Dr. Ben Zoghi, PhD, P.E. Victor H. Thompson Enodwed Professor

Director of RFID Oil & Gas Consortium

Accomplished university professor and administrator with considerable

experience leading and managing in the academic setting for over twenty

five years. Background in real world engineering experiences in high-tech

industry. Dynamic, entrepreneurial, visionary. Developed competitive new

programs and partnerships. Strong leader, strategic thinker and effective

team builder.

CITIZENSHIP: United States of America

EXPERT WITNESS: RFID (passive & Active) Hardware Design, sensors, Software Enterprise,

Wireless Tracking Systems

EDUCATION:

Ph.D. Bioengineering/Electrical Engineering, Texas A&M University, December 1993

Dissertation: “A Novel Optically-Based Approach to Intracranial

Pressure Measurement”

M.S. Electrical Engineering, The Ohio State University, Ohio, June 1986

B.S. Electrical Engineering, Seattle University, Washington, June 1982

P.E. Registered Professional Engineer, Certificate #73652, State of Texas, 1992

Certificate Developing Leadership through Emotional Intelligence, Case Western Reserve

University, 2002-2004

Certificate Multi-Health System (MHS) Emotional Quotient (EQ-i) Certified Instructor, 2012

PROFESSIONAL EXPERIENCE:

Educational

March 1999 – Present Full Professor (Tenured)

September 2009 – Present Victor H. Thompson Endowed Chair Professorship Holder

June 2008 – Present Director of RFID Oil & Gas Solution group Consortium,

http://rfid.tamu.edu

August 2005 – 2008 Director of RFID/Sensor Lab

January 2002 – March 2005 Program Coordinator of Industrial Distribution,

Director of Thomas and Joan Read Center,

Leonard and Valerie Bruce Leadership Chair

September 2001 – March 2003 Program Director of the Master in Distribution

September 2001 – January 2002 Interim Program Coordinator of Industrial Distribution

Interim Director of Thomas and Joan Read Center

Interim Program Director of the Master in Distribution

January 2001 – January 2002 Victor H. Thompson Endowed Professorship

April 1999 – October 2000 Texas A&M University, College Station, Texas

Associate Department Head

August 1996 – August 2001 Semiconductor Systems Laboratory, Texas A&M University

Director

September 1993 – August 1999 Texas A&M University, College Station, Texas

Associate Professor (Tenured)

August 1987 – August 1993 Texas A&M University, College Station, Texas

Assistant Professor

January 1987 – August 1987 Franklin University, Columbus, Ohio

Adjunct Professor

September 1986 – June 1987 Columbus Technical Institute, Columbus, Ohio

Instructor

September 1986 – June 1987 The Ohio State University, Columbus, Ohio

Lecturer

September 1984 – June 1986 The Ohio State University, Columbus, Ohio

Teaching Assistant

Industrial

May 2009 – August 2009 South Texas Nuclear Project, Bay City, TX

Industry Faculty Fellow

June1999 – August 1999 Applied Materials, Etch Division, Santa Clara, CA

Industry Faculty Fellow

June1997 – September 1997 Applied Materials, New Product Division, Santa Clara, CA

Industry Faculty Fellow

June1996 – September 1996 Applied Materials, Manufacturing Division, Santa Clara, CA

Industry Faculty Fellow

January 1991 – August 1991 Canberra on the Los Alamos Project

Design Engineer

June 1988 – August 1988 Texas Transportation Institute, College Station, Texas

Design Engineer

October 1982 – January 1984 ElectroScience Laboratory, Columbus, Ohio

Research Associate

BOOKS:

1. Zoghi, B., “Engineering Leadership,” ISBN 0-13-081530-6, DiggyPOD, November 2011.

2. Zhan, W., McDermott, M., Zoghi, B., and Hasan, M., “Modeling, simulation, and analysis for battery

electric vehicles,” Machine Learning and Systems Engineering, S.-I. Ao et al. (eds.), Lecture Notes in

Electrical Engineering, Vol. 68, Springer, 2010, pp. 227-241. (Book Chapter)

3. Zoghi, B. and et al., “RFID Applications and Cases,” published by ICFAI Publishing Company, ISBN

#81-314-0418-8, December 2006.

4. Octavio Carranza, Zoghi, B., et al., “Logística: Mejores Prácticas en Latinoamérica", Publisher

Thomson Custom Publishing, ( #970-686-411-3), spring 2005.

5. Zoghi, B., Jennings, D. “Fundamentals of Distribution Profitability”, Thomson Custom Publishing, (

ISBN 0-759-3323-1) 2005.

6. Zoghi, B., Kim, S., “Global Distribution- A Study of Distribution in Mexico”, Thomson Custom

Publishing, (Book: ISBN 0-759-34640-2) 2005.

7. Kane-Sellers, L., Koerber-Walker, J., Zoghi, B., “Book: Connecting Resources: A Primer for

Electronics Distribution”, Thomson Custom Publishing, (ISBN 0-759-33249-5), Thomson Custom

Publishing, 2004.

8. Lyster, T., Zoghi, B., “System Automation Concepts & Applications,” Thomson Custom Publishing,

(ISBN 0-759-3323-1) 2003.

9. Ishfaq, R., Zoghi, B., “Industrial Electricity,” Thomson Custom Publishing, (ISBN 0-759-3408-9)

2003.

RESEARCH:

1. Private Industry, Through The Mary Kay O’Connor Process Safety Center, “Radio frequency

identification (RFID) Smart Corrosion Coupon,” Principal Investigator: S., Mannan, CO-PI:,

Zoghi, B., June 2013- June 2015. Amount requested $537,225.00

2. Completion Rental, Inc., “RFID Inventory Management Systems for Oil & Gas equipment

Optimization,” Principal Investigator: Zoghi, B., January 2013- 2014. Amount requested

$50,000.00

3. National Science Foundation, “RFID Tracking and Tracing Disaster Victims using,” Principal

Investigator: R. Murphy, CO-PI:, Zoghi, B., Minson, Matthew, Brown, Susanne, August 2013-

August 2015. Amount requested $600,000.00 (Plan to revise and resubmit)

4. National Instrument/Texas Instrument, “Smart Badge,” Principal Investigator: Zoghi, B., January

2013 – December 2013. (Support capstone project) Amount funded $5,000.00

5. Tier One Program (TOP) Grant, “Engineering Leadership Institute: Engineering Emotional

Intelligence,” Co-PIs: Zoghi, B., Nafukho, F., Cerami, J., August 2012-December 2012 - Amount

requested $318,460.75

6. Motorola, “Golden-i Augmented Reality for construction application,” Principal Investigator:

Zoghi, B., September 2011 – August 2012. Amount funded $10,000.00

7. United Stated Air Force Nuclear Weapons Center, “Nuclear Components monitoring and Tracking

using RFID/Wireless Technologies,” Principal Investigator: Shipcom Wireless, CO-PI: Zoghi, B.,

Ayala, J., (TEES-TCAT) February 2011 – August 2011. Amount requested $350,000.00 (Not

funded)

8. National Science Foundation Engineering Research Center, Principal Investigator: R. Murphy,

CO-PI: Langari, R., et al, Zoghi, B., August 2010- August 2015. Amount requested

$18,500,000.00 (Resubmission is underway for 2013)

9. Creation of a Modular Curriculum in Digital Instrumentation and Control Targeted at the Nuclear

Power Generation Industry, Principal Investigator: W. Zhan, CO-PI: Zoghi, B., Porter, J., Morgan,

J., Peddicord, K.L, Poston, J., June 2010- June 2011. Amount requested $131,115 (Not Funded)

10. BP, “RFID Enterprise Software Evaluation,” Principal Investigator: B. Zoghi, January 2010– August

2010. Amount funded $10,000

11. Design and Implementation of a Real-Time RFID-Based Inventory Management System for

N-Line Traffic Maintenance, N-Line Maintenance, Principal Investigator: B. Zoghi, CO-PI: G.

Gaukler, January 2009 – December 2009. Amount funded $37,145

12. RFID testing for radiation/contamination/extreme temperature and security- A three phase projects

proposal submitted to South Texas Project, Principal Investigator: B. Zoghi, August 2008 – September

2009 Amount requested $125, 000 (Not Funded))

13. RFID for real-time tracking of modular precast, Tindall Corporation, Principal Investigator: G.

Gaukler, CO-PI: B. Zoghi, September 2008 – March 2009, Amount requested $79,020 (not

Funded)

14. RFID Cookbook for the Capital Projects Industry, FIATECH, Principal Investigator: B. Zoghi, CO-PI:

G. Gaukler, August 2008 – September 2009 Amount requested $114,660 (Not Funded)

15. Creation of a Modular Curriculum in Digital Instrumentation and Control Targeted at the Nuclear

Power Generation Industry, Principal Investigator: W. Zhan, CO-PI: Zoghi, B., Porter, J., Morgan,

J., Peddicord, K.L, Poston, J., June 2009-2010. Amount requested 147,807.00 (Not Funded)

16. Automating the test system for the WL Breaker Production Line, Siemens Energy & Automation, Inc.,

Principal Investigator: B. Zoghi, January 2008 – December 2008. Amount funded $27,680.

17. Streamlining Integrated Circuit Design Process: Verification and Testing, Integrated Device

Technology, Principal Investigator: B. Zoghi, CO-PI: J. Porter, September 2007 to October 2009.

Amount funded $276,000.

