Downloading - TIBCO Product Documentation

TIBCO Spotfire® Web Player

Release Notes

Software Release 4.5.0 May 2012

Important Information

SOME TIBCO SOFTWARE EMBEDS OR BUNDLES OTHER TIBCO SOFTWARE. USE OF SUCH EMBEDDED OR BUNDLED TIBCO SOFTWARE IS SOLELY TO ENABLE THE FUNCTIONALITY (OR PROVIDE LIMITED ADD-ON FUNCTIONALITY) OF THE LICENSED TIBCO SOFTWARE. THE EMBEDDED OR BUNDLED SOFTWARE IS N OT LICENSED TO BE USED OR ACCESSED BY ANY OTHER TIBCO SOFTWARE OR FOR ANY OTHER PURPOSE.

USE OF TIBCO SOFTWARE AND THIS DOCUMENT IS SUBJECT TO THE TERMS AND CONDITIONS OF A LICENSE AGREEMENT FOUND IN EITHER A SEPARATELY EXECUTED SOFTWARE LICENSE AGREEMENT, OR, IF THERE IS NO SUCH SEPARATE AGREEMENT, THE CLICKWRAP END USER LICENSE AGREEMENT WHICH IS DISPLAYED DURING DOWNLOAD OR INSTALLATION OF THE SOFTWARE (AND WHICH IS DUPLICATED IN THE LICENSE FILE) OR IF THERE IS NO SUCH SOFTWARE LICENSE AGREEMENT OR CLICKWRAP END USER LICENSE AGREEMENT, THE LICENSE(S) LOCATED IN THE “LICENSE” FILE(S) OF THE SOFTWARE. USE OF THIS DOCUMENT IS SUBJECT TO THOSE TERMS AND CONDITIONS, AND YOUR USE HEREOF SHALL CONSTITUTE ACCEPTANCE OF AND AN AGREEMENT TO BE BOUND BY THE SAME.

This document contains confidential information that is subject to U.S. and international copyright laws and treaties. No part of this document may be reproduced in any form without the written authorization of TIBCO Software Inc.

TIBCO, The Power of Now, TIBCO Spotfire Web Player are either registered trademarks or trademarks of TIBCO Software Inc. in the United States and/ or other countries.

All other product and company names and marks mentioned in this document are the property of their respective owners and are mentioned for identification purposes only.

THIS SOFTWARE MAY BE AVAILABLE ON MULTIPLE OPERATING SYSTEMS. HOWEVER, NOT ALL OPERATING SYSTEM PLATFORMS FOR A SPECIFIC SOFTWARE VERSION ARE RELEASED AT THE SAME TIME. SEE THE README FILE FOR THE AVAILABILITY OF THIS SOFTWARE VERSION ON A SPECIFIC OPERATING SYSTEM PLATFORM.

THIS DOCUMENT IS PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT.

THIS DOCUMENT COULD INCLUDE TECHNICAL INACCURACIES OR TYPOGRAPHICAL ERRORS. CHANGES ARE PERIODICALLY ADDED TO THE INFORMATION HEREIN; THESE CHANGES WILL BE INCORPORATED IN NEW EDITIONS OF THIS DOCUMENT. TIBCO SOFTWARE INC. MAY MAKE IMPROVEMENTS AND/ OR CHANGES IN THE PRODUCT(S) AND/ OR THE PROGRAM(S) DESCRIBED IN THIS DOCUMENT AT ANY TIME.

THE CONTENTS OF THIS DOCUMENT MAY BE MODIFIED AND/ OR QUALIFIED, DIRECTLY OR INDIRECTLY, BY OTHER DOCUMENTATION WHICH ACCOMPANIES THIS SOFTWARE, INCLUDING BUT NOT LIMITED TO ANY RELEASE NOTES AND "READ ME" FILES.

This Product is covered by U.S. Patent No. 6,014,661 and 7,216,116.

Copyright © 2006-2012 TIBCO Software Inc. ALL RIGHTS RESERVED.

