TECHNOLOGIESmythomytho

H Seriessolenoid dosingpumps

2TECHNOLOGIESmythomytho

CleverJust 5 Models, Just PVDF, All functions in one

pump

44 models that cover 1 to 60 l/h with an output

pressure up to 20 Bar

41 Casing allows skids to be pre-constructed, as

the fixing points remain constant, and the

pumps can be selected on confirmation of the

dosing flow

4Inventory Reduction

4Reduce spares stock holding

CompatiblePVDF pump head and ceramic ball valve as

standard

4PVDF is suitable for almost all chemical used in

the Industrial, Waste Water Treatment and

potableWater applications

4The use of Ceramic balls as standard improves

the pumping reliability and the chemical

compatibility of the whole liquid end

4Full chemical compatibility

Analogue Version

Digital Version

3TECHNOLOGIESmythomytho

ReliableLong life diaphragm tested to give 5 years working life

4The advanced design and manufacturing process allows the diaphragm to have

a unique life expectancy

4Made of pure solid PTFE, the diaphragm is compatible with most chemicals

4The diaphragm has been tested over a period of 5 years giving superior results

4Routine diaphragm replacement is no longer a requirement

4Reduced maintenance

4Full chemical compatibility

Steady Dosing PerformanceStabilized Multi Power Supply 100÷240 Vac 50/60 Hz with reduced consumption

4Reduced power consumption as the solenoid only draws the required power to

activate the pump, based on the working conditions

4Stable dosing performance: improve pump efficiency as performance is not

affected by power supply fluctuations

4Reduce inventory holding

Intuitive programmingA new concept of programming menu

4Programming menu are self explanatory and available in 5 languages

4Intelligent Display, once a function is selected the pump will only display the

parameters to set, which are linked to the selected function

4Reduced programming time

HSHL

HP

HG

HRHK

000

01

4TECHNOLOGIESmythomytho

Code

100 ÷ 240 Vac50-60 Hz

24 ÷ 48 Vac (just for HS and HLersion)

HL 30 N H H 0 000

Analogue dosing pump with constant flow rate manually adjustable

Analogue dosing pump with constant flow rate manually adjustable

Analogue dosing pump with constant flow rate manually adjustable, with proportional flow rate accordingto an external analog (4÷20 mA) or digital signal (water meter)

Analogue

Digital dosing pump with constant flow rate manually adjustable, with proportional flow rate according toan external analog (4÷20 mA) or digital signal (water meter)

Digital dosing pump with pH/Redox control meter on board

Digital dosing pump with constant flow rate or timed

Digital

VersionInterfaceCode Description

ModelCode Pressure

[bar]Flow rate

[l/h]Fequency max[stroke./min]

Stroke capacity[cc/stroke]

Ø ConnectionsIN / OUT [mm]

Consumption[W]

20 18

2.53 120 0,35

0,424 / 6 suc.4 / 7 dis. 12,020

121082

4568

160

0,420,520,630,83

4 / 6 12,230

121051

7101518

300

0,390,550,83

1

4 / 6 23,940

542

0,1

20253854

300

1,111,392,11

3

8 / 12 22,250

2016106

0.40.81.21.5

120

0,060,110,160,21

4 /7 12,210

Power supplyCodeNO

Installation KitCodeP PVC

H PVDF

Materials

Pump head materialCode Balls DiaphragmPump head ConnectionsH Ceramic PTFEPVDF

SealsCode Materials

FPM

EPDM

OptionsCode Description

Standard

5TECHNOLOGIESmythomytho

Technical Features

5

4Casing made of PP

reinforced with glass fibre

4IP 65 rated

4PTFE diaphragm

4Level control input

4Priming valve

4Complete standard

installation kit composed

by: foot filter and injection

valve, PVC suction tube,

PE delivery tube and fixing

bracket

0

5

10

15

20

0 10 20 30 40 50 60

10

20

30

40

50

Pressure[bar]

Flow-rate[l/h ]

6TECHNOLOGIESmythomytho

Analogue Version

Analogue dosing pump with constant flowrate manually adjustable by control dial onthe front panel, two frequency range (0÷20%or 0÷100%), Power-ON led indicatorWithout level control input and fixing bracket

HS costant dosage

Analogue dosing pump with constant flowrate manually adjustable by control dial onthe front panel, two frequency range (0÷20%or 0÷100%), Power-ON led indicator

HL costant dosage

Analogue dosing pump with constant flowrate manually adjustable, proportional flowrate according to an external analogue (4÷20mA) or digital pulse signal (e.g. from watermeter).

