6/4/2017

1

Dispensing Techniques

Compounding and Good Practice

6/4/2017 BA-FP-JU-C

Compounding (Extemporaneous Dispensing)

• Definition: A small-scale manufacture of medicines frombasic ingredients in the community or in hospital pharmacy (vs. medicines manufactured by the pharmaceuticalindustry).

• Extemporaneous dispensing should only be used whenmedicines are not available commercially in the market:

Low demand. Requires an individualized dose, e.g. paediatric. Requires an individualized formulation for a patient.

6/4/2017

2

The working environment

• Organization• Cleanliness

The bench, the equipment, utensils & the container. Lack ofcleanliness can cause contamination of the preparation with otheringredients or a microbial contamination.

• AppearanceA clean white overall, closed, hair tied up.

• Documenting procedures and results Keeping comprehensive records for a minimum of 2 years (ideally 5

years) and include the formula, the ingredients and quantities used,their sources, batch numbers and expiry date.

The record for a prescribed item should also include the patient andprescription details and date of dispensing.

A record must be kept for the personnel involved including theresponsible pharmacist.

Methodical approach.

6/4/2017 BA-FP-JU-C

EQUIPMENTA. Weighing

• Class B dispensing balance (torsion balances)have traditionally been used in dispensing.These balances are designed for the weighing ofmedicinal or pharmaceutical substancesrequired in filling of prescriptions or in a smallscale compounding.

• Electronic balances (digital) are more commonnowadays.

6/4/2017 BA-FP-JU-C

6/4/2017

3

EQUIPMENT

6/4/2017 BA-FP-JU-C

Torbal torsion balance ( class B) and Ohaus electronic

balance.

EQUIPMENT

6/4/2017 BA-FP-JU-C

Set of metric weights

6/4/2017

4

EQUIPMENTA. Weighing

•When weighing, some important rules to ensure gooddispensing practice:If using a solid material which requires to be size reduced(ground) or sieved, always ensure that this is carried outbefore weighing the required quantity.As far as possible never split quantities and do twoweightings, as this will increase the inaccuracies.Minimum weighable quantity (MWQ) should beconsidered: If a quantity less than the MWQ needed, it isnecessary to:weigh the minimum weight allowable (or more) and makean excess of the productor prepare it by trituration.

BA-FP-JU-C

EQUIPMENTB. Measuring liquids

• Liquid measures :

Graduated pipettes

Cylindrical measures

Conical measures

6/4/2017 BA-FP-JU-C

Volume error

differentials due

to instrument

diameters

6/4/2017

5

6/4/2017BA-FP-JU-C

EQUIPMENT

Examples of metric-scale

cylindrical (A) and conical pharmaceutical graduates (B).

EQUIPMENT

B. Measuring liquids…….cont.,

• Rules for measurement:

Use the smallest measure.

Do NOT split measures.

Measurement by difference for viscous liquids.

Measuring small volumes: by small conical measure, bygraduated pipettes, and by trituration.

Taring of containers (next slides).

6/4/2017 BA-FP-JU-C

6/4/2017

6

EQUIPMENTB. Measuring liquids…….cont.,

Tared containers

• For what purpose?

Liquid preparations should as far as possible be made up to volume in a measure.

There are, however, instances when accurate transfer of the preparation to the final container is difficult.

With some suspensions it can be almost impossible to remove all the insoluble ingredients when pouring from one container to another.

Emulsions and viscous preparations can also be difficult to transfer accurately. In these cases a tared container should be used.

6/4/2017 BA-FP-JU-C

EQUIPMENTB. Measuring liquids…….cont.,

Tared containers

• How to tare a bottle?

A volume of water identical to the volume of the product being dispensed is accurately measured. This is then poured into the chosen medicine container and the meniscus marked with the upper edge of a small adhesive label, effectively making the bottle into a single-point measure.

The container is then emptied and allowed to drain thoroughly.

The preparation is then poured into the container and made up to volume, using the tare mark as the guide.

This procedure should be used with discretion and only in situations when major inaccuracies would occur in the transfer of liquids. It should also only be used when water is present as one of the ingredients. Putting medicines into a wet bottle is generally considered bad practice.

6/4/2017 BA-FP-JU-C

6/4/2017

7

EQUIPMENTC. Mixing & Grinding

Mortar and pestle

A. Glass mortar and pestle• Used for small quantities: Useful for dissolving small quantities of

ingredients, for mixing small quantities of fine powders

• Suitable for size reduction of friable materials (such as crystals).

• Used for the mixing of substances such as dyes which are absorbedby and stain composition or porcelain mortars.

6/4/2017 BA-FP-JU-C

EQUIPMENTC. Mixing & Grinding….cont.

B. Porcelain or composition mortars and pestles

• Larger than the glass variety andhave a rougher surface.

• Ideal for:

size reduction of solids

mixing solids and liquids, as in thepreparation of suspensions andemulsions.

6/4/2017 BA-FP-JU-C

6/4/2017

8

Manipulative techniquesCorrect equipment + Appropriate technique = Good Compounding

Practice* Mixing

The goal of any mixing operation should be to ensure that evendistribution of all the ingredients has occurred.

•Mixing of liquids: Simple stirring or shaking (the degree dependson the viscosity of liquids).

•Mixing solids with liquids: stirring rod (solution), pestle andmortar (suspension).

•Mixing solids with solids: mortar and pestle, “doubling up”procedure.

•Mixing semi-solidsrubbing them on an ointment slab using a spatula (may needdoubling up).The fusion method using a porcelain evaporating basin.

