Dme Concepts
-
Upload
mahesh-devasigamani -
Category
Documents
-
view
60 -
download
3
Transcript of Dme Concepts
![Page 1: Dme Concepts](https://reader035.fdocuments.in/reader035/viewer/2022081717/553448045503463b508b4af5/html5/thumbnails/1.jpg)
DESIGN CONCEPT CLASS FOR MECHANICAL ENGINEERING STUDENTS
By
K.S.K.Sasikumar
Assistant professor
Department of mechanical engineering
Kongu engineering college
![Page 2: Dme Concepts](https://reader035.fdocuments.in/reader035/viewer/2022081717/553448045503463b508b4af5/html5/thumbnails/2.jpg)
Stresses in machine elements
• Stresses are developed in machine elements due to applied load and machine design involves ensuring that the elements can sustain the induced stresses without yielding.
![Page 3: Dme Concepts](https://reader035.fdocuments.in/reader035/viewer/2022081717/553448045503463b508b4af5/html5/thumbnails/3.jpg)
Tensile stress
Compressive stress
![Page 4: Dme Concepts](https://reader035.fdocuments.in/reader035/viewer/2022081717/553448045503463b508b4af5/html5/thumbnails/4.jpg)
stresses
Lever arms AB and AC - Bending stresses Hinge pin - Shear and bearing stresses. Spring - Shear stress.
![Page 5: Dme Concepts](https://reader035.fdocuments.in/reader035/viewer/2022081717/553448045503463b508b4af5/html5/thumbnails/5.jpg)
Bearing stress When a body is pressed against another, the compressive stress developed is termed bearing stress.
![Page 6: Dme Concepts](https://reader035.fdocuments.in/reader035/viewer/2022081717/553448045503463b508b4af5/html5/thumbnails/6.jpg)
Shear stress
![Page 7: Dme Concepts](https://reader035.fdocuments.in/reader035/viewer/2022081717/553448045503463b508b4af5/html5/thumbnails/7.jpg)
Bending stresses
![Page 8: Dme Concepts](https://reader035.fdocuments.in/reader035/viewer/2022081717/553448045503463b508b4af5/html5/thumbnails/8.jpg)
Bending stress
![Page 9: Dme Concepts](https://reader035.fdocuments.in/reader035/viewer/2022081717/553448045503463b508b4af5/html5/thumbnails/9.jpg)
Torsion of circular members
![Page 10: Dme Concepts](https://reader035.fdocuments.in/reader035/viewer/2022081717/553448045503463b508b4af5/html5/thumbnails/10.jpg)
Buckling
![Page 11: Dme Concepts](https://reader035.fdocuments.in/reader035/viewer/2022081717/553448045503463b508b4af5/html5/thumbnails/11.jpg)
Compound stresses in machine parts
![Page 12: Dme Concepts](https://reader035.fdocuments.in/reader035/viewer/2022081717/553448045503463b508b4af5/html5/thumbnails/12.jpg)
Superposition of stresses due to axial force and bending moment
![Page 13: Dme Concepts](https://reader035.fdocuments.in/reader035/viewer/2022081717/553448045503463b508b4af5/html5/thumbnails/13.jpg)
Example
![Page 14: Dme Concepts](https://reader035.fdocuments.in/reader035/viewer/2022081717/553448045503463b508b4af5/html5/thumbnails/14.jpg)
Stress Concentration
Any such discontinuity in a member affects the stress distribution in the neighbourhood and the discontinuity acts as a stress raiser.
![Page 15: Dme Concepts](https://reader035.fdocuments.in/reader035/viewer/2022081717/553448045503463b508b4af5/html5/thumbnails/15.jpg)
![Page 16: Dme Concepts](https://reader035.fdocuments.in/reader035/viewer/2022081717/553448045503463b508b4af5/html5/thumbnails/16.jpg)
Methods of reducing stress concentration
![Page 17: Dme Concepts](https://reader035.fdocuments.in/reader035/viewer/2022081717/553448045503463b508b4af5/html5/thumbnails/17.jpg)
![Page 18: Dme Concepts](https://reader035.fdocuments.in/reader035/viewer/2022081717/553448045503463b508b4af5/html5/thumbnails/18.jpg)
Flat Belt drives
![Page 19: Dme Concepts](https://reader035.fdocuments.in/reader035/viewer/2022081717/553448045503463b508b4af5/html5/thumbnails/19.jpg)
Belt Material
Leather
Oak tanned or chrome tanned.
