DL Series Accessories

DLSeriesAccessories

Bulletin 7001-63E

Contents

Current Probes 2Differential Probes 3Passive Probes & FET Probe 4Logic Probes and Accessories 5Adapters, Front Panel Protectve Covers 6DL750, DL1600, DL7400 Series Accessories 7DL750 High-Voltage MeasurementAccessories, Cables 8Carrying Cases, Probe Cases 9Instrument Carts, Printer paper 10Software 11

2

Probe power

BNC inputBNC input

Probe power

Measured signal

Power supply

701933 DC to 50MHz, 30A

Yokogawa’s 700937, 701930, 701931 and 701932 current probes make it easy to observe current waveforms onan oscilloscope. Depending on your signal’s bandwidth and maximum current, you can choose the right currentprobe for your measurement.

Bandwidth: DC to 50MHz(-3dB)Maximum peak current value: 30ArmsAmplitude accuracy

(0 to 30Arms): ±1.0% of rdg ±1mV(to 50Apeak): ±2.0% of rdg (DC,45 to 66Hz)

Weight: Approx. 230 g

701932 DC to 100MHz, 30A

Bandwidth: DC to 100 MHz(-3dB)Maximum continuous input range: 30ArmsAmplitude accuracy

(0 to 30Arms): ±1.0% of rdg ±1mV(to 50Apeak): ±2.0% of rdg (DC,45 to 66Hz)

Weight: Approx. 240 g

See the bulletin 7019-30E for detailed specifications. When using the DL to power the current probes, make sure that the total current consumption of the probes does not exceed the DL’s probe power rating. See the following web site for

details.http://www.yokogawa.com/tm/probe/

701930 DC to 10MHz, 150A


(0~150Arms): ±1.0% of rdg±1mV(~300Apeak): ±2.0% of rdg (DC,45 to 66Hz)

Weight: Approx. 500g

701931 DC to 2MHz, 500A


(0 to 500Arms): ±1.0% of rdg±5mV( to 700Apeak): ±2.0% of rdg (DC,45 to 66Hz)

Weight: Approx. 520g

• Bandwidth: DC to 2/10/50/100 MHz• Max Current: Max 30/150/500 A• Clamp Configuration Makes Current Measurements Easy• No External Amplifier Required: Connects Directly to DL Series

Instruments• Powered by the DL’s Probe Power Supply Connectors• Current Values Can Be Read Directly on DL Series Instruments• Includes Demagnetizing Switch and Zero Adjust Dial Functions

701934 Probe Power Supply

Number of power supply connectors: 4Output voltage: ±12 V±0.5 VRated output current: +12 V: 2.5 A, -12 V: 2.5 A (the total value of four outputs)Rated supply voltage: AC100 to 240 V (50/60 Hz)External dimensions: Approx. 80 (W) * 119 (H) * 200 (D) mmWeight: Approx. 1.1 kg

A power supply for current probes,FET probes, and differential probes.Supplies power for up to fourprobes, including large currentprobes.

Current Probes For High Current and Wide Bandwidth Measurements

Coming Soon

3

700924

701921

700925

701922

701920

DC to 100MHz(-3dB)

DC to 100MHz(-3dB)

DC to 15MHz(-3dB)

DC to 200MHz(-3dB)

DC to 500MHz(-3dB)

1/100,1/1000

1/10,1/100

1/10,1/100

1/10 (fixed)

1/10 (fixed)

±1400V(DC+ACpeak)

±700V(DC+ACpeak)

±500V(DC+ACpeak)

±20V(DC+ACpeak)

±12V(DC+ACpeak)

±1400V(DC+ACpeak)

±1000V(DC+ACpeak)

±1000V(DC+ACpeak)

±60V(DC+ACpeak)

±40V(DC+ACpeak)

For High voltage measurement•High voltage(+/-1400V) can be measured safely•Useful for evaluating high-frequency inverter circuits (e.g., IGBT)•High common mode input voltage

For high speed signal measurement•For high speed differential measurement such as LVDS•For measuring signals floating from ground in a high-speed digital circuit•Input capacity : 2.5pF

For High and medium voltage measuremet•Useful for high and medium voltage differential measurements•1/10, 1/100 (switchable)

