 m 501255297 L 117.–


Float switch MS1

Signal transmitters for aggressive fluids and fluids containing faeces up to a tem-perature of 80 °C. Switching Up “On”/ down “Off”.



6003269 L 206.–



71







Electronic overload relay for connection of PTC or bimetal temperature sensor, with auto-reclosure lockout and Ex-rat-ed. For switch cabinet installation!

230 V/50...60 Hz 6003277 K 79.–


Electrode relay for connection of external sealing chamber electrode. In addition the temperature monitoring (bimetal or PTC sensor) can also be connected. For switch cabinet installation!

230 V/50...60 Hz 6045175 A 159.–


230 V/50 Hz 6003270 K 205.–

Relay PS2DFRelay for monitoring the power supply for phase failure, phase asymmetry and und-ervoltage. For switch cabinet installation!

6003283 L 243.–


Stainless steel housing, protection class IP 68, output signal 4...20 mA, ATEX-ap-proved

Cable length 10 m 2519924 L 394.–

Cable length 30 m 2519925 L 533.–

Cable length 50 m 2519926 L 674.–


Cable length 10 m 2519921 L 394.–

Cable length 30 m 2519922 L 533.–

Cable length 50 m 2519923 L 674.–


Cable length 20 m 6033106 K 372.–

Cable length 30 m 6033107 L 559.–

Cable length 50 m 6033108 L 563.–




Bubbling-through systemFor connection to Wilo DrainControl PL 1 or PL 2, in conjunction with dynamic pres-sure system.

2516977 L 352.–

Price group: W6



] GBP

72




1

4

53

2

1

1

min.

1 Suspension unit2 Non-return valve3 Gate valve4 Chain5 Pipe bend

Price group: W6



] GBP

Suspension unit R2"/1R

Made of EN-GJL-250, with free passage in DN 50, coupling connection and foot without 90° pipe bend, including profile joint, installation and floor fixation accessories and single-pipe guide pipe bracket Ø 1¼" with-out guide pipe.

FA 05.11 6036886 L 310.–

Suspension unit EHV DN50/1R

FA 05.23 / 05.32 6036887 L 310.–

Pipe bend 90° MTC 32 F 22...33

Made of steel, galvanized, with female/male thread G 2 / R 2 for suspen-sion unit EHV DN50/1R DN 50 6003089 L 42.–






DN 50/50/50 2019042 L 346.–

Mounting accesso-ries DN 40/50 For one flange connection, with screws, nuts and flat gasket DN 40/50 2057177 L 49.–


10 m 6060716 L 282.–

Price group: W6



] GBP



DN 80 6036888 L 355.–

Adapter flange EMU/Flygt

Made of EN-GJL-250, with 1 set of mounting accessories, for connec-tion of an FA pump to a Flygt suspension unit DN 80 6030437 L 319.–




73





DN 80/80/80 2017179 L 707.–



10 m 6060716 L 282.–

Price group: W6



] GBP

Price group: W6



] GBP



FA 10... 6036889 L 512.–

Adapter flange EMU/Flygt

Made of EN-GJL-250, with 1 set of mounting accessories, for connection of an FA pump to a Flygt suspension unit DN 100 6030438 L 319.–





DN 100/100/100 2017180 L 650.–



10 m 6060716 L 282.–

Price group: W6



] GBP

Suspension unit EHV DN150L/2RK


FA 15... 6036890 L 655.–





DN 150/150/150 2017181 L 1 198.–

Mounting accessories DN 150 For one flange connection, with screws, nuts and flat gasket DN 150 2390488 L 45.–


10 m 6060716 L 282.–

74




13

12

11

10

9

min.

44 Chain9 Floor supporting foot10 Pipe bend11 Storz pipe coupling12 Storz hose coupling13 Pressure hose

Price group: W6

Portable wet well installation DN 50


] GBP

Floor supporting foot FA 05...

from EN-GJL-250, painted, including fixation material

FA 05.11 6037169 L 45.–

Floor supporting foot FA 05.../FA 08...

FA 05.23 / 05.32 FA 08.22 / 08.34 / 08.41 / 08.43

6001190 L 99.–

Pipe elbow 90° / Storz C

from EN-GJL-250, including Storz C connection, with female/male thread G 2 / R 2 FA 05.11 6021799 L 40.–

from EN-GJL-250, including Storz C connection, flange on pump side, including 1 set of mounting accessories

FA 05.23 / 05.32 6031671 L 99.–

Storz pipe coupling with internal threat FA 05.33 6003069 L 15.–

Pressure hose / Storz C Synthetic, inside Ø 52 mm, including Storz C coupling, 12/40 bar

5 m 6003651 L 41.–

10 m 6003650 L 59.–

20 m 6003649 L 88.–


5 m 6003052 L 72.–

10 m 6003051 L 129.–

20 m 6003050 L 202.–


10 m 6060716 L 282.–

Price group: W6



] GBP

Floor supporting foot Made of steel (S235JR), lacquered, including fixation material

FA 08.52 6020099 L 364.–

FA 08.23 6022981 L 340.–

Floor supporting foot FA 05.../FA 08... from EN-GJL-250, painted, including fixation material

FA 05.23 / 05.32 FA 08.22 / 08.34 / 08.41 / 08.43

6001190 L 99.–

75




Floor supporting foot FA 08.../FA 10... from EN-GJS-400-15, painted, including fastening material

FA 08.64 FA 10.34 / 10.51 / 10.65

6031386 L 163.–

Pipe bend 90° / Storz B

Made of EN-GJL-250, including Storz B connection, flange on pump side, including 1 set of mounting accessories DN 80 6031385 L 203.–


5 m 6003052 L 72.–

10 m 6003051 L 129.–

20 m 6003050 L 202.–


10 m 6060716 L 282.–

Price group: W6



] GBP

Price group: W6



] GBP

Floor supporting foot FA 10... from EN-GJS-400-15, painted, including fixation material FA 10.22 /

10.43 6035278 L 101.–

Floor supporting foot FA 08.../FA 10... from EN-GJS-400-15, painted, including fastening material

FA 08.64 FA 10.34 / 10.51 / 10.65

6031386 L 163.–

Pipe bend 90° / Storz A

Made of EN-GJL-250, including Storz A connection, flange on pump side, including 1 set of mounting accessories DN 100 6031672 L 211.–

Pressure hose / Storz A Synthetic, inside Ø 102 mm, including Storz A coupling, 8/20 bar

20 m 6022393 L 256.–

10 m 6022392 L 244.–

5 m 6022391 L 126.–


10 m 6060716 L 282.–

Price group: W6



] GBP

Floor supporting foot FA 15... Made of steel (S235JR), lacquered, including fixation material FA 15.52 6024243 K 426.–

Storz pipe coupling made from aluminium, Storz F connection, with flange connection DN 150 FA 15.52 6040247 K 672.–

Pressure hose /Storz F Synthetic, inside Ø 150 mm, including Storz F coupling, 6/15 bar

10 m 6003648 L 432.–

20 m 6003647 L 653.–


10 m 6060716 L 282.–

76




ConstructionSubmersible sewage pump for industrial ap-plications

ApplicationPumping of wastewater and drainage water as well as sewage containing faeces, munic-ipal and industrial sewage for:

• Domestic and site drainage• Sewage and water management

• Environmental and water treatment tech-nology

• Industrial and process engineering

Special features/product advantages• Operation in stationary wet well and dry well

installation as well as portable wet well in-stallation

• Submersible• ATEX approval as standard• Low weight

• Detachable connection cable• Longitudinally watertight cable inlet• Standard-equipped with clogging-free

sheath current cooling• Corrosion-resistant (e.g. swimming-pool

water, salt water, etc.)• Low-wearing• Patented clogging-free hydraulics• Easy installation due to suspension unit or

pump base

Q[m³/h]0 20 40 60 80 100 120 140 160

H[m

]

