DJ Player ProUser Manual
-
Upload
bear-black -
Category
Documents
-
view
218 -
download
0
Transcript of DJ Player ProUser Manual
-
8/16/2019 DJ Player ProUser Manual
1/38
http://djplayerpro.com/database.html
2016-04-02 11:11 PM
DJ Player Pro Manual
-
8/16/2019 DJ Player ProUser Manual
2/38
-
8/16/2019 DJ Player ProUser Manual
3/38
How to import a database
1. Force close the DJ Player application on your iOS device:
i. Press the Home button two times quickly to see small previews of your recently used apps.
ii. Swipe left to find DJ Player.
iii. Swipe up on DJ Player's preview to close it.
2. Rename the database file to: import.db
3. Drag import.db to DJ Player's folder in iTunes File Sharing.
4. Launch DJ Player.
5. import.db will disappear if the import was successful.
6. Check the DJ Cloud settings page for the current status. Sync happens once in every minute.
! Table of contents.
20,274 people like this. Sign Up to see what
your friends like.LikeLike
-
8/16/2019 DJ Player ProUser Manual
4/38
http://djplayerpro.com/dvs.html
2016-04-02 11:11 PM
DJ Player Pro Manual
-
8/16/2019 DJ Player ProUser Manual
5/38
DVS (Timecode, Turntable Control)DJ Player Pro User's Manual
DVS features
DJ Player Pro supports most timecode formats, in relative mode. Many users are reporting great results with
Serato or Traktor timecode vinyl.
There is no absolute mode (aka "needle-drop") due patent issues. But you have a touchscreen iOS device with
cue points, plus there is MIDI too.
One or two inputs (turntables or CD players) are supported.
How to set up DVS with DJ Player Pro
1. Signal levels are important for a good quality control signal. Always enable phono for classic turntable outputs
for example. On the Traktor Audio 6, set the permanent settings on your computer.
2. Load a track into Player A.
3. Connect your DVS setup (turntables, sound card) to your iOS device (check "Connecting external devices,
USB" on how).
4. Hold SHIFT and tap on the gear icon to go into settings.5. Tap on DVS.
6. Set your timecode frequency. Serato is 1000 Hz, Traktor is 2400 Hz for example.
7. If you are using Traktor timecode, enable "Alternative Phase".
-
8/16/2019 DJ Player ProUser Manual
6/38
Next!
8. Tap on "Enable DVS Input" to enable audio input (DVS timecode is nothing but a simple audio signal).
Configure USB channels if needed.
9. Assign Input 1 to Player A.
10. Try simple movements. If playback is in reverse, swap your turntable cables.
11. Check the signal strength indicator and adjust if you can.
12. If playback is still not stable, try "Alternative Phase".
Advanced DVS features
Live player assignment
The player assignment controls are MIDI mappable and instantly switchable. One timecode can control any number
of players simultaneously. Get creative with this great flexibility.
DVS FX
Along with the player, control the main parameter of any enabled effect slot with your timecode. Forward is the wet,
reverse is the dry direction.
THRU
Playing regular vinyl is no problem. Just tap on THRU. The effect chain and mixer controls are still useable in this
mode.
" Table of contents.
20,274 people like this. Sign Up to see what
your friends like.LikeLike
-
8/16/2019 DJ Player ProUser Manual
7/38
http://djplayerpro.com/midiusb.html
2016-04-02 11:10 PM
DJ Player Pro Manual
-
8/16/2019 DJ Player ProUser Manual
8/38
MIDI, External Devices, USB audioDJ Player Pro User's Manual
Connecting external devices, USB
iOS is compatible with many external devices, MIDI controllers and sound cards.
Devices with iOS compatible connectors
Some devices have iOS compatible Lightning or (older) 30-pin connectors, such as the Numark iDJ Pro. You can
directly connect these to your iOS device, and they can charge and power it as well.
Some products support the older, 30-pin connector only. Don't worry, Apple has the "Lightning to 30-pin Adapter" to
cover this. It works great.
