download product catalog [pdf / 1943kb]

2
9 10 2240mm 2310mm 3910mm 3935mm 3885mm 50° 50° 55° 55° 2570mm UR-W295C 70(8.41) (0.45) 4 3 6 7 2 1 5 5 6 7 8 4 3 2 1 0 (8.8) 0785040302010602050 1100 1350 800 1650 650 1350 650 1300 490 1250 500 1350 530 850 340 550 350 850 420 1000 350 1000 380 850 280 750 300 550 290 520 160 500 190 370 200 420 140 330 160 360 100 270 130 320 80 230 100 200 70 150 40 650 220 600 250 450 250 900 250 430 120 270 60 130 30 2250 1450 2000 2000 WORKING RANGE & NET RATED LOADS (kg) SPECIFICATIONS Crane model UR-W295C UR-W295C1 Lifting capacity Max. 2.93t at 1.4m Working radius Min. 0.45m, Max. 8.41m Hook height (Approx.) Above ground level Max. 8.8m Below ground level Max. 11.7m with 4-part line Boom Length Min. 2.53m to Max. 8.65m Extending speed [with electric power unit] 6.12m / 20.0 sec. [50Hz] 6.12m / 34.0 sec. [60Hz] 6.12m / 28.0 sec. 6.12m / 22.0 sec. [50Hz] 6.12m / 33.0 sec. [60Hz] 6.12m / 28.0 sec. Raising angle / speed [with electric power unit] 0° to 78° / 11.0 sec. [50Hz] 0° to 78° / 18.0 sec. [60Hz] 0° to 78° / 15.0 sec. 0° to 78° / 12.0 sec. [50Hz] 0° to 78° / 18.0 sec. [60Hz] 0° to 78° / 15.0 sec. Structure 5-section box beam type telescoping boom Winch Single line speed [with electric power unit] 40.0 m/min (at 4th layer) [50Hz] 22.0 m/min (at 4th layer) [60Hz] 27.0 m/min (at 4th layer) Hook speed [with electric power unit] 10.0 m/min (at 4th layer with 4-part line) [50Hz] 5.5 m/min (at 4th layer with 4-part line) [60Hz] 6.7 m/min (at 4th layer with 4-part line) Structure Hydraulic motor driven, spur gear reduction, with automatic mechanical brake Wire rope Construction : IWRC 6 x WS(26) GRADE B / Diameter x Length : 8mm x 54.0m / Breaking strength : 42.4kN {4320 kgf} Hook block 2.90t capacity, 2 sheaves with safety latch Slewing Range 360° continuous rotation on a ball bearing race Speed [with electric power unit] 1.5 rpm [50Hz] 1.5 rpm [60Hz] 1.5 rpm Structure Trochoid motor, worm gear reduction, spur gear reduction, and worm self-locking brake (supported by ball bearings) Outriggers 2-section (with damper) for bend and 3-section extension. Double acting hydraulic cylinders with pilot-operated check valves, direct pushing type (Directly connected with hydraulic automatic lock device) Hydraulic Pump Type Variable delivery piston pump Rated pressure 21.6 MPa {220 kgf/cm 2 } Rated delivery 38 liters/min 30 liters/min Rated revolution 2000 rpm 2600 rpm Hydraulic oil tank capacity 27 liters Safety devices Pressure relief valve for hydraulic circuit / Counterbalance valves for boom raising and boom telescoping cylinders / Pilot-operated check valves for outrigger cylinders / Boom angle indicator with load indicator / Hook safety latch / Automatic mechanical brake for winch / Automatic stop for overwinding / Overwinding alarm / Automatic stop for leaving minimum wire rope / Emergency stop button (Ignition cut) / Inter-lock device of crane and crawling levers / Inter-lock device of crane and outriggers / Level / Turn over prevention device / Load meter OUTRIGGER POSITIONS DIMENSIONS CRAWLING GEAR Crane model UR-W295C UR-W295C1 Crawling speed [with electric power unit] 0~2.3 km/h, forward / reverse [50Hz] 0~1.2 km/h [60Hz] 0~1.4 km/h 0~2.0 km/h, forward / reverse [50Hz] 0~1.2 km/h [60Hz] 0~1.4 km/h Hill climbing ability 20˚ 20˚ Tread length 1050mm 1050mm Ground contact pressure [with electric power unit] 48.0 kPa {0.49 kgf/cm 2 } 51.4 kPa {0.52 kgf/cm 2 } 49.8 kPa {0.51 kgf/cm 2 } 52.9 kPa {0.54 kgf/cm 2 } Engine manufacturer / model Mitsubishi / GB400LE Kubota / Z482-E3B Displacement 391cc 479cc Maximum output 6.6kW(9.0PS) / 1800 rpm, Rated output 7.4kW(10.0PS) / 2600 rpm, Rated output Fuel Petrol Diesel Fuel tank capacity 6 liters 10 liters Steering Hydraulic drive independent of left / right Hydraulic drive independent of left / right Starter Starter motor (Recoil starter) Starter motor Crane model UR-W295C UR-W295C1 Total width 600mm Total height 1375mm [1430mm] Total length 2690mm 2730mm Mass of crane 1850kg [1980kg] 1920kg [2040kg] [with electric power unit] Searcher hook assembly (Options) Max 8.8m Hook height (Approx.) (Above ground level) Max 8.41m Working radius 1850kg Mass of crane UR-W295C is narrow enough to allow access through standard size single doorway, but with 2.93t of lifting power. UNIC original stability sensor system provides the benefit of turnover protection for safety. Its outriggers allow for independent multi-angle configurations to place at the best position in restricted or confined area. Easy and quickly installed searcher hook and fly jib options will increase working radius and lifting height further more. Max 2.93t × 1.4m Lifting capacity Length 500mm Lifting capacity Max. 300kg Tilt angles 0°, 20°, 40°, 60° Stowed position In Operation Radio remote control with electric power unit Electric power unit specifications Rated power 3.7kW (3-phase 4 poles) Voltage AC 200V or 400V (50Hz / 60Hz) 3 phase 4P *Not included any cables. Load meter Fly jib assembly (Options) Length 1.5m Lifting capacity Max. 700kg Tilt angles 0°, 20°, 40°, 60° 20° 20° 20° Outrigger Max-extended Outrigger NOT max-extended Outrigger Max-extended NOT max-extended Hook Height from Ground (m) Working Radius (m) Hook Heignt below Ground level 11.7m

