DOCUMENT 00 91 00 ADDENDA DATE PROJECT PROJECT … 1 Compiled.pdf · Troy, MI 48098-3276 Ann Arbor,...

SHELBY TOWNSHIP

ACTIVITIES CENTER ADDENDUM 1

AEW PROJECT #0132-1007 MARCH 11, 2019

DOCUMENT 00 91 00

ADDENDA

ADDENDUM NUMBER 1 DATE: 03/11/2019 PROJECT: Shelby Township Activities Center PROJECT NUMBER: 0132-1007 OWNER: Charter Township of Shelby ARCHITECT/ENGINEER: Anderson, Eckstein & Westrick, Inc. TO: Prospective Bidders This Addendum forms a part of the Contract Documents and modifies the Bidding Documents dated February 28, 2019, with amendments and additions noted below. This Addendum consists of (33) total pages. The following changes to and/or clarifications of the Contract Documents will be incorporated in said Contract Documents and such changes shall be allowed for in the price bid by the Contractor, such that the price indicated in the Proposal shall represent the conditions as set forth in the original Contract Documents as modified by this Addendum. Acknowledgment of receipt of this Addendum and the Bidder’s Acceptance of these revised conditions prior to submittal of the bid shall be indicated by adding the Addendum number in the space provided in the Bid Form. Failure to do so may disqualify the Bidder.

SHELBY TOWNSHIP



A. BIDDER QUESTIONS AND RESPONSE:

Prebid Meeting Questions

1. Q: Will more information on the roofing system be provided? A: Yes, additional information will be issued with this addenda.

2. Q: When will addendum 1 be issued?

A: Addendum 1 will be issued on Monday March 11, 2019.

3. Q: What form of contract will be used? A: AIA A101-2017.

4. Q: Will more information on the awning system be provided? A: Yes, additional information will be issued with this addenda.

5. Q: Will the sign-in sheet be issued? A: Yes, the sign-in sheet is attached to this addenda.

6. Q: Will the gym floor be refinished? A: The base bid will include refinishing the floor to provide a secondary stain color for a walking track per the plans. The center court logo will also be repainted for the base bid. There is a bid alternate to refinish the entire floor.

7. Q: Are there labor requirements on the project?

A: The project does not require compliance with the Davis-Bacon act or other items requiring union labor.

8. Q: Will there be permit fees? A: Permit fees typically required from the Township will be waived. Permits will still need to be pulled, but fees will be waived. Permit fees from the County will be required, notably the erosion and sediment control permit. That fee should be included in the General Contractor’s fee.

9. Q: What are the project milestones? A: The mandatory pre-bid was held March 7, 2019. The deadline for questions is March 12, 2019. Bids will be received on March 26, 2019 per the specifications. The Township would like to award the contract at the April 16th board meeting. General Contractor interviews may take place the between receipt of the bids and the award of the contract. The anticipated completion date for construction is July 23, 2019.

10. Q: Will the Owner occupy any spaces during construction?

SHELBY TOWNSHIP



A: The Owner intends to have evening basketball leagues. The General Contractor should coordinate with the Owner on dates and availability.

11. Q: Will temporary partitions be required, if so, what kind? A: Yes. See specification section 1.19.D for requirements of temporary partitions. Fire rating required is revised to 1 hour.

12. Q: What will the work hours be? A: Normal work hours per the Township’s requirements.

13. Q: What is the scope of the owner performed work? A: The scope of the owner performed work is shown on the drawings.

14. Q: Are there any asbestos or other hazardous materials in the building? A: There are none to the best of the Owner’s knowledge.

15. Q: How will builders risk insurance be handled? A: Shelby Township will provide the builders risk insurance.

16. Q: When the existing exterior signage is removed how will the walls be patched? A: Tooth-in new brick to match existing brick where exterior walls are damaged from the removal of signage. At interior Gym wall grout holes solid and prepare to receive new paint finish.

17. Q: When the existing CMU walls are removed from the office area, how will they be patched? A: Tooth-in face shells as required to patch the existing walls that remain where they intersect walls that were demolished.

18. Q: Is the logo in the center of the basketball court painted or a sticker? A: Painted.

19. Q: Will the lightning protection system need to be recertified? A: Yes, see the electrical sheets for additional information.

20. Q: What are the extents of the roof replacement? A: The entire roof will be replaced.

21. Q: Who do Contractors contact for additional tours? A: Joe Youngblood, his phone number is 586-731-0300.

SHELBY TOWNSHIP



B. DOCUMENT REVISIONS:

ARCHITECTURAL

1. SHEET A011: (reissued) a. Thermal and Moisture Protection notes: Deleted notes 2, 3, 5, 6, 7, and 8 that

do not apply to this project. b. General Demolition Notes: Changed title of General Construction Notes to

General Demolition Notes. c. General Note 20: Deleted General Note 20 that does not apply to this project. d. General Note 22: Changed warranty to two year to agree with specifications.

2. SHEET A031: (reissued) a. Division 4 Item 7: Added note on masonry tuckpointing. b. Division 4 Item 8: Added note on CMU type. c. Division 4 Item 9: Added note on brick type. d. Division 7 Item 2: Provided additional information on membrane roofing. e. Division 7 Item 5: Provided information on aluminum awning system. f. Division 9 Item 10: Added color selection for solid surface material. g. Division9 Item 11: Added color selection for P-Lam 1. Removed types P-Lam 2

& 3. h. Division 9 Item 14: Added material note for VCT-1.

3. SHEET A100: (reissued) a. Removed General Demolition Notes, which were duplicated from another

sheet. b. Demolition Keynotes Notes 1: Revised note. c. Demolition Keynotes Notes 10: Revised note.

4. SHEET A101: (reissued) a. Floor Plan Keynotes Note 2: Revised reference for transaction counter to sheet

A411. b. Floor Plan Keynotes Note 4: Revised note to vinyl flooring. c. Floor Plan Keynotes Note 12: Revised reference to 1 & 2/A411. d. 1st Floor New Construction Plan: Added door tag for door 103.

5. SHEET A111: (reissued) a. Ceiling Legend: Revised symbol for 24” x 24” Susp. Acoustical Lay-in Ceiling.

6. SHEET A121: (reissued) a. Roofing Notes: Revised note 2.

7. SHEET A411: (reissued) a. 4/A411: Added note for ADA pipe cover. Added casework finish note to be P.

Lam-1. b. 5/A411: Revised casework finish note to be P. Lam-1. c. 6/A411: Added note for ADA pipe cover. Revised casework finish note to be P.

Lam-1. d. 7/A411: Revised P. Lam selection. e. 8/A411: Revised casework finish note to be P. Lam-1. f. 9/A411: Revised counter material to be new solid surface.

SHELBY TOWNSHIP



g. 10/A411: Revised casework finish note to be P. Lam-1. h. A/A411: Added door tag for door 103. Added note to tooth-in face shells to

patch exist. CMU walls. i. B/A411: Revise countertop finish to solid surface.

8. SHEET A412: (reissued) a. 1/A412: Revised locations of paint band. Revised location of signage. b. 2/A412: Revised locations of paint band. c. 4/A412: Revised locations of paint band. d. 5/A412: Revised locations of paint band. e. 7/A412: Revised locations of paint band. Clarified scope of owner painting. f. 8/A412: Revised locations of paint band. Clarified scope of owner painting. g. 9/A412: Revised locations of paint band. Clarified scope of owner painting. h. 10/A412: Revised locations of paint band. Clarified scope of owner painting.

9. SHEET A511: (reissued) a. 1/A511: Added note on edge of solid surface. b. 3/A511: Added note on door pulls. c. 7/A511: Added note on edge of solid surface.

10. SHEET A601: (reissued) a. Door Elevations: Added door elevation “E” for swinging gate door. b. Door Schedule: Added door 103. c. 3/A601: Removed reference to Structural sheets that do not exist.

11. SHEET A611: (newly issued) a. Room Finish Abbreviations: Added abbreviation for LV for Luxury Vinyl. b. Room Finish Schedule: Revised flooring to VCT-1 in the following rooms:125,

126, 127, 131, 134, & 135. 12. SPECIFICATION 00 20 00 (not reissued)

a. Title of project revised to be Shelby Township Activities Center. 13. SPECIFICATION 00 41 00: (reissued)

a. Added unit cost for masonry tuckpointing to bid form. 14. SPECIFICATION 01 50 00: (not reissued)

a. 1.19.D.2.c – Revise fire rating to 1 hour rating.

MECHANICAL

(See attached write and documents up by Peter Basso Associates, Inc.) ELECTRICAL

(See attached write up and documents by Peter Basso Associates, Inc.)

C. SUBSTITUTIONS:

a. None requested at this time.

SHELBY TOWNSHIP



D. ATTACHMENTS:

a. Write-up by Peter Basso Associates, Inc. b. Pre-bid sign-in sheet. c. SHEET A011 d. SHEET A031 e. SHEET A100 f. SHEET A101 g. SHEET A111 h. SHEET A121 i. SHEET A411 j. SHEET A412 k. SHEET A511 l. SHEET A601 m. SHEET A611 n. SHEET M003 o. SHEET M201 p. SHEET M401 q. SHEET M702 r. SHEET M801 s. SHEET MD201 t. SPECIFICATION SECTION 00 41 00

End of Addenda

Mechanical

Electrical Energy Management

Communication Technologies Architectural Lighting Design

Commissioning

5145 Livernois, Suite 100 2001 Commonwealth Blvd., Ste. 203 Troy, MI 48098-3276 Ann Arbor, MI 48105 Tel: 248-879-5666 Tel: 734-913-4749 Fax: 248-879-0007 Fax: 734-913-4957

www.PeterBassoAssociates.com

ADDENDUM

Project Name: Shelby Township Activity Center

PBA Project Number: 2018.0451

Addendum Number: 1

Date: March 11th, 2019

Each Bidder’s proposal shall include the work described herein. Unless otherwise indicated, the work described herein shall comply with, and be equal in all respects to, the original Specifications and the Drawings accompanying same. Include incidental work required to properly complete the work, whether stated herein or not. Drawings Issued: M003, MD201, M201, M401, M702, M801. Mechanical Drawing Items: MD-1 Refer to Sheet M003

1. Revised specifications as indicated.

MD-2 Refer to Sheet MD201

1. Clarified existing vent piping as indicated. 2. Removed demo hatching for existing sink as indicated.

MD-3 Refer to Sheet M201

1. Removed plumbing general note 11 as indicated. 2. Revised fire protection general note 6 as indicated. 3. Removed fire protection general note 7 and 8 as indicated. 4. Clarified existing vent piping as indicated. 5. Clarified graphic issue for new plumbing fixtures as indicated.


1. Added CFM indication to existing diffusers as indicated. MD-5 Refer to Sheet M702

1. Added note 8 to unitary rooftop air conditioning unit schedule as indicated.

PETER BASSO ASSOCIATES, INC. Shelby Township Activities Center PBA Project No. 2018.0451 Addendum No. 1 March 11, 2019 Page 2


1. Removed temperature control details as indicated.

End of Addendum.

G:\2018\2018-0451-00\Bidding\Addendum Writeups\Addendum 01\Addendum 1 writeup.docx

ECKSTEIN AND

WESTRICK, INC.

ANDERSON,

COPYRIGHT, 2018, ANDERSON, ECKSTEIN AND WESTRICK, INC.

BEFORE YOU DIG

811CALL MISS DIG

(TOLL FREE)

3 WORKING DAYS

Phone 586 726 1234

Fax 586 726 8780

51301 Schoenherr Road

Shelby Township

Michigan 48315

www.aewinc.com

SHEET TITLE:

CHECKED BY:DRAWN BY:

SCALE:

PRELIMINARY

PROJECT NO.

SHEET NO.

CLIENT:

PROJECT NAME:

CONSTRUCTION RECORD

DATE:

UTILITY INFORMATION, AS SHOWN, INDICATES APPROXIMATE LOCATIONS AND TYPES OF EXISTING FACILITIES ONLY, AS DISCLOSED BY RECORDS PROVIDED TO THIS FIRM FROM THE VARIOUS UTILITY COMPANIES. NO GUARANTEE IS GIVEN OR IMPLIED AS TO THE COMPLETENESS OR ACCURACY THEREOF.

PRIOR TO CONSTRUCTION, ALL LOCATIONS AND DEPTHS OF EXISTING OVERHEAD AND UNDERGROUND UTILITIES (IN CONFLICT WITH THE CONSTRUCTION OF THESE PROPOSED IMPROVEMENTS) SHALL BE VERIFIED IN THE FIELD. DURING THE CONSTRUCTION, THE CONTRACTOR SHALL PROTECT AND SUPPORT ALL UTILITIES THAT ARE ENCOUNTERED. ( ALL COSTS FOR UTILITY LOCATION VERIFICATION, SUPPORT AND PROTECTION SHALL BE INCLUDED IN THE PROPOSED PAY ITEM CONFLICTING WITH THAT UTILITY ).

DURING CONSTRUCTION, THE CONTRACTOR SHALL USE EXTREME CAUTION WHEN OPERATING NEAR ANY AND ALL OVERHEAD AND/OR BURIED UTILITIES.

CALL MISS DIG

Civil EngineersSurveyorsArchitects

Engineering StrongCommunities

M:\0132\0132-1007\Dwg\Arch\Shelby Township Activities CenterRenovation-CentralModel - MLB.rvt3/11/2019 2:01:20 PM

A011

0132-1007

SHELBY

TOWNSHIP

ACTIVITIES

CENTER

MLB

GENERAL PROJECT

INFORMATION

MLB 02/22/2019

SHELBY TOWNSHIP

1. THE CONTRACTOR SHALL BE RESPONSIBLE FOR LOCATING AND PROTECTING EXISTING UNDERGROUND UTILITIES IN THE AREA OF CONSTRUCTION.

2. THE CONTRACTOR SHALL COORDINATE HIS WORK ACTIVITIES WITH THE OWNER TO MINIMIZE DISRUPTION TO THE OWNER'S OPERATION OF THE FACILITY.

3. FOUNDATIONS SHALL BEAR ON COMPACTED SOIL FREE OF VEGETATION AND ORGANIC MATERIALS WITH A MINIMUM ALLOWABLE BEARING CAPACITY OF 2500 PSF. THE CONTRACTOR SHALL RETAIN THE SERVICES OF A GEOTECHNICAL ENGINEER, REGISTERED IN THE STATE OF MICHIGAN, TO VERIFY PERMISSIBLE BEARING CAPACITY VALUES. SUBMIT A REPORT OF THE SOIL CONDITIONS AND CAPACITIES ENCOUNTERED TO THE ENGINEER FOR RECORD.

SITE CONDITIONS

1. REFER TO "MATERIAL AND INSTALLATION NOTES" ON DRAWINGS.

4. CAULK DOOR AND WINDOW FRAMES AT MASONRY WALLS. CAULK COMPOUND SHALL BE AN ELASTIC, WATERPROOF ADHESIVE FROM AN APPROVED MANU-FACTURER. COLOR SELECTION BY ARCHITECT.

THERMAL AND MOISTURE PROTECTION

1. REMOVE ALL ABANDONED MISC. HARDWARE, ACCESSORIES, SUPPORTS, BRACKETS, ANCHORS ETC. IN AREAS OF DEMOLITION (TYPICAL).

2. REMOVE ALL ABANDONED WIRING, CABLES, RACEWAYS, SWITCHES AND OUTLETS AS REQUIRED.

3. CUT AND CAP ALL ABANDONED PLUMBING BEHIND WALL.

4. REMOVE ALL MISC. ATTACHMENTS THAT INTERFERE WITH NEW CONSTRUCTIONOR AS SHOWN ON PLANS.

5. OWNER HAS FIRST SALVAGE RIGHTS ON ALL ITEMS AND EQUIPMENT, VERIFY SALVAGE OF ITEMS AND EQUIPMENT WITH OWNER.

6. CONTRACTOR SHALL FIELD VERIFY ALL EXISTING CONDITIONS AND DIMENSIONS BEFORE DEMOLITION AND/OR CONSTRUCTION. CONTRACTOR SHALL COORDINATE DEMOLITION AND CONSTRUCTION TO COMPLETE WORK AS DEFINED ON PLAN, ELEVATIONS AND DETAILS.

7. COORDINATE ALL DIMENSIONS WITH PROPOSED CONSTRUCTION.

8. CONTRACTOR SHALL MAINTAIN ALL EXISTING UTILITIES DURING DEMOLITION & CONSTRUCTION. (WATER, SEWER, ELECTRICAL, GAS) VERIFY ALL EXISTING LOCATIONS.

9. CONTRACTOR SHALL PROTECT ALL BUILDING ELEMENTS DURING CONSTRUCTION, RESTORE AS REQUIRED.

10. ELEMENTS LABELED AS EXISTING ARE TO REMAIN UNLESS NOTED OTHERWISE.

11. DASHED LINES INDICATE ITEMS TO BE REMOVED AS NOTED.

12. REMOVE ALL EXISTING ELECTRICAL LIGHTING FIXTURES AS INDICATED ON PLAN OR THAT INTERFERE WITH CONSTRUCTION.

13.REMOVE ALL EXISTING OUTLETS, SWITCHES AND COVER PLATES AS SHOWN ON PLANS OR THAT INTERFERE WITH CONSTRUCTION.

14.REMOVE ALL MECHANICAL GRILLES, LOUVERS AND DIFFUSERS AS SHOWN ONPLAN OR THAT INTERFERE WITH CONSTRUCTION.

15.COORDINATE AND VERIFY ALL DEMOLITION DIMENSIONS WITH ARCHITECTURAL DIMENSIONS.

16.COORDINATE ALL DEMOLITION WITH MECHANICAL AND ELECTRICAL.

17.CONTRACTOR SHALL REMOVE ALL ITEMS (ATTACHED OR OTHERWISE) WHICH REQUIRE REMOVAL OR ARE AFFECTED BY THE PROPOSED NEW CONSTRUCTION. THE CONTRACTOR SHALL FAMILIARIZE WITH THE EXISTING CONDITIONS ANDSHALL COMPLETE ALL REQUIRED DEMOLITION (REGARDLESS WEATHER EACHINDIVIDUAL ITEM HAS BEEN IDENTIFIED).

18.THE CONTRACTOR SHALL LEVEL / ADJUST SUBFLOOR AND OR CONCRETE FLOOR SLAB AS REQ'D FOR FLOOR FINISH.

GENERAL DEMOLITION NOTES

1. THE CONTRACTOR IS RESPONSIBLE FOR ALL PERMITS, FEES AND INSPECTIONS.

2. ALL CONTRACTORS SHALL COORDINATE THE LOCATION OF DUCTS, PIPING, BOXES, CHASES, CONDUITS, ETC... WITH THE MECHANICAL, ELECTRICAL AND ALL OTHERTRADES.

3. PITCH ALL GRADES AND EXTERIOR SLABS AWAY FROM BUILDING TOWARDS DRAINAGE.

4. SEAL/MORTAR ALL OPENINGS AROUND PIPES, CONDUITS, ETC.... WHICH PASS THROUGHFLOORS AND WALLS.

5. CAULK ALL JOINTS BETWEEN DOOR FRAMES, WINDOW FRAMES, MASONRY WALLS ANDALL DISSIMILAR MATERIALS.

6. PROVIDE ALL NECESSARY BLOCKING AS REQUIRED TO SUPPORT LIGHTING, SIGNS,BRACKETS, ACCESSORIES, ETC....

7. ALL DIMENSIONS ARE FROM FACE OF STUD TO FACE OF STUD OR FACE OF BLOCK TO FACE OF BLOCK.

8. ALL ITEMS NOTED "BY OWNER" OR "N.I.C." ARE NOT IN CONTRACT.

9. ALL BLOCK CORNERS SHALL BE BULLNOSE.

10. CONTRACTOR TO INSTALL ONLY TYPE "X" FIRECODE GYPSUM BOARD BOTH SIDES OFSTUD WALL FULL HEIGHT OF PARTITION TO UNDERSIDE OF STRUCTURE (TIGHT) ATRATED WALLS IE. STORAGE ROOM AND ELEC. / MECHANICAL.

11. CONTRACTOR SHALL CHECK AND VERIFY ALL DIMENSIONS EXISTING AND PROPOSEDON THE JOB. REPORT ALL DEVIATIONS FROM DRAWINGS PRIOR TO START OF

CONSTRUCTION.

12. ALL CONTRACTORS SHALL CONSTRUCT THIS PROJECT IN ACCORDANCE WITH ALLSTATE, FEDERAL AND LOCAL CODES.

13. ALL CONTRACTORS SHALL REPAIR ANY DAMAGES OR DISTURBANCES TO THE EXISTING BUILDING AND SITE. PATCH / REPAIR AND PAINT ANY ITEM DISTURBED FROM DEMOLITION.

14. ALL WOOD AND MISC. BLOCKING MUST BE NON-COMBUSTIBLE MATERIAL.

15. ALL INTERIOR CONTROL JOINTS SHALL BE CONSTRUCTED AT 20'-0" O.C. MAXIMUM UNLESS NOTED OTHERWISE.

16. ALL MATERIALS USED ARE REQUIRED TO BE OF GOOD QUALITY AND MEET OR EXCEED ALL APPLICABLE INDUSTRY STANDARDS.

17. ALL WORK IS TO BE DONE WITH THE APPROPRIATE TOOLS AND MATERIALS. THE ARCHITECT HAS THE RIGHT TO REJECT ANY WORK NOT DONE APPROPRIATELY.

18. REMOVE ALL TRASH AND DEBRIS FROM THE SITE DAILY. WASH ALL SURFACES DUSTAND SWEEP TO REMOVE ALL DIRT. REMOVE ALL TEMPORARY LABELS.

19. REPLACE ALL CONCRETE FLOOR WHICH WAS REMOVED AND OR DAMAGED FOR / DURING CONSTRUCTION. PREP. FOR FLR. FIN.

21. ALL CONTRACTORS AND SUBCONTRACTORS SHALL PROVIDE ALL WORK SHOWN IN ANY PART OF THE DOCUMENTS, I.E. HAND DRYER SHOWN ON ARCHITECTURAL DRAWINGS

MUST BE WIRED BY THE ELECTRICIAN WHETHER IT IS OR IS NOT SHOWN ON THE ELECTRICAL DRAWINGS.

22. THE GENERAL CONTRACTOR SHALL PROVIDE A MIN. 2 YEAR (U.N.O.) WARRANTY ON ALL MATERIAL, EQUIPMENT AND WORK PERFORMED.

23. THE GENERAL CONTRACTOR SHALL SUBMIT SEALED ENGINEERED FIRE SUPPRESIONSYSTEM DESIGN DRAWINGS AND SPECIFICATIONS AS A DELAYED SUBMITTAL TO AUTHORITIES HAVING JURISDICTION COMPLIANT WITH ALL APPLICABLE CODES AND REQUIREMENTS, INCLUDING, BUT NOT LIMITED TO MICHIGAN BUILDING CODE AND NFPAREQUIREMENTS.

GENERAL NOTESNOTE: NOT ALL ABBREVIATIONS USED.

ABBREVIATIONS INCLUDE BUT NOT LIMITED TO THIS LIST.

ABBREVIATIONS

SYMBOL KEY

A.F.FACCOMACCORDA.C.P.ACOUSADALTALUM.ARCH@BRGB PLBITBLKBRDBOTTBRKTBLDGCABCLG.CLCIRCCLOCOLCOMPCONC.CMUCONF.CONSTCONTCOORDCRCRSDEMODIADIMDIVDRDNDSELEC.EWCECELEV.ENGEQEXIST.EXPEJEXTEFFWCF.V.F.R.P.FINFFFEFECFLRFDFTGGAGALVGCGWBGWB-X

HVAC

HT.H.M.HORIDINSJTJSTKSFLAM.LIN FTLLVLAVLH

ABOVE FINISH FLOORACCOMMODATEACCORDANCEACOUSTICAL PANELACOUSTICALACCESS DOORALTERNATEALUMINUMARCHITECTATBEARINGBEARING PLATEBITUMINOUSBLOCKBOARDBOTTOMBRACKETBUILDINGSCABINETCEILINGCENTER LINECIRCULATIONCLOSETCOLUMNCOMPUTERCONCRETECONCRETE MASONRY UNITCONFERENCECONSTRUCTIONCONTINUOUSCOORDINATECOAT RACKCOURSESDEMOLISH, DEMOLITIONDIAMETERDIMENSIONDIVISIONDOORDOWNDOWN SPOUTELECTRICALELECTRICAL WATER COOLERELECTRICAL CONTRACTORELEVATION, ELEVATORENGINEEREQUALEXISTINGEXPANSION, EXPOSEDEXPANSION JOINTEXTERIOREXHAUST FANFABRIC WALL COVERINGFIELD VERIFYFIBERGLASS REINFORCED PANELFINISHFINISHED FLOORFIRE EXTINGUISHERFIRE EXTINGUISHER CABINETFLOORFLOOR DRAINFOOTINGGAGE, GAUGEGALVANIZEDGENERAL CONTRACTORGYPSUM DRYWALL (WALLBOARD)GWB TYPE-X (FIRE RESISTIVE CLASSIFICATION)HEATING, VENTILATION, AND AIR CONDITIONINGHEIGHTHOLLOW METAL STEELHORIZONTALINSIDE DIAMETERINCHESJOINTJOISTKIPS PER SQUARE FOOTLAMINATELINEAR FOOTLONG LEG VERTICALLAVATORYLEFT HAND

LHR MFR MAX MECH. MC M.P.E. MET MIN MISC.N/A NIC NTS NRC NO OR # OC OPP. OD OH PLAS.PL PLYWD PO PSI PSF PVC RWC RECPT REC REF. REINFRE-BAR REP REQ RF RFM RH RHR ROW RD RM RO SCHED. SIM. SPEC SPKLR SS STD STL STL JSTSTL STD STOR STRUCT. STR STL SUSP. SYS TEL TEMP. T T & G TOC TOF TOS TOW TOM TYP. UNO UR VB VIF VERT VCT VWB VWC WAIT WC WT WWF W/ W/O WD. ' " #

LEFT HAND REVERSE MANUFACTURER MAXIMUM MECHANICAL MECHANICAL CONTRACT (OR) MECHANICAL, PLUMBING, ELECTRICAL METAL MINIMUM MISCELLANEOUS NOT APPLICABLE NOT IN CONTRACT NOT TO SCALE NOISE REDUCTION COEFFICIENT NUMBER ON CENTER OPPOSITE OUTSIDE DIAMETER OVERHEAD PLASTIC PLATE PLYWOOD POLYETHYLENE POUNDS PER SQ. INCH POUNDS PER SQ. FOOT POLYVINYL CHLORIDE RAIN WATER CONDUCTOR RECEPTION RECESSED REFLECTED REINFORCING REINFORCING BARS REPRESENTATIVE REQUIRED ROOF FAN RECESSED FLOOR MAT RIGHT HAND RIGHT HAND REVERSE RIGHT OF WAY ROOF DRAIN ROOM ROUGH OPENING SCHEDULE SIMILAR SPECIFICATION SPRINKLER STAINLESS STEEL STANDARD STEEL STEEL JOIST STEEL STUD STORAGE STRUCTURE STRUCTURAL STEEL SUSPENDED SYSTEM TELEPHONE TEMPERED TEMPERED GLAZED TONGUE AND GROOVE TOP OF CURB TOP OF FOOTER TOP OF STEEL TOP OF WALL TOP OF MASONRY TYPICAL UNLESS NOTED OTHERWISE URINAL VAPOR BARRIER VERIFY IN FIELD VERTICAL VINYL COMPOSITE TILE VINYL WALL BASE VINYL WALL COVERING WAITING WATER CLOSET WEIGHT WELDED WIRE FABRIC WITH WITH OUT WOOD FOOT, FEET INCH, INCHES POUNDS

XXXXXXXX

X

ROOM NAME

ROOM NUMBER

XXXXXX

LOCATION

SHEET NUMBER

XXXXXX

DOOR NUMBER

X

LOCATION

SHEET NUMBER

SECTION

DETAIL/ENLARGED PLAN

ROOM LABEL

DOOR LABEL

XXX

LOCATION

SHEET NUMBER

ELEVATION

XX

DATE SUBMITTALS/REVISIONS

02/28/2019 BID ISSUE

03/11/2019 ADDENDUM 1

ECKSTEIN AND

WESTRICK, INC.

ANDERSON,


BEFORE YOU DIG

811CALL MISS DIG

(TOLL FREE)

3 WORKING DAYS

Phone 586 726 1234

Fax 586 726 8780


Shelby Township

Michigan 48315

www.aewinc.com

SHEET TITLE:


SCALE:

PRELIMINARY

PROJECT NO.

SHEET NO.

CLIENT:

PROJECT NAME:

CONSTRUCTION RECORD

DATE:




CALL MISS DIG




A031

0132-1007

SHELBY

TOWNSHIP

ACTIVITIES

CENTER

MLB

SPECIFICATIONS

MLB 02/22/2019

SHELBY TOWNSHIP

DIVISION 1 - GENERAL REQUIREMENTS

1. ALL WORK SHALL COMPLY WITH STATE AND LOCAL BUILDING CODES AS THEY APPLY.

2. THE ENTIRE BUILDING SHALL BE ACCESSIBLE TO THE PHYSICALLY HANDICAPPED AND MEET ALL REQUIREMENTS OF A.D.A. & MICHIGAN BARRIER FREE DESIGN CODE.

3. ALL PROVISIONS OF "DIVISION 0" BIDDING REQUIREMENTS, CONTRACTS, FORMS AND CONDITIONS OF CONTRACT AND "DIVISION 1" - GENERAL REQUIREMENTS, FORM A PART OF EACH DIVISION GIVEN ON THIS DRAWING SHEET.

4. CONTRACTOR IS RESPONSIBLE FOR ALL PERMITS, FEES AND INSPECTIONS.

5. CONTRACTOR IS REQUIRED TO CARY WORKERS, LIABILITY, AND BUILDERS RISK INSURANCE POLICIES.

6. CONTRACTORS AND SUBCONTRACTORS SHALL PROVIDE ALL WORK SHOWN IN ANY PART OF THE DOCUMENTS, I.E. HAND DRYER SHOWN ON ARCHITECTURAL DRAWINGS MUST BE WIRED BY THE ELECTRICIAN WHETHER IT IS OR IS NOT SHOWN ON THE ELECTRICAL DRAWINGS.

7. CONTRACTOR SHALL PROVIDE A MIN. 2 YEAR WARRANTY ON ALL MATERIAL, EQUIPMENT AND WORK PERFORMED.

GENERAL TRADES SPECIFICATIONS

DIVISION 3 - CONCRETE

1. CONCRETE CONSTRUCTION SHALL COMPLY WITH ACI 301 "SPECIFICATIONS FOR STRUCTURAL CONCRETE FOR BUILDINGS" (LATEST EDITION), ACI 318 "BUILDING CODE REQUIREMENTS FOR REINFORCED CONCRETE" (LATEST EDITION), AND ACI 302 "GUIDE FOR CONCRETE FLOOR AND SLAB CONSTRUCTION" (LATEST EDITION).

2. REINFORCING STEEL SHALL BE DETAILED, FABRICATED AND PLACED IN COMPLIANCE WITH ACI 315 (LATEST EDITION) "DETAILS AND DETAILING OF CONCRETE REINFORCEMENT" AND THE CRSI "MANUAL OF STANDARD PRACTICE" (LATEST EDITION). THE CONTRACTOR SHALL SUBMIT REINFORCING STEEL SHOP DRAWINGS FOR THE ENGINEER'S REVIEW. SUBMITTAL SHALL INCLUDE TWO (2) BLACKLINES (MINIMUM).

3. CONCRETE USED IN SLAB ON GROUND SHALL BE NORMAL WEIGHT CONCRETE AND SHALL DEVELOP A MINIMUM COMPRESSIVE STRENGTH OF 4000 PSI AT 28 DAYS, UNLESS OTHERWISE NOTED. CEMENT SHALL COMPLY WITH ASTM C150, TYPE I. MINIMUM CEMENT CONTENT SHALL BE 611 POUNDS PER CUBIC YARD.

4. CONCRETE USED IN BUILDING FOUNDATIONS AND ALL OTHER CONCRETE UNLESS NOTED OTHERWISE SHALL DEVELOP A MINIMUM COMPRESSIVE STRENGTH OF 3000 PSI AT 28 DAYS. CEMENT SHALL COMPLY WITH ASTM C150, TYPE I. MINIMUM CEMENT CONTENT SHALL BE 526 POUNDS PER CUBIC YARD.

5. CONCRETE AGGREGATES SHALL COMPLY WITH ASTM C33 AND SHALL FREE OF CLAY, LOAM, LUMPS OR OTHER DELETERIOUS SUBSTANCES.

6. REINFORCING SHALL BE DEFORMED BARS CONFORMING TO ASTM A615 OR ASTM A616 (GRADE 60) AND SHALL HAVE A MINIMUM YIELD STRENGTH OF 60 KSI. WELDED WIRE FABRIC SHALL CONFORM TO ASTM A185.

7. CONCRETE USED FOR BUILDING AND DOCK FOUNDATIONS SHALL BE AIR ENTRAINED WITH 6% AVERAGE AIR CONTENT WITH A 1 1/2% TOLERANCE. AIR ENTRAINMENT SHALL COMPLY WITH ASTM C260.

8. REINFORCING SHALL HAVE EITHER TENSION EMBEDMENT OR TENSION CLASS "B" LAP SPLICE UNLESS OTHERWISE NOTED.

9. PROVIDE HORIZONTAL BENT BARS AT CORNERS AND INTERSECTIONS OF CONCRETE WALLS, TRENCH FOOTINGS AND STRIP FOOTINGS USING THE SAME SIZE AND SPACING AS FOR THE HORIZONTAL REINFORCING DETAILED UNLESS OTHERWISE NOTED.

10. PROVIDE SMOOTH FORMED FINISH ON EXPOSED CONCRETE WALLS AND FOUNDATIONS.

11. PROVIDE 3/8 INCH x 45 DEGREE BEVELED EDGES AT TOP OF WALLS AND PIERS.

12. CONSTRUCTION JOINTS SHALL HAVE A FORMED KEY CENTERED ON MEMBER. WHERE THE SIZE OF KEY IS NOT SHOWN ON THE DRAWINGS, THE KEY WIDTH SHALL BE ONE FOURTH OF THE CROSS SECTION. DIMENSION OF THE MEMBER AND THE KEY DEPTH SHALL BE 10 PERCENT OF THE CROSS SECTION DIMENSION OF THE MEMBER WITH A MINIMUM DIMENSION OF 3/4 INCH.

13. DO NOT PROCEED WITH DETAILING, FABRICATION, OR CONSTRUCTION OF ANY WORK CONNECTED WITH OR DEPENDENT ON EQUIPMENT FURNISHED BY OWNER OR OTHER CONTRACTORS UNTIL DIMENSIONS AND DETAILS ARE VERIFIED WITH CERTIFIED OR APPROVED EQUIPMENT DRAWINGS.

14. BEFORE PLACING CONCRETE, REFER TO OTHER TRADE DRAWINGS AND COORDINATE THE LOCATION AND SIZE OF ITEMS SUCH AS OPENINGS, EQUIPMENT PADS, PIPING, CONDUIT, DRAINS, DEPRESSED FLOORS, DOOR HOLDDOWNS IN GRADE WALLS, EMBEDDED ITEMS, ETC.

15. FOUNDATIONS SHALL BEAR ON UNDISTURBED VIRGIN SOIL, FREE OF VEGETATION AND ORGANIC MATERIALS, WITH A MINIMUM ALLOWABLE BEARING CAPACITY OF 2500 PSF. REFER TO GEOTECHNICAL INVESTIGATION WHEN AVAILABLE.

16. THE CONTRACTOR SHALL RETAIN THE SERVICES OF A GEOTECHNICAL ENGINEER, REGISTERED IN THE STATE OF MICHIGAN, TO VERIFY PERMISSIBLE BEARING CAPACITY VALUES. SUBMIT A REPORT OF THE SOIL CONDITIONS AND CAPACITIES ENCOUNTERED TO THE ENGINEER FOR RECORD.

17. DRILL-IN ANCHOR BOLTS SHALL BE HVA ADHESIVE ANCHORING SYSTEM AS MANUFACTURED BY HILTI. ANCHOR BOLTS SHALL BE 304 STAINLESS STEEL.

18. NON-SHRINK GROUT SHALL BE SURE GRIP HIGH PERFORMANCE GROUT OR APPROVED EQUAL AS MANUFACTURED BY DAYTON SUPERIOR CORPORATION.

19. CONCRETE CONSTRUCTION SHALL INCLUDE PROVISION FOR COLD WEATHER CONCRETING. REQUIREMENTS FOR COLD WEATHER CONCRETING SHALL CONFORM TO ACI 306.1, "STANDARD SPECIFICATION COLD WEATHER CONCRETING."

CONCRETE SHALL ATTAIN A MINIMUM STRENGTH OF 2600 PSI BEFORE FORMS ARE REMOVED.

20. STRUCTURE BACKFILL SHALL BE GRANULAR MATERIAL CLASS II AS SPECIFIED IN THE 2003 MDOT STANDARD SPECIFICATIONS FOR CONSTRUCTION. PLACE BACKFILL IN LAYERS, NOT MORE THAN 6 INCHES IN DEPTH, AND COMPACTED TO NOT LESS THAN 95 PERCENT OF THE MAXIMUM UNIT WEIGHT. PLACE BACKFILL ALTERNATING EACH FACE OF WALLS TO BALANCE PRESSURE TO WALLS.

21. CONCRETE FORMS SHALL REMAIN IN PLACE A MIN. OF 48 HOURS OR UNTIL THE CONCRETE HAS ATTAINED 75 PERCENT OF ITS DESIGN STRENGTH.

22. CONCRETE SHALL ATTAIN IT'S 28 DAY DESIGN STRENGTH BEFORE COMMENCING WITH BACK FILLING OPERATIONS.

23. PROVIDE ISOLATION JOINT MATERIAL BETWEEN EXISTING AND NEW CONCRETE AT SAWCUT IN FLOOR SLAB.

24. PLACE TWO ADDITIONAL #5 BARS AROUND ALL OPENINGS LARGER THAN 1 FOOT SQUARE OR DIAMETER. EXTEND BARS A MINIMUM 24 INCHES BEYOND OPENINGS, UNLESS OTHERWISE NOTED.

DIVISION 4 - MASONRY

1. MORTAR SHALL BE TYPE M OR S AND CONFORM TO ASTM C270 AND NCMA TEK NOTES 9-1 OR 9-2. NET AREA COMPRESSIVE STRENGTH OF MASONRY (f'm) = 1500 PSI (MIN.)

2. MASONRY GROUT SHALL CONFORM TO ASTM C 476 WITH PEA GRAVEL AGGREGATE AND A MINIMUM STRENGTH OF 2000 PSI.

3. UNLESS OTHERWISE NOTED, PROVIDE HORIZONTAL WIRE TYPE REINFORCING WITH 9 GAUGE SIDE AND CROSS MEMBERS IN EVERY SECOND COURSE (16" O.C.), IN ALL MASONRY WALLS.

4. REINFORCING BARS, DOWELS AND TIES SHALL CONFORM TO ASTM A615, GRADE 60.

5. ALL MASONRY BELOW GRADE SHALL BE GROUTED SOLID.

6. UNLESS OTHERWISE NOTED, REINFORCE BOND BEAMS WITH 2-#5 BARS. REFER TO ARCHITECTURAL DRAWING FOR WALL SECTIONS.

7. PROVIDE UNIT COST TO TUCKPOINT EXTERIOR MASONRY. QUANITITIES TO BE VERIFIED DURING CONSTRUCTION. CUT OUT EXIST. JOINTS, AS IDENTIFIED IN THE FIELD, AND REMOVE BY MEANS OF A TOOTH CHISEL OR SPECIAL POINTER'S GRINDER TO A UNIFORM DEPTH OF 3/4" OR UNTIL SOUND MORTAR IS REACH. TIGHTLY PACK NEW MORTAR IN 1/4" THICK LAYERS MAX. ALLOW LAYER TO BECOME "THUMBPRINT HARD" BEFORE ADDING ANOTHER LAYER. PACK THE FINAL LAYER FLUSH WITH SURFACE OF MASONRY UNITS AND TOOL TO MATCH EXIST. WALL WHEN THE MORAR IS "THUMBPRINT HARD."

8. CONCRETE MASONRY SHALL CONFORM TO ASTM C90, MEDIUM WEIGHT WITH NET AREA COMPRESSIVE STRENGTH OF CONCRETE MASONRY UNITS = 1900 PSI (MIN.)

9. PATCH EXISTING BRICK AS REQUIRED FROM SIGNAGE REMOVAL WITH BRICK TO MATCH EXIST. PROVIDE SAMPLES TO THE ARCHIECT FOR REVIEW AND APPROVAL.

7. STEEL ELEVATIONS SHALL BE AS INDICATED ON PLANS AND DETAILS.

8. PRIOR TO FABRICATION THE FABRICATOR SHALL SUBMIT SHOP DRAWINGS TO THE ENGINEER FOR REVIEW. SHOP DRAWINGS SHALL CONSIST OF TWO SETS OF BLACKLINE DRAWINGS (MIN).

9. TIGHTEN ASTM A325 BOLTS TO THE PROPER FASTENER TENSION AS SPECIFIED IN THE SPECIFICATION FOR STRUCTURAL JOINTS. USE ONE HARDENED WASHER UNDER THE TURNED ELEMENT. THE USE OF "SNUG TIGHT" BOLTS IS NOT PERMITTED.

10. SHOP AND FIELD WELDS SHALL BE MADE BY APPROVED CERTIFIED WELDERS. PERFORM ALL WELDING BY THE ELECTRIC ARC METHOD IN ACCORDANCE WITH THE AWS STRUCTURAL WELDING CODE D1.1 (LATEST)

11. PERFORM WELDING WITH SPECIFIED ELECTRODES AND QUALIFIED WELDERS, WELDING OPERATORS, AND TACKERS AS APPROPRIATE, PER SPECIFIED REFERENCE STANDARDS. PROVIDE NECESSARY JIGS AND HOLDING DEVICES FOR SHOP WELDING. CONTROL WELDING SEQUENCE TO MINIMIZE RESIDUAL STRESSES AND MEMBER DISTORTION.

12. MAKE FIELD CONNECTIONS WITH 3/4 INCH DIAMETER ASTM A325N BEARING TYPE BOLTS (WITH THREADS ASSUMED IN THE SHEAR PLANE) UNLESS OTHERWISE NOTED.

13. CONNECTIONS SHALL BE A MINIMUM OF TWO 3/4 INCH DIAMETER ASTM A325 BOLTS OR A WELD DEVELOPING A MINIMUM OF 10 KIPS.

14. SUBMIT DRAWINGS AND CALCULATIONS OF TYPICAL CONNECTION DETAILS FOR THE APPROVAL PRIOR TO PROCEEDING WITH DETAILING.

15. PROVIDE ADEQUATE LATERAL BRACING AND VERTICAL SUPPORT FOR THE SAFE ERECTION AND ALIGNMENT OF THE STRUCTURAL STEEL.

16. FURNISH MEMBERS OF PROPER LENGTH AND ASSEMBLE WITHOUT EXCESSIVE USE OF FILLERS. JOIN AND ASSEMBLE MEMBERS WITHOUT SHARP PROJECTIONS, SERRATED EDGES, SHARP EDGES OR SHARP CORNERS AT JOINTS. COPE, BLOCK, MITER AND GRIND EDGES WITH CARE. FURNISH MEMBERS FREE FROM TWISTS, BENDS, DISTORTIONS AND OPEN JOINTS. MARK PIECES WITH THE SAME IDENTIFYING NUMBER OR SYMBOL AS USED TO IDENTIFY PIECES ON THE SHOP DRAWINGS.

17. GROUT PADS SHALL HAVE A MINIMUM COMPRESSIVE STRENGTH OF 4000 PSI IN SEVEN DAYS.

18. ANCHOR BOLTS AND SETTING PLANS SHALL BE FURNISHED BY THE STRUCTURAL STEEL FABRICATOR AND SET BY THE FOUNDATION CONTRACTOR.

19. THE CONTRACTOR SHALL RETAIN THE SERVICES OF AN AWS CERTIFIED WELDING INSPECTOR TO PERFORM INSPECTION OF FIELD WELDED AND BOLTED CONNECTIONS. ALL FIELD WELDED CONNECTIONS SHALL BE VISUALLY INSPECTED.

20. ELEVATIONS ARE REFERENCED FROM FINISH FLOOR ELEVATION = 100'-0". ACTUAL FINISH FLOOR ELEVATION 936.19 = 100'-0".

21. COUPLER NUTS MAY BE PROVIDED AT ANCHOR BOLTS SO THAT ANCHOR BOLTS CAN BE INSTALLED IN TWO PIECES TO MAXIMIZE VERTICAL CLEARANCE FOR COLUMN ERECTION.

22. THE USE OF A GAS-CUTTING TORCH IN THE FIELD FOR CUTTING HOLES OR FOR CORRECTING FABRICATION ERRORS WILL NOT BE PERMITTED ON STRUCTURAL FRAMING MEMBERS EXCEPT WITH THE WRITTEN APPROVAL OF THE ENGINEER FOR EACH SPECIFIC CONDITION.

23. ALL STRUCTURAL STEEL SHALL BE SHOP PAINTED WITH AN APPROVED CORROSION RESISTANT PRIMER SUCH AS "TNEMEC PRIMER 10-99" OR APPROVED EQUIVALENT. ALL STEEL SHALL BE PAINTED IN STRICT ACCORDANCE WITH THE AISC SPECIFICATIONS AND MANUFACTURER'S RECOMMENDATIONS. PRIOR TO PAINTING, ALL STEEL SURFACES SHALL BE PREPARED IN ACCORDANCE WITH SSPC-SP3. REMOVE LOOSE RUST, LOOSE MILL SCALE AND SPLATTER SLAG OR FLUX DEPOSITS. ALL PAINTS SHALL BE APPROVED BY THE ENGINEER PRIOR TO THEIR USE.

24. SHOP PRIME AND PAINT STRUCTURAL STEEL. FIELD TOUCH-UP FINISH COAT AFTER ERECTION.

25. AN INDEPENDENT INSPECTION AGENCY SHALL BE EMPLOYED BY THE CONTRACTOR AND APPROVED BY THE ENGINEER TO INSPECT THE STRUCTURAL STEEL IN THE FIELD AND VERIFY THAT IT CONFORMS TO THE REQUIREMENTS OF THE CONTRACT DOCUMENTS.

26. RUNWAY BEAMS AND BRIDGE BEAM SHALL MEET OR EXCEED THE REQUIREMENTS FOR ARCHITECTURALLY EXPOSED STRUCTURAL STEEL. ADDITIONALLY, THE RUNWAY BEAMS SHALL BE ERECTED SUFFICIENTLY SQUARE, PARALLEL AND LEVEL TO PERMIT TRAVERSING OF THE BRIDGE BEAM WITHOUT BINDING OF THE END TRUCK WHEELS OR FRAME ALONG THE RUNWAY LENGTH. THE CONTRACTOR SHALL TEST THE CRANE THROUGH ITS FULL RANGE OF TRAVEL UNDER MAXIMUM LOAD.

27. PROVIDE HOLES IN THE BEAM TOP FLANGE AS REQUIRED TO MOUNT THE BEAM TO THE END TRUCKS.

DIVISION 6 - CARPENTRY


2. PRINCIPAL ITEMS OF WOOD FRAMING INCLUDING BLOCKING AND NAILERS SHALL BE KILN-DRIED SPRUCE-PINE-FIR, NO.2 GRADE OR BETTER. NAILERS AND BLOCKING ARE TO BE FASTENED BY PNEUMATIC OR POWER ACTUATED FASTENERS.

3. NAILER PLATES SHALL BE TREATED WITH LIGHTGREEN CCA PRESERVATIVE.

7. REFER TO ARCHITECTURAL DRAWING FOR PLAN DIMENSIONS OF WALLS, SECTIONS, BUILDING ELEVATIONS AND BUILDING CROSS SECTIONS.

13. 2x SILL NAILERS SHALL BE CONNECTED TO MASONRY WALLS WITH SIMPSON MAB23 MUDSILL ANCHORS AT A MAXIMUM SPACING OF 32 INCHES ON CENTER.

17. SAWN LUMBER SHALL BE SOUTHERN PINE NO. 2 OR BETTER. OTHER WOOD SPECIES THAT PERMIT HIGHER ALLOWABLE STRESSES CAN BE USED.

19. WOOD CONSTRUCTION SHALL COMPLY WITH AITC "TIMBER CONSTRUCTION MANUAL" (5TH EDITION), AND AF&PA "NATIONAL DESIGN SPECIFICATION FOR WOOD CONSTRUCTION" (2205).

20. ALL LUMBER SHALL BE PRESERVATIVE TREATED "WOLMANIZED" OR EQUAL.

23. ALL FRAMING SHALL BE PLUMB AND TRUE TO LINE AND LEVEL.

LIGHT GAGE METAL FRAMING1. COMPLY WITH THE APPLICABLE REQUIREMENTS OF THE MICHIGAN BUILDING CODE AND THE AMERICAN IRON AND STEEL INSTITUTE, SPECIFICATIONS FOR THE DESIGN OF COLD-FORMED STEEL STRUCTURAL MEMBERS AND THE CENTER FOR COLD-FORMED STEEL STRUCTURES TECHNICAL BULLETIN, VOL. 2 NO. 1,1996; AISI SPECIFICATION PROVISIONS FOR SCREW CONNECTIONS.

2. COLD FORMED STEEL FRAMING SHOWN ON CONTRACT DRAWINGS ARE BASED ON STEEL CONTRACTOR MUST SUBMIT ENGINEERED PRODUCT INFORMATION SHOWING THAT MANUFACTURER'S SUPPLIED MEMBERS PROVIDE EQUIVALENT STRENGTH AND STIFFNESS.

3. INSTALLING CONTRACTOR SHALL SUBMIT SEALED CALCULATIONS AND SHOP DRAWINGS INDICATING CAPACITY OF MEMBER, FRAMING DETAILS, CONNECTIONS, BRACING, BRIDGING AND ALL OTHER ACCESSORIES CONFORMING TO DESIGN CRITERIA. CALCULATIONS AND SHOP DRAWINGS SHALL BE PREPARED BY AN ENGINEER EXPERIENCED IN THE DESIGN OF LIGHT GAGE CONSTRUCTION AND LICENSED IN THE STATE OF MICHIGAN.

4. COLD-FORMED METAL FRAMING SHALL BE OF THE SIZE, GAGE AND SECTION PROPERTIES AS REQUIRED FOR THE SPECIFIC LOADING CONDITION AND CONFORM TO ASTM A653. ALL METAL FRAMING 16 GAGE AND HEAVIER SHALL HAVE A MINIMUM YIELD STRENGTH OF 50 KSI. ALL METAL FRAMING 18 GAGE AND LIGHTER SHALL HAVE A MINIMUM YIELD STRENGTH OF 33 KSI. ALL FRAMING SHALL BE HOT-DIPPED GALVANIZED (G-60) IN ACCORDANCE WITH ASTM A924.

5. WELDING OF LIGHT GAGE METAL FRAMING SHALL NOT BE PERMITTED.

6. ALL METAL FRAMING SHALL BE SAW CUT, SQUARE AND TRUE. CUTTING OF METAL FRAMING WITH A TORCH WILL NOT BE PERMITTED.

7. NO SPLICES WILL BE PERMITTED IN ANY FRAMING UNLESS SHOWN OR NOTED ON THE DRAWINGS.

8. METAL FRAMING FOR EXTERIOR WALL APPLICATIONS SHALL BE 18 GAGE MINIMUM.

9. CONNECTIONS FOR LIGHT GAGE FRAMING SHALL BE AS MANUFACTURED BY THE STEEL NETWORK, INC. OR APPROVED SUBSTITUTE.

10. RAP TIES SHALL BE "FERO" SLOTTED SIDE MOUNTING RAP-TIE WITH INSULATION SUPPORT OR APPROVED EQUAL.

DIVISION 8 -

1. EXTERIOR HOLLOW METAL DOORS: 14 GAUGE (MIN.) STEEL WITH ZINC COATING AND FACTORY BACKED-ON PRIMER. URETHANE CORE INSULATION BONDED TO STEEL PANELS. MANUFACTURER SHALL BE MEMBER OF STEEL DOOR INSTITUTE, STEELCRAFT OR EQUAL.

2. HOLLOW METAL DOOR FRAMES: 16 GAUGE (MIN.) STEEL WITH ZINC COATING AND FACTORY BAKED-ON PRIMER. MANUFACTURER SHALL BE MEMBER OF STEEL DOOR INSTITUTE.

3. COORDINATE DOORS WITH FINISHED HARDWARE.

4. ALL LOCKS SHALL BE MASTER KEYED AND KEYED ALIKE, AS DIRECTED BY OWNER AND ARCHITECT. COORDINATE WITH EXISTING KEY SYSYTEM.

5. FINISH HARDWARE. COORDINATE WITH DOORS AND FRAMES. KEYING WITH OWNERS APPROVAL. PROVIDE ALL HARDWARE APPROVED MANUFACTURERS AS FOLLOWS (OR APPROVED EQUAL):

6. EXTERIOR GLAZING, 1" INSULATED GLASS TO MATCH EXISTING EXTERIOR GLASS.

7. INTERIOR GLAZING (NON RATED) 1/4" CLEAR TEMPERED FLOAT GLASS.

8. INTERIOR WOOD DOORS: 1-3/4" INCHES THICK, SOLID CORE CONSTRUCTION, OAK VENEER PLAIN SLICED W/ PAIR MATCHED GRAIN, PRE-FINISHED STAINED TO MATCH EXISTING WOOD DOOR STAIN. APPROVED MANUFACTURERS AS FOLLOWS (OR APPROVED EQUAL):ALGOMA HARDWOODS, MARSHFIELD DOOR SYSTEMS, MOHAWK

9. DOOR HARDWARE:A. CONTRACTOR SHALL VERIFY ALL EXISTING FIELD CONDITIONS AND NOTIFY ARCHITECT IMMEDIATELY IF THAT

WHICH EXISTS DIFFERS FROM THAT WHICH IS SHOWN ON DRAWINGS.B. ALL WORK TO COMPLY WITH CURRENT FEDERAL, STATE AND LOCAL CODES, LAWS AND ORDINANCES.

THE REQUIREMENTS OF ICC/ANSI A117.1 AND THE AMERICANS WITH DISABILITIES ACT (ADA) ARE TO BE FULLY SATISFIED. ALL WORK SHALL MEET THE MOST STRINGENT REQUIREMENTS OF BOTH INCLUDING, BUT NOT LIMITED TO CLEARANCES, LIMITATIONS, ACCESSORIES, ETC.

C. THESE DRAWINGS ARE PREPARED IN ACCORDANCE WITH THE LIMITED SERVICES FOR WHICH THE ARCHITECT WAS CONTRACTED. THE ARCHITECT MAKES NO REPRESENTATION THAT THE INTERPRETATION OF THESE DOCUMENTS WILL RESULT IN COMPLETE COMPLIANCE WITH THE ADA.

D. ALL DOORS REQUIRED TO BE LABELED SHALL BE SET IN LABELED FRAMES AND IDENTIFIED WITH UL LABEL AND BE PROVIDED WITH APPROVED SELF-CLOSING DEVICES AND POSITIVE LATCHING HARDWARE.

E. ALL DESIGNATED EXIT DOORS SHALL BE EQUIPPED WITH THE REQUIRED EGRESS HARDWARE.F. FURNISH HARDWARE AS SCHEDULED WITHOUT SUBSTITUTION, NO ALTERNATES WILL BE APPROVED.G. FURNISH A KEYED CYLINDER AND TWO CUT KEYS FOR EACH LOCKING DEVICE SPECIFIED; KEYED TO THE

OWNERS EXISTING MASTER SYSTEM. INCLUDE KEY CONFERENCE AND KEY SYSTEM SCHEDULE. H. FURNISH AND PROVIDE ALL NECESSARY REINFORCEMENTS, BRACKETS, FASTENERS, SPACERS AND FILLERS

TO PROVIDE A COMPLETE FUNCTIONING OPENING.I. PROVIDE COMPLETE SHOP DRAWINGS, SUBMITTALS AND CUT SHEETS COMPLYING WITH DHI PRESCRIBED

METHODS AND VERTICAL FORMAT DOUBLE SPACED HARDWARE SCHEDULE.J. HARDWARE SETS:

1. Opening 119A -6’0” x 7’0” HMD x HMFHardware Set 1 –Rim Panics w/ Pull Trim [Lock / Unlock] + Closer Stops

2 ea. Continuous Hinge CH51 32D PBB1 ea. Rim Panic Device 6201R (CD) (01) 32D PDQ1 ea Rim Panic Device 6201R (CD) (03) 32D PDQ1 ea. Keyed Mullion 9200M-11 (paint to match surrounding) USP PDQ2 ea. Combinated Rim Cylinder (03) (KM) 26D Match Existing2 ea. Combinated Mortise Cylinder (CD) 26D Match Existing2 ea. Pull 658A x A Mount 32D Hiawatha2 ea. Closer 7101 BC SCS (push side mount) AL PDQ1 ea. Threshold S205 (notch & cope as required) AL Reese2 ea. Sweep 354 –Mount pull side AL Reese1 set Weatherstrip 855C AL Reese1 set Mullion Seal 628 Blk1 ea. Rain Drip 201C AL Reese

2. Openings 114A & 118A -3’0” x 7’0” WD x HMFHardware Set 2 –Classroom Lock [Lock / Unlock] + Closer

3 ea. Butt Hinges 35STBB 4545 NRP 26D1 ea. Classroom Lock MR 148 PJEW 32D PDQ1 ea. Combinated Mortise Cylinder 26D Match Existing1 ea. Closer 7101 BC EDA (push side mount) AL PDQ1 ea. Wall stop 115 26D PDQ 1 ea. Kickplate 98 10 x 2” LDW 32D PDQ

3. Opening 133 -Non-Rated 3’0” x 7’0” WD x HMFHardware Set 3 –Rim Panic w/ Classroom Trim [Lock / Unlock] + Closer and Hold-Open

3 ea. Butt Hinges 35STBB 4545 NRP 26D PDQ1 ea. Rim Panic 6201R x 6EW 08 PHL Classroom Trim 32D PDQ2 ea. Combinated Mortise Cylinder 26D Match Existing 1 ea. Closer 7101BC PA EDA (Push Side Mount 180°) AL PDQ1 ea. Wall Stop and Hold-Open 119 26D PDQ1 ea. Kickplate 98 10 x 2” LDW 32D PDQ

4. Opening 108 -Non-Rated Pr 6’0” x 7’0” WD x HMFHardware Set 4 –Flushbolts x Storeroom Lock [Always Locked]

6 ea. Butt Hinge 35STBB 4545 NRP 26D PDQ 1 set Flushbolts 93270 x 93270 x 909 Dust Proof Strike 26D PDQ1 ea. Storeroom Lock MR 115 PJEW 32D PDQ1 ea. Combinated Mortise Cylinder 26D Match Existing1 ea. Wall stop 115 (door to adjacent wall) 26D PDQ 1 ea. Overhead Stop OH4903S 32D Hiawatha

DIVISION 7


2. MEMBRANE ROOFING SHALL BE 20 YEAR 60 MIL. FULLY ADHERED EPDM WARRANTY SHALL INCLUDE MEMBRANE, NEW INSULATION, ACCESSORIES AND METAL, NO DOLLAR LIMITATION AND COVERAGE FOR ANY LEAK IN ROOF SYSTEM, MANUFACTURING DEFECTS, AND WORKMANSHIP. APPROVED MANUFACTURERS AS FOLLOWS (OR APPROVED EQUAL):

FIRESTONECARLISLE

DURO-LAST ROOFINGPROVIDE ALL REQUIRED ADHESIVES, FLASHINGS, AND ACCESSORIES AS REQUIRED FOR A COMPLETE INSTALLATION PER MANUFACTURERS DETAILS AND RECOMMENDATIONS.

3. CAULK DOOR AND WINDOW FRAMES AT MASONRY WALLS. CAULK COMPOUND SHALL BE AN ELASTIC, WATERPROOF ADHESIVE FROM AN APPROVED MANU- FACTURER. COLOR SELECTION BY ARCHITECT.

4. ROOF CURB SHALL BE PRE-FAB CURBS USING MIN. 18 GA. GALVANIZED STEEL, WITH FULLY MITERED AND WELDED CORNERS. CURBS TO BE INSULATED WITH 11/2" RIDID INSULATION AND FACTORY INSTALLED WOOD NAILERS. HEIGHT TO BE 24 INCHES ABOVE ROOF AS DETAILS, CURB SHALL BE LEVEL AT THE TOP.

5. ALUMINUM AWNING - BASIS OF DESIGN IS PANORAMA MODEL BY GENERAL AWNINGS OR EQUAL. COLOR TO BE SELECTED BY OWNER FROM MANUFACTURERS FULL RANGE OR COLORS.

DIVISION 9 - FINISHES

1. SEALANTS:COLOR: MATCH ADAJACENT MATERIAL

2. EXTERNAL METAL:APPROVED MANUFACTURE AS FOLLOWS (OR APPROVED EQUAL):

PAC CLADPERMA SNAP COPING: W.P. HICKMAN CO.SNAP-LOK COPING: MM SYSTEMS CORP.COLOR: BY ARCHITECT / OWNER

3. GYPSUM BOARD SHALL BE 5/8" THICK MANUFACTURED BY UNITED STATES GYPSUM COMPANY OR EQUAL. USE WATER RESISTANT GREEN BOARD IN TOILET ROOMS. USE 5/8" TYPE "X" FIRECODE BOARD AT ALL OTHER LOCATIONS.

4. PAINT FINISHES SHALL BE APPLIED IN ACCORDANCE WITH MANUFACTURER'S SPECIFICATIONS. APPROVED MANUFACTURER'S:

SHERWIN WILLIAMSBENJAMIN MOORE GLIDDEN PITTSBURGH PAINTS PRATT & LAMBERT

5. ACOUSTICAL CEILING CEILING:APPROVED MANUFACTURE AS FOLLOWS (OR APPROVED EQUAL):

ARMSTRONG, 24"x24" OR 24"X48" ULTIMA TEGULAR W/ PRELUDE XL 15/16" EXPOSED T GRID

6. LUXURY VINYL 1 (LV-1) IINSTALL ALL VINYL FLOORING PER THE MANUFACTURERS RECOMMENDED DETAILSAPPROVED MANUFACTURER AS FOLLOWS:HARVEST MOON BY XL FLOORING OR EQUAL. COLOR TO BE SELECTED BY OWNER.

7. LUXURY VINYL 2 (LV-2) INSTALL ALL VINYL FLOORING PER THE MANUFACTURERS RECOMMENDED DETAILSAPPROVED MANUFACTURER AS FOLLOWS:GERFLOR - TARAFLEX POLYVALENT - TARAFLEX MULIT-USE 6.2 - COLOR TO BE SELECTED BY THE OWNER.

8. CARPET (CPT)INSTALL ALL CARPET FLOORING PER THE MANUFACTURERS RECOMMENDED DETAILSALL CARPET ARES TO BE 24" X 24" QUARTER TURN PATTERN. PROVIDE $4.00 PER S.F. ALLOWANCE FOR CARPET MATERIAL. SPECIFIC CARPET MATERIAL TO BE SELECTED BYOWNER AT A LATER DATE.

9. GYM FLOOR REFINISHING: SAND PORTIONS OF EXIST. GYM FLOOR TO BE REFINISHED WITH A MINIMUM OF THREE CUTS, A COURSE GRIT CUT, MEDIUM GRIT CUT, AND A FINE GRIT CUT. VERIFY FINISH OF FLOOR PRIOR TO COMMENCING WORK AND PROVIDE ADDITIONAL CUTS AS REQUIRED TO STRIP EXISTING FINISH. VACCUM AND TACK THE ENTIRE FLOOR BETWEEN EACH CUT. APPLY COATINGS PER MANUFACTURERS RECOMMENDATIONS. STAIN THE FLOOR WITH TWO DIFFERENT COLORS AS INDICATED ON THE PLANS, COLORS TO BE SELECTED BY THE OWNER FROM MANUFACTURERS FULL RANGE OF STAIN COLORS. THE FLOOR SEAL AND FINISH SHALL BE MFMA APPROVED OIL PRODUCTS. THE STRIPING PAINT SHALL BE RECOMMENDED BY THE FINISH MANUFACTURER, COLOR TO BE SELECTED BY OWNER FROM MANUFACTURER'S FULL RANGE OF COLORS.

10. SOLID SURFACEINSTALL SOLID SURFACE COUTNERS & TRIM PER THE MANUFACTURERS RECOMMENDED DETAILSAPPROVED MANUFACTURER AS FOLLOWS:

WILSONARTCOLOR: WHITE STONE 9208CS

11. PLASTIC LAMINATE (PL-1)INSTALL PLASTIC LAMINATE CASEWORK PER THE MANUFACTURERS RECOMMENDED DETAILSAPPROVED MANUFACTURER AS FOLLOWS:

WILSONARTCOLOR: PHANTOM COCOA 8213K-28

12. CASEWORK/CABINETRY MATERIALS: PARTICAL BOARD CORE MATERIAL SHALL BE OF A MINIMUM 45 LB. DENSITY, M-2 INDUSTRIAL GRADE. MEDIUM DENSITY FIBERBOARD (MDF) SHALL BE USED IN HIGH STRESS REAS AS DRAWER MEMBERS AND SHALL BE A MINIMUM OF 48 LB. DENSITY MD-21 GRADE. INDUSTRIAL HARDBOARD SHALL BE PRE-FINISHED 1/4" THICKNESS COMPOSED OF WOOD FIBERS, PHENOLIC RESIN BINDERS AND MOISTURE INHIBITORS THAT MEET OR EXCEED ANSI/AHA A135.4 1988. ALL COUNTERTOPS LOCATED WITHIN 3'-0" OF ANY DIRECTION OF BUILT-IN SINK AND OR BUBBLERS SHALL BE CONSTRUCTED OF MARINE GRADE "GREENBOARD" MR MOISTURE/WATER RESISTANT PARTICLE BOARD.

13. CASEWORK/CABINETRY HARDWARE: PROVIDE INSTITUTIONAL FIVE-KNUCKLE HINGES ON ALL DOORS. PROVIDE HEAVY DUTY SPRING-LOADED DOOR CATCHES ON ALL DOORS. PROVIDE CATCH STRIKE PLATES. PROVIDE 4" WIRE PULLS. PROVIDE DOOR SLIDES CAPABLE OF SUPPORTING A 100 LB. LOAD RATING WITH 3" SELF CLOSE FEATURE AND SIDE ADJUSTMENT. PROVIDE ADJUSTABLE SHELF SUPPORT CLIPS FOR 1" THICK ADJUSTABLE SHELVES CAPABLE OF SUPPORTING AT 200 LB. LOAD RATING. PROVIDE ANY AND ALL OTHER HARDWARE REQUIRED FOR CABINET FUNCTION AS INDICATED ON THE DRAWINGS.

14. VINYL COMPOSITE TILE (VCT-1)INSTALL ALL VCT FLOORING PER THE MANUFACTURERS RECOMMENDED DETAILSAPPROVED MANUFACTURER AS FOLLOWS:

ARMSTRONG, STANDARD EXCELON - IMPERIAL TEXTURE, THRU-CHIP FLOOR TILE.COLOR: TO BE SELECTED BY OWNER FROM MANUFACTURERS FULL RANGE OF COLORS.

DIVISION 10 - SPECIALTIES

1. FIRE EXTINGUISHERS AND CABINETS SHALL BE LOCATED AS REQUIRED. PROVIDE SEMI-RECESSED CABINETS IN OFFICE AREA AND SURFACE MOUNTING BRACKETS IN SHOP AREA. J.L. INDUSTRIES, COSMIC "E", 10 LB. DRY CHEMICAL EXTINGUISHERS, "CLEAR-VU" MODEL 1000 ALUMINUM CABINETS.

2. PIN-MOUNTED BUILDING SIGNAGEPROVIDE FLUSH MOUNT ON WALL FACE (MOUNTING FM-4) CAST ALUMINUM LETTERS IN THE SIZE AND CONFIGURATION INDICATED ON THE DRAWINGS. LETTERS BY A.R.K. Ramos or equal .

3. PIN-MOUNTED BUILDING GRAPHIC SIGNAGE/PLAQUE FOR SHELBY TOWNSHIP LOGOPROVIDE FLUSH MOUNT ON WALL FACE (MOUNTING FM-4). METAL GRAPHICS AS INDICATED ON DRAWINGS. GRAPHIC SHALL BE CAST BRONZE SCULPTED BAS RELIEF PLAQUE BY A.R.K. Ramos or equal.

DIVISION 5 - METALS

STRUCTURAL AND MISC. STEEL1. DESIGN, DETAILING, FABRICATION, AND ERECTION OF STRUCTURAL STEEL SHALL CONFORM TO THE FOLLOWING

PUBLICATIONS EXCEPT AS SPECIFICALLY INDICATED IN THE CONTRACT DOCUMENTS:

A· AMERICAN INSTITUTE OF STEEL CONSTRUCTION (AISC) MANUAL OF STEEL CONSTRUCTION (9TH EDITION) INCLUDING:

a. AISC SPECIFICATION FOR STRUCTURAL STEEL BUILDINGS - ALLOWABLE STRESS DESIGN

b. AISC CODE OF STANDARD PRACTICE

c. SPECIFICATION FOR STRUCTURAL JOINTS USING ASTM A325 OR A490 BOLTS (RESEARCH COUNCIL ON STRUCTURAL CONNECTIONS NOV. 13, 1985)

d. AISC DETAILING FOR STEEL CONSTRUCTION (1983)

e. AISC ENGINEERING FOR STEEL CONSTRUCTION (1984)

f. AMERICAN WELDING SOCIETY STRUCTURAL WELDING CODE (D1.1, LATEST EDITION)

g. STEEL JOIST INSTITUTE STANDARD SPECIFICATIONS FOR STEEL JOIST (LATEST EDITION)

2. WIDE FLANGE SHAPES SHALL BE ASTM A992, Fy = 50,000 PSI.

3. CHANNEL, ANGLE AND PLATE SHALL BE ASTM A36, Fy = 36,000 PSI.

4. HSS STEEL SHALL BE ASTM A500, GRADE B, Fy = 46,000 PSI.

5. HEADED STUDS SHALL BE NELSON "FLUXED SHEAR CONNECTOR STUDS" OR APPROVED SUBSTITUTE.

6. ANCHOR BOLTS SHALL BE ASTM F1554, GRADE 36, Fy = 36,000 PSI.



03/11/2019 ADDENDUM 1

UP

10

1

2

4

6

5

5

55

55

5

5

555

5

5

5

5

5

5

6

6

6

66

6

6

6

6

5

5 5

7

OPEN OFFICE

104

OFFICE

154

RECEPTION

152

STOR.

106

TOILET

153

CORRIDOR

113

MENS

150

WOMENS

151

VESTIBULE

101

OFFICE

155

OFFICE

156

ROOM 5

137

ROOM 4

138 ROOM 3

139

ROOM 2

140

ROOM 1

141

ROOM 6

133

ROOM 7

129

GYM

109

STOR.

108

OFFICE

110

MALE LOCKERS

118

MALE SHOWER

117LAUNDRY

116

FEMALE SHOWER

115

MENS RESTROOM

111

WOMENS

RESTROOM

112

FEMALE

LOCKERS

114

SOUVINEERS

121

STOR.

122

MECH. / ELEC.

123

LAWN EQUIP.

124

STOR.

126JAN.

127

STOR.

131

OFFICE

130

OFFICE

132

STOR.

134

STOR.

135

KITCHEN

148

STOR.

149

BREAK

105

LOBBY

102

EXERCISE ROOM

107

VESTIBULE

119OFFICE

120

STORAGE

125

CORRIDOR

136

6

9

3' - 0"

25

' -

2"

8' -

4"

7' -

4"

25' - 7"

22' - 7"

2' -

10

1/2

"

39' - 4"

10

' - 1

0 1

/2"

12' - 0" 9' - 4" 9' - 8"

9' -

9 1

/2"

15' - 4"

13

' -

4"

34' - 0 1/2"2' - 8"

20

' -

5 1

/2"

26' - 0"29' - 11"

20

' -

5 1

/2"

28' - 7"

21' - 2"

7' -

6"

17

' -

5"

4' -

5"

29

' -

4"

21

' -

4"

5' -

5"

30

' -

1"

3' -

4"

18' - 5" 8' - 0"5' - 10"8' - 0"

5' -

11

"1

4' -

11

"1

4' -

6"

6' - 6 1/2"

25

' -

2"

17

' -

2"

26

' -

4"

12' - 6"

49' - 8"

68

' -

0"

9' - 2" 3' - 4"

6' -

0"

10' - 4"

8' -

0"

14' - 8" 12' - 0" 11' - 8"10' - 0"

8' -

0"

ROOM 8

128

REMOVE SIGNAGE ON EXIST. WALL

A412

3

3

11

12

0"

4' - 8"

4

13

+/- 21' - 8" +/- 26' - 4"

6

6

8

EXIST. STOOP

8

8

14

14

SEE SHEET A401 FOR EXTENTS OF REMOVAL & REPLACEMENT OF GYM FLOORING

DEMOLITION LEGENDNEW METAL STUD WALL

NEW DOOR

EXISTING WALL

EXISTING DOOR TO REMAIN

EXISTING WALL TO BE DEMOLISHED

EXISTING DOOR TO BE DEMOLISHED

REMOVE REMNANTS OF CARPET GLUE / BACKING & VINYL BASE & PREPARE SLAB & WALL FOR NEW FINISHES

DEMOLISH ALL LAYERS OF VINYL TILE FLOORING & VINYL BASE & PREPARE FLOORING & WALL TO RECEIVE NEW FINISHES

EXIST. ASPHALT TO BE REMOVED & REPLACED TO POSITIVE DRAINAGE AND ADA ACCESS

EXISTING DOUBLE DOOR TO BE DEMOLISHED

1 DEMOLISH EXIST. CMU WALL - TOOTH-IN NEW FACE SHELLSAT LOCATIONS TO PATCH EXIST. WALLS TO REMAIN WHERE THEY INTERSECT WALLS TO BE DEMOLISHED.

2 DEMOLISH EXIST. DOOR, FRAME, & ALL ASSOCAITED HARDWARE

DEMOLITION KEYNOTES

3 DEMOLISH EXIST. CASEWORK

4 DEMOLISH EXIST. DOOR AND PREPARE FRAME TO RECEIVE NEW DOOR AND HARDWARE

5 REMOVE REMNANTS OF EXIST. CARPET GLUE & PREPARE SLAB TO RECEIVE NEW FLOOR FINISH PER FLOOR FINISH MFR. RECOMMENDATIONS

6 DEMOLISH ALL LAYERS OF VINYL TILE FLOORING & VINYL BASE & PREPARE FLOORING & WALL TO RECEIVE NEW FINISHES

7 DEMOLISH PORTION OF EXIST. DISPLAY CASE GLASS, REAR ACCESS DOOR, AND ASSOCIATED HARDWARE AND PANELING & PREPARE OPENING TO RECEIVE NEW COUNTER

8 DEMOLISH EXIST. GYP. BD. AND/OR ACOUSTIC TILE CEILING & PREPARE AREA TO RECEIVE NEW CEILING FINISH

9 REMOVE ONE LOCKER AND PORTION OF BENCH TO ALLOW INSTALLATION OF NEW WALL.

10 REMOVE PORTION OF UPPER COUNTER TO PROVIDE ADA ACCESS. PREPARE CASEWORK TO RECEIVE NEW FINISHES.

11 DISCONNECT EXIST. OVERHEAD COILING GATE AND ABANDONIN PLACE.

12 PROVIDE OPENING IN EXIST. CMU WALL FOR NEW DOOR.

13 DEMOLISH EXIST. WOOD FLOORING, SHIMS, SUPPORTS, & ACCESSORIES & PREPARE RECESSED SLAB TO RECEIVE LEVELING EPOXY & NEW FLOOR FINISH.

14 REMOVE & REPLACE EXIST. ASPHALT PAVING & ADJUST FOR POSITIVE FLOW & ADA ACCESS -SEE CIVIL

ECKSTEIN AND

WESTRICK, INC.

ANDERSON,


BEFORE YOU DIG

811CALL MISS DIG

(TOLL FREE)

3 WORKING DAYS

Phone 586 726 1234

Fax 586 726 8780


Shelby Township

Michigan 48315

www.aewinc.com

SHEET TITLE:


SCALE:

PRELIMINARY

PROJECT NO.

SHEET NO.

CLIENT:

PROJECT NAME:

CONSTRUCTION RECORD

DATE:




CALL MISS DIG




A100

0132-1007

SHELBY

TOWNSHIP

ACTIVITIES

CENTER

MLB

FIRST FLOOR

DEMOLITION PLAN

JRA 02/22/2019

SHELBY TOWNSHIP

1/8" = 1'-0"1

1st Floor Demolition



03/11/2019 ADDENDUM 1

UP

A201

2

OPEN OFFICE

104OFFICE

154

RECEPTION

152

STOR.

106

TOILET

153

NEW SIDEWALK- SEE CIVIL

EXISTING CONC. STOP

EXISTING STOOP

EXIST. STOOP

CORRIDOR

113

MENS

150

WOMENS

151

VESTIBULE

101

OFFICE

155

OFFICE

156

ROOM 5

137ROOM 4

138

ROOM 3

139

ROOM 2

140

ROOM 1

141

ROOM 6

133

ROOM 7

129

GYM

109

STOR.