USB devices
You can connect USB devices using the "Lightning to USB Camera Adapter" (or the "Camera Connection Kit" for
older iOS devices with 30-pin connectors). Always use the original from Apple, third-party adapters have
instability problems.
Don't get confused by the name "camera adapter". iOS devices can not host USB devices, and this adapter is aUSB host peripheral. Don't worry, this is NOT a hack. USB audio and MIDI through this adapter is an official iOS
feature.
-
8/16/2019 DJ Player ProUser Manual
9/38
A USB device must be USB Class Compliant to be compatible with iOS. Not every USB device is designed
according to this standard (unfortunately). A good indicator for class compliance if the USB device doesn't require
a driver to work with Mac OSX.
Powered USB hubs
If iOS displays "The connected USB device requires too much power" or you would like to connect multiple USB
devices, use a powered USB hub. Even if your USB device has it's own power adapter, iOS may still complainabout power usage.
Prefer powered USB hubs with 1A or stronger power adapters and USB 3.0 compatiblity (it ensures a modern chip).
1. Connect the camera adapter to your iOS device.
2. Connect the USB hub's "PC port" or "PC cable" (the one you would connect to a computer normally) to the
camera adapter.
3. Connect your USB MIDI or audio device with its own USB cambe to the USB hub.
iOS device! camera adapter! USB hub! USB devices
External Audio Devices
iOS can handle just one external audio device at a time, with the "last plugged in" policy. The device you last
plugged in will have the audio.
Use an audio device with 2 or more stereo outputs for separate pre-listening and master signals. Audio devices with
1 stereo output can not be used for this purpose due an iOS bug.
You can also use a DJ splitter cable. DJ Player was the very first software to support those (together with
Stereomusik, we invented it).
Controllers by Native Instruments
-
8/16/2019 DJ Player ProUser Manual
10/38
Controllers by Native Instruments are not MIDI, they use a custom closed protocol. It's only the driver you install on
your computer creating a virtual MIDI device. As you can not install drivers on iOS, Traktor DJ is the only software
able to communicate with their controllers.
Native Instruments sound cards work GREAT with DJ Player. For example, the Traktor Audio 2 is small, powerful and
can also charge your iOS device.
MIDI
DJ Player Pro offers a complete set of MIDI functionality. Hold SHIFT and tap on the gear icon to go into SETTINGS,
then choose MIDI on the top.
What is a DJ MIDI controller, really?
A big dumb box with controls sending nothing but control messages to the DJ software on your iOS device (or
computer). When you push a button, turn a knob or move a fader, the MIDI controller sends a short message in
MIDI format over the USB.
Nothing more happens, really. Everything else happens in the DJ software. It's interesting to see that DJs pay $$$
for dumb boxes (the controllers), but doesn't really like to pay for the DJ software, which does almost everything.
But that's a different story.
The DJ software can also send MIDI messages to the MIDI controller, to light up some LEDs. If the MIDI controller
hosts an audio device (sound card), it's a distinct device in the same box -- has nothing to do with MIDI.
What is a MIDI mapping?
MIDI mappings are data tables, connecting the MIDI messages to features in the DJ software. The DJ software
doesn't know what to do when it receives a MIDI message, if there is no mapping. A MIDI device "comes alive"
when the DJ software has a mapping for it.
DJ Player comes with factory mappings for many DJ MIDI controllers. Just plug them in, and DJ Player will
recognize and use the factory mapping immediately.
You can also customize the factory mappings, or create your own MIDI mappings from scratch for any MIDI device.
There is no "midi mapping standard". Every DJ software has it's own mapping format. DJ Player's MIDI mappings
have the .djpmap extension. DJ TechTools has a great mapping community where you can search for mappings.
MIDI options
MIDI soft takeover: if a control is moved on screen and it no longer matches the hardware control, the control
will not update until the hardware control matches the onscreen value.
Jog rotation is 4 beats: novel feature for scratch DJs. Read more at DJWORX.