02468

101214161820

Wilo-DrainTP 80/TP 100



Price group: W6


Pump type Nominal motor power Length of connecting cable

Art no. Explosion protection

3~400 V, 50 Hz

P2

kW m ] GBP

TP 80E160/17 1.7 10 6043950 : K 3 841.–

TP 80E170/21 2.1 10 6043957 : K 3 089.–

TP 80E190/29 2.9 10 6043963 : K 3 450.–

TP 80E210/37 3.7 10 6043971 : K 3 588.–

TP 80E230/40 4 10 6043983 : K 4 780.–

TP 100E160/17 1.7 10 6044004 : K 3 772.–

TP 100E180/26 2.6 10 6044010 : K 3 977.–

TP 100E210/32 3.2 10 6044014 : K 4 124.–

TP 100E230/38 3.8 10 6044018 : K 4 305.–

TP 100E190/39 3.9 10 2008469 : K 3 953.–

TP 100E210/52 5.2 10 2003559 : K 4 052.–

TP 100E230/70 7 10 2003561 : K 5 006.–

TP 100E250/84 8.4 10 2003563 : K 5 175.–

77




Price group:



] GBP

Motor protection plugCEE phase inverter plug and rotation direc-tion indicator, thermal motor protection and impermeability and thermal winding analysis.

3.7 - 5.5 A 2515561 L 328.–

5.5 - 8.0 A 2515562 L 328.–

8.0 - 11.5 A 2515563 L 328.–




2533128 C 2 612.–




2533129 C 3 181.–


For single-pump systems; for control of pump via level sensor or float switch

2519930 L 1 385.–






2533130 C 3 738.–


For double-pump systems; for control of pump via level sensor or float switch

2519931 L 1 490.–






2533131 C 3 759.–




6003269 L 206.–






Electronic overload relay for connection of PTC or bimetal temperature sensor, with au-to-reclosure lockout and Ex-rated. For switch cabinet installation!

230 V/50...60 Hz

6003277 K 79.–


Electrode relay for connection of external sealing chamber electrode. In addition the temperature monitoring (bimetal or PTC sen-sor) can also be connected. For switch cabi-net installation!

6045175 A 159.–


230 V/50 Hz 6003270 K 205.–

78




Relay PS2DFRelay for monitoring the power supply for phase failure, phase asymmetry and under-voltage. For switch cabinet installation!

6003283 L 243.–



Cable length 10 m 2519924 L 394.–

Cable length 30 m 2519925 L 533.–

Cable length 50 m 2519926 L 674.–


Cable length 10 m 2519921 L 394.–

Cable length 30 m 2519922 L 533.–

Cable length 50 m 2519923 L 674.–


Cable length 20 m 6033106 K 372.–

Cable length 30 m 6033107 L 559.–

Cable length 50 m 6033108 L 563.–



Price group:



] GBP

79




Price group: W6



] GBP


Made of EN-GJL-250, painted, with free passage in DN 80, foot elbow including pump holder, profile joint, installation and floor fixation ac-cessories and double-pipe guide pipe bracket Ø 1¼" without guide pipes.

DN 80 2029039 L 461.–

Suspension unit DN 80, including cable guide

Made of stainless steel (AISI 304), with free passage in DN 80, foot el-bow including pump holder, profile joint, installation and floor fixation accessories and 10 m stainless steel cable guide for 5 m installation depth.

DN 80 2032495 K 1 577.–





DN 80/80/80 2017179 L 707.–



5 m 6060658 L 311.–

10 m 6060714 L 600.–

5

1

4

3

2

1

6

7

1

1 Suspension unit2 Non-return valve3 Gate valve4 Pipe bend5 Mounting accessories6 Chain7 Pipe connector

Price group: W6



] GBP


Made of EN-GJL-250, painted, with free passage in DN 100, foot elbow including pump holder, profile joint, installation and floor fixation ac-cessories and double-pipe guide pipe bracket Ø 1½" without guide pipes.

DN 100 2029040 L 527.–

Suspension unit DN 100, including cable guide

Made of stainless steel (AISI 304), with free passage in DN 100, foot el-bow including pump holder, profile joint, installation and floor fixation accessories and 10 m stainless steel cable guide for 5 m installation depth.

DN 100 2004667 A 2 240.–


80







DN 100/100/100 2017180 L 650.–



5 m 6060658 L 311.–

10 m 6060714 L 600.–

Price group: W6



] GBP

81




Price group: W6



] GBP

Pipe bend 90°Made of stainless steel, with hose connector Ø 90 mm and male thread G 3, flange on pump side, including 1 set of mounting ac-cessories

DN 80 2017207 L 593.–

Chain set PCS-CE

As chain sling with 2 shackles in 1.4404 stainless steel. Lifting capacity: 400 kg 5 m 6060658 L 311.–


Floor supporting foot TP 80/100 Made of stainless steel (AISI 304), including fixation material 2004672 L 443.–

Storz pipe coupling Made of aluminium, Storz 90 connection, with female thread G 3 DN 80 2017203 L 60.–

Storz hose coupling Made of aluminium, Storz 90 connection, with hose connector Ø 90 mm, including hose clip DN 80 2017204 L 60.–

Pressure hose Synthetic, inside Ø 90 mm, PN 8, including 2 hose clips

10 m 2017152 L 373.–

20 m 2017193 L 677.–

30 m 2017194 L 975.–

6

15

10

13/14

9

6 Chain9 Floor supporting foot10 Pipe bend13 Storz pipe coupling14 Storz hose coupling15 Pressure hose

Price group: W6



] GBP

Pipe bend 90°Made of stainless steel, with hose connector Ø 110 mm and male thread G 4, flange on pump side, including 1 set of mounting accessories

DN 100 2017184 L 686.–

Chain set PCS-CE



Floor supporting foot TP 80/100 Made of stainless steel (AISI 304), including fixation material 2004672 L 443.–

Storz pipe coupling Made of aluminium, Storz A connection, with female thread G 4 DN 100 2016161 L 48.–

Storz hose coupling Made of aluminium, Storz A connection, with hose connector Ø 110 mm, including hose clip DN 100 2004675 L 48.–

Pressure hose Synthetic, inside Ø 110 mm, PN 8, including 2 hose clips

10 m 2017196 L 325.–

20 m 2017197 L 578.–

30 m 2017198 L 831.–

82




Price group: W6



] GBP



Installation kit TP 80 Made of stainless steel (AISI 304), including installation and floor fixation accessories DN 80 2036896 K 1 252.–

Compensator DN 80 Made of steel, galvanized / neoprene, length 130 mm, including mounting accessories DN 80 2017189 L 178.–

Y-piece DN 80 Made of steel, galvanized, flange PN 10/16 according to DIN 2501 with 2 sets of mounting accessories DN 80/80/80 2017179 L 707.–

min

2

18

17

17

183

2 Non-return valve3 Gate valve17 Installation kit18 Compensator

Price group: W6



] GBP



Installation kit TP 100

Made of stainless steel (AISI 304), including installation and floor fixation accessories DN 100 2026541 K 1 713.–

Compensator DN 100

Made of steel, galvanized / neoprene, length 135 mm, including mounting accessories DN 100 2017190 L 184.–


DN 100/100/100 2017180 L 650.–

83

DrainageSubmersible pumps for mobile applications


Wilo-Drain TP...-AM

ConstructionSubmersible sewage pump for mobile utili-sation

ApplicationMobile application for pumping wastewater and drainage water as well as sewage con-taining faeces, municipal and industrial sewage, including long-fibre constituents, for:

• House and site drainage

• Sewage and water management• Environmental and water treatment tech-

nology• Industrial and process engineering• Emergency management• Fire-fighting

Special features/product advantages• Mobile application due to installation of the

pump in a trolley• Submersible

• Low weight• Detachable connecting cable• Longitudinally watertight cable lead-in• Standard-equipped with clogging-free

sheath current cooling• Corrosion-resistant (e.g. swimming-pool

water, salt water, etc.)• Low-wearing• Patented clogging-free hydraulics

Q[m³/h]0 20 40 60 80 100 120 140 160H

[m]

02468

101214161820

Wilo-DrainTP...-AM

TP 100E250/84-AM

TP 80E160/17-AMTP 100E190/39-AM



Price group: W6

Wilo-Drain TP...-AM

Pump type Nominal motor power Length of connecting cable Art no.

