An ISA – FEEDBACK Document ISA Confidential 20091 An ISA – FEEDBACK Document.
DM9900 Series · 2021. 5. 16. · (ISA 75.04 f to f)* BS Bare Stem F6 ANSI 600 (ISA 75.04 f to f)*...
Transcript of DM9900 Series · 2021. 5. 16. · (ISA 75.04 f to f)* BS Bare Stem F6 ANSI 600 (ISA 75.04 f to f)*...
APPLICATIONS & INDUSTRIES• Fibers• Chemical fluids with suspended solids• Dirty, clean, viscous and corrosive fluids• Gas• Steam• Pulp and paper• High temperature• Ideal product for processes with high flow
capabilities with low pressure drop
FEATURES & BENEFITS• Size range 1-1/2" - 30"• Flanged and flangeless versions available• Live loaded packing• Protected bearings, top & bottom• Easy installation and versatility• Extremely low actuator torque• Reduced trim option• WCB, 316SS, 317SS and other alloy materials• Soft seated and metal seated• Patents US 8,398; 055B2• Equal percentage• MTR Reports available• For live loaded packing• Single seat design• Single seat design• Fugitive emission bonnet
STANDARDS• ISO 5211 Direct Mount Design• ANSI Class 150, 300, 600 and 900• Standard ISA 75.04 face-to-face;
Option: ANSI B16.10 short pattern• CRN registered
J Flow Controls DM9900 SeriesSegmented V-Port Control Valve
J Flow Controls® • 4665 Interstate Drive • Cincinnati, OH 45246 • 513-731-2900 • www.jflowcontrols.com
®
Page 2
DM9900 Series Segmented V-Port Control Valve
DESCRIPTIONThe segmented V-port ball control valve provides excellent modulating control with obstruction-free design. The uni-body construction provides increased struc-tural integrity and minimized leaks through body joints.The specially designed compound V opening pro-vides precise equal percentage flow control with small incremental opening in the lower end of the valve rotation and high flow capacity in the upper end. The nearly wide open at full open, along with recessed bearings, virtually eliminates plugging/clogging of the valve
The valve can be direct mounted (no mounting bracket or coupling) to:• J-Flow's JFD spring & diaphragm actuators• J-Flow's JFC rack & pinion actuators, or• J-Flow-s JFE electric actuators
They can be controlled with a variety of J-Flow positioners:• Pneumatic• Electro-pneumatic• Digital smart
There are two actuator mounting options• The standard connection is direct mount a
compatible with any ISO 5211 standard actuator. • Optional splined connection for the installation of
diaphragm actuators with DSY-DSZ conversions
OPERATION
DESIGN & CONSTRUCTIONThe valve's design allows control of the most fluids used in many industries. The valve is suitable for fibers, particles in suspension, dirty, clean viscous and corrosive fluids, gas, steam and especially pulp and paper applications.
The valve can be supplied with a variety of actua-tors, positioners, limit switches/transmitters or other topworks accessories
Page 2 Page 3
DM9900 Series Segmented V-Port Control Valve
STANDARD SEATS
OPERATION
TFM, suitable to temperatures of 500°F for general services where ANSI Class VI shutoff is required to comply with ANSI / FCI 70-2 (see graph below)
METAL-TO-METAL CONTACT SEATSSuitable for erosive services, fiber, chemical fluids with suspended solids, and high temperature applications.