18. RFID Solution Improves Real-Time Inventory Management and Lowers Costs, North American

Precast Concrete, San Antonio, Texas, Principal Investigator: B. Zoghi, January 2007, Amount

requested $125,000.

19. Radio Frequency Identification (RFID) for Real-Time Inventory and Maintenance Applications,

Association of American Railroads Affiliated Laboratory for Railway Research, Principal

Investigator: B. Zoghi, January 2007 – December 2007. Amount Funded $25,000.

20. Design of a Radio Frequency Software Driver, EIS Systems, Principal Investigator: B. Zoghi,

January 2007 – August 2007. Amount Funded $20,000.

21. Design of a RFID system Solution for Automated Theft Detection, Hartford Public Library,

Principal Investigator: B. Zoghi, December 2006– May 2007. Amount Funded $15,000.

22. Integrated Circuit (IC) design and verification processes, Integrated Device Technology, Principal

Investigator: B. Zoghi, CO-PI: Y.K., Jung, August 2006-September 2007. Amount Funded

$150,000.

23. Design, Analysis and Testing for the Production RFID-GPS smart Locking System for Cargo

Security, Innerloc Systems, Principal Investigator: B. Zoghi, September 2006-December 2006,

Amount Funded $3,000.

24. Warehouse Optimization Using Complementary Operational Methods, House of Forgings,

Principal Investigator: S. Thompson, Co-Pi, B. Zoghi. December 2005 – August 2006. Amount

Funded: $12,000.

25. Photondynamics Inc: “Improvement Methods Via Quality System Solutions”, Co-Principal

Investigators: Thompson, S., Zoghi, B., May 2005 – August 2006, Amount Funded: $63,000.

26. Elk, Corporation: “Outsourcing of Manufacturing Management for ELK Corporation”, Co-

Principal Investigators: Thompson, S., Zoghi, B., February 2005 – December 2005, Amount

funded: $58,000.

27. Hisco-Motorola: Survival in the Second Automotive Century: Developing Collaborative Value

Chain Practices with Strategic Supplier Partners, Co-Principal Investigators: M. Pappu, S.

Thompson, B. Zoghi, May 2005-May 2006, Amount funded: $10,000

28. National Wholesales-Distributors: Services … a Strategic Weapon for Wholesale Distribution,

Strategic Business and Pricing Models for services: Principal Investigator: B. Zoghi, Co-Principal

Investigators: Barry Lawrence and B. Reynolds, 2004-2005, Amount funded: $33,000

29. Shelter: Continuous Improvement in Effectiveness/Efficiency for Shelter Distribution- Lafayette

Wood-Works: Principal Investigator: B. Zoghi, Co-Principal Investigator: B. Reynolds, 2004-

2005, Amount funded: $31,174

30. An Information Consortium to Study Supply Chain Integration. IBM, Prelude Systems Inc., Rexel,

Siemens Energy & Automation, and other firms’ sponsors. Principal Investigator: F. Barry

Lawrence, Ben Zoghi Co-Principal Investigators: Daniel Jennings, 2000-2005, Amount funded:

$495,000

31. “Network Optimization Project”, Wilson Supply, sponsor, F. Barry Lawrence, Principal

Investigator, Ben Zoghi, Brian Reynolds, Co-Principal Investigators. Amount funded: $95,035,

2004

32. “Market Feasibility Analysis and Optimal Distribution Channel Strategy of Energy Metering

Systems in the Mexico”, Equipment Controls Company, sponsor, F. Barry Lawrence, Principle

Investigator, Ben Zoghi and Madhav Pappu, Co-Principle Investigators, Amount

funded:$68,639, 2003.

33. “Software Evaluation for Industrial Distribution Channels: Channel Needs and Functionality

Analysis”, Salient Corporation, sponsor, F. Barry Lawrence, Principal Investigator, Ben Zoghi, co-

Principal Investigator, Amount funded:$24,529, 2003.

34. “Inventory Optimization Project”, Webb Distributors, sponsor, F. Barry Lawrence, Principle

Investigator, Ben Zoghi, Brian Reynolds and Madhav Pappu Co-Principle Investigators, 2003,

Amount funded:$88,235.

35. “A Warehouse Layout Project”, The Maurice Pincoffs Company, sponsor. F. Barry Lawrence,

Principle Investigator, Ben Zoghi and Brian Reynolds Co-Principle investigators, 2003, Amount

funded:$18,745.

36. McNaughton and McKay: A Logistics Project. Sponsored by McNaughton and McKay, Principal

Investigator: B. Lawrence, Co-Principal Investigators: B. Zoghi, D. Jennings and B. Reynolds,

2002-2003, Amount funded: $77,187

37. “The Texas A&M Advanced Wireless Telecommunications Initiative”, Sponsored by TITF,

College Station, Texas. Co-Principal Investigators: C. Georghiades, S. Miller, K. Narayanan, E.

Sepedin, X. Wang, Z. Xiong, B. Zoghi, 2001-2004, Amount funded: $700,000.

38. “Design and Development of an Internet-Based Real-Time Monitoring Device”, Sponsored by

Computer House, College Station, Texas. Principal Investigator: B. Zoghi. Spring 2001. Amount

funded: $2,000.

39. “Design of a software package that simulates an ARC”, Sponsored by Advanced Energy, Boulder,

Colorado. Principal Investigator: B. Zoghi. September 200 – May 2001. Amount funded:

$8,600.

40. “Design of DMX512 Controlled Servo Positioning System”, Sponsored by Laser Spectacles, Inc.,

San Marcos, Texas. Principal Investigator: B. Zoghi. Summer 2000. Amount funded: $3,000.

41. “Design of a Rocker Door Slot Vale”, Sponsored by Lam Research, Austin, Texas. Principal

Investigator: B. Zoghi. Fall 2000. Amount funded: $5,000.

42. “Voice Over Network using CDPD”, Sponsored by Lockard & White, Woodland, Texas. Principal

Investigator: B. Zoghi. Fall 2000. Amount funded: $3,000.

43. “Design of a Pulse Width Modulated Pressure Transducer System”, Sponsored by Control Systems

International, Dallas, Texas. Principal Investigator: B. Zoghi. Spring 2000. Amount funded:

$4,600.

44. “Development of an Intelligent Universal Communication System Interface with the AE High

Voltage Power Supply,” Sponsored by Advanced Energy, Boulder, Colorado. Principal

Investigator: B. Zoghi. Spring 1999. Amount funded: $5,000.

45. “Design of a Database Software Application”, Sponsored by Underhill & Associates, Tulsa,

Oklahoma. Principal Investigator: B. Zoghi. Spring 1999. Amount funded: $5,000.

46. “Design of Security Card Reader Format Converter”, Sponsored by Control Systems International,

Dallas, Texas. Principal Investigator: B. Zoghi. Spring 1999. Amount funded: $5,000.

47. Development of an Intelligent DeviceNet Network Monitoring Device. Sponsored by: Applied

Materials, Austin, TX. Principal Investigator: B. Zoghi. Spring 1997. Amount funded: $20,000.

48. Development of a DeviceNet-based Interface for Dynamic Wafer Exchange, Control and Monitor

of a RF and a Light Tower. Sponsored by: Applied Materials, Santa Clara, CA. Principal

49. Investigator: B. Zoghi. Fall 1996. Amount funded: $100,000.

50. Development of a DeviceNet-based intelligent real-time control and communication system.

Sponsored by: Applied Materials, Santa Clara, CA. Principal Investigator: B. Zoghi, Co-Principal

Investigator: G. Wright. Fall 1996. Amount funded: $133,840.

51. Automation of a Data-Based Product. Sponsored by: Applied Materials, Santa Clara, CA.

Principal Investigator: B. Zoghi., Fall 1996. Amount funded: $5,000.

52. VHP Dual Blade Robot Control System. Sponsored by: Applied Materials, Santa Clara, CA.

Principal Investigator: B. Zoghi. Spring 1996. Amount funded: $5,000.

53. Design of a Data-Based Query System for New Product. Sponsored by Applied Materials, Santa

Clara, CA. Principal Investigator: B. Zoghi, Fall 1996. Amount funded: $5,000.

54. Design of an Encoder Feedback System for VHP Dual Blade Robot. Sponsored by Applied

Materials, Santa Clara, CA. Principal Investigator: B. Zoghi, Fall 1995. Amount funded: $5,000.

55. Automation of Physical Vapor Deposition Chamber Bake-out Process. Sponsored by Applied

Materials, Austin, TX. Principal Investigator: B. Zoghi, Fall 1995. Amount funded: $5,000.

56. PC-Based Visible Light Computed Tomography Scanner. Sponsored by: R.P. Kincheloe

Company, Dallas, Texas. Principal Investigator: B. Zoghi. September – December 1992. Amount

funded: $2,200.

57. Medical Imaging Technology Course Development. Sponsored by: R.P. Kincheloe Company,

Dallas, Texas. Principal Investigator: B. Zoghi. September – December 1992. Amount funded:

$20,000.

58. Network-Based Continuous Air Monitor System. Sponsored by: Los Alamos National Laboratory, Los

Alamos, New Mexico. Principal Investigator: A. B. Grubbs, Co-Principal Investigators: G. Wright and

B. Zoghi. Two graduate students supported. March 1991 – August 1991. Amount funded: $67,128.

59. A Multichannel Analyzer for Continuous Air Monitoring. Sponsored by: Los Alamos National

Laboratory, Los Alamos, New Mexico. Principal Investigator: A. B. Grubbs, Co - Principal

Investigators: S. Majdi, G. Wright, B. Zoghi. Seven graduate students supported. May 1990 –

December 1990. Amount funded: $174,552.

