Do not include this Slide.
34
BUILDING STRONG ® Do not include this Slide. This template is a guide for preparing power points presentations. The information requested is important and should be provided in generally the same sequence and same format. But each presentation must be tailored for the specific segment being presented. Some slides can be eliminated and sometimes extra slides will be necessary to best convey the background and backup data needed to make the case for the LSAC assignment. Pictures are generally a very good method for communicating information on a particular feature or defect being evaluated. Some of the additional summary type slides will eventually be produced directly from the LST but until then you will have to cut and paste the data / graph into the power point. Adjust font size, color, layout, tables, etc. as needed to improve the presentation. Do not overload your slides with too much information; It is better to add a slide. Don’t be surprised to see future revisions to the Power Point.
-
Upload
maris-holcomb -
Category
Documents
-
view
15 -
download
1
description
Do not include this Slide. - PowerPoint PPT Presentation
Transcript of Do not include this Slide.
BUILDING STRONG®
Do not include this Slide.
This template is a guide for preparing power points presentations. The information requested is important and should be provided in generally the same sequence and same format. But each presentation must be tailored for the specific segment being presented. Some slides can be eliminated and sometimes extra slides will be necessary to best convey the background and backup data needed to make the case for the LSAC assignment. Pictures are generally a very good method for communicating information on a particular feature or defect being evaluated.
Some of the additional summary type slides will eventually be produced directly from the LST but until then you will have to cut and paste the data / graph into the power point.
Adjust font size, color, layout, tables, etc. as needed to improve the presentation. Do not overload your slides with too much information; It is better to add a slide.
Don’t be surprised to see future revisions to the Power Point.
The power point for the SOG will likely be a subset of this power point.
US Army Corps of Engineers
BUILDING STRONG®
Name of Levee Segment
Presenter Name
Presenter Title
Duty Location
Date of Presentation
BUILDING STRONG®
Levee Overview
USACE District Name of Segment Identify Segments relationship to Levee System
(Does Segment = System, or is it only a part of a bigger system.)
Segment ID from NLD Name of water course/river/creek Authorization / Project Identity of Owner Operator Dates of Construction (year) Population at Risk
BUILDING STRONG®
Location Map/Overview
BUILDING STRONG®
Vicinity/Segment Map
SEE EXAMPLE, NEXT SLIDE
BUILDING STRONG®
Vicinity/Segment Map
BUILDING STRONG®
Summarize HydraulicsUse graphics on following slide to present information
Frequency top of levee/floodwall or show on typical sections
Frequency toe of levee/floodwall or show on typical sections
Identify frequency of event that results in poor performance/history of problems
Summarize loading history – flood of record plus other major flood events
BUILDING STRONG®
Summary of Hydraulics
Authorized Capacity Frequency - xxx yr return period Overtopped: No / Yes Failured: No / Yes Times Loaded (events) 25% - xx 50% - xx 75% - xx
10 year return
1000 year return
Record Flood
66% of height
BUILDING STRONG®
Performance History
BUILDING STRONG®
Geomorphology / Foundation Geology
Present typical foundation / subsurface conditions in longitudinal profile and or cross sections to document section being assessed.
BUILDING STRONG®
Typical SectionsLevee Embankment
Elev. 718.7 ft 15ft
4.0
1.0
3.0
1.0
Riverside Landside
Toe Elevation 703.0
Approx Crest Height: xx-xx FtCrest Width: xx Ft Foundation Geology: Levee Materials /Zoning:Riverside Erosion Protection: Sod/Riprap
BUILDING STRONG®
Typical Flood Wall Section
BUILDING STRONG®
Typical Section with Culvert
BUILDING STRONG®
Example: Culverts/Closure
BUILDING STRONG®
Review of Assessment Ratings
Review/Compare ICW Rating with LST Rating in Table format
Highlight Primary Factors and other indicators needing attention / discussion.