Transcript of download product catalog [pdf / 1943kb]

Page 1: download product catalog [pdf / 1943kb]

9 1022

40m

m

2310

mm

3910

mm

3935

mm

3885mm

50°

50°

55°

55°

2570mm

UR-W295C

70゚

(8.41)(0.45) 43 6 721 5

5

6

7

8

4

3

2

1

0

(8.8)

0゚

78゚

50゚

40゚

30゚

20゚

10゚

60゚

2050 1100

● 1350 800

● 1650 650

● 1350 650

● 1300 490

● 1250 500● 1350 5

30

● 850 340

● 550 350

● 850 420

● 1000 350

● 1000 380

● 850 280

● 750 300

● 550 290

● 520 160

● 500 190

● 370 200

● 420 140

● 330 160

● 360 100

● 270 130

● 320 80

● 230 100

● 200 70

● 150 40● 650 22

0

● 600 250

● 450 250

● 900 250

● 430 120

● 270 60 ● 130 30

2250 1450

20002000

WORKING RANGE & NET RATED LOADS (kg)

SPECIFICATIONS

Crane model UR-W295C UR-W295C1Lifting capacity Max. 2.93t at 1.4m

Working radius Min. 0.45m, Max. 8.41m

Hook height (Approx.)Above ground level Max. 8.8m

Below ground level Max. 11.7m with 4-part line

Boom

Length Min. 2.53m to Max. 8.65m

Extending speed[with electric power unit]

6.12m / 20.0 sec.[50Hz] 6.12m / 34.0 sec. [60Hz] 6.12m / 28.0 sec.

