Altman Lighting Service & Parts Manual

November 2005

http://www.altmanlighting.com

Copyright © 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005 Altman Lighting Inc.

ALTMAN SERVICE & PARTS MANUAL About this manual This comprehensive manual was designed for dealers and users of Altman Stage Lighting products to assist in identifying parts and assemblies, and for identifying assembly sequences where possible. The line drawings that are in this manual are the same as those that our production staff uses to identify parts during the production and assembly processes.

This manual can be used to: • Identify and order parts for replacement and repair. • Clarify the assembly sequence of parts when making repairs. • Select spare parts for repair departments. • Troubleshoot. • Reference.

New in this release This manual is a complete reprinting of the Altman Stage Lighting, Co. Inc. Service & Parts Manual Release 3.1 printed in September 2001. It includes all updates and revision that have been issued since the first release in 1996 and is intended to replace your entire Service & Parts manual. Altman Stage Lighting no longer prints the Service & Parts Manual for distribution. The Service & Parts manual is only available in Adobe Acrobat *.pdf format available on CD-ROM and on the internet at http://www.altmanltg.com This Service & Parts Manual was created using multiple software packages, and is published in Adobe Acrobat *.PDF format (portable document format). In order to view *.pdf documents, you must have Adobe Acrobat Reader installed on your computer. The Adobe Acrobat Reader program is available free of charge on the Altman Stage Lighting web site, or from the Adobe website http://www.adobe.com

http://www.altmanltg.comhttp://www.adobe.com

Organization of this manual This manual is organized into sections, sub-sections, and pages. Section 1 contains general information and quick reference tables. Sections 2-11 contain product line drawings and associated part numbers. The product families are listed on the left bookmark navigation screen in your adobe acrobat reader. You may toggle between a full view and the navigation pane by using the F5 function key. Sections are further broken down into sub-sections where needed. The numbering format is: Section/Sub-section/Page# Example: 360Q drawings consist of 4 drawings:

3.3.1 Body Assembly 3.3.2 Lens Assemblies 3.3.3 Socket Cap Assembly 3.3.4 Speed Cap Assembly

Section 3 is for ellipsoidals, sub-section 3 is 360Q, and then the page/drawing number. This number method allows for easy addition and removal of pages in future releases.

Quick reference tables The end of section 1 contains quick reference tables for common replacement parts like lenses, sockets, and reflectors. The quick reference tables also include assemblies where available. These tables eliminate the need to search through many line drawings for commonly replaced parts.

Product Information sheets Information sheets are at the beginning of each product section and are there to assist you with common ordering questions particular to that section or sub-section. These sheets contain the latest information from the factory in respect to current manufacturing techniques, obsolete parts, and general information.

Line drawings This manual contains line drawings for the products that we currently manufacture. Wherever possible, drawings have been reduced to fit on a standard 8.5″ x 11″ sheet of paper to make faxing and photocopying easier. Some products will cover many sheets, but will always be broken down into some logical order. Some parts and their numbers are shown for manufacturing purposes only and may only be ordered as a complete assembly. All line drawings in this manual are of current production, and may not exactly match the products in the field.

Prices The prices for replacement parts are separate from this manual and are available from any Altman Stage Lighting dealer, the Altman Stage Lighting web site, or by contacting Altman Stage Lighting directly. All prices are subject to change without notice.

Purchasing spare parts Altman Stage Lighting sells finished products & parts through an authorized dealer network. To locate an authorized dealer, you may visit the Altman Stage Lighting web site, or, call our customer service department at (914)-476-7987, 9:00 am to 5:00 pm, EST Monday-Friday. In addition to purchasing parts from out dealer network, you may also order replacement parts directly from the factory. Parts are sold at the retail published price, and may ordered via fax, mail, or phone. There is an order form at the end of this first section that you may copy and use to order replacement parts. A major credit card is required for these orders, and additional terms are on the order form.

Availability Most parts in this manual are available for prompt delivery. However, we suggest that you expect at least a two week lead time when ordering parts due to our production schedule system, and certain parts that are not standard stocked items may have lead times of up to six weeks.

Warranty on parts Altman Stage Lighting offers a one year warranty on parts that it manufactures. On parts that we do not manufacture such as sockets, glass, ballasts, ignitors, electronics, etc..., we will gladly extend the same warranty that we are given by our vendors.

Interchangeable parts As noted on the inside front cover of this manual, we do not guarantee parts availability or the exact fit of parts due to continuous product improvement. It is common for tooling to wear over its useful life and eventually must be replaced. Some of the parts in this manual will function in other manufacturer’s luminaires. Generally, sockets and lenses are interchangeable.

Disclaimer Altman Stage Lighting will be continually updating this Service & Parts Manual. Therefore, all part numbers, descriptions, and prices are subject to change without notice. It is not advisable at this time to reprint any of the information contained in this publication for promotional materials.

Injection molded parts Altman Stage Lighting has installed an Arburg injection-molding machine to produce molded plastic parts at our facility in Yonkers, NY. With this machine we have been producing many small plastic components such as knobs, shutter blade grips, followspot color changer parts, and more. You may notice slight differences when receiving these new parts. Most notably, we have consolidated several types of 10-32 and ¼-20 knobs into a standard Altman style. We have been slowly incorporating these changes into our production lines and discontinuing the older styles of knobs.

Screws, washers, & nuts standardized Altman has standardized most of the common hardware, such as screws, washers, & nuts. The standard screw that Altman uses will be a Phillips Pan Head with Internal SEMS washer, Zinc Plated (PSP). The Hex Nuts will now be KEPPS style machine screw nuts Zinc Plated. We will eventually eliminating all Flat Washers & Split Lock Washers where possible. There is a chart on page 33 of this section that describes the new part numbering schema. Most line drawings will depict the old style arrangement. Altman may substitute fasteners where appropriate. Most assembly drawings do not illustrate where rivets are used. When ordering parts, rivets are not supplied and must be purchased in bulk or in sets. Most Altman products use standard hardware that can be found at local hardware stores or other sources.

Paint and other finishes When ordering parts, the parts may or may not be painted depending on where in the manufacturing process the painting takes place. In most cases, parts will be painted, but Altman Stage Lighting does not guarantee that parts you receive will be painted or match the finish of the part that is being replaced.

Testing laboratory labels and listings Underwriters Laboratories dictates that UL labels may ONLY be applied in the facility where the item was originally manufactured. For that reason, Altman cannot supply or send UL labels to another location for application. However, if you need a UL label replaced for any reason, the item in question can be sent to our factory for labeling, provided the item still meets all of the current UL standards for labeling. In circumstances where it is not possible or feasible to return the item to our facility, arrangements can be made for a UL Field Inspection. This policy also applies to MET, ETL, and CE labels.

UNDERSTANDING PART NUMBERS Altman part numbering system Altman has implemented a six-digit part number system that replaces the old alpha-numeric part numbering system. In the new numeric system, the first two digits identify the part category, followed by a dash, and the following four digits identify the item in that category. There will always be 2 numbers followed by a dash and then numbers and/or letters. Numbers on line drawings may show an additional 2 digits, which are finish numbers, and should be added to part numbers when ordering. Example: Part Number: XX-XXXX-XX Example: P/N Description 06-0061-10 .250”OD x .35” WALL SMLS 304 BUNDIE TUBE 21’ LENGTH 06-0061-25 #F3 .250” GUIDE ROD 4.125” L 06-0061-30 #F4 .250” GUIDE ROD 5.150” L 06-0061-35 #FP POLE OP FOCUS FITTING TUBE .250” x .178” x 1.75” LENGTH The above items are manufactured from a 21’ length of .250” tube number 06-0061-10. (This -10 number is not in the price list because it is a purchased item by Altman only and is not resold). We use this 21’ length to manufacture a variety of items that all have different lengths and finishes, therefore they require different finish numbers. Other areas where you will find these additional 2 digits are for extruded aluminum items, die-cast items, and sand-cast items. Note for Cast items: When ordering a die-cast or sand-cast part and the part number has a -10 after it (XX-XXXX-10) the part is in its raw form and may not have any holes or paint finish applied. Example: 12-0070-10 #SKYCYC CENTER DIVIDER The above example does not have holes or paint applied because these dividers are held into place with self-drilling screws and then the entire fixture body is painted as one unit. Cast items that have a -21,-22, -25 or higher suffix are generally completed castings that have all of the required holes in place and have been completed to a sub-assembly form.

Pre-packaged sets Numbers starting with 97- are pre-packaged sets. This makes ordering a series of related replacement parts easier when there is no sub-assembly part number.

Item Number

Part Category

Finish Number (if needed)

Sub-assembly part numbers Sub-assemblies that are manufactured and stocked use the category numbers 70 through 79 and are then followed by a 4 digit item number. The drawing below illustrates how sub-assembly part numbers are used.

#65 6” Fresnel Detail Drawing In the above illustration, notice P/N Description 71-0011 #65/65Q Front Lens Holder Assembly There are two different numbers above the 71-0011 sub-assembly part numbers. The number 22-0048 is a spinning and number 20-0129 is a color frame holder. When these two parts are joined together in the manufacturing process, the new part number becomes 71-0011. The general rule is that when one number appears on top of another number, the bottom number is the next assembly that the top number goes into during the manufacturing process.

Ordering assemblies with no part number Assemblies such as lens holders and cap assemblies are sold complete with the hardware needed to use the assembly if they are listed in the reference tables further into this section. For those not listed in the tables, order all the components needed separately as illustrated in the example below. Example: To order a lens assembly for a #65 6″ Fresnel with the lens, spring retaining ring, front assembly and hinge hardware you would need to place the order as follows: Qty. P/N Description 1 34-1005 Spring Ring 1 18-1002 6″ Fresnel lens 1 71-0011 #65/65Q Front Lens Holder Assembly 1 06-0371 #65/65Q Hinge Pin 2 31-HA08 8-32 Acorn Cap Nut Note: When ordering by part numbers as in the above example, Altman Stage Lighting does not guarantee that desired parts will be assembled before shipment.

CARE & MAINTENANCE OF LUMINAIRES About lamps

1. To avoid any possibility of electric shock, disconnect the equipment from the power supply before removing and/or installing the lamp.

2. Articles fabricated from quartz/glass are inherently fragile and there is a remote possibility of a lamp shattering if

subjected to mechanical shock, thermal shock or abrasion. Unless directed to do so, inserting the lamp into the holder by holding the bulb could cause mechanical breakage of the envelope/seal. For you safety, install by holding the lamp base and always use eye protection.

3. Oils/grease or handling of the quartz envelopes may contaminate the surface on operation and reduce performance. If the quartz is handled, clean before operation with a soft, clean, lint-free cloth moistened with methylated spirits (denatured alcohol).

4. Avoid improper operation of the lamp, e.g., operating the lamp at a voltage higher than the lamp is rated for or at improper burn angles. Non-observance may damage the lamp or equipment.

5. In operation, the lamp - a) Develops a high internal pressure and could shatter. b) Develops a high surface temperature. c) May cause UV irritation to skin and eyes on prolonged direct exposure.

Use appropriate screening for people and surrounding. Avoid operation in proximity to combustibles. Allow lamp to cool before attempting replacement.

Lenses During normal use, lenses collect a dirty film and should be cleaned for optimum performance. Cleaning can best be accomplished with soap and hot water or other glass cleaning solution, and a soft, clean, lint-free cloth. Care should be taken so that the cleaning process does not leave a film on the surface of the lens, since the heat from the light beam will bond the film to the surface of the lens. Be careful not to remove the black painted rings on stepped lenses. Be careful not mix the lenses during the cleaning process.

Reflectors The reflectors of luminaires should be cleaned periodically as a dirty film may collect on their surfaces, sacrificing optimum performance. Before cleaning, the lamp should carefully be removed from the luminaire. Extreme caution should be taken to not scratch or deform the reflector in any way. To clean, use a soft, clean, lint-free cloth moistened with methylated spirits (denatured alcohol) and then polish with a dry, soft, clean, lint-free cloth.

Mechanical Mechanical parts such as sliding lens tubes, lock down hardware, and clamps should be maintained using a commercial cleaner such as WD-40. Use commercial fine power graphite for lubricating shutter and iris mechanisms.

Electrical Inspect all wiring and connectors frequently for discoloration, loose connections, and cracking. Replace any questionable wires and/or connectors. Remove the lamp (power off of course) and inspect base and pins of lamp for signs of arcing. Replace sockets if necessary.

LAMP SHAPES & TYPES Incandescent lamps Below are common bulb (envelope) shapes and base types used in theatrical, TV, film, and photographic lighting fixtures. Incandescent lamps are standard tungsten filament in a nitrogen-argon gaseous medium, enclosed in a glass envelope. Lamps of this type are a lower cost initially, but they have short operating life and tend to blacken on the inside of the envelope with usage. Many of the older popular incandescent lamps are now available in Tungsten-Halogen quartz.