For medium speed signal measurement•Foe CAN bus signak measurement•Sensor signal measurement for automobile development

For medium voltage measuremetAA batteries or B9852MJ Power cable**: sold separately

AA batteries or B9852MJ Power cable**: standard accessory

AA batteries or B9852MJ Power cable**: sold separately

Power supply cable

Power supply cable

ModelFrequency bandwidth

Attenuation Ratio

Maximum alloweddifferential voltage

Maximum input voltage Power supplies Application

700924 Max. ±1400V/ 100MHz

Yokogawa’s differential probes let you make wide-bandwidth differential measurements. Just connect the outputof the probe to the input of a single-ended digital oscilloscope. We provide you a variety of differential probes,which can be utilized for measuring the gate-to-source voltage of a switching power supply, read/write signals ofa hard disk drive, high-speed logic signals, CAN bus signals, and more.

Bandwidth: DC to 100MHz(-3dB)Input attenuation ratio:

Switch between 1/100 and 1/1000Maximum allowed differential voltage:

: ±1400V(DC+ACpeak) or 1000Vrms(1/1000)Maximum common mode input voltage

: ±1400V(DC+ACpeak) or 1000Vrms(1/100, 1/1000)

Differential Probes For High-Voltage and High-Bandwidth Measurements

701921 Max. ±700V/ 100MHz

Bandwidth: DC to 100MHz(-3dB)Input attenuation ratio: Switch between 1/10 and 1/100Maximum allowed differential voltage: ±700V(DC+ACpeak, 1/100)Maximum common mode input voltage: ±700V(DC+ACpeak) (1/10, 1/100)

700925 Max. ±500V/ 15MHz

Bandwidth: DC to 15MHz(-3dB)Input attenuation ratio: Switch between 1/10, 1/100Maximum allowed differential voltage

: ±500V(DC+ACpeak) or 350Vrms (1/100)Maximum common mode input voltage

: ±500V(DC+ACpeak) or 350Vrms(1/10, 1/100 )

701922 Max. ±20V/ 200MHz

Bandwidth: DC to 200MHz(-3dB)Input attenuation ratio: 1/10(fixed)Maximum allowed differential voltage: ±20V(DC+ACpeak)Maximum common mode input voltage: ±60V(DC+ACpeak)50 Ω output

701920 Max. ±12V/ 500MHz

Bandwidth: DC to 500MHz(-3dB)Input attenuation ratio: 1/10(fixed)Input impedance: 100KΩ /2.5pFMaximum allowed differential voltage: ±12V(DC+ACpeak)Maximum common mode input voltage: ±30V(DC+ACpeak)50 Ω output

B9852MJPower cable

The B9852MJ cable supplies power to the700924, 700925 and 701921 differentialprobes* from the DL probe power con-nectors. (The probe power option is re-quired on the DL unit.)

70097650 Ω terminator

Used to connect an oscilloscope hav-ing a 1M-ohm input to a probe with a50-ohm output. It is required when us-ing the 701920 and 701922 probes withthe DL1600 series.

* Cable only works with newer 700924, 700925 and 701921 probes that indicate "6VDC or9VDC"at the probe input power connector.

Differential Probe Selection Guide

The max. current consumption of all the above differential probes is ±125mA. Make sure that the total current consumption of the probes does not exceed the DL’s probe power rating. See the following web site for details. http://www.yokogawa.com/tm/probe/

4

Combination

700960

700988

701940

700929

700978

701941

700939

DC to 200MHz(- 3dB, 1/10)

DC to 400MHz(- 3dB, 1/10)

DC to 10MHz(- 3dB, 1/10)

DC to 100MHz(- 3dB)

DC to 100MHz(- 3dB)

DC to 500MHz(- 3dB)

DC to 900MHz(- 3dB)

1/1 or 1/10

1/1 or 1/10

1/1 or 1/10

1/10 (fixed)

1/100 (fixed)

1/10 (fixed)

1/10 (fixed)

600V(DC+ACpeak)

600V(DC+ACpeak)

600V(DC+ACpeak, nonisolated input )

1000V(DC+ACpeak, probe itself)

4000V(DC+ACpeak)

400Vrms

10V(DC+ACpeak)

10MΩ/14pF(1/10)

