DOCK ROAD A4241 HARBOUR WAY HARBOUR WAY(FFORDD YR … · (Tensar Triax or similar approved) in...

1
DOCK ROAD concrete post & chain link fence tarmac concrete post & chain link fence cl 7.11 il 5.10 approx only line of sewer concrete post & chain link fence concrete 7.13 7.11 7.08 7.12 7.27 7.26 7.01 7.48 6.98 7.12 Cycle storage concrete post & chain link fence tarmac concrete post & chain link fence line of sewer concrete post & chain link fence concrete 6.91 7.13 7.11 6.96 6.96 6.99 7.08 7.12 7.27 7.26 7.08 7.32 7.26 7.01 7.48 6.98 7.12 7.24 7.10 A4241 HARBOUR WAY Club 7.6m DOCK ROAD DOCK ROAD HARBOURSIDE ROAD ESS ESS Justice Centre Harbourside Business Park HARBOUR WAY (FFORDD YR HARBWR) A4241 Llewellyn House ESS LEVEL SITE PLATFORM TO BE CREATED: DATUM LEVEL = 7.500m AOD LEVEL SITE PLATFORM TO BE CREATED: DATUM LEVEL = 7.500m AOD see dwg C2014B-CU-1701 for details of concrete channel ENGINEERING AND TRANSPORT GARETH NUTT DIRECTOR OF ENVIRONMENT THE QUAYS, BRUNEL WAY BAGLAN ENERGY PARK NEATH SA11 2GG A1 Date Approved Drawing No. File No. Drawn Date Scales Financial Code No. Checked Date Job Title Ch Client Rev Details Dr Ap Date Job Title Drg. No. 1. All dimensions are in millimetres unless otherwise stated. NOTES 26.007500.B054.300916 APRIL '18 MCB APRIL '18 HIH APRIL '18 1:500 C2014B / EW / 0601 C2014B HARBOURSIDE STRATEGIC EMPLOYMENT SITE EARTHWORKS C2014B / EW / 0601 KEY 100mm depth of TRANSLOCATED material on slopes less than 10° to the horizontal. 100mm depth TRANSLOCATED material on slopes more than 10° to the horizontal. Area to be remediated to reduce contamination levels and eliminate voids in the ground to allow for future development. Area of Imported fill . 500mm Type 1 Sub base material on layer of Geogrid (Tensar Triax or similar approved) in areas of Road Construction - see CS Series of drawings for placement. 2. All areas being prepared for planting or grass seeding except for the mitigation areas are to be treated with herbicide in accordance with Appendix 30/2. 3. All areas to be top soiled are to be checked for compaction. This, where found, is to be alleviated by ripping to a depth of 300mm. 4. In the grass seeding areas, the soil shall be broken up to 300mm depth, and the top 50mm reduced to a tilth suitable for final shaping with a grading blade, (maximum particle size to be 15mm for grading topsoil and 50mm for grading subsoil). Any undesirable material, including stones larger than 15mm for topsoil areas and 50mm for subsoil areas shall be removed off site. When soil is reasonably dry and workable it shall be graded in accordance with the drawings and Clause 3004.10. 5. Except where seed is to be sown onto low fertility topsoil, then immediately prior to sowing, the upper 50mm of soil shall be reduced to a fine tilth by the use of a chain harrow or other suitable plant. In the wild flower seeding areas where low fertility topsoil has been spread then immediately prior to sowing, the upper 50mm of soil shall be reduced to a coarse tilth only by a chain harrow or other suitable plant. C2014B HARBOURSIDE STRATEGIC EMPLOYMENT SITE EARTHWORKS 100mm depth topsoil Class 5A or 5B on slopes less than 10° to the horizontal. 100mm depth topsoil Class 5A or 5B on slopes more than 10° to the horizontal. Status PLANNING

Transcript of DOCK ROAD A4241 HARBOUR WAY HARBOUR WAY(FFORDD YR … · (Tensar Triax or similar approved) in...

Page 1: DOCK ROAD A4241 HARBOUR WAY HARBOUR WAY(FFORDD YR … · (Tensar Triax or similar approved) in areas of Road Construction - see CS Series of drawings for placement. 2.All areas being

D

O

C

K

R

O

A

D

c

o

n

c

r

e

t

e

p

o

s

t

&

c

h

a

i

n

l

i

n

k

f

e

n

c

e

tarmac

c

o

n

c

r

e

t

e

p

o

s

t

&

c

h

a

i

n

l

i

n

k

f

e

n

c

e

cl 7.11

il 5.10

approx only

l

i

n

e

o

f

s

e

w

e

r

c

o

n

c

r

e

t

e

p

o

s

t

&

c

h

a

i

n

l

i

n

k

f

e

n

c

e

c

o

n

c

r

e

t

e

7

.

