Downloaded from ...103.17 103. IB 1 03. 19 103. 20 103.21 103.22 103.23/103.24 103.25/103.26 OATE 2...
Transcript of Downloaded from ...103.17 103. IB 1 03. 19 103. 20 103.21 103.22 103.23/103.24 103.25/103.26 OATE 2...
l—
17WCR=Wm I. .
NIL- STD-1353BNOTICE 412 f4Sy 1989
MILITARY STANDARD
ELECTRICAL CONNECTORS, PLUG-IN SOCKETSANO AS SOCIATEO HAROUARE, SELECTION ANO USE OF
TO ALL HOLOERS OF 141L- STO- 13538
1. THE FOLLOWING PAGES OF MI L. STO-1353B HAVE 8E[N REVISEO ANO SUP ERSEOE THEPAGES LISTEO:
-.
I
2.
3.
NEW PAGE
1 /.
:a103.1103.2103.3 /103.4103.11103.12103.13103.14103.15103.16103.17103. IB103.19103.20103.21103.22103.23/103.24103.25/103.26
OATE
12 May 198912 May 198912 May 19892 July, 1980
12 May 19B912 Way 1989
2 JUIY 198012 tlay-12 May12 May12 May12 t4ay12 May12 May12 Mav12 Haj12 May12 May12 May12 May
RETAIN THIS NOTICE ANO INSERT
SUPERSEOEO PAGE ~
1 7 August ‘19842 7 August 1984
--- NEU PAGE“103.1 REP RINTEO UITHOUT CHANGE
103.2 2 July 1980103.3 and 103.4 2 July 1980
103.11 REP RI NTEO klITHOUT CHANGE103.12 2 July 198d103.13 2 JUIY 1980103.14 2 Julj 1980103.15 2 July 1980103.16 2 July 1980103.17 2 July 19B0103.1B 2 July 19B0103.19 2 Julv 19B0;::.;! 2 Jul; 1980
2 July 1980103:22 2 July 1980
103.23 and 103.24 2 July 19B0103.25 and 103.26 2 July 1980
BEFORE THE TABLE OF CONTENTS.
Holders of MI L.s To-1353B wjll verify that page than es and additionsindicated above have been entered. YThis notice page WI 2. be retained as a checksheet. This issuance, together with appended pages, is a separate publication.Each notice is to be retained by stockinq vofnts until the ❑ilitary standard 1scompletely revised or cancel ed. ”
-.
AMSC N/AOISTR18UTION STATEMENT A.
lofz’ApprOved fOr public release; distribution is un!~~i;~~?
Downloaded from http://www.everyspec.com
—
MI L- ST D-1353BNOTICE 4
CONCLUOING MATERIAL
Custodians: Pr;~;; f~gEgctiv{ty:Army - CRNavy - EC //.Air Force - 85 Agent:
OLA - ES
Review activities:Army - MI (Project 5935-3688)Navy - AS, OS, SHAir Force - 11, 17, 99OLA - ES
User activities:Army - AV. MENavy - MCAir Force - 19
Downloaded from http://www.everyspec.com
I
I
I
I
MI L. ST O-1353BNOTICE 4
,-
1. SCOPE
1.1 *. This standard establishes requirements for select ton of electricalconnectors, plug-in sockets, and their associated hardware, shown in detail fnsections 100, 200, 300, and 400. for use in military equipment. Included are thefollowing:
a.
b.
Selected electrical connector types and associated hardware chosen jointlyby the Departments of the Army, the Navy, and the Afr Force for use in thedesign of military equipment.
Guides for the choice and apvlicat(on of electrical connectors andassociated hardware For use” in military equipment
Complete detailed requirement s’ for electrical connectors, plug-in sockets, andassociated hardware listed in this standard are covered in the applicablespeclffcat{on sheets or MS sheets [see 4.2). Iihen it has been determined thatequipment requirements cannot be met by using the connector styles orcharacteristics listed in this standard, the design engineer with the approval ofthe cogntzant military activity, should select from the applicable connectorspecification, styles or characteristics not listed herein.
1.2 Purpose of standard. The purpose of this standard is to promote the useof stanaard parts for new equipment design. The standard parts cover themajority of uses and are arranged in a form for quick references and selection.The applicable connector specification shall be used for specific design details.
1.Supersedes page 1 of Notice 2.
Downloaded from http://www.everyspec.com
!41L-STD-1353BNOTICE 4
2. REFERENCED 00 CEMENTS
2.1 Government documents.
2 .1.1 Specifications and standards.followtng specltlcati
Unless otherwfse specified, theons and standards of the issue listed in that issue of the
Department of Oefense Index of Specifications and Standards specified tn thesolicitation form a part of th{s standard to the extent specified herein.