4Control dial (percentage and "n" value inmultiplication mode)

46 position adjustable switch:- 3 in division mode (1, 4, 10 = n)- 1 in multiplication mode (n=1)- 1 for proportional 4÷20 mA signal- 1 for constant functionality

4“pacing” function adjustable by dip switch

HP proportional dosage

1:1

C

4:1

10:1

1:n

4-20

7TECHNOLOGIESmythomytho

Digital Version

Pompa elettromagnetica a dosaggiocostante con regolazione manuale,proporzionale a segnale digitale (contatore)o segnale analogico (4÷20 mA).E’ la versione ad interfaccia digitale della HPcon in aggiunta: funzione timer, dosaggio inppm, statistiche, password e ingresso On-Off(interruttore remoto)

HG proportional dosage

Digital dosing pump with pH/Redox controlmeter built in.4Digital interface for constant or proportional

dosing, depending on the measured pH orRx value

4PT100 probe input for thermalcompensation

4Repetition alarm relay4 Input On-Off for remote control44÷20 mA output for measure transmission

HR proportional dosage

Digital dosing pump with constant flow ratemanually adjustable, or timer control.4Programmable timed relay

HK timed dosage

8TECHNOLOGIESmythomytho

Accessories

The meters which we offer have high precision and sensitivity according to CEE standards. Their plastic and metallic parts,in particular those in contact with water, comply with current regulations and are subject to extensive checks and controls.

Threaded water meters

• Single jet water meter• Wet dial• Roller reading• Cold water up to 30 °C• Max. connection 2” (50 mm)

CBSeries

Woltmann Series

CB44 pulse/lt

CB11 pulse/lt

• Single jet water meter• Dry dial• Roller reading• Cold water up to 30 °C• Max. connection 2” (50 mm)

DRSeries

DR11 pulse/lt

• Single jet water meter• Wet dial• Roller reading• Hot water up to 90 °C• Max. connection 1”1/2 (40 mm)

HBSeries

HB44 pulse/lt

HB11 pulse/lt

• Single jet water meter• Wet dial• Roller reading• Cold water up to 30 °C• Max. connection 1”1/2 (40 mm)• Mounting for solenoid dosing

pump

CNSeries

CN44 pulse/lt

CN11 pulse/lt

• Single jet water meter• Wet dial• Roller reading• Cold water up to 30 °C• Max. connection 1”1/2 (40 mm)

RBFSeries

ConnectionsDN (mm)

502

652 1/2

803

1004

1506

WE 25

SizeDNInch

hydr

aulic

dat

adi

men

sion

dat

a

3003001501245

10000300285302228

240

250220272188

180

200200265184

160

200185258184

145

200165247184

125

3020151.24.5

10000

5055253

7.510000

8065403.212

10000

120120604.818

10000

Max flow (short period) Qmax m3/ltPortata con 0.1 bar di perdita carico m3/ltNominal flow Qn m3/ltMin flow (accuracy ±5%) Qmin m3/ltTransition flow (accuracy ±2%) Qt m3/ltMaximum reading m3

Length L mmWidth D1 mmHeight H mmFlange holes Ø mm

N°D2 mm

lt/pulse 25WE 50

50WE 100

100WE 250

250WE 500

500WE 1000

100050 50 50 - - -65 65 65 - - -80 80 80 - - -

100 100 - - - -- - - 150 150 150

Flanged Water Meters

131/2

203/4

251

301 1/4

401 1/2

502

SizeDNInch

hydr

aulic

dat

adi

men

sion

data

3015

4503000

10000

2010

200800

10000

105

100400

10000

73.570

28010000

52.5500200

10000

31.530

12010000

Max flow (short period) Qmax m3/ltNominal flow Qn m3/ltMin flow (accuracy ±5%) Qmin m3/ltTransition flow (accuracy ±2%) Qt m3/ltMaximum reading m3

Length without adapters L mmLength with thread mmWidth D1 mmHeight H mm

1101908090

1302288090

160260110120

160280100120

200340110130

300472152200

9TECHNOLOGIESmythomytho

Accessories

Tanks in polyethylene

TankCode

Capacity(Lt)

Height(cm)

Diameter(cm)

SER 50 50 45,5 40SER 100 100 64 46SER 250 250 87 59,5SER 300 300 95 67SER 500 500 118,5 76SER 1000 1000 122 108,5

Models and Technical FeaturesOur tanks are designed to assembledosing systems with mixers andmotor driven pumps or solenoiddosing pumps. All are made fromfood-safe polyethylene, resistant toalmost all chemicals normallyencountered.

Uncovered Tanks in Polyethylene

Code Tank Capacity(Lt)

Height(cm)

T150 SER 100 150 75,5T300 SER 250 300 87,5T400 SER 300 400 99T800 SER 500 800 120T1500 SER 1000 1500 134

Diameter(cm)51677290

122

Models and Technical FeaturesDesigned to contain ourtanks SER series

MixersElectric mixers three-phase (single-phase on request) andflange attachment. For tanks SER series.

Reinforcement

Code TankSML 100 SER 100SML 250 SER 250SML 300 SER 300SML 500 SER 500

SML 1000 SER 1000

ModelsTank reinforcement made of PVC (20 mm thick) to beused to install mixers and motor driven pumps orsolenoid dosing pumps on tanks SER series.