Receive MIDI from apps: apps on the iOS device can also send MIDI messages to DJ Player, so you can build
custom user interfaces with MIDI control apps for example. Use this MIDI Table for mapping.DJ Player Pro can send MIDI Clock signal to send synchronisation messages for other software or external
devices, such as synthesizers.
-
8/16/2019 DJ Player ProUser Manual
11/38
Next!
How to map a feature to a MIDI control?
1. Create or customize a mapping.
2. Tap on the mapping's name to open the MIDI Editor.
3. Find the feature you would like to map, and tap on it.
4. A feature may have multiple input options and an output (for LED) too. You need to map one input at least. Tap
on LEARN and follow the on-screen instructions.
Alternatively, tapping on the input or output option you can manually edit the MIDI properties (channel, command,
number, type, etc.).
" Table of contents.
20,274 people like this. Sign Up to see what
your friends like.LikeLike
-
8/16/2019 DJ Player ProUser Manual
12/38
http://djplayerpro.com/midiusb.html
2016-04-02 11:04 PM
DJ Player Pro Manual
-
8/16/2019 DJ Player ProUser Manual
13/38
MIDI, External Devices, USB audioDJ Player Pro User's Manual
Connecting external devices, USB
iOS is compatible with many external devices, MIDI controllers and sound cards.
Devices with iOS compatible connectors
Some devices have iOS compatible Lightning or (older) 30-pin connectors, such as the Numark iDJ Pro. You can
directly connect these to your iOS device, and they can charge and power it as well.
Some products support the older, 30-pin connector only. Don't worry, Apple has the "Lightning to 30-pin Adapter" to
cover this. It works great.
USB devices
You can connect USB devices using the "Lightning to USB Camera Adapter" (or the "Camera Connection Kit" for
older iOS devices with 30-pin connectors). Always use the original from Apple, third-party adapters have
instability problems.
Don't get confused by the name "camera adapter". iOS devices can not host USB devices, and this adapter is aUSB host peripheral. Don't worry, this is NOT a hack. USB audio and MIDI through this adapter is an official iOS
feature.
-
8/16/2019 DJ Player ProUser Manual
14/38
A USB device must be USB Class Compliant to be compatible with iOS. Not every USB device is designed
according to this standard (unfortunately). A good indicator for class compliance if the USB device doesn't require
a driver to work with Mac OSX.
Powered USB hubs
If iOS displays "The connected USB device requires too much power" or you would like to connect multiple USB
devices, use a powered USB hub. Even if your USB device has it's own power adapter, iOS may still complainabout power usage.
Prefer powered USB hubs with 1A or stronger power adapters and USB 3.0 compatiblity (it ensures a modern chip).
1. Connect the camera adapter to your iOS device.
2. Connect the USB hub's "PC port" or "PC cable" (the one you would connect to a computer normally) to the
camera adapter.
3. Connect your USB MIDI or audio device with its own USB cambe to the USB hub.
iOS device! camera adapter! USB hub! USB devices
External Audio Devices
iOS can handle just one external audio device at a time, with the "last plugged in" policy. The device you last
plugged in will have the audio.
Use an audio device with 2 or more stereo outputs for separate pre-listening and master signals. Audio devices with
1 stereo output can not be used for this purpose due an iOS bug.
You can also use a DJ splitter cable. DJ Player was the very first software to support those (together with
Stereomusik, we invented it).
Controllers by Native Instruments
-
8/16/2019 DJ Player ProUser Manual
15/38
Controllers by Native Instruments are not MIDI, they use a custom closed protocol. It's only the driver you install on
your computer creating a virtual MIDI device. As you can not install drivers on iOS, Traktor DJ is the only software
able to communicate with their controllers.
Native Instruments sound cards work GREAT with DJ Player. For example, the Traktor Audio 2 is small, powerful and
can also charge your iOS device.
MIDI
DJ Player Pro offers a complete set of MIDI functionality. Hold SHIFT and tap on the gear icon to go into SETTINGS,
then choose MIDI on the top.
What is a DJ MIDI controller, really?