SPECIFICATIONS
FE OERAL
‘d-C-596
fiILITARY
MI L-C-17
MI L-c-3432
MI L. C-5015
MI L-S-12883
MI L-C-21097
MI L-C-22992
MI L-c-24308
MI L-C-28731
MI L-c-28748
MI L-c-28840
MI L-C-38999
000-c-38999/20 -
00 D-C-38999/21 -
Connector, Plug. Receptacle and Cable Outlet, ElectricalPower, General specif~cation for.
Cable, Radio Frequency, Flexible and Semirigid, GeneralSpecification for.Cable and Mire, Electrical (Power and Control;Semi flexible, Flexible and Extra-Flexible, 300 and 600volts).Connectors, Electrical, Circular Threaded, GeneralSpecification for.Socket and Accessories For Plug.in ElectronicComponents, General Specification for.Connector, Electrical, Printed Wiring Board, GeneralPurpose, General Specification for.Connectors, Plugs. and Receptacles, Electrical,Waterproof, Quick Disconnect, Heavy Duty Type, GeneralSpecification for.Connectors, Electrical, Rectangular, Miniature PolarizedShell , Rack and Panel, General Specification for.Connectors, Electrical, Rectangular, Removable Contact,Formed Blade, Fork Type (For Rack and Panel and otherApplications), General Specification for.Connectors, Electrical, Recta ngular., Rack and Panel,Solder Type and Crimp Type Contacts.Connector Electrical, Circular Threaded, High Density,High Shock Shipboard, Class D, General Specification for.Connectors, Electrical, Circular, Miniature, HighOensity , Quick Oiscon”ect (Bayonet, Threaded, and BreechCoupling), Environment Resistant, Removable Crimp andHermetic Solder Contacts, General Specification for.Connectors, Electrical, Circular, 14iniature, HighOensity, Quick Disconnect [Bayonet, Threaded, and .BreechCoupling), Environment Resistant, Removable Crimp andHermetic Solder Contacts, Receptacle, Mall Movnti”gFlange, Triple Start Threaded Coupling, Removable CrimpContacts, Series 111, Metric.Connectors, Electrical. Circular. Miniature. HiahOensity, Quick Disconnect (Bayonet, Threaded, a~d BreechCoupling), Environment Resistant, Removable Crimp andHermetic Solder Contacts. Recepta le. Box MountingFlange, Hermetic, Triple Start Th eaded Coupling,
.Hermetic Solder Contacts. Series 11, Netric.
Supersedes page 2 of Notice 2. 2
Downloaded from http://www.everyspec.com
DO O-C-38999/23
000-C-38999124
NE!d PAGE
M[L-STD-1353LI ,-NOTICE 4
Connectors, Electrical, Cfrcular. Miniature. nighOensity, Quick Oiscohnect (Bayonet, Threaded, and BreechCoupling), Environment Resistant, Removable Crimp andHermetic Solder Contacts, Receptacle, Jam-Nut Mounting,Nermetic, Triple Start Threaded Coupling, HermeticSolder Contacts, Series 111, Metric.Connectors, Electrical, Circular, niniature, HighOensity, Quick Ofsconnect [Bayonet, Threaded, and BreechCoupling) , Environment Resistant, Removable Crimp andHermetfc Solder Contacts, Receptacle, Jam-Nut Mounting,Triple Start Threaded Coupling, Removable CrimpContacts, Series 111, Netric.
,.
2a
Downloaded from http://www.everyspec.com
I
Applicabledocuments
MI L-C-24308
Class G
Class N
Class H
MI L- ST D-1353BNOTICE 4
SECTION 103
CONNECTORS, RACK AND PANEL
ApplicableApp licable characteristics restrictions ~
-This specification covers the 103.4general requirements for miniaturerectangular connectors andaccessories.
-Contacts”: Crimp2; r ;j~derContact stzes: ,Temperature range: -55”c to +125° C
-Intended use: Class G connectorsare intended for use in non-environment resisting applicationswhere the op$rating temperaturerange of -55 C to +125 C isexperienced.
-Contacts: Soldejoorz; jimp.Contact sizes:Temperature range:’ -55”c to +125° C
-Intended use: Class N connectorsare intended for use in applicationswherein presence of residual magnetismmust be held to very low levels toavofd interference with nearby sensitiveinstrumentation.
-Contacts: SolderContact size: 20Temperature range: -55°c to +125° C
-Intended use: Class H receptaclesare intended for use in applicationswherein atmospheric pressures mustbe contained by the connectors acrossthe wall or panels they are mounted on.
MI L-C-28731 -This specification coversrectangular, electrical connectorsintended for use in electronicand electrical equipment.
-Contacts: Removable, formedblade, crimp fork type, solder holefork type, wrappost fork type.Contact wire sizes: 18-26 AUG.
-Coupling: Jacks crews, jack sockets,fixed screws, and fixed sockets.