10MΩ/14pF(1/10)

10MΩ/22pF(1/10)

10MΩ/18pF

50MΩ/4pF

10MΩ/10pF

Approx. 2.5MΩ/Approx. 1.8pF

14- 30pF

15- 25pF

17- 46pF

20- 45pF

10- 30pF

10- 25pF

—

1.5m

1.5m

1.5m

1.5m

1.2m

1.2m

1.5m

Model Frequency Bandwidth Attenuation Ratio Maximum Input Voltage Input Resistance/Capacitance(*2) Compensation Range(*2) Cable Length

Yokogawa offers a variety of passive probes including: probes designed for probing small areas (PCBs, ICs, etc.),and for measuring high voltage levels. Yokogawa also offers a FET probe which has minimal input capacitance formaking accurate, measurements on fast signals.

For the DL1600 series1.5m long

Passive Probes & FET Probe

700960200MHz Passive Probe

For the DL1700E,7400 series1.5m longStandard accessories include:Ground lead, Pinchers tip, IC test tip, Groundattachment, Marker tip

700988400MHz Passive Probe

For the DL750 701255 module1.5m longStandard accessories include:Ground lead, Pinchers tip, IC test tip, Groundattachment, Marker tip

70194010:1 Passive Probe for DL750

For the DL750 isolation modules1.5m long

70092910:1 probe (Safety probe - for use withisolated input modules)

*1: The B9852HF contains the following eleven(11) kinds of accessories.(Insulation cap, IC cap, BNC adapter, Rigid tip, Spring tip (Ø: 0.80 mm), Spring tip (Ø: 0.38 mm), Ground spring, Adjustment tool, Pincher tip, Standard ground lead, Color coding rings)

*2: Input Capacitance: Capacitance at the tip of the probe Compensation Range: Compensation Range for the input capacitance of the oscilloscopeSee the following web site for details of these passive probes. http://www.yokogawa.com/tm/probe/

Attenuation ratio: 1/100(Fixed)1.2m longStandard accessories include:Probe cap, Pinchers tip, AdjustmentDriver, Ground lead

700978High voltage probe

For DL1700E,7400 series1.2m longStandard accessories: Basic Accessories setB9852HF-see below.

701941Miniature passive probe

Bandwidth: DC to 900MHz1.5m long50 Ω output

700939FET probe

A clip set designed for the 700988,700960 and 701940 probes.

B9852CRMini clip converter

B9852HFBasic accessories set for the 701941 probe

11 accessories have been included in this set(See below *1).

Passive Probe Selection Guide

5

Combination Combination

701980

701981

700986

700987

8

8

8

8

±10V

±10V

±42V (DC +AC peak)

DC input: H/L detection for 10V DC to 250 V DCAC input: H/L detection(50/60 Hz) for 80 V AC to 250V AC

1M/10pF

10k/9pF

Approx. 100k

Approx. 100k

+/-40V (DC +AC peak)



250Vrms(CAT1, CAT2)

±10 V at 0.1 V resolution

±10 V at 0.1 V resolution

1.4V

DC input 6 V DC 50%

AC input 50 V AC 50%

85.7mm * 64.2mm * 20mm

85.7mm * 64.2mm * 20mm

150mm * 60mm * 20mm

195mm * 117.3mm * 45mm

Model Inputs Nondestructive Input Voltage Range Input Impedance Input Voltage Range Threshold Level External Dimensions

See the following web site for details.http://www.yokogawa.com/tm/probe/

:mm

The DL7400 series lets you measure analog (4CH or 8CH) and logic(16-bit) signals simultaneously in one unit.The DL750 lets you capture up to 16 analog channels and 16-bit logic signals simultaneously.The following logicprobes are used with these instruments.

Maximum toggle frequency: 100MHzInput impedance (typical value): 1M/10 pF

Logic Probes and Accessories

701980Logic Probe for DL7400

Maximum toggle frequency: 250MHzInput impedance (typical value): 10k/9pF

701981Logic Probe for DL7400

Two Measurement leads(B9879PX and B9879KX)included.

700986Logic probe for the DL750 - non-isolated inputs

Use with measurement lead 758917 and 758922,758929 or 701954 adapter leads (below).701954 is shown on page 8.

