Directory of the French Wind Power Industry - enr.fr · PDF filethe contractors operating in...

Annuaire de l’industrie éolienne française

Directory of the French Wind Power Industry

2014

#1

FRENCH REGIONFOR WIND POWER IN TERMS OF INSTALLED CAPACITY

With its firm commitment to renewable energy, the Champagne-Ardenne region offers you:

growth potentials in France,

boilers or electronics,

CHAMPAGNE-ARDENNE: LEADING THE WAY IN WIND POWER

www.cr-champagne-ardenne.fr

WINDUSTRY FRANCETHE FRENCH WIND POWER INDUSTRY

2014 Directory

CONTENTSFOREWORDby Arnaud MONTEBOURG, Minister for Industrial Renewal ..................................................04

INTRODUCTION by Jean-Louis BAL, President of the Syndicat des énergies renouvelables

(French Renewable Energy Association) ..........................................................................06

THE WIND POWER INDUSTRY VALUE CHAIN ..................................................08

DIAGRAM OF THE VALUE CHAIN .........................................................................10

LIST OF FIELDS OF SPECIALTY ............................................................................12

MAP OF FRANCE WIND FARMS...........................................................................16

PARTNERS OF THE WINDUSTRY FRANCE PROJECT ......................................19

BUSINESSES SELECTED TO BE PART OF THE WINDUSTRY FRANCE PROJECT ....................................................................................................................35

TRAINING CENTRES FOR WIND TURBINE MAINTENANCE TECHNICIANS ...........................................................................................................51

WIND TURBINE MANUFACTURERS .....................................................................57

WIND TURBINE INSTALLATION DEVELOPERS AND OPERATORS ................75

WIND POWER INDUSTRY SUPPLIERS AND SUBCONTRACTORS .............129

INDEXAlphabetical .............................................................................................................381

By speciality ..............................................................................................................386

By region ..................................................................................................................392

Advertisers ................................................................................................................400

Published by the SER, February 2014 – Design/Production: [email protected] – English Translation: ITC Traductions - Editor’s note: The information published in this directory was provided by the companies. It in no way engages the responsibility of the Syndicat des Energies Renouvelables who cannot be held responsible for the contents of the businesses’ pages - Photo credits: cover (left to right): © AREVA, © WeserWind/Matthias Iberler, © ENERTRAG, © AREVA - p 10, 11 (left to right) : © Benoît SEVENO, © B. MENTREL (photos 2, 3), © DR, © SER/ENERCON, © La Compagnie du Vent/Djamel DINE ZITOUT.

FOREWORD

WINDUSTRY FRANCEis a government-backed industry initiative aiming to help French businesses succeed in the wind power industry

In the first edition of this directory, 140 companies operating in France were identified as active

subcontractors in the French wind power industry. As part of its efforts to reindustrialise the country,

the Ministry for Industrial Renewal decided to found Windustry France, as a way of supporting

the sector’s small and mid-sized businesses. The initiative aims to showcase French expertise

and how it can be transposed to both the onshore and offshore wind energy industries. At the

very core of the “made in France” campaign, the companies identified by the Windustry France

initiative operate at all stages of the value chain, from parts manufacture (masts, generators,

brakes, blade orientation systems, yaw drives, electrical components, power electronics, etc.) to

related activities such as site development, power grid connection, civil works, and the transport,

assembly and storage of wind turbine parts. The Windustry France directory of skills and expertise

in wind power production now features over 250 companies from France’s industrial base.

Windustry France also has a programme to provide individual assistance and support so that

companies seeking to break into new markets can diversify into the wind power industry. Led by

the Syndicat des Energies Renouvelables (France’s Renewable Energy Association), Windustry

France is a strategic reindustrialisation tool which, with the support of the Ministry for Industrial

Renewal, can help businesses that have historically been active in the energy, automotive, rail,

naval, and aviation sectors.

Industrial renewal is a vital issue for France, requiring the commitment of both the State and

all the country’s economic forces, whatever their field of operation. It is to be achieved through

thirty-four industry programmes, one of which is entirely dedicated to renewable energy.

4 WINDUSTRY FRANCE - THE FRENCH WIND POWER INDUSTRY 2014

With transition to new energy sources on the horizon, France must build an industrial base that

will ensure independence for both its energy supply and its economy. Windustry France will help

achieve this objective as well as helping businesses in the wind power sector keep their promise

of creating 50,000 new jobs by 2020.

Arnaud MONTEBOURG

Minister for Industrial Renewal

© M

inis

tère

du

Re

dre

sse

me

nt P

rod

uc

tif

5WINDUSTRY FRANCE - THE FRENCH WIND POWER INDUSTRY 2014

INTRODUCTION

WINDUSTRY FRANCEand the 2014 French Wind Power Industry Directory

THE FRENCH GOVERNMENT HAS ENTRUSTED THE COUNTRY’S WIND POWER INDUSTRY, AS

REPRESENTED BY THE SYNDICAT DES ENERGIES RENOUVELABLES (SER - FRENCH RENEWABLE

ENERGY ASSOCIATION), WITH THE MANAGEMENT OF ITS OWN INDUSTRIAL RESTRUCTURING

PROGRAMME, WINDUSTRY FRANCE, INCLUDING USING THE PUBLIC FUNDS IT HAS RECEIVED

AS EFFICIENTLY AS POSSIBLE, TO EXPAND ACTIVITY IN THIS PROMISING NEW FIELD.

The programme focuses on providing customised support and guidance to businesses, in order to

help them develop new industrial processes so as to win contracts from wind power contractors,

thus diversifying their activity and creating new jobs. The goal of the programme is to provide

assistance to at least 50 businesses: 20 in 2013 and 30 more in 2014. Beneficiaries of the

programme are selected by contractors in the wind power industry, who are the programme’s

partners and members of its steering committee. Assistance begins with an audit of a company’s

industrial plant by a wind power expert, who will make a list of recommendations that the

company will have to follow if it is to satisfy purchasers. The next stage of support is provided

by a technological expert, who advises the company on the investments it will need to make in

order to fulfil the recommendations of the wind power expert.

The Windustry France directory complements this individual support programme by mapping

the French wind power industry. It is intended to provide an overview of all the players involved

in the industry, on the one hand showcasing what French manufacturers have to offer (such as

electrical and mechanical parts, and industrial and technical services), and, on the other, listing

the contractors operating in the wind power industry - wind turbine manufacturers, power plant

developers and operators, etc., on whose strategic choices will depend the ability of French

subcontractors to develop their business.


The 2014 edition of the directory also includes other types of player, including Windustry France’s

regional partners (e.g. Chambers of Commerce, clusters, and development agencies), who take

the activities conducted by the Syndicat des Energies Renouvelables and players in the wind

power sector to the regions, and training centres for wind turbine maintenance technicians, who

will represent a significant proportion of the jobs created by the development of the wind power

industry in France.

Jean-Louis BAL

President of the Syndicat des énergies renouvelables



VALUE CHAIN

THE WIND POWER INDUSTRY VALUE CHAIN

© A

reva

> ONSHORE WIND ENERGYAltogether, France’s onshore wind farms have a total capacity of over 8,000 MW. A wind turbine

consists of a number of sophisticated sub-assemblies that transform the wind’s mechanical energy

into electricity. A wind turbine generally comprises the following components:

• a rotor comprising three blades and a hub

• a nacelle consisting of a frame, gearbox, generator, and a shell made of composite materials

• a tower consisting of a mast, electric converters, a transformer, and a control system.

Today, onshore wind turbines have multi-megawatt power ratings ranging from 2 to 3 MW on average,

but a few particular machines have even greater capacity.

> OFFSHORE WIND ENERGYFrance has Europe’s second highest potential for offshore wind energy and has set a goal of

installing 6,000 MW off its coasts by 2020. One of the main differences between onshore and

offshore wind turbines lies in the latter’s foundations, which are based on the same technology as

is used for oil rigs. Installing wind farms offshore enables to increase generator capacity. Currently,

turbines are available with capacities of 5 to 6 MW, and turbines with up to 8 to 10 MW of power

are under development.