Rubber
Canvas or cotton duck impregnated with rubber. For greater
tensile strength, the rubber belts are reinforced with steel
cords or nylon cords.
Plastics
Thin plastic sheets with rubber layers
Fabric
Canvas or woven cotton ducks
Ply of belt:
The belt thickness can be built up with a number of layers.
The number of layers is known as ply.
![Page 20: Dme Concepts](https://reader035.fdocuments.in/reader035/viewer/2022081717/553448045503463b508b4af5/html5/thumbnails/20.jpg)
V- Belt drives
![Page 21: Dme Concepts](https://reader035.fdocuments.in/reader035/viewer/2022081717/553448045503463b508b4af5/html5/thumbnails/21.jpg)
Standard V-belt sections
![Page 22: Dme Concepts](https://reader035.fdocuments.in/reader035/viewer/2022081717/553448045503463b508b4af5/html5/thumbnails/22.jpg)
couplings
Sleeve coupling
![Page 23: Dme Concepts](https://reader035.fdocuments.in/reader035/viewer/2022081717/553448045503463b508b4af5/html5/thumbnails/23.jpg)
Shear plane
![Page 24: Dme Concepts](https://reader035.fdocuments.in/reader035/viewer/2022081717/553448045503463b508b4af5/html5/thumbnails/24.jpg)
Sleeve coupling with taper pins
![Page 25: Dme Concepts](https://reader035.fdocuments.in/reader035/viewer/2022081717/553448045503463b508b4af5/html5/thumbnails/25.jpg)
Clamp coupling
![Page 26: Dme Concepts](https://reader035.fdocuments.in/reader035/viewer/2022081717/553448045503463b508b4af5/html5/thumbnails/26.jpg)
Ring compression type couplings
![Page 27: Dme Concepts](https://reader035.fdocuments.in/reader035/viewer/2022081717/553448045503463b508b4af5/html5/thumbnails/27.jpg)
Flange coupling
![Page 28: Dme Concepts](https://reader035.fdocuments.in/reader035/viewer/2022081717/553448045503463b508b4af5/html5/thumbnails/28.jpg)
Flexible rubber – bushed couplings
![Page 29: Dme Concepts](https://reader035.fdocuments.in/reader035/viewer/2022081717/553448045503463b508b4af5/html5/thumbnails/29.jpg)
Oldham coupling
![Page 30: Dme Concepts](https://reader035.fdocuments.in/reader035/viewer/2022081717/553448045503463b508b4af5/html5/thumbnails/30.jpg)
Universal joints
![Page 31: Dme Concepts](https://reader035.fdocuments.in/reader035/viewer/2022081717/553448045503463b508b4af5/html5/thumbnails/31.jpg)
Design for Strength
Loading may be due to:
a) The energy transmitted by a machine element.
b) Dead weight.
c) Inertial forces.
d) Thermal loading.
e) Frictional forces.
![Page 32: Dme Concepts](https://reader035.fdocuments.in/reader035/viewer/2022081717/553448045503463b508b4af5/html5/thumbnails/32.jpg)
stresses
![Page 33: Dme Concepts](https://reader035.fdocuments.in/reader035/viewer/2022081717/553448045503463b508b4af5/html5/thumbnails/33.jpg)
Types of loading
![Page 34: Dme Concepts](https://reader035.fdocuments.in/reader035/viewer/2022081717/553448045503463b508b4af5/html5/thumbnails/34.jpg)
Factor of safety
![Page 35: Dme Concepts](https://reader035.fdocuments.in/reader035/viewer/2022081717/553448045503463b508b4af5/html5/thumbnails/35.jpg)
Stress vs strain
![Page 36: Dme Concepts](https://reader035.fdocuments.in/reader035/viewer/2022081717/553448045503463b508b4af5/html5/thumbnails/36.jpg)
Theories of failure
• Maximum principal stress theory ( Rankine theory)
• Maximum principal strain theory (St. Venant’s theory)
• Maximum shear stress theory ( Tresca theory)
• Maximum strain energy theory ( Beltrami’s theory)
• Distortion energy theory( von Mises yield criterion)
![Page 37: Dme Concepts](https://reader035.fdocuments.in/reader035/viewer/2022081717/553448045503463b508b4af5/html5/thumbnails/37.jpg)
Design of shoe brakes
Types of brakes
• Shoe or block brakes – braking force applied radially
• Band brakes – braking force applied tangentially.
