Dosage - Chapter 6
-
Upload
kaukau4ever -
Category
Documents
-
view
226 -
download
1
Transcript of Dosage - Chapter 6
Aira Jhamaica Dimacale
Pharmaceutical Dosage
Chapter 6: Powders and Granules
Powders
Intimate mixtures of dry, finely divided drugs and/or chemicals used externally or internally
Medicated powder:
Internal use: oral powder
External use: topical powder
Uses of Medicated Powders in Therapeutics
To fabricate solid dosage forms as tablets and capsule
Blended with powdered fillers and other pharmaceutical ingredients
To make various liquid dosage forms
Dissolved or suspended in solvents or liquid vehicles
To prepare medicated ointments and creams
Incorporated into semisolid bases
Medicated Powders
Internal use:
Taken orally after mixing with water
Some are inhaled for local effects (laxatives) or systemic effect (analgesic)
External use:
Dusted on the affected area from sifter-type container or applied from powder aerosol
Should bear a label marked external use only
Solid Materials
Characterized to determine their chemical and physical features before the preparation of pharmaceutical products including:
Morphology, purity, solubility, stability, particle size, uniformity, compatibility with any other formulation components
For efficient production of a finished dosage form: optimum therapeutic efficacy, adjustment and control of powder’s particle size
Definition of Some Terms
Sieves
For pharmaceutical testing and measurement, reduction of particle size of powders
Made of wire cloth woven (not coated or plated) from brass, bronze, and other suitable wire
Granules
Prepared agglomerates of powdered particles
Contain one or more active ingredients with or without other ingredients
4-12 sieve size range
Granulations of powders used in tablet making (12-20 sieve range)
Opening of Standard Sieves
Sieve Number Sieve Opening Sieve Number Sieve Opening
2.0 9.50 um 70.0 212.00 um
3.5 5.60 um 80.0 180.00 um
4.0 4.75 um 100.0 150.00 um
8.0 2.36 um 120.0 125.00 um
10.0 2.00 um 200.0 75.00 um
20.0 850.00 um 230.0 63.00 um
30.0 600.00 um 270.0 53.00 um
40.0 425.00 um 325.0 45.00 um
50.0 300.00 um 400.0 38.00 um
60.0 350.00 um
Particle Size and Analysis
Particles of pharmaceutical powders range from:
Extremely coarse: about 10 mm to 1 cm in diameter
Extremely fine: approaching colloidal dimensions of 1 micron or less
Micromeritics
Science of small particles
Characteristics included: particle size, angle of repose, bulk volume, size distribution, porosity, apparent density, shape, true volume, bulkiness
USP Standings for Powders of Animals and Vegetable Drugs
USP Descriptive Terms
Sieve Size: All Particles Pass Through
Fineness
Very Coarse (No. 8) 8 Not more than (nmt) 20% through
1
a no.60 sieve
Coarse (No.20) 20 Nmt 40% through a no.80 sieve
Moderately Coarse (No.40)
40 Nmt 40% through a no.80 sieve
Fine (No.60) 60 Nmt 40% through a no.100 sieve
Very Fine (No.80) 80 No limit to greater fineness
Purpose of Particle Size Analysis in Pharmacy
To obtain quantitative data of drug and other components used in pharmaceutical formulations on the size, distribution, and shape
Variety of Important Factors Particle Size can Influence
Dissolution rate of particles
Intended to dissolve
Drug micronization increases rate of drug dissolution and its bioavailability
Suspendability of particles
Intended to remain undissolved but uniformly dispersed in liquid vehicle
Example: fine dispersions have particles approximately 0.5 to 10 um
Uniform distribution of a drug substance in a powder mixture or solid dosage form
To ensure dose to dose content uniformity
Penetrability of particles
Inhaled for deposition deep in the respiratory tract
Example: 1 to 5 um
Nongrittiness of solid particles
In dermal ointments, creams, and ophthalmic preparations
Examples: fine powders may be 50-100 um in size
The Laser, Optics and Holography Rings
Sedimentation Rate
Particle size is determined by measuring the terminal setting velocity of particles through a liquid medium a gravitational and centrifugal environment
Range: 0.8 to 300 micrometers
Calculated using the Stoke’s Law
Methods for the Determination of Particle Size
Light energy diffraction or light scattering
Reduction in light reaching the sensor as the particle dispersed in a liquid or gas, passes through the sensing zone
Range: 0.2 to 500 micrometers
Laser holography
Particles individually imaged and sized
Pulsed laser fired through an aerolized particle spray and photographed in 3 dimensions (holographic camera)
Range: 1.4 to 100 micrometers
Cascade impaction
Principle: a particle driven by an air stream will heat a surface in its path but its inertia is sufficient to overcome the drag force that tends to keep it in the airstream
Particles separated into various size ranges by increasing the velocity of the airstream
Driven by an airstream will hit a surface in its path, provided that its inertia is sufficient to overcome the drag force that tends to keep in the airstreams
A single method may be sufficient.
