Multiport Flow SelectorCompact and economical production test manifold

Design and Construction

BETTIS G-Series with Wireless Transmitter

Emerson Process Management Valve Automation provides a broad product offering of automation and control solutions for the oil and gas industry. For more than 55 years, hydrocarbon producers have relied upon the BETTIS product brand as an added assurance of safety, reliability and performance. BETTIS innovations have set the brand apart and provided our clients with savings in both time and money. The BETTIS Multiport Flow Selector (MPFS) provides a cost effective and compact means to improve production management and well optimization. The MPFS allows the selecting and diverting of well fluids from an individual well to a single test outlet, flow loop or sampling device. Connecting up to seven flow lines, the Multiport Flow Selector allows the combined fluids to flow through a separate group outlet, while simultaneously isolating any single well for testing. The unique flow selector is ideal for a variety of oil, gas and process applications and can be used either as a standalone device or with a multiphase meter. The MPFS can also be used for water injection for Enhanced Oil Recovery (EOR) projects. It provides control simplicity in an environment where size, weight and reliability are all key factors. The Multiport Flow Selector reduces the costs of installation, operation and maintenance of the well test system throughout its life cycle.

MULTIPORT FLOW SELECTOR APPLICATION AND FEATURES

More compact than either conventional two-way or three-way valve manifolds

Reduces number of isolation valves in production/test manifolds

Available with a multitude of trims and surface treatments for all operating environments

Available with two-wire communication for remote control and status indication

Reduced installation, operating and maintenance costs

Fitted with BETTIS Multiport Control Actuator (MPA)

Field adjustable seal/seat with various materials for adverse service conditions

Operating temperature range: -20F to +392F (-29C to +200C)

Emerson Process Management Valve Automation is a recognized leader in oil and gas flow automation solutions.

The BETTIS Multiport Flow Selector is the latest concept and the preferred choice in production test manifold design.

The Multiport Flow Selector is compact, economical and reliable.

Assembly and Features

Five available sizes with multiple ANSI pressure ratings

SizeANSI Class

150 300 600 900 1500 2500

2 x 4 X X X X

3 x 6 X X X X X

4 x 8 X X X X

4 x 10 X X

6 x 16 X X X X X X

Model designations as follows:

A x B ANSI rating, where;

A = Well inlet/test outlet internal diameters (inches)B = Group outlet internal diameter (inches)

COMMERCIAL BENEFITS Initial Purchase/Commissioning

- Reduced number of valves- Reduced piping costs- Reduced automation costs- Reduced wiring costs- Reduced maintenance costs- Reduced skid weight and size

Ownership/Maintenance

- Reduced operating costs- Reduced parts cost- Reduced downtime- Reduced labor

Vent Plug

Well Inlet (1 of 7)

Group Outlet

Plug Seal

BETTIS Actuator

Bonnet

Lower Plug Seal O-Ring and Back-up

Upper Plug Seal O-Ring and Back-up

Test Outlet

MSM Skid Assembly

Inlet Flow lines (1 of 8)

MPFS

Test Outlet

BETTIS Multiport Actuator (MPA)

The BETTIS Multiport Actuator (MPA) is an electronic system specifically designed to control and monitor the operation of the Multiport Flow Selector. It combines an exclusive solid state motor starter with control software to provide precise positioning of the Multiport Flow Selector within +/- one degree of the selected port, retaining that position even in the event of a power loss. The Multiport Actuator features include:

Control Knob

Home Port LED (On within 0.25 of home port)

Over Torque LED (flashes when configured torque exceeded) Torque Display

(15-99% torque displayed or port no.)

Run LED (Red while running,

Green within 2 of port)

Port LED (Green when within 1, Red within 2 of port)

Alarm (Yellow flashes in alarm)

Selector Knob

Combined LOR Selector

Integral Disconnect

Electrical Enclosure

BETTIS3000 Gearbox

4-Pole Motor

Local Display Module (LDM)

Manual Override

Position Encoder

Certified explosion proof Class I, Div I, Groups C & D EEx d IIB T4

Operating temperature range: 58F to +149F (-50C to +65C)

Heavy duty gearbox with capacity of 3000 ft lbs

Wide range of 4-pole motors available for any voltage or torque

Configurable for MPFS from 3 to 8 ports

12-bit encoder coupled directly to valve stem for position feedback

Precise motor control with microcontroller updates every 1 mS

Supports network protocols including Modbus, Modbus TCP/IP, Profibus DP, FOUNDATION fieldbus, DeviceNet and Ethernet

I/O and alarm monitoring

Dual configuration factory or user setup

Modular Versatility

Multiport Flow Selectors are less expensive than conventional manifolds in bothinitial purchase and ownership costs.

MPFS can be installed as standalone or with a test separator or multiphase meter.

Multiport Flow Selectors typically amortize the cost of automation over fewer than seven wells.