Metal seat with hardened stellite contact surface and 316 stainless steel segmented ball with tungsten carbide coating ANSI Class IV shutoff
Metal seat
Seat housing
Graphite gasket
Spring disc
Seat back seal
Soft seat
Seat housing
TFM gasket
Viton backup seal
PRESSURE TEMPERATURE CHARTSANSI 150 Soft Seat
ANSI 150 Metal Seat
600
500
400
300
200
100
0-70 -20 0 100 200 300 400 500 600 700
TFM4215 (+25% Carbon)TFM1600
TEMPERATURE °F
PRES
SUR
E (P
SI)
600
500
400
300
200
100
-20 0 100 200 300 400 500 600 7000
800 900 1000TEMPERATURE °F
PRES
SUR
E (P
SI)
Page 4
DM9900 Series Segmented V-Port Control Valve
Page 4 Page 5
DM9900 Series Segmented V-Port Control Valve
Page 6
DM9900 Series Segmented V-Port Control Valve
DM9900F SERIES - SIZE AND CLASS (1-1/2" - 12")Nominal Diameter DM9900
Series Flanged 9900 Series Wafer Cv
inches mm Class 150 Class 150 Class 300 Max1-1/2 40 80
2 50 1023 80 3404 100 6506 150 8458 200 1690
10 250 269012 300 4440
The segmented V-port ball valve can be used in modulating control services or "on-off" services
ACTUATOR SIZING TORQUEDM9900 Soft Seats DM9900 Soft Seats
in-lbs
10000
1000
100
100 100 200 300 400 500 600
Differential Pressure (PSI)0 100 200 300 400 500 600
Differential Pressure (PSI)
in-lbs
10000
1000
100
10
Torque is based on clean, clear liquid
Page 6 Page 7
DM9900 Series Segmented V-Port Control Valve
DIMENSIONS: 1-1/2" - 6" ANSI 150 FLANGED
L1
F
Part No. Name of Parts Materials1 Body A351 Gr. CF8M2 Ball Segment CF8M (Hardened - N)3 Bearing 17-4PH4 Gasket Graphite5 Trunnion Cap A351 Gr. CF8M6 Trunnion Cap Bolts SS 3047 Seat SS316 + Stellite
7A Seat Back Seal Graphite7B Seat Housing SS 3167C Spring Disk SS 3018 Insert Gasket Graphite9 Insert Cap A351 Gr. CF8M10 Key SS 31611 Stem SS 31612 Bearing Graphite13 Bonnet Gasket Graphite14 Bonnet A351 Gr. CF8M15 Bonnet Bolts SS 30416 Bearing Graphite17 Stem Packing Graphite18 Gland SS 30419 Belleville Washer SS 30120 Stem Nut SS 30421 Nut Stop SS 30422 Space Washer SS 304
65
Metal Seat Detail
G
Ød1Ød2
15H
7C
7B
7A7
413
210
11
ØD
1
121314161718 19 20 21 21
7
EB
7A
8
ØD
ØCØg
ØA
7C
97B
f h-nT
L
Soft SeatPart No. Name of Parts Materials
1 Body A351 Gr. CF8M2 Ball Segment A351 Gr. CF8M3 Bearing PTFE + 50% SS4 Gasket TFM 16005 Trunnion Cap A351 Gr. CF8M6 Trunnion Cap Bolts SS 3047 Seat TFM 1600
7A Seat Housing SS 3167B Back-up seal Viton (O-ring)8 Insert Gasket TFM 16009 Insert Cap A351 Gr. CF8M10 Key SS 31611 Stem SS 31612 Bearing TFM 421513 Bonnet Gasket TFM 160014 Bonnet A351 Gr. CF8M15 Bonnet Bolts SS 30416 Bearing TFM 421517 Stem Packing TFM 160018 Gland SS 30419 Belleville Washer SS 30120 Stem Nut SS 30421 Nut Stop SS 30422 Space Washer SS 304
DM9900 Series Segmented V-Port Control Valve
Page 8
DIMENSIONS: 1-1/2" - 6" ANSI 150 FLANGED
L1
F
65
G
Ød1Ød2
15H
7C
7B
7A7
413
210
11
ØD
1
121314161718 19 20 21 21
7
EB
7A
8
ØD
ØCØg
ØA
7C
97B
f h-nT
L
Metal Seat Detail
Valve Size A B E
LL1 H D1 F G d1 d2
ISA Class 150
1-1/2" 1.378 4.213 0.55 4.50 6.50 2.244 0.551 1.496 1.969 2.756 0.276 0.3622" 1.772 4.213 0.55 4.88 7.00 2.441 0.551 1.969 1.969 2.756 0.276 0.3623" 2.598 5.520 0.94 6.50 8.00 3.425 0.669 3.248 2.756 4.016 0.362 0.4494" 3.157 6.087 0.94 7.62 9.00 4.047 0.669 3.839 2.756 4.016 0.362 0.4496" 4.488 7.559 1.02 9.00 10.50 4.881 0.866 6.024 4.016 4.921 0.449 0.531