3~400 V, 50 Hz

P2 ]

kW m GBP

TP 80E160/17-AM 1.7 10 6047424 K 3 375.–

TP 100E190/39-AM 3.9 10 6047430 K 4 160.–

TP 100E250/84-AM 8.4 10 6047433 K 4 585.–

Price group: W6



] GBP

Pressure hose / Storz A Synthetic, inside Ø 102 mm, including Storz A coupling, 8/20 bar5 m 6022391 L 126.–

10 m 6022392 L 244.–

Pressure hose / Storz B Synthetic, inside Ø 75 mm, including Storz B coupling, 12/40 bar10 m 6003051 L 129.–

20 m 6003050 L 202.–

84


Wastewater collection and transportWastewater lifting units

Wilo-DrainLift TMP 32

ConstructionWastewater lifting unit (floor-mounted in-stallation)

Application• Automatic drainage for showers, washba-

sins, washing machines/dishwashers, etc.

• Pumping of wastewater and drainage water free of faeces, fibres, grease and oil, and pumping of non-aggressive rainwater.

Special features/product advantages• Modern design• Shower drains from height of 110 mm pos-

sible• Low-noise operation

Scope of deliveryAutomatically switching wastewater lifting unit ready for connection with active carbon filter.

• Connection material for inlet and pressure pipe

• Fixation material for buoyancy safeguards• Installation and operating instructions

Wilo-DrainLiftTMP 32

2

3

0

5

6

4

1H

[m]

0 4 52 31 Q[m³/h]

Price group: W6


Pump type Dimensions Weight approx. Art no.

Width x height x depth m

mm kg ] GBP

TMP 32-0,5 511 x 300 x 268.5 7.1 2017795 L 352.–

Price group: W6



] GBP



85




ConstructionWastewater lifting unit (floor-mounted in-stallation)

Application• Automatic drainage for showers, washba-

sins, washing machines/dishwashers, etc.

• Pumping of wastewater and drainage water free of faeces, fibres, grease and oil, and pumping of non-aggressive rainwater.

Special features/product advantages• Service-friendly thanks to integrated sub-

mersible pump• Suitable for aggressive media (TMP 40/

11 HD)• Low-noise operation

Scope of deliveryAutomatically switching wastewater lifting unit ready for connection

• Connection material for inlet and pressure pipe

• Fixation material for buoyancy safeguards• Installation and operating instructions

Wilo-DrainLiftTMP 40

23

0

56789

4

1

H[m

]0 4 5 8 92 31 6 7 10Q[m³/h]

TMP 40/8

TMP 40/11HD

Price group: W6




mm kg ] GBP

TMP 40/8 510 x 385 x 300 8.0 2522664 L 379.–

TMP 40/11 HD 510 x 385 x 300 8.0 2525932 L 455.–

Price group: W6



] GBP



86



Wilo-DrainLift Box

ConstructionWastewater lifting unit (concealed floor in-stallation)

ApplicationFor concealed floor installation, can be used to drain

• Rooms subject to possible flooding• Garage entrances• Basement stairways• Showers, washbasins, washing machines,

dishwashers

Special features/product advantages• Easy to install due to integrated pump and

non-return valve• Large tank volume• Easy to maintain• Pumps with pressure pipe that can be pulled• Stainless steel tile frame with trap• With extra connection for a second tank

Scope of deliveryPump ready for connection with attached float switch in impact-resistant plastic con-tainer for concealed floor installation. Com-pletely ready for operation with pressure pipe and non-return valve already installed. Pump cable (5 m or 10 m long) with mount-ed shock-proof plug. Installation and oper-ating instructions.

0

2

4

6

8

10

H[m

]

0 2 4 6 8 10 12 14 Q[m³/h]

Box 32/8

Box 40/10

Box 32/11

Wilo-DrainLift Box

Price group: W6

Wilo-DrainLift Box

Pump type Description Art no.

] GBP

Box 32/8

Integrated pump with non-return valve, cover with floor drain and tile frame

2521820 L 939.–

Box 32/11 2521821 L 960.–

Box 40/10 2521822 L 1 005.–

Price group: W6

Level measurement, systems and accessories


] GBP

Float switch WA 65 Signal transmitters for fluids up to a temperature of 60 °C. Switching Up "On"/ down "Off".


Float switch WA 95 Signal transmitters for fluids up to a temperature of 90 °C. Switching Up "On"/ down "Off". 501255297 L 117.–




87

Wastewater collection and transportSewage lifting units



ConstructionSmall sewage lifting unit (floor-mounted in-stallation)

ApplicationFor limited application (in direct connection behind a stand-alone toilet) with macerator for disposing the sewage from an individual toilet in addition to a washbasin, a shower or a bidet.

Special features/product advantages• Modern, space-saving design• Simple and quick installation:

- Self-sealing, direct toilet connection- Built-in active carbon filter- Ready-to-plug

Scope of deliveryLifting unit ready for connection with mac-erator, active carbon filter, flexible pressure

port and installation and operating instruc-tions.

Q[m³/h]0 1 2 3H

[m]

0

2

1

4

3


Price group: W6




mm kg ] GBP

KH 32-0,4 500 x 300 x 269 7.8 2011011 L 385.–

Price group: W6



] GBP



88



Wilo-DrainLift XS-F

ConstructionSmall sewage lifting unit (front wall installa-tion)

ApplicationFor limited use (directly connected to a wall-mounted toilet) for special installation in the front wall. For disposal of sewage from a single toilet as well as drainage from one washbasin, shower or bidet.

Special features/product advantages• Quiet operation for high user comfort• Reliable due to integrated alarm• Simple and quick installation:

- Including all connection sleeves- Built-in active carbon filter- Ready-to-plug

• Suitable for all standard front wall installa-tion systems

Scope of deliveryLifting unit ready for connection including connection sleeves, non-return valve 1¼", DN 32 reducer, active carbon filter, insertion screen for ventilation, accessories for the buoyancy safeguards, drain hose with seal-ing plugs, elastic pressure outlet which can be swivelled and installation and operating instructions.

Q[m³/h]0 1 2 3 4 5 6 7 8

H[m

]

0

2

1

4

3

5

Wilo-DrainLift XS-F

Price group: W6

Wilo-DrainLift XS-F



mm kg ] GBP

XS-F 515 x 410 x 168 6.5 2526945 L 340.–

Price group: W6

Accessories


] GBP

Service hatch Mounting accessories for frameless tile cover suitable for sizes from 150 mm x 150 mm to 0.5 m² 2528216 L 39.–

Gate valveMade out of PVC, with solid pipe ends DN 100 2529808 L 276.–

Made out of PVC, with solid pipe ends DN 150 2529809 L 481.–



89



Wilo-DrainLift S

ConstructionCompact sewage lifting unit with integrated pump

Application• For the pumping of raw sewage that cannot

be piped to the sewer system through the use of natural inclines.

• Drainage of individual rooms

Special features/product advantages• Easy to install due to:

- Low weight- Large scope of delivery- Including non-return valve

• Flexible due to:- Freely selectable inlets- Front-wall-like installation- Space-saving installation (depth 30 cm)

• Safe due to:- Reliable pneumatic level measurement

Scope of deliverySewage lifting unit ready for connection

• Switchgear/plug• Non-return valve• Inlet seal DN 100• Keyhole saw• Fixation material • Soundproofing material• Installation and operating instructions

Q[m³/h]0 4 8 12 16 20 24H

[m]

0

1,0

2,0

3,0

4,0

5,0

S 1/5

Wilo-DrainLift S

Price group: W6

Wilo-DrainLift S

Pump type Gross volume Pressure connec-tion

Art no. Art no.