TIBCO Software Inc. Confidential Information

| i

TIBCO Spotfire Professional Release Notes

Contents

Preface............................................................................................................................................. ii

Typographical Conventions ....................................................................................................... iii

Connecting with TIBCO Resources........................................................................................... iv

How to Join TIBCOmmunity .............................................................................................. iv

How to Access All TIBCO Documentation ...................................................................... iv

How to Contact TIBCO Spotfire Support ......................................................................... iv

Release Notes .................................................................................................................................. 1

New Features .............................................................................................................................. 2

Release 4.5.0 ........................................................................................................................ 2

Changes in Functionality ............................................................................................................ 3

Release 4.5.0 ........................................................................................................................ 3

Deprecated and Removed Features ............................................................................................. 4

Release 4.5.0 ........................................................................................................................ 4

Migration and Compatibility....................................................................................................... 5

Release 4.5.0 ........................................................................................................................ 5

Closed Issues ............................................................................................................................... 6

Known Issues .............................................................................................................................. 8

| ii


Preface

Topics

Typographical Conventions, page iii

Connecting with TIBCO Resources, page iv

| iii


Typographical Conventions

The following typographical conventions are used in this manual.

General Typographical Conventions

Convention Use

code font Code font identifies commands, code examples, filenames, pathnames, and output d isplayed in a command window. For example:

Use MyCommand to start the foo process.

bold code

font

Bold code font is used in the following ways:

In procedures, to ind icate what a user types. For example: Type admin.

In large code samples, to ind icate the parts of the sample that is of particu lar interest.

In command syntax, to ind icate the default parameter for a command. For example, if no parameter is specified , MyCommand is enabled : MyCommand [ enable | disable]

italic font Italic font is used in the following ways:

To ind icate a document title. For example: See Concepts.

To introduce new terms For example: A portal page may contain several portlets. Portlets are mini-app lications that run in a portal.

To ind icate a variable in a command or code syntax that you must replace. For example: MyCommand PathName

Key combinations Key name separated by a p lus sign ind icate keys pressed simultaneously. For example: Ctrl+C.

Key names separated by a comma and space ind icate keys pressed one after the other. For example: Esc , Ctrl+Q.

The note icon ind icates information that is of special interest or importance, for example, an add itional action required only in certain circumstances.

The tip icon ind icates an id ea that could be useful, for example, a way to app ly the information provided in the current section to achieve a specific result.

The warning icon ind icates the potential for a d amaging situation, for example, data loss or corruption if certain steps are taken or not taken.

| iv


Connecting with TIBCO Resources

How to Join TIBCOmmunity

TIBCOmmunity is an online destination for TIBCO customers, partners, and resident experts, a p lace to share and access the collective experience of the TIBCO community. TIBCOmmunity offers forums, blogs, and access to a variety of resources. To register, go to http:/ / www.tibcommunity.com .

How to Access All TIBCO Documentation

After you join TIBCOmmunity, you can access the documentation for all supported product versions here:

http:/ / docs.tibco.com/ TibcoDoc

How to Contact TIBCO Spotfire Support

For comments or problems with this manual or the software it addresses, p lease contact TIBCO Spotfire Support as follows.

For an overview of TIBCO Support, and information about getting started with TIBCO Support, visit this site:

http:/ / www.tibco.com/ services/ support

If you already have a valid maintenance or support contract, visit this site:

https:/ / support.tibco.com

Entry to this site requires a user name and password . If you do not have a user name, you can request one.

http://www.tibcommunity.com/

http://docs.tibco.com/TibcoDoc

http://www.tibco.com/services/support

https://support.tibco.com/

Release Notes| 1


Release Notes

Check the TIBCO Prod uct Support web site at https:/ / support.tibco.com for product information that was not available at release time. Entry to this site requires a username and password . If you do not have a userna me, you can request one. You must have a valid maintenance or support contract to use this site.

See the TIBCO® Spotfire® System Requirements web page for a detailed description of the system requirements for TIBCO® Spotfire® 4.5.0.

Topics

New Features, see page 2

Changes in Functionality, see page 3

Deprecated and Removed Features, see page 4

Migration and Compatibility, see page 5

Closed Issues, see page 6

Known Issues, see page 8

https://support.tibco.com/

http://support.spotfire.com/sr_spotfire45.asp

Release Notes| 2


New Features

This section lists features added since the last release of this product.

Release 4.5.0

The following are new features in this release.