108

OFFICE

110

MALE LOCKERS

118

MALE SHOWER

117

LAUNDRY

116 FEMALE SHOWER

115

MENS RESTROOM

111

WOMENS

RESTROOM

112

FEMALE

LOCKERS

114

SOUVENIRS

121

STOR.

122

MECH. / ELEC.

123

LAWN EQUIP.

124

STOR.

126JAN.

127

STOR.

131

OFFICE

130

OFFICE

132

STOR.

134

STOR.

135

KITCHEN

148

STOR.

149

BREAK

105

LOBBY

102

PUBLIC COUNTER

103

WERTZ ROOM

107

VESTIBULE

119

OFFICE

120

STORAGE

125

ROOM 8

128

CORRIDOR

136

1

2

2

12

3

4

3

3 3 3

5

43333

4 4

4

4

5

5

5

5

5

4

4

5 5

4

4

5

5

5

5

5

5

5

6

4

4

7 7

7

7

7

7

7

8

A401

1

7

A411 4

A411

A

7 7 7

9

10

11

A411

9

114A

118A

119A

1' -

10

1/4

"1

9' -

8 3

/4"

11

' -

0"

17

' -

5"

10' - 3"

7' - 9"

4 5

11

A41110

A4124

2

5

1

13

REMOVE & REPLACEEXIST. ASPHALTAROUND CONC. STOOPADJUST SLOPE OF PAVINGTO COMPLY W/ ADA - SEECIVIL

REMOVE & REPLACEEXIST. ASPHALTAROUND CONC. STOOPADJUST SLOPE OF PAVINGTO COMPLY W/ ADA - SEECIVIL

A412

7

9

10

8

133

108

37' - 10"

4

APPROX. EXTENTS OF SLABTO BE LEVELED

+/- 21' - 8"

13

NEW SIDEWALK- SEE CIVIL 5

' -

0"

5' -

0"

(TYP.)

5' - 0" 5' - 0"

5' -

0"

5' -

0"

(VE

RIF

Y)

(VERIFY)

5' - 0"

(MIN.)

2' - 0"

EXIST. STOOP

(VERIFY)

5' - 0"

(MIN.)

2' - 0"

WINDOW AWNING OVERHANG, SEE DETAIL ON SHT. No. 8/A511 (TYP)

1/2" EXPANSION JT. W/ SEALANT, TYP.

1/2" EXPANSION JT. W/ SEALANT, TYP.

REGRADE EXISTING DISTURBED GROUND & PROVIDE TOP SOIL & SEEDS FOR RESTORATION

NEW CONC. STOOP

5' - 0"

4' - 8"

103

1PROVIDE NEW VINYL FLOORING W/ ATHLETIC BACKING. IN-FILL RECESSED SLAB @ FORMER LOCATION OF HARDWOOD FLOOR - SEE 5/A511.

2 NEW TRANSACTION COUNTER - SEE DETAILS SHEET A411

FLOOR PLAN KEYNOTES

3 INSTALL NEW CARPET TILES

4 INSTALL NEW VINYL FLOORING - SEE ROOM FINISH SCHEDULE

5 EXIST. FLOORING TO REMAIN - PATCH & REPAIR AS REQ'D

6 BASE BID: EXIST. GYM FLOORING TO REMAIN - PROVIDE NEW LOGO AT CENTER OF COURT - SEE DETAIL 2/A401

BID ALTERNATE 1: STRIP AND REFINISH ENTIRE HARDWOOD FLOOR IN GYM & PROVIDE NEW MARKINGS PER 1/A401

7 FURNITURE BY OWNER

8 REMOVABLE STAGE BY OWNER

9 EXTEND EXIST. BENCH TOPS TO NEW WALL - PROVIDE BREAK METAL IN-FILL PANELS BETWEEN EXIST. LOCKERS & NEW WALL - NEW MATERIALS TO MATCH EXIST.

10 INSTALL NEW URINAL SCREENS

11 REPLACE EXIST. PANEL OF DAMAGED INSULATED GLASS W/ NEW PANEL TO MATCH EXIST. GLASS

12 REDUCE WIDTH OF DISPLAY CASE - SEE 1 & 2/A411

13 REMOVE AND REPALCE EXISTING ASPHALT FOR POSITIVE FLOW - SEE CIVIL

ECKSTEIN AND

WESTRICK, INC.

ANDERSON,


BEFORE YOU DIG

811CALL MISS DIG

(TOLL FREE)

3 WORKING DAYS

Phone 586 726 1234

Fax 586 726 8780


Shelby Township

Michigan 48315

www.aewinc.com

SHEET TITLE:


SCALE:

PRELIMINARY

PROJECT NO.

SHEET NO.

CLIENT:

PROJECT NAME:

CONSTRUCTION RECORD

DATE:




CALL MISS DIG




A101

0132-1007

SHELBY

TOWNSHIP

ACTIVITIES

CENTER

MLB

FIRST FLOOR

RENOVATION PLAN

JRA 02/22/2019

SHELBY TOWNSHIP

1/8" = 1'-0"1

1st Floor New Construction



03/11/2019 ADDENDUM 1

SLO

PE

SLO

PE

SLOPE

CEILING LEGEND

24" X 24" SUSP. ACOUSTICAL LAY-IN CEILING

GYPSUM BOARD CEILING, PAINTED (MOISTURE RESISTANT IN SHOWERS)

2'x4' LED LIGHT RECESSED FIXTURE

2'x4' LED (NIGHT LIGHT) W/ BATTERY BACK-UP

RECESSED LED LIGHT FIXTURE

LED EXTERIOR

ADDITIONAL LIGHT FIXTURE

RETURN AIR GRILLE

CEILING DIFFUSOR

EXHAUST FAN

EMERGENCY LIGHTING

CEILING FAN

BAY LIGHTING

10

' - 1

0 1

/2"

(V.I.F.)

38' - 0 1/2"

NEW 2'x2' ACT CEILING

REWORK 2'X4' ACT CEILINGAS REQ'D FOR NEW WALL

PROVIDE NEW 8" DEEP MAS. LINTELW/ (2) #5 BOTTOM BARS IN EXIST. 8"CMU WALL. PROVIDE 8" (MIN) BEARINGW/ (1) #5 VERTICAL BAR AND GROUTEA. JAMB. M.O. TO BE 3'-4" WIDE X 7'-4"HIGH - PATCH & PAINT WALLS TO MATCHEXIST. ADJACENT WALLS

REWORK 2'X4' ACT CEILINGAS REQ'D FOR NEW WALL

ECKSTEIN AND

WESTRICK, INC.

ANDERSON,


BEFORE YOU DIG

811CALL MISS DIG

(TOLL FREE)

3 WORKING DAYS

Phone 586 726 1234

Fax 586 726 8780


Shelby Township

Michigan 48315

www.aewinc.com

SHEET TITLE:


SCALE:

PRELIMINARY

PROJECT NO.

SHEET NO.

CLIENT:

PROJECT NAME:

CONSTRUCTION RECORD

DATE:




CALL MISS DIG




A111

0132-1007

SHELBY

TOWNSHIP

ACTIVITIES

CENTER

MLB

FIRST FLOOR

REFLECED CEILING

PLAN

MLB 02/22/2019

SHELBY TOWNSHIP

1/8" = 1'-0"1

1st Floor Reflected Ceiling Plan



03/11/2019 ADDENDUM 1

EX. HVAC - 7

EX. HVAC - 2

HVAC - 4

HVAC - 6EX. HVAC - 1

EX. HVAC - 5EX. HVAC - 3

EX. EF

EX. EF

EX. EFEX. EF

EX. RD

EX. RD

EX. RD

EX. RD

EX. RD

EX. RD

EX. RD EX. RD

EX. RDEX. RD

EXIST. PLUMBING VENTS

EXIST. SATELLITE DISH

EXIST. ANTENNA

EXIST. PLUMBING VENTS

EX. EF

EX. RD EX. RD EX. RD EX. RD

H.P. (HIGH POINT)

H.P. (HIGH POINT)

H.P

. (H

IGH

PO

INT

)

SLO

PE

SLO

PE

SLO

PE

SLO

PE

SLO

PE

SLO

PE

SLO

PE

SLO

PE

SLO

PE

SLO

PE

SLO

PE

SLOPE

SLOPE

SLOPE

SLOPE

SLOPE

SLOPE

SLOPE

SLOPE SLOPE SLOPESLOPE

SLOPESLOPE SLOPE SLOPESLOPE

SLOPE

EX. ROOF HATCH

EX. ROOF HATCH

WALK PAD, TYP.

SLO

PE

SLO

PE

SLO

PE

SLO

PE

SLO

PE

SLO

PE

EX. PARAPET, TYP.

EX. PARAPET, TYP.

EXISTING PARAPET, TYPICAL

WALK PAD, TYP.

PROVIDE CRICKET AS REQUIRED, TYPICAL

ECKSTEIN AND

WESTRICK, INC.

ANDERSON,


BEFORE YOU DIG

811CALL MISS DIG

(TOLL FREE)

3 WORKING DAYS

Phone 586 726 1234

Fax 586 726 8780


Shelby Township

Michigan 48315

www.aewinc.com

SHEET TITLE:


SCALE:

PRELIMINARY

PROJECT NO.

SHEET NO.

CLIENT:

PROJECT NAME:

CONSTRUCTION RECORD

DATE:




CALL MISS DIG




A121

0132-1007

SHELBY

TOWNSHIP

ACTIVITIES

CENTER

MLB

ROOF PLAN

MLB 02/22/2019

SHELBY TOWNSHIP

1/8" = 1'-0"1

Roof Plan

ROOFING NOTES1. REMOVE EXIST. BALLASTED ROOF, INCLUDING, BUT NOT LIMITED TO, ALL STONE/GRAVEL, MEMBRANE ROOFING, WALK PADS, & ALL ACCESORIES AS REQUIRED FOR ROOFING SUBSTRATE TO RECEIVE NEW ROOFING & PATCH SUBSTRATE AS REQ'D TO RECEIVE NEW ROOFING MEMBRANE.

2. REMOVE & REPLACE ALL PARAPET CAPS & FLASHING, RUN MEMBRANE UP AND OVER ALL PARAPETS.

3. STEEL STRUCTURE PROVIDES GENERAL SLOPE DIRECTION. ROOFING CONTRACTOR TO PROVIDE A MINIMUM OF 1/4" PER FOOT SLOPE TO SUMPS IN ALL DIRECTIONS UTILIZING TAPPERED INSULATION AS REQUIRED. PROVIDE INSULATION FORMED SADDLES OR CRICKETS BETWEEN ROOF SUMPS TO INSURE PROPER DRAINIANGE.

4. VERIFY ROOF OPENING/EQUIPMENT SIZES AT LOCATIONS WITH MECHANICAL. MAINTIAN PROPER FLASHINGS AND DRAINAGE AROUND CURBS AT OPENINGS AS REQUIRED. COORDIANTE WITH ALL EXIST. EQUIPMENT, VENTS, & PENETRATIONS.

5. BASE INSULATION SHALL CONSIST OF TWO (2) LAYERS OF 2" THICK RIGID ROOF INSULATION. PROVIDE TAPPERED AREAS AS REQUIRED FOR PROPER DRAINAGE. ROOFING CONTRACTOR SHALL VERIFY COMPATIBIITY OF ALL INSULATION MATERIALS WITH MEMBRANE SUPPLIERS.

6. ROOF DETAILS ARE SHOWN FOR REFERENCE ONLY. ROOFING CONTRACTOR TO PROVIDE APPROPRIATE DETAIL/ASSEMBLY PER MANUFACTURE'S REQUIREMENTS FOR APPROVED ROOFING INSTALLATION WARRANTY.

7. GENERAL CONTRACTOR RESPONSIBLE FOR VERIFYING EXISTING ROOFING INTERFACE WITH RTUS AND ALL ROOF EQUIPMENT / PENETRATIONS AND PROVIDING FOR TEMPORARY DISCONNECTS AND REINSTALLATION OF ANY EQUIPMENT AS REQUIRED TO INSTALL NEW ROOFING.

8. PROVIDE 1/4" PER 12" MINIMUM SLOPE.



03/11/2019 ADDENDUM 1

DEMOLISH 3 BAYS OF EXIST DISPLAY CASE & HARDWARE - PREPARE OPENING TO RECEIVE NEW COUNTER & NEW DISPLAY CASE END WALL

PATCH & REPAIR EXIST. WALL AS REQ'D

REMOVE DISPLAY CASE BASE SUPPORTS AS REQ'D

FULL HEIGHT CABINETS W/ (2) DOORS & (5) ADJUSTABLE SHELVES- P. LAM-1

WALL CABINETS W/ (2) ADJUSTABLE SHELVES - P. LAM-1

BASE CABINETS W/ (1) ADJUSTABLE SHELF & DRAWERS - P. LAM -1

(4) DRAWER BASE CABINET - P. LAM-1

2' -

10

"1

' -

8"

2' -

6"

7' -

0"

3' - 0" 2' - 6" 2' - 6"

2" FILLER

2' - 6" 2' - 3" 2' - 3" 2' - 3"

4' -

6 1

/4"

2' -

5 3

/4"

SINK TRAP CONCEALED INTHIS CABINET - SEE PLUMBING

3' - 0" 1' - 3"1' - 3" 2' - 6" 2"

4" VINYL COVE BASE

6

A511

PROVIDE ADA PIPE COVER -TYP.

A411

3

2

OPEN OFFICE

104

VESTIBULE

101

OFFICE

156

OFFICE

155OFFICE

154

TOILET

153

RECEPTION

152

LOBBY

102

PUBLIC COUNTER

103

STOR.

106

BREAK

105

CORRIDOR

113

A411

B

A4118

A411 5

6

7

A411

9

7' -

4"

7' - 4"

1

A511

2

A511

5' -

5 1

/4"

7"9' - 7 1/2"

4' -

8"

3' -

0"

6"

2' -

7"

1' -

0"

39' - 4"

10

' - 1

0 1

/2" 7

A5113' - 9" 8' - 3" 3' - 5"

COUNTER @ 42" A.F.F.

COUNTER @ 30" A.F.F.

6' - 9 1/2"4' - 2 1/2"

(V.I.F

.)

(BA

SE

CA

B.)

4' -

1"

(OV

ER

HE

AD

CA

BIN

ET

)

8' -

0"

6' - 0"

103

TOOTH-IN NEW FACE SHELLSAS REQ'D @ LOC. WHEREEXIST. WALLS INTERSECT DEMOLISHED WALLS

PARTIAL HEIGHTSWINGING GATE

PARTIAL HEIGHTGYP. BD. WALL BELOW COUNTER

LOWER COUNTERCOLOR SS-1

UPPER COUNTERCOLOR SS-1

4" VINYL COVEBASE

3' -

6"

2' -

6"

OPEN

4" VINYL COVE BASE

PARTIAL HEIGHTGYP. BD. WALL BELOW COUNTER

LOWER COUNTERCOLOR SS-1

UPPER COUNTERCOLOR SS-1

2' -

6"

3' -

6"

1' - 0"

7' -

4"

2' -

6"

1' -

8"

2' -

10

" DOOR & DRAWERBASE CABINET W/(1) ADJ. SHELFP. LAM. -1

WALL CABINETS W/(2) ADJ. SHELVESP. LAM. -1

SOLID SURFACECOUNTER TOPW/ 4" BACKSPLASHCOLOR SS-1

WALL CABINETCORNER UNIT W/(2) ADJ. SHELVESP. LAM. -1

4" VINYL COVE BASE

1' - 0"

1' - 1"

1' - 6" 3' - 9"

3' - 0" 2' - 0"

+/- 1 1/2" FILLER

1' - 0"1' - 0"

1" FILLER

1' - 0"3'-0" MIN.1' - 0"

DOOR & DRAWERBASE CABINET W/(1) ADJ. SHELFP. LAM. -1



ADA ROLL UNDERAREA @ SINK


2' -

6"

4' -

6"

4" VINYL COVE BASE

PROVIDE ADA PIPE COVER, TYP.

3' - 11 1/2"

4' - 0" 1' - 0"1' - 0"

DOOR & DRAWERBASE CABINET W/(1) ADJ. SHELFP. LAM. -1




2' -

10

"1

' -

8"

2' -

6"

4" VINYL COVE BASE

2' -

6"

1' -

8"

2' -

10

"

1' - 0"1' - 0" 4' - 0"2' - 0"

2' - 0"

1" FILLER

2' - 0"

(4) DRAWERBASE CABINETP. LAM. -1

WALL CABINET W/(2) ADJ. SHELVESP. LAM. -1



4" VINYL COVE BASE

R 3

' - 4"

R 5' - 0 1/2"

R 6' - 0 1/2"

1' - 8 1/2" 1' - 0"6' - 8 1/4"

1' - 5"

R 6

' - 4

"

6' -

10

1/2

"RECEPTION

152

10

' - 1

0 1

/2"

MIN

.3' - 0"

EXIST. HIGHER COUNTERHEIGHT REMOVE EXIST.P. LAM FINISH & PROVIDENEW SOLID SURFACE

EXIST. LOWER COUNTERHEIGHT REMOVE EXIST.P. LAM FINISH & PROVIDENEW SOLID SURFACE FINISH

CUT NEW ADA OPENINGIN EXIST. HIGHER COUNTER

10

' -

0"

2' -

10

"

3' -

6"

4' -

6"

2' -

0"

REMOVE EXIST.P. LAM FINISH ONVERTICAL FACES &PROVIDE NEWP. LAM. -1 FINISH

EXIST. LOWER COUNTERHEIGHT REMOVE EXIST.P. LAM COUNTER & PROVIDENEW SOLID SURFACECOUNTER

EXIST. HIGHER COUNTERHEIGHT REMOVE EXIST.P. LAM COUNTER & PROVIDENEW SOLID SURFACECOUNTER

4" VINYL COVE BASE

OPEN

(4) DRAWER P. LAM. - 1BASE CABINET

(2) DOOR W/ DRAWERS P. LAM. -1 BASE CABINET

SOLID SURFACE COUNTERTOP W/ 4" BACKSPLASHCOLOR SS-1

MIN.

3' - 2" 2' - 9" 1' - 6"

+/- 1 1/2" FILLER

2' -

10

"

REFRIGERATOR BY OWNER

4" VINYL COVE BASE

ECKSTEIN AND

WESTRICK, INC.

ANDERSON,


BEFORE YOU DIG

811CALL MISS DIG

(TOLL FREE)

3 WORKING DAYS

Phone 586 726 1234

Fax 586 726 8780


Shelby Township

Michigan 48315

www.aewinc.com

SHEET TITLE:


SCALE:

PRELIMINARY

PROJECT NO.

SHEET NO.

CLIENT:

PROJECT NAME:

CONSTRUCTION RECORD

DATE:




CALL MISS DIG




A411

0132-1007

SHELBY

TOWNSHIP

ACTIVITIES

CENTER

MLB

INTERIOR

ELEVATIONS

MLB 02/22/2019

SHELBY TOWNSHIP

1/4" = 1'-0"1

DISPLAY CASE DEMOLITION DETAIL1/4" = 1'-0"

4ARTS ROOM CASEWORK ELEV.

1/4" = 1'-0"A

ENLARGED OFFICE AREA PLAN

1/4" = 1'-0"2

DISPLAY CASE ELEVATION

1/4" = 1'-0"3

SENIOR CENTER COUNTER ELEVATION

1/4" = 1'-0"5

BREAK ELEVATION EAST1/4" = 1'-0"

6BREAK RM. ELEVATION NORTH

1/4" = 1'-0"7

CLERICAL OFFICE COUNTER SOUTH

1/4" = 1'-0"8

CLERICAL OFFICE COUNTER WEST

3/8" = 1'-0"B

ENLARGED PLAN RECEPTION COUNTER

1/4" = 1'-0"9

RECEPTION ELEVATION - SOUTH

1/4" = 1'-0"10

ROOM 1 (141) CASEWORK ELEV.



03/11/2019 ADDENDUM 1

REMOVE EXIST. BOYS & GIRLS CLUBS LOGO SIGN, TIGER SIGN, & LETTERS -PREPARE WALL TO RECEIVE NEW SIGNAGE

EXIST. WALL MATS TO REMAIN

REPLACE PARTIAL HEIGHT WALL MATW/ WALL MAT TO MATCH ADJACENTEXIST. WALL MATS

PAINT EXIST. CMU WALL COLOR PT-3 TO UNDERSIDEOF DECK

PAINT EXIST. CMU WALLCOLOR PT-3


EXIST. WALL MATSTO REMAIN

6' -

0"

15

' -

4"

REPLACE PARTIAL HEIGHTWALL MATS W/ NEW WALLMATS TO MATCH ADJACENT WALL MATS

15

' -

4"

6' -

0"

PAINT EXIST. CMU WALL COLOR PT-3

PAINT EXIST. CMU WALL COLOR PT-2

PAINT EXIST. CMU WALL COLOR PT-3 TO UNDERSIDEOF DECK


EXIST. WALL MATS TO REMAIN

12" PIN MOUNTED CAST ALUMINUM LETTERS

6" PIN MOUNTED CAST ALUMINUM LETTERS

SHELBY TOWNSHIP LOGO CAST BRONZE SIGN



6' -

0"

15

' -

4"

CENTER SIGNAGE IN PAINTED BAND

NEW NEVCO MODEL 2702 SCOREBOARDS OFFSET FROM CENTER OF EXIST. BASKETBALL HOOPS - VERIFY FINAL LOC. W/ OWNER -SCOREBOARDS PURCHASED & INSTALLED BY OWNER - G.C. TO RUN POWER & CONDUITS TO FINAL LOCATION

PAINT EXIST. CMU WALL COLOR PT-3 TO UNDERSIDE OF DECK



EXIST. WALL MATSTO REMAIN

6' -

0"

15

' -

4"

CIR

CU

LA

R P

OR

TIO

N O

F L

OG

O

3' -

8"

DIA

.

NOTES:1. JPG FILE OF LOGO TO BE PROVIDED BY OWNER

3' - 8" DIA.

CAST BRONZE LOGOSIGN +/- 3'-8" DIA - TOWNSHIPTO PROVIDE IMAGE OF LOGOART

2' -

8"

10

' -

0"

PAINT EXIST. CMU WALLCOLOR PT-3 TO UNDERSIDEOF DECK

PAINT EXIST. CMU & GWB WALL COLOR PT-2

LOWER SECTIONPAINTED BY OWNER

PAINT EXIST. CMU WALLCOLOR PT-3 TOUNDERSIDE OF DECK

PAINT EXIST. CMU & GWB WALL COLOR PT-2

LOWER SECTIONPAINTED BYOWNER

10

' -

0"

2' -

8"


PAINT EXIST. CMU WALL& GWB COLOR PT-2

LOWER SECTIONPAINTED BYOWNER

10

' -

0"

2' -

8"


PAINT EXIST. CMU & GWBWALL COLOR PT-2

LOWER SECTION PAINTEDBY OWNER

10

' -

0"

2' -

8"

ECKSTEIN AND

WESTRICK, INC.

ANDERSON,


BEFORE YOU DIG

811CALL MISS DIG

(TOLL FREE)

3 WORKING DAYS

Phone 586 726 1234

Fax 586 726 8780


Shelby Township

Michigan 48315

www.aewinc.com

SHEET TITLE:


SCALE:

PRELIMINARY

PROJECT NO.

SHEET NO.

CLIENT:

PROJECT NAME:

CONSTRUCTION RECORD

DATE:




CALL MISS DIG




A412

0132-1007

SHELBY

TOWNSHIP

ACTIVITIES

CENTER

MLB

GYM ELEVATIONS

MLB 02/22/2019

SHELBY TOWNSHIP

1/8" = 1'-0"3

GYM NORTH DEMO ELEVATION

1/8" = 1'-0"4

GYM WEST ELEVATION

1/8" = 1'-0"2

GYM SOUTH ELEVATION

1/8" = 1'-0"1

GYM NORTH ELEVATION

1/8" = 1'-0"5

GYM EAST ELEVATION

1" = 1'-0"6

SHELBY TOWNSHIP PAINTED LOGO

BID ALTERNATE #2 REPLACE ALL WALL MATS W/ NEW MATS

1/8" = 1'-0"7

WERTZ ROOM NORTH ELEVATION1/8" = 1'-0"

8WERTZ ROOM EAST ELEVATION

1/8" = 1'-0"9

WERTZ ROOM WEST ELEVATION

1/8" = 1'-0"10

WERTZ ROOM SOUTH ELEVATION



03/11/2019 ADDENDUM 1

WALL BASE, SEE FIN. SCHEDULE

FIBERGLASS BATT. INSULATION

5/8" GYPSUM BOARD, FINISHED AND PAINTED

ACOUSTICAL LAY-IN SUSPENDED CEILING

SOLID BLOCKING AS REQ'D

BOTTOM OF STRUCTURE, PARTITION TIGHT TO DECK

3' -

6" 5/8" GYP. BD. BOTH

SIDE W/ PAINT ON METAL STUD @ 16" O.C.

1' - 0"

2' - 6"

2' -

6"

1' -

0"

SOLID SURFACECOUNTER

4" VINYL COVE BASE, TYP.

1/2"

1 1/2"x4" WD. W/ STAIN FINISH

2"x4" WD. BLOCK AS REQUIRED

EX. FIN. FLR. LINE

SUPPORT METAL BRACKET

11"

1"

HALF ROUND BOTH END, TYP.

6"

2' -

6"

2' - 6"

5/8" GYP. BD. BOTH SIDE W/ PAINT ON METAL STUD @ 16" O.C.

4" VINYL COVE BASE, TYP.

2"x4" WD. BLOCK AS REQUIRED

EX. FIN. FLR. LINE

SOLID SURFACEFACE TRIM


SOLID SURFACECOUNTER


1' -

8"

2' -

6"

7' -

0"

2' -

10

"

ADJUSTABLE SHELVES

LAMINATED CABINET

BULL NODE EDGE

SOLID SURFACE WITH INTEGRAL BACKSPLASH

LAMINATED CABINET

ADJUSTABLE SHELVES

BASE CABINET DRAWER

4" VINYL COVEBASE, TYP.

DOOR PULLS, TYP.SLOPE

NEW CONC. STOOP REINF. W/ #5 BARS @ 12" O.C. EA. WAY

5' - 0"

DRILL AND EPOXY GROUT #5 @ 12" O.C.

6"

EM

BE

DE

D

24"

12"

1/2" EXPANSION JOINT AROUND THE EDGE OF EXISTING STOOP FOOTING

EXIST. FIN. FLR. LINE

EXIST. WALL FOOTING

4" CONC. SLAB ON COMPACTED SAND FILL

1/2" EXPANSION JT. W/ SEALANT

4" CONC. SIDEWALK -SEE CIVIL

2"

VE

RIF

Y

REMOVE EXIST. FILL MATERIAL AND CLEAN CONCRETE SURFACE. INSTALL SIKA LEVEL PRIMER AND UNDERLAYMENT, OR APPROVED EQUAL, PER MANUFACTURERS RECOMMENDATIONS PRIOR TO PLACING NEW FLOOR FINISH.

CLEAN AND REMOVE FOREIGN MATERIAL, LEVEL CONC. SLAB PRIOR TO PLACING NEW FLOOR FINISH, TYPICAL

4' -

6"

1' - 0"

2' -

6"

2' - 1 1/2"

3' - 9"

OP

EN

( V

.I.F

. )

9' -

8"

LOWER COUNTER COLOR SS-1

4" VINYL COVE BASE, TYP.1/2" S.S. + 1/2" PLYWOOD

(3) 2"x8" TREATED WD. W/ WD. SHIM NAILER

( V

.I.F

.)

7' -

0"

EXIST. CMU BLOCK TO REMAIN & PAINT


EXIST. WALLTO REMAIN


2' -

0"

( V

.I.F

.)

6' -

0"

6' -

0"

5' -

6"

2' - 0"

6' -

0"

5' -

6"

5"

( V.I.F.)

4' - 0" 5"

5' - 2"

6" T

YP

.

2" T

YP

.

6"1 1/4" x 4" ALUM.

TUBE BRACING

3"x1 1/4" ALUM. W/ 4 ANCHOR BOLT EA. SIDE, TYP.

3"

1 1/4"

1"x6" PREFIN. ALUM. PANEL, TYPICAL

1"

6"

METAL FLASHING W/ CONT. CAULKING

EXISTING EXTERIOR WALL SURFACE

1 1/4"x3" ALUM. TUBE BRACING

EXISTING WINDOW

EX. FIN. FLR. LINE

(3) ADJUSTABLE SHELVES IN LOWER UNIT

LAMINATED CABINET

4" VINYL COVEBASE, TYP.

DOOR PULLS

(1) ADJUSTABLE SHELF IN UPPER UNIT

FIXED DIVIDER PANEL BETWEEN UPPER & LOWER UNIT

7' -

0"

4' -

6"

2' -

6"

ECKSTEIN AND

WESTRICK, INC.

ANDERSON,


BEFORE YOU DIG

811CALL MISS DIG

(TOLL FREE)

3 WORKING DAYS

Phone 586 726 1234

Fax 586 726 8780


Shelby Township

Michigan 48315

www.aewinc.com

SHEET TITLE:


SCALE:

PRELIMINARY

PROJECT NO.

SHEET NO.

CLIENT:

PROJECT NAME:

CONSTRUCTION RECORD

DATE:




CALL MISS DIG




A511

0132-1007

SHELBY

TOWNSHIP

ACTIVITIES

CENTER

Author

SECTION DETAILS

Checker 02/22/2019

SHELBY TOWNSHIP

3/4" = 1'-0"20

TYP. INTERIOR PARTITION3/4" = 1'-0"

1PUBLIC COUNTER SECTION - A

3/4" = 1'-0"2

PUBLIC COUNTER SECTION-B

1" = 1'-0"3

TYPICAL KITCHEN CABINET SECTION1/2" = 1'-0"

4CONC. STOOP SECTION

1 1/2" = 1'-0"5

FLOOR TRANSITION DETAIL

3/4" = 1'-0"7

SENIOR CENTER COUNTER - SECTION1/2" = 1'-0"

8TYP. AWNING ELEVATION AND SECTION



03/11/2019 ADDENDUM 1

3/4" = 1'-0"6

STORAGE CABINET SECTION

CASEWORK NOTES:

1. SEE SHEET A032 FOR CASEWORK HARDWARE INFORMATION.2. SEE SHEET A411 FOR CASEWORK COLOR CLASSIFICATIONS.

NOTE: PREFINISHED ALUM. COLOR TO BE SELECTED FROM MFR. FULL RANGE OF COLORS.

THK.

SEE WALL

CAULK AROUND PERIMETER

HM FRAME

DOOR & FRAME(SEE SCHED.)

WD. BLOCKING

GYP. BD. (SEE FINISH SCHEDULE FOR FINISH DTLS)

DOOR & FRAME (SEE SCHED.)

SEE ROOM FINISH SCHED. FOR FLOOR FINISH

THRESHOLD (SEE SCHED.)

4" HM FRAME HEAD -CAULK & SHIM AS REQUIRED

DOOR (SEE SCHED.)

EXIST. EXIST. CMU BOND BEAM

EXIST. 12" CMU BLOCK

2" HM FRAME JAMB - CAULK & SHIM AS REQUIRED

DOOR (SEE SCHED.)

EXIST. 12" CMU WALL

DOOR (SEE SCHED.)

THRESHOLD (SEE SCHED.)

HM FRAME BEYOND

JAMB BEYOND

4" HM FRAME HEAD -CAULK & SHIM AS REQUIRED - GROUT SOLID

DOOR(SEE SCHED.)

EXIST. CMU BOND BEAM

ADJ. STRAP ANCHOR

1" BULLNOSE @ EXPOSED CMU

2" HM FRAME JAMB -CAULK & SHIM AS REQUIRED

DOOR (SEE SCHED.)

EXIST. CMU WALL

PROVIDE 1" BULLNOSE EDGES @ ALL EXPOSED CORNERS - TYP.

ADJ. STRAP ANCHOR

DOOR ELEVATIONS

SCALE: 1/4"=1'-0"

B

SCH.

SEE

SE

E S

CH

.8" 8"

8"

W/

SC

H.

CO

OR

D.

3' -

0"

C

SCH.

SEE

SE

E S

CH

.

VISIONPANEL

A

SEE SCH.

7' -

0"

8"

1' - 8"

8" 8"

1' - 8"

8"

8"

W/

SC

H.

CO

OR

D.

3' -

0"

VISIONPANEL

T = TEMPERED GLASS1" INSULATED, LOW E, TINTED GLASS (EXTERIOR)

T T T

D

SEE SCH.

7' -

0"

3' - 0" 3' - 0"

6"

2' -

0"

3' - 0"

E

1

FRAME TYPES

SCALE: 1/4"=1'-0"

SE

E S

CH

.4

"

SCH.

SEE

SCALE: 1/4"=1'-0"

2"

SCH.

SEE 2"

2

SE

E S

CH

.2

"

SCH.

SEE

2"

SCH.

SEE 2"

4" HM FRAME HEAD -CAULK & SHIM AS REQUIRED - GROUT SOLID

DOOR(SEE SCHED.)

NEW 8" CMU BOND BEAM W/ (2) #5 BARS @ BOTT.

1" BULLNOSE @ EXPOSED CMU

ECKSTEIN AND

WESTRICK, INC.

ANDERSON,


BEFORE YOU DIG

811CALL MISS DIG

(TOLL FREE)

3 WORKING DAYS

Phone 586 726 1234

Fax 586 726 8780


Shelby Township

Michigan 48315

www.aewinc.com

SHEET TITLE:


SCALE:

PRELIMINARY

PROJECT NO.

SHEET NO.

CLIENT:

PROJECT NAME:

CONSTRUCTION RECORD

DATE:




CALL MISS DIG




A601

0132-1007

SHELBY

TOWNSHIP

ACTIVITIES

CENTER

Author

DOOR SCHEDULE

& DETAILS

Checker 02/22/2019

SHELBY TOWNSHIP

1 1/2" = 1'-0"5

HM DR FRAME @ MET. STUDHEAD/JAMB DETAIL

1 1/2" = 1'-0"4

HM DR FRAME @ MET. STUD SILLDETAIL

1 1/2" = 1'-0"3

HM DR FRAME @ EXT. BLOCK WALLHEAD DETAIL

1 1/2" = 1'-0"2

HM DR FRAME @ EXT. BLOCK WALLJAMB DETAIL

1 1/2" = 1'-0"1

HM DR FRAME @ BRICK/BLOCK WALLSILL DETAIL

1 1/2" = 1'-0"8

HM DR FRAME @ BLOCK WALL HEADDETAIL

1 1/2" = 1'-0"9

HM DR FRAME @ BLOCK WALL JAMBDETAIL

Door Schedule

No.

Door Frame Detail

FireRating Threshold HW Set CommentsWidth Height Thickness DR. Elev.

DR.Material Finish

FrameType

FrameMaterial Finish Head Jamb Sill

103 3' - 0" 2' - 0" 1 3/4"

108 6' - 0" 7' - 0" 1 3/4" D HM PT -- HM PT 8/A602 9/A602 -- 4 PROVIDE NEW PR. DOORS IN EXIST.H.M. FRAME - PAINT EXIST. FRAME

114A 3' - 0" 7' - 0" 1 3/4" C WD ST 2 HM PT 5/A602 5/A602 4/A602 2

118A 3' - 0" 7' - 0" 1 3/4" C WD ST 2 HM PT 5/A602 5/A602 4/A602 2

119A 6' - 0" 7' - 0" 1 3/4" A HM PT -- HM PT 3/A602 2/A602 1/A602 ALUM 1 PROVIDE NEW PR. DOORS IN EXIST.H.M. FRAME - PAINT EXIST. FRAME

133 3' - 0" 7' - 0" 1 3/4" B WD ST 1 HM PT 10/A602 8/A602 -- 3

NOTES:1. G.C. TO PROVIDE NEW CORES AT ALL EXTERIOR DOORS. 1 1/2" = 1'-0"

10NEW MAS. LINTEL DETAIL



03/11/2019 ADDENDUM 1

VCT FINISED FLOOR

ARMSTRONG VTO TRANSITION

CARPET

TILE FINISED FLOOR

SCHLUTER RENO-TK

CARPET

VCT FINISHED FLOOR

ARMSTRONG VT8 TRANSITION

SEALED CONC. FLOOR

ECKSTEIN AND

WESTRICK, INC.

ANDERSON,


BEFORE YOU DIG

811CALL MISS DIG

(TOLL FREE)

3 WORKING DAYS

Phone 586 726 1234

Fax 586 726 8780


Shelby Township

Michigan 48315

www.aewinc.com

SHEET TITLE:


SCALE:

PRELIMINARY

PROJECT NO.

SHEET NO.

CLIENT:

PROJECT NAME:

CONSTRUCTION RECORD

DATE:




CALL MISS DIG




A611

0132-1007

SHELBY

TOWNSHIP

ACTIVITIES

CENTER

Author

ROOM FINISH

SCHEDULE

Checker 02/22/2019

SHELBY TOWNSHIP

ROOM FINISH SCHEDULE

Number NameFloorFinish

BaseFinish

Walls Ceilings

WINDOWSTREATMENT CommentsN. Mat N. Finish E. Mat E. Finish S. Mat. S. Finish W. Mat. W. Finish Ceiling Material

CeilingFinish

CeilingHeight

101 VESTIBULE ETR ETR ETR ETR ETR ETR ETR ETR ETR ETR ETR ETR ETR

102 LOBBY ETR ETR ETR ETR ETR ETR ETR ETR ETR ETR ETR ETR ETR

103 PUBLIC COUNTER CPT VINYL ETR ETR GWB PT-1 GWB PT-1 ETR ETR ETR ETR ETR EXIST. CMU WALLS TO REMAIN, PAINT NEW PARTIALHEIGHT WALL FOR COUNTER

104 OPEN OFFICE CPT VINYL CMU/GWB PT-1 ETR ETR ETR ETR CMU/GWB PT-1 ETR ETR ETR

105 BREAK LV-1 VINYL ETR ETR ETR ETR ETR ETR ETR ETR ETR ETR ETR

106 STOR. LV-1 VINYL ETR ETR ETR ETR ETR ETR ETR ETR ETR ETR ETR

107 WERTZ ROOM LV-2 VINYL ETR ETR ETR ETR ETR ETR ETR ETR ETR ETR ETR

108 STOR. ETR ETR ETR ETR ETR ETR ETR ETR ETR ETR ETR ETR ETR

109 GYM ETR ETR CMU PT-2/PT-3 CMU PT-2/PT-3 CMU PT-2/PT-3 CMU PT-2/PT-3 ETR ETR ETR

110 OFFICE LV-1 VINYL ETR ETR ETR ETR ETR ETR ETR ETR ETR ETR ETR

111 MENS RESTROOM ETR ETR ETR ETR ETR ETR ETR ETR GWB PT-1 ETR ACT ETR EXIST. CMU WALLS TO REMAIN, PAINT NEW GYPSUMBOARD WALLS

112 WOMENSRESTROOM

ETR ETR ETR ETR ETR ETR ETR ETR GWB PT-1 ETR ACT ETR EXIST. CMU WALLS TO REMAIN, PAINT NEW GYPSUMBOARD WALLS

113 CORRIDOR ETR ETR ETR ETR ETR ETR ETR ETR ETR ETR ETR ETR ETR

114 FEMALE LOCKERS ETR ETR ETR ETR GWB PT-1 ETR ETR ETR ETR ETR ACT ETR

115 FEMALE SHOWER ETR ETR ETR ETR ETR ETR ETR ETR ETR ETR ETR ETR ETR

116 LAUNDRY ETR ETR ETR ETR ETR ETR ETR ETR ETR ETR ETR ETR ETR

117 MALE SHOWER ETR ETR ETR ETR ETR ETR ETR ETR ETR ETR ETR ETR ETR

118 MALE LOCKERS ETR ETR ETR ETR GWB PT-1 ETR ETR ETR ETR ETR ACT ETR

119 VESTIBULE LV-1 VINYL ETR ETR ETR ETR ETR ETR ETR ETR ETR ETR ETR


121 SOUVENIRS LV-1 ETR ETR ETR ETR ETR ETR ETR ETR ETR ETR ETR ETR

122 STOR. LV-1 ETR ETR ETR ETR ETR ETR ETR ETR ETR ETR ETR ETR

123 MECH. / ELEC. ETR ETR ETR ETR ETR ETR ETR ETR ETR ETR ETR ETR ETR

124 LAWN EQUIP. ETR ETR ETR ETR ETR ETR ETR ETR ETR ETR ETR ETR ETR

125 STORAGE VCT-1 ETR ETR ETR ETR ETR ETR ETR ETR ETR ETR ETR ETR

126 STOR. VCT-1 VINYL ETR ETR ETR ETR ETR ETR ETR ETR ETR ETR ETR

127 JAN. VCT-1 ETR ETR ETR ETR ETR ETR ETR ETR ETR ETR ETR ETR

128 ROOM 8 LV-1 VINYL ETR ETR ETR ETR ETR ETR ETR ETR ETR ETR ETR








136 CORRIDOR LV-1 VINYL ETR ETR ETR ETR ETR ETR ETR ETR ETR ETR ETR

137 ROOM 5 CPT VINYL ETR ETR ETR ETR ETR ETR ETR ETR ETR ETR ETR





148 KITCHEN ETR ETR ETR ETR ETR ETR ETR ETR ETR ETR ETR ETR ETR

149 STOR. ETR ETR ETR ETR ETR ETR ETR ETR ETR ETR ETR ETR ETR

150 MENS ETR ETR ETR ETR ETR ETR ETR ETR ETR ETR ETR ETR ETR

151 WOMENS ETR ETR ETR ETR ETR ETR ETR ETR ETR ETR ETR ETR ETR

152 RECEPTION CPT VINYL CMU PT-1 CMU PT-1 CMU PT-1 CMU PT-1 ACT ACT 10'-0"

153 TOILET ETR ETR ETR ETR ETR ETR ETR ETR ETR ETR ETR ETR ETR

154 OFFICE CPT VINYL ETR ETR ETR ETR ETR ETR ETR ETR ETR ETR ETR





FLOORINGCPT CARPETCT CERAMIC TILEFG FOOT GRILLELV LUXURY VINYLETR EXITING TO REMAINEPOXY EPOXY COATINGRF RUBBER FLOORSC SEALED CONCRETEVCT VINYL COMPOSTION TILE

WALLSALUM ALUMINUMCMU CONCRETE MASONRY UNITETR EXITING TO REMAINGF CMU BURNISHED CONCRETE MASONRY UNITGL GLASSGYP BD GYPSUM BOARDPT PAINT

CEILINGACT ACOUSTIC CEILING TILEAT# ACOUSTIC TILE TYPE (NUMBER)ETR EXISTING TO REMAIN

BASEETR EXISTING TO REMAINRB RUBBER BASEWD WOOD BASE

PAINTPT-1 COLOR SELECTED BY OWNER FOR WALLSPT-2 ANY GYP. BD. CEILINGS REQUIRING PAINT TO BE WHITE - VERIFY COLOR W/ OWNER

ROOM FINISH ABBREVIATIONS

6" = 1'-0"1

CARPET / VCT TRANSITION

6" = 1'-0"2

CARPET / TILE TRANSITION

6" = 1'-0"3

VCT / CONCRETE TRANSITION

ECKSTEIN ANDWESTRICK, INC.

ANDERSON,

Phone 586 726 1234 Fax 586 726 8780

51301 Schoenherr RoadShelby Township

Michigan 48315

www.aewinc.com

5145 Livernois, Suite 100

Fax: 248-879-0007

Troy, Michigan 48098-3276

Tel: 248-879-5666


CONSULTING ENGINEERS

Peter Basso Associates Inc

PBA Project No.: 2018-0451


SHEET TITLE:


SCALE:

PRELIMINARY


PROJECT NO.

SHEET NO.

CLIENT:

PROJECT NAME:

CONSTRUCTION RECORD

DATE:

UTILITY INFORMATION, AS SHOWN, INDICATES

APPROXIMATE LOCATIONS AND TYPES OF EXISTING

FACILITIES ONLY, AS DISCLOSED BY RECORDS PROVIDED

TO THIS FIRM FROM THE VARIOUS UTILITY COMPANIES. NO

GUARANTEE IS GIVEN OR IMPLIED AS TO THE

COMPLETENESS OR ACCURACY THEREOF.

PRIOR TO CONSTRUCTION, ALL LOCATIONS AND DEPTHS

OF EXISTING OVERHEAD AND UNDERGROUND UTILITIES (IN

CONFLICT WITH THE CONSTRUCTION OF THESE PROPOSED

IMPROVEMENTS) SHALL BE VERIFIED IN THE FIELD. DURING

THE CONSTRUCTION, THE CONTRACTOR SHALL PROTECT

AND SUPPORT ALL UTILITIES THAT ARE ENCOUNTERED. (

ALL COSTS FOR UTILITY LOCATION VERIFICATION,

SUPPORT AND PROTECTION SHALL BE INCLUDED IN THE

PROPOSED PAY ITEM CONFLICTING WITH THAT UTILITY ).

DURING CONSTRUCTION, THE CONTRACTOR SHALL USE

EXTREME CAUTION WHEN OPERATING NEAR ANY AND ALL

OVERHEAD AND/OR BURIED UTILITIES.

0132-1007

SHELBYTOWNSHIPACTIVITIESCENTER

SHELBY TOWNSHIP

02/28/2019

50% CONSTRUCTION DOCUMENTS01/22/2019

Know what's below.72 hours before you dig.

CallR


BID ISSUE02/28/2019

DATE SIGNED: 03-05-2019

..

MECHANICALSPECIFICATIONS

M003

1/8"=1'-0"

ADDENDUM 103/11/2019

AutoCAD SHX Text

1.STANDARD: ASSE 1070.STANDARD: ASSE 1070.

AutoCAD SHX Text

2.PRESSURE RATING: 125 PSIG.PRESSURE RATING: 125 PSIG.

AutoCAD SHX Text

3.TYPE: THERMOSTATICALLY CONTROLLED WATER MIXING VALVE.TYPE: THERMOSTATICALLY CONTROLLED WATER MIXING VALVE.

AutoCAD SHX Text

4.MATERIAL: BRONZE BODY WITH CORROSION-RESISTANT INTERIOR COMPONENTS.MATERIAL: BRONZE BODY WITH CORROSION-RESISTANT INTERIOR COMPONENTS.

AutoCAD SHX Text

5.CONNECTIONS: 1/2-INCH UNION OR 3/8-INCHCOMPRESSION; WITH INTEGRAL CHECK VALVES.CONNECTIONS: 1/2-INCH UNION OR 3/8-INCHCOMPRESSION; WITH INTEGRAL CHECK VALVES.

AutoCAD SHX Text

6.OUTLET TEMPERATURE RANGE: ADJUSTABLE FROM 85 DEG F TO 120 DEG F. SET AT 105 DEG F.OUTLET TEMPERATURE RANGE: ADJUSTABLE FROM 85 DEG F TO 120 DEG F. SET AT 105 DEG F.

AutoCAD SHX Text

7.MINIMUM FLOW RATE: 0.5 GPMMINIMUM FLOW RATE: 0.5 GPM

AutoCAD SHX Text

8.VALVE FINISH: CHROME PLATED.VALVE FINISH: CHROME PLATED.

AutoCAD SHX Text

9.MANUFACTURERS: APOLLO VALVES; MODEL MVD (34D SERIES) | BRADLEY CORPORATION | LAWLER MANUFACTURERS: APOLLO VALVES; MODEL MVD (34D SERIES) | BRADLEY CORPORATION | LAWLER APOLLO VALVES; MODEL MVD (34D SERIES) | BRADLEY CORPORATION | LAWLER APOLLO VALVES; MODEL MVD (34D SERIES) | BRADLEY CORPORATION | LAWLER VALVES; MODEL MVD (34D SERIES) | BRADLEY CORPORATION | LAWLER VALVES; MODEL MVD (34D SERIES) | BRADLEY CORPORATION | LAWLER MODEL MVD (34D SERIES) | BRADLEY CORPORATION | LAWLER MODEL MVD (34D SERIES) | BRADLEY CORPORATION | LAWLER MVD (34D SERIES) | BRADLEY CORPORATION | LAWLER MVD (34D SERIES) | BRADLEY CORPORATION | LAWLER (34D SERIES) | BRADLEY CORPORATION | LAWLER (34D SERIES) | BRADLEY CORPORATION | LAWLER SERIES) | BRADLEY CORPORATION | LAWLER SERIES) | BRADLEY CORPORATION | LAWLER | BRADLEY CORPORATION | LAWLER | BRADLEY CORPORATION | LAWLER BRADLEY CORPORATION | LAWLER BRADLEY CORPORATION | LAWLER CORPORATION | LAWLER CORPORATION | LAWLER | LAWLER | LAWLER LAWLER LAWLER MANUFACTURING COMPANY, INC. | LEONARD VALVE COMPANY; SERIES 170 AND 270 | WATTS WATER COMPANY, INC. | LEONARD VALVE COMPANY; SERIES 170 AND 270 | WATTS WATER COMPANY, INC. | LEONARD VALVE COMPANY; SERIES 170 AND 270 | WATTS WATER INC. | LEONARD VALVE COMPANY; SERIES 170 AND 270 | WATTS WATER INC. | LEONARD VALVE COMPANY; SERIES 170 AND 270 | WATTS WATER | LEONARD VALVE COMPANY; SERIES 170 AND 270 | WATTS WATER | LEONARD VALVE COMPANY; SERIES 170 AND 270 | WATTS WATER LEONARD VALVE COMPANY; SERIES 170 AND 270 | WATTS WATER LEONARD VALVE COMPANY; SERIES 170 AND 270 | WATTS WATER VALVE COMPANY; SERIES 170 AND 270 | WATTS WATER VALVE COMPANY; SERIES 170 AND 270 | WATTS WATER COMPANY; SERIES 170 AND 270 | WATTS WATER COMPANY; SERIES 170 AND 270 | WATTS WATER SERIES 170 AND 270 | WATTS WATER SERIES 170 AND 270 | WATTS WATER 170 AND 270 | WATTS WATER 170 AND 270 | WATTS WATER AND 270 | WATTS WATER AND 270 | WATTS WATER 270 | WATTS WATER 270 | WATTS WATER | WATTS WATER | WATTS WATER WATTS WATER WATTS WATER WATER WATER TECHNOLOGIES, INC.; POWERS DIVISION; HYDROGUARD SERIES E480 AND LM495 | WATTS WATER INC.; POWERS DIVISION; HYDROGUARD SERIES E480 AND LM495 | WATTS WATER INC.; POWERS DIVISION; HYDROGUARD SERIES E480 AND LM495 | WATTS WATER POWERS DIVISION; HYDROGUARD SERIES E480 AND LM495 | WATTS WATER POWERS DIVISION; HYDROGUARD SERIES E480 AND LM495 | WATTS WATER DIVISION; HYDROGUARD SERIES E480 AND LM495 | WATTS WATER DIVISION; HYDROGUARD SERIES E480 AND LM495 | WATTS WATER HYDROGUARD SERIES E480 AND LM495 | WATTS WATER HYDROGUARD SERIES E480 AND LM495 | WATTS WATER SERIES E480 AND LM495 | WATTS WATER SERIES E480 AND LM495 | WATTS WATER E480 AND LM495 | WATTS WATER E480 AND LM495 | WATTS WATER AND LM495 | WATTS WATER AND LM495 | WATTS WATER LM495 | WATTS WATER LM495 | WATTS WATER | WATTS WATER | WATTS WATER WATTS WATER WATTS WATER WATER WATER TECHNOLOGIES, INC.; WATTS REGULATOR CO. | ZURN PLUMBING PRODUCTS GROUP; WILKINS DIV.

AutoCAD SHX Text

SANITARY WASTE AND VENT PIPING

AutoCAD SHX Text

A.PIPING SYSTEM MATERIALS ARE SCHEDULED ON THE DRAWINGS.PIPING SYSTEM MATERIALS ARE SCHEDULED ON THE DRAWINGS.

AutoCAD SHX Text

B.PIPING MATERIALS SHALL BEAR LABEL, STAMP, OR OTHER MARKINGS OF SPECIFIED TESTING AGENCY.PIPING MATERIALS SHALL BEAR LABEL, STAMP, OR OTHER MARKINGS OF SPECIFIED TESTING AGENCY.

AutoCAD SHX Text

C.CAST-IRON SOIL PIPE SHALL BE MARKED WITH THE COLLECTIVE TRADEMARK OF CAST IRON SOIL PIPE CAST-IRON SOIL PIPE SHALL BE MARKED WITH THE COLLECTIVE TRADEMARK OF CAST IRON SOIL PIPE SOIL PIPE SHALL BE MARKED WITH THE COLLECTIVE TRADEMARK OF CAST IRON SOIL PIPE SOIL PIPE SHALL BE MARKED WITH THE COLLECTIVE TRADEMARK OF CAST IRON SOIL PIPE PIPE SHALL BE MARKED WITH THE COLLECTIVE TRADEMARK OF CAST IRON SOIL PIPE PIPE SHALL BE MARKED WITH THE COLLECTIVE TRADEMARK OF CAST IRON SOIL PIPE SHALL BE MARKED WITH THE COLLECTIVE TRADEMARK OF CAST IRON SOIL PIPE SHALL BE MARKED WITH THE COLLECTIVE TRADEMARK OF CAST IRON SOIL PIPE BE MARKED WITH THE COLLECTIVE TRADEMARK OF CAST IRON SOIL PIPE BE MARKED WITH THE COLLECTIVE TRADEMARK OF CAST IRON SOIL PIPE MARKED WITH THE COLLECTIVE TRADEMARK OF CAST IRON SOIL PIPE MARKED WITH THE COLLECTIVE TRADEMARK OF CAST IRON SOIL PIPE WITH THE COLLECTIVE TRADEMARK OF CAST IRON SOIL PIPE WITH THE COLLECTIVE TRADEMARK OF CAST IRON SOIL PIPE THE COLLECTIVE TRADEMARK OF CAST IRON SOIL PIPE THE COLLECTIVE TRADEMARK OF CAST IRON SOIL PIPE COLLECTIVE TRADEMARK OF CAST IRON SOIL PIPE COLLECTIVE TRADEMARK OF CAST IRON SOIL PIPE TRADEMARK OF CAST IRON SOIL PIPE TRADEMARK OF CAST IRON SOIL PIPE OF CAST IRON SOIL PIPE OF CAST IRON SOIL PIPE CAST IRON SOIL PIPE CAST IRON SOIL PIPE IRON SOIL PIPE IRON SOIL PIPE SOIL PIPE SOIL PIPE PIPE PIPE INSTITUTE (CISPI).

AutoCAD SHX Text

D.INSTALL SOIL AND WASTE DRAINAGE AND VENT PIPING AT THE FOLLOWING MINIMUM SLOPES, UNLESS INSTALL SOIL AND WASTE DRAINAGE AND VENT PIPING AT THE FOLLOWING MINIMUM SLOPES, UNLESS SOIL AND WASTE DRAINAGE AND VENT PIPING AT THE FOLLOWING MINIMUM SLOPES, UNLESS SOIL AND WASTE DRAINAGE AND VENT PIPING AT THE FOLLOWING MINIMUM SLOPES, UNLESS AND WASTE DRAINAGE AND VENT PIPING AT THE FOLLOWING MINIMUM SLOPES, UNLESS AND WASTE DRAINAGE AND VENT PIPING AT THE FOLLOWING MINIMUM SLOPES, UNLESS WASTE DRAINAGE AND VENT PIPING AT THE FOLLOWING MINIMUM SLOPES, UNLESS WASTE DRAINAGE AND VENT PIPING AT THE FOLLOWING MINIMUM SLOPES, UNLESS DRAINAGE AND VENT PIPING AT THE FOLLOWING MINIMUM SLOPES, UNLESS DRAINAGE AND VENT PIPING AT THE FOLLOWING MINIMUM SLOPES, UNLESS AND VENT PIPING AT THE FOLLOWING MINIMUM SLOPES, UNLESS AND VENT PIPING AT THE FOLLOWING MINIMUM SLOPES, UNLESS VENT PIPING AT THE FOLLOWING MINIMUM SLOPES, UNLESS VENT PIPING AT THE FOLLOWING MINIMUM SLOPES, UNLESS PIPING AT THE FOLLOWING MINIMUM SLOPES, UNLESS PIPING AT THE FOLLOWING MINIMUM SLOPES, UNLESS AT THE FOLLOWING MINIMUM SLOPES, UNLESS AT THE FOLLOWING MINIMUM SLOPES, UNLESS THE FOLLOWING MINIMUM SLOPES, UNLESS THE FOLLOWING MINIMUM SLOPES, UNLESS FOLLOWING MINIMUM SLOPES, UNLESS FOLLOWING MINIMUM SLOPES, UNLESS MINIMUM SLOPES, UNLESS MINIMUM SLOPES, UNLESS SLOPES, UNLESS SLOPES, UNLESS UNLESS UNLESS OTHERWISE INDICATED:

AutoCAD SHX Text

1.BUILDING SANITARY DRAIN: 1/8-INCH PER FOOT DOWNWARD IN DIRECTION OF FLOW, UNLESS OTHERWISE BUILDING SANITARY DRAIN: 1/8-INCH PER FOOT DOWNWARD IN DIRECTION OF FLOW, UNLESS OTHERWISE SANITARY DRAIN: 1/8-INCH PER FOOT DOWNWARD IN DIRECTION OF FLOW, UNLESS OTHERWISE SANITARY DRAIN: 1/8-INCH PER FOOT DOWNWARD IN DIRECTION OF FLOW, UNLESS OTHERWISE DRAIN: 1/8-INCH PER FOOT DOWNWARD IN DIRECTION OF FLOW, UNLESS OTHERWISE DRAIN: 1/8-INCH PER FOOT DOWNWARD IN DIRECTION OF FLOW, UNLESS OTHERWISE 1/8-INCH PER FOOT DOWNWARD IN DIRECTION OF FLOW, UNLESS OTHERWISE 1/8-INCH PER FOOT DOWNWARD IN DIRECTION OF FLOW, UNLESS OTHERWISE PER FOOT DOWNWARD IN DIRECTION OF FLOW, UNLESS OTHERWISE PER FOOT DOWNWARD IN DIRECTION OF FLOW, UNLESS OTHERWISE FOOT DOWNWARD IN DIRECTION OF FLOW, UNLESS OTHERWISE FOOT DOWNWARD IN DIRECTION OF FLOW, UNLESS OTHERWISE DOWNWARD IN DIRECTION OF FLOW, UNLESS OTHERWISE DOWNWARD IN DIRECTION OF FLOW, UNLESS OTHERWISE IN DIRECTION OF FLOW, UNLESS OTHERWISE IN DIRECTION OF FLOW, UNLESS OTHERWISE DIRECTION OF FLOW, UNLESS OTHERWISE DIRECTION OF FLOW, UNLESS OTHERWISE OF FLOW, UNLESS OTHERWISE OF FLOW, UNLESS OTHERWISE FLOW, UNLESS OTHERWISE FLOW, UNLESS OTHERWISE UNLESS OTHERWISE UNLESS OTHERWISE OTHERWISE OTHERWISE NOTED.

AutoCAD SHX Text

2.HORIZONTAL SANITARY DRAINAGE PIPING: 1/8-INCH PER FOOT DOWNWARD IN DIRECTION OF FLOW, UNLESS HORIZONTAL SANITARY DRAINAGE PIPING: 1/8-INCH PER FOOT DOWNWARD IN DIRECTION OF FLOW, UNLESS SANITARY DRAINAGE PIPING: 1/8-INCH PER FOOT DOWNWARD IN DIRECTION OF FLOW, UNLESS SANITARY DRAINAGE PIPING: 1/8-INCH PER FOOT DOWNWARD IN DIRECTION OF FLOW, UNLESS DRAINAGE PIPING: 1/8-INCH PER FOOT DOWNWARD IN DIRECTION OF FLOW, UNLESS DRAINAGE PIPING: 1/8-INCH PER FOOT DOWNWARD IN DIRECTION OF FLOW, UNLESS PIPING: 1/8-INCH PER FOOT DOWNWARD IN DIRECTION OF FLOW, UNLESS PIPING: 1/8-INCH PER FOOT DOWNWARD IN DIRECTION OF FLOW, UNLESS 1/8-INCH PER FOOT DOWNWARD IN DIRECTION OF FLOW, UNLESS 1/8-INCH PER FOOT DOWNWARD IN DIRECTION OF FLOW, UNLESS PER FOOT DOWNWARD IN DIRECTION OF FLOW, UNLESS PER FOOT DOWNWARD IN DIRECTION OF FLOW, UNLESS FOOT DOWNWARD IN DIRECTION OF FLOW, UNLESS FOOT DOWNWARD IN DIRECTION OF FLOW, UNLESS DOWNWARD IN DIRECTION OF FLOW, UNLESS DOWNWARD IN DIRECTION OF FLOW, UNLESS IN DIRECTION OF FLOW, UNLESS IN DIRECTION OF FLOW, UNLESS DIRECTION OF FLOW, UNLESS DIRECTION OF FLOW, UNLESS OF FLOW, UNLESS OF FLOW, UNLESS FLOW, UNLESS FLOW, UNLESS UNLESS UNLESS OTHERWISE NOTED.

AutoCAD SHX Text

3.VENT PIPING: 1/8-INCH PER FOOT DOWN TOWARD VERTICAL FIXTURE VENT OR TOWARD VENT STACK.VENT PIPING: 1/8-INCH PER FOOT DOWN TOWARD VERTICAL FIXTURE VENT OR TOWARD VENT STACK.

AutoCAD SHX Text

E.TEST SANITARY DRAINAGE AND VENT PIPING ACCORDING TO PROCEDURES OF AUTHORITIES HAVING JURISDICTION TEST SANITARY DRAINAGE AND VENT PIPING ACCORDING TO PROCEDURES OF AUTHORITIES HAVING JURISDICTION SANITARY DRAINAGE AND VENT PIPING ACCORDING TO PROCEDURES OF AUTHORITIES HAVING JURISDICTION SANITARY DRAINAGE AND VENT PIPING ACCORDING TO PROCEDURES OF AUTHORITIES HAVING JURISDICTION DRAINAGE AND VENT PIPING ACCORDING TO PROCEDURES OF AUTHORITIES HAVING JURISDICTION DRAINAGE AND VENT PIPING ACCORDING TO PROCEDURES OF AUTHORITIES HAVING JURISDICTION AND VENT PIPING ACCORDING TO PROCEDURES OF AUTHORITIES HAVING JURISDICTION AND VENT PIPING ACCORDING TO PROCEDURES OF AUTHORITIES HAVING JURISDICTION VENT PIPING ACCORDING TO PROCEDURES OF AUTHORITIES HAVING JURISDICTION VENT PIPING ACCORDING TO PROCEDURES OF AUTHORITIES HAVING JURISDICTION PIPING ACCORDING TO PROCEDURES OF AUTHORITIES HAVING JURISDICTION PIPING ACCORDING TO PROCEDURES OF AUTHORITIES HAVING JURISDICTION ACCORDING TO PROCEDURES OF AUTHORITIES HAVING JURISDICTION ACCORDING TO PROCEDURES OF AUTHORITIES HAVING JURISDICTION TO PROCEDURES OF AUTHORITIES HAVING JURISDICTION TO PROCEDURES OF AUTHORITIES HAVING JURISDICTION PROCEDURES OF AUTHORITIES HAVING JURISDICTION PROCEDURES OF AUTHORITIES HAVING JURISDICTION OF AUTHORITIES HAVING JURISDICTION OF AUTHORITIES HAVING JURISDICTION AUTHORITIES HAVING JURISDICTION AUTHORITIES HAVING JURISDICTION HAVING JURISDICTION HAVING JURISDICTION JURISDICTION JURISDICTION OR, IN ABSENCE OF PUBLISHED PROCEDURES, AS FOLLOWS:

AutoCAD SHX Text

1.TEST FOR LEAKS AND DEFECTS IN NEW PIPING AND PARTS OF EXISTING PIPING THAT HAVE BEEN ALTERED, TEST FOR LEAKS AND DEFECTS IN NEW PIPING AND PARTS OF EXISTING PIPING THAT HAVE BEEN ALTERED, FOR LEAKS AND DEFECTS IN NEW PIPING AND PARTS OF EXISTING PIPING THAT HAVE BEEN ALTERED, FOR LEAKS AND DEFECTS IN NEW PIPING AND PARTS OF EXISTING PIPING THAT HAVE BEEN ALTERED, LEAKS AND DEFECTS IN NEW PIPING AND PARTS OF EXISTING PIPING THAT HAVE BEEN ALTERED, LEAKS AND DEFECTS IN NEW PIPING AND PARTS OF EXISTING PIPING THAT HAVE BEEN ALTERED, AND DEFECTS IN NEW PIPING AND PARTS OF EXISTING PIPING THAT HAVE BEEN ALTERED, AND DEFECTS IN NEW PIPING AND PARTS OF EXISTING PIPING THAT HAVE BEEN ALTERED, DEFECTS IN NEW PIPING AND PARTS OF EXISTING PIPING THAT HAVE BEEN ALTERED, DEFECTS IN NEW PIPING AND PARTS OF EXISTING PIPING THAT HAVE BEEN ALTERED, IN NEW PIPING AND PARTS OF EXISTING PIPING THAT HAVE BEEN ALTERED, IN NEW PIPING AND PARTS OF EXISTING PIPING THAT HAVE BEEN ALTERED, NEW PIPING AND PARTS OF EXISTING PIPING THAT HAVE BEEN ALTERED, NEW PIPING AND PARTS OF EXISTING PIPING THAT HAVE BEEN ALTERED, PIPING AND PARTS OF EXISTING PIPING THAT HAVE BEEN ALTERED, PIPING AND PARTS OF EXISTING PIPING THAT HAVE BEEN ALTERED, AND PARTS OF EXISTING PIPING THAT HAVE BEEN ALTERED, AND PARTS OF EXISTING PIPING THAT HAVE BEEN ALTERED, PARTS OF EXISTING PIPING THAT HAVE BEEN ALTERED, PARTS OF EXISTING PIPING THAT HAVE BEEN ALTERED, OF EXISTING PIPING THAT HAVE BEEN ALTERED, OF EXISTING PIPING THAT HAVE BEEN ALTERED, EXISTING PIPING THAT HAVE BEEN ALTERED, EXISTING PIPING THAT HAVE BEEN ALTERED, PIPING THAT HAVE BEEN ALTERED, PIPING THAT HAVE BEEN ALTERED, THAT HAVE BEEN ALTERED, THAT HAVE BEEN ALTERED, HAVE BEEN ALTERED, HAVE BEEN ALTERED, BEEN ALTERED, BEEN ALTERED, ALTERED, ALTERED, EXTENDED, OR REPAIRED. IF TESTING IS PERFORMED IN SEGMENTS, SUBMIT SEPARATE REPORT FOR EACH OR REPAIRED. IF TESTING IS PERFORMED IN SEGMENTS, SUBMIT SEPARATE REPORT FOR EACH OR REPAIRED. IF TESTING IS PERFORMED IN SEGMENTS, SUBMIT SEPARATE REPORT FOR EACH REPAIRED. IF TESTING IS PERFORMED IN SEGMENTS, SUBMIT SEPARATE REPORT FOR EACH REPAIRED. IF TESTING IS PERFORMED IN SEGMENTS, SUBMIT SEPARATE REPORT FOR EACH IF TESTING IS PERFORMED IN SEGMENTS, SUBMIT SEPARATE REPORT FOR EACH IF TESTING IS PERFORMED IN SEGMENTS, SUBMIT SEPARATE REPORT FOR EACH TESTING IS PERFORMED IN SEGMENTS, SUBMIT SEPARATE REPORT FOR EACH TESTING IS PERFORMED IN SEGMENTS, SUBMIT SEPARATE REPORT FOR EACH IS PERFORMED IN SEGMENTS, SUBMIT SEPARATE REPORT FOR EACH IS PERFORMED IN SEGMENTS, SUBMIT SEPARATE REPORT FOR EACH PERFORMED IN SEGMENTS, SUBMIT SEPARATE REPORT FOR EACH PERFORMED IN SEGMENTS, SUBMIT SEPARATE REPORT FOR EACH IN SEGMENTS, SUBMIT SEPARATE REPORT FOR EACH IN SEGMENTS, SUBMIT SEPARATE REPORT FOR EACH SEGMENTS, SUBMIT SEPARATE REPORT FOR EACH SEGMENTS, SUBMIT SEPARATE REPORT FOR EACH SUBMIT SEPARATE REPORT FOR EACH SUBMIT SEPARATE REPORT FOR EACH SEPARATE REPORT FOR EACH SEPARATE REPORT FOR EACH REPORT FOR EACH REPORT FOR EACH FOR EACH FOR EACH EACH EACH TEST, COMPLETE WITH DIAGRAM OF PORTION OF PIPING TESTED.

AutoCAD SHX Text

2.ROUGHING-IN PLUMBING TEST PROCEDURE: TEST DRAINAGE AND VENT PIPING, EXCEPT OUTSIDE LEADERS, ROUGHING-IN PLUMBING TEST PROCEDURE: TEST DRAINAGE AND VENT PIPING, EXCEPT OUTSIDE LEADERS, PLUMBING TEST PROCEDURE: TEST DRAINAGE AND VENT PIPING, EXCEPT OUTSIDE LEADERS, PLUMBING TEST PROCEDURE: TEST DRAINAGE AND VENT PIPING, EXCEPT OUTSIDE LEADERS, TEST PROCEDURE: TEST DRAINAGE AND VENT PIPING, EXCEPT OUTSIDE LEADERS, TEST PROCEDURE: TEST DRAINAGE AND VENT PIPING, EXCEPT OUTSIDE LEADERS, PROCEDURE: TEST DRAINAGE AND VENT PIPING, EXCEPT OUTSIDE LEADERS, PROCEDURE: TEST DRAINAGE AND VENT PIPING, EXCEPT OUTSIDE LEADERS, TEST DRAINAGE AND VENT PIPING, EXCEPT OUTSIDE LEADERS, TEST DRAINAGE AND VENT PIPING, EXCEPT OUTSIDE LEADERS, DRAINAGE AND VENT PIPING, EXCEPT OUTSIDE LEADERS, DRAINAGE AND VENT PIPING, EXCEPT OUTSIDE LEADERS, AND VENT PIPING, EXCEPT OUTSIDE LEADERS, AND VENT PIPING, EXCEPT OUTSIDE LEADERS, VENT PIPING, EXCEPT OUTSIDE LEADERS, VENT PIPING, EXCEPT OUTSIDE LEADERS, PIPING, EXCEPT OUTSIDE LEADERS, PIPING, EXCEPT OUTSIDE LEADERS, EXCEPT OUTSIDE LEADERS, EXCEPT OUTSIDE LEADERS, OUTSIDE LEADERS, OUTSIDE LEADERS, LEADERS, LEADERS, ON COMPLETION OF ROUGHING-IN. CLOSE OPENINGS IN PIPING SYSTEM AND FILL WITH WATER TO POINT OF COMPLETION OF ROUGHING-IN. CLOSE OPENINGS IN PIPING SYSTEM AND FILL WITH WATER TO POINT OF COMPLETION OF ROUGHING-IN. CLOSE OPENINGS IN PIPING SYSTEM AND FILL WITH WATER TO POINT OF OF ROUGHING-IN. CLOSE OPENINGS IN PIPING SYSTEM AND FILL WITH WATER TO POINT OF OF ROUGHING-IN. CLOSE OPENINGS IN PIPING SYSTEM AND FILL WITH WATER TO POINT OF ROUGHING-IN. CLOSE OPENINGS IN PIPING SYSTEM AND FILL WITH WATER TO POINT OF ROUGHING-IN. CLOSE OPENINGS IN PIPING SYSTEM AND FILL WITH WATER TO POINT OF CLOSE OPENINGS IN PIPING SYSTEM AND FILL WITH WATER TO POINT OF CLOSE OPENINGS IN PIPING SYSTEM AND FILL WITH WATER TO POINT OF OPENINGS IN PIPING SYSTEM AND FILL WITH WATER TO POINT OF OPENINGS IN PIPING SYSTEM AND FILL WITH WATER TO POINT OF IN PIPING SYSTEM AND FILL WITH WATER TO POINT OF IN PIPING SYSTEM AND FILL WITH WATER TO POINT OF PIPING SYSTEM AND FILL WITH WATER TO POINT OF PIPING SYSTEM AND FILL WITH WATER TO POINT OF SYSTEM AND FILL WITH WATER TO POINT OF SYSTEM AND FILL WITH WATER TO POINT OF AND FILL WITH WATER TO POINT OF AND FILL WITH WATER TO POINT OF FILL WITH WATER TO POINT OF FILL WITH WATER TO POINT OF WITH WATER TO POINT OF WITH WATER TO POINT OF WATER TO POINT OF WATER TO POINT OF TO POINT OF TO POINT OF POINT OF POINT OF OF OF OVERFLOW, BUT NOT LESS THAN 10-FOOT HEAD OF WATER. FROM 15 MINUTES BEFORE INSPECTION STARTS BUT NOT LESS THAN 10-FOOT HEAD OF WATER. FROM 15 MINUTES BEFORE INSPECTION STARTS BUT NOT LESS THAN 10-FOOT HEAD OF WATER. FROM 15 MINUTES BEFORE INSPECTION STARTS NOT LESS THAN 10-FOOT HEAD OF WATER. FROM 15 MINUTES BEFORE INSPECTION STARTS NOT LESS THAN 10-FOOT HEAD OF WATER. FROM 15 MINUTES BEFORE INSPECTION STARTS LESS THAN 10-FOOT HEAD OF WATER. FROM 15 MINUTES BEFORE INSPECTION STARTS LESS THAN 10-FOOT HEAD OF WATER. FROM 15 MINUTES BEFORE INSPECTION STARTS THAN 10-FOOT HEAD OF WATER. FROM 15 MINUTES BEFORE INSPECTION STARTS THAN 10-FOOT HEAD OF WATER. FROM 15 MINUTES BEFORE INSPECTION STARTS 10-FOOT HEAD OF WATER. FROM 15 MINUTES BEFORE INSPECTION STARTS 10-FOOT HEAD OF WATER. FROM 15 MINUTES BEFORE INSPECTION STARTS HEAD OF WATER. FROM 15 MINUTES BEFORE INSPECTION STARTS HEAD OF WATER. FROM 15 MINUTES BEFORE INSPECTION STARTS OF WATER. FROM 15 MINUTES BEFORE INSPECTION STARTS OF WATER. FROM 15 MINUTES BEFORE INSPECTION STARTS WATER. FROM 15 MINUTES BEFORE INSPECTION STARTS WATER. FROM 15 MINUTES BEFORE INSPECTION STARTS FROM 15 MINUTES BEFORE INSPECTION STARTS FROM 15 MINUTES BEFORE INSPECTION STARTS 15 MINUTES BEFORE INSPECTION STARTS 15 MINUTES BEFORE INSPECTION STARTS MINUTES BEFORE INSPECTION STARTS MINUTES BEFORE INSPECTION STARTS BEFORE INSPECTION STARTS BEFORE INSPECTION STARTS INSPECTION STARTS INSPECTION STARTS STARTS STARTS TO COMPLETION OF INSPECTION, WATER LEVEL MUST NOT DROP. INSPECT JOINTS FOR LEAKS.