700987Logic Probe for the DL750 - isolated inputs

Attached to the tips of logic probe (701980 or 701981)or mini-clips ( B9852CR ), the IC clips can be used toclip contiguous 0.5-mm pitch terminals. A total of 10clips are included.

B9852ESIC Clip

A set of 0.8m long red and black test leads, used incombination with a pair of optional 758922 or 758929alligator-clip adapters.

758917Measurement lead set

Rated at 300 V. Attaches to the 758917 test leads.Sold in pairs.

758922Small Alligator-clip Adapter

Rated at 300 V. Attaches to the 758917 test leads.Sold in pairs.

758929Large Alligator-clip Adapter

Logic Probe Selection Guide

6

BNC-Banana-jack (female) adapter.Use for circuits having voltage levels nogreater than 42 V.

Adapters

366921Conversion Adapter

Banana-plug (male)-BNC adapter.Use for circuits having voltage levels nogreater than 42 V.


T-adapter for BNC connectors.Use for circuits having voltage levels nogreater than 42 V.

366923T-Adapter

Safety-terminal-binding-post adapter.Use for circuits having voltage levels nogreater than 42 V.


Used to connect an oscilloscope hav-ing a 1M-ohm input to a probe with a50-ohm output.

70097650 Ω terminator

A BNC (jack)-RCA (plug) adapter.Use for circuits having voltage levels nogreater than 42 V.


An adapter for fitting a 4mm widebanana plug to a BNC connector (male).

758924BNC Adapter

A transparent cover to protect the front panel.

Front Panel Protective Covers

B9989FAFor DL1700E/1600 Series


B8023EAFor DL750


B8051DPFor DL7400 Series

7

NDIS cable(5m) includedBridge resistance: 120 Ω (701955)

350 Ω (701956)

DL750 Accessories

701955·701956NDIS Bridge Heads

D-sub cable(5m) includedSupports Shunt-CalBridge resistance: 120 Ω (701957)

350 Ω (701958)

701957·701958D-sub Bridge Heads

A 1.5m long connector-to-connectoradapter cable complying with NDIS-MILC26482. Used to connect a MIL-stan-dard cable to the strain module

700940NDIS Connector Cable

An NDIS connector for direct connec-tion to astrain module.

A1002JCNDIS Connector

For recording and playing voice memos

701951Earphone microphone

For playing voice memos

701952Speaker cable

For the DC power supply model (/DC).Cigarette lighter plug type1.8m long

701970DC power cord

For the DC power supply model (/DC).Alligator clip type1.8m long

701971DC power cord

Powers instrument for approx. 2 hoursCharging time: approx. 4.5 hoursMax. Power consumption: 200VA

DL1600 Series Accessories

701680Battery Box (only works with - DC model)

For connection between DL1640 Series and 701680.Comes standard with the 701680 battery box.

B8050WPBattery box connection cable

For the DC power supply model (-DC).

A1105JCDC power supply connector

See the following web site for detailed dimensions.http://www.yokogawa.com/tm/img/Bu/701965/tm-701965_01.gif


701965Rack mount kit(for EIA rack)

For use with the Power Supply Analysis option (/G4)Output voltage: Approx. 0 to 5 VOutput current: Approx. -100 to 0 mA

701935Deskew signal source

8

Large-sized Small-sized Combination For screw terminal

These accessories enable safe high-voltage measurements when used together with DL750 isolatedinput modules. [Note: read the User’s Manual carefully before making high-voltage measurements]

Use with DL750 isolation modulesFor High-voltage measurements1.5m long

DL750 High-Voltage Measurement Accessories

700929Isolation Probe

1000Vrms-CAT2,1.8m longSafety BNC(male) to safety banana(female) use incombination with 701959, 701954, 758921, 758922or 758929

7019011:1 BNC safety adapter lead

701902:1000Vrms-CAT2(BNC-BNC), 1m701903:1000Vrms-CAT2(BNC-BNC), 2m

701902·701903Safety BNC cable

Set contains one black and one red clip.1000Vrms-CAT2It can be connected with 701901.

