DPMS Barrels 050-066

17
50 ACCESSORIES-BARRELS 5.56/.223 CAL. BARRELS • .223 Cal., 1x8” Twist • Less Front Sight & Handguard Cap • .223 Cal., 1x8” Twist • Includes Adjustable Front Sight Post 20” SST DCM BARREL, PRE BAN 20” SST DCM BARREL, POST BAN 20” SST BARREL W/BARREL EXTENSION • .223 Cal., 1x8” Twist • Includes Adjustable Front Sight Post • 416 Stainless Steel • 1x8” or 1x9” Twist • Matte Stainless Finish • Target Crowned Muzzle • No Bayonet Lug All Post Ban .223 CAL. SST BULL BARRELS 16” BULL BARREL W/SINGLE RAIL GAS BLOCK 20” BULL BARREL W/SINGLE RAIL GAS BLOCK 20” BULL BARREL W/FRONT SIGHT 24” BULL BARREL W/SINGLE RAIL GAS BLOCK Now with a Koelbl Single Rail Gas Block! Now with a Koelbl Single Rail Gas Block! Now with a Koelbl Single Rail Gas Block! .223 CAL. SST BARRELS 20” SST SDM-R BARREL , FLUTED 18” SST MINI SASS BARREL 5.56 CAL. SST BARRELS • Cal.: 5.56 NATO, 1x8” Twist • Fluted/Stripped - Pre Ban • 416 Stainless Steel Heavy Barrel • Cal.: 5.56 NATO, 1x8” Twist • Stripped - Pre Ban • Fluted & Black Teflon Coated • 416 Stainless SteelBull Barrel 20” 1x9” TWIST, POST BAN • Target Crowned Muzzle • No Bayonet Lug • 5.56 x 45mm 5.56x45mm HEAVY BARRELS 16” 1X9” TWIST • Carbine barrel sight radius • Uses carbine handguards • 5.56 x 45mm, 1x9” Twist 16” 1x9” TWIST • 20” barrel sight radius • Uses standard A2 handguards • 5.56 x 45mm, 1x9” Twist 20” 1X9” TWIST 5.56 x 45mm, 1x9” Twist 18” SST MARK 12 BARREL • Cal.: 5.56 NATO, 1x8” Twist • Stripped - Pre Ban • Black Teflon Coated • 416 Stainless Steel Heavy Barrel BL-DC Retail . . . .$179.00 BL-DCMP Retail . . . .$199.00 BL-DCM Retail . . . .$199.00 BULL-03 Retail . . . .$259.00 BULL-03-16 Retail . . . .$239.00 BULL-03-24 Retail . . . .$289.00 BULL-10 Retail . . . .$269.00 BL-SASS Retail . . . .$239.95 BL-DC-F Retail . . . .$199.00 BL-10P Retail . . . .$179.00 BL-11 Retail . . . .$170.00 BL-10-A Retail . . . .$180.00 BL-M12 Retail . . . .$179.00 BL-10 Retail . . . .$179.00

Transcript of DPMS Barrels 050-066

Page 1: DPMS Barrels 050-066

50

AC

CE

SS

OR

IES

-BA

RR

ELS

5.56/.223 CAL.BARRELS

• .223 Cal., 1x8” Twist

• Less Front Sight & Handguard Cap

• .223 Cal., 1x8” Twist• Includes Adjustable Front Sight Post

20” SST DCM BARREL, PRE BAN

20” SST DCM BARREL, POST BAN

20” SST BARREL W/BARREL EXTENSION

• .223 Cal., 1x8” Twist• Includes Adjustable Front Sight Post

• 416 Stainless Steel • 1x8” or 1x9” Twist • Matte Stainless Finish• Target Crowned Muzzle • No Bayonet Lug • All Post Ban

.223 CAL. SST BULL BARRELS

16” BULL BARREL W/SINGLE RAIL GAS BLOCK

20” BULL BARREL W/SINGLE RAIL GAS BLOCK

20” BULL BARREL W/FRONT SIGHT

24” BULL BARREL W/SINGLE RAIL GAS BLOCK

Now with a Koelbl SingleRail Gas Block!

Now with a Koelbl SingleRail Gas Block!

Now with a Koelbl SingleRail Gas Block!

.223 CAL. SST BARRELS

20” SST SDM-R BARREL , FLUTED

18” SST MINI SASS BARREL

5.56 CAL. SST BARRELS

• Cal.: 5.56 NATO, 1x8” Twist• Fluted/Stripped - Pre Ban

• 416 Stainless Steel Heavy Barrel

• Cal.: 5.56 NATO, 1x8” Twist• Stripped - Pre Ban

• Fluted & Black Teflon Coated

• 416 Stainless SteelBull Barrel

20” 1x9” TWIST, POST BAN• Target Crowned Muzzle

• No Bayonet Lug

• 5.56 x 45mm

5.56x45mm HEAVY BARRELS

16” 1X9” TWIST• Carbine barrel sight radius• Uses carbine handguards • 5.56 x 45mm, 1x9” Twist

16” 1x9” TWIST• 20” barrel sight radius• Uses standard A2 handguards • 5.56 x 45mm, 1x9” Twist

20” 1X9” TWIST• 5.56 x 45mm, 1x9” Twist

18” SST MARK 12 BARREL• Cal.: 5.56 NATO, 1x8” Twist• Stripped - Pre Ban

• Black Teflon Coated

• 416 Stainless Steel Heavy Barrel

BL-DC Retail . . . .$179.00

BL-DCMP Retail . . . .$199.00

BL-DCM Retail . . . .$199.00

BULL-03 Retail . . . .$259.00

BULL-03-16 Retail . . . .$239.00

BULL-03-24 Retail . . . .$289.00

BULL-10 Retail . . . .$269.00

BL-SASS Retail . . . .$239.95

BL-DC-F Retail . . . .$199.00

BL-10P Retail . . . .$179.00

BL-11 Retail . . . .$170.00

BL-10-A Retail . . . .$180.00

BL-M12 Retail . . . .$179.00

BL-10 Retail . . . .$179.00

Page 2: DPMS Barrels 050-066

51

AC

CE

SS

OR

IES

-BA

RR

ELS

5.56/.223 CAL.BARRELS

16” SHORTY CARBINE, 1x9” TWIST

• 5.56 x 45mm

• 1x9” Twist

• Chrome Lined

5.56 x 45mm HEAVY BARRELS

16” AP4 BARREL W/MICULEK COMP

• Post ban

• With permanently attached Miculek Compensator

• 5.56 x 45mm

16” LIGHTWEIGHT CONTOUR, PRE BAN

• Pre ban

• Muzzle diameter is .640”

• 5.56 x 45mm

16” 1x9” TWIST, POST BAN

• Post ban

• Target Crowned muzzle

• No bayonet lug

• 5.56 x 45mm

16” LIGHTWEIGHT CONTOUR, POST BAN

• Post ban

• Muzzle diameter is .640”

• 5.56 x 45mm

16” TACTICAL BARREL, POST BAN• 5.56 x 45mm, 1x9” Twist

7” KITTY KAT BARREL*

• *7” barrels require a Class 3 license • 1x9” Twist• Chrome lined

11.5” HEAVY MACHINE GUN BARREL*

• *11.5” barrels require a Class 3 license

• 1x9” Twist

• Chrome lined

14.5” AP4 CONTOURED BARREL*• *14.5” barrels require a Class 3 license

• Chrome lined

• 1x9” Twist

5.56mm SHORT BARRELS

14.5” HEAVY BARREL w/PANTHER FLASH HIDER*• *14.5” barrels require a Class 3 license

• 1x9” Twist

• Chrome lined

14.5” HEAVY BARREL *• *14.5” barrels require a Class 3 license

• 1x9” Twist

• Chrome lined

Barrel InformationTo achieve the best results for accuracy you should clean the chamber and bore after every round forthe first 25 rounds, then every 10 rounds up to 100 rounds. It usually takes about 200 rounds per barrel for optimum accuracy. Please keep in mind that our barrels are production barrels, not custombarrels. Accuracy is dependent upon many factors such as bullet weight, powder load, rifling twist, riflinglands, operator technique, etc. Our production barrels have achieved anywhere from 1/8" to 1 1/2"M.O.A.. Obviously, we would hope that every production barrel would shoot 1/2" M.O.A., but with all ofthe above factors, we cannot guarantee a specific group size. NOTE: Using reloaded ammunition willvoid warranty. Modifying chamber or barrel voids warranty. This includes re-reaming of chamber, re-turning barrel to a lesser diameter and/or re-threading barrel for compensator orattachments.

DPMS BARREL SPECIFICATIONS

• CRYO Barrel Deep Freeze Available

(see pg. 30)

• 6 groove, Right-Hand twist

• Button Rifled

• Manganese phosphated

• Bayonet lug on Pre Ban barrels

• Threaded muzzle on Pre Ban barrels

• A.I.S.I. 4140 Chrome-moly steel

• Most SST barrels are a sandblasted matte

finish & natural gray finish

All bull barrels are targetcrowned as shown.