60. Packaging of a Telemetric Unit for ICP Measurements. Sponsored by: National Science Foundation,

Texas Engineering Experiment Station, TATU. Principal Investigator: Melissa Guess, Co-Principal

Investigator: B. Zoghi. Summer 1992. Amount funded: $2,500.

61. Hardware and Software Design of a Director for Optical Fiber Intracranial Pressure Sensor System.

National Science Foundation, Texas Engineering Experiment Station, TATU. Principal Investigator:

Dianne R. Balcerak, Co-Principal Investigator: B. Zoghi. Summer 1990. Amount funded: $2,000.

62. PC-Based Visible Light Computed Tomography Scanner. Sponsored by: the Center for Teaching

Excellence, TAMU, College Station, TX. Principal Investigator: B. Zoghi. Summer1992. Amount

funded: $1,000.

63. Fiber Optic Pressure Sensor for Medical Applications. Sponsored by: Office of University Research,

TAMU, College Station, TX. Principal Investigator: B. Zoghi. Spring 1990. Amount funded: $965.

64. Design of a Scientific Experiment to Evaluate Traffic Sensors. Sponsored by: Texas

Transportation Institute, TAMU, College Station, TX. . Principal Investigator: B. Zoghi. Summer

1988. Amount funded: $4,500.

Educational Development

1. Engineering Leadership Initiative, Sponsor by: Hisco Principal Investigator: Ben Zoghi Fall 2006,

Amount funded: $5,000.00

2. Supply Chain Information Systems Laboratory: Connecting the Supply Chain,” software license,

and training $80,290 one-time and $251,070 annually (5 Years) in upgrades, service, and support

(total: $1,335,640). Sponsor by: Siemens Energy and Automation. Principal Investigator: F.

Barry Lawrence, Ben Zoghi Co-Principal Investigators: Daniel Jennings, 2001-2005, Amount

funded: $1,335,640.00

3. Industrial Communication and Control: DeviceNet and Enhancement to Control Laboratory.

Sponsored by: Rockwell Automation. Principal Investigator: B. Zoghi. Fall 1999. Amount

funded: $125,000.00

4. Development of a Semiconductor Manufacturing Engineering Technology Emphasis. Sponsored

by: Applied Materials. Principal Investigator: B. Zoghi. Fall 1997-2001. Amount funded:

$314,525.0

5. Matching the Developmental Process for a Vacuum Technology Laboratory. Sponsored by: MKS

Instruments. Principal Investigator: B. Zoghi, Fall 1997. Amount funded: $70,000.00

6. Development of a Design of Experiment and Statistical Process Control (OE/SPC), Vacuum

technology Lab. Sponsored by: Applied Materials, Santa Clara, CA. Principal Investigator: B.

Zoghi. Fall 1997. Amount funded: $40,000.00

7. Development of a Semiconductor Process Technology Program. Sponsored by: Applied

Materials, Santa Clara, CA. Principal Investigator: B. Zoghi. Fall 1996. Amount funded:

$20,000.00

White Papers: 1. White Paper: An Introduction To Successful Deployment of Radio Frequency Identification in the

Petroleum Industry, Konrad Konarski, Sam Falsafi, Ben Zoghi, Fall 2008.

2. A Business Case for RFID in the Oil & Gas Industry, Konrad Konarski, Sam Falsafi, Ben Zoghi, Fall

2008.

3. White Paper: Radio Frequency Identification In Maintenance, Repair and Operation of Flange Based

Pressurized Systems, Sam Falsafi, Konrad Konarski, Ben Zoghi, Spring 2009.

4. White Paper: Implementing Wireless & RFID Technology in the Oil Field - A cost saving decision in

times of economic downturn, Konrad Konarski, Sam Falsafi, Ben Zoghi, Paul Younan, Spring 2009.

Press Release:

1. Oil & Gas RFID Solution Group Consortium Brings Next Generation Wireless Technology to the

Petroleum Industry, 2009.

2. Petroleum Industry turns to Texas for Radio Frequency Identification (RFID), Houston, Texas, 2008.

JOURNAL PUBLICATIONS:

1. Chi, T., Zoghi, B., “RFID and IEEE 802.11b/Bluetooth Coexistence Using the Interference

Avoidance Scheme,” International Journal of Automatic Identification, (2013 Fall - Accepted for

publication).

2. Zoghi, B., Wagner, D., Akram, F., Li, J., “Smart Checkpost: A Novel Integrated Standalone

Automated RFID/Sensor Solution,” International Journal of Automatic Identification, July-

December 2012.

3. Smith, A., King, R., Zoghi, B., Arnett, C., “Golden-I RFID Ware-House project,” International

Journal of Modern Engineering, Spring 2012. (Accepted)

4. Zhan, W., McDermott,M., Zoghi, B., Hasan, M., “Requirement Development for Electrical

Vehicles Using Simulation Tools,” World Congress on Engineering and Computer Science, San

Francisco, October 20-22, 2009.

5. Zoghi, B., “RFID Throughout the Oil & Gas Supply Chain,” LOG.Middle East's January 2009.

6. Zoghi, B., “Mixing RFID and oil creates competitive advantage,” Oil&Gas Journal, Volume 106.27,

July, 2008.

7. Gupta, M., Zoghi, B., “Future Space Application for RFID and Robots,” RFID Journal, March 2008.

8. Kim, HS, Lawrence, B., Zoghi, B., Clark. N, “The role of reverse Logistics Information System for

Returns Handling Process in an Electronics Distribution Environment,” Review of the Electronic and

Industrial Distribution Industries, Vol. 5, No. 2, 2007.

9. Zoghi, B., Singhal, R., Jung, Y., Fink, R., “RFID Solutions: Parking Optimization and Customer

Satisfaction,” International Journal of Modern Engineering, Vol 7, No. 1, Fall 2006.

10. Ishfag, R., Zoghi, B., “Paradigm Shift in Wholesale Distribution-A Management Perspective” submitted to

International Journal of Operations and Production Management, June 2006.

11. Stone, C., Garcia, R., Lujan, A., Zoghi, B., Singhal, R. “RFID Solutions: The Custom Specialty

Garment industry”, RFID Journal, January 2006.

12. Hornback, G., Babu, A., Martin, B., Zoghi, B., Singhal, R., “Automatic Attendance System”, RFID

Journal, January 2006.

13. Raman, B., Zoghi, B., “Strategy-based Intelligent Tutoring System: Intelligent Advisor,” ITHET

2003, 4th International Conference on Information Technology Based, in collaboration with IEEE

Education Society, 7-9 July 2003, Marrakech, Morocco.

14. Lawrence F. Barry, Thompson, S., Zoghi, B., Nagarathnam, B., “Agility to Market: Variable

Resource Management for the Electronics Industry,” Review of the Electronic and Industrial

Distribution Industries, Vol. 2, No. 1, Pg. 45-54, 2003.

15. Lyster, T., Zoghi, B., “New Technical Laboratory Curriculum Initiatives Part One: Functional

Framework of a Paperless System,” ASEE Annual Conference, 2003.

16. Bolton, B., Zoghi, B., “Enhancing System Dynamics Instruction for Technologists With

Simulation,” ASEE Annual Conference, 2003.

17. Lawrence, B., Zoghi, B., Krishnamurthi R., “Value Of The Distributor In The Evolving Supply

Chain,” Review of the Electronic and Industrial Distribution Industries, Vol. 1, No. 1, Pg. 1-23,

2002.

18. Porter J.R., Morgan, J., Zoghi, B., “Integrating Project Management in to the Capstone Senior Design

Course,” 2002 American Society for Engineering Education Annual Conference, Montreal, Canada,

June 16-19, 2002.

19. Fletcher, B.L., Kemp, J.A., Warren, M.R., Porter, J.R., Zoghi, B., “A Low-Cost Embedded Control

Tester for Teaching Mixed Signal Test Concepts,” American Society for Engineering Education/Gulf

Southwest Annual Conference, College Station, March 29-31, 2001.

20. Honea, S., Konneing, G., Laudermilk, N., Mooring, B., Zoghi, B., “Slot Valve ‘Rocker Door’

Controller using Microcontroller and Lonworks Technology,” American Society for Engineering

Education/Gulf Southwest Annual Conference, College Station, March 29-31, 2001.

21. Celis, J, Gould J., Vaughn, K., Fink, R., Zoghi, B., “Characterization of a Coherent

Undersampling Digitizer," American Society for Engineering Education/Gulf Southwest Annual

Conference, College Station, March 29-31, 2001.

22. Zoghi, B., Bolton, B., Eftekhari, K., Lagoudas, M., “An Innovative Industry-Sponsored

Semiconductor Initiative,” IEEE Frontiers in Education Conference Proceedings, November 1999.

23. Bolton, B., Zoghi, B., “A Non-Traditional Course in Electromechanical Systems for Engineering

Technologists,” IEEE Frontiers in Education Conference Proceedings, November 1999.

24. Martinez, D., Zoghi, B., “Embedded Real-Time Controls Through Application,” IEEE Frontiers in

Education Conference Proceedings, November 1999.

25. Zoghi, B., Daftarian, A., “A Cost-Effective Computer Controlled Theatrical Lighting System,”

Computers in Education Journal of ASEE, Vol. IX, No. 4, October-December 1999.