701959Safety Mini clip(Hook Type)

Set contains one black and one red clip.1000Vrms-CAT2

701954Alligator clip(Dolphin type)

Adapters for fitting a 4mm banana plug to a fork termi-nal. Set contains one black and one red clip.1000Vrms-CAT2

758921Fork terminal adapter

Cables

A 1m long (366924) and 2m long(366925) BNC-BNC cables.Use only for circuits having voltage lev-els no greater than 42 V.

366924·366925BNC cable

A 1m long BNC-alligator clip cable.Use only for circuits having voltagelevels no greater than 42 V.

366926BNC cable

Do not use this cable for purposes otherthan DL750/1600/1700/7400GO/NO-GO judgement.Used to connect an external device.

366973Go/No-Go Cable

A subassembly of 1.2m long test leadswith alligator-clip adapters.Use only for circuits having voltage lev-els no greater than 42 V.

366961Measurement lead

Color Pin No. Signal Name LogicYellow 2 START IN NegativeWhite 3 GO OUT NegativeGreen 4 NOGO OUT NegativeBlue 5 GND

9

Three pockets are provided for storing accessories and the user’s manual.Can store the DC power supply model and the Battery box

Carrying Cases, Probe Cases

701964Soft Carrying Case for DL1600/DL1700E series

Soft type carrying case.

700914Soft Carrying Case for DL1700E series.

Hard type carrying case.

701950Hard Carrying Case for DL1600/DL1700E series

Three pockets are provided for storing accessories and the user’s manual.

701963Soft Carrying Case for DL750

For storing accessories (probes, etc).It can be attached on the side of the DL1600 and 1700E series.

B9918EZSoft probe case for DL1600,1700E series.

For storing accessories (probes, etc).It can be attached to the DL750’s front panel protective cover.

B9946EBSoft Case for the DL750

For storing accessories (probes, etc).

B9969ETSoft case for the DL7400 series.

10

We offer compact, deluxe and all-purpose instrument cars to meet your needs.

Compact Instrument Cart500 mm (W) 560 mm (D) 705 mm (H)/A option: keyboard, mouse table/B option: comes with a 3-prong power strip

SpecificationsUpper shelf angle:Horizontal or approximately 18Outer (maximum) dimensions:500 mm (W) 560 mm (D) 705 mm (H)Upper shelf dimensions:450 mm (W) 450 mm (D) 25 mm (H)Middle/lower shelf dimensions:450 mm (W) 450 mm (D) 25 mm (H)Space between middle and upper shelves: 300 mmSpace between middle and lower shelves: 240 mm(without accessory tray)Maximum load (per shelf): 20 kgCart weight: 21 kg

Instrument Carts

701960

Deluxe Instrument Cart570 mm (W) 580 mm (D) 839 mm (H)/A option: keyboard, mouse table/B option: comes with a 3-prong power strip

SpecificationsShelf position:Adjustable to any position using screw holesOuter (maximum) dimensions:570mm (W) 580 mm (D) 839mm (H)Upper shelf dimensions: 450mm (W) 450mm (D) 35mm (H)Lower shelf dimensions:450mm (W) 450mm (D) 35mm (H)Space between upper and lower shelves:Depends on position of shelvesMaximum load (per shelf): 50 kgCart weight: 25 kg

701961

All-Purpose Instrument Cart467 mm (W) 693 mm (D) 713 mm (H)

SpecificationsOuter (maximum) dimensions:467 mm (W) 693 mm (D) 713 mm (H)Upper/lower shelf dimensions:457 mm (W) 683 mm (D)Drawer:610 mm (W) 380 mm (D)Slide-out table:380 mm (W) 440 mm (D)Casters:100 mm diameter wheels (front casters with stoppers)Maximum load (per shelf): 50 kgCart weight: 23.5 kg

701962

Printer Paper

For the DL1600, DL1700E, DL7400 seriesPaper width: 112mmPaper length: 30mOrder Q’ty: 5 (1set)

B9850NXDL Printer Paper (Except for DL750)

For the DL750Paper width: 112mmPaper length: 10mOrder Q’ty: 10 (1set)

B9988AEPrinter paper for the DL750

Cable holder

BracePowerStrip (/B option)