EXCEPT WHERE SPECIFIED OTHERWISE:

16” 1X9” TWIST, AP4 CONTOUR

• AP4 Style

• 5.56 x 45mm, 1x9” Twist

BL-10-AP Retail . . . .$180.00

BL-L16 Retail . . . .$169.00

BL-L16P Retail . . .$169.00

BL-11P Retail . .$170.00

BL-AP4PMC Retail . .$229.95

BL-12 Retail . . . .$185.00

BL-14H Retail . . . .$185.00

BL-14H-PF Retail . . . .$212.00

BL-12A Retail . . . .$185.00

BL-12B Retail . . . .$185.00

BL-AP4 Retail . . . .$204.00

BL-11-AP4 Retail . . . .$189.00

Page 3: DPMS Barrels 050-066

52

AC

CE

SS

OR

IES

-RE

CE

IVE

RS

.308 UPPER RECEIVERS AND PARTS

B O L T S A N DU P P E R R E C E I V E R S

.308 A3-STYLE UPPER RECEIVER, STRIPPED

.308 A3-STYLE UPPER RECEIVER, ASSEMBLED

SOLID STEEL FLATTOPUPPER RECEIVER, .308

.30 CAL REPAIR KIT

Includes one (1) each of the following parts:308-BT-14 Firing Pin, AR308-BT-07 Extractor308-BT-16 Firing Pin Retaining Pin308-BT-03 Extractor Pin308-BT-05 Ejector Spring308-BT-08 Extractor Spring

Assembly308-BT-06 Ejector308-BT-04 Ejector Roll Pin308-BT-17 Cam Pin

And three (3) of the following parts:308-BT-01 Bolt Gas

Rings

• Machined from 4140 steel for increased hardness and wear resistance.

• Balanced, smoother, sleeker and more rigid alternative to the standard .308 upper receiver.

• Adds stability and increases accuracy by bringing the rifle’s center of balance closer tothe shooter’s body.

• Cannot Be Used On The LR-30S Rifle!• Extra thick walled, extruded from 6066-T6

aluminum• Low style flattop allows use of detachable

carry handle.

• 308-FTT-EA1 includes the charging handle, ejection cover assembly & forward assist.

• Cannot Be Used On The LR-30S Rifle!

308-FTT-EA1 SHOWN

Carry handle designed to attach to 308 AR Flattop upper receivers allows use of iron sights.Easily installed and removed. Machined from 6061-T6 aluminum bar stock.

.308 DETACHABLECARRYING HANDLE

The pointed end of this chamber flag can be usedas a Delrin Punch. The recessed area in the frontof the flag holds an A2 Sight Tool (sold separately). A hole punched in the bottom of theflag allows you to secure an A2 Sight Tool withcable or string (not included). A rounded tab at thetop can be used as a scope adjustment tool (noneed to carry coins).

This chamber flag is included with all DPMS LR-308 rifle purchases.

DPMS .308 CHAMBER FLAG

• Bolt Assembly, assembled• 7.62 x 39mm

7.62 BOLT ASSEMBLY,ASSEMBLED

7.62 x 39 EXTRACTOR

• Extractor Only• 7.62 x 39mm

7.62 x 39 BOLT, STRIPPED

• Bolt Stripped

• Bolt Assembly, assembled• 6.8mm SPC

6.8mm BOLT, ASSEMBLED

6.8mm EXTRACTOR

• Extractor Only• 6.8mm SPC

Conversion or replacement parts for the 6.8mm SPC caliber. Will not work with .223.

6.8mm BOLT, STRIPPED

• Stripped Bolt• 6.8mm SPC

• Assembled, includes bolt• 6.8mm SPC

BOLT CARRIER ASSEMBLY

Bolts have been modified for ejection out of the left side of the receiver versus the right side.

LEFTY BOLT ASSEMBLY, COMPLETE

LEFTY BOLT ASSEMBLY, STRIPPED

For Use w/extractor spring insert fromthe original 5.56/.223 factory spring.

WOLFF EXTRA POWER EXTRACTOR SPRINGS

SOUTHPAW BOLT ASSEMBLIES

7.62x39mm BOLT ASSEMBLIES & PARTS6.8mm BOLTS AND PARTS

.308 LIGHTWEIGHTA3 UPPER RECEIVER

Lightweight version of the DPMS A3 Upper Receiver.

Cannot Be Used On The LR-30S Rifle!

Includes both extractor springs for the .308.

.308 EXTRACTORSPRING KIT

308-FTT-LPS Retail . . . .$300.00

308-BP-01 Retail . . . . .$79.95

308-FTT-EA1 Retail . . . .$209.95308-FTT-EA Retail . . . .$169.95

308-DCH Retail . .$139.95CF-001 Retail . . . .$3.50

BT-762B Retail . . . . .$49.95

BT-762E Retail . . . . .$18.95

BT-762 Retail . . . . .$77.95

BCBA-68AS Retail . . . .$165.90

BT-68S Retail . . . . .$52.95

BT-68E Retail . . . . .$23.95

BT-68 Retail . . . . .$79.95

BT-02S Retail . . . . .$60.00BT-02SA Retail . . . . .$82.95

WF-SP-510 Retail . . . . .$22.99

10 Pk.

WF-SP-53 Retail . . . . .$10.99

3 Pk.

WF-SP-5 Retail . . . . . .$4.49

1 Spring

308-FTT-LW Retail . .$199.95

308-BT-08K Retail . . . .$2.49

Page 4: DPMS Barrels 050-066

UPPER RECEIVERS & ASSEMBLIES

U P P E RR E C E I V E R S

“A3” FLATTOP,STRIPPED

• Low style flattop allows use of detachable carry handle.• Used by the military• Stripped A3 does not include the charging handle, ejection cover or forward assist assy.• FTT-EA1 includes the charging handle, ejection port cover assembly & forward assist.

• Dust cover omitted for lightweight, smooth, snag-free function

• Rail height approximately 1 7/8” above bore center line

• State-of-the-art aluminum material• Picatinny Rail• No forward assist or ejection port cover• FTT-HRA includes the charging handle

HI-RIDER FLATTOP

A solid integral two-piece extension of the upper receiver that allows operators to install a wider variety of optical accessories with greater security and stability. The extended rail can support multiple simultaneous attachments such as the red dot reflex sight and your night vision system or forward mounted reflex sight.

DPMS EXTENDED RAIL

Carry handle designed to attach to AR Flattopupper receivers allows use of iron sights. Easily installed and removed. Made from 7075forged aluminum.

DETACHABLE CARRYING HANDLE

Both Include:(1) Forward Assist Assembly (1) Ejection Cover Assembly (1) A2 Rear Sight Assembly

A2 UPPER RECEIVERPARTS KIT

• A1 style fixed carry handle• Forged from 7075 aluminum that has been T6

heat treated, hard coat anodized (Mil-A-8625A) and Teflon coated black

• UR-A1 is ASSEMBLED with the charging handle, shell deflector, dust cover, teardrop forward assist and A1 sight assembly (windage only). UR-01-E3 SHOWN!

A1 UPPERA2 UPPER

Raise the optical axis of your AR without lossof rigidity, plus add the ability to mount additional accessories on the two lower Weaver rails with standard one inch rings.

• FTT-02 is assembled with charging handle, forward assist & ejection port cover assembly.

TRI-MOUNT™ FLATTOP

• Dust cover omitted for lightweight, smooth, snag-free function

• Rail height slightly higher than A3 upper• State-of-the-art aluminum material• Picatinny Rail• No forward assist or ejection cover

FLATTOP LO-PRO

• A2 sight assembly, windage and elevation adjustable

• Shell deflector, dust cover and forward assist• UR-01-A3B is assembled with charging

handle, forward assist & ejection port cover assembly. UR-01-A3B is shown.

FTT-EA1 shown.Stripped A3 also available (FTT-EA)

FTT-02 shown.Stripped Tri-Mount also available (FTT-01)

UR-01-A3B shown.Stripped A2 upper also available (UR-36)

DPMS unveils the Lo-Pro-style 3-Rail upper receiver, an AR receiver that provides three additionalmounting options. Machined from a 6066-T6 extrusion, this upper receiver is hardcoat anodized per MilSpec and Teflon® coated a matte black. The upper receiver features a standard Picatinny top rail with15 slots, but making this AR receiver unique is the additional rails featured on the left and right sides.These two sides rails, located 22.5 degrees from horizontal, provide additional slots for mounting a variety of accessories. The left-hand rail features 15 slots while the right-hand rail provides an additional six. 3-Gunners and tactical shooters alike will appreciate the ability to mount back-up ironsights should their optic ever fail. The Lo-Pro-style 3-Rail Upper Receiver from DPMS will make theage-old problem of not having enough rails for accessories obsolete. Great for 3-Gun Competition!

TRIPLE RAIL UPPER RECEIVER

3-RAIL UPPER RECEIVER

53

URPK-1 Shown

“A3” FLATTOP,ASSEMBLED

AC

CE

SS

OR

IES

-RE

CE

IVE

RS

FTT-01 Retail . . . . . .$159.00

Does Not Work w/LR-11T

UR-01-E3 Shown

UR-A1 Retail . . . . . .$199.99

FT-DCH Retail . . . . . .$89.95

LESS CHARGING HANDLE

FTT-HRA Retail . . . .$139.95

FTT-LP Retail . . . .$125.00

FTT-EA Retail . . . .$125.00 FTT-EA1 Retail . . . .$165.00

FTT-HR Retail . . . .$125.00

UR-36 Retail . . . . .$99.95

UR-01-A3B Retail . . . .$219.00

FTT-01 Retail . . . .$159.00

FTT-02 Retail . . . .$197.95

URPK-LCH Retail . . . . .$50.00

UR-ER Retail . . . .$189.95

UR-01-E3 Retail . . . .$134.95

FTT-3R Retail . . . .$159.95

URPK-1 Retail . . . . .$68.00

WITH CHARGING HANDLE

STRIPPED COMPLETE ASSEMBLY

Page 5: DPMS Barrels 050-066

54

AC

CE

SS

OR

IES

-RE

CE

IVE

RS

UPPER RECEIVERS FROM VLTOR

U P P E RR E C E I V E R S

The MUR is a rigid MilSpec flat-top upper receiver made to fit all AR15/M16/M4 rifles andcarbines. The MUR was developed to give thecustomer a MilSpec correct upper receiver witha thicker wall making the MUR upper receiver a more rigid platform. With shell deflector only.