1

3

7

.

1

1

7

.

0

8

7

.

1

2

7

.

2

7

7

.

2

6

7

.

0

1

7

.

4

8

6.98

7.12

C

y

c

le

s

t

o

r

a

g

e

c

o

n

c

r

e

t

e

p

o

s

t

&

c

h

a

i

n

l

i

n

k

f

e

n

c

e

tarmac

c

o

n

c

r

e

t

e

p

o

s

t

&

c

h

a

i

n

l

i

n

k

f

e

n

c

e

l

i

n

e

o

f

s

e

w

e

r

c

o

n

c

r

e

t

e

p

o

s

t

&

c

h

a

i

n

l

i

n

k

f

e

n

c

e

c

o

n

c

r

e

t

e

6

.

9

1

7

.

1

3

7

.

1

1

6.96

6

.

9

6

6.99

7

.

0

8

7

.

1

2

7

.

2

7

7

.

2

6

7.0

8

7

.

3

2

7

.

2

6

7

.

0

1

7

.

4

8

6.98

7.12

7

.

2

4

7

.

1

0

A4241 H

AR

BO

U

R

W

AY

Club

7.6m

D

O

C

K

R

O

A

D

D

O

C

K

R

O

A

D

H

A

R

B

O

U

R

S

I

D

E

R

O

A

D

ESS

ESS

Justice Centre

Harbourside

Business Park

H

A

R

B

O

U

R

W

A

Y

(F

F

O

R

D

D

Y

R

H

A

R

B

W

R

)A

4

2

4

1

Llewellyn House

ESS

LEVEL SITE PLATFORM

TO BE CREATED: DATUM

LEVEL = 7.500m AOD

LEVEL SITE PLATFORM

TO BE CREATED: DATUM

LEVEL = 7.500m AOD

see dwg

C2014B-CU-1701

for details of

concrete channel

ENGINEERING AND TRANSPORT

GARETH NUTT

DIRECTOR OF ENVIRONMENT

THE QUAYS, BRUNEL WAY

BAGLAN ENERGY PARK

NEATH SA11 2GG

A1

Date

Approved

Drawing No.

File No.

Drawn

Date

Scales

Financial Code No.

Checked

Date

Job Title

Ch

Client

Rev Details Dr Ap Date

Job T

itle

Drg. N

o.

1. All dimensions are in millimetres unless

otherwise stated.

NOTES

26.007500.B054.300916

APRIL '18

MCB

APRIL '18

HIH

APRIL '18

1:500

C2014B / EW / 0601

C20

14B

HA

RB

OU

RSI

DE

STR

ATE

GIC

EM

PLO

YM

ENT

SITE

E

AR

THW

OR

KS

C20

14B

/ EW

/ 06

01KEY

100mm depth of TRANSLOCATED material

on slopes less than 10° to the horizontal.

100mm depth TRANSLOCATED material

on slopes more than 10° to the horizontal.

Area to be remediated to reduce contamination levels and

eliminate voids in the ground to allow for future development.

Area of Imported fill .

500mm Type 1 Sub base material on layer of Geogrid

(Tensar Triax or similar approved)

in areas of Road Construction - see CS Series of drawings

for placement.

2. All areas being prepared for planting or grass

seeding except for the mitigation areas are to

be treated with herbicide in accordance with

Appendix 30/2.

3. All areas to be top soiled are to be checked for

compaction. This, where found, is to be

alleviated by ripping to a depth of 300mm.

4. In the grass seeding areas, the soil shall be

broken up to 300mm depth, and the top 50mm

reduced to a tilth suitable for final shaping with

a grading blade, (maximum particle size to be

15mm for grading topsoil and 50mm for grading

subsoil). Any undesirable material, including

stones larger than 15mm for topsoil areas and

50mm for subsoil areas shall be removed off

site. When soil is reasonably dry and workable

it shall be graded in accordance with the

drawings and Clause 3004.10.

5. Except where seed is to be sown onto low

fertility topsoil, then immediately prior to sowing,

the upper 50mm of soil shall be reduced to a

fine tilth by the use of a chain harrow or other

suitable plant. In the wild flower seeding areas

where low fertility topsoil has been spread then

immediately prior to sowing, the upper 50mm of

soil shall be reduced to a coarse tilth only by a

chain harrow or other suitable plant.

C2014B HARBOURSIDE STRATEGIC

EMPLOYMENT SITE

EARTHWORKS

100mm depth topsoil Class 5A or 5B on

slopes less than 10° to the horizontal.

100mm depth topsoil Class 5A or 5B on

slopes more than 10° to the horizontal.