> DOMESTIC WIND POWERSmall or domestic wind power is used by private individuals who install a turbine in their garden.

Domestic wind turbines have capacities of less than 36 kW, range from 10 to 35 m high, and have a

total diameter of 2 to 10 m. These installations are especially useful when combined with photovoltaic

and energy storage devices to supply power to isolated areas not connected to a power grid.


DIAGRAM

DIAGRAM OF THE VALUE CHAIN

ROAD CONSTRUCTIONSPECIAL TRANSPORT

Smelted parts

Masts and bases

Nacelles

Blades

Flanges and slewing rings

Electrical materials and equipment

Mechanical parts

Brakes

WIND TURBINE ASSEMBLYOnshore - Domestic wind power - Offshore

PROJECT DEVELOPMENTWind studies - Environmental studies -

Technical surveys etc.

PARTS MANUFACTURE


ASSEMBLY

COMMISSIONING

GRID CONNECTION

OPERATION AND MAINTENANCE

THIS DIAGRAM SHOWS THE VARIOUS STAGES OF THE WIND FARM VALUE CHAIN, FROM

PROJECT DEVELOPMENT TO MANUFACTURE OF WIND TURBINE PARTS, AND COMMISSIONING

AND OPERATION OF THE INSTALLATION.

Geotechnical surveys

Foundations and earthworks

Electrical engineering

SITE PREPARATION


Contractors

WIND FARM DEVELOPERSThe development of a wind farm project starts with the identification of a potential

site, discussions with local communities and landowners, environmental studies, and

obtaining administrative authorisation. This is followed by site preparation, supply and assembly of

the wind turbines, connection to the power grid, and commissioning.

WIND TURBINE MANUFACTURERSThere are several types of wind turbine manufacturers. Some are merely integrators,

while others prefer to be in charge of the production of certain key components. Still

others handle all aspects of turbine manufacture, right from the design stage to the manufacture

of almost every part, and final assembly.

WIND FARM OPERATORSThe operator comes into the picture when the wind turbine is ready to be commissioned.

The operator is the producer of the electricity that is injected into the power grid. Operators

oversee and maintain the wind turbines, either using their own teams or external service providers.

Parts Manufacture

BLADESThe average blade on a modern wind turbine is 30 to 80 metres long. Its shaping closely

resembles that of an aeroplane wing or a ship’s hull.

FIELDS

22 FIELDS OF SPECIALTYTECHNICAL SURVEYS, DESIGN OF MECHANICAL AND ELECTRONIC ELEMENTS, MANUFACTURE OF

STEEL AND COMPOSITE PARTS, CIVIL WORKS, ELECTRICAL ENGINEERING AND MAINTENANCE–

THE WIND POWER INDUSTRY EMBRACES A VARIETY OF TRADES.


NACELLESThe nacelle is the compartment housing the parts at the top of the wind turbine. It is

normally made of composite materials. The process for making the nacelle and the nose

cone is the same as for a blade, although nacelles do not require the same level of precision or

strength. Nacelles are usually made up of multiple sections.

CAST PARTSThe processes for making the nacelle frame and hub are the same: they are both large,

smelted, machined parts. The framework for a 2 MW turbine generally consists of two

or three pieces that can weigh up to 4,500 kg each.

FLANGES AND SLEWING RINGSA slewing ring transfers force from a turning part of a mechanism to a fixed part. In the

case of a wind turbine, slewing devices allow the rotor and blades to change direction

depending on the direction and force of the wind.

ELECTRICAL MATERIALS AND COMPONENTSComponents are assembled and integrated into various subassemblies throughout

the wind turbine, including the generator, power converters, motor reducers, wiring,

transformers, and control systems.

BRAKESIf necessary, especially when wind speed is too high, disc brakes can be used to stop

the wind turbine in no more than a few rotations. The system allows the turbine to brake

gently without putting too much strain or fatigue on the tower or mechanical elements.

MECHANICAL PARTSPower transmission is one of the keys to a wind turbine’s output and capacity. An array of

mechanical and hydraulic parts transmits the wind’s kinetic energy to a gearbox, which

transfers the rotating movement at more than a thousand rotations per minute to the generator,

which converts the energy to electricity.

MASTSWind turbine masts are made of steel or reinforced-concrete conical tubes. Modern towers

range from 65 to 140 m in height. The base of the mast can be over 5 m in diameter,


but the mast becomes narrower towards the top, usually reaching about 3 m in diameter. Towers

usually come in three or four sections.

Site Preparation

GEOTECHNICAL SURVEYSBefore a wind turbine is assembled, geotechnical surveys are conducted to inspect the

subsoil structure and determine the necessary size of the foundations. Such surveys

include taking soil samples and analysing them in a laboratory.

WIND MEASUREMENTSWind measurements are taken before building a wind farm, in order to measure the

quality of the wind on site and determine the best position for the turbine. Turbines are

also equipped with wind measurement devices to help determine the direction of the rotor and

blades, so that the turbine always produces a maximum amount of energy.

ELECTRICAL ENGINEERINGCompanies specialising in electricity transport and distribution systems are involved

early in the project, to find the best technical solution for evacuating energy produced

to the power grid. They provide electrical equipment that is integrated into city gate stations, as well

as cables to link wind turbines together. They also work at construction sites to install underground

cables and build city gate stations and connections.

FOUNDATIONS AND EARTHWORKSSafe access to the site must be provided so that the wind turbines can be delivered

and assembled. Roads must be widened and sometimes reinforced. Earthwork and

foundation-building services are generally performed by local companies specialising in civil

engineering and road-building.

EXPERT ASSESSMENTSEngineering offices specialising in the wind power industry assist developers throughout

a project, conducting the necessary expert evaluations, such as assessment of the total

arising, structural calculations, and modelling of electrical installations, etc.


INSPECTION OFFICESInspection offices are authorised to help both the initial contractor and the companies

contracted to provide the services required. They check to ensure that wind turbine

installations comply with prevailing regulations, from dimensioning through to construction and

operation.

Commissioning

SPECIAL TRANSPORT, LOGISTICS, HANDLING, AND HOISTINGEach wind turbine is transported in several pieces, most of which require special transport.

Ocean or river transport is preferred. The pieces are then taken the rest of the way by

lorry to the installation site.

AIRCRAFT WARNING LIGHTSAs a safety measure, wind turbines must be marked and visible from the air. Current

technology uses powerful LED lights, with all the lights on a single wind farm blinking

simultaneously.

ASSEMBLY AND MAINTENANCEThe process for unloading and assembling wind turbine parts requires two cranes: one

very high capacity crane (at least 800 tonnes and a minimum 100 m boom) and a

medium-capacity crane (about 120 tonnes) that can turn parts around, for example, from a horizontal

position to a vertical one or vice versa.

Wind turbine maintenance requires skills in mechanics and electrical engineering, as well as

familiarity with IT tools and the ability to work at great heights.

OFFSHOREThe expertise required to build offshore wind turbines is similar to that needed for building

offshore oil rigs. The skills of the shipbuilding and maritime industries are indispensable

when constructing or maintaining offshore wind farms.

DOMESTIC WIND POWERSmall wind turbines are often manufactured by smaller businesses and sold locally. Designers

come up with all sorts of ideas for creating silent, pleasant-looking machines that can work

with a wide range of wind speeds, in their attempts to satisfy the requirements of private individuals.