26. Zoghi, B., Zoghi, B. (brother), “PC-Based Visible Light Computed Tomography Scanner,”

Computers in Education Journal of ASEE, Vol. IX, No. 3, July-September 1999.

27. Villarreal, S., Wynn, C., Zoghi, B., “Web-Based Tutorials Emphasizing Computer-Animated

Simulations,” Computers in Education Journal of ASEE. Accepted for publication in the fourth

issue (October-December) of 1999.

28. Zoghi, B., “PC-Based Computer Controlled Curing Chamber,” Computers in Education Journal

of ASEE, Vol. IX, No. 2, April-June 1999.

29. Zoghi, B., Rouse, R., Camacho, M., Morgan, J., “Real-Time Control via the Internet,” Computers

in Education Journal of ASEE, Vol. VIII, No. 2, April-June 1999.

30. Zoghi, B., Zoghi, B. (brother), Belew, M., “Advanced Remote Medical Monitoring System,”

Computers in Education Journal of ASEE, Vol. 1X, No. 1, January-March 1999.

31. Zoghi, B., Rouse, R., Camacho, M., Morgan, J., “Real-Time Control via the Internet,” Computers in

Education Journal of ASEE, Accepted for publication in the second issue (April-June) 1999.

32. Coté, G., Durai, R., Zoghi, B., “Nonlinear Closed-Loop Control System for Intracranial Pressure

Regulation,” Annals of Biomedical Engineering, Vol. 23, 1995.

33. Zoghi, B., Lyster, T., Puckett, R.E., “Voltage Maps Simplify Electric Circuit Analysis,” IEEE

Southeastcon, May, 1994.

34. Zoghi, B., “Principles of Medical Imaging,” (Book review) Annals of Biomedical Engineering, Vol.

21, pp. 563-568, 1993.

35. Grubbs, A.B., Jr., Zoghi, B., “Overview of a Capstone Project Prerequisite Course,” Int. J. Engng Ed.,

Vol. 9, No. 3, pp. 386-390, December 1993.

36. Zoghi, B., Puckett, R.E., “Portable Data Acquisition System for Exotic Animal Studies,”

Computers in Education Journal of ASEE, Vol. III, No. 1, January - March 1993.

37. Zoghi, B, Munnerlyn, J., “Anesthetic Flow Control System,” Computers in Education Journal of

ASEE, Vol. II, No. 4, October - December 1992.

38. Zoghi, B., Turk, J., “Personal Computer Based Voice Activated Bus Mouse for Paraplegics,”

Computers in Education Journal of ASEE, July 1992.

39. Zoghi, B., Puckett, R.E., “Development of a Low-Cost Personal Computer Based Instrumentation

for Instruction,” Computers in Education Journal of ASEE, Vol. II, No. 2, April - June 1992.

40. Zoghi, B., Lee, Y., and Nelson, D.C., “A Low-Cost Multi-Channel Analyzer with Data Reduction

Assembly for Continuous Air Monitoring System,” IEEE Transactions on Nuclear Science, Vol.

39, No. 2, Part II, April 1992.

41. Zoghi, B., Munnerlyn, J., “Anesthetic Flow Control System,” Computers in Education Journal of

ASEE, February 1992.

Conferences

42. Zoghi, B., King, P, Mobley, C., “RFID Inventory Monitoring and Control within the Engineering

Technology Department at a Major University,” Under preparation, for Computers in Education

Journal of ASEE, March 2011.

43. Zoghi, B., Ghercioiu, M., “Industrial Applications of Wi-Fi Tags coupled with Sensors,” CIEC,

San Antonio, February 2011.

44. Zoghi, B., Linke, P., Peddy, R., Taylor, D., “Using RFID to provide higher level of safety for

Fire Fighters, CIEC, Palm Spring, Feb, 2010.

45. Zoghi, B., Abbott, P., “A Lay down Yard Optimization using RFID: A Cost and Time perspective,”

39th ASEE/IEEE Frontiers in Education Conference, FIE, Oct., 2009.

46. Zoghi, B., “RFID-based Intelligent Smart Cabinet for Undergraduate Laboratories,” 39th ASEE/IEEE

Frontiers in Education Conference, FIE, Oct, 2009.

47. Zoghi, B., Hollar, T., Vacakar, T., MacElroy, J., “Innovation in Control Systems Lab: A Low-Cost

Self-Balancing Robot,” IECE, International Congress on Engineering and Computer Education,

March 2009.

48. Beasley, R., Zoghi, B., “Student Design and Development of a Tactile Display with Three

Dimensional Movements,” ASEE National, June, Austin, 2009.

49. Zhan, W., Gourlart, A., Morgan, J., Zoghi, B., Porter, J.,”Development of a Core Element for

Multiple Course Projects,” ASEE National, June, Austin 2009.

50. Eun, D.H., Zoghi, B., Buchanan, W., “Design of a Low-Cost RFID-Sensor emergency Alert

System for Solitary Old Persons,” IECE, International Congress on Engineering and Computer

Education, March 2009.

51. Zoghi, B., Zhan. W., “Control System Project: RFID-Based Access Human Transporter,” ASEE

National, Austin, 2009.

52. Zoghi, B., McKee, B., “RFID-Based Network for Personnel and Mission-Critical Asset Tracking in a

Disaster City®, 2008 Frontiers in Education Conference, New York.

53. Zoghi, B., McGaffin, A., “Networked-Based RFID documentation Tracking Systems,” INFORMS

Southwest Regional Conference, April 18/19, 2008.

54. Zoghi, B. Buchanan, W., “Engineering Leadership: An Experiential Approach using Emotional

Intelligence,” Brazil, International Conference on Engineering and Technology Education

(INTERTECH) 2008.

55. Zoghi, Srininavasan, V., Jampani, P., “3D Visualization of a Warehouse using RFID,” World

Congress on Communication and Arts, Brazil, March 2007.

56. Zoghi, B., Buchanan, W., Porter, J., “RFID/Sensors: Emerging Technologies in Engineering

Technology’, International Conference on Engineering and Computer Education, Brazil, March 2007.

57. Zoghi, B., Ishfag, R., “Succeeding in the Service Business” Journal of Industrial Distribution, Spring

2007.

58. Zoghi, B., Russ Read, Martin Hanssmann, Allan Griebenow, Bob McKee, “RFID and Mesh

Networking for Personnel and Mission-Critical Asset Tracking in a Disaster City®, ASEE National

Conference, June 2007.

59. Zhan, W., Zoghi, B., Fink, R., “Interdisciplinary Training and System Engineering Approach”, ASEE

National Conference, June 2007.

60. Zoghi, B., “Engineering Leadership: An Experiential Approach using Emotional Intelligence’, ASEE

National Conference, June 2007.

61. Zoghi, B., Beaseley, R., Zhan, W., “A thorough hands-on process to implement a RFID System”,

ASEE National Conference, June 2007.

62. Zoghi, B, Fink, R., “A PDA-Based RFID Intelligent System for Orchid Growers and Collectors,”

ASEE National Conference, June 2007.

63. Zoghi, B., Porter, J., Jung, Y., Thompson, S., Fink, Rainer, “Wireless Sensor Monitoring Combined

With RFID Networks,” International Journal of Modern Engineering Conference, June 2006.

64. Fink, R., Jung, Y., Zoghi, B., “Teaching the Significance of Data Correlation in Semiconductor

Testing,” International Journal of Modern Engineering Conference, June 2006.

65. Fink, R., Jung, Y., Zoghi, B., “Measuring the Acoustic Properties of Salt 1600 ft. Below Ground,”

International Journal of Modern Engineering Conference, June 2006.

66. Jung, Y.K., Zoghi, B., Fink, R., Smith, J., “Automated Individual Remote: An Industry Sponsored

Capstone Project,” International Journal of Modern Engineering Conference, June 2006.

67. Porter, J., Wright, G., Morgan, J., Zoghi, B., “The Auto Guitar Tuner: An Example of an Innovative

Capstone Process,” International Journal of Modern Engineering, June 2006.

68. Porter, J., Wright, G., Morgan, J., Zoghi, B., Fink, R., Jung, Y.K., “ Project EVIS: An Example of an

Innovative Capstone Process,” International Journal of Modern Engineering, June 2006.

69. Fink, R., Porter, J., Jung, Y., Zoghi, B., “Mixed-Signal Test Emphasis in Engineering Technology,”

Conference for Industry & Education Collaboration, submitted June 2006.

70. Fink, R., Porter, J., Jung, Y., Zoghi, B., “Test Time-Reduction in Semiconductor testing : An analysis of

University/Industry Interaction,” Conference for Industry & Education Collaboration, submitted June

2006.

71. Fink, R., Porter, J., Jung, Y.K., Zoghi, B., “Mixed-Signal Test Emphasis in Engineering Technology,”

CIEC, June 2006.

72. Kim, S.D., Akhavi, F., Zoghi, B., “Customer Needs Assessment for Developing Fee-based Services,”

Proceedings of the Industrial Distribution Educators Association Conference, Dallas, March 2005.

73. Kim, S.D., Akhavi, F., Zoghi, B., “How to Design New Services using TRIZ” Proceedings of the

Industrial Distribution Educators Association Conference, Dallas, March 2005.

74. Thompson, S., Pappu, M., Zoghi, B., “Auditing of Distribution Centers,” Proceedings of the Industrial

Distribution Educators Association Conference, Dallas, March 2005.