103.9
Supersedes page 103.1 of MI L- STD-1353B.103.1
Downloaded from http://www.everyspec.com
MI L- ST D-1353B . .NOTICE 4
Applicable Applicabledocuments Applicable characteristics restrictions !?-?.9S
MI L-c-28748 This specification covers the 103.12general requirements for standardrectangular connectors.COntac Cs: Front release trimContact sizes: 16, 20, and 2 !Couplfng: Long jacks creus
Guide pinsBoss for jacks crewsBoss for guide pfnsFixed jacks crews
IMI L-C-81659 -This specification covers environ-
ment resisting rectangularconnectors with one to fourinserts per connector.
For nonenvfronmentalapplications only.
103.26
Series 2 -Contacts: Rear release removable AF : Not for use.Crimp contact sizes: 9 coax,12, 16, 20, 22 insert: KeystoneshapeTemperature: -65-C to +125-C, Cla S.S [Environmental rack and panel.
MI L- C- B3733 This specification covers thegeneral requirements for mini-atu~e environmental resisting,200 C rectangular connectors.All the types and classes areintermateable under the sameshell size.Contacts: Rear release crtmremovable. Co”tact sizes: !’2, 16,20, 220, 12 shieldedTemperature range: -65° C to +200” CCoupling mounting: Standard hole
Guide pins and springGuide pinsGuide socketsGuide sockets and springCaptive springsClinch nut
103.2B
Bushing
Supersedes page 103.2 of MI L- ST D-1353B.103.2
,
Downloaded from http://www.everyspec.com
I
NIL-sTo-1353BNOTICE 4
MI L-C-24308 PART NUMBER
Part number ‘example: M2430812-341
SYSTEM
Key: M243081XX -xxx~
Military specification sheet i I
Oash number I
Criteria:
Class: G - General purposeN - NonmagneticH - Hermetic
Shell sizes: 1, 2, 3, 4, 5, and6’
Socket contact connectors: M2430811, 2, 5. and 6
Shells and mounting: MS18270, hS18269, MS14058
Insert arrangements: MS14004, MS18273 thru MS18277
Contacts: MI L-C-39029/63, MI L-C-39029/57, MS18281
Pin contact connectors: M2430813, 4, 7, 8, and9
Shells and mounting: MS18271; MS18268, MS18272, f4S14059
l“s. ert arrangements: MS14004, MS18273 thru MS18277
Contacts: MI L-C-39029/64, MI L-C-39029/58, FfS18281
Standard connectors: See table 103-1
I
Supersedes pa c 103.3 and 103.4?of MI L- ST O-13 3B.
103. 3/103.4
I
Downloaded from http://www.everyspec.com
MI L- ST D-1353BNDTICE 4
TABLE 103-11. Standard connectors, MI L-C-28731 type - Continued.
I I INumber of I Type of hardware I Contact type I Part numbercontacts 1428731/
/ /.I
38 I Type F fixed socket { Wg;ost I 12.007756 I Type C jackscrew 13-007356 I Type F fixed socket I Cr{mp56
13-0074I Type C jackscrew I Solder hole I 13.007s
56 I Type F f{xed socket I Solder hole 13.007656 I Type F fixed socket I Urappost I 13-007756 I Type C Jackscrew \ M:; I ;~:g:;j56 I Type F fixed socket56 I Type C JacksCrew I Solder hole56 I Type F fixed socket
14-0075I ,Solder hole / 14-0076
56 I Type F fixed socket90
\ W:; ost 14-0077I Type G jackscrew I 15-0073
90 I Type F fixed socket I Crimp90 I Type G jackscrew
15-0074I Solder hole
9015-0075
I Type F ffxed socket I Solder hole ~ 15-0076I Type F fixed socket
::I Urappost 15-0077
I Type G jackscrew I Crimp I 16-007390 I Type F ffxed socket90
I Crimp 16-0074I Type G Jackscrew I Solder hole II Type F ftxed socket I Solder hole
16-0075
:: I Type F fixed socket I h’rappost16-0076
/ 16-0077120 I Type G jackscrew
.120I Crimp 17-0109
I Type F fixed socket I120
I Crimp 17-0110I Type [ fixed screw I Crimp 17.0111
120 I Type G Jackscrew I120
t Solder hole 17-01121’ Type F fixed socket I SoIder hole I 17-0113
120 I Type E f{xed screw120
I Solder hole I 17-0114I Type F fixed socket
120I Urappost 17-0115
I Type E fixed screw I120