Historically, connecting individual production wells or flowlines to a test separator required a multitude of valves that had to be opened by hand. In addition to the valves and shutoff devices, the system required considerable piping. The conventional two-way or three-way systems cost more initially, required higher operating costs, needed more maintenance and downtime and added to the personnel risks. The Multiport Flow Selector, with automated actuated control, is safer, less expensive, lighter weight and more compact than conventional systems.

Requires 21 separate manual or actuated valves with associated piping

Only requires seven valves

CONvENTIONAL 7-WELL, TWO-WAy vALvE MANIFOLD

BETTIS MULTIPORT FLOW SELECTOR MANIFOLD

Less piping More compact Fewer control points

Less expensive Less weight (especially critical

for offshore applications)

Well 1

Well 2

Well 3

Well 4

Well 5

Well 6

Well 7

To Production

To Test Separator

Well 1

Well 2

Well 3

Well 4

Well 5

Well 6

Well 7

To Test Separator

To Production

Modular Versatility

www.emersonprocess.com/bettis

2013 Emerson Process Management. All rights reserved.

The Emerson logo is a trademark and service mark of Emerson Electric Co. Brand mark listing are marks of one of the Emerson Process Management family of companies. All other marks are property of their respective owners.

The contents of this publication are presented for information purposes only, and while every effort has been made to ensure their accuracy, they are not to be construed as warranties or guarantees, express or implied, regarding the products or services described herein or their use or applicability. All sales are governed by our terms and conditions, which are available on request. We reserve the right to modify or improve the designs or specifications of our products at any time without notice.

The colour orange, U.S. Reg. No. 2,739,393, is a registered trademark of the BETTIS Corporation.

DOC.6P.MFS.UK REV D 06-13

Contact Us: Emerson Process Management, Valve Automation facilities at your nearest location:

North & South AmericA

19200 Northwest FreewayHouston TX 77065USAT +1 281 477 4100F +1 281 477 2809

2500 Park Avenue West Mansfield, OH 44906 USA T +1 419 529 4311 F +1 419 529 3688

13840 Pike RoadMissouri City, Texas 77489USAT +1 281 499 1561F +1 281 499 8445

Av. Hollingsworth, 325, Iporanga Sorocaba, SP 18087-105 Brazil T +55 15 3238 3788 F +55 15 3228 3300

middle eASt & AfricA

P.O. Box 17033 Dubai United Arab Emirates T +971 4 811 8100 F +971 4 886 5465

P.O. Box 105958 Abu Dhabi United Arab Emirates T +971 2 697 2000 F +971 2 555 0364

P.O. Box 3911 Al Khobar 31952 Saudi Arabia T +966 3 814 7560 F +966 3 814 7570

P.O. Box 10305Jubail 31961Saudi ArabiaT +966 3 340 8650F +966 3 340 8790

P.O. Box 32281 Doha Qatar T +974 4 576777 F +974 4 315448

Al Bradheya ,Saeed Ameen St.Area Number 29, Villa 61 BasraIraqT +971 557 008 704 F +971 255 503 64

24 Angus CrescentLongmeadow Business EstateModderfontein, Ext 5 1609P.O.Box 6908Greenstone 1616South AfricaT +27 11 451 3700 F +27 11 451 3800

europe

Asveldweg 11 7556 BR Hengelo (O) The Netherlands T +31 74 256 1010 F +31 74 291 0938

Siemensring 11247877 Willich Germany T +49 2154 499 660 F +49 2154 499 6613

25, Rue de VilleneuveSilic BP 4043494583 Rungis France T +33 1 49 79 73 00F +33 1 49 79 73 99

Via Montello 71/73 20038 Seregno (Milan) Italy T +39 0362 2285 207 F +39 0362 2436 55

6 Bracken Hill South West Industrial Estate Peterlee SR8 2LS United Kingdom T +44 191 518 0020 F +44 191 518 0032

2A Szturmowa Str02-678 WarsawPolandT +48 22 45 89 237F +48 22 45 89 231

C/ Francisco Gervs, 128108 Alcobendas MadridSpainT +34 0913 586 000F +34 0913 589 145

Letnikovskaya Str. 10-2115114 MoscowRussia and FSUT +7 495 981 98 11F +7 495 981 98 10

ASiA pAcific

No. 9 Gul Road#01-02 Singapore 629361 T +65 6501 4600 F +65 6268 0028

9/F Gateway BuildingNo. 10 Ya Bao RoadChaoyang DistrictBeijing 100020P.R.ChinaT +86 10 8572 6666F +86 10 8572 6888

No.1 Lai Yuan RoadWuqing Development AreaTianjin 301700P.R. ChinaT +86 22 8212 3300F +86 22 8212 3308

Lot 13112, Mukim Labu Kawasan Perindustrian Nilai 71807 Nilai, Negeri Sembilan Malaysia T +60 6 799 2323 F +60 6 799 9942

471 Mountain Highway Bayswater, Victoria 3153 Australia T +61 3 9721 0200 F +61 3 9720 0588

Delphi B Wing, 601 & 6026th Floor, Central AvenuePowai, Mumbai 400 076IndiaT +91 22 6662 0566F +91 22 6662 0500