AutoCAD SHX Text

3.FINISHED PLUMBING TEST PROCEDURE: AFTER PLUMBING FIXTURES HAVE BEEN SET AND TRAPS FILLED WITH FINISHED PLUMBING TEST PROCEDURE: AFTER PLUMBING FIXTURES HAVE BEEN SET AND TRAPS FILLED WITH PLUMBING TEST PROCEDURE: AFTER PLUMBING FIXTURES HAVE BEEN SET AND TRAPS FILLED WITH PLUMBING TEST PROCEDURE: AFTER PLUMBING FIXTURES HAVE BEEN SET AND TRAPS FILLED WITH TEST PROCEDURE: AFTER PLUMBING FIXTURES HAVE BEEN SET AND TRAPS FILLED WITH TEST PROCEDURE: AFTER PLUMBING FIXTURES HAVE BEEN SET AND TRAPS FILLED WITH PROCEDURE: AFTER PLUMBING FIXTURES HAVE BEEN SET AND TRAPS FILLED WITH PROCEDURE: AFTER PLUMBING FIXTURES HAVE BEEN SET AND TRAPS FILLED WITH AFTER PLUMBING FIXTURES HAVE BEEN SET AND TRAPS FILLED WITH AFTER PLUMBING FIXTURES HAVE BEEN SET AND TRAPS FILLED WITH PLUMBING FIXTURES HAVE BEEN SET AND TRAPS FILLED WITH PLUMBING FIXTURES HAVE BEEN SET AND TRAPS FILLED WITH FIXTURES HAVE BEEN SET AND TRAPS FILLED WITH FIXTURES HAVE BEEN SET AND TRAPS FILLED WITH HAVE BEEN SET AND TRAPS FILLED WITH HAVE BEEN SET AND TRAPS FILLED WITH BEEN SET AND TRAPS FILLED WITH BEEN SET AND TRAPS FILLED WITH SET AND TRAPS FILLED WITH SET AND TRAPS FILLED WITH AND TRAPS FILLED WITH AND TRAPS FILLED WITH TRAPS FILLED WITH TRAPS FILLED WITH FILLED WITH FILLED WITH WITH WITH WATER, TEST CONNECTIONS AND PROVE THEY ARE GASTIGHT AND WATERTIGHT. PLUG VENT-STACK TEST CONNECTIONS AND PROVE THEY ARE GASTIGHT AND WATERTIGHT. PLUG VENT-STACK TEST CONNECTIONS AND PROVE THEY ARE GASTIGHT AND WATERTIGHT. PLUG VENT-STACK CONNECTIONS AND PROVE THEY ARE GASTIGHT AND WATERTIGHT. PLUG VENT-STACK CONNECTIONS AND PROVE THEY ARE GASTIGHT AND WATERTIGHT. PLUG VENT-STACK AND PROVE THEY ARE GASTIGHT AND WATERTIGHT. PLUG VENT-STACK AND PROVE THEY ARE GASTIGHT AND WATERTIGHT. PLUG VENT-STACK PROVE THEY ARE GASTIGHT AND WATERTIGHT. PLUG VENT-STACK PROVE THEY ARE GASTIGHT AND WATERTIGHT. PLUG VENT-STACK THEY ARE GASTIGHT AND WATERTIGHT. PLUG VENT-STACK THEY ARE GASTIGHT AND WATERTIGHT. PLUG VENT-STACK ARE GASTIGHT AND WATERTIGHT. PLUG VENT-STACK ARE GASTIGHT AND WATERTIGHT. PLUG VENT-STACK GASTIGHT AND WATERTIGHT. PLUG VENT-STACK GASTIGHT AND WATERTIGHT. PLUG VENT-STACK AND WATERTIGHT. PLUG VENT-STACK AND WATERTIGHT. PLUG VENT-STACK WATERTIGHT. PLUG VENT-STACK WATERTIGHT. PLUG VENT-STACK PLUG VENT-STACK PLUG VENT-STACK VENT-STACK VENT-STACK OPENINGS ON ROOF AND BUILDING DRAINS WHERE THEY LEAVE BUILDING. INTRODUCE AIR INTO PIPING ON ROOF AND BUILDING DRAINS WHERE THEY LEAVE BUILDING. INTRODUCE AIR INTO PIPING ON ROOF AND BUILDING DRAINS WHERE THEY LEAVE BUILDING. INTRODUCE AIR INTO PIPING ROOF AND BUILDING DRAINS WHERE THEY LEAVE BUILDING. INTRODUCE AIR INTO PIPING ROOF AND BUILDING DRAINS WHERE THEY LEAVE BUILDING. INTRODUCE AIR INTO PIPING AND BUILDING DRAINS WHERE THEY LEAVE BUILDING. INTRODUCE AIR INTO PIPING AND BUILDING DRAINS WHERE THEY LEAVE BUILDING. INTRODUCE AIR INTO PIPING BUILDING DRAINS WHERE THEY LEAVE BUILDING. INTRODUCE AIR INTO PIPING BUILDING DRAINS WHERE THEY LEAVE BUILDING. INTRODUCE AIR INTO PIPING DRAINS WHERE THEY LEAVE BUILDING. INTRODUCE AIR INTO PIPING DRAINS WHERE THEY LEAVE BUILDING. INTRODUCE AIR INTO PIPING WHERE THEY LEAVE BUILDING. INTRODUCE AIR INTO PIPING WHERE THEY LEAVE BUILDING. INTRODUCE AIR INTO PIPING THEY LEAVE BUILDING. INTRODUCE AIR INTO PIPING THEY LEAVE BUILDING. INTRODUCE AIR INTO PIPING LEAVE BUILDING. INTRODUCE AIR INTO PIPING LEAVE BUILDING. INTRODUCE AIR INTO PIPING BUILDING. INTRODUCE AIR INTO PIPING BUILDING. INTRODUCE AIR INTO PIPING INTRODUCE AIR INTO PIPING INTRODUCE AIR INTO PIPING AIR INTO PIPING AIR INTO PIPING INTO PIPING INTO PIPING PIPING PIPING SYSTEM EQUAL TO PRESSURE OF 1-INCH WG. USE U-TUBE OR MANOMETER INSERTED IN TRAP OF WATER EQUAL TO PRESSURE OF 1-INCH WG. USE U-TUBE OR MANOMETER INSERTED IN TRAP OF WATER EQUAL TO PRESSURE OF 1-INCH WG. USE U-TUBE OR MANOMETER INSERTED IN TRAP OF WATER TO PRESSURE OF 1-INCH WG. USE U-TUBE OR MANOMETER INSERTED IN TRAP OF WATER TO PRESSURE OF 1-INCH WG. USE U-TUBE OR MANOMETER INSERTED IN TRAP OF WATER PRESSURE OF 1-INCH WG. USE U-TUBE OR MANOMETER INSERTED IN TRAP OF WATER PRESSURE OF 1-INCH WG. USE U-TUBE OR MANOMETER INSERTED IN TRAP OF WATER OF 1-INCH WG. USE U-TUBE OR MANOMETER INSERTED IN TRAP OF WATER OF 1-INCH WG. USE U-TUBE OR MANOMETER INSERTED IN TRAP OF WATER 1-INCH WG. USE U-TUBE OR MANOMETER INSERTED IN TRAP OF WATER 1-INCH WG. USE U-TUBE OR MANOMETER INSERTED IN TRAP OF WATER WG. USE U-TUBE OR MANOMETER INSERTED IN TRAP OF WATER WG. USE U-TUBE OR MANOMETER INSERTED IN TRAP OF WATER USE U-TUBE OR MANOMETER INSERTED IN TRAP OF WATER USE U-TUBE OR MANOMETER INSERTED IN TRAP OF WATER U-TUBE OR MANOMETER INSERTED IN TRAP OF WATER U-TUBE OR MANOMETER INSERTED IN TRAP OF WATER OR MANOMETER INSERTED IN TRAP OF WATER OR MANOMETER INSERTED IN TRAP OF WATER MANOMETER INSERTED IN TRAP OF WATER MANOMETER INSERTED IN TRAP OF WATER INSERTED IN TRAP OF WATER INSERTED IN TRAP OF WATER IN TRAP OF WATER IN TRAP OF WATER TRAP OF WATER TRAP OF WATER OF WATER OF WATER WATER WATER CLOSET TO MEASURE THIS PRESSURE. AIR PRESSURE MUST REMAIN CONSTANT WITHOUT INTRODUCING TO MEASURE THIS PRESSURE. AIR PRESSURE MUST REMAIN CONSTANT WITHOUT INTRODUCING TO MEASURE THIS PRESSURE. AIR PRESSURE MUST REMAIN CONSTANT WITHOUT INTRODUCING MEASURE THIS PRESSURE. AIR PRESSURE MUST REMAIN CONSTANT WITHOUT INTRODUCING MEASURE THIS PRESSURE. AIR PRESSURE MUST REMAIN CONSTANT WITHOUT INTRODUCING THIS PRESSURE. AIR PRESSURE MUST REMAIN CONSTANT WITHOUT INTRODUCING THIS PRESSURE. AIR PRESSURE MUST REMAIN CONSTANT WITHOUT INTRODUCING PRESSURE. AIR PRESSURE MUST REMAIN CONSTANT WITHOUT INTRODUCING PRESSURE. AIR PRESSURE MUST REMAIN CONSTANT WITHOUT INTRODUCING AIR PRESSURE MUST REMAIN CONSTANT WITHOUT INTRODUCING AIR PRESSURE MUST REMAIN CONSTANT WITHOUT INTRODUCING PRESSURE MUST REMAIN CONSTANT WITHOUT INTRODUCING PRESSURE MUST REMAIN CONSTANT WITHOUT INTRODUCING MUST REMAIN CONSTANT WITHOUT INTRODUCING MUST REMAIN CONSTANT WITHOUT INTRODUCING REMAIN CONSTANT WITHOUT INTRODUCING REMAIN CONSTANT WITHOUT INTRODUCING CONSTANT WITHOUT INTRODUCING CONSTANT WITHOUT INTRODUCING WITHOUT INTRODUCING WITHOUT INTRODUCING INTRODUCING INTRODUCING ADDITIONAL AIR THROUGHOUT PERIOD OF INSPECTION. INSPECT PLUMBING FIXTURE CONNECTIONS FOR GAS AIR THROUGHOUT PERIOD OF INSPECTION. INSPECT PLUMBING FIXTURE CONNECTIONS FOR GAS AIR THROUGHOUT PERIOD OF INSPECTION. INSPECT PLUMBING FIXTURE CONNECTIONS FOR GAS THROUGHOUT PERIOD OF INSPECTION. INSPECT PLUMBING FIXTURE CONNECTIONS FOR GAS THROUGHOUT PERIOD OF INSPECTION. INSPECT PLUMBING FIXTURE CONNECTIONS FOR GAS PERIOD OF INSPECTION. INSPECT PLUMBING FIXTURE CONNECTIONS FOR GAS PERIOD OF INSPECTION. INSPECT PLUMBING FIXTURE CONNECTIONS FOR GAS OF INSPECTION. INSPECT PLUMBING FIXTURE CONNECTIONS FOR GAS OF INSPECTION. INSPECT PLUMBING FIXTURE CONNECTIONS FOR GAS INSPECTION. INSPECT PLUMBING FIXTURE CONNECTIONS FOR GAS INSPECTION. INSPECT PLUMBING FIXTURE CONNECTIONS FOR GAS INSPECT PLUMBING FIXTURE CONNECTIONS FOR GAS INSPECT PLUMBING FIXTURE CONNECTIONS FOR GAS PLUMBING FIXTURE CONNECTIONS FOR GAS PLUMBING FIXTURE CONNECTIONS FOR GAS FIXTURE CONNECTIONS FOR GAS FIXTURE CONNECTIONS FOR GAS CONNECTIONS FOR GAS CONNECTIONS FOR GAS FOR GAS FOR GAS GAS GAS AND WATER LEAKS.

AutoCAD SHX Text

4.REPAIR LEAKS AND DEFECTS WITH NEW MATERIALS AND RETEST PIPING, OR PORTION THEREOF, UNTIL REPAIR LEAKS AND DEFECTS WITH NEW MATERIALS AND RETEST PIPING, OR PORTION THEREOF, UNTIL LEAKS AND DEFECTS WITH NEW MATERIALS AND RETEST PIPING, OR PORTION THEREOF, UNTIL LEAKS AND DEFECTS WITH NEW MATERIALS AND RETEST PIPING, OR PORTION THEREOF, UNTIL AND DEFECTS WITH NEW MATERIALS AND RETEST PIPING, OR PORTION THEREOF, UNTIL AND DEFECTS WITH NEW MATERIALS AND RETEST PIPING, OR PORTION THEREOF, UNTIL DEFECTS WITH NEW MATERIALS AND RETEST PIPING, OR PORTION THEREOF, UNTIL DEFECTS WITH NEW MATERIALS AND RETEST PIPING, OR PORTION THEREOF, UNTIL WITH NEW MATERIALS AND RETEST PIPING, OR PORTION THEREOF, UNTIL WITH NEW MATERIALS AND RETEST PIPING, OR PORTION THEREOF, UNTIL NEW MATERIALS AND RETEST PIPING, OR PORTION THEREOF, UNTIL NEW MATERIALS AND RETEST PIPING, OR PORTION THEREOF, UNTIL MATERIALS AND RETEST PIPING, OR PORTION THEREOF, UNTIL MATERIALS AND RETEST PIPING, OR PORTION THEREOF, UNTIL AND RETEST PIPING, OR PORTION THEREOF, UNTIL AND RETEST PIPING, OR PORTION THEREOF, UNTIL RETEST PIPING, OR PORTION THEREOF, UNTIL RETEST PIPING, OR PORTION THEREOF, UNTIL PIPING, OR PORTION THEREOF, UNTIL PIPING, OR PORTION THEREOF, UNTIL OR PORTION THEREOF, UNTIL OR PORTION THEREOF, UNTIL PORTION THEREOF, UNTIL PORTION THEREOF, UNTIL THEREOF, UNTIL THEREOF, UNTIL UNTIL UNTIL SATISFACTORY RESULTS ARE OBTAINED.

AutoCAD SHX Text

5.PREPARE REPORTS FOR TESTS AND REQUIRED CORRECTIVE ACTION.PREPARE REPORTS FOR TESTS AND REQUIRED CORRECTIVE ACTION.

AutoCAD SHX Text

DRAINAGE PIPING SPECIALTIES

AutoCAD SHX Text

A.DRAINAGE PIPING SPECIALTIES SHALL BEAR LABEL, STAMP, OR OTHER MARKINGS OF SPECIFIED TESTING DRAINAGE PIPING SPECIALTIES SHALL BEAR LABEL, STAMP, OR OTHER MARKINGS OF SPECIFIED TESTING PIPING SPECIALTIES SHALL BEAR LABEL, STAMP, OR OTHER MARKINGS OF SPECIFIED TESTING PIPING SPECIALTIES SHALL BEAR LABEL, STAMP, OR OTHER MARKINGS OF SPECIFIED TESTING SPECIALTIES SHALL BEAR LABEL, STAMP, OR OTHER MARKINGS OF SPECIFIED TESTING SPECIALTIES SHALL BEAR LABEL, STAMP, OR OTHER MARKINGS OF SPECIFIED TESTING SHALL BEAR LABEL, STAMP, OR OTHER MARKINGS OF SPECIFIED TESTING SHALL BEAR LABEL, STAMP, OR OTHER MARKINGS OF SPECIFIED TESTING BEAR LABEL, STAMP, OR OTHER MARKINGS OF SPECIFIED TESTING BEAR LABEL, STAMP, OR OTHER MARKINGS OF SPECIFIED TESTING LABEL, STAMP, OR OTHER MARKINGS OF SPECIFIED TESTING LABEL, STAMP, OR OTHER MARKINGS OF SPECIFIED TESTING STAMP, OR OTHER MARKINGS OF SPECIFIED TESTING STAMP, OR OTHER MARKINGS OF SPECIFIED TESTING OR OTHER MARKINGS OF SPECIFIED TESTING OR OTHER MARKINGS OF SPECIFIED TESTING OTHER MARKINGS OF SPECIFIED TESTING OTHER MARKINGS OF SPECIFIED TESTING MARKINGS OF SPECIFIED TESTING MARKINGS OF SPECIFIED TESTING OF SPECIFIED TESTING OF SPECIFIED TESTING SPECIFIED TESTING SPECIFIED TESTING TESTING TESTING AGENCY.

AutoCAD SHX Text

B.FLASHING MATERIALSFLASHING MATERIALS

AutoCAD SHX Text

1.COPPER SHEET: ASTM B 152/B 152M, OF THE FOLLOWING MINIMUM WEIGHTS AND THICKNESSES, UNLESS COPPER SHEET: ASTM B 152/B 152M, OF THE FOLLOWING MINIMUM WEIGHTS AND THICKNESSES, UNLESS SHEET: ASTM B 152/B 152M, OF THE FOLLOWING MINIMUM WEIGHTS AND THICKNESSES, UNLESS SHEET: ASTM B 152/B 152M, OF THE FOLLOWING MINIMUM WEIGHTS AND THICKNESSES, UNLESS ASTM B 152/B 152M, OF THE FOLLOWING MINIMUM WEIGHTS AND THICKNESSES, UNLESS ASTM B 152/B 152M, OF THE FOLLOWING MINIMUM WEIGHTS AND THICKNESSES, UNLESS B 152/B 152M, OF THE FOLLOWING MINIMUM WEIGHTS AND THICKNESSES, UNLESS B 152/B 152M, OF THE FOLLOWING MINIMUM WEIGHTS AND THICKNESSES, UNLESS 152/B 152M, OF THE FOLLOWING MINIMUM WEIGHTS AND THICKNESSES, UNLESS 152/B 152M, OF THE FOLLOWING MINIMUM WEIGHTS AND THICKNESSES, UNLESS 152M, OF THE FOLLOWING MINIMUM WEIGHTS AND THICKNESSES, UNLESS 152M, OF THE FOLLOWING MINIMUM WEIGHTS AND THICKNESSES, UNLESS OF THE FOLLOWING MINIMUM WEIGHTS AND THICKNESSES, UNLESS OF THE FOLLOWING MINIMUM WEIGHTS AND THICKNESSES, UNLESS THE FOLLOWING MINIMUM WEIGHTS AND THICKNESSES, UNLESS THE FOLLOWING MINIMUM WEIGHTS AND THICKNESSES, UNLESS FOLLOWING MINIMUM WEIGHTS AND THICKNESSES, UNLESS FOLLOWING MINIMUM WEIGHTS AND THICKNESSES, UNLESS MINIMUM WEIGHTS AND THICKNESSES, UNLESS MINIMUM WEIGHTS AND THICKNESSES, UNLESS WEIGHTS AND THICKNESSES, UNLESS WEIGHTS AND THICKNESSES, UNLESS AND THICKNESSES, UNLESS AND THICKNESSES, UNLESS THICKNESSES, UNLESS THICKNESSES, UNLESS UNLESS UNLESS OTHERWISE INDICATED:

AutoCAD SHX Text

a.GENERAL APPLICATIONS: 12 OZ./SQ. FT.GENERAL APPLICATIONS: 12 OZ./SQ. FT.

AutoCAD SHX Text

b.VENT PIPE FLASHING: 8 OZ./SQ. FT.VENT PIPE FLASHING: 8 OZ./SQ. FT.

AutoCAD SHX Text

2.ZINC-COATED STEEL SHEET: ASTM A 653/A 653M, WITH 0.20 PERCENT COPPER CONTENT AND 0.04-INCH ZINC-COATED STEEL SHEET: ASTM A 653/A 653M, WITH 0.20 PERCENT COPPER CONTENT AND 0.04-INCH STEEL SHEET: ASTM A 653/A 653M, WITH 0.20 PERCENT COPPER CONTENT AND 0.04-INCH STEEL SHEET: ASTM A 653/A 653M, WITH 0.20 PERCENT COPPER CONTENT AND 0.04-INCH SHEET: ASTM A 653/A 653M, WITH 0.20 PERCENT COPPER CONTENT AND 0.04-INCH SHEET: ASTM A 653/A 653M, WITH 0.20 PERCENT COPPER CONTENT AND 0.04-INCH ASTM A 653/A 653M, WITH 0.20 PERCENT COPPER CONTENT AND 0.04-INCH ASTM A 653/A 653M, WITH 0.20 PERCENT COPPER CONTENT AND 0.04-INCH A 653/A 653M, WITH 0.20 PERCENT COPPER CONTENT AND 0.04-INCH A 653/A 653M, WITH 0.20 PERCENT COPPER CONTENT AND 0.04-INCH 653/A 653M, WITH 0.20 PERCENT COPPER CONTENT AND 0.04-INCH 653/A 653M, WITH 0.20 PERCENT COPPER CONTENT AND 0.04-INCH 653M, WITH 0.20 PERCENT COPPER CONTENT AND 0.04-INCH 653M, WITH 0.20 PERCENT COPPER CONTENT AND 0.04-INCH WITH 0.20 PERCENT COPPER CONTENT AND 0.04-INCH WITH 0.20 PERCENT COPPER CONTENT AND 0.04-INCH 0.20 PERCENT COPPER CONTENT AND 0.04-INCH 0.20 PERCENT COPPER CONTENT AND 0.04-INCH PERCENT COPPER CONTENT AND 0.04-INCH PERCENT COPPER CONTENT AND 0.04-INCH COPPER CONTENT AND 0.04-INCH COPPER CONTENT AND 0.04-INCH CONTENT AND 0.04-INCH CONTENT AND 0.04-INCH AND 0.04-INCH AND 0.04-INCH 0.04-INCH 0.04-INCH MINIMUM THICKNESS, UNLESS OTHERWISE INDICATED. INCLUDE G90 HOT-DIP GALVANIZED, THICKNESS, UNLESS OTHERWISE INDICATED. INCLUDE G90 HOT-DIP GALVANIZED, THICKNESS, UNLESS OTHERWISE INDICATED. INCLUDE G90 HOT-DIP GALVANIZED, UNLESS OTHERWISE INDICATED. INCLUDE G90 HOT-DIP GALVANIZED, UNLESS OTHERWISE INDICATED. INCLUDE G90 HOT-DIP GALVANIZED, OTHERWISE INDICATED. INCLUDE G90 HOT-DIP GALVANIZED, OTHERWISE INDICATED. INCLUDE G90 HOT-DIP GALVANIZED, INDICATED. INCLUDE G90 HOT-DIP GALVANIZED, INDICATED. INCLUDE G90 HOT-DIP GALVANIZED, INCLUDE G90 HOT-DIP GALVANIZED, INCLUDE G90 HOT-DIP GALVANIZED, G90 HOT-DIP GALVANIZED, G90 HOT-DIP GALVANIZED, HOT-DIP GALVANIZED, HOT-DIP GALVANIZED, GALVANIZED, GALVANIZED, MILL-PHOSPHATIZED FINISH FOR PAINTING IF INDICATED.

AutoCAD SHX Text

3.ELASTIC MEMBRANE SHEET: ASTM D 4068, FLEXIBLE, CHLORINATED POLYETHYLENE, 40-MIL MINIMUM ELASTIC MEMBRANE SHEET: ASTM D 4068, FLEXIBLE, CHLORINATED POLYETHYLENE, 40-MIL MINIMUM MEMBRANE SHEET: ASTM D 4068, FLEXIBLE, CHLORINATED POLYETHYLENE, 40-MIL MINIMUM MEMBRANE SHEET: ASTM D 4068, FLEXIBLE, CHLORINATED POLYETHYLENE, 40-MIL MINIMUM SHEET: ASTM D 4068, FLEXIBLE, CHLORINATED POLYETHYLENE, 40-MIL MINIMUM SHEET: ASTM D 4068, FLEXIBLE, CHLORINATED POLYETHYLENE, 40-MIL MINIMUM ASTM D 4068, FLEXIBLE, CHLORINATED POLYETHYLENE, 40-MIL MINIMUM ASTM D 4068, FLEXIBLE, CHLORINATED POLYETHYLENE, 40-MIL MINIMUM D 4068, FLEXIBLE, CHLORINATED POLYETHYLENE, 40-MIL MINIMUM D 4068, FLEXIBLE, CHLORINATED POLYETHYLENE, 40-MIL MINIMUM 4068, FLEXIBLE, CHLORINATED POLYETHYLENE, 40-MIL MINIMUM 4068, FLEXIBLE, CHLORINATED POLYETHYLENE, 40-MIL MINIMUM FLEXIBLE, CHLORINATED POLYETHYLENE, 40-MIL MINIMUM FLEXIBLE, CHLORINATED POLYETHYLENE, 40-MIL MINIMUM CHLORINATED POLYETHYLENE, 40-MIL MINIMUM CHLORINATED POLYETHYLENE, 40-MIL MINIMUM POLYETHYLENE, 40-MIL MINIMUM POLYETHYLENE, 40-MIL MINIMUM 40-MIL MINIMUM 40-MIL MINIMUM MINIMUM MINIMUM THICKNESS.

AutoCAD SHX Text

4.FASTENERS: METAL COMPATIBLE WITH MATERIAL AND SUBSTRATE BEING FASTENED.FASTENERS: METAL COMPATIBLE WITH MATERIAL AND SUBSTRATE BEING FASTENED.

AutoCAD SHX Text

5.METAL ACCESSORIES: SHEET METAL STRIPS, CLAMPS, ANCHORING DEVICES, AND SIMILAR ACCESSORY UNITS METAL ACCESSORIES: SHEET METAL STRIPS, CLAMPS, ANCHORING DEVICES, AND SIMILAR ACCESSORY UNITS ACCESSORIES: SHEET METAL STRIPS, CLAMPS, ANCHORING DEVICES, AND SIMILAR ACCESSORY UNITS ACCESSORIES: SHEET METAL STRIPS, CLAMPS, ANCHORING DEVICES, AND SIMILAR ACCESSORY UNITS SHEET METAL STRIPS, CLAMPS, ANCHORING DEVICES, AND SIMILAR ACCESSORY UNITS SHEET METAL STRIPS, CLAMPS, ANCHORING DEVICES, AND SIMILAR ACCESSORY UNITS METAL STRIPS, CLAMPS, ANCHORING DEVICES, AND SIMILAR ACCESSORY UNITS METAL STRIPS, CLAMPS, ANCHORING DEVICES, AND SIMILAR ACCESSORY UNITS STRIPS, CLAMPS, ANCHORING DEVICES, AND SIMILAR ACCESSORY UNITS STRIPS, CLAMPS, ANCHORING DEVICES, AND SIMILAR ACCESSORY UNITS CLAMPS, ANCHORING DEVICES, AND SIMILAR ACCESSORY UNITS CLAMPS, ANCHORING DEVICES, AND SIMILAR ACCESSORY UNITS ANCHORING DEVICES, AND SIMILAR ACCESSORY UNITS ANCHORING DEVICES, AND SIMILAR ACCESSORY UNITS DEVICES, AND SIMILAR ACCESSORY UNITS DEVICES, AND SIMILAR ACCESSORY UNITS AND SIMILAR ACCESSORY UNITS AND SIMILAR ACCESSORY UNITS SIMILAR ACCESSORY UNITS SIMILAR ACCESSORY UNITS ACCESSORY UNITS ACCESSORY UNITS UNITS UNITS REQUIRED FOR INSTALLATION; MATCHING OR COMPATIBLE WITH MATERIAL BEING INSTALLED.

AutoCAD SHX Text

6.SOLDER: ASTM B 32, LEAD-FREE ALLOY.SOLDER: ASTM B 32, LEAD-FREE ALLOY.

AutoCAD SHX Text

7.BITUMINOUS COATING: SSPC-PAINT 12, SOLVENT-TYPE, BITUMINOUS MASTIC.BITUMINOUS COATING: SSPC-PAINT 12, SOLVENT-TYPE, BITUMINOUS MASTIC.

AutoCAD SHX Text

PLUMBING FIXTURES

AutoCAD SHX Text

A.SELECT COMBINATIONS OF FIXTURES AND TRIM, FAUCETS, FITTINGS, AND OTHER COMPONENTS THAT ARE SELECT COMBINATIONS OF FIXTURES AND TRIM, FAUCETS, FITTINGS, AND OTHER COMPONENTS THAT ARE COMBINATIONS OF FIXTURES AND TRIM, FAUCETS, FITTINGS, AND OTHER COMPONENTS THAT ARE COMBINATIONS OF FIXTURES AND TRIM, FAUCETS, FITTINGS, AND OTHER COMPONENTS THAT ARE OF FIXTURES AND TRIM, FAUCETS, FITTINGS, AND OTHER COMPONENTS THAT ARE OF FIXTURES AND TRIM, FAUCETS, FITTINGS, AND OTHER COMPONENTS THAT ARE FIXTURES AND TRIM, FAUCETS, FITTINGS, AND OTHER COMPONENTS THAT ARE FIXTURES AND TRIM, FAUCETS, FITTINGS, AND OTHER COMPONENTS THAT ARE AND TRIM, FAUCETS, FITTINGS, AND OTHER COMPONENTS THAT ARE AND TRIM, FAUCETS, FITTINGS, AND OTHER COMPONENTS THAT ARE TRIM, FAUCETS, FITTINGS, AND OTHER COMPONENTS THAT ARE TRIM, FAUCETS, FITTINGS, AND OTHER COMPONENTS THAT ARE FAUCETS, FITTINGS, AND OTHER COMPONENTS THAT ARE FAUCETS, FITTINGS, AND OTHER COMPONENTS THAT ARE FITTINGS, AND OTHER COMPONENTS THAT ARE FITTINGS, AND OTHER COMPONENTS THAT ARE AND OTHER COMPONENTS THAT ARE AND OTHER COMPONENTS THAT ARE OTHER COMPONENTS THAT ARE OTHER COMPONENTS THAT ARE COMPONENTS THAT ARE COMPONENTS THAT ARE THAT ARE THAT ARE ARE ARE COMPATIBLE.

AutoCAD SHX Text

B.REGULATORY REQUIREMENTS: COMPLY WITH REQUIREMENTS IN ICC A117.1, "ACCESSIBLE AND USABLE BUILDINGS REGULATORY REQUIREMENTS: COMPLY WITH REQUIREMENTS IN ICC A117.1, "ACCESSIBLE AND USABLE BUILDINGS REQUIREMENTS: COMPLY WITH REQUIREMENTS IN ICC A117.1, "ACCESSIBLE AND USABLE BUILDINGS REQUIREMENTS: COMPLY WITH REQUIREMENTS IN ICC A117.1, "ACCESSIBLE AND USABLE BUILDINGS COMPLY WITH REQUIREMENTS IN ICC A117.1, "ACCESSIBLE AND USABLE BUILDINGS COMPLY WITH REQUIREMENTS IN ICC A117.1, "ACCESSIBLE AND USABLE BUILDINGS WITH REQUIREMENTS IN ICC A117.1, "ACCESSIBLE AND USABLE BUILDINGS WITH REQUIREMENTS IN ICC A117.1, "ACCESSIBLE AND USABLE BUILDINGS REQUIREMENTS IN ICC A117.1, "ACCESSIBLE AND USABLE BUILDINGS REQUIREMENTS IN ICC A117.1, "ACCESSIBLE AND USABLE BUILDINGS IN ICC A117.1, "ACCESSIBLE AND USABLE BUILDINGS IN ICC A117.1, "ACCESSIBLE AND USABLE BUILDINGS ICC A117.1, "ACCESSIBLE AND USABLE BUILDINGS ICC A117.1, "ACCESSIBLE AND USABLE BUILDINGS A117.1, "ACCESSIBLE AND USABLE BUILDINGS A117.1, "ACCESSIBLE AND USABLE BUILDINGS "ACCESSIBLE AND USABLE BUILDINGS "ACCESSIBLE AND USABLE BUILDINGS AND USABLE BUILDINGS AND USABLE BUILDINGS USABLE BUILDINGS USABLE BUILDINGS BUILDINGS BUILDINGS AND FACILITIES" FOR PLUMBING FIXTURES FOR PEOPLE WITH DISABILITIES.

AutoCAD SHX Text

C.REGULATORY REQUIREMENTS: COMPLY WITH REQUIREMENTS IN PUBLIC LAW 102-486, "ENERGY POLICY ACT," REGULATORY REQUIREMENTS: COMPLY WITH REQUIREMENTS IN PUBLIC LAW 102-486, "ENERGY POLICY ACT," REQUIREMENTS: COMPLY WITH REQUIREMENTS IN PUBLIC LAW 102-486, "ENERGY POLICY ACT," REQUIREMENTS: COMPLY WITH REQUIREMENTS IN PUBLIC LAW 102-486, "ENERGY POLICY ACT," COMPLY WITH REQUIREMENTS IN PUBLIC LAW 102-486, "ENERGY POLICY ACT," COMPLY WITH REQUIREMENTS IN PUBLIC LAW 102-486, "ENERGY POLICY ACT," WITH REQUIREMENTS IN PUBLIC LAW 102-486, "ENERGY POLICY ACT," WITH REQUIREMENTS IN PUBLIC LAW 102-486, "ENERGY POLICY ACT," REQUIREMENTS IN PUBLIC LAW 102-486, "ENERGY POLICY ACT," REQUIREMENTS IN PUBLIC LAW 102-486, "ENERGY POLICY ACT," IN PUBLIC LAW 102-486, "ENERGY POLICY ACT," IN PUBLIC LAW 102-486, "ENERGY POLICY ACT," PUBLIC LAW 102-486, "ENERGY POLICY ACT," PUBLIC LAW 102-486, "ENERGY POLICY ACT," LAW 102-486, "ENERGY POLICY ACT," LAW 102-486, "ENERGY POLICY ACT," 102-486, "ENERGY POLICY ACT," 102-486, "ENERGY POLICY ACT," "ENERGY POLICY ACT," "ENERGY POLICY ACT," POLICY ACT," POLICY ACT," ACT," ACT," ABOUT WATER FLOW AND CONSUMPTION RATES FOR PLUMBING FIXTURES.

AutoCAD SHX Text

D.REGULATORY REQUIREMENTS: COMPLY WITH REQUIREMENTS IN PUBLIC LAW 111-380, "REDUCTION OF LEAD IN REGULATORY REQUIREMENTS: COMPLY WITH REQUIREMENTS IN PUBLIC LAW 111-380, "REDUCTION OF LEAD IN REQUIREMENTS: COMPLY WITH REQUIREMENTS IN PUBLIC LAW 111-380, "REDUCTION OF LEAD IN REQUIREMENTS: COMPLY WITH REQUIREMENTS IN PUBLIC LAW 111-380, "REDUCTION OF LEAD IN COMPLY WITH REQUIREMENTS IN PUBLIC LAW 111-380, "REDUCTION OF LEAD IN COMPLY WITH REQUIREMENTS IN PUBLIC LAW 111-380, "REDUCTION OF LEAD IN WITH REQUIREMENTS IN PUBLIC LAW 111-380, "REDUCTION OF LEAD IN WITH REQUIREMENTS IN PUBLIC LAW 111-380, "REDUCTION OF LEAD IN REQUIREMENTS IN PUBLIC LAW 111-380, "REDUCTION OF LEAD IN REQUIREMENTS IN PUBLIC LAW 111-380, "REDUCTION OF LEAD IN IN PUBLIC LAW 111-380, "REDUCTION OF LEAD IN IN PUBLIC LAW 111-380, "REDUCTION OF LEAD IN PUBLIC LAW 111-380, "REDUCTION OF LEAD IN PUBLIC LAW 111-380, "REDUCTION OF LEAD IN LAW 111-380, "REDUCTION OF LEAD IN LAW 111-380, "REDUCTION OF LEAD IN 111-380, "REDUCTION OF LEAD IN 111-380, "REDUCTION OF LEAD IN "REDUCTION OF LEAD IN "REDUCTION OF LEAD IN OF LEAD IN OF LEAD IN LEAD IN LEAD IN IN IN DRINKING WATER ACT," ABOUT LEAD CONTENT IN MATERIALS THAT WILL BE IN CONTACT WITH POTABLE WATER WATER ACT," ABOUT LEAD CONTENT IN MATERIALS THAT WILL BE IN CONTACT WITH POTABLE WATER WATER ACT," ABOUT LEAD CONTENT IN MATERIALS THAT WILL BE IN CONTACT WITH POTABLE WATER ACT," ABOUT LEAD CONTENT IN MATERIALS THAT WILL BE IN CONTACT WITH POTABLE WATER ACT," ABOUT LEAD CONTENT IN MATERIALS THAT WILL BE IN CONTACT WITH POTABLE WATER ABOUT LEAD CONTENT IN MATERIALS THAT WILL BE IN CONTACT WITH POTABLE WATER ABOUT LEAD CONTENT IN MATERIALS THAT WILL BE IN CONTACT WITH POTABLE WATER LEAD CONTENT IN MATERIALS THAT WILL BE IN CONTACT WITH POTABLE WATER LEAD CONTENT IN MATERIALS THAT WILL BE IN CONTACT WITH POTABLE WATER CONTENT IN MATERIALS THAT WILL BE IN CONTACT WITH POTABLE WATER CONTENT IN MATERIALS THAT WILL BE IN CONTACT WITH POTABLE WATER IN MATERIALS THAT WILL BE IN CONTACT WITH POTABLE WATER IN MATERIALS THAT WILL BE IN CONTACT WITH POTABLE WATER MATERIALS THAT WILL BE IN CONTACT WITH POTABLE WATER MATERIALS THAT WILL BE IN CONTACT WITH POTABLE WATER THAT WILL BE IN CONTACT WITH POTABLE WATER THAT WILL BE IN CONTACT WITH POTABLE WATER WILL BE IN CONTACT WITH POTABLE WATER WILL BE IN CONTACT WITH POTABLE WATER BE IN CONTACT WITH POTABLE WATER BE IN CONTACT WITH POTABLE WATER IN CONTACT WITH POTABLE WATER IN CONTACT WITH POTABLE WATER CONTACT WITH POTABLE WATER CONTACT WITH POTABLE WATER WITH POTABLE WATER WITH POTABLE WATER POTABLE WATER POTABLE WATER WATER WATER FOR HUMAN CONSUMPTION.

AutoCAD SHX Text

E.ACCEPTABLE PLUMBNG FIXTURES ARE SCHEDULED ON THE DRAWINGS. ACCEPTABLE PLUMBNG FIXTURES ARE SCHEDULED ON THE DRAWINGS.

AutoCAD SHX Text

F.FIXTURE SUPPLIES: CHROME-PLATED BRASS, LOOSE-KEY OR SCREWDRIVER ANGLE STOPS WITH BRASS STEMS, FIXTURE SUPPLIES: CHROME-PLATED BRASS, LOOSE-KEY OR SCREWDRIVER ANGLE STOPS WITH BRASS STEMS, SUPPLIES: CHROME-PLATED BRASS, LOOSE-KEY OR SCREWDRIVER ANGLE STOPS WITH BRASS STEMS, SUPPLIES: CHROME-PLATED BRASS, LOOSE-KEY OR SCREWDRIVER ANGLE STOPS WITH BRASS STEMS, CHROME-PLATED BRASS, LOOSE-KEY OR SCREWDRIVER ANGLE STOPS WITH BRASS STEMS, CHROME-PLATED BRASS, LOOSE-KEY OR SCREWDRIVER ANGLE STOPS WITH BRASS STEMS, CHROME-PLATED BRASS, LOOSE-KEY OR SCREWDRIVER ANGLE STOPS WITH BRASS STEMS, BRASS, LOOSE-KEY OR SCREWDRIVER ANGLE STOPS WITH BRASS STEMS, BRASS, LOOSE-KEY OR SCREWDRIVER ANGLE STOPS WITH BRASS STEMS, LOOSE-KEY OR SCREWDRIVER ANGLE STOPS WITH BRASS STEMS, LOOSE-KEY OR SCREWDRIVER ANGLE STOPS WITH BRASS STEMS, OR SCREWDRIVER ANGLE STOPS WITH BRASS STEMS, OR SCREWDRIVER ANGLE STOPS WITH BRASS STEMS, SCREWDRIVER ANGLE STOPS WITH BRASS STEMS, SCREWDRIVER ANGLE STOPS WITH BRASS STEMS, ANGLE STOPS WITH BRASS STEMS, ANGLE STOPS WITH BRASS STEMS, STOPS WITH BRASS STEMS, STOPS WITH BRASS STEMS, WITH BRASS STEMS, WITH BRASS STEMS, BRASS STEMS, BRASS STEMS, STEMS, STEMS, CHROME-PLATED COPPER RISERS, AND CHROME-PLATED WALL FLANGES.

AutoCAD SHX Text

1.MANUFACTURERS: BRASSCRAFT; A MASCO COMPANY | MCGUIRE MFG. CO., INC. | ANY OF THE APPROVED MANUFACTURERS: BRASSCRAFT; A MASCO COMPANY | MCGUIRE MFG. CO., INC. | ANY OF THE APPROVED BRASSCRAFT; A MASCO COMPANY | MCGUIRE MFG. CO., INC. | ANY OF THE APPROVED BRASSCRAFT; A MASCO COMPANY | MCGUIRE MFG. CO., INC. | ANY OF THE APPROVED BRASSCRAFT; A MASCO COMPANY | MCGUIRE MFG. CO., INC. | ANY OF THE APPROVED A MASCO COMPANY | MCGUIRE MFG. CO., INC. | ANY OF THE APPROVED A MASCO COMPANY | MCGUIRE MFG. CO., INC. | ANY OF THE APPROVED MASCO COMPANY | MCGUIRE MFG. CO., INC. | ANY OF THE APPROVED MASCO COMPANY | MCGUIRE MFG. CO., INC. | ANY OF THE APPROVED COMPANY | MCGUIRE MFG. CO., INC. | ANY OF THE APPROVED COMPANY | MCGUIRE MFG. CO., INC. | ANY OF THE APPROVED | MCGUIRE MFG. CO., INC. | ANY OF THE APPROVED | MCGUIRE MFG. CO., INC. | ANY OF THE APPROVED MCGUIRE MFG. CO., INC. | ANY OF THE APPROVED MCGUIRE MFG. CO., INC. | ANY OF THE APPROVED MFG. CO., INC. | ANY OF THE APPROVED MFG. CO., INC. | ANY OF THE APPROVED CO., INC. | ANY OF THE APPROVED CO., INC. | ANY OF THE APPROVED INC. | ANY OF THE APPROVED INC. | ANY OF THE APPROVED | ANY OF THE APPROVED | ANY OF THE APPROVED ANY OF THE APPROVED ANY OF THE APPROVED OF THE APPROVED OF THE APPROVED THE APPROVED THE APPROVED APPROVED APPROVED PLUMBING FIXTURE MANUFACTURERS.

AutoCAD SHX Text

G.PROTECTIVE SHIELDING PIPE COVERS (PSG-1): MANUFACTURED PLASTIC WRAPS FOR COVERING PLUMBING PROTECTIVE SHIELDING PIPE COVERS (PSG-1): MANUFACTURED PLASTIC WRAPS FOR COVERING PLUMBING SHIELDING PIPE COVERS (PSG-1): MANUFACTURED PLASTIC WRAPS FOR COVERING PLUMBING SHIELDING PIPE COVERS (PSG-1): MANUFACTURED PLASTIC WRAPS FOR COVERING PLUMBING PIPE COVERS (PSG-1): MANUFACTURED PLASTIC WRAPS FOR COVERING PLUMBING PIPE COVERS (PSG-1): MANUFACTURED PLASTIC WRAPS FOR COVERING PLUMBING COVERS (PSG-1): MANUFACTURED PLASTIC WRAPS FOR COVERING PLUMBING COVERS (PSG-1): MANUFACTURED PLASTIC WRAPS FOR COVERING PLUMBING (PSG-1): MANUFACTURED PLASTIC WRAPS FOR COVERING PLUMBING (PSG-1): MANUFACTURED PLASTIC WRAPS FOR COVERING PLUMBING MANUFACTURED PLASTIC WRAPS FOR COVERING PLUMBING MANUFACTURED PLASTIC WRAPS FOR COVERING PLUMBING MANUFACTURED PLASTIC WRAPS FOR COVERING PLUMBING PLASTIC WRAPS FOR COVERING PLUMBING PLASTIC WRAPS FOR COVERING PLUMBING WRAPS FOR COVERING PLUMBING WRAPS FOR COVERING PLUMBING FOR COVERING PLUMBING FOR COVERING PLUMBING COVERING PLUMBING COVERING PLUMBING PLUMBING PLUMBING FIXTURE HOT- AND COLD-WATER SUPPLIES AND TRAP AND DRAIN PIPING. COMPLY WITH AMERICANS WITH HOT- AND COLD-WATER SUPPLIES AND TRAP AND DRAIN PIPING. COMPLY WITH AMERICANS WITH HOT- AND COLD-WATER SUPPLIES AND TRAP AND DRAIN PIPING. COMPLY WITH AMERICANS WITH AND COLD-WATER SUPPLIES AND TRAP AND DRAIN PIPING. COMPLY WITH AMERICANS WITH AND COLD-WATER SUPPLIES AND TRAP AND DRAIN PIPING. COMPLY WITH AMERICANS WITH COLD-WATER SUPPLIES AND TRAP AND DRAIN PIPING. COMPLY WITH AMERICANS WITH COLD-WATER SUPPLIES AND TRAP AND DRAIN PIPING. COMPLY WITH AMERICANS WITH SUPPLIES AND TRAP AND DRAIN PIPING. COMPLY WITH AMERICANS WITH SUPPLIES AND TRAP AND DRAIN PIPING. COMPLY WITH AMERICANS WITH AND TRAP AND DRAIN PIPING. COMPLY WITH AMERICANS WITH AND TRAP AND DRAIN PIPING. COMPLY WITH AMERICANS WITH TRAP AND DRAIN PIPING. COMPLY WITH AMERICANS WITH TRAP AND DRAIN PIPING. COMPLY WITH AMERICANS WITH AND DRAIN PIPING. COMPLY WITH AMERICANS WITH AND DRAIN PIPING. COMPLY WITH AMERICANS WITH DRAIN PIPING. COMPLY WITH AMERICANS WITH DRAIN PIPING. COMPLY WITH AMERICANS WITH PIPING. COMPLY WITH AMERICANS WITH PIPING. COMPLY WITH AMERICANS WITH COMPLY WITH AMERICANS WITH COMPLY WITH AMERICANS WITH WITH AMERICANS WITH WITH AMERICANS WITH AMERICANS WITH AMERICANS WITH WITH WITH DISABILITIES ACT (ADA) REQUIREMENTS.

AutoCAD SHX Text

1.MANUFACTURERS: ENGINEERED BRASS CO. | INSUL-TECT PRODUCTS CO.; A SUBSIDIARY OF MVG MOLDED MANUFACTURERS: ENGINEERED BRASS CO. | INSUL-TECT PRODUCTS CO.; A SUBSIDIARY OF MVG MOLDED ENGINEERED BRASS CO. | INSUL-TECT PRODUCTS CO.; A SUBSIDIARY OF MVG MOLDED ENGINEERED BRASS CO. | INSUL-TECT PRODUCTS CO.; A SUBSIDIARY OF MVG MOLDED ENGINEERED BRASS CO. | INSUL-TECT PRODUCTS CO.; A SUBSIDIARY OF MVG MOLDED BRASS CO. | INSUL-TECT PRODUCTS CO.; A SUBSIDIARY OF MVG MOLDED BRASS CO. | INSUL-TECT PRODUCTS CO.; A SUBSIDIARY OF MVG MOLDED CO. | INSUL-TECT PRODUCTS CO.; A SUBSIDIARY OF MVG MOLDED CO. | INSUL-TECT PRODUCTS CO.; A SUBSIDIARY OF MVG MOLDED | INSUL-TECT PRODUCTS CO.; A SUBSIDIARY OF MVG MOLDED | INSUL-TECT PRODUCTS CO.; A SUBSIDIARY OF MVG MOLDED INSUL-TECT PRODUCTS CO.; A SUBSIDIARY OF MVG MOLDED INSUL-TECT PRODUCTS CO.; A SUBSIDIARY OF MVG MOLDED PRODUCTS CO.; A SUBSIDIARY OF MVG MOLDED PRODUCTS CO.; A SUBSIDIARY OF MVG MOLDED CO.; A SUBSIDIARY OF MVG MOLDED CO.; A SUBSIDIARY OF MVG MOLDED A SUBSIDIARY OF MVG MOLDED A SUBSIDIARY OF MVG MOLDED SUBSIDIARY OF MVG MOLDED SUBSIDIARY OF MVG MOLDED OF MVG MOLDED OF MVG MOLDED MVG MOLDED MVG MOLDED MOLDED MOLDED PRODUCTS | MCGUIRE MANUFACTURING CO., INC. | PLUMBEREX SPECIALTY PRODUCTS INC. | TCI PRODUCTS; | MCGUIRE MANUFACTURING CO., INC. | PLUMBEREX SPECIALTY PRODUCTS INC. | TCI PRODUCTS; | MCGUIRE MANUFACTURING CO., INC. | PLUMBEREX SPECIALTY PRODUCTS INC. | TCI PRODUCTS; MCGUIRE MANUFACTURING CO., INC. | PLUMBEREX SPECIALTY PRODUCTS INC. | TCI PRODUCTS; MCGUIRE MANUFACTURING CO., INC. | PLUMBEREX SPECIALTY PRODUCTS INC. | TCI PRODUCTS; MANUFACTURING CO., INC. | PLUMBEREX SPECIALTY PRODUCTS INC. | TCI PRODUCTS; MANUFACTURING CO., INC. | PLUMBEREX SPECIALTY PRODUCTS INC. | TCI PRODUCTS; CO., INC. | PLUMBEREX SPECIALTY PRODUCTS INC. | TCI PRODUCTS; CO., INC. | PLUMBEREX SPECIALTY PRODUCTS INC. | TCI PRODUCTS; INC. | PLUMBEREX SPECIALTY PRODUCTS INC. | TCI PRODUCTS; INC. | PLUMBEREX SPECIALTY PRODUCTS INC. | TCI PRODUCTS; | PLUMBEREX SPECIALTY PRODUCTS INC. | TCI PRODUCTS; | PLUMBEREX SPECIALTY PRODUCTS INC. | TCI PRODUCTS; PLUMBEREX SPECIALTY PRODUCTS INC. | TCI PRODUCTS; PLUMBEREX SPECIALTY PRODUCTS INC. | TCI PRODUCTS; SPECIALTY PRODUCTS INC. | TCI PRODUCTS; SPECIALTY PRODUCTS INC. | TCI PRODUCTS; PRODUCTS INC. | TCI PRODUCTS; PRODUCTS INC. | TCI PRODUCTS; INC. | TCI PRODUCTS; INC. | TCI PRODUCTS; | TCI PRODUCTS; | TCI PRODUCTS; TCI PRODUCTS; TCI PRODUCTS; PRODUCTS; PRODUCTS; SG-200BV | TRUEBRO, INC. | ZURN PLUMBING PRODUCTS GROUP; TUBULAR BRASS PLUMBING PRODUCTS | TRUEBRO, INC. | ZURN PLUMBING PRODUCTS GROUP; TUBULAR BRASS PLUMBING PRODUCTS | TRUEBRO, INC. | ZURN PLUMBING PRODUCTS GROUP; TUBULAR BRASS PLUMBING PRODUCTS TRUEBRO, INC. | ZURN PLUMBING PRODUCTS GROUP; TUBULAR BRASS PLUMBING PRODUCTS TRUEBRO, INC. | ZURN PLUMBING PRODUCTS GROUP; TUBULAR BRASS PLUMBING PRODUCTS INC. | ZURN PLUMBING PRODUCTS GROUP; TUBULAR BRASS PLUMBING PRODUCTS INC. | ZURN PLUMBING PRODUCTS GROUP; TUBULAR BRASS PLUMBING PRODUCTS | ZURN PLUMBING PRODUCTS GROUP; TUBULAR BRASS PLUMBING PRODUCTS | ZURN PLUMBING PRODUCTS GROUP; TUBULAR BRASS PLUMBING PRODUCTS ZURN PLUMBING PRODUCTS GROUP; TUBULAR BRASS PLUMBING PRODUCTS ZURN PLUMBING PRODUCTS GROUP; TUBULAR BRASS PLUMBING PRODUCTS PLUMBING PRODUCTS GROUP; TUBULAR BRASS PLUMBING PRODUCTS PLUMBING PRODUCTS GROUP; TUBULAR BRASS PLUMBING PRODUCTS PRODUCTS GROUP; TUBULAR BRASS PLUMBING PRODUCTS PRODUCTS GROUP; TUBULAR BRASS PLUMBING PRODUCTS GROUP; TUBULAR BRASS PLUMBING PRODUCTS GROUP; TUBULAR BRASS PLUMBING PRODUCTS TUBULAR BRASS PLUMBING PRODUCTS TUBULAR BRASS PLUMBING PRODUCTS BRASS PLUMBING PRODUCTS BRASS PLUMBING PRODUCTS PLUMBING PRODUCTS PLUMBING PRODUCTS PRODUCTS PRODUCTS OPERATION.

AutoCAD SHX Text

COMMON WORK RESULTS FOR HVAC

AutoCAD SHX Text

A.ENVIRONMENTAL REQUIREMENTS: DO NOT OPERATE EQUIPMENT FOR ANY PURPOSE, TEMPORARY OR ENVIRONMENTAL REQUIREMENTS: DO NOT OPERATE EQUIPMENT FOR ANY PURPOSE, TEMPORARY OR REQUIREMENTS: DO NOT OPERATE EQUIPMENT FOR ANY PURPOSE, TEMPORARY OR REQUIREMENTS: DO NOT OPERATE EQUIPMENT FOR ANY PURPOSE, TEMPORARY OR DO NOT OPERATE EQUIPMENT FOR ANY PURPOSE, TEMPORARY OR DO NOT OPERATE EQUIPMENT FOR ANY PURPOSE, TEMPORARY OR DO NOT OPERATE EQUIPMENT FOR ANY PURPOSE, TEMPORARY OR NOT OPERATE EQUIPMENT FOR ANY PURPOSE, TEMPORARY OR NOT OPERATE EQUIPMENT FOR ANY PURPOSE, TEMPORARY OR OPERATE EQUIPMENT FOR ANY PURPOSE, TEMPORARY OR OPERATE EQUIPMENT FOR ANY PURPOSE, TEMPORARY OR EQUIPMENT FOR ANY PURPOSE, TEMPORARY OR EQUIPMENT FOR ANY PURPOSE, TEMPORARY OR FOR ANY PURPOSE, TEMPORARY OR FOR ANY PURPOSE, TEMPORARY OR ANY PURPOSE, TEMPORARY OR ANY PURPOSE, TEMPORARY OR PURPOSE, TEMPORARY OR PURPOSE, TEMPORARY OR TEMPORARY OR TEMPORARY OR OR OR PERMANENT, UNTIL DUCTWORK IS CLEAN, FILTERS ARE IN PLACE, BEARINGS LUBRICATED, AND FAN HAS BEEN UNTIL DUCTWORK IS CLEAN, FILTERS ARE IN PLACE, BEARINGS LUBRICATED, AND FAN HAS BEEN UNTIL DUCTWORK IS CLEAN, FILTERS ARE IN PLACE, BEARINGS LUBRICATED, AND FAN HAS BEEN DUCTWORK IS CLEAN, FILTERS ARE IN PLACE, BEARINGS LUBRICATED, AND FAN HAS BEEN DUCTWORK IS CLEAN, FILTERS ARE IN PLACE, BEARINGS LUBRICATED, AND FAN HAS BEEN IS CLEAN, FILTERS ARE IN PLACE, BEARINGS LUBRICATED, AND FAN HAS BEEN IS CLEAN, FILTERS ARE IN PLACE, BEARINGS LUBRICATED, AND FAN HAS BEEN CLEAN, FILTERS ARE IN PLACE, BEARINGS LUBRICATED, AND FAN HAS BEEN CLEAN, FILTERS ARE IN PLACE, BEARINGS LUBRICATED, AND FAN HAS BEEN FILTERS ARE IN PLACE, BEARINGS LUBRICATED, AND FAN HAS BEEN FILTERS ARE IN PLACE, BEARINGS LUBRICATED, AND FAN HAS BEEN ARE IN PLACE, BEARINGS LUBRICATED, AND FAN HAS BEEN ARE IN PLACE, BEARINGS LUBRICATED, AND FAN HAS BEEN IN PLACE, BEARINGS LUBRICATED, AND FAN HAS BEEN IN PLACE, BEARINGS LUBRICATED, AND FAN HAS BEEN PLACE, BEARINGS LUBRICATED, AND FAN HAS BEEN PLACE, BEARINGS LUBRICATED, AND FAN HAS BEEN BEARINGS LUBRICATED, AND FAN HAS BEEN BEARINGS LUBRICATED, AND FAN HAS BEEN LUBRICATED, AND FAN HAS BEEN LUBRICATED, AND FAN HAS BEEN AND FAN HAS BEEN AND FAN HAS BEEN FAN HAS BEEN FAN HAS BEEN HAS BEEN HAS BEEN BEEN BEEN TEST RUN UNDER OBSERVATION.

AutoCAD SHX Text

B.FAN POWER TRANSMISSION: V-BELT TYPE FAN DRIVES: IN ACCORDANCE WITH ENGINEERING STANDARD FAN POWER TRANSMISSION: V-BELT TYPE FAN DRIVES: IN ACCORDANCE WITH ENGINEERING STANDARD POWER TRANSMISSION: V-BELT TYPE FAN DRIVES: IN ACCORDANCE WITH ENGINEERING STANDARD POWER TRANSMISSION: V-BELT TYPE FAN DRIVES: IN ACCORDANCE WITH ENGINEERING STANDARD TRANSMISSION: V-BELT TYPE FAN DRIVES: IN ACCORDANCE WITH ENGINEERING STANDARD TRANSMISSION: V-BELT TYPE FAN DRIVES: IN ACCORDANCE WITH ENGINEERING STANDARD V-BELT TYPE FAN DRIVES: IN ACCORDANCE WITH ENGINEERING STANDARD V-BELT TYPE FAN DRIVES: IN ACCORDANCE WITH ENGINEERING STANDARD V-BELT TYPE FAN DRIVES: IN ACCORDANCE WITH ENGINEERING STANDARD TYPE FAN DRIVES: IN ACCORDANCE WITH ENGINEERING STANDARD TYPE FAN DRIVES: IN ACCORDANCE WITH ENGINEERING STANDARD FAN DRIVES: IN ACCORDANCE WITH ENGINEERING STANDARD FAN DRIVES: IN ACCORDANCE WITH ENGINEERING STANDARD DRIVES: IN ACCORDANCE WITH ENGINEERING STANDARD DRIVES: IN ACCORDANCE WITH ENGINEERING STANDARD IN ACCORDANCE WITH ENGINEERING STANDARD IN ACCORDANCE WITH ENGINEERING STANDARD ACCORDANCE WITH ENGINEERING STANDARD ACCORDANCE WITH ENGINEERING STANDARD WITH ENGINEERING STANDARD WITH ENGINEERING STANDARD ENGINEERING STANDARD ENGINEERING STANDARD STANDARD STANDARD SPECIFICATION FOR DRIVES USING MULTIPLE V-BELTS, SPONSORED BY THE MECHANICAL POWER TRANSMISSION FOR DRIVES USING MULTIPLE V-BELTS, SPONSORED BY THE MECHANICAL POWER TRANSMISSION FOR DRIVES USING MULTIPLE V-BELTS, SPONSORED BY THE MECHANICAL POWER TRANSMISSION DRIVES USING MULTIPLE V-BELTS, SPONSORED BY THE MECHANICAL POWER TRANSMISSION DRIVES USING MULTIPLE V-BELTS, SPONSORED BY THE MECHANICAL POWER TRANSMISSION USING MULTIPLE V-BELTS, SPONSORED BY THE MECHANICAL POWER TRANSMISSION USING MULTIPLE V-BELTS, SPONSORED BY THE MECHANICAL POWER TRANSMISSION MULTIPLE V-BELTS, SPONSORED BY THE MECHANICAL POWER TRANSMISSION MULTIPLE V-BELTS, SPONSORED BY THE MECHANICAL POWER TRANSMISSION V-BELTS, SPONSORED BY THE MECHANICAL POWER TRANSMISSION V-BELTS, SPONSORED BY THE MECHANICAL POWER TRANSMISSION SPONSORED BY THE MECHANICAL POWER TRANSMISSION SPONSORED BY THE MECHANICAL POWER TRANSMISSION BY THE MECHANICAL POWER TRANSMISSION BY THE MECHANICAL POWER TRANSMISSION THE MECHANICAL POWER TRANSMISSION THE MECHANICAL POWER TRANSMISSION MECHANICAL POWER TRANSMISSION MECHANICAL POWER TRANSMISSION POWER TRANSMISSION POWER TRANSMISSION TRANSMISSION TRANSMISSION ASSOCIATION AND THE RUBBER MANUFACTURER'S ASSOCIATION.

AutoCAD SHX Text

1.MANUFACTURERS: EMERSON POWER TRANSMISSION; BROWNING | ROCKWELL AUTOMATION; DODGE | T.B. MANUFACTURERS: EMERSON POWER TRANSMISSION; BROWNING | ROCKWELL AUTOMATION; DODGE | T.B. EMERSON POWER TRANSMISSION; BROWNING | ROCKWELL AUTOMATION; DODGE | T.B. EMERSON POWER TRANSMISSION; BROWNING | ROCKWELL AUTOMATION; DODGE | T.B. POWER TRANSMISSION; BROWNING | ROCKWELL AUTOMATION; DODGE | T.B. POWER TRANSMISSION; BROWNING | ROCKWELL AUTOMATION; DODGE | T.B. TRANSMISSION; BROWNING | ROCKWELL AUTOMATION; DODGE | T.B. TRANSMISSION; BROWNING | ROCKWELL AUTOMATION; DODGE | T.B. BROWNING | ROCKWELL AUTOMATION; DODGE | T.B. BROWNING | ROCKWELL AUTOMATION; DODGE | T.B. | ROCKWELL AUTOMATION; DODGE | T.B. | ROCKWELL AUTOMATION; DODGE | T.B. ROCKWELL AUTOMATION; DODGE | T.B. ROCKWELL AUTOMATION; DODGE | T.B. AUTOMATION; DODGE | T.B. AUTOMATION; DODGE | T.B. DODGE | T.B. DODGE | T.B. | T.B. | T.B. T.B. T.B. WOOD'S INCORPORATED.

AutoCAD SHX Text

C.NOTCHED OR COGGED STYLE, ENDLESS TYPE, OF DACRON REINFORCED ELASTOMER CONSTRUCTION, WITH NOTCHED OR COGGED STYLE, ENDLESS TYPE, OF DACRON REINFORCED ELASTOMER CONSTRUCTION, WITH OR COGGED STYLE, ENDLESS TYPE, OF DACRON REINFORCED ELASTOMER CONSTRUCTION, WITH OR COGGED STYLE, ENDLESS TYPE, OF DACRON REINFORCED ELASTOMER CONSTRUCTION, WITH COGGED STYLE, ENDLESS TYPE, OF DACRON REINFORCED ELASTOMER CONSTRUCTION, WITH COGGED STYLE, ENDLESS TYPE, OF DACRON REINFORCED ELASTOMER CONSTRUCTION, WITH STYLE, ENDLESS TYPE, OF DACRON REINFORCED ELASTOMER CONSTRUCTION, WITH STYLE, ENDLESS TYPE, OF DACRON REINFORCED ELASTOMER CONSTRUCTION, WITH ENDLESS TYPE, OF DACRON REINFORCED ELASTOMER CONSTRUCTION, WITH ENDLESS TYPE, OF DACRON REINFORCED ELASTOMER CONSTRUCTION, WITH TYPE, OF DACRON REINFORCED ELASTOMER CONSTRUCTION, WITH TYPE, OF DACRON REINFORCED ELASTOMER CONSTRUCTION, WITH OF DACRON REINFORCED ELASTOMER CONSTRUCTION, WITH OF DACRON REINFORCED ELASTOMER CONSTRUCTION, WITH DACRON REINFORCED ELASTOMER CONSTRUCTION, WITH DACRON REINFORCED ELASTOMER CONSTRUCTION, WITH REINFORCED ELASTOMER CONSTRUCTION, WITH REINFORCED ELASTOMER CONSTRUCTION, WITH ELASTOMER CONSTRUCTION, WITH ELASTOMER CONSTRUCTION, WITH CONSTRUCTION, WITH CONSTRUCTION, WITH WITH WITH CROSS-SECTION TO SUIT SHEAVE GROOVES.

AutoCAD SHX Text

1.MANUFACTURERS: EMERSON POWER TRANSMISSION; BROWNING; AX, BX, AND CX SERIES AND 3VX AND 5VX MANUFACTURERS: EMERSON POWER TRANSMISSION; BROWNING; AX, BX, AND CX SERIES AND 3VX AND 5VX EMERSON POWER TRANSMISSION; BROWNING; AX, BX, AND CX SERIES AND 3VX AND 5VX EMERSON POWER TRANSMISSION; BROWNING; AX, BX, AND CX SERIES AND 3VX AND 5VX POWER TRANSMISSION; BROWNING; AX, BX, AND CX SERIES AND 3VX AND 5VX POWER TRANSMISSION; BROWNING; AX, BX, AND CX SERIES AND 3VX AND 5VX TRANSMISSION; BROWNING; AX, BX, AND CX SERIES AND 3VX AND 5VX TRANSMISSION; BROWNING; AX, BX, AND CX SERIES AND 3VX AND 5VX BROWNING; AX, BX, AND CX SERIES AND 3VX AND 5VX BROWNING; AX, BX, AND CX SERIES AND 3VX AND 5VX AX, BX, AND CX SERIES AND 3VX AND 5VX AX, BX, AND CX SERIES AND 3VX AND 5VX BX, AND CX SERIES AND 3VX AND 5VX BX, AND CX SERIES AND 3VX AND 5VX AND CX SERIES AND 3VX AND 5VX AND CX SERIES AND 3VX AND 5VX CX SERIES AND 3VX AND 5VX CX SERIES AND 3VX AND 5VX SERIES AND 3VX AND 5VX SERIES AND 3VX AND 5VX AND 3VX AND 5VX AND 3VX AND 5VX 3VX AND 5VX 3VX AND 5VX AND 5VX AND 5VX 5VX 5VX SERIES | ROCKWELL AUTOMATION; DODGE; CLASSIC COG AND NARROW COG V-BELTS | T.B. WOOD'S | ROCKWELL AUTOMATION; DODGE; CLASSIC COG AND NARROW COG V-BELTS | T.B. WOOD'S | ROCKWELL AUTOMATION; DODGE; CLASSIC COG AND NARROW COG V-BELTS | T.B. WOOD'S ROCKWELL AUTOMATION; DODGE; CLASSIC COG AND NARROW COG V-BELTS | T.B. WOOD'S ROCKWELL AUTOMATION; DODGE; CLASSIC COG AND NARROW COG V-BELTS | T.B. WOOD'S AUTOMATION; DODGE; CLASSIC COG AND NARROW COG V-BELTS | T.B. WOOD'S AUTOMATION; DODGE; CLASSIC COG AND NARROW COG V-BELTS | T.B. WOOD'S DODGE; CLASSIC COG AND NARROW COG V-BELTS | T.B. WOOD'S DODGE; CLASSIC COG AND NARROW COG V-BELTS | T.B. WOOD'S CLASSIC COG AND NARROW COG V-BELTS | T.B. WOOD'S CLASSIC COG AND NARROW COG V-BELTS | T.B. WOOD'S COG AND NARROW COG V-BELTS | T.B. WOOD'S COG AND NARROW COG V-BELTS | T.B. WOOD'S AND NARROW COG V-BELTS | T.B. WOOD'S AND NARROW COG V-BELTS | T.B. WOOD'S NARROW COG V-BELTS | T.B. WOOD'S NARROW COG V-BELTS | T.B. WOOD'S COG V-BELTS | T.B. WOOD'S COG V-BELTS | T.B. WOOD'S V-BELTS | T.B. WOOD'S V-BELTS | T.B. WOOD'S | T.B. WOOD'S | T.B. WOOD'S T.B. WOOD'S T.B. WOOD'S WOOD'S WOOD'S INCORPORATED; CLASSICAL COG AND NARROW COG V-BELTS.

AutoCAD SHX Text

D.V-BELT DRIVE MOTOR BASES: PROVIDE FOR ADJUSTMENT OF BOTH BELT TENSION AND ALIGNMENT.V-BELT DRIVE MOTOR BASES: PROVIDE FOR ADJUSTMENT OF BOTH BELT TENSION AND ALIGNMENT.

AutoCAD SHX Text

E.BELT DRIVE GUARDS: ANSI AND OSHA COMPLIANT WITH PROVISION FOR READILY VIEWING BELT TENSION AND BELT DRIVE GUARDS: ANSI AND OSHA COMPLIANT WITH PROVISION FOR READILY VIEWING BELT TENSION AND DRIVE GUARDS: ANSI AND OSHA COMPLIANT WITH PROVISION FOR READILY VIEWING BELT TENSION AND DRIVE GUARDS: ANSI AND OSHA COMPLIANT WITH PROVISION FOR READILY VIEWING BELT TENSION AND GUARDS: ANSI AND OSHA COMPLIANT WITH PROVISION FOR READILY VIEWING BELT TENSION AND GUARDS: ANSI AND OSHA COMPLIANT WITH PROVISION FOR READILY VIEWING BELT TENSION AND ANSI AND OSHA COMPLIANT WITH PROVISION FOR READILY VIEWING BELT TENSION AND ANSI AND OSHA COMPLIANT WITH PROVISION FOR READILY VIEWING BELT TENSION AND ANSI AND OSHA COMPLIANT WITH PROVISION FOR READILY VIEWING BELT TENSION AND AND OSHA COMPLIANT WITH PROVISION FOR READILY VIEWING BELT TENSION AND AND OSHA COMPLIANT WITH PROVISION FOR READILY VIEWING BELT TENSION AND OSHA COMPLIANT WITH PROVISION FOR READILY VIEWING BELT TENSION AND OSHA COMPLIANT WITH PROVISION FOR READILY VIEWING BELT TENSION AND COMPLIANT WITH PROVISION FOR READILY VIEWING BELT TENSION AND COMPLIANT WITH PROVISION FOR READILY VIEWING BELT TENSION AND WITH PROVISION FOR READILY VIEWING BELT TENSION AND WITH PROVISION FOR READILY VIEWING BELT TENSION AND PROVISION FOR READILY VIEWING BELT TENSION AND PROVISION FOR READILY VIEWING BELT TENSION AND FOR READILY VIEWING BELT TENSION AND FOR READILY VIEWING BELT TENSION AND READILY VIEWING BELT TENSION AND READILY VIEWING BELT TENSION AND VIEWING BELT TENSION AND VIEWING BELT TENSION AND BELT TENSION AND BELT TENSION AND TENSION AND TENSION AND AND AND MEASURING SHAFT SPEEDS. GUARDS SHALL BE INSTALLED WITH QUICK RELEASE PINS.

AutoCAD SHX Text

F.SHEAVES: FURNISH SHEAVES OF MACHINED CAST IRON OR CARBON STEEL, BUSHING TYPE OF FIXED BORE, SHEAVES: FURNISH SHEAVES OF MACHINED CAST IRON OR CARBON STEEL, BUSHING TYPE OF FIXED BORE, FURNISH SHEAVES OF MACHINED CAST IRON OR CARBON STEEL, BUSHING TYPE OF FIXED BORE, FURNISH SHEAVES OF MACHINED CAST IRON OR CARBON STEEL, BUSHING TYPE OF FIXED BORE, FURNISH SHEAVES OF MACHINED CAST IRON OR CARBON STEEL, BUSHING TYPE OF FIXED BORE, SHEAVES OF MACHINED CAST IRON OR CARBON STEEL, BUSHING TYPE OF FIXED BORE, SHEAVES OF MACHINED CAST IRON OR CARBON STEEL, BUSHING TYPE OF FIXED BORE, OF MACHINED CAST IRON OR CARBON STEEL, BUSHING TYPE OF FIXED BORE, OF MACHINED CAST IRON OR CARBON STEEL, BUSHING TYPE OF FIXED BORE, MACHINED CAST IRON OR CARBON STEEL, BUSHING TYPE OF FIXED BORE, MACHINED CAST IRON OR CARBON STEEL, BUSHING TYPE OF FIXED BORE, CAST IRON OR CARBON STEEL, BUSHING TYPE OF FIXED BORE, CAST IRON OR CARBON STEEL, BUSHING TYPE OF FIXED BORE, IRON OR CARBON STEEL, BUSHING TYPE OF FIXED BORE, IRON OR CARBON STEEL, BUSHING TYPE OF FIXED BORE, OR CARBON STEEL, BUSHING TYPE OF FIXED BORE, OR CARBON STEEL, BUSHING TYPE OF FIXED BORE, CARBON STEEL, BUSHING TYPE OF FIXED BORE, CARBON STEEL, BUSHING TYPE OF FIXED BORE, STEEL, BUSHING TYPE OF FIXED BORE, STEEL, BUSHING TYPE OF FIXED BORE, BUSHING TYPE OF FIXED BORE, BUSHING TYPE OF FIXED BORE, TYPE OF FIXED BORE, TYPE OF FIXED BORE, OF FIXED BORE, OF FIXED BORE, FIXED BORE, FIXED BORE, BORE, BORE, SECURED TO THE SHAFT BY KEY AND KEYWAY.

AutoCAD SHX Text

G.AIR HANDLING SYSTEM BALANCING PROVISIONS:AIR HANDLING SYSTEM BALANCING PROVISIONS:

AutoCAD SHX Text

1.PROVIDE EXTRA SHEAVES, SIZED AS RECOMMENDED BY THE BALANCING AGENT, FOR THE ADJUSTMENT OF PROVIDE EXTRA SHEAVES, SIZED AS RECOMMENDED BY THE BALANCING AGENT, FOR THE ADJUSTMENT OF EXTRA SHEAVES, SIZED AS RECOMMENDED BY THE BALANCING AGENT, FOR THE ADJUSTMENT OF EXTRA SHEAVES, SIZED AS RECOMMENDED BY THE BALANCING AGENT, FOR THE ADJUSTMENT OF SHEAVES, SIZED AS RECOMMENDED BY THE BALANCING AGENT, FOR THE ADJUSTMENT OF SHEAVES, SIZED AS RECOMMENDED BY THE BALANCING AGENT, FOR THE ADJUSTMENT OF SIZED AS RECOMMENDED BY THE BALANCING AGENT, FOR THE ADJUSTMENT OF SIZED AS RECOMMENDED BY THE BALANCING AGENT, FOR THE ADJUSTMENT OF AS RECOMMENDED BY THE BALANCING AGENT, FOR THE ADJUSTMENT OF AS RECOMMENDED BY THE BALANCING AGENT, FOR THE ADJUSTMENT OF RECOMMENDED BY THE BALANCING AGENT, FOR THE ADJUSTMENT OF RECOMMENDED BY THE BALANCING AGENT, FOR THE ADJUSTMENT OF BY THE BALANCING AGENT, FOR THE ADJUSTMENT OF BY THE BALANCING AGENT, FOR THE ADJUSTMENT OF THE BALANCING AGENT, FOR THE ADJUSTMENT OF THE BALANCING AGENT, FOR THE ADJUSTMENT OF BALANCING AGENT, FOR THE ADJUSTMENT OF BALANCING AGENT, FOR THE ADJUSTMENT OF AGENT, FOR THE ADJUSTMENT OF AGENT, FOR THE ADJUSTMENT OF FOR THE ADJUSTMENT OF FOR THE ADJUSTMENT OF THE ADJUSTMENT OF THE ADJUSTMENT OF ADJUSTMENT OF ADJUSTMENT OF OF OF FAN SPEED FOR EACH AIR HANDLING SYSTEM DURING AIR QUANTITY BALANCING OPERATIONS. FURNISH SPEED FOR EACH AIR HANDLING SYSTEM DURING AIR QUANTITY BALANCING OPERATIONS. FURNISH SPEED FOR EACH AIR HANDLING SYSTEM DURING AIR QUANTITY BALANCING OPERATIONS. FURNISH FOR EACH AIR HANDLING SYSTEM DURING AIR QUANTITY BALANCING OPERATIONS. FURNISH FOR EACH AIR HANDLING SYSTEM DURING AIR QUANTITY BALANCING OPERATIONS. FURNISH EACH AIR HANDLING SYSTEM DURING AIR QUANTITY BALANCING OPERATIONS. FURNISH EACH AIR HANDLING SYSTEM DURING AIR QUANTITY BALANCING OPERATIONS. FURNISH AIR HANDLING SYSTEM DURING AIR QUANTITY BALANCING OPERATIONS. FURNISH AIR HANDLING SYSTEM DURING AIR QUANTITY BALANCING OPERATIONS. FURNISH HANDLING SYSTEM DURING AIR QUANTITY BALANCING OPERATIONS. FURNISH HANDLING SYSTEM DURING AIR QUANTITY BALANCING OPERATIONS. FURNISH SYSTEM DURING AIR QUANTITY BALANCING OPERATIONS. FURNISH SYSTEM DURING AIR QUANTITY BALANCING OPERATIONS. FURNISH DURING AIR QUANTITY BALANCING OPERATIONS. FURNISH DURING AIR QUANTITY BALANCING OPERATIONS. FURNISH AIR QUANTITY BALANCING OPERATIONS. FURNISH AIR QUANTITY BALANCING OPERATIONS. FURNISH QUANTITY BALANCING OPERATIONS. FURNISH QUANTITY BALANCING OPERATIONS. FURNISH BALANCING OPERATIONS. FURNISH BALANCING OPERATIONS. FURNISH OPERATIONS. FURNISH OPERATIONS. FURNISH FURNISH FURNISH SHEAVES AS SPECIFIED.

