Varelrollerconedrillbits 13261086839331-phpapp01-120109053222-phpapp01
dispersedyeingproject-131214224201-phpapp01.pptx
Transcript of dispersedyeingproject-131214224201-phpapp01.pptx
![Page 1: dispersedyeingproject-131214224201-phpapp01.pptx](https://reader031.fdocuments.in/reader031/viewer/2022013004/5695d4891a28ab9b02a1ccab/html5/thumbnails/1.jpg)
Disperse Dyes
![Page 2: dispersedyeingproject-131214224201-phpapp01.pptx](https://reader031.fdocuments.in/reader031/viewer/2022013004/5695d4891a28ab9b02a1ccab/html5/thumbnails/2.jpg)
Disperse Dyes
• The term “disperse dye” have been applied to the organic
colouring substances which are free from ionizing groups, are
of low water solubility and are suitable for dyeing
hydrophobic fibres.
• Disperse dyes are the only water insoluble dyes that dye
polyester and acetate fibers. Disperse dye molecules are the
smallest dye molecules among all dyes.
![Page 3: dispersedyeingproject-131214224201-phpapp01.pptx](https://reader031.fdocuments.in/reader031/viewer/2022013004/5695d4891a28ab9b02a1ccab/html5/thumbnails/3.jpg)
• Disperse dyes are used for dyeing man made cellulose ester
and synthetic fibres specially acetate and polyester fibres and
sometimes nylon and acrylic fibres.
• Carrier or dispersing agents are required for dyeing with
disperse dyes.
• Disperse dyes have fair to good light fastness with rating
about 4-5.
![Page 4: dispersedyeingproject-131214224201-phpapp01.pptx](https://reader031.fdocuments.in/reader031/viewer/2022013004/5695d4891a28ab9b02a1ccab/html5/thumbnails/4.jpg)
MECHANISM OF DISPERSE DYE
Wander Wall’s Forces.High affinity for Fibers.Attraction between Fiber Surface and the Dye Molecule.
STRUCTURE
![Page 5: dispersedyeingproject-131214224201-phpapp01.pptx](https://reader031.fdocuments.in/reader031/viewer/2022013004/5695d4891a28ab9b02a1ccab/html5/thumbnails/5.jpg)
SOLUBILITY
Non-Soluble in Water.
CHARGEABILITY
Neutral Charge.Penetrate Because of Transition State of Synthetic Fibers.
ENVIRONMENT BEHAVIOURNon-Environmental Friendly.Human effect dyeing method.
![Page 6: dispersedyeingproject-131214224201-phpapp01.pptx](https://reader031.fdocuments.in/reader031/viewer/2022013004/5695d4891a28ab9b02a1ccab/html5/thumbnails/6.jpg)
FASTNESS PROPERTIES
Washing : Good .Lightening : Good .Crocking : Good .Gas Fume Fade : Average .
APPLIANCES
They are Applied to Synthetic Fibers such asAcetate, Triacetate, Polyester, Nylon and Acrylic.
![Page 7: dispersedyeingproject-131214224201-phpapp01.pptx](https://reader031.fdocuments.in/reader031/viewer/2022013004/5695d4891a28ab9b02a1ccab/html5/thumbnails/7.jpg)
COLOUR RANGE
Wide Range of Colors.Bright and Lighter Shades.Major Colors: Pale Yellow and Blue.
COSTCheap method for dyeing process .
![Page 8: dispersedyeingproject-131214224201-phpapp01.pptx](https://reader031.fdocuments.in/reader031/viewer/2022013004/5695d4891a28ab9b02a1ccab/html5/thumbnails/8.jpg)
Other agents used in Polyester dyeing
Dispersing Agent
• It increases the solubility of the dye in water .
• It helps to increase the rate of the dye exhaustion .
![Page 9: dispersedyeingproject-131214224201-phpapp01.pptx](https://reader031.fdocuments.in/reader031/viewer/2022013004/5695d4891a28ab9b02a1ccab/html5/thumbnails/9.jpg)
Leveling Agent
• Leveling agents hold the rate of the dyeing and helps to get uniform dyeing.
Buffer
• These agents protect the dye from reduction in high temperature bath .