A big dumb box with controls sending nothing but control messages to the DJ software on your iOS device (or
computer). When you push a button, turn a knob or move a fader, the MIDI controller sends a short message in
MIDI format over the USB.
Nothing more happens, really. Everything else happens in the DJ software. It's interesting to see that DJs pay $$$
for dumb boxes (the controllers), but doesn't really like to pay for the DJ software, which does almost everything.
But that's a different story.
The DJ software can also send MIDI messages to the MIDI controller, to light up some LEDs. If the MIDI controller
hosts an audio device (sound card), it's a distinct device in the same box -- has nothing to do with MIDI.
What is a MIDI mapping?
MIDI mappings are data tables, connecting the MIDI messages to features in the DJ software. The DJ software
doesn't know what to do when it receives a MIDI message, if there is no mapping. A MIDI device "comes alive"
when the DJ software has a mapping for it.
DJ Player comes with factory mappings for many DJ MIDI controllers. Just plug them in, and DJ Player will
recognize and use the factory mapping immediately.
You can also customize the factory mappings, or create your own MIDI mappings from scratch for any MIDI device.
There is no "midi mapping standard". Every DJ software has it's own mapping format. DJ Player's MIDI mappings
have the .djpmap extension. DJ TechTools has a great mapping community where you can search for mappings.
MIDI options
MIDI soft takeover: if a control is moved on screen and it no longer matches the hardware control, the control
will not update until the hardware control matches the onscreen value.
Jog rotation is 4 beats: novel feature for scratch DJs. Read more at DJWORX.
Receive MIDI from apps: apps on the iOS device can also send MIDI messages to DJ Player, so you can build
custom user interfaces with MIDI control apps for example. Use this MIDI Table for mapping.DJ Player Pro can send MIDI Clock signal to send synchronisation messages for other software or external
devices, such as synthesizers.
-
8/16/2019 DJ Player ProUser Manual
16/38
Next!
How to map a feature to a MIDI control?
1. Create or customize a mapping.
2. Tap on the mapping's name to open the MIDI Editor.
3. Find the feature you would like to map, and tap on it.
4. A feature may have multiple input options and an output (for LED) too. You need to map one input at least. Tap
on LEARN and follow the on-screen instructions.
Alternatively, tapping on the input or output option you can manually edit the MIDI properties (channel, command,
number, type, etc.).
" Table of contents.
20,274 people like this. Sign Up to see what
your friends like.LikeLike
-
8/16/2019 DJ Player ProUser Manual
17/38
http://djplayerpro.com/levels.html
2016-04-02 11:02 PM
DJ Player Pro Manual
-
8/16/2019 DJ Player ProUser Manual
18/38
Levels and VU MetersDJ Player Pro User's Manual
How to set your track's volume in DJ Player Pro for best results
Getting great sounding, distortion-free audio with DJ Player Pro is easy:
For normal playback, if the green circle lights up, you are doing fine and the level is good. You’ve got nothing to
worry about.
For effects or blending multiple tracks together, going to yellow or even to red temporarily is okay.
DJs use the gain control for setting a track's reference loudness. Tap on the volume fader () to reveal the
GAIN control. Play the track at a loud part. Adjust GAIN until the channel's VU meter (the two circles thing) light up
in green.
Auto-gain is enabled by default. It adds gain if a track's average volume is below -11 db. -11 db is a good
reference point for quality mixing. Unfortunately, some very modern tracks may be even louder than that, sounding
"overcompressed". Google "loudness war" for more information.
The story behind DJ Player Pro's unique metersAs you know, there are only two kinds of DJs:
"The Good Guys" who take care to play around the reference, 0 db level. Always in the green, never in the
-
8/16/2019 DJ Player ProUser Manual
19/38
red. (Sound technicians set up sound systems to this level.)
"The Bad Guys" push it to the very last red LED, because it looks cool and they think it's louder. Despite the
fact, that often there is a volume control in line AFTER their mixer, and the real loudness is in the hands of the
sound technician.
With regard to loudness and levels, it bears repeating, digital audio is very different from analog audio.