MUR A3 WITH SHELLDEFLECTOR ONLY

The CARBINE LENGTH Versatile InterfaceStructure (VIS) upper receiver assembly. TheVIS is a polylithic upper receiver assemblythat ties the normally individual receiver andhandguard into an aggregate single part.Includes shell deflector only.

VIS W/SHELLDEFLECTOR ONLY (CAR)

The MID LENGTH Versatile Interface Structure(VIS) upper receiver assembly. The VIS is apolylithic upper receiver assembly that ties thenormally individual receiver and handguard intoan aggregate single part. Includes bolt assistand shell deflector.

VIS W/BOLT ASSIST &SHELL DEFLECTOR (MID)

The STANDARD LENGTH Versatile InterfaceStructure (VIS) upper receiver assembly. TheVIS is a polylithic upper receiver assembly thatties the normally individual receiver and hand-guard into an aggregate single part. Includesbolt assist and shell deflector.

VIS W/BOLT ASSIST &SHELL DEFLECTOR (STD)

The STANDARD LENGTH Versatile InterfaceStructure (VIS) upper receiver assembly. The VISis a polylithic upper receiver assembly that tiesthe normally individual receiver and handguardinto an aggregate single part. Includes shell deflector only.

VIS W/SHELLDEFLECTOR ONLY (STD)

VIS W/SHELLDEFLECTOR ONLY (MID)

The CARBINE LENGTH Versatile InterfaceStructure (VIS) upper receiver assembly. TheVIS is a polylithic upper receiver assemblythat ties the normally individual receiver andhandguard into an aggregate single part.Includes bolt assist and shell deflector.

VIS W/BOLT ASSIST &SHELL DEFLECTOR (CAR)

The MUR is a rigid MilSpec flat-top upper receiver made to fit all AR15/M16/M4 riflesand carbines. The MUR was developed togive the customer a MilSpec correct upper receiver with a thicker wall making the MURupper receiver a more rigid platform. Withbolt assist and shell deflector.

MUR A3 W/BOLT ASSIST& SHELL DEFLECTOR

The MID LENGTH Versatile Interface Structure(VIS) upper receiver assembly. The VIS is apolylithic upper receiver assembly that ties thenormally individual receiver and handguard intoan aggregate single part. Includes shell deflector only.

SOUTHPAW UPPER RECEIVERS

• Dust cover omitted for lightweight, smooth, snag-free function

• Rail height slightly higher than A3 upper• State-of-the-art aluminum material• Picatinny Rail

FLATTOP LO-PRO UPPER RECEIVER

These left handed upper assemblies do not include the charging handle or forward assist.

• Machined from a 7075-T6 aircraft allloy forging• Anodized black and Teflon coated• Bolt modified 180° for left side ejection• Right side port cover boss is unmachined• All dimensions are held to exacting Military

requirements

SOUTHPAW A2 UPPER RECEIVER

• Raise the axis of your AR without the loss ofrigidity, plus allows you to mount additional accessories on the two lower Weaver rails

• Features include: Left-hand ejection and thestandard right side forward assist. Right side port cover boss remains un-milled.

TRI-MOUNT UPPER RECEIVER

These left handed upper assemblies do not include the charging handle or forward assist.

• Same great construction as our standard Hi-Rider, now available in left-hand ejection

• Rail height approximately 1 7/8” above bore center line

• Does not feature forward assist, dust cover or ejection port cover for snag-free operation.

SOUTHPAW HI-RIDERUPPER RECEIVER

FF-VIS-2AK Retail . . . . .$674.95

UR-MUR-1A Retail . . . .$229.95 UR-MUR-1S Retail . . . .$199.95

FF-VIS-2SK Retail . . . .$649.95

FF-VIS-1AK Retail . . . .$629.95

FF-VIS-3AK Retail . . . .$729.95

FF-VIS-1SK Retail . . . .$595.95

FF-VIS-3SK Retail . . . .$695.95

FTT-01SPLPB Retail . . .$199.95 URSP-01A2 Retail . . .$199.95

With Stripped Bolt

FTT-01SPB Retail . . .$249.00

With Stripped Bolt

FTT-SPB Retail . . .$249.00

With Stripped BoltWith Stripped Bolt

Page 6: DPMS Barrels 050-066

55

AC

CE

SS

OR

IES

-GA

S S

YS

TE

M

M69 Gas Buster A-15/E-16/AP4 Charging Handle by PRI. Features the Big Flat Latch.Increases safety by inhibiting harmful blowbackgas and oil particles from striking shooter's face and glasses."

GASBUSTER CHARGING HANDLE, BIG FLAT LATCH

CHARGING HANDLESLATCHES, GAS TUBES

BADGER CHARGING HANDLE, GEN II TAC LATCH

For use with the A-15/EM-16 and SR-25 series rifles. Replaces the charging handle, and allows easy function of rifle with either hand. A must for the tactical or scoped Flattop rifles. Charging handle assembly.

TAC LATCH CHARGE HANDLE ASSEMBLY

A2 Charging handle made out of steel. Will work in any A-15/EM-16 upper receiver.

• “Won’t Bend!”• “Great for Competition!”

“MICULEK” STEELCHARGE HANDLE

SOG TAC LATCH w/CHARGING HANDLE

Manufactured by SOG Armory. Features a stainless steel Tac Latch and a standard aluminum charging handle. Sold only as a complete assembly.

TACTICAL LATCH

For use with the A-15/EM-16 and SR-25 series rifles. Replaces the charging handle latch, allowseasy function of rifle with either hand. A must forthe tactical or scoped Flattop rifles. Charging handle not included. Latch only.

M69 Gas Buster A-15/E-16/AP4 Charging Handle by PRI. Features the Big Latch.Increases safety by inhibiting harmful blowbackgas and oil particles from striking shooter's faceand glasses."

GASBUSTER MILITARY BIGLATCH CHARGING HANDLE

Oversized latch handle that is quick & easy to cycle. Latch Only.

PRI BIG LATCH

Oversized latch handle that is quick & easy to cycle. FLAT. Latch Only.

PRI BIG FLAT LATCH

A smaller profile Tactical latch for the AR seriesof rifles, allows the easy operation of the charging handle with either hand.

EJECTION COVER PIN

EJECTION PORT COVER

REAR A2 BASE LUG

FORWARD ASSISTS

CHROMIUM PLATED

UR-C4 = ROUND

UR-C4A = TEARDROP

UR-18-G2 Retail . . . . . .$19.95UR-M84MBL Retail . . . .$89.95UR-M84BLF Retail . . . . .$86.75

CH-ST Retail . . . . . .$59.95

UR-18BLF Retail . . . . . .$17.99 UR-18BL Retail . . . . . .$19.95 CH-5130 Retail . . . . . .$43.95

CH-G2 Retail . . . . . .$43.95

CL-T Retail . . . . . .$19.95CH-TL Retail . . . . . .$43.95

LATCH ONLY

CHARGING HANDLE ASSEMBLY

UR-C3 Retail . . . . . . .$5.00

UR-C2 Retail . . . . . .$10.00

UR-C29 Retail . . . . . .$20.95

UR-C4 Retail . . . . . .$20.00

UR-C4A Retail . . . . . .$20.00

Page 7: DPMS Barrels 050-066

56

AC

CE

SS

OR

IES

-GA

S S

YS

TE

M

GAS BLOCKS &GAS SYSTEMS

The Vltor Low-Profile Gas Block covers one-inch of the barrel’s surface and is made to the tightest tolerance. This gas block is offered in 4140 carbon steel. Screw Mount Style.

VLTOR SET SCREWGAS BLOCK

This gas block replaces your existing front sight and allows the user to mount accessories to its two Picatinny rails. It is mounted by the use of four socket head cap screws for easy installation.This gas block allow the mounting of our forearms without the removal of your muzzle accessory.

YANKEE HILL TWO-PIECE GAS BLOCK

This gas block replaces your existing front sight and allows the user to mount accessories to its top Picatinny rail while retaining the bayonet lugand sling mount. It is mounted by the use of four socket head cap screws for easy installation.This gas block allow the mounting of our forearms without the removal of your muzzle accessory.

YANKEE HILL RAILED GASBLOCK w/BAYONET LUG

The Vltor Low-Profile Gas Block covers one-inch of the barrel’s surface and is made to the tightest tolerance. This gas block is offered in 17-4PH stainless steel. Clamp Mount Style.

VLTOR STEEL CLAMPGAS BLOCK, STAINLESS

New production Micro Gas Block by CMMG. Ultra compact design fits standard .936, .750, and.625 diameter barrels. Secures with two set screws. 4150 steel.

CMMG MICRO GAS BLOCK

GS-KT Includes

1 Gas Tube Roll Pin (BL-03)1 Std Length Gas Tube (BL-04)3 Bolt Gas Rings (BT-01)2 Bolt Carrier Key Screws (BT-10)1 Bolt Carrier Key (BT-11)

AR15 GAS SYSTEM KITS

The Vltor Low-Profile Gas Block covers one-inch of the barrel’s surface and is made to the tightest tolerance. This gas block is offered in 4140 carbon steel. Clamp Mount Style.