AutoCAD SHX Text

2.PROVIDE SHEAVES, SIZED AS RECOMMENDED BY THE BALANCING AGENT, FOR THE ADJUSTMENT OF FAN PROVIDE SHEAVES, SIZED AS RECOMMENDED BY THE BALANCING AGENT, FOR THE ADJUSTMENT OF FAN SHEAVES, SIZED AS RECOMMENDED BY THE BALANCING AGENT, FOR THE ADJUSTMENT OF FAN SHEAVES, SIZED AS RECOMMENDED BY THE BALANCING AGENT, FOR THE ADJUSTMENT OF FAN SIZED AS RECOMMENDED BY THE BALANCING AGENT, FOR THE ADJUSTMENT OF FAN SIZED AS RECOMMENDED BY THE BALANCING AGENT, FOR THE ADJUSTMENT OF FAN AS RECOMMENDED BY THE BALANCING AGENT, FOR THE ADJUSTMENT OF FAN AS RECOMMENDED BY THE BALANCING AGENT, FOR THE ADJUSTMENT OF FAN RECOMMENDED BY THE BALANCING AGENT, FOR THE ADJUSTMENT OF FAN RECOMMENDED BY THE BALANCING AGENT, FOR THE ADJUSTMENT OF FAN BY THE BALANCING AGENT, FOR THE ADJUSTMENT OF FAN BY THE BALANCING AGENT, FOR THE ADJUSTMENT OF FAN THE BALANCING AGENT, FOR THE ADJUSTMENT OF FAN THE BALANCING AGENT, FOR THE ADJUSTMENT OF FAN BALANCING AGENT, FOR THE ADJUSTMENT OF FAN BALANCING AGENT, FOR THE ADJUSTMENT OF FAN AGENT, FOR THE ADJUSTMENT OF FAN AGENT, FOR THE ADJUSTMENT OF FAN FOR THE ADJUSTMENT OF FAN FOR THE ADJUSTMENT OF FAN THE ADJUSTMENT OF FAN THE ADJUSTMENT OF FAN ADJUSTMENT OF FAN ADJUSTMENT OF FAN OF FAN OF FAN FAN FAN SPEED FOR EACH EXISTING AIR HANDLING SYSTEM REQUIRING REBALANCING DURING AIR QUANTITY FOR EACH EXISTING AIR HANDLING SYSTEM REQUIRING REBALANCING DURING AIR QUANTITY FOR EACH EXISTING AIR HANDLING SYSTEM REQUIRING REBALANCING DURING AIR QUANTITY EACH EXISTING AIR HANDLING SYSTEM REQUIRING REBALANCING DURING AIR QUANTITY EACH EXISTING AIR HANDLING SYSTEM REQUIRING REBALANCING DURING AIR QUANTITY EXISTING AIR HANDLING SYSTEM REQUIRING REBALANCING DURING AIR QUANTITY EXISTING AIR HANDLING SYSTEM REQUIRING REBALANCING DURING AIR QUANTITY AIR HANDLING SYSTEM REQUIRING REBALANCING DURING AIR QUANTITY AIR HANDLING SYSTEM REQUIRING REBALANCING DURING AIR QUANTITY HANDLING SYSTEM REQUIRING REBALANCING DURING AIR QUANTITY HANDLING SYSTEM REQUIRING REBALANCING DURING AIR QUANTITY SYSTEM REQUIRING REBALANCING DURING AIR QUANTITY SYSTEM REQUIRING REBALANCING DURING AIR QUANTITY REQUIRING REBALANCING DURING AIR QUANTITY REQUIRING REBALANCING DURING AIR QUANTITY REBALANCING DURING AIR QUANTITY REBALANCING DURING AIR QUANTITY DURING AIR QUANTITY DURING AIR QUANTITY AIR QUANTITY AIR QUANTITY QUANTITY QUANTITY BALANCING OPERATIONS. FURNISH SHEAVES AS SPECIFIED.

AutoCAD SHX Text

H. FAN BEARINGS: ANTI-FRICTION BALL OR ROLLER TYPE WITH PROVISION FOR SELF-ALIGNMENT AND THRUST FAN BEARINGS: ANTI-FRICTION BALL OR ROLLER TYPE WITH PROVISION FOR SELF-ALIGNMENT AND THRUST BEARINGS: ANTI-FRICTION BALL OR ROLLER TYPE WITH PROVISION FOR SELF-ALIGNMENT AND THRUST BEARINGS: ANTI-FRICTION BALL OR ROLLER TYPE WITH PROVISION FOR SELF-ALIGNMENT AND THRUST ANTI-FRICTION BALL OR ROLLER TYPE WITH PROVISION FOR SELF-ALIGNMENT AND THRUST ANTI-FRICTION BALL OR ROLLER TYPE WITH PROVISION FOR SELF-ALIGNMENT AND THRUST ANTI-FRICTION BALL OR ROLLER TYPE WITH PROVISION FOR SELF-ALIGNMENT AND THRUST BALL OR ROLLER TYPE WITH PROVISION FOR SELF-ALIGNMENT AND THRUST BALL OR ROLLER TYPE WITH PROVISION FOR SELF-ALIGNMENT AND THRUST OR ROLLER TYPE WITH PROVISION FOR SELF-ALIGNMENT AND THRUST OR ROLLER TYPE WITH PROVISION FOR SELF-ALIGNMENT AND THRUST ROLLER TYPE WITH PROVISION FOR SELF-ALIGNMENT AND THRUST ROLLER TYPE WITH PROVISION FOR SELF-ALIGNMENT AND THRUST TYPE WITH PROVISION FOR SELF-ALIGNMENT AND THRUST TYPE WITH PROVISION FOR SELF-ALIGNMENT AND THRUST WITH PROVISION FOR SELF-ALIGNMENT AND THRUST WITH PROVISION FOR SELF-ALIGNMENT AND THRUST PROVISION FOR SELF-ALIGNMENT AND THRUST PROVISION FOR SELF-ALIGNMENT AND THRUST FOR SELF-ALIGNMENT AND THRUST FOR SELF-ALIGNMENT AND THRUST SELF-ALIGNMENT AND THRUST SELF-ALIGNMENT AND THRUST AND THRUST AND THRUST THRUST THRUST LOAD. MADE IN USA. WITH ABMA L MINIMUM LIFE OF 200,000 HOURS. USE CAST IRON HOUSINGS AND MADE IN USA. WITH ABMA L MINIMUM LIFE OF 200,000 HOURS. USE CAST IRON HOUSINGS AND MADE IN USA. WITH ABMA L MINIMUM LIFE OF 200,000 HOURS. USE CAST IRON HOUSINGS AND IN USA. WITH ABMA L MINIMUM LIFE OF 200,000 HOURS. USE CAST IRON HOUSINGS AND IN USA. WITH ABMA L MINIMUM LIFE OF 200,000 HOURS. USE CAST IRON HOUSINGS AND USA. WITH ABMA L MINIMUM LIFE OF 200,000 HOURS. USE CAST IRON HOUSINGS AND USA. WITH ABMA L MINIMUM LIFE OF 200,000 HOURS. USE CAST IRON HOUSINGS AND WITH ABMA L MINIMUM LIFE OF 200,000 HOURS. USE CAST IRON HOUSINGS AND WITH ABMA L MINIMUM LIFE OF 200,000 HOURS. USE CAST IRON HOUSINGS AND ABMA L MINIMUM LIFE OF 200,000 HOURS. USE CAST IRON HOUSINGS AND ABMA L MINIMUM LIFE OF 200,000 HOURS. USE CAST IRON HOUSINGS AND L MINIMUM LIFE OF 200,000 HOURS. USE CAST IRON HOUSINGS AND L MINIMUM LIFE OF 200,000 HOURS. USE CAST IRON HOUSINGS AND 10 MINIMUM LIFE OF 200,000 HOURS. USE CAST IRON HOUSINGS AND LIFE OF 200,000 HOURS. USE CAST IRON HOUSINGS AND LIFE OF 200,000 HOURS. USE CAST IRON HOUSINGS AND OF 200,000 HOURS. USE CAST IRON HOUSINGS AND OF 200,000 HOURS. USE CAST IRON HOUSINGS AND 200,000 HOURS. USE CAST IRON HOUSINGS AND 200,000 HOURS. USE CAST IRON HOUSINGS AND HOURS. USE CAST IRON HOUSINGS AND HOURS. USE CAST IRON HOUSINGS AND USE CAST IRON HOUSINGS AND USE CAST IRON HOUSINGS AND CAST IRON HOUSINGS AND CAST IRON HOUSINGS AND IRON HOUSINGS AND IRON HOUSINGS AND HOUSINGS AND HOUSINGS AND AND AND DUST-TIGHT SEALS SUITABLE FOR LUBRICANT PRESSURES.

AutoCAD SHX Text

1.LUBRICATION PROVISIONS: USE SURFACE BALL CHECK TYPE SUPPLY FITTINGS. PROVIDE EXTENSION TUBES LUBRICATION PROVISIONS: USE SURFACE BALL CHECK TYPE SUPPLY FITTINGS. PROVIDE EXTENSION TUBES PROVISIONS: USE SURFACE BALL CHECK TYPE SUPPLY FITTINGS. PROVIDE EXTENSION TUBES PROVISIONS: USE SURFACE BALL CHECK TYPE SUPPLY FITTINGS. PROVIDE EXTENSION TUBES USE SURFACE BALL CHECK TYPE SUPPLY FITTINGS. PROVIDE EXTENSION TUBES USE SURFACE BALL CHECK TYPE SUPPLY FITTINGS. PROVIDE EXTENSION TUBES USE SURFACE BALL CHECK TYPE SUPPLY FITTINGS. PROVIDE EXTENSION TUBES SURFACE BALL CHECK TYPE SUPPLY FITTINGS. PROVIDE EXTENSION TUBES SURFACE BALL CHECK TYPE SUPPLY FITTINGS. PROVIDE EXTENSION TUBES BALL CHECK TYPE SUPPLY FITTINGS. PROVIDE EXTENSION TUBES BALL CHECK TYPE SUPPLY FITTINGS. PROVIDE EXTENSION TUBES CHECK TYPE SUPPLY FITTINGS. PROVIDE EXTENSION TUBES CHECK TYPE SUPPLY FITTINGS. PROVIDE EXTENSION TUBES TYPE SUPPLY FITTINGS. PROVIDE EXTENSION TUBES TYPE SUPPLY FITTINGS. PROVIDE EXTENSION TUBES SUPPLY FITTINGS. PROVIDE EXTENSION TUBES SUPPLY FITTINGS. PROVIDE EXTENSION TUBES FITTINGS. PROVIDE EXTENSION TUBES FITTINGS. PROVIDE EXTENSION TUBES PROVIDE EXTENSION TUBES PROVIDE EXTENSION TUBES EXTENSION TUBES EXTENSION TUBES TUBES TUBES TO ALLOW SAFE MAINTENANCE WHILE EQUIPMENT IS OPERATING. PROVIDE MANUAL OR AUTOMATIC PRESSURE ALLOW SAFE MAINTENANCE WHILE EQUIPMENT IS OPERATING. PROVIDE MANUAL OR AUTOMATIC PRESSURE ALLOW SAFE MAINTENANCE WHILE EQUIPMENT IS OPERATING. PROVIDE MANUAL OR AUTOMATIC PRESSURE SAFE MAINTENANCE WHILE EQUIPMENT IS OPERATING. PROVIDE MANUAL OR AUTOMATIC PRESSURE SAFE MAINTENANCE WHILE EQUIPMENT IS OPERATING. PROVIDE MANUAL OR AUTOMATIC PRESSURE MAINTENANCE WHILE EQUIPMENT IS OPERATING. PROVIDE MANUAL OR AUTOMATIC PRESSURE MAINTENANCE WHILE EQUIPMENT IS OPERATING. PROVIDE MANUAL OR AUTOMATIC PRESSURE WHILE EQUIPMENT IS OPERATING. PROVIDE MANUAL OR AUTOMATIC PRESSURE WHILE EQUIPMENT IS OPERATING. PROVIDE MANUAL OR AUTOMATIC PRESSURE EQUIPMENT IS OPERATING. PROVIDE MANUAL OR AUTOMATIC PRESSURE EQUIPMENT IS OPERATING. PROVIDE MANUAL OR AUTOMATIC PRESSURE IS OPERATING. PROVIDE MANUAL OR AUTOMATIC PRESSURE IS OPERATING. PROVIDE MANUAL OR AUTOMATIC PRESSURE OPERATING. PROVIDE MANUAL OR AUTOMATIC PRESSURE OPERATING. PROVIDE MANUAL OR AUTOMATIC PRESSURE PROVIDE MANUAL OR AUTOMATIC PRESSURE PROVIDE MANUAL OR AUTOMATIC PRESSURE MANUAL OR AUTOMATIC PRESSURE MANUAL OR AUTOMATIC PRESSURE OR AUTOMATIC PRESSURE OR AUTOMATIC PRESSURE AUTOMATIC PRESSURE AUTOMATIC PRESSURE PRESSURE PRESSURE RELIEF FITTINGS TO PREVENT OVERHEATING OR SEAL BLOW-OUT DUE TO EXCESS LUBRICANT OR PRESSURE. FITTINGS TO PREVENT OVERHEATING OR SEAL BLOW-OUT DUE TO EXCESS LUBRICANT OR PRESSURE. FITTINGS TO PREVENT OVERHEATING OR SEAL BLOW-OUT DUE TO EXCESS LUBRICANT OR PRESSURE. TO PREVENT OVERHEATING OR SEAL BLOW-OUT DUE TO EXCESS LUBRICANT OR PRESSURE. TO PREVENT OVERHEATING OR SEAL BLOW-OUT DUE TO EXCESS LUBRICANT OR PRESSURE. PREVENT OVERHEATING OR SEAL BLOW-OUT DUE TO EXCESS LUBRICANT OR PRESSURE. PREVENT OVERHEATING OR SEAL BLOW-OUT DUE TO EXCESS LUBRICANT OR PRESSURE. OVERHEATING OR SEAL BLOW-OUT DUE TO EXCESS LUBRICANT OR PRESSURE. OVERHEATING OR SEAL BLOW-OUT DUE TO EXCESS LUBRICANT OR PRESSURE. OR SEAL BLOW-OUT DUE TO EXCESS LUBRICANT OR PRESSURE. OR SEAL BLOW-OUT DUE TO EXCESS LUBRICANT OR PRESSURE. SEAL BLOW-OUT DUE TO EXCESS LUBRICANT OR PRESSURE. SEAL BLOW-OUT DUE TO EXCESS LUBRICANT OR PRESSURE. BLOW-OUT DUE TO EXCESS LUBRICANT OR PRESSURE. BLOW-OUT DUE TO EXCESS LUBRICANT OR PRESSURE. DUE TO EXCESS LUBRICANT OR PRESSURE. DUE TO EXCESS LUBRICANT OR PRESSURE. TO EXCESS LUBRICANT OR PRESSURE. TO EXCESS LUBRICANT OR PRESSURE. EXCESS LUBRICANT OR PRESSURE. EXCESS LUBRICANT OR PRESSURE. LUBRICANT OR PRESSURE. LUBRICANT OR PRESSURE. OR PRESSURE. OR PRESSURE. PRESSURE. PRESSURE. ARRANGE RELIEF FITTINGS OPPOSITE SUPPLY BUT VISIBLE FOR NORMAL MAINTENANCE OBSERVATION.

AutoCAD SHX Text

2. BEARINGS ON EQUIPMENT WITH LESS THAN 1/2 HORSEPOWER RATING OR ON SHAFTS SMALLER THAN 1-3/4 BEARINGS ON EQUIPMENT WITH LESS THAN 1/2 HORSEPOWER RATING OR ON SHAFTS SMALLER THAN 1-3/4 ON EQUIPMENT WITH LESS THAN 1/2 HORSEPOWER RATING OR ON SHAFTS SMALLER THAN 1-3/4 ON EQUIPMENT WITH LESS THAN 1/2 HORSEPOWER RATING OR ON SHAFTS SMALLER THAN 1-3/4 EQUIPMENT WITH LESS THAN 1/2 HORSEPOWER RATING OR ON SHAFTS SMALLER THAN 1-3/4 EQUIPMENT WITH LESS THAN 1/2 HORSEPOWER RATING OR ON SHAFTS SMALLER THAN 1-3/4 WITH LESS THAN 1/2 HORSEPOWER RATING OR ON SHAFTS SMALLER THAN 1-3/4 WITH LESS THAN 1/2 HORSEPOWER RATING OR ON SHAFTS SMALLER THAN 1-3/4 LESS THAN 1/2 HORSEPOWER RATING OR ON SHAFTS SMALLER THAN 1-3/4 LESS THAN 1/2 HORSEPOWER RATING OR ON SHAFTS SMALLER THAN 1-3/4 THAN 1/2 HORSEPOWER RATING OR ON SHAFTS SMALLER THAN 1-3/4 THAN 1/2 HORSEPOWER RATING OR ON SHAFTS SMALLER THAN 1-3/4 1/2 HORSEPOWER RATING OR ON SHAFTS SMALLER THAN 1-3/4 1/2 HORSEPOWER RATING OR ON SHAFTS SMALLER THAN 1-3/4 HORSEPOWER RATING OR ON SHAFTS SMALLER THAN 1-3/4 HORSEPOWER RATING OR ON SHAFTS SMALLER THAN 1-3/4 RATING OR ON SHAFTS SMALLER THAN 1-3/4 RATING OR ON SHAFTS SMALLER THAN 1-3/4 OR ON SHAFTS SMALLER THAN 1-3/4 OR ON SHAFTS SMALLER THAN 1-3/4 ON SHAFTS SMALLER THAN 1-3/4 ON SHAFTS SMALLER THAN 1-3/4 SHAFTS SMALLER THAN 1-3/4 SHAFTS SMALLER THAN 1-3/4 SMALLER THAN 1-3/4 SMALLER THAN 1-3/4 THAN 1-3/4 THAN 1-3/4 1-3/4 1-3/4 INCH IN DIAMETER: PERMANENTLY SEALED, PRE-LUBRICATED ANTI-FRICTION BEARINGS PER SPECIFIED IN DIAMETER: PERMANENTLY SEALED, PRE-LUBRICATED ANTI-FRICTION BEARINGS PER SPECIFIED IN DIAMETER: PERMANENTLY SEALED, PRE-LUBRICATED ANTI-FRICTION BEARINGS PER SPECIFIED DIAMETER: PERMANENTLY SEALED, PRE-LUBRICATED ANTI-FRICTION BEARINGS PER SPECIFIED DIAMETER: PERMANENTLY SEALED, PRE-LUBRICATED ANTI-FRICTION BEARINGS PER SPECIFIED PERMANENTLY SEALED, PRE-LUBRICATED ANTI-FRICTION BEARINGS PER SPECIFIED PERMANENTLY SEALED, PRE-LUBRICATED ANTI-FRICTION BEARINGS PER SPECIFIED SEALED, PRE-LUBRICATED ANTI-FRICTION BEARINGS PER SPECIFIED SEALED, PRE-LUBRICATED ANTI-FRICTION BEARINGS PER SPECIFIED PRE-LUBRICATED ANTI-FRICTION BEARINGS PER SPECIFIED PRE-LUBRICATED ANTI-FRICTION BEARINGS PER SPECIFIED ANTI-FRICTION BEARINGS PER SPECIFIED ANTI-FRICTION BEARINGS PER SPECIFIED BEARINGS PER SPECIFIED BEARINGS PER SPECIFIED PER SPECIFIED PER SPECIFIED SPECIFIED SPECIFIED MATERIALS AND ABMA L LIFE REQUIREMENTS.10 LIFE REQUIREMENTS.

AutoCAD SHX Text

I.INSTALL SHEAVES WHERE RECOMMENDED BY TESTING, ADJUSTING, AND BALANCING AGENCY.INSTALL SHEAVES WHERE RECOMMENDED BY TESTING, ADJUSTING, AND BALANCING AGENCY.

AutoCAD SHX Text

TESTING, ADJUSTING, AND BALANCING

AutoCAD SHX Text

A.GENERAL PROCEDURES FOR TESTING AND BALANCING:GENERAL PROCEDURES FOR TESTING AND BALANCING:

AutoCAD SHX Text

1.PERFORM TESTING AND BALANCING PROCEDURES ON EACH SYSTEM ACCORDING TO THE PROCEDURES PERFORM TESTING AND BALANCING PROCEDURES ON EACH SYSTEM ACCORDING TO THE PROCEDURES TESTING AND BALANCING PROCEDURES ON EACH SYSTEM ACCORDING TO THE PROCEDURES TESTING AND BALANCING PROCEDURES ON EACH SYSTEM ACCORDING TO THE PROCEDURES AND BALANCING PROCEDURES ON EACH SYSTEM ACCORDING TO THE PROCEDURES AND BALANCING PROCEDURES ON EACH SYSTEM ACCORDING TO THE PROCEDURES BALANCING PROCEDURES ON EACH SYSTEM ACCORDING TO THE PROCEDURES BALANCING PROCEDURES ON EACH SYSTEM ACCORDING TO THE PROCEDURES PROCEDURES ON EACH SYSTEM ACCORDING TO THE PROCEDURES PROCEDURES ON EACH SYSTEM ACCORDING TO THE PROCEDURES ON EACH SYSTEM ACCORDING TO THE PROCEDURES ON EACH SYSTEM ACCORDING TO THE PROCEDURES EACH SYSTEM ACCORDING TO THE PROCEDURES EACH SYSTEM ACCORDING TO THE PROCEDURES SYSTEM ACCORDING TO THE PROCEDURES SYSTEM ACCORDING TO THE PROCEDURES ACCORDING TO THE PROCEDURES ACCORDING TO THE PROCEDURES TO THE PROCEDURES TO THE PROCEDURES THE PROCEDURES THE PROCEDURES PROCEDURES PROCEDURES CONTAINED IN AABC'S "NATIONAL STANDARDS FOR TESTING AND BALANCING HEATING, VENTILATING, AND IN AABC'S "NATIONAL STANDARDS FOR TESTING AND BALANCING HEATING, VENTILATING, AND IN AABC'S "NATIONAL STANDARDS FOR TESTING AND BALANCING HEATING, VENTILATING, AND AABC'S "NATIONAL STANDARDS FOR TESTING AND BALANCING HEATING, VENTILATING, AND AABC'S "NATIONAL STANDARDS FOR TESTING AND BALANCING HEATING, VENTILATING, AND "NATIONAL STANDARDS FOR TESTING AND BALANCING HEATING, VENTILATING, AND "NATIONAL STANDARDS FOR TESTING AND BALANCING HEATING, VENTILATING, AND STANDARDS FOR TESTING AND BALANCING HEATING, VENTILATING, AND STANDARDS FOR TESTING AND BALANCING HEATING, VENTILATING, AND FOR TESTING AND BALANCING HEATING, VENTILATING, AND FOR TESTING AND BALANCING HEATING, VENTILATING, AND TESTING AND BALANCING HEATING, VENTILATING, AND TESTING AND BALANCING HEATING, VENTILATING, AND AND BALANCING HEATING, VENTILATING, AND AND BALANCING HEATING, VENTILATING, AND BALANCING HEATING, VENTILATING, AND BALANCING HEATING, VENTILATING, AND HEATING, VENTILATING, AND HEATING, VENTILATING, AND VENTILATING, AND VENTILATING, AND AND AND AIR CONDITIONING SYSTEMS" OR NEBB'S "PROCEDURAL STANDARDS FOR TESTING, ADJUSTING, AND CONDITIONING SYSTEMS" OR NEBB'S "PROCEDURAL STANDARDS FOR TESTING, ADJUSTING, AND CONDITIONING SYSTEMS" OR NEBB'S "PROCEDURAL STANDARDS FOR TESTING, ADJUSTING, AND SYSTEMS" OR NEBB'S "PROCEDURAL STANDARDS FOR TESTING, ADJUSTING, AND SYSTEMS" OR NEBB'S "PROCEDURAL STANDARDS FOR TESTING, ADJUSTING, AND OR NEBB'S "PROCEDURAL STANDARDS FOR TESTING, ADJUSTING, AND OR NEBB'S "PROCEDURAL STANDARDS FOR TESTING, ADJUSTING, AND NEBB'S "PROCEDURAL STANDARDS FOR TESTING, ADJUSTING, AND NEBB'S "PROCEDURAL STANDARDS FOR TESTING, ADJUSTING, AND "PROCEDURAL STANDARDS FOR TESTING, ADJUSTING, AND "PROCEDURAL STANDARDS FOR TESTING, ADJUSTING, AND STANDARDS FOR TESTING, ADJUSTING, AND STANDARDS FOR TESTING, ADJUSTING, AND FOR TESTING, ADJUSTING, AND FOR TESTING, ADJUSTING, AND TESTING, ADJUSTING, AND TESTING, ADJUSTING, AND ADJUSTING, AND ADJUSTING, AND AND AND BALANCING OF ENVIRONMENTAL SYSTEMS" AND THIS SECTION.

AutoCAD SHX Text

2.MARK EQUIPMENT AND BALANCING DEVICE SETTINGS WITH PAINT OR OTHER SUITABLE, PERMANENT MARK EQUIPMENT AND BALANCING DEVICE SETTINGS WITH PAINT OR OTHER SUITABLE, PERMANENT EQUIPMENT AND BALANCING DEVICE SETTINGS WITH PAINT OR OTHER SUITABLE, PERMANENT EQUIPMENT AND BALANCING DEVICE SETTINGS WITH PAINT OR OTHER SUITABLE, PERMANENT AND BALANCING DEVICE SETTINGS WITH PAINT OR OTHER SUITABLE, PERMANENT AND BALANCING DEVICE SETTINGS WITH PAINT OR OTHER SUITABLE, PERMANENT BALANCING DEVICE SETTINGS WITH PAINT OR OTHER SUITABLE, PERMANENT BALANCING DEVICE SETTINGS WITH PAINT OR OTHER SUITABLE, PERMANENT DEVICE SETTINGS WITH PAINT OR OTHER SUITABLE, PERMANENT DEVICE SETTINGS WITH PAINT OR OTHER SUITABLE, PERMANENT SETTINGS WITH PAINT OR OTHER SUITABLE, PERMANENT SETTINGS WITH PAINT OR OTHER SUITABLE, PERMANENT WITH PAINT OR OTHER SUITABLE, PERMANENT WITH PAINT OR OTHER SUITABLE, PERMANENT PAINT OR OTHER SUITABLE, PERMANENT PAINT OR OTHER SUITABLE, PERMANENT OR OTHER SUITABLE, PERMANENT OR OTHER SUITABLE, PERMANENT OTHER SUITABLE, PERMANENT OTHER SUITABLE, PERMANENT SUITABLE, PERMANENT SUITABLE, PERMANENT PERMANENT PERMANENT IDENTIFICATION MATERIAL, INCLUDING DAMPER-CONTROL POSITIONS, VALVE POSITION INDICATORS, MATERIAL, INCLUDING DAMPER-CONTROL POSITIONS, VALVE POSITION INDICATORS, MATERIAL, INCLUDING DAMPER-CONTROL POSITIONS, VALVE POSITION INDICATORS, INCLUDING DAMPER-CONTROL POSITIONS, VALVE POSITION INDICATORS, INCLUDING DAMPER-CONTROL POSITIONS, VALVE POSITION INDICATORS, DAMPER-CONTROL POSITIONS, VALVE POSITION INDICATORS, DAMPER-CONTROL POSITIONS, VALVE POSITION INDICATORS, POSITIONS, VALVE POSITION INDICATORS, POSITIONS, VALVE POSITION INDICATORS, VALVE POSITION INDICATORS, VALVE POSITION INDICATORS, POSITION INDICATORS, POSITION INDICATORS, INDICATORS, INDICATORS, FAN-SPEED-CONTROL LEVERS, AND SIMILAR CONTROLS AND DEVICES, TO SHOW FINAL SETTINGS.

AutoCAD SHX Text

B.GENERAL PROCEDURES FOR BALANCING AIR SYSTEMS:GENERAL PROCEDURES FOR BALANCING AIR SYSTEMS:

AutoCAD SHX Text

1.PREPARE TEST REPORTS FOR BOTH FANS AND OUTLETS. OBTAIN MANUFACTURER'S OUTLET FACTORS AND PREPARE TEST REPORTS FOR BOTH FANS AND OUTLETS. OBTAIN MANUFACTURER'S OUTLET FACTORS AND TEST REPORTS FOR BOTH FANS AND OUTLETS. OBTAIN MANUFACTURER'S OUTLET FACTORS AND TEST REPORTS FOR BOTH FANS AND OUTLETS. OBTAIN MANUFACTURER'S OUTLET FACTORS AND REPORTS FOR BOTH FANS AND OUTLETS. OBTAIN MANUFACTURER'S OUTLET FACTORS AND REPORTS FOR BOTH FANS AND OUTLETS. OBTAIN MANUFACTURER'S OUTLET FACTORS AND FOR BOTH FANS AND OUTLETS. OBTAIN MANUFACTURER'S OUTLET FACTORS AND FOR BOTH FANS AND OUTLETS. OBTAIN MANUFACTURER'S OUTLET FACTORS AND BOTH FANS AND OUTLETS. OBTAIN MANUFACTURER'S OUTLET FACTORS AND BOTH FANS AND OUTLETS. OBTAIN MANUFACTURER'S OUTLET FACTORS AND FANS AND OUTLETS. OBTAIN MANUFACTURER'S OUTLET FACTORS AND FANS AND OUTLETS. OBTAIN MANUFACTURER'S OUTLET FACTORS AND AND OUTLETS. OBTAIN MANUFACTURER'S OUTLET FACTORS AND AND OUTLETS. OBTAIN MANUFACTURER'S OUTLET FACTORS AND OUTLETS. OBTAIN MANUFACTURER'S OUTLET FACTORS AND OUTLETS. OBTAIN MANUFACTURER'S OUTLET FACTORS AND OBTAIN MANUFACTURER'S OUTLET FACTORS AND OBTAIN MANUFACTURER'S OUTLET FACTORS AND MANUFACTURER'S OUTLET FACTORS AND MANUFACTURER'S OUTLET FACTORS AND OUTLET FACTORS AND OUTLET FACTORS AND FACTORS AND FACTORS AND AND AND RECOMMENDED TESTING PROCEDURES. CROSSCHECK THE SUMMATION OF REQUIRED OUTLET VOLUMES WITH TESTING PROCEDURES. CROSSCHECK THE SUMMATION OF REQUIRED OUTLET VOLUMES WITH TESTING PROCEDURES. CROSSCHECK THE SUMMATION OF REQUIRED OUTLET VOLUMES WITH PROCEDURES. CROSSCHECK THE SUMMATION OF REQUIRED OUTLET VOLUMES WITH PROCEDURES. CROSSCHECK THE SUMMATION OF REQUIRED OUTLET VOLUMES WITH CROSSCHECK THE SUMMATION OF REQUIRED OUTLET VOLUMES WITH CROSSCHECK THE SUMMATION OF REQUIRED OUTLET VOLUMES WITH THE SUMMATION OF REQUIRED OUTLET VOLUMES WITH THE SUMMATION OF REQUIRED OUTLET VOLUMES WITH SUMMATION OF REQUIRED OUTLET VOLUMES WITH SUMMATION OF REQUIRED OUTLET VOLUMES WITH OF REQUIRED OUTLET VOLUMES WITH OF REQUIRED OUTLET VOLUMES WITH REQUIRED OUTLET VOLUMES WITH REQUIRED OUTLET VOLUMES WITH OUTLET VOLUMES WITH OUTLET VOLUMES WITH VOLUMES WITH VOLUMES WITH WITH WITH REQUIRED FAN VOLUMES.

AutoCAD SHX Text

2.PREPARE SCHEMATIC DIAGRAMS OF SYSTEMS' "AS-BUILT" DUCT LAYOUTS, OR USE REDUCED SCALE PREPARE SCHEMATIC DIAGRAMS OF SYSTEMS' "AS-BUILT" DUCT LAYOUTS, OR USE REDUCED SCALE SCHEMATIC DIAGRAMS OF SYSTEMS' "AS-BUILT" DUCT LAYOUTS, OR USE REDUCED SCALE SCHEMATIC DIAGRAMS OF SYSTEMS' "AS-BUILT" DUCT LAYOUTS, OR USE REDUCED SCALE DIAGRAMS OF SYSTEMS' "AS-BUILT" DUCT LAYOUTS, OR USE REDUCED SCALE DIAGRAMS OF SYSTEMS' "AS-BUILT" DUCT LAYOUTS, OR USE REDUCED SCALE OF SYSTEMS' "AS-BUILT" DUCT LAYOUTS, OR USE REDUCED SCALE OF SYSTEMS' "AS-BUILT" DUCT LAYOUTS, OR USE REDUCED SCALE SYSTEMS' "AS-BUILT" DUCT LAYOUTS, OR USE REDUCED SCALE SYSTEMS' "AS-BUILT" DUCT LAYOUTS, OR USE REDUCED SCALE "AS-BUILT" DUCT LAYOUTS, OR USE REDUCED SCALE "AS-BUILT" DUCT LAYOUTS, OR USE REDUCED SCALE DUCT LAYOUTS, OR USE REDUCED SCALE DUCT LAYOUTS, OR USE REDUCED SCALE LAYOUTS, OR USE REDUCED SCALE LAYOUTS, OR USE REDUCED SCALE OR USE REDUCED SCALE OR USE REDUCED SCALE USE REDUCED SCALE USE REDUCED SCALE REDUCED SCALE REDUCED SCALE SCALE SCALE CONTRACT DOCUMENTS WITH NOTATIONS.

AutoCAD SHX Text

3.DETERMINE THE BEST LOCATIONS IN MAIN AND BRANCH DUCTS FOR ACCURATE DUCT AIRFLOW DETERMINE THE BEST LOCATIONS IN MAIN AND BRANCH DUCTS FOR ACCURATE DUCT AIRFLOW THE BEST LOCATIONS IN MAIN AND BRANCH DUCTS FOR ACCURATE DUCT AIRFLOW THE BEST LOCATIONS IN MAIN AND BRANCH DUCTS FOR ACCURATE DUCT AIRFLOW BEST LOCATIONS IN MAIN AND BRANCH DUCTS FOR ACCURATE DUCT AIRFLOW BEST LOCATIONS IN MAIN AND BRANCH DUCTS FOR ACCURATE DUCT AIRFLOW LOCATIONS IN MAIN AND BRANCH DUCTS FOR ACCURATE DUCT AIRFLOW LOCATIONS IN MAIN AND BRANCH DUCTS FOR ACCURATE DUCT AIRFLOW IN MAIN AND BRANCH DUCTS FOR ACCURATE DUCT AIRFLOW IN MAIN AND BRANCH DUCTS FOR ACCURATE DUCT AIRFLOW MAIN AND BRANCH DUCTS FOR ACCURATE DUCT AIRFLOW MAIN AND BRANCH DUCTS FOR ACCURATE DUCT AIRFLOW AND BRANCH DUCTS FOR ACCURATE DUCT AIRFLOW AND BRANCH DUCTS FOR ACCURATE DUCT AIRFLOW BRANCH DUCTS FOR ACCURATE DUCT AIRFLOW BRANCH DUCTS FOR ACCURATE DUCT AIRFLOW DUCTS FOR ACCURATE DUCT AIRFLOW DUCTS FOR ACCURATE DUCT AIRFLOW FOR ACCURATE DUCT AIRFLOW FOR ACCURATE DUCT AIRFLOW ACCURATE DUCT AIRFLOW ACCURATE DUCT AIRFLOW DUCT AIRFLOW DUCT AIRFLOW AIRFLOW AIRFLOW MEASUREMENTS.

AutoCAD SHX Text

4.CUT INSULATION, AND DRILL DUCTS FOR INSTALLATION OF TEST PROBES TO THE MINIMUM EXTENT CUT INSULATION, AND DRILL DUCTS FOR INSTALLATION OF TEST PROBES TO THE MINIMUM EXTENT INSULATION, AND DRILL DUCTS FOR INSTALLATION OF TEST PROBES TO THE MINIMUM EXTENT INSULATION, AND DRILL DUCTS FOR INSTALLATION OF TEST PROBES TO THE MINIMUM EXTENT AND DRILL DUCTS FOR INSTALLATION OF TEST PROBES TO THE MINIMUM EXTENT AND DRILL DUCTS FOR INSTALLATION OF TEST PROBES TO THE MINIMUM EXTENT DRILL DUCTS FOR INSTALLATION OF TEST PROBES TO THE MINIMUM EXTENT DRILL DUCTS FOR INSTALLATION OF TEST PROBES TO THE MINIMUM EXTENT DUCTS FOR INSTALLATION OF TEST PROBES TO THE MINIMUM EXTENT DUCTS FOR INSTALLATION OF TEST PROBES TO THE MINIMUM EXTENT FOR INSTALLATION OF TEST PROBES TO THE MINIMUM EXTENT FOR INSTALLATION OF TEST PROBES TO THE MINIMUM EXTENT INSTALLATION OF TEST PROBES TO THE MINIMUM EXTENT INSTALLATION OF TEST PROBES TO THE MINIMUM EXTENT OF TEST PROBES TO THE MINIMUM EXTENT OF TEST PROBES TO THE MINIMUM EXTENT TEST PROBES TO THE MINIMUM EXTENT TEST PROBES TO THE MINIMUM EXTENT PROBES TO THE MINIMUM EXTENT PROBES TO THE MINIMUM EXTENT TO THE MINIMUM EXTENT TO THE MINIMUM EXTENT THE MINIMUM EXTENT THE MINIMUM EXTENT MINIMUM EXTENT MINIMUM EXTENT EXTENT EXTENT NECESSARY TO ALLOW ADEQUATE PERFORMANCE OF PROCEDURES. AFTER TESTING AND BALANCING, CLOSE TO ALLOW ADEQUATE PERFORMANCE OF PROCEDURES. AFTER TESTING AND BALANCING, CLOSE TO ALLOW ADEQUATE PERFORMANCE OF PROCEDURES. AFTER TESTING AND BALANCING, CLOSE ALLOW ADEQUATE PERFORMANCE OF PROCEDURES. AFTER TESTING AND BALANCING, CLOSE ALLOW ADEQUATE PERFORMANCE OF PROCEDURES. AFTER TESTING AND BALANCING, CLOSE ADEQUATE PERFORMANCE OF PROCEDURES. AFTER TESTING AND BALANCING, CLOSE ADEQUATE PERFORMANCE OF PROCEDURES. AFTER TESTING AND BALANCING, CLOSE PERFORMANCE OF PROCEDURES. AFTER TESTING AND BALANCING, CLOSE PERFORMANCE OF PROCEDURES. AFTER TESTING AND BALANCING, CLOSE OF PROCEDURES. AFTER TESTING AND BALANCING, CLOSE OF PROCEDURES. AFTER TESTING AND BALANCING, CLOSE PROCEDURES. AFTER TESTING AND BALANCING, CLOSE PROCEDURES. AFTER TESTING AND BALANCING, CLOSE AFTER TESTING AND BALANCING, CLOSE AFTER TESTING AND BALANCING, CLOSE TESTING AND BALANCING, CLOSE TESTING AND BALANCING, CLOSE AND BALANCING, CLOSE AND BALANCING, CLOSE BALANCING, CLOSE BALANCING, CLOSE CLOSE CLOSE PROBE HOLES WITH NEAT PATCHES, NEOPRENE PLUGS, THREADED PLUGS, OR THREADED TWIST-ON METAL HOLES WITH NEAT PATCHES, NEOPRENE PLUGS, THREADED PLUGS, OR THREADED TWIST-ON METAL HOLES WITH NEAT PATCHES, NEOPRENE PLUGS, THREADED PLUGS, OR THREADED TWIST-ON METAL WITH NEAT PATCHES, NEOPRENE PLUGS, THREADED PLUGS, OR THREADED TWIST-ON METAL WITH NEAT PATCHES, NEOPRENE PLUGS, THREADED PLUGS, OR THREADED TWIST-ON METAL NEAT PATCHES, NEOPRENE PLUGS, THREADED PLUGS, OR THREADED TWIST-ON METAL NEAT PATCHES, NEOPRENE PLUGS, THREADED PLUGS, OR THREADED TWIST-ON METAL PATCHES, NEOPRENE PLUGS, THREADED PLUGS, OR THREADED TWIST-ON METAL PATCHES, NEOPRENE PLUGS, THREADED PLUGS, OR THREADED TWIST-ON METAL NEOPRENE PLUGS, THREADED PLUGS, OR THREADED TWIST-ON METAL NEOPRENE PLUGS, THREADED PLUGS, OR THREADED TWIST-ON METAL PLUGS, THREADED PLUGS, OR THREADED TWIST-ON METAL PLUGS, THREADED PLUGS, OR THREADED TWIST-ON METAL THREADED PLUGS, OR THREADED TWIST-ON METAL THREADED PLUGS, OR THREADED TWIST-ON METAL PLUGS, OR THREADED TWIST-ON METAL PLUGS, OR THREADED TWIST-ON METAL OR THREADED TWIST-ON METAL OR THREADED TWIST-ON METAL THREADED TWIST-ON METAL THREADED TWIST-ON METAL TWIST-ON METAL TWIST-ON METAL METAL METAL CAPS, AND PATCH INSULATION WITH NEW MATERIALS IDENTICAL TO THOSE REMOVED. RESTORE VAPOR AND PATCH INSULATION WITH NEW MATERIALS IDENTICAL TO THOSE REMOVED. RESTORE VAPOR AND PATCH INSULATION WITH NEW MATERIALS IDENTICAL TO THOSE REMOVED. RESTORE VAPOR PATCH INSULATION WITH NEW MATERIALS IDENTICAL TO THOSE REMOVED. RESTORE VAPOR PATCH INSULATION WITH NEW MATERIALS IDENTICAL TO THOSE REMOVED. RESTORE VAPOR INSULATION WITH NEW MATERIALS IDENTICAL TO THOSE REMOVED. RESTORE VAPOR INSULATION WITH NEW MATERIALS IDENTICAL TO THOSE REMOVED. RESTORE VAPOR WITH NEW MATERIALS IDENTICAL TO THOSE REMOVED. RESTORE VAPOR WITH NEW MATERIALS IDENTICAL TO THOSE REMOVED. RESTORE VAPOR NEW MATERIALS IDENTICAL TO THOSE REMOVED. RESTORE VAPOR NEW MATERIALS IDENTICAL TO THOSE REMOVED. RESTORE VAPOR MATERIALS IDENTICAL TO THOSE REMOVED. RESTORE VAPOR MATERIALS IDENTICAL TO THOSE REMOVED. RESTORE VAPOR IDENTICAL TO THOSE REMOVED. RESTORE VAPOR IDENTICAL TO THOSE REMOVED. RESTORE VAPOR TO THOSE REMOVED. RESTORE VAPOR TO THOSE REMOVED. RESTORE VAPOR THOSE REMOVED. RESTORE VAPOR THOSE REMOVED. RESTORE VAPOR REMOVED. RESTORE VAPOR REMOVED. RESTORE VAPOR RESTORE VAPOR RESTORE VAPOR VAPOR VAPOR BARRIER AND FINISH ACCORDING TO INSULATION SPECIFICATIONS FOR THIS PROJECT.

AutoCAD SHX Text

5.CHECK AIR FLOW WITHIN INTAKE PLENUMS AND MIXING BOXES OF AIR HANDLING UNITS FOR UNEVEN FLOW CHECK AIR FLOW WITHIN INTAKE PLENUMS AND MIXING BOXES OF AIR HANDLING UNITS FOR UNEVEN FLOW AIR FLOW WITHIN INTAKE PLENUMS AND MIXING BOXES OF AIR HANDLING UNITS FOR UNEVEN FLOW AIR FLOW WITHIN INTAKE PLENUMS AND MIXING BOXES OF AIR HANDLING UNITS FOR UNEVEN FLOW FLOW WITHIN INTAKE PLENUMS AND MIXING BOXES OF AIR HANDLING UNITS FOR UNEVEN FLOW FLOW WITHIN INTAKE PLENUMS AND MIXING BOXES OF AIR HANDLING UNITS FOR UNEVEN FLOW WITHIN INTAKE PLENUMS AND MIXING BOXES OF AIR HANDLING UNITS FOR UNEVEN FLOW WITHIN INTAKE PLENUMS AND MIXING BOXES OF AIR HANDLING UNITS FOR UNEVEN FLOW INTAKE PLENUMS AND MIXING BOXES OF AIR HANDLING UNITS FOR UNEVEN FLOW INTAKE PLENUMS AND MIXING BOXES OF AIR HANDLING UNITS FOR UNEVEN FLOW PLENUMS AND MIXING BOXES OF AIR HANDLING UNITS FOR UNEVEN FLOW PLENUMS AND MIXING BOXES OF AIR HANDLING UNITS FOR UNEVEN FLOW AND MIXING BOXES OF AIR HANDLING UNITS FOR UNEVEN FLOW AND MIXING BOXES OF AIR HANDLING UNITS FOR UNEVEN FLOW MIXING BOXES OF AIR HANDLING UNITS FOR UNEVEN FLOW MIXING BOXES OF AIR HANDLING UNITS FOR UNEVEN FLOW BOXES OF AIR HANDLING UNITS FOR UNEVEN FLOW BOXES OF AIR HANDLING UNITS FOR UNEVEN FLOW OF AIR HANDLING UNITS FOR UNEVEN FLOW OF AIR HANDLING UNITS FOR UNEVEN FLOW AIR HANDLING UNITS FOR UNEVEN FLOW AIR HANDLING UNITS FOR UNEVEN FLOW HANDLING UNITS FOR UNEVEN FLOW HANDLING UNITS FOR UNEVEN FLOW UNITS FOR UNEVEN FLOW UNITS FOR UNEVEN FLOW FOR UNEVEN FLOW FOR UNEVEN FLOW UNEVEN FLOW UNEVEN FLOW FLOW FLOW AND TEMPERATURE STRATIFICATION AND PREPARE A REPORT WITH PROFILE ELEVATIONS (TEMPERATURE AND TEMPERATURE STRATIFICATION AND PREPARE A REPORT WITH PROFILE ELEVATIONS (TEMPERATURE AND TEMPERATURE STRATIFICATION AND PREPARE A REPORT WITH PROFILE ELEVATIONS (TEMPERATURE AND STRATIFICATION AND PREPARE A REPORT WITH PROFILE ELEVATIONS (TEMPERATURE AND STRATIFICATION AND PREPARE A REPORT WITH PROFILE ELEVATIONS (TEMPERATURE AND AND PREPARE A REPORT WITH PROFILE ELEVATIONS (TEMPERATURE AND AND PREPARE A REPORT WITH PROFILE ELEVATIONS (TEMPERATURE AND PREPARE A REPORT WITH PROFILE ELEVATIONS (TEMPERATURE AND PREPARE A REPORT WITH PROFILE ELEVATIONS (TEMPERATURE AND A REPORT WITH PROFILE ELEVATIONS (TEMPERATURE AND A REPORT WITH PROFILE ELEVATIONS (TEMPERATURE AND REPORT WITH PROFILE ELEVATIONS (TEMPERATURE AND REPORT WITH PROFILE ELEVATIONS (TEMPERATURE AND WITH PROFILE ELEVATIONS (TEMPERATURE AND WITH PROFILE ELEVATIONS (TEMPERATURE AND PROFILE ELEVATIONS (TEMPERATURE AND PROFILE ELEVATIONS (TEMPERATURE AND ELEVATIONS (TEMPERATURE AND ELEVATIONS (TEMPERATURE AND (TEMPERATURE AND (TEMPERATURE AND AND AND VELOCITY) ON EACH COIL OR FILTER FACE FOR ARCHITECT.

AutoCAD SHX Text

6.LOCATE START-STOP AND DISCONNECT SWITCHES, ELECTRICAL INTERLOCKS, AND MOTOR STARTERS.LOCATE START-STOP AND DISCONNECT SWITCHES, ELECTRICAL INTERLOCKS, AND MOTOR STARTERS.

AutoCAD SHX Text

7.VERIFY THAT MOTOR STARTERS ARE EQUIPPED WITH PROPERLY SIZED THERMAL PROTECTION.VERIFY THAT MOTOR STARTERS ARE EQUIPPED WITH PROPERLY SIZED THERMAL PROTECTION.

AutoCAD SHX Text

8.CHECK DAMPERS FOR PROPER POSITION TO ACHIEVE DESIRED AIRFLOW PATH.CHECK DAMPERS FOR PROPER POSITION TO ACHIEVE DESIRED AIRFLOW PATH.

AutoCAD SHX Text

9.CHECK FOR AIRFLOW BLOCKAGES.CHECK FOR AIRFLOW BLOCKAGES.

AutoCAD SHX Text

10.CHECK CONDENSATE DRAINS FOR PROPER CONNECTIONS AND FUNCTIONING.CHECK CONDENSATE DRAINS FOR PROPER CONNECTIONS AND FUNCTIONING.

AutoCAD SHX Text

11.CHECK FOR PROPER SEALING OF AIR-HANDLING UNIT COMPONENTS.CHECK FOR PROPER SEALING OF AIR-HANDLING UNIT COMPONENTS.

AutoCAD SHX Text

12.CHECK FOR PROPER SEALING OF AIR DUCT SYSTEM.CHECK FOR PROPER SEALING OF AIR DUCT SYSTEM.

AutoCAD SHX Text

C.TOLERANCES:TOLERANCES:

AutoCAD SHX Text

1.SET HVAC SYSTEM AIRFLOW AND WATER FLOW RATES WITHIN THE FOLLOWING TOLERANCES:SET HVAC SYSTEM AIRFLOW AND WATER FLOW RATES WITHIN THE FOLLOWING TOLERANCES:

AutoCAD SHX Text

a.AIR HANDLING EQUIPMENT AND OUTLETS: PLUS OR MINUS 5 PERCENT. AIR HANDLING EQUIPMENT AND OUTLETS: PLUS OR MINUS 5 PERCENT.

AutoCAD SHX Text

METAL DUCTS

AutoCAD SHX Text

A.SHEET METAL MATERIALS: COMPLY WITH SMACNA'S "HVAC DUCT CONSTRUCTION STANDARDS--METAL AND SHEET METAL MATERIALS: COMPLY WITH SMACNA'S "HVAC DUCT CONSTRUCTION STANDARDS--METAL AND METAL MATERIALS: COMPLY WITH SMACNA'S "HVAC DUCT CONSTRUCTION STANDARDS--METAL AND METAL MATERIALS: COMPLY WITH SMACNA'S "HVAC DUCT CONSTRUCTION STANDARDS--METAL AND MATERIALS: COMPLY WITH SMACNA'S "HVAC DUCT CONSTRUCTION STANDARDS--METAL AND MATERIALS: COMPLY WITH SMACNA'S "HVAC DUCT CONSTRUCTION STANDARDS--METAL AND COMPLY WITH SMACNA'S "HVAC DUCT CONSTRUCTION STANDARDS--METAL AND COMPLY WITH SMACNA'S "HVAC DUCT CONSTRUCTION STANDARDS--METAL AND COMPLY WITH SMACNA'S "HVAC DUCT CONSTRUCTION STANDARDS--METAL AND WITH SMACNA'S "HVAC DUCT CONSTRUCTION STANDARDS--METAL AND WITH SMACNA'S "HVAC DUCT CONSTRUCTION STANDARDS--METAL AND SMACNA'S "HVAC DUCT CONSTRUCTION STANDARDS--METAL AND SMACNA'S "HVAC DUCT CONSTRUCTION STANDARDS--METAL AND "HVAC DUCT CONSTRUCTION STANDARDS--METAL AND "HVAC DUCT CONSTRUCTION STANDARDS--METAL AND DUCT CONSTRUCTION STANDARDS--METAL AND DUCT CONSTRUCTION STANDARDS--METAL AND CONSTRUCTION STANDARDS--METAL AND CONSTRUCTION STANDARDS--METAL AND STANDARDS--METAL AND STANDARDS--METAL AND AND AND FLEXIBLE" FOR ACCEPTABLE MATERIALS, MATERIAL THICKNESSES, AND DUCT CONSTRUCTION METHODS, UNLESS FOR ACCEPTABLE MATERIALS, MATERIAL THICKNESSES, AND DUCT CONSTRUCTION METHODS, UNLESS FOR ACCEPTABLE MATERIALS, MATERIAL THICKNESSES, AND DUCT CONSTRUCTION METHODS, UNLESS ACCEPTABLE MATERIALS, MATERIAL THICKNESSES, AND DUCT CONSTRUCTION METHODS, UNLESS ACCEPTABLE MATERIALS, MATERIAL THICKNESSES, AND DUCT CONSTRUCTION METHODS, UNLESS MATERIALS, MATERIAL THICKNESSES, AND DUCT CONSTRUCTION METHODS, UNLESS MATERIALS, MATERIAL THICKNESSES, AND DUCT CONSTRUCTION METHODS, UNLESS MATERIAL THICKNESSES, AND DUCT CONSTRUCTION METHODS, UNLESS MATERIAL THICKNESSES, AND DUCT CONSTRUCTION METHODS, UNLESS THICKNESSES, AND DUCT CONSTRUCTION METHODS, UNLESS THICKNESSES, AND DUCT CONSTRUCTION METHODS, UNLESS AND DUCT CONSTRUCTION METHODS, UNLESS AND DUCT CONSTRUCTION METHODS, UNLESS DUCT CONSTRUCTION METHODS, UNLESS DUCT CONSTRUCTION METHODS, UNLESS CONSTRUCTION METHODS, UNLESS CONSTRUCTION METHODS, UNLESS METHODS, UNLESS METHODS, UNLESS UNLESS UNLESS OTHERWISE INDICATED. SHEET METAL MATERIALS SHALL BE FREE OF PITTING, SEAM MARKS, ROLLER MARKS, INDICATED. SHEET METAL MATERIALS SHALL BE FREE OF PITTING, SEAM MARKS, ROLLER MARKS, INDICATED. SHEET METAL MATERIALS SHALL BE FREE OF PITTING, SEAM MARKS, ROLLER MARKS, SHEET METAL MATERIALS SHALL BE FREE OF PITTING, SEAM MARKS, ROLLER MARKS, SHEET METAL MATERIALS SHALL BE FREE OF PITTING, SEAM MARKS, ROLLER MARKS, METAL MATERIALS SHALL BE FREE OF PITTING, SEAM MARKS, ROLLER MARKS, METAL MATERIALS SHALL BE FREE OF PITTING, SEAM MARKS, ROLLER MARKS, MATERIALS SHALL BE FREE OF PITTING, SEAM MARKS, ROLLER MARKS, MATERIALS SHALL BE FREE OF PITTING, SEAM MARKS, ROLLER MARKS, SHALL BE FREE OF PITTING, SEAM MARKS, ROLLER MARKS, SHALL BE FREE OF PITTING, SEAM MARKS, ROLLER MARKS, BE FREE OF PITTING, SEAM MARKS, ROLLER MARKS, BE FREE OF PITTING, SEAM MARKS, ROLLER MARKS, FREE OF PITTING, SEAM MARKS, ROLLER MARKS, FREE OF PITTING, SEAM MARKS, ROLLER MARKS, OF PITTING, SEAM MARKS, ROLLER MARKS, OF PITTING, SEAM MARKS, ROLLER MARKS, PITTING, SEAM MARKS, ROLLER MARKS, PITTING, SEAM MARKS, ROLLER MARKS, SEAM MARKS, ROLLER MARKS, SEAM MARKS, ROLLER MARKS, MARKS, ROLLER MARKS, MARKS, ROLLER MARKS, ROLLER MARKS, ROLLER MARKS, MARKS, MARKS, STAINS, DISCOLORATIONS, AND OTHER IMPERFECTIONS.

AutoCAD SHX Text

1.GALVANIZED SHEET STEEL: LOCK-FORMING QUALITY; COMPLYING WITH ASTM A 653/A 653M AND HAVING GALVANIZED SHEET STEEL: LOCK-FORMING QUALITY; COMPLYING WITH ASTM A 653/A 653M AND HAVING SHEET STEEL: LOCK-FORMING QUALITY; COMPLYING WITH ASTM A 653/A 653M AND HAVING SHEET STEEL: LOCK-FORMING QUALITY; COMPLYING WITH ASTM A 653/A 653M AND HAVING STEEL: LOCK-FORMING QUALITY; COMPLYING WITH ASTM A 653/A 653M AND HAVING STEEL: LOCK-FORMING QUALITY; COMPLYING WITH ASTM A 653/A 653M AND HAVING LOCK-FORMING QUALITY; COMPLYING WITH ASTM A 653/A 653M AND HAVING LOCK-FORMING QUALITY; COMPLYING WITH ASTM A 653/A 653M AND HAVING QUALITY; COMPLYING WITH ASTM A 653/A 653M AND HAVING QUALITY; COMPLYING WITH ASTM A 653/A 653M AND HAVING COMPLYING WITH ASTM A 653/A 653M AND HAVING COMPLYING WITH ASTM A 653/A 653M AND HAVING WITH ASTM A 653/A 653M AND HAVING WITH ASTM A 653/A 653M AND HAVING ASTM A 653/A 653M AND HAVING ASTM A 653/A 653M AND HAVING A 653/A 653M AND HAVING A 653/A 653M AND HAVING 653/A 653M AND HAVING 653/A 653M AND HAVING 653M AND HAVING 653M AND HAVING AND HAVING AND HAVING HAVING HAVING G90 COATING DESIGNATION; DUCTS SHALL HAVE MILL-PHOSPHATIZED FINISH FOR SURFACES EXPOSED TO COATING DESIGNATION; DUCTS SHALL HAVE MILL-PHOSPHATIZED FINISH FOR SURFACES EXPOSED TO COATING DESIGNATION; DUCTS SHALL HAVE MILL-PHOSPHATIZED FINISH FOR SURFACES EXPOSED TO DESIGNATION; DUCTS SHALL HAVE MILL-PHOSPHATIZED FINISH FOR SURFACES EXPOSED TO DESIGNATION; DUCTS SHALL HAVE MILL-PHOSPHATIZED FINISH FOR SURFACES EXPOSED TO DUCTS SHALL HAVE MILL-PHOSPHATIZED FINISH FOR SURFACES EXPOSED TO DUCTS SHALL HAVE MILL-PHOSPHATIZED FINISH FOR SURFACES EXPOSED TO SHALL HAVE MILL-PHOSPHATIZED FINISH FOR SURFACES EXPOSED TO SHALL HAVE MILL-PHOSPHATIZED FINISH FOR SURFACES EXPOSED TO HAVE MILL-PHOSPHATIZED FINISH FOR SURFACES EXPOSED TO HAVE MILL-PHOSPHATIZED FINISH FOR SURFACES EXPOSED TO MILL-PHOSPHATIZED FINISH FOR SURFACES EXPOSED TO MILL-PHOSPHATIZED FINISH FOR SURFACES EXPOSED TO FINISH FOR SURFACES EXPOSED TO FINISH FOR SURFACES EXPOSED TO FOR SURFACES EXPOSED TO FOR SURFACES EXPOSED TO SURFACES EXPOSED TO SURFACES EXPOSED TO EXPOSED TO EXPOSED TO TO TO VIEW.

AutoCAD SHX Text

2.STAINLESS STEEL: ASTM A 480/A 480M, TYPE 316. STAINLESS STEEL: ASTM A 480/A 480M, TYPE 316.

AutoCAD SHX Text

3.REINFORCEMENT SHAPES AND PLATES: GALVANIZED-STEEL REINFORCEMENT WHERE INSTALLED ON REINFORCEMENT SHAPES AND PLATES: GALVANIZED-STEEL REINFORCEMENT WHERE INSTALLED ON SHAPES AND PLATES: GALVANIZED-STEEL REINFORCEMENT WHERE INSTALLED ON SHAPES AND PLATES: GALVANIZED-STEEL REINFORCEMENT WHERE INSTALLED ON AND PLATES: GALVANIZED-STEEL REINFORCEMENT WHERE INSTALLED ON AND PLATES: GALVANIZED-STEEL REINFORCEMENT WHERE INSTALLED ON PLATES: GALVANIZED-STEEL REINFORCEMENT WHERE INSTALLED ON PLATES: GALVANIZED-STEEL REINFORCEMENT WHERE INSTALLED ON GALVANIZED-STEEL REINFORCEMENT WHERE INSTALLED ON GALVANIZED-STEEL REINFORCEMENT WHERE INSTALLED ON REINFORCEMENT WHERE INSTALLED ON REINFORCEMENT WHERE INSTALLED ON WHERE INSTALLED ON WHERE INSTALLED ON INSTALLED ON INSTALLED ON ON ON GALVANIZED SHEET METAL DUCTS.

AutoCAD SHX Text

B.SEALANT MATERIALS:SEALANT MATERIALS:

AutoCAD SHX Text

1.JOINT AND SEAM SEALANTS, GENERAL: THE TERM "SEALANT" IS NOT LIMITED SOLELY TO MATERIALS OF JOINT AND SEAM SEALANTS, GENERAL: THE TERM "SEALANT" IS NOT LIMITED SOLELY TO MATERIALS OF AND SEAM SEALANTS, GENERAL: THE TERM "SEALANT" IS NOT LIMITED SOLELY TO MATERIALS OF AND SEAM SEALANTS, GENERAL: THE TERM "SEALANT" IS NOT LIMITED SOLELY TO MATERIALS OF SEAM SEALANTS, GENERAL: THE TERM "SEALANT" IS NOT LIMITED SOLELY TO MATERIALS OF SEAM SEALANTS, GENERAL: THE TERM "SEALANT" IS NOT LIMITED SOLELY TO MATERIALS OF SEALANTS, GENERAL: THE TERM "SEALANT" IS NOT LIMITED SOLELY TO MATERIALS OF SEALANTS, GENERAL: THE TERM "SEALANT" IS NOT LIMITED SOLELY TO MATERIALS OF GENERAL: THE TERM "SEALANT" IS NOT LIMITED SOLELY TO MATERIALS OF GENERAL: THE TERM "SEALANT" IS NOT LIMITED SOLELY TO MATERIALS OF THE TERM "SEALANT" IS NOT LIMITED SOLELY TO MATERIALS OF THE TERM "SEALANT" IS NOT LIMITED SOLELY TO MATERIALS OF TERM "SEALANT" IS NOT LIMITED SOLELY TO MATERIALS OF TERM "SEALANT" IS NOT LIMITED SOLELY TO MATERIALS OF "SEALANT" IS NOT LIMITED SOLELY TO MATERIALS OF "SEALANT" IS NOT LIMITED SOLELY TO MATERIALS OF IS NOT LIMITED SOLELY TO MATERIALS OF IS NOT LIMITED SOLELY TO MATERIALS OF NOT LIMITED SOLELY TO MATERIALS OF NOT LIMITED SOLELY TO MATERIALS OF LIMITED SOLELY TO MATERIALS OF LIMITED SOLELY TO MATERIALS OF SOLELY TO MATERIALS OF SOLELY TO MATERIALS OF TO MATERIALS OF TO MATERIALS OF MATERIALS OF MATERIALS OF OF OF MASTIC NATURE BUT ALSO INCLUDES TWO-PART ADHESIVE/OPEN-WEAVE FABRIC STRIP SYSTEMS, AND NATURE BUT ALSO INCLUDES TWO-PART ADHESIVE/OPEN-WEAVE FABRIC STRIP SYSTEMS, AND NATURE BUT ALSO INCLUDES TWO-PART ADHESIVE/OPEN-WEAVE FABRIC STRIP SYSTEMS, AND BUT ALSO INCLUDES TWO-PART ADHESIVE/OPEN-WEAVE FABRIC STRIP SYSTEMS, AND BUT ALSO INCLUDES TWO-PART ADHESIVE/OPEN-WEAVE FABRIC STRIP SYSTEMS, AND ALSO INCLUDES TWO-PART ADHESIVE/OPEN-WEAVE FABRIC STRIP SYSTEMS, AND ALSO INCLUDES TWO-PART ADHESIVE/OPEN-WEAVE FABRIC STRIP SYSTEMS, AND INCLUDES TWO-PART ADHESIVE/OPEN-WEAVE FABRIC STRIP SYSTEMS, AND INCLUDES TWO-PART ADHESIVE/OPEN-WEAVE FABRIC STRIP SYSTEMS, AND TWO-PART ADHESIVE/OPEN-WEAVE FABRIC STRIP SYSTEMS, AND TWO-PART ADHESIVE/OPEN-WEAVE FABRIC STRIP SYSTEMS, AND ADHESIVE/OPEN-WEAVE FABRIC STRIP SYSTEMS, AND ADHESIVE/OPEN-WEAVE FABRIC STRIP SYSTEMS, AND FABRIC STRIP SYSTEMS, AND FABRIC STRIP SYSTEMS, AND STRIP SYSTEMS, AND STRIP SYSTEMS, AND SYSTEMS, AND SYSTEMS, AND AND AND ELASTOMERIC SEALANT TAPE.

AutoCAD SHX Text

2.ELASTOMERIC SEALANT TAPE: 3 INCHES WIDE; MODIFIED BUTYL ADHESIVE BACKED. ELASTOMERIC SEALANT TAPE: 3 INCHES WIDE; MODIFIED BUTYL ADHESIVE BACKED.

AutoCAD SHX Text

a.MANUFACTURERS: HARDCAST; FOIL-GRIP 1402 AND FOIL-GRIP 1402-181BFX.MANUFACTURERS: HARDCAST; FOIL-GRIP 1402 AND FOIL-GRIP 1402-181BFX.

AutoCAD SHX Text

3.WATER-BASED JOINT AND SEAM SEALANT: FLEXIBLE, MASTIC SEALANT, RESISTANT TO UV LIGHT WHEN WATER-BASED JOINT AND SEAM SEALANT: FLEXIBLE, MASTIC SEALANT, RESISTANT TO UV LIGHT WHEN JOINT AND SEAM SEALANT: FLEXIBLE, MASTIC SEALANT, RESISTANT TO UV LIGHT WHEN JOINT AND SEAM SEALANT: FLEXIBLE, MASTIC SEALANT, RESISTANT TO UV LIGHT WHEN AND SEAM SEALANT: FLEXIBLE, MASTIC SEALANT, RESISTANT TO UV LIGHT WHEN AND SEAM SEALANT: FLEXIBLE, MASTIC SEALANT, RESISTANT TO UV LIGHT WHEN SEAM SEALANT: FLEXIBLE, MASTIC SEALANT, RESISTANT TO UV LIGHT WHEN SEAM SEALANT: FLEXIBLE, MASTIC SEALANT, RESISTANT TO UV LIGHT WHEN SEALANT: FLEXIBLE, MASTIC SEALANT, RESISTANT TO UV LIGHT WHEN SEALANT: FLEXIBLE, MASTIC SEALANT, RESISTANT TO UV LIGHT WHEN FLEXIBLE, MASTIC SEALANT, RESISTANT TO UV LIGHT WHEN FLEXIBLE, MASTIC SEALANT, RESISTANT TO UV LIGHT WHEN MASTIC SEALANT, RESISTANT TO UV LIGHT WHEN MASTIC SEALANT, RESISTANT TO UV LIGHT WHEN SEALANT, RESISTANT TO UV LIGHT WHEN SEALANT, RESISTANT TO UV LIGHT WHEN RESISTANT TO UV LIGHT WHEN RESISTANT TO UV LIGHT WHEN TO UV LIGHT WHEN TO UV LIGHT WHEN UV LIGHT WHEN UV LIGHT WHEN LIGHT WHEN LIGHT WHEN WHEN WHEN CURED, UL 723 LISTED, AND COMPLYING WITH NFPA REQUIREMENTS FOR CLASS 1 DUCTS.

AutoCAD SHX Text

a. MANUFACTURERS: HARDCAST; FLEX-GRIP 550 AND VERSA-GRIP 181 | POLYMER ADHESIVES; NO. 11 | MANUFACTURERS: HARDCAST; FLEX-GRIP 550 AND VERSA-GRIP 181 | POLYMER ADHESIVES; NO. 11 | MANUFACTURERS: HARDCAST; FLEX-GRIP 550 AND VERSA-GRIP 181 | POLYMER ADHESIVES; NO. 11 | HARDCAST; FLEX-GRIP 550 AND VERSA-GRIP 181 | POLYMER ADHESIVES; NO. 11 | HARDCAST; FLEX-GRIP 550 AND VERSA-GRIP 181 | POLYMER ADHESIVES; NO. 11 | HARDCAST; FLEX-GRIP 550 AND VERSA-GRIP 181 | POLYMER ADHESIVES; NO. 11 | FLEX-GRIP 550 AND VERSA-GRIP 181 | POLYMER ADHESIVES; NO. 11 | FLEX-GRIP 550 AND VERSA-GRIP 181 | POLYMER ADHESIVES; NO. 11 | 550 AND VERSA-GRIP 181 | POLYMER ADHESIVES; NO. 11 | 550 AND VERSA-GRIP 181 | POLYMER ADHESIVES; NO. 11 | AND VERSA-GRIP 181 | POLYMER ADHESIVES; NO. 11 | AND VERSA-GRIP 181 | POLYMER ADHESIVES; NO. 11 | VERSA-GRIP 181 | POLYMER ADHESIVES; NO. 11 | VERSA-GRIP 181 | POLYMER ADHESIVES; NO. 11 | 181 | POLYMER ADHESIVES; NO. 11 | 181 | POLYMER ADHESIVES; NO. 11 | | POLYMER ADHESIVES; NO. 11 | | POLYMER ADHESIVES; NO. 11 | POLYMER ADHESIVES; NO. 11 | POLYMER ADHESIVES; NO. 11 | ADHESIVES; NO. 11 | ADHESIVES; NO. 11 | NO. 11 | NO. 11 | 11 | 11 | | | UNITED MCGILL.

AutoCAD SHX Text

4.FLANGED JOINT MASTIC: ONE-PART, ACID-CURING, ELASTOMERIC JOINT SEALANT COMPLYING WITH ASTM C FLANGED JOINT MASTIC: ONE-PART, ACID-CURING, ELASTOMERIC JOINT SEALANT COMPLYING WITH ASTM C JOINT MASTIC: ONE-PART, ACID-CURING, ELASTOMERIC JOINT SEALANT COMPLYING WITH ASTM C JOINT MASTIC: ONE-PART, ACID-CURING, ELASTOMERIC JOINT SEALANT COMPLYING WITH ASTM C MASTIC: ONE-PART, ACID-CURING, ELASTOMERIC JOINT SEALANT COMPLYING WITH ASTM C MASTIC: ONE-PART, ACID-CURING, ELASTOMERIC JOINT SEALANT COMPLYING WITH ASTM C ONE-PART, ACID-CURING, ELASTOMERIC JOINT SEALANT COMPLYING WITH ASTM C ONE-PART, ACID-CURING, ELASTOMERIC JOINT SEALANT COMPLYING WITH ASTM C ACID-CURING, ELASTOMERIC JOINT SEALANT COMPLYING WITH ASTM C ACID-CURING, ELASTOMERIC JOINT SEALANT COMPLYING WITH ASTM C ELASTOMERIC JOINT SEALANT COMPLYING WITH ASTM C ELASTOMERIC JOINT SEALANT COMPLYING WITH ASTM C JOINT SEALANT COMPLYING WITH ASTM C JOINT SEALANT COMPLYING WITH ASTM C SEALANT COMPLYING WITH ASTM C SEALANT COMPLYING WITH ASTM C COMPLYING WITH ASTM C COMPLYING WITH ASTM C WITH ASTM C WITH ASTM C ASTM C ASTM C C C 920, TYPE S, GRADE NS, CLASS 25, USE O.

AutoCAD SHX Text

5.GASKETS: CHLOROPRENE ELASTOMER, 40 DUROMETER, 1/8 INCH THICK, FULL FACE, ONE PIECE VULCANIZED GASKETS: CHLOROPRENE ELASTOMER, 40 DUROMETER, 1/8 INCH THICK, FULL FACE, ONE PIECE VULCANIZED CHLOROPRENE ELASTOMER, 40 DUROMETER, 1/8 INCH THICK, FULL FACE, ONE PIECE VULCANIZED CHLOROPRENE ELASTOMER, 40 DUROMETER, 1/8 INCH THICK, FULL FACE, ONE PIECE VULCANIZED ELASTOMER, 40 DUROMETER, 1/8 INCH THICK, FULL FACE, ONE PIECE VULCANIZED ELASTOMER, 40 DUROMETER, 1/8 INCH THICK, FULL FACE, ONE PIECE VULCANIZED 40 DUROMETER, 1/8 INCH THICK, FULL FACE, ONE PIECE VULCANIZED 40 DUROMETER, 1/8 INCH THICK, FULL FACE, ONE PIECE VULCANIZED DUROMETER, 1/8 INCH THICK, FULL FACE, ONE PIECE VULCANIZED DUROMETER, 1/8 INCH THICK, FULL FACE, ONE PIECE VULCANIZED 1/8 INCH THICK, FULL FACE, ONE PIECE VULCANIZED 1/8 INCH THICK, FULL FACE, ONE PIECE VULCANIZED INCH THICK, FULL FACE, ONE PIECE VULCANIZED INCH THICK, FULL FACE, ONE PIECE VULCANIZED THICK, FULL FACE, ONE PIECE VULCANIZED THICK, FULL FACE, ONE PIECE VULCANIZED FULL FACE, ONE PIECE VULCANIZED FULL FACE, ONE PIECE VULCANIZED FACE, ONE PIECE VULCANIZED FACE, ONE PIECE VULCANIZED ONE PIECE VULCANIZED ONE PIECE VULCANIZED PIECE VULCANIZED PIECE VULCANIZED VULCANIZED VULCANIZED OR DOVETAILED AT JOINTS.

AutoCAD SHX Text

C.HANGERS AND SUPPORTS:HANGERS AND SUPPORTS:

AutoCAD SHX Text

1.BUILDING ATTACHMENTS: CONCRETE INSERTS, OR STRUCTURAL-STEEL FASTENERS APPROPRIATE FOR BUILDING ATTACHMENTS: CONCRETE INSERTS, OR STRUCTURAL-STEEL FASTENERS APPROPRIATE FOR ATTACHMENTS: CONCRETE INSERTS, OR STRUCTURAL-STEEL FASTENERS APPROPRIATE FOR ATTACHMENTS: CONCRETE INSERTS, OR STRUCTURAL-STEEL FASTENERS APPROPRIATE FOR CONCRETE INSERTS, OR STRUCTURAL-STEEL FASTENERS APPROPRIATE FOR CONCRETE INSERTS, OR STRUCTURAL-STEEL FASTENERS APPROPRIATE FOR INSERTS, OR STRUCTURAL-STEEL FASTENERS APPROPRIATE FOR INSERTS, OR STRUCTURAL-STEEL FASTENERS APPROPRIATE FOR OR STRUCTURAL-STEEL FASTENERS APPROPRIATE FOR OR STRUCTURAL-STEEL FASTENERS APPROPRIATE FOR STRUCTURAL-STEEL FASTENERS APPROPRIATE FOR STRUCTURAL-STEEL FASTENERS APPROPRIATE FOR FASTENERS APPROPRIATE FOR FASTENERS APPROPRIATE FOR APPROPRIATE FOR APPROPRIATE FOR FOR FOR CONSTRUCTION MATERIALS TO WHICH HANGERS ARE BEING ATTACHED.

AutoCAD SHX Text

2.HANGER MATERIALS: GALVANIZED SHEET STEEL OR THREADED STEEL ROD.HANGER MATERIALS: GALVANIZED SHEET STEEL OR THREADED STEEL ROD.

AutoCAD SHX Text

3.DUCT ATTACHMENTS: SHEET METAL SCREWS, BLIND RIVETS, OR SELF-TAPPING METAL SCREWS; COMPATIBLE DUCT ATTACHMENTS: SHEET METAL SCREWS, BLIND RIVETS, OR SELF-TAPPING METAL SCREWS; COMPATIBLE ATTACHMENTS: SHEET METAL SCREWS, BLIND RIVETS, OR SELF-TAPPING METAL SCREWS; COMPATIBLE ATTACHMENTS: SHEET METAL SCREWS, BLIND RIVETS, OR SELF-TAPPING METAL SCREWS; COMPATIBLE SHEET METAL SCREWS, BLIND RIVETS, OR SELF-TAPPING METAL SCREWS; COMPATIBLE SHEET METAL SCREWS, BLIND RIVETS, OR SELF-TAPPING METAL SCREWS; COMPATIBLE METAL SCREWS, BLIND RIVETS, OR SELF-TAPPING METAL SCREWS; COMPATIBLE METAL SCREWS, BLIND RIVETS, OR SELF-TAPPING METAL SCREWS; COMPATIBLE SCREWS, BLIND RIVETS, OR SELF-TAPPING METAL SCREWS; COMPATIBLE SCREWS, BLIND RIVETS, OR SELF-TAPPING METAL SCREWS; COMPATIBLE BLIND RIVETS, OR SELF-TAPPING METAL SCREWS; COMPATIBLE BLIND RIVETS, OR SELF-TAPPING METAL SCREWS; COMPATIBLE RIVETS, OR SELF-TAPPING METAL SCREWS; COMPATIBLE RIVETS, OR SELF-TAPPING METAL SCREWS; COMPATIBLE OR SELF-TAPPING METAL SCREWS; COMPATIBLE OR SELF-TAPPING METAL SCREWS; COMPATIBLE SELF-TAPPING METAL SCREWS; COMPATIBLE SELF-TAPPING METAL SCREWS; COMPATIBLE METAL SCREWS; COMPATIBLE METAL SCREWS; COMPATIBLE SCREWS; COMPATIBLE SCREWS; COMPATIBLE COMPATIBLE COMPATIBLE WITH DUCT MATERIALS. ATTACHMENTS FOR STAINLESS STEEL AND PVC-COATED DUCT SHALL BE STAINLESS DUCT MATERIALS. ATTACHMENTS FOR STAINLESS STEEL AND PVC-COATED DUCT SHALL BE STAINLESS DUCT MATERIALS. ATTACHMENTS FOR STAINLESS STEEL AND PVC-COATED DUCT SHALL BE STAINLESS MATERIALS. ATTACHMENTS FOR STAINLESS STEEL AND PVC-COATED DUCT SHALL BE STAINLESS MATERIALS. ATTACHMENTS FOR STAINLESS STEEL AND PVC-COATED DUCT SHALL BE STAINLESS ATTACHMENTS FOR STAINLESS STEEL AND PVC-COATED DUCT SHALL BE STAINLESS ATTACHMENTS FOR STAINLESS STEEL AND PVC-COATED DUCT SHALL BE STAINLESS FOR STAINLESS STEEL AND PVC-COATED DUCT SHALL BE STAINLESS FOR STAINLESS STEEL AND PVC-COATED DUCT SHALL BE STAINLESS STAINLESS STEEL AND PVC-COATED DUCT SHALL BE STAINLESS STAINLESS STEEL AND PVC-COATED DUCT SHALL BE STAINLESS STEEL AND PVC-COATED DUCT SHALL BE STAINLESS STEEL AND PVC-COATED DUCT SHALL BE STAINLESS AND PVC-COATED DUCT SHALL BE STAINLESS AND PVC-COATED DUCT SHALL BE STAINLESS PVC-COATED DUCT SHALL BE STAINLESS PVC-COATED DUCT SHALL BE STAINLESS DUCT SHALL BE STAINLESS DUCT SHALL BE STAINLESS SHALL BE STAINLESS SHALL BE STAINLESS BE STAINLESS BE STAINLESS STAINLESS STAINLESS STEEL.