Combination of methods preferred for certainty of size and shape parameters
Particle reduction points out: a decrease in particle size will result in an increase in the number of particles and total surface area (inversely proportional)
Comminution of Drugs
Pulverization by intervention
Reduction of particle size with the aid of a second agent that can be readily removed from the pulverized product
Example: camphor readily triturated with a few drops of alcohol or other volatile solvent (The pulverized camphor is readily recovered as the solvent evaporates.)
Levigation
2
Separate fine particles from coarse by grinding in water
Reducing particle size forming a paste of the solid with a minimum amount of a levigating agent and then triturating the paste in a mortar or on slab with a spatula
Small-scale preparation of ointments
Reduce the particle size and grittiness of added powders
Mortar and pestle or ointment tile is used.
Trituration and levigating agent: insoluble powder (mineral oil and glycerine)
The basis of choice of levigating agent:
Ability to form a smooth paste with the substance
Compatibility with the product
*** Water cannot be used for levigating a substance for oleaginous ointment base.
Comminution of Drugs on a Large-Scale
Various types of mills and pulverizers
Example: FitzMill Comminutor
Used for particle reduction with attached containment system for protection of environment and prevention of product combination
Collection or containment system:
Protects the environment form chemical dust
Reduces product loss
Prevents product contamination
Mixing or Blending Powders Spatulation
Movement of spatula on a sheet of paper or ointment tile
Not suitable for large quantities of powders or powders containing potent substances
Suited to mixing solid substances that form eutectic mixtures (or liquefy when in close and prolonged contact with one another)
Examples that form eutectic mixtures when combined: phenol, thymol, camphor, aspirin, menthol, phenyl salicylate and other similar chemicals
Trituration To comminute and to mix powders Geometric dilution method
Used when a small amount of potent substance is mixed with a large amount of diluents
Ensure the uniform distribution of the potent drug
Indicated when the potent and other ingredients are:
o Same color o Visible sign of mixing is
lacking Examples: strychnine sulfate, arsenic, mercury
bichloride, atropine in convenient concentration using lactose as the diluents for use at the Rx counter
Sifting Powders mixed by passing through the sifters:
results in light, fluffy product Not acceptable for incorporation of potent
drugs into a diluent powder Tumbling (rotating chamber)
Use of machine or motorized equipment for industrial purposes
Time consuming Small scale preparations: spatulation,
trituration, siftingTwin Shell Blender
Mixes solid particlesBlending of Powders
The “V” blender: an efficient and versatile blending machine for mixing and lubrication process of dry powders homogeneously
The ribbon blender: an efficient and versatile blending machine for mixing dry granules and powders homogeneously
Routes in Administering Medicated Powders For internal use:
Taken orally after mixing with water For constitution with a liquid solvent or vehicle Some inhaled for local and systemic effects Others as injection Others as vaginal douche
For external use: Dusted on the affected area (sifter-type
container) or applied from powder aerosol Should bear a label marked external use only
or a similar label
For oral use has: Local effects (ex. laxatives) Systemic effects (ex. analgesic)
Faster rate of dissolution and absorption (immediate contact with gastric fluids)
Preferred than tablets and capsules by patients who have difficulty in swallowing solid dosage forms
Administered as powders Doses of some drugs are too bulky
(can’t be made into a capsule or tablet of convenient size)
Medicated Powders Advantages:
Faster rate of dissolution and absorption Ease in compounding For eutectic mixtures
Disadvantages: Can’t mask undesirable taste Inconvenient to carry Inaccuracy in dose
Aerosol Powders
3
Administered by inhalation with the aid of dry-powder inhalers
Deliver micronized particles of medication in metered quantities 1um to 6um range in diameter
Treatment of asthma and other bronchial disorders Contain inert propellants and pharmaceutical diluents
such as crystalline alpha-lactose monohydrate To aid the formulation’s flow properties and
metering uniformity To protect the powder from humidity
