Displays - Aveo Systems...Aveo Systems is a leading provider of intuitive and easy-to-use solutions...
2
Aveo Systems, Inc. • 1791 West Oak Parkway • Suite 8 • Mariea, GA 30062 • Phone: +1.678.653.7090 Fax: +1.844.fax.aveo • Email: [email protected] • www.aveosystems.com R SYSTEMS Samsung Displays (Infrared) Displays The Samsung family of displays, also known as Samsung Consumer or Prosumer displays, can be controlled with Mira Connect™, Aveo Systems’ smart control appliance via the Samsung Displays Infrared (IR) interface on the Samsung display. Mira Connect communicates and controls Samsung displays over an IP connecon using the Global Cache IP2IR IP to IR interface accessory. To integrate a Samsung display with Mira Connect using IR, first set up the GlobalCache IP2IR device on the network and connect the IR emier cable to the display to the display’s IR receiver from the Global Cache device using IR Connector 1, 2, or 3 as shown in the figure. Browse into the IP2SL and set the port operaon to IR output for the IR ports that will be used as an IR emier. See our Global Cache integraon guide for more informaon for seng up Global Cache products. Add the Samsung, labeled “Samsung IR” to the room in Mira Portal (hps://mira.aveosystems.com), enter the IP address of the GlobalCache IP2IR device, and the IR Connector number used on the IP2SL for the IR emier and press ‘add equipment’. Mira Portal shows the equipment status as a green circle if the network connecon is valid to the IP2SL, otherwise the warning symbol, ! , will appear indicang the IP address is not correct for the IP2IR interface. Specify which video inputs are used on the display by selecng Edit from the device’s menu, selecng the Video Inputs tab and enabling an input, selecng an icon, and entering text labels for the desired inputs. This will create a display menu. While the Mira Connect universal equipment driver supports all inputs available across on Samsung displays, not all models will have all inputs. Enable only the inputs that will be used in the room. An oponal display name may be entered which is useful when there are mulple displays in a room. See the Mira Connect Administrators Guide for more informaon about using Mira Portal to set up Mira Connect. Important informaon about the integraon is summarized below. Control Interface Opons Network connecon with TCP, port 4998, using the Global Cache IP2IR interface. Use Global Cache’s iHelp program to discover the device’s IP address, then browse into the device to set the desired mode on the IR port. The GlobalCache IP2SL (part number 151.0012.001) is available as an accessory from Aveo Systems. See the Mira Connect Global Cache integraon guide for more informaon. 2 Step Mira Connect Integraon R SYSTEMS 192.168.80.124 Samsung IR Equipment ADD 1 Step 3 Step Add Equipment ADD EQUIPMENT CANCEL CONNECTION VIDEO INPUTS Equipment Type* Select model number* IR Connector IP Address or Hostname* Simulate equipment 192.168.80.124 1 Samsung IR Universal Didn’t find your equipment? Request it! Questions about Samsung IR? See the integration guide. i 1 2 3 ADD EQUIPMENT CANCEL Video Conferencing ROOM COMPUTER Corporate Information DIGITAL SIGNAGE News Channel TV TUNER Select source: Display Name (Optional) This menu will appear on Mira Connect. If you have more than one display, enter a name for each. Drag items to change order. The first item is the default selected input. Samsung IR Add Equipment Equipment Type * Model * Icon Label Description (Optional) HDMI 1 ROOM COMPUTER Video Conferencing Description (Optional) Corporate Informaon Icon Label DIGITAL SIGNAGE Icon Label Description (Optional) Simulate equipment Universal HDMI 2 DVI-D Menu Preview CONNECTION VIDEO INPUTS TV TUNER News Channel
Transcript of Displays - Aveo Systems...Aveo Systems is a leading provider of intuitive and easy-to-use solutions...