Status PLANNING

AutoCAD SHX Text
ST
AutoCAD SHX Text
ST
AutoCAD SHX Text
CV
AutoCAD SHX Text
CV
AutoCAD SHX Text
GL
AutoCAD SHX Text
GL
AutoCAD SHX Text
LC
AutoCAD SHX Text
PS
AutoCAD SHX Text
PS
AutoCAD SHX Text
PS
AutoCAD SHX Text
PS
AutoCAD SHX Text
RS
AutoCAD SHX Text
RS
AutoCAD SHX Text
BL
AutoCAD SHX Text
BL
AutoCAD SHX Text
BL
AutoCAD SHX Text
BL
AutoCAD SHX Text
BL
AutoCAD SHX Text
BL
AutoCAD SHX Text
BL
AutoCAD SHX Text
BL
AutoCAD SHX Text
BL
AutoCAD SHX Text
BL
AutoCAD SHX Text
BL
AutoCAD SHX Text
CT
AutoCAD SHX Text
CT
AutoCAD SHX Text
MH
AutoCAD SHX Text
MH
AutoCAD SHX Text
MH
AutoCAD SHX Text
MH
AutoCAD SHX Text
MH
AutoCAD SHX Text
MH
AutoCAD SHX Text
MH
AutoCAD SHX Text
MH
AutoCAD SHX Text
MH
AutoCAD SHX Text
MH
AutoCAD SHX Text
VT
AutoCAD SHX Text
VT
AutoCAD SHX Text
VT
AutoCAD SHX Text
VT
AutoCAD SHX Text
VT
AutoCAD SHX Text
VT
AutoCAD SHX Text
VT
AutoCAD SHX Text
VT
AutoCAD SHX Text
WT
AutoCAD SHX Text
WT
AutoCAD SHX Text
WT
AutoCAD SHX Text
7.311
AutoCAD SHX Text
7.318
AutoCAD SHX Text
7.114
AutoCAD SHX Text
6.965
AutoCAD SHX Text
7.048
AutoCAD SHX Text
6.995
AutoCAD SHX Text
6.921
AutoCAD SHX Text
7.018
AutoCAD SHX Text
7.015
AutoCAD SHX Text
7.093
AutoCAD SHX Text
7.005
AutoCAD SHX Text
7.138
AutoCAD SHX Text
7.205
AutoCAD SHX Text
7.188
AutoCAD SHX Text
7.150
AutoCAD SHX Text
7.244
AutoCAD SHX Text
7.331
AutoCAD SHX Text
7.377
AutoCAD SHX Text
7.448
AutoCAD SHX Text
7.462
AutoCAD SHX Text
7.436
AutoCAD SHX Text
7.416
AutoCAD SHX Text
7.323
AutoCAD SHX Text
7.237
AutoCAD SHX Text
7.220
AutoCAD SHX Text
7.151
AutoCAD SHX Text
7.094
AutoCAD SHX Text
7.401
AutoCAD SHX Text
7.420
AutoCAD SHX Text
7.269
AutoCAD SHX Text
7.153
AutoCAD SHX Text
7.007
AutoCAD SHX Text
7.691
AutoCAD SHX Text
7.706
AutoCAD SHX Text
7.764
AutoCAD SHX Text
7.693
AutoCAD SHX Text
7.554
AutoCAD SHX Text
7.639
AutoCAD SHX Text
7.662
AutoCAD SHX Text
7.644
AutoCAD SHX Text
7.606
AutoCAD SHX Text
7.606
AutoCAD SHX Text
7.322
AutoCAD SHX Text
7.492
AutoCAD SHX Text
7.474
AutoCAD SHX Text
7.462
AutoCAD SHX Text
7.510
AutoCAD SHX Text
6.782
AutoCAD SHX Text
6.952
AutoCAD SHX Text
6.972
AutoCAD SHX Text
6.880
AutoCAD SHX Text
6.701
AutoCAD SHX Text
6.920
AutoCAD SHX Text
6.789
AutoCAD SHX Text
6.840
AutoCAD SHX Text
6.756
AutoCAD SHX Text
6.861
AutoCAD SHX Text
6.844
AutoCAD SHX Text
6.843
AutoCAD SHX Text
6.885
AutoCAD SHX Text
6.655
AutoCAD SHX Text
6.926
AutoCAD SHX Text
6.902
AutoCAD SHX Text
6.784
AutoCAD SHX Text
6.824
AutoCAD SHX Text
8.527
AutoCAD SHX Text
8.505
AutoCAD SHX Text
8.537
AutoCAD SHX Text
8.586
AutoCAD SHX Text
8.531
AutoCAD SHX Text
8.557
AutoCAD SHX Text
8.506
AutoCAD SHX Text
8.549
AutoCAD SHX Text
8.795
AutoCAD SHX Text
8.701
AutoCAD SHX Text
6.996
AutoCAD SHX Text
6.841