Mechanical devices used: pressurized aerosols, spinhaler (cromolyn Na from capsules), blowers or insufflators
Powders to various parts of the body after depression of rubber bulb causing turbulence in the vessel forcing the powder out through the orifice in the tip
Insufflator Powder is placed in the vessel. When the rubber bulb is depressed, internal turbulence
disperses the powder and forces it from orifice.Insufflations
Finely divided powders introduced into the body cavities such as the ears, nose, throat, tooth sockets and vagina
Examples: Norisodrine Sulfate Aerohaler Cartridge
(Abbott): specialized equipment or inhalation Cromolyn Sodium Powder: relieve bronchial
asthmaTypes of Powders
Bulk powders Dispensing powder medication in bulk
quantities (nonpotent substances) Bulk powders available in prepackaged
amounts: Anatacids (ex. sodium bicarbonate)
and laxatives (ex. Psyllium: Metamucil)o Taken by mixing with water or
other beverage before swallowing
Douche powders (ex. Massengil Powder): dissolved in warm water by the patient for vaginal use
Mediacated topical anti-infectives: for external application to the skin (ex. bacitracin zinc and polymyxin B sulfate) or antifungals (ex. tolnaftate)
Non-medicated: Brewer’s yeast powder containing B-complex vitamins and other nutritional supplements
Divided Powders Form of individual dosing units (block
and divide method) Dispensed in chartulae (folded papers),
metal foil, small heat-sealed or resealable plastic bags
Based on the amount to be taken or used at a single time
Examples: headache powders, powdered laxatives, and douche powders
Properly blended using the geometric dilution method for potent substances
Block and divide method For nonpotent powders Entire amount of prepared powder on
a pill tileo With a large spatula divided
into equal amounts
Forms rectangular or square block of powder
Having uniform depth Each block transferred to a powder
paper and wrapped Geometric dilution method
Powders properly blended Small amount of potent substances
mixed with large amount of diluents Ensures uniform distribution of the
potent drug (same color with other ingredients and visible sign of mixing is lacking)
No powder in the folds, and should not escape with moderate agitation
Label placed on the container or affix a label of directions to each paper
Cellophane or plastic envelopes (moisture resistant resulting in uniform packaging) To enclose individual doses or units Used than folded individual powder
papers Advantages of divided powders:
Flexibility Rapid therapeutic effect Stability Ease of administration
Disadvantages of divided powders: Time consuming to prepare Not well suited for dispensing of
many unpleasant tasting hygroscopic drug
Inaccuracy
Papers that may be used Simple bond paper: opaque paper
with no moisture resistant properties Vegetable parchment: opaque
moisture resistant Glassine: glazed transparent moisture
resistant Waxed paper: transparent waterproof
paper Powders containing:
Hygroscopic and deliquescent materials: waterproof or waxed paper
Limited barrier against moisture is necessary: glassine and vegetable parchment papers
Volatile components: waxed or glassine papers
Neither volatile nor ingredients adversely affected by air moisture: white bond paper
Examples of finely divided powders: Oral powders: supplied as finely as
divided powders or effervescent granules
Douche powders: generally dissolved in warm water for vaginal use
Medicated or non-medicated powders: for external application
4
usually dispensed in sifter cans for convenient application the skin
Dentifrices or dental cleansing powders
Denture powders: for dentifrices or foe adhesive to hold dentures
Douche Powders Products completely soluble and are intended to be
dissolved in water prior to use as antiseptic or cleansing agent for body cavity
Components: Boric acid or borax Astringents as K alum, ammonium alum,
ZnSO4
Antimicrobial as oxyquinoline sulfate or povidone iodine
Quaternary ammonium compounds as benzethonium chloride
Detergents as sodium lauryl sulfate Oxidizing agents as sodium perborate Salts as sodium citrate, sodium chloride Aromatic as menthol, thymol, eucalyptol,
methyl salicylate and phenol Packaging: may be in a wide mouth glass jar to protect
from volatile constituents and by bulk powder boxesDentifrices
Form of bulk powder, generally containing flavors, soap or detergent, mild abrasive and a polishing agent
Forms: paste, powder, liquid, and block and solid Use: with a tooth brush for the purpose of cleansing the