DJ Player Pro processes audio in the 32-bit floating point format, which has roughly -145 db precision in the
ordinary audio range (-1.0f to 1.0f), and 42 db headroom above that. That’s more than enough for studio grade
audio and any kind of mixing you might want to do.
Remember, decibels are logarithmic. 6 db is 2x volume. 42 db headroom is far more than enough. (Most club
sound systems will NOT amplify the mixer’s line output by 42 db to the speaker cables...)
But digital audio will end up in some audio output with a limited range, for example, a sound card or an audio file (a
recording). Despite of the great, almost limitless internal processing factors, the last step, the output must fit into the
output's limits. If it doesn't, pure digital distortion will happen. Digital distortion sounds much worse than analog
distortion: it crackles.
One might think the solution is easy, as we have -145 db precision: reserve a broad range for the headroom (such
as 25 db), and the rest (120 db) for regular audio. But the output of the sound card or the loudness of the recording
would become too low this way, relative to other applications or tracks.
Analog DJ mixers have a simple trick for the loudness problem: they have powerful pre-amps inside, and when "the
bad guys play in the red" at the maximum volume, the pre-amps usually remain below the distortion threshold. In
other words, analog DJ mixers have been designed to handle the bad guys.
Most DJ applications solve this problem a bit differently. Namely, they employ a limiter. But our approach is different
than most so we can get you clean sound all the time: DJ Player Pro's solution is based on how DJs actually see the
VU meter.
VU Meter The Good Guy POV The Bad Guy POV
-
8/16/2019 DJ Player ProUser Manual
20/38
LED State
Green Audio is being played. Nothing to worry about. No
actionable information provided.
Audio is being played. Boring!
Yellow Good levels and loud enough. Maybe approaching
louder than it should be. I’ll keep my eye on it.
We’re getting somewhere. But it’s still not
loud enough.
Let’s do this!*cranks volume up*
Red Distortion, too loud. Let’s back it down a bit. NOW it looks great. I’m the best fucking
DJ in the world! Fuck off Tiesto!
*FIST PUMP*
As you can see, most of the segments of the VU meter aren't actually useful for a DJ -- although they look good
when they light up -- because DJing is not music production, where those segments matter a lot.
The loudness meters in DJ Player Pro have been simplified and are represented by two circles. This system isdesigned to have the reference, 0 db level to look the best, encouraging DJs to play around there.
The circle on the right shows levels below the reference. The main purpose of this circle is to show "some audio is
being played".
The circle on the left shows levels equal or above the reference, 0 db level. Green is good, yellow is "okay" (with
accent), red is "too much".
DDJ Player Pro provides 6 db headroom above the reference level, and also has a hard-knee clipper above 3 db.
Don't be fooled by the moniker, "hard-knee", it actually sounds transparent and smooth. If you play within the "green"
channel meters, mixing will not give you any trouble as the signal will rarely approach the clipper.
The left circle changes to red if the signal nears the clipper. If you somehow reach 6 db, you are still within the
range of any sound card or output audio format. When both circle's are red, you are outside the range and digital
-
8/16/2019 DJ Player ProUser Manual
21/38
Next!
distortion will likely occur.
The tests with our beta testers showed that there is absolutely zero learning curve with this new DJ VU meter
system. Nobody had any problems with it.
Yes, the two circles could have been simplified further to just one circle. But our prototypes showed that it's much
harder to perceive and act upon -- the small illusion of "movement" from the right circle to the left is a great
mechanism for maximum visibility. And finally, the distortion levels look ugly, as they should.
" Table of contents.
20,274 people like this. Sign Up to see what
your friends like.LikeLike
-
8/16/2019 DJ Player ProUser Manual
22/38
http://djplayerpro.com/allcontrols.html
2016-04-02 11:02 PM
DJ Player Pro Manual
-
8/16/2019 DJ Player ProUser Manual
23/38
All DJ Controls Explained
DJ Player Pro User's Manual
Quick Guide
Please make sure you've completed the short 10-step Quick Guide inside the DJ Player Pro application. It covers
the basic user controls such as how the controls above the waveform work and where tap to move the waveform.