VLTOR STEEL CLAMPGAS BLOCK

The VST folding front sight and gas block is an all-steel, flip-up design, with a spring loaded dual-plunger detent. There is no lock. If hit, the sight will fold down, rather than damage a locking mechanism. It incorporates a QD sling swivel cup mount, and uses an AK front sight post.

VLTOR SIGHT TOWERGAS BLOCK

Replaces your existingfront sight to provide alow profile design that canbe used to mount a riflelength forearm to a carbine length barrel. It ismounted using two setscrews. Made from highquality steel and finishedwith a Mil Spec phosphate coating.

BADGER MK12 GAS BLOCK

The Vltor Low-Profile Gas Block covers one-inch of the barrel’s surface and is made to the tightest tolerance. This gas block is offered in 17-4PH stainless steel. Screw Mount Style.

VLTOR SET SCREWGAS BLOCK, STAINLESS

This gas block replaces your existing front sightto provide a simple, low profile design that canbe used to mount a rifle length forearm to a carbine length barrel. It is mounted by the use oftwo set screws. Manufactured from high qualitysteel and finished with a Mil Spec phosphatecoating.

YANKEE HILL LOW PROFILE GAS BLOCK

GS-KTC Includes

1 Gas Tube Roll Pin (BL-03)1 Car Length Gas Tube (BL-04A)3 Bolt Gas Rings (BT-01)2 Bolt Carrier Key Screws (BT-10)1 Bolt Carrier Key (BT-11)

Manufactured by DPMS! Low profile gas block designed to fit under the free float tube. Machined from 4130 steel.

SASS GAS BLOCK

Single rail gas block for .308 cal. rifles. Picatinnyrail on top of gas block. Correct height for the LR-308 rifles with the Lo-Pro style upper receiverto attach iron sights. Rifles with the .308 A3-styleupper receivers should use GB-SR7 (.750 dia. barrels) or GB-SR-9 (.936 dia. barrels).

KOELBL SINGLE RAIL.308 GAS BLOCKS

.750 Diameter .936 Diameter

GB-YHM-9836A Retail . .$72.95

GB-YHM-9390A Retail . .$66.95 GB-2S Retail . .$51.95

GB-2CS Retail . .$65.95GB-2C Retail . .$54.95

GB-VST-1C Retail .$225.00

GB-249.30 Retail . .$65.00

GB-2SS Retail . .$58.95

GB-YHM-9381A Retail . .$38.95

Retail . . . . . . . . . . . . . . . .$59.95

Retail . . . . . . . . . . . . . . . .$28.95

GS-KT - STANDARDGS-KTC - CARBINE

GB-M625 - .625” DiameterGB-M750 - .750” DiameterGB-M936 - .936” Diameter

GB-SASS-1 Retail . . . .$109.95

GB-SASS Retail . . . .$109.95 Retail . . . . . . . . . . . . . . . .$69.95

.750 Diameter

.936 Diameter

308-GB-SR7 = .750 diameter308-GB-SR9 = .936 diameter

Page 8: DPMS Barrels 050-066

57

AC

CE

SS

OR

IES

-GA

S S

YS

TE

MSSingle rail gas block .750 dia. Picatinny rail on

top of gas block.

.750 Dia. KOELBL SINGLERAIL GAS BLOCK

Aluminum gas block fits DPMS Bull barrels or any barrel with a diameter of .936” at the gas port. Hardcoat anodized black. Also Available for Super Bull barrels with1.10” diameter hole. BULL-02-SBAlso Available for standard barrels with .750” diameter hole. BULL-02-ST

BULL BARREL GAS BLOCK

Aluminum gas block with four Picatinny rails for mounting multiple accessories.Currentlymade for the DPMS Bull barrels. Bore diameter is.936 anodized black. Also available in .750.

• .750 dia. = GB-4RA • .936 dia. = GB-4R

4 RAIL GAS BLOCK

Single rail gas block .936 dia. Picatinny rail on top of gas block.

.936 Dia. KOELBL SINGLERAIL GAS BLOCK

JP ENTERPRISESADJUSTABLE GAS BLOCK

JP ENTERPRISESADJUSTABLE GAS BLOCK

GAS BLOCKS & .308 FREE FLOAT TUBES

• Aluminum Construction • Anodized Black

• Ribbed not Knurled • “Free Float Accuracy”All two piece Construction.

Manufactured by Clark Custom..LR-308 Carbon Fiber Handguard is light-weightand has a unique appearance.

308 CARBON FIBERHANDGUARD

.308 STANDARD FREE FLOAT TUBES

The 2.1” diameter .308 caliber carbon fiber free float handguards from DPMS stay cooler than the standard aluminum free float tubes and weigh less, providing you with a unique alternative to the traditional handguard. The carbon fiber utilized in these free float tubes works in two ways, internallythe unidirectional carbon fiber increases the strength and stability of the tube while externally the bi-directional carbon fiber provides a textured look and feel to the free float tube. Additionally, an internal layer of fiberglass prevents corrosion between the aluminum tube and the carbon fiber, ensuring a long lasting lightweight alternative tube. Includes the hard anodized barrel nut.Standard: Length = 12.6875”, Weight = 0.45 lbs. Carbine: Length = 7.3125”, Weight = 0.3 lbs.

308 CARBON FIBER FREE FLOAT TUBES

V-Tac Modular Hand Guard System for Carbinelength gas system on DPMS LR-308 16" or 18" barrels

• 1.75 ID, 2.00 OD, 7.0" OAL

• All matte black finish

V-TAC MODULAR HGSYSTEM, CARBINE

V-Tac Modular Hand Guard System for DPMS LR-308 or Knights SR-25 type rifles.

• 1.75 ID, 2.00 OD, 12.5" OAL

• Weight: 15 oz.

• All matte black finish

V-TAC MODULAR HGSYSTEM, STANDARD

GT Steel single rail gas block. Fits standard heavy barrels.

GT STEEL SINGLE RAILGAS BLOCK

Aluminum Gas Block, .750 dia

Steel Gas Block, .750 dia

GB-4RA Retail . . . . . .$49.95

BULL-02 Retail . . . . . .$29.95

GB-SR9 Retail . . . . . .$49.99

GB-SR7 Retail . . . . . .$49.99

GB-4R Retail . . . . . .$49.95

GS-JP Retail . . . . .$69.95

GS-JPGS-2S Retail . . . .$79.95

SST w/Quick Detach Point Large Bore Gas Block, .936 dia

Aluminum Bull Barrel Gas Block, .936 dia

GS-JP-B Retail . . . . . .$89.95

GS-JP-4S Retail . . . . .$89.95

Retail . . . . . . . . . . . . . . . .$59.95308-FF-CL Retail . . . .$125.00

308-FF-CFC Retail . . . .$133.50

308-FF-CF Retail . . . .$133.50

308-FF-02 = STANDARD LENGTH308-FF-01 = CARBINE LENGTH

308-FF-4D Retail . . .$149.95 308-FF-1D Retail . . .$149.95

GB-5031 Retail . . . . . .$49.95

Page 9: DPMS Barrels 050-066

58

AC

CE

SS

OR

IES

-HA

ND

GU

AR

DS

.308 AND ARFREE FLOAT TUBES

• Aluminum Construction • Anodized Black

• Ribbed not Knurled • “Free Float Accuracy”

All two piece Construction.

STANDARD LENGTH

BASIC FREE FLOAT TUBES

CARBINE LENGTH

• Aluminum Construction • Anodized Black

• Ribbed not Knurled • “Free Float Accuracy”

All two piece Construction.

STANDARD LENGTH

VENTED FREE FLOAT TUBES

CARBINE LENGTH

Free floating handguard with rods inserted into two aluminum end caps. The best balanced and ventilated free floated handguard available. Standard and carbine lengths available.

(Unassembled) (No Bipod Stud)

STANDARD LENGTH

HOT ROD HANDGUARDS

CARBINE LENGTH

CARBON FIBER FREE FLOAT TUBES

The 2” diameter carbon fiber free float handguards from DPMS stay cooler than the standard aluminum free float tubes and weigh less, 40% less, providing you with a unique alternative to the traditional handguard. The carbon fiber utilized in these free float tubes works in two ways, internallythe unidirectional carbon fiber increases the strength and stability of the tube while externally the bi-directional carbon fiber provides a textured look and feel to the free float tube. Additionally, an internal layer of fiberglass prevents corrosion between the aluminum tube and the carbon fiber, ensuring a long lasting lightweight alternative tube. Includes the hard anodized barrel nut.Standard: Length = 12.625”, Weight = 0.55 lbs. Carbine: Length = 7.25”, Weight = 0.35 lbs.

4-RAIL FREE FLOAT TUBES FOR LR-308’S

The .308 cal. version of the 4-rail free float tube features a solid one-piece free float tube made from6066-T6 aluminum. The Picatinny style rails are integrally machined into the free float tube. Two railheights are available, one for the A3-style upper receiver and the other for the original LR-308 upperreceiver. Each rail height is available in two lengths, standard and carbine. The free float tubes arevented and hard coat anodized per Mil Spec and matte black in color. Overall width dimension is 2.1”,only slightly wider than the AR free float tubes and include a manganese phosphated steel locking collar to control the timing of the rails.

This 4-rail free float tube for the LR-308 Rifle Series features a solid one-piece free float tube made from 6000 Series aluminum with a T6 heattreatment. The Picatinny style rails are integrally machined but now feature 4 removable rails at the front of the tube. 16 individual vents help increase the airflow to the barrel. The low profiledesign of the free float tube is compatible to the 308 A3-Style upper receiver.