MAP OF FRANCE

MAP OF FRANCE WIND FARMS

� � � � � � � � �

� � � � � � � � � �

��

��

�� !��"��#"�$��#"�$��##"�$�� "�"�$

��

��

�%��"��%��%��%"��"��%" �%"��%��

��&��

��

!�"#

$!�"#

$%�"#

&%�"# & !�"#

��(��)*+,�-

./012�-3410/452

26.7

�� "�"�� 9999999�999998+�-

2*�-3,*/211

��:��&�� :�� &�� :��"�:��"�.�-

,�-3*11

�"��"�� .4�-

,5�-3../511

��:��$��$$.�-

,�-3+11

;��"�;�� ,2�-

0*�-3.5/111

��

&!!! �

'!! �

(!! �

$!! �

&!!��

%! �

! �

%�

!�

��

�)�*+,-�*.��/*,/��,� &0&$0$!&

��12#�2.� .3 ,4/ 5+��/�/6�- )6.�7*2.� +� $!&

��12#�2.� .3 ,4/ ).)7��2.�17))�+/� 8- 5+�� /�/6�-/�/*,6+*+,- +� $!&

��9/6��/ *.9/6��/ .3 ,4/,.,�� *.�17#)2.� 8-5+�� /�/6�- +� $!&

&/��5�: �� ; &<!!! "+�.5�:1 �"��& /��5�:4.76 ��4� ; &<!!! "+�.5�:4.76 �"�4�

�==��=��

��6/�1 .3 ,4/ >61, 6.7��.*�2.� +� $!&$�

��6/�1 .3 ,4/ 1/*.�� 6.7��.*�2.� +� $!&(�

� � � � � � � � � � � � � �

� � � � � � �

%'��#;

"��

��';"��

��&��&��&&��&

�#��#��#��#��#

��"��"��"��

��

��<"�"��="��=��

��>"��?��

��

��

"��)"��)��#"��%�� #�� #�#

��#"?��#"?��

"��"��"��"��"��"�"��;��"��"�"��

��

�"��@

��

;�?�� 3�#;�?�� 3�#;� ��"�� 3A�"� 3A�"� 3A�"3A�" 3A�""�� ?�??

��"��<�<��<��"�

��'��

��

$�$��&"�$&"�$$

"�#'�

��

��

��

��

��

��

��

��

��

��

!�"# %! &!! &%!�"#

�:��:��

&�)�&�)�)��"��"� �"��"��""��)� �"484�-

5+8�-3845/84.

,687

B;;;��"�#��)�"�#��);,05�-

4.4�-3,11/000

,6*7

&��)&��)./.02�-

,/.02�-3+42/15.

.06,7

�� %��%�� 8.�-

21�-3,5/8,1

16.7

"��&�� "481�-

./1+5�-3414/*2+

,657

�� 3�#;�3�#;�?��?��;� ��./,+8�-

,/04.�-352./*00

,,687

�"��*.5�-

./,,4�-30+5/,4,

4627

�� *+.�-

./052�-3412/1+4

*627

��))��?��)��?��?��).41�-

,8,�-3+2/58,

.657

�C��C��?��C��?��CC��?��.++�-

804�-3.8./4,2

8607

�� "#�' ""#�'��3�%%�� 81�-

��3D��;�� 3D��;��3D��;��3D�� .25�-

855�-3.2,/2,5

16*7

&"��"��"�� 3��"�� 8,4�-

2.+�-3,1*/82,

0647 �#"��#"��04�-

*2�-3

,+/,12.647

��&)�'�'��&)�'�'�� &)�'�'��01.�-

+5*�-38,,/02*

0607

�"��"��"��"��"��"��"��?��"��?� �?��?��"��0*5�-

./,52�-300+/2*1

*607

��;�&�"C��;�� D�� D�� & ��D�� D�� &�"C��;�� D�� 04�-

..2�-38+/+.,

1607

))�"9��"�#��)� ��"�#��)�"9� ),,*�-

040�-3.05/,+2

0617

"��.+�-

,.�-3*/10.1657

�� .,�-

�.76*/1?��.6�#��.3�6/�/5�8�/�/�/6�-�+��$!& ��<��<��=<��/=�@��/12#�,/1

© TH

INK

UP

PARTNERS OF THE WINDUSTRY FRANCE PROJECT

Get spotted !We would like to thank the advertisers and SER without whom this directory would not have been possible

Advertising space sales and editing agency

� CONTACT US16, rue Chevreul - 75011 Paris - FRANCETél. : + 33 (0)1 43 70 98 88Fax : + 33 (0)1 43 70 49 41Mail : [email protected]

CREA

TIFS

AGAG

ES.C

OM

BUSI

NES

SES

SELE

CTE

DTR

AIN

ING

CEN

TRES

MA

NU

FAC

TUR

ERS

DEV

ELO

PER

S/O

PER

ATO

RS

SUPP

LIER

S


PAR

TNER

S

B

BRETAGNE DEVELOPPEMENT INNOVATIONBretagne Développement Innovation (BDI) is Bretagne’s regional development and

innovation agency.

1 bis route de Fougères, 35510 Cesson-Sévigné+33 (0)2 99 84 53 00 + 33 (0)2 99 84 01 20

www.invest-in-bretagne.org/energies-marines [email protected]

ORGANIZATION

As a interactive hub overseeing Bretagne’s economic activities, Bretagne Développement Innovation operates across three main areas:• Providing greater structure to the region’s core industries (marine energy, shipbuilding, pleasure boating, ICT, energy, materials, vehicles and mobility...)• Fostering innovation in business• Driving the region’s inward invest and branding strategy

ACTIVITIES

As part of its MRE sector strategy and with backing from Bretagne Regional Council, BDI is leading the development of Bretagne’s MRE sector and is responsible for promoting it. This involves the agency overseeing business support organisations, especially for offshore wind. BDI’s partners are Pôle Mer Bretagne, Bretagne Pôle Naval, Bretagne Commerce International, the regional Chambers of Commerce network, Université Européenne de Bretagne, and the businesses associated with current projects.Bretagne does feature some strong assets: ability to conduct consultations, high potential in offshore technologies (fixed and floating wind, wave, tidal and tidal stream); a network of capable, diverse, MRE-related SME’s, core industrial partners in position, effective university and life-long learning provision, and the largest concentration of technical and marine sciences in France. Above all, Bretagne has the political will to seize this opportunity.

LOCATIONS

Head office in Rennes, and offices in Brest.

BUSI

NES

SES

SELE

CTE

DTR

AIN

ING

CEN

TRES

MA

NU

FAC

TUR

ERS

DEV

ELO

PER

S/O

PER

ATO

RS

SUPP

LIER

S


PAR

TNER

S

B

BRETAGNE POLE NAVALIndustry Cluster

3 rue Marie Dorval, 56100 Lorient+33 (0)9 83 71 30 44 +33 (0)2 97 02 40 58

www.bretagnepolenaval.org [email protected]

ORGANIZATION

BPN is an industry cluster uniting over 125 businesses in the Brittany region of France. BPN is comprised of three sectors of excellence: Marine Renewable Energy (MRE), Naval, and Offshore Oil and Gas.

ACTIVITIES

90 companies with proven technical skills organised by working group are the pillars of the BPN MRE cluster. From design right through to maintenance, the entire value chain in the Marine Renewable Energy sector is represented within the MRE Cluster. With expertise acquired in the naval sector, the industrial players specialize in five technologies: tidal energy, bottom-fixed offshore wind turbines, floating offshore wind turbines, wave energy, and ocean thermal energy. The development of the MRE sector is a major issue for all Breton businesses, and they are committed to promoting an excellence initiative to the benefit of the advancement of Marine Renewable Energy.

LOCATIONS

BRITTANY is on the forefront of MARINE RENEWABLE ENERGY development.

