Dmitrii Mironov 1 and Ekaterina Machulskaya 2
description
Transcript of Dmitrii Mironov 1 and Ekaterina Machulskaya 2
Development of the two-equation second-order turbulence-convection model (dry version):
analytical formulation, single-column numerical results, and problems encountered
Dmitrii Mironov1 and Ekaterina Machulskaya2
1 German Weather Service, Offenbach am Main, Germany2 Hydrometeorological Centre of Russian Federation, Moscow, Russia
[email protected], [email protected]
COSMO General Meeting, Krakow, Poland 15-19 September 2008
Recall … (UTCS PP Plan for 2007-2008) Task 1a: Goals, Key Issues, Expected Outcome
Goals
• Development and testing of a two-equation model of a temperature-stratified PBL
• Comparison of two-equations (TKE+TPE) and one-equation (TKE only) models
Key issues
• Parameterisation of the pressure terms in the Reynolds-stress and the scalar-flux equations
• Parameterisation of the third-order turbulent transport in the equations for the kinetic and potential energies of fluctuating motions
• Realisability, stable performance of the two-equation model
Expected outcome
• Counter gradient heat flux in the mid-PBL • Improved representation of entrainment at the PBL top
One-Equation Model vs. Two-Equation Model – Key Differences
Equation for <’2>,
.2
1
2
1 22
wzz
wt
Production = Dissipation (implicit in all models that carry the TKE equations only).
Equation for <w’’>,
No counter-gradient term.
.13
2 2
gCCz
eCw pbuu
Convective Boundary Layer
• Shear-free (zero geostrophic wind) and sheared (10 m/s geostrophic wind)• Domain size: 4000 m, vertical grid size: 1 m, time step: 1 s, simulation
length: 4 h • Lower b.c. for : constant surface temperature (heat) flux of 0.24 K·m/s • Upper b.c. for : constant temperature gradient of 3·10-3 K/m • Lower b.c. for U: no-slip, logarithmic resistance law to compute surface
friction velocity • Upper b.c. for U: wind velocity is equal to geostrophic velocity • Initial temperature profile: height-constant temperature within a 780 m
deep PBL, linear temperature profile aloft with the lapse rate of 3·10-3 K/m • Initial TKE profile: similarity relations in terms of z/h • Initial <’2> profile: zero throughout the domain • Turbulence moments are made dimensionless with the Deardorff (1970)
convective velocity scales h, w*=(g<w’’>sfc)1/3 and * =<w’’>sfc/ w*
Mean Temperature in Shear-Free Convective
PBL
One-Equation and Two-Equation Models
Red – one-equation model, green – two-equation model, blue – one-equation model with the Blackadar (1962) formulation for the turbulence length scale. Black curve shows the initial temperature profile.
Mean Temperature in Shear-Free Convective PBL
(cont’d)
One-Equation and Two-Equation Models
vs. LES Data
Potential temperature minus its minimum value within the PBL. Black dashed curve shows LES data (Mironov et al. 2000), red – one-equation model, green – two-equation model, blue – one-equation model with the Blackadar (1962) formulation for the turbulence length scale.
Potential-Temperature (Heat) Flux in Shear-Free Convective PBL
One-Equation and Two-
Equation Models vs. LES Data
<w’’> made dimensionless with w**. Black dashed curve shows LES data, red – one-equation model, green – two-equation model, blue – one-equation model with the Blackadar formulation for the turbulence length scale.
Budget of Potential-Temperature Variance in Shear-Free Convective PBL
One-Equation and Two-Equation Models vs. LES Data
Solid curves – two-equation model, dashed curves – LES data.
Red – mean-gradient production/destruction, green – third-order transport, blue – dissipation. The budget terms are made dimensionless with *
2w*/h.
Counter-gradient heat flux
Stably Stratified Boundary Layer
• Wind forcing: 2 m/s geostrophic wind • Domain height: 2000 m, vertical grid size: 1 m, time step: 1 s, simulation
length: 24 h • Lower b.c. for <’2>: (a) zero flux, <w’’2>sfc=0 K2·m/s, (b) non-zero flux,
<w’’2>sfc=0.5 K2·m/s • Lower b.c. for : radiation-turbulent heat transport equilibrium,
Tr4+Ts
4+<w’’>sfc=0, logarithmic heat transfer law to compute the surface heat flux as function of the temperature difference between the surface and the first model level above the surface
• Upper b.c. for : constant temperature gradient of 3·10-3 K/m • Lower b.c. for U: no-slip, logarithmic resistance law to compute surface friction
velocity • Upper b.c. for U: wind velocity is equal to geostrophic velocity• Initial temperature profile: log-linear with 15 K temperature difference across a
200 m deep PBL, linear temperature profile aloft with the lapse rate of 3·10-3 K/m
• Initial profiles of TKE and <’2>: similarity relations in terms of z/h
Effect of Horizontal Inhomogeneity of the Underlying Surfacewith Respect to the Temperature
Equation for <’2>,
.2
1
2
1 22
wzz
wt
Within the framework of one-equation model, <w’’2> is entirely neglected
Within the framework of two-equation model, <w’’2> is non-zero (transport of <’2> within the PBL) and may be non-zero at the surface (effect of horizontal inhmomogeneity)
TKE and Potential-Temperature Variance in Stably Stratified PBL (strongly stable)
Left panel – TKE, right panel – <’2>. Red – one-equation model, solid green – two-equation model, dashed green – two-equation model with non-zero <’2> flux.
Conclusions and Outlook
• A dry version of a two-equation turbulence-convection model is developed and favourably tested through single-column numerical experiments
• A number of problems with the new two-equation model have been encountered that require further consideration (sensitivity to the formulation of turbulence length/time scale, consistent formulation of “stability functions”, realisability)
Ongoing and Future Work• Consolidation of a dry version of the two-equation model (c/o
Ekaterina and Dmitrii), including further testing against LES data from stably stratified PBL (c/o Dmitrii in co-operation with NCAR)
• Formulation and testing of a moist version of the new model
Thank you for your attention!