![Page 10: dispersedyeingproject-131214224201-phpapp01.pptx](https://reader031.fdocuments.in/reader031/viewer/2022013004/5695d4891a28ab9b02a1ccab/html5/thumbnails/10.jpg)
The Methods Can Be Employed In The Dyeing Of Polyester
High temperature dyeing process .
Thermosol process.
![Page 11: dispersedyeingproject-131214224201-phpapp01.pptx](https://reader031.fdocuments.in/reader031/viewer/2022013004/5695d4891a28ab9b02a1ccab/html5/thumbnails/11.jpg)
High Temperature Dyeing Process
• High temperature dyeing of polyester can be done in Beam Dyeing machines , Jet dyeing machines and Pressure Jiggers .
• This method dye applied under pressure at temperature of about 130`c .
• Heating help to swell the highly compact polyester polymer and make availablemore space for the dye molecule to enter in to the amorphous region of the fiber .
![Page 12: dispersedyeingproject-131214224201-phpapp01.pptx](https://reader031.fdocuments.in/reader031/viewer/2022013004/5695d4891a28ab9b02a1ccab/html5/thumbnails/12.jpg)
Dyeing Of Polyester Fabric With Disperse Dyes By High Temperature Exhaust Method
Procedure :
Prepare The Dye Bath Using The Recipe Below
• M:L:R 1:30 to 1:40• Ammonium Sulphate 2g/l• Dispersing Agent 0.5g/l
![Page 13: dispersedyeingproject-131214224201-phpapp01.pptx](https://reader031.fdocuments.in/reader031/viewer/2022013004/5695d4891a28ab9b02a1ccab/html5/thumbnails/13.jpg)
Dye The Sample Using The Following Dyeing Cycle
![Page 14: dispersedyeingproject-131214224201-phpapp01.pptx](https://reader031.fdocuments.in/reader031/viewer/2022013004/5695d4891a28ab9b02a1ccab/html5/thumbnails/14.jpg)
Dyeing With Disperse Dye ( High Temperature Exhaust Method )
• First the dye bath is made with the dye , dispersing agent and the temperature is raised to 60`C .
• Next , Formic acid and Ammonium-Sulphate added till the pH is 5-6 .
• The dyeing should be continued and the temperature is raised to 130`C over period of 45 min.
• Then temperature reaches 130`C dyeing is done for 1 hour .
• Rinsed the sample with cold water .
• Removal the disperse dye on the surface of the fabric by using Caustic Soda and Sodium Hydrosulphite and rinsed , Neutralize the sample.
![Page 15: dispersedyeingproject-131214224201-phpapp01.pptx](https://reader031.fdocuments.in/reader031/viewer/2022013004/5695d4891a28ab9b02a1ccab/html5/thumbnails/15.jpg)
Thermolsol Process
• This process is suitable for mixed fabric of Poly-Cotton or Poly-Wool .
• The thermo-sol dyeing process is consists of the following stages .
Padding Drying
After Treatment
Thermofixing
![Page 16: dispersedyeingproject-131214224201-phpapp01.pptx](https://reader031.fdocuments.in/reader031/viewer/2022013004/5695d4891a28ab9b02a1ccab/html5/thumbnails/16.jpg)
Padding
The Padding Carried Out At 30 - 40`C With The Following Ingredients
• Dispensing Agent• Water• Disperse dye• Acetic Acid ( pH 6 – 7 )• Wetting Agent• Neutral alginate thickener
![Page 17: dispersedyeingproject-131214224201-phpapp01.pptx](https://reader031.fdocuments.in/reader031/viewer/2022013004/5695d4891a28ab9b02a1ccab/html5/thumbnails/17.jpg)
Thermosol Process
• After padding the cloth with the dye and the other dried .
• Next stage is fixation of the disperse dye , the cloth is passed through a hot air pin stenter for 60 second at 190 – 210 `C.
• After heat treatment the cloth washed .
![Page 18: dispersedyeingproject-131214224201-phpapp01.pptx](https://reader031.fdocuments.in/reader031/viewer/2022013004/5695d4891a28ab9b02a1ccab/html5/thumbnails/18.jpg)
Thank You
Ashan Ranasinghe
Gayan Weerasinghe