BUSI

NES

SES

SELE

CTE

DTR

AIN

ING

CEN

TRES

MA

NU

FAC

TUR

ERS

DEV

ELO

PER

S/O

PER

ATO

RS

SUPP

LIER

S


PAR

TNER

S

X

BUSI

NES

SES

SELE

CTE

DTR

AIN

ING

CEN

TRES

MA

NU

FAC

TUR

ERS

DEV

ELO

PER

S/O

PER

ATO

RS

SUPP

LIER

S


PAR

TNER

S

C

CCI LITTORAL NORMAND-PICARDFrance’s first business incubator dedicated to renewable energy and energy

managementg

20 rue du Chevalier de la Barre, 80142 Abbeville cedex +33 (0)6 86 66 67 43 www.littoral-normand-picard.cci.fr [email protected]

ORGANIZATION

An interregional player involved in structuring the wind power economic sector: Led by a wind power professional and with the support of local authorities in Normandy and Picardy, the Chamber of Commerce and Industry for the Normandy-Picardy coastal region opened the first business incubator entirely dedicated to renewable energy in September 2009. The incubator is recognised both for hosting and assisting businesses, particularly in various aspects of the wind power sector, and for its contributions to the development of industrial diversification in onshore and offshore wind power and hydro-kinetic power.

ACTIVITIES

Housing and assistance to businesses:The group offers offices (20 to 45 m2 in size) and office/workshop units (230 to 365 m2 in size) with specialised assistance from renewable energy experts.The Oust-Marest renewable energy incubator is already home to:• A maintenance base for onshore wind farms (Enercon Service)• The head office and a regional office of a developer/operator of onshore wind farms (Energie Team)• A logistics company for offshore wind energy (STO Logistique).Industrial diversification into wind and hydro-kinetic power:• Co-organisation of a variety of events:4 May 2010: the first “Windustry France” interregional convention for companies at the Renewable Energy Incubator8 December 2011: the first “Windustry France” business convention in Amiens1 and 2 October 2013: Third “Windustry France” business convention in Le Havre• Organisation on behalf of the regional network of economic players in Normandy of the initiative to mobilise industrial companies for offshore wind farms through the “Vigie-Business-Éolien Offshore” online platform (1,100 business members in the Grand Ouest area of France)• Organisation of business events with major prime contractors (EDF EN, GDF SUEZ, Areva, Alstom, Siemens, etc.) at the Renewable Energy Incubator and in various Chambers of Commerce and Industry in the Grand Ouest region (Le Havre, Fécamp, Caen, Cherbourg, Brest, etc.)• Along with the Picardy Conseil Régional, organisation of a regional industry diversification initiative for large wind turbines and a business club for the sector.

LOCATIONS

Upper Normandy, Picardy.

BUSI

NES

SES

SELE

CTE

DTR

AIN

ING

CEN

TRES

MA

NU

FAC

TUR

ERS

DEV

ELO

PER

S/O

PER

ATO

RS

SUPP

LIER

S


PAR

TNER

S

D

DUNKERQUE PROMOTIONEconomic Developement Agency

Bâtiment le Remorquage, 2508 route de l’écluse Trystram, 59140 Dunkerque+33 (0)3 28 22 64 40 +33 (0)3 28 22 64 41

www.dunkerquepromotion.org [email protected]

ORGANIZATION

Economic Developement Agency, Dunkerque Promotion is the regional pilot of Windustry Nord Pas de Calais and is in charge of the animation of the cluster and promotion of the industrial & logistics expertise in the field of wind turbine.

ACTIVITIES

More than 80 companies are involved in the cluster, you will find a profile of each one on our website : http://www.dunkerquepromotion.org/contents/files/GUIDEversionfinale.pdf

LOCATIONS

Logistics : operations and maintenance ports, but also industrial and assembly ports in Boulogne-sur-Mer & Dunkerque.

BUSI

NES

SES

SELE

CTE

DTR

AIN

ING

CEN

TRES

MA

NU

FAC

TUR

ERS

DEV

ELO

PER

S/O

PER

ATO

RS

SUPP

LIER

S


PAR

TNER

S

E

EOLISSIMA CCI DE REGION NORD DE FRANCE-

Providing help to the SME of the North of France to reach wind energy markets

299 boulevard de Leeds CS 90028, 59031 Lille cedex+33 (0)3 20 63 68 00 +33 (0)3 20 13 02 00

www.nordpasdecalais.cci.fr [email protected]

ORGANIZATION

French Chambers of Commerce are public bodies headed by elected business representatives, and dedicated to the promotion and defense of business interests to the public authorities. They participate in the local development of businesses, the planning of an attractive business environment and offer a wide range of services to its members.

ACTIVITIES

• Communication around Nord of France’s industrial potential • Business information through workshops and eolissima.fr website• Audit and support • All these actions are related to Windustry Nord-Pas de Calais.

LOCATIONS

Nord-Pas de Calais region.

BUSI

NES

SES

SELE

CTE

DTR

AIN

ING

CEN

TRES

MA

NU

FAC

TUR

ERS

DEV

ELO

PER

S/O

PER

ATO

RS

SUPP

LIER

S


PAR

TNER

S

L

LE MANS WIND CLUSTERBusiness, training, and R&D cluster for the wind power sector in Le Mans and Sarthe

75 boulevard Oyon, 72000 Le Mans Wind Cluster+33 (0)2 43 57 72 24 +33 (0)2 43 57 72 30http://reseaulia.com/space/le-mans-wind-cluster

[email protected]

ORGANIZATION

The Le Mans Wind Cluster is a group of private and institutional stakeholders led by Le Mans Développement. The cluster has three sectors: the business sector (focusing mainly on the maintenance of installations), the R&D sector and the training sector.

ACTIVITIES

• Business sector: Represented by Le Mans Développement, the business sector brings together local businesses that wish to invest in wind power, promotes businesses, and facilitates access to calls for tender from major prime contractors (such as Maser, Chastagner, Fimor, and Net-Wind).• Training sector: Represented by GRETA and certified by BZEE, training targets is provided for holders of the Baccalauréat and plays an active role in the structuring of an integrated wind power sector in our region. The only offshore maintenance training program in France.• R&D sector: The R&D sector is led by the Université du Mans Acoustic Laboratory (LAUM - CNRS) together with the Institut Supérieur des Matériaux et Mécaniques Avancées (ISMANS), the Ecole Nationale Supérieure d’Ingénieurs du Mans (ENSIM), and the Centre de Transfert de Technologie du Mans (CTTM). These research centres are a testimony to our region’s dynamism and work to develop innovations in acoustics, composite materials, on-board systems, and mechanical engineering.

LOCATIONS

The Le Mans Wind Cluster unites players from the greater Le Mans area and the French département of Sarthe. The Le Mans Wind Cluster also acts as a local representative for Néopolia, the Adéo Association, and the Syndicat des Énergies Renouvelables (SER).

BUSI

NES

SES

SELE

CTE

DTR

AIN

ING

CEN

TRES

MA

NU

FAC

TUR

ERS

DEV

ELO

PER

S/O

PER

ATO

RS

SUPP

LIER

S


PAR

TNER

S

N

NEOPOLIA EMRMRE Business Cluster

35 avenue du Général de Gaulle, 44600 Saint-Nazaire +33 (0)2 40 17 21 52+33 (0)2 40 17 21 45 www.emr.neopolia.fr [email protected]

ORGANIZATION

Neopolia is a network of 180 industrial companies in the Pays de la Loire region. Its 5 business clusters (marine, oil and gas, aerospace, rail, and MRE) are concrete evidence of its market focus. They reflect the willingness of the participating businesses to unite around a shared strategy and a common industrial offering to conquer new markets both in France and abroad.

ACTIVITIES

Néopolia MRE brings together over 85 companies who pool their knowledge and work together to respond innovatively to the needs of the MRE market. A steering committee composed of 12 directors determines the MRE cluster’s strategic and commercial goals. The organisation in 8 Strategic Business Units means companies can be grouped according to expertise to facilitate the development of partnerships and help break into MRE markets.Each of the 85 companies falls into one or more of the eight SBUs:1) Land infrastructure2) Industrial processes and equipment3) Logistics and the supply chain4) Primary and secondary steel5) Integrated systems6) Complex turbine assemblies7) Operation and maintenance8) Service vesselsEach SBU includes one steering company and a cluster of companies. The cluster of companies in each SBU focus on three specific areas: • Creating B2B partnerships with the major players in the market in order to identify and determine market needs• Co-construction of the strategic positioning of the companies• Individual or collective responses or co-development projects.Our added value is based on: • A single point of contact to access an entire network of industry expertise• Optimisation of your supply chain• Assistance for co-development projects to increase competitiveness• Transfer of the best technological solutions from the multi-market expertise of the companies.