1~230 V, 50 Hz

3~400 V, 50 Hz

V

l ] GBP ] GBP

S 1/5 45 DN 80 2520947 L 1 891.– 2520948 L 2 095.–

90



Wilo-DrainLift S

Price group: W6



] GBP

Flange piece Made of PUR, with hose, hose clips and mounting accessoriesDN 80 2511595 L 120.–

DN 100 2511597 L 172.–

Gate valve

Made of EN-GJL-250, including 1 set of mounting accessories, flange DN 80 DN 80 2017162 L 184.–

Made of EN-GJL-250, including 1 set of mounting accessories, flange DN 100 DN 100

2017163 L 247.–


Diaphragm hand pump Connection on both sides, female thread Rp 1½

DN 402060166 L 154.–

3-way cock Made of brass, chrome-plated, with female thread 3x Rp 1½ 2511607 L 199.–

Inlet seal DN 100 Seal made of NBR, for additional inlet DN 100 DN 100 2522672 L 54.–

Ventilation combi-nation pipe

Made of plastic, for ventilation connection, or diaphragm hand pump DN 70 2512741 L 27.–

Service hatch Mounting accessories for frameless tile cover suitable for sizes from 150 mm x 150 mm to 0.5 m² 2528216 L 39.–

Price group: W6



] GBP




Concealed distribu-tion box

Including motor protection, acoustic alarm signal for Wilo Drain-Lift S with bare cable end

Single-phase 1~230 V, 50 Hz 2512832 L 355.–

Including motor protection, acoustic alarm signal for Wilo Drain-Lift S with bare cable end

Three-phase current 3~400 V, 50 Hz

2512833 L 364.–

91



Wilo-DrainLift M

ConstructionSewage lifting unit with 1 or 2 integrated pumps

Application• Pumping of untreated sewage that cannot

be conveyed to the sewer system via natural slope.

• For drainage of single-family houses and small building complexes.

Scope of deliveryConnection-ready sewage lifting unit, in-cluding:

• Switchgear (mains-independent alarm)• Inlet seal, DN 100 (for pipe Ø 110 mm)

• Keyhole saw Ø 124 for inlet, DN 100• PVC hose section Ø 50 mm with clamps for

inlet connection, DN 50• Special lip seal for pipe connection, dia-

phragm hand pump DN 50• Collar for ventilation connection, DN 70• Fixation material• Sound absorption strip for insulation of

structure-borne noise• DN 80/100 flange piece with flat gasket,

flexible hose section, hose clips, screws and nuts for connecting the pressure pipeline, DN 100

• Non-return valve (RV version)• Installation and operating instructions


- Compact dimensions- Low weight- Large scope of delivery

• Flexible due to:- Freely selectable inlets

• Safe due to:- Integrated mains-independent alarm

function- Integrated thermal motor protection- Additional potential-free contact- Maintenance interval display for M2- Early fault detection for M2

M 1/8M 2/8

Q[m³/h]0 5 10 15 20 25 30H

[m]

012345678

Wilo-DrainLift M

Price group: W6

Wilo-DrainLift M

Pump type Gross volume Pressure connection

Art no. Art no.

1~230 V, 50 Hz 3~400 V, 50 Hz

V

l ] GBP ] GBP

M 1/8 62

DN 80

2528650 L 1 846.– 2528651 L 1 938.–

M 1/8 RV 62 2528940 L 2 128.– 2528941 L 2 216.–

M 2/8 RV 115 2531400 L 3 122.– 2531401 L 3 260.–

92



Wilo-DrainLift M

Price group: W6



] GBP

Gate valve




Made out of PVC, with solid pipe ends DN 100 DN 100 2529808 L 276.–


Flange piece Made of PUR, with hose, hose clips and mounting accessories

DN 80 2511595 L 120.–

DN 100 2511597 L 172.–

DN 150 2511598 L 229.–


Inlet seal set DN 150 Gasket made of NBR, hose clip and keyhole saw DN 150 2515145 L 124.–

Diaphragm hand pump Connection on both sides, female thread Rp 1½DN 40

2060166 L 154.–


Price group: W6



] GBP

Battery 9V 200 mAh For temporary power supply to the mains-independent alarm during mains power failure 2090288 L 19.–

93



Wilo-DrainLift L

ConstructionSewage lifting unit with 1 or 2 integrated pumps



• For drainage of multi-family houses and smaller structures (cafés, etc).


- Low weight- Only one pressure outlet with double-

pump system (integrated Y-pipe)

- Built-in non-return valve- Large scope of delivery

• Flexible due to:- Freely selectable inlets- Wide performance range

• Safe due to:- Large tank volume- Mains-independent alarm function- Additional potential-free contact - Optional “-C” version with individual fault

signal and follow-up time

Scope of deliverySewage lifting unit, ready for connection, including:

• Switchgear (mains-independent alarm)

• Inlet seal DN100 (for pipe Ø 110 mm)• Keyhole saw Ø124 for inlet DN100• PVC hose section Ø 50 mm with clamps for

inlet connection DN50• Hose section DN50 with hose clips for pipe

connection of diaphragm hand pump or an inlet DN40

• Sleeve for ventilation connection DN70• Fixation material • Sound absorption strip for insulation of

structure-borne noise• Flange piece DN80/100 with flat gasket,

flexible hose section, hose clips, screws and nuts for connection of pressure pipeline DN100

• Installation and operating instructions

L.../10

L.../25L.../20

Q[m³/h]0 5 10 15 20 25 30 35H

[m]

0

4

8

12

16

20

L.../15

Wilo-DrainLift L

Price group: W6

Wilo-DrainLift L

Pump type Gross volume Pressure connection Art no.

3~400 V, 50 Hz

V

l ] GBP

L 1/10

115

DN 80

2532150 L 3 383.–

L 1/15 2532151 L 3 530.–

L 1/20 2532152 L 3 938.–

L 1/25 2532153 L 4 575.–

L 2/10

140

2532154 L 6 484.–

L 2/15 2532155 L 6 735.–

L 2/20 2532156 L 7 152.–

L 2/25 2532157 L 7 808.–

L 1/10 C

115

2519508 K 4 043.–

L 1/15 C 2519509 K 4 359.–

L 1/20 C 2519510 K 4 648.–

L 1/25 C 2519511 K 5 569.–

L 2/10 C

140

2519512 K 6 469.–

L 2/15 C 2519513 K 6 722.–

L 2/20 C 2519514 K 6 999.–

L 2/25 C 2519515 K 7 962.–

94



Wilo-DrainLift L

Price group: W6

Accessories


] GBP

Gate valve






Flange piece

Made of PUR, with hose, hose clips and mounting accessories DN 80 2511595 L 120.–





Diaphragm hand pump Connection on both sides, female thread Rp 1½ DN 40 2060166 L 154.–

3-way cock Made of brass, chrome-plated, with female thread 3x Rp 1½ DN 40 2511607 L 199.–

95



Wilo-DrainLift XL

ConstructionSewage lifting unit with 2 integrated pumps



• For drainage of larger structures (restau-rants, department stores, etc.)