75. Zoghi, B. “Web Integration: Its Future and Application in Value Chain Systems”, The First

International Conference on Information & Knowledge Technology, Tehran, December 30, 2003

76. Zoghi, B., M. Lockard, W. Johnson, M. Fecci, “Voice Over Internet Protocol using CDPD Dynamic

Buffering,” American Society for Engineering Education/Gulf Southwest Annual Conference, Dallas,

March 7-9, 1999.

77. Zoghi, B., Johnson, M., Corliss, S., Foster, J., Isom, D., Sannino, C., Vaughan, A. “The General

Intelligent Mobile Platform Project,” IEEE Instrumentation and measurement, Annual Conference,

2002.

78. Zoghi, B., Tomoki, A., Palermo, A., Peterson, J., Sansom, B., Vaughan, A., “iMonitor: An Intelligent

web-based Network Device” IEEE Instrumentation and measurement, Annual Conference, 2002.

79. Lopez, J., Zoghi, B., Guerra, J., Valdez, R., "Security Video Verification System," American

Society for Engineering Education/Gulf Southwest Annual Conference, Dallas, March 7-9, 1999.

80. Batto, L., Zoghi, B., Bailey, D., Grahmann, D., "Web Based Control Utilizing Embedded Micro

Internetworking Technology,” American Society for Engineering Education/Gulf Southwest

Annual Conference, Dallas, March 7-9, 1999.

81. Zoghi, B., Garcia, E., Morgan, T., Pechal, M., DeviceNet Network Monitoring Device, Technical

Report to Applied Materials, Spring, 1998.

82. Zoghi, B., Villarreal, S., Elkins, S., “A New Semiconductor Manufacturing Program at Texas

A&M University,” Technician Training Workshop, SEMI/SEMATECH, February 1997.

83. LaPoint M., Martir, G., Taylor, G., Zoghi, B., Belew M., “Wireless Multi-Channel Medical

Monitoring System,” ASEE/GSW, 1997.

84. Villaeral, S., Zoghi, B., “A Collaborative Multimedia, Web-Based Electronics Course: Project

Description and Survey,” IEEE Frontiers in Education Conference Proceedings, November 1996.

85. Zoghi, B., Durai, R., “Texas Instruments Field Programmable Gate Array, an Innovative Course,”

ASEE/GSW, March 1994.

86. Zoghi, B., Coté, G., Rastegar, S., “A Telemetric Implantable Optically Based Intracranial Pressure

Measurement System,” pp. 735-745, Proceedings of the Iranian Conference on Electrical

Engineering, May 17-20, 1993.

87. Zoghi, B., Culver, B., “Development of a Medical Imaging Technology Course,” ASEE/GSW

Proceedings, pp. 395-398, April 1993.

88. Zoghi, B., Coté, G., Rastegar, S., “Intracranial Pressure Measurements using an Implantable

Optically based Sensing System,” SPIE Proceeding, Vol. 1641, January 1992.

89. Zoghi, B., Rastegar, S., “Measurement of Intracranial Pressure Utilizing an Implantable Optical

Fiber Pressure Sensor,” Ninth Annual Conference on Bio-medical Engineering Research,

Houston, TX, February 1991. Published abstract.

90. Zoghi, B., Rastegar, S., “Reflective Optical Sensor for Measurement of Intracranial Pressure,”

SPIE Proceeding, Vol. 1420, January 1991.

Technical Reports (Sponsors do not authorize Journal publications)

91. Zoghi, B., Joshi, A., “Design and Implementation of a Real-Time RFID-Based Inventory Management

System for N-Line Traffic Maintenance,” N-Line Inc., Bryan, Texas, December 2009.

92. Zoghi, B., “RFID usage for Construction, Operation and Maintenance of Nuclear Power Plants,” South

Texas Projects, August 2008.

93. Thompson, S., Zoghi, B., “Outsourcing of Manufacturing Management for ELK Corporation,”, Elk,

Dallas, TX, March 2006.

94. Thompson, S., Zoghi, B., “Quality Performance Management Through Survey Decision Diagnostics”,

Photodynamics, San Jose, CA, July 2006.

95. Zoghi, B., Thompson, S., “RFID for Intelligent Warehouse System,” House of Forgings, May 2006.

96. Zoghi, B., “Design of a OCR, RFID and Camera-based intelligent system for Pharmaceutical Industry

Application, LifeStation,” Dec, 2005.

97. Ishfag, R., Zoghi, B., “A Critical Review of Fee-based Services in Wholesale Distribution Industry”,

Industrial Distribution Magazine, September 2005.

98. Ishfag, R., Zoghi, B., “Current Services in Building Supplies Wholesale Industry”, Building-Supplies

Magazine, June 2005.

99. Barrkoh, K., Bradicich, L., Gage, N., Kantana, K., Menchaca, K., Villarreal, D., Zoghi, B., “The

Pharmaceutical Industry: A Comprehensive Study” technical report, submitted to McKesson, December

2002.

100. Cozart, R., Graybeal, M., Hebert, T., Molinar, A., Powers, P., Zoghi, B., “VARTEC Telecom:

Information Technology Trouble Tickets” technical report, submitted to VARTEC, Dallas, December

2002.

101. Guirguis, S., Tietze, B.J., Stewart, S., Ortloft, J., Yates, B., Madison, M., Zoghi, B., “Risk

Management in Inventory Coding: A Study of the Validity of Avnet’s Current Coding System”

technical report, submitted to Avnet, Phoenix, December 2002.

102. Jonsson, A., Born, J., Dickshat, D., Guthrie, R., Mapps, E., Parks, M., Zoghi, B., “Hisco China:

Strengths, Weaknesses, Opportunities, and Threats” technical report, submitted to Hisco, Houston,

December 2002.

103. Adams, C., Arrington, C., Harrell, J., Havelka, C., Purcell, B., Weise, W., Winstead, M., Zoghi,

B., “Marketing Strategies for Supply-Chain Management” technical report, submitted to the Med-

Ox Group, December 2002.

104. Ismail, A., Zoghi, B., “Deployment Assessment And Methodology Of Handheld Computers For

E-Commerce And Enterprise Applications: The Limitations And Strategies For Overcoming Them

Via Wireless Solutions”.

105. Zoghi, B., Lockard M., Johnson, W., Fecci, M., “Voice Over Internet Protocol using CDPD

Dynamic Buffering,” Technical Report to Lockard & White, December 2002.

106. Zoghi, B., R. White, DMX512 Controller Servo Positioning System, Technical Report to Laser

Spectacles, Inc., December 2000.

107.

108. Honea, S., Konneing, G., Laudermilk, N., Zoghi, B., Rocker Door Slot Valve, Technical report

to Lam Research, December 2000.

109. Ali, Y., Fischer, J., Holcomb, H., Zoghi, B., Voice Over Network using CDPD, Technical

Report to Lockard & White, December 2000.

110. Zoghi, B. Learning with LabVIEW Book Review, OUTLOOK, National Instruments Journal,

January 2000.

111. Zoghi, B., Garcia, E., Morgan, T., Pechal, M., DeviceNet Network Monitoring Device,

Technical Report to Applied Materials, Spring, 1998.

112. Zoghi, B., Hoot, S., Marcucci, T., Gotcher, C., Edgar, J., DeviceNet Interface for Dynamic

Wafer Exchange, Technical Report to Applied Materials, Spring, 1997.

113. Zoghi, B., Bell V., Lieberman, M., Sanchex, J., DeviceNet Control and Monitor of a RF

Matching Chamber, Technical Report to Applied Materials, Spring, 1997.

114. Zoghi, B., Klimitchek, D., Mulanax, C., Richard, C., DeviceNet Control and Monitor of a Light

Tower, Technical Report to Applied Materials, Spring, 1997.

115. Zoghi, B., Prindle, J., Burke, A., VHP Dual Blade Robot Control System, Technical Report to

Applied Materials, Spring, 1996.

116. Zoghi, B., Wilburn, D., Copeland, A., Porter, S., Design of an Encoder Feedback System for a

VHP Dual Blade Robot. Technical Report to Applied Materials, December, 1995.

117. Zoghi, B., A Novel Optically Based Approach to Intracranial Pressure Measurement,

Dissertation, Texas A&M University, August 1993.

118. Zoghi, B. and Lorenzo, R., Automated Air Pressure Regulator for Smart Cars, The New School

Shop Tech Directions, July 1992.

119. Lorenzo, R. and Zoghi, B., Data Acquisition and Control using Interrupts, The New School

Shop Tech Directions, July 1992.

120. Zoghi, B., and Lorenzo, R., Data Acquisition and Control Interface, Tech Directions, October

1992.

121. Zoghi, B., Bellubi, R., A Blind Spot Detector for Highway Vehicles, The New School Shop

Tech Directions, Spring 1992.

122. Zoghi, B., Wright, G., Grubbs, A.B., The Continuous Air Monitoring System, Technical report

to Los Alamos National Laboratory, September 1991.

123. Zoghi, B., Lorenzo, R., Data Acquisition and Control Interface, The New School Tech

Directions, October 1992.

124. Zoghi, B., Hardware Design of Continuous Air Monitor, Research Report to Los Alamos

National Laboratory, December 1990.

125. Zoghi, B., Fiber Optic Pressure Sensor for Medical Applications, Technical Report, Office of

University Research, College Station, Texas, November 1990.