LOCATIONS

Pays de la Loire.

BUSI

NES

SES

SELE

CTE

DTR

AIN

ING

CEN

TRES

MA

NU

FAC

TUR

ERS

DEV

ELO

PER

S/O

PER

ATO

RS

SUPP

LIER

S


PAR

TNER

S

O

ONEM (Ouest Normandie Energie Marine) Develop and manage marine renewable energy in Lower Normandy

3 rue René Cassin, 14280 Saint-Contest +33 (0)2 61 45 17 30 www.west-normandy-marine-energy.fr

ORGANIZATION

SPL Public CompanyManaging Director: F.Piquet

ACTIVITIES

Lower Nromandy is the territory of the marine renewable energy, and there are few project in devellopement • a project of manufacturing unit in Cherbourg• a commercial farm of wind turbine in Coruseule sur mer • a Tidal Farm project in Raz Blanchard where share approach with wind farm will be essential.Created in 2012 ONEM is supported by:• The Regional Council of lower Normandy• The County Council of La Manche• The Town of CherbourgOnem is the focal point for the deferent state body, the european committee, local actor involved in the different area of R&D, Training & education & industrial devellopement.ONEM main action are:• to develop & manage link with key industrial player in local MRE project• to manage external relation, the communication and local & international cooperation around the different local project.• to organise and coordonate relation between State and major industrial companies • to facillitate setling down of companie in Cherbourg on the area dedicated by Port Normand Authority and more globally in Lower Normandy• to promote project tp build up MRE skills and Knowledge to support Off shore WInd project • to contribute to project acceptability (population & Environmental)

LOCATIONS

North west Suburb of Caen.

BUSI

NES

SES

SELE

CTE

DTR

AIN

ING

CEN

TRES

MA

NU

FAC

TUR

ERS

DEV

ELO

PER

S/O

PER

ATO

RS

SUPP

LIER

S


PAR

TNER

S

P

PICARDY - SOMME WIND POWER NETWORK

Conseil régional de Picardie - Lucas Toussaint 03 22 97 38 [email protected] www.picardie.fr

Conseil général de la Somme - Thomas Hutin 03 22 71 82 [email protected] www.somme-ecoactivites.fr

ORGANIZATION

Picardie is one of the first onshore wind region of France, with 1.83 TWh of electricity produced in 2012 and is also involved in offshore wind power development. Our regional plan for wind development targets 2,800 MW by 2020.According to these assets, the region Picardie and the county of Somme support the development of eco-activities and structure the wind energy’s field in connection with wind power industries, research teams and public institutions.

ACTIVITIES

A wind power industry which strengthens:

• Professionals of the wind power are highly mobilized, and strengthen their presence in the region: Enercon, H2AIR, Maïa Eolis, Valorem, Energie Team, … ;• A large panel of subcontractors in any steps of your project ; engineering offices, public works companies, electricians, manufacturers for electrics, hydraulics and mechanicals products, specialists of transport and lifting; • Particular welcome for Green business (renewable energy business incubator, public subsidy for renting buildings, estate Investments);• Pioneering public stakeholders (First 100% public wind farm in Montdidier);• A strong public support in favour of wind power;• WindLab: a plateform dedicated to the wind turbine technicians training programme certified by the BZEE.A network of skills and know-how:

• High industrials skills: several renowned companies in aeronautic, composites, hydraulics and mechanics, also supplies the wind industry (Scott Bader, Nexans, Hempel, Enercon, Nof Metal Coating, Duff Norton, …)• High Research & Development capacities on wind turbines: Technical & technology transfer centers, French National Institute for the Industrial Environment and Hazards, research laboratories involved in wind energy project (University, Engineering Schools …). http://www.picardie.fr/IMG/pdf/catalogue-r_i.pdf• IndustriLAB: the center of research, innovation, training and technology. IndustriLAB offers 5,000 m² of factory space and 2,500 m² of office space at the Picardie airport, in an entirely secure building, including confidential areas with controlled access. IndustriLAB relies on its network of partners (universities, technical centers, industries) to mobilize the skills and technical resources necessary to your project. http://www.industrilab.fr/Support for business: • Support for the potentials sub-contractors • Organization of meetings with contractors – sub-contractors, including the National Windustry meeting December 8th and 9th 2011 (more than 2,000 business meetings);• Promotion to the EWEA events • Support for setting up business, constructing and financing projects • Specific Greenfield and brownfield solutions for green business industries.

LOCATIONS

Picardy.

BUSI

NES

SES

SELE

CTE

DTR

AIN

ING

CEN

TRES

MA

NU

FAC

TUR

ERS

DEV

ELO

PER

S/O

PER

ATO

RS

SUPP

LIER

S


PAR

TNER

S

P

PÔLE MER MEDITERRANÉECompetitiveness cluster

229 chemin de la Farlède, 83500 La Seyne-sur-Mer+33 (0)4 94 03 89 03 +33 (0)4 94 03 89 15

www.polemermediterranee.com [email protected]

ORGANIZATION

The global marine economy has an annual turnover of $1.5 trillion. Of this, nearly $190 billion-worth of business did not exist ten years ago. The new activity includes marine and underwater mineral extraction, marine energy, algae-based biofuels, and aquaculture, etc. By 2020, these new fields are expected to generate nearly $450 billion in annual turnover. Since its creation in 2005, the Mer Méditerranée Cluster has opted to focus on sustainable development and maritime safety in six strategic fields: maritime safety and security, shipbuilding and sailing, energy resources and marine mining, marine biological resources, coastal development and environment, and ports, infrastructure, and maritime transport.

ACTIVITIES

One of the types of renewable energy currently under development is marine energy, which includes attractive technologies to respond to European energy development issues. Marine energy causes fewer disturbances to society due to the fact that equipment for it is installed out at sea. There are seven distinct types of marine energy: fixed-bottom and floating wind turbines; tidal and river turbines and sea-current energy, wave energy, marine thermal energy (SWAC, sea water heat pump, electricity production by ocean thermal energy), tidal power, biomass transformation, and osmotic pressure. The Pole Mer Méditerranée cluster runs a collaborative R&D program dedicated to marine renewable energy. The cluster is especially involved in the development of the floating offshore wind energy industrial sector. The Pole Mer Méditerranée cluster is a member of France Energies Marines.Key numbers: A sustained R&D program with more than 200 certified projects with a research and development budget of €564 billion. A 350-member network that includes 168 small and medium-sized businesses, 80 groups and large businesses, and 73 research and training organisations. The cluster was certified as an internationally-oriented competitiveness cluster in the Sea category by the CIADT committee on 12 July 2005.

LOCATIONS

Provence-Alpes-Côte d’Azur.

BUSI

NES

SES

SELE

CTE

DTR

AIN

ING

CEN

TRES

MA

NU

FAC

TUR

ERS

DEV

ELO

PER

S/O

PER

ATO

RS

SUPP

LIER

S


PAR

TNER

S

R

RÉGION CHAMPAGNE-ARDENNE Local authority and key partner in the economic development of the region

5 rue de Jéricho - CS 70441, 51037 Châlons-en-Champagne cedex+33 (0) 326 708 577 +33 (0) 326 708 899

www.cr-champagne-ardenne.fr [email protected]

ORGANIZATION

The goal of the policy adopted by the Champagne-Ardenne region is to boost the economic appeal of the region and create an environment conducive to the development of the companies. The region has developed tools adapted to the local conditions to sustain the regional economy, consolidate its quality business hosting environment, and run its Centres of Excellence, including the wind power sector. The region provides support to strategic projects and helps French and international investors relocate to the area.