Valve Size
Flange Dimensions (Class 150)
DBolt Hole
t g fC h n
1-1/2" 5.0 3.88 0.625 4 0.56 2.88 0.062" 6.0 4.75 0.750 4 9.62 3.62 0.063" 7.5 6.0 0.750 4 0.75 5.00 0.064" 9.0 7.5 0.750 8 0.94 6.19 0.066" 11.0 9.5 0.875 8 1.00 8.50 0.06
Page 9Page 8
DM9900 Series Segmented V-Port Control Valve
DIMENSIONS: 8" - 12" ANSI 150 FLANGED (SOFT SEAT)
Metal Seat Detail
L1
F
65
G
Ød1Ød2
15H
413
2
10
11
ØA1
12131416171819
20
7
EB
7A
8
ØD
ØCØg
ØA
9
f M-NT
L
Ø
Part No. Name of Parts Material Options1 Body A351 Gr. CF8M A216 Gr. WCB2 Ball Segment A351 Gr. CF8M ---3 Bearing PTFE + 50% SS ---4 Gasket TFM 1600 ---5 Trunnion Cap A351 Gr. CF8M A216 Gr. WCB6 Trunnion Cap Bolts SS 304 ---7 Seat TFM 1600 ---
7A Seat Housing SS 316 A216 Gr. WCB8 Insert Gasket TFM 1600 ---9 Insert Cap A351 Gr. CF8M A216 Gr. WCB10 Key SS 316 ---11 Stem SS 316 ---12 Thrust Washer TFM 1600 ---13 Bearing TFM 4215 ---14 Bonnet A351 Gr. CF8M A216 Gr. WCB15 Bonnet Bolts SS 304 ---16 Gland A351 Gr. CF8M ---17 Stop SS 304 ---18 Stop Ring SS 304 ---19 Handle Head FCD45 ---20 Handle Tube Carbon Steel ---
Page 10
DM9900 Series Segmented V-Port Control Valve
DIMENSIONS: 8" - 12" ANSI 150 FLANGED (SOFT SEAT)
L1
F
65
G
Ød1Ød2
15H
413
2
10
11
ØA1
12131416171819
20
7
EB
7A
8
ØD
ØCØg
ØA
9
f M-NT
L
Ø
Valve Size A A1 B E L L1 H F d1
8" 5.98 8.07 9.45 2.28 9.56 5.51 1.102 4.92 M1210" 7.56 10.20 10.87 2.28 11.69 6.93 1.102 4.92 M1212" 8.66 11.81 //11.89 2.52 13.31 8.15 1.417 5.51 M16
Valve Size
Flange Dimensions (Class 150)
DBolt Hole
t g fC h n
8" 13.5 11.75 0.875 8 1.14 10.63 0.0610" 16.0 14.25 1.000 12 1.20 12.75 0.0612" 19.0 17.00 1.000 12 1.26 15.00 0.06
Page 10 Page 11
HOW TO ORDER
DM9900 Series Segmented V-Port Control Valve
Sizes Series Body1, Ball & Stem Port Body Seal Packing1-1/2 99 00 CF8 F Full G Graphoil G Graphoil2 0L CF3 R Reduced T TFM 1600 T TFM 16003 23 WCB, CF8M Ball & Stem C TFM 4215 C TFM 42154 33 CF8M6 44 Alloy 208 55 Monel10 6L CF3M12 77 Hastelloy C
88 LCB83 LCB, CF8M Ball & Stem99 DuplexAA A276 317
* Option ANSI B16.10 short pattern f to f
1 Please see the J Flow Controls Configurator for a full list of design options/materials
Seat End Connections OptionsM Metal F1 ANSI 150 LD Locking HandleT TFM 1600 (ISA 75.04 f to f)* GO Gear Operator
C TFM 4215 F3 ANSI 300 SE Stem Extension(ISA 75.04 f to f)* BS Bare Stem
F6 ANSI 600(ISA 75.04 f to f)*
F9 ANSI 900(ISA 75.04 f to f)*
4665 Interstate DriveCincinnati, OH 45246513-731-2900jflowcontrols.com
While the information and specifications contained in this literature are believed to be accurate, they are supplied for informative purposes only and should not be considered certified or a guarantee of satisfactory results. Nothing contained herein is to be construed as a warranty or guarantee, express or implied, regarding any matter with respect to this product. Because J Flow Controls® is continually improving and upgrading its product design, the specifications, dimensions and information contained herein are subject to change without notice.