Main Controls
Control What does it do With
SHIFT
What does it do if you hold SHIFT
PLAY/PAUSE. Reverse playback. Short tap: continous
reverse, longer tap: reverse until you hold
the button.
!! CUE. Jump back to the last cue point and stop.
The cue point is marked by a circle near the
waveform.
!! CUE-PLAY, CUP. Jump back to the last
cue point and play.
" EXIT LOOP. Appears at the place of the CUE
-
8/16/2019 DJ Player ProUser Manual
24/38
button when the track is looping.
[ IN. Sets the cue point or the beginning of the
loop.
Scratch stop.
] OUT. Sets the cue point or the beginning of the
loop.
Turntable stop.
# IN ADJUST. Appears when the track is looping.
Tap it to adjust the beginning of the loop.
# OUT ADJUST. Appears when the track is
looping. Tap it to adjust the end/length of the
loop.
$ Opens the track browser. % Opens SETTINGS.
The and buttons
Status What do they do
Paused track FRM. Moving the waveform by a little.
Normal playback PITCH BEND. Slows down or speeds up the track by a little, until you hold the button.
IN ADJUST Moves the beginning of the loop by one beat (or by a little amount with SHIFT).
OUT ADJUST Sets the length of the loop (or moves the end of the loop by a little amount with SHIFT).
Controls visible with SHIFT only
Control What does it do
MIX Shows the mixing related controls over the waveform.
1-8 Shows the eight cue/loop point buttons over the waveform.
GRID Shows the beatgrid related controls over the waveform.
STEMS Shows the STEMS audio format related controls over the waveform.
&' Pre-listening.
REC Recording.
-
8/16/2019 DJ Player ProUser Manual
25/38
MIX Controls
Control What does it do With
SHIFT
What does it do if you hold
SHIFT
SYNC SYNC button. It has 3 states:
SYNC: tempo and beat sync (a'la Traktor,
quantized).
TEMPO: tempo sync only (no quantize).
MAN: fully manual beatmatching.
SLIP SLIP switch (aka FLUX mode).
ROLL FX1. Each deck has 3 effect slots. This controls the
main parameter of the first effect slot.
It shows the current effect's name (which is ROLL by
default). The effect is enabled until you hold the control.
ROLL Provides access to additional FX1
controls without enabling the
effect.
JET FX2. See ROLL, but this is for the second effect slot. JET See ROLL, but this is for the
second effect slot.
ECHO FX3. See ROLL, but this is for the third effect slot. ECHO See ROLL, but this is for the third
effect slot.
( ZOOM. Changes the zoom level and the waveform
style.
Channel volume fader. The GAIN control is also
displayed when you tap this.
[4] AUTO LOOP. Starts an instant loop and changes the
loop length.
The number between the square bracket shows the
loop length in beats. [4] means 4 beats.
[4] Set the auto loop length without
enabling looping.
) LOW. Bass equalizer control.
) MID. Midrange equalizer control.
) HIGH. Treble equalizer control.
)) FILTER. Lowpass/highpass filter.
0.00 TEMPO. Tempo control (aka pitch fader).
Controls displayed when you tap on TEMPO
Control What does it do
-
8/16/2019 DJ Player ProUser Manual
26/38
±8 TEMPO RANGE (aka pitch range). Adjusts the range of the tempo control.
Displays the current range.
KEYLOCK (aka master tempo or time stretching).
8A or $ PITCH SHIFT. Changes the overall key (tone) of the track.
Displays the current key. Works only if KEYLOCK is enabled.
Controls displayed when you tap on FX1, FX2 or FX3
Control What does it do
ROLL EFFECT SELECTOR. Change the effect type of the slot here. Displays the current effect's name.
100% SECONDARY PARAMETER. Adjusts the secondary parameter of the effect, and displays its current
value.
1/2
BEAT
THIRD PARAMETER. Adjusts the third parameter of the effect, and displays its current value. Not every
effect has a third parameter.