• Disc brake – braking force applied axially
![Page 38: Dme Concepts](https://reader035.fdocuments.in/reader035/viewer/2022081717/553448045503463b508b4af5/html5/thumbnails/38.jpg)
Shoe or block brake
![Page 39: Dme Concepts](https://reader035.fdocuments.in/reader035/viewer/2022081717/553448045503463b508b4af5/html5/thumbnails/39.jpg)
Double block brake
![Page 40: Dme Concepts](https://reader035.fdocuments.in/reader035/viewer/2022081717/553448045503463b508b4af5/html5/thumbnails/40.jpg)
Internal expanding shoe brake
![Page 41: Dme Concepts](https://reader035.fdocuments.in/reader035/viewer/2022081717/553448045503463b508b4af5/html5/thumbnails/41.jpg)
External contracting shoe brake
![Page 42: Dme Concepts](https://reader035.fdocuments.in/reader035/viewer/2022081717/553448045503463b508b4af5/html5/thumbnails/42.jpg)
Band brakes:
• Simple band brake:
![Page 43: Dme Concepts](https://reader035.fdocuments.in/reader035/viewer/2022081717/553448045503463b508b4af5/html5/thumbnails/43.jpg)
Differential band brake:
![Page 44: Dme Concepts](https://reader035.fdocuments.in/reader035/viewer/2022081717/553448045503463b508b4af5/html5/thumbnails/44.jpg)
Welded joints and their advantages
• (i) Compared to other type of joints, the welded joint has higher efficiency. An efficiency > 95 % is easily possible.
• (ii) Since the added material is minimum, the joint has lighter weight.
• (iii) Welded joints have smooth appearances.
• (iv) Due to flexibility in the welding procedure, alteration and addition are possible.
• (v) It is less expensive.
• (vi) Forming a joint in difficult locations is possible through welding.
![Page 45: Dme Concepts](https://reader035.fdocuments.in/reader035/viewer/2022081717/553448045503463b508b4af5/html5/thumbnails/45.jpg)
Typically welded machine components
• Pressure vessels, steel structures.
• Flanges welded to shafts and axles.
• Crank shafts
• Heavy hydraulic turbine shafts
• Large gears, pulleys, flywheels
• Gear housing
• Machine frames and bases
• Housing and mill-stands.
![Page 46: Dme Concepts](https://reader035.fdocuments.in/reader035/viewer/2022081717/553448045503463b508b4af5/html5/thumbnails/46.jpg)
Basic types of welded processes
• Liquid state (fusion) welding
where heat is added to the base metals until they melt. Added metal (filler material) may also be supplied. Upon cooling strong joint is formed.
Depending upon the method of heat addition this process can be further subdivided, namely
![Page 47: Dme Concepts](https://reader035.fdocuments.in/reader035/viewer/2022081717/553448045503463b508b4af5/html5/thumbnails/47.jpg)
• Electrical heating: Arc welding
• Resistance welding Induction welding – Chemical welding: Gas welding
• Thermit welding – Laser welding
– Electron beam welding
![Page 48: Dme Concepts](https://reader035.fdocuments.in/reader035/viewer/2022081717/553448045503463b508b4af5/html5/thumbnails/48.jpg)
Solid state welding:
Here mechanical force is applied until materials deform to plastic state. Bonds are then formed through molecular interaction. Solid state welding may be of various kinds, namely, Cold welding Diffusion welding Hot forging
![Page 49: Dme Concepts](https://reader035.fdocuments.in/reader035/viewer/2022081717/553448045503463b508b4af5/html5/thumbnails/49.jpg)
Strength of welded joints:
strength of a welded joint gets affected mainly by the following factors.
(i) Crack initiation: it is possible that cracks form while cooling a
melted metal.
(ii) Residual stresses: due to inhomogeneous heating of the base metals, residual stresses may exist upon cooling.
(iii) Metallurgical transformation: in heat affected zone (HAZ)
metallurgical properties may change leading to weakening of the joint. (iv) Defects: of various kinds like incomplete penetration, porosity, slag
inclusion which affect the strength of a welded joint. (v) Stress concentration: abrupt change in the geometry after welding
may introduce stress concentration in the structure.