Handle Mouse standattachmentscrew

Keyboard tray

Mousestand

11

Current Probe

Current Probe

Current Probe

Current Probe

Power supply

701933

701930

701931

701932

701934

1

1

1

1

1

DC to 50MHz

DC to 10 MHz

DC to 2 MHz

DC to 100 MHz

Number of connectors : 4

Product Model Name Description Order

Q’ty Product Model Name Description Order

Q’ty


Q’ty


Q’ty


Q’ty

Current Probes Logic Probes

Differential Probes

Adapters

Passive Probes, FET Probe

Differential Probe

Differential Probe

Differential Probe

Differential Probe

Differential Probe

Power cable

700924

700925

701920

701921

701922

B9852MJ

1

1

1

1

1

1

Passive Probe

Passive Probe

Passive Probe

10:1 probe

High voltage probe

Miniature passive probe

FET probe

Basic accessories set for the 701941 probe

Mini clip converter

700960

700988

701940

700929

700978

701941

700939

B9852HF

B9852CR

1

1

1

1

1

1

1

1

1

200MHz bandwidth, 600V



100MHz bandwidth isolation probe


500MHz bandwidth, 400Vrms


11 accessories have been included

for 700988/700960/701940 probes

Logic Probe

Logic Probe

Logic Probe

Logic Probe

IC Clip

Measurement lead set

Small Alligator-clip Adapter

Large Alligator-clip Adapter

701980

701981

700986

700987

B9852ES

758917

758922

758929

1

1

1

1

1

1

1

1

Maximum toggle frequency : 100MHz

Maximum toggle frequency : 250MHz

For DL750 non-isolated input

For DL750 isolated inputs

For contiguous 0.5-mm pitch terminals

For 700987 Isolated logic probe

300Vrms-CAT2

1000Vrms CAT2

Conversion Adapter

Conversion Adapter

T-Adapter

Conversion Adapter

50 Ω terminator

Conversion Adapter

BNC Adapter

366921

366922

366923

751512

700976

366928

758924

1

1

1

1

1

1

1

BNC-Banana-jack (female) adapter

Banana-plug (male)-BNC adapter

T-adapter for BNC connectors

Safety terminal-binding post adapter

Feed-through type

A BNC (jack)-RCA (plug) adapter

BNC-banana jack(female) adapter

Max. ±1400V/ 100MHz

Max. ±500V/ 15MHz

Max. ±12V/ 500MHz

Max. ±700V/ 100MHz

Max. ±20V/ 200MHz

Supplies power to the DL unit

Front Panel Protective Cover



B9989FA

B8023EA

B8051DP

1

1

1

A transparent cover for the DL1700E/1600

A transparent cover for the DL750

A transparent cover for the DL7400

Front Panel Protective Covers


Q’ty

Software

Waveform Viewer lets you view waveforms on yourPC, just as you view them on the DL Seriesinstrument.

700919Waveform Viewer for DL series

Wirepuller displays an image of the front panel DLSeries on your PC for monitoring waveform signals.You control the DL Series by simply using your PC’smouse and keyboard to perform actions on thedisplayed front panel.

Wirepuller (free)

The MATLAB tool kit for DL series is a plug-in forMATALAB software. The toolkit can be used to controlsupported DL series instruments using MATLAB or toacquire data from the DL series for use in MATLAB viaa communication interface (GP-IB, USB, Ethernet).

701991MATLAB tool kit

Visit the following web sites for details about this software:1. 700919 Waveform Viewer for DL series

http://www.yokogawa.com/tm/700919/

2. Wirepullerhttp://www.yokogawa.com/tm/wirepuller/

3. MATLAB tool kithttp://www.yokogawa.com/tm/701991/

Model Numbers and Suffix Codes

Soft Carrying Case

Soft Carrying Case

Hard Carrying Case

Soft Carrying Case

Soft Case

Soft Case

Soft Case

701964

700914

701950

701963

B9918EZ

B9946EB

B9969ET

1

1

1

1

1

1

1

For the DL1600/DL1700E series

For the DL1700E series

For the DL1600/DL1700E series

For the DL750

For the DL1600,1700E series

For the DL750

For the DL7400 series

Battery Box

Battery box connection cable

DC power supply connector

701680

B8050WP

A1105JC

1

1

1

For DL1600 series

For connection between DL1640 Series and 701680

For the DL1640 Series DC power supply model (-DC).