.308 VENTED FREE FLOAT TUBES

.308 SASS 4-RAILFREE FLOAT TUBE

• Aluminum Construction • Anodized Black

• Ribbed not Knurled • “Free Float Accuracy”All two piece Construction.

Same as the AR-15 Stabilizer guard but with awider mounting block to accommodate theadded weight and recoil of a 308. Made with afull length M1913 integral down the full length ofthe top. Drilled and tapped to accept thePicatinny rail sections. Aluminum alloy, Mil spechard coat black anodizing.

BADGER ORDNANCE.308 STABILIZER HG

This 12" Lite Rail is machined from 6061-T6Aircraft Grade Hardened Aluminum. The rail'sunique "Bolt Up" mounting system mates withthe upper receiver to create a singular 'monolithic' rail along the entire top portion of therifle.

DANIEL DEFENSELITE RAIL

.308 CAL. FLOAT TUBES

FF-HCAR Retail . . . . . .$84.95FF-HGR Retail . . . . . .$89.95

FF-01VCAR Retail . . . . .$74.95FF-02VSTD Retail . . . . .$78.95

FF-01 Retail . . . . . .$49.95FF-02 Retail . . . . . .$53.95

FF-CFC Retail . . . . . .$89.00

STANDARD LENGTHFF-CF Retail . . . . .$99.00

CARBINE LENGTH

308-FF-SASS Retail . . .$229.95Retail . . . . . . . . . . . . . . . .$79.95

STANDARD LENGTH, A3 HEIGHT

CARBINE LENGTH, ORIGINAL LR-308 HEIGHT

STANDARD LENGTH, ORIGINAL LR-308 HEIGHT

CARBINE LENGTH, A3 HEIGHT

308-FF-4SL Retail . . . .$189.95

308-FF-4CH Retail . . . .$179.95

308-FF-4SH Retail . . . .$189.95

308-FF-4CL Retail . . . .$179.95

308-FF-02VSTD = STANDARD LENGTH308-FF-01VCAR = CARBINE LENGTH

308-FF-525-04 Retail . . .$189.00 308-FF-DDLR Retail . . .$425.00

Page 10: DPMS Barrels 050-066

59

AC

CE

SS

OR

IES

-HA

ND

GU

AR

DS

F R E E F L O A T T U B E S

Full-Length Free Float tube with 4-Rails formounting accessories. Top rail extends acrossa majority of the A3 Upper Receiver rail.Bipod/Sling Stud included and can be installedon either side of the tube or on the bottom.

P.O.F. P12 4-RAIL

Mid-Length Free Float tube with 4-Rails formounting accessories. Top rail extends fully tothe rear of the A3 Upper Receiver rail.Bipod/Sling Stud included and can be installedon either side of the tube or on the bottom.

P.O.F. P9X 4-RAIL

Full-Length Free Float tube with 4-Rails formounting accessories. Top rail extends fully tothe rear of the A3 Upper Receiver rail.Bipod/Sling Stud included and can be installedon either side of the tube or on the bottom.

P.O.F. P12X 4-RAIL

Carbine Length Free Float tube with 4-Rails formounting accessories. Top rail extends acrossa majority of the A3 Upper Receiver rail.Bipod/Sling Stud included and can be installedon either side of the tube or on the bottom.

P.O.F. P4 4-RAIL

Carbine Length Free Float tube with 4-Rails formounting accessories. Top rail extends fully tothe rear of the A3 Upper Receiver rail.Bipod/Sling Stud included and can be installedon either side of the tube or on the bottom.

P.O.F. P4X 4-RAIL

Mid-Length Free Float tube with 4-Rails formounting accessories. Top rail extends acrossa majority of the A3 Upper Receiver rail.Bipod/Sling Stud included and can be installedon either side of the tube or on the bottom.

P.O.F. P9 4-RAIL

4-RAIL FREE FLOAT TUBES

The improved version of the 4-rail free float tube features a solid one-piece free float tube made from6000 Series aluminum with a T6 heat treatment. The Picatinny style rails are integrally machined intothe free float tube. The Picatinny rails are designed for the attachment of foregrips, flashlights, opticsor any other type of rail mounted accessories. The free float tube is also vented with 16 individual ventsfor increased airflow to the barrel. The overall width dimension is 2 3/8” giving it the same feel as a AP4handguard.

6 RAIL FREE FLOAT TUBES

Looking for additional ways to add accessories to your AR rifle but finding yourself limited to 4-Railhandguards and free float tubes? DPMS has the answer to your needs. DPMS-Panther Arms goes astep further and offers the 6-Rail Free Float Tube, standard and carbine length, for your AR rifle. Thesenew 6-Rail handguards feature a 2-3/8” diameter 6000 series aluminum one-piece free float tube witha T6 heat treatment, hard-coat anodized black. Machined into the free float tube are six Picatinny railsfeaturing 30 slots per rail on the standard length tubes and 17 slots per rail on the carbine lengths. 48individual vents increase the airflow to the barrel and help cool the standard length tube while 24 ventsdisperse the heat on the carbine version. Each 6-Rail Free Float Tube includes a manganese phosphated steel locking collar that controls the timing on the rails. Now you can mount as many accessories as you want to your AR-style rifle to make it completely customized.

Hogue Soft Rubber Free Float Tube, Carbine Length. AR-15/M-16 free float aluminum forend with over-molded rubber gripping area.

HOGUE SOFT RUBBERFREE FLOAT TUBE, Carbine

Standard Length. AR-15/M-16 free float aluminum forend with over-molded rubber gripping area.

HOGUE SOFT RUBBERFREE FLOAT TUBE, Std.

FF-P4X Retail . . . . .$269.00

FF-P12X Retail . . . . .$295.95 FF-P9 Retail . . . . .$269.00FF-P12 Retail . . . . .$285.00 FF-P9X Retail . . . . .$279.00

FF-P4 Retail . . . . .$249.00

FF-4RK Retail . . . . .$129.95

KITTY KAT LENGTH

FF-4R Retail . . .$134.00

CARBINE LENGTH

STANDARD LENGTHFF-ST4 Retail . .$149.00

FF-6RC Retail . .$141.00

STANDARD LENGTHFF-6R Retail . .$159.00

CARBINE LENGTH

OD GREEN

FF-15204 Retail . . . . .$74.99

BLACK

FF-15012 Retail . . . . .$89.95FF-15004 Retail . . . . .$69.99

Page 11: DPMS Barrels 050-066

60

AC

CE

SS

OR

IES

-HA

ND

GU

AR

DS

FREE FLOAT TUBES& HANDGUARDS

Yankee HIll Machine Customizable Free Float Forearm System! These customizable tubes area great addition to any firearm just as they are.They feature slotted heat vents and two mounting points. Each tube is drilled and tappedat the 3, 6, 9 and 12 o’clock positions. All assemblies include: one jam nut, one barrel nut, and one forearm tube. Overall length: 12.5 in - Weight 14.6 oz.

FREE FLOAT FOREARMSYSTEM, FULL LENGTH

FREE FLOAT FOREARMSYSTEM, CARBINE LENGTH

YH FREE FLOAT 4-RAILFOREARM, 9.675”

*New and Improved* Now utilizing anti-rotation screws to insure that the forearm stays solid even under strenuous use. With the addition ofthe anti-rotation screws the forearms are now even better suited for forward grips and optics. Features include: mounting points and Mil. Spec. Picatinny rails. The barrel nut and forearm tube are made of aircraft quality aluminum and hardcoat anodized to Mil. Specs.The jam nut is made from quality steel and phosphate coated. All assemblies include: one jam nut, one barrel nut, and one forearm tube.

YH FREE FLOAT 4-RAILFOREARM, 12.5”

• 1.75 ID 2.00 OD, 7.0" OAL.

V-TAC MODULARHANDGUARD SYSTEM

• 1.75 ID, 2.00 OD, OAL:12.5" • Weight: 15 oz.

YH FREE FLOAT 4-RAILFOREARM, 7.2” (CARBINE)

YH FREE FLOAT 4-RAILFOREARM, 9.2”

Yankee HIll Machine Customizable Free Float Forearm System! These customizable tubes area great addition to any firearm just as they are. They feature slotted heat vents and two mounting points. Each tube is drilled and tappedat the 3, 6, 9 and 12 o’clock positions. All assemblies include: one jam nut, one barrel nut, and one forearm tube. Overall length: 9.675 in - Weight 12 oz.

FREE FLOAT FOREARMSYSTEM, MID LENGTH

Yankee HIll Machine Customizable Free Float Forearm System! These customizable tubes area great addition to any firearm just as they are.They feature slotted heat vents and two mounting points. Each tube is drilled and tappedat the 3, 6, 9 and 12 o’clock positions. All assemblies include: one jam nut, one barrel nut, and one forearm tube. Overall length: 7.2 in - Weight 9.5 oz.

YH FREE FLOAT 4-RAIL FOREARM, 4.15”

*New and Improved* Now utilizing anti-rotation screws to insure that the forearm stays solid even under strenuous use. With the addition ofthe anti-rotation screws the forearms are now even better suited for forward grips and optics. Features include: mounting points and Mil. Spec. Picatinny rails. The barrel nut and forearm tube are made of aircraft quality aluminum and hardcoat anodized to Mil. Specs.The jam nut is made from quality steel and phosphate coated. All assemblies include: one jam nut, one barrel nut, and one forearm tube.