Special features/product advantages• Easy installation / commissioning due to

- Built-in non-return valve

- Higher flexibility in the intake area (con-nection is height-adjustable and can be swivelled)

- Menu-prompted setting on switchgear• Safe due to:

- Large switching volume- Additional potential-free contact- Reliable level measurement due to level

sensor- Suitable for permanent operation (due to

integrated sheath current cooling)

Scope of deliveryConnection-ready sewage lifting unit, in-cluding:

• Switchgear

• Breakdown barrier in the housing with 1 m cable, pre-installed

• Level sensor 0-1 mWS, 10 m cable• Inlet seal, DN 150 for pipe Ø 160 mm• Keyhole saw Ø 175 for inlet DN 150• Hose section DN 50 with hose clips for con-

necting the suction line to the diaphragm hand pump

• Collar for ventilation connection, DN 70• Fixation material • DN 80/100 flange piece with flat gasket,

flexible hose section, hose clips, screws and nuts for connecting the pressure pipeline, DN 100


XL 2/10

XL 2/25

Q[m³/h]0 5 10 15 20 25 30 35H

[m]

0

4

8

12

16

20

Wilo-DrainLift XL

XL 2/20

XL 2/15

Price group: W6

Wilo-DrainLift XL


3~400 V, 50 Hz

V

l ] GBP

XL 2/10

380 DN 80

2532140 K 8 950.–

XL 2/15 2532141 K 9 365.–

XL 2/20 2532142 K 10 100.–

XL 2/25 2532143 K 10 723.–

96



Wilo-DrainLift XL

Price group: W6

Accessories


] GBP

Gate valve






Flange piece







97



Wilo-DrainLift XXL

ConstructionSewage lifting unit with 2 dry-mounted pumps

Application• For the removal of untreated sewage that

cannot be piped to the sewer system through the use of natural inclines.

• For drainage of large building complexes (hotels, hospitals, etc.).

Special features/product advantages• Large tank volume• Low weight of individual components• Wide performance range• Suitable for permanent operation (due to

integrated sheath current cooling)

Scope of delivery• Microprocessor-controlled switchgear with

automatic duty cycling, standby and peak

load operation, potential-free contacts and indicator lights for operation and malfunc-tions for each pump.

• Elastic hose connection for ventilation DN 70.

• Elastic hose connection for connecting a di-aphragm hand pump. Kit for connecting the tank with a pump (including ventilation flange with hose).

Q[m³/h]0 20 40 60 80 100 120H

[m]

02468

101214161820

Wilo-DrainLift XXL

XXL 8..-2/1,7

XXL 10..-2/8,4

XXL 10..-2/5,2

XXL 10..-2/3,9

XXL 10..-2/7,0

XXL 8..-2/2,1

Price group: W6

Wilo-DrainLift XXL


3~400 V, 50 Hz

V

l ] GBP

XXL 840-2/1,7400

DN 80

2509000 K 10 994.–

XXL 840-2/2,1 2509001 K 11 244.–

XXL 880-2/1,7800

2509005 K 11 942.–

XXL 880-2/2,1 2509006 K 12 195.–

XXL 1040-2/3,9

400

DN 100

2509014 K 15 485.–

XXL 1040-2/5,2 2509015 K 15 618.–

XXL 1040-2/7,0 2509016 K 15 756.–

XXL 1040-2/8,4 2509017 K 15 949.–

XXL 1080-2/3,9

800

2509034 K 16 434.–

XXL 1080-2/5,2 2509035 K 16 566.–

XXL 1080-2/7,0 2509036 K 16 690.–

XXL 1080-2/8,4 2509037 K 16 876.–

98



Wilo-DrainLift XXL

Price group: W6



] GBP

Gate valve






Non-return valve

Made of EN-GJL-250, according to DIN EN 12050-4, including 1 set of mounting accessories, flange DN 80 DN 80 2017168 L 226.–

Made of EN-GJL-250, according to DIN EN 12050-4, including 1 set of mounting accessories, flange DN 100 DN 100 2017169 L 295.–

Flange piece




Y-pipeMade of steel, galvanized, including 1 set of mounting accessories DN 80/80/80 2511605 L 647.–

Made of steel, galvanized, including 1 set of mounting accessories DN 100/100/100 2511606 L 786.–



Price group: W6



] GBP




99



Wilo-DrainLift FTS

ConstructionSewage lifting unit with solids separation system



• For drainage of large building complexes (hotels, hospitals, etc.).

Special features/product advantages• High efficiency, due to pumps with small

free ball passage• Large delivery heads• System non-susceptible to clogging, due to

solids separation• Large tank volume

Scope of deliverySewage lifting unit ready for connection with solids separation system incl. pumps, switchgear, non-return valve and Y-piece.Optional, individual blocking of the solids separation reservoir.

Q[m³/h]0 10 20 30 40 50 60H

[m]

0

4

8

12

16

20

24

28

Wilo-DrainLift FTS

Price group: W6

Wilo-DrainLift FTS


3~400 V, 50 Hz

V

l ] GBP

FTS MG 750 STS 65/10

400 DN 100

2090486 A 29 890.–

FTS MG 750 STS 65/14 2090487 A 31 043.–

FTS MG 750 STS 65/18 2090488 A 31 988.–

FTS MG 750 STS 65/22 2090489 A 33 063.–

FTS MG 750 FA 08.43E-140 2090490 A 33 855.–

FTS MG 750 FA 08.43E-150 2090491 A 35 279.–

100



Wilo-DrainLift FTS

Price group: W6



] GBP

Gate valve

Made of EN-GJL-250, including 1 set of mounting accessories, flange DN 100 2017163 L 247.–

Made of EN-GJL-250, including 1 set of mounting accessories, flange DN 150 2017164 L 406.–



Diaphragm hand pump Connection on both sides, female thread Rp 1½ 2060166 L 154.–


Price group: W6



] GBP




101

Wastewater collection and transportPumps stations


Wilo-DrainLift WS 40 Basic

ConstructionSynthetic pumps station

ApplicationWastewater and sewage pumping station for drainage and pressure drainage:

• In the building as lifting unit in accordance with EN 12050

• Outside the building as pumps station in ac-cordance with EN 752

Special features/product advantages• Freely selectable inlets• Flexible use: As lifting unit inside buildings

or as pumps station outside buildings.• Large tank volume (255/400 l)• Flexible installation due to optional sump

length extension• Electric control or switchgear included

Q[m³/h]0 2 4 6 8 10H

[m]

0

1

2

3

4

5

6

7

Wilo-DrainLiftWS 40 Basic

WS 40 Basic

Price group: W6

Wilo-DrainLift WS 40 Basic with pump

Pump type Gross volume Art no. Art no.

1~230 V, 50 Hz 3~400 V, 50 Hz

l ] GBP ] GBP

WS 40 E/TC 40 BV 255 2525600 C 1 726.– 2525601 C 2 242.–

WS 40 D/TC 40 BV 400 2525602 C 4 875.– 2525603 C 4 832.–

102



Wilo-DrainLift WS 40 Basic

Price group: W6



] GBP

Sump extension WS 40/50 Made of PE, Ø 500 x 300, for sumps WS40/50, including seal and mounting accessories 300 mm 2525190 L 126.–

Inlet seal set DN 100 Made of NBR, seal, hose clip and keyhole saw DN 100 2525179 L 54.–


Gate valve






DN 150 2511598 L 229.–

Diaphragm hand pump Connection on both sides, female thread Rp 1½DN 40

2060166 L 154.–

Gate valveMade of red brass, coupling sleeve slider with female thread Rp 1½ 2525187 L 60.–

Made of red brass, coupling sleeve slider with female thread Rp 2 DN 50 2525188 L 74.–

Clamp bolting Made of PE, with female thread (IG), for connection to a PE pres-sure pipeline

2" (IG) on 63 mm pipe Ø

2505046 L 51.–

Price group: W6



] GBP



103



Wilo-DrainLift WS 40-50


ApplicationWastewater and sewage pumping station for drainage and pressure drainage:

• In the building as lifting unit in accordance with EN 12050

• Outside the building as pumps station in ac-cordance with EN 752

Special features/product advantages• Freely selectable inlets• Flexible use: As lifting unit inside buildings

or as pumps station outside buildings.• Large tank volume (255/400 l)• Flexible installation due to optional sump

length extension• Easy installation and maintenance of pumps

through the use of surface coupling made of corrosion-resistant PUR

• Also with Wilo-Drain MTS 40/21...27 macer-ator pump

H[m

]