I UrappostI Type G jackscrew I Crimp
17.011618.0109
120 I Type F ffxed socket I crimp 18-0110120 I Type O fixed socket I Crimp i 18-0111120 I Type G jackscrew I Solder hole I 18-0112120 I Type F fixed socket120
I Solder hole 18-0113I Type O jack socket
120I Solder hole I 18-0114
~ Type F fixed socket I Urappost 18.0115I
103.11
Downloaded from http://www.everyspec.com
MI L. ST D-13538NOTICE 4
MI L-C-28748 PART NUMBERING
Part number example: k128748/3-AOALIA
Key: M287481x~
Basic specification number
Insert
.,
.:
SYSTEM
:HfyI 1111
1111— ,,, ,
Shield and shield clamp location ii ii
Shell typeIll1[1
IIJacks crew or guide pins II
Contacts I
Criteria:
Basic: )42874813 connectors using size 16 and 20 cri.n, p removable pin contactsH28748f4 connectors usinq size 16 and 20 crim D removable socket
Insert:
contactsM28748113 connectors using size 22 crimp1428748/14 connectors us~ng size 22 crimp
M2874813-
A-B-c-o-
::G-H-J-K-L-
t428748/4-
M28746/13 M28746/14
A- AE- Bc- c
G- GH- H
Shield and shield clamp location or retaintng
MI L-C-28748/3
Shield
MI L-C-28748/4
Shield
1 - TOII MS1B192 4 - TOP MS181922 - Side MS18192 5. - Side MS181923 - Top MS18193 6 - TOP MS181934 - Side )4s18193 7 - Side MS18193O - None included
removable pin contactsremovable socket contacts
Number of contacts
79
1420263442506675
104
Number of contacts
47
14
plate:
262634
MI L-c.28748/13 and MI L- C.2874”8/14
1-
2-
0-
Shield
Top opening per configuration Eon figure 1Side opening per configurationE on figure 1None included
Supersedes page 103.12 of MIL- STO-13538.103.12
Downloaded from http://www.everyspec.com
MI L- STD-1353BNOTICE 4
f41L-C-28748/3 MI L. C-28748/4
Retaining plateMS18198
6 : MS181997 - f4sl Ei200O - NO shield or
retaining plateincluded.
Retain{ng plateHsl Li191J
2 : i4s181993 - MS18200O - No shield or
retaining plaincluded.
Shell type:lfl L-c-2874813
A-
C - C of MS18203O - 0 of MS18203E - E of HS18203F - F of MS18203G - G of MS18203H - Unpolarized MS18203J - A of MS18204K - B of MS18204L - C of HS18204M - 0 of f4S18204N - E of MS18204P - F of HS18204
te
MI L-C-2874814A-Aot r2T204B-c-o-E-F-G-H-J.K-L-M-N-P-
o - G of HS1B204 fJ -R - Unpolarized MS18204 R-0 - No shell included. o-
,’ uIL-c-28748/13 o-MI L-C-28748/14
B of MS18204C of MS1B204O of MS18204E of MS18204F of MS18204G of MS18204Unpolarized NS1A of MS18203B of MS IB203C of MS18203
Polarization
8204
0 of MS18203 PolarizationE of MS1B203F of MS1B203G of MS18203Unpolarized MS18203No shell included.
None included
Jacks crews or guide ptns: MI L-c-2874813, hIL-C-28748/4.
L - Long jacks crews MS1B194S - Short jacks crews MS1S1194 (Not used with shield)
1
F - Fixed jacks crews MS1B196 (Not used with shield)G - Guide pins MS18197 (Not used with shield)O - No jacks crews or gufde pins tncluded.
I Jack and guide location: The female Jackscrew (turning or f“ixed) or female guidepin shall be located by the “A” or “1’ pin contact.
Jack and guide location:located by the A- socket
Contacts:
Supersedes page 103.13 of
f41L-C-28748/13, MI L-c-28748114
L - Long jacks crews: Conf E, figure 1F - Fixed jacks crews: Conf C, figure 1S - Short jacks crews: COnf O, figure 1G - Guide pins: Conf B, f{gure 1
The jackscrew (turning or fixed) or guide pin shall becontact.
141L-c-2874B13, MI L-C-28748/4
1A - 16 for 16 AMG wire2A - 16 for 20 A!iG wire3A - 20 for 20 AklG wire
“MI L-C-28748/13, t41L-C-2874B/14
1A . 100 percent size 22
MIL- STS-1353B.103.13
I ---- .’1
Downloaded from http://www.everyspec.com
MI L- ST D-1353BNOTICE 4
TABLE 103.111. Standard connectors, MI L-C-28748 type.