AutoCAD SHX Text
6.938
AutoCAD SHX Text
6.913
AutoCAD SHX Text
6.884
AutoCAD SHX Text
6.751
AutoCAD SHX Text
6.856
AutoCAD SHX Text
6.834
AutoCAD SHX Text
6.829
AutoCAD SHX Text
6.691
AutoCAD SHX Text
6.691
AutoCAD SHX Text
6.703
AutoCAD SHX Text
6.723
AutoCAD SHX Text
6.629
AutoCAD SHX Text
6.785
AutoCAD SHX Text
6.791
AutoCAD SHX Text
6.800
AutoCAD SHX Text
6.883
AutoCAD SHX Text
6.883
AutoCAD SHX Text
6.937
AutoCAD SHX Text
6.611
AutoCAD SHX Text
6.631
AutoCAD SHX Text
6.752
AutoCAD SHX Text
6.669
AutoCAD SHX Text
6.835
AutoCAD SHX Text
6.812
AutoCAD SHX Text
6.694
AutoCAD SHX Text
6.706
AutoCAD SHX Text
6.708
AutoCAD SHX Text
6.561
AutoCAD SHX Text
6.823
AutoCAD SHX Text
6.736
AutoCAD SHX Text
6.656
AutoCAD SHX Text
6.704
AutoCAD SHX Text
6.689
AutoCAD SHX Text
6.655
AutoCAD SHX Text
6.731
AutoCAD SHX Text
6.626
AutoCAD SHX Text
6.792
AutoCAD SHX Text
6.670
AutoCAD SHX Text
6.669
AutoCAD SHX Text
6.873
AutoCAD SHX Text
6.728
AutoCAD SHX Text
6.599
AutoCAD SHX Text
6.725
AutoCAD SHX Text
6.685
AutoCAD SHX Text
6.730
AutoCAD SHX Text
6.796
AutoCAD SHX Text
6.715
AutoCAD SHX Text
6.732
AutoCAD SHX Text
6.659
AutoCAD SHX Text
6.789
AutoCAD SHX Text
7.334
AutoCAD SHX Text
7.020
AutoCAD SHX Text
6.845
AutoCAD SHX Text
6.743
AutoCAD SHX Text
6.645
AutoCAD SHX Text
6.705
AutoCAD SHX Text
6.750
AutoCAD SHX Text
0.000
AutoCAD SHX Text
100.000
AutoCAD SHX Text
200.000
AutoCAD SHX Text
R=-27.000
AutoCAD SHX Text
R=-9.000
AutoCAD SHX Text
R=-27.000
AutoCAD SHX Text
R=-27.000
AutoCAD SHX Text
R=-9.000
AutoCAD SHX Text
R=-27.000
AutoCAD SHX Text
R=-27.000
AutoCAD SHX Text
R=-9.000
AutoCAD SHX Text
R=-27.000
AutoCAD SHX Text
R=-27.000
AutoCAD SHX Text
R=-9.000
AutoCAD SHX Text
R=-27.000
AutoCAD SHX Text
R=-27.000
AutoCAD SHX Text
R=-9.000
AutoCAD SHX Text
R=-27.000
AutoCAD SHX Text
R=-27.000
AutoCAD SHX Text
R=-9.000
AutoCAD SHX Text
R=-27.000
AutoCAD SHX Text
R=27.000
AutoCAD SHX Text
R=9.000
AutoCAD SHX Text
R=27.000
AutoCAD SHX Text
R=27.000
AutoCAD SHX Text
R=9.000
AutoCAD SHX Text
R=27.000
AutoCAD SHX Text
R=27.000
AutoCAD SHX Text
R=9.000
AutoCAD SHX Text
R=27.000
AutoCAD SHX Text
R=27.000
AutoCAD SHX Text
R=9.000
AutoCAD SHX Text
R=27.000
AutoCAD SHX Text
R=27.000
AutoCAD SHX Text
R=9.000
AutoCAD SHX Text
R=27.000
AutoCAD SHX Text
R=27.000
AutoCAD SHX Text
R=9.000
AutoCAD SHX Text
R=27.000
AutoCAD SHX Text
R=-27.000
AutoCAD SHX Text
R=-9.000
AutoCAD SHX Text
R=-27.000
AutoCAD SHX Text
R=-27.000
AutoCAD SHX Text
R=-9.000
AutoCAD SHX Text
R=-27.000
AutoCAD SHX Text
R=-27.000
AutoCAD SHX Text
R=-9.000
AutoCAD SHX Text
R=-27.000
AutoCAD SHX Text
R=-27.000
AutoCAD SHX Text
R=-9.000
AutoCAD SHX Text
R=-27.000
AutoCAD SHX Text
%%UTHIS IS A C.A.D. PRODUCED DRAWING AND SHOULD NOT BE AMENDED BY HAND.