ACTIVITIES

Since 2002, Champagne-Ardenne has been a popular area for the installation of wind turbines, thanks to its abundant wind resources and the vast open spaces available.With more than 1,264 MW of rated power, Champagne-Ardenne is now France’s leading region for wind power, with 60 wind farms and 629 wind turbines. Businesses specialising in wind power development will find huge growth potential (with a goal of 2,870 MW by 2020) and a favourable public policy formalised in a regional wind energy plan approved in 2012. Relocating companies will find competitive relocation costs, a strategic location in the heart of one of the most promising areas of France, and an emerging market in wind turbine maintenance and repowering. More than 50% of rated power in France is located within a radius of 300 km around Champagne-Ardenne and benefits from easy access to wind farms in the Benelux zone. Champagne-Ardenne will be one of the first regions concerned by repowering and thus by the development of an industry based around deconstructing and the management of components’ end-of-life. Many companies in Champagne-Ardenne are involved in subcontracting for the wind power industry and are able to produce the enormous, highly-complex equipment. This hotbed of companies offers great opportunities for European prime contractors to diversify their suppliers.Finally, training opportunities also meet current wind power industry needs with in particular since 2006, the first training course in France recognised by the profession and leading to the BZEE certificate.

LOCATIONS

Located in Châlons-en-Champagne, the Economic Development Department is available to wind farm developers, equipment manufacturers and maintenance companies in the wind power sector.

BUSI

NES

SES

SELE

CTE

DTR

AIN

ING

CEN

TRES

MA

NU

FAC

TUR

ERS

DEV

ELO

PER

S/O

PER

ATO

RS

SUPP

LIER

S


PAR

TNER

S

U

UBIFRANCE77 boulevard Saint-Jacques, 75014 Paris

+33 (0)1 40 73 32 70 +33 (0)1 40 73 30 27www.ubifrance.fr [email protected]

ORGANIZATION

UBIFRANCE, the French Agency for International Business Development, is an executive agency of the French government placed under the supervision of the Minister for Economic Affairs and Finance, the Minister with responsibility for Foreign Trade and the Directorate General of the Treasury.UBIFRANCE is the France’s export-support agency supported by a worldwide network.In France:

• International Chargés d’Affaires (ICA) based in the Regional Departments of Bpifrance• Regional Delegates based in the Regional Chambers of Commerce and Industry (CCI)• Business specialists: sectoral, legal, regulatory…Worldwide:

• 80 UBIFRANCE offices in 70 countries : also organised in sectors of activity, they are the gateways for French-based SMEs to export markets 1,400 multicultural UBIFRANCE staff worldwide, dedicated to assisting French-based SMEs in their export drive • Exclusive partners (CCIFE) in those countries in which UBIFRANCE does not have its own local office

BUSI

NES

SES

SELE

CTE

DTR

AIN

ING

CEN

TRES

MA

NU

FAC

TUR

ERS

DEV

ELO

PER

S/O

PER

ATO

RS

SUPP

LIER

S


PAR

TNER

S

W

WIND FOR FUTURE8 rue du 19 Mars 1962, 21600 Longvic +33 (0)3 80 39 43 65

www.windforfuture.com [email protected]

ORGANIZATION

Wind for Future (W4F) has 70 members, including over 50 wind power companies in Burgundy, Franche-Comté, and the Centre Est areas of France. The group was founded in September 2010 by companies who wanted to work together to promote themselves in France and abroad. It offers a wide range of subcontractors and partners in France working along the entire value chain, including: • Industrial manufacturers and processors of wind farm components of all sizes• Energy operation and wind farm management companies • Engineering, electrical connection, and building and public works companies involved in the installation of wind farms in Northeast France • Audit and consulting firms, engineering firms, and maintenance companies. Our mission is to: • Foster business development and help prime manufacturers to source cluster members • Promote the industry • Better exploit trades and expertise, innovation, and employee training needs • Develop collaborative programs and projects in France and abroad.W4F endorses the Windustry approach to encourage the emergence of the French wind power industry.

ACTIVITIES

The W4F cluster is a government-approved business cluster (DATAR) supported by the Burgundy region and by Europe (FEDER). W4F is a network consisting mostly of small to medium-sized businesses in a single region motivated by a common strategy of shared programs and services that define W4F. W4F was the only 100% wind power cluster to be selected. The operations team is composed of an executive officer and an innovation programme manager.Wind for Future is divided into four committees: innovation, training, attractiveness/promotion, and energy/climate/regions. • Communication tools: Own logo and identity; brochure with a list of all members; a website (www.windforfuture.com) detailing the cluster’s activities, history, members (with each member’s activities shown in a template and a link to the member’s website), upcoming programmes, innovative projects etc.; and a bimonthly newsletter• Training: With the help of the UIMM, the employment agency and the Burgundy Region, Wind For Future runs a training programme leading to a qualification where job-seekers can become wind farm maintenance technicians. Wind For Future also reinforces training in industry trades (welders, machining specialists, electrical mechanics) and adapts training to new trades (wind farm project managers, etc.). A training centre dedicated to initial training (BZEE certified) and ongoing training in onshore wind energy in Central and Eastern France is being built in Dijon• Innovation: Promote the setting up of innovative programmes. A dozen collaborative projects are currently being processed. Wind for Future works alongside the Spares in Motion platform to aid its development in France• Collective goals (Attractiveness/Promotion Committee): The second National Wind Power Symposium (18-19 October 2011 in Dijon), organised by the Syndicat des Énergies Renouvelables (SER) and by Wind Energy France (FEE), and the first wind power trades forum. Cluster members were grouped in the same hall. EWEA 2011 Brussels, 2012 Copenhagen, 2013 Vienna, 2014 Barcelona, overseeing the EWEA Offshore trade show in 2011 in Amsterdam and in Frankfurt in 2013. Presence of the cluster on a stand at Windustry business meetings (Amiens in 2011, Nantes in 2012, Le Havre in 2013)• Energy/Climate/Regions: Contributions to the Burgundy Regional Plan, with a goal of 1,500 MW by 2020.

LOCATIONS

Burgundy, Franche-Comté, and Center-East of France.

BUSINESSES SELECTED TO BE PART OF THE WINDUSTRY FRANCE PROJECT

PAR

TNER

STR

AIN

ING

CEN

TRES

MA

NU

FAC

TUR

ERS

DEV

ELO

PER

S/O

PER

ATO

RS

SUPP

LIER

S


BUSI

NES

SES

SELE

CTE

D

A

AETE ENERGIE Cathodic Protection

32 rue des Prunus, 76290 Fontaine La Mallet / Le Havre+33 (0)6 48 55 96 80 +33 (0)2 35 13 97 68www.aete-energie.fr [email protected]

ORGANIZATION

AETE ENERGIE is an integrator of cathodic protection solutions in the offshore sector (wind farms, marine and ports, and oil and gas).AETE ENERGIE offers environmentally-friendly cathodic protection systems.

ACTIVITIES

AETE ENERGIE is specialised in impressed current systems with MMO titanium anodes and protects submerged equipment internally and externally using a monitoring system.

LOCATIONS

AETE ENERGIE’s offices are located close to Le Havre, near to prime contractors.

PAR

TNER

STR

AIN

ING

CEN

TRES

MA

NU

FAC

TUR

ERS

DEV

ELO

PER

S/O

PER

ATO

RS

SUPP

LIER

S


BUSI

NES

SES

SELE

CTE

D

B

BESNÉ MÉCANIQUE DE PRÉCISIONManufacture of large mechanical parts - Design and manufacture of mechanical

systems (industrial processes).