0

25

20

15

10

5

Q[m³/h]8 12 16 20 24 28 32 36 40 44 48 5240

Wilo-DrainLiftWS 40 - WS 50

MTS 40/21...27TP 50TP 65

Price group: W6


Pump type Gross volume For utilisation of pump(s) Art no.

l ] GBP

WS 50 E 400 TP 50, TP 65 2525160 K 1 846.–

WS 50 D 400 TP 50, TP 65 2525161 K 3 056.–

WS 40 E/MTS 40 255 MTS 40/21 ...27 2525164 K 1 809.–

WS 40 D/MTS 40 255 MTS 40/21 ...27 2525165 K 2 906.–

104




Price group: W6



] GBP

Sump extension WS 40/50 Made of PE, Ø 500 x 300, for sumps WS40/50, including seal and mounting accessories 300 mm 2525190 L 126.–

Inlet seal set DN 100 Made of NBR, seal, hose clip and keyhole saw DN 100 2525179 L 54.–


Gate valve






DN 150 2511598 L 229.–


Vakuumbrecher aus EN-GJL-250, beidseitig mit Innengewinde Rp 1 DN 25 2525180 L 319.–

Gate valveMade of red brass, coupling sleeve slider with female thread Rp 1½ DN 40 2525187 L 60.–

Made of red brass, coupling sleeve slider with female thread Rp 2 DN 50 2525188 L 74.–

Clamp bolting Made of PE, with female thread (IG), for connection to a PE pres-sure pipeline

1½" (IG) on 50 mm pipe Ø 2505044 L 36.–

1½" (IG) on 63 mm pipe Ø 2505045 L 42.–

2" (IG) on 63 mm pipe Ø 2505046 L 51.–

2" (IG) on 75 mm pipe Ø 2525181 L 102.–

Price group:



] GBP

DrainControl PL 1-WS (1~) For single-pump systems, factory setting: level sensor 0-1 mWS (4-20 mA) 2525428 L 807.–

DrainControl PL 1-WS (3~) For single-pump systems, factory setting: level sensor 0-1 mWS (4-20 mA) 2525429 L 807.–

DrainControl PL 2-WS (1~) For double-pump systems, factory setting: level sensor 0-1 mWS (4-20 mA) 2525430 L 1 264.–

DrainControl PL 2-WS (3~) For double-pump systems, factory setting: level sensor 0-1 mWS (4-20 mA) 2525431 L 1 264.–



Cable length 10 m 2519924 L 394.–


Cable length 30 m 2519925 L 533.–


Cable length 50 m 2519926 L 674.–




105



Wilo-DrainLift WS 625


ApplicationWastewater and sewage pumping station for drainage and pressure drainage, outside the building as pumps station in accordance with EN 752.

Special features/product advantages• Small sump diameter (625 mm)• Flexible use due to different installation

heights

• Inlet connection is included with DN 100 as a standard

• Complete due to integrated fittings and seals

• Can be walked on or driven over, depending on the cover (accessories)

• Also with Wilo-Drain MTS 40/21...27 macer-ator pump

Scope of delivery• PE sump with internal pipework including

coupling sleeve slider 1¼", non-return valve and matching discharge pipe

• Seal mounted for inlet DN 100• Seal mounted for ventilation/electrical con-

nection (DN 100).• Seal mounted for pressure pipeline (DN 40 /

Ø50).• Floor supporting foot included with MTS 40• Installation and operating instructions.

Note: Pump is not included in the scope of delivery!

H[m

]

0

25

20

15

10

5

Q[m³/h]6 8 10 12 14 16420

Wilo-DrainLiftWS 625

TMW 32/11MTS 40/21...27TC 40, STS 40

Price group: W6


Pump type For utilisation of pump(s) Height Art no.

mm ] GBP

WS 625 E/1200 TMW 32/11 1200 2097141 K 1 103.–

WS 625 E/1500 TMW 32/11 1500 2097142 K 1 737.–

WS 625 E/1800 TMW 32/11 1800 2097143 K 1 960.–

WS 625 E/2100 TMW 32/11 2100 2097144 K 2 222.–

WS 625 E/1200 TC 40/STS 40 1200 2097145 K 1 698.–

WS 625 E/1500 TC 40/STS 40 1500 2097146 K 1 894.–

WS 625 E/1800 TC 40/STS 40 1800 2097147 K 2 125.–

WS 625 E/2100 TC 40/STS 40 2100 2097148 K 2 375.–

WS 625 E/1200 MTS 40/21...27 1200 2097149 K 1 719.–

WS 625 E/1500 MTS 40/21...27 1500 2097150 K 1 912.–

WS 625 E/1800 MTS 40/21...27 1800 2097151 K 2 152.–

WS 625 E/2100 MTS 40/21...27 2100 2097152 K 2 396.–

106




Price group: W6



] GBP

Sump cover WS625 Standard Made of PE, with screws - lock, can be walked on, Can be walked on (5 kN/m²) 2525207 L 217.–

Sump cover WS625 Class A Made of cast iron, cover with overlay for PE sumps with inside Ø 625, according to EN 124

Can be walked on (Class A) 2525318 L 382.–

Sump cover WS625 Class BMade of cast iron with concrete (BEGU), cover with overlay for PE sumps with inside Ø 625, according to EN 124

Can be driven over (Class B) 2525319 L 485.–

Sump cover WS625 Class DMade of cast iron with concrete (BEGU), cover with self-supporting overlay for PE sumps with inside Ø 625, according to EN 124

Can be driven over (Class D) 2525320 L 1 322.–

Clamp bolting Made of PP, for connection to a PE pressure pipeline50 x 50 mm pipe Ø 2525183 L 45.–

50 x 63 mm pipe Ø 2525184 L 66.–

Price group: W6



] GBP





Including DrainControl PL1 single-pump switch-gear, distribution board, heating and flashing light. 2533128 C 2 612.–

DrainControl PL 1-WS (1~) For single-pump systems, factory setting: level sensor 0-1 mWS (4-20 mA)

2525428 L 807.–

DrainControl PL 1-WS (3~) 2525429 L 807.–


Cable length 5 m 503211390 L 60.–

Cable length 10 m 503211893 L 89.–


Cable length 30 m 2004432 L 124.–


Cable length 5 m 501255297 L 117.–

Cable length 10 m

2005504 L 87.–

Float switch MS1Signal transmitters for aggressive fluids and fluids containing faeces up to a temperature of 80 °C. Switching Up "On"/ down "Off".

2004593 L 96.–

Ex cut-off relay ER 143Ex cut-off relay for connection of 2 float switches or 3 electrodes, relay in the ISO housing with trans-parent cover, IP 40

6003269 L 206.–







Level sensor 0-1 mWS Stainless steel housing, protection class IP 68, out-put signal 4...20 mA, ATEX-approved

Cable length 10 m 2519924 L 394.–

Cable length 30 m 2519925 L 533.–

Cable length 50 m 2519926 L 674.–

107







Flashing light Revolving light for installation on switch cabinet, outdoor installation, 1~230 V 2510429 L 78.–

Signal horn For connection to Wilo DrainControl, 1~230 V 501459398 L 78.–


Price group: W6



] GBP

108



Wilo-DrainLift WS 900/1100


ApplicationWastewater and sewage pumping station for drainage and pressure drainage, outside the building as pumps station in accordance with EN 752.