Tungsten-Halogen “Quartz” lamps Below are common bulb shapes and base types used in theatrical, TV, film, and photographic lighting fixtures. Formerly referred to as Quartz-Iodine, these lamps have a tungsten filament in a nitrogen-argon gaseous medium to which bromine has been added, enclosed in an envelope generally made from quartz. Lamps of this type are somewhat more expensive initially, but have an operating life span of 2-3 times that of standard incandescent lamps. These lamps do not blacken with age therefore producing uniform light emission throughout their life.

LAMP CODES & ABBREVIATIONS Non-ANSI coded lamps All lamps have a code number, which is descriptive of the particular lamp type, including the size, shape, and wattage. In any lamp code, the first number is the wattage, the letters indicate the shape of the lamp envelope, the next number following the letter is the diameter of the envelope at its widest point and is measured in 1/8 of an inch increments. Any additional numbers or letters will show various characteristics of the lamp, such as base type, spot or flood, clear or frost, etc… example: 300 PAR56 MFL

Lamp Envelope Description Base Description

S Straight Side C Candelabra A Arbitrary-Household MC Mini Candelabra-Skirted T Tubular DCB Double Contact Bayonet Base G Globular MPF Medium Pre-Focus PS Pear Shape MSB Medium Screw Base R Reflector Med 2P Medium 2 pin PAR Parabolic Aluminized Reflector MBP Medium Bi-Post E Ellipsoidal MOSB Mogul Screw base ER Ellipsoidal Reflector MOPF Mogul Pre-Focus MR Mirrored Reflector MOBP Mogul Bi-Post

RSC Recessed Single Contact 2PP 2 pin pre-focus MEP Mogul End Prong EMEP Extended Mogul End Prong RMBP Rim Mount Bi Pin

ANSI coded lamps The ANSI (American National Standards Institute) code consists of a three-letter designation, which applies to all lamps meeting certain specifications. Two lamps with the same ANSI code will meet those same specifications regardless of the manufacturer. The ANSI code is usually in addition to the description. Lamps with the same ANSI code are interchangeable although occasionally different manufacturers represent the lamp as having different burning life, color temperature, and perhaps other characteristics. Generally, ANSI codes are applied to the newer quartz lamps.

Wattage Shape Beam Type

Diameter (1/8”)

LAMP PART NUMBERS Part Number Description Fixture Used In 90-1000IF 1000W 120V, 3100K, 1000hr. 154 90-100A/19 100W "A" Lamp 2905K 750Hr. DF-400, 520 90-100CPAR38/F3 100W PAR38 CDM Lamp, Flood, 3000K R3C 90-100CPAR38/F4 100W PAR38 CDM Lamp, Flood, 4000K R3C 90-100CPAR38/S3 100W PAR38 CDM Lamp, Spot, 3000K R3C 90-100CPAR38/S4 100W PAR38 CDM Lamp, Spot, 4000K R3C 90-100CPAR38/W3 100W PAR38 CDM Lamp, Wide Flood, 3000K R3C 90-100CPAR38/W4 100W PAR38 CDM Lamp, Wide Flood, 3000K R3C 90-100R/FL 100W 100R/FL, 120V, 2700K, 2000hr. Par38, R40 90-100R/SP 100W 100R/SP, 120V, 2775K, 2000hr. Par38, R40 90-1200HMI/GS 1200W 1200HMI/GS, 750hr., Gap Shortened, DE Explorer 90-1200HMI/SE 1200W 1200HMI/SE, 750hr., Single Ended 1200SE 90-120BR40/FL 120-Watt Flood Lamp, 2000hr., 120V, 2900K Par38, R40 90-120BR40/SP 120-Watt Spot Lamp, 2000hr., 120V, 2900K Par38, R40 90-120PARCAP/FL 120W 30 Degree Flood 120V, 2950K, 3000hr. Par38, R40 90-120PARCAP/SP 120W 9 Degree Spot 120V, 2950K, 3000hr. Par38, R40 90-150CDMSA/942 150W CDM T6 SHORT ARC 5000hr 4200K ODC, SPC, S6C, 65C, MWWC,

CDM-TV 90-150CDMT6/830 150W CDM T6 3000K, 12,000hr. ODC, SPC, S6C, 65C, MWWC,

CDM-TV 90-150CDMT6/942 150W CDM T6 4000K, 6,000hr. ODC, SPC, S6C, 65C, MWWC,

CDM-TV 90-150PAR46/MFL 150W 150PAR46/3 MFL, 120V, 2800K, 2000hr. Par46 90-150R/SP 150W 150R/SP Par38, R40 90-200A/23 200W "A" Lamp 2980K 700Hr. DF-558, 528 90-200PAR46/MFL 200W 200PAR46/3 MFL, 120V, 2800K, 2000hr. Par46 90-200PAR46/NSP 200W 200PAR46/3 NSP, 120V, 2800K, 2000hr. Par46 90-200PAR46VWFL 200W 200PAR46/3 VWFL, 120V, 2800K, 2000hr. Par46 90-2500HMI/SE 2500W 2500HMI/SE, 500hr., Single Ended 2500SE 90-250KR38/FL 250W 60 Degree Flood 120V, 2850K, 4000hr. Par38, R40 90-250KR38/SP 250W 35 Degree Spot 120V, 2900K, 6000hr. Par38, R40 90-300IF 300W 120V, 3000K, 1000hr. 154 90-300PAR56/MFL 300W PAR56 MFL, 120V, 2800K, 2000hr. Par56, Par56-B 90-300PAR56/NSP 300W PAR56 NSP, 120V, 2800K, 2000hr. Par56, Par56-B 90-300PAR56/WFL 300W PAR56 WFL, 120V, 2800K, 2000hr. Par56, Par56-B 90-300R/FL 300W R40, 120V, 2775K, 2000hr. Par38, R40 90-300R/SP 300W R40, 120V, 2775K, 2000hr. Par38, R40 90-35CDM/T6/830 39W CDM T6 3000K, 12,000hr. ODC, SPC, S6C, 65C, MWWC,

CDM-TV, MAC 90-4000HMI/SE 4000W 4000HMI/SE, 500hr., Single Ended 4000SE 90-400G/FL 400W 400 G/FL, 120V, 800hr. 153 90-400HTI/24 400W HTI LAMP, 250hr. Voyager 90-500IF 500W 120V, 3050K, 1000hr. 154 90-500PAR56/MFL 500W Q500 PAR56 MFL, 120V, 3000K, 4000hr. Par56, Par56-B 90-500PAR56/NSP 500W Q500 PAR56 NSP, 120V, 3000K, 4000hr. Par56, Par56-B 90-500PAR56/WFL 500W Q500 PAR56 WFL, 120V, 3000K, 4000hr. Par56, Par56-B 90-500PAR64/MFL 500W 500 PAR64 MFL, 120V, 2800K, 2000hr. Par64, Par64-AL, Outdoor Par64,

Par64-B 90-500PAR64/NSP 500W 500 PAR64 NSP, 120V, 2800K, 2000hr. Par64, Par64-AL, Outdoor Par64,

Par64-B 90-500PAR64/WFL 500W 500 PAR64 WFL, 120V, 2800K, 2000hr. Par64, Par64-AL, Outdoor Par64 90-50MR16Q20TL 30900 GE 50MR16/Q/20/TL, Turn & Lock MR16-100-TAL

Part Number Description Fixture Used In 90-50PAR16/NFL 50W 50PAR16/NFL, 120V, 2000 Hr MP 90-50PAR16/NSP 50W 50PAR16/NSP, 120V, 2000 Hr MP 90-50PAR20/NFL 50W 50PAR20/NFL, 120V, 2000hr. MP 90-50PAR20/NSP 50W 50PAR20/NSP, 120V, 2000hr. MP 90-575HMI/GS 575W 575HMI GS, 75hr., Gap Shortened, DE Satellite 90-575HMI/SE 575W 575HMI/SE, 750hr., Single Ended 575SE 90-60A/19 60W "A" Lamp 2790K 1000Hr. DF-400, 520 90-70CDM/T6/830 70W CDM T6 3000K , 12,000hr. ODC, SPC, S6C, 65C, MWWC,

CDM-TV, MAC 90-70CDM/T6/942 70W CDM T6 4000K, 12,000hr. ODC, SPC, S6C, 65C, MWWC,

CDM-TV, MAC 90-70CPAR30/S/3 70W Par 30 CDM Lamp, Spot, 3000K R3C 90-70CPAR30/W/3 70W Par 30 CDM Lamp-Wide Flood, 3000K R3C 90-70CPAR38/F/3 70W Par 38 CDM Lamp, Flood, 3000K R3C 90-70CPAR38/F/4 70W Par 38 CDM Lamp, Flood, 4000K R3C 90-70CPAR38/S/3 70W Par 38 CDM Lamp, Spot, 3000K R3C 90-70CPAR38/S/4 70W Par 38 CDM Lamp, Spot, 4000K R3C 90-70CPAR38/W/3 70W Par 38 CDM Lamp-Wide Flood, 3000K R3C 90-70CPAR38/W/4 70W Par 38 CDM Lamp-Wide Flood, 3000K R3C 90-750IF 750W 120V, 3050K, 1000hr. 154 90-75A/19 75W "A" Lamp 2840K 750Hr. DF-400, 520 90-BAB 20W MR-16 FLOOD ANSI BAB ME, MF, ZS-*, MR16-100 90-BBF 20W 24 DEGREE 12V 2900K, 3000hr. ZS-* 90-BTL 500W Q500 T6/CL/P, 120V, 3050K, 500hr. 65Q, 165Q, 1KAF-MPF 90-BTM 500W Q500 T6/CL/P, 120V, 3200K, 100hr. 65Q, 165Q, 1KAF-MPF 90-BTN 750W Q750 T7/CL/2P, 120V, 3050K, 500hr. 65Q, 165Q, 1KAF-MPF 90-BTP 750W Q750T7/4CL/2P, 120V, 3200K, 200hr. 65Q, 165Q, 1KAF-MPF 90-BTR 1000W Q1000T7/4CL/2P ANSI BTR, 1KAF-MPF 90-BVT 1000W Q1000T7/CL/MP, 120V, 500hr. 75Q, 175Q 90-BVV 1000W Q1000T7/4CL/MP, 120V, 200hr. 75Q, 175Q 90-CXZ 1500W Q1500 T10/4CL ANSI CXZ 2000L, 2000S 90-CYV 1000W 1000Q T7/4CL/BP ANSI CYV 2000L, 2000S 90-CYX 2000W Q2000 T10/4CL ANSI CYX 2000L, 2000S 90-DKZ 1000W Q1000 PS52 120V 3200K, 750hr. 154 90-DNT 750W 120V 3000K 200 Hr. 161 90-DPY 5000W Q5000 T20/4CL ANSI DPY 5000L, 5000S 90-DSE 1000W 120V 3200K 750 Hr. 154 90-DTA 1500W Q1500 T8/4CL ANSI DTA Dyna-Spot 90-DTJ 1500W 1500 T20/39 ANSI DTJ Dyna-Spot 90-DVS 500W 230V 3000K QT3/CL 2000Hr. FC-1, EC-1 90-DWT 1000W Q1000 T6/CL ANSI DWT FC-1, EC-1 90-EDN 500W 120V 3200K 400 Hr. 161 90-EEX 300W 120V 3200K 50 Hr. 1KAF-MPF 90-EGC 500W 120V 3150K 500 Hr. 160 90-EGE 500W Q500 CL/P, 120V, 3000K, 2000hr. 160 90-EGF 750W 120V 3200K 500 Hr. 160 90-EGG 750W Q750CL/P, 120V, 3000K, 2000hr. 160 90-EGJ 1000W Q1000/4CL/P, 120V, 3200K, 500hr. 160 90-EGK 1000W Q1000/4/P, 120V, 3200K, 500hr. 160 90-EGN 500W 120V 3200K 100 Hr. 1KAF-MBP, 1000L, 1000S 90-EGR 750W 120V 3200K 200 Hr., Q750T7/4CL 1KAF-MBP, 1000L, 1000S 90-EGT 1000W Q1000 T7/4CL, 120V, 3200K, 250hr. 1KAF-MBP, 1000L, 1000S 90-EHC 500W 120 Volt 3150K 500 Hr. 3.5Q-MT 90-EHD 500W Q500CL/TP, 2000hr., 3000K 3.5Q-MT 90-EHF 750W Q750/4CL, 3200K, 120V, 500hr.