Slowmixers

[70 rpm]

Body Shaftlength (mm)

Motor(kW)

PVCAISI 316

600800900

1100

90 0,13

100250300

500/1000

150

220

Propeller diameter (mm)Fast (1400 rpm)Slow (70 rpm)

SERModel

Technical FeaturesFast

mixers[1400 rpm]

10TECHNOLOGIESmythomytho

Accessories

Suction Devices

HY Series adjustables valvesMaterial PVC

Max flow rate 50 l/h

Max pressure 10 bar

Connections 1/2” g.m., tube 8x12, tube 4x6

Diaphragm FPM (standard) or EPDM (upon request)

Max temperature of liquid 35 °C

It allows to resume the right dosing without any intervention fromthe user, in case you meter some products generating gases.

PVC body, FPM seals and Ceramic balls for the best chemicalcompatibility. Bear in mind: to be exclusively used combined with603 and 800 series pumps

Technical FeaturesMax temperature of liquid product 40° CMax flow rate reduction 20%

A suction filter is provided to protect pump valves from debris or particles that could obstruct the pump valve. Suctiondevices can also be supplied with integral level controls. These allow the use of alarms, and protect against the systemrunning dry.

• Easy to install• Standard FPM seals (EPDM upon request)• Made of PCV with clear PVC suction tubing• All suction devices are provided with a foot filter• All suction devices are provided with a non return valve

with levelprobe

without levelprobe

Dimensions (mm)Length x Ø

Tube4x6

Tube8x12

Tanksuitability

450 x 22 ● SER 50450 x 34 ●650 x 22 ● SER 100650 x 34 ●900 x 22 ● SER 250900 x 34 ●

Technical Features

1050 x 22 ● SER 3001050 x 34 ●1250 x 22 ● SER 500-10001250 x 34 ●

HYC backpressurevalves

HYM Multi valve

HYS Safety valves

Pump head with automaticdegassing valve

11TECHNOLOGIESmythomytho

Accessories

Multifunction valve

Valve body Diaphragm IN/OUT [mm]

PVC

PVDFPTFE 4/6(*)

Materials Ø ConnectionsMultifunction valve acts as: a backpressure valve, an anti-siphoningvalve, a safety valve, a priming valve,a delivery drain valve (formaintenance) . Multifunction valveis fitted directly on the delivery valveon the dosing pump.

Technical FeaturesSafety valve with pressure selection 6(*) - 12 barBack pressure valve with pressure 1.5 barMax temperature of liquid 40°C(*) 6 bar type, supplied with 8/12 tube connections

Body Seals IN/OUT [mm]

PVC FPM 4/6 - 8/12

Materials Ø Connessioni

300 ml

Model

Flow Sensor

Body Seals

PVC

PVDFPTFE

MaterialsIn order to assess the actual dosingphase, the flow sensor can be usedto detect the pump’s pulsationsduring the delivery phase: the sensorcan also be used to determine theactual dosing flow rate. This flowsensor is fitted directly on the deliveryvalve on the dosing pump.

Technical FeaturesMax pressure 10 barMax temperature ofliquid 40° C

Priming-aidPriming problems may occur ondosing pumps with a low flowrate, and also in case of excessivesuction heights in relationto the pump’s capacity. Thisaccessory is able to resolve theseproblems. Where possible it is fittedat the same height as thepump’s intake valve and a shortdistance from it.

Technical FeaturesMax temperature of liquid 40° C

Fixed / Adjustable backpressure valves

Corpo Valvola Membrana/ Tenute IN

PVDFFPM

EPDM4/6 mm

OUT

3/8” G

1/2” G

Materiali Ø Connessioni

The accuracy of the solenoid pumpscan be affected by the variation ofdelivery pressure, especially between0 and 1 bar. Using the backpressurevalve you can guarantee a constantdosing and avoid siphoning caseswhen metering in the tank.Moreover, dosing with abackpressure avoids to createsiphoning phenomena of the pump. Technical Features

Fixed VersionBackpressure 1,5 bar

Adjustable VersionBackpressure 0,5 ÷ 5 bar

Injection valves Material PVC

Max flow rate 50 l/h

Connections IN1/2” g.m., tube 8x12, tube 4x6

Connections OUT 1/2” g.m.

Max working pressure 10 bar

Seals FPM (standard)

or EPDM (upon request)

Max temperature of liquid 35 °C

TECHNOLOGIESmythomytho

Chemitec srlVia Isaac Newton 2850018 Scandicci - Firenze (Italy)tel: +39 055 756645 • fax +39 055 756697info@chemitec.it • www.chemitec.it

The technical data may be altered without prior warning. 2010 © Mytho Technologies - SDPUK01The drawings and images are for illustrative purposes only.