ZA La Harrois, 44160 Besne+33 (0)2 40 17 33 30 +33 (0)2 40 17 33 31

www.elyps.fr [email protected]

ORGANIZATION

Besné Mécanique de Précision works in the following trades: design, mechanised welding, small- and large-capacity machining (up to 13,000 x 4,000 x 2,000 with 5-axis milling) and assembly (in-house or on-site).We work in the aviation, defence and energy sectors.

ACTIVITIES

Manufacture of mechanical parts.

LOCATIONS

Pays de la Loire.

PAR

TNER

STR

AIN

ING

CEN

TRES

MA

NU

FAC

TUR

ERS

DEV

ELO

PER

S/O

PER

ATO

RS

SUPP

LIER

S


BUSI

NES

SES

SELE

CTE

D

D

DIALOGIndustrial logistics - Construction support

Siège social : La Heuperie ; Ets principal : Vallée de Quincampoix, 5000050130 Saint-Lo ; Cherbourg Octeville

+33 (0)2 33 23 67 67 +33 (0)2 33 23 67 60www.dialogsas.com [email protected]

ORGANIZATION

DIALOG has 3 logistics platforms: Cherbourg, Mézidon-Canon Sotteville-lès-Rouen. Cherbourg has specific means of handling forklifts 16 and 28T, truck loader cranes, tractor capacity 250T. In terms of transportation, DIALOG has permissions 1st and 2nd category exceptional transports. The building of Cherbourg (10,000 m² covered. 35,000 m² site) is secure and heated. The interior of Cherbourg has a dedicated workshop in industrial packaging and containment area and a RCC-M (EDF certification). DIALOG is approved by the SEILA.

ACTIVITIES

DIALOG offers customers storage services, packaging, packaging and containment, handling and transport. We assist our principals in the assembly and pre-assembly equipment. Our staff is trained, warehousemen, stevedores, chief operating, truck drivers, elevated platforms, bridge operators slingers.... This staff has already intervened on industrial and nuclear sites.

LOCATIONS

Cherbourg Octeville (50130) - Sotteville-lès-Rouen (76) et Mézidon Canon (14).

PAR

TNER

STR

AIN

ING

CEN

TRES

MA

NU

FAC

TUR

ERS

DEV

ELO

PER

S/O

PER

ATO

RS

SUPP

LIER

S


BUSI

NES

SES

SELE

CTE

D

F

FERRY CAPITAIN SUBSIDIARY OF GROUPE CIF DE BUSSY-

Cast iron - Steel - Mechanised welding - Power transmission equipment

Usines de Bussy - BP 33, 52300 Joinville+33 (0)3 25 94 04 24 +33 (0)3 25 94 35 07

www.ferrycapitain.fr [email protected]

ORGANIZATION

FERRY-CAPITAIN currently has 430 employees, including 15 engineers, with an average age of 42. The site is located in Joinville in Haute-Marne, 250 km east of Paris. In 2011, FERRY-CAPITAIN invoiced a total of €85 million, 75% of which came from exports.

ACTIVITIES

FERRY-CAPITAIN specialises in the manufacture of large, mechanical assemblies, machining completed, for capital equipment. The company’s target markets include grinding in mineral processing, the cement industry, the energy sector (including wind energy), the steel industry, and large-scale mechanical engineering. It has large iron and steel foundries (up to 70 tonnes) and a machining and cutting shop for large-scale gears (up to 14 metres in diameter). FERRY-CAPITAIN produces wheel hubs, blade bases, covers, and hollow shafts, machining finished, for various wind farm builders.Key numbers: 430 employees. €85 million in turnover, 75% of which came from exports. Maximum weight of finished parts from the foundry is 110 tonnes in spheroidal graphite cast iron and 80 tonnes in steel.

LOCATIONS

Champagne-Ardenne, Nord-Pas de Calais.

PAR

TNER

STR

AIN

ING

CEN

TRES

MA

NU

FAC

TUR

ERS

DEV

ELO

PER

S/O

PER

ATO

RS

SUPP

LIER

S


BUSI

NES

SES

SELE

CTE

D

F

FIXATORDesign and manufacture of working-at-height access solutions for wind turbines,

including suspended blade and mast access platforms, service lifts, and ladder-

mounted climb assist systems

Parc d’activités 8 rue du Bois Rinier - BP 10041, 49181 Saint-Barthélémy d’Anjou+33 (0)2 41 31 17 00 +33 (0)2 41 31 17 10

www.fixator.com [email protected]

ORGANIZATION

For more than 80 years, Fixator has been designing and manufacturing winches and suspended platforms to lift personnel and equipment. Our teams of engineers and technicians have the skills and expertise to provide innovative solutions that satisfy the most demanding requirements with regard to working at great height. All motorised suspended wind turbine platforms are designed in accordance with machine directive 2006/42/EC and approved by a notified body. All Fixator services are performed according to ISO 9001, version 2008, and are certified by the LRQA.

ACTIVITIES

Fixator designs and manufactures motorised suspended platforms to access blades and wind turbine masts. Fixator also designs internal access systems such as service lifts and ladder-mounted climbing aids.

LOCATIONS

Pays de la Loire.

PAR

TNER

STR

AIN

ING

CEN

TRES

MA

NU

FAC

TUR

ERS

DEV

ELO

PER

S/O

PER

ATO

RS

SUPP

LIER

S


BUSI

NES

SES

SELE

CTE

D

F

FMGC SUBSIDIARY OF FARINIA GROUP-

Manufacture ballasts in grey cast iron

Z.I. de Soudan, Hochepie, 44110 Soudan+33 (0)2 40 28 50 73

www.fmgc.fr [email protected]

ORGANIZATION

Farinia group includes different companies in foundry and forge. The BPI, a public funding company, is shareholder of the group. FMGC is a foundry which generates a turnover of 70,7 M€ with 326 employees. Company has a production capacity of 110 000 t/years of grey cast iron for parts between 500 kg to 25 t.

ACTIVITIES

Located in west of France, FMGC makes design, realizes and develops ballasting solutions in grey cast iron for cranes and publics works equipments.For 3 years, the company has launched a diversification of its activity towards the market of Marine Renewable Energy, especially for wind power onshore and offshore but also for tidal and wave power.Aware of needs of the sector concerning factory of complex mechanical parts, that french foundries are not able to produce ; with a wealth of investment and technologic ongoing program. FMGC positions as a leading player to supply and develop the foundry sector.

LOCATIONS

Loire-Atlantique, at less than one hour from Atlantic Coasts.We are thinking about opportunities to build a new foundry in dockside to meet all needs of Marine Renewable Energy sector as a whole.

PAR

TNER

STR

AIN

ING

CEN

TRES

MA

NU

FAC

TUR

ERS

DEV

ELO

PER

S/O

PER

ATO

RS

SUPP

LIER

S


BUSI

NES

SES

SELE

CTE

D

F

FOURÉ LAGADEC SARL SUBSIDIARY OF FOURE LAGADEC SA-

Industrial Maintenance and Boilermaking

164 boulevard de Graville, 76600 Le Havre+33 (0)2 35 25 59 99 +33 (0)2 35 25 20 85

www.fourelagadec.com [email protected]

ORGANIZATION

The Fouré Lagadec company, based in Le Havre harbor, build boiler works and is ready to provide towers, foundations and steel structure.During the Group history, we have acquired an expertise in the Energy and Marine areas and we have assimilated a wide know-how and technical competencies in the industrial maintenance, in the pressure vessel manufacturing, in the electrical motors and the marine engineering.

ACTIVITIES

Currently, we develop those essential features from the Wind Energy:• Steel Structures (transition pieces – nodes – towers…)• Conception and manufacturing of special equipments for cabling vessels• Maintenance services

LOCATIONS

We own multiple technical resources dedicated to the industry.Our plant in Le Havre has 30 000 m² workshop area, a 250 T lifting capacity and an in-house control and mechanical test laboratory.