Part Number Description Fixture Used In 90-EHG 750W Q750/TP, 3000K, 120V, 2000hr. 90-EHM 300W Q300 T3/CL, 120V, 2000hr., 3200K FC-1, EC-1, GC-*, Q-Lite, Soft-Lite

& Soft-Lite-Jr 90-EHP 300W CLEAR, DE, RSC, 120V, 3000K, 2500hr. Q-Lite-Jr 90-EHR 400W 120V DE, CLEAR, 3000K, 2000hr. Q-Lite-Jr 90-EHT 250W Q250CL/MC ANSI EHT 4.5-MC 90-EHZ 300W Q300 T3, 130V, 2000hr., 3000K FC-1, EC-1, GC-*, Q-Lite, Soft-Lite

& Soft-Lite-Jr 90-EMD 750W 120V Frost 3200K 400 Hr. FC-1, EC-1, GC-*, Q-Lite, Soft-Lite

& Soft-Lite-Jr 90-ENX 360W QUARTZ MR16 LAMP, 82V, 75hr. Luminator, Comet 90-ESR 100W Q100CL/DC/2V, 120V, 3000K, 1000hr. 100 90-ESX 20W Q20 MR-16, 2900K, 4000hr. ME, MF, ZS-*, MR16-100 90-EVR Q500 CL/MC 4.5-MC 90-EXN 50W MR-16 FLOOD 40D, 12V, 40°, 5000hr. ME, MF, ZS-*, MR16-100 90-EXT 50W MR-16 NSP, 12V, 14°, 3050K, 5000hr. ME, MF, ZS-*, MR16-100 90-EXZ 50W MR-16, 12V, 3050K, 24°, 5000hr. ME, MF, ZS-*, MR16-100 90-EYC 75W MR-16 FLOOD, 12V, 3050K, 42°, 4000hr. ME, MF, ZS-*, MR16-100 90-EYC-60 75W MR-16 FLOOD, 12V, 3050K, 60°, 4000hr. ME, MF, ZS-*, MR16-100 90-EYC-60-FG 75W MR-16 FLOOD, 12V, 3050K, 60°, 4000hr.,

w/Front Glass ME, MF, ZS-*, MR16-100

90-EYF 75W MR-16 NSP, 12V, 3050K, 14°, 4000hr. ME, MF, ZS-*, MR16-100 90-EYS 42W 20 DEGREE 12V 3050K, 5000hr. ME, MF, ZS-*, MR16-100 90-EZK 150W MR-16 120V ANSI EZK ME, MF, ZS-*, MR16-100 90-EZX 20W MR-16 VNSP, 12V, 2900K, 7°, 4000hr. ME, MF, ZS-*, MR16-100 90-EZZ 70W MR-16 FL, 12V, 3000K, 24°, 3500hr. ME, MF, ZS-*, MR16-100 90-F40BLB 40W F40B/LB FLUORESCENT 701 90-FAD 650W 650 T4/4CL, 100hr., 3200K, Clear Q-Lite-Jr 90-FAY 450W 120V 5000K 750 Hr. SPL-9 90-FBX 650W Q650 T4/4, 3200K, 100hr. Frosted Q-Lite-Jr 90-FCL 500W Q500 T3/CL, 120V, 2000hr., 3200K FC-1, EC-1, GC-*, Q-Lite, Soft-Lite

& Soft-Lite-Jr 90-FCM 1000W Q1000T3/4CL, 3200K, 120V, 400hr. 161, FC-1, EC-1, GC-*, Q-Lite, Soft-

Lite & Soft-Lite-Jr 90-FCZ 500W Frosted, 120V, 2000hr., 3000K FC-1, EC-1, GC-*, Q-Lite, Soft-Lite

& Soft-Lite-Jr 90-FDB 1500W Q1500 T4/4CL, 3200K, 120V, 400hr. FC-1, EC-1, SkyCyc 90-FDF 500W 120V Clear 3200K 400 Hr. FC-1, EC-1, GC-*, Q-Lite, Soft-Lite

& Soft-Lite-Jr 90-FDN 500W Q500T3/4, 120V, 3200K, 400hr. FC-1, EC-1, GC-*, Q-Lite, Soft-Lite

& Soft-Lite-Jr 90-FEL 1000W Q1000/4CL, 120V, 300hr., 3200K 1000Q 90-FEP 1000W Q1M T6/4CL, 230V, 3200K, 300hr., CP77 90-FFN 1000W Q1000 PAR64/1 VNSP, 120V, 3200K,

600hr. Par64, Par64-AL, Outdoor Par64, Par64-B

90-FFP 1000W Q1000 PAR64/2 NSP, 120V, 3200K, 600hr.

Par64, Par64-AL, Outdoor Par64, Par64-B

90-FFR 1000W Q1000 PAR64/5 MFL, 120V, 3200K, 600hr.

Par64, Par64-AL, Outdoor Par64, Par64-B

90-FFS 1000W Q1000 PAR64/6 WFL, 120V, 3200K, Par64, Par64-AL, Outdoor Par64 90-FFT 1000W Q1000T3/1CL, 3200K, 120V, 400hr. FC-1, EC-1, SkyCyc 90-FGT 1500W QT4/4 120V 3200K 400Hr. FC-1, EC-1, SkyCyc 90-FHM 1000W Q1000T3/4, 120V, 3200K, 400hr. 161, FC-1, EC-1, GC-*, Q-Lite, Soft-

Lite & Soft-Lite-Jr 90-FKJ Q1M/T8/4CL/CP40, 230V 1000L, 1000S

Part Number Description Fixture Used In 90-FKK 2000W 230V Clear 3200K 400 Hr. 2000L, 2000S 90-FKW 300W Q300T6 CP81 ANSI FKW 300L, 650L 90-FLE 360W MR-16 LAMP ANSI FLE, 82V, 75hr. Luminator, Comet 90-FLK 575W, 115V, 3200K, 300hr. 360Q, 4.5-MT, S6, SP, OD-600 90-FPA 65W 14 DEGREE 12V 3000K, 3000hr. ZS-* 90-FPB 65W 38 DEGREE 12V 3000K, 3000hr. ZS-* 90-FPC 65W 27 DEGREE 12V 3000K, 3000hr. ZS-* 90-FRK 650W 650T8/4WM CP89 ANSI FRK 650L 90-FRL 650W Q650 T8 ANSI FRL, 220V 650L 90-FSL 300W Q300 T6 ANSI FSL, 200V 300L 90-FXL 410W MR-16 82V ANSI FXL, 38hr. Luminator, Comet 90-GKV 575W 230V ANSI GKV, 3200K, 400hr. 360Q, 4.5-MT, S6, SP, OD-600 90-GLA 575W, 115V, 3050K, 1500hr. 360Q, 4.5-MT, S6, SP, OD-600 90-GLC 575W, 115V, 3200K, 400hr. 360Q, 4.5-MT, S6, SP, OD-600 90-H37KB 250W FOR 702 BLACKLIGHT 702 90-HPA400/30S 380W UV Lamp UV-703, UV-705 90-HX400 375W 115V 3200K, 300hr. 3.5Q, 360Q, 4.5-MT, S6, SP, OD-

600 90-HX401 375W 115V 3050K, 1500hr. 3.5Q, 360Q, 4.5-MT, S6, SP, OD-

600 90-HX600 575W 115V 3200K, 300hr. 360Q, 4.5-MT, S6, SP, OD-600 90-HX601 575W, 115V, 3050K, 1500hr. 360Q, 4.5-MT, S6, SP, OD-600 90-HX754 750W 115V 3200K, 300hr. 360Q, 4.5-MT, S6, SP, OD-600 90-HX755 750W 115V 3050K, 1500hr. 360Q, 4.5-MT, S6, SP, OD-600 90-MHL150 MHL150-G12 250W UV, G12 Base UV-150 90-MHL250 250W UV Uv-250 90-MHL450 400W UV LAMP UV-703, UV-704 & UV-705 90-Q1000P64/MFL 1000W PAR64 120V 3000K 4000 Hr Par64, Par64-AL, Outdoor Par64,

Par64-B 90-Q1000P64/NSP 1000W PAR64 120V 3000K 4000 Hr Par64, Par64-AL, Outdoor Par64,

Par64-B 90-Q1000P64/WFL 1000W PAR64 120V 3000K 4000 Hr Par64, Par64-AL, Outdoor Par64,

Par64-B 90-Q250PAR38/FL 250W 60 Degree Flood 120V, 2900K, 6000hr. Par38, R40 90-Q250PAR38/SP 250W 24 Degree Spot 120V, 2900K, 6000hr. Par38, R40

DISCONTINUED ITEMS The following catalog items are no longer in production. Parts may or may not be available for these units. Please call for parts availability. Cat No: #1 Olivette #101 Baby Spot #105 #165Q-S #65 #165 #75 #175 #175-TV #2100 Super Altspot #2K 261 Scoop #3300, 3400, 3500, 3600 #360 #362 #365, 365/8, 366, 367, 368 #537 #600, 601, 602 #660, 760 #674 #755 #85, 95 #9, 10, 11 #902 Jr. #902 #GB #RLY. RLC #SE, SE-PR #ST #Outdoor Par64-DYS #Orbiter #Par-Plus #Dyna-Spot #1KL Series #Par56/64-EA #UV-704 #JazzStrip #PL-6 #PL-9 #99

ALTMAN PART NUMBER CATEGORIES Prefix Category Description Prefix Category Description

01- Sheet metal/steel* 51- Electrical-connectors/ty-wraps/wire nuts/ wiring accessories* 02- Sheet aluminum/brass* 52- Electrical- plugs/ receptacles* 03- Tin plate 53- Electrical- fans/blowers & accessories* 04- Reflector material 54- Electrical- wire/cable* 05- Bar stock 55- Electrical- strain relief/bushings/sleeving* 06- Tubing/pipe/rod/wire* 56- Electrical- switches/switch parts* 07- Screen/mesh material 57- Electrical- pilot lamps 08- Stainless steel material 58- Electrical- sockets/lampholders 09- Reserve 59- Electrical- motors/relays/timers 10- Extruded aluminum 60- Electrical- circuit breakers-fuse holder 11- Other extruded materials 61- Electrical- electronic components 12- Die-cast aluminum 62- Adhesives/glue 13- Sand cast aluminum 63- Reserve 14- Molded plastics 64- Paint process-colors 15- Misc. plastics/silicones 65- Outside Processes/Plating processes/Anodizing/Plating 16- Molded porcelain 66- Labor 17- Reserve 67- Reserve 18- Lenses/glass 68- Reserve 19- Reflectors 69- Reserve 20- Stamped/formed metal 70- Sub Assemblies-Fresnels/Pars/Scoops/Ellipsoidals 21- Reserve 71- Sub Assemblies-Fresnels/Pars/Scoops/Ellipsoidals 22- Metal spinning 72- Sub Assemblies-TV-Film line 23- Screw machine parts 73- Sub Assemblies -TV-Film line 24- Machined parts 74- Sub Assemblies-Border Lights/Wiring Devices 25- Stamped non-metal materials 75- Sub Assemblies-Border Lights/Wiring Devices 26- RAF Spacers/Standoffs* 76- Sub Assemblies-Follow Spots 27- PEM Inserts/Standoffs* 77- Sub Assemblies-Follow Spots 28- Reserve 78- Sub Assemblies-Follow Spots 29- Reserve 79- Sub Assemblies-Fixture accessories 30- Screws/threaded fasteners* 80- Product cases 31- Nuts* 81- Feature Item Base Item 32- Washers* 82- Feature Item Base Fixture 33- Rivets/rollpins/retaining rings* 83- Reserve 34- Springs/spring rings 84- Reserve 35- Hinges* 85- Obsolete 36- Latches & Fasteners* 86- Reserve 37- Handles/levers/knobs 87- Reserve 38- Small component assemblies 88- Reserve 39- Screw feed assemblies 89- Reserve 40- Factory items 90- Lamps* 41- Chain/hooks/clips/rope 91- Reserve 42- Paints & Finishes-Material 92- Reserve 43- Cardboard/Styrofoam 93- Reserve 44- Reserve 94- Reserve 45- Wood/crating material 95- Non-standard assemblies 46- Shipping supplies 96- Reserve 47- Labels 97- Packaged set/kits 48- Reserve 98- Reserve 49- Drawings/instruction sheets 99- Reserve 50- Ballasts/ignitors/transformers* 100- Reserve