AutoCAD SHX Text

4.TRAPEZE AND RISER SUPPORTS: STEEL SHAPES COMPLYING WITH ASTM A 36/A 36M.TRAPEZE AND RISER SUPPORTS: STEEL SHAPES COMPLYING WITH ASTM A 36/A 36M.

AutoCAD SHX Text

5.LOAD RATED CABLE SUSPENSION SYSTEM: TESTED TO FIVE TIMES THE SAFE WORKING LOADS AND VERIFIED LOAD RATED CABLE SUSPENSION SYSTEM: TESTED TO FIVE TIMES THE SAFE WORKING LOADS AND VERIFIED RATED CABLE SUSPENSION SYSTEM: TESTED TO FIVE TIMES THE SAFE WORKING LOADS AND VERIFIED RATED CABLE SUSPENSION SYSTEM: TESTED TO FIVE TIMES THE SAFE WORKING LOADS AND VERIFIED CABLE SUSPENSION SYSTEM: TESTED TO FIVE TIMES THE SAFE WORKING LOADS AND VERIFIED CABLE SUSPENSION SYSTEM: TESTED TO FIVE TIMES THE SAFE WORKING LOADS AND VERIFIED SUSPENSION SYSTEM: TESTED TO FIVE TIMES THE SAFE WORKING LOADS AND VERIFIED SUSPENSION SYSTEM: TESTED TO FIVE TIMES THE SAFE WORKING LOADS AND VERIFIED SYSTEM: TESTED TO FIVE TIMES THE SAFE WORKING LOADS AND VERIFIED SYSTEM: TESTED TO FIVE TIMES THE SAFE WORKING LOADS AND VERIFIED TESTED TO FIVE TIMES THE SAFE WORKING LOADS AND VERIFIED TESTED TO FIVE TIMES THE SAFE WORKING LOADS AND VERIFIED TO FIVE TIMES THE SAFE WORKING LOADS AND VERIFIED TO FIVE TIMES THE SAFE WORKING LOADS AND VERIFIED FIVE TIMES THE SAFE WORKING LOADS AND VERIFIED FIVE TIMES THE SAFE WORKING LOADS AND VERIFIED TIMES THE SAFE WORKING LOADS AND VERIFIED TIMES THE SAFE WORKING LOADS AND VERIFIED THE SAFE WORKING LOADS AND VERIFIED THE SAFE WORKING LOADS AND VERIFIED SAFE WORKING LOADS AND VERIFIED SAFE WORKING LOADS AND VERIFIED WORKING LOADS AND VERIFIED WORKING LOADS AND VERIFIED LOADS AND VERIFIED LOADS AND VERIFIED AND VERIFIED AND VERIFIED VERIFIED VERIFIED BY THE SMACNA TESTING AND RESEARCH INSTITUTE.

AutoCAD SHX Text

a.MANUFACTURERS: DUCTMATE INDUSTRIES, INC., CLUTCHER AND EZ-LOCK | DURO DYNE CORP., MANUFACTURERS: DUCTMATE INDUSTRIES, INC., CLUTCHER AND EZ-LOCK | DURO DYNE CORP., DUCTMATE INDUSTRIES, INC., CLUTCHER AND EZ-LOCK | DURO DYNE CORP., DUCTMATE INDUSTRIES, INC., CLUTCHER AND EZ-LOCK | DURO DYNE CORP., DUCTMATE INDUSTRIES, INC., CLUTCHER AND EZ-LOCK | DURO DYNE CORP., INDUSTRIES, INC., CLUTCHER AND EZ-LOCK | DURO DYNE CORP., INDUSTRIES, INC., CLUTCHER AND EZ-LOCK | DURO DYNE CORP., INC., CLUTCHER AND EZ-LOCK | DURO DYNE CORP., INC., CLUTCHER AND EZ-LOCK | DURO DYNE CORP., CLUTCHER AND EZ-LOCK | DURO DYNE CORP., CLUTCHER AND EZ-LOCK | DURO DYNE CORP., AND EZ-LOCK | DURO DYNE CORP., AND EZ-LOCK | DURO DYNE CORP., EZ-LOCK | DURO DYNE CORP., EZ-LOCK | DURO DYNE CORP., | DURO DYNE CORP., | DURO DYNE CORP., DURO DYNE CORP., DURO DYNE CORP., DYNE CORP., DYNE CORP., CORP., CORP., DYNA-TITE SYSTEM | GRIPPLE INC., HANG-FAST SYSTEM.

AutoCAD SHX Text

6.WELDED SUPPORTS: STRUCTURAL STEEL SHAPES WITH ZINC RICH PAINT. EQUIVALENT, PROPRIETARY DESIGN WELDED SUPPORTS: STRUCTURAL STEEL SHAPES WITH ZINC RICH PAINT. EQUIVALENT, PROPRIETARY DESIGN SUPPORTS: STRUCTURAL STEEL SHAPES WITH ZINC RICH PAINT. EQUIVALENT, PROPRIETARY DESIGN SUPPORTS: STRUCTURAL STEEL SHAPES WITH ZINC RICH PAINT. EQUIVALENT, PROPRIETARY DESIGN STRUCTURAL STEEL SHAPES WITH ZINC RICH PAINT. EQUIVALENT, PROPRIETARY DESIGN STRUCTURAL STEEL SHAPES WITH ZINC RICH PAINT. EQUIVALENT, PROPRIETARY DESIGN STEEL SHAPES WITH ZINC RICH PAINT. EQUIVALENT, PROPRIETARY DESIGN STEEL SHAPES WITH ZINC RICH PAINT. EQUIVALENT, PROPRIETARY DESIGN SHAPES WITH ZINC RICH PAINT. EQUIVALENT, PROPRIETARY DESIGN SHAPES WITH ZINC RICH PAINT. EQUIVALENT, PROPRIETARY DESIGN WITH ZINC RICH PAINT. EQUIVALENT, PROPRIETARY DESIGN WITH ZINC RICH PAINT. EQUIVALENT, PROPRIETARY DESIGN ZINC RICH PAINT. EQUIVALENT, PROPRIETARY DESIGN ZINC RICH PAINT. EQUIVALENT, PROPRIETARY DESIGN RICH PAINT. EQUIVALENT, PROPRIETARY DESIGN RICH PAINT. EQUIVALENT, PROPRIETARY DESIGN PAINT. EQUIVALENT, PROPRIETARY DESIGN PAINT. EQUIVALENT, PROPRIETARY DESIGN EQUIVALENT, PROPRIETARY DESIGN EQUIVALENT, PROPRIETARY DESIGN PROPRIETARY DESIGN PROPRIETARY DESIGN DESIGN DESIGN ROLLED STEEL STRUCTURAL SUPPORT SYSTEMS MAY BE USED IN LIEU OF MILL ROLLED STRUCTURAL STEEL.

AutoCAD SHX Text

D.RECTANGULAR DUCT FABRICATION: FABRICATE DUCTS, ELBOWS, TRANSITIONS, OFFSETS, BRANCH CONNECTIONS, RECTANGULAR DUCT FABRICATION: FABRICATE DUCTS, ELBOWS, TRANSITIONS, OFFSETS, BRANCH CONNECTIONS, DUCT FABRICATION: FABRICATE DUCTS, ELBOWS, TRANSITIONS, OFFSETS, BRANCH CONNECTIONS, DUCT FABRICATION: FABRICATE DUCTS, ELBOWS, TRANSITIONS, OFFSETS, BRANCH CONNECTIONS, FABRICATION: FABRICATE DUCTS, ELBOWS, TRANSITIONS, OFFSETS, BRANCH CONNECTIONS, FABRICATION: FABRICATE DUCTS, ELBOWS, TRANSITIONS, OFFSETS, BRANCH CONNECTIONS, FABRICATE DUCTS, ELBOWS, TRANSITIONS, OFFSETS, BRANCH CONNECTIONS, FABRICATE DUCTS, ELBOWS, TRANSITIONS, OFFSETS, BRANCH CONNECTIONS, FABRICATE DUCTS, ELBOWS, TRANSITIONS, OFFSETS, BRANCH CONNECTIONS, DUCTS, ELBOWS, TRANSITIONS, OFFSETS, BRANCH CONNECTIONS, DUCTS, ELBOWS, TRANSITIONS, OFFSETS, BRANCH CONNECTIONS, ELBOWS, TRANSITIONS, OFFSETS, BRANCH CONNECTIONS, ELBOWS, TRANSITIONS, OFFSETS, BRANCH CONNECTIONS, TRANSITIONS, OFFSETS, BRANCH CONNECTIONS, TRANSITIONS, OFFSETS, BRANCH CONNECTIONS, OFFSETS, BRANCH CONNECTIONS, OFFSETS, BRANCH CONNECTIONS, BRANCH CONNECTIONS, BRANCH CONNECTIONS, CONNECTIONS, CONNECTIONS, AND OTHER CONSTRUCTION ACCORDING TO SMACNA'S "HVAC DUCT CONSTRUCTION STANDARDS--METAL AND OTHER CONSTRUCTION ACCORDING TO SMACNA'S "HVAC DUCT CONSTRUCTION STANDARDS--METAL AND OTHER CONSTRUCTION ACCORDING TO SMACNA'S "HVAC DUCT CONSTRUCTION STANDARDS--METAL AND CONSTRUCTION ACCORDING TO SMACNA'S "HVAC DUCT CONSTRUCTION STANDARDS--METAL AND CONSTRUCTION ACCORDING TO SMACNA'S "HVAC DUCT CONSTRUCTION STANDARDS--METAL AND ACCORDING TO SMACNA'S "HVAC DUCT CONSTRUCTION STANDARDS--METAL AND ACCORDING TO SMACNA'S "HVAC DUCT CONSTRUCTION STANDARDS--METAL AND TO SMACNA'S "HVAC DUCT CONSTRUCTION STANDARDS--METAL AND TO SMACNA'S "HVAC DUCT CONSTRUCTION STANDARDS--METAL AND SMACNA'S "HVAC DUCT CONSTRUCTION STANDARDS--METAL AND SMACNA'S "HVAC DUCT CONSTRUCTION STANDARDS--METAL AND "HVAC DUCT CONSTRUCTION STANDARDS--METAL AND "HVAC DUCT CONSTRUCTION STANDARDS--METAL AND DUCT CONSTRUCTION STANDARDS--METAL AND DUCT CONSTRUCTION STANDARDS--METAL AND CONSTRUCTION STANDARDS--METAL AND CONSTRUCTION STANDARDS--METAL AND STANDARDS--METAL AND STANDARDS--METAL AND AND AND FLEXIBLE" AND COMPLYING WITH REQUIREMENTS FOR METAL THICKNESS, REINFORCING TYPES AND INTERVALS, AND COMPLYING WITH REQUIREMENTS FOR METAL THICKNESS, REINFORCING TYPES AND INTERVALS, AND COMPLYING WITH REQUIREMENTS FOR METAL THICKNESS, REINFORCING TYPES AND INTERVALS, COMPLYING WITH REQUIREMENTS FOR METAL THICKNESS, REINFORCING TYPES AND INTERVALS, COMPLYING WITH REQUIREMENTS FOR METAL THICKNESS, REINFORCING TYPES AND INTERVALS, WITH REQUIREMENTS FOR METAL THICKNESS, REINFORCING TYPES AND INTERVALS, WITH REQUIREMENTS FOR METAL THICKNESS, REINFORCING TYPES AND INTERVALS, REQUIREMENTS FOR METAL THICKNESS, REINFORCING TYPES AND INTERVALS, REQUIREMENTS FOR METAL THICKNESS, REINFORCING TYPES AND INTERVALS, FOR METAL THICKNESS, REINFORCING TYPES AND INTERVALS, FOR METAL THICKNESS, REINFORCING TYPES AND INTERVALS, METAL THICKNESS, REINFORCING TYPES AND INTERVALS, METAL THICKNESS, REINFORCING TYPES AND INTERVALS, THICKNESS, REINFORCING TYPES AND INTERVALS, THICKNESS, REINFORCING TYPES AND INTERVALS, REINFORCING TYPES AND INTERVALS, REINFORCING TYPES AND INTERVALS, TYPES AND INTERVALS, TYPES AND INTERVALS, AND INTERVALS, AND INTERVALS, INTERVALS, INTERVALS, TIE-ROD APPLICATIONS, AND JOINT TYPES AND INTERVALS.

AutoCAD SHX Text

E.ROUND AND FLAT-OVAL DUCT AND FITTING FABRICATION:ROUND AND FLAT-OVAL DUCT AND FITTING FABRICATION:

AutoCAD SHX Text

1.DIAMETER AS APPLIED TO FLAT-OVAL DUCTS IN THIS ARTICLE IS THE DIAMETER OF A ROUND DUCT WITH A DIAMETER AS APPLIED TO FLAT-OVAL DUCTS IN THIS ARTICLE IS THE DIAMETER OF A ROUND DUCT WITH A AS APPLIED TO FLAT-OVAL DUCTS IN THIS ARTICLE IS THE DIAMETER OF A ROUND DUCT WITH A AS APPLIED TO FLAT-OVAL DUCTS IN THIS ARTICLE IS THE DIAMETER OF A ROUND DUCT WITH A APPLIED TO FLAT-OVAL DUCTS IN THIS ARTICLE IS THE DIAMETER OF A ROUND DUCT WITH A APPLIED TO FLAT-OVAL DUCTS IN THIS ARTICLE IS THE DIAMETER OF A ROUND DUCT WITH A TO FLAT-OVAL DUCTS IN THIS ARTICLE IS THE DIAMETER OF A ROUND DUCT WITH A TO FLAT-OVAL DUCTS IN THIS ARTICLE IS THE DIAMETER OF A ROUND DUCT WITH A FLAT-OVAL DUCTS IN THIS ARTICLE IS THE DIAMETER OF A ROUND DUCT WITH A FLAT-OVAL DUCTS IN THIS ARTICLE IS THE DIAMETER OF A ROUND DUCT WITH A DUCTS IN THIS ARTICLE IS THE DIAMETER OF A ROUND DUCT WITH A DUCTS IN THIS ARTICLE IS THE DIAMETER OF A ROUND DUCT WITH A IN THIS ARTICLE IS THE DIAMETER OF A ROUND DUCT WITH A IN THIS ARTICLE IS THE DIAMETER OF A ROUND DUCT WITH A THIS ARTICLE IS THE DIAMETER OF A ROUND DUCT WITH A THIS ARTICLE IS THE DIAMETER OF A ROUND DUCT WITH A ARTICLE IS THE DIAMETER OF A ROUND DUCT WITH A ARTICLE IS THE DIAMETER OF A ROUND DUCT WITH A IS THE DIAMETER OF A ROUND DUCT WITH A IS THE DIAMETER OF A ROUND DUCT WITH A THE DIAMETER OF A ROUND DUCT WITH A THE DIAMETER OF A ROUND DUCT WITH A DIAMETER OF A ROUND DUCT WITH A DIAMETER OF A ROUND DUCT WITH A OF A ROUND DUCT WITH A OF A ROUND DUCT WITH A A ROUND DUCT WITH A A ROUND DUCT WITH A ROUND DUCT WITH A ROUND DUCT WITH A DUCT WITH A DUCT WITH A WITH A WITH A A A CIRCUMFERENCE EQUAL TO THE PERIMETER OF A GIVEN SIZE OF FLAT-OVAL DUCT.

AutoCAD SHX Text

2.ROUND, SPIRAL LOCK-SEAM DUCTS: FABRICATE SUPPLY DUCTS OF GALVANIZED STEEL ACCORDING TO ROUND, SPIRAL LOCK-SEAM DUCTS: FABRICATE SUPPLY DUCTS OF GALVANIZED STEEL ACCORDING TO SPIRAL LOCK-SEAM DUCTS: FABRICATE SUPPLY DUCTS OF GALVANIZED STEEL ACCORDING TO SPIRAL LOCK-SEAM DUCTS: FABRICATE SUPPLY DUCTS OF GALVANIZED STEEL ACCORDING TO LOCK-SEAM DUCTS: FABRICATE SUPPLY DUCTS OF GALVANIZED STEEL ACCORDING TO LOCK-SEAM DUCTS: FABRICATE SUPPLY DUCTS OF GALVANIZED STEEL ACCORDING TO DUCTS: FABRICATE SUPPLY DUCTS OF GALVANIZED STEEL ACCORDING TO DUCTS: FABRICATE SUPPLY DUCTS OF GALVANIZED STEEL ACCORDING TO FABRICATE SUPPLY DUCTS OF GALVANIZED STEEL ACCORDING TO FABRICATE SUPPLY DUCTS OF GALVANIZED STEEL ACCORDING TO SUPPLY DUCTS OF GALVANIZED STEEL ACCORDING TO SUPPLY DUCTS OF GALVANIZED STEEL ACCORDING TO DUCTS OF GALVANIZED STEEL ACCORDING TO DUCTS OF GALVANIZED STEEL ACCORDING TO OF GALVANIZED STEEL ACCORDING TO OF GALVANIZED STEEL ACCORDING TO GALVANIZED STEEL ACCORDING TO GALVANIZED STEEL ACCORDING TO STEEL ACCORDING TO STEEL ACCORDING TO ACCORDING TO ACCORDING TO TO TO SMACNA'S "HVAC DUCT CONSTRUCTION STANDARDS--METAL AND FLEXIBLE."

AutoCAD SHX Text

3.FLAT-OVAL, SPIRAL LOCK-SEAM DUCTS: FABRICATE SUPPLY DUCTS ACCORDING TO SMACNA'S "HVAC DUCT FLAT-OVAL, SPIRAL LOCK-SEAM DUCTS: FABRICATE SUPPLY DUCTS ACCORDING TO SMACNA'S "HVAC DUCT SPIRAL LOCK-SEAM DUCTS: FABRICATE SUPPLY DUCTS ACCORDING TO SMACNA'S "HVAC DUCT SPIRAL LOCK-SEAM DUCTS: FABRICATE SUPPLY DUCTS ACCORDING TO SMACNA'S "HVAC DUCT LOCK-SEAM DUCTS: FABRICATE SUPPLY DUCTS ACCORDING TO SMACNA'S "HVAC DUCT LOCK-SEAM DUCTS: FABRICATE SUPPLY DUCTS ACCORDING TO SMACNA'S "HVAC DUCT DUCTS: FABRICATE SUPPLY DUCTS ACCORDING TO SMACNA'S "HVAC DUCT DUCTS: FABRICATE SUPPLY DUCTS ACCORDING TO SMACNA'S "HVAC DUCT FABRICATE SUPPLY DUCTS ACCORDING TO SMACNA'S "HVAC DUCT FABRICATE SUPPLY DUCTS ACCORDING TO SMACNA'S "HVAC DUCT SUPPLY DUCTS ACCORDING TO SMACNA'S "HVAC DUCT SUPPLY DUCTS ACCORDING TO SMACNA'S "HVAC DUCT DUCTS ACCORDING TO SMACNA'S "HVAC DUCT DUCTS ACCORDING TO SMACNA'S "HVAC DUCT ACCORDING TO SMACNA'S "HVAC DUCT ACCORDING TO SMACNA'S "HVAC DUCT TO SMACNA'S "HVAC DUCT TO SMACNA'S "HVAC DUCT SMACNA'S "HVAC DUCT SMACNA'S "HVAC DUCT "HVAC DUCT "HVAC DUCT DUCT DUCT CONSTRUCTION STANDARDS--METAL AND FLEXIBLE."

AutoCAD SHX Text

DUCT ACCESSORIES

AutoCAD SHX Text

A.QUALITY ASSURANCE: COMPLY WITH NFPA 90A, "INSTALLATION OF AIR CONDITIONING AND VENTILATING QUALITY ASSURANCE: COMPLY WITH NFPA 90A, "INSTALLATION OF AIR CONDITIONING AND VENTILATING ASSURANCE: COMPLY WITH NFPA 90A, "INSTALLATION OF AIR CONDITIONING AND VENTILATING ASSURANCE: COMPLY WITH NFPA 90A, "INSTALLATION OF AIR CONDITIONING AND VENTILATING COMPLY WITH NFPA 90A, "INSTALLATION OF AIR CONDITIONING AND VENTILATING COMPLY WITH NFPA 90A, "INSTALLATION OF AIR CONDITIONING AND VENTILATING COMPLY WITH NFPA 90A, "INSTALLATION OF AIR CONDITIONING AND VENTILATING WITH NFPA 90A, "INSTALLATION OF AIR CONDITIONING AND VENTILATING WITH NFPA 90A, "INSTALLATION OF AIR CONDITIONING AND VENTILATING NFPA 90A, "INSTALLATION OF AIR CONDITIONING AND VENTILATING NFPA 90A, "INSTALLATION OF AIR CONDITIONING AND VENTILATING 90A, "INSTALLATION OF AIR CONDITIONING AND VENTILATING 90A, "INSTALLATION OF AIR CONDITIONING AND VENTILATING "INSTALLATION OF AIR CONDITIONING AND VENTILATING "INSTALLATION OF AIR CONDITIONING AND VENTILATING OF AIR CONDITIONING AND VENTILATING OF AIR CONDITIONING AND VENTILATING AIR CONDITIONING AND VENTILATING AIR CONDITIONING AND VENTILATING CONDITIONING AND VENTILATING CONDITIONING AND VENTILATING AND VENTILATING AND VENTILATING VENTILATING VENTILATING SYSTEMS," AND NFPA 90B, "INSTALLATION OF WARM AIR HEATING AND AIR CONDITIONING SYSTEMS."

AutoCAD SHX Text

B.MANUAL VOLUME DAMPERS (LOW PRESSURE):MANUAL VOLUME DAMPERS (LOW PRESSURE):

AutoCAD SHX Text

1.FACTORY FABRICATED, WITH REQUIRED HARDWARE AND ACCESSORIES. STIFFEN DAMPER BLADES FOR FACTORY FABRICATED, WITH REQUIRED HARDWARE AND ACCESSORIES. STIFFEN DAMPER BLADES FOR FABRICATED, WITH REQUIRED HARDWARE AND ACCESSORIES. STIFFEN DAMPER BLADES FOR FABRICATED, WITH REQUIRED HARDWARE AND ACCESSORIES. STIFFEN DAMPER BLADES FOR WITH REQUIRED HARDWARE AND ACCESSORIES. STIFFEN DAMPER BLADES FOR WITH REQUIRED HARDWARE AND ACCESSORIES. STIFFEN DAMPER BLADES FOR REQUIRED HARDWARE AND ACCESSORIES. STIFFEN DAMPER BLADES FOR REQUIRED HARDWARE AND ACCESSORIES. STIFFEN DAMPER BLADES FOR HARDWARE AND ACCESSORIES. STIFFEN DAMPER BLADES FOR HARDWARE AND ACCESSORIES. STIFFEN DAMPER BLADES FOR AND ACCESSORIES. STIFFEN DAMPER BLADES FOR AND ACCESSORIES. STIFFEN DAMPER BLADES FOR ACCESSORIES. STIFFEN DAMPER BLADES FOR ACCESSORIES. STIFFEN DAMPER BLADES FOR STIFFEN DAMPER BLADES FOR STIFFEN DAMPER BLADES FOR DAMPER BLADES FOR DAMPER BLADES FOR BLADES FOR BLADES FOR FOR FOR STABILITY. INCLUDE LOCKING DEVICE TO HOLD SINGLE-BLADE DAMPERS IN A FIXED POSITION WITHOUT INCLUDE LOCKING DEVICE TO HOLD SINGLE-BLADE DAMPERS IN A FIXED POSITION WITHOUT INCLUDE LOCKING DEVICE TO HOLD SINGLE-BLADE DAMPERS IN A FIXED POSITION WITHOUT LOCKING DEVICE TO HOLD SINGLE-BLADE DAMPERS IN A FIXED POSITION WITHOUT LOCKING DEVICE TO HOLD SINGLE-BLADE DAMPERS IN A FIXED POSITION WITHOUT DEVICE TO HOLD SINGLE-BLADE DAMPERS IN A FIXED POSITION WITHOUT DEVICE TO HOLD SINGLE-BLADE DAMPERS IN A FIXED POSITION WITHOUT TO HOLD SINGLE-BLADE DAMPERS IN A FIXED POSITION WITHOUT TO HOLD SINGLE-BLADE DAMPERS IN A FIXED POSITION WITHOUT HOLD SINGLE-BLADE DAMPERS IN A FIXED POSITION WITHOUT HOLD SINGLE-BLADE DAMPERS IN A FIXED POSITION WITHOUT SINGLE-BLADE DAMPERS IN A FIXED POSITION WITHOUT SINGLE-BLADE DAMPERS IN A FIXED POSITION WITHOUT DAMPERS IN A FIXED POSITION WITHOUT DAMPERS IN A FIXED POSITION WITHOUT IN A FIXED POSITION WITHOUT IN A FIXED POSITION WITHOUT A FIXED POSITION WITHOUT A FIXED POSITION WITHOUT FIXED POSITION WITHOUT FIXED POSITION WITHOUT POSITION WITHOUT POSITION WITHOUT WITHOUT WITHOUT VIBRATION. CLOSE DUCT PENETRATIONS FOR DAMPER COMPONENTS TO SEAL DUCT CONSISTENT WITH CLOSE DUCT PENETRATIONS FOR DAMPER COMPONENTS TO SEAL DUCT CONSISTENT WITH CLOSE DUCT PENETRATIONS FOR DAMPER COMPONENTS TO SEAL DUCT CONSISTENT WITH DUCT PENETRATIONS FOR DAMPER COMPONENTS TO SEAL DUCT CONSISTENT WITH DUCT PENETRATIONS FOR DAMPER COMPONENTS TO SEAL DUCT CONSISTENT WITH PENETRATIONS FOR DAMPER COMPONENTS TO SEAL DUCT CONSISTENT WITH PENETRATIONS FOR DAMPER COMPONENTS TO SEAL DUCT CONSISTENT WITH FOR DAMPER COMPONENTS TO SEAL DUCT CONSISTENT WITH FOR DAMPER COMPONENTS TO SEAL DUCT CONSISTENT WITH DAMPER COMPONENTS TO SEAL DUCT CONSISTENT WITH DAMPER COMPONENTS TO SEAL DUCT CONSISTENT WITH COMPONENTS TO SEAL DUCT CONSISTENT WITH COMPONENTS TO SEAL DUCT CONSISTENT WITH TO SEAL DUCT CONSISTENT WITH TO SEAL DUCT CONSISTENT WITH SEAL DUCT CONSISTENT WITH SEAL DUCT CONSISTENT WITH DUCT CONSISTENT WITH DUCT CONSISTENT WITH CONSISTENT WITH CONSISTENT WITH WITH WITH PRESSURE CLASS.

AutoCAD SHX Text

2.DAMPER HARDWARE: ZINC-PLATED, DIE-CAST CORE WITH DIAL AND HANDLE MADE OF 3/32-INCH- THICK DAMPER HARDWARE: ZINC-PLATED, DIE-CAST CORE WITH DIAL AND HANDLE MADE OF 3/32-INCH- THICK HARDWARE: ZINC-PLATED, DIE-CAST CORE WITH DIAL AND HANDLE MADE OF 3/32-INCH- THICK HARDWARE: ZINC-PLATED, DIE-CAST CORE WITH DIAL AND HANDLE MADE OF 3/32-INCH- THICK ZINC-PLATED, DIE-CAST CORE WITH DIAL AND HANDLE MADE OF 3/32-INCH- THICK ZINC-PLATED, DIE-CAST CORE WITH DIAL AND HANDLE MADE OF 3/32-INCH- THICK DIE-CAST CORE WITH DIAL AND HANDLE MADE OF 3/32-INCH- THICK DIE-CAST CORE WITH DIAL AND HANDLE MADE OF 3/32-INCH- THICK CORE WITH DIAL AND HANDLE MADE OF 3/32-INCH- THICK CORE WITH DIAL AND HANDLE MADE OF 3/32-INCH- THICK WITH DIAL AND HANDLE MADE OF 3/32-INCH- THICK WITH DIAL AND HANDLE MADE OF 3/32-INCH- THICK DIAL AND HANDLE MADE OF 3/32-INCH- THICK DIAL AND HANDLE MADE OF 3/32-INCH- THICK AND HANDLE MADE OF 3/32-INCH- THICK AND HANDLE MADE OF 3/32-INCH- THICK HANDLE MADE OF 3/32-INCH- THICK HANDLE MADE OF 3/32-INCH- THICK MADE OF 3/32-INCH- THICK MADE OF 3/32-INCH- THICK OF 3/32-INCH- THICK OF 3/32-INCH- THICK 3/32-INCH- THICK 3/32-INCH- THICK THICK THICK ZINC-PLATED STEEL, AND A 3/4-INCH HEXAGON LOCKING NUT. INCLUDE CENTER HOLE TO SUIT DAMPER STEEL, AND A 3/4-INCH HEXAGON LOCKING NUT. INCLUDE CENTER HOLE TO SUIT DAMPER STEEL, AND A 3/4-INCH HEXAGON LOCKING NUT. INCLUDE CENTER HOLE TO SUIT DAMPER AND A 3/4-INCH HEXAGON LOCKING NUT. INCLUDE CENTER HOLE TO SUIT DAMPER AND A 3/4-INCH HEXAGON LOCKING NUT. INCLUDE CENTER HOLE TO SUIT DAMPER A 3/4-INCH HEXAGON LOCKING NUT. INCLUDE CENTER HOLE TO SUIT DAMPER A 3/4-INCH HEXAGON LOCKING NUT. INCLUDE CENTER HOLE TO SUIT DAMPER 3/4-INCH HEXAGON LOCKING NUT. INCLUDE CENTER HOLE TO SUIT DAMPER 3/4-INCH HEXAGON LOCKING NUT. INCLUDE CENTER HOLE TO SUIT DAMPER HEXAGON LOCKING NUT. INCLUDE CENTER HOLE TO SUIT DAMPER HEXAGON LOCKING NUT. INCLUDE CENTER HOLE TO SUIT DAMPER LOCKING NUT. INCLUDE CENTER HOLE TO SUIT DAMPER LOCKING NUT. INCLUDE CENTER HOLE TO SUIT DAMPER NUT. INCLUDE CENTER HOLE TO SUIT DAMPER NUT. INCLUDE CENTER HOLE TO SUIT DAMPER INCLUDE CENTER HOLE TO SUIT DAMPER INCLUDE CENTER HOLE TO SUIT DAMPER CENTER HOLE TO SUIT DAMPER CENTER HOLE TO SUIT DAMPER HOLE TO SUIT DAMPER HOLE TO SUIT DAMPER TO SUIT DAMPER TO SUIT DAMPER SUIT DAMPER SUIT DAMPER DAMPER DAMPER OPERATING-ROD SIZE. INCLUDE ELEVATED PLATFORM FOR INSULATED DUCT MOUNTING.

AutoCAD SHX Text

3.MANUFACTURERS: AMERICAN WARMING AND VENTILATING | ARROW UNITED INDUSTRIES | GREENHECK | MANUFACTURERS: AMERICAN WARMING AND VENTILATING | ARROW UNITED INDUSTRIES | GREENHECK | AMERICAN WARMING AND VENTILATING | ARROW UNITED INDUSTRIES | GREENHECK | AMERICAN WARMING AND VENTILATING | ARROW UNITED INDUSTRIES | GREENHECK | AMERICAN WARMING AND VENTILATING | ARROW UNITED INDUSTRIES | GREENHECK | WARMING AND VENTILATING | ARROW UNITED INDUSTRIES | GREENHECK | WARMING AND VENTILATING | ARROW UNITED INDUSTRIES | GREENHECK | AND VENTILATING | ARROW UNITED INDUSTRIES | GREENHECK | AND VENTILATING | ARROW UNITED INDUSTRIES | GREENHECK | VENTILATING | ARROW UNITED INDUSTRIES | GREENHECK | VENTILATING | ARROW UNITED INDUSTRIES | GREENHECK | | ARROW UNITED INDUSTRIES | GREENHECK | | ARROW UNITED INDUSTRIES | GREENHECK | ARROW UNITED INDUSTRIES | GREENHECK | ARROW UNITED INDUSTRIES | GREENHECK | UNITED INDUSTRIES | GREENHECK | UNITED INDUSTRIES | GREENHECK | INDUSTRIES | GREENHECK | INDUSTRIES | GREENHECK | | GREENHECK | | GREENHECK | GREENHECK | GREENHECK | | | KRUEGER | LOUVERS AND DAMPERS | NAILOR INDUSTRIES INC. | RUSKIN COMPANY | VENT PRODUCTS | LOUVERS AND DAMPERS | NAILOR INDUSTRIES INC. | RUSKIN COMPANY | VENT PRODUCTS | LOUVERS AND DAMPERS | NAILOR INDUSTRIES INC. | RUSKIN COMPANY | VENT PRODUCTS LOUVERS AND DAMPERS | NAILOR INDUSTRIES INC. | RUSKIN COMPANY | VENT PRODUCTS LOUVERS AND DAMPERS | NAILOR INDUSTRIES INC. | RUSKIN COMPANY | VENT PRODUCTS AND DAMPERS | NAILOR INDUSTRIES INC. | RUSKIN COMPANY | VENT PRODUCTS AND DAMPERS | NAILOR INDUSTRIES INC. | RUSKIN COMPANY | VENT PRODUCTS DAMPERS | NAILOR INDUSTRIES INC. | RUSKIN COMPANY | VENT PRODUCTS DAMPERS | NAILOR INDUSTRIES INC. | RUSKIN COMPANY | VENT PRODUCTS | NAILOR INDUSTRIES INC. | RUSKIN COMPANY | VENT PRODUCTS | NAILOR INDUSTRIES INC. | RUSKIN COMPANY | VENT PRODUCTS NAILOR INDUSTRIES INC. | RUSKIN COMPANY | VENT PRODUCTS NAILOR INDUSTRIES INC. | RUSKIN COMPANY | VENT PRODUCTS INDUSTRIES INC. | RUSKIN COMPANY | VENT PRODUCTS INDUSTRIES INC. | RUSKIN COMPANY | VENT PRODUCTS INC. | RUSKIN COMPANY | VENT PRODUCTS INC. | RUSKIN COMPANY | VENT PRODUCTS | RUSKIN COMPANY | VENT PRODUCTS | RUSKIN COMPANY | VENT PRODUCTS RUSKIN COMPANY | VENT PRODUCTS RUSKIN COMPANY | VENT PRODUCTS COMPANY | VENT PRODUCTS COMPANY | VENT PRODUCTS | VENT PRODUCTS | VENT PRODUCTS VENT PRODUCTS VENT PRODUCTS PRODUCTS PRODUCTS COMPANY, INC. | YOUNG REGULATOR COMPANY.

AutoCAD SHX Text

C.TURNING VANES:TURNING VANES:

AutoCAD SHX Text

1.FABRICATE TO COMPLY WITH SMACNA'S "HVAC DUCT CONSTRUCTION STANDARDS--METAL AND FLEXIBLE" FABRICATE TO COMPLY WITH SMACNA'S "HVAC DUCT CONSTRUCTION STANDARDS--METAL AND FLEXIBLE" TO COMPLY WITH SMACNA'S "HVAC DUCT CONSTRUCTION STANDARDS--METAL AND FLEXIBLE" TO COMPLY WITH SMACNA'S "HVAC DUCT CONSTRUCTION STANDARDS--METAL AND FLEXIBLE" COMPLY WITH SMACNA'S "HVAC DUCT CONSTRUCTION STANDARDS--METAL AND FLEXIBLE" COMPLY WITH SMACNA'S "HVAC DUCT CONSTRUCTION STANDARDS--METAL AND FLEXIBLE" WITH SMACNA'S "HVAC DUCT CONSTRUCTION STANDARDS--METAL AND FLEXIBLE" WITH SMACNA'S "HVAC DUCT CONSTRUCTION STANDARDS--METAL AND FLEXIBLE" SMACNA'S "HVAC DUCT CONSTRUCTION STANDARDS--METAL AND FLEXIBLE" SMACNA'S "HVAC DUCT CONSTRUCTION STANDARDS--METAL AND FLEXIBLE" "HVAC DUCT CONSTRUCTION STANDARDS--METAL AND FLEXIBLE" "HVAC DUCT CONSTRUCTION STANDARDS--METAL AND FLEXIBLE" DUCT CONSTRUCTION STANDARDS--METAL AND FLEXIBLE" DUCT CONSTRUCTION STANDARDS--METAL AND FLEXIBLE" CONSTRUCTION STANDARDS--METAL AND FLEXIBLE" CONSTRUCTION STANDARDS--METAL AND FLEXIBLE" STANDARDS--METAL AND FLEXIBLE" STANDARDS--METAL AND FLEXIBLE" AND FLEXIBLE" AND FLEXIBLE" FLEXIBLE" FLEXIBLE" FOR VANES AND VANE RUNNERS. VANE RUNNERS SHALL AUTOMATICALLY ALIGN VANES.

AutoCAD SHX Text

2.MANUFACTURED TURNING VANES: DOUBLE-VANE OR AIRFOIL-SHAPED, CURVED BLADES OF GALVANIZED MANUFACTURED TURNING VANES: DOUBLE-VANE OR AIRFOIL-SHAPED, CURVED BLADES OF GALVANIZED TURNING VANES: DOUBLE-VANE OR AIRFOIL-SHAPED, CURVED BLADES OF GALVANIZED TURNING VANES: DOUBLE-VANE OR AIRFOIL-SHAPED, CURVED BLADES OF GALVANIZED VANES: DOUBLE-VANE OR AIRFOIL-SHAPED, CURVED BLADES OF GALVANIZED VANES: DOUBLE-VANE OR AIRFOIL-SHAPED, CURVED BLADES OF GALVANIZED DOUBLE-VANE OR AIRFOIL-SHAPED, CURVED BLADES OF GALVANIZED DOUBLE-VANE OR AIRFOIL-SHAPED, CURVED BLADES OF GALVANIZED OR AIRFOIL-SHAPED, CURVED BLADES OF GALVANIZED OR AIRFOIL-SHAPED, CURVED BLADES OF GALVANIZED AIRFOIL-SHAPED, CURVED BLADES OF GALVANIZED AIRFOIL-SHAPED, CURVED BLADES OF GALVANIZED CURVED BLADES OF GALVANIZED CURVED BLADES OF GALVANIZED BLADES OF GALVANIZED BLADES OF GALVANIZED OF GALVANIZED OF GALVANIZED GALVANIZED GALVANIZED SHEET STEEL SET INTO VANE RUNNERS SUITABLE FOR DUCT MOUNTING.

AutoCAD SHX Text

a.MANUFACTURERS: AERO/DYNE COMPANY | DUCTMATE INDUSTRIES, INC. | DURO DYNE CORP. | WARD MANUFACTURERS: AERO/DYNE COMPANY | DUCTMATE INDUSTRIES, INC. | DURO DYNE CORP. | WARD AERO/DYNE COMPANY | DUCTMATE INDUSTRIES, INC. | DURO DYNE CORP. | WARD AERO/DYNE COMPANY | DUCTMATE INDUSTRIES, INC. | DURO DYNE CORP. | WARD AERO/DYNE COMPANY | DUCTMATE INDUSTRIES, INC. | DURO DYNE CORP. | WARD COMPANY | DUCTMATE INDUSTRIES, INC. | DURO DYNE CORP. | WARD COMPANY | DUCTMATE INDUSTRIES, INC. | DURO DYNE CORP. | WARD | DUCTMATE INDUSTRIES, INC. | DURO DYNE CORP. | WARD | DUCTMATE INDUSTRIES, INC. | DURO DYNE CORP. | WARD DUCTMATE INDUSTRIES, INC. | DURO DYNE CORP. | WARD DUCTMATE INDUSTRIES, INC. | DURO DYNE CORP. | WARD INDUSTRIES, INC. | DURO DYNE CORP. | WARD INDUSTRIES, INC. | DURO DYNE CORP. | WARD INC. | DURO DYNE CORP. | WARD INC. | DURO DYNE CORP. | WARD | DURO DYNE CORP. | WARD | DURO DYNE CORP. | WARD DURO DYNE CORP. | WARD DURO DYNE CORP. | WARD DYNE CORP. | WARD DYNE CORP. | WARD CORP. | WARD CORP. | WARD | WARD | WARD WARD WARD INDUSTRIES, INC.

AutoCAD SHX Text

3.ACOUSTIC TURNING VANES: DOUBLE-VANE CURVED BLADES OF GALVANIZED SHEET STEEL WITH PERFORATED ACOUSTIC TURNING VANES: DOUBLE-VANE CURVED BLADES OF GALVANIZED SHEET STEEL WITH PERFORATED TURNING VANES: DOUBLE-VANE CURVED BLADES OF GALVANIZED SHEET STEEL WITH PERFORATED TURNING VANES: DOUBLE-VANE CURVED BLADES OF GALVANIZED SHEET STEEL WITH PERFORATED VANES: DOUBLE-VANE CURVED BLADES OF GALVANIZED SHEET STEEL WITH PERFORATED VANES: DOUBLE-VANE CURVED BLADES OF GALVANIZED SHEET STEEL WITH PERFORATED DOUBLE-VANE CURVED BLADES OF GALVANIZED SHEET STEEL WITH PERFORATED DOUBLE-VANE CURVED BLADES OF GALVANIZED SHEET STEEL WITH PERFORATED CURVED BLADES OF GALVANIZED SHEET STEEL WITH PERFORATED CURVED BLADES OF GALVANIZED SHEET STEEL WITH PERFORATED BLADES OF GALVANIZED SHEET STEEL WITH PERFORATED BLADES OF GALVANIZED SHEET STEEL WITH PERFORATED OF GALVANIZED SHEET STEEL WITH PERFORATED OF GALVANIZED SHEET STEEL WITH PERFORATED GALVANIZED SHEET STEEL WITH PERFORATED GALVANIZED SHEET STEEL WITH PERFORATED SHEET STEEL WITH PERFORATED SHEET STEEL WITH PERFORATED STEEL WITH PERFORATED STEEL WITH PERFORATED WITH PERFORATED WITH PERFORATED PERFORATED PERFORATED FACES AND FIBROUS-GLASS FILL SET INTO VANE RUNNERS SUITABLE FOR DUCT MOUNTING.

AutoCAD SHX Text

a.MANUFACTURERS: DUCTMATE INDUSTRIES, INC. | WARD INDUSTRIES, INC.MANUFACTURERS: DUCTMATE INDUSTRIES, INC. | WARD INDUSTRIES, INC.

AutoCAD SHX Text

D.FLEXIBLE CONNECTORS:FLEXIBLE CONNECTORS:

AutoCAD SHX Text

1.FLAME-RETARDANT OR NONCOMBUSTIBLE FABRICS, COATINGS, AND ADHESIVES COMPLYING WITH UL 181, FLAME-RETARDANT OR NONCOMBUSTIBLE FABRICS, COATINGS, AND ADHESIVES COMPLYING WITH UL 181, OR NONCOMBUSTIBLE FABRICS, COATINGS, AND ADHESIVES COMPLYING WITH UL 181, OR NONCOMBUSTIBLE FABRICS, COATINGS, AND ADHESIVES COMPLYING WITH UL 181, NONCOMBUSTIBLE FABRICS, COATINGS, AND ADHESIVES COMPLYING WITH UL 181, NONCOMBUSTIBLE FABRICS, COATINGS, AND ADHESIVES COMPLYING WITH UL 181, FABRICS, COATINGS, AND ADHESIVES COMPLYING WITH UL 181, FABRICS, COATINGS, AND ADHESIVES COMPLYING WITH UL 181, COATINGS, AND ADHESIVES COMPLYING WITH UL 181, COATINGS, AND ADHESIVES COMPLYING WITH UL 181, AND ADHESIVES COMPLYING WITH UL 181, AND ADHESIVES COMPLYING WITH UL 181, ADHESIVES COMPLYING WITH UL 181, ADHESIVES COMPLYING WITH UL 181, COMPLYING WITH UL 181, COMPLYING WITH UL 181, WITH UL 181, WITH UL 181, UL 181, UL 181, 181, 181, CLASS 1.

AutoCAD SHX Text

2.METAL-EDGED CONNECTORS: FACTORY FABRICATED WITH A FABRIC STRIP ATTACHED TO TWO STRIPS OF METAL-EDGED CONNECTORS: FACTORY FABRICATED WITH A FABRIC STRIP ATTACHED TO TWO STRIPS OF CONNECTORS: FACTORY FABRICATED WITH A FABRIC STRIP ATTACHED TO TWO STRIPS OF CONNECTORS: FACTORY FABRICATED WITH A FABRIC STRIP ATTACHED TO TWO STRIPS OF FACTORY FABRICATED WITH A FABRIC STRIP ATTACHED TO TWO STRIPS OF FACTORY FABRICATED WITH A FABRIC STRIP ATTACHED TO TWO STRIPS OF FABRICATED WITH A FABRIC STRIP ATTACHED TO TWO STRIPS OF FABRICATED WITH A FABRIC STRIP ATTACHED TO TWO STRIPS OF WITH A FABRIC STRIP ATTACHED TO TWO STRIPS OF WITH A FABRIC STRIP ATTACHED TO TWO STRIPS OF A FABRIC STRIP ATTACHED TO TWO STRIPS OF A FABRIC STRIP ATTACHED TO TWO STRIPS OF FABRIC STRIP ATTACHED TO TWO STRIPS OF FABRIC STRIP ATTACHED TO TWO STRIPS OF STRIP ATTACHED TO TWO STRIPS OF STRIP ATTACHED TO TWO STRIPS OF ATTACHED TO TWO STRIPS OF ATTACHED TO TWO STRIPS OF TO TWO STRIPS OF TO TWO STRIPS OF TWO STRIPS OF TWO STRIPS OF STRIPS OF STRIPS OF OF OF GALVANIZED SHEET STEEL, STAINLESS STEEL OR ALUMINUM SHEETS. SELECT METAL COMPATIBLE WITH SHEET STEEL, STAINLESS STEEL OR ALUMINUM SHEETS. SELECT METAL COMPATIBLE WITH SHEET STEEL, STAINLESS STEEL OR ALUMINUM SHEETS. SELECT METAL COMPATIBLE WITH STEEL, STAINLESS STEEL OR ALUMINUM SHEETS. SELECT METAL COMPATIBLE WITH STEEL, STAINLESS STEEL OR ALUMINUM SHEETS. SELECT METAL COMPATIBLE WITH STAINLESS STEEL OR ALUMINUM SHEETS. SELECT METAL COMPATIBLE WITH STAINLESS STEEL OR ALUMINUM SHEETS. SELECT METAL COMPATIBLE WITH STEEL OR ALUMINUM SHEETS. SELECT METAL COMPATIBLE WITH STEEL OR ALUMINUM SHEETS. SELECT METAL COMPATIBLE WITH OR ALUMINUM SHEETS. SELECT METAL COMPATIBLE WITH OR ALUMINUM SHEETS. SELECT METAL COMPATIBLE WITH ALUMINUM SHEETS. SELECT METAL COMPATIBLE WITH ALUMINUM SHEETS. SELECT METAL COMPATIBLE WITH SHEETS. SELECT METAL COMPATIBLE WITH SHEETS. SELECT METAL COMPATIBLE WITH SELECT METAL COMPATIBLE WITH SELECT METAL COMPATIBLE WITH METAL COMPATIBLE WITH METAL COMPATIBLE WITH COMPATIBLE WITH COMPATIBLE WITH WITH WITH DUCTS.

AutoCAD SHX Text

3.INDOOR SYSTEM, FLEXIBLE CONNECTOR FABRIC: GLASS FABRIC DOUBLE COATED WITH NEOPRENE.INDOOR SYSTEM, FLEXIBLE CONNECTOR FABRIC: GLASS FABRIC DOUBLE COATED WITH NEOPRENE.

AutoCAD SHX Text

4.OUTDOOR SYSTEM, FLEXIBLE CONNECTOR FABRIC: GLASS FABRIC DOUBLE COATED WITH WEATHERPROOF, OUTDOOR SYSTEM, FLEXIBLE CONNECTOR FABRIC: GLASS FABRIC DOUBLE COATED WITH WEATHERPROOF, SYSTEM, FLEXIBLE CONNECTOR FABRIC: GLASS FABRIC DOUBLE COATED WITH WEATHERPROOF, SYSTEM, FLEXIBLE CONNECTOR FABRIC: GLASS FABRIC DOUBLE COATED WITH WEATHERPROOF, FLEXIBLE CONNECTOR FABRIC: GLASS FABRIC DOUBLE COATED WITH WEATHERPROOF, FLEXIBLE CONNECTOR FABRIC: GLASS FABRIC DOUBLE COATED WITH WEATHERPROOF, CONNECTOR FABRIC: GLASS FABRIC DOUBLE COATED WITH WEATHERPROOF, CONNECTOR FABRIC: GLASS FABRIC DOUBLE COATED WITH WEATHERPROOF, FABRIC: GLASS FABRIC DOUBLE COATED WITH WEATHERPROOF, FABRIC: GLASS FABRIC DOUBLE COATED WITH WEATHERPROOF, GLASS FABRIC DOUBLE COATED WITH WEATHERPROOF, GLASS FABRIC DOUBLE COATED WITH WEATHERPROOF, FABRIC DOUBLE COATED WITH WEATHERPROOF, FABRIC DOUBLE COATED WITH WEATHERPROOF, DOUBLE COATED WITH WEATHERPROOF, DOUBLE COATED WITH WEATHERPROOF, COATED WITH WEATHERPROOF, COATED WITH WEATHERPROOF, WITH WEATHERPROOF, WITH WEATHERPROOF, WEATHERPROOF, WEATHERPROOF, SYNTHETIC RUBBER RESISTANT TO UV RAYS AND OZONE.

AutoCAD SHX Text

5.HIGH-TEMPERATURE SYSTEM, FLEXIBLE CONNECTORS: GLASS FABRIC COATED WITH SILICONE RUBBER.HIGH-TEMPERATURE SYSTEM, FLEXIBLE CONNECTORS: GLASS FABRIC COATED WITH SILICONE RUBBER.

AutoCAD SHX Text

6.HIGH-CORROSIVE-ENVIRONMENT SYSTEM, FLEXIBLE CONNECTORS: GLASS FABRIC WITH CHEMICAL-RESISTANT HIGH-CORROSIVE-ENVIRONMENT SYSTEM, FLEXIBLE CONNECTORS: GLASS FABRIC WITH CHEMICAL-RESISTANT SYSTEM, FLEXIBLE CONNECTORS: GLASS FABRIC WITH CHEMICAL-RESISTANT SYSTEM, FLEXIBLE CONNECTORS: GLASS FABRIC WITH CHEMICAL-RESISTANT FLEXIBLE CONNECTORS: GLASS FABRIC WITH CHEMICAL-RESISTANT FLEXIBLE CONNECTORS: GLASS FABRIC WITH CHEMICAL-RESISTANT CONNECTORS: GLASS FABRIC WITH CHEMICAL-RESISTANT CONNECTORS: GLASS FABRIC WITH CHEMICAL-RESISTANT GLASS FABRIC WITH CHEMICAL-RESISTANT GLASS FABRIC WITH CHEMICAL-RESISTANT FABRIC WITH CHEMICAL-RESISTANT FABRIC WITH CHEMICAL-RESISTANT WITH CHEMICAL-RESISTANT WITH CHEMICAL-RESISTANT CHEMICAL-RESISTANT CHEMICAL-RESISTANT COATING.

AutoCAD SHX Text

7.MANUFACTURERS: ADSCO MANUFACTURING LLC. | DURO DYNE CORP. | SENIOR FLEXONICS PATHWAY. | MANUFACTURERS: ADSCO MANUFACTURING LLC. | DURO DYNE CORP. | SENIOR FLEXONICS PATHWAY. | ADSCO MANUFACTURING LLC. | DURO DYNE CORP. | SENIOR FLEXONICS PATHWAY. | ADSCO MANUFACTURING LLC. | DURO DYNE CORP. | SENIOR FLEXONICS PATHWAY. | ADSCO MANUFACTURING LLC. | DURO DYNE CORP. | SENIOR FLEXONICS PATHWAY. | MANUFACTURING LLC. | DURO DYNE CORP. | SENIOR FLEXONICS PATHWAY. | MANUFACTURING LLC. | DURO DYNE CORP. | SENIOR FLEXONICS PATHWAY. | LLC. | DURO DYNE CORP. | SENIOR FLEXONICS PATHWAY. | LLC. | DURO DYNE CORP. | SENIOR FLEXONICS PATHWAY. | | DURO DYNE CORP. | SENIOR FLEXONICS PATHWAY. | | DURO DYNE CORP. | SENIOR FLEXONICS PATHWAY. | DURO DYNE CORP. | SENIOR FLEXONICS PATHWAY. | DURO DYNE CORP. | SENIOR FLEXONICS PATHWAY. | DYNE CORP. | SENIOR FLEXONICS PATHWAY. | DYNE CORP. | SENIOR FLEXONICS PATHWAY. | CORP. | SENIOR FLEXONICS PATHWAY. | CORP. | SENIOR FLEXONICS PATHWAY. | | SENIOR FLEXONICS PATHWAY. | | SENIOR FLEXONICS PATHWAY. | SENIOR FLEXONICS PATHWAY. | SENIOR FLEXONICS PATHWAY. | FLEXONICS PATHWAY. | FLEXONICS PATHWAY. | PATHWAY. | PATHWAY. | | | VENTFABRICS, INC.

AutoCAD SHX Text

E.FLEXIBLE DUCTS, LOW AND MEDIUM PRESSURE:FLEXIBLE DUCTS, LOW AND MEDIUM PRESSURE:

AutoCAD SHX Text

1.FLEXIBLE DUCTS: INTERLOCKING SPIRAL OF GALVANIZED STEEL OR ALUMINUM CONSTRUCTION OR FABRIC FLEXIBLE DUCTS: INTERLOCKING SPIRAL OF GALVANIZED STEEL OR ALUMINUM CONSTRUCTION OR FABRIC DUCTS: INTERLOCKING SPIRAL OF GALVANIZED STEEL OR ALUMINUM CONSTRUCTION OR FABRIC DUCTS: INTERLOCKING SPIRAL OF GALVANIZED STEEL OR ALUMINUM CONSTRUCTION OR FABRIC INTERLOCKING SPIRAL OF GALVANIZED STEEL OR ALUMINUM CONSTRUCTION OR FABRIC INTERLOCKING SPIRAL OF GALVANIZED STEEL OR ALUMINUM CONSTRUCTION OR FABRIC SPIRAL OF GALVANIZED STEEL OR ALUMINUM CONSTRUCTION OR FABRIC SPIRAL OF GALVANIZED STEEL OR ALUMINUM CONSTRUCTION OR FABRIC OF GALVANIZED STEEL OR ALUMINUM CONSTRUCTION OR FABRIC OF GALVANIZED STEEL OR ALUMINUM CONSTRUCTION OR FABRIC GALVANIZED STEEL OR ALUMINUM CONSTRUCTION OR FABRIC GALVANIZED STEEL OR ALUMINUM CONSTRUCTION OR FABRIC STEEL OR ALUMINUM CONSTRUCTION OR FABRIC STEEL OR ALUMINUM CONSTRUCTION OR FABRIC OR ALUMINUM CONSTRUCTION OR FABRIC OR ALUMINUM CONSTRUCTION OR FABRIC ALUMINUM CONSTRUCTION OR FABRIC ALUMINUM CONSTRUCTION OR FABRIC CONSTRUCTION OR FABRIC CONSTRUCTION OR FABRIC OR FABRIC OR FABRIC FABRIC FABRIC SUPPORTED BY HELICALLY WOUND SPRING STEEL WIRE OR FLAT STEEL BANDS; RATED TO 6 INCHES WG BY HELICALLY WOUND SPRING STEEL WIRE OR FLAT STEEL BANDS; RATED TO 6 INCHES WG BY HELICALLY WOUND SPRING STEEL WIRE OR FLAT STEEL BANDS; RATED TO 6 INCHES WG HELICALLY WOUND SPRING STEEL WIRE OR FLAT STEEL BANDS; RATED TO 6 INCHES WG HELICALLY WOUND SPRING STEEL WIRE OR FLAT STEEL BANDS; RATED TO 6 INCHES WG WOUND SPRING STEEL WIRE OR FLAT STEEL BANDS; RATED TO 6 INCHES WG WOUND SPRING STEEL WIRE OR FLAT STEEL BANDS; RATED TO 6 INCHES WG SPRING STEEL WIRE OR FLAT STEEL BANDS; RATED TO 6 INCHES WG SPRING STEEL WIRE OR FLAT STEEL BANDS; RATED TO 6 INCHES WG STEEL WIRE OR FLAT STEEL BANDS; RATED TO 6 INCHES WG STEEL WIRE OR FLAT STEEL BANDS; RATED TO 6 INCHES WG WIRE OR FLAT STEEL BANDS; RATED TO 6 INCHES WG WIRE OR FLAT STEEL BANDS; RATED TO 6 INCHES WG OR FLAT STEEL BANDS; RATED TO 6 INCHES WG OR FLAT STEEL BANDS; RATED TO 6 INCHES WG FLAT STEEL BANDS; RATED TO 6 INCHES WG FLAT STEEL BANDS; RATED TO 6 INCHES WG STEEL BANDS; RATED TO 6 INCHES WG STEEL BANDS; RATED TO 6 INCHES WG BANDS; RATED TO 6 INCHES WG BANDS; RATED TO 6 INCHES WG RATED TO 6 INCHES WG RATED TO 6 INCHES WG TO 6 INCHES WG TO 6 INCHES WG 6 INCHES WG 6 INCHES WG INCHES WG INCHES WG WG WG POSITIVE AND 4 INCHES WG NEGATIVE FOR LOW AND MEDIUM PRESSURE DUCTS.

AutoCAD SHX Text

2.INSULATED FLEXIBLE DUCTS: FLEXIBLE DUCT WRAPPED WITH FLEXIBLE GLASS FIBER INSULATION, ENCLOSED INSULATED FLEXIBLE DUCTS: FLEXIBLE DUCT WRAPPED WITH FLEXIBLE GLASS FIBER INSULATION, ENCLOSED FLEXIBLE DUCTS: FLEXIBLE DUCT WRAPPED WITH FLEXIBLE GLASS FIBER INSULATION, ENCLOSED FLEXIBLE DUCTS: FLEXIBLE DUCT WRAPPED WITH FLEXIBLE GLASS FIBER INSULATION, ENCLOSED DUCTS: FLEXIBLE DUCT WRAPPED WITH FLEXIBLE GLASS FIBER INSULATION, ENCLOSED DUCTS: FLEXIBLE DUCT WRAPPED WITH FLEXIBLE GLASS FIBER INSULATION, ENCLOSED FLEXIBLE DUCT WRAPPED WITH FLEXIBLE GLASS FIBER INSULATION, ENCLOSED FLEXIBLE DUCT WRAPPED WITH FLEXIBLE GLASS FIBER INSULATION, ENCLOSED DUCT WRAPPED WITH FLEXIBLE GLASS FIBER INSULATION, ENCLOSED DUCT WRAPPED WITH FLEXIBLE GLASS FIBER INSULATION, ENCLOSED WRAPPED WITH FLEXIBLE GLASS FIBER INSULATION, ENCLOSED WRAPPED WITH FLEXIBLE GLASS FIBER INSULATION, ENCLOSED WITH FLEXIBLE GLASS FIBER INSULATION, ENCLOSED WITH FLEXIBLE GLASS FIBER INSULATION, ENCLOSED FLEXIBLE GLASS FIBER INSULATION, ENCLOSED FLEXIBLE GLASS FIBER INSULATION, ENCLOSED GLASS FIBER INSULATION, ENCLOSED GLASS FIBER INSULATION, ENCLOSED FIBER INSULATION, ENCLOSED FIBER INSULATION, ENCLOSED INSULATION, ENCLOSED INSULATION, ENCLOSED ENCLOSED ENCLOSED BY A FIRE RETARDANT POLYETHYLENE VAPOR BARRIER JACKET; MAXIMUM 0.23 K VALUE AT 75 DEG F.

AutoCAD SHX Text

3.ACOUSTICAL PERFORMANCE SHALL BE TESTED IN ACCORDANCE WITH THE AIR DIFFUSION COUNCIL'S ACOUSTICAL PERFORMANCE SHALL BE TESTED IN ACCORDANCE WITH THE AIR DIFFUSION COUNCIL'S PERFORMANCE SHALL BE TESTED IN ACCORDANCE WITH THE AIR DIFFUSION COUNCIL'S PERFORMANCE SHALL BE TESTED IN ACCORDANCE WITH THE AIR DIFFUSION COUNCIL'S SHALL BE TESTED IN ACCORDANCE WITH THE AIR DIFFUSION COUNCIL'S SHALL BE TESTED IN ACCORDANCE WITH THE AIR DIFFUSION COUNCIL'S BE TESTED IN ACCORDANCE WITH THE AIR DIFFUSION COUNCIL'S BE TESTED IN ACCORDANCE WITH THE AIR DIFFUSION COUNCIL'S TESTED IN ACCORDANCE WITH THE AIR DIFFUSION COUNCIL'S TESTED IN ACCORDANCE WITH THE AIR DIFFUSION COUNCIL'S IN ACCORDANCE WITH THE AIR DIFFUSION COUNCIL'S IN ACCORDANCE WITH THE AIR DIFFUSION COUNCIL'S ACCORDANCE WITH THE AIR DIFFUSION COUNCIL'S ACCORDANCE WITH THE AIR DIFFUSION COUNCIL'S WITH THE AIR DIFFUSION COUNCIL'S WITH THE AIR DIFFUSION COUNCIL'S THE AIR DIFFUSION COUNCIL'S THE AIR DIFFUSION COUNCIL'S AIR DIFFUSION COUNCIL'S AIR DIFFUSION COUNCIL'S DIFFUSION COUNCIL'S DIFFUSION COUNCIL'S COUNCIL'S COUNCIL'S "FLEXIBLE AIR DUCT TEST CODE FD 72-R1, SECTION 3.0, SOUND PROPERTIES."

AutoCAD SHX Text

4.FLEXIBLE DUCT FITTINGS: GALVANIZED STEEL, TWIST-IN DESIGN WITH DAMPER. SIZE AS INDICATED.FLEXIBLE DUCT FITTINGS: GALVANIZED STEEL, TWIST-IN DESIGN WITH DAMPER. SIZE AS INDICATED.

AutoCAD SHX Text

5.FLEXIBLE DUCT CLAMPS: STAINLESS-STEEL BAND WITH CADMIUM-PLATED HEX SCREW TO TIGHTEN BAND FLEXIBLE DUCT CLAMPS: STAINLESS-STEEL BAND WITH CADMIUM-PLATED HEX SCREW TO TIGHTEN BAND DUCT CLAMPS: STAINLESS-STEEL BAND WITH CADMIUM-PLATED HEX SCREW TO TIGHTEN BAND DUCT CLAMPS: STAINLESS-STEEL BAND WITH CADMIUM-PLATED HEX SCREW TO TIGHTEN BAND CLAMPS: STAINLESS-STEEL BAND WITH CADMIUM-PLATED HEX SCREW TO TIGHTEN BAND CLAMPS: STAINLESS-STEEL BAND WITH CADMIUM-PLATED HEX SCREW TO TIGHTEN BAND STAINLESS-STEEL BAND WITH CADMIUM-PLATED HEX SCREW TO TIGHTEN BAND STAINLESS-STEEL BAND WITH CADMIUM-PLATED HEX SCREW TO TIGHTEN BAND BAND WITH CADMIUM-PLATED HEX SCREW TO TIGHTEN BAND BAND WITH CADMIUM-PLATED HEX SCREW TO TIGHTEN BAND WITH CADMIUM-PLATED HEX SCREW TO TIGHTEN BAND WITH CADMIUM-PLATED HEX SCREW TO TIGHTEN BAND CADMIUM-PLATED HEX SCREW TO TIGHTEN BAND CADMIUM-PLATED HEX SCREW TO TIGHTEN BAND HEX SCREW TO TIGHTEN BAND HEX SCREW TO TIGHTEN BAND SCREW TO TIGHTEN BAND SCREW TO TIGHTEN BAND TO TIGHTEN BAND TO TIGHTEN BAND TIGHTEN BAND TIGHTEN BAND BAND BAND WITH A WORM-GEAR ACTION, IN SIZES 3 THROUGH 18 INCHES TO SUIT DUCT SIZE.

AutoCAD SHX Text

6.MANUFACTURERS: FLEXMASTER U.S.A., INC. | AUTOMATION INDUSTRIES THERMAFLEX | HART & COOLEY, INC.MANUFACTURERS: FLEXMASTER U.S.A., INC. | AUTOMATION INDUSTRIES THERMAFLEX | HART & COOLEY, INC.

AutoCAD SHX Text

F.FLEXIBLE DUCT ELBOW SUPPORTS:FLEXIBLE DUCT ELBOW SUPPORTS:

AutoCAD SHX Text

1.ELBOW SUPPORTS SHALL BE CONSTRUCTED OF DURABLE COMPOSITE MATERIAL AND BE FULLY ADJUSTABLE ELBOW SUPPORTS SHALL BE CONSTRUCTED OF DURABLE COMPOSITE MATERIAL AND BE FULLY ADJUSTABLE SUPPORTS SHALL BE CONSTRUCTED OF DURABLE COMPOSITE MATERIAL AND BE FULLY ADJUSTABLE SUPPORTS SHALL BE CONSTRUCTED OF DURABLE COMPOSITE MATERIAL AND BE FULLY ADJUSTABLE SHALL BE CONSTRUCTED OF DURABLE COMPOSITE MATERIAL AND BE FULLY ADJUSTABLE SHALL BE CONSTRUCTED OF DURABLE COMPOSITE MATERIAL AND BE FULLY ADJUSTABLE BE CONSTRUCTED OF DURABLE COMPOSITE MATERIAL AND BE FULLY ADJUSTABLE BE CONSTRUCTED OF DURABLE COMPOSITE MATERIAL AND BE FULLY ADJUSTABLE CONSTRUCTED OF DURABLE COMPOSITE MATERIAL AND BE FULLY ADJUSTABLE CONSTRUCTED OF DURABLE COMPOSITE MATERIAL AND BE FULLY ADJUSTABLE OF DURABLE COMPOSITE MATERIAL AND BE FULLY ADJUSTABLE OF DURABLE COMPOSITE MATERIAL AND BE FULLY ADJUSTABLE DURABLE COMPOSITE MATERIAL AND BE FULLY ADJUSTABLE DURABLE COMPOSITE MATERIAL AND BE FULLY ADJUSTABLE COMPOSITE MATERIAL AND BE FULLY ADJUSTABLE COMPOSITE MATERIAL AND BE FULLY ADJUSTABLE MATERIAL AND BE FULLY ADJUSTABLE MATERIAL AND BE FULLY ADJUSTABLE AND BE FULLY ADJUSTABLE AND BE FULLY ADJUSTABLE BE FULLY ADJUSTABLE BE FULLY ADJUSTABLE FULLY ADJUSTABLE FULLY ADJUSTABLE ADJUSTABLE ADJUSTABLE TO SUPPORT FLEXIBLE DUCT DIAMETERS 6 INCHES THROUGH 16 INCHES.

AutoCAD SHX Text

2.ELBOW SUPPORTS SHALL BE UL LISTED FOR USE IN RETURN AIR PLENUM SPACES. ELBOW SUPPORTS SHALL BE UL LISTED FOR USE IN RETURN AIR PLENUM SPACES.

AutoCAD SHX Text

3.MANUFACTURERS: AUTOMATION INDUSTRIES THERMAFLEX; FLEXFLOW ELBOW | SMART AIR & ENERGY MANUFACTURERS: AUTOMATION INDUSTRIES THERMAFLEX; FLEXFLOW ELBOW | SMART AIR & ENERGY AUTOMATION INDUSTRIES THERMAFLEX; FLEXFLOW ELBOW | SMART AIR & ENERGY AUTOMATION INDUSTRIES THERMAFLEX; FLEXFLOW ELBOW | SMART AIR & ENERGY AUTOMATION INDUSTRIES THERMAFLEX; FLEXFLOW ELBOW | SMART AIR & ENERGY INDUSTRIES THERMAFLEX; FLEXFLOW ELBOW | SMART AIR & ENERGY INDUSTRIES THERMAFLEX; FLEXFLOW ELBOW | SMART AIR & ENERGY THERMAFLEX; FLEXFLOW ELBOW | SMART AIR & ENERGY THERMAFLEX; FLEXFLOW ELBOW | SMART AIR & ENERGY FLEXFLOW ELBOW | SMART AIR & ENERGY FLEXFLOW ELBOW | SMART AIR & ENERGY ELBOW | SMART AIR & ENERGY ELBOW | SMART AIR & ENERGY | SMART AIR & ENERGY | SMART AIR & ENERGY SMART AIR & ENERGY SMART AIR & ENERGY AIR & ENERGY AIR & ENERGY & ENERGY & ENERGY ENERGY ENERGY SOLUTIONS; SMART FLOW ELBOW.

AutoCAD SHX Text

G.DUCT ACCESSORY HARDWARE: ADHESIVES: HIGH STRENGTH, QUICK SETTING, NEOPRENE BASED, WATERPROOF, DUCT ACCESSORY HARDWARE: ADHESIVES: HIGH STRENGTH, QUICK SETTING, NEOPRENE BASED, WATERPROOF, ACCESSORY HARDWARE: ADHESIVES: HIGH STRENGTH, QUICK SETTING, NEOPRENE BASED, WATERPROOF, ACCESSORY HARDWARE: ADHESIVES: HIGH STRENGTH, QUICK SETTING, NEOPRENE BASED, WATERPROOF, HARDWARE: ADHESIVES: HIGH STRENGTH, QUICK SETTING, NEOPRENE BASED, WATERPROOF, HARDWARE: ADHESIVES: HIGH STRENGTH, QUICK SETTING, NEOPRENE BASED, WATERPROOF, ADHESIVES: HIGH STRENGTH, QUICK SETTING, NEOPRENE BASED, WATERPROOF, ADHESIVES: HIGH STRENGTH, QUICK SETTING, NEOPRENE BASED, WATERPROOF, ADHESIVES: HIGH STRENGTH, QUICK SETTING, NEOPRENE BASED, WATERPROOF, HIGH STRENGTH, QUICK SETTING, NEOPRENE BASED, WATERPROOF, HIGH STRENGTH, QUICK SETTING, NEOPRENE BASED, WATERPROOF, STRENGTH, QUICK SETTING, NEOPRENE BASED, WATERPROOF, STRENGTH, QUICK SETTING, NEOPRENE BASED, WATERPROOF, QUICK SETTING, NEOPRENE BASED, WATERPROOF, QUICK SETTING, NEOPRENE BASED, WATERPROOF, SETTING, NEOPRENE BASED, WATERPROOF, SETTING, NEOPRENE BASED, WATERPROOF, NEOPRENE BASED, WATERPROOF, NEOPRENE BASED, WATERPROOF, BASED, WATERPROOF, BASED, WATERPROOF, WATERPROOF, WATERPROOF, AND RESISTANT TO GASOLINE AND GREASE.

AutoCAD SHX Text

DIFFUSERS, REGISTERS, AND GRILLES

AutoCAD SHX Text

A.AIR DIFFUSION DEVICES ARE SCHEDULED ON THE DRAWINGS.AIR DIFFUSION DEVICES ARE SCHEDULED ON THE DRAWINGS.

AutoCAD SHX Text

1.MANUFACTURERS: KREUGER| NAILOR INDUSTRIES | PRICE INDUSTRIES | TITUS | TUTTLE & BAILEY.MANUFACTURERS: KREUGER| NAILOR INDUSTRIES | PRICE INDUSTRIES | TITUS | TUTTLE & BAILEY.

AutoCAD SHX Text

2.PROVIDE PLASTER FRAMES FOR UNITS INSTALLED IN PLASTER CEILINGS.PROVIDE PLASTER FRAMES FOR UNITS INSTALLED IN PLASTER CEILINGS.

AutoCAD SHX Text

3.PROVIDE GASKETS FOR SUPPLY TERMINAL AIR DEVICES MOUNTED IN FINISHED SURFACES.PROVIDE GASKETS FOR SUPPLY TERMINAL AIR DEVICES MOUNTED IN FINISHED SURFACES.

AutoCAD SHX Text

4.AIR DIFFUSION DEVICE FACE AND VISIBLE TRIM: STANDARD OFF WHITE BAKED ENAMEL FINISH UNLESS AIR DIFFUSION DEVICE FACE AND VISIBLE TRIM: STANDARD OFF WHITE BAKED ENAMEL FINISH UNLESS DIFFUSION DEVICE FACE AND VISIBLE TRIM: STANDARD OFF WHITE BAKED ENAMEL FINISH UNLESS DIFFUSION DEVICE FACE AND VISIBLE TRIM: STANDARD OFF WHITE BAKED ENAMEL FINISH UNLESS DEVICE FACE AND VISIBLE TRIM: STANDARD OFF WHITE BAKED ENAMEL FINISH UNLESS DEVICE FACE AND VISIBLE TRIM: STANDARD OFF WHITE BAKED ENAMEL FINISH UNLESS FACE AND VISIBLE TRIM: STANDARD OFF WHITE BAKED ENAMEL FINISH UNLESS FACE AND VISIBLE TRIM: STANDARD OFF WHITE BAKED ENAMEL FINISH UNLESS AND VISIBLE TRIM: STANDARD OFF WHITE BAKED ENAMEL FINISH UNLESS AND VISIBLE TRIM: STANDARD OFF WHITE BAKED ENAMEL FINISH UNLESS VISIBLE TRIM: STANDARD OFF WHITE BAKED ENAMEL FINISH UNLESS VISIBLE TRIM: STANDARD OFF WHITE BAKED ENAMEL FINISH UNLESS TRIM: STANDARD OFF WHITE BAKED ENAMEL FINISH UNLESS TRIM: STANDARD OFF WHITE BAKED ENAMEL FINISH UNLESS STANDARD OFF WHITE BAKED ENAMEL FINISH UNLESS STANDARD OFF WHITE BAKED ENAMEL FINISH UNLESS STANDARD OFF WHITE BAKED ENAMEL FINISH UNLESS OFF WHITE BAKED ENAMEL FINISH UNLESS OFF WHITE BAKED ENAMEL FINISH UNLESS WHITE BAKED ENAMEL FINISH UNLESS WHITE BAKED ENAMEL FINISH UNLESS BAKED ENAMEL FINISH UNLESS BAKED ENAMEL FINISH UNLESS ENAMEL FINISH UNLESS ENAMEL FINISH UNLESS FINISH UNLESS FINISH UNLESS UNLESS UNLESS NOTED OTHERWISE.

AutoCAD SHX Text

5.AIR DIFFUSION DEVICE INTERIOR SURFACES, INCLUDING BLANK-OFFS: BLACK MATTE FINISH.AIR DIFFUSION DEVICE INTERIOR SURFACES, INCLUDING BLANK-OFFS: BLACK MATTE FINISH.