EquipmentD. FiltersFilters are used when clarification of a liquid is required.

Filter paper

• They are mainly made from wooden pulp (cellulose fibers).

• Filter paper has the disadvantages of:

introducing fibers into the filtrate

and may also absorb significant amounts of active ingredient. Suchdisadvantages are less likely to happen with the following types.

Membrane filters

• Includes wide variety of pore sizes and membrane materials(cellulose acetate, cellulose nitrate, polycarbonate, PTFE).

6/4/2017 BA-FP-JU-C

6/4/2017

9

Equipment

D. Filters

Sintered glass filters

• These do not shed fibers, are easy to clean and can be used forsubstances which attack filter paper such as potassiumpermanganate and zinc chloride.

Notes:

• A filter with a pore size 15–40 µm is suitable for mostsolutions. They will pass through by gravity, although largevolumes may be slow and need the assistance of a vacuum.

• A filter with pore size of 5–15 µm requires a vacuum.

6/4/2017 BA-FP-JU-C

Filters

6/4/2017 BA-FP-JU-C

Sintered glass filter

6/4/2017

10

Equipment

E. Heat sources

• Bunsen (gas) burners

6/4/2017 BA-FP-JU-C

The Bunsen burner, used for heating laboratory equipment and

chemicals. The flame can reach temperatures of 1,500°C.

EquipmentE. Heat sources

• Water-baths: These are used when meltingointment bases or preparing suppositories

• Electric hot plates: Used for melting andheating and have the advantage ofthermostatic controls.

6/4/2017 BA-FP-JU-C

6/4/2017

11

SELECTION OF INGREDIENTS

• Reputable supplier.• Competitive prices.• Check on expiry dates.• Good storage conditions.• Variety of forms.• Synonyms.

6/4/2017 BA-FP-JU-C

SELECTION OF INGREDIENTS

• Variety of forms:

6/4/2017 BA-FP-JU-C

6/4/2017

12

Selection of ingredients• Synonyms:

BA-FP-JU-C

SELECTION OF INGREDIENTS

Concentrated waters

•Liquid preparations for oral use are often flavored tomake them more palatable for the patient.

•In extemporaneously prepared products the flavoringis frequently a flavored water, e.g. peppermint water,aniseed water.

•All concentrated waters (10% v/v) have the same dilution factor to prepare single strength flavored water (0.25% v/v), i.e. 1 part of concentrate plus 39 parts of water to give 40 parts of flavored water.

6/4/2017 BA-FP-JU-C

6/4/2017

13

PROBLEM SOLVING INEXTEMPORANEOUS DISPENSING

• ‘Official’ preparations• The application of simple scientific knowledge; physical

properties.

• Solubility: are the ingredients soluble in the main vehicles,the particle size, are they present in a lumpy or granular form.If the substance is not soluble, a suspension or an emulsionwhere one material is an oil will be produced.

• Volatile ingredients• Viscosity: The following prescription is received:• Sodium Bicarbonate Ear Drops BP, Send 10 mL.• Formula:

Sodium bicarbonate 500 mgGlycerol 3 mLFreshly boiled and cooled water to 10 mL

• Expiry date.6/4/2017 BA-FP-JU-C

COUNTING DEVICES For Tablets and Capsules

Various methods can be used for this counting:

• The manual method.

• Counting triangle (for pills)

• Capsule counter.

• A perforated counting tray.

• An electronic counter: Electronic balances, Photoelectric

cell counters.

• medicines must not be touched by hand.

• The equipment should also be carefully cleaned before use.

6/4/2017 BA-FP-JU-C

6/4/2017

14

Counting triangle

6/4/2017 BA-FP-JU-C

http://iforg.com/blog/?p=17

Capsule counter

6/4/2017 BA-FP-JU-C

6/4/2017

15

Perforated Counting Tray

6/4/2017 BA-FP-JU-C

http://www.adelphi-coldstream.uk.com/products/pharmacyl-dispensing-equipment/tablet-capsule-

counters/tumatic-capsule-counter.html

Key Points

• Extemporaneous dispensing should only be

used when manufactured medicines are not

available.

• Accurate dispensing requires clean, neat

methodical work.

• Comprehensive records of extemporaneous

dispensing are required to be kept for at least

2 years.

• Electronic balances are increasingly being used

in extemporaneous dispensing.6/4/2017 BA-FP-JU-C

6/4/2017

16

Key Points• Do not use a balance to weigh less than its

minimum weighable quantity.

• Ensure that liquid measures comply with the Weights and Measures Regulations.

• Always use the bottom of the meniscus when measuring liquids.

• Viscous liquids should be measured ‘by difference’.

• Pipettes are used to measure volumes between 0.1 mL and 5 mL.

6/4/2017 BA-FP-JU-C

Key Points• Select the smallest measure for the volume of

liquid to be measured.

• A glass mortar and pestle can be used for size reduction of friable materials and mixing small quantities of fine powder.

• A porcelain mortar and pestle is used for larger quantities, for mixing solids and liquids, making emulsions and for size reduction.

• ’Doubling-up’ is used for mixing a small quantity of powder with a larger quantity.

6/4/2017 BA-FP-JU-C

6/4/2017

17

Key Points• Confusion can arise with different forms of the

same material and the use of synonyms.

• Concentrated waters are diluted 1 part with 39 parts of water for use as single strength.

• Simple problem-solving techniques can produce a satisfactory method of dispensing a product.

• Tablets and capsules can be counted manually, or by using a triangle, capsule counter, counting tray or an electronic counter.

• Tablets and capsules should not be counted in the hand.6/4/2017 BA-FP-JU-C