Special features/product advantages• Deposit-free collection space• Maximum strength due to hemispherically

shaped sump floor• 2/4 inlets can be selected onsite

• Pumps station ready for connection (without pump and switchgear)

• V4A stainless steel pipework• Also with Wilo-Drain MTS 40/21..39 and

MTC macerator pumps

Scope of delivery• Pipework made of stainless steel, from

pump pressure joints up to approx. 10 cm outside of the sump

• Surface coupling system including seals• Non-return valve, gate valve completely

mounted• Flush connection G 1½

• Stainless steel chain including fastening hook

• Supporting bar for level monitoring (level sensor, float switch) including installation accessories- Double pumping stations are each sup-

plied with twice the quantity of surface couplings and fittings.

• Connection material for two DN 150 KG in-let pipes


Note: Pump is not included in the scope of delivery!

Q[m³/h]50 60 70 9030 402010 8000

10

20

30

40

H[m

]

Wilo-DrainLiftWS 900/WS 1100

MTC 32MTC 40MTS 40

TS 40TP 50TP 65

STS 65TP 80

Price group: W6


Pump type Version Art no.

] GBP

WS 900 E/TS 40 Single-pump system for TS 40 2507739 L 2 318.–

WS 900 D/TS 40 Double-pump system for TS 40 2507740 L 3 104.–

WS 900 E/MTS 40-MTC Single-pump system for MTS 40, MTC 2531440 L 2 435.–

WS 900 E/TP 50 Single-pump system for TP 50 2506435 L 2 399.–

WS 900 E/TP 65-STS 65 Single-pump system for TP 65, STS 65 2506436 L 2 794.–

WS 1100 E/MTS 40-MTC Single-pump system for MTS 40, MTC 2531441 L 2 833.–

WS 1100 D/MTS 40-MTC Double-pump system for MTS 40, MTC 2531442 L 3 688.–

WS 1100 E/TP 50 Single-pump system for TP 50 2506432 L 3 107.–

WS 1100 D/TP 50 Double-pump system for TP 50 2506441 L 3 916.–


WS 1100 D/TP 65-STS 65 Double-pump system for TP 65, STS 65 2506442 L 4 516.–


109




Price group: W6



] GBP

Sump cover WS 900/1100 Standard Made of PE, with two stainless steel locks, can be walked on 2506477 L 223.–

Sump cover WS 900/1100 flood-proof Made of PE, with seal and six stainless steel locks, can be walked on 2506478 L 443.–

Sump extension WS 900/1100 Made of PE, Ø 730 x 800, for WS900/1100 sumps, including seal, mounting accessories and supporting bar extension for level sensor 2506431 L 397.–

Clamp bolting Made of PE, with female thread (IG), for connection to a PE pressure pipeline

2505044 L 36.–

2505045 L 42.–

2505046 L 51.–

Price group: W6



] GBP







2533128 C 2 612.–

DrainControl PL 1-WS (1~) For single-pump systems, factory setting: level sensor 0-1 mWS (4-20 mA)

2525428 L 807.–





2533129 C 3 181.–

DrainControl PL 2-WS (1~) For double-pump systems, factory setting: lev-el sensor 0-1 mWS (4-20 mA)

2525430 L 1 264.–

DrainControl PL 2-WS (3~) 2525431 L 1 264.–

Float switch WA 65 Signal transmitters for fluids up to a tempera-ture of 60 °C. Switching Up "On"/ down "Off".

Cable length 5 m 503211390 L 60.–

Cable length 10 m 503211893 L 89.–


Cable length 30 m 2004432 L 124.–

Float switch WA 95 Signal transmitters for fluids up to a tempera-ture of 90 °C. Switching Up "On"/ down "Off".

Cable length 5 m 501255297 L 117.–

Cable length 10 m

2005504 L 87.–

Float switch MS1Signal transmitters for aggressive fluids and fluids containing faeces up to a temperature of 80 °C. Switching Up "On"/ down "Off".

2004593 L 96.–


Electronic overload relay for connection of PTC or bimetal temperature sensor, with auto-re-closure lockout and Ex-rated. For switch cabi-net installation!

230 V/50...60 Hz 6003277 K 79.–


230 V/50 Hz 6003270 K 205.–

110




Relay PS2DFRelay for monitoring the power supply for phase failure, phase asymmetry and undervolt-age. For switch cabinet installation!

6003283 L 243.–

Ex cut-off relay ER 143Ex cut-off relay for connection of 2 float switches or 3 electrodes, relay in the ISO hous-ing with transparent cover, IP 40

6003269 L 206.–






Bubbling-through systemFor connection to Wilo DrainControl PL 1 or PL 2, in conjunction with dynamic pressure sys-tem.

2516977 L 352.–



Cable length 10 m 2519924 L 394.–

Cable length 30 m 2519925 L 533.–

Cable length 50 m 2519926 L 674.–


Cable length 10 m 2519921 L 394.–

Cable length 30 m 2519922 L 533.–

Cable length 50 m 2519923 L 674.–




Flashing light Revolving light for installation on switch cabi-net, outdoor installation, 1~230 V 2510429 L 78.–



Price group: W6



] GBP

111

Electrical accessories Wilo-DrainPumps / lifting units


Switchgears, tripping units, alarm switchgears

Price group: W6

Basic switchgears and accessories


] GBP

Motor switchgear / motor pro-tection plug CEE

CEE phase inverter plug (max. rated motor power P2 = 4 kW) with rotation direction indicator but without thermal motor protection.

2526189 K 286.–

Motor protection plug

CEE phase inverter plug and rotation direction indicator and thermal motor protection

1.2 - 1.8 A 2525864 K 248.–

1.8 - 2.6 A 2525865 K 322.–

2.6 - 3.7 A 2017211 K 259.–

3.7 - 5.5 A 2017212 K 259.–

5.5 - 8.0 A 2017213 K 259.–

8.0 - 11.5 A 2017214 K 259.–

CEE phase inverter plug and rotation direction indicator, thermal motor protection and impermeability and thermal winding analysis.

3.7 - 5.5 A 2515561 L 328.–

5.5 - 8.0 A 2515562 L 328.–

8.0 - 11.5 A 2515563 L 328.–

EC-Drain PD 1 (1~230 V/50 Hz) Single-pump switchgear for controlling 1 submersible mo-tor pump with dynamic pressure system or 2 float switches of type WA 65, WA 95 or MS 1.

2533842 L 511.–

EC-Drain PD 1 (3~400 V/50 Hz) 2533843 L 511.–

EC-Drain 1x4.0 For control of a submersible pump up to 4 kW.Can be used with 2 WA 65 or WA 95 float switches. 2523488 L 376.–

EC-Drain 2x4.0For control of 2 submersible pumps up to 4 kW. Can be used with 3 float switches each of type WA 65, WA 95 or MS 1.

2533851 L 510.–

EC-Drain 2x4,0-A For controlling 2 submersible pumps up to 4 kW, incl. 2 float switches WA 65 with 10 m cable. 2535959 L 763.–

Attention: Switchgears are not explosion protected and may be installed only outside of the potentially explosive area. If pumps are used within potentially explo-sive areas, it may become necessary to take measures onsite.

Price group: W6



] GBP

DrainControl PL 1 (0.3-12 A)

Single-pump switchgear for control of 1 submersible pump with dynamic pressure or bubbling-through system, float switch or level sensor. Factory setting: level sensor 0-1 mWS (4-20 mA). Level sensors from 0-1 mWS to 0-5 mWS can also be used.

2522619 L 707.–

DrainControl PL 1-WS (1~) Single-pump switchgear including main power switch for control of 1 submersible pump with dynamic pressure or bubbling-through system, float switch or level sensor. Factory setting: level sensor 0-1 mWS (4-20 mA). Level sensors from 0-1 mWS to 0-5 mWS can also be used.

2525428 L 807.–


DrainControl PL 2 (0.3-12 A)

Double-pump switchgear for control of 2 submersible pumps with dy-namic pressure or bubbling-through system, float switch or level sensor. Factory setting: level sensor 0-2.5 mWS (4-20 mA). Level sensors from 0-1 mWS to 0-5 mWS can also be used.