AutoCAD SHX Text

UNITARY ROOFTOP AIR CONDITIONERS

AutoCAD SHX Text

A.UNITARY ROOFTOP AIR CONDITIONERS: BASIS OF DESIGN UNITS ARE SCHEDULED ON THE DRAWINGS. PROVIDE UNITARY ROOFTOP AIR CONDITIONERS: BASIS OF DESIGN UNITS ARE SCHEDULED ON THE DRAWINGS. PROVIDE ROOFTOP AIR CONDITIONERS: BASIS OF DESIGN UNITS ARE SCHEDULED ON THE DRAWINGS. PROVIDE ROOFTOP AIR CONDITIONERS: BASIS OF DESIGN UNITS ARE SCHEDULED ON THE DRAWINGS. PROVIDE AIR CONDITIONERS: BASIS OF DESIGN UNITS ARE SCHEDULED ON THE DRAWINGS. PROVIDE AIR CONDITIONERS: BASIS OF DESIGN UNITS ARE SCHEDULED ON THE DRAWINGS. PROVIDE CONDITIONERS: BASIS OF DESIGN UNITS ARE SCHEDULED ON THE DRAWINGS. PROVIDE CONDITIONERS: BASIS OF DESIGN UNITS ARE SCHEDULED ON THE DRAWINGS. PROVIDE BASIS OF DESIGN UNITS ARE SCHEDULED ON THE DRAWINGS. PROVIDE BASIS OF DESIGN UNITS ARE SCHEDULED ON THE DRAWINGS. PROVIDE BASIS OF DESIGN UNITS ARE SCHEDULED ON THE DRAWINGS. PROVIDE OF DESIGN UNITS ARE SCHEDULED ON THE DRAWINGS. PROVIDE OF DESIGN UNITS ARE SCHEDULED ON THE DRAWINGS. PROVIDE DESIGN UNITS ARE SCHEDULED ON THE DRAWINGS. PROVIDE DESIGN UNITS ARE SCHEDULED ON THE DRAWINGS. PROVIDE UNITS ARE SCHEDULED ON THE DRAWINGS. PROVIDE UNITS ARE SCHEDULED ON THE DRAWINGS. PROVIDE ARE SCHEDULED ON THE DRAWINGS. PROVIDE ARE SCHEDULED ON THE DRAWINGS. PROVIDE SCHEDULED ON THE DRAWINGS. PROVIDE SCHEDULED ON THE DRAWINGS. PROVIDE ON THE DRAWINGS. PROVIDE ON THE DRAWINGS. PROVIDE THE DRAWINGS. PROVIDE THE DRAWINGS. PROVIDE DRAWINGS. PROVIDE DRAWINGS. PROVIDE PROVIDE PROVIDE PROVIDE THE PRODUCT INDICATED ON DRAWINGS OR A COMPARABLE PRODUCT BY ONE OF THE FOLLOWING:

AutoCAD SHX Text

1.AAON INC. | CARRIER CORP. | LENNOX INDUSTRIES INC. | TRANE COMPANY (THE); PRECEDENT | JOHNSON AAON INC. | CARRIER CORP. | LENNOX INDUSTRIES INC. | TRANE COMPANY (THE); PRECEDENT | JOHNSON INC. | CARRIER CORP. | LENNOX INDUSTRIES INC. | TRANE COMPANY (THE); PRECEDENT | JOHNSON INC. | CARRIER CORP. | LENNOX INDUSTRIES INC. | TRANE COMPANY (THE); PRECEDENT | JOHNSON | CARRIER CORP. | LENNOX INDUSTRIES INC. | TRANE COMPANY (THE); PRECEDENT | JOHNSON | CARRIER CORP. | LENNOX INDUSTRIES INC. | TRANE COMPANY (THE); PRECEDENT | JOHNSON CARRIER CORP. | LENNOX INDUSTRIES INC. | TRANE COMPANY (THE); PRECEDENT | JOHNSON CARRIER CORP. | LENNOX INDUSTRIES INC. | TRANE COMPANY (THE); PRECEDENT | JOHNSON CORP. | LENNOX INDUSTRIES INC. | TRANE COMPANY (THE); PRECEDENT | JOHNSON CORP. | LENNOX INDUSTRIES INC. | TRANE COMPANY (THE); PRECEDENT | JOHNSON | LENNOX INDUSTRIES INC. | TRANE COMPANY (THE); PRECEDENT | JOHNSON | LENNOX INDUSTRIES INC. | TRANE COMPANY (THE); PRECEDENT | JOHNSON LENNOX INDUSTRIES INC. | TRANE COMPANY (THE); PRECEDENT | JOHNSON LENNOX INDUSTRIES INC. | TRANE COMPANY (THE); PRECEDENT | JOHNSON INDUSTRIES INC. | TRANE COMPANY (THE); PRECEDENT | JOHNSON INDUSTRIES INC. | TRANE COMPANY (THE); PRECEDENT | JOHNSON INC. | TRANE COMPANY (THE); PRECEDENT | JOHNSON INC. | TRANE COMPANY (THE); PRECEDENT | JOHNSON | TRANE COMPANY (THE); PRECEDENT | JOHNSON | TRANE COMPANY (THE); PRECEDENT | JOHNSON TRANE COMPANY (THE); PRECEDENT | JOHNSON TRANE COMPANY (THE); PRECEDENT | JOHNSON COMPANY (THE); PRECEDENT | JOHNSON COMPANY (THE); PRECEDENT | JOHNSON (THE); PRECEDENT | JOHNSON (THE); PRECEDENT | JOHNSON PRECEDENT | JOHNSON PRECEDENT | JOHNSON | JOHNSON | JOHNSON JOHNSON JOHNSON CONTROLS INCORPORATED/YORK;ENGINEERED SYSTEMS GROUP.

AutoCAD SHX Text

B.FURNISH EXTRA MATERIALS DESCRIBED BELOW THAT MATCH PRODUCTS INSTALLED AND THAT ARE PACKAGED FURNISH EXTRA MATERIALS DESCRIBED BELOW THAT MATCH PRODUCTS INSTALLED AND THAT ARE PACKAGED EXTRA MATERIALS DESCRIBED BELOW THAT MATCH PRODUCTS INSTALLED AND THAT ARE PACKAGED EXTRA MATERIALS DESCRIBED BELOW THAT MATCH PRODUCTS INSTALLED AND THAT ARE PACKAGED MATERIALS DESCRIBED BELOW THAT MATCH PRODUCTS INSTALLED AND THAT ARE PACKAGED MATERIALS DESCRIBED BELOW THAT MATCH PRODUCTS INSTALLED AND THAT ARE PACKAGED DESCRIBED BELOW THAT MATCH PRODUCTS INSTALLED AND THAT ARE PACKAGED DESCRIBED BELOW THAT MATCH PRODUCTS INSTALLED AND THAT ARE PACKAGED BELOW THAT MATCH PRODUCTS INSTALLED AND THAT ARE PACKAGED BELOW THAT MATCH PRODUCTS INSTALLED AND THAT ARE PACKAGED THAT MATCH PRODUCTS INSTALLED AND THAT ARE PACKAGED THAT MATCH PRODUCTS INSTALLED AND THAT ARE PACKAGED MATCH PRODUCTS INSTALLED AND THAT ARE PACKAGED MATCH PRODUCTS INSTALLED AND THAT ARE PACKAGED PRODUCTS INSTALLED AND THAT ARE PACKAGED PRODUCTS INSTALLED AND THAT ARE PACKAGED INSTALLED AND THAT ARE PACKAGED INSTALLED AND THAT ARE PACKAGED AND THAT ARE PACKAGED AND THAT ARE PACKAGED THAT ARE PACKAGED THAT ARE PACKAGED ARE PACKAGED ARE PACKAGED PACKAGED PACKAGED WITH PROTECTIVE COVERING FOR STORAGE AND IDENTIFIED WITH LABELS DESCRIBING CONTENTS.

AutoCAD SHX Text

1.FAN BELTS: ONE SET FOR EACH BELT-DRIVE FAN.FAN BELTS: ONE SET FOR EACH BELT-DRIVE FAN.

AutoCAD SHX Text

2.FILTERS: ONE SET OF FILTERS FOR EACH UNIT.FILTERS: ONE SET OF FILTERS FOR EACH UNIT.

AutoCAD SHX Text

C.UTILIZE EXISTING ROOF CURB. PROVIDE CURB ADAPTOR TO MATE UNIT TO EXISTING CURB.UTILIZE EXISTING ROOF CURB. PROVIDE CURB ADAPTOR TO MATE UNIT TO EXISTING CURB.

AutoCAD SHX Text

D.CURB ADAPTOR: STEEL WITH CORROSION-PROTECTION COATING, GASKETING, AND FACTORY-INSTALLED WOOD CURB ADAPTOR: STEEL WITH CORROSION-PROTECTION COATING, GASKETING, AND FACTORY-INSTALLED WOOD ADAPTOR: STEEL WITH CORROSION-PROTECTION COATING, GASKETING, AND FACTORY-INSTALLED WOOD ADAPTOR: STEEL WITH CORROSION-PROTECTION COATING, GASKETING, AND FACTORY-INSTALLED WOOD STEEL WITH CORROSION-PROTECTION COATING, GASKETING, AND FACTORY-INSTALLED WOOD STEEL WITH CORROSION-PROTECTION COATING, GASKETING, AND FACTORY-INSTALLED WOOD WITH CORROSION-PROTECTION COATING, GASKETING, AND FACTORY-INSTALLED WOOD WITH CORROSION-PROTECTION COATING, GASKETING, AND FACTORY-INSTALLED WOOD CORROSION-PROTECTION COATING, GASKETING, AND FACTORY-INSTALLED WOOD CORROSION-PROTECTION COATING, GASKETING, AND FACTORY-INSTALLED WOOD COATING, GASKETING, AND FACTORY-INSTALLED WOOD COATING, GASKETING, AND FACTORY-INSTALLED WOOD GASKETING, AND FACTORY-INSTALLED WOOD GASKETING, AND FACTORY-INSTALLED WOOD AND FACTORY-INSTALLED WOOD AND FACTORY-INSTALLED WOOD FACTORY-INSTALLED WOOD FACTORY-INSTALLED WOOD WOOD WOOD NAILER; COMPLYING WITH NRCA STANDARDS. TOP OF CURB SHALL BE LEVEL AND HEIGHT SHALL BE AS COMPLYING WITH NRCA STANDARDS. TOP OF CURB SHALL BE LEVEL AND HEIGHT SHALL BE AS COMPLYING WITH NRCA STANDARDS. TOP OF CURB SHALL BE LEVEL AND HEIGHT SHALL BE AS WITH NRCA STANDARDS. TOP OF CURB SHALL BE LEVEL AND HEIGHT SHALL BE AS WITH NRCA STANDARDS. TOP OF CURB SHALL BE LEVEL AND HEIGHT SHALL BE AS NRCA STANDARDS. TOP OF CURB SHALL BE LEVEL AND HEIGHT SHALL BE AS NRCA STANDARDS. TOP OF CURB SHALL BE LEVEL AND HEIGHT SHALL BE AS STANDARDS. TOP OF CURB SHALL BE LEVEL AND HEIGHT SHALL BE AS STANDARDS. TOP OF CURB SHALL BE LEVEL AND HEIGHT SHALL BE AS TOP OF CURB SHALL BE LEVEL AND HEIGHT SHALL BE AS TOP OF CURB SHALL BE LEVEL AND HEIGHT SHALL BE AS OF CURB SHALL BE LEVEL AND HEIGHT SHALL BE AS OF CURB SHALL BE LEVEL AND HEIGHT SHALL BE AS CURB SHALL BE LEVEL AND HEIGHT SHALL BE AS CURB SHALL BE LEVEL AND HEIGHT SHALL BE AS SHALL BE LEVEL AND HEIGHT SHALL BE AS SHALL BE LEVEL AND HEIGHT SHALL BE AS BE LEVEL AND HEIGHT SHALL BE AS BE LEVEL AND HEIGHT SHALL BE AS LEVEL AND HEIGHT SHALL BE AS LEVEL AND HEIGHT SHALL BE AS AND HEIGHT SHALL BE AS AND HEIGHT SHALL BE AS HEIGHT SHALL BE AS HEIGHT SHALL BE AS SHALL BE AS SHALL BE AS BE AS BE AS AS AS SCHEDULED.

AutoCAD SHX Text

E.MOTORS: COMPLY WITH REQUIREMENTS IN "MOTORS."MOTORS: COMPLY WITH REQUIREMENTS IN "MOTORS."

AutoCAD SHX Text

F.EVAPTORATOR FAN FOR RTU-4 SHALL BE MULTISPEED MOTOR; FAN FOR RTU-4 SHALL HAVE VARIABLE SPEED EVAPTORATOR FAN FOR RTU-4 SHALL BE MULTISPEED MOTOR; FAN FOR RTU-4 SHALL HAVE VARIABLE SPEED FAN FOR RTU-4 SHALL BE MULTISPEED MOTOR; FAN FOR RTU-4 SHALL HAVE VARIABLE SPEED FAN FOR RTU-4 SHALL BE MULTISPEED MOTOR; FAN FOR RTU-4 SHALL HAVE VARIABLE SPEED FOR RTU-4 SHALL BE MULTISPEED MOTOR; FAN FOR RTU-4 SHALL HAVE VARIABLE SPEED FOR RTU-4 SHALL BE MULTISPEED MOTOR; FAN FOR RTU-4 SHALL HAVE VARIABLE SPEED RTU-4 SHALL BE MULTISPEED MOTOR; FAN FOR RTU-4 SHALL HAVE VARIABLE SPEED RTU-4 SHALL BE MULTISPEED MOTOR; FAN FOR RTU-4 SHALL HAVE VARIABLE SPEED SHALL BE MULTISPEED MOTOR; FAN FOR RTU-4 SHALL HAVE VARIABLE SPEED SHALL BE MULTISPEED MOTOR; FAN FOR RTU-4 SHALL HAVE VARIABLE SPEED BE MULTISPEED MOTOR; FAN FOR RTU-4 SHALL HAVE VARIABLE SPEED BE MULTISPEED MOTOR; FAN FOR RTU-4 SHALL HAVE VARIABLE SPEED MULTISPEED MOTOR; FAN FOR RTU-4 SHALL HAVE VARIABLE SPEED MULTISPEED MOTOR; FAN FOR RTU-4 SHALL HAVE VARIABLE SPEED MOTOR; FAN FOR RTU-4 SHALL HAVE VARIABLE SPEED MOTOR; FAN FOR RTU-4 SHALL HAVE VARIABLE SPEED FAN FOR RTU-4 SHALL HAVE VARIABLE SPEED FAN FOR RTU-4 SHALL HAVE VARIABLE SPEED FOR RTU-4 SHALL HAVE VARIABLE SPEED FOR RTU-4 SHALL HAVE VARIABLE SPEED RTU-4 SHALL HAVE VARIABLE SPEED RTU-4 SHALL HAVE VARIABLE SPEED SHALL HAVE VARIABLE SPEED SHALL HAVE VARIABLE SPEED HAVE VARIABLE SPEED HAVE VARIABLE SPEED VARIABLE SPEED VARIABLE SPEED SPEED SPEED CONTROLLER.

AutoCAD SHX Text

G.RTU-4 SHALL HAVE MULTIPLE COMPRESSWORS FOR MINIMUM 2-STAGE OF COOLING.RTU-4 SHALL HAVE MULTIPLE COMPRESSWORS FOR MINIMUM 2-STAGE OF COOLING.

AutoCAD SHX Text

H.HOIST, TRANSPORT, AND RIG AIR CONDITIONING UNITS OR THEIR SHIPPING SECTIONS INTO POSITION FOLLOWING HOIST, TRANSPORT, AND RIG AIR CONDITIONING UNITS OR THEIR SHIPPING SECTIONS INTO POSITION FOLLOWING TRANSPORT, AND RIG AIR CONDITIONING UNITS OR THEIR SHIPPING SECTIONS INTO POSITION FOLLOWING TRANSPORT, AND RIG AIR CONDITIONING UNITS OR THEIR SHIPPING SECTIONS INTO POSITION FOLLOWING AND RIG AIR CONDITIONING UNITS OR THEIR SHIPPING SECTIONS INTO POSITION FOLLOWING AND RIG AIR CONDITIONING UNITS OR THEIR SHIPPING SECTIONS INTO POSITION FOLLOWING RIG AIR CONDITIONING UNITS OR THEIR SHIPPING SECTIONS INTO POSITION FOLLOWING RIG AIR CONDITIONING UNITS OR THEIR SHIPPING SECTIONS INTO POSITION FOLLOWING AIR CONDITIONING UNITS OR THEIR SHIPPING SECTIONS INTO POSITION FOLLOWING AIR CONDITIONING UNITS OR THEIR SHIPPING SECTIONS INTO POSITION FOLLOWING CONDITIONING UNITS OR THEIR SHIPPING SECTIONS INTO POSITION FOLLOWING CONDITIONING UNITS OR THEIR SHIPPING SECTIONS INTO POSITION FOLLOWING UNITS OR THEIR SHIPPING SECTIONS INTO POSITION FOLLOWING UNITS OR THEIR SHIPPING SECTIONS INTO POSITION FOLLOWING OR THEIR SHIPPING SECTIONS INTO POSITION FOLLOWING OR THEIR SHIPPING SECTIONS INTO POSITION FOLLOWING THEIR SHIPPING SECTIONS INTO POSITION FOLLOWING THEIR SHIPPING SECTIONS INTO POSITION FOLLOWING SHIPPING SECTIONS INTO POSITION FOLLOWING SHIPPING SECTIONS INTO POSITION FOLLOWING SECTIONS INTO POSITION FOLLOWING SECTIONS INTO POSITION FOLLOWING INTO POSITION FOLLOWING INTO POSITION FOLLOWING POSITION FOLLOWING POSITION FOLLOWING FOLLOWING FOLLOWING PROCEDURES RECOMMENDED BY THE MANUFACTURER.

AutoCAD SHX Text

I.INSTALL UNITS LEVEL AND PLUMB, MAINTAINING MANUFACTURER'S RECOMMENDED CLEARANCES. INSTALL INSTALL UNITS LEVEL AND PLUMB, MAINTAINING MANUFACTURER'S RECOMMENDED CLEARANCES. INSTALL UNITS LEVEL AND PLUMB, MAINTAINING MANUFACTURER'S RECOMMENDED CLEARANCES. INSTALL UNITS LEVEL AND PLUMB, MAINTAINING MANUFACTURER'S RECOMMENDED CLEARANCES. INSTALL LEVEL AND PLUMB, MAINTAINING MANUFACTURER'S RECOMMENDED CLEARANCES. INSTALL LEVEL AND PLUMB, MAINTAINING MANUFACTURER'S RECOMMENDED CLEARANCES. INSTALL AND PLUMB, MAINTAINING MANUFACTURER'S RECOMMENDED CLEARANCES. INSTALL AND PLUMB, MAINTAINING MANUFACTURER'S RECOMMENDED CLEARANCES. INSTALL PLUMB, MAINTAINING MANUFACTURER'S RECOMMENDED CLEARANCES. INSTALL PLUMB, MAINTAINING MANUFACTURER'S RECOMMENDED CLEARANCES. INSTALL MAINTAINING MANUFACTURER'S RECOMMENDED CLEARANCES. INSTALL MAINTAINING MANUFACTURER'S RECOMMENDED CLEARANCES. INSTALL MANUFACTURER'S RECOMMENDED CLEARANCES. INSTALL MANUFACTURER'S RECOMMENDED CLEARANCES. INSTALL RECOMMENDED CLEARANCES. INSTALL RECOMMENDED CLEARANCES. INSTALL CLEARANCES. INSTALL CLEARANCES. INSTALL INSTALL INSTALL ACCORDING TO ARI GUIDELINE B.

AutoCAD SHX Text

J.ENGAGE A FACTORY-AUTHORIZED SERVICE REPRESENTATIVE TO PERFORM STARTUP SERVICE.ENGAGE A FACTORY-AUTHORIZED SERVICE REPRESENTATIVE TO PERFORM STARTUP SERVICE.

AutoCAD SHX Text

TEMPERATURE CONTROLS

AutoCAD SHX Text

A.THERMOSTAT CONTROL WHERE INDICATED.THERMOSTAT CONTROL WHERE INDICATED.

AutoCAD SHX Text

B.ELECTRICAL COMPONENTS, DEVICES, AND ACCESSORIES: LISTED AND LABELED AS DEFINED IN NFPA 70, ELECTRICAL COMPONENTS, DEVICES, AND ACCESSORIES: LISTED AND LABELED AS DEFINED IN NFPA 70, COMPONENTS, DEVICES, AND ACCESSORIES: LISTED AND LABELED AS DEFINED IN NFPA 70, COMPONENTS, DEVICES, AND ACCESSORIES: LISTED AND LABELED AS DEFINED IN NFPA 70, DEVICES, AND ACCESSORIES: LISTED AND LABELED AS DEFINED IN NFPA 70, DEVICES, AND ACCESSORIES: LISTED AND LABELED AS DEFINED IN NFPA 70, AND ACCESSORIES: LISTED AND LABELED AS DEFINED IN NFPA 70, AND ACCESSORIES: LISTED AND LABELED AS DEFINED IN NFPA 70, ACCESSORIES: LISTED AND LABELED AS DEFINED IN NFPA 70, ACCESSORIES: LISTED AND LABELED AS DEFINED IN NFPA 70, LISTED AND LABELED AS DEFINED IN NFPA 70, LISTED AND LABELED AS DEFINED IN NFPA 70, LISTED AND LABELED AS DEFINED IN NFPA 70, AND LABELED AS DEFINED IN NFPA 70, AND LABELED AS DEFINED IN NFPA 70, LABELED AS DEFINED IN NFPA 70, LABELED AS DEFINED IN NFPA 70, AS DEFINED IN NFPA 70, AS DEFINED IN NFPA 70, DEFINED IN NFPA 70, DEFINED IN NFPA 70, IN NFPA 70, IN NFPA 70, NFPA 70, NFPA 70, 70, 70, ARTICLE 100, BY A TESTING AGENCY ACCEPTABLE TO AUTHORITIES HAVING JURISDICTION, AND MARKED FOR 100, BY A TESTING AGENCY ACCEPTABLE TO AUTHORITIES HAVING JURISDICTION, AND MARKED FOR 100, BY A TESTING AGENCY ACCEPTABLE TO AUTHORITIES HAVING JURISDICTION, AND MARKED FOR BY A TESTING AGENCY ACCEPTABLE TO AUTHORITIES HAVING JURISDICTION, AND MARKED FOR BY A TESTING AGENCY ACCEPTABLE TO AUTHORITIES HAVING JURISDICTION, AND MARKED FOR A TESTING AGENCY ACCEPTABLE TO AUTHORITIES HAVING JURISDICTION, AND MARKED FOR A TESTING AGENCY ACCEPTABLE TO AUTHORITIES HAVING JURISDICTION, AND MARKED FOR TESTING AGENCY ACCEPTABLE TO AUTHORITIES HAVING JURISDICTION, AND MARKED FOR TESTING AGENCY ACCEPTABLE TO AUTHORITIES HAVING JURISDICTION, AND MARKED FOR AGENCY ACCEPTABLE TO AUTHORITIES HAVING JURISDICTION, AND MARKED FOR AGENCY ACCEPTABLE TO AUTHORITIES HAVING JURISDICTION, AND MARKED FOR ACCEPTABLE TO AUTHORITIES HAVING JURISDICTION, AND MARKED FOR ACCEPTABLE TO AUTHORITIES HAVING JURISDICTION, AND MARKED FOR TO AUTHORITIES HAVING JURISDICTION, AND MARKED FOR TO AUTHORITIES HAVING JURISDICTION, AND MARKED FOR AUTHORITIES HAVING JURISDICTION, AND MARKED FOR AUTHORITIES HAVING JURISDICTION, AND MARKED FOR HAVING JURISDICTION, AND MARKED FOR HAVING JURISDICTION, AND MARKED FOR JURISDICTION, AND MARKED FOR JURISDICTION, AND MARKED FOR AND MARKED FOR AND MARKED FOR MARKED FOR MARKED FOR FOR FOR INTENDED USE.

AutoCAD SHX Text

C.COMPLY WITH NFPA 90A, "INSTALLATION OF AIR CONDITIONING AND VENTILATION SYSTEMS."COMPLY WITH NFPA 90A, "INSTALLATION OF AIR CONDITIONING AND VENTILATION SYSTEMS."

AutoCAD SHX Text

D.ELECTRICAL REQUIREMENTS FOR CONTROLS WORK: ELECTRICAL REQUIREMENTS FOR CONTROLS WORK:

AutoCAD SHX Text

1.INSTALL IN ACCORDANCE WITH MANUFACTURER'S INSTRUCTIONS.INSTALL IN ACCORDANCE WITH MANUFACTURER'S INSTRUCTIONS.

AutoCAD SHX Text

2.ELECTRICAL ACCESSORIES SUCH AS RELAYS, SWITCHES, CONTACTORS AND CONTROL TRANSFORMERS SHALL ELECTRICAL ACCESSORIES SUCH AS RELAYS, SWITCHES, CONTACTORS AND CONTROL TRANSFORMERS SHALL ACCESSORIES SUCH AS RELAYS, SWITCHES, CONTACTORS AND CONTROL TRANSFORMERS SHALL ACCESSORIES SUCH AS RELAYS, SWITCHES, CONTACTORS AND CONTROL TRANSFORMERS SHALL SUCH AS RELAYS, SWITCHES, CONTACTORS AND CONTROL TRANSFORMERS SHALL SUCH AS RELAYS, SWITCHES, CONTACTORS AND CONTROL TRANSFORMERS SHALL AS RELAYS, SWITCHES, CONTACTORS AND CONTROL TRANSFORMERS SHALL AS RELAYS, SWITCHES, CONTACTORS AND CONTROL TRANSFORMERS SHALL RELAYS, SWITCHES, CONTACTORS AND CONTROL TRANSFORMERS SHALL RELAYS, SWITCHES, CONTACTORS AND CONTROL TRANSFORMERS SHALL SWITCHES, CONTACTORS AND CONTROL TRANSFORMERS SHALL SWITCHES, CONTACTORS AND CONTROL TRANSFORMERS SHALL CONTACTORS AND CONTROL TRANSFORMERS SHALL CONTACTORS AND CONTROL TRANSFORMERS SHALL AND CONTROL TRANSFORMERS SHALL AND CONTROL TRANSFORMERS SHALL CONTROL TRANSFORMERS SHALL CONTROL TRANSFORMERS SHALL TRANSFORMERS SHALL TRANSFORMERS SHALL SHALL SHALL MEET THE REQUIREMENTS OF THE DIVISION 26 SPECIFICATIONS OF RESPECTIVE PROJECT.

AutoCAD SHX Text

3.ELECTRICAL WIRING AND CONDUIT SHALL MEET THE REQUIREMENTS OF THE DIVISION 26 SPECIFICATIONS. ELECTRICAL WIRING AND CONDUIT SHALL MEET THE REQUIREMENTS OF THE DIVISION 26 SPECIFICATIONS. WIRING AND CONDUIT SHALL MEET THE REQUIREMENTS OF THE DIVISION 26 SPECIFICATIONS. WIRING AND CONDUIT SHALL MEET THE REQUIREMENTS OF THE DIVISION 26 SPECIFICATIONS. AND CONDUIT SHALL MEET THE REQUIREMENTS OF THE DIVISION 26 SPECIFICATIONS. AND CONDUIT SHALL MEET THE REQUIREMENTS OF THE DIVISION 26 SPECIFICATIONS. CONDUIT SHALL MEET THE REQUIREMENTS OF THE DIVISION 26 SPECIFICATIONS. CONDUIT SHALL MEET THE REQUIREMENTS OF THE DIVISION 26 SPECIFICATIONS. SHALL MEET THE REQUIREMENTS OF THE DIVISION 26 SPECIFICATIONS. SHALL MEET THE REQUIREMENTS OF THE DIVISION 26 SPECIFICATIONS. MEET THE REQUIREMENTS OF THE DIVISION 26 SPECIFICATIONS. MEET THE REQUIREMENTS OF THE DIVISION 26 SPECIFICATIONS. THE REQUIREMENTS OF THE DIVISION 26 SPECIFICATIONS. THE REQUIREMENTS OF THE DIVISION 26 SPECIFICATIONS. REQUIREMENTS OF THE DIVISION 26 SPECIFICATIONS. REQUIREMENTS OF THE DIVISION 26 SPECIFICATIONS. OF THE DIVISION 26 SPECIFICATIONS. OF THE DIVISION 26 SPECIFICATIONS. THE DIVISION 26 SPECIFICATIONS. THE DIVISION 26 SPECIFICATIONS. DIVISION 26 SPECIFICATIONS. DIVISION 26 SPECIFICATIONS. 26 SPECIFICATIONS. 26 SPECIFICATIONS. SPECIFICATIONS. SPECIFICATIONS. ALL CONTROL WIRING IN MECHANICAL ROOMS AND ANY OTHER EXPOSED AREAS SHALL BE RUN IN CONDUIT. CONTROL WIRING IN MECHANICAL ROOMS AND ANY OTHER EXPOSED AREAS SHALL BE RUN IN CONDUIT. CONTROL WIRING IN MECHANICAL ROOMS AND ANY OTHER EXPOSED AREAS SHALL BE RUN IN CONDUIT. WIRING IN MECHANICAL ROOMS AND ANY OTHER EXPOSED AREAS SHALL BE RUN IN CONDUIT. WIRING IN MECHANICAL ROOMS AND ANY OTHER EXPOSED AREAS SHALL BE RUN IN CONDUIT. IN MECHANICAL ROOMS AND ANY OTHER EXPOSED AREAS SHALL BE RUN IN CONDUIT. IN MECHANICAL ROOMS AND ANY OTHER EXPOSED AREAS SHALL BE RUN IN CONDUIT. MECHANICAL ROOMS AND ANY OTHER EXPOSED AREAS SHALL BE RUN IN CONDUIT. MECHANICAL ROOMS AND ANY OTHER EXPOSED AREAS SHALL BE RUN IN CONDUIT. ROOMS AND ANY OTHER EXPOSED AREAS SHALL BE RUN IN CONDUIT. ROOMS AND ANY OTHER EXPOSED AREAS SHALL BE RUN IN CONDUIT. AND ANY OTHER EXPOSED AREAS SHALL BE RUN IN CONDUIT. AND ANY OTHER EXPOSED AREAS SHALL BE RUN IN CONDUIT. ANY OTHER EXPOSED AREAS SHALL BE RUN IN CONDUIT. ANY OTHER EXPOSED AREAS SHALL BE RUN IN CONDUIT. OTHER EXPOSED AREAS SHALL BE RUN IN CONDUIT. OTHER EXPOSED AREAS SHALL BE RUN IN CONDUIT. EXPOSED AREAS SHALL BE RUN IN CONDUIT. EXPOSED AREAS SHALL BE RUN IN CONDUIT. AREAS SHALL BE RUN IN CONDUIT. AREAS SHALL BE RUN IN CONDUIT. SHALL BE RUN IN CONDUIT. SHALL BE RUN IN CONDUIT. BE RUN IN CONDUIT. BE RUN IN CONDUIT. RUN IN CONDUIT. RUN IN CONDUIT. IN CONDUIT. IN CONDUIT. CONDUIT. CONDUIT. LOW VOLTAGE TEMPERATURE CONTROL WIRING IN CONCEALED ACCESSIBLE LOCATIONS (I.E. ABOVE LAY-IN VOLTAGE TEMPERATURE CONTROL WIRING IN CONCEALED ACCESSIBLE LOCATIONS (I.E. ABOVE LAY-IN VOLTAGE TEMPERATURE CONTROL WIRING IN CONCEALED ACCESSIBLE LOCATIONS (I.E. ABOVE LAY-IN TEMPERATURE CONTROL WIRING IN CONCEALED ACCESSIBLE LOCATIONS (I.E. ABOVE LAY-IN TEMPERATURE CONTROL WIRING IN CONCEALED ACCESSIBLE LOCATIONS (I.E. ABOVE LAY-IN CONTROL WIRING IN CONCEALED ACCESSIBLE LOCATIONS (I.E. ABOVE LAY-IN CONTROL WIRING IN CONCEALED ACCESSIBLE LOCATIONS (I.E. ABOVE LAY-IN WIRING IN CONCEALED ACCESSIBLE LOCATIONS (I.E. ABOVE LAY-IN WIRING IN CONCEALED ACCESSIBLE LOCATIONS (I.E. ABOVE LAY-IN IN CONCEALED ACCESSIBLE LOCATIONS (I.E. ABOVE LAY-IN IN CONCEALED ACCESSIBLE LOCATIONS (I.E. ABOVE LAY-IN CONCEALED ACCESSIBLE LOCATIONS (I.E. ABOVE LAY-IN CONCEALED ACCESSIBLE LOCATIONS (I.E. ABOVE LAY-IN ACCESSIBLE LOCATIONS (I.E. ABOVE LAY-IN ACCESSIBLE LOCATIONS (I.E. ABOVE LAY-IN LOCATIONS (I.E. ABOVE LAY-IN LOCATIONS (I.E. ABOVE LAY-IN (I.E. ABOVE LAY-IN (I.E. ABOVE LAY-IN ABOVE LAY-IN ABOVE LAY-IN LAY-IN LAY-IN CEILINGS), AS WELL AS LOW VOLTAGE TEMPERATURE CONTROL WIRING WITHIN PARTITIONS, MAY BE RUN AS WELL AS LOW VOLTAGE TEMPERATURE CONTROL WIRING WITHIN PARTITIONS, MAY BE RUN AS WELL AS LOW VOLTAGE TEMPERATURE CONTROL WIRING WITHIN PARTITIONS, MAY BE RUN WELL AS LOW VOLTAGE TEMPERATURE CONTROL WIRING WITHIN PARTITIONS, MAY BE RUN WELL AS LOW VOLTAGE TEMPERATURE CONTROL WIRING WITHIN PARTITIONS, MAY BE RUN AS LOW VOLTAGE TEMPERATURE CONTROL WIRING WITHIN PARTITIONS, MAY BE RUN AS LOW VOLTAGE TEMPERATURE CONTROL WIRING WITHIN PARTITIONS, MAY BE RUN LOW VOLTAGE TEMPERATURE CONTROL WIRING WITHIN PARTITIONS, MAY BE RUN LOW VOLTAGE TEMPERATURE CONTROL WIRING WITHIN PARTITIONS, MAY BE RUN VOLTAGE TEMPERATURE CONTROL WIRING WITHIN PARTITIONS, MAY BE RUN VOLTAGE TEMPERATURE CONTROL WIRING WITHIN PARTITIONS, MAY BE RUN TEMPERATURE CONTROL WIRING WITHIN PARTITIONS, MAY BE RUN TEMPERATURE CONTROL WIRING WITHIN PARTITIONS, MAY BE RUN CONTROL WIRING WITHIN PARTITIONS, MAY BE RUN CONTROL WIRING WITHIN PARTITIONS, MAY BE RUN WIRING WITHIN PARTITIONS, MAY BE RUN WIRING WITHIN PARTITIONS, MAY BE RUN WITHIN PARTITIONS, MAY BE RUN WITHIN PARTITIONS, MAY BE RUN PARTITIONS, MAY BE RUN PARTITIONS, MAY BE RUN MAY BE RUN MAY BE RUN BE RUN BE RUN RUN RUN USING PLENUM RATED CABLE, NEATLY TIE-WRAPPED AND FASTENED TO THE BUILDING STRUCTURE (NOT TO PLENUM RATED CABLE, NEATLY TIE-WRAPPED AND FASTENED TO THE BUILDING STRUCTURE (NOT TO PLENUM RATED CABLE, NEATLY TIE-WRAPPED AND FASTENED TO THE BUILDING STRUCTURE (NOT TO RATED CABLE, NEATLY TIE-WRAPPED AND FASTENED TO THE BUILDING STRUCTURE (NOT TO RATED CABLE, NEATLY TIE-WRAPPED AND FASTENED TO THE BUILDING STRUCTURE (NOT TO CABLE, NEATLY TIE-WRAPPED AND FASTENED TO THE BUILDING STRUCTURE (NOT TO CABLE, NEATLY TIE-WRAPPED AND FASTENED TO THE BUILDING STRUCTURE (NOT TO NEATLY TIE-WRAPPED AND FASTENED TO THE BUILDING STRUCTURE (NOT TO NEATLY TIE-WRAPPED AND FASTENED TO THE BUILDING STRUCTURE (NOT TO TIE-WRAPPED AND FASTENED TO THE BUILDING STRUCTURE (NOT TO TIE-WRAPPED AND FASTENED TO THE BUILDING STRUCTURE (NOT TO AND FASTENED TO THE BUILDING STRUCTURE (NOT TO AND FASTENED TO THE BUILDING STRUCTURE (NOT TO FASTENED TO THE BUILDING STRUCTURE (NOT TO FASTENED TO THE BUILDING STRUCTURE (NOT TO TO THE BUILDING STRUCTURE (NOT TO TO THE BUILDING STRUCTURE (NOT TO THE BUILDING STRUCTURE (NOT TO THE BUILDING STRUCTURE (NOT TO BUILDING STRUCTURE (NOT TO BUILDING STRUCTURE (NOT TO STRUCTURE (NOT TO STRUCTURE (NOT TO (NOT TO (NOT TO TO TO CEILING OR CEILING SUPPORT WIRES).

AutoCAD SHX Text

4.CONDUITS CARRYING CONTROL WIRING SHALL BE SIZED FOR A MAXIMUM FILL OF 40% OF CAPACITY.CONDUITS CARRYING CONTROL WIRING SHALL BE SIZED FOR A MAXIMUM FILL OF 40% OF CAPACITY.

AutoCAD SHX Text

5.WHERE RACEWAY IS REQUIRED, TWO SEPARATE RACEWAY SYSTEMS SHALL BE PROVIDED; ONE FOR A.C. WHERE RACEWAY IS REQUIRED, TWO SEPARATE RACEWAY SYSTEMS SHALL BE PROVIDED; ONE FOR A.C. RACEWAY IS REQUIRED, TWO SEPARATE RACEWAY SYSTEMS SHALL BE PROVIDED; ONE FOR A.C. RACEWAY IS REQUIRED, TWO SEPARATE RACEWAY SYSTEMS SHALL BE PROVIDED; ONE FOR A.C. IS REQUIRED, TWO SEPARATE RACEWAY SYSTEMS SHALL BE PROVIDED; ONE FOR A.C. IS REQUIRED, TWO SEPARATE RACEWAY SYSTEMS SHALL BE PROVIDED; ONE FOR A.C. REQUIRED, TWO SEPARATE RACEWAY SYSTEMS SHALL BE PROVIDED; ONE FOR A.C. REQUIRED, TWO SEPARATE RACEWAY SYSTEMS SHALL BE PROVIDED; ONE FOR A.C. TWO SEPARATE RACEWAY SYSTEMS SHALL BE PROVIDED; ONE FOR A.C. TWO SEPARATE RACEWAY SYSTEMS SHALL BE PROVIDED; ONE FOR A.C. SEPARATE RACEWAY SYSTEMS SHALL BE PROVIDED; ONE FOR A.C. SEPARATE RACEWAY SYSTEMS SHALL BE PROVIDED; ONE FOR A.C. RACEWAY SYSTEMS SHALL BE PROVIDED; ONE FOR A.C. RACEWAY SYSTEMS SHALL BE PROVIDED; ONE FOR A.C. SYSTEMS SHALL BE PROVIDED; ONE FOR A.C. SYSTEMS SHALL BE PROVIDED; ONE FOR A.C. SHALL BE PROVIDED; ONE FOR A.C. SHALL BE PROVIDED; ONE FOR A.C. BE PROVIDED; ONE FOR A.C. BE PROVIDED; ONE FOR A.C. PROVIDED; ONE FOR A.C. PROVIDED; ONE FOR A.C. ONE FOR A.C. ONE FOR A.C. FOR A.C. FOR A.C. A.C. A.C. WIRING AND THE OTHER FOR D.C. WIRING.

AutoCAD SHX Text

6.ALL CONTROL WIRING SIZES AND TYPES SHALL MEET OR EXCEED THE EQUIPMENT MANUFACTURER'S ALL CONTROL WIRING SIZES AND TYPES SHALL MEET OR EXCEED THE EQUIPMENT MANUFACTURER'S CONTROL WIRING SIZES AND TYPES SHALL MEET OR EXCEED THE EQUIPMENT MANUFACTURER'S CONTROL WIRING SIZES AND TYPES SHALL MEET OR EXCEED THE EQUIPMENT MANUFACTURER'S WIRING SIZES AND TYPES SHALL MEET OR EXCEED THE EQUIPMENT MANUFACTURER'S WIRING SIZES AND TYPES SHALL MEET OR EXCEED THE EQUIPMENT MANUFACTURER'S SIZES AND TYPES SHALL MEET OR EXCEED THE EQUIPMENT MANUFACTURER'S SIZES AND TYPES SHALL MEET OR EXCEED THE EQUIPMENT MANUFACTURER'S AND TYPES SHALL MEET OR EXCEED THE EQUIPMENT MANUFACTURER'S AND TYPES SHALL MEET OR EXCEED THE EQUIPMENT MANUFACTURER'S TYPES SHALL MEET OR EXCEED THE EQUIPMENT MANUFACTURER'S TYPES SHALL MEET OR EXCEED THE EQUIPMENT MANUFACTURER'S SHALL MEET OR EXCEED THE EQUIPMENT MANUFACTURER'S SHALL MEET OR EXCEED THE EQUIPMENT MANUFACTURER'S MEET OR EXCEED THE EQUIPMENT MANUFACTURER'S MEET OR EXCEED THE EQUIPMENT MANUFACTURER'S OR EXCEED THE EQUIPMENT MANUFACTURER'S OR EXCEED THE EQUIPMENT MANUFACTURER'S EXCEED THE EQUIPMENT MANUFACTURER'S EXCEED THE EQUIPMENT MANUFACTURER'S THE EQUIPMENT MANUFACTURER'S THE EQUIPMENT MANUFACTURER'S EQUIPMENT MANUFACTURER'S EQUIPMENT MANUFACTURER'S MANUFACTURER'S MANUFACTURER'S RECOMMENDATIONS.

AutoCAD SHX Text

E.INSTALLATION - CONTROL SYSTEMS:INSTALLATION - CONTROL SYSTEMS:

AutoCAD SHX Text

1.INSTALL IN ACCORDANCE WITH MANUFACTURER'S INSTRUCTIONS.INSTALL IN ACCORDANCE WITH MANUFACTURER'S INSTRUCTIONS.

AutoCAD SHX Text

2.CHECK AND VERIFY LOCATION OF TEMPERATURE SENSORS, THERMOSTATS AND OTHER EXPOSED CONTROL CHECK AND VERIFY LOCATION OF TEMPERATURE SENSORS, THERMOSTATS AND OTHER EXPOSED CONTROL AND VERIFY LOCATION OF TEMPERATURE SENSORS, THERMOSTATS AND OTHER EXPOSED CONTROL AND VERIFY LOCATION OF TEMPERATURE SENSORS, THERMOSTATS AND OTHER EXPOSED CONTROL VERIFY LOCATION OF TEMPERATURE SENSORS, THERMOSTATS AND OTHER EXPOSED CONTROL VERIFY LOCATION OF TEMPERATURE SENSORS, THERMOSTATS AND OTHER EXPOSED CONTROL LOCATION OF TEMPERATURE SENSORS, THERMOSTATS AND OTHER EXPOSED CONTROL LOCATION OF TEMPERATURE SENSORS, THERMOSTATS AND OTHER EXPOSED CONTROL OF TEMPERATURE SENSORS, THERMOSTATS AND OTHER EXPOSED CONTROL OF TEMPERATURE SENSORS, THERMOSTATS AND OTHER EXPOSED CONTROL TEMPERATURE SENSORS, THERMOSTATS AND OTHER EXPOSED CONTROL TEMPERATURE SENSORS, THERMOSTATS AND OTHER EXPOSED CONTROL SENSORS, THERMOSTATS AND OTHER EXPOSED CONTROL SENSORS, THERMOSTATS AND OTHER EXPOSED CONTROL THERMOSTATS AND OTHER EXPOSED CONTROL THERMOSTATS AND OTHER EXPOSED CONTROL AND OTHER EXPOSED CONTROL AND OTHER EXPOSED CONTROL OTHER EXPOSED CONTROL OTHER EXPOSED CONTROL EXPOSED CONTROL EXPOSED CONTROL CONTROL CONTROL SENSORS WITH PLANS AND ROOM DETAILS BEFORE INSTALLATION. LOCATE ROOM TEMPERATURE SENSORS WITH PLANS AND ROOM DETAILS BEFORE INSTALLATION. LOCATE ROOM TEMPERATURE SENSORS WITH PLANS AND ROOM DETAILS BEFORE INSTALLATION. LOCATE ROOM TEMPERATURE SENSORS PLANS AND ROOM DETAILS BEFORE INSTALLATION. LOCATE ROOM TEMPERATURE SENSORS PLANS AND ROOM DETAILS BEFORE INSTALLATION. LOCATE ROOM TEMPERATURE SENSORS AND ROOM DETAILS BEFORE INSTALLATION. LOCATE ROOM TEMPERATURE SENSORS AND ROOM DETAILS BEFORE INSTALLATION. LOCATE ROOM TEMPERATURE SENSORS ROOM DETAILS BEFORE INSTALLATION. LOCATE ROOM TEMPERATURE SENSORS ROOM DETAILS BEFORE INSTALLATION. LOCATE ROOM TEMPERATURE SENSORS DETAILS BEFORE INSTALLATION. LOCATE ROOM TEMPERATURE SENSORS DETAILS BEFORE INSTALLATION. LOCATE ROOM TEMPERATURE SENSORS BEFORE INSTALLATION. LOCATE ROOM TEMPERATURE SENSORS BEFORE INSTALLATION. LOCATE ROOM TEMPERATURE SENSORS INSTALLATION. LOCATE ROOM TEMPERATURE SENSORS INSTALLATION. LOCATE ROOM TEMPERATURE SENSORS LOCATE ROOM TEMPERATURE SENSORS LOCATE ROOM TEMPERATURE SENSORS ROOM TEMPERATURE SENSORS ROOM TEMPERATURE SENSORS TEMPERATURE SENSORS TEMPERATURE SENSORS SENSORS SENSORS AND THERMOSTATS 48 INCHES ABOVE FLOOR UNLESS NOTED OTHERWISE.

AutoCAD SHX Text

3.LOCATE ALL CONTROL COMPONENTS AND ACCESSORIES SUCH THAT THEY ARE EASILY ACCESSIBLE FOR LOCATE ALL CONTROL COMPONENTS AND ACCESSORIES SUCH THAT THEY ARE EASILY ACCESSIBLE FOR ALL CONTROL COMPONENTS AND ACCESSORIES SUCH THAT THEY ARE EASILY ACCESSIBLE FOR ALL CONTROL COMPONENTS AND ACCESSORIES SUCH THAT THEY ARE EASILY ACCESSIBLE FOR CONTROL COMPONENTS AND ACCESSORIES SUCH THAT THEY ARE EASILY ACCESSIBLE FOR CONTROL COMPONENTS AND ACCESSORIES SUCH THAT THEY ARE EASILY ACCESSIBLE FOR COMPONENTS AND ACCESSORIES SUCH THAT THEY ARE EASILY ACCESSIBLE FOR COMPONENTS AND ACCESSORIES SUCH THAT THEY ARE EASILY ACCESSIBLE FOR AND ACCESSORIES SUCH THAT THEY ARE EASILY ACCESSIBLE FOR AND ACCESSORIES SUCH THAT THEY ARE EASILY ACCESSIBLE FOR ACCESSORIES SUCH THAT THEY ARE EASILY ACCESSIBLE FOR ACCESSORIES SUCH THAT THEY ARE EASILY ACCESSIBLE FOR SUCH THAT THEY ARE EASILY ACCESSIBLE FOR SUCH THAT THEY ARE EASILY ACCESSIBLE FOR THAT THEY ARE EASILY ACCESSIBLE FOR THAT THEY ARE EASILY ACCESSIBLE FOR THEY ARE EASILY ACCESSIBLE FOR THEY ARE EASILY ACCESSIBLE FOR ARE EASILY ACCESSIBLE FOR ARE EASILY ACCESSIBLE FOR EASILY ACCESSIBLE FOR EASILY ACCESSIBLE FOR ACCESSIBLE FOR ACCESSIBLE FOR FOR FOR ADJUSTMENT, SERVICE AND REPLACEMENT.

AutoCAD SHX Text

4.LOCATE, SUPPORT AND INSTALL ALL CONTROL COMPONENTS AND ACCESSORIES SO THAT THEY WILL NOT BE LOCATE, SUPPORT AND INSTALL ALL CONTROL COMPONENTS AND ACCESSORIES SO THAT THEY WILL NOT BE SUPPORT AND INSTALL ALL CONTROL COMPONENTS AND ACCESSORIES SO THAT THEY WILL NOT BE SUPPORT AND INSTALL ALL CONTROL COMPONENTS AND ACCESSORIES SO THAT THEY WILL NOT BE AND INSTALL ALL CONTROL COMPONENTS AND ACCESSORIES SO THAT THEY WILL NOT BE AND INSTALL ALL CONTROL COMPONENTS AND ACCESSORIES SO THAT THEY WILL NOT BE INSTALL ALL CONTROL COMPONENTS AND ACCESSORIES SO THAT THEY WILL NOT BE INSTALL ALL CONTROL COMPONENTS AND ACCESSORIES SO THAT THEY WILL NOT BE ALL CONTROL COMPONENTS AND ACCESSORIES SO THAT THEY WILL NOT BE ALL CONTROL COMPONENTS AND ACCESSORIES SO THAT THEY WILL NOT BE CONTROL COMPONENTS AND ACCESSORIES SO THAT THEY WILL NOT BE CONTROL COMPONENTS AND ACCESSORIES SO THAT THEY WILL NOT BE COMPONENTS AND ACCESSORIES SO THAT THEY WILL NOT BE COMPONENTS AND ACCESSORIES SO THAT THEY WILL NOT BE AND ACCESSORIES SO THAT THEY WILL NOT BE AND ACCESSORIES SO THAT THEY WILL NOT BE ACCESSORIES SO THAT THEY WILL NOT BE ACCESSORIES SO THAT THEY WILL NOT BE SO THAT THEY WILL NOT BE SO THAT THEY WILL NOT BE THAT THEY WILL NOT BE THAT THEY WILL NOT BE THEY WILL NOT BE THEY WILL NOT BE WILL NOT BE WILL NOT BE NOT BE NOT BE BE BE SUBJECT TO VIBRATION, EXCESSIVE TEMPERATURES, DIRT, MOISTURE OR OTHER HARMFUL CONDITIONS TO VIBRATION, EXCESSIVE TEMPERATURES, DIRT, MOISTURE OR OTHER HARMFUL CONDITIONS TO VIBRATION, EXCESSIVE TEMPERATURES, DIRT, MOISTURE OR OTHER HARMFUL CONDITIONS VIBRATION, EXCESSIVE TEMPERATURES, DIRT, MOISTURE OR OTHER HARMFUL CONDITIONS VIBRATION, EXCESSIVE TEMPERATURES, DIRT, MOISTURE OR OTHER HARMFUL CONDITIONS EXCESSIVE TEMPERATURES, DIRT, MOISTURE OR OTHER HARMFUL CONDITIONS EXCESSIVE TEMPERATURES, DIRT, MOISTURE OR OTHER HARMFUL CONDITIONS TEMPERATURES, DIRT, MOISTURE OR OTHER HARMFUL CONDITIONS TEMPERATURES, DIRT, MOISTURE OR OTHER HARMFUL CONDITIONS DIRT, MOISTURE OR OTHER HARMFUL CONDITIONS DIRT, MOISTURE OR OTHER HARMFUL CONDITIONS MOISTURE OR OTHER HARMFUL CONDITIONS MOISTURE OR OTHER HARMFUL CONDITIONS OR OTHER HARMFUL CONDITIONS OR OTHER HARMFUL CONDITIONS OTHER HARMFUL CONDITIONS OTHER HARMFUL CONDITIONS HARMFUL CONDITIONS HARMFUL CONDITIONS CONDITIONS CONDITIONS BEYOND THEIR RATED LIMITATIONS.

AutoCAD SHX Text

5.PROVIDE ALL NECESSARY RELAYS, SWITCHES, LINKAGES, CONTROL DEVICES, ACCESSORIES AND CONNECTIONS PROVIDE ALL NECESSARY RELAYS, SWITCHES, LINKAGES, CONTROL DEVICES, ACCESSORIES AND CONNECTIONS ALL NECESSARY RELAYS, SWITCHES, LINKAGES, CONTROL DEVICES, ACCESSORIES AND CONNECTIONS ALL NECESSARY RELAYS, SWITCHES, LINKAGES, CONTROL DEVICES, ACCESSORIES AND CONNECTIONS NECESSARY RELAYS, SWITCHES, LINKAGES, CONTROL DEVICES, ACCESSORIES AND CONNECTIONS NECESSARY RELAYS, SWITCHES, LINKAGES, CONTROL DEVICES, ACCESSORIES AND CONNECTIONS RELAYS, SWITCHES, LINKAGES, CONTROL DEVICES, ACCESSORIES AND CONNECTIONS RELAYS, SWITCHES, LINKAGES, CONTROL DEVICES, ACCESSORIES AND CONNECTIONS SWITCHES, LINKAGES, CONTROL DEVICES, ACCESSORIES AND CONNECTIONS SWITCHES, LINKAGES, CONTROL DEVICES, ACCESSORIES AND CONNECTIONS LINKAGES, CONTROL DEVICES, ACCESSORIES AND CONNECTIONS LINKAGES, CONTROL DEVICES, ACCESSORIES AND CONNECTIONS CONTROL DEVICES, ACCESSORIES AND CONNECTIONS CONTROL DEVICES, ACCESSORIES AND CONNECTIONS DEVICES, ACCESSORIES AND CONNECTIONS DEVICES, ACCESSORIES AND CONNECTIONS ACCESSORIES AND CONNECTIONS ACCESSORIES AND CONNECTIONS AND CONNECTIONS AND CONNECTIONS CONNECTIONS CONNECTIONS AS REQUIRED FOR A COMPLETE AND OPERATIONAL CONTROL SYSTEM AS SPECIFIED HEREIN AND SHOWN.

AutoCAD SHX Text

F.OWNER INSTRUCTION AND TRAINING: PROVIDE A MINIMUM OF FOUR (4) HOURS OF ON-SITE INSTRUCTION AND OWNER INSTRUCTION AND TRAINING: PROVIDE A MINIMUM OF FOUR (4) HOURS OF ON-SITE INSTRUCTION AND INSTRUCTION AND TRAINING: PROVIDE A MINIMUM OF FOUR (4) HOURS OF ON-SITE INSTRUCTION AND INSTRUCTION AND TRAINING: PROVIDE A MINIMUM OF FOUR (4) HOURS OF ON-SITE INSTRUCTION AND AND TRAINING: PROVIDE A MINIMUM OF FOUR (4) HOURS OF ON-SITE INSTRUCTION AND AND TRAINING: PROVIDE A MINIMUM OF FOUR (4) HOURS OF ON-SITE INSTRUCTION AND TRAINING: PROVIDE A MINIMUM OF FOUR (4) HOURS OF ON-SITE INSTRUCTION AND TRAINING: PROVIDE A MINIMUM OF FOUR (4) HOURS OF ON-SITE INSTRUCTION AND PROVIDE A MINIMUM OF FOUR (4) HOURS OF ON-SITE INSTRUCTION AND PROVIDE A MINIMUM OF FOUR (4) HOURS OF ON-SITE INSTRUCTION AND PROVIDE A MINIMUM OF FOUR (4) HOURS OF ON-SITE INSTRUCTION AND A MINIMUM OF FOUR (4) HOURS OF ON-SITE INSTRUCTION AND A MINIMUM OF FOUR (4) HOURS OF ON-SITE INSTRUCTION AND MINIMUM OF FOUR (4) HOURS OF ON-SITE INSTRUCTION AND MINIMUM OF FOUR (4) HOURS OF ON-SITE INSTRUCTION AND OF FOUR (4) HOURS OF ON-SITE INSTRUCTION AND OF FOUR (4) HOURS OF ON-SITE INSTRUCTION AND FOUR (4) HOURS OF ON-SITE INSTRUCTION AND FOUR (4) HOURS OF ON-SITE INSTRUCTION AND (4) HOURS OF ON-SITE INSTRUCTION AND (4) HOURS OF ON-SITE INSTRUCTION AND HOURS OF ON-SITE INSTRUCTION AND HOURS OF ON-SITE INSTRUCTION AND OF ON-SITE INSTRUCTION AND OF ON-SITE INSTRUCTION AND ON-SITE INSTRUCTION AND ON-SITE INSTRUCTION AND INSTRUCTION AND INSTRUCTION AND AND AND TRAINING TO THE OWNER ON THE OPERATION OF THE CONTROL SYSTEMS FOR THE INITIAL INSTALLATION. TO THE OWNER ON THE OPERATION OF THE CONTROL SYSTEMS FOR THE INITIAL INSTALLATION. TO THE OWNER ON THE OPERATION OF THE CONTROL SYSTEMS FOR THE INITIAL INSTALLATION. THE OWNER ON THE OPERATION OF THE CONTROL SYSTEMS FOR THE INITIAL INSTALLATION. THE OWNER ON THE OPERATION OF THE CONTROL SYSTEMS FOR THE INITIAL INSTALLATION. OWNER ON THE OPERATION OF THE CONTROL SYSTEMS FOR THE INITIAL INSTALLATION. OWNER ON THE OPERATION OF THE CONTROL SYSTEMS FOR THE INITIAL INSTALLATION. ON THE OPERATION OF THE CONTROL SYSTEMS FOR THE INITIAL INSTALLATION. ON THE OPERATION OF THE CONTROL SYSTEMS FOR THE INITIAL INSTALLATION. THE OPERATION OF THE CONTROL SYSTEMS FOR THE INITIAL INSTALLATION. THE OPERATION OF THE CONTROL SYSTEMS FOR THE INITIAL INSTALLATION. OPERATION OF THE CONTROL SYSTEMS FOR THE INITIAL INSTALLATION. OPERATION OF THE CONTROL SYSTEMS FOR THE INITIAL INSTALLATION. OF THE CONTROL SYSTEMS FOR THE INITIAL INSTALLATION. OF THE CONTROL SYSTEMS FOR THE INITIAL INSTALLATION. THE CONTROL SYSTEMS FOR THE INITIAL INSTALLATION. THE CONTROL SYSTEMS FOR THE INITIAL INSTALLATION. CONTROL SYSTEMS FOR THE INITIAL INSTALLATION. CONTROL SYSTEMS FOR THE INITIAL INSTALLATION. SYSTEMS FOR THE INITIAL INSTALLATION. SYSTEMS FOR THE INITIAL INSTALLATION. FOR THE INITIAL INSTALLATION. FOR THE INITIAL INSTALLATION. THE INITIAL INSTALLATION. THE INITIAL INSTALLATION. INITIAL INSTALLATION. INITIAL INSTALLATION. INSTALLATION. INSTALLATION. INSTRUCTION AND TRAINING SHALL BE PERFORMED BY A COMPETENT CONTRACTOR REPRESENTATIVE FAMILIAR AND TRAINING SHALL BE PERFORMED BY A COMPETENT CONTRACTOR REPRESENTATIVE FAMILIAR AND TRAINING SHALL BE PERFORMED BY A COMPETENT CONTRACTOR REPRESENTATIVE FAMILIAR TRAINING SHALL BE PERFORMED BY A COMPETENT CONTRACTOR REPRESENTATIVE FAMILIAR TRAINING SHALL BE PERFORMED BY A COMPETENT CONTRACTOR REPRESENTATIVE FAMILIAR SHALL BE PERFORMED BY A COMPETENT CONTRACTOR REPRESENTATIVE FAMILIAR SHALL BE PERFORMED BY A COMPETENT CONTRACTOR REPRESENTATIVE FAMILIAR BE PERFORMED BY A COMPETENT CONTRACTOR REPRESENTATIVE FAMILIAR BE PERFORMED BY A COMPETENT CONTRACTOR REPRESENTATIVE FAMILIAR PERFORMED BY A COMPETENT CONTRACTOR REPRESENTATIVE FAMILIAR PERFORMED BY A COMPETENT CONTRACTOR REPRESENTATIVE FAMILIAR BY A COMPETENT CONTRACTOR REPRESENTATIVE FAMILIAR BY A COMPETENT CONTRACTOR REPRESENTATIVE FAMILIAR A COMPETENT CONTRACTOR REPRESENTATIVE FAMILIAR A COMPETENT CONTRACTOR REPRESENTATIVE FAMILIAR COMPETENT CONTRACTOR REPRESENTATIVE FAMILIAR COMPETENT CONTRACTOR REPRESENTATIVE FAMILIAR CONTRACTOR REPRESENTATIVE FAMILIAR CONTRACTOR REPRESENTATIVE FAMILIAR REPRESENTATIVE FAMILIAR REPRESENTATIVE FAMILIAR FAMILIAR FAMILIAR WITH THE CONTROL SYSTEMS OPERATION, MAINTENANCE AND CALIBRATION

AutoCAD SHX Text

G.CALIBRATION AND START-UP: AFTER INSTALLATION AND CONNECTION OF CONTROL COMPONENTS, TEST, CALIBRATION AND START-UP: AFTER INSTALLATION AND CONNECTION OF CONTROL COMPONENTS, TEST, AND START-UP: AFTER INSTALLATION AND CONNECTION OF CONTROL COMPONENTS, TEST, AND START-UP: AFTER INSTALLATION AND CONNECTION OF CONTROL COMPONENTS, TEST, START-UP: AFTER INSTALLATION AND CONNECTION OF CONTROL COMPONENTS, TEST, START-UP: AFTER INSTALLATION AND CONNECTION OF CONTROL COMPONENTS, TEST, AFTER INSTALLATION AND CONNECTION OF CONTROL COMPONENTS, TEST, AFTER INSTALLATION AND CONNECTION OF CONTROL COMPONENTS, TEST, AFTER INSTALLATION AND CONNECTION OF CONTROL COMPONENTS, TEST, INSTALLATION AND CONNECTION OF CONTROL COMPONENTS, TEST, INSTALLATION AND CONNECTION OF CONTROL COMPONENTS, TEST, AND CONNECTION OF CONTROL COMPONENTS, TEST, AND CONNECTION OF CONTROL COMPONENTS, TEST, CONNECTION OF CONTROL COMPONENTS, TEST, CONNECTION OF CONTROL COMPONENTS, TEST, OF CONTROL COMPONENTS, TEST, OF CONTROL COMPONENTS, TEST, CONTROL COMPONENTS, TEST, CONTROL COMPONENTS, TEST, COMPONENTS, TEST, COMPONENTS, TEST, TEST, TEST, ADJUST AND RE-ADJUST AS REQUIRED ALL CONTROL COMPONENTS IN TERMS OF FUNCTION, DESIGN, SYSTEMS AND RE-ADJUST AS REQUIRED ALL CONTROL COMPONENTS IN TERMS OF FUNCTION, DESIGN, SYSTEMS AND RE-ADJUST AS REQUIRED ALL CONTROL COMPONENTS IN TERMS OF FUNCTION, DESIGN, SYSTEMS RE-ADJUST AS REQUIRED ALL CONTROL COMPONENTS IN TERMS OF FUNCTION, DESIGN, SYSTEMS RE-ADJUST AS REQUIRED ALL CONTROL COMPONENTS IN TERMS OF FUNCTION, DESIGN, SYSTEMS AS REQUIRED ALL CONTROL COMPONENTS IN TERMS OF FUNCTION, DESIGN, SYSTEMS AS REQUIRED ALL CONTROL COMPONENTS IN TERMS OF FUNCTION, DESIGN, SYSTEMS REQUIRED ALL CONTROL COMPONENTS IN TERMS OF FUNCTION, DESIGN, SYSTEMS REQUIRED ALL CONTROL COMPONENTS IN TERMS OF FUNCTION, DESIGN, SYSTEMS ALL CONTROL COMPONENTS IN TERMS OF FUNCTION, DESIGN, SYSTEMS ALL CONTROL COMPONENTS IN TERMS OF FUNCTION, DESIGN, SYSTEMS CONTROL COMPONENTS IN TERMS OF FUNCTION, DESIGN, SYSTEMS CONTROL COMPONENTS IN TERMS OF FUNCTION, DESIGN, SYSTEMS COMPONENTS IN TERMS OF FUNCTION, DESIGN, SYSTEMS COMPONENTS IN TERMS OF FUNCTION, DESIGN, SYSTEMS IN TERMS OF FUNCTION, DESIGN, SYSTEMS IN TERMS OF FUNCTION, DESIGN, SYSTEMS TERMS OF FUNCTION, DESIGN, SYSTEMS TERMS OF FUNCTION, DESIGN, SYSTEMS OF FUNCTION, DESIGN, SYSTEMS OF FUNCTION, DESIGN, SYSTEMS FUNCTION, DESIGN, SYSTEMS FUNCTION, DESIGN, SYSTEMS DESIGN, SYSTEMS DESIGN, SYSTEMS SYSTEMS SYSTEMS BALANCE AND PERFORMANCE. MAKE SYSTEMS READY FOR ENVIRONMENTAL EQUIPMENT ACCEPTANCE TESTS

AutoCAD SHX Text

H.ACCEPTANCE PROCEDURE: UPON SUCCESSFUL COMPLETION OF START-UP AND RECALIBRATION AS INDICATED ACCEPTANCE PROCEDURE: UPON SUCCESSFUL COMPLETION OF START-UP AND RECALIBRATION AS INDICATED PROCEDURE: UPON SUCCESSFUL COMPLETION OF START-UP AND RECALIBRATION AS INDICATED PROCEDURE: UPON SUCCESSFUL COMPLETION OF START-UP AND RECALIBRATION AS INDICATED UPON SUCCESSFUL COMPLETION OF START-UP AND RECALIBRATION AS INDICATED UPON SUCCESSFUL COMPLETION OF START-UP AND RECALIBRATION AS INDICATED UPON SUCCESSFUL COMPLETION OF START-UP AND RECALIBRATION AS INDICATED SUCCESSFUL COMPLETION OF START-UP AND RECALIBRATION AS INDICATED SUCCESSFUL COMPLETION OF START-UP AND RECALIBRATION AS INDICATED COMPLETION OF START-UP AND RECALIBRATION AS INDICATED COMPLETION OF START-UP AND RECALIBRATION AS INDICATED OF START-UP AND RECALIBRATION AS INDICATED OF START-UP AND RECALIBRATION AS INDICATED START-UP AND RECALIBRATION AS INDICATED START-UP AND RECALIBRATION AS INDICATED AND RECALIBRATION AS INDICATED AND RECALIBRATION AS INDICATED RECALIBRATION AS INDICATED RECALIBRATION AS INDICATED AS INDICATED AS INDICATED INDICATED INDICATED IN THIS SECTION, THE ARCHITECT SHALL BE REQUESTED IN WRITING TO INSPECT THE SATISFACTORY OPERATION THIS SECTION, THE ARCHITECT SHALL BE REQUESTED IN WRITING TO INSPECT THE SATISFACTORY OPERATION THIS SECTION, THE ARCHITECT SHALL BE REQUESTED IN WRITING TO INSPECT THE SATISFACTORY OPERATION SECTION, THE ARCHITECT SHALL BE REQUESTED IN WRITING TO INSPECT THE SATISFACTORY OPERATION SECTION, THE ARCHITECT SHALL BE REQUESTED IN WRITING TO INSPECT THE SATISFACTORY OPERATION THE ARCHITECT SHALL BE REQUESTED IN WRITING TO INSPECT THE SATISFACTORY OPERATION THE ARCHITECT SHALL BE REQUESTED IN WRITING TO INSPECT THE SATISFACTORY OPERATION ARCHITECT SHALL BE REQUESTED IN WRITING TO INSPECT THE SATISFACTORY OPERATION ARCHITECT SHALL BE REQUESTED IN WRITING TO INSPECT THE SATISFACTORY OPERATION SHALL BE REQUESTED IN WRITING TO INSPECT THE SATISFACTORY OPERATION SHALL BE REQUESTED IN WRITING TO INSPECT THE SATISFACTORY OPERATION BE REQUESTED IN WRITING TO INSPECT THE SATISFACTORY OPERATION BE REQUESTED IN WRITING TO INSPECT THE SATISFACTORY OPERATION REQUESTED IN WRITING TO INSPECT THE SATISFACTORY OPERATION REQUESTED IN WRITING TO INSPECT THE SATISFACTORY OPERATION IN WRITING TO INSPECT THE SATISFACTORY OPERATION IN WRITING TO INSPECT THE SATISFACTORY OPERATION WRITING TO INSPECT THE SATISFACTORY OPERATION WRITING TO INSPECT THE SATISFACTORY OPERATION TO INSPECT THE SATISFACTORY OPERATION TO INSPECT THE SATISFACTORY OPERATION INSPECT THE SATISFACTORY OPERATION INSPECT THE SATISFACTORY OPERATION THE SATISFACTORY OPERATION THE SATISFACTORY OPERATION SATISFACTORY OPERATION SATISFACTORY OPERATION OPERATION OPERATION OF THE CONTROL SYSTEMS. AFTER CORRECTING ALL ITEMS APPEARING ON THE PUNCH LIST, MAKE A SECOND THE CONTROL SYSTEMS. AFTER CORRECTING ALL ITEMS APPEARING ON THE PUNCH LIST, MAKE A SECOND THE CONTROL SYSTEMS. AFTER CORRECTING ALL ITEMS APPEARING ON THE PUNCH LIST, MAKE A SECOND CONTROL SYSTEMS. AFTER CORRECTING ALL ITEMS APPEARING ON THE PUNCH LIST, MAKE A SECOND CONTROL SYSTEMS. AFTER CORRECTING ALL ITEMS APPEARING ON THE PUNCH LIST, MAKE A SECOND SYSTEMS. AFTER CORRECTING ALL ITEMS APPEARING ON THE PUNCH LIST, MAKE A SECOND SYSTEMS. AFTER CORRECTING ALL ITEMS APPEARING ON THE PUNCH LIST, MAKE A SECOND AFTER CORRECTING ALL ITEMS APPEARING ON THE PUNCH LIST, MAKE A SECOND AFTER CORRECTING ALL ITEMS APPEARING ON THE PUNCH LIST, MAKE A SECOND AFTER CORRECTING ALL ITEMS APPEARING ON THE PUNCH LIST, MAKE A SECOND CORRECTING ALL ITEMS APPEARING ON THE PUNCH LIST, MAKE A SECOND CORRECTING ALL ITEMS APPEARING ON THE PUNCH LIST, MAKE A SECOND ALL ITEMS APPEARING ON THE PUNCH LIST, MAKE A SECOND ALL ITEMS APPEARING ON THE PUNCH LIST, MAKE A SECOND ITEMS APPEARING ON THE PUNCH LIST, MAKE A SECOND ITEMS APPEARING ON THE PUNCH LIST, MAKE A SECOND APPEARING ON THE PUNCH LIST, MAKE A SECOND APPEARING ON THE PUNCH LIST, MAKE A SECOND ON THE PUNCH LIST, MAKE A SECOND ON THE PUNCH LIST, MAKE A SECOND THE PUNCH LIST, MAKE A SECOND THE PUNCH LIST, MAKE A SECOND PUNCH LIST, MAKE A SECOND PUNCH LIST, MAKE A SECOND LIST, MAKE A SECOND LIST, MAKE A SECOND MAKE A SECOND MAKE A SECOND A SECOND A SECOND SECOND SECOND WRITTEN REQUEST TO THE OWNER AND ARCHITECT FOR INSPECTION AND APPROVAL. AFTER ALL ITEMS ON THE REQUEST TO THE OWNER AND ARCHITECT FOR INSPECTION AND APPROVAL. AFTER ALL ITEMS ON THE REQUEST TO THE OWNER AND ARCHITECT FOR INSPECTION AND APPROVAL. AFTER ALL ITEMS ON THE TO THE OWNER AND ARCHITECT FOR INSPECTION AND APPROVAL. AFTER ALL ITEMS ON THE TO THE OWNER AND ARCHITECT FOR INSPECTION AND APPROVAL. AFTER ALL ITEMS ON THE THE OWNER AND ARCHITECT FOR INSPECTION AND APPROVAL. AFTER ALL ITEMS ON THE THE OWNER AND ARCHITECT FOR INSPECTION AND APPROVAL. AFTER ALL ITEMS ON THE OWNER AND ARCHITECT FOR INSPECTION AND APPROVAL. AFTER ALL ITEMS ON THE OWNER AND ARCHITECT FOR INSPECTION AND APPROVAL. AFTER ALL ITEMS ON THE AND ARCHITECT FOR INSPECTION AND APPROVAL. AFTER ALL ITEMS ON THE AND ARCHITECT FOR INSPECTION AND APPROVAL. AFTER ALL ITEMS ON THE ARCHITECT FOR INSPECTION AND APPROVAL. AFTER ALL ITEMS ON THE ARCHITECT FOR INSPECTION AND APPROVAL. AFTER ALL ITEMS ON THE FOR INSPECTION AND APPROVAL. AFTER ALL ITEMS ON THE FOR INSPECTION AND APPROVAL. AFTER ALL ITEMS ON THE INSPECTION AND APPROVAL. AFTER ALL ITEMS ON THE INSPECTION AND APPROVAL. AFTER ALL ITEMS ON THE AND APPROVAL. AFTER ALL ITEMS ON THE AND APPROVAL. AFTER ALL ITEMS ON THE APPROVAL. AFTER ALL ITEMS ON THE APPROVAL. AFTER ALL ITEMS ON THE AFTER ALL ITEMS ON THE AFTER ALL ITEMS ON THE AFTER ALL ITEMS ON THE ALL ITEMS ON THE ALL ITEMS ON THE ITEMS ON THE ITEMS ON THE ON THE ON THE THE THE PUNCH LIST ARE CORRECTED AND FORMAL APPROVAL OF THE CONTROL SYSTEMS IS PROVIDED BY THE LIST ARE CORRECTED AND FORMAL APPROVAL OF THE CONTROL SYSTEMS IS PROVIDED BY THE LIST ARE CORRECTED AND FORMAL APPROVAL OF THE CONTROL SYSTEMS IS PROVIDED BY THE ARE CORRECTED AND FORMAL APPROVAL OF THE CONTROL SYSTEMS IS PROVIDED BY THE ARE CORRECTED AND FORMAL APPROVAL OF THE CONTROL SYSTEMS IS PROVIDED BY THE CORRECTED AND FORMAL APPROVAL OF THE CONTROL SYSTEMS IS PROVIDED BY THE CORRECTED AND FORMAL APPROVAL OF THE CONTROL SYSTEMS IS PROVIDED BY THE AND FORMAL APPROVAL OF THE CONTROL SYSTEMS IS PROVIDED BY THE AND FORMAL APPROVAL OF THE CONTROL SYSTEMS IS PROVIDED BY THE FORMAL APPROVAL OF THE CONTROL SYSTEMS IS PROVIDED BY THE FORMAL APPROVAL OF THE CONTROL SYSTEMS IS PROVIDED BY THE APPROVAL OF THE CONTROL SYSTEMS IS PROVIDED BY THE APPROVAL OF THE CONTROL SYSTEMS IS PROVIDED BY THE OF THE CONTROL SYSTEMS IS PROVIDED BY THE OF THE CONTROL SYSTEMS IS PROVIDED BY THE THE CONTROL SYSTEMS IS PROVIDED BY THE THE CONTROL SYSTEMS IS PROVIDED BY THE CONTROL SYSTEMS IS PROVIDED BY THE CONTROL SYSTEMS IS PROVIDED BY THE SYSTEMS IS PROVIDED BY THE SYSTEMS IS PROVIDED BY THE IS PROVIDED BY THE IS PROVIDED BY THE PROVIDED BY THE PROVIDED BY THE BY THE BY THE THE THE ARCHITECT, THE CONTRACTOR SHALL INDICATE TO THE OWNER IN WRITING THE COMMENCEMENT OF THE THE CONTRACTOR SHALL INDICATE TO THE OWNER IN WRITING THE COMMENCEMENT OF THE THE CONTRACTOR SHALL INDICATE TO THE OWNER IN WRITING THE COMMENCEMENT OF THE CONTRACTOR SHALL INDICATE TO THE OWNER IN WRITING THE COMMENCEMENT OF THE CONTRACTOR SHALL INDICATE TO THE OWNER IN WRITING THE COMMENCEMENT OF THE SHALL INDICATE TO THE OWNER IN WRITING THE COMMENCEMENT OF THE SHALL INDICATE TO THE OWNER IN WRITING THE COMMENCEMENT OF THE INDICATE TO THE OWNER IN WRITING THE COMMENCEMENT OF THE INDICATE TO THE OWNER IN WRITING THE COMMENCEMENT OF THE TO THE OWNER IN WRITING THE COMMENCEMENT OF THE TO THE OWNER IN WRITING THE COMMENCEMENT OF THE THE OWNER IN WRITING THE COMMENCEMENT OF THE THE OWNER IN WRITING THE COMMENCEMENT OF THE OWNER IN WRITING THE COMMENCEMENT OF THE OWNER IN WRITING THE COMMENCEMENT OF THE IN WRITING THE COMMENCEMENT OF THE IN WRITING THE COMMENCEMENT OF THE WRITING THE COMMENCEMENT OF THE WRITING THE COMMENCEMENT OF THE THE COMMENCEMENT OF THE THE COMMENCEMENT OF THE COMMENCEMENT OF THE COMMENCEMENT OF THE OF THE OF THE THE THE WARRANTY PERIOD.

AutoCAD SHX Text

.

AutoCAD SHX Text

\\pba.local\projects\2018\2018-0451-00\CAD\2018-0451-M0-SPC.dwg, M003, 3/11/2019 12:20:16 PM, Justin J. Bush, Peter Basso Associates Inc., M003, 3/11/2019 12:20:16 PM, Justin J. Bush, Peter Basso Associates Inc.M003, 3/11/2019 12:20:16 PM, Justin J. Bush, Peter Basso Associates Inc., 3/11/2019 12:20:16 PM, Justin J. Bush, Peter Basso Associates Inc.3/11/2019 12:20:16 PM, Justin J. Bush, Peter Basso Associates Inc., Justin J. Bush, Peter Basso Associates Inc.Justin J. Bush, Peter Basso Associates Inc., Peter Basso Associates Inc.

AutoCAD SHX Text

68182

AutoCAD SHX Text

No.

AutoCAD SHX Text

CHRISTOPHER

AutoCAD SHX Text

FRANTZ

AutoCAD SHX Text

ENGINEER

AutoCAD SHX Text

AARON

OPEN OFFICE

104

OFFICE

154

RECEPTION

152

STOR.

106

TOILET

153

CORRIDOR

113

MENS

150

WOMENS

151

VESTIBULE

101

OFFICE

155

OFFICE

156

ROOM 5

137

ROOM 4

138

ROOM 3

139

ROOM 2

140

ROOM 1

141

ROOM 6

133

ROOM 7

129

GYM

109

STOR.

108

OFFICE

110

MALE LOCKERS

118

MALE SHOWER

117

LAUNDRY

116

FEMALE SHOWER

115

MENS RESTROOM

111

WOMENS

RESTROOM

112

FEMALE

LOCKERS

114

SOUVINEERS

121

STOR.

122

MECH. / ELEC.

123

LAWN EQUIP.

124

STOR.

126

JAN.

127

STOR.

131

OFFICE

130OFFICE

132

STOR.

134

STOR.

135

KITCHEN

148

STOR.