Aveo Systems, Inc. • 1791 West Oak Parkway • Suite 8 • Marietta, GA 30062 • Phone: +1.678.653.7090 Fax: +1.844.fax.aveo • Email: [email protected] • www.aveosystems.com
R
S Y S T E M S
Samsung Displays (Infrared)Displays
The Samsung family of displays, also known as Samsung Consumer or Prosumer displays, can be controlled with Mira Connect™, Aveo Systems’ smart control appliance via the Samsung Displays Infrared (IR) interface on the Samsung display. Mira Connect communicates and controls Samsung displays over an IP connection using the Global Cache IP2IR IP to IR interface accessory.
To integrate a Samsung display with Mira Connect using IR, first set up the GlobalCache IP2IR device on the network and connect the IR emitter cable to the display to the display’s IR receiver from the Global Cache device using IR Connector 1, 2, or 3 as shown in the figure. Browse into the IP2SL and set the port operation to IR output for the IR ports that will be used as an IR emitter. See our Global Cache integration guide for more information for setting up Global Cache products.
Add the Samsung, labeled “Samsung IR” to the room in Mira Portal (https://mira.aveosystems.com), enter the IP address of the GlobalCache IP2IR device, and the IR Connector number used on the IP2SL for the IR emitter and press ‘add equipment’.
Mira Portal shows the equipment status as a green circle if the network connection is valid to the IP2SL, otherwise the warning symbol, ! , will appear indicating the IP address is not correct for the IP2IR interface.
Specify which video inputs are used on the display by selecting Edit from the device’s menu, selecting the Video Inputs tab and enabling an input, selecting an icon, and entering text labels for the desired inputs. This will create a display menu. While the Mira Connect universal equipment driver supports all inputs available across on Samsung displays, not all models will have all inputs. Enable only the inputs that will be used in the room. An optional display name may be entered which is useful when there are multiple displays in a room.
See the Mira Connect Administrators Guide for more information about using Mira Portal to set up Mira Connect.
Important information about the integration is summarized below.
Control Interface Options
Network connection with TCP, port 4998, using the Global Cache IP2IR interface.
Use Global Cache’s iHelp program to discover the device’s IP address, then browse into the device to set the desired mode on the IR port. The GlobalCache IP2SL (part number 151.0012.001) is available as an accessory from Aveo Systems. See the Mira Connect Global Cache integration guide for more information.
2Step
Mira Connect Integration
R
S Y S T E M S
192.168.80.124
Samsung IR
Equipment ADD
1Step
3Step
Add Equipment
ADD EQUIPMENTCANCEL
CONNECTION VIDEO INPUTS
Equipment Type* Select model number*
IR Connector
IP Address or Hostname*
Simulate equipment
192.168.80.124
1
Samsung IR Universal
Didn’t �nd your equipment? Request it!
Questions about Samsung IR? See the integration guide.i
1 2 3
ADD EQUIPMENTCANCEL
Video ConferencingROOM COMPUTER
Corporate InformationDIGITAL SIGNAGE
News ChannelTV TUNER
Select source:
Display Name (Optional)
This menu will appear on Mira Connect. If you have more than one display, enter a name for each. Drag items to change order. The first item is the default selected input.
Samsung IR
Add Equipment
Equipment Type * Model *
Icon Label
Description (Optional)
HDMI 1 ROOM COMPUTER
Video Conferencing
Description (Optional)
Corporate Information
Icon Label
DIGITAL SIGNAGE
Icon Label
Description (Optional)
Simulate equipmentUniversal
HDMI 2
DVI-D
Menu Preview
CONNECTION VIDEO INPUTS
TV TUNER
News Channel
R
S Y S T E M S
For more information please contact our Sales Department at [email protected].
About Aveo SystemsAveo Systems is a leading provider of intuitive and easy-to-use solutions for audio, video, and collaboration, improving how systems are used and managed by customers world-wide.
DS-11034-001 Version 2019_05_05
Specifications subject to change without notice. Aveo Systems and the Aveo logo are registered trademarks. All other trademarks are the property of their respective owners.
Mira Connect Integration with the Samsung Displays with IR
Control ScopeMira Connect controls the source selections and power state of the display.
There is no support for volume control of the display. Use a DSP audio conference device or video conferencing system for volume control.
Supported ModelsMira Connect supports the UN-series of Samsung displays.
Software VersionsTested with various Samsung UN and QN series models.