![Page 50: Dme Concepts](https://reader035.fdocuments.in/reader035/viewer/2022081717/553448045503463b508b4af5/html5/thumbnails/50.jpg)
Types of welded joints:
![Page 51: Dme Concepts](https://reader035.fdocuments.in/reader035/viewer/2022081717/553448045503463b508b4af5/html5/thumbnails/51.jpg)
![Page 52: Dme Concepts](https://reader035.fdocuments.in/reader035/viewer/2022081717/553448045503463b508b4af5/html5/thumbnails/52.jpg)
![Page 53: Dme Concepts](https://reader035.fdocuments.in/reader035/viewer/2022081717/553448045503463b508b4af5/html5/thumbnails/53.jpg)
Butt joints
Square butt joint Single V-butt joint, double V-butt joint Single U-butt joint, double U-butt joint Single J-butt joint, double J-butt joint Single bevel-butt joint, double bevel butt joint
![Page 54: Dme Concepts](https://reader035.fdocuments.in/reader035/viewer/2022081717/553448045503463b508b4af5/html5/thumbnails/54.jpg)
Butt joints
![Page 55: Dme Concepts](https://reader035.fdocuments.in/reader035/viewer/2022081717/553448045503463b508b4af5/html5/thumbnails/55.jpg)
Other types of joint
![Page 56: Dme Concepts](https://reader035.fdocuments.in/reader035/viewer/2022081717/553448045503463b508b4af5/html5/thumbnails/56.jpg)
Weld symbols
![Page 57: Dme Concepts](https://reader035.fdocuments.in/reader035/viewer/2022081717/553448045503463b508b4af5/html5/thumbnails/57.jpg)
Welding symbol
![Page 58: Dme Concepts](https://reader035.fdocuments.in/reader035/viewer/2022081717/553448045503463b508b4af5/html5/thumbnails/58.jpg)
Design of a butt joint:
The main failure mechanism of welded butt joint is tensile failure
![Page 59: Dme Concepts](https://reader035.fdocuments.in/reader035/viewer/2022081717/553448045503463b508b4af5/html5/thumbnails/59.jpg)
Transverse fillet joint:
![Page 60: Dme Concepts](https://reader035.fdocuments.in/reader035/viewer/2022081717/553448045503463b508b4af5/html5/thumbnails/60.jpg)
Parallel fillet joint:
![Page 61: Dme Concepts](https://reader035.fdocuments.in/reader035/viewer/2022081717/553448045503463b508b4af5/html5/thumbnails/61.jpg)
Circular fillet weld subjected to torsion:
![Page 62: Dme Concepts](https://reader035.fdocuments.in/reader035/viewer/2022081717/553448045503463b508b4af5/html5/thumbnails/62.jpg)
Riveted Joints : Types and Uses
Mechanical joints are broadly classified into two classes viz.,
non-permanent joints
permanent joints.
![Page 63: Dme Concepts](https://reader035.fdocuments.in/reader035/viewer/2022081717/553448045503463b508b4af5/html5/thumbnails/63.jpg)
Rivets and Riveting:
![Page 64: Dme Concepts](https://reader035.fdocuments.in/reader035/viewer/2022081717/553448045503463b508b4af5/html5/thumbnails/64.jpg)
Riveted joints are mainly of two types
Lap joints
Butt joints
![Page 65: Dme Concepts](https://reader035.fdocuments.in/reader035/viewer/2022081717/553448045503463b508b4af5/html5/thumbnails/65.jpg)
Lap joint
![Page 66: Dme Concepts](https://reader035.fdocuments.in/reader035/viewer/2022081717/553448045503463b508b4af5/html5/thumbnails/66.jpg)
Butt joint
![Page 67: Dme Concepts](https://reader035.fdocuments.in/reader035/viewer/2022081717/553448045503463b508b4af5/html5/thumbnails/67.jpg)
Important terms used in riveted joints
a) Pitch: This is the distance between two centers of
the consecutive rivets in a single row. (usual symbol p)
b) Back Pitch: This is the shortest distance between two successive rows in a multiple riveted joint. (usual symbol pt or pb)
c) Diagonal pitch: This is the distance between the centers of rivets in adjacent rows of zigzag riveted joint. (usual symbol pd)
d) Margin or marginal pitch: This is the distance between the centre of the rivet hole to the nearest edge of the plate. (usual symbol m)
![Page 68: Dme Concepts](https://reader035.fdocuments.in/reader035/viewer/2022081717/553448045503463b508b4af5/html5/thumbnails/68.jpg)
![Page 69: Dme Concepts](https://reader035.fdocuments.in/reader035/viewer/2022081717/553448045503463b508b4af5/html5/thumbnails/69.jpg)
Design of shaft
• Design based on Stiffness
In the context of shaft, design for stiffness means that the lateral deflection of the shaft and/or angle of twist of the shaft should be within some prescribed limit.