149

BREAK

105

LOBBY

102

PUBLIC COUNTER

103

WERTZ ROOM

107

VESTIBULE

119

OFFICE

120

STORAGE

125

ROOM 8

128

CORRIDOR

136

UP

A201

2

NEW SIDEWALK

NEW DOOR STOOP

NEW STOOP

NEW STOOP

A401

1

A411

4

A411

A411

9

A411

10

A412

4

2

5

1


ANDERSON,

Phone 586 726 1234 Fax 586 726 8780


Michigan 48315

www.aewinc.com


Fax: 248-879-0007


Tel: 248-879-5666






SHEET TITLE:


SCALE:

PRELIMINARY


PROJECT NO.

SHEET NO.

CLIENT:

PROJECT NAME:

CONSTRUCTION RECORD

DATE:



















0132-1007


SHELBY TOWNSHIP

02/28/2019



CallR


BID ISSUE02/28/2019


..

FIRST FLOORPLUMBING AND

FIRE PROTECTIONPLAN

M201

1/8"=1'-0"


AutoCAD SHX Text

SK-1

AutoCAD SHX Text

SK-2

AutoCAD SHX Text

EWC-1

AutoCAD SHX Text

GD-1

AutoCAD SHX Text

1

AutoCAD SHX Text

1

AutoCAD SHX Text

1

AutoCAD SHX Text

1

AutoCAD SHX Text

2

AutoCAD SHX Text

2

AutoCAD SHX Text

2

AutoCAD SHX Text

2

AutoCAD SHX Text

2

AutoCAD SHX Text

2

AutoCAD SHX Text

3

AutoCAD SHX Text

(E) VTR

AutoCAD SHX Text

3

AutoCAD SHX Text

(E) VTR

AutoCAD SHX Text

3

AutoCAD SHX Text

(E) VTR

AutoCAD SHX Text

3

AutoCAD SHX Text

(E) VTR

AutoCAD SHX Text

3

AutoCAD SHX Text

(E) VTR

AutoCAD SHX Text

3

AutoCAD SHX Text

(E) VTR

AutoCAD SHX Text

RTU

AutoCAD SHX Text

4

AutoCAD SHX Text

RTU

AutoCAD SHX Text

6

AutoCAD SHX Text

4

AutoCAD SHX Text

4

AutoCAD SHX Text

(E) EWC

AutoCAD SHX Text

(E) EWC

AutoCAD SHX Text

3

AutoCAD SHX Text

(E) VTR

AutoCAD SHX Text

3

AutoCAD SHX Text

(E) VTR

AutoCAD SHX Text

1

AutoCAD SHX Text

3

AutoCAD SHX Text

(E) VTR

AutoCAD SHX Text

5

AutoCAD SHX Text

SOLIDS INTERCEPTOR WITHIN CABINET

AutoCAD SHX Text

2

AutoCAD SHX Text

5

AutoCAD SHX Text

5

AutoCAD SHX Text

ST

AutoCAD SHX Text

ST

AutoCAD SHX Text

10

AutoCAD SHX Text

8

AutoCAD SHX Text

C.O.

AutoCAD SHX Text

6

AutoCAD SHX Text

1. THESE DRAWINGS ARE DIAGRAMMATIC, AND REPRESENT THE GENERAL INTENT AND THESE DRAWINGS ARE DIAGRAMMATIC, AND REPRESENT THE GENERAL INTENT AND ARRANGEMENT OF SYSTEMS. THEY ARE NOT TO BE CONSIDERED FABRICATION/COORDINATION/SHOP DRAWINGS. COORDINATION WITH OTHER TRADES IS REQUIRED. PROVIDE THE ADDITIONAL FITTINGS AND OFFSETS THAT WILL BE REQUIRED TO COMPLETE EACH SYSTEM AND TO AVOID INTERFERENCES WITH ALL OTHER SYSTEMS INCLUDING THE STRUCTURE, SHEET METAL, OTHER PIPING SYSTEMS, ELECTRICAL CONDUITS, BUS DUCTS, CABLE TRAY, LIGHT FIXTURES, ETC. AND/OR OTHER SPACE CONSTRAINTS. 2. INSTALL SYSTEMS SUCH THAT REQUIRED CLEARANCE AND SERVICE ACCESS SPACE INSTALL SYSTEMS SUCH THAT REQUIRED CLEARANCE AND SERVICE ACCESS SPACE IS PROVIDED AROUND ALL MECHANICAL AND ELECTRICAL EQUIPMENT, AND AROUND ANY COMPONENTS WHICH REQUIRE SERVICE ACCESS. 3. NO SPRINKLER PIPING SHALL BE ROUTED THROUGH ELECTRICAL EQUIPMENT ROOMS, NO SPRINKLER PIPING SHALL BE ROUTED THROUGH ELECTRICAL EQUIPMENT ROOMS, TELECOMMUNICATION EQUIPMENT ROOMS, ELEVATOR EQUIPMENT ROOMS OR SIMILAR ROOMS. ONLY SPRINKLER PIPING SERVING SPRINKLERS HEADS IN THOSE ROOMS SHALL BE ALLOWED. 4. PIPING SHALL NOT BE INSTALLED ABOVE ELECTRICAL TRANSFORMERS, PIPING SHALL NOT BE INSTALLED ABOVE ELECTRICAL TRANSFORMERS, SWITCHBOARDS, PANELBOARDS OR MOTOR CONTROL CENTERS. 5. MINIMUM RUN-OUT PIPE SIZE TO SPRINKLER HEADS SHALL BE 1". MINIMUM RUN-OUT PIPE SIZE TO SPRINKLER HEADS SHALL BE 1". 6. PROVIDE AN AUTOMATIC WET PIPE SPRINKLER SYSTEM IN ACCORDANCE WITH NFPA PROVIDE AN AUTOMATIC WET PIPE SPRINKLER SYSTEM IN ACCORDANCE WITH NFPA 13 LIGHT HAZARD CLASSIFICATION. HYDRAULIC CALCULATIONS SHALL BE BASED ON DENSITY OF 0.10 GPM/SQ FT. OVER THE MOST REMOTE 1500 SQ. FT.

AutoCAD SHX Text

%%UFIRE PROTECTION GENERAL NOTES:

AutoCAD SHX Text

%%UCONSTRUCTION KEY NOTES:

AutoCAD SHX Text

#

AutoCAD SHX Text

1. MODIFY EXISTING SPRINKLER BRANCH PIPING AND SPRINKLERS AS REQUIRED TO MODIFY EXISTING SPRINKLER BRANCH PIPING AND SPRINKLERS AS REQUIRED TO FACILITATE ARCHITECTURAL WALL AND CEILING REVISIONS. 2. PROVIDE ASSE 1070 TEMPERING VALVE FOR LAVATORY OR SINK. PROVIDE ASSE 1070 TEMPERING VALVE FOR LAVATORY OR SINK. 3. EXTEND EXISTING 3" VTR 12 INCHES ABOVE ELEVATION OF NEW FINISHED ROOF. EXTEND EXISTING 3" VTR 12 INCHES ABOVE ELEVATION OF NEW FINISHED ROOF. 4. MODIFY EXISTING GAS PIPING ON ROOF TO SERVE NEW ROOFTOP UNIT AND MODIFY EXISTING GAS PIPING ON ROOF TO SERVE NEW ROOFTOP UNIT AND RECONNECT. 5. REUSE EXISTING ROUGH-INS AND PROVIDE NEW SUPPLIES AND STOPS. REUSE EXISTING ROUGH-INS AND PROVIDE NEW SUPPLIES AND STOPS. 6. INSTALL CLEAN-OUT TO GRADE ON EXISTING 10" STORM MAIN. FIELD VERIFY EXACT INSTALL CLEAN-OUT TO GRADE ON EXISTING 10" STORM MAIN. FIELD VERIFY EXACT LOCATION.

AutoCAD SHX Text

1. THESE DRAWINGS ARE DIAGRAMMATIC, AND REPRESENT THE GENERAL INTENT AND THESE DRAWINGS ARE DIAGRAMMATIC, AND REPRESENT THE GENERAL INTENT AND ARRANGEMENT OF SYSTEMS. THEY ARE NOT TO BE CONSIDERED FABRICATION/COORDINATION/SHOP DRAWINGS. COORDINATION WITH OTHER TRADES IS REQUIRED. PROVIDE THE ADDITIONAL FITTINGS AND OFFSETS THAT WILL BE REQUIRED TO COMPLETE EACH SYSTEM AND TO AVOID INTERFERENCES WITH ALL OTHER SYSTEMS INCLUDING THE STRUCTURE, SHEET METAL, OTHER PIPING SYSTEMS, ELECTRICAL CONDUITS, BUS DUCTS, CABLE TRAY, LIGHT FIXTURES, ETC. AND/OR OTHER SPACE CONSTRAINTS. 2. INSTALL SYSTEMS SUCH THAT REQUIRED CLEARANCE AND SERVICE ACCESS SPACE INSTALL SYSTEMS SUCH THAT REQUIRED CLEARANCE AND SERVICE ACCESS SPACE IS PROVIDED AROUND ALL MECHANICAL AND ELECTRICAL EQUIPMENT, AND AROUND ANY COMPONENTS WHICH REQUIRE SERVICE ACCESS. 3. PIPING SHALL NOT BE INSTALLED ABOVE ELECTRICAL TRANSFORMERS, PIPING SHALL NOT BE INSTALLED ABOVE ELECTRICAL TRANSFORMERS, SWITCHBOARDS, PANELBOARDS OR MOTOR CONTROL CENTERS. 4. COORDINATE AND PROVIDE ACCESS DOORS WITHIN INACCESSIBLE CEILING, SHAFT, COORDINATE AND PROVIDE ACCESS DOORS WITHIN INACCESSIBLE CEILING, SHAFT, AND CHASE AREAS FOR ALL COMPONENTS WHICH REQUIRE SERVICE ACCESS. REFER TO ARCHITECTURAL DRAWINGS FOR CEILING TYPES. 5. PROVIDE SUPPLEMENTARY STEEL AS REQUIRED FOR THE PROPER SUPPORT OF ALL PROVIDE SUPPLEMENTARY STEEL AS REQUIRED FOR THE PROPER SUPPORT OF ALL SYSTEMS. 6. REFER TO ARCHITECTURAL PLANS FOR DIMENSIONED LOCATIONS OF PLUMBING REFER TO ARCHITECTURAL PLANS FOR DIMENSIONED LOCATIONS OF PLUMBING FIXTURES. 7. HOT AND COLD WATER PIPING RUN-OUTS TO LAVATORIES AND SINKS SHALL BE HOT AND COLD WATER PIPING RUN-OUTS TO LAVATORIES AND SINKS SHALL BE 1/2" UNLESS OTHERWISE NOTED. 8. PLUMBING VENT PIPING THROUGH ROOF SHALL BE LOCATED A MINIMUM OF 10'-0" PLUMBING VENT PIPING THROUGH ROOF SHALL BE LOCATED A MINIMUM OF 10'-0" FROM ANY FRESH AIR INTAKE LOCATION AND A MINIMUM OF 18" CLEAR FROM THE INSIDE FACE OF PARAPET. 9. PROVIDE CODE REQUIRED CLEARANCE FOR ALL CLEANOUTS INSTALLED IN SANITARY PROVIDE CODE REQUIRED CLEARANCE FOR ALL CLEANOUTS INSTALLED IN SANITARY WASTE AND VENT PIPING. 10. MINIMUM UNDERGROUND PIPE SIZE SHALL BE 3".MINIMUM UNDERGROUND PIPE SIZE SHALL BE 3".

AutoCAD SHX Text

%%UPLUMBING GENERAL NOTES:

AutoCAD SHX Text

\\pba.local\projects\2018\2018-0451-00\CAD\2018-0451-M2-PL1.dwg, M201, 3/11/2019 12:20:27 PM, Justin J. Bush, Peter Basso Associates Inc., M201, 3/11/2019 12:20:27 PM, Justin J. Bush, Peter Basso Associates Inc.M201, 3/11/2019 12:20:27 PM, Justin J. Bush, Peter Basso Associates Inc., 3/11/2019 12:20:27 PM, Justin J. Bush, Peter Basso Associates Inc.3/11/2019 12:20:27 PM, Justin J. Bush, Peter Basso Associates Inc., Justin J. Bush, Peter Basso Associates Inc.Justin J. Bush, Peter Basso Associates Inc., Peter Basso Associates Inc.

AutoCAD SHX Text

THE FOLLOWING DIMENSION EQUALS ONE INCH WHEN PRINTED TO SCALE.

AutoCAD SHX Text

1"

AutoCAD SHX Text

68182

AutoCAD SHX Text

No.

AutoCAD SHX Text

CHRISTOPHER

AutoCAD SHX Text

FRANTZ

AutoCAD SHX Text

ENGINEER

AutoCAD SHX Text

AARON

AutoCAD SHX Text

SCALE: 1/8" = 1' - 0"

AutoCAD SHX Text

%%UFIRST FLOOR PLUMBING AND FIRE PROTECTION PLAN

OPEN OFFICE

104

OFFICE

154

RECEPTION

152

STOR.

106

TOILET

153

CORRIDOR

113

MENS

150

WOMENS

151

VESTIBULE

101

OFFICE

155

OFFICE

156

ROOM 5

137

ROOM 4

138

ROOM 3

139

ROOM 2

140

ROOM 1

141

ROOM 6

133

ROOM 7

129

GYM

109

STOR.

108

OFFICE

110

MALE LOCKERS

118

MALE SHOWER

117

LAUNDRY

116

FEMALE SHOWER

115

MENS RESTROOM

111

WOMENS

RESTROOM

112

FEMALE

LOCKERS

114

SOUVINEERS

121

STOR.

122

MECH. / ELEC.

123

LAWN EQUIP.

124

STOR.

126

JAN.

127

STOR.

131

OFFICE

130

OFFICE

132

STOR.

134

STOR.

135

KITCHEN

148

STOR.

149

BREAK

105

LOBBY

102

PUBLIC COUNTER

103

WERTZ ROOM

107

VESTIBULE

119

OFFICE

120

STORAGE

125

ROOM 8

128

CORRIDOR

136

UP

A201

2

NEW SIDEWALK

NEW DOOR STOOP

NEW STOOP

NEW STOOP

A401

1

A411

4

A411

A411

9

A411

10

A412

4

2

5

1


ANDERSON,

Phone 586 726 1234 Fax 586 726 8780


Michigan 48315

www.aewinc.com


Fax: 248-879-0007


Tel: 248-879-5666






SHEET TITLE:


SCALE:

PRELIMINARY


PROJECT NO.

SHEET NO.

CLIENT:

PROJECT NAME:

CONSTRUCTION RECORD

DATE:



















0132-1007


SHELBY TOWNSHIP

02/28/2019



CallR


BID ISSUE02/28/2019


..

FIRST FLOORSHEET METAL PLAN

M401

1/8"=1'-0"


AutoCAD SHX Text

RTU

AutoCAD SHX Text

4

AutoCAD SHX Text

RTU

AutoCAD SHX Text

6

AutoCAD SHX Text

14x8

AutoCAD SHX Text

12x10

AutoCAD SHX Text

10x6

AutoCAD SHX Text

20x12

AutoCAD SHX Text

20x12

AutoCAD SHX Text

12x10

AutoCAD SHX Text

10x8

AutoCAD SHX Text

10x6

AutoCAD SHX Text

20x12

AutoCAD SHX Text

16x12

AutoCAD SHX Text

12x12

AutoCAD SHX Text

8x12

AutoCAD SHX Text

14x10

AutoCAD SHX Text

8x6

AutoCAD SHX Text

S-1

AutoCAD SHX Text

6%%c

AutoCAD SHX Text

110-3

AutoCAD SHX Text

S-1

AutoCAD SHX Text

8%%C

AutoCAD SHX Text

250

AutoCAD SHX Text

S-1

AutoCAD SHX Text

8%%C

AutoCAD SHX Text

225

AutoCAD SHX Text

S-1

AutoCAD SHX Text

6%%C

AutoCAD SHX Text

115

AutoCAD SHX Text

S-1

AutoCAD SHX Text

10%%C

AutoCAD SHX Text

285-4

AutoCAD SHX Text

(E) SD 200 CFM

AutoCAD SHX Text

(E) SD 300 CFM

AutoCAD SHX Text

(E) SD

AutoCAD SHX Text

(E) SD

AutoCAD SHX Text

R-1

AutoCAD SHX Text

22x10

AutoCAD SHX Text

R-1

AutoCAD SHX Text

22x10

AutoCAD SHX Text

R-1

AutoCAD SHX Text

22x10

AutoCAD SHX Text

R-1

AutoCAD SHX Text

22x10

AutoCAD SHX Text

R-1

AutoCAD SHX Text

22x10

AutoCAD SHX Text

R-1

AutoCAD SHX Text

22x10

AutoCAD SHX Text

R-1

AutoCAD SHX Text

22x10

AutoCAD SHX Text

EF

AutoCAD SHX Text

1

AutoCAD SHX Text

1

AutoCAD SHX Text

1

AutoCAD SHX Text

3

AutoCAD SHX Text

2

AutoCAD SHX Text

2

AutoCAD SHX Text

2

AutoCAD SHX Text

2

AutoCAD SHX Text

2

AutoCAD SHX Text

T

AutoCAD SHX Text

HVAC-1

AutoCAD SHX Text

T

AutoCAD SHX Text

RTU-6

AutoCAD SHX Text

T

AutoCAD SHX Text

S-1

AutoCAD SHX Text

6%%C

AutoCAD SHX Text

50

AutoCAD SHX Text

%%UCONSTRUCTION KEY NOTES:

AutoCAD SHX Text

#

AutoCAD SHX Text

1. INSTALL CURB ADAPTORS FOR NEW ROOFTOP UNITS TO MATCH ROOF PENETRATIONS INSTALL CURB ADAPTORS FOR NEW ROOFTOP UNITS TO MATCH ROOF PENETRATIONS FOR EXISTING SUPPLY AND RETURN DUCTWORK. 2. CLEAN EXISTING DUCTWORK. CLEAN EXISTING DUCTWORK. 3. CONNECT NEW EXHAUST FAN TO EXISTING EXHAUST DUCTWORK.CONNECT NEW EXHAUST FAN TO EXISTING EXHAUST DUCTWORK.

AutoCAD SHX Text

1. THESE DRAWINGS ARE DIAGRAMMATIC, AND REPRESENT THE GENERAL INTENT AND THESE DRAWINGS ARE DIAGRAMMATIC, AND REPRESENT THE GENERAL INTENT AND ARRANGEMENT OF SYSTEMS. THEY ARE NOT TO BE CONSIDERED FABRICATION/COORDINATION/SHOP DRAWINGS. COORDINATION WITH OTHER TRADES IS REQUIRED. PROVIDE THE ADDITIONAL FITTINGS AND OFFSETS THAT WILL BE REQUIRED TO COMPLETE EACH SYSTEM AND TO AVOID INTERFERENCES WITH ALL OTHER SYSTEMS INCLUDING THE STRUCTURE, PIPING SYSTEMS, ELECTRICAL CONDUITS, BUS DUCTS, CABLE TRAY, LIGHT FIXTURES, ETC. AND/OR OTHER SPACE CONSTRAINTS. 2. INSTALL SYSTEMS SUCH THAT REQUIRED CLEARANCE AND SERVICE ACCESS SPACE INSTALL SYSTEMS SUCH THAT REQUIRED CLEARANCE AND SERVICE ACCESS SPACE IS PROVIDED AROUND ALL MECHANICAL AND ELECTRICAL EQUIPMENT, AND AROUND ANY COMPONENTS WHICH REQUIRE SERVICE ACCESS. 3. PIPING AND DUCTWORK SHALL NOT BE INSTALLED ABOVE ELECTRICAL PIPING AND DUCTWORK SHALL NOT BE INSTALLED ABOVE ELECTRICAL TRANSFORMERS, SWITCHBOARDS, PANELBOARDS OR MOTOR CONTROL CENTERS. 4. COORDINATE AND PROVIDE ACCESS DOORS WITHIN INACCESSIBLE CEILING, SHAFT, COORDINATE AND PROVIDE ACCESS DOORS WITHIN INACCESSIBLE CEILING, SHAFT, AND CHASE AREAS FOR ALL COMPONENTS WHICH REQUIRE SERVICE ACCESS. REFER TO ARCHITECTURAL DRAWINGS FOR CEILING TYPES. 5. PROVIDE SUPPLEMENTARY STEEL AS REQUIRED FOR THE PROPER SUPPORT OF ALL PROVIDE SUPPLEMENTARY STEEL AS REQUIRED FOR THE PROPER SUPPORT OF ALL SYSTEMS. 6. REFER TO ARCHITECTURAL REFLECTED CEILING PLANS FOR DIMENSIONED LOCATION REFER TO ARCHITECTURAL REFLECTED CEILING PLANS FOR DIMENSIONED LOCATION OF GRILLES, REGISTERS, AND DIFFUSERS.

AutoCAD SHX Text

%%USHEET METAL GENERAL NOTES:

AutoCAD SHX Text

\\pba.local\projects\2018\2018-0451-00\CAD\2018-0451-M4-SM1.dwg, M401, 3/11/2019 12:20:36 PM, Justin J. Bush, Peter Basso Associates Inc., M401, 3/11/2019 12:20:36 PM, Justin J. Bush, Peter Basso Associates Inc.M401, 3/11/2019 12:20:36 PM, Justin J. Bush, Peter Basso Associates Inc., 3/11/2019 12:20:36 PM, Justin J. Bush, Peter Basso Associates Inc.3/11/2019 12:20:36 PM, Justin J. Bush, Peter Basso Associates Inc., Justin J. Bush, Peter Basso Associates Inc.Justin J. Bush, Peter Basso Associates Inc., Peter Basso Associates Inc.

AutoCAD SHX Text


AutoCAD SHX Text

1"

AutoCAD SHX Text

68182

AutoCAD SHX Text

No.

AutoCAD SHX Text

CHRISTOPHER

AutoCAD SHX Text

FRANTZ

AutoCAD SHX Text

ENGINEER

AutoCAD SHX Text

AARON

AutoCAD SHX Text

SCALE: 1/8" = 1' - 0"

AutoCAD SHX Text

%%UFIRST FLOOR SHEET METAL PLAN


ANDERSON,

Phone 586 726 1234 Fax 586 726 8780


Michigan 48315

www.aewinc.com


Fax: 248-879-0007


Tel: 248-879-5666






SHEET TITLE:


SCALE:

PRELIMINARY


PROJECT NO.

SHEET NO.

CLIENT:

PROJECT NAME:

CONSTRUCTION RECORD

DATE:



















0132-1007


SHELBY TOWNSHIP

02/28/2019



CallR


BID ISSUE02/28/2019


..

MECHANICALSCHEDULES

M702

1/8"=1'-0"


AutoCAD SHX Text

UNITARY ROOFTOP AIR CONDITIONING UNIT SCHEDULE

AutoCAD SHX Text

UNIT I.D.

AutoCAD SHX Text

SUPPLY FAN

AutoCAD SHX Text

COOLING SECTION - DX

AutoCAD SHX Text

INTEGRAL AIR-COOLED CONDENSING SECTION

AutoCAD SHX Text

HEATING SECTION - GAS FIRED (NATURAL GAS)

AutoCAD SHX Text

FILTER SECTION

AutoCAD SHX Text

ROOF CURB

AutoCAD SHX Text

MAXIMUM UNIT DIMENSIONS

AutoCAD SHX Text

MAXIMUM UNIT OPERATING WEIGHT LBS. (WITH CURB)

AutoCAD SHX Text

TOTAL UNIT ELECTRICAL

AutoCAD SHX Text

MODEL NO.

AutoCAD SHX Text

NOTES

AutoCAD SHX Text

AIRFLOW CFM

AutoCAD SHX Text

MINIMUM OUTSIDE AIR FLOW CFM

AutoCAD SHX Text

E.S.P. IN. W.G.

AutoCAD SHX Text

T.S.P. IN. W.G.

AutoCAD SHX Text

FAN SPEED RPM

AutoCAD SHX Text

BHP

AutoCAD SHX Text

HP

AutoCAD SHX Text

MIXED AIR

AutoCAD SHX Text

UNIT LEAVING AIR

AutoCAD SHX Text

NET UNIT CAPACITY

AutoCAD SHX Text

NUMBER OF CIRCUITS

AutoCAD SHX Text

REFRIG. TYPE

AutoCAD SHX Text

MAX. FACE VEL. F.P.M.

AutoCAD SHX Text

DESIGN AMBIENT TEMP °F

AutoCAD SHX Text

MIN. AMBIENT TEMP. °F

AutoCAD SHX Text

NO. OF CAPACITY CONTROL STAGES

AutoCAD SHX Text

AIR TEMP.

AutoCAD SHX Text

CAPACITY (MBH)

AutoCAD SHX Text

MIN/MAX MANUFACTURER REQUIRED INLET PRESSURE AT GAS TRAIN

AutoCAD SHX Text

MIN. NO. OF CAPACITY CONTROL STAGES

AutoCAD SHX Text

TYPE

AutoCAD SHX Text

MERV

AutoCAD SHX Text

AIR PRESS. DROP

AutoCAD SHX Text

TYPE

AutoCAD SHX Text

HEIGHT

AutoCAD SHX Text

LENGTH

AutoCAD SHX Text

HEIGHT (WITH CURB)

AutoCAD SHX Text

WIDTH

AutoCAD SHX Text

VOLTS

AutoCAD SHX Text

PHASE

AutoCAD SHX Text

MCA

AutoCAD SHX Text

MOP

AutoCAD SHX Text

OPTIONS/ ACCESSORIES

AutoCAD SHX Text

E.D.B. °F

AutoCAD SHX Text

E.W.B. °F

AutoCAD SHX Text

L.D.B. °F

AutoCAD SHX Text

L.W.B. °F

AutoCAD SHX Text

TOTAL MBH

AutoCAD SHX Text

SENSIBLE MBH

AutoCAD SHX Text

E.A.T. °F

AutoCAD SHX Text

L.A.T. °F

AutoCAD SHX Text

INPUT

AutoCAD SHX Text

OUTPUT

AutoCAD SHX Text

INITIAL IN. W.G.

AutoCAD SHX Text

FINAL IN. W.G.

AutoCAD SHX Text

STANDARD

AutoCAD SHX Text

VIBRATION ISOLATION SPRING CURB NOTE 7

AutoCAD SHX Text

RTU-4

AutoCAD SHX Text

4000

AutoCAD SHX Text

1000

AutoCAD SHX Text

1.5

AutoCAD SHX Text

2.0

AutoCAD SHX Text

1635

AutoCAD SHX Text

2.85

AutoCAD SHX Text

2.75

AutoCAD SHX Text

80.0

AutoCAD SHX Text

67.0

AutoCAD SHX Text

59.8

AutoCAD SHX Text

58.4

AutoCAD SHX Text

108.2

AutoCAD SHX Text

88.7

AutoCAD SHX Text

2

AutoCAD SHX Text

R-410A

AutoCAD SHX Text

324

AutoCAD SHX Text

95

AutoCAD SHX Text

45

AutoCAD SHX Text

---

AutoCAD SHX Text

70.0

AutoCAD SHX Text

116.5

AutoCAD SHX Text

235.0

AutoCAD SHX Text

188.0

AutoCAD SHX Text

4.5-14.0 IN. WC.

AutoCAD SHX Text

2

AutoCAD SHX Text

THROWAWAY

AutoCAD SHX Text

8

AutoCAD SHX Text

---

AutoCAD SHX Text

---

AutoCAD SHX Text

CURB ADAPTOR

AutoCAD SHX Text

NO

AutoCAD SHX Text

14

AutoCAD SHX Text

88.7

AutoCAD SHX Text

60.9

AutoCAD SHX Text

53.3

AutoCAD SHX Text

2199

AutoCAD SHX Text

208

AutoCAD SHX Text

3

AutoCAD SHX Text

49.0

AutoCAD SHX Text

60

AutoCAD SHX Text

YSC120H3RHA

AutoCAD SHX Text

NOTE 8

AutoCAD SHX Text

RTU-6

AutoCAD SHX Text

1600

AutoCAD SHX Text

400

AutoCAD SHX Text

1.0

AutoCAD SHX Text

1.2

AutoCAD SHX Text

1183

AutoCAD SHX Text

0.85

AutoCAD SHX Text

1

AutoCAD SHX Text

80.0

AutoCAD SHX Text

67.0

AutoCAD SHX Text

59.2

AutoCAD SHX Text

57.8

AutoCAD SHX Text

46.6

AutoCAD SHX Text

36.5

AutoCAD SHX Text

1

AutoCAD SHX Text

R-410A

AutoCAD SHX Text

229

AutoCAD SHX Text

95

AutoCAD SHX Text

45

AutoCAD SHX Text

---

AutoCAD SHX Text

70.0

AutoCAD SHX Text

131.1

AutoCAD SHX Text

130.0

AutoCAD SHX Text

105.3

AutoCAD SHX Text

4.5-14.0 IN. WC.

AutoCAD SHX Text

2

AutoCAD SHX Text

THROWAWAY

AutoCAD SHX Text

8

AutoCAD SHX Text

---

AutoCAD SHX Text

---

AutoCAD SHX Text

CURB ADAPTOR

AutoCAD SHX Text

NO

AutoCAD SHX Text

14

AutoCAD SHX Text

69.8

AutoCAD SHX Text

54.9

AutoCAD SHX Text

44.3

AutoCAD SHX Text

1183

AutoCAD SHX Text

208

AutoCAD SHX Text

3

AutoCAD SHX Text

26.0

AutoCAD SHX Text

35

AutoCAD SHX Text

YSC048G3RH

AutoCAD SHX Text

remarks

AutoCAD SHX Text

NOTE: : 1. REFER TO SCHEDULES GENERAL NOTES. 2. MODEL NUMBERS ARE TRANE UNLESS OTHERWISE NOTED 3. DESIGN MINIMUM OUTSIDE AIRFLOW CFM (VENTILATION) LISTED IS BASED ON THE ESTIMATED MAXIMUM OCCUPANT LOAD. REFER TO TEMPERATURE CONTROL DRAWINGS FOR OUTSIDE AIR CONTROL SEQUENCE. 4. MERV DESIGNATES THE "MINIMUM EFFICIENCY REPORTING VALUE" AS EVALUATED UNDER ASHRAE STANDARD 52.2 1999. 5. AIR HANDLING UNIT TOTAL STATIC PRESSURE FOR VARIABLE AIR VOLUME SYSTEMS IS BASED ON THE FILTER DIRTY AIR PRESSURE DROP AND AVERAGE/MIDLIFE FILTER AIR PRESSURE DROP FOR CONSTANT VOLUME SYSTEMS UNLESS NOTED OTHERWISE. 6. UNIT SHALL HAVE A SINGLE POINT ELECTRICAL CONNECTION WITH FACTORY INSTALLED DISCONNECT MEANS, STARTERS, AND CONTROLS. 7. REFER TO VIBRATION ISOLATOR APPLICATION SCHEDULE. 8. ROOF TOP UNIT SHALL BE ASHRAE 90.1 COMPLIANT. INSTALL TWO-SPEED FAN CONTROL AND 3-STAGE COMPRESSOR CONTROL ON UNIT.

AutoCAD SHX Text

POWER VENTILATOR SCHEDULE

AutoCAD SHX Text

UNIT IDENTIFICATION

AutoCAD SHX Text

ROOM SERVED

AutoCAD SHX Text

TYPE

AutoCAD SHX Text

AIRFLOW CFM

AutoCAD SHX Text

T.S.P. IN. W.G.

AutoCAD SHX Text

TIP SPEED FPM

AutoCAD SHX Text

FAN RPM

AutoCAD SHX Text

MOTOR

AutoCAD SHX Text

MODULATION/ CONTROL TYPE

AutoCAD SHX Text

ELECTRICAL

AutoCAD SHX Text

MODEL NUMBER

AutoCAD SHX Text

REMARKS

AutoCAD SHX Text

BHP

AutoCAD SHX Text

HP

AutoCAD SHX Text

RPM

AutoCAD SHX Text

DRIVE TYPE

AutoCAD SHX Text

VOLTS

AutoCAD SHX Text

PHASE

AutoCAD SHX Text

OPTIONS/ ACCESSORIES

AutoCAD SHX Text

EF-1

AutoCAD SHX Text

TOILET 153

AutoCAD SHX Text

CEILING

AutoCAD SHX Text

100

AutoCAD SHX Text

0.3

AutoCAD SHX Text

---

AutoCAD SHX Text

950

AutoCAD SHX Text

0.1

AutoCAD SHX Text

---

AutoCAD SHX Text

---

AutoCAD SHX Text

DIRECT

AutoCAD SHX Text

MANUAL

AutoCAD SHX Text

120

AutoCAD SHX Text

1

AutoCAD SHX Text

---

AutoCAD SHX Text

SP-B110

AutoCAD SHX Text

NOTE: 1. REFER TO SCHEDULES GENERAL NOTES. 2. MODEL NUMBERS ARE GREENHECK UNLESS OTHERWISE NOTED.

AutoCAD SHX Text

GRILLE, REGISTER, AND DIFFUSER SCHEDULE

AutoCAD SHX Text

UNIT IDENTIFICATION

AutoCAD SHX Text

TYPE

AutoCAD SHX Text

FACE SIZE

AutoCAD SHX Text

NECK SIZE

AutoCAD SHX Text

FRAME TYPE

AutoCAD SHX Text

ACCESSORY

AutoCAD SHX Text

CONSTRUCTION

AutoCAD SHX Text

FINISH

AutoCAD SHX Text

MODEL NUMBER

AutoCAD SHX Text

REMARKS

AutoCAD SHX Text

S-1

AutoCAD SHX Text

DIFFUSER

AutoCAD SHX Text

24x24

AutoCAD SHX Text

SEE PLANS

AutoCAD SHX Text

NOTE 2

AutoCAD SHX Text

---

AutoCAD SHX Text

STEEL

AutoCAD SHX Text

WHITE

AutoCAD SHX Text

OMNI

AutoCAD SHX Text

---

AutoCAD SHX Text

R-1

AutoCAD SHX Text

REGISTER

AutoCAD SHX Text

SEE PLANS

AutoCAD SHX Text

SEE PLANS

AutoCAD SHX Text

NOTE 2

AutoCAD SHX Text

---

AutoCAD SHX Text

STEEL

AutoCAD SHX Text

WHITE

AutoCAD SHX Text

PAR

AutoCAD SHX Text

---

AutoCAD SHX Text

NOTE: 1. MODEL NUMBERS ARE TITUS UNLESS OTHERWISE NOTED. 2. COORDINATE FRAME TYPE WITH ARCHITECTURAL TRADES. 3. HORIZONTAL BLADES TO BE POSITIONED AT 0 DEGREES HORIZONTAL DEFLECTION. VERTICAL BLADES TO HAVE 45 DEGREE SPREAD.

AutoCAD SHX Text

DUCT SYSTEM APPLICATION SCHEDULE

AutoCAD SHX Text

DUCT MATERIAL

AutoCAD SHX Text

AIR SYSTEMS

AutoCAD SHX Text

G90 GALV. SHEET METAL

AutoCAD SHX Text

DOUBLE-WALL LINED G90 GALV. SHEET METAL (SOLID INNER WALL)

AutoCAD SHX Text

DOUBLE-WALL LINED G90 GALV. SHEET METAL (PERF. INNER WALL)

AutoCAD SHX Text

G90 GALV. SHEET METAL WITH 1-INCH LINING

AutoCAD SHX Text

GALVANNEALED SHEET METAL

AutoCAD SHX Text

ALUMINUM

AutoCAD SHX Text

TYPE 304 STAINLESS STEEL

AutoCAD SHX Text

TYPE 316 STAINLESS STEEL

AutoCAD SHX Text

PVC COATED GALV. SHEET METAL (4X1)

AutoCAD SHX Text


AutoCAD SHX Text


AutoCAD SHX Text

16 GA. CARBON STEEL

AutoCAD SHX Text

ZERO-CLEARANCE PREFABRICATED RANGE HOOD EXHAUST DUCT

AutoCAD SHX Text

FABRIC

AutoCAD SHX Text

DESIGN PRESSURE CLASS (INCHES WG)

AutoCAD SHX Text

SEAL CLASS

AutoCAD SHX Text

MAX. ALLOWABLE LEAKAGE RATE (PERCENT)

AutoCAD SHX Text

KEYED NOTES

AutoCAD SHX Text

SUPPLY AIR WITHOUT TERMINAL UNITS

AutoCAD SHX Text

X

AutoCAD SHX Text

+2

AutoCAD SHX Text

A

AutoCAD SHX Text

5

AutoCAD SHX Text

AIR TRANSFER DUCT

AutoCAD SHX Text

X

AutoCAD SHX Text

+2

AutoCAD SHX Text

A

AutoCAD SHX Text

5

AutoCAD SHX Text

GENERAL NOTES 1. 'X' INDICATES ACCEPTABLE SELECTION. IF MORE THAN ONE SELECTION IS INDICATED FOR A DUCT SYSTEM, CONTRACTOR MAY SELECT FROM THOSE INDICATED SELECTIONS. 2. 4 X 1 PVC-COATED GALVANIZED STEEL: FACTORY-APPLIED PVC COATINGS SHALL BE 4 MILS (0.10 MM) THICK ON EXTERIOR SHEET METAL SURFACES OF DUCTS AND FITTINGS EXPOSED TO CORROSIVE CONDITIONS AND MINIMUM 1 MIL (0.025 MM) THICK ON INTERIOR SURFACES. 3. 1 X 4 (4 X 1 REVERSE COATED) PVC-COATED GALVANIZED STEEL: FACTORY-APPLIED PVC COATINGS SHALL BE 4 MILS (0.10 MM) THICK ON INTERIOR SHEET METAL SURFACES OF DUCTS AND FITTINGS EXPOSED TO CORROSIVE CONDITIONS AND MINIMUM 1 MIL (0.025 MM) THICK ON EXTERIOR SURFACES. 4. 4 X 4 PVC-COATED GALVANIZED STEEL: FACTORY-APPLIED PVC COATINGS SHALL BE 4 MILS (0.10 MM) THICK ON SHEET METAL SURFACES OF DUCTS AND FITTINGS EXPOSED TO CORROSIVE CONDITIONS AND 4 MILS (0.10 MM) THICK ON OPPOSITE SURFACES.

AutoCAD SHX Text

DUCT SYSTEM INSULATION APPLICATION SCHEDULE

AutoCAD SHX Text

INSULATION MATERIAL & THICKNESS (INCHES)

AutoCAD SHX Text

FIELD APPLIED JACKET MATERIAL

AutoCAD SHX Text

FIBERGLASS BLANKET 0.75 LB/CU FT

AutoCAD SHX Text

FIBERGLASS BLANKET 1.0 LB/CU FT

AutoCAD SHX Text

FIBERGLASS BOARD 2.25 LB/CU FT

AutoCAD SHX Text

FIBERGLASS BOARD 6.0 LB/CU FT

AutoCAD SHX Text

FLEXIBLE ELASTOMERIC

AutoCAD SHX Text

ASTM E2336 2-HOUR FIRE RATED BLANKET

AutoCAD SHX Text

2-HOUR FIRE RATED BLANKET

AutoCAD SHX Text

KEYED NOTES

AutoCAD SHX Text

ALUMINUM

AutoCAD SHX Text

SELF-ADHESIVE (FOR OUTDOOR APPLICATIONS)

AutoCAD SHX Text

DUCT SYSTEMS LOCATED INDOORS

AutoCAD SHX Text

SUPPLY AIR

AutoCAD SHX Text

1.5

AutoCAD SHX Text

A, E

AutoCAD SHX Text

PLENUMS, DUCTS, AND DUCT ACCESSORIES NOT REQUIRING INSULATION: FIBROUS-GLASS DUCTS DOUBLE-WALL METAL DUCTS WITH INSULATION OF SUFFICIENT THICKNESS TO COMPLY WITH ENERGY CODE AND ASHRAE/IESNA 90.1 - 2013 METAL DUCTS WITH DUCT LINER OF SUFFICIENT THICKNESS TO COMPLY WITH ENERGY CODE AND ASHRAE/IESNA 90.1 - 2013 FABRIC SUPPLY DUCTS FACTORY-INSULATED FLEXIBLE DUCTS FACTORY-INSULATED PLENUMS AND CASINGS FLEXIBLE CONNECTORS VIBRATION-CONTROL DEVICES FACTORY-INSULATED ACCESS PANELS AND DOORS

AutoCAD SHX Text

GENERAL NOTES 1. 'X' OR THICKNESS IN INCHES INDICATE ACCEPTABLE SELECTION. IF MORE THAN ONE SELECTION IS INDICATED FOR A DUCT SYSTEM, CONTRACTOR MAY SELECT FROM THOSE INDICATED SELECTIONS. 2. REFER TO METAL DUCT SECTION OF SPECIFICATIONS FOR DUCT LINING AND DOUBLE-WALL INSULATED DUCT. 3. REFER TO HVAC CASINGS SECTION OF SPECIFICATIONS FOR DOUBLE-WALL INSULATED PLENUMS. KEYED NOTES A. INCLUDE INSULATION AROUND DUCT MOUNTED COILS AND AIR TERMINAL UNIT COILS. E. EXPOSED SUPPLY DUCTWORK LOCATED IN CONDITIONED SPACE SERVED BY THAT SYSTEM IS NOT REQUIRED TO BE INSULATED.

AutoCAD SHX Text

HORIZONTAL PIPING AND SUPPORT APPLICATION SCHEDULE

AutoCAD SHX Text

HANGER OR SUPPORT TYPE

AutoCAD SHX Text

SHIELD TYPE

AutoCAD SHX Text

METAL PIPE TYPE & SIZE

AutoCAD SHX Text

MSS TYPE 1 CLEVIS HANGER

AutoCAD SHX Text

MSS TYPE 10 SWIVEL RING BAND HANGER

AutoCAD SHX Text

MSS TYPE 41 DOUBLE ROD PIPE ROLLER

AutoCAD SHX Text

MSS TYPE 43 SINGLE ROD ROLLER HANGER

AutoCAD SHX Text

MSS TYPE 44 PIPE ROLLER & STAND

AutoCAD SHX Text

MSS TYPE 46 ADJUSTABLE PIPE ROLL STAND

AutoCAD SHX Text

MSS TYPE 39 PROTECTION SADDLE

AutoCAD SHX Text

MSS TYPE 40 INSULATION PROTECTION SHIELD

AutoCAD SHX Text

THERMAL-HANGER SHIELD

AutoCAD SHX Text

KEYED NOTES

AutoCAD SHX Text

UNINSULATED SINGLE PIPE

AutoCAD SHX Text

UP TO 2 INCH

AutoCAD SHX Text

X

AutoCAD SHX Text

X

AutoCAD SHX Text

2-1/2 INCH TO 4 INCH

AutoCAD SHX Text

X

AutoCAD SHX Text

X

AutoCAD SHX Text

INSULATED SINGLE COLD PIPES

AutoCAD SHX Text

UP TO 2 INCH

AutoCAD SHX Text

X

AutoCAD SHX Text

X

AutoCAD SHX Text

X

AutoCAD SHX Text

X

AutoCAD SHX Text

A

AutoCAD SHX Text

INSULATED SINGLE HOT PIPES

AutoCAD SHX Text

UP TO 2 INCH

AutoCAD SHX Text

X

AutoCAD SHX Text

X

AutoCAD SHX Text

X

AutoCAD SHX Text

X

AutoCAD SHX Text

X

AutoCAD SHX Text

A, C

AutoCAD SHX Text

GENERAL NOTES 1. "X" INDICATES APPROVED HANGER OR SUPPORT ELEMENTS. IF MORE THAN ONE HANGER OR SUPPORT ELEMENT IS INDICATED, SELECTION FROM APPROVED ELEMENTS IS CONTRACTOR'S OPTION. 2. REFER TO HANGER AND SUPPORT SECTION FOR APPROVED MANUFACTURERS. 3. HANGERS AND SUPPORTS USED FOR FIRE PROTECTION SERVICES SHALL BE UL LISTED OR FMG APPROVED. 4. HANGER ELEMENTS IN CONTACT WITH BARE COPPER PIPE SHALL BE COPPER PLATED, PLASTIC COATED, FELT LINED, OR USE MANUFACTURED COPPER TUBE ISOLATORS. 5. REFER TO INDIVIDUAL PIPING SPECIFICATION SECTIONS FOR HANGER SPACING. 6. MULTIPLE PARALLEL COLD PIPES MAY BE TRAPEZE SUPPORTED FROM BELOW USING U-BOLTS OR STRUT CLAMPS AND THERMAL HANGER SHIELDS. REFER TO KEYED NOTE A. 7. MULTIPLE PARALLEL COLD PIPES MAY BE TRAPEZE SUPPORTED FROM ABOVE USING STANDARD HANGER ELEMENTS INDICATED FOR SINGLE COLD PIPES. 8. MULTIPLE PARALLEL HOT PIPES MAY BE TRAPEZE SUPPORTED FROM BELOW USING ROLLER ELEMENTS AND THERMAL HANGER SHIELD OR INSULATION PROTECTION SADDLE. REFER TO KEYED NOTES B AND C. 9. MULTIPLE PARALLEL HOT PIPES MAY BE TRAPEZE SUPPORTED FROM ABOVE USING STANDARD ROLLER HANGERS INDICATED AND THERMAL HANGER SHIELD OR INSULATION PROTECTION SADDLE. REFER TO KEY NOTES B AND C. 10. REFER TO INDIVIDUAL PIPING SPECIFICATION SECTIONS FOR ADDITIONAL SYSTEM SPECIFIC HANGER APPLICATIONS. KEYED NOTES A. USE THERMAL HANGER SHIELD ON TRAPEZE SUPPORTED INSULATED PIPE TO PREVENT CRUSHING OF INSULATION. B. USE THERMAL HANGER SHIELD DESIGNED FOR USE ON ROLLER SUPPORTS FOR INSULATED HOT PIPE . C. USE TYPE 39 PROTECTION SADDLES IF INSULATION WITHOUT VAPOR BARRIER IS INDICATED. FILL INTERIOR VOIDS WITH INSULATION MATCHING ADJOINING INSULATION.

AutoCAD SHX Text

\\pba.local\projects\2018\2018-0451-00\CAD\2018-0451-M7-SH.dwg, M702, 3/11/2019 12:20:44 PM, Justin J. Bush, Peter Basso Associates Inc., M702, 3/11/2019 12:20:44 PM, Justin J. Bush, Peter Basso Associates Inc.M702, 3/11/2019 12:20:44 PM, Justin J. Bush, Peter Basso Associates Inc., 3/11/2019 12:20:44 PM, Justin J. Bush, Peter Basso Associates Inc.3/11/2019 12:20:44 PM, Justin J. Bush, Peter Basso Associates Inc., Justin J. Bush, Peter Basso Associates Inc.Justin J. Bush, Peter Basso Associates Inc., Peter Basso Associates Inc.

AutoCAD SHX Text

68182

AutoCAD SHX Text

No.

AutoCAD SHX Text

CHRISTOPHER

AutoCAD SHX Text

FRANTZ

AutoCAD SHX Text

ENGINEER

AutoCAD SHX Text

AARON

“

”


ANDERSON,

Phone 586 726 1234 Fax 586 726 8780


Michigan 48315

www.aewinc.com


Fax: 248-879-0007


Tel: 248-879-5666






SHEET TITLE:


SCALE:

PRELIMINARY


PROJECT NO.

SHEET NO.

CLIENT:

PROJECT NAME:

CONSTRUCTION RECORD

DATE:



















0132-1007


SHELBY TOWNSHIP

02/28/2019



CallR


BID ISSUE02/28/2019


..

TEMPERATURECONTROL

STANDARDS ANDGENERAL NOTES

M801

1/8"=1'-0"


AutoCAD SHX Text

TEMPERATURE CONTROL - SYMBOLS LIST

AutoCAD SHX Text

VALVE - 2 WAY CONTROL W/ POSITIONER

AutoCAD SHX Text

VALVE - 3 WAY CONTROL W/ POSITIONER

AutoCAD SHX Text

VOLTAGE SENSOR

AutoCAD SHX Text

VARIABLE FREQUENCY CONTROLLER

AutoCAD SHX Text

VELOCITY SENSOR

AutoCAD SHX Text

VIBRATION SWITCH

AutoCAD SHX Text

VS

AutoCAD SHX Text

V

AutoCAD SHX Text

VIB

AutoCAD SHX Text

M

AutoCAD SHX Text

VFC

AutoCAD SHX Text

THERMOSTAT FOR NIGHT SETBACK

AutoCAD SHX Text

(AS DEFINED ON TC DRAWINGS)

AutoCAD SHX Text

TRANSFORMER

AutoCAD SHX Text

VALVE - 3 WAY CONTROL VALVE

AutoCAD SHX Text

VALVE - 2 WAY CONTROL VALVE

AutoCAD SHX Text

THERMOSTAT OR TEMPERATURE SENSOR

AutoCAD SHX Text

TEMPERATURE SENSOR - DUCT MOUNTED AVG ELEMENT

AutoCAD SHX Text

TEMPERATURE SENSOR - DUCT MOUNTED RIGID ELEMENT

AutoCAD SHX Text

TEMPERATURE SENSOR - RIGID ELEMENT IN WELL

AutoCAD SHX Text

TEMPERATURE SENSOR - STRAP ON BULB

AutoCAD SHX Text

START/STOP RELAY

AutoCAD SHX Text

STATIC PRESSURE TRANSMITTER

AutoCAD SHX Text

STATIC PRESSURE SENSOR OR PROBE

AutoCAD SHX Text

SWITCH

AutoCAD SHX Text

M

AutoCAD SHX Text

N

AutoCAD SHX Text

T

AutoCAD SHX Text

XF

AutoCAD SHX Text

T

AutoCAD SHX Text

T

AutoCAD SHX Text

T

AutoCAD SHX Text

T

AutoCAD SHX Text

T

AutoCAD SHX Text

SPT

AutoCAD SHX Text

SP

AutoCAD SHX Text

S/S

AutoCAD SHX Text

SW

AutoCAD SHX Text

SMOKE DETECTOR - SPACE MOUNTED

AutoCAD SHX Text

SMOKE DETECTOR - DUCT MOUNTED

AutoCAD SHX Text

RELAY, ELECTRIC

AutoCAD SHX Text

PRESSURE TRANSMITTER

AutoCAD SHX Text

SIGNAL - PACKAGED EQUIPMENT, DIGITAL OUTPUT

AutoCAD SHX Text

SIGNAL - PACKAGED EQUIPMENT, DIGITAL INPUT

AutoCAD SHX Text

SIGNAL - PACKAGED EQUIPMENT, ANALOG OUTPUT

AutoCAD SHX Text

SIGNAL - PACKAGED EQUIPMENT, ANALOG INPUT

AutoCAD SHX Text

SIGNAL - DDC/BAS, ANALOG INPUT

AutoCAD SHX Text

SIGNAL - DDC/BAS, ANALOG OUTPUT

AutoCAD SHX Text

SIGNAL - DDC/BAS, DIGITAL INPUT

AutoCAD SHX Text

SIGNAL - DDC/BAS, DIGITAL OUTPUT

AutoCAD SHX Text

PNEUMATIC-ELECTRIC SWITCH

AutoCAD SHX Text

PRESSURE SWITCH

AutoCAD SHX Text

SELECTOR SWITCH, (N=NUMBER OF POSITIONS)

AutoCAD SHX Text

DI

AutoCAD SHX Text

SD

AutoCAD SHX Text

DI

AutoCAD SHX Text

DO

AutoCAD SHX Text

DD

AutoCAD SHX Text

AI

AutoCAD SHX Text

AO

AutoCAD SHX Text

DO

AutoCAD SHX Text

AI

AutoCAD SHX Text

AO

AutoCAD SHX Text

N

AutoCAD SHX Text

R

AutoCAD SHX Text

PT

AutoCAD SHX Text

PE

AutoCAD SHX Text

PS

AutoCAD SHX Text

%%uPNEUMATIC CONTROL SYMBOLS (ADDITIONAL)

AutoCAD SHX Text

LOW PRESSURE SELECTOR RELAY

AutoCAD SHX Text

MANUAL GRADUAL POSITION SWITCH

AutoCAD SHX Text

PNEUMATIC SWITCH

AutoCAD SHX Text

RECEIVER CONTROLLER

AutoCAD SHX Text

SWITCHED CONTROL AIR SUPPLY

AutoCAD SHX Text

LR

AutoCAD SHX Text

PS

AutoCAD SHX Text

RC

AutoCAD SHX Text

RR

AutoCAD SHX Text

%%uSYMBOL

AutoCAD SHX Text

RATIO RELAY

AutoCAD SHX Text

LOAD ANALYZER

AutoCAD SHX Text

%%UDESCRIPTION

AutoCAD SHX Text

LA

AutoCAD SHX Text

THERMAL OVERLOAD, SINGLE PHASE

AutoCAD SHX Text

THERMAL OVERLOAD CONTACTS - 3 PHASE

AutoCAD SHX Text

NORMALLY CLOSED TIMED OPEN

AutoCAD SHX Text

NORMALLY CLOSED TIMED CLOSED

AutoCAD SHX Text

NORMALLY OPEN TIMED CLOSED

AutoCAD SHX Text

SINGLE POLE SINGLE THROW

AutoCAD SHX Text

NORMALLY CLOSED

AutoCAD SHX Text

DOUBLE POLE SINGLE THROW

AutoCAD SHX Text

SINGLE POLE DOUBLE THROW

AutoCAD SHX Text

DOUBLE POLE DOUBLE THROW

AutoCAD SHX Text

NORMALLY OPEN TIMED OPEN

AutoCAD SHX Text

WIRING NOT CONNECTED

AutoCAD SHX Text

WIRE TO WIRE TERMINATION

AutoCAD SHX Text

WIRE TERMINATION AT DEVICE

AutoCAD SHX Text

NCTO

AutoCAD SHX Text

NCTC

AutoCAD SHX Text

NOTC

AutoCAD SHX Text

DPDT

AutoCAD SHX Text

NOTO

AutoCAD SHX Text

SPDT

AutoCAD SHX Text

DPST

AutoCAD SHX Text

SPST

AutoCAD SHX Text

NC

AutoCAD SHX Text

NO

AutoCAD SHX Text

NORMALLY OPEN

AutoCAD SHX Text

%%uABBREVIATION

AutoCAD SHX Text

%%UABBREVIATIONS

AutoCAD SHX Text

%%UDESCRIPTION

AutoCAD SHX Text

TRANSFORMER

AutoCAD SHX Text

OLs

AutoCAD SHX Text

SWITCH - MANUAL DPST, NO

AutoCAD SHX Text

SWITCH - TEMPERATURE ACTUATED, NC

AutoCAD SHX Text

SWITCH - TEMPERATURE ACTUATED, NO

AutoCAD SHX Text

SWITCH - PRESSURE & VACUUM, NC

AutoCAD SHX Text

SWITCH - PRESSURE & VACUUM, NO

AutoCAD SHX Text

SWITCH - MANUAL DPDT

AutoCAD SHX Text

SWITCH - MANUAL SPDT

AutoCAD SHX Text

SWITCH - MANUAL DPST, NC

AutoCAD SHX Text

SWITCH - MANUAL SPST, NC

AutoCAD SHX Text

SWITCH - MANUAL SPST, NO

AutoCAD SHX Text

OCCUPANCY SENSOR

AutoCAD SHX Text

LIMIT SWITCH

AutoCAD SHX Text

LINE - PNEUMATIC

AutoCAD SHX Text

LINE - ELECTRIC

AutoCAD SHX Text

G - GREEN LENS

AutoCAD SHX Text

B - BLUE LENS

AutoCAD SHX Text

A - AMBER LENS

AutoCAD SHX Text

R - RED LENS

AutoCAD SHX Text

PILOT LIGHT OR BEACON

AutoCAD SHX Text

LEVEL SWITCH OR TRANSMITTER

AutoCAD SHX Text

GAUGE - TEMPERATURE

AutoCAD SHX Text

GAUGE - PRESSURE

AutoCAD SHX Text

HUMIDITY SENSOR, DUCT MOUNTED

AutoCAD SHX Text

(AS DEFINED ON TC DRAWINGS)

AutoCAD SHX Text

HUMIDIFIER

AutoCAD SHX Text

HUMIDISTAT OR HUMIDITY SENSOR

AutoCAD SHX Text

MAIN CONTROL AIR SUPPLY

AutoCAD SHX Text

MOTOR STARTER

AutoCAD SHX Text

GUARD FOR STAT OR SENSOR

AutoCAD SHX Text

OS

AutoCAD SHX Text

R

AutoCAD SHX Text

M

AutoCAD SHX Text

S

AutoCAD SHX Text

M

AutoCAD SHX Text

LS

AutoCAD SHX Text

LVL

AutoCAD SHX Text

H

AutoCAD SHX Text

H

AutoCAD SHX Text

T

AutoCAD SHX Text

P

AutoCAD SHX Text

FIRE ALARM SYSTEM, ADDRESSABLE INTERFACE MODULE

AutoCAD SHX Text

DAMPER - PARALLEL BLADE

AutoCAD SHX Text

DAMPER MOTOR W/ POSITIVE POSITIONER

AutoCAD SHX Text

DAMPER MOTOR

AutoCAD SHX Text

FLOW MEASURING STATION

AutoCAD SHX Text

ELECTRIC-PNEUMATIC RELAY

AutoCAD SHX Text

DIFFERENTIAL PRESSURE TRANSMITTER

AutoCAD SHX Text

DIFFERENTIAL PRESSURE SWITCH

AutoCAD SHX Text

ELECTRIC TO PNEUMETIC TRANSDUCER

AutoCAD SHX Text

FIRE ALARM SYSTEM, ADDRESSABLE CONTROL MODULE

AutoCAD SHX Text

FLOW METER

AutoCAD SHX Text

FLOW SWITCH

AutoCAD SHX Text

FREEZESTAT

AutoCAD SHX Text

GAUGE - FLOW

AutoCAD SHX Text

FM

AutoCAD SHX Text

FS

AutoCAD SHX Text

FZ

AutoCAD SHX Text

F

AutoCAD SHX Text

IM

AutoCAD SHX Text

FMS

AutoCAD SHX Text

CM

AutoCAD SHX Text

EP

AutoCAD SHX Text

DPT

AutoCAD SHX Text

DPS

AutoCAD SHX Text

EPT

AutoCAD SHX Text

M

AutoCAD SHX Text

M

AutoCAD SHX Text

M

AutoCAD SHX Text

CARBON DIOXIDE SENSOR - DUCT MOUNTED

AutoCAD SHX Text

CARBON MONOXIDE SENSOR - DUCT MOUNTED

AutoCAD SHX Text

CARBON MONOXIDE SENSOR - WALL MOUNTED

AutoCAD SHX Text

CARBON DIOXIDE SENSOR - WALL MOUNTED

AutoCAD SHX Text

DAMPER - INLET VANES

AutoCAD SHX Text

DAMPER - OPPOSED BLADE

AutoCAD SHX Text

CURRENT TRANSMITTER

AutoCAD SHX Text

AQUASTAT, STRAP ON BULB

AutoCAD SHX Text

%%UDESCRIPTION

AutoCAD SHX Text

AIR FLOW CONTROLLER

AutoCAD SHX Text

CURRENT SWITCH

AutoCAD SHX Text

CT

AutoCAD SHX Text

CS

AutoCAD SHX Text

CO2

AutoCAD SHX Text

CO

AutoCAD SHX Text

CO

AutoCAD SHX Text

CO2

AutoCAD SHX Text

%%uSCHEMATIC SYMBOLS

AutoCAD SHX Text

AQ

AutoCAD SHX Text

%%uSYMBOL

AutoCAD SHX Text

AFC

AutoCAD SHX Text

HAND/OFF/AUTO

AutoCAD SHX Text

SWITCH - 3 POSITION SELECTOR

AutoCAD SHX Text

SWITCH - 2 POSITION SELECTOR

AutoCAD SHX Text

SWITCH - LIMIT, NC, HELD OPEN

AutoCAD SHX Text

SWITCH - LIMIT, NO, HELD CLOSED

AutoCAD SHX Text

SWITCH - LIMIT, NC

AutoCAD SHX Text

SWITCH - LIMIT, NO

AutoCAD SHX Text

SWITCH - FLOW (AIR, WATER, ETC.), NC

AutoCAD SHX Text

SWITCH - FLOW (AIR, WATER, ETC.), NO

AutoCAD SHX Text

SWITCH - LIQUID LEVEL, NO

AutoCAD SHX Text

SWITCH - LIQUID LEVEL, NC

AutoCAD SHX Text

PUSH BUTTON - MOMENTARY, NC (MUSHROOM HEAD)

AutoCAD SHX Text

H

AutoCAD SHX Text

1

AutoCAD SHX Text

O

AutoCAD SHX Text

A

AutoCAD SHX Text

2

AutoCAD SHX Text

PUSH BUTTON - MOMENTARY CONTACT, NO & NC

AutoCAD SHX Text

PUSH BUTTON - MOMENTARY, NO (MUSHROOM HEAD)

AutoCAD SHX Text

CONTACT - TIMED AFTER COIL IS DE-ENERGIZED, NOTO

AutoCAD SHX Text

MOTOR, SINGLE PHASE

AutoCAD SHX Text

CONTACT - TIMED AFTER COIL IS DE-ENERGIZED, NCTC

AutoCAD SHX Text

PUSH BUTTON - MOMENTARY CONTACT, NO

AutoCAD SHX Text

PUSH BUTTON - MOMENTARY CONTACT, NC

AutoCAD SHX Text

PILOT LIGHT, WITH PUSH-TO-TEST

AutoCAD SHX Text

PILOT LIGHT OR BEACON

AutoCAD SHX Text

G - GREEN LENS

AutoCAD SHX Text

B - BLUE LENSE

AutoCAD SHX Text

A - AMBER LENS

AutoCAD SHX Text

R - RED LENSE

AutoCAD SHX Text

R

AutoCAD SHX Text

R

AutoCAD SHX Text

GROUND

AutoCAD SHX Text

COIL - TIME DELAY RELAY

AutoCAD SHX Text

CONTACT - INSTANT OPERATING, NO

AutoCAD SHX Text

CONTACT - INSTANT OPERATING, NC

AutoCAD SHX Text

CONTACT - TIMED AFTER COIL IS ENERGIZED, NOTC

AutoCAD SHX Text

CONTACT - TIMED AFTER COIL IS ENERGIZED, NCTO

AutoCAD SHX Text

COIL - VARIABLE SPEED DRIVE CONTACTOR

AutoCAD SHX Text

COIL - EP OR SOLENOID VALVE

AutoCAD SHX Text

COIL - MOTOR STARTER CONTACTOR

AutoCAD SHX Text

AUDIBLE DEVICE (AS DEFINED ON TC DRAWINGS)

AutoCAD SHX Text

COIL - RELAY

AutoCAD SHX Text

TDR

AutoCAD SHX Text

VFC

AutoCAD SHX Text

R

AutoCAD SHX Text

M/S

AutoCAD SHX Text

%%uSCHEMATIC SYMBOLS (CONT.)

AutoCAD SHX Text

%%UDESCRIPTION

AutoCAD SHX Text

%%uSYMBOL

AutoCAD SHX Text

%%uWIRING SYMBOLS

AutoCAD SHX Text

%%uSYMBOL

AutoCAD SHX Text

%%UDESCRIPTION

AutoCAD SHX Text

%%UDESCRIPTION

AutoCAD SHX Text

%%uWIRING SYMBOLS (CONT.)

AutoCAD SHX Text

%%uSYMBOL

AutoCAD SHX Text

NOTES: 1. SOME SYMBOLS & ABBREVIATIONS SHOWN MAY NOT APPLY TO THIS PROJECT. SOME SYMBOLS & ABBREVIATIONS SHOWN MAY NOT APPLY TO THIS PROJECT. 2. REFER TO MECHANICAL STANDARDS ON DRAWING M0.1 FOR ADDITIONAL SYMBOLS & ABBREVIATIONS THAT MAY BE USED ON TEMPERATURE CONTROL DRAWINGS.REFER TO MECHANICAL STANDARDS ON DRAWING M0.1 FOR ADDITIONAL SYMBOLS & ABBREVIATIONS THAT MAY BE USED ON TEMPERATURE CONTROL DRAWINGS.

AutoCAD SHX Text

BUILDING AUTOMATION SYSTEM

AutoCAD SHX Text

TEMPERATURE CONTROLS

AutoCAD SHX Text

DIRECT DIGITAL CONTROL

AutoCAD SHX Text

DDC

AutoCAD SHX Text

TC

AutoCAD SHX Text

BAS

AutoCAD SHX Text

CURRENT SWITCH INSTALLATION DETAIL

AutoCAD SHX Text

TYPICAL NOTES: 1. WHERE INDICATED ON CONTROL DETAILS, CURRENT SWITCHES SHALL BE INSTALLED WHERE INDICATED ON CONTROL DETAILS, CURRENT SWITCHES SHALL BE INSTALLED INDICATED ON CONTROL DETAILS, CURRENT SWITCHES SHALL BE INSTALLED INDICATED ON CONTROL DETAILS, CURRENT SWITCHES SHALL BE INSTALLED ON CONTROL DETAILS, CURRENT SWITCHES SHALL BE INSTALLED ON CONTROL DETAILS, CURRENT SWITCHES SHALL BE INSTALLED CONTROL DETAILS, CURRENT SWITCHES SHALL BE INSTALLED CONTROL DETAILS, CURRENT SWITCHES SHALL BE INSTALLED DETAILS, CURRENT SWITCHES SHALL BE INSTALLED DETAILS, CURRENT SWITCHES SHALL BE INSTALLED CURRENT SWITCHES SHALL BE INSTALLED CURRENT SWITCHES SHALL BE INSTALLED SWITCHES SHALL BE INSTALLED SWITCHES SHALL BE INSTALLED SHALL BE INSTALLED SHALL BE INSTALLED BE INSTALLED BE INSTALLED INSTALLED INSTALLED FOR DDC SYSTEM STATUS INDICATION OF FAN OR PUMP OPERATION. APPROPRIATE DDC SYSTEM STATUS INDICATION OF FAN OR PUMP OPERATION. APPROPRIATE DDC SYSTEM STATUS INDICATION OF FAN OR PUMP OPERATION. APPROPRIATE SYSTEM STATUS INDICATION OF FAN OR PUMP OPERATION. APPROPRIATE SYSTEM STATUS INDICATION OF FAN OR PUMP OPERATION. APPROPRIATE STATUS INDICATION OF FAN OR PUMP OPERATION. APPROPRIATE STATUS INDICATION OF FAN OR PUMP OPERATION. APPROPRIATE INDICATION OF FAN OR PUMP OPERATION. APPROPRIATE INDICATION OF FAN OR PUMP OPERATION. APPROPRIATE OF FAN OR PUMP OPERATION. APPROPRIATE OF FAN OR PUMP OPERATION. APPROPRIATE FAN OR PUMP OPERATION. APPROPRIATE FAN OR PUMP OPERATION. APPROPRIATE OR PUMP OPERATION. APPROPRIATE OR PUMP OPERATION. APPROPRIATE PUMP OPERATION. APPROPRIATE PUMP OPERATION. APPROPRIATE OPERATION. APPROPRIATE OPERATION. APPROPRIATE APPROPRIATE APPROPRIATE APPROPRIATE TIME DELAY FOR STATUS FEEDBACK UPON DDC START AND STOP COMMANDS SHALL DELAY FOR STATUS FEEDBACK UPON DDC START AND STOP COMMANDS SHALL DELAY FOR STATUS FEEDBACK UPON DDC START AND STOP COMMANDS SHALL FOR STATUS FEEDBACK UPON DDC START AND STOP COMMANDS SHALL FOR STATUS FEEDBACK UPON DDC START AND STOP COMMANDS SHALL STATUS FEEDBACK UPON DDC START AND STOP COMMANDS SHALL STATUS FEEDBACK UPON DDC START AND STOP COMMANDS SHALL FEEDBACK UPON DDC START AND STOP COMMANDS SHALL FEEDBACK UPON DDC START AND STOP COMMANDS SHALL UPON DDC START AND STOP COMMANDS SHALL UPON DDC START AND STOP COMMANDS SHALL DDC START AND STOP COMMANDS SHALL DDC START AND STOP COMMANDS SHALL START AND STOP COMMANDS SHALL START AND STOP COMMANDS SHALL AND STOP COMMANDS SHALL AND STOP COMMANDS SHALL STOP COMMANDS SHALL STOP COMMANDS SHALL COMMANDS SHALL COMMANDS SHALL SHALL SHALL BE INCLUDED WITH THE DDC LOGIC TO AVOID NUISANCE OPERATIONAL ALARMS. 2. AS APPLICABLE, CURRENT SWITCH SHALL BE ADJUSTED TO MEET THE CURRENT AS APPLICABLE, CURRENT SWITCH SHALL BE ADJUSTED TO MEET THE CURRENT APPLICABLE, CURRENT SWITCH SHALL BE ADJUSTED TO MEET THE CURRENT APPLICABLE, CURRENT SWITCH SHALL BE ADJUSTED TO MEET THE CURRENT CURRENT SWITCH SHALL BE ADJUSTED TO MEET THE CURRENT CURRENT SWITCH SHALL BE ADJUSTED TO MEET THE CURRENT SWITCH SHALL BE ADJUSTED TO MEET THE CURRENT SWITCH SHALL BE ADJUSTED TO MEET THE CURRENT SHALL BE ADJUSTED TO MEET THE CURRENT SHALL BE ADJUSTED TO MEET THE CURRENT BE ADJUSTED TO MEET THE CURRENT BE ADJUSTED TO MEET THE CURRENT ADJUSTED TO MEET THE CURRENT ADJUSTED TO MEET THE CURRENT TO MEET THE CURRENT TO MEET THE CURRENT MEET THE CURRENT MEET THE CURRENT THE CURRENT THE CURRENT CURRENT CURRENT DRAW REQUIRED TO DETECT FAN BELT LOSS, PUMP COUPLING DETACHMENT, OR VFC REQUIRED TO DETECT FAN BELT LOSS, PUMP COUPLING DETACHMENT, OR VFC REQUIRED TO DETECT FAN BELT LOSS, PUMP COUPLING DETACHMENT, OR VFC TO DETECT FAN BELT LOSS, PUMP COUPLING DETACHMENT, OR VFC TO DETECT FAN BELT LOSS, PUMP COUPLING DETACHMENT, OR VFC DETECT FAN BELT LOSS, PUMP COUPLING DETACHMENT, OR VFC DETECT FAN BELT LOSS, PUMP COUPLING DETACHMENT, OR VFC FAN BELT LOSS, PUMP COUPLING DETACHMENT, OR VFC FAN BELT LOSS, PUMP COUPLING DETACHMENT, OR VFC BELT LOSS, PUMP COUPLING DETACHMENT, OR VFC BELT LOSS, PUMP COUPLING DETACHMENT, OR VFC LOSS, PUMP COUPLING DETACHMENT, OR VFC LOSS, PUMP COUPLING DETACHMENT, OR VFC PUMP COUPLING DETACHMENT, OR VFC PUMP COUPLING DETACHMENT, OR VFC COUPLING DETACHMENT, OR VFC COUPLING DETACHMENT, OR VFC DETACHMENT, OR VFC DETACHMENT, OR VFC OR VFC OR VFC VFC VFC LOSS. 3. WHEN FAN OR PUMP IS ON AND NOT IN ALARM, DDC SYSTEM SHALL TOTALIZE RUN WHEN FAN OR PUMP IS ON AND NOT IN ALARM, DDC SYSTEM SHALL TOTALIZE RUN FAN OR PUMP IS ON AND NOT IN ALARM, DDC SYSTEM SHALL TOTALIZE RUN FAN OR PUMP IS ON AND NOT IN ALARM, DDC SYSTEM SHALL TOTALIZE RUN OR PUMP IS ON AND NOT IN ALARM, DDC SYSTEM SHALL TOTALIZE RUN OR PUMP IS ON AND NOT IN ALARM, DDC SYSTEM SHALL TOTALIZE RUN PUMP IS ON AND NOT IN ALARM, DDC SYSTEM SHALL TOTALIZE RUN PUMP IS ON AND NOT IN ALARM, DDC SYSTEM SHALL TOTALIZE RUN IS ON AND NOT IN ALARM, DDC SYSTEM SHALL TOTALIZE RUN IS ON AND NOT IN ALARM, DDC SYSTEM SHALL TOTALIZE RUN ON AND NOT IN ALARM, DDC SYSTEM SHALL TOTALIZE RUN ON AND NOT IN ALARM, DDC SYSTEM SHALL TOTALIZE RUN AND NOT IN ALARM, DDC SYSTEM SHALL TOTALIZE RUN AND NOT IN ALARM, DDC SYSTEM SHALL TOTALIZE RUN NOT IN ALARM, DDC SYSTEM SHALL TOTALIZE RUN NOT IN ALARM, DDC SYSTEM SHALL TOTALIZE RUN IN ALARM, DDC SYSTEM SHALL TOTALIZE RUN IN ALARM, DDC SYSTEM SHALL TOTALIZE RUN ALARM, DDC SYSTEM SHALL TOTALIZE RUN ALARM, DDC SYSTEM SHALL TOTALIZE RUN DDC SYSTEM SHALL TOTALIZE RUN DDC SYSTEM SHALL TOTALIZE RUN SYSTEM SHALL TOTALIZE RUN SYSTEM SHALL TOTALIZE RUN SHALL TOTALIZE RUN SHALL TOTALIZE RUN TOTALIZE RUN TOTALIZE RUN RUN RUN TIME HOURS FOR OPERATOR INFORMATION FROM BUILDING AUTOMATION SYSTEM HOURS FOR OPERATOR INFORMATION FROM BUILDING AUTOMATION SYSTEM HOURS FOR OPERATOR INFORMATION FROM BUILDING AUTOMATION SYSTEM FOR OPERATOR INFORMATION FROM BUILDING AUTOMATION SYSTEM FOR OPERATOR INFORMATION FROM BUILDING AUTOMATION SYSTEM OPERATOR INFORMATION FROM BUILDING AUTOMATION SYSTEM OPERATOR INFORMATION FROM BUILDING AUTOMATION SYSTEM INFORMATION FROM BUILDING AUTOMATION SYSTEM INFORMATION FROM BUILDING AUTOMATION SYSTEM FROM BUILDING AUTOMATION SYSTEM FROM BUILDING AUTOMATION SYSTEM BUILDING AUTOMATION SYSTEM BUILDING AUTOMATION SYSTEM AUTOMATION SYSTEM AUTOMATION SYSTEM SYSTEM SYSTEM OPERATOR INTERFACE.

AutoCAD SHX Text

TO DDC CONTROLLER

AutoCAD SHX Text

LOCATE AND SECURE CURRENT SENSING DEVICE IN MOTOR CONTROL HOUSING. IF SPACE IS NOT AVAILABLE, LOCATE IN DISCONNECT HOUSING OR PROVIDE SEPARATE ENCLOSURE.