* DENOTES STANDARDIZED NUMBERING FORMAT

LENS & GLASS QUICK REFERENCE Number Description Altman Product 18-1001 3″ Fresnel Lens 100 18-1002 6″ Fresnel Lens 65, 65Q, 165, 165Q 18-1003 6″ Fresnel Lens 1KAF Series 18-1004 8″ Fresnel Lens 75, 75Q, 175, 175Q 18-1005 80mm (3.15″) Fresnel Lens 300L 18-1006 112mm (4.41″) Fresnel Lens 650L 18-1007 130mm (5.12″) Fresnel Lens 1000L, 575SE 18-1008 175mm (6.89″) Fresnel Lens 1000S, 2000L, 1200SE 18-1009 250mm (9.84″) Fresnel Lens 2000S, 5000L, 2500SE 18-1010 300mm (11.81″) Fresnel Lens 5000S, 4000SE 18-2001 2x3.5 White Plate Plano Convex Lens Micro Ellipse (both) 18-2002 3.5x5 Pyrex Plano Convex Lens -5 (both) 18-2003 3.5x6 Pyrex Plano Convex Lens -6 (both) 18-2004 3.5x8 Pyrex Plano Convex Lens -8 (both) 18-2005 3.5x10 Pyrex Plano Convex Lens -10 (both) 18-2006 3.5x12 Pyrex Plano Convex Lens -12 (both ) 18-2012 4.5x6.5 White Plate Plano Convex Lens -4.5x6.5 (both) 18-2008 6x9 Pyrex Plano Convex Lens -6x9 (both) 18-2009 6x12 Pyrex Plano Convex Lens -6x12 (both) 18-2010 6x16 Pyrex Plano Convex Lens -6x16 (both), -6x22 18-2012 4.5x6.5 White Plate Plano Convex Lens 4.5Z-3060Z (front) 18-2013 4.5x9.25 White Plate Plano Convex Lens 4.5Z-1530Z (rear), 4.5Z-2550Z (front) 18-2014 4.5x9B White Plate Bi Convex Lens 4.5Z-2550Z (rear), 4.5Z-3060Z (rear) 18-2015 4.5x12 White Plate Plano Convex Lens 4.5-1530Z (front) 18-2008 6x9 Pyrex Plano Convex Lens S6-3055Z (front) 18-2016 4.5x16 Coated White Plate Plano Convex Lens S6 Fixture Body 18-2017 4.5x6 Coated White Plate Bi Convex Lens S6-50 (front) 18-2018 4.5x8 White Plate Plano Convex Lens S6-40 (rear ), -50 (rear),-1535Z (rear) 18-2019 4.5x11 Coated White Plate Plano Convex Lens S6-40 (front) 18-2020 4.5x12 Coated White Plate Plano Convex Lens S6-30 (both) 18-2021 4.5x16 Coated White Plate Plano Convex Lens S6-20 (both) 18-2022 4.5x5.5 White Plate Plano Convex Lens S6-3055Z (rear) 18-2023 6x14 Coated White Plate Bi Convex Lens S6-1535Z (front) 18-2024 6x26 Coated White Plate Plano Convex Lens S6-12 (both ) 18-2026 10″ Projection Lens (plastic) S6-10 18-2027 12″ Projection Lens (plastic) S6-5 18-2012 4.5x6.5 White Plate Plano Convex Lens 1KL-8-1424Z (rear) 18-2028 4.5x7.4 White Plate Plano Convex Lens 1KL6-40 (rear), 1KL6-50 (both) 18-2015 4.5x12 White Plate Plano Convex Lens 1KL6-2040Z (center) 18-2029 6x7 White Plate Bi Convex Lens 1KL6-2040Z (rear) 18-2030 6x12 White Plate Plano Convex Lens 1KL6-40 (front), 6-30 (both), 6-12 18-2031 6x16 White Plate Plano Convex Lens 1KL6-20 (both), 6-2040Z (front) 18-2032 8x14 White Plate Plano Convex Lens 1KL8-10 (front) 18-2033 8x20 White Plate Plano Convex Lens 1KL8-1424Z (front) 18-2034 10x23 White Plate Plano Convex Lens 1KL10-5 (front) 18-2090 50.65mm x 87.86mm White Plate Plano Convex Master Ellipse 18-2091 67mm x 202.048White Plate Plano Convex Lens Master Ellipse

LENS & GLASS QUICK REFERENCE Number Description Altman Product 18-2013 4.5x9 White Plate Plano Convex Lens 902-JR., 902 (front & center) 18-1011 4.5x2.5x6.5 Conza Lens 902-JR., 902, DYNA-SPOT (rear) 18-2015 4.5x12 White Plate Plano Convex Lens DYNA-SPOT (front) 1000Q (rear) 18-2012 4.5x6.5 White Plate Plano Convex Lens DYNA-SPOT (center) 18-2033 8x20 White Plate Plano Convex Lens 1000Q, COMET (front) 18-2028 4.5x7.4 White Plate Plano Convex Lens COMET (rear) 18-2035 10x20 White Plate Plano Convex Lens SATELLITE-1 (front) 18-2013 4.5x9 White Plate Plano Convex Lens SATELLITE-1 (rear) 18-2036 11x36 White Plate Plano Convex Lens VOYAGER (front) 18-2037 4.5x5.1 White Plate Plano Convex Lens VOYAGER (rear) 18-2031 6x16 White Plate Plano Convex Lens VOYAGER-ST (front) 18-2028 4.5x7.4 White Plate Plano Convex Lens VOYAGER -ST(rear) 18-2038 11x33 White Plate Plano Convex Lens EXPLORER (front) 18-2016 4.5x16 White Plate Plano Convex Lens EXPLORER (center) 18-2039 4.5x12 Pyrex Plano Convex Lens EXPLORER (rear) 18-2031 6x16 White Plate Plano Convex Lens EXPLORER-ST (front) 18-2028 4.5x7.4 White Plate Plano Convex Lens EXPLORER-ST(rear) 18-0041 2″ Diameter x 1/8″ Safety Glass MF ZS-SG 2″x24-7/8″ x 1/8″ Safety Glass (one per 10 lamps) ZS (Optional) 18-0001 12″ Diameter Ultra Violet Lens 702 18-0101 10″ (250mm) Diameter Ultra Violet Fresnel Lens UV-703 (old style) 18-0103 8″ Diameter Ultra Violet Flat Lens UV-704 18-0102 MUG-2 UV pass filter 224mm X 250mm UV-705 18-0104 MUG-2 Flat Glass 10.39” Diameter UV-703 18-0110 8″ Very Narrow Spot Lens OUTDOOR-PAR64, UV-704, SP, ODC 18-0111 8” Narrow Spot Lens UV-704, SP, ODC 18-0112 8” Medium Flood Lens UV-704, SP, ODC 18-0113 8” Wide Flood Lens UV-704, SP, ODC 18-0114 8” Very Wide Flood Lens UV-704, SP, ODC 18-0045 Wall Washer Glass Fresco

LENS ASSEMBLIES QUICK REFERENCE Complete lens Assemblies are available as listed in the table below. Use the part numbers below to order complete lens assemblies with hardware. 3.5Q, 360, & 360Q lens assemblies do NOT include wraparound (barrel) and must be ordered separately. For lens holders without lenses, or those not listed in this table, refer to the line drawing for that fixture. If you are unsure as to what each lens assembly is provided with, refer to the line drawing for that fixture. Number Description Wraparound Micro Series Lens Assemblies 71-0139 Micro Ellipse Lens Holder Assembly Not Applicable 71-0231 Master Ellipse Front Lens Holder Assembly Not Applicable 71-0232 Master Ellipse Rear Lens Holder Assembly Not Applicable 3.5Q Series Lens Assemblies 71-0101 3.5Qx5 Lens Barrel Assembly Complete w/ knob 20-1039 71-0102 3.5Qx6 Lens Barrel Assembly Complete w/ knob 20-1039 71-0103 3.5Qx8 Lens Barrel Assembly Complete w/ knob 20-1039 71-0104 3.5Qx10 Lens Barrel Assembly Complete w/ knob 20-1039 71-0105 3.5Qx12 Lens Barrel Assembly Complete w/ knob 20-1039 360Q Lens Assemblies 71-0110 360/360Q-4.5x6.5 Lens Barrel Assembly Complete w/ knob 70-0025 71-0111 360/360Q-6x9 Lens Barrel Assembly Complete w/ knob 70-0025 71-0112 360/360Q-6x12 Lens Barrel Assembly Complete w/ knob 70-0026 71-0113 360/360Q-6x16 Lens Barrel Assembly Complete w/ knob 70-0027 71-0114 360/360Q-6x22 Lens Barrel Assembly Complete w/ knob 70-0028 Shakespeare Lens Assemblies 71-0501 Shakespeare 50° Lens Barrel Assembly w/ knob Not Applicable 71-0502 Shakespeare 40° Lens Barrel Assembly w/ knob Not Applicable 71-0503 Shakespeare 30° Lens Barrel Assembly w/ knob Not Applicable 71-0504 Shakespeare 20° Lens Barrel Assembly w/ knob Not Applicable 71-0506 Shakespeare 10° Lens Barrel Assembly w/ knob Not Applicable 71-0506 Shakespeare 5° Lens Barrel Assembly w/ knob Not Applicable 71-0160 Shakespeare 1535Z Front Lens Holder Assembly Not Applicable 71-0161 Shakespeare 1535Z Rear Lens Holder Assembly Not Applicable 71-0162 Shakespeare 3055Z Front Lens Holder Assembly Not Applicable 71-0163 Shakespeare 3055Z Rear Lens Holder Assembly Not Applicable 71-0194 Shakespeare 12º Lens Holder Assembly Not Applicable 1KL-Series Lens Assemblies 71-0206 1KL6-12° Lens Holder Assembly Complete w/ knob Not Applicable 71-0204 1KL6-20° Lens Holder Assembly Complete w/ knob Not Applicable 71-0205 1KL6-30° Lens Holder Assembly Complete w/ knob Not Applicable 71-0201 1KL6-40° Lens Holder Assembly Complete w/ knob Not Applicable 71-0200 1KL6-50° Lens Holder Assembly Complete w/ knob Not Applicable 71-0207 1KL6-20-40° Front Lens Assembly Complete w/ knob Not Applicable 71-0208 1KL6-20-40° Center Lens Assembly Not Applicable 71-0209 1KL6-20-40° Rear Lens Assembly Complete w/ knob Not Applicable 71-0210 1KL8-10° Lens Holder Assembly Comp lete w/ knob 70-0086 71-0211 1KL10-5° Lens Holder Assembly Complete w/ knob

REFLECTOR QUICK REFERENCE Number Description Where Used 19-0001 Alzak Aluminum Parabolic Reflector Outdoor-DYS 19-0005 Alzak Aluminum Spherical Reflector 75, 175 19-0006 Faceted Alzak Aluminum Ellipsoidal Reflector 1KL10-5, 8-10, 6-12, 6-20,

6-2040Z, 8-1424Z 19-0007 Alzak Aluminum Spherical Reflector 65/165, 1KAF-MPF & MBP, 65Q/165Q, 65C 19-0009 Matte Alzak Aluminum Ellipsoidal Reflector 154 19-0010 Matte Alzak Aluminum Ellipsoidal Reflector 155 19-0011 Pebbled Alzak Aluminum Ellipsoidal Reflector 1000Q 19-0012 Alzak Aluminum Spherical Reflector 75Q/175Q 19-0013 Faceted Alzak Aluminum Ellipsoidal Reflector 1KL6-30, 6-40, 6-50 19-0015 Matte Alzak Aluminum Ellipsoidal Reflector 160 19-0016 Matte Alzak Aluminum Ellipsoidal Reflector 161 19-0017 Matte Alzak Aluminum Ellipsoidal Reflector 153 19-0020 Alzak Aluminum Spherical Reflector 100 19-0024 Peened Aluminum Radial Reflector Q-Lite-Jr. 19-0025 Peened Aluminum Radial Reflector Q-Lite 19-0026 Specular Aluminum Radial Reflector, Main Lower Soft-Lite-Jr 19-0027 Specular Aluminum Planar Reflector, Side Lower Soft-Jr, Soft-Lite 19-0028 Specular Aluminum Radial Reflector, Main Lower Soft-Lite 19-0029 Specular Aluminum Planar Reflector 701 19-0030 Peened Aluminum Reflector, Main Sky-Cyc 19-0031 Peened Aluminum Planar Reflector, Left Side Sky-Cyc 19-0032 Peened Aluminum Planar Reflector, Right Side Sky-Cyc 19-0033 Alzak Aluminum Spherical Reflector UV-703 19-0034 Alzak Aluminum Spherical Reflector UV-704 19-0036 Matte Alzak Aluminum Parabolic Reflector 520, DF-400 19-0038 Matte Alzak Aluminum Parabolic Reflector 537 19-0039 Alzak Aluminum Spherical Reflector 902, Dyna-Spot 19-0040 Faceted Alzak Aluminum Ellipsoidal Reflector Satellite-1 19-0041 Alzak Aluminum Ellipsoidal Reflector Explorer 19-0042 Faceted Alzak Aluminum Ellipsoidal Reflector Explorer-ST 19-0043 Peened Aluminum Reflector Ground Cyc 19-0044-25 Alzak Aluminum Spherical Reflector 300L 19-0045-25 Alzak Aluminum Spherical Reflector 650L 19-0046-25 Alzak Aluminum Spherical Reflector 575SE, 1000L, CDM-TV 19-0047-25 Alzak Aluminum Spherical Reflector 1200SE, 2000L, 1000S, UV703 19-0048-25 Alzak Aluminum Spherical Reflector 2500SE, 4000SE, 2000S, 5000L, 5000S 19-0050 Faceted Dichroic Ellipsoidal Reflector Shakespeare (New Style) 19-0051 Alzak Aluminum Reflector UV-705 19-0052 Peened Alzak Aluminum Reflector, Main Focusing Cyc, EconoCyc 19-0053 Peened Alzak Aluminum Reflector, Left Side Focusing Cyc, EconoCyc 19-0054 Peened Alzak Aluminum Reflector, Right Side Focusing Cyc, EconoCyc 19-0055-25 Alzak Aluminum Parabolic Reflector Star*Par, SPC, OD-600, ODC, UV-150 19-0057-25 Alzak Aluminum Ellipsoidal Reflector Master Ellipse 19-0060-25 Alzak Aluminum Ellipsoidal Reflector, Secondary 360Q 19-0061-25 Alzak Aluminum Ellipsoidal Reflector, Main 360Q 19-0080 Faceted Alzak Aluminum Ellipsoidal Reflector S6C 19-0080-25 Faceted Alzak Aluminum Ellipsoidal Reflector Explorer-TH 19-0097 Alzak Aluminum Reflector, Main UV-250 19-0098 Alzak Aluminum Reflector, Side UV-250 19-0100 Peened Alzak Aluminum Reflector, Main MMIIrage 19-0101 Peened Alzak Aluminum Reflector, Left Side MMIIrage 19-0102 Peened Alzak Aluminum Reflector, Right Side MMIIrage