ContaitsI I
Number of contacts I Mounting I Part number ~1\ 1428748/3-
17 I Long jackscrews7
I AXXLIAI Long jackscrews I AXXL2Ai Long jacks crews
;I AXXL3A
I Short jackscrews I AXXSIA7 I Short jacks crews7
I AXXS2AI Short jacks crews
7I AXXS3A
I Fixed jacks crews7
I AXXFIAI Fixed .jackscrews I AXXF2A
7 i Fixed jacks crews j ~:;g;;7 I Guide pins7 I Guide pins7 ~ ~~~~e p{ns
I AXXG2AI AXXG3A
77 I None
I AXXOIA
7I AXX02A
i None I AXX03AI Long jackscrews
:I BXXLIA
I Long jacks crews I BXXL2A9 I Long jackscrews9
I BXXL3AI Short jacks crews
9I BXXSIA
I Short jackscrews9
I BXXS2AI Short jacks crews
9I BXXS3A
I Fixed jacks crews I BXXFIA9 I Fixed jackscrews9
I BXXF2AI Fixed jackscrews I BXXF3A
9 I Guide pins9
I BXXGIAI Guide Pins I BXXG2A
9 I Gufde pins9 I None
I BXXG3AI BXXOIA
9 I None I BXX02A9 I None
14I BXX03A
I Long jackscrews14
I CXXLIAI Long jackscrews
14I CXxL2A
I Long jacks crews14
! CXXk3AI Short jacks crews
14I CXXSIA
I Short jacks crews I CXXS2A14 i Short jackscrews I CXXS3A14 I Fixed jacks crews14
I CXXFIAI Fixed jackscrews I CXXF2A
14 I Fixed jackscrews14
I CXXF3AI Guide pins I CXXGIA
14 I Guide pins I CXXG2A14 I Guide Pins I CXXG3A14 I None14 I None
I CXXOIA
14 I NoneI CXX02A
20I CXX03A
I Long jacks crews20
I OXXLIAI Long jacks crews
20I 0XXL2A
I Long jacks crews I 0XXL3A20 I Short jacks crews I OXXSIA20 I Short jackscrews I DXXS2A20, ., I Short jacks crews I 0XXS3A
See footnote at end of table.
Supersedes page 103.14 of MI L- ST O-1353B.103.14
~
Downloaded from http://www.everyspec.com
I
I
M1LN-&T1{-El3453 B
TABLE 103.111. Standard connectors, MI L- C-2B74B type - Continued.
PA.+=”.+.““l! . . ..-.
I INumber of contacts I Mounting I Part number ~1
I u2874813-1
20 I Fixed jackscrews20
I OXXFIAI Fixed jacks crews I OXXF2A
20 I Fixed jackscrews20
I DXXF3AI Guide pins I OXXGIA
20 I Guide pins20
I OXXG2A~ ~;i~e pins
20I 0XXG3AI OXXOIA
20 I None20 I None
i 0XX02AI 0XX03A
26 I Long jackscrews26
I EXXLIAI Long jackscrews I ZXXL2A
26 I Long jackscrews26
I EXXL3AI Short jacks crews I EXXSIA
26 I Short jacks crews26
I EXXS2AI Short jacks crews I EXXS3A
26 I Fixed jacks crews I EXXFIA26 I Fixed jacks crews26
I EXXF2AI Fixed jacks crews
26I EXXF3A
I Guide pins26
I EXXGIAI Guide pins
26 I Guide pinsI EXXG2A
26 I NoneI EXXG3A
26 I NoneI EXXOIA
26 I NoneI EXX02AI EXX03A
34 I Long jacks crews I FXXLIA34 I Long jacks crews34
I FXXL2AI Long jacks crews I FXXL3A
34 I Short jacks crews I FXXSIA34 I Short jacks crews34
I FXXSZAI Short jacks crews I FXXS3A
34 I Fixed jacks crews I FXXFIA34 I Fixed jacks crews I FXXF2A34 I Fixed jacks crews I FXX’F3A34 I Guide pins34
I FXXGIAI Gutde pins I FXXG2A
34 I Guide pins I FXXG3A34 I None
I NoneI FXXOIA
::I FXX02A
I None I FXX03A42 I Long jackscrews I GXXLIA
42 I Long jackscrews42 I Long jacks crews
I GXXL2A
42I GXXL3A
I Short jacks crews I GXXSIA42 I Short jackscrews4?
I GXXSZAI Short jackscrews I GXXS3A
42 I Fixed jacks crews42
I GXXFIAI Fixed jacks crews
42I GXXF2A
I Fixed jacks crews I GXXF3AI G.fde pins
:;I GXXGIA
I Guide pins42
I GXXG2AI Guide pins
42I GXXG3A
I None42
I GXXOIAI None I GXX02A
42 i None I GXX03A—e. ..— . . . . . . —. . . . . . .,e roox note ac ena or cao le.
Supersedes page 103.15 of t41L-sTo-13S3B.103.15
Downloaded from http://www.everyspec.com
I
MI L- ST D-1353B .:NOTICE 4
TABLE 103.111. Standard connectors, MI L- C-2874B type - Continued
c,. .+.....“,, . . . . .