2519069 L 1 165.–

DrainControl PL 2-WS (1~) Double-pump switchgear including main switch for control of 2 submers-ible pumps with dynamic pressure or bubbling-through system, float switch or level sensor. Factory setting: level sensor 0-1 mWS (4-20 mA). Level sensors from 0-1 mWS to 0-5 mWS can also be used.

2525430 L 1 264.–

DrainControl PL 2-WS (3~) 2525431 L 1 264.–

112





For control of 1 submersible pump in conjunction with level sensor 0-2.5 mWS (4-20 mA), or float switch (at least 3). DE = direct starter, SD = star-delta starter

2519930 L 1 385.–











For control of 2 submersible pumps in conjunction with level sensor 0-2.5 mWS (4-20 mA), or float switch (at least 3). DE = direct starting, SD = star-delta starting

2519931 L 1 490.–










Attention: Switchgears are not explosion protected and may be installed only outside of the potentially explosive area. If pumps are used within potentially explo-sive areas, it may become necessary to take measures onsite.

Price group: W6



] GBP

Price group: W6



] GBP

Float switch WA 65

Signal transmitters for fluids up to a temperature of 60 °C. Switching Up "On"/ down "Off". Cable lengths: 5, 10, 20 and 30 m. Switching capacity: 250 V / 8 A / 1.1 kW.When used in potentially explosive areas an Ex cut-off relay must be provided for the connection!

Cable length 5 m 503211390 L 60.–

Cable length 10 m 503211893 L 89.–


Cable length 30 m 2004432 L 124.–

Float switch WA 95

Signal transmitters for fluids up to a temperature of 90 °C. Switching Up "On"/ down "Off". Cable lengths: 5 and 10 m. Switching capacity: 250 V / 8 A / 1.1 kW.When used in potentially explosive areas an Ex cut-off relay must be provided for the connection!

Cable length 5 m 501255297 L 117.–


Float switch MS1

Signal transmitters for aggressive fluids and fluids containing faeces up to a temperature of 80 °C. For installing the level controller, either two signal trans-mitters must be used, or one switchgear with config-urable run-on time (e.g. DrainControl... or EC-Drain...). Switching Up "On"/ down "Off". Cable length: 10 m. Switching capacity: 250 V / 5 A . When used in potentially explosive areas an Ex cut-off relay must be provided for the connection!


113




Ex cut-off relay ER 143

Ex cut-off relay for installation of level control devic-es with electrodes or float switches. Input sensitivity configurable between 2...30 kOhm or 3...300 kOhm. Protection class IP 40 (housing), IP 20 (terminals)

6003269 L 206.–





Dynamic pressure system Diving bell with 10 m hose length. For connection to Wilo DrainControl PL 1 or PL 2. 2516976 L 111.–

Bubbling-through system

Bubbling-through system with compressor, non-re-turn valve and T-iron. For connection to Wilo Drain-Control PL 1 or PL 2, in conjunction with dynamic pressure system.

2516977 L 352.–



Cable length 10 m 2519924 L 394.–

Cable length 30 m 2519925 L 533.–

Cable length 50 m 2519926 L 674.–


Cable length 10 m 2519921 L 394.–

Cable length 30 m 2519922 L 533.–

Cable length 50 m 2519923 L 674.–


Cable length 20 m 6033106 K 372.–

Cable length 30 m 6033107 L 559.–

Cable length 50 m 6033108 L 563.–






Cable length 20 m 6021204 L 151.–



Cable length 10 m 6021206 L 415.–

Cable length 20 m 6021205 L 421.–



Cable length 10 m 6027184 L 450.–

Cable length 20 m 6001283 L 521.–

FEK-DM


2065238 L 406.–

Price group: W6



] GBP

114




Price group: W6

Tripping unit for installation in existing switchgears, or as module for switchgears with conventional design, installation on 35 mm top-hat rail


] GBP

SK 545 Tripping unit for monitoring of max. 2 Wilo submersible pumps TP 80, TP 100. 2015577 L 298.–


Electronic overload relay for connection of PTC or bimet-al temperature sensor, with auto-reclosure lockout and Ex-rated. Power supplies: 24 V AC/DC, 120 V/50...60 Hz, 230 V/50...60 Hz. For switch cabinet installation!

230 V/50...60 Hz 6003277 K 79.–

24 V AC/DC 6049312 L 92.–


Electrode relay for connection of external sealing cham-ber electrode. In addition the temperature monitoring (bimetal or PTC sensor) can also be connected. For switch cabinet installation!

230 V/50...60 Hz 6045175 A 159.–

Electrode relay NIV 105/SElectrode relay for level control device with electrodes or float switch. Supply voltage: 120 V/60 Hz or 230 V/50 Hz. For switch cabinet installation!

230 V/50 Hz 6003270 K 205.–

Relay PS2DFRelay for monitoring the power supply for phase failure, phase asymmetry with LED indicator lamp (8...15 %) and undervoltage (30 %) For switch cabinet installation!

6003283 L 243.–

Evaluation relay DGW 2.01

Evaluation relay with two separately switching changeo-ver contacts for temperature monitoring and control with PT100 sensor. Temperature range -100°C...+500°C, triggering 0.1 °C

6002962 L 384.–

Price group: W6

Alarm switchgears and accessories for outdoor installation


] GBP

KASSmall alarm switchgear in ISO plug housing (shock-proof), self-charging power supply unit, 70 dBA signalling tone and signal transmitter (electrode) with 3 m cable

501534094 L 222.–

AlarmControl 1 Alarm switchgear with mini float switch for potential-free make contact and shock-proof plug 2522846 L 117.–


Flashing light Revolving light for installation on switch cabinet, outdoor installation, 1~230 V 2510429 L 78.–


Battery 9V 200 mAh For temporary power supply to the mains-independent alarm during mains power failure 2090288 L 19.–

115




Price group: W6

Switch cabinets for outdoor installation (cable distribution cabinet without equipment)1)

Type Description Dimensions Art no.

mm ] GBP

Cable distribution cabinet one part size 00

For DrainControl PL 1 and Wilo-EC-Drain 1x4.0 400 x 800(1600) x 225 2523791 C 935.–

Cable distribution cabinet two parts size 00 For DrainControl PL 1 WS 460 x 830(1760) x 330 2523672 C 1 078.–

Cable distribution cabinet two parts size 0

For DrainControl 1+2 (0.5-10A) direct starter, PL 2 and PL 2 WS 590 x 830(1760) x 330 2523673 C 1 100.–

Cable distribution cabinet two parts size 1 785 x 830(1760) x 330 2523674 C 1 691.–

Cable distribution cabinet two parts size 2 1115 x 830(1760) x 330 2523675 C 2 336.–

1) Optional installation with selected accessories (additional charge).

Price group: W6

Schaltschränke zur Außenaufstellung (Kabelverteilerschränke inklusive Schaltgerät)

Type Description Dimensions Art no.

mm ] GBP


Including EC-Drain single-pump switch-gear 1 x 4.0, distribution board, heating and flashing light.

400 x 800(1600) x 225 2533127 C 2 385.–



400 x 800(1600) x 225 2533128 C 2 612.–



590 x 830(1760) x 330 2533129 C 3 181.–


Including DrainControl 1 (0.5-10A) sin-gle-pump switchgear direct starter, dis-tribution board, heating and flashing light.

590 x 830(1760) x 330 2533130 C 3 738.–


Including DrainControl 2 (0.5-10A) dou-ble-pump switchgear direct starter, dis-tribution board, heating and flashing light.

590 x 830(1760) x 330 2533131 C 3 759.–

Drainage and Sewage Wastewater collection and transport 13state-of-the-art (DIN 31051/DIN-EN 13306)....

Documents

Transcript of Drainage and Sewage Wastewater collection and transport 13state-of-the-art (DIN 31051/DIN-EN 13306)....