Bullet Graph

A bullet graph visualization has been introduced . It is a miniature visualization that can be included in the graphical table or the text area. The bullet graph is considered a superior way of d isplaying information usually visualized by a speedometer. Specifically, bullet graphs are used to compare one value, represented by a horizontal bar, to another value, represented by a vertical line, and relate those to qualitative ranges.

Support for Matlab as Statistics Engine

Via Data Functions it is now possible to take advantage of MATLAB engines connected to TIBCO Spotfire Statistics Services.

Support for SAS as Statistics Engine

Via Data Functions it is now possible to take advantage of SAS engines connected to TIBCO Spotfire Statistics Services.

Enhanced PDF Export

The PDF Export has been improved . There are now options to export visualizations as vector graphics, greatly improving image quality. More options for headers and footers have been added , giving more control of the final result. It is also possible to batch export a series of sheets from one and th e same analysis. A user can select to export several versions of the analysis at the same time, based on filter options and bookmarks.

Release Notes| 3


Changes in Functionality

This section lists changes in functionality since the last release of this prod uct.

Release 4.5.0

The following are changes in functionality in this release.

Improved Spotfire Web Player startup behavior

If the Spotfire Web Player Server cannot reach the Spotfire Server, or if there is an error, during startup, the Spotfire Web Player Server enters a polling mode where it waits for a certain amount of time, then restarts itself.

Improved request performance and simplified configuration

The Web Player application pool now uses managed pipelin e mode Integrated . This improves request performance for ASP.NET requests and makes more of our settings available in web.config, reducing the need to use the IIS Manager for configuration.

Improved request and session management to improve performance when execu ting lots of parallel request in the Web Player. This will increase performance when running many parallel analyses or when using analyses with many plots or plots with many items, like spark lines.

Increased the number of parallel requests that a client can use when calling the Spotfire Server, to increase performance for multiple on -demand data tables.

Improved Scheduled Updates service integration, when using forms based authentication

The web service to update items in Scheduled Updates has been updated to simplify integration with other systems, when using Forms based authentication.

The ASP.NET forms authentication cookie detection setting has changed , to remove a red irect. This removes then need to add the AspxAutoDetectCookieSupport parameter when calling the web service.

Release Notes| 4


Deprecated and Removed Features

Release 4.5.0

Deprecated Features

No features are deprecated in this release.

Removed Features

The following features are removed in this release.

Tickets can no longer be used to transfer authentication between clients

Tickets are no longer used to transfer authentication between clients, when using non single-sign-on based authentication.

In the Tibco Spotfire save to library d ialog, when clicking on the link to the Web Player file, the user must now login to the Web Player, credentials are no longer transferred automatically.

Download ing and opening a file from the Web Player in Tibco Spotfire, now will require the user to login to the server, credentials are no longer transferred automatically.

Release Notes| 5


Migration and Compatibility

This section explains how to migrate from a previous release to this release.

Release 4.5.0

Installation

Follow the instructions in the TIBCO® Spotfire® Web Player 4.5.0 Installation Manual to install TIBCO® Spotfire® Web Player 4.5.0.

Installation Notes

1. Installing the TIBCO® Spotfire® Web Player from a network drive is not possible; the installer must be run locally.

2. While technically possible, it is not recommended to install TIBCO® Spotfire® Web Player on the same machine as the TIBCO® Spotfire® Server. Performance for both prod ucts will be affected negatively, and there are complications concerning port numbers.

3. The installation program creates a virtual d irectory called SpotfireWeb under the Default Web Site in IIS. If there is more than one web site on the server, it is important to select the port for the correct web site during installation, as described in the TIBCO® Spotfire® Web Player Installation Manual.

4. If you want to configure TIBCO® Spotfire® Server 3.3 to use Kerberos authentication, we strongly recommend using port 80, see also KB908209. For add itional information see the Spotfire Server Installation and Configuration Manual.

5. It is particularly important to install TIBCO® Spotfire® Web P layer and TIBCO® Spotfire® Server on separate machines when using Kerberos authentication.

6. Additional information and advice on troubleshooting are available in the installation manual.

http://support.microsoft.com/kb/908209

Release Notes| 6


Closed Issues

The table in this section list issues that were closed in the named releases.