AutoCAD SHX Text

LINE VOLTAGE

AutoCAD SHX Text

MOTOR STARTER HOUSING

AutoCAD SHX Text

POWER TO MOTOR

AutoCAD SHX Text

1. THESE GENERAL NOTES SHALL BE APPLICABLE FOR ALL TEMPERATURE CONTROL (TC) THESE GENERAL NOTES SHALL BE APPLICABLE FOR ALL TEMPERATURE CONTROL (TC) GENERAL NOTES SHALL BE APPLICABLE FOR ALL TEMPERATURE CONTROL (TC) GENERAL NOTES SHALL BE APPLICABLE FOR ALL TEMPERATURE CONTROL (TC) NOTES SHALL BE APPLICABLE FOR ALL TEMPERATURE CONTROL (TC) NOTES SHALL BE APPLICABLE FOR ALL TEMPERATURE CONTROL (TC) SHALL BE APPLICABLE FOR ALL TEMPERATURE CONTROL (TC) SHALL BE APPLICABLE FOR ALL TEMPERATURE CONTROL (TC) BE APPLICABLE FOR ALL TEMPERATURE CONTROL (TC) BE APPLICABLE FOR ALL TEMPERATURE CONTROL (TC) APPLICABLE FOR ALL TEMPERATURE CONTROL (TC) APPLICABLE FOR ALL TEMPERATURE CONTROL (TC) FOR ALL TEMPERATURE CONTROL (TC) FOR ALL TEMPERATURE CONTROL (TC) ALL TEMPERATURE CONTROL (TC) ALL TEMPERATURE CONTROL (TC) TEMPERATURE CONTROL (TC) TEMPERATURE CONTROL (TC) CONTROL (TC) CONTROL (TC) (TC) (TC) DRAWINGS. 2. "PROVIDE" IS DEFINED AS “FURNISH AND INSTALL". "PROVIDE" IS DEFINED AS “FURNISH AND INSTALL". FURNISH AND INSTALL". 3. TEMPERATURE CONTROLS CONTRACTOR (TC CONTRACTOR) SHALL BE RESPONSIBLE TO TEMPERATURE CONTROLS CONTRACTOR (TC CONTRACTOR) SHALL BE RESPONSIBLE TO CONTROLS CONTRACTOR (TC CONTRACTOR) SHALL BE RESPONSIBLE TO CONTROLS CONTRACTOR (TC CONTRACTOR) SHALL BE RESPONSIBLE TO CONTRACTOR (TC CONTRACTOR) SHALL BE RESPONSIBLE TO CONTRACTOR (TC CONTRACTOR) SHALL BE RESPONSIBLE TO (TC CONTRACTOR) SHALL BE RESPONSIBLE TO (TC CONTRACTOR) SHALL BE RESPONSIBLE TO CONTRACTOR) SHALL BE RESPONSIBLE TO CONTRACTOR) SHALL BE RESPONSIBLE TO SHALL BE RESPONSIBLE TO SHALL BE RESPONSIBLE TO BE RESPONSIBLE TO BE RESPONSIBLE TO RESPONSIBLE TO RESPONSIBLE TO TO TO COMPLY WITH ALL APPLICABLE CODES AND STANDARDS. 4. FOR TEMPERATURE CONTROL DRAWINGS ONLY: ALL DETAILED INFORMATION IDENTIFIED FOR TEMPERATURE CONTROL DRAWINGS ONLY: ALL DETAILED INFORMATION IDENTIFIED TEMPERATURE CONTROL DRAWINGS ONLY: ALL DETAILED INFORMATION IDENTIFIED TEMPERATURE CONTROL DRAWINGS ONLY: ALL DETAILED INFORMATION IDENTIFIED CONTROL DRAWINGS ONLY: ALL DETAILED INFORMATION IDENTIFIED CONTROL DRAWINGS ONLY: ALL DETAILED INFORMATION IDENTIFIED DRAWINGS ONLY: ALL DETAILED INFORMATION IDENTIFIED DRAWINGS ONLY: ALL DETAILED INFORMATION IDENTIFIED ONLY: ALL DETAILED INFORMATION IDENTIFIED ONLY: ALL DETAILED INFORMATION IDENTIFIED ALL DETAILED INFORMATION IDENTIFIED ALL DETAILED INFORMATION IDENTIFIED ALL DETAILED INFORMATION IDENTIFIED DETAILED INFORMATION IDENTIFIED DETAILED INFORMATION IDENTIFIED INFORMATION IDENTIFIED INFORMATION IDENTIFIED IDENTIFIED IDENTIFIED WITH HEAVY LINE WEIGHT SHALL BE PROVIDED BY TC CONTRACTOR. ALL OTHER HEAVY LINE WEIGHT SHALL BE PROVIDED BY TC CONTRACTOR. ALL OTHER HEAVY LINE WEIGHT SHALL BE PROVIDED BY TC CONTRACTOR. ALL OTHER LINE WEIGHT SHALL BE PROVIDED BY TC CONTRACTOR. ALL OTHER LINE WEIGHT SHALL BE PROVIDED BY TC CONTRACTOR. ALL OTHER WEIGHT SHALL BE PROVIDED BY TC CONTRACTOR. ALL OTHER WEIGHT SHALL BE PROVIDED BY TC CONTRACTOR. ALL OTHER SHALL BE PROVIDED BY TC CONTRACTOR. ALL OTHER SHALL BE PROVIDED BY TC CONTRACTOR. ALL OTHER BE PROVIDED BY TC CONTRACTOR. ALL OTHER BE PROVIDED BY TC CONTRACTOR. ALL OTHER PROVIDED BY TC CONTRACTOR. ALL OTHER PROVIDED BY TC CONTRACTOR. ALL OTHER BY TC CONTRACTOR. ALL OTHER BY TC CONTRACTOR. ALL OTHER TC CONTRACTOR. ALL OTHER TC CONTRACTOR. ALL OTHER CONTRACTOR. ALL OTHER CONTRACTOR. ALL OTHER ALL OTHER ALL OTHER ALL OTHER OTHER OTHER INFORMATION IDENTIFIED WITH LIGHT LINE WEIGHT SHALL BE PROVIDED BY OTHER IDENTIFIED WITH LIGHT LINE WEIGHT SHALL BE PROVIDED BY OTHER IDENTIFIED WITH LIGHT LINE WEIGHT SHALL BE PROVIDED BY OTHER WITH LIGHT LINE WEIGHT SHALL BE PROVIDED BY OTHER WITH LIGHT LINE WEIGHT SHALL BE PROVIDED BY OTHER LIGHT LINE WEIGHT SHALL BE PROVIDED BY OTHER LIGHT LINE WEIGHT SHALL BE PROVIDED BY OTHER LINE WEIGHT SHALL BE PROVIDED BY OTHER LINE WEIGHT SHALL BE PROVIDED BY OTHER WEIGHT SHALL BE PROVIDED BY OTHER WEIGHT SHALL BE PROVIDED BY OTHER SHALL BE PROVIDED BY OTHER SHALL BE PROVIDED BY OTHER BE PROVIDED BY OTHER BE PROVIDED BY OTHER PROVIDED BY OTHER PROVIDED BY OTHER BY OTHER BY OTHER OTHER OTHER TRADES. 5. ALL CONTROL SCHEMATICS AND WIRING DIAGRAMS ARE FOR THE CLARIFICATION OF ALL CONTROL SCHEMATICS AND WIRING DIAGRAMS ARE FOR THE CLARIFICATION OF CONTROL SCHEMATICS AND WIRING DIAGRAMS ARE FOR THE CLARIFICATION OF CONTROL SCHEMATICS AND WIRING DIAGRAMS ARE FOR THE CLARIFICATION OF SCHEMATICS AND WIRING DIAGRAMS ARE FOR THE CLARIFICATION OF SCHEMATICS AND WIRING DIAGRAMS ARE FOR THE CLARIFICATION OF AND WIRING DIAGRAMS ARE FOR THE CLARIFICATION OF AND WIRING DIAGRAMS ARE FOR THE CLARIFICATION OF WIRING DIAGRAMS ARE FOR THE CLARIFICATION OF WIRING DIAGRAMS ARE FOR THE CLARIFICATION OF DIAGRAMS ARE FOR THE CLARIFICATION OF DIAGRAMS ARE FOR THE CLARIFICATION OF ARE FOR THE CLARIFICATION OF ARE FOR THE CLARIFICATION OF FOR THE CLARIFICATION OF FOR THE CLARIFICATION OF THE CLARIFICATION OF THE CLARIFICATION OF CLARIFICATION OF CLARIFICATION OF OF OF EQUIPMENT INTERLOCKING FUNCTIONS AND THE INTERFACE OF VARIOUS CONTRACTORS' INTERLOCKING FUNCTIONS AND THE INTERFACE OF VARIOUS CONTRACTORS' INTERLOCKING FUNCTIONS AND THE INTERFACE OF VARIOUS CONTRACTORS' FUNCTIONS AND THE INTERFACE OF VARIOUS CONTRACTORS' FUNCTIONS AND THE INTERFACE OF VARIOUS CONTRACTORS' AND THE INTERFACE OF VARIOUS CONTRACTORS' AND THE INTERFACE OF VARIOUS CONTRACTORS' THE INTERFACE OF VARIOUS CONTRACTORS' THE INTERFACE OF VARIOUS CONTRACTORS' INTERFACE OF VARIOUS CONTRACTORS' INTERFACE OF VARIOUS CONTRACTORS' OF VARIOUS CONTRACTORS' OF VARIOUS CONTRACTORS' VARIOUS CONTRACTORS' VARIOUS CONTRACTORS' CONTRACTORS' CONTRACTORS' WORK AND SHALL NOT BE MISTAKEN AS SHOP DRAWINGS FOR ACTUAL INSTALLATION. 6. TC CONTRACTOR SHALL PROVIDE DDC CONTROLLERS AS REQUIRED TO MEET INTENT OF TC CONTRACTOR SHALL PROVIDE DDC CONTROLLERS AS REQUIRED TO MEET INTENT OF CONTRACTOR SHALL PROVIDE DDC CONTROLLERS AS REQUIRED TO MEET INTENT OF CONTRACTOR SHALL PROVIDE DDC CONTROLLERS AS REQUIRED TO MEET INTENT OF SHALL PROVIDE DDC CONTROLLERS AS REQUIRED TO MEET INTENT OF SHALL PROVIDE DDC CONTROLLERS AS REQUIRED TO MEET INTENT OF PROVIDE DDC CONTROLLERS AS REQUIRED TO MEET INTENT OF PROVIDE DDC CONTROLLERS AS REQUIRED TO MEET INTENT OF DDC CONTROLLERS AS REQUIRED TO MEET INTENT OF DDC CONTROLLERS AS REQUIRED TO MEET INTENT OF CONTROLLERS AS REQUIRED TO MEET INTENT OF CONTROLLERS AS REQUIRED TO MEET INTENT OF AS REQUIRED TO MEET INTENT OF AS REQUIRED TO MEET INTENT OF REQUIRED TO MEET INTENT OF REQUIRED TO MEET INTENT OF TO MEET INTENT OF TO MEET INTENT OF MEET INTENT OF MEET INTENT OF INTENT OF INTENT OF OF OF DESIGN DOCUMENTS. REFER TO THE PLANS FOR THE DDC FUNCTIONS THAT APPLY DOCUMENTS. REFER TO THE PLANS FOR THE DDC FUNCTIONS THAT APPLY DOCUMENTS. REFER TO THE PLANS FOR THE DDC FUNCTIONS THAT APPLY REFER TO THE PLANS FOR THE DDC FUNCTIONS THAT APPLY REFER TO THE PLANS FOR THE DDC FUNCTIONS THAT APPLY REFER TO THE PLANS FOR THE DDC FUNCTIONS THAT APPLY TO THE PLANS FOR THE DDC FUNCTIONS THAT APPLY TO THE PLANS FOR THE DDC FUNCTIONS THAT APPLY THE PLANS FOR THE DDC FUNCTIONS THAT APPLY THE PLANS FOR THE DDC FUNCTIONS THAT APPLY PLANS FOR THE DDC FUNCTIONS THAT APPLY PLANS FOR THE DDC FUNCTIONS THAT APPLY FOR THE DDC FUNCTIONS THAT APPLY FOR THE DDC FUNCTIONS THAT APPLY THE DDC FUNCTIONS THAT APPLY THE DDC FUNCTIONS THAT APPLY DDC FUNCTIONS THAT APPLY DDC FUNCTIONS THAT APPLY FUNCTIONS THAT APPLY FUNCTIONS THAT APPLY THAT APPLY THAT APPLY APPLY APPLY TO EACH MECHANICAL SYSTEM. 7. ALL TC PROVIDED COMPONENTS AND ALL TC CONTRACTOR INSTALLED WIRING SHALL ALL TC PROVIDED COMPONENTS AND ALL TC CONTRACTOR INSTALLED WIRING SHALL TC PROVIDED COMPONENTS AND ALL TC CONTRACTOR INSTALLED WIRING SHALL TC PROVIDED COMPONENTS AND ALL TC CONTRACTOR INSTALLED WIRING SHALL PROVIDED COMPONENTS AND ALL TC CONTRACTOR INSTALLED WIRING SHALL PROVIDED COMPONENTS AND ALL TC CONTRACTOR INSTALLED WIRING SHALL COMPONENTS AND ALL TC CONTRACTOR INSTALLED WIRING SHALL COMPONENTS AND ALL TC CONTRACTOR INSTALLED WIRING SHALL AND ALL TC CONTRACTOR INSTALLED WIRING SHALL AND ALL TC CONTRACTOR INSTALLED WIRING SHALL ALL TC CONTRACTOR INSTALLED WIRING SHALL ALL TC CONTRACTOR INSTALLED WIRING SHALL TC CONTRACTOR INSTALLED WIRING SHALL TC CONTRACTOR INSTALLED WIRING SHALL CONTRACTOR INSTALLED WIRING SHALL CONTRACTOR INSTALLED WIRING SHALL INSTALLED WIRING SHALL INSTALLED WIRING SHALL WIRING SHALL WIRING SHALL SHALL SHALL BE LABELED PER SPECIFICATIONS. 8. ALL WIRING AND SYSTEM CONTROL VOLTAGES SHALL BE IN ACCORDANCE WITH THE ALL WIRING AND SYSTEM CONTROL VOLTAGES SHALL BE IN ACCORDANCE WITH THE WIRING AND SYSTEM CONTROL VOLTAGES SHALL BE IN ACCORDANCE WITH THE WIRING AND SYSTEM CONTROL VOLTAGES SHALL BE IN ACCORDANCE WITH THE AND SYSTEM CONTROL VOLTAGES SHALL BE IN ACCORDANCE WITH THE AND SYSTEM CONTROL VOLTAGES SHALL BE IN ACCORDANCE WITH THE SYSTEM CONTROL VOLTAGES SHALL BE IN ACCORDANCE WITH THE SYSTEM CONTROL VOLTAGES SHALL BE IN ACCORDANCE WITH THE CONTROL VOLTAGES SHALL BE IN ACCORDANCE WITH THE CONTROL VOLTAGES SHALL BE IN ACCORDANCE WITH THE VOLTAGES SHALL BE IN ACCORDANCE WITH THE VOLTAGES SHALL BE IN ACCORDANCE WITH THE SHALL BE IN ACCORDANCE WITH THE SHALL BE IN ACCORDANCE WITH THE BE IN ACCORDANCE WITH THE BE IN ACCORDANCE WITH THE IN ACCORDANCE WITH THE IN ACCORDANCE WITH THE ACCORDANCE WITH THE ACCORDANCE WITH THE WITH THE WITH THE THE THE EQUIPMENT MANUFACTURER'S RECOMMENDATION AND THE ELECTRICAL SPECIFICATIONS. 9. VARIABLE FREQUENCY CONTROLLER, FAN AND PUMP MOTOR STARTERS, STARTER VARIABLE FREQUENCY CONTROLLER, FAN AND PUMP MOTOR STARTERS, STARTER FREQUENCY CONTROLLER, FAN AND PUMP MOTOR STARTERS, STARTER FREQUENCY CONTROLLER, FAN AND PUMP MOTOR STARTERS, STARTER CONTROLLER, FAN AND PUMP MOTOR STARTERS, STARTER CONTROLLER, FAN AND PUMP MOTOR STARTERS, STARTER FAN AND PUMP MOTOR STARTERS, STARTER FAN AND PUMP MOTOR STARTERS, STARTER AND PUMP MOTOR STARTERS, STARTER AND PUMP MOTOR STARTERS, STARTER PUMP MOTOR STARTERS, STARTER PUMP MOTOR STARTERS, STARTER MOTOR STARTERS, STARTER MOTOR STARTERS, STARTER STARTERS, STARTER STARTERS, STARTER STARTER STARTER WIRING, CONTROL VOLTAGE TRANSFORMERS AND ASSOCIATED POWER WIRING SHALL BE CONTROL VOLTAGE TRANSFORMERS AND ASSOCIATED POWER WIRING SHALL BE CONTROL VOLTAGE TRANSFORMERS AND ASSOCIATED POWER WIRING SHALL BE VOLTAGE TRANSFORMERS AND ASSOCIATED POWER WIRING SHALL BE VOLTAGE TRANSFORMERS AND ASSOCIATED POWER WIRING SHALL BE TRANSFORMERS AND ASSOCIATED POWER WIRING SHALL BE TRANSFORMERS AND ASSOCIATED POWER WIRING SHALL BE AND ASSOCIATED POWER WIRING SHALL BE AND ASSOCIATED POWER WIRING SHALL BE ASSOCIATED POWER WIRING SHALL BE ASSOCIATED POWER WIRING SHALL BE POWER WIRING SHALL BE POWER WIRING SHALL BE WIRING SHALL BE WIRING SHALL BE SHALL BE SHALL BE BE BE PROVIDED BY OTHER TRADES. 10. DUCT SMOKE DETECTORS SHALL BE FURNISHED, INSTALLED AND WIRED TO THE FIRE DUCT SMOKE DETECTORS SHALL BE FURNISHED, INSTALLED AND WIRED TO THE FIRE SMOKE DETECTORS SHALL BE FURNISHED, INSTALLED AND WIRED TO THE FIRE SMOKE DETECTORS SHALL BE FURNISHED, INSTALLED AND WIRED TO THE FIRE DETECTORS SHALL BE FURNISHED, INSTALLED AND WIRED TO THE FIRE DETECTORS SHALL BE FURNISHED, INSTALLED AND WIRED TO THE FIRE SHALL BE FURNISHED, INSTALLED AND WIRED TO THE FIRE SHALL BE FURNISHED, INSTALLED AND WIRED TO THE FIRE BE FURNISHED, INSTALLED AND WIRED TO THE FIRE BE FURNISHED, INSTALLED AND WIRED TO THE FIRE FURNISHED, INSTALLED AND WIRED TO THE FIRE FURNISHED, INSTALLED AND WIRED TO THE FIRE INSTALLED AND WIRED TO THE FIRE INSTALLED AND WIRED TO THE FIRE AND WIRED TO THE FIRE AND WIRED TO THE FIRE WIRED TO THE FIRE WIRED TO THE FIRE TO THE FIRE TO THE FIRE THE FIRE THE FIRE FIRE FIRE ALARM SYSTEM BY THE ELECTRICAL CONTRACTOR. ELECTRICAL SHALL PROVIDE FIRE SYSTEM BY THE ELECTRICAL CONTRACTOR. ELECTRICAL SHALL PROVIDE FIRE SYSTEM BY THE ELECTRICAL CONTRACTOR. ELECTRICAL SHALL PROVIDE FIRE BY THE ELECTRICAL CONTRACTOR. ELECTRICAL SHALL PROVIDE FIRE BY THE ELECTRICAL CONTRACTOR. ELECTRICAL SHALL PROVIDE FIRE THE ELECTRICAL CONTRACTOR. ELECTRICAL SHALL PROVIDE FIRE THE ELECTRICAL CONTRACTOR. ELECTRICAL SHALL PROVIDE FIRE ELECTRICAL CONTRACTOR. ELECTRICAL SHALL PROVIDE FIRE ELECTRICAL CONTRACTOR. ELECTRICAL SHALL PROVIDE FIRE CONTRACTOR. ELECTRICAL SHALL PROVIDE FIRE CONTRACTOR. ELECTRICAL SHALL PROVIDE FIRE ELECTRICAL SHALL PROVIDE FIRE ELECTRICAL SHALL PROVIDE FIRE ELECTRICAL SHALL PROVIDE FIRE SHALL PROVIDE FIRE SHALL PROVIDE FIRE PROVIDE FIRE PROVIDE FIRE FIRE FIRE ALARM SYSTEM CONTROL MODULES FOR REQUIRED SAFETIES TO MOTOR STARTERS OR SYSTEM CONTROL MODULES FOR REQUIRED SAFETIES TO MOTOR STARTERS OR SYSTEM CONTROL MODULES FOR REQUIRED SAFETIES TO MOTOR STARTERS OR CONTROL MODULES FOR REQUIRED SAFETIES TO MOTOR STARTERS OR CONTROL MODULES FOR REQUIRED SAFETIES TO MOTOR STARTERS OR MODULES FOR REQUIRED SAFETIES TO MOTOR STARTERS OR MODULES FOR REQUIRED SAFETIES TO MOTOR STARTERS OR FOR REQUIRED SAFETIES TO MOTOR STARTERS OR FOR REQUIRED SAFETIES TO MOTOR STARTERS OR REQUIRED SAFETIES TO MOTOR STARTERS OR REQUIRED SAFETIES TO MOTOR STARTERS OR SAFETIES TO MOTOR STARTERS OR SAFETIES TO MOTOR STARTERS OR TO MOTOR STARTERS OR TO MOTOR STARTERS OR MOTOR STARTERS OR MOTOR STARTERS OR STARTERS OR STARTERS OR OR OR VFC'S AS INDICATED. CONTROL MODULES SHALL BE LOCATED NEAR RESPECTIVE MOTOR AS INDICATED. CONTROL MODULES SHALL BE LOCATED NEAR RESPECTIVE MOTOR AS INDICATED. CONTROL MODULES SHALL BE LOCATED NEAR RESPECTIVE MOTOR INDICATED. CONTROL MODULES SHALL BE LOCATED NEAR RESPECTIVE MOTOR INDICATED. CONTROL MODULES SHALL BE LOCATED NEAR RESPECTIVE MOTOR CONTROL MODULES SHALL BE LOCATED NEAR RESPECTIVE MOTOR CONTROL MODULES SHALL BE LOCATED NEAR RESPECTIVE MOTOR MODULES SHALL BE LOCATED NEAR RESPECTIVE MOTOR MODULES SHALL BE LOCATED NEAR RESPECTIVE MOTOR SHALL BE LOCATED NEAR RESPECTIVE MOTOR SHALL BE LOCATED NEAR RESPECTIVE MOTOR BE LOCATED NEAR RESPECTIVE MOTOR BE LOCATED NEAR RESPECTIVE MOTOR LOCATED NEAR RESPECTIVE MOTOR LOCATED NEAR RESPECTIVE MOTOR NEAR RESPECTIVE MOTOR NEAR RESPECTIVE MOTOR RESPECTIVE MOTOR RESPECTIVE MOTOR MOTOR MOTOR STARTERS OR VFCs. TC CONTRACTOR SHALL PROVIDE INTERLOCK WIRING FROM OR VFCs. TC CONTRACTOR SHALL PROVIDE INTERLOCK WIRING FROM OR VFCs. TC CONTRACTOR SHALL PROVIDE INTERLOCK WIRING FROM VFCs. TC CONTRACTOR SHALL PROVIDE INTERLOCK WIRING FROM VFCs. TC CONTRACTOR SHALL PROVIDE INTERLOCK WIRING FROM TC CONTRACTOR SHALL PROVIDE INTERLOCK WIRING FROM TC CONTRACTOR SHALL PROVIDE INTERLOCK WIRING FROM CONTRACTOR SHALL PROVIDE INTERLOCK WIRING FROM CONTRACTOR SHALL PROVIDE INTERLOCK WIRING FROM SHALL PROVIDE INTERLOCK WIRING FROM SHALL PROVIDE INTERLOCK WIRING FROM PROVIDE INTERLOCK WIRING FROM PROVIDE INTERLOCK WIRING FROM INTERLOCK WIRING FROM INTERLOCK WIRING FROM WIRING FROM WIRING FROM FROM FROM CONTROL MODULES TO MOTOR STARTERS OR VFCs. 11. ALL DDC AND CONTROL INTERLOCK WIRING SHALL BE BY TC CONTRACTOR UNLESS ALL DDC AND CONTROL INTERLOCK WIRING SHALL BE BY TC CONTRACTOR UNLESS DDC AND CONTROL INTERLOCK WIRING SHALL BE BY TC CONTRACTOR UNLESS DDC AND CONTROL INTERLOCK WIRING SHALL BE BY TC CONTRACTOR UNLESS AND CONTROL INTERLOCK WIRING SHALL BE BY TC CONTRACTOR UNLESS AND CONTROL INTERLOCK WIRING SHALL BE BY TC CONTRACTOR UNLESS CONTROL INTERLOCK WIRING SHALL BE BY TC CONTRACTOR UNLESS CONTROL INTERLOCK WIRING SHALL BE BY TC CONTRACTOR UNLESS INTERLOCK WIRING SHALL BE BY TC CONTRACTOR UNLESS INTERLOCK WIRING SHALL BE BY TC CONTRACTOR UNLESS WIRING SHALL BE BY TC CONTRACTOR UNLESS WIRING SHALL BE BY TC CONTRACTOR UNLESS SHALL BE BY TC CONTRACTOR UNLESS SHALL BE BY TC CONTRACTOR UNLESS BE BY TC CONTRACTOR UNLESS BE BY TC CONTRACTOR UNLESS BY TC CONTRACTOR UNLESS BY TC CONTRACTOR UNLESS TC CONTRACTOR UNLESS TC CONTRACTOR UNLESS CONTRACTOR UNLESS CONTRACTOR UNLESS UNLESS UNLESS OTHERWISE NOTED. TC CONTRACTOR SHALL COORDINATE WITH VFC AND MOTOR NOTED. TC CONTRACTOR SHALL COORDINATE WITH VFC AND MOTOR NOTED. TC CONTRACTOR SHALL COORDINATE WITH VFC AND MOTOR TC CONTRACTOR SHALL COORDINATE WITH VFC AND MOTOR TC CONTRACTOR SHALL COORDINATE WITH VFC AND MOTOR CONTRACTOR SHALL COORDINATE WITH VFC AND MOTOR CONTRACTOR SHALL COORDINATE WITH VFC AND MOTOR SHALL COORDINATE WITH VFC AND MOTOR SHALL COORDINATE WITH VFC AND MOTOR COORDINATE WITH VFC AND MOTOR COORDINATE WITH VFC AND MOTOR WITH VFC AND MOTOR WITH VFC AND MOTOR VFC AND MOTOR VFC AND MOTOR AND MOTOR AND MOTOR MOTOR MOTOR STARTER SUPPLIERS TO DETERMINE EXACT WIRING REQUIREMENTS AND TERMINATION SUPPLIERS TO DETERMINE EXACT WIRING REQUIREMENTS AND TERMINATION SUPPLIERS TO DETERMINE EXACT WIRING REQUIREMENTS AND TERMINATION TO DETERMINE EXACT WIRING REQUIREMENTS AND TERMINATION TO DETERMINE EXACT WIRING REQUIREMENTS AND TERMINATION DETERMINE EXACT WIRING REQUIREMENTS AND TERMINATION DETERMINE EXACT WIRING REQUIREMENTS AND TERMINATION EXACT WIRING REQUIREMENTS AND TERMINATION EXACT WIRING REQUIREMENTS AND TERMINATION WIRING REQUIREMENTS AND TERMINATION WIRING REQUIREMENTS AND TERMINATION REQUIREMENTS AND TERMINATION REQUIREMENTS AND TERMINATION AND TERMINATION AND TERMINATION TERMINATION TERMINATION POINTS. 12. ALL DDC AND CONTROL INTERLOCK WIRING BETWEEN COMPONENTS SHALL BE ALL DDC AND CONTROL INTERLOCK WIRING BETWEEN COMPONENTS SHALL BE DDC AND CONTROL INTERLOCK WIRING BETWEEN COMPONENTS SHALL BE DDC AND CONTROL INTERLOCK WIRING BETWEEN COMPONENTS SHALL BE AND CONTROL INTERLOCK WIRING BETWEEN COMPONENTS SHALL BE AND CONTROL INTERLOCK WIRING BETWEEN COMPONENTS SHALL BE CONTROL INTERLOCK WIRING BETWEEN COMPONENTS SHALL BE CONTROL INTERLOCK WIRING BETWEEN COMPONENTS SHALL BE INTERLOCK WIRING BETWEEN COMPONENTS SHALL BE INTERLOCK WIRING BETWEEN COMPONENTS SHALL BE WIRING BETWEEN COMPONENTS SHALL BE WIRING BETWEEN COMPONENTS SHALL BE BETWEEN COMPONENTS SHALL BE BETWEEN COMPONENTS SHALL BE COMPONENTS SHALL BE COMPONENTS SHALL BE SHALL BE SHALL BE BE BE INSTALLED WITHOUT INTERMEDIATE STOPS. WIRE SPLICING AT INTERMEDIATE TERMINAL WITHOUT INTERMEDIATE STOPS. WIRE SPLICING AT INTERMEDIATE TERMINAL WITHOUT INTERMEDIATE STOPS. WIRE SPLICING AT INTERMEDIATE TERMINAL INTERMEDIATE STOPS. WIRE SPLICING AT INTERMEDIATE TERMINAL INTERMEDIATE STOPS. WIRE SPLICING AT INTERMEDIATE TERMINAL STOPS. WIRE SPLICING AT INTERMEDIATE TERMINAL STOPS. WIRE SPLICING AT INTERMEDIATE TERMINAL WIRE SPLICING AT INTERMEDIATE TERMINAL WIRE SPLICING AT INTERMEDIATE TERMINAL WIRE SPLICING AT INTERMEDIATE TERMINAL SPLICING AT INTERMEDIATE TERMINAL SPLICING AT INTERMEDIATE TERMINAL AT INTERMEDIATE TERMINAL AT INTERMEDIATE TERMINAL INTERMEDIATE TERMINAL INTERMEDIATE TERMINAL TERMINAL TERMINAL STRIPS IS NOT ACCEPTABLE. 13. ALL ELECTRICAL WIRING AND RACEWAY SYSTEMS SHALL COMPLY WITH ELECTRICAL ALL ELECTRICAL WIRING AND RACEWAY SYSTEMS SHALL COMPLY WITH ELECTRICAL ELECTRICAL WIRING AND RACEWAY SYSTEMS SHALL COMPLY WITH ELECTRICAL ELECTRICAL WIRING AND RACEWAY SYSTEMS SHALL COMPLY WITH ELECTRICAL WIRING AND RACEWAY SYSTEMS SHALL COMPLY WITH ELECTRICAL WIRING AND RACEWAY SYSTEMS SHALL COMPLY WITH ELECTRICAL AND RACEWAY SYSTEMS SHALL COMPLY WITH ELECTRICAL AND RACEWAY SYSTEMS SHALL COMPLY WITH ELECTRICAL RACEWAY SYSTEMS SHALL COMPLY WITH ELECTRICAL RACEWAY SYSTEMS SHALL COMPLY WITH ELECTRICAL SYSTEMS SHALL COMPLY WITH ELECTRICAL SYSTEMS SHALL COMPLY WITH ELECTRICAL SHALL COMPLY WITH ELECTRICAL SHALL COMPLY WITH ELECTRICAL COMPLY WITH ELECTRICAL COMPLY WITH ELECTRICAL WITH ELECTRICAL WITH ELECTRICAL ELECTRICAL ELECTRICAL SPECIFICATION REQUIREMENTS. WHERE RACEWAY IS REQUIRED, TWO SEPARATE REQUIREMENTS. WHERE RACEWAY IS REQUIRED, TWO SEPARATE REQUIREMENTS. WHERE RACEWAY IS REQUIRED, TWO SEPARATE WHERE RACEWAY IS REQUIRED, TWO SEPARATE WHERE RACEWAY IS REQUIRED, TWO SEPARATE RACEWAY IS REQUIRED, TWO SEPARATE RACEWAY IS REQUIRED, TWO SEPARATE IS REQUIRED, TWO SEPARATE IS REQUIRED, TWO SEPARATE REQUIRED, TWO SEPARATE REQUIRED, TWO SEPARATE TWO SEPARATE TWO SEPARATE SEPARATE SEPARATE ELECTRICAL RACEWAY SYSTEMS SHALL BE PROVIDED: ONE FOR 120V WIRING AND RACEWAY SYSTEMS SHALL BE PROVIDED: ONE FOR 120V WIRING AND RACEWAY SYSTEMS SHALL BE PROVIDED: ONE FOR 120V WIRING AND SYSTEMS SHALL BE PROVIDED: ONE FOR 120V WIRING AND SYSTEMS SHALL BE PROVIDED: ONE FOR 120V WIRING AND SHALL BE PROVIDED: ONE FOR 120V WIRING AND SHALL BE PROVIDED: ONE FOR 120V WIRING AND BE PROVIDED: ONE FOR 120V WIRING AND BE PROVIDED: ONE FOR 120V WIRING AND PROVIDED: ONE FOR 120V WIRING AND PROVIDED: ONE FOR 120V WIRING AND ONE FOR 120V WIRING AND ONE FOR 120V WIRING AND ONE FOR 120V WIRING AND FOR 120V WIRING AND FOR 120V WIRING AND 120V WIRING AND 120V WIRING AND WIRING AND WIRING AND AND AND THE OTHER FOR 24V WIRING. 14. TC CONTRACTOR SHALL BE RESPONSIBLE FOR ALL POWER SUPPLIES REQUIRED FOR TC TC CONTRACTOR SHALL BE RESPONSIBLE FOR ALL POWER SUPPLIES REQUIRED FOR TC CONTRACTOR SHALL BE RESPONSIBLE FOR ALL POWER SUPPLIES REQUIRED FOR TC CONTRACTOR SHALL BE RESPONSIBLE FOR ALL POWER SUPPLIES REQUIRED FOR TC SHALL BE RESPONSIBLE FOR ALL POWER SUPPLIES REQUIRED FOR TC SHALL BE RESPONSIBLE FOR ALL POWER SUPPLIES REQUIRED FOR TC BE RESPONSIBLE FOR ALL POWER SUPPLIES REQUIRED FOR TC BE RESPONSIBLE FOR ALL POWER SUPPLIES REQUIRED FOR TC RESPONSIBLE FOR ALL POWER SUPPLIES REQUIRED FOR TC RESPONSIBLE FOR ALL POWER SUPPLIES REQUIRED FOR TC FOR ALL POWER SUPPLIES REQUIRED FOR TC FOR ALL POWER SUPPLIES REQUIRED FOR TC ALL POWER SUPPLIES REQUIRED FOR TC ALL POWER SUPPLIES REQUIRED FOR TC POWER SUPPLIES REQUIRED FOR TC POWER SUPPLIES REQUIRED FOR TC SUPPLIES REQUIRED FOR TC SUPPLIES REQUIRED FOR TC REQUIRED FOR TC REQUIRED FOR TC FOR TC FOR TC TC TC SYSTEM UNLESS OTHERWISE NOTED. REFER TO ELECTRICAL PANEL SCHEDULES FOR UNLESS OTHERWISE NOTED. REFER TO ELECTRICAL PANEL SCHEDULES FOR UNLESS OTHERWISE NOTED. REFER TO ELECTRICAL PANEL SCHEDULES FOR OTHERWISE NOTED. REFER TO ELECTRICAL PANEL SCHEDULES FOR OTHERWISE NOTED. REFER TO ELECTRICAL PANEL SCHEDULES FOR NOTED. REFER TO ELECTRICAL PANEL SCHEDULES FOR NOTED. REFER TO ELECTRICAL PANEL SCHEDULES FOR REFER TO ELECTRICAL PANEL SCHEDULES FOR REFER TO ELECTRICAL PANEL SCHEDULES FOR REFER TO ELECTRICAL PANEL SCHEDULES FOR TO ELECTRICAL PANEL SCHEDULES FOR TO ELECTRICAL PANEL SCHEDULES FOR ELECTRICAL PANEL SCHEDULES FOR ELECTRICAL PANEL SCHEDULES FOR PANEL SCHEDULES FOR PANEL SCHEDULES FOR SCHEDULES FOR SCHEDULES FOR FOR FOR SPARE CIRCUITS OR CIRCUITS DEDICATED TO TEMPERATURE CONTROLS. COORDINATE CIRCUITS OR CIRCUITS DEDICATED TO TEMPERATURE CONTROLS. COORDINATE CIRCUITS OR CIRCUITS DEDICATED TO TEMPERATURE CONTROLS. COORDINATE OR CIRCUITS DEDICATED TO TEMPERATURE CONTROLS. COORDINATE OR CIRCUITS DEDICATED TO TEMPERATURE CONTROLS. COORDINATE CIRCUITS DEDICATED TO TEMPERATURE CONTROLS. COORDINATE CIRCUITS DEDICATED TO TEMPERATURE CONTROLS. COORDINATE DEDICATED TO TEMPERATURE CONTROLS. COORDINATE DEDICATED TO TEMPERATURE CONTROLS. COORDINATE TO TEMPERATURE CONTROLS. COORDINATE TO TEMPERATURE CONTROLS. COORDINATE TEMPERATURE CONTROLS. COORDINATE TEMPERATURE CONTROLS. COORDINATE CONTROLS. COORDINATE CONTROLS. COORDINATE COORDINATE COORDINATE COORDINATE CIRCUIT USE WITH ELECTRICAL CONTRACTOR. 15. TC CONTRACTOR SHALL VERIFY EXACT LOCATION OF ALL FIELD MOUNTED TC CONTRACTOR SHALL VERIFY EXACT LOCATION OF ALL FIELD MOUNTED CONTRACTOR SHALL VERIFY EXACT LOCATION OF ALL FIELD MOUNTED CONTRACTOR SHALL VERIFY EXACT LOCATION OF ALL FIELD MOUNTED SHALL VERIFY EXACT LOCATION OF ALL FIELD MOUNTED SHALL VERIFY EXACT LOCATION OF ALL FIELD MOUNTED VERIFY EXACT LOCATION OF ALL FIELD MOUNTED VERIFY EXACT LOCATION OF ALL FIELD MOUNTED EXACT LOCATION OF ALL FIELD MOUNTED EXACT LOCATION OF ALL FIELD MOUNTED LOCATION OF ALL FIELD MOUNTED LOCATION OF ALL FIELD MOUNTED OF ALL FIELD MOUNTED OF ALL FIELD MOUNTED ALL FIELD MOUNTED ALL FIELD MOUNTED FIELD MOUNTED FIELD MOUNTED MOUNTED MOUNTED COMPONENTS. 16. THERMOSTATS AND SPACE TEMPERATURE SENSORS SHALL BE MOUNTED 4'-0” ABOVE THERMOSTATS AND SPACE TEMPERATURE SENSORS SHALL BE MOUNTED 4'-0” ABOVE AND SPACE TEMPERATURE SENSORS SHALL BE MOUNTED 4'-0” ABOVE AND SPACE TEMPERATURE SENSORS SHALL BE MOUNTED 4'-0” ABOVE SPACE TEMPERATURE SENSORS SHALL BE MOUNTED 4'-0” ABOVE SPACE TEMPERATURE SENSORS SHALL BE MOUNTED 4'-0” ABOVE TEMPERATURE SENSORS SHALL BE MOUNTED 4'-0” ABOVE TEMPERATURE SENSORS SHALL BE MOUNTED 4'-0” ABOVE SENSORS SHALL BE MOUNTED 4'-0” ABOVE SENSORS SHALL BE MOUNTED 4'-0” ABOVE SHALL BE MOUNTED 4'-0” ABOVE SHALL BE MOUNTED 4'-0” ABOVE BE MOUNTED 4'-0” ABOVE BE MOUNTED 4'-0” ABOVE MOUNTED 4'-0” ABOVE MOUNTED 4'-0” ABOVE 4'-0” ABOVE 4'-0” ABOVE ABOVE ABOVE FINISHED FLOOR UNLESS NOTED OTHERWISE. PROVIDE GUARDS FOR SPACE TEMP FLOOR UNLESS NOTED OTHERWISE. PROVIDE GUARDS FOR SPACE TEMP FLOOR UNLESS NOTED OTHERWISE. PROVIDE GUARDS FOR SPACE TEMP UNLESS NOTED OTHERWISE. PROVIDE GUARDS FOR SPACE TEMP UNLESS NOTED OTHERWISE. PROVIDE GUARDS FOR SPACE TEMP NOTED OTHERWISE. PROVIDE GUARDS FOR SPACE TEMP NOTED OTHERWISE. PROVIDE GUARDS FOR SPACE TEMP OTHERWISE. PROVIDE GUARDS FOR SPACE TEMP OTHERWISE. PROVIDE GUARDS FOR SPACE TEMP PROVIDE GUARDS FOR SPACE TEMP PROVIDE GUARDS FOR SPACE TEMP GUARDS FOR SPACE TEMP GUARDS FOR SPACE TEMP FOR SPACE TEMP FOR SPACE TEMP SPACE TEMP SPACE TEMP TEMP TEMP SENSORS LOCATED IN PUBLIC AREA. 17. TC CONTRACTOR SHALL PROVIDE AUXILIARY PANELS FOR REQUIRED PANEL MOUNTED TC CONTRACTOR SHALL PROVIDE AUXILIARY PANELS FOR REQUIRED PANEL MOUNTED CONTRACTOR SHALL PROVIDE AUXILIARY PANELS FOR REQUIRED PANEL MOUNTED CONTRACTOR SHALL PROVIDE AUXILIARY PANELS FOR REQUIRED PANEL MOUNTED SHALL PROVIDE AUXILIARY PANELS FOR REQUIRED PANEL MOUNTED SHALL PROVIDE AUXILIARY PANELS FOR REQUIRED PANEL MOUNTED PROVIDE AUXILIARY PANELS FOR REQUIRED PANEL MOUNTED PROVIDE AUXILIARY PANELS FOR REQUIRED PANEL MOUNTED AUXILIARY PANELS FOR REQUIRED PANEL MOUNTED AUXILIARY PANELS FOR REQUIRED PANEL MOUNTED PANELS FOR REQUIRED PANEL MOUNTED PANELS FOR REQUIRED PANEL MOUNTED FOR REQUIRED PANEL MOUNTED FOR REQUIRED PANEL MOUNTED REQUIRED PANEL MOUNTED REQUIRED PANEL MOUNTED PANEL MOUNTED PANEL MOUNTED MOUNTED MOUNTED EQUIPMENT SUCH AS RELAYS, TRANSDUCERS, CONTROL TRANSFORMERS, ETC. SUCH AS RELAYS, TRANSDUCERS, CONTROL TRANSFORMERS, ETC. SUCH AS RELAYS, TRANSDUCERS, CONTROL TRANSFORMERS, ETC. AS RELAYS, TRANSDUCERS, CONTROL TRANSFORMERS, ETC. AS RELAYS, TRANSDUCERS, CONTROL TRANSFORMERS, ETC. RELAYS, TRANSDUCERS, CONTROL TRANSFORMERS, ETC. RELAYS, TRANSDUCERS, CONTROL TRANSFORMERS, ETC. TRANSDUCERS, CONTROL TRANSFORMERS, ETC. TRANSDUCERS, CONTROL TRANSFORMERS, ETC. CONTROL TRANSFORMERS, ETC. CONTROL TRANSFORMERS, ETC. TRANSFORMERS, ETC. TRANSFORMERS, ETC. ETC. ETC. AUXILIARY PANELS SHALL BE LOCATED NEXT TO ASSOCIATED DDC PANEL. DEPENDING PANELS SHALL BE LOCATED NEXT TO ASSOCIATED DDC PANEL. DEPENDING PANELS SHALL BE LOCATED NEXT TO ASSOCIATED DDC PANEL. DEPENDING SHALL BE LOCATED NEXT TO ASSOCIATED DDC PANEL. DEPENDING SHALL BE LOCATED NEXT TO ASSOCIATED DDC PANEL. DEPENDING BE LOCATED NEXT TO ASSOCIATED DDC PANEL. DEPENDING BE LOCATED NEXT TO ASSOCIATED DDC PANEL. DEPENDING LOCATED NEXT TO ASSOCIATED DDC PANEL. DEPENDING LOCATED NEXT TO ASSOCIATED DDC PANEL. DEPENDING NEXT TO ASSOCIATED DDC PANEL. DEPENDING NEXT TO ASSOCIATED DDC PANEL. DEPENDING TO ASSOCIATED DDC PANEL. DEPENDING TO ASSOCIATED DDC PANEL. DEPENDING ASSOCIATED DDC PANEL. DEPENDING ASSOCIATED DDC PANEL. DEPENDING DDC PANEL. DEPENDING DDC PANEL. DEPENDING PANEL. DEPENDING PANEL. DEPENDING DEPENDING DEPENDING DEPENDING ON WIRE QUANTITY OR COMPLEXITY, PROVIDE CONDUITS BETWEEN PANELS OR WIRING WIRE QUANTITY OR COMPLEXITY, PROVIDE CONDUITS BETWEEN PANELS OR WIRING WIRE QUANTITY OR COMPLEXITY, PROVIDE CONDUITS BETWEEN PANELS OR WIRING QUANTITY OR COMPLEXITY, PROVIDE CONDUITS BETWEEN PANELS OR WIRING QUANTITY OR COMPLEXITY, PROVIDE CONDUITS BETWEEN PANELS OR WIRING OR COMPLEXITY, PROVIDE CONDUITS BETWEEN PANELS OR WIRING OR COMPLEXITY, PROVIDE CONDUITS BETWEEN PANELS OR WIRING COMPLEXITY, PROVIDE CONDUITS BETWEEN PANELS OR WIRING COMPLEXITY, PROVIDE CONDUITS BETWEEN PANELS OR WIRING PROVIDE CONDUITS BETWEEN PANELS OR WIRING PROVIDE CONDUITS BETWEEN PANELS OR WIRING CONDUITS BETWEEN PANELS OR WIRING CONDUITS BETWEEN PANELS OR WIRING BETWEEN PANELS OR WIRING BETWEEN PANELS OR WIRING PANELS OR WIRING PANELS OR WIRING OR WIRING OR WIRING WIRING WIRING THROUGH WITH CONDUIT STUBS ABOVE ALL ASSOCIATED PANELS. 18. REMOTELY MOUNTED FIELD DEVICES SUCH AS RELAYS, CONTROL TRANSFORMERS, ETC., REMOTELY MOUNTED FIELD DEVICES SUCH AS RELAYS, CONTROL TRANSFORMERS, ETC., MOUNTED FIELD DEVICES SUCH AS RELAYS, CONTROL TRANSFORMERS, ETC., MOUNTED FIELD DEVICES SUCH AS RELAYS, CONTROL TRANSFORMERS, ETC., FIELD DEVICES SUCH AS RELAYS, CONTROL TRANSFORMERS, ETC., FIELD DEVICES SUCH AS RELAYS, CONTROL TRANSFORMERS, ETC., DEVICES SUCH AS RELAYS, CONTROL TRANSFORMERS, ETC., DEVICES SUCH AS RELAYS, CONTROL TRANSFORMERS, ETC., SUCH AS RELAYS, CONTROL TRANSFORMERS, ETC., SUCH AS RELAYS, CONTROL TRANSFORMERS, ETC., AS RELAYS, CONTROL TRANSFORMERS, ETC., AS RELAYS, CONTROL TRANSFORMERS, ETC., RELAYS, CONTROL TRANSFORMERS, ETC., RELAYS, CONTROL TRANSFORMERS, ETC., CONTROL TRANSFORMERS, ETC., CONTROL TRANSFORMERS, ETC., TRANSFORMERS, ETC., TRANSFORMERS, ETC., ETC., ETC., SHALL BE HOUSED IN AN ENCLOSURE PROVIDED BY THE TC CONTRACTOR. 19. CONTROL TRANSFORMERS WHEN REQUIRED SHALL BE SIZED FOR 150% OF ACTUAL CONTROL TRANSFORMERS WHEN REQUIRED SHALL BE SIZED FOR 150% OF ACTUAL TRANSFORMERS WHEN REQUIRED SHALL BE SIZED FOR 150% OF ACTUAL TRANSFORMERS WHEN REQUIRED SHALL BE SIZED FOR 150% OF ACTUAL WHEN REQUIRED SHALL BE SIZED FOR 150% OF ACTUAL WHEN REQUIRED SHALL BE SIZED FOR 150% OF ACTUAL REQUIRED SHALL BE SIZED FOR 150% OF ACTUAL REQUIRED SHALL BE SIZED FOR 150% OF ACTUAL SHALL BE SIZED FOR 150% OF ACTUAL SHALL BE SIZED FOR 150% OF ACTUAL BE SIZED FOR 150% OF ACTUAL BE SIZED FOR 150% OF ACTUAL SIZED FOR 150% OF ACTUAL SIZED FOR 150% OF ACTUAL FOR 150% OF ACTUAL FOR 150% OF ACTUAL 150% OF ACTUAL 150% OF ACTUAL OF ACTUAL OF ACTUAL ACTUAL ACTUAL LOAD. 20. FREEZESTATS SHALL BE MOUNTED ON UPSTREAM FACE OF COOLING COILS. FREEZESTATS SHALL BE MOUNTED ON UPSTREAM FACE OF COOLING COILS. SHALL BE MOUNTED ON UPSTREAM FACE OF COOLING COILS. SHALL BE MOUNTED ON UPSTREAM FACE OF COOLING COILS. BE MOUNTED ON UPSTREAM FACE OF COOLING COILS. BE MOUNTED ON UPSTREAM FACE OF COOLING COILS. MOUNTED ON UPSTREAM FACE OF COOLING COILS. MOUNTED ON UPSTREAM FACE OF COOLING COILS. ON UPSTREAM FACE OF COOLING COILS. ON UPSTREAM FACE OF COOLING COILS. UPSTREAM FACE OF COOLING COILS. UPSTREAM FACE OF COOLING COILS. FACE OF COOLING COILS. FACE OF COOLING COILS. OF COOLING COILS. OF COOLING COILS. COOLING COILS. COOLING COILS. COILS. COILS. FREEZESTAT QUANTITY SHALL BE ONE PER 20 SQ. FT OF CROSS SECTIONAL AREA. 21. CURRENT SWITCHES USED FOR OPERATIONAL STATUS SHALL HAVE CURRENT CURRENT SWITCHES USED FOR OPERATIONAL STATUS SHALL HAVE CURRENT SWITCHES USED FOR OPERATIONAL STATUS SHALL HAVE CURRENT SWITCHES USED FOR OPERATIONAL STATUS SHALL HAVE CURRENT USED FOR OPERATIONAL STATUS SHALL HAVE CURRENT USED FOR OPERATIONAL STATUS SHALL HAVE CURRENT FOR OPERATIONAL STATUS SHALL HAVE CURRENT FOR OPERATIONAL STATUS SHALL HAVE CURRENT OPERATIONAL STATUS SHALL HAVE CURRENT OPERATIONAL STATUS SHALL HAVE CURRENT STATUS SHALL HAVE CURRENT STATUS SHALL HAVE CURRENT SHALL HAVE CURRENT SHALL HAVE CURRENT HAVE CURRENT HAVE CURRENT CURRENT CURRENT THRESHOLD SETPOINT ADJUSTED TO INDICATE BELT OR DRIVE FAILURE. 22. ALL CONTROL VALVES, CONTROL DAMPERS AND ASSOCIATED CONTROL ACTUATORS ALL CONTROL VALVES, CONTROL DAMPERS AND ASSOCIATED CONTROL ACTUATORS CONTROL VALVES, CONTROL DAMPERS AND ASSOCIATED CONTROL ACTUATORS CONTROL VALVES, CONTROL DAMPERS AND ASSOCIATED CONTROL ACTUATORS VALVES, CONTROL DAMPERS AND ASSOCIATED CONTROL ACTUATORS VALVES, CONTROL DAMPERS AND ASSOCIATED CONTROL ACTUATORS CONTROL DAMPERS AND ASSOCIATED CONTROL ACTUATORS CONTROL DAMPERS AND ASSOCIATED CONTROL ACTUATORS DAMPERS AND ASSOCIATED CONTROL ACTUATORS DAMPERS AND ASSOCIATED CONTROL ACTUATORS AND ASSOCIATED CONTROL ACTUATORS AND ASSOCIATED CONTROL ACTUATORS ASSOCIATED CONTROL ACTUATORS ASSOCIATED CONTROL ACTUATORS CONTROL ACTUATORS CONTROL ACTUATORS ACTUATORS ACTUATORS IDENTIFIED ON TC DRAWINGS SHALL BE FURNISHED BY TC CONTRACTOR UNLESS ON TC DRAWINGS SHALL BE FURNISHED BY TC CONTRACTOR UNLESS ON TC DRAWINGS SHALL BE FURNISHED BY TC CONTRACTOR UNLESS TC DRAWINGS SHALL BE FURNISHED BY TC CONTRACTOR UNLESS TC DRAWINGS SHALL BE FURNISHED BY TC CONTRACTOR UNLESS DRAWINGS SHALL BE FURNISHED BY TC CONTRACTOR UNLESS DRAWINGS SHALL BE FURNISHED BY TC CONTRACTOR UNLESS SHALL BE FURNISHED BY TC CONTRACTOR UNLESS SHALL BE FURNISHED BY TC CONTRACTOR UNLESS BE FURNISHED BY TC CONTRACTOR UNLESS BE FURNISHED BY TC CONTRACTOR UNLESS FURNISHED BY TC CONTRACTOR UNLESS FURNISHED BY TC CONTRACTOR UNLESS BY TC CONTRACTOR UNLESS BY TC CONTRACTOR UNLESS TC CONTRACTOR UNLESS TC CONTRACTOR UNLESS CONTRACTOR UNLESS CONTRACTOR UNLESS UNLESS UNLESS OTHERWISE NOTED. DAMPER SIZE AND LOCATIONS ARE INDICATED ON MECHANICAL NOTED. DAMPER SIZE AND LOCATIONS ARE INDICATED ON MECHANICAL NOTED. DAMPER SIZE AND LOCATIONS ARE INDICATED ON MECHANICAL DAMPER SIZE AND LOCATIONS ARE INDICATED ON MECHANICAL DAMPER SIZE AND LOCATIONS ARE INDICATED ON MECHANICAL DAMPER SIZE AND LOCATIONS ARE INDICATED ON MECHANICAL SIZE AND LOCATIONS ARE INDICATED ON MECHANICAL SIZE AND LOCATIONS ARE INDICATED ON MECHANICAL AND LOCATIONS ARE INDICATED ON MECHANICAL AND LOCATIONS ARE INDICATED ON MECHANICAL LOCATIONS ARE INDICATED ON MECHANICAL LOCATIONS ARE INDICATED ON MECHANICAL ARE INDICATED ON MECHANICAL ARE INDICATED ON MECHANICAL INDICATED ON MECHANICAL INDICATED ON MECHANICAL ON MECHANICAL ON MECHANICAL MECHANICAL MECHANICAL FLOOR PLAN DRAWINGS. 23. ALL CONTROL VALVES AND DAMPERS FURNISHED BY THE TC CONTRACTOR SHALL BE ALL CONTROL VALVES AND DAMPERS FURNISHED BY THE TC CONTRACTOR SHALL BE CONTROL VALVES AND DAMPERS FURNISHED BY THE TC CONTRACTOR SHALL BE CONTROL VALVES AND DAMPERS FURNISHED BY THE TC CONTRACTOR SHALL BE VALVES AND DAMPERS FURNISHED BY THE TC CONTRACTOR SHALL BE VALVES AND DAMPERS FURNISHED BY THE TC CONTRACTOR SHALL BE AND DAMPERS FURNISHED BY THE TC CONTRACTOR SHALL BE AND DAMPERS FURNISHED BY THE TC CONTRACTOR SHALL BE DAMPERS FURNISHED BY THE TC CONTRACTOR SHALL BE DAMPERS FURNISHED BY THE TC CONTRACTOR SHALL BE FURNISHED BY THE TC CONTRACTOR SHALL BE FURNISHED BY THE TC CONTRACTOR SHALL BE BY THE TC CONTRACTOR SHALL BE BY THE TC CONTRACTOR SHALL BE THE TC CONTRACTOR SHALL BE THE TC CONTRACTOR SHALL BE TC CONTRACTOR SHALL BE TC CONTRACTOR SHALL BE CONTRACTOR SHALL BE CONTRACTOR SHALL BE SHALL BE SHALL BE BE BE INSTALLED BY THE MECHANICAL CONTRACTOR. ALL PIPE PENETRATIONS AND BASIC BY THE MECHANICAL CONTRACTOR. ALL PIPE PENETRATIONS AND BASIC BY THE MECHANICAL CONTRACTOR. ALL PIPE PENETRATIONS AND BASIC THE MECHANICAL CONTRACTOR. ALL PIPE PENETRATIONS AND BASIC THE MECHANICAL CONTRACTOR. ALL PIPE PENETRATIONS AND BASIC MECHANICAL CONTRACTOR. ALL PIPE PENETRATIONS AND BASIC MECHANICAL CONTRACTOR. ALL PIPE PENETRATIONS AND BASIC CONTRACTOR. ALL PIPE PENETRATIONS AND BASIC CONTRACTOR. ALL PIPE PENETRATIONS AND BASIC ALL PIPE PENETRATIONS AND BASIC ALL PIPE PENETRATIONS AND BASIC ALL PIPE PENETRATIONS AND BASIC PIPE PENETRATIONS AND BASIC PIPE PENETRATIONS AND BASIC PENETRATIONS AND BASIC PENETRATIONS AND BASIC AND BASIC AND BASIC BASIC BASIC FITTINGS REQUIRED FOR SENSOR INSTALLATIONS SHALL BE PROVIDED BY MECHANICAL REQUIRED FOR SENSOR INSTALLATIONS SHALL BE PROVIDED BY MECHANICAL REQUIRED FOR SENSOR INSTALLATIONS SHALL BE PROVIDED BY MECHANICAL FOR SENSOR INSTALLATIONS SHALL BE PROVIDED BY MECHANICAL FOR SENSOR INSTALLATIONS SHALL BE PROVIDED BY MECHANICAL SENSOR INSTALLATIONS SHALL BE PROVIDED BY MECHANICAL SENSOR INSTALLATIONS SHALL BE PROVIDED BY MECHANICAL INSTALLATIONS SHALL BE PROVIDED BY MECHANICAL INSTALLATIONS SHALL BE PROVIDED BY MECHANICAL SHALL BE PROVIDED BY MECHANICAL SHALL BE PROVIDED BY MECHANICAL BE PROVIDED BY MECHANICAL BE PROVIDED BY MECHANICAL PROVIDED BY MECHANICAL PROVIDED BY MECHANICAL BY MECHANICAL BY MECHANICAL MECHANICAL MECHANICAL CONTRACTOR. 24. DAMPER ACTUATORS SHALL BE INSTALLED BY TC CONTRACTOR WHEN FURNISHED BY DAMPER ACTUATORS SHALL BE INSTALLED BY TC CONTRACTOR WHEN FURNISHED BY ACTUATORS SHALL BE INSTALLED BY TC CONTRACTOR WHEN FURNISHED BY ACTUATORS SHALL BE INSTALLED BY TC CONTRACTOR WHEN FURNISHED BY SHALL BE INSTALLED BY TC CONTRACTOR WHEN FURNISHED BY SHALL BE INSTALLED BY TC CONTRACTOR WHEN FURNISHED BY BE INSTALLED BY TC CONTRACTOR WHEN FURNISHED BY BE INSTALLED BY TC CONTRACTOR WHEN FURNISHED BY INSTALLED BY TC CONTRACTOR WHEN FURNISHED BY INSTALLED BY TC CONTRACTOR WHEN FURNISHED BY BY TC CONTRACTOR WHEN FURNISHED BY BY TC CONTRACTOR WHEN FURNISHED BY TC CONTRACTOR WHEN FURNISHED BY TC CONTRACTOR WHEN FURNISHED BY CONTRACTOR WHEN FURNISHED BY CONTRACTOR WHEN FURNISHED BY WHEN FURNISHED BY WHEN FURNISHED BY FURNISHED BY FURNISHED BY BY BY TC CONTRACTOR. 25. ALL INSTRUMENTATION TUBING REQUIRED FOR DPS AND DPT COMPONENT ALL INSTRUMENTATION TUBING REQUIRED FOR DPS AND DPT COMPONENT INSTRUMENTATION TUBING REQUIRED FOR DPS AND DPT COMPONENT INSTRUMENTATION TUBING REQUIRED FOR DPS AND DPT COMPONENT TUBING REQUIRED FOR DPS AND DPT COMPONENT TUBING REQUIRED FOR DPS AND DPT COMPONENT REQUIRED FOR DPS AND DPT COMPONENT REQUIRED FOR DPS AND DPT COMPONENT FOR DPS AND DPT COMPONENT FOR DPS AND DPT COMPONENT DPS AND DPT COMPONENT DPS AND DPT COMPONENT AND DPT COMPONENT AND DPT COMPONENT DPT COMPONENT DPT COMPONENT COMPONENT COMPONENT INSTALLATIONS SHALL BE PROVIDED BY TC CONTRACTOR. 26. TC CONTRACTOR SHALL FIELD MOUNT ALL REQUIRED "SHIPPED LOOSE" PACKAGED TC CONTRACTOR SHALL FIELD MOUNT ALL REQUIRED "SHIPPED LOOSE" PACKAGED CONTRACTOR SHALL FIELD MOUNT ALL REQUIRED "SHIPPED LOOSE" PACKAGED CONTRACTOR SHALL FIELD MOUNT ALL REQUIRED "SHIPPED LOOSE" PACKAGED SHALL FIELD MOUNT ALL REQUIRED "SHIPPED LOOSE" PACKAGED SHALL FIELD MOUNT ALL REQUIRED "SHIPPED LOOSE" PACKAGED FIELD MOUNT ALL REQUIRED "SHIPPED LOOSE" PACKAGED FIELD MOUNT ALL REQUIRED "SHIPPED LOOSE" PACKAGED MOUNT ALL REQUIRED "SHIPPED LOOSE" PACKAGED MOUNT ALL REQUIRED "SHIPPED LOOSE" PACKAGED ALL REQUIRED "SHIPPED LOOSE" PACKAGED ALL REQUIRED "SHIPPED LOOSE" PACKAGED REQUIRED "SHIPPED LOOSE" PACKAGED REQUIRED "SHIPPED LOOSE" PACKAGED "SHIPPED LOOSE" PACKAGED "SHIPPED LOOSE" PACKAGED LOOSE" PACKAGED LOOSE" PACKAGED PACKAGED PACKAGED CONTROL COMPONENTS FURNISHED BY EQUIPMENT SUPPLIERS WHERE INDICATED. ALL COMPONENTS FURNISHED BY EQUIPMENT SUPPLIERS WHERE INDICATED. ALL COMPONENTS FURNISHED BY EQUIPMENT SUPPLIERS WHERE INDICATED. ALL FURNISHED BY EQUIPMENT SUPPLIERS WHERE INDICATED. ALL FURNISHED BY EQUIPMENT SUPPLIERS WHERE INDICATED. ALL BY EQUIPMENT SUPPLIERS WHERE INDICATED. ALL BY EQUIPMENT SUPPLIERS WHERE INDICATED. ALL EQUIPMENT SUPPLIERS WHERE INDICATED. ALL EQUIPMENT SUPPLIERS WHERE INDICATED. ALL SUPPLIERS WHERE INDICATED. ALL SUPPLIERS WHERE INDICATED. ALL WHERE INDICATED. ALL WHERE INDICATED. ALL INDICATED. ALL INDICATED. ALL ALL ALL ALL REQUIRED 24V AND 120V FIELD WIRING SHALL BE PROVIDED BY TC CONTRACTOR 24V AND 120V FIELD WIRING SHALL BE PROVIDED BY TC CONTRACTOR 24V AND 120V FIELD WIRING SHALL BE PROVIDED BY TC CONTRACTOR AND 120V FIELD WIRING SHALL BE PROVIDED BY TC CONTRACTOR AND 120V FIELD WIRING SHALL BE PROVIDED BY TC CONTRACTOR 120V FIELD WIRING SHALL BE PROVIDED BY TC CONTRACTOR 120V FIELD WIRING SHALL BE PROVIDED BY TC CONTRACTOR FIELD WIRING SHALL BE PROVIDED BY TC CONTRACTOR FIELD WIRING SHALL BE PROVIDED BY TC CONTRACTOR WIRING SHALL BE PROVIDED BY TC CONTRACTOR WIRING SHALL BE PROVIDED BY TC CONTRACTOR SHALL BE PROVIDED BY TC CONTRACTOR SHALL BE PROVIDED BY TC CONTRACTOR BE PROVIDED BY TC CONTRACTOR BE PROVIDED BY TC CONTRACTOR PROVIDED BY TC CONTRACTOR PROVIDED BY TC CONTRACTOR BY TC CONTRACTOR BY TC CONTRACTOR TC CONTRACTOR TC CONTRACTOR CONTRACTOR CONTRACTOR UNLESS NOTED OTHERWISE. TC CONTRACTOR SHALL COORDINATE SPECIFIC SYSTEM NOTED OTHERWISE. TC CONTRACTOR SHALL COORDINATE SPECIFIC SYSTEM NOTED OTHERWISE. TC CONTRACTOR SHALL COORDINATE SPECIFIC SYSTEM OTHERWISE. TC CONTRACTOR SHALL COORDINATE SPECIFIC SYSTEM OTHERWISE. TC CONTRACTOR SHALL COORDINATE SPECIFIC SYSTEM TC CONTRACTOR SHALL COORDINATE SPECIFIC SYSTEM TC CONTRACTOR SHALL COORDINATE SPECIFIC SYSTEM TC CONTRACTOR SHALL COORDINATE SPECIFIC SYSTEM CONTRACTOR SHALL COORDINATE SPECIFIC SYSTEM CONTRACTOR SHALL COORDINATE SPECIFIC SYSTEM SHALL COORDINATE SPECIFIC SYSTEM SHALL COORDINATE SPECIFIC SYSTEM COORDINATE SPECIFIC SYSTEM COORDINATE SPECIFIC SYSTEM SPECIFIC SYSTEM SPECIFIC SYSTEM SYSTEM SYSTEM WIRING REQUIREMENTS WITH PACKAGED EQUIPMENT SUPPLIERS.

AutoCAD SHX Text

TC GENERAL NOTES

AutoCAD SHX Text

\\pba.local\projects\2018\2018-0451-00\CAD\2018-0451-M8-CP.dwg, M801, 3/11/2019 12:20:52 PM, Justin J. Bush, Peter Basso Associates Inc., M801, 3/11/2019 12:20:52 PM, Justin J. Bush, Peter Basso Associates Inc.M801, 3/11/2019 12:20:52 PM, Justin J. Bush, Peter Basso Associates Inc., 3/11/2019 12:20:52 PM, Justin J. Bush, Peter Basso Associates Inc.3/11/2019 12:20:52 PM, Justin J. Bush, Peter Basso Associates Inc., Justin J. Bush, Peter Basso Associates Inc.Justin J. Bush, Peter Basso Associates Inc., Peter Basso Associates Inc.

AutoCAD SHX Text

68182

AutoCAD SHX Text

No.

AutoCAD SHX Text

CHRISTOPHER

AutoCAD SHX Text

FRANTZ

AutoCAD SHX Text

ENGINEER

AutoCAD SHX Text

AARON


ANDERSON,

Phone 586 726 1234 Fax 586 726 8780


Michigan 48315

www.aewinc.com


Fax: 248-879-0007


Tel: 248-879-5666






SHEET TITLE:


SCALE:

PRELIMINARY


PROJECT NO.

SHEET NO.

CLIENT:

PROJECT NAME:

CONSTRUCTION RECORD

DATE:



















0132-1007


SHELBY TOWNSHIP

02/28/2019



CallR


BID ISSUE02/28/2019


..

FIRST FLOORPLUMBING AND

FIRE PROTECTIONDEMOLITION PLAN

MD201

1/8"=1'-0"


AutoCAD SHX Text

A

AutoCAD SHX Text

A

AutoCAD SHX Text

C

AutoCAD SHX Text

C

AutoCAD SHX Text

C

AutoCAD SHX Text

C

AutoCAD SHX Text

B

AutoCAD SHX Text

D

AutoCAD SHX Text

D

AutoCAD SHX Text

D

AutoCAD SHX Text

D

AutoCAD SHX Text

D

AutoCAD SHX Text

D

AutoCAD SHX Text

D

AutoCAD SHX Text

(E) HVAC-4 HVAC-4 (ON ROOF)

AutoCAD SHX Text

E

AutoCAD SHX Text

E

AutoCAD SHX Text

(E) HVAC-6 HVAC-6 (ON ROOF)

AutoCAD SHX Text

(E) EWC

AutoCAD SHX Text

(E) EWC

AutoCAD SHX Text

C

AutoCAD SHX Text

ST

AutoCAD SHX Text

ST

AutoCAD SHX Text

10

AutoCAD SHX Text

8

AutoCAD SHX Text

(E) VTR

AutoCAD SHX Text

1. ANY INTERRUPTION OF EXISTING SERVICES AND/OR EQUIPMENT SHALL BE ANY INTERRUPTION OF EXISTING SERVICES AND/OR EQUIPMENT SHALL BE PERFORMED AT A TIME APPROVED IN ADVANCE BY THE OWNER'S REPRESENTATIVE. 2. THESE DRAWINGS ARE DIAGRAMMATIC AND INDICATE THE GENERAL EXTENT OF THE THESE DRAWINGS ARE DIAGRAMMATIC AND INDICATE THE GENERAL EXTENT OF THE WORK. ACTUAL ROUTING AND SIZES OF EXISTING PIPING AND DUCTWORK MIGHT DIFFER TO A LIMITED EXTENT FROM WHAT IS SHOWN. MAJOR DISCREPANCIES BETWEEN THE DRAWINGS AND ACTUAL EXISTING CONDITIONS SHALL BE REPORTED TO THE ENGINEER. 3. THE EXACT EXTENT OF DEMOLITION SHALL BE AS REQUIRED BY THE NEW WORK. THE EXACT EXTENT OF DEMOLITION SHALL BE AS REQUIRED BY THE NEW WORK. 4. ALL MECHANICAL ITEMS TO BE REMOVED SHALL BE REMOVED COMPLETE, INCLUDING ALL MECHANICAL ITEMS TO BE REMOVED SHALL BE REMOVED COMPLETE, INCLUDING ALL RELATED ITEMS SUCH AS HANGERS, SUPPORTS, CONTROLS, ETC. CAP ALL OPEN ENDED PIPES AND DUCTWORK.

AutoCAD SHX Text

%%UMECHANICAL GENERAL DEMOLITION NOTES:

AutoCAD SHX Text

%%UDEMOLITION KEY NOTES:

AutoCAD SHX Text

#

AutoCAD SHX Text

A. REMOVE SINK ALONG WITH P-TRAP AND SUPPLIES. REUSE EXISTING ROUGH-INS FOR REMOVE SINK ALONG WITH P-TRAP AND SUPPLIES. REUSE EXISTING ROUGH-INS FOR NEW SINK. B. REMOVE ELECTRIC WATER COOLER. EXISTING PIPING AND SANITARY TO BE REUSED REMOVE ELECTRIC WATER COOLER. EXISTING PIPING AND SANITARY TO BE REUSED FOR INSTALLATION OF NEW ELECTRIC WATER COOLER. SEE NEW WORK. C. MODIFY EXISTING SPRINKLER BRANCH PIPING, SPRINKLERS, ALONG WITH HANGERS AS MODIFY EXISTING SPRINKLER BRANCH PIPING, SPRINKLERS, ALONG WITH HANGERS AS REQUIRED TO FACILITATE ARCHITECTURAL WALL AND CEILING REVISIONS. D. REMOVE EXISTING TEMPERING VALVE. REMOVE EXISTING TEMPERING VALVE. E. DISCONNECT GAS PIPING SERVING EXISTING ROOFTOP UNIT BEING REMOVED.DISCONNECT GAS PIPING SERVING EXISTING ROOFTOP UNIT BEING REMOVED.

AutoCAD SHX Text

\\pba.local\projects\2018\2018-0451-00\CAD\2018-0451-MD2-PL1.dwg, MD201, 3/11/2019 12:20:18 PM, Justin J. Bush, Peter Basso Associates Inc., MD201, 3/11/2019 12:20:18 PM, Justin J. Bush, Peter Basso Associates Inc.MD201, 3/11/2019 12:20:18 PM, Justin J. Bush, Peter Basso Associates Inc., 3/11/2019 12:20:18 PM, Justin J. Bush, Peter Basso Associates Inc.3/11/2019 12:20:18 PM, Justin J. Bush, Peter Basso Associates Inc., Justin J. Bush, Peter Basso Associates Inc.Justin J. Bush, Peter Basso Associates Inc., Peter Basso Associates Inc.

AutoCAD SHX Text


AutoCAD SHX Text

1"

AutoCAD SHX Text

68182

AutoCAD SHX Text

No.

AutoCAD SHX Text

CHRISTOPHER

AutoCAD SHX Text

FRANTZ

AutoCAD SHX Text

ENGINEER

AutoCAD SHX Text

AARON

AutoCAD SHX Text

SCALE: 1/8" = 1' - 0"

AutoCAD SHX Text

%%UFIRST FLOOR PLUMBING AND FIRE PROTECTION DEMOLITION PLAN

SHELBY TOWNSHIP

ACTIVITIES CENTER

AEW PROJECT #0132-1007 FEBRUARY 28, 2019

PROPOSAL FORM/ALL TRADES 00 41 00 - 1

SECTION 00 41 00 -- PROPOSAL FORM/ALL TRADES

Name of Contractor

Address, City, Zip

Phone #/Fax #

Email Address

PROJECT

SHELBY TOWNSHIP ACTIVTIES CENTER

OWNER

CHARTER TOWNSHIP OF SHELBY

52700 VAN DYKE AVE

SHELBY TOWNSHIP, MICHIGAN 48316

ARCHITECT

ANDERSON ECKSTEIN & WESTRICK

51301 SCHROENHER ROAD

SHELBY TOWNSHIP, MICHIGAN 48315

BASE PROPOSAL

Pursuant to and in compliance with the Invitation to Bid and the

Instructions to Bidders, and having carefully examined the

Bidding Documents with the Owner to complete the work in

accordance with the said Bidding Documents:

(Sum to be written out)

$________________________

BREAKDOWN OF BASE PROPOSAL (Submit at time of submission of

SHELBY TOWNSHIP

ACTIVITIES CENTER



proposal):

ARCHITECTURAL (INCLUDING STRUCTURAL)($_____________)DOLLARS

CIVIL ($_____________)DOLLARS

MECHANICAL HVAC ($_____________)DOLLARS

PLUMBING ($_____________)DOLLARS

TOTAL LUMP SUM BASE PROPOSAL BID ($_____________)DOLLARS

ALTERNATES The undersigned further proposes to execute the work specified in the respective technical division or indicated on the drawings for the sum added to the base proposal as stated below: Add Alternate No. 1: Provide infrastructure for A/V equipment. $__________________

Add Alternate No. 2: Replace all wall mats in Gym 109. $__________________ Add Alternate No. 3: Refinish entire wood floor in Gym 109. $__________________

UNIT COSTS The undersigned further proposes to execute additional work specified in the respective technical division or indicated on the drawings where the total quantities is currently unknown for the unit cost as follows: Unit Cost No. 1: Provide cost per linear foot of masonry tuckpointing. $__________________

SHELBY TOWNSHIP

ACTIVITIES CENTER



TIME OF COMPLETION

The undersigned agrees to complete the work covered by this

proposal within ____ calendar days which includes Saturdays,

Sundays, and Holidays to run consecutively after date of notice

to proceed with work.

VOLUNTARY ALTERNATES

The following voluntary alternates are offered by the bidder.

The undersigned agrees the amounts indicated below shall be

added to or deducted from the Base Bid, as the case may be, for

each alternate which is accepted.

Description of

Voluntary Alternates

Add

Deduct

1. ___________________________ _____________ ____________

2. ___________________________ _____________ ____________

3. ___________________________ _____________ ____________

4. ___________________________ _____________ ____________

PRICE GUARANTEE

The undersigned proposes that the price stated in this Proposal

is guaranteed for sixty (60) consecutive days from bid date.

TAXES

The undersigned acknowledges that the price stated above

includes all taxes of whatever character or description.

SUPPLEMENTAL FEES

SHELBY TOWNSHIP

ACTIVITIES CENTER



For additional work performed upon instruction of the Owner by

subcontractors of the undersigned, add to the subcontractor’s

prices for such additional work a fee of _______% which

includes all the charges of the undersigned for overhead and

profit.

Any additional work performed upon instructions of the Owner by

persons other than the subcontractors of the undersigned, the

charges will be actual cost of all labor and materials (less all

discounts) plus the fee of _____% which includes all the charges

of the undersigned for overhead and profit and to which shall be

added the actual cost of insurance and taxes.

Each proposal covering extra work shall be accompanied with

complete itemized materials and labor break downs.

For all revisions involving the deletion of contract work, it is

agreed that full credit shall be given the Owner for such work

deleted, including overhead and profit as quoted hereinbefore.

ADDENDA

If any addenda or bulletins covering changes to the Bidding

Documents have been received during the bidding period, the

bidder shall fill in their numbers and dates which acknowledges

having received same, and having included in this Proposal the

work involved:

Dated

Dated

Dated

Dated

Dated

BID SECURITY

SHELBY TOWNSHIP

ACTIVITIES CENTER



A bid bond executed by a U.S. Treasury Listed Surety Company

acceptable to Charter Township of Shelby or a cashier’s check in

the amount of 5% of the sum of the proposal payable to Charter

Township shall be submitted with each proposal. All proposals

shall be firm for a period of sixty (60) days.

PERFORMANCE, LABOR, AND MAINTENANCE AND GUARANTEE BOND

Successful bidders will be required to furnish a U.S. Treasury

Listed Company Performance, Payment, and Maintenance and

Guarantee Bond in the amount of 100% of their bid. The cost of

the Bond shall be included in each proposal.

The Charter Township of Shelby reserves the right to reject any

and/or all bids in whole or in part and to waive any informality

therein. The Charter Township of Shelby reserves the right to

accept the bid which in its opinion, is in the best interest of

the Owner.

FAMILIAL DISCLOSURE

Bidder has included Section 00401 Familial Disclosure Form (bid

will not be read without this form)

NEGOTIATION

The undersigned agrees that, should the overall cost exceed the

funds available, he will be willing to negotiate with the Owner

and Architect for the purpose of making further reductions in

the Contract work, and shall agree to give full credit for all

such reductions in the work requested by the Owner, including

full value of labor, materials, and subcontract work and

reasonable proportionate reductions in overhead and profit,

thereby arriving at an agreed upon Contract price.

SHELBY TOWNSHIP

ACTIVITIES CENTER



CONTRACT EXECUTION

The undersigned agrees to execute a Contract for work covered by

this Proposal, provided that he be notified of its acceptance

within sixty (60) days after the opening of bids.

The undersigned hereby declares that he has the legal status

checked below

( ) Individual

( ) Partnership having the following partners:

___________________________________________

___________________________________________

___________________________________________

( ) Corporation incorporated under the State laws of:

___________________________________________

This proposal is submitted in the name of, and notice of

acceptance should be mailed, faxed, or delivered to:

Date: Firm’s Name:

Phone No. ( )

By:

(Signature)

In the presence of : Title:

END OF SECTION 00 41 00

DOCUMENT 00 91 00 ADDENDA DATE PROJECT PROJECT … 1 Compiled.pdf · Troy, MI 48098-3276 Ann Arbor,...

Documents

Transcript of DOCUMENT 00 91 00 ADDENDA DATE PROJECT PROJECT … 1 Compiled.pdf · Troy, MI 48098-3276 Ann Arbor,...