![Page 70: Dme Concepts](https://reader035.fdocuments.in/reader035/viewer/2022081717/553448045503463b508b4af5/html5/thumbnails/70.jpg)
Torsional rigidity
![Page 71: Dme Concepts](https://reader035.fdocuments.in/reader035/viewer/2022081717/553448045503463b508b4af5/html5/thumbnails/71.jpg)
Helical Springs • Commonly used spring materials Hard-drawn wire: • This is cold drawn, cheapest spring steel. Normally used for low stress and static
load. The material is not suitable at subzero temperatures or at temperatures above 1200C.
Oil-tempered wire: • It is a cold drawn, quenched, tempered, and general purpose spring steel.
However, it is not suitable for fatigue or sudden loads, at subzero temperatures and at temperatures above 1800C.
• When we go for highly stressed conditions then alloy steels are useful. Chrome Vanadium: • This alloy spring steel is used for high stress conditions and at high temperature up
to 2200C. It is good for fatigue resistance and long endurance for shock and impact loads.
Chrome Silicon: • This material can be used for highly stressed springs. It offers excellent service for
long life, shock loading and for temperature up to 2500C. Music wire: • This spring material is most widely used for small springs. It is the toughest and has
highest tensile strength and can withstand repeated loading at high stresses. However, it can not be used at subzero temperatures or at temperatures above 1200C.
![Page 72: Dme Concepts](https://reader035.fdocuments.in/reader035/viewer/2022081717/553448045503463b508b4af5/html5/thumbnails/72.jpg)
Spring manufacturing processes
If springs are of very small diameter and the wire diameter is also small then the springs are normally manufactured by a cold drawn process through a mangle.
However, for very large springs having also large coil diameter and wire diameter one has to go for manufacture by hot processes. First one has to heat the wire and then use a proper mangle to wind the coils.
![Page 73: Dme Concepts](https://reader035.fdocuments.in/reader035/viewer/2022081717/553448045503463b508b4af5/html5/thumbnails/73.jpg)
Forces in spring
![Page 74: Dme Concepts](https://reader035.fdocuments.in/reader035/viewer/2022081717/553448045503463b508b4af5/html5/thumbnails/74.jpg)
Laminated leaf springs
![Page 75: Dme Concepts](https://reader035.fdocuments.in/reader035/viewer/2022081717/553448045503463b508b4af5/html5/thumbnails/75.jpg)
Materials for leaf spring
Plain carbon steel,
Chromium vanadium steel,
Chromium- Nickel- Molybdenum steel,
Silicon- manganese steel,
![Page 76: Dme Concepts](https://reader035.fdocuments.in/reader035/viewer/2022081717/553448045503463b508b4af5/html5/thumbnails/76.jpg)
Methods to reduce additional stresses
1. Master leaf is made of stronger material than the other leaves.
2. Master leaf is made thinner than the other leaves. This will reduce the bending stress as evident from stress equation.
3. Another common practice is to increase the radius of curvature of the master leaf than the next leaf.
![Page 77: Dme Concepts](https://reader035.fdocuments.in/reader035/viewer/2022081717/553448045503463b508b4af5/html5/thumbnails/77.jpg)
Nipping of leaf spring
![Page 78: Dme Concepts](https://reader035.fdocuments.in/reader035/viewer/2022081717/553448045503463b508b4af5/html5/thumbnails/78.jpg)
overview of bearings
Fluid Film bearings
In fluid film bearing the entire load of the shaft is carried by a thin film of fluid present between the rotating and non-rotating elements.
The types of fluid film bearings are as follows,
• Sliding contact type
• Journal bearing
• Thrust bearing
• Slider bearing
![Page 79: Dme Concepts](https://reader035.fdocuments.in/reader035/viewer/2022081717/553448045503463b508b4af5/html5/thumbnails/79.jpg)
Rolling contact bearings
In rolling contact bearings, the rotating shaft load is carried by a series of balls or rollers placed between rotating and non-rotating elements.
The rolling contact type bearings are of two types, namely,
• Ball bearing
• Roller bearing
![Page 80: Dme Concepts](https://reader035.fdocuments.in/reader035/viewer/2022081717/553448045503463b508b4af5/html5/thumbnails/80.jpg)
Journal Bearing
![Page 81: Dme Concepts](https://reader035.fdocuments.in/reader035/viewer/2022081717/553448045503463b508b4af5/html5/thumbnails/81.jpg)
Materials for bearing • The common materials used for bearings are listed below.