6.12m / 22.0 sec.[50Hz] 6.12m / 33.0 sec. [60Hz] 6.12m / 28.0 sec.

Raising angle / speed[with electric power unit]

0° to 78° / 11.0 sec.[50Hz] 0° to 78° / 18.0 sec. [60Hz] 0° to 78° / 15.0 sec.

0° to 78° / 12.0 sec.[50Hz] 0° to 78° / 18.0 sec. [60Hz] 0° to 78° / 15.0 sec.

Structure 5-section box beam type telescoping boom

Winch

Single line speed[with electric power unit]

40.0 m/min (at 4th layer)[50Hz] 22.0 m/min (at 4th layer) [60Hz] 27.0 m/min (at 4th layer)

Hook speed[with electric power unit]

10.0 m/min (at 4th layer with 4-part line)[50Hz] 5.5 m/min (at 4th layer with 4-part line) [60Hz] 6.7 m/min (at 4th layer with 4-part line)

Structure Hydraulic motor driven, spur gear reduction, with automatic mechanical brake

Wire rope Construction : IWRC 6 x WS(26) GRADE B / Diameter x Length : 8mm x 54.0m / Breaking strength : 42.4kN {4320 kgf}

Hook block 2.90t capacity, 2 sheaves with safety latch

SlewingRange 360° continuous rotation on a ball bearing race

Speed [with electric power unit] 1.5 rpm [50Hz] 1.5 rpm [60Hz] 1.5 rpm

Structure Trochoid motor, worm gear reduction, spur gear reduction, and worm self-locking brake (supported by ball bearings)

Outriggers 2-section (with damper) for bend and 3-section extension. Double acting hydraulic cylinders with pilot-operated check valves, direct pushing type(Directly connected with hydraulic automatic lock device)

Hydraulic Pump

Type Variable delivery piston pump

Rated pressure 21.6 MPa {220 kgf/cm2}

Rated delivery 38 liters/min 30 liters/min

Rated revolution 2000 rpm 2600 rpm

Hydraulic oil tank capacity 27 liters

Safety devicesPressure relief valve for hydraulic circuit / Counterbalance valves for boom raising and boom telescoping cylinders / Pilot-operated check valves for outrigger cylinders / Boom angle

indicator with load indicator / Hook safety latch / Automatic mechanical brake for winch / Automatic stop for overwinding / Overwinding alarm / Automatic stop for leaving minimum wire rope / Emergency stop button (Ignition cut) / Inter-lock device of crane and crawling levers / Inter-lock device of crane and outriggers / Level / Turn over prevention device / Load meter

OUTRIGGER POSITIONS

DIMENSIONS

CRAWLING GEAR

Crane model UR-W295C UR-W295C1Crawling speed[with electric power unit]

0~2.3 km/h, forward / reverse[50Hz] 0~1.2 km/h [60Hz] 0~1.4 km/h

0~2.0 km/h, forward / reverse[50Hz] 0~1.2 km/h [60Hz] 0~1.4 km/h

Hill climbing ability 20˚ 20˚

Tread length 1050mm 1050mm

Ground contact pressure[with electric power unit]

48.0 kPa {0.49 kgf/cm2}51.4 kPa {0.52 kgf/cm2}

49.8 kPa {0.51 kgf/cm2}52.9 kPa {0.54 kgf/cm2}

Engine manufacturer / model Mitsubishi / GB400LE Kubota / Z482-E3B

Displacement 391cc 479cc

Maximum output 6.6kW(9.0PS) / 1800 rpm, Rated output 7.4kW(10.0PS) / 2600 rpm, Rated output

Fuel Petrol Diesel

Fuel tank capacity 6 liters 10 liters

Steering Hydraulic drive independent of left / right Hydraulic drive independent of left / rightStarter Starter motor (Recoil starter) Starter motor

❶ ❸

Crane model UR-W295C UR-W295C1❶ Total width 600mm

❷ Total height 1375mm [1430mm]

❸ Total length 2690mm 2730mmMass of crane 1850kg [1980kg] 1920kg [2040kg]

[with electric power unit]

Searcher hook assembly (Options)

Max

8.8mHook height (Approx.)

