LabVIEW 2014: Purchase, Download, and Install Instructions ...
Download and install add-in
description
Transcript of Download and install add-in
Download and install add-in
• Download and install office windows components from the following link
• Click Here
Change Security Settings
• Reopen Internet Explorer
• Go to tools – internet options
• Under security tab• Trusted sites (green
check mark) and then underneath that click on sites
Change Security Settings
• In the top part type in:• http://www.rpi.edu• Uncheck the button at
bottom that states “require server verification (https:) for all sites in this zone
• Click add• close
Change Security Settings
• Click on the Custom Custom Level Button
Change Security Settings
• Approximately Halfway down under Miscellaneous
• Change access sources across domains to ENABLE
• Then click ok
Change Security Settings
• After clicking OK in the custom security settings
• Click OK• Reopen the browser
The Website
• Proceed to the Tutorial presentation for an overview of the website.