126. Zoghi, B., Design of a Scientific Experiment to Evaluate Traffic Sensors, Technical Report,

Texas Transportation Institute, College Station, Texas, September 1988.

127. Grubbs, A.B.; Zoghi, B.; Kruse B., Solid State Devises and Circuits Using Computer-Aided

Engineering, West Publishing Co., 1991.

Professional Development

Leading and Managing with Emotional Intelligence, Halliburton Leadership Development

Program, June, Mays Business School, Center for Executive Development, College Station,

March, 2011.

Leading and Managing with Emotional Intelligence, Halliburton Leadership Development

Program, Mays Business School, Center for Executive Development, College Station, January,

2011.

Leading and Managing with Emotional Intelligence, Bill Blackwood Law Enforcement

Management Institute of Texas, Mays Business School, Center for Executive Development,

College Station, January, 2011.

Leading and Managing with Emotional Intelligence, Bill Blackwood Law Enforcement

Management Institute of Texas, Mays Business School, Center for Executive Development,

College Station, July, 2010.

Leading and Managing with Emotional Intelligence, Bill Blackwood Law Enforcement

Management Institute of Texas, Mays Business School, Center for Executive Development,

College Station, April, 2010.

Leading and Managing with Emotional Intelligence, Bill Blackwood Law Enforcement

Management Institute of Texas, Mays Business School, Center for Executive Development,

College Station, March, 2010.

Leading and Managing with Emotional Intelligence, Halliburton Leadership Development

Program, Mays Business School, Center for Executive Development, College Station,

November, 2010.

Leading and Managing with Emotional Intelligence, Halliburton Presidential Leadership

Excellence Program, Houston, November, 2010.

Leading and Managing with Emotional Intelligence, Hallmark Software Engineering Team,

Houston, October, 2010.

Leading and Managing with Emotional Intelligence, Halliburton Leadership Development

Program, Mays Business School, Center for Executive Development, College Station, August,

2010.

Leading and Managing with Emotional Intelligence, Halliburton Leadership Development

Program, Mays Business School, Center for Executive Development, College Station, May,

2010.

Leading and Managing with Emotional Intelligence, Halliburton Leadership Development

Program, Mays Business School, Center for Executive Development, College Station, March,

2010.

Leading and Managing with Emotional Intelligence, Nov, College Station, $10,000, 2008

Leading and Managing with Emotional Intelligence, May 14-16, Dallas, 2008, $12,000

Leading and Managing with Emotional Intelligence, January 14-16, Austin, 2008, $12,000

Project Management Tools and Techniques, June –July 2006, $10,000

Developing Emotional Intelligence at Workplace, December 2006, $12K

Master’s Certificate in Project Management, January 2007 – May 2007, $130,000

Student Research/Projects Advising:

A. Undergraduate:

Lindsey Jenschke, Richard Horner, Nicholas Reinoso, Cody Lewis,

“Intelligent Animal Tracking System with RFID Technology,” June

2014 – June 2015.

Abe Hernandez, Jose Sotelo, Roberto LaFair,”Robotic Integrated

Systems Command Control and Communication (RISC3),” January

2014 – December 2014

Nick Curley, Adrian Ozer, James Hutzley, Eric Fitzmon, “Smart

Badge,” Capstone Project, January 2013 – December 2013.

Tyler Halbert, Micah Hignight, Justin Lacy, Ruth Mitze, Mechanical

Engineering, “RFID Implementation Proposal for Tracking of

Manufacturing Process at ATI Firth Sterling”, Capstone Project,

August 2012 – May 2013

Shahram Ighbal, Electrical Engineering, Capstone Design Project,

August 2012 – May 2013

Daniel Wagner, Jurvin Li, Akram, Fayaz, , Señor Capstone Project,

January 2010 – February 2011

Archie Wilson, Chris Landry, Kostas Papasideris, Brad Sutter, Fall

2008-Spring 2009

Joseph Christoferson, Jaime Burgoa, Derek Rodriguez, Señor

Capstone Project, Fall 2005-Spring 2006

B. Masters:

Bo Tian, Electrical Engineering, 2016.

Shokoufeh Arbabi, Electrical Engineering, 2014.

Aditya Joshi, Industrial Engineering, Co-Chair, 2009.

Antonarod, Richard, Masters of Industrial Distribution, Chair, 2005.

Baker, Brian, Masters of Industrial Distribution, Chair, 2005.

Baker, Mindy, Masters of Industrial Distribution, Chair, 2005.

Baker, Van, Masters of Industrial Distribution, Chair, 2005.

Bell, James, Masters of Industrial Distribution, Chair, 2005.

Elliott, Stephen, Masters of Industrial Distribution, Chair, 2005.

Estrada, Fernando, Masters of Industrial Distribution, Chair, 2005.

Marroquin, Tegan, Masters of Industrial Distribution, Chair, 2005.

Stith, Halley, Masters of Industrial Distribution, Chair, 2005.

Vu, Dung, Masters of Industrial Distribution, Chair, 2005.

Brown, Chris, Masters of Industrial Distribution, Chair, 2004.

Catchings Jason, Masters of Industrial Distribution, Chair, 2004.

Davis Len, Masters of Industrial Distribution, Chair, 2004.

Fontana John, Masters of Industrial Distribution, Chair, 2004.

Harper Mitch, Masters of Industrial Distribution, Chair, 2004.

Hamlin Todd, Masters of Industrial Distribution, Chair, 2004.

Hayman Bill, Masters of Industrial Distribution, Chair, 2004.

Herrera Carol, Masters of Industrial Distribution, Chair, 2004.

Jennings Steve, Masters of Industrial Distribution, Chair, 2004.

Mitchell Nathan, Masters of Industrial Distribution, Chair, 2004.

Myers Bryan, Masters of Industrial Distribution, Chair, 2004.

Sharp Tim, Masters of Industrial Distribution, Chair, 2004.

Thode Keith, Masters of Industrial Distribution, Chair, 2004.

Williams Tate, Masters of Industrial Distribution, Chair, 2004.

Claudia Mayasari, Industrial Engineering, Member, 2003.

Borsh, Robert, Masters of Industrial Distribution, Chair, 2003.

Edlin, Craig, Masters of Industrial Distribution, Chair, 2003.

Elliott, John, Masters of Industrial Distribution, Chair, 2003.

Evans, Phillip, Masters of Industrial Distribution, Chair, 2003.

Germano, Charles Masters of Industrial Distribution, Chair, 2003.

Harvey, Gary, Masters of Industrial Distribution, Chair, 2003.

Hinchman, Daniel, Masters of Industrial Distribution, Chair, 2003.

Segura, Brandon, Masters of Industrial Distribution, Chair, 2003.

Ratner, Harold, Masters of Industrial Distribution, Chair, 2003.

Scott, John, Masters of Industrial Distribution, Chair, 2003.

Claudia Mayasari, Industrial Engineering, Member, 2003.

Amer Ismail, Industrial Engineering, Member, December 2001.

Richard A. Welch, “Static Power Conversion Technique for Utilizing

Unique Energy Sources,” Electrical Engineering, August 1998.

Karen J. Slater, “Application Aspect of 12 and 24 Pulse Rectifiers for

Adjustable Speed Drives,” Electrical Engineering, August 1998.

Afshin Shaybani, “Implementation of a Multi-Carrier Modulation based

Modem on the TI TMS320C54 DSP,” Electrical Engineering, June 1998.

Daud Omar, “Lateral Control of Articulated Vehicles for Automated

Highway Systems under Uncertainty in Vehicle Parameters,” Mechanical

Engineering, June 1998.

Manish J. Patel, “Efficient Computation of Morphological Texture

Features,” Electrical Engineering, May 1998.

C. Doctorate:

Alireza P. Saghati, Electrical Engineering, 2015

Negar Rashidi, Electrical Engineering, 2011-2014

Eddy Aeloiza, Electrical Engineering, 2009-2012

Jaeyoung (Jake) Lee, Electrical Engineering, 2009-2013.

Cuong Huynh, Electrical Engineering, 2010-2012

Babak Fahimi, Electrical Engineering, 2008-2012

Ali Eskandari, Electrical Engineering, 2007 – 2011

Amitava Biswas, Computer Science, 2007-1010

Barani Raman, Computer Science, Committee Member, 2005

Jayaraman, Sachindranath PhD Math, GCR, 2007

Michael Keith Wilkerson, Kinesiology, GCR, 2002

Jeff McDougall, Electrical Engineering, Member, 2003

In-Sun Shim, Education Human Resource Development, GCR 2001

Michael Keith Wilkerson, Kinesiology, GCR, 2002

Jeff McDougall, Electrical Engineering, Member, 2003.

Bill Fox, Rangeland Ecology & Management, GCR, 1998

Michael Keith Wilkerson, Kinesiology, GCR, 2002

GRANTS:

NSF grant to participate in a workshop on “Semiconductor Manufacturing Training Workshop,”

Albuquerque TVI, New Mexico, January 5-9, 1998.

Applied Materials grant to participate in a short course on "Design of Experiments," Santa Clara,

CA, June 12, 1997.

Applied Materials grant to participate in a short course on "Microelectronics Fabrication," Austin,

Texas May 29 - June 2, 1997.

Motorola grant to participated in a short course on “ANSI C for Embedded Systems,” Ann Arbor,

MI, December 10-13, 1996.

Motorola grant to participate in a short course on "68332 Microcontrollers," Phoenix, AZ August

19-26, 1996.