(Above ground level)

Max

8.41m Working radius

1850kgMass of crane

UR-W295C is narrow enough to allow access through standard size single doorway, but with 2.93t of lifting power.

UNIC original stability sensor system provides the

benefi t of turnover protection for safety. Its outriggers

allow for independent multi-angle confi gurations to

place at the best position in restricted or confi ned

area. Easy and quickly installed searcher hook

and fl y jib options will increase working radius

and lifting height further more.

Max

2.93t×1.4mLifting capacity

Length 500mm

Lifting capacity Max. 300kg

Tilt angles 0°, 20°, 40°, 60°

Stowed position

In Operation

Radioremotecontrol

with electric power unit

Electric power unit specifi cationsRated power 3.7kW (3-phase 4 poles)Voltage AC 200V or 400V (50Hz / 60Hz) 3 phase 4P

*Not included any cables.

Load meter

Fly jib assembly (Options)

Length 1.5m

Lifting capacity Max. 700kg

Tilt angles 0°, 20°, 40°, 60°

20°

20°

20°

Outrigger Max-extended

Outrigger NOT max-extended

Outrigger ● Max-extended NOT max-extended

Hook

Hei

ght f

rom

Gro

und

(m)

Working Radius (m)

Hook

Hei

gnt b

elow

Gro

und

leve

l 11

.7m

Page 2: download product catalog [pdf / 1943kb]

21 22

10 Emergency stop button

A B

14 Boom outrigger monitor lamp

Standard equipments and Options

STANDARD EQUIPMENTS / OPTION [★Standard ●Option ― Not available]

Crane model UR-W094C UR-W295C UR-W295C1 UR-W376C2 UR-W546C2 UR-W547C2 UR-W706C2 UR-W1006C2 Crane modelUR-W094CP2E UR-W295CP2A UR-W295CP2AM UR-W295C1A UR-W295C1AM UR-W376C2A UR-W376C2AM UR-W546C2A UR-W546C2AM UR-W547C2A UR-W547C2AM UR-W706C2A UR-W706C2AM UR-W1006C2A UR-W1006C2AM

Engine manufacturer / model Mitsubishi / GB300LE Mitsubishi / GB400LE Mitsubishi / GB400LE Kubota / Z482-E3B Kubota / Z482-E3B Yanmar / 3TNV76 Yanmar / 3TNV76 Yanmar / 3TNV76 Yanmar / 3TNV76 Yanmar / 3TNV76 Yanmar / 3TNV76 Mitsubishi / S4L2 Mitsubishi / S4L2 Yanmar / 4TNV88 Yanmar / 4TNV88 Engine manufacturer / model

Fuel Petrol Petrol Petrol Diesel Diesel Diesel Diesel Diesel Diesel Diesel Diesel Diesel Diesel Diesel Diesel FuelElectric motor ̶ ̶ AC 200V or 400V ̶ AC 200V or 400V ̶ AC 200V or 400V ̶ AC 200V or 400V ̶ AC 200V or 400V ̶ AC 200V or 400V ̶ AC 400/400-440V Electric motor

1 Radio remote control ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ Radio remote control 12 Cable remote control ● ● ● ● ● ● ● ● ● ● ● ● ● ̶ ̶ Cable remote control 23 Load meter ★ ★ ★ ★ ★ ̶ ̶ ̶ ̶ ̶ ̶ ̶ ̶ ̶ ̶ Load meter 34 Digital load meter ̶ ● ● ● ● ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ Digital load meter 45 Automatic stop for overloading (KM-100) ̶ ● ● ● ● ★ ★ ★ ★ ★ ★ ̶ ̶ ̶ ̶ Automatic stop for overloading (KM-100) 56 Automatic stop for overloading (ML-300) ̶ ̶ ̶ ̶ ̶ ̶ ̶ ̶ ̶ ̶ ̶ ★ ★ ̶ ̶ Automatic stop for overloading (ML-300) 67 Safe load indicator ̶ ̶ ̶ ̶ ̶ ̶ ̶ ̶ ̶ ̶ ̶ ̶ ̶ ★ ★ Safe load indicator 78 Automatic stop for overwinding ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ Automatic stop for overwinding 8