• Lead based babbits : around 85 % Lead; rest are tin, antimony and copper (pressure rating not exceeding 14MPa)
• Tin based babbits : around 90% tin; rest are copper, antimony and lead (pressure rating not exceeding 14MPa)
• Phosphor bronze : major composition copper; rest is tin, lead, phosphorus (pressure rating not exceeding 14MPa)
• Gun metal : major composition copper; rest is tin and zinc (pressure rating not exceeding 10MPa)
• Cast iron : pressure rating not exceeding 3.5 MPa
• Other materials commonly used are, silver, carbon-graphite, teflon etc.
![Page 82: Dme Concepts](https://reader035.fdocuments.in/reader035/viewer/2022081717/553448045503463b508b4af5/html5/thumbnails/82.jpg)
Rolling contact bearings • Rolling contact bearings are also called anti-
friction bearing due to its low friction characteristics. These bearings are used for radial load, thrust load and combination of thrust and radial load. These bearings are extensively used due to its relatively lower price, being almost maintenance free and for its operational ease. However, friction increases at high speeds for rolling contact bearings and it may be noisy while running. These bearings are of two types,
• Ball bearing and Roller bearing
![Page 83: Dme Concepts](https://reader035.fdocuments.in/reader035/viewer/2022081717/553448045503463b508b4af5/html5/thumbnails/83.jpg)
Ball bearing
![Page 84: Dme Concepts](https://reader035.fdocuments.in/reader035/viewer/2022081717/553448045503463b508b4af5/html5/thumbnails/84.jpg)
A typical arrangement for housing a
bearing
![Page 85: Dme Concepts](https://reader035.fdocuments.in/reader035/viewer/2022081717/553448045503463b508b4af5/html5/thumbnails/85.jpg)
Single row Angular Contact Ball Bearing
It is mostly used for radial loads and heavy axial loads.
![Page 86: Dme Concepts](https://reader035.fdocuments.in/reader035/viewer/2022081717/553448045503463b508b4af5/html5/thumbnails/86.jpg)
Double Row Angular Contact Bearing
has two rows of balls. Axial displacement of the shaft can be kept very small even for axial loads of varying magnitude.
![Page 87: Dme Concepts](https://reader035.fdocuments.in/reader035/viewer/2022081717/553448045503463b508b4af5/html5/thumbnails/87.jpg)
Single thrust ball bearing
It is mostly used for unidirectional axial load.
![Page 88: Dme Concepts](https://reader035.fdocuments.in/reader035/viewer/2022081717/553448045503463b508b4af5/html5/thumbnails/88.jpg)
Taper Roller Bearing
It is generally used for simultaneous heavy radial load and heavy axial load. Roller bearings has more contact area than a ball bearing, therefore, they are generally used for heavier loads than the ball bearings.
![Page 89: Dme Concepts](https://reader035.fdocuments.in/reader035/viewer/2022081717/553448045503463b508b4af5/html5/thumbnails/89.jpg)
Spherical Roller Bearing
It is mainly used for heavy axial loads. However, considerable amount of loads in either direction can also be applied.
![Page 90: Dme Concepts](https://reader035.fdocuments.in/reader035/viewer/2022081717/553448045503463b508b4af5/html5/thumbnails/90.jpg)
Cylindrical Roller Bearing
For heavy radial load and high speed use, cylindrical roller bearings,
Within certain limit, relative axial displacement of the shaft and the bearing housing is permitted for this type of bearings.
![Page 91: Dme Concepts](https://reader035.fdocuments.in/reader035/viewer/2022081717/553448045503463b508b4af5/html5/thumbnails/91.jpg)
Threaded Fasteners
• Bolts: They are basically threaded fasteners normally used with nuts.
• Screws: They engage either with a preformed or a self made internal threads.
• Studs: They are externally threaded headless fasteners. One end usually meets
![Page 92: Dme Concepts](https://reader035.fdocuments.in/reader035/viewer/2022081717/553448045503463b508b4af5/html5/thumbnails/92.jpg)
Types of screw heads
![Page 93: Dme Concepts](https://reader035.fdocuments.in/reader035/viewer/2022081717/553448045503463b508b4af5/html5/thumbnails/93.jpg)
Types of bolt heads
![Page 94: Dme Concepts](https://reader035.fdocuments.in/reader035/viewer/2022081717/553448045503463b508b4af5/html5/thumbnails/94.jpg)
Set screws
![Page 95: Dme Concepts](https://reader035.fdocuments.in/reader035/viewer/2022081717/553448045503463b508b4af5/html5/thumbnails/95.jpg)
Thread forms