Key Summary

TSWP-2821 Error when opening analysis in Web Player - " Interpretation error

during update (Object expected)"

TSWP-2796 Old Property Control value is (sometimes) used in PDF Export

TSWP-2786 Left Y-axis selector is missing in Web Player view when having

multiple scales.

TSWP-2783 KeepAlive.ashx returns 'OK' even when web player has lost

connectivity to server.

TSWP-2774 Link renderer cannot create links containing values with spaces.

TSWP-2768 Hierarchy Checkbox filter generated from on-demand not working.

TSWP-2760 Filters panel not scrollable in Safari on iPad.

TSWP-2746 Date and weekday does not match in Web Player range filter for

DataType Date.

TSWP-2732 Crash when displaying Tooltips in Web Player.

TSWP-2723 Error message thrown when choosing Unmark Marked Rows action

link, if active/highlighted visualization is not marked table.

TSWP-2720 Checkbox filter not working properly in Web Player when opened in

Firefox 9 and IE9.

TSWP-2697 Crash when large number of nodes resulting from a plot axis

expression

TSWP-2494 One-finger scrolling is missing from Text Areas on iPad.

TSWP-2365 Web Player Size on iPhone Safari should not include URL bar.

Release Notes| 7


TSWP-2322 Link renderer doesn't work in the Web Player if URL contains

brackets.

Release Notes| 8


Known Issues

The table in this section lists known issues in this release.

Key Summary/Workaround

Summary If JavaScript is d isabled in the web browser, analysis files will not appear and the app lication cannot be used .

Workaround None

TS-24512 Summary When exporting a map chart to PDF using vector graphics, the map is not rendered correctly.

Workaround Use raster graphics when exporting a map to PDF.

TS-24601 Summary Tiled markers in a scatter p lot have a line d rawn d iagonally over them when exporting to PDF.

Workaround None

TS- 24535 Summary Bars d isappear (or become too thin to see) when exporting to PDF, when there are many bars in a bar chart.

Workaround Use raster graphics when exporting to PDF.

TS-24479 Summary Exporting a heat map with many rows to PDF with vector graphics becomes “empty”.


TS-24502 Summary When exporting a table visualization with columns rendered as links to PDF, the underline will become a strikethrough.


TS-24395 Summary Hebrew characters in visualizations and header or footer are not correctly rendered in exported PDF.

Workaround None

Summary If session cookies are turned off in the web browser, a "Communication error in Ajax.poll" error may occur when trying to open an analysis file.

Workaround None

Summary If regular cookies are turned off in the web browser, the Remember Me function will not work properly.

Workaround None

Summary If you use impersonation between a TIBCO® Spotfire® Web Player and a TIBCO® Spotfire® Server that uses NTLM authentication, the impersonator account (that is username and password) must only contain US ASCII characters. This is not applicable to end user accounts.

Workaround None.

Summary If the TIBCO® Spotfire® Web Player and the TIBCO® Spotfire® Statistics Services is installed on the same machine (with IPV6 installed), make sure that the address does not contain localhost. For example, if it is set to http:/ / localhost:8080/ SplusServer, change it to http:/ / 127.0.0.1:8080/ SplusServer.

Workaround None

Summary If the TIBCO® Spotfire® Web Player is configured to use certificates it is not possible to login with an iPad using the iOS version

Release Notes| 9


Key Summary/Workaround 3.2.2.

Workaround None

Summary Analysis files that require prompting, other than prompted information links, are not supported in the TIBCO® Spotfire® Web Player.

Workaround None

Summary Value renderers developed with the TIBCO® Spotfire® 2.2 API are not supported .

Workaround None

Summary A cond itional coloring rule based on a custom expression includ ing a property will be initially d isabled when the analysis is opened . Once the property value is updated (typically through a property control on a Text Area), the rule will be evaluated and applied to the visualization.

Workaround None

Summary Using the built-in zoom function in Internet Explorer 7.0 or later may affect the interaction in such a way that marking in visualization d oes not follow the movement of the mouse pointer.

Workaround None

Downloading - TIBCO Product Documentation

Documents

Transcript of Downloading - TIBCO Product Documentation