*New and Improved* Now utilizing anti-rotation screws to insure that the forearm stays solid even under strenuous use. With the addition ofthe anti-rotation screws the forearms are now even better suited for forward grips and optics. Features include: mounting points and Mil. Spec. Picatinny rails. The barrel nut and forearm tube are made of aircraft quality aluminum and hardcoat anodized to Mil. Specs.The jam nut is made from quality steel and phosphate coated. All assemblies include: one jam nut, one barrel nut, and one forearm tube.

Overall Length: 12.5”, Weight: 14.75 oz. Overall Length: 9.675”, Weight: 12.9 oz. Overall Length: 9.2”, Weight: 12.4 oz.

*New and Improved* Now utilizing anti-rotation screws to insure that the forearm stays solid even under strenuous use. With the addition ofthe anti-rotation screws the forearms are now even better suited for forward grips and optics. Features include: mounting points and Mil. Spec. Picatinny rails. The barrel nut and forearm tube are made of aircraft quality aluminum and hardcoat anodized to Mil. Specs.The jam nut is made from quality steel and phosphate coated. All assemblies include: one jam nut, one barrel nut, and one forearm tube.

Overall Length: 7.2”, Weight: 10.6 oz.

*New and Improved* Now utilizing anti-rotation screws to insure that the forearm stays solid even under strenuous use. With the addition ofthe anti-rotation screws the forearms are now even better suited for forward grips and optics. Features include: mounting points and Mil. Spec. Picatinny rails. The barrel nut and forearm tube are made of aircraft quality aluminum and hardcoat anodized to Mil. Specs.The jam nut is made from quality steel and phosphate coated. All assemblies include: one jam nut, one barrel nut, and one forearm tube.

The JP modular handguard system has been re-designed to offer the best versatility of any handguard system while retaining the lightweight and cooling capacity of their originaldesign.

FF-JPHG-1M = FULL LENGTH

FF-JPHG-4M = CARBINE LENGTH

This free floating forearm features a smooth design for a more comfortable grip while incorporating a full length top rail. The forearm also features three 2.5" rails that extend beyond the front sight to allow the mounting of accessories.

YH CARBINE SMOOTHFOREARM

Hot Rod Handguard with adjustable sliding handstop.

HOT ROD HANDGUARDw/HANDGRIP

This CASV chassis is made entirely of aluminum with exception to the stainless steel mounting hardware. After mounted, the CASV adds less than 1lb to the firearm's overall weight.

VLTOR EXT. LENGTHHANDGUARD

Retail . . . . . . . . . . . . . . .$149.95

FF-YHM-9809A Retail . .$105.00

FF-YHM-9631 Retail . .$120.00FF-9634 Retail . . . .$128.50FF-9638 Retail . . . . .$128.50FF-YHM-9636 Retail . .$159.95

FF-YHM-9431A Retail . .$86.95FF-YHM-9430A Retail . .$94.95FF-YHM-9432A Retail .$158.95

FF-YHM-5000 Retail . . .$136.00FF-HGS Retail . . . . .$119.95Retail . . . . . . . . . . . . . . .$235.95

FF-CASV-EL BLACKFF-CASV-ELT TANFF-CASV-ELG GREEN

Page 12: DPMS Barrels 050-066

61

AC

CE

SS

OR

IES

-HA

ND

GU

AR

DS

FREE FLOATHANDGUARDS

Manufactured by Midwest Industries• No removal of barrel or front sight for

installation. Simply cut off the delta ring for a easy install.

• MIL-STD 1913 rails.• T-marked for accessory location.• Constructed of 6061 hard coat anodized for a

lifetime of service.• Uninterrupted or monolithic look upper rail.• High quality at an affordable price.

2 PC. FOREARM, EXT.CARBINE LENGTH

2 PC. FOREARM, CARBINE LENGTH

4-RAIL HANDGUARDfrom MIDWEST IND.

Manufactured by Midwest Industries. 4.25” length, 4-rail two piece handguard.

4-RAIL HANDGUARDfrom MIDWEST IND.

From Badger Ordnance.Ergonomic Beavertail profile and wide flat bottommakes it great for Tactical or sport shooting. Thehandguard is specifically designed to provide a stable platform for shooting unlike a round handguard.

BADGER STABILIZERHANDGUARD

YANKEE HILL CARBINELENGTH HANDGUARD

Made by Yankee Hill Machine. These handguards are designed to replace your standard plastic handguards with a 4-rail Picatinny design. Simply remove your existing handguard panels and insert these in their place.

2 PC. FREE FLOAT FOREARM, MID LENGTH

2 PC. FREE FLOATFOREARM, CARBINE

Manufactured by Midwest Industries• No removal of barrel or front sight for

installation. Simply cut off the delta ring for a easy install.

• MIL-STD 1913 rails.• T-marked for accessory location.• Constructed of 6061 hard coat anodized for a

lifetime of service.• Uninterrupted or monolithic look upper rail.• High quality at an affordable price.

2 PC. FOREARM, MID LENGTH

Made by Yankee Hill Machine. These handguards are designed to replace your standard plastic handguards with a 4-rail Picatinny design. Simply remove your existing handguard panels and insert these in their place.

YANKEE HILL MIDLENGTH HANDGUARD

Made by Yankee Hill Machine. These handguards are designed to replace your standard plastic handguards with a 4-rail Picatinny design. Simply remove your existing handguard panels and insert these in their place.

YANKEE HILL FULLLENGTH HANDGUARD

Two-Piece, Carbine Length. Manufactured byMidwest Industries.• MIL-STD 1913 Rails, T-marked for accessory

location.• Constructed of 6061 aluminum, hard coat

anodized for a lifetime of service.• Simple to install, installation similar to

factory/plastic units. • Solid Lock-up

GT 2 PC. CARBINE QUADRAIL HANDGUARDManufactured by Midwest Industries. Carbine

length Free Float Tube Handguard, 4-rail twopiece.

Manufactured by Midwest Industries• No removal of barrel or front sight for

installation. Simply cut off the delta ring for a easy install.

• MIL-STD 1913 rails.• T-marked for accessory location.• Constructed of 6061 hard coat anodized for a

lifetime of service.• Uninterrupted or monolithic look upper rail.• High quality at an affordable price.

Weight: 14.0 oz.Manufactured by Midwest Industries

• MIL-STD 1913 rails.• T-marked for accessory location.• Constructed of 6061 hard coat anodized for a

lifetime of service.• Uninterrupted or monolithic look upper rail.• High quality at an affordable price.

Weight: 13.5 oz.

Manufactured by GT. 2 pc. Carbine Quad RailHandguard.

3Pack Rail Section for Badger Stabilizer Handguard (FF-249-04) Above.

BADGER RAIL 3PK

HG-YHM-9803 Retail . . .$197.00 HG-YHM-9805 Retail . . .$168.50 HG-YHM-9670 Retail . . .$147.50

FF-249-04 Retail . . .$152.00

FF-9761 Retail . . . . .$139.95

HG-MCTAR17 Retail . . .$155.00HG-MCTAR18 Retail .$167.50HG-MCTAR17X Retail .$179.00

FF-MCTAR21 Retail .$224.95FF-MCTAR20X Retail .$217.75FF-MCTAR20 Retail . . . .$184.99FF-MCTAR23 Retail . . . .$164.95

FF-249-15 Retail . . . .$45.00

Page 13: DPMS Barrels 050-066

HANDGUARDS

For more than 100 years, fins have been used to cool metal objects. Now DPMS Panther Arms brings that concept to your A-15 rifle. DPMS Panther Arms introduces the “GlacierGuards™” an AP4style handguard that utilizes 15 internal fins, rather than the standard aluminum double-shield, for heat dispersion. These unique fins, while dispersing the heat generated by rifle fire, also provide unsurpassed strength and rigidity for the handguard. Externally, the “GlacierGuards™” feature 15 ribs that mirror the internal fins, and provide the shooter an enhanced grip.

The “GlacierGuards™” accommodate barrels with diameters less than one inch, namely the militarycontoured barrel and the industry standard heavy barrel. Made of a high tech, temperature resistantpolymer that withstands temperatures greater than 500 degrees. This allows the handguards to resistover-heating after continuous fully-automatic fire for over 200 rounds. The fiber-reinforced polymer provides additional strength and rigidity and keeps the handguards’ weight at just one half pound perpair, compared to the standard .4 pounds per pair. US Patent # 6,945,154.

“GlacierGuards™”

“No metal heatshield required!”

US Patent # 6,945,154

“GLACIERGUARDS™”

• Custom formed lead weight for the bottom half of the A2 handguards-DCM Handguards.• Adds 3.334 lbs. to your handguard for extra weight and accuracy.• No shipments to California

DCM NATIONAL MATCH FREE FLOAT TUBES& HANDGUARDS

CUSTOM FORMED LEAD WEIGHT

Small oval design, glass filled polymer. Single wall, anodized heat shield. Tight fitting. Black in color.

AP4 HANDGUARD

Made by Command Arms Accessories. The M33 is built to fit the M16/AR15 carbine. Replace yourexisting hand-guard with this polymer handguardwhich provides 2 mounting rails, complete with 2Vented and 2 Non-Vented thermal rubber rail covers and heat shields. No tools or gunsmithingrequired, handguard mounts just like factory handguards. Rails can be mounted on the left/right side, or the top/bottem of the handguard.

LIFETIME WARRANTY

M-33 HANDGUARDS

Double walled heat shield AP4 handguard. Mil-Spec. Large Oval Design!

MIL SPEC. AP4 HANDGUARD

Carbine Length.Polymer and aluminum handguards.

• 4-sided Picatinny rail system• Metal heatshields dissipate high

tempertures producted during sustained rapid fire.