SOCKET QUICK REFERENCE Number Description Altman Product 58-0001 Mogul Pre Focus 75, 75Q, 175, 175Q, 902-JR, 902, DYNA-SPOT 58-0002 G-38 Mogul Bi-Post 2000L, 5000L, 2000S, 5000L, 5000S 58-0003 G-38 Mogul Bi-Post Pulse Rated 1200SE, 2500SE, 4000SE 58-0004 Mogul Screw Base 702 58-0005 Mogul Screw w/ 40? Leads 154, 155 58-0006 Mogul End Prong w/ 10? Leads PAR56-B, PAR64-B 58-0007 Mogul End Prong w/ 48? Leads PAR56, PAR64, PAR64-AL 58-0008 Medium Screw Base 153 Scoop 58-0009 Mogul End Prong w/ Screw Terminal OUTDOOR-PAR64, PAR56/64-EA 58-0010 Medium Pre Focus 65, 65Q, 165, 165Q, 1KAF-MPF, 360, 660, 160 58-0011 G22 Medium Bi-Post 1KAF-MBP, 1000L, 1000S 58-0012 G22 Medium Bi-Post Pulse Rated 575SE 58-0013 Medium Screw Sign Receptical DF-400, DF-558, SE, 520, 528, R40 58-0015 Medium Screw w/ Cleats PAR38 58-0016 Medium Side Prong w/ 48? Leads PAR46 58-0017 G9.5Medium 2 (bi) Pin 3.5Q-MT, 360Q, 4.5-MT, 1KL, 1000Q 58-0018 G9.5 Medium 2 (bi) Pin w/ 250° Leads S6-Series, 360QX 58-0019 Mini-Can/Back Flange w/ 40? Leads 3.5Q-MC, 4.5Q-MC 58-0020 Recessed Single Contact w/ Front Flange & 12? Leads SOFT-LITE 58-0021 Recessed Single Contact w/ Front Flange & 42? Leads SOFT-LITE-JR, Q-LITE 58-0022 Recessed Single Contact w/ Back Flange & 12? Leads 600, GROUND-CYC 58-0023 Recessed Single Contact w/ Back Flange & 18? Leads UV-703, UV-704 58-0024 Recessed Single Contact w/ Back Flange & 42? Leads SKY-CYC, Q-LITE-JR 58-0025 Rectangular Recessed Single Contact W/ 48? Leads 161 58-0026 Double Contact Bayonet w/ 40? Leads 100 58-0027 MR-16 Miniature Flat 2 Pin w/ lamp holder & 4? Leads COMET 58-0028 MR-16 Miniature Round 2-Pin w/ Heat Shield & 15? Leads MICRO FIXTURES 58-0029 MR-16 Miniature Round 2 Pin w/ Heat Shield & 15? Leads

Custom pair wired in series. Zip Strip

58-0030 MR-11 Miniature Round 2 Pin w/ 6? Leads MS Series 58-0031 Polarized 2-Pin w/ Lampholder & 9? Leads 300L 58-0032 Polarized 2-Pin w/ Lampholder, Ejector & 9? Leads 650L 58-0033 Double Contact Fluorescent Lamp Holder 701 58-0034 Rear Flange 5KV Pulse Rated UV-703,UV-704,UV-705 58-0035 Stucchi 216/TF MICRO STRIP 58-0036 S26C Socket W/ 40” Blue 14AWG 450C Lead FC-1 58-0037 S26C Socket W/ 56” Brown 14AWG 450C Lead FC-1 58-0050 HTI SE Socket ALTSTAR 58-0053 Orbiter LC1 Socket Marc350 ORBITER 58-0054 G12 CDM Socket MAC, ODC, SPC 58-0055 G12 660 600V 5KV Pulse Socket 58-0056 HTI Reflector Lamp Leads VOYAGER, ST-VOYAGER 58-0059 Medium Screw Base 4KV R3C 58-0059 Medium Screw Base 4KV R3C 58-0076 Medium Base 4KV Pulse Rated MP

SOCKET ASSEMBLY QUICK REFERENCE Complete socket assemblies are available as listed in the table below. Use the part numbers below to order complete socket assemblies with hardware. If you are unsure as to what each socket assembly is provided with, then refer to the line drawing for that fixture.

Number Description Where Used 71-1001 Socket Assembly w/ Mounting Plate, Reflector, Wire Leads, & Sleeving 100 71-1002 Socket Assembly w/ Mounting Plate, Reflector, Wire Leads, & Sleeving 65 71-1003 Socket Assembly w/ Mounting Plate, Reflector, Wire Leads, & Sleeving 65Q 71-1004 Socket Assembly w/ Mounting Plate, Reflector, Wire Leads, & Sleeving 165 71-1005 Socket Assembly w/ Mounting Plate, Reflector, Wire Leads, & Sleeving 165Q 71-1006 Socket Assembly w/ Mounting Plate, Reflector, Wire Leads, & Sleeving 75 71-1007 Socket Assembly w/ Mounting Plate, Reflector, Wire Leads, & Sleeving 75Q 71-1008 Socket Assembly w/ Mounting Plate, Reflector, Wire Leads, & Sleeving 175 71-1009 Socket Assembly w/ Mounting Plate, Reflector, Wire Leads, & Sleeving 175Q 71-1010 Socket Assembly w/ Mounting Plate, Reflector, Wire Leads, & Sleeving 1KAF-MPF 71-1011 Socket Assembly w/ Mounting Plate, Reflector, Wire Leads, & Sleeving 1KAF-MBP 71-1012 Cap Assembly w/ Mounting Plate, Socket, Blinder, Wire Leads, & Sleeving 3.5Q-MC 71-1013 Cap Assembly w/ Mounting Plate, Socket, Blinder, Wire Leads, & Sleeving 360 71-1014 Cap Assembly w/ Mounting Plate, Socket, Blinder, Wire Leads, & Sleeving 3.5Q-MT, 360Q 71-1015 Cap Assembly w/ Mounting Plate, Socket, Blinder, Wire Leads, & Sleeving 360QX 71-1016 Socket Assembly w/ Mounting Plate, Heat shield, Wire Leads, & Sleeving 4.5Z-MT, 1KL 71-1017 71-1016 w/ 4.5Z Lamp Adjustment Plate 4.5Z-MT 71-1018 Socket Assembly w/ Mounting Plate, Wire Leads, & Sleeving 4.5Z-MC 71-1019 71-1018 w/ 4.5Z Lamp Adjustment Plate 4.5Z-MC 71-1021 Cap Assembly w/ Mounting Plate, Socket, Handle, Heat Shield, Wire Leads, & Sleeving S6-Series 71-1022 Socket Assembly w/ Mounting Plate, Heat shield, Wire Leads, Sleeving & Lamp

Adjustment Plate 1KL-Series

71-1051 Cap Assembly w/ Socket, Wire Leads, & Sleeving 153 71-1052 Cap Assembly w/ Socket, Wire Leads, & Sleeving 154 71-1053 Cap Assembly w/ Socket, Wire Leads, & Sleeving 155 71-1054 Socket Assembly w/ Mounting Plate, Wire Leads, & Sleeving 160 71-1055 71-1051 Complete w/ Rear Housing & Spindle Assembly 160 71-1056 Socket Assembly w/ Mounting Bracket, Wire Leads & Sleeving 161 71-1060 Micro Par Socket Assy R3C 71-1061 3.5Q SR Model 450 DEG Socket Assy 3.5Q SR 71-1062 ODP HX-600 Socket Assy Outdoor-600*

PLUG & CONNECTOR PART NUMBERS Old Number New Part Number Description 52-0021 52-1374 1374-1 Snap-in Ground Receptacle 15A 125V Leviton 138GF-Flush 52-138GF-Flush 20A Female 2P&G Stage Pin Connector Flush Panel Mount 138GF 52-138GF 20A Female 2P&G Stage Pin Connector Cable Mount 138GM 52-138GM 20A Male 2P&G Stage Pin Connector Cable Mount 142GF 52-142GF 30A Female 2P&G Stage Pin Connector Cable Mount 142GM 52-142GM 30A Male 2P&G Stage Pin Connector Cable Mount 145GF 52-145GF 60A Female 2P&G Stage Pin Connector Cable Mount 145GM 52-145GM 60A Male 2P&G Stage Pin Connector Cable Mount 229G 52-229G 3-20A Female 2P&G Stage Pin Tap for Cable Mount 229GMT 52-229GMT 3-20A Female 2P&G Stage Pin Tap & 1-20A Male 2P&G 70520FR 52-2310 20A Female Flange Twistlock Connector Flush Mount (Nema L5-20R) 2311P 52-2311 20A Male Twistlock Connector Cable Mount (Nema L5-20P) 52-2311-BLK 20A Black Male Twistlock Connector Cable Mount (Nema L5-20P) 2313C 52-2313 20A Female Twistlock Connector Cable Mount (Nema L5-20R) 52-0015 52-2315 20A Male Twistlock Connector Recessed Mount (Nema L5-20P) 70520MB 52-2315 20A Male Twistlock Connector Recessed Mount (Nema L5-20P) 52-2510A 20A Female Twistlock Connector 4 Pole/5 Wire Panel Mount (Nema L21-20R) 2511P 52-2511 20A Male Twistlock Connector 4 Pole/5 Wire Cable Mount (Nema L21-20P) 2513C 52-2513C 20A Female Twistlock Connector 4 Pole/5 Wire Cable Mount (Nema L21-20R) 51-0133 52-2515 20A Male Flanged Twistlock Connector 4 Pole/5 Wire Cable Mount (Nema L21-20P) 52-2611 30A Male Twistlock Connector Cable Mount (Nema L5-30P) 52-2613 30A Female Twistlock Connector Cable Mount (Nema L5-30R) 52-2623 30A 250V Female Twistlock Connector Cable Mount (Nema L6-30R) 4720P 52-4720C 15A Male Twistlock Connector Cable Mount (Nema L5-15P) 4729C 52-4729C 15A Female Twistlock Connector Cable Mount (Nema L5-15R) 5266P 52-5266C 15A Male Edison Connector Cable Mount (Nema 5-15P) 5269C 52-5269C 15A Female Edison Connector Cable Mount (Nema 5-15R) 1X5-15R 52-5361-BR 15A Brown Female Edison “Simplex” Connector Flush Panel Mount (Nema 5-15R) 1X5-15R 52-5362-W 15A White Female Edison “Simplex” Connector Flush Panel Mount (Nema 5-15R) 2X5-20R 52-5362-BR 20A Brown Female Edison “Duplex” Connector Flush Panel Mount Spec. Grade (Nema 5-20R) 2X5-20R 52-5362-W 20A White Female Edison “Duplex” Connector Flush Panel Mount Spec. Grade (Nema 5-20R) 5366P 52-5366C 20A Male Edison Connector Cable Mount (Nema 5-20P) 5369C 52-5369C 20A Female Edison Connector Cable Mount (Nema 5-20R) 7314 52-7314C 20A “Old Style” Female Twistlock Connector Cable Mount 9965 52-9965C 20A “Old Style” Male Twistlock Connector Cable Mount 52-0003 52-AMP206070-1 3 Pin AMP Cable Clamp 206070-1 52-0006 52-AMP206425-1 #MB-400 3 Contact SQ Receptacle Rev. 206425-1 52-0007 52-AMP206425-2 #UV-703 3 Contact Free Hanging Receptacle 206425-2 52-0004 52-AMP206426-1 #UV-703 3 Contact Rev. Plug 20626-1 52-0002 52-AMP662614 #UV-703 Male Contact 662614 52-0005 52-AMP667402 #UV-703 Female Contact 667402 51-0095 52-CIRFC-1200 #1200SE Fem Cir-01-FR-24-2SW 941 Connector 51-0010 52-CIRFC-2500 #2500SE Fem Cir-01-FR-24-2S 942 Connector 51-0097 52-CIRFC-575 #575SE Fem Cir-01-FR-24-2SZ 941 Connector 51-0007 52-CIRFC-EXP #EXP Female Cir06SFR2015S (932) Connector 51-0006 52-CIRFP-EXP #EXP Ballast Connector VSO 28257 Cir064PPFR-20-15S 51-0094 52-CIRMC-1200 #1200SE Male Cir-065-FR-24-2PW 941 Connector 51-0009 52-CIRMC-2500 #2500SE Male Cir-065-FR-24-2P 942 Connector 51-0096 52-CIRMC-575 #575SE Male Cir-065-FR-24-2PZ 941 Connector 51-0008 52-CIRMC-EXP #EXP Male Cir01FR201SP (932) Connector 51-0140 52-CIRMP-EXP EXP Male Connector Cir020FR-20-15P 51-0140-25 52-CIRMP-EXP-25 Exp Male Connector Cir020FR-20-15P Machined to Fit 52-PS316LMRW 16A Pin & Sleeve 3 Pin Male Line Black (Europe)