I IMumber of contacts I Mounting I Part number AI
I 142874813-1
50 I Long Jacks crews I HXXLIA50 I Long jackscrews50
I HXXL2AI Long jacks crews. I HXXL3A
50 I Short jackscrews50
I HXXSIAI Short jackscrews I HXXS2A
50 I Short jackscrews50
I HXXS3AI Fixed jacks crews I HXXFIA
50 I Fixed jacks crews50
I HXXF2AI Fixed jacks crews I HXXF3A
50 I Guide pins I HXXGIA50 I Guide pins50 ~ ;g:ge pins
I HXXG2AI HXXG3A
5050 I None
I HXXOIA
50I HXXOZA
I None I HXX03A66 I Long jacks crews I JXXLIA
I Long jackscrews:;
I JXXL2AI Long jacks crews I JXXL3A
66 I Short jacks crews66
~ j;;:;~I Short jacks crews
66 I Short jacks crews66
I JXXS3AI Fixed jacks crews I JXXFIA
66 I Fixed jacks crews I JXXF2A66 I Fixed jacks crews I JXXF3A
I Guide pins::
I JXXGIAI Guide pins I JXXG2AI Guide pins
:: I NoneI JXXG3A
66 I NoneI JXXOIAI JXX02A
66 1 None75 I Long jacks crews
I JXX03A
75I KXXLIA
I Long jacks crews75
I KXXL2AI Long jacks crews
75I KXXL3A
I Short jackscrews75
I KXXSIAI Short jackscrews I KXXS2A
75 I Short jacks crews i XXXS3A75 I Fixed jacks crews75
I XXXFIAI Fixed jacks crews
75I KXXF2A
I Fixed jacks crews I XXXF3A75 I Guide pins75
I KXXGIAI Guide pins
75I KXXG2A
I Guide pins I KXXG3A75 I None I XXXOIA75 I None75 ~ None
I KXX02A~ KXX03A
See footnote at end. of table.
Supersedes page 103.16 of M[L-sTD.1353B.103.16
Downloaded from http://www.everyspec.com
MIL- STD-1353BNOTICE 4
TABLE 103. III . Standard connectors; MI L-C-28748 tYpe - Continued.
1 1
+Ii
~
I
I
ContactsI I 1
Number of cOnta CtS I Mountfng I Part number ~1I f42874813- 1
I104 I Long jackscrews104
I LXXLIAI Long jacks crews
104I LXXL2A
I Long jackscrews104
I LXXL3AI Short jacks crews
104I LXXSIA
I Short jackscrews104
I LXXS2AI Short jackscrews
104I LXXS3A
I Fixed jacks crews I LXXFIA104 I Fixed jackscrews104
I LXXF2AI Fixed jac’kscrews
104I LXXF3A
I Guide pins104
I LXXGIAI Guide pins I LXXG2A
104 I Guide pins104 I None
I LXXG3A
104I LXXOIA
I None104
I LXX02AI None I LXX03A
~i “Xm indicates shield and shield clamp location or retainingplate and shell type.
Supersedes page 103.17 of MI L- ST O-1353B.103.17
Downloaded from http://www.everyspec.com
MIL- STD-1353BNOTICE 4
TABLE 103.111. Standard connectors, MI L- C-2B748 type.
Contacts
I INumber of contacts I Mounting I Part number ~/
\ M2874814-1
I7 I Long jacks crews7
i AXXLIAI Long jacks crews
7I AXXL2A
I Long jacks crews7
I AXXL3AI Short jackscrews I AXXSIA
7 I Short jackscrews7
I AXXS2AI Short jacks crews
7I AXXS3A
I Fixed jacks crews7
I AXXFIAI Fixed jackscrews I AXXF2A
7 I Fixed jacks crews7
I AXXF3AI Guide pins I AXXGIAI Guide pins
! I Guide pinsI AXXG2A
7I AXXG3A
I None1 None
I AXXOIA
;I AXX02A.
I None I AXX03A9 I Long jacks crews I 8XXL1A9 I Long jacks crews I BXXL2A9 I Long jacks crews I BXXL3A9 I Short jacks crews9
I BXXSIAI Short jackscrews I BxXS2A
9 I Short jackscrews9
I BXXS3AI Ftxed jacks crews I BXXFIA
9 I Fixed jacks crews I BXXF2A9 I Fixed jacks crews9
I BXXF3AI Guide pins I BXXGIA
9 I Guide pins I BXXG2A9 I Guide pins9 I None
I 8XXG3A
9 I NoneI BXXOIA
I None\ :;::;~
1: I Long jackscrews14
I CXXLIAI Long jacks crews
14I CXXL2A
I Long jacks crews14
I CXXL3AI Short jackscrews
14I CXXSIA
I Short jacks crews14
I CXXS2AI Short jacks crews
14I CXXS3A
I F{xed jackscrews14
I CXXFIAI Fixed jacks crews
14I CXXF2A
I Fixed jackscrews14
I CXXF3AI Guide pins I CXXGIA
14 I Guide pins14
I CXXG2AI Guide pins
14 I NoneI CXXG3AI CXXOIA
14 j ;::: I CXX02A14 I CXX03A20 I Long jackscrews I OXXLIA
See footnote at end of table.
Supersedes page 103.18 of MI L-sTo-1353B.103.18
Downloaded from http://www.everyspec.com
MIL- STD-13538NOTICE 4
TABLE 103.11[. Standard connector s,. MI L-C-28748 type - Contjnued.