LOCK EFFECT LOCK. Enables the current effect permanently, so you don't need to hold the main
parameter's control.
1-8 Controls
8 buttons for cue points or loops (8 slots). They can have 3 different states:
What is displayed What does it mean
+ This slot is empty.
1..8 This slot is a cue point.
[1]..[8] This slot is loop.
Hold SHIFT and tap on a point to delete it.
Grid Controls
Control What does it do
-
8/16/2019 DJ Player ProUser Manual
27/38
Next!
TAP If you play the music, then TAP the beats to help DJ Player detect the correct bpm.
-, 120.00, + Adjusts the bpm value. Tap on the bpm value to double or halve.
AUTO Resets the beatgrid to DJ Player's original detection.
! ! Moves the grid by a small amount.
! Sets the grid to the current position.
STEMS controls
Each stem has a volume control, which displays the name of the stem. Move to gradually change the volume, or
double-tap to toggle.
Hold SHIFT to switch effect routing for each stem. If FX is off for a stem, then the stem's audio stays dry even if youenable an effect.
Each stem has a lowpass/highpass filter as well.
" Table of contents.
20,274 people like this. Sign Up to see what
your friends like.
LikeLike
-
8/16/2019 DJ Player ProUser Manual
28/38
http://djplayerpro.com/preparation.html
2016-04-02 11:02 PM
DJ Player Pro Manual
-
8/16/2019 DJ Player ProUser Manual
29/38
Track Preparation, Beatgrids
DJ Player Pro User's Manual
Music Library Recommendations
DJ Cloud identifies music by artist + title + duration metadata. When you import a track into your music
library, check and set the artist + title appropriately and correctly, and never change after!
Organize your music! Playlists, genres and albums are essential.
Mixed In Key users: as DJ Cloud identifies music by artist + title + duration, put your metadata into iTunes'
comment field and not into artist or title.
Beatgrid
DJ Player Pro can automatically analyze a track and find its bpm value and set the beatgrid. You can analyze
multiple tracks at once, if you list them in the track browser and tap on the ! icon at the top right corner.
As no DJ application is perfect, the automatic bpm and beatgrid detection may provide inappropriate results. You
may need to fix the beatgrid by hand for some tracks.
After you imported a new track into your library and correctly set its artist + title information, load it in DJ
Player to check the beatgrid.
-
8/16/2019 DJ Player ProUser Manual
30/38
-
8/16/2019 DJ Player ProUser Manual
31/38
20,274 people like this. Sign Up to see what
your friends like.LikeLike
-
8/16/2019 DJ Player ProUser Manual
32/38
http://djplayerpro.com/manual
2016-04-02 11:01 PM
DJ Player Pro Manual
-
8/16/2019 DJ Player ProUser Manual
33/38
DJ Player Pro User's ManualBefore reading this manual, please make sure you've completed the short 10-step Quick Guide inside the DJ Player
Pro application. It covers the basic user controls such as how the controls above the waveform work and where tap
to move the waveform.
Storage Space
DJ Player Pro doesn't use much storage space for metadata, typically less than 1 GB for very large libraries. It
doesn't have significant impact on your iCloud storage/backup space either.
Always keep 1 GB free space for smooth iOS operation. Not specifically for DJ Player, but every application will be
smoother this way.
Keep free space in mind before recording. One hour needs around 700 MB, plus you need 1 GB for smooth iOS
operation: you need 1.7 GB free for a glitch-free 1 hour recording.