• Thermal rubber covers enhance grip and protect rails when not in use.

• No gunsmithing required, handguardsmounts just like factory handguards.

• FREE RAIL COVERS INCLUDEDLIFETIME WARRANTY

M-44 HANDGUARDS, CARBINE LENGTH

The SureFire® 4-Rail M73 Handguard System.Four (4) rail covers included.

M73 QUAD RAIL FROM SUREFIRE

“Mil-Spec!”

Free floating handguards are used by those that want the best accuracy, but free float tubes in the past did not meet the requirements for DCM matches, and they look different. Now DPMS has a replacement free float tube that replaces the factory handguards and looks the same as the factory. Easy to install for better accuracy. Includes swivel rivet.

Replace your EM-16/A-15 handguard for better accuracy.

“DCM”

Standard Length. Polymer handguards. • 4-sided Picatinny rail system• Metal heatshields dissipate high tempertures producted during sustained rapid fire.• Thermal rubber covers enhance grip and protect rails when not in use.• No gunsmithing required, handguards mounts just like factory handguards.• 2 Vented and 2 Non-Vented Rail covers included.

LIFETIME WARRANTY

M-44 HANDGUARDS, STANDARD LENGTHHG-M44C = BLACK

HG-M44CODG = OD GREENHG-M44CTAN = TAN

POLYMER

HG-M44SM = BLACK

ALUMINUM

62

AC

CE

SS

OR

IES

-HA

ND

GU

AR

DS

“DCM”

HG-M44SM Retail . . .$105.99

HG-M44S = BLACKHG-M44SODG = OD GREEN

HG-M44STAN = TAN

Retail . . . . . . . . . . . . . . .$129.95 Retail . . . . . . . . . . . . . . . .$99.95

FF-M73 Retail . . . . .$199.00

BL-02 Retail . . . . .$19.95 HG-M33 Retail . . . . . .$84.99

HG-MD Retail . . . . . .$27.95

FF-DCM Retail . . . . .$151.95

BL-FGT Retail . . . . . .$44.95

TAN

BL-FGG Retail . . . . . .$44.95

OD GREEN

BL-FG Retail . . . . . .$39.95

BLACK

BL-02AP4 Retail . . . . .$69.95

Page 14: DPMS Barrels 050-066

XTA Tactical, lightweight vertical grip will attachto Picatinny rails. Comes with a 6” mounting railfor standard handguards. Made by the John Masen Company.

MASEN VERTICALGRIP W/RAIL

VERTICAL GRIPS

VERTICAL FORWARDGRIP (POP BOTTLE)

This grip is actuated with the push of a button. Itlocks securely in the folded and battle-ready positions. Designed to function properly even under strenuous military use. Installs easily on any Picatinny rail with the use of the supplied socket head cap screw.

YANKEE HILL QUICKACTION FOLDING GRIP

Graphite vertical grip with aluminum lock downpost. Available in black, OD green and tan.

SOG GRAPHITE VERTICAL GRIP

Permits the operator to get "on target" faster andimproves muzzle control during rapid fire. Allowsthe weapon to be held with a natural fightingstance. Fits any Weaver or Picatinny rail. Interiorof grip serves as a plugged storage compartment.No tools or gunsmithing required.

LIFETIME WARRANTY

VERTICAL GRIP, PICATINNY RAIL

STANDARD VERTICALGRIP by COMMAND ARMS

Distinctive ergonomically designed tacticalvertical grips.

• Facilitates natural fighting stance holds on your rifle

• Improved performance and reaction time, reduces “on target” time increases muzzle control during rapid fire

• Ergonomically designed with finger grooves• Plugged storage compartment

LIFETIME WARRANTY

Forward Grip with Magazine Holder combines forward gripand magazine holder. Quick release or secure bolt attachment. Left side magazine release button. Lightweight polymer construction.

FRONT GRIP MAG HOLDER

VERTICAL GRIP BYCOMMAND ARMS

Vertical Ergonomic Grip by Command Arms. Quick, detachable with 3-battery storage compartments. Screw driver required. Available in black, OD green and tan.

Forward grip for mounting on the 4 Rail Free Float Tube. Quickly attaches and detaches withthumbscrew. ALUMINUM!

HAND GRIP FOR 4-RAILFREE FLOAT TUBE

Distinctive ergonomically designed tacticalvertical grips.

• Facilitates natural fighting stance holds on yourrifle

• Improved performance and reaction time, reduces “on target” time increases muzzle control during rapid fire

• Ergonomically designed with finger grooves• Plugged storage compartment

LIFETIME WARRANTY

ERGONOMIC VERTICALGRIP by COMMAND ARMS

• Vertical & Horizontal tactical grip, push buttonrelease converts grip from horizontal to vertical

• Ergonomic design• Skeletonized for reduced weight• Folds under so it is out of the way when not in

useLIFETIME WARRANTY

FOLDING VERTICALGRIP by COMMAND ARMS

Vertical Forward Grip by ERGO. Ejection molded,slides onto standard Picatinny or Weaver rail. Set-screw retention. Extremely tough. Black.

Vertical foregrip attaches to the Picatinny rail onthe forearm and provides a laser beam upon gripping.

VERTICAL LASER GRIPCRIMSON TRACE

Also available in

Tan and OD Green.

Also available in

Tan and OD Green.

Also available in

Tan and OD Green.

AC

CE

SS

OR

IES

-VE

RT

ICA

L G

RIP

S

63

VG-VG1 Retail . . . . . .$29.99VG-SVG Retail . . . . . .$19.99VG-AVG Retail . . . . . .$19.99VG-FFG2 Retail . . . . .$33.99

LS-VG Retail . . . . .$399.95VG-4253 Retail . . . . . .$15.00FF-GR Retail . . . . . .$59.95HG-MG Retail . . . . . .$17.95

FAB-FGMH Retail . . . . .$44.95Retail . . . . . . . . . . . . . . . .$25.95VG-YHM-9640 Retail . . .$74.50Retail . . . . . . . . . . . . . . . .$39.95

VG-1002-B = BLACKVG-1002-G = OD GREEN

VG-1002-T = TAN

VG-BVG = BLACKVG-BVGG = OD GREEN

VG-BVGT = TAN

Page 15: DPMS Barrels 050-066

64

AC

CE

SS

OR

IES

-BA

YO

NE

TS

HANDGUARD ACCESSORIES,BAYONETS

RAIL COVERS

Pac-Skin™ is a new generation of non-slip, sure gripping rubber technology. This “peel-n-stick” rubber material provides the “ultimate gripping surface” on those items where improving the grip was difficult, if not impossible, in the past. Afinely textured neoprene rubber surface coupled with a “peel-n-stick” adhesive backing makes a perfect accessory for your favorite rifle. Two pieces - Pistol grip and Forend.

SURE GRIP

• Provides rubbery grip surface.• Protects the operator from sharp rail edges. • Protects unmounted rail areas from damage. • Prevents damage to gear

MAGPUL RAIL COVERS

• 8” blade, Blade .200” thick, 13-1/4” OAL• Phosphate non-reflective surface• 1-3/4” Mission Serration• Fits the EM-16, AP4 & A-15Dynaflex® handle reduces hand fatigue withpositioning access point.

MARINE OKC3S BAYONET

• 7” blade, Blade .235” thick, 12-1/8” OAL• Black oxide non-reflective surface• Milled sawteeth on back

Textured thermoplastic nylon handle and scabbard.Equipped with a quick release military holster.

M9 BAYONET & SCABBARD/CAMO

Military production M-7 style bayonet. Parkerized finish.

M-7 BAYONET

Available in two sizes. Fits over the barrel in front of the sight. (2pc. construction)

• Lightweight A1 Barrel .570” dia. BL-LUG• Heavy Barrel A2 .725” dia. BL-LUG-H

BAYONET LUG ADAPTER

Military production scabbard for the M-7 bayonet. Black plastic with tie straps.

M-10 SCABBARD

Full Rail CoverFF-4361BK BlackFF-4361OD OD GreenFF-4361CB Coyote Brown

• Medium Length• Covers 10 slots

Low Profile Rail CoverFF-4373BK BlackFF-4373OD OD GreenFF-4373CB Coyote Brown

• Long Length• Covers 18 slots

Full Rail CoverFF-4362BK BlackFF-4362OD OD GreenFF-4362CB Coyote Brown

• Long Length• Covers 15 slots

Full Rail CoverFF-4360BK BlackFF-4360OD OD GreenFF-4360CB Coyote Brown

• Short Length• Covers 5 slots

These covers can be used to form a very low profile grip and protect the unmounted rail area from damage. Made from Santoprene, these covers have a rubbery surface and are easily shortened by cutting to length. Available in a variety colors and textures. Prices reflect individual piece prices. Sold individually. Made byFalcon Industries.

Low Profile Rail CoverFF-4370BK BlackFF-4370OD OD GreenFF-4370CB Coyote Brown

• Short Length• Covers 5 slots

Each rail cover covers 15 slots of rail

• 7” blade, Blade .235” thick, 12-1/8” OAL• Black oxide non-reflective surface• Milled sawteeth on back.

Textured thermoplastic nylon handle and scabbard.Equipped with a quick release military holster.

M9 BAYONET & SCABBARD

The new unit weighs 15% LESS then the current standard M9 model by using a special high grade stainless steel alloy with aluminum interior components. Performance and balance are exceptional with this new model.