I
I
I
II
i
i
I
II
I
I
Contacts
I INumber of contacts I Mountfng I Part number ~/
I 142874814-1
I20 I Long jackscrews I OXXL2A
I Long jacks crews%
I OXXL3AI Short jacks crews
20I OXXSIA
I Short jackscrews I OXXS2A20 I Short jacks crews20
~ ::;;;;I Fixed jackscrews
20 I Fixed jacks crews ] El; l;;;20 I Fixed jacks crews20 I Guide pins20
I OXXGIAI Guide pins I OXXG2A
20 \ ~~:~e pins20
I 0XXG3A
20I OXXOIA
I None20 I None
I OXX02AI OXX03A
26 I Long jacks crews26
I EXXLIAI Long jacks crews I EXXL2A
26 I Long jacks crews26
I EXXL3AI Short jacks crews I EXXSIA
26 I Short jacks crews I EXXS2A26 I Short jacks crews I EXXS3A26 I Fixed jacks crews \ ;~;;;~26 I Fixed jacks crews26 I Fixed jacks crews I EXXF3A26 I Guide pins I EXXGIA26 I Guide pins I EXXG2A26 I Guide pins26
I EXXG3AI None I EXXOIA
26 I None26 I None
I EXX02A] ;H:;;
34 I Long jacks crews34 I Long jackscrews34
I FXXL2AI Long jackstrews I FXXL3A
34 I Short jacks crews I FXXSIA34”. I Short jacks crews I FXXS2A34 I Short jacks crews I FXXS3A34 I Fixed jackscrews I FXXFIA34 I Fixed jacks crews34
I FXXF2A] Fixed jacks crews ~ ;:;[:j
34 I Guide pins34 I Guide pins I FXXG2A34 I Guide pins34
I FXXG3AI None
34 I NoneI FXXOIA
34I FXX02A
I None42
I FXX03AI Long jacks crews
42I GXXLIA
I Long jacks crews I GXXL2A42 I Long Jacks Crews I GXXL3A
~
See footnote at end of table.
Supersedes page 103.19 of MI L- ST O-1353B.103.19.
Downloaded from http://www.everyspec.com
MI L- ST D-1353BNOTICE 4
TABLE 103.111. Standard connectors. MIL- C-2 B748 type - Continued.
Contacts
I INumber of contacts I Mounting I Part number ~1
1 M2874814-1
I42 I Short jacks crews I GXXSIA42 I Short jacks crews42 i Short jacks crews
I GXXS2A
42I GXXS3A
I Fixed jacks crews42
I GXXFIAI Fixed jackscrews
42I GXXF2A
I Fixed jacks crews I GXXF3A42 I Guide pins42
I GXXGIAI Guide pins
42I GXXG2A
\ :gui:e pins42
I GXXG3AI GXXOIA
42 ! None42 I None
I GXX02AI GXX03A
50 I Long jacks crews50
I HXXLIAI Long jacks crews I HXXL2A
50 I Long jacks crews I HXXL3A50 I Short jacks crews I HXXSIA50 I Short jacks crews I HXXS2A50 I Short jacks crews I HXXS3A50 I Fixed jacks crewsso
I HXXFIAI Fixed jacks crews
50I HXXF2A
I Fixed jacks crews50
I HXXF3AI Guide pins
50I HXXGIA
I Guide pins I HXXG2A50 I Guide pins50 I None
I HXXG3A
50I HXXOIA
I None I HXX02AI None I HXX03A
:: I Long jacks crews66
I JXXLIAI Long jacks crews
66I JXXL2A
I Long jacks crews66
I JXXL3AI Short jacks crews I JXXSIA
66 I Short jackscrews66 I Short jacks crews
I JXXS2A
66I JXXS3A
I Fixed jacks crews66
I JXXFIAI Fixed jacks crews I JXXF2A
66 I Fixed jacks crews66
I JXXF3AI Guide pins
66I JXXGIA
I Gufde pins66
I JXXG2A1 Guide pins
66 I NoneI JXXG3A1 JXXOIA
66 I None I JXX02A66 I None75
I JXX03AI Long jacks crews
75I KXXLIA
I Long jacks crews75
I KXXL2A1 Long jacks crews
75I KXXL3A
I Short jacks crews I KXXSIA
See footnote at end of table.
Supersedes page 103.20 of MI L- ST O-1353B.103.20
Downloaded from http://www.everyspec.com
MIL- STD-1353B ,-
TABLE 103.111. Standard connectors, 141L-C-28748 type - COntfnued.