Applied Materials grant to participate in a short course on “Semiconductor System Functionality”,

Santa Clara, CA. May 29 - June 2, 1995.

Texas Instruments grant to participate in a short course on “Field Programmable Gate Array

(FPGA) Technology”, Dallas, TX. July 10-13, 1994.

Motorola grant to participate in a short course on “DSP56000/1 Microprocessor”, Phoenix, AZ.

August 19-26, 1994.

ASEE grant to participate in the National Teaching Effectiveness Institute, Toledo, Ohio. June 25-

28, 1992.

Radiological Society of North America (RSNA) grant to participate in a short course on

“Diagnostic Imaging Techniques,” Chicago, III. December 5-9, 1991.

Phillips Medical System grant to participate in a short course on “The Basics of X-ray Imaging,”

Sacramento, CA. August 11-13, 1991.

Instrument Society of America the 37th International Instrumentation Symposium grant to

participate in a short course on “Instrumentation and Testing,” San Diego, CA. May 5-9, 1991.

ASEE grant to participate in a short course on “Microprocessor-Based Mechanical Systems,”

University of California, Berkeley, CA. January 7-15, 1991.

Motorola grant to participated in a short course on “Microcontroller 68HC11 for Applications,”

Austin, TX. June 5-8, 1990.

NSF grant to participate ASEE, course "Microprocessor-Based Mechanical System," University of

California, Berkeley, California, Spring 1991.

NSF grant to participate ASEE, course "Lasers and Optics for Applications," Massachusetts

Institute of Technology, Cambridge, Massachusetts, Summer 1989.

NSF grant to participate ASEE, course "Engineering Workstations," Rice University, Houston,

Texas, Summer 1988.

Faculty grant from ECF, (Eastern Communication Forum) to attend ECF, Washington, DC, 1989.

Faculty grant from NCF, (National Communication Forum) to attend NCF, Chicago, Illinois,

1988.

NSF/ASEE grant to attend the Design Automation Conference, Anaheim, California, 1988.

PRESENTATIONS:

Zoghi, B., invited speaker, “RFID in Oil and Gas 101,”RFID Journal Annual Conference,

Orlando, April 2010.

Zoghi, B., RFID Oil and Gas Panel Moderator, “RFID: Tracking the Rig, Vessels and People,”

Offshore Communication, November 2009.

Zoghi, invited speaker, Oil and Gas Standards Development, Oracle OpenWorld Annual

Conference, San Francisco, Oct 2009.

Zoghi, B., Game Changer, next Generation of Technology, CTO’s office at BP, Houston, Texas,

Jan 2010

Zoghi, B., invited speaker, “What got you in, will not get you there,” SKEE Week, Student

organization, Feb., 2009.

Zoghi, Keynote, Tracking Savings: Active RFID in Construction, RFID Journal Middle East, Jan

5-7, Dubai, 2009.

Zoghi, Keynote, RFID Standards for the Oil and Gas Industry, RFID Journal Middle East, Jan 5-7,

Dubai, 2009.

Zoghi, B., Leading in a Turbulence times, AWC, Houston, Nov 2008.

Zoghi, B., Keynote, RFID Trace and Track Application for Oil Field Drill Pipes Manufacturer,

ARAB RFID, Dubai, October 2008.

Zoghi, B., RFID in Oil & Gas, ARAB RFID, Dubai, October 2008.

Zoghi, B., RFID Panel Discussion, RFID Future and how it plays in Middle East, ARAB RFID,

Dubai, October 2008.

Zoghi, B., Engineering Emotional Intelligence Seminar, College of Engineering Space

Engineering Initiative (SEI), spring 2008.

Zoghi, B., Creativity and creation via Emotional Intelligence, Keynote, University Advisors and

Counselors, 2008 Symposium.

Zoghi, B., Engineering Emotional Intelligence workshop, College of Engineering Freshmen, Fall

2007.

Zoghi, B., Emotional Intelligence for Project Managers, Keynote, Annual Project Management

Conference, Houston, Texas, Fall 2007.

Zoghi, B., Engineering Emotional Intelligence workshop, College of Engineering Freshmen, Fall

2006.

Zoghi, B., Emotional Intelligence for Public Service Leadership,” Workshop II, George Bush

School of Government and Public Services, spring 2006

Zoghi, B., Emotional Intelligence for Public Service Leadership,” Workshop I, George Bush

School of Government and Public Services, spring 2006

Zoghi, B. “Leading Industrial Sales Team”, Thomas and Joan Read Center for Distribution

Research and Education Seminar, January 24, 2005

Zoghi, B., Impact of Emotional Intelligence for Cross-Cultural Leadership, Symposium on Cross

Cultural Leadership: International University of Monaco, June 2005

Zoghi, B. “Enhancing Distributor Profitability”, Building Supplier Corporation, Thomas and Joan

Read Center for Distribution Research and Education Seminar, December 9, 2004

Zoghi, B. “Leadership”, Association of Equipment Distributors, Thomas and Joan Read Center for

Distribution Research and Education Seminar, November 15, 2004

Zoghi, B. “Leading Positive Change”, Building Supplier Corporation, Thomas and Joan Read

Center for Distribution Research and Education Seminar, November 15, 2004

Zoghi, B. “Effective Negotiations”, CDM2 in York University, Canada, August 17, 2004

Zoghi, B. “Leading the Sales Team – Emotional, Intelligence Leadership Styles”, CDM2 in York

University, Canada, August 16, 2004

Zoghi, B. “Principles of Distributor Profitability”, CDM1 in York University, Canada, July 12,

2004

Zoghi, B. “Improving Distribution Profitability”, Thomas and Joan Read Center for Distribution

Research and Education Seminar, January 12, 2004

Zoghi, B. “Distribution Profitability”, Thomas and Joan Read Center for Distribution Research

and Education Seminar, December 15, 2003

Zoghi, B. “Leadership Development”, Thomas and Joan Read Center for Distribution Research

and Education Seminar, December 2, 2003

Zoghi, B. “Leadership Styles”, Thomas and Joan Read Center for Distribution Research and

Education Seminar, November 3, 2003

Zoghi, B. “Leading Business with Emotional Intelligence”, Thomas and Joan Read Center for

Distribution Research and Education Seminar, November 3, 2003

Zoghi, B. “Financial Transactions of Industrial Distribution”, Thomas and Joan Read Center for

Distribution Research and Education Seminar, October 6, 2003

Zoghi, B. “Leadership Development”, Thomas and Joan Read Center for Distribution Research

and Education Seminar, October 6, 2003

Zoghi, B. “Improving Distribution Profitability”, Thomas and Joan Read Center for Distribution

Research and Education Seminar, April 1, 2003

Zoghi, B. “Introduction to Financial Management”, Thomas and Joan Read Center for

Distribution Research and Education Seminar, March 31, 2003

Zoghi, B. “Understanding & Improving Supply Chain Relationship”, Thomas and Joan Read

Center for Distribution Research and Education Seminar, March 21, 2003

Zoghi, B. “Effective Leadership”, Thomas and Joan Read Center for Distribution Research and

Education Seminar, February 17, 2003

Zoghi, B. “Effective Negotiations”, Thomas and Joan Read Center for Distribution Research and

Education Seminar, January 28, 2003

Zoghi, B. “Effective Leadership in Distribution”, Thomas and Joan Read Center for Distribution

Research and Education Seminar, January 27, 2003

Zoghi, B. “Sales Leadership”, Thomas and Joan Read Center for Distribution Research and

Education Seminar, November 4, 2002

Zoghi, B. “Managing and Improving Profitability Part One: Fundamentals”, Thomas and Joan

Read Center for Distribution Research and Education Seminar, November 4, 2002

Zoghi, B. “Inventory Management Case Study: Ray Distributing”, Thomas and Joan Read Center

for Distribution Research and Education Seminar, October 18, 2002

Zoghi, B. “Inventory Management Case Study: My Plumbing Supply”, Thomas and Joan Read

Center for Distribution Research and Education Seminar, August 9, 2002

Zoghi, B. “Effective Negotiations”, Thomas and Joan Read Center for Distribution Research and

Education Seminar, June 28, 2002

Zoghi, B., “Development of a Semiconductor Manufacturing Engineering Technology at Texas

A&M,” Applied Materials Corporate Division, Santa Clara, CA, April 30, 1998.

Zoghi, B.,”Panel Discussion on the 2+2 articulation Program,” Third Annual Conference,

Advanced Technology Education in Semiconductor Manufacturing,” July 29-August 1, 1997.

Zoghi, B., “Semiconductor Manufacturing Education at Texas A&M,” Corporate Division of

Applied Materials, October 15-16, 1997.

Zoghi, B.”A Progress Report on Semiconductor Manufacturing Program at Texas A&M,” Annual

TASET Meeting. September 1997.

Zoghi, B., “Semiconductor Manufacturing Technology Program,” SEMATECH &

SEMI/SEMATECH, Austin, Texas, February 3-4, 1997.

Zoghi, B., “The Role of Honor Students in the Society,” Engineering Technology Department,

University of North Texas, Spring 1996.

Zoghi B., “To Be or Not To Be a Summer Industry Professor,” to Engineering Technology

Department, University of North Texas, November 27, 1996.

Zoghi, B., Lyster, T., Puckett, R. E., "Voltage Maps Simplify Electric Circuit Analysis,"

IEEE Southeastcon, Miami, FL May 19-15, 1994.