Table of contents
1. Music Library, Track Browser, Audio Files, Recording
2. Track Preparation, Beatgrids
-
8/16/2019 DJ Player ProUser Manual
34/38
3. All DJ Controls Explained
4. Levels and VU Meters
5. MIDI, External Devices, USB audio
6. DVS (Timecode, Turntable Control)
7. Managing Your Data, Database
20,274 people like this. Sign Up to see what
your friends like.LikeLike
-
8/16/2019 DJ Player ProUser Manual
35/38
http://djplayerpro.com/musiclibrary.html
2016-04-02 11:01 PM
DJ Player Pro Manual
-
8/16/2019 DJ Player ProUser Manual
36/38
Music Library, Track Browser, Audio Files, RecordingDJ Player Pro User's Manual
Your Music Library
DJ Player Pro can load music from various sources:
iOS Music Library
The primary music source on iOS devices. Manage your tracks in iTunes (on your computer), then transfer them to
your iOS device with either ways:
Manual Sync: you can sync your entire library or just selected playlists, artists, albums and genres. Here is
how.
iTunes Match: if you are an iTunes Match subscriber, you can have your entire library stored in Apple's cloud
and access your music online. Third-party applications, such as DJ Player Pro can read fully downloaded,
offline music only.
You can make your music available offline in the default music player app by Apple. You can make distinct
tracks or entire playlists offline, and removing downloads is also possible.
We are using and testing both ways here at iMect.
Apple Music: Apple Music is NOT iTunes Match -- you can use both services simultaneously. Apple Music offers
streaming access to a huge music library (similar to Spotify), while iTunes Match offers cloud storage for tracks you
own (purchased or acquired somehow). Copyright protects tracks in Apple Music from third-party access, DJ apps
-
8/16/2019 DJ Player ProUser Manual
37/38
can not load Apple Music tracks. If you would like to play a track from Apple Music, you must purchase (acquire) it
first.
iTunes File Sharing
This iTunes feature offers direct, drag-and-drop file copy to DJ Player Pro's "Documents" folder. Unfortunately, you
can not create or manage subfolders there, so this is a limited way to transfer audio files. How to use iTunes File
Sharing.
Deezer
Deezer provides online access to an enourmous music library, similar to Apple Music or Spotify, but has a better
dance music pool. If you have a Deezer Premium Plus account, DJ Player Pro can load any music from Deezer.
Offline storage is not possible due copyright rules.
Dropbox
DJ Player Pro can load audio files from your Dropbox storage.
Native Instruments STEMS audio files
iTunes to iOS synchronisation doesn't work properly with STEMS yet. When you import a STEMS file into iTunes and
sync it to the iOS device, iTunes removes everything but the main track. You need to transfer STEMS audio files
directly with iTunes File Sharing, or use Dropbox.
Music Library Recommendations
DJ Cloud identifies music by artist + title + duration metadata. When you import a track into your music
library, check and set the artist + title appropriately and correctly, and never change after!
Organize your music! Playlists, genres and albums are essential.
Mixed In Key users: as DJ Cloud identifies music by artist + title + duration, put your metadata into iTunes'
comment field and not into artist or title.
Essential Track Browser Controls
Control What does it do
! QUEUE: the queue is a temporary playlist you can manage. Tap on the artwork, duration, bpm, key or
comment field of a track to add it to the queue (tap again to remove). Tap the QUEUE icon on thetoolbar to view the queue.
Drag the artwork, duration, bpm, key or comment field of a track to change a track's position in the
queue. When a track has been played in the queue, it will be removed automatically.
-
8/16/2019 DJ Player ProUser Manual
38/38
Next!
" HISTORY: the list of the recently played tracks.
# SEARCH: searches in artist, title and comment in every music source.
$ MORE: additional actions for the current view, such as change order, analyze tracks or copy to
clipboard.
Recordings
DJ Player has a great high quality internal recorder. Regardless of the current audio output configuration, it always
records in stereo, lossless WAV. Make sure you have enough storage space for your recording! One hour
needs around 700 MB.
Make sure you adjust your track's playback volume to play "in the green" while recording. This provides great
uncompressed audio quality and enough headroom for mixing and mastering. It's okay to temporary go into the
yellow or red while blending from one track to the another.
Recordings are saved to "Recordings" (on the root of the track browser). If you tap on a recording, choose OPEN IN
to copy to other apps on your device.
Transfer your recordings to your computer with iTunes File Sharing. DJ Player Pro saves a text file for each recording
with artist, title and timing information.
" Table of contents.
20,274 people like this. Sign Up to see what
your friends like.LikeLike