Number of contacts
75757575
;;757s157515
104104104104104104104104104104104104104104104
Contacts
Mounting
Short jacks crewsShort jackscrewsFixed jackscrewsFfxed jackscrewsFixed jackscrewsGufde pinsGuide pinsGuide pinsNoneNoneNoneLong jackscrewsLong jackscrewsLong jacks crewsShort jackscrewsShort jackscrewsShort jacks crewsFixed jackscrewsFtxed ~ackscrewsFixed jacks crewsGuide pinsGuide pinsGuide DinsNoneNoneNone
II
Part number ~1 iF42B74B14-
1
KXXS2AXXXS3AKXXFIAXXXF2AKXXF3AKXXGIAKXXG2AKXXG3AKXXOIAKXX02AKXX03ALX XLIALXXL2ALXXL3ALXXSIALXXS2ALXXS3ALXXFIALXXF2ALXXF3ALX XGIALX XG2ALX XG3ALX XOIALXX02ALXX03A
~~1 ‘X” tndicates shield and shield clamp location. or retaining
plate and shell type.
Supersedes page 103.21 of MI L- ST O-1353B.103.21
Downloaded from http://www.everyspec.com
MI L- ST D-1353EINOTICE 4
TABLE 103.111. Standard connectors, MI L- C-2 B74B type.
Contacts
I INumber of contacts I Mounting I Part number ~1
I M28748113-1 I
4 I Long jacks crews4
I AXOLIAI Fixed jacks crews I AXOFIA
4 I Short jackscrews4,
I AXOSIAI Guide pins
7I AXOGIA
I Long jacks crews7
\ :;3;; ;I Fixed jacks crews
7 I Short jacks crews \ W:;:7 I Gufde pins
14 I Long jacks crews14
I CXOLIAI Fixed jacks crews I CXOFIA
14 I Short jacks crews I CXOSIA14 I Guide pins20
I CXOGIAI Long jacks crews
20i OXOLIA
I Fixed jacks crews I OXOFIA20 I Short jacks crews20
I OxOSIAI Guide pins
26I OXOGIA
I Long. jackscrews26
I EXOLIAI Fixed jacks crews I EXOFIA
26 I Short jacks crews I EXOSIA26 I Guide pins I EXOGIA
I Long jackscrews::
I FXOLIAI Fixed jacks crews
34I FXOFIA
I Short jacks crews34
I FXOSIAI Guide pins
44I FXOGIA
I Long jacks crews44
I GXOLIAI Fixed jacks crews I GXOFIA
44 I Short jackscrews44
I GXOSIAI Guide pins
50I GXOGIA
I Long jackscrews50
I HXOLIAI Fixed jackscrews
50I HXOFIA
I Short jacks crews I HXOSIA50 I Guide pins I HXOGIA
I
I
I
~1 “x” indicate shield types.
Supersedes page 103.22 of MI L- ST O-1353B.103.22
Downloaded from http://www.everyspec.com
MI L- ST D-1353BNoTICE 4
TABLE 103.111. Standard connectors, MI L-C-28748 type.
1I
~ Number of contacts
III1
I
44447777
1414141420
::2026262626343434344444444450505050
Contacts
mounting
Long jacks crewsFixed jacks crewsShort jacks crewsGutde pinsLong jackscrewsFixed jackscrewsShort jacks crewsGuide pinsLong jacks crewsFixed jacks crewsShort jacks crewsGuide pinsLong jacks crewsFixed jacks crewsShort .jackscrewsGufde pinsLong jacks crewsFixed jacks crewsShort jacks crewsGuide pinsLong jacks crewsFixed jacks crewsShort jacks crewsGuide pinsLong jacks crewsFixed jacks crewsShort jackscrewsGuide pinsLong jacks crewsFixed jackscrewsShort jacks crewsGuide pins
Al “X” indicate shield types.
Part number ~11428748114 -
CXOSIACXOGIAOXOLIA
EXOGIAFXOLIAFXOFIAFXOSIAFXOGIAGXOLIAGXOFIAGXOSIAGXOGIA
.HXOLIAHXOFIAHXOSIAHXOGIA
Supersedes page 103.23 and 103.24of MI L- ST O-1353B.
103.23/103.24
Downloaded from http://www.everyspec.com
MI L- ST O-13538NOTICE 4
MI L-c-81659 PART NUMEIER SYSTEM
Part number example: WJ1659)29A2-0002
Key: M81659/XX x Xxxx- ~
I II I I
Military specification sheet I
Oash numberi i
iI
Series ) I
C r 4 t e r f a :
Plug, single {nsert, crimp, type 11, class 1, series 2.Receptacle, single insert, crimp, type 11, class 1, series 2.Plug, dual insert, crimp, type 11, class 1, series 2.Receptacle, dual insert, crimp, type 11, class 1, sertes 2.
Shell sizes: A - Accommodate keystone insert.
Series: 2 - Rear release contacts.
Insert arrangements: MS3157.
Contacts: MI L-C-39029/11 or MI L-C-39029/12.MS3172 or MS3173.
Standard connectors: See table 103-V.
M81659f29/31133/35
Supersedes page 103.25 amd 103.26of MI L- ST O-1353B.
103.25/103.26
I
Downloaded from http://www.everyspec.com