PRODUCT LISTINGS STATUS Number UL cUL ETL cETL MET cMET CE Remarks MMIIrage x x MF, MF-220 x x x 100 x x MR16-100 x x 65Q, 165Q x x x 65C x x 1KAF-MPF, 1KAF-MBP x x x 75Q, 175Q x x x ME, ME-220 x x x MAC Series x x 3.5Q-MT, 3.5Q-MC x x 360C, 360Q, 360QX x x 4.5Z-MT, 4.5Z-MC x x x S6 Series x x x S6C Series x x MP x x x Par30 x x Par38, Par46, Par56 x x R3C Series x x SP Series x x x SPC Series x x Par64, Par64-AL x x Outdoor-Par64 x x x Wet Location OD-600 x x x Wet Location ODC x x Wet Location 153, 154, 155, 160, 161 x x 701 x x UV-150 x x Wet Locat ion UV-250 x x UV-703 (120 Volt) x x UV-705 (120 Volt) x x Luminator (120 Volt) x x x Dyna-Spot (120 Volt) x x 1000Q (120 Volt) x x Comet (120 Volt) x x R40 Series x x Par56-B, Par64-B x x EC Series x x FC Series x x x GC Series x x ZS Series x x x MICS Series x x x Sky-Cyc Series x x x Q-Lite, Q-Lite-Jr x x Soft-Lite, Soft -Lite-Jr x x CDM-TV Series x x 300L Series x x x 650L Series x x x 1000L Series x x x 2000L Series x x x 5000L Series x x x 1000S Series x x x 2000S Series x x x 5000S Series x x x 300 Series x x PB Series x x

Number UL cUL ETL cETL MET cMET CE Remarks GJB Series x FF-701 Series x FW-702 Series x 138GF Pin Conn. x 138GM Pin Conn. x

UL= Listed with Underwriters Laboratories, Inc. cUL= Certified by Underwriters Laboratories, Inc. to applicable to Canadian standards. UR= Recognized component by Underwriters Laboratories, Inc. ETL= ETL listed with Intertek Testing Services, Inc. cETL= ETL certified by Intertek Testing Services, Inc. to applicable Canadian standards. MET= Listed with MET Laboratories, Inc. cMET= Certified by MET Laboratories Inc. to applicable Canadian standards. CE= Conforms to applicable European Community directives.

FASTENER PART NUMBER DESCRIPTIONS

SCREWS= 30- HEADSTYLE/SIZE/LENGTH-OPTIONAL Prefix Head Style Size (dia.) Length Finish/Mat.

30= Screws BA=BATTERY SCREW 02=#2 02=1/8 none=Zinc Pltd

BC=BUTTON CAP 03=#3 03=3/16 23=TYPE 23

BHS=BINDING HEAD SLOT 04=#4 04=1/4 25= TYPE 25

CB=CARRIAGE BOLT 06=#6 06=3/8 AB=TYPE AB

FC=FLAT CAP 08=#8 08=1/2 BR=BRASS

FHP=FLAT HEAD PHIL 10=#10 10=5/8 BX=BLACK OX

FHS=FLAT HEAD SLOT 10A=#10-24 12=3/4 BZ=BLACK ZINC

FRP=FILLISTER PHILLIPS 12=#12 14=7/8 DC=DIE CAST

FRS=FILLISTER SLOT 250=1/4-20 16=1" NK=NICKEL

HC=HEX CAP 312=5/16-18 18=1-1/8 NY=NYLON

HH=HEX HEAD 375=3/8-16 20=1-1/4 SS=STAINLESS

HS=HEX SLOTTED 500-1/2" 22=1-3/8 TL=TRI-LOB

HSW=HEX SLOTTED WASH 24=1-1/2 F= TYPE F

HT=HEX TAP 26=1-5/8 TEK=TEK Scr,

HU=HEX UNSLOTTED 28=1-3/4 PBZ-PHOS BRNZ

HW=HEX WASHER 30=1-7/8

KNF=KNURLED HEAD 32=2

PHP=PAN HEAD PHIL 34=2-1/8

PHS=PAN HEAD SLOT 36=2-1/4

PSP=PAN INT SEMS PHIL* 38=2-3/8

PXP=PAN SPLIT SEM PHIL 40=2-1/2 `

RHP=ROUND PHIL 42=2-5/8

RHS=ROUND HEAD SLOT 44=2-3/4

SB=SHOULDER BOLT 46=2-7/8

SBS=SHOULDER SLOT 48=3"

SC=SOCKET CAP 50=3-1/8

SH=SPLIT HEAD MOLD 52=3-1/4

STQ=SQUARE HEAD SET 54=3-3/8

STS=SLOT SET SCREW 56=3-1/2

STX=SOCKET SET SCREW 58=3-5/8

TRS=TRUSS SLOT 60=3-3/4

TSP=THUMB SCREW PLAIN 62=3-7/8

TSS=THUMB SCREW SHOULD 64=4"

W=WELD contin…

XS=WING SCREW

EX: 30-RHS1048 = ROUND HEAD SLOT 10-32 X 3" *Note: Altman Default

FASTENER PART NUMBER DESCRIPTIONS NUTS= 31-TYPE/SIZE

Prefix Type Size

31=Nuts HA=HEX ACORN 02=#2

HE=HEX ELASTIC INSERT 03=#3

HF=HEX FINISH NUT 04=#4

HK=HEX KEPPS* 06=#6

HL=HEX METAL LOCK 08=#8

HM=HEX MACHINE 10=#10

HN=HEX NYLON INSERT 10A=#10-24

HR=HEX REVERSABLE 12=#12

HXPS=IPS NUT 250=1/4-20

SX=PLAS INSERT 312=5/16-18

TN=T-NUT 375=3/8-16

UN=UNISTRUT 500-1/2"

W=WELD

XN=WINGNUT

HC=HEX CROWN

XNP=WINGNUT NYLON INSERT

CN=CAGE NUT

TM=TIMMERMAN NUT

PN=PUSH NUT

HSWB=HEX SERRATED WASHER

WASHERS= 32-TYPE/SIZE Prefix Type Size

32=Washers CW=CUP WASHER 02=#2

ELW=EXTERNAL L/W 03=#3

FD=FENDER WASHER 04=#4

FW=FLAT WASHER* 06=#6

PB=PLUG BUTTON 08=#8

RW=RETAINING WASHER 10=#10

SB=SERRATED BELLEVILLE 10A=#10-24

SLW=SPLIT LOCK WASH. 12=#12

SW=SPRING WASHER 250=1/4-20

SXW-SILICONE WASHER 312=5/16-18

TW=TEFLON WASHER 375=3/8-16

XLW=INTERNAL L/W 500-1/2"

WW=WAVE WASHER (3 or more)

Note: FW washers are SAE standard unless USS in P/N

Note: Non-Standard Washers are 32-TYPE IDXOD

To: Altman Stage Lighting, Co. Inc.

Attention: Roger A. Pujol

From:

Fax: (914) 963-7304 Pages:

Phone: (914) 476-7987 Date:

Re: Parts Manual Release 5.0 CC:

¨ Urgent ¨ For Review ¨ Please Comment ¨ Please Reply ¨ Please Recycle

l Please use this fax form to report any errors or discrepancies that you may discover in this Service & Parts Manual.

FAX

SECTION 2 THEATRE FRESNELS

Catalog Number Description Section 100 #100 3” Theatre Fresnel (inky) 2.1 65/65Q 6” 65/65Q Theatre Fresnels 2.2 165/165Q 6” Screw Feed 165/165Q Theatre Fresnels 2.3 75/175/75Q/175Q 8” Theatre Fresnels 2.4 1KAF-MPF/1KAF-MBP 6” Studio/Theatre Fresnels 2.5 Micro Flood 2” MR-16 Floodlight 2.6

65, 65Q The 65 and 65Q 6” Fresnels are identical except for the socket/reflector assembly used. #65 no longer in production.

65Q Reflector assembly 09/04/02- Parts no longer available- 19-0021, 19-0022, 20-0023, 70-0004, 71-1003. 19-0007 is the new reflector & 70-0003 is the new reflector assembly.

Recall Notice: 65, 65Q The 65, 65Q Fresnels manufactured from March, 1995 through November, 1995, were recalled in December 1995 due to a defective lens door latch mechanism. The spring material that was used was not that full hard brass that Altman specifies for this part, and, as a result, the lamp access door may come open during use. There have been cases where barndoors, color frames, etc, have fallen out of the accessory holder when the door swung open. In order to have the units repaired or replaced, notify the Altman dealer where the units were purchased for details. Field retrofit kits are available, use P/N 95-0125.

165, 165Q The 165 and 165Q 6” Fresnels are identical except for the socket/reflector assembly used. 09/04/02- As of January 2002, Screw feed mechanisms are now manufactured of high-strength plastic. These new screw feed assemblies are not compatible with units manufactured & shipped prior to January 2002.

75, 75Q The 75 and 75Q 8” Fresnels are identical except for the socket/reflector assembly used. The #75 can be upgraded to a 75Q by ordering P/N 70-0186.

175, 175Q The 175 and 175Q 6” Fresnels are identical except for the socket/reflector assembly used. The 175 can be upgraded to a 175Q by ordering P/N 70-0186. 09/04/02- As of January 2002, Screw feed mechanisms are now manufactured of high-strength plastic. These new screw feed assemblies are not compatible with units manufactured & shipped prior to January 2002.

1KAF-MBP, 1KAF-MPF The 1KAF 1000 watt Fresnel has had various changes and redesigns over the years. The line drawings are for the units as they are currently in production. Reflector: The original reflector design for both 1KAF Fresnels consisted of P/N 19-0021 & 19-0022 with a special mount that is no longer in production. All reflectors installed in current production are now P/N 19-0007 and use mounting bracket P/N 20-0236. This revision works with all older model 1KAF series Fresnels. Lens Mount: The original lens design of both 1KAF Fresnels has been upgraded. The original design subjected the lens to cracking under certain operating conditions. The current design has the lens mounted from the outside of the lens door instead of the inside. This revision works with all older model 1KAF series Fresnels.

SECTION 3.1 3.5Q ELLIPSOIDAL SERIES

Catalog Number Description Section 3.5Q-* 3.5Q Body Assembly 3.1.1 3.5Q Socket Assemblies 3.1.2

Reflector Change 09/19/02- The 3.5Q series now uses reflector number19-0008 as the main reflector and 19-0066 as the secondary front reflector.

Speedcap 11/14/03-The socket assembly 71-1061 for 3.5Q-M7-* is obsolete and replaced by socket assembly 71-1014.

Shutter Blade Grip 09/04/02- All 3.5Q shutter blades now utilize a single piece, molded finger grip, part number 14-0090 (4 per unit).

SECTION 3.2 4.5Z SERIES ELLIPSOIDALS

Catalog Number Description Section 4.5Z-* 4.5- Assembly 3.2.1 4.5- Socket Assemblies 3.2.2

Reflector Change 09/19/02- The 4.5 series now uses reflector number19-0002 as the main reflector. Secondary reflector (front) has been discontinued.

