DMC635 SAAB 340 Kit - dmctools
2
SAAB 340 The SAAB 340 is a Swedish twin-engine turboprop aircraft manufactured by SAAB 340. The SAAB 340 is designed for many diverse demands that require complex electrical wiring systems containing many different connectors, contacts and terminals. Proper maintenance and repair of these electrical systems require precision tools. To protect your investment, DMC offers a comprehensive maintenance kit to service the wiring systems of the SABB 340. DMC635 MAINTENANCE KIT The DMC635 SAAB 340 Wiring System Service Kit provides a turn-key solution and the tools necessary to strip, crimp, install and remove the typical contacts and terminals of this wiring system. The DMC635 kit includes the tool to application cross-reference information that indicates the particular tool(s) that should be selected to repair a specific connector, contact, or terminal. In addition, the kit also contains illustrated operating instructions for the designated tooling. COMPREHENSIVE SOLUTION FOR MAINTENANCE AND REPAIR DMC believes in providing a comprehensive, turn-key solution for electrical wire maintenance and repair. Since these tools, together with their operating instructions, are contained in a single kit, the connector repair can be made in the shortest time possible, thus permitting a rapid return of your aircraft to service. Tool kit supplied in one environmentally sealed case and includes: Name Plate, Foam Pads/Inserts, Contents Charts, Instruction Sheets, and Tool Selection Charts. Actual Kit may vary from example shown. Instruction Sheets Tool Selection Charts DMC635 SAAB 340 Kit 03/21 DMC635-SL REV 3 VER 1 COPYRIGHT © 2021 Daniels Manufacturing Corp. ALL RIGHTS RESERVED DANIELS MANUFACTURING CORP., 526 THORPE ROAD, ORLANDO, FL 32824, USA PHONE (407) 855-6161 • FAX (407) 855-6884 • www.dmctools.com • E-MAIL: [email protected] DMC635 for the SAAB 340 Kit
Transcript of DMC635 SAAB 340 Kit - dmctools
SAAB 340 The SAAB 340 is a Swedish twin-engine turboprop aircraft manufactured by
SAAB 340. The SAAB 340 is designed for many diverse demands that require complex electrical wiring systems containing many different connectors, contacts and terminals. Proper maintenance and repair of these electrical systems require precision tools. To protect your investment, DMC offers a comprehensive maintenance kit to service the wiring systems of the SABB 340.
DMC635 MAINTENANCE KITThe DMC635 SAAB 340 Wiring System Service Kit provides a turn-key solution and the tools necessary to strip, crimp, install and remove the typical contacts and terminals of this wiring system. The DMC635 kit includes the tool to application cross-reference information that indicates the particular tool(s) that should be selected to repair a specific connector, contact, or terminal. In addition, the kit also contains illustrated operating instructions for the designated tooling.
COMPREHENSIVE SOLUTION FOR MAINTENANCE AND REPAIR DMC believes in providing a comprehensive, turn-key solution for electrical wire maintenance and repair. Since these tools, together with their operating instructions, are contained in a single kit, the connector repair can be made in the shortest time possible, thus permitting a rapid return of your aircraft to service. Tool kit supplied in one environmentally sealed case and includes: Name Plate, Foam Pads/Inserts, Contents Charts, Instruction Sheets, and Tool Selection Charts.
Actual Kit may vary from example shown.Instruction Sheets
Tool Selection Charts
DMC635SAAB 340 Kit
03/21 DMC635-SL REV 3 VER 1COPYRIGHT © 2021 Daniels Manufacturing Corp. ALL RIGHTS RESERVED
DANIELS MANUFACTURING CORP., 526 THORPE ROAD, ORLANDO, FL 32824, USAPHONE (407) 855-6161 • FAX (407) 855-6884 • www.dmctools.com • E-MAIL: [email protected]
DMC635 for theSAAB 340 Kit
03/21 DMC635-SL REV 3 VER 1COPYRIGHT © 2021 Daniels Manufacturing Corp. ALL RIGHTS RESERVED
DANIELS MANUFACTURING CORP., 526 THORPE ROAD, ORLANDO, FL 32824, USAPHONE (407) 855-6161 • FAX (407) 855-6884 • www.dmctools.com • E-MAIL: [email protected]
DMC635SAAB 340 Kit
DMC CONNECTOR COVERAGEMANUFACTURER SERIES
Air LB Terminal Junctions
AMP Multimate Series II
Burndy Terminal Blocks
Cinch Connector Jones 300 Series
Collins Twin Line II Series
Deutsch CTS Series
ITT Cannon DL, DPAMA, DPX*MA, KPTM, PV, XLR
Positronics GMCT Series
Raychem Terminal Splices
Viking Relay Sockets
MIL-DTL-24308 Rectangular
MIL-DTL-26482 Series I & II
MIL-DTL-38999 Series I & II
MIL-DTL-81659 Series II
MIL-DTL-83723 Series III
AS50151 Series MS3100, MS3450
MIL-S-81824 Environmental Splices
MIL-T-7928 Type II Class I Size 12-10 AWG and Smaller
Military Standard MS/AN
KIT CONTENTS8 Crimp Tools
8 Positioners
4 Turret Heads
1 Single Position Head
2 Die Sets
1 In-Service Inspection Gage
12 Metal Insertion Tools
14 Metal Removal Tools
1 Metal Insertion/Removal Tool
60 Plastic Insertion/Removal Tools
4 Contact Gages
2 Unwired Contact Removal Tools w/ Probes
1 Wire Cutter
4 Wire Strippers
1 Coaxial Wire Stripper
1 Die Removal Tool
1 Hex Wrench
Coverage: Airframe Power Connectors, Terminals size 12 AWG and Smaller, Coaxial ConnectorsType of Inserts: Unicellular Polyethylene Foam with Die Cut Tool CavitiesType of Construction: 1 Yellow Fiberglass/Aluminum Case
NOTICE: Unless otherwise stated by DMC, tools contained in this kit have been selected based upon their suitability to service the related connector or contact indicated at the time of design. Military Standard tools have been utilized wherever possible. These tools are not necessarily the production tools used to manufacture the aircraft and therefore, these tools may or may not correspond to the tools listed in the OEM wiring manual and/or the Chapter 20 Standard Wiring Practices Manual list of approved tooling. Verification Is Required.
Refurbishment ServicesTo ensure the longevity of your investment, DMC offers kit refurbishment and calibration services. Contact DMC for details.