Bridge Head

Bridge Head

Bridge Head

Bridge Head

NDIS Connector Cable

NDIS Connector

Earphone microphone

Speaker cable

DC power cord

DC power cord

701955

701956

701957

701958

700940

A1002JC

701951

701952

701970

701971

1

1

1

1

1

1

1

1

1

1

NDIS cable(5m) included, 120

NDIS cable(5m) included, 350

D-sub cable(5m) included, 120

D-sub cable(5m) included, 350

NDIS-MIL conversion, 1.5m long

For the Strain module

For recording and playing voice memos

For playing voice memos

Cigarette lighter plug type

Alligator clip type

Instrument Cart

Instrument Cart

Instrument Cart

701960

/A

/B

701961

/A

/B

701962

1

1

1

Compact Instrument Cart

keyboard, mouse table

3-prong power strip

Deluxe Instrument Cart

keyboard, mouse table

3-prong power strip

All-Purpose Instrument Cart

Waveform Viewer for DL series

Wirepuller

MATLAB tool kit

700919

-

701991

1

-

1

For the DL1600, DL1700E, DL7400 series

Free Software

plug in software for the MATLAB

Printer paper

Printer paper

B9850NX

B9988AE

5(1set)

10(1set)

For the DL1600, DL1700E, DL7400

For the DL750

Rack mount kit

Deskew signal source

701965

701935

1

1

for EIA rack

For Power Supply Analysis option

Isolation Probe

1:1 BNC safety adapter lead

Safety Mini clip(Hook Type)

Alligator clip(Dolphin type)

Fork terminal adapter

Safety BNC cable

Safety BNC cable

700929

701901

701959

701954

758921

701902

701903

1

1

1

1

1

1

1

For DL750 isolation module

1000Vrms-CAT2, A1.8m long

A set of brack and red clip, 1000Vrms-CAT2



1000Vrms, 1m long

1000Vrms, 2m long

BNC cable

BNC cable

BNC cable

GO/NO-GO Cable

Measurement lead

366924

366925

366926

366973

366961

1

1

1

1

1

1m long

2m long

A 1m long BNC-alligator clip cable

For DL750/1600/1700/7400 GO/NO-GOjudgement.

A subassembly of 1.2m long test leads with alligator-clip adapters

Carrying Cases, Probe Cases


DL750 Accessories

Instrument Carts

Software

Printer PaperDL7400 Series Accessories

DL750 High-Voltage Measurement Accessories

Cables


Q’ty


Q’ty


Q’ty


Q’ty


Q’ty


Q’ty


Q’ty


Q’ty


Q’ty

* Microsoft, Windows are trademarks or registered trademarks of Microsoft Corporation in the US and other countries.

* MATLAB is a registered trademark of the Math Works, Inc in the US.

ML-14E

Represented by :

YOKOGAWA CORPORATION OF AMERICA20420 Century Blvd. Germantown, Maryland 20874, U.S.A.Phone: (1)-301-916-0409, Fax: (1)-301-916-1498

YOKOGAWA EUROPE B.V.Databankweg 20, 3821 AL, Amersfoort, THE NETHERLANDSPhone: (31)-33-4641858, Fax: (31)-33-4641859

YOKOGAWA ENGINEERING ASIA PTE. LTD.5 Bedok South Road, Singapore 469270Phone: (65)-62419933, Fax: (65)-62412606

YOKOGAWA MEASURING INSTRUMENTS KOREA CORP.Phone: (82)-2-551-0660, Fax: (82)-2-551-0665

YOKOGAWA SHANGHAI TRADING CO., LTD.Phone: (86)-21-6880-8107, Fax: (86)-21-6880-4987

Subject to change without notice. [Ed : 04/b] Printed in Japan, 409(KP)All Rights Reserved, Copyright© 2004, Yokogawa Electric Corporation.

YOKOGAWA ELECTRIC CORPORATIONCommunication & Measurement Business Headquarters2-9-32 Nakacho, Musashino-shi, Tokyo, 180-8750 JapanPhone: (81)-422-52-6768, Fax: (81)-422-52-6624

E-mail: [email protected]

DL Series Accessories

Documents

Transcript of DL Series Accessories