Socket assembly 4.5 Series Ellipsoidals use the socket assembly configurations listed below: 71-1016 Medium 2-pin socket assembly without rear adjustment casting. 71-1017 Medium 2-pin socket assembly with rear adjustment casting and hardware. 71-1018 Mini-can socket assembly without rear adjustment casting. 71-1019 Mini-can socket assembly with rear adjustment casting and hardware. Note: P/N 71-1016 is also used on 1KL6- models.

Lens assemblies All 4.5 ellipsoidals use lens-casting P/N 12-0031 and is sold painted black with no glides or other hardware. Order hardware separately in needed. When ordering the entire lens assembly with lens, all hardware is included as depicted in detail drawings.

SECTION 3.3 360 & 360Q SERIES ELLIPSOIDALS

Catalog Number Description Section 360Q-* 360Q Body Assembly 3.3.1 360Q Socket Assemblies 3.3.2

Reflector Change The 360Q Series of Ellipsoidal has undergone a reflector change. The new reflector is the Altman Super Reflector Series, comprising of a 2 piece reflector system. Old style reflectors will not be available as a replacement once inventory has been depleted. Please refer to drawings for update.

Incandescent ellipsoidals The Altman 360 series of ellipsoidals has been discontinued. Use line drawings for the 360Q series to order spare parts. 360 incandescent bell housing, reflector, and yoke are no longer in production. No substitute.

Socket assembly 360Q series ellipsoidals use the same light shield and socket assembly as Altman models 3.5Q-MT series ellipsoidals. The 360Q also uses the speed cap P/N 71-1015 which converts the unit to a 360QX.

Lens assemblies The 360Q series of ellipsoidals all use the same body from the shutter center back to the socket assembly. It is possible to change beam configurations by simply ordering the desired lens assembly and correct barrel. All lenses in the lens assemblies are assembled with the curved sides facing each other.

Housing assembly The housing assembly for 360Q is broken down into sub assemblies and can be purchased as such. Parts not included in assemblies must be ordered individually as illustrated in the line drawing. Sub Assy P/N Sub Assembly Description 95-0149 Entire shutter assembly with iris installed 95-0150 Entire shutter assembly assembled 95-0151 Entire head (bell housing) assembled 95-0152 Yoke with all hardware. Assembled onto P/N 95-0151 if ordered together.

Old style 360Q head & yoke assembly The head assembly was modified for the 360Q in 1990. The old style was a straight yoke that used 2 die cast friction washers between the inside of the yoke and body, and two 5/16” T handles. The friction washers are available as P/N 12-0012 and the T handles are available as P/N 37-0025. The yoke is no longer in production. Old style heads can be upgraded to the new style by ordering P/N 95-0199 upgrade kit. Included in the kit: (1) 95-0152 yoke assembly, (2) 20-0124 locking dogs discs, (6) Mounting rivets

(1) Template, (1) Instruction Sheet.

Shutter Blade Grip 07/09/03- All 360Q shutter blades now utilize a finger grip on each side of blade, part number 32-BF156 (8 per unit).

SECTION 3.4 SHAKESPEARE SERIES ELLIPSOIDALS

Catalog Number Description Section S6-* S6- Fixture Body 3.4.1 S6- Lens Assembly 3.4.2 S6-Zoom 3.4.3 S6-5 & 10 Degree Zoom 3.4.4 S6- Socket Assembly 3.4.5

Reflector Change The Shakespeare series of Ellipsoidal has undergone a reflector change. The new reflector is the Altman Super Reflector Series, comprising of a 2 piece reflector system. Old style reflectors will not be available as a replacement once inventory has been depleted. Please refer to drawings for update.

Product Change As of June of 1996, we no longer use the 8-32 & ¼-20 aluminum inserts (31-0064 & 31-0065) that were pressed into the die cast parts. These inserts were notorious for stripping and falling out, and were unable to be replaced in the field without the proper tools. All casting are now tapped with the proper thread size to eliminate the problem. The instruction manual for the Shakespeare Series 600 incorrectly states in figure 7 that the rubber rings have a color coded dot on them. The color coded dot is actually on the lens and not the rubber ring. The rubber rings should have a hole that is lined up of the dot on the edge of the lens. Shakespeare Products are protected by the following patents and others pending: US Pat Nos. 5,345,371 and D364,001

SECTION 3.5 1KL SERIES ELLIPSOIDALS

Catalog Number Description Section 1KL-* 1KL Head Assembly 3.5.1 1KL6- Lens Assemblies 3.5.2 1KL Socket Assembly 3.5.8 1KL6-12 3.5.3 1KL6-2040Z 3.5.4 1KL8-10 3.5.5 1KL-1424Z 3.5.7 1KL10-5 3.5.6

Obsolete Items The following 1KL Series fixtures have been discontinued as of January 2000; 1KL6-2040Z 1KL8-1424Z 1KL8-10 1KL10-5

Reflectors 19-0013 1KL6-30, 40, and 50 19-0006 All others

Shutters 71-0165 (Black Oxide Finish) 1KL8-10, 1KL8-1424Z, & 1KL10-5 Fixtures 71-0166 1KL6-12, 20, 30, 40, 50, & 1KL-2040Z

Head assembly 70-0095 1KL8-1424Z & 1KL10-5 70-0080 All others

SECTIONS 3.6 MICRO ELLIPSE FIXTURE

Catalog Number Description Section ME-* Micro Ellipse- Housing Assembly 3.6.1 Micro Ellipse- Electrical 3.6.2

Yoke Changes The Micro Ellipse has had a yoke redesign. Please refer to drawing for details.

SECTION 4 PAR FIXTURES

Catalog Number Description Section Par38/R40 Par38/R40 Fixture 4.1 Par46 Par46 Fixture 4.2 Par56 Par56 Fixture 4.3 Par64 Par64 Steel Fixture 4.4 Par64-AL Par64 Aluminum Fixture 4.5 Par56/64-EA Par56/64Enclosed Aluminum 4.6 OUTDOOR-PAR64 Outdoor Par 64 Fixture 4.7 OD-600-* Outdoor HP600 Fixture 4.9 SP-A Star*Par 4.10 MP Micro Par 4.13

PAR36 (RLY/RLC) Discontinued item. Parts, other than standard hardware, are no longer available.

PAR46 & 56 Old style (round) color frames and color frame holders are no longer in production and there is no substitute.

PAR64 Old style (3 piece) color frame holders are no longer in production and there is no substitute.

PAR64-AL Dome does not include hardware 36-0004 and 35-0011 when purchased as 22-0029.

PAR56/64-EA Socket has been changed to P/N 58-0009 and uses 55-1002 sleeving. The PAR64-EA uses a different yoke than the standard PAR64A as noted on drawing.

General Sleeving, ground wire, and strain relief are not included when ordering sockets. Rivets are not shown and are not included when ordering separate components. Sockets exploded to show detail only. Parts not available for sockets.

#660 Beam Projector The #660 Beam Projector is no longer in production. Some parts may be available. Color frame retaining clips and latch/catch assemblies for steel pars normally do not come with rivet holes. If you are replacing these parts and desire the rivet holes, order the same components used on the PAR64-AL. Rivets not included when ordering parts.

SECTION 5 SCOOPS

Catalog Number Description Section 153 10" Scoop Fixture 5.1 154 14" Scoop Fixture 5.2 155 18" Scoop Fixture 5.3 160 14" Focusing Scoop Fixture 5.4 161 16" Quartz Scoop Fixture 5.5

153 Socket assembly 71-1051 is mounted to unit reflector by means of 2 rivets. Rivets not included when ordering socket assembly.

154, 155 The difference between 71-1052 and 71-1053 socket assemblies is that the 71-1052 socket assembly uses two standoffs (P/N 20-0047) and the 71-1053 does not. 58-0005 socket comes with 40” wire leads, no ground wire or sleeving. Order by socket assembly number if those items are needed.

160 Spindle, handle, and brass collar must be ordered separately. 39-0001 Handle 39-0002 1/4” Collar 39-0001 #160 Spindle 58-0010 socket does not include wire leads. 09/04/02- As of January 2002, Screw feed mechanisms are now manufactured of high-strength plastic. These new screw feed assemblies are not compatible with units manufactured & shipped prior to January 2002.

161 58-0080 socket exploded to show detail only, socket parts not available.

2K Scoop #261 No longer in production. Some parts may be available.

General All scoop socket assemblies include sleeving.

SECTION 6.1 LUMINATOR FOLLOWSPOT

Catalog Number Description Section Document Luminator Information Page Section 6.1 Luminator Luminator Follow Spot (Full Drawing) 6.1.1 Luminator Body 6.1.2 Luminator Optic 6.1.3 Luminator Bottom 6.1.4 Luminator Color 6.1.5 Luminator Stand 6.1.6

ARCHITECT’S & ENGINEER’S SPECIFICATIONS

The Luminaire shall be a 410-360 watt follow spotlight, which accepts the FLE, ENX, or FXL quartz projector lamps. The follow spot feature’s a dual control variable focal length optical system. The 18 leaf, high-grade stainless steel Iris shall be top operated with heat resistant control knob, a 3 leaf full range mechanical dowser for uniform even dimming. Guillotine type shall not be acceptable. The Off/On rocker switch shall be illuminated. This unit offers a 6 color internal friction feed color changer. Rating input at 120VAC - shall not exceed 4.0 amps. Housing construction shall be extruded cast aluminum with wrinkle paint finish. Sheet steel construction shall not be acceptable. Lamp and Color boom to be air-cooled with low-noise forced air fan with protective finger guard. Tool-less re-lamping through easily accessible rear hinged access door. Housing dimensions shall not exceed 23 3/8 (L) x 13” (H) x 8” (W). The Luminaire shall be the Altman Luminator; UL & cUL approved for 410W or 360W 82-volt quartz MR 16 Lamp.

INSTRUCTIONS FOR SETTING UP LUMINATOR FOLLOW SPOTLIGHT

Packaged in 2 boxes; one contains follow spot head with yoke attached, second box; standpipe, base and three casters with fasteners.

Assembling the Follow Spotlight

With the fins on base legs facing upward, install casters onto base. Screw pre-assembled threaded standpipe into hole at center of base. Remove ½ inch bolt from telescoping pole and insert through hole in bottom of yoke. Reinsert bolt into pole and tighten. When the head is attached to the pole the color boom shall be on the right. “T” handles on each side of spot tightens head to the yoke. Some prefer handles kept loosened for easier movement, adjust to your preference. Your follow spot is assembled and ready for use.

There are two focus knobs, one on the underside for major focus adjustments; the other located top rear for fine-tuning. When first igniting the lamp you may see smoke. This is normal during burn-in. It will disappear after a few hours usage. If controls appear stiff, they will correct with use. The iris leaves, constructed of stainless steel, must be tempered. Igniting the lamp, closing the iris and letting it burn-in for 2 minutes will accomplish this. Reopen iris fully to allow for cool down. Repeat this procedure until iris stops smoking and leaves have turned a bluish/black color. Do not “burn-in” iris for more than 2 minutes each time, you could cause severe damage to iris leaves. Tempering should be completed after a few burn-ins. Lamping: Your follow spot is supplied with a factory installed lamp. When replacement is necessary, use a cloth towel to install new lamp. Apply slight pressure to slide lamp into position. Be sure to wipe lamp clean of any fingerprints, oil or

dirt. A dirty lamp will blister and burn out prematurely. The lamp to use is the 360W FLE…..Always keep a spare lamp with follow spot. This follow spot draws 4 amps. If an extension cord is needed, the standard household variety is acceptable. If you have any questions, the Altman dealer from whom you purchased this follow spot will assist you. Be sure to ask him for an Altman follow spot brochure to learn about other models available. The parts/diagram list provided is also used for manufacturing purposes. Some illustrations shown are complete assemblies, which cannot be sold as individual parts.

SECTION 6.2 902-JR, 902 FOLLOWSPOT

Catalog Number Description Section Document 902 Information Page Section 6.2 902 902 Follow Spot (Full Drawing) 6.2.1 902 Trough Assy 6.2.2 902 Optics Assy 6.2.3 902/Dyna Hood Assy 6.2.4 77-0113 902/Dyna Color Changer 6.2.5 78-0701 902/Dyna Stand 6.2.6 902Jr. & 902 Follow spots are no longer in production.

SECTION 6.3 DYNA-SPOT FOLLOWSPOT

Catalog Number Description Section Document Dyna-Spot Information Page Section 6.3 Dyna-Spot Dyna-Spot Follow Spot (Full Drawing) 6.3.1 Dyna Trough Assy 6.3.2 Dyna Optics Assy 6.3.3 902/Dyna Hood Assy 6.3.4 77-0113 902/Dyna Color Changer 6.3.5 78-0701 902/Dyna Stand 6.3.6

DYNA-SPOT Follow spot are no longer in production.