accessible surfaces of the teeth Composition: abrasives such as calcium carbonate,
calcium phosphate, calcium sulfate, insoluble sodium metaphosphate, hydrated Al2O3, MgCO3, and phosphates, NaHCO3, and NaCl
Dentifrices contain non-carbohydrates sweetening agents but a few contain sugar
Dusting Powders
Non-toxic preparations for local application and therefore no systemic effect
Dispensing: should be dispensed in a very fine state of subdivision to enhance effectiveness and minimized irritation
Packaging: available in sifter type containers or pressure aerosols, the latter more expensive but protects from air, moisture and contamination
Uses: lubricants, absorbents, antiseptics, antipruritics, astringents, and antiperspirant
Official powdered vegetable drugs: Powdered Belladona Extract NF Powdered Digitalis Extract Powdered Ipecac USP Powdered Opium USP Powdered Rauwolfia Serpentina NF
Official powders: Ampicillin Soluble Powder: dry mixture of the
ampicillin and diluents and stabilizing Polymixin B Sulfate and Bacitracin Zinc Topical
Powder, USP: used as a topical anti-infective Compound Cloquinol Powder, USP: mixture of
cloquinol lactic acid, zinc stearate and lactose vaginal insufflations as an anti-chomonal
Nystatin Topical Powder USP: employed as a topical dusting powder in the treatment of the mycotic infections
Tolnaftate Powder USP: treatment of fungal infection
Official powders for topical use: Absorbable Dusting Powder: gloves lubricants Compound Iodochlorohydroxyquin Powder, NF:
vaginal insufflations as antimicrobial Methylbenzenthonium Chloride Powders, NF: local
anti-infectives for diaper rash in infantsGranules
Prepared aggromalates of smaller particles of powder Irregularly shaped but may be spherical 4-12 sieve size range, although granules of various mesh
sizes may be prepared depending upon their application Provide a pleasant vehicle for selected drug products
with bitter, salty taste Prepared by: wet method, dry method Examples:
Pricipen (ampicillin): for oral suspension (for reconstitution)
Senokot granules: for laxative Effervescent products as Bromo Seltzer K-Lyte: granulations of effervescent products
compressed into tablet
Preparation of granules: Wet Method:
One basic wet methodo Moisten the powder or powder
mixtureo Pass the paste through a
screen of the mesh size (to produce the desired size of granules)
o Granules are placed on drying trays and dried by air or under heat. Granules periodically moved on the drying trays to prevent adhesion into a large mass.
Another type of wet method Fluid bed process: particles
in a conical shaped equipment dispersed and suspended; liquid excipient sprayed and the product dried
Granules or pellets of defined particle size formed
Dry Granulation Method Dry method or fusion method:
material passed through a roll compactor then through a granulating machine
Also called slugging: compression of powder or a powder mixture under 8000-12000 pounds of pressure (depending on physical properties of powder)
5
Increases particle density and improves powder flow
Milling equipment: used to improve flow, reduce segregation, enhance drying, and limit wide particle size distribution
Characteristics of granules which are advantageous over powders:
Flow well More stable to atmospheric humidity Less likely to cake or harden upon standing Easily wetted by liquids
Effervescent granulated salts Granules or coarse to very course powders
containing a medicinal agent in a dry mixture Composition: sodium bicarbonate, citric acid,
tartaric acid If water is added: effervescence If tartaric only: loose firm If citric only: pasty Pleasant vehicle to mask of bitter and salty
tastes Example: sodium phosphate: cathartic Two methods of preparation:
Dry method or fusion method: binding agent for the powder mixture: one molecule or water present in each molecule of citric acid
Wet method: binding agent: water added to alcohol as the moistening agent not the water of crystallization from the citric acid: forming the pliable mass for granulation
o Examples: Zantac Efferdose tablets
o Lactinex granules: mixed culture of Lactobacillus acidophilus and Lactobacillus bulgaricus in 1g packets
o Treatment of uncomplicated diarrhea, usually mixed with water, beverages, sprinkled on food or eaten plain
Dry and wet methods: Objectives of using the method:
o To determine the proper formula for the preparation that will result in effective effervescent and effect of the product
o Efficient use of the acids and base present
o Stable granulationo Pleasant taste
6