M9 LIGHT WEIGHT BAYONET & SCABBARD

This unique tactical grip allows the operator to use his 1" Flashlight. The most ergonomically designed vertical foregrip.• Has storage compartment for batteries, cleaning

kit, etc.• A 1" flashlight mount is incorporated along with

an On/Off Trigger located on the grip itself. (No need for bulky and pricey pressure switches)

• Fits any weapon with a weaver or picatinny rail.• Mounted using a quick release locking system

with an additional locking screw as backup.• No gunsmithing required.• Molded from reinforced polymer composite.• Super lightweight.

MAKO FOREGRIPFLASHLIGHT MOUNT

BL-M9G Retail . . . . .$105.00

Retail . . . . . . . . . . . . . . . .$95.00

BL-M9 = BLACKBL-M9T = TAN

Retail . . . . . . . . . . . . .$11.95/ea.

FF-MAG012-BLK = BLACKFF-MAG012-DKE = DARK EARTH

FF-MAG012-OD = OD GREEN

Low Profile Rail Cover, Short

Retail . . . . . . . . . .$4.95/EA. PC.

Retail . . . . . . . . . .$4.95/EA. PC.

Full Rail Cover, Short

Retail . . . . . . . . . . . . . . .$110.00

Low Profile Rail Cover, Long

Full Rail Cover, Long Length

Retail . . . . . . . . .$12.00/EA. PC.

Retail . . . . . . . . .$12.00/EA. PC. Retail . . . . . . . . . .$8.00/EA. PC.

Full Rail Cover, Medium

Heavy Barrel A2

Lightweight A1 Barrel

BL-LUG Retail . . . . .$19.95

BL-M7S Retail . . . . . .$13.50

BL-M7 Retail . . . . . .$29.95BL-OKC3S Retail . . . .$149.95

PS-RGS Retail . . . . . .$9.98

BL-LUG-H Retail . . . . .$19.95

BL-M9UC = URBAN CAMOBL-M9DC = DESERT CAMO

OD GREEN

Retail . . . . . . . . . . . . . . .$115.00

BL-M9LW = BLACKBL-M9LWT = TAN

BL-M9LWG = GREEN

VG-TGRIP Retail . . . . .$77.99

Page 16: DPMS Barrels 050-066

REAR SIGHTS

REAR SIGHTS/REAR APERTURES

TRIPLE LOW RAILDETACHABLE SIGHT

A combination of a Tri-Rise riser with a rear A2 adjustable sight assembly. Featuring Picatinny style rails on the top, left and right of the riser. This allows you to attach an optic to the top of the rail to be in coaxial line of sight with the rear sight assembly and also allows you to attach other rail-mounted accessories to the side of the riser. Made from 6000 Series heat-treated aluminum.

A combination of a Tri-Rise riser with a rear A2 adjustable sight assembly. This High Rail system is approximately 1/2” higher than the Low Rail series. This allows you to attach an optic to the top of the rail and other rail mounted accessories such as flashlights and lasers. Made from 6000 Series heat-treated aluminum.

TRIPLE HIGH RAILDETACHABLE SIGHT

Unique, new, flip-up sight for AR-style rifles is one ofthe most versatile available. Key features include:rock-solid 2 bolt mounting system, bi-directionaladjustment for both windage and elevation, positivemount in the upward position, improved sight picture with a large aperture peep sight. The sightwill mount on any standard Weaver or Picatinny rail.

Manufactured by Midwest Industries.• 6061 aluminum• Locking detent in the “up” position• Windage knob same as standard AR,

NO ELEVATION ADJUSTMENT

Attaches to various flattop upper receivers. Designed using the Picatinny rail system. Aluminum & steel construction. Height of sight will line up with standard front sights. Made by DPMS.

• 300 meters plus of elevation - Not 800. Not intended for long range. Backup iron sights only.• LR-308 rifles ship with 6/3.

DETACHABLE REAR SIGHT

Our patented “Mangonel” Rear Sight has two legs that flip up and down. Each leg is supported by each other. Fast and accuracte sight acquistion. Excellent back-up, close quarter near sight assembly. U.S. Patent No. 6,732,467.• Slimline and flat • Easy to raise and lower with positive lock in upright position• Adjustable windage • Aluminum base with steel legs• 1/8” diameter aperture • Fixed elevation for simplicity (Std. A2 aperture height)• Detachable assembly • Picatinny capable

MANGONEL FLIP-UP REAR SIGHT

MANGONEL REAR SIGHT

FLIP-UP REAR SIGHT WILSON COMBATREAR FLIP-UP SIGHT

MANGONEL SIGHT KITKit contains both the Front & Rear

Mangonel sights.

U.S. PATENT # 6,732,467

Features small long-range aperture with standard A2 large short-range aperture.

• UR-27-NM .046 and .200 dia. • UR-27A-NM .052 and .200 dia.

Also available is an aperture with both holes undersized• UR-27B-NM .040 and .030 dia.

NM REAR APERTURES

3-Dot green front & rearnight sights for M16/AR15.Installation tool included.Green lamps are warrantedfor 12 years from the date ofmanufacture. The bright-ness obtained from the tri-tium content is focusedthrough the sapphire lens togive the maximum possibleillumination. Sight bladesare machined from steel notcast.

New DPMS Hooded Aperture sight with a .040diameter peep hole. 8620 steel, interchangeable with your A2 rear sight assembly.

• Both apertures are bored on the same plane.• Larger “Ghost ring aperture” has a .230 inner

dia. and a .070 wall thickness for greater lighttransmission.

• The smaller “precision aperture” has a .100 inner dia. with a .100 wall thickness which allows shooter to obtain a more precise zero.

• Drop-in replacement for A1 or A2 rear sights.• Made of 416 Stainless steel, heat treated to

rockwell 20, blackened with a matte finish.

XS SIGHT SYSTEMS A-15GHOST RING APERTURE

HOODED APERTURE SIGHT

TRIJICON AR15NIGHT SIGHT SET

Front Sight

SightSet

65

AC

CE

SS

OR

IES

-RE

AR

SIG

HT

S

FS-CP25F Retail . . . . .$54.95

RS-GR Retail . . . . .$34.95 Retail . . . . . . . . . . . . . . . .$14.95 AP-HA Retail . . . . .$14.95 FS-CP25 Retail . . . . .$79.95

RS-LR Retail . . . . .$99.95 RS-HR Retail . . . . .$99.95 RS-MG Retail . . . .$114.95

RS-MGK Retail . . . .$224.95

FT-RS Retail . . . . .$79.95 RS-MCTERS Retail . . . .$104.99 RS-WF Retail . . . .$179.95

Night Sight - Front Sight Only

Night Sight Set- Front & Rear Sight

Page 17: DPMS Barrels 050-066

1. UR-39-NM NM Rear Base w/Elev. Knob

2. UR-23-NM NM 1/4 Min. Windage Knob

3. UR-27-NM NM .046/.200 Aperature

4. UR-27A-NM NM .052/.200 Aperature

5. UR-27B-NM NM .030/.040 Aperature

6. UR-34-NM NM Elevation Knob (steel)

7. UR-33A 6/3 Elevation Index Knob

Replaces standard rear sight to provide 1/4 min. windage and 1/4 min. elevation adjustments. Complete assembly includes choice of aperature.

DPMS NATIONAL MATCH REAR SIGHT

Fine Thread

2

3, 4& 5

1

6,7

Replaces A1 Rear Sight Windage Drum

REAR SIGHTS

REAR SIGHTS/SIGHT TOOLS

A2 REAR SIGHT ASSEMBLY

A1 Front & Rear Sight Adjusting Tool, Steel, 5 prong.

Manufactured by SOG Armory. Used to install A1/A2 style adjustable front sights.

A1 REAR SIGHT ASSEMBLY

Carry handle designed to attach to AR Flattop upper receivers allows use of iron sights. Easily installedand removed. Made from 7075 forged aluminum.

DETACHABLE CARRYING HANDLE

DETACHABLE CARRYING HANDLE, LUGS

A1/A2 FRONT SIGHT POST TOOL

A1 SIGHT ADJUSTING TOOL

TL-A3 Keychain Style A2 TL-A4 Keychain Style A1

Key Ring not included. Ready to install on your keychain.

SIGHT ADJUSTINGTOOL

Quickly snaps on and off. Protects front and rear sights. Made of hard plastic.• Price reflects both front and rear protectors.• Manufactured by Fulton Armory

For use with the EM-16A/A-15A2 rifles. Used to install A2 style adjustable rear sights.

A2 Front Sight Adjusting Tool, 4 prong, Steel.

A2 SIGHT ADJUSTING TOOL

REAR SIGHT INSTALLATION TOOL

FRONT & REAR SIGHT PROTECTORS

RAPIDEX KNOB

NATIONAL MATCH LUG SIGHT LUG

DETACHABLE CARRYING HANDLE LUGS

A2 Rear Sight Assembly

66

AC

CE

SS

OR

IES

-RE

AR

SIG

HT

S

Retail . . . . . . . . . . . . . . . . .$7.95 FS-PC Retail . . . . .$16.95TL-RST Retail . . . . .$34.95TL-A2 Retail . . . . . .$7.95

TL-A1 Retail . . . . . .$7.95TL-9942 Retail . . . . . .$9.95

UR-29NMD Retail . . . . .$29.95 UR-29A Retail . . . . .$29.95

FT-DCH Retail . . . . .$89.95

RETAIL

$74.95$14.95

$14.95$14.95

$14.95

$14.95

$6.95

Complete Assembly, Assembled

UR-38NMA Retail . . . . .$99.95

UR-39A1 Retail . . . . . .$9.00

UR-21 Retail . . . . .$38.00UR-21A Retail . . . . .$15.00