SECTION 6.4 1000Q FOLLOWSPOT

Catalog Number Description Section Document 1000Q Information Page Section 6.4 1000Q 1000Q Follow Spot (Full Drawing) 6.4.1 1000Q Trough Assy 6.4.2 1000Q Optics Assy 6.4.3 1000Q Hood Assy 6.4.4 77-0114 1000Q Color Changer 6.4.5 78-0702 1000Q/Comet Stand 6.4.6

ARCHITECT’S & ENGINEER’S SPECIFICATIONS

The luminaire shall be a follow spotlight designed to accept only the 1000W FEL tungsten halogen lamp. The lamp socket assembly shall be mounted to a fixed plate and positioned to insure proper alignment of the lamp in relation to the optical system. The optical system shall consist of the socket assembly, a faceted elliptical Alzak reflector for improved light output, (smooth surfaced reflector shall not be acceptable), an 18 stainless steel leaf iris, adjustable framing shutters, fixed objective lens with adjustable focus lens all mounted in a die cast aluminum and sheet steel housing. Tooless re-lamping and cleaning of lens and reflector shall be accomplished by opening the top mounted hinged access door. The follow spot is supplied with rocker off/on switch, rear operated iris and shutter control, seven lever-6 frame internal color boom plus dowser. Lamp and colorboom to be forced air cooled by blower with safety fan guard. Twenty five-foot power cable with attached Edison plug is provided. Support yoke shall contain a positive locking tilt control handle to mate with the yoke on the locking caster adjustable stand and base unit provided. Power consumption shall be 9.1 amps at 120VAC. The follow spot shall be the Altman 1000Q, U.L. and c.U.L. approved for use with the 1000W FEL lamp.

INSTRUCTIONS FOR SETTING UP 1000Q FOLLOW SPOTLIGHT

Packaged in 2 boxes: one contains follow spot head, second box; the standpipe, base assembly with casters attached and yoke.

Assembling the Follow Spotlight Screw in pre-assembled threaded standpipe into hole at center of base. Attach yoke onto the threaded telescoping pipe. You are now ready to position the follow spot in the yoke. The 1000Q yoke has a spacer welded to the right arm. The handwheel when positioned in the yoke shall be on the same side. Tightening the wheel increases tension on the up and down movement of the spotlight. Some prefer the wheel kept loosened for easier movement, adjust to your preference. Your follow spot is assembled and ready to use.

When first igniting the lamp, you may see smoke. This is normal during burn-in. It will disappear after a few hours usage. If controls appear stiff, they will correct with use. The iris leaves, constructed of stainless steel, must be tempered. Igniting the lamp, closing the iris and letting it burn-in for 2 minutes will accomplish this. Reopen the iris fully to allow for cool down. Repeat this procedure until iris stops smoking and leaves have turned a bluish/black color. Do not ‘burn-in” iris for more than 2 minutes each time, you could cause severe damage to iris leaves. Tempering should be completed after a few burn-ins. Lamping: Use a cloth towel to hold the lamp. Apply slight pressure to install lamp into socket. Be sure to wipe lamp clean of any fingerprints, oil or dirt. A dirty lamp will blister and burn out prematurely. The lamp to use is the 1000W FEL….Always keep a spare lamp with follow spot.

The 1000Q follow spot draws 10 amps. If you use an extension cord, it must be made of minimum 14-Guage wire. If you have any questions, the Altman dealer from whom you purchased this follow spot will assist you. Be sure to ask him for an Altman follow spot brochure to learn of other models available.

The parts/diagram list provided is also used for manufacturing purposes. Some illustrations shown, are complete assemblies, which can not be sold as individual parts.

SECTION 6.5 COMET FOLLOWSPOT

Catalog Number Description Section Document Comet Information Page Section 6.5 Comet Comet Follow Spot (Full Drawing) 6.5.1 Comet Trough Assy 6.5.2 Comet Optics Assy 6.5.3 Comet Hood Assy 6.5.4 77-0114 Comet Color Changer 6.5.5 78-0702 1000Q/Comet Stand 6.5.6 Document Comet Lamphouse Schematic 120/220 V 6.5.7

ARCHITECT’S & ENGINEER’S SPECIFCATIONS

The luminaire shall be a 360 - 410 watt follow spotlight designed to accept the FLE, ENX and FXL quartz projector lamps. The housing shall be constructed of die-cast aluminum and sheet steel. Input rating 120VAC, 4.0 amps maximum. The luminaire shall include adjustable framing shutters, a fully adjustable nichrome 18 stainless leaf iris, 4.5” diameter adjustable rear lens and an 8” diameter adjustable front lens. A three-leaf full range mechanical dowser for uniform dimming is provided. The guillotine type dimmer shall not be acceptable. Tool-less re-lamping shall be accomplished through a rear hinged access door by disconnecting lamp leads and moving lamp ejector lever. The luminaire shall be supplied with two off/on rocker switches for power and lamp, 6 color self-canceling color boom; Friction feed type shall not be acceptable. Lamp/color boom shall be forced air-cooled with a low-noise fan. The mechanical dimmer; framing shutters and iris control shall be top mounted. Rear positioned controls shall not be acceptable. At 100’ the zoom lens with the FLE lamp shall provide a variable diameter of from 2.3 to 16.2 feet and a center intensity of 38 to 16 foot-candles. The luminaire shall be the Altman Comet, U.L. and c.U.L. approved for use up to a 410W lamp.

INSTRUCTIONS FOR SETTING UP COMET FOLLOW SPOTLIGHT

Packaged in 2 boxes: one contains follow spot head, second box: the standpipe, base assembly with casters attached and yoke.

Assembling the Follow Spotlight

Screw pre-assembled threaded standpipe into hole at center of base. Attach yoke onto the threaded telescoping pipe. You are now ready to position the follow spot in the yoke. The Comet yoke has a spacer welded to the right arm. The handwheel when positioned in the yoke shall be on the same side. Tightening the wheel increases tension on up and down movement of the spotlight. Some prefer the wheel loosened for easier movement, adjust to your preference. Your follow spot is assembled and ready for use. When first igniting the lamp, you may see smoke. This is normal during burn-in. It will disappear after a few hours usage. If controls appear stiff, they will correct with use. The iris leaves, constructed of stainless steel, must be tempered. Igniting the lamp, closing the iris and letting it burn-in for 2 minutes will accomplish this. Reopen the iris fully to allow for cool down. Repeat this

procedure until iris stops smoking and leaves have turned a bluish/black color. Do not “burn-in” iris for more than 2 minutes each time, you could cause severe damage to iris leaves. Tempering should be completed after a few burn-ins. Lamping: Your Comet follow spot is supplied with a factory installed lamp. When replacement is necessary, use a cloth towel to install the new lamp. Apply slight pressure to slide lamp into position. Be sure to wipe lamp clean of any fingerprints, oil or dirt. A dirty lamp will blister and burn out prematurely. The lamp to use is the 360W FLE……Always keep a spare lamp with follow spot. The follow spot draws 4 amps. If an extension cord is needed, the standard household variety is acceptable. If you have any questions, the Altman dealer from whom you purchased this follow spot will assist you. Be sure to ask him for an Altman follow spot Brochure to learn of other models available.

The parts/diagram list provided is also used for manufacturing purposes. Some illustrations shown, are complete assemblies, which can not be sold as individual parts.

SECTION 6.6 SATELLITE-1 FOLLOWSPOT

Catalog Number Description Section Document Satellite-1 Information Page Section 6.6 Satellite Operation & Maintenance Manual (6 pages) Satellite Follow Spot (Full Drawing) 6.6.1 Satellite Trough Assy 6.6.2 Satellite Optics Assy 6.6.3 77-0090 Satellite Lamp Assy 6.6.4 Satellite Hood Assy 6.6.5 77-0116 Satellite Color Changer 6.6.6 78-0605 Satellite Yoke Assy 6.6.7 Satellite Stand Assy 6.6.8

ARCHITECT’S & ENGINEER’S SPECIFICATIONS

The luminaire shall be supplied with an off/on switch, rear operated iris, shutter and dimmer controls, an eight lever 6 color self canceling color boom, a multi leaf dimmer, and quiet fan-operated forced air cooling system. The trouping stand shall be provided with three locking casters, leveling jacks, and positive lock pan, tilt and height controls. Ballast shall be remote regulated power supply for 120VAC 6 amps with 3-position switches for line voltage adjustments and supplied with parallel blade U-ground plug for connection to power. Interconnection between power supply and lamp The luminaire shall be a 575W follow spot designed to accept only the 575W HMI HID double-ended lamp. Reflector and lamp shall be in a fixed relationship, and positioned to insure peak performance and proper alignment in the optical train. The optical train shall consist of a reflector-lamp assembly with elliptical Alzak processed aluminum reflector and 575W HMI lamp, adjustable Ni-chrome aperture, pair of adjustable framing shutters, an adjustable 4.5” diameter rear lens, a multi-leaf dimming iris, all mounted in a cast aluminum and sheet steel housing. Relamping shall be accomplished without the use of tools by opening the rear access door of the housing’ disconnecting the lamp leads, loosening the two thumbscrews, and sliding the lamp-reflector assembly out of housing. housing shall be with a removable five-conductor type S cord with GTL connectors. Exterior shall be black wrinkle finish. The light output of this luminaire shall be a maximum of 2.4 million-beam candlepower in spot. At 100 feet the zoom lens system will provide a variable diameter of 12.8 feet to 35.3 feet and center intensity of 240 foot-candles with iris fully open.

SECTION 6.7 ORBITER FOLLOWSPOT

Catalog Number Description Section Document Orbiter Information Page Section 6.7 Document Orbiter Operation & Maintenance Manual (6 pages) Orbiter Retrofit Kit

Orbiter Followspot no longer in production.

SECTION 6.8 VOYAGER FOLLOWSPOT

Catalog Number Description Section Voyager Voyager Follow Spot (Full Drawing) 6.8.1 Voyager Lower Housing 6.8.2 Voyager Lamp & Douser 6.8.3 Voyager Shutter & Iris 6.8.4 Voyager Rear Focus 6.8.5 Voyager Front Lens 6.8.6 Voyager Fine Focus 6.8.7 Voyager Rear Track 6.8.8 Voyager Electrical 6.8.9 Voyager Hood 6.8.10 77-0117 Voyager Color Changer 6.8.11 78-0609 Voyager Yoke 6.8.12 Voyager Stand 6.8.13 Document Voyager Short Throw Follow Spot (Future) Section 6.10

ARCHITECT’S & ENGINEER’S SPECIFICATIONS

The luminaire shall be a 400W follow spot designed to accept only the 400W HTI lamp. The lamp shall be mounted on a factory pre-focused adjustable mounting plate. The fine focus lamp adjustment shall be located at rear of housing. Each unit shall be provided with an adjustable 4 ½” Plano convex objective lens and 11” Plano convex front lens to achieve a variable zoom range of 0.5 to 9.5 degrees. The front lens shall be provided with an adjustable drag control to prevent unwanted lens movement at extreme angles. Relamping to be accomplished through hinged lamp access door, without the use of tools or disturbing the pre-focused lamp alignment. The luminaire shall be supplied with separate fan and lamp switches; 6 lever self-canceling color boom, clam shell douser, and regulated power supply for either 120VAC/10 amps or 240VAC 5amps as specified. The trouping stand shall be provided with four locking casters, leveling jacks and positive lock pan, tilt and height controls. The power lead shall be a removable three-conductor type S cord with GTL connector at lamp house and parallel blade U-ground plug for connection to service. Exterior shall be black wrinkle finish. The light output shall be a maximum of 8.5 million-beam candlepower in spot and 2.5 million-beam candlepower in flood. The luminaire shall be the Altman Voyager

SECTION 6.11 EXPLORER FOLLOWSPOT

Catalog Number Description Section Explorer Explorer Followspot (Full Drawing) 6.11.1 Document Explorer Lower Housing 6.11.2 Explorer Lamp Assembly 6.11.3 Explorer Iris & Shutter 6.11.4 Explorer Rear Focus 6.11.5 Explorer Douser 6.11.6 Explorer Front Lens 6.11.7 Explorer Electrical 6.11.8 Explorer Hood 6.11.9 Explorer Color Changer 6.11.10 Explorer Stand 6.11.11 Explorer Crank Style Stand 6.11.12 Explorer Yoke 6.11.13

ARCHITECT’S & ENGINEER’S SPECIFICATIONS

EXPLORER LONGTHROW WITH CONVERSION KIT The luminaire shall be a 1200-watt HMI follow spotlight designed to accept the 1200W/GS Metal Halide Lamp. Use of a proprietary lamp shall not be acceptable. The lamp shall be factory pre-focused on an adjustable mounting mechanism. Fine focus obtainable via adjusting set screws. Housing construction shall be die cast aluminum. Sheet metal construction shall not be acceptable. Each unit is provided with an adjustable 4½” condensing and 11” objective lens to achieve vari