Zoghi, B., Culver, B., "Development of a Medical Imaging Technology Program," to Gulf-

Southwest Section of ASEE, Austin, Texas, April 2, 1993.

Zoghi, B., "Development of a Medical Imaging Technology Course," to Industry/University

Relations, ASEE, Toledo, Ohio, June 23, 1992.

Zoghi, B., "A New Technical Elective on Medical Imaging Technology," to Biomedical Equipment

Technology at Texas State Technical College, Waco, Texas, November 1, 1991.

Zoghi, B., "Technical Content of Medical Imaging Technology Course," to technical staff of R.P.

Kincheloe, Houston, Texas, October 25, 1991.

Zoghi, B., "Reflective Optical Sensor for Measurement of Intracranial Pressure," Ninth Annual

Conference on Biomedical Engineering Research in Houston, University of Houston, Texas,

February 7-8, 1991.

Zoghi, B., "Measurement of Intracranial Pressure Utilizing an Implantable Optical Fiber Pressure

Sensor," Bioengineering Seminars, Texas A&M University, February 1, 1991.

Zoghi, B. "Optical Fiber Sensors for Medical Applications," Bioengineering Laser Group, Texas

A&M University, November 1990.

Zoghi, B. "Role of Honor Society in Engineering Technology," Engineering Technology

Department, University of Houston, Houston, Texas, Fall 1990.

EDITORIAL:

North American Editor for the Chinese Journal of Technology and Management, 2005 – present.

Edited Journal papers for the Journal of Automation in Construction, March 2007.

Board of Directors (2014-2017) – ASEE-CIPD (College-Industry Partnership Division

Board of Directors (2014-2017) - IAJC/ISAM (International Association of Journals &

Conferences/International Society of Agile Manufacturing)

HONORS:

University Level Association of Former Students' Distinguished Achievement Award in Teaching,

2008

Tau Alpha Pi, National Engineering Technology Honor Society, Faculty Advisor, 1990- Present

Motorola Faculty Fellow, College of Engineering, Texas A&M University, April 1998.

Association of Former Students Distinguished Teaching Award, Texas A&M University, September 1994.

Member of Sigma Xi Research Society, Spring 1994.

Elected as Senior Member of the Institute of Electrical and Electronics Engineers, Summer 1992.

Associate Member of Sigma Xi Research Society, Spring 1992.

Listed in Who's Who of Emerging Leaders in America," 1992.

"Who's Who in the Dictionary of International Biography," Cambridge, England.

Chapter Advisor for Tau Alpha Pi, the National Honor Society for Engineering Technology.

Academic Excellence Award for 1990-1991, Texas A&M University.

Listed in "Who's Who Among American Professionals," 1992.

Listed in "Who's Who in the South and Southwest," 1990.

Member of Alpha Eta Mu Beta, the National Bioengineering Honor Society.

Member of the Tau Alpha Pi, the National Engineering Technology Honor Society.

Member of Tau Beta Pi, the National Engineering Honor Society.

The 1980 Engineering Student Scholarship Award in the Division of Science and Mathematics

from Peter Kiewits Son's Company, Seattle Central College.

SCIENTIFIC AND PROFESSIONAL SOCIETIES:

Institute of Electrical and Electronics Engineers. (IEEE)

American Society of Engineering Education. (ASEE)

IEEE Lasers and Electro-Optics Society. (IEEE)

The International Society for Optical Engineering. (ISOE)

American Association for the Advancement of Science. (AAAS)

Society of Photo-Instrumentation Engineers. (SPIE)

Sigma Xi

Tau Alpha Pi Honor Society

Tau Beta Pi Honor Society

International Leadership Association (ILA)

University and Community Services

Chair, ETID Post=Tenure Committee, 2014 – Present.

Member, College of Engineering Awards Committee, 2012-2014.

Member, ETID Departmental Growth Committee. January 2013 – 2014.

Chairman of EET/TET Curriculum Committee Vision 2015, Fall 2010-2012.

Zoghi, B., Engineering Emotional Intelligence workshop, College of Engineering Freshmen, Fall

and Spring 2009, 2010, 2011, 2012, 2013.

Zoghi, B., Leading in a Turbulence times, AWC, Houston, Nov 2008.

Zoghi, B., Keynote, RFID Trace and Track Application for Oil Field Drill Pipes Manufacturer,

ARAB RFID, Dubai, October 2008.

Zoghi, B., RFID in Oil & Gas, ARAB RFID, Dubai, October 2008.

Zoghi, B., RFID Panel Discussion, RFID Future and how it plays in Middle East, ARAB RFID,

Dubai, October 2008.

Zoghi, B., Engineering Emotional Intelligence Seminar, College of Engineering Space

Engineering Initiative (SEI), spring 2008.

Zoghi, B., Creativity and creation via Emotional Intelligence, Keynote, University Advisors and

Counselors, 2008 Symposium.

Zoghi, B., Engineering Emotional Intelligence workshop, College of Engineering Freshmen, Fall

2007.

New Associate Director of ERC-NSF Proposal, a major research center initiative in the College of

Engineering, January 2010 – Present.

Curriculum Committee Change Evaluation, Chair, Feb 2010 – August 2010

Member, College of Engineering Tenure & Promotion, 2008 -2010.

Presentation to minority students on Leadership, Fall 2009

Zoghi, B., Engineering Emotional Intelligence workshop, College of Engineering Freshmen, Fall

2009.

Zoghi, B., Engineering Emotional Intelligence workshop, College of Engineering Freshmen,

Spring 2009.

Presentation to SKEE Week, Student organization, Feb., 2009

Invited presentation to American Women Computing (AWC) Group on Houston, on Leading in a

Turbulence times, Nov 2008.

Zoghi, B., Engineering Emotional Intelligence workshop, College of Engineering Freshmen, Fall

2008.

Member, ETID Tenure & Promotion, 2007-present.

Offering the short course to the Student Leadership services on the 7 Habits of Highly Effective

People, Spring 2008, fall 2008.

Faculty sponsor, Texas A&M Solar Decathlon National Competition,

http://archone.tamu.edu/solardecathlon/team.htm , Fall 2006 - Spring 2008.

Mentor to ETID and Aero and Computer Science Junior Faculty. 2005 – present

Member of Organizing Committee, Symposium on Cross-Cultural Leadership: International

University of Monaco, June 2005

Member of Board of Director, Hisco Electronics Distribution, Houston, 2004-2006

Member of College of Engineering Chair Professors, 2002- 2005

Member, Departmental Strategic Planning Committee, Spring 1998-present.

Chairman, Engineering Technology Tenure and Promotion Peer Review Committee, 1994-2005.

TAMU Graduate Faculty, 1993-present.

Represented Department at University commencement ceremonies, 1990-2005.

Member, Search Advisory Committee meeting for the Vice Chancellor and Dean position of the

Dwight Look College of Engineering and Director, Texas Engineering Experiment Station, 2001-

2002.

Engineering Technology Departmental representative on the College of Engineering Tenure and

Promotion Peer review Committee, 2000-2002.

Chairman, ETID Tenure & Promotion Chair, 2000-2002.

Chairman, Engineering Technology social committee, 2000-2001

Member, ETID Scholarship Committee, Spring 2001.

Reviewer of IEEE Sensors Journal, “Real-Time Observation System for Tele-Micro-Operation by

Kohtaro Ohba and et al., December 2000

Board of Directors, WEST (Women in Engineering, Sciences, and Technology), Spring 1999-

2001.

Member, ETID six out of ten tenure-track mentoring committee, 1999-2000

Member, Engineering Technology Tenure and Promotion Peer Review Committee, 1994-1999.

Member, Departmental Faculty Search Committee, Spring 1998.

Member, Department Head Search Committee, Spring 1997.

Chairman, Semiconductor Manufacturing Curriculum Committee, Fall 1997.

Departmental Representative, College of Engineering Post Tenure Review Committee, July-

August, 1997.

Faculty Advisor, Tau Alpha Pi, National Engineering Technology Honor Society, 1990-1998.

Chairman, Faculty Search Committee, Electronics Engineering Technology, 1995 – 1996.

Member, Engineering Technology Master Degree Planning Committee, 1994-1995.

Faculty Advisor, IEEE region 5 Design Concert, Springfield, Colorado, May 1994.

Departmental United Way Representative. TAMU, College Station, TX, Fall 1991.

Member, Faculty Search Committee, Electronics Engineering Technology, 1990 – 1991.

Volunteer work during the “Give Five” Telethon to work with the Brazos Valley Arthritis Society,

Spring 1991 and the Brazos Valley Cerebral Palsy Association, Spring 1990.

Participated in event to benefit the Muscular Dystrophy Association (MDA), College Station, TX,

Spring 1990.

Chairman, student paper contest, 7th Annual Symposium on Information Transfer. TAMU, College

Station, TX, January 1990.

Chairman, Departmental Search Committee for a computer system manager, 1988-1989.

Judge, Science Engineering fair in the division of Engineering, Houston, Texas, March 1989.

Faculty advisor, IEEE region 5 Design Contest in which EET students won the first prize, Dallas,

Texas, May 1989.

TAMU liaison with Texas State Technical Institute, Fall 1990 – present.

TAMU liaison with MicroSim Corporation (CAD/CAE). MicroSim Corporation is the exclusive

owner of the mark “PSPICE” used in connection with computer programs. MicroSim is based in

Irvine, CA, August 1988 – 1996.