Use table format similar to that shown on following slides. ADJUST TABLE COLUMN WIDTHS AS NEEDED
BUILDING STRONG®
EMBANKMENT SEEPAGE SUPPORTING PHOTOS
BUILDING STRONG®
Embankment Seepage Assessment Ratings
Performance Mode ICW Rating
LST Rating
Comment
Embankment and Foundation Seepage and Piping
Unwanted Vegetation Growth (1)
Encroachments (3)
Settlement (7)
Cracking (9)
Animal Control (10)
Culverts/Discharge Pipes (11)
Underseepage Relief Wells/Toe/Drainage Systems (14)
Seepage (15)
BUILDING STRONG®
EMBANKMENT STABILITY SUPPORTING PHOTOS
BUILDING STRONG®
Embankment Stability Assessment Ratings
Performance Mode ICW Rating
LST Rating
Comment
Embankment Stability
Unwanted Vegetation Growth (1)
Encroachments (3)
Slope Stability (5)
Settlement (7)
Depressions/Rutting (8)
Cracking (9)
Underseepage Relief Wells/Toe/Drainage Systems (14)
BUILDING STRONG®
FLOOD WALL SEEPAGE SUPPORTING PHOTOS
BUILDING STRONG®
Flood Wall Seepage Assessment Ratings
Performance Mode ICW Rating
LST Rating
Comment
Flood Wall Under Seepage and Piping
Culverts/Discharge Pipes (n/a)
Unwanted Vegetation Growth (1)
Encroachments (2)
Underseepage Relief Wells/Toe/Drainage Systems (8)
Seepage (9)
BUILDING STRONG®
FLOOD WALL STABILITY SUPPORTING PHOTOS
BUILDING STRONG®
Flood Wall Stability Assessment Ratings
Performance Mode ICW Rating
LST Rating
Comment
Flood Wall Stability
Unwanted Vegetation Growth (1)
Encroachments (2)
Concrete Surfaces (4)
Tilting, Sliding or Settlement of Concrete Structures (5)
Foundation of Concrete Structures (6)
Underseepage Relief Wells/Toe/Drainage Systems (8)
BUILDING STRONG®
CULVERTS AND CLOSURE SUPPORTING PHOTOS
BUILDING STRONG®
CULVERTS AND CLOSURE ASSESSMENT RATINGS
BUILDING STRONG®
Consequence Data Summary
Weighted Fatality Rate xxxx Threatened Population w/o warning xxxx Estimated Loss of Life w/o warning xxxx Number of structures Inundated xxxx Economic Damages $xxxxxx Critical Infrastructure / Environments
BUILDING STRONG®
Assessment Rating SummaryPrimary Factors
Embankment & Foundation Seepage - U,M,A
Embankment Stability - U,M,A
Erosion - U,M,A
Closure System - U,M,A
Flood Wall Stability - U,M,A
Flood Wall Under Seepage - U,M,A
BUILDING STRONG®
Major Contributors to Overall Risk Rating
BUILDING STRONG®
Major Contributors to Risk Prior to Capacity Exceedance
BUILDING STRONG®
Segment Ratings Compared to All Segments
BUILDING STRONG®
Performance Index vs LOL
BUILDING STRONG®
Performance Index vs Economic Damages
BUILDING STRONG®
Recommended LSAC Assignment
Prior to Capacity Exceedance LSAC = xx Capacity Exceedance LSAC = xx
Recommended LSAC = xx
Add Reasons for adjusting LSAC assignment
BUILDING STRONG®
Do not include this Slide.
This template is a guide for preparing power points presentations. The information requested is important and should be provided in generally the same sequence and same format. But each presentation must be tailored for the specific segment being presented. Some slides can be eliminated and sometimes extra slides will be necessary to best convey the background and backup data needed to make the case for the LSAC assignment. Pictures are generally a very good method for communicating information on a particular feature or defect being evaluated.
Some of the additional summary type slides will eventually be produced directly from the LST but until then you will have to cut and paste the data / graph into the power point.
Adjust font size, color, layout, tables, etc. as needed to improve the presentation. Do not overload your slides with too much information; It is better to add a slide.
Don’t be surprised to see future revisions to the Power Point.
The power point for the SOG will likely be a subset of this power point.