9 Automatic stop for leaving minimum wire rope ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ Automatic stop for leaving minimum

wire rope 9

10 Emergency stop button ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ Emergency stop button 1011 Level ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ Level 1112 Turn over prevention device ̶ ★ ★ ★ ★ ● ● ̶ ̶ ̶ ̶ ̶ ̶ ̶ ̶ Turn over prevention device 1213 Three colored lamp ̶ ● ● ● ● ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ Three colored lamp 1314 Boom outrigger monitor lamp ̶ ̶ ̶ ̶ ̶ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ Boom outrigger monitor lamp 1415 Searcher hook assembly ̶ ● ● ● ● ● ● ● ● ● ● ̶ ̶ ̶ ̶ Searcher hook assembly 1516 Fly jib assembly ̶ ● ● ● ● ● ● ● ● ̶ ̶ ● ● ★ ★ Fly jib assembly 1617 Single line hook ̶ ● ● ● ● ̶ ̶ ̶ ̶ ̶ ̶ ̶ ̶ ̶ ̶ Single line hook 1718 Working light ● ● ● ● ● ● ● ● ● ● ● ● ● ̶ ̶ Working light 1819 Headlight ̶ ̶ ̶ ̶ ̶ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ Headlight 1920 Outrigger mats ● ● ● ● ● ● ● ● ● ● ● ● ● ̶ ̶ Outrigger mats 2021 Black crawler belt ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ̶ ̶ Black crawler belt 2122 White crawler belt ● ● ● ● ● ● ● ̶ ̶ ̶ ̶ ̶ ̶ ̶ ̶ White crawler belt 2223 White crawler belt (as spare) ● ● ● ● ● ● ● ̶ ̶ ̶ ̶ ̶ ̶ ̶ ̶ White crawler belt (as spare) 2324 Rubber Pad ̶ ̶ ̶ ̶ ̶ ̶ ̶ ̶ ̶ ̶ ̶ ̶ ̶ ★ ★ Rubber Pad 2425 20M cable for motor (200V) ̶ ̶ ● ̶ ● ̶ ● ̶ ● ̶ ● ̶ ● ̶ ̶ 20M cable for motor (200V) 2526 20M cable for motor (400V) ̶ ̶ ● ̶ ● ̶ ● ̶ ● ̶ ● ̶ ● ̶ ̶ 20M cable for motor (400V) 26

6 Automatic stop for overloading

13 Three colored lamp

8 Automatic stop for overwinding

Weight forAutomatic stop for overwinding

25 20M cable for motor (200V)22 White crawler belt

2 Cable remote control 3 Load meter

17 Single line hook

11 Level

19 Headlight 20 Outrigger mats18 Working light

12 Turn over prevention device9 Automatic stop forleaving minimum wire rope

5 Automatic stop for overloading1 Radio remote control 4 Digital load meter

16 Fly jib assembly15 Searcher hook assembly

24 Rubber Pad21 Black crawler belt

7 Safe load indicator

21 22

A B

A W094C, W295CB W376C, W546C, W547C, W706C, W1006C

A W295CB W376C, W546C, W547C, W706C, W1006C

KM-100 W376C, W546C, W547C ML-300 W706C

A

A W094C, W295C B W376C, W546C, W547C, W706CC W1006C

Load indication is each 20kg (0.02t).

NOTE:Not available in combination with Fly jib assembly. For more information, contact your local UNIC distributor.

NOTE:Not available in combination with Fly jib assembly or Searcher hook assembly. For more information, contact your local UNIC distributor.

23 White crawler belt (as spare) 26 20M cable for motor (400V)

B

C

This transmitter is subject to alternation in some countries. For more information, contact your local UNIC distributor.

......STOP !STOP !