PAR

TNER

STR

AIN

ING

CEN

TRES

MA

NU

FAC

TUR

ERS

DEV

ELO

PER

S/O

PER

ATO

RS

SUPP

LIER

S


BUSI

NES

SES

SELE

CTE

D

P

PAUMELLEBoilermaking, Sheet metal working, Mechanic,

Metallic structure building

2 rue de l’abbaye, 76210 Gruchet le Valasse+33 (0)2 35 31 07 82 +33 (0)2 35 38 80 13www.paumelle.com [email protected]

ORGANIZATION

Paumelle is a 50 years old company specialized in all aspects of metal working:• Mechanic – Industrial maintenance• Machining• Metallic structure building (qualibat 4412 – 4421)• Sheet metal working• Boiler construction / mechanized welding• Renovation of water mills and hydroelectric power stations

ACTIVITIES

Our goal is to develop our business in the wind power industry.

LOCATIONS

We are located at Gruchet le Valasse in Normandy, close to Le Havre, Fécamp, the A29 motorway, the Seine river and the sea.

PAR

TNER

STR

AIN

ING

CEN

TRES

MA

NU

FAC

TUR

ERS

DEV

ELO

PER

S/O

PER

ATO

RS

SUPP

LIER

S


BUSI

NES

SES

SELE

CTE

D

P

PLASTIMA COMPOSITES SUBSIDIARY OF FA2P-

Manufacture of composite parts

ZA de la Maladrerie, 53240 Andouille+33 (0) 243 697 014 +33 (0) 243 687 374

www.plastima.fr [email protected]

ORGANIZATION

SAS (simplified private limited company) with a capital of €150,000. Eighty employees. Plastima Composites specialises in the development and manufacture of composite parts for the building sector, boats, industrial bodywork, shipbuilding, and more. Its engineering office is equipped with a 3D workstation and works closely with regional laboratories. The office is available for any kind of design work and technical assistance.

ACTIVITIES

Plastima Composites is an expert in the various open- and closed-mould manufacturing processes, such as RTM and infusion. Its infrastructures enable it to manufacture all nacelle shroud parts and all other external fittings (platforms, ladders, etc.) In addition to moulding composite parts, we create fully-equipped subassemblies, fitted with metal, electrical, and electronic parts.

LOCATIONS

Located near Laval, Plastima Composites owns a 12,000 m2 indoor industrial site on 30,000 m2 land which could be extended. The company also has two other industrial sites: Polyecim in Saint-Nazaire and Yffiplast Composites near Saint-Brieuc.

PAR

TNER

STR

AIN

ING

CEN

TRES

MA

NU

FAC

TUR

ERS

DEV

ELO

PER

S/O

PER

ATO

RS

SUPP

LIER

S


BUSI

NES

SES

SELE

CTE

D

P

PRONAL SASElastomer Engineering

Z.I Roubaix Est - Rue du Trieu du Quesnoy, 59115 Leers+33 (0)3 20 99 75 29 +33 (0)3 20 99 75 20www.pronal.com [email protected]

ACTIVITIES

Pronal has a long & solid experience in the design of customized solutions to increase buoyancy during the installation of 3,4 or 8 legged jackets and to provide sealing systems for the annulus grouting operations used in Oil&Gas and Marine Energy projects. Pronal can provide offshore expertise in five main areas: installation of platforms, subsea construction & maintenance, pipeline support & protection, salvage & decommissioning operations and the handling of fluids topside & subsea.

LOCATIONS

Pronal production site is located in Leers, close to the Belgium border.

PAR

TNER

STR

AIN

ING

CEN

TRES

MA

NU

FAC

TUR

ERS

DEV

ELO

PER

S/O

PER

ATO

RS

SUPP

LIER

S


BUSI

NES

SES

SELE

CTE

D

S

SOLUTIONS COMPOSITESComposite materials construction and engineering

2 rue du plateau - ZI les Gaudières, 37390 Mettray +33 (0)2 47 54 99 36+33 (0)2 47 54 36 70 www.solutionscomposites.fr [email protected]

ORGANIZATION

Technical components, advanced technology equipments and infrastructures “turnkey” ... our expertise in the field of composites is recognized and translated by numerous references, innovative concepts, and numerous clients in the constuction and industrial sector. 12 persons, 1,000 m2 of infrastructure and around 1Meuros of turn over. We control the value chain of your projects during all stages:RandD / Design / Engineering (Design and calculation) / Construction / Installation and deployment site / After-Sales Service.We are able to position ourselves on projects of all sizes, from simple to more ambitious with a strong network of partners that beyond our borders. Our organization relies on entrepreneurial teams and qualified, very concerned about the quality of our services throughout the development process• A team RandD, skilled in the innovation process (applied research, laboratory / testing)• A design and industrialization teamConception of parts, components, and composite profiles. Degree in design technology Pultrusion, PULLWINDING, centrifugation, infusion molding, RTM, SMC. (CAD SolidWorks)Not to mention the design of plastic and metal parts, integration of components (equipment, information systems ...) and design of structures.Selection of appropriate production technologies, development of specific industrial processes, selection and monitoring supplier quality• A team of production / constructionOur companions, skilled, experienced and versatile mastered all the production technologies used in our company:- Machining and assembly of composites- Woodworking and metals- construction in workshop and on-site deployment

ACTIVITIES

Helicopter deck or plateform,blade reinforcement profiles by pultrusion, nacelle cladding, wind turbine spinner, inside tower or work plateform and access, ladder, technical parts

LOCATIONS

Only one plant in center-western area of France.

PAR

TNER

STR

AIN

ING

CEN

TRES

MA

NU

FAC

TUR

ERS

DEV

ELO

PER

S/O

PER

ATO

RS

SUPP

LIER

S


BUSI

NES

SES

SELE

CTE

D

S

ST INDUSTRIESMachining of mechanical parts

ZA de Kerbiquet, 22140 Cavan+33 (0)2 96 91 38 67 +33 (0)2 96 91 30 72

www.stindustries.fr [email protected]

ORGANIZATION

ST Industries is an operational holding company that owns shares in four Breton companies: Armor Précision Méca, UCN Méca, Decarmor, and Breizh Usinage Services. They have an annual turnover of €11 billion, 115 employees, and a capacity of 250,000 hours of numerical control per year. ST Industries offers a wide variety of services and products, from prototypes to mass production, mechanical integration, repairs, maintenance, small and large parts, all types of metal, titanium, engineered plastic and composites. UCN Méca and Breizh Usinage Services make highly-technical small and medium-sized parts with high added-value. The companies work mostly in the fields of oceanography, oil exploration, telecoms applications, special laboratory machines and energy. Armor Précision Méca provides maintenance services for regional industries, mechanised welding of subassemblies, and machining of large parts. Decarmor is a bar turning company that works mostly with valves and water and gas regulation. The equipment consists of 25 machining centres, 31 numerical control lathes, 19 conventional lathes and 9 conventional milling machines, 5 MIG and TIG welding stations, and wire and die-sinking electrical discharge machines.

ACTIVITIES

UCN Méca is ISO 9001-certified and guarantees Armor Précision Méca, which specialises in large-scale machining. After a recent audit, the companies were pre-qualified by Areva for bidding on the “Ailes Marines” project in the Saint-Brieuc bay.

LOCATIONS

UCN Méca, Armor Précision Méca, and Decarmor are all located in Côtes-d’Armor. Breizh Usinage Services is located in Finistère and has two workshops: one in Pleyben and one in Guipavas.

PAR

TNER

STR

AIN

ING

CEN

TRES

MA

NU

FAC

TUR

ERS

DEV

ELO

PER

S/O

PER

ATO

RS

SUPP

LIER

S


BUSI

NES

SES

SELE

CTE

D

S

STO LOGISTIQUEService vessels for charter

32 bis rue d’Ault, 80130 Bethencourt-sur-Mer+33 (0)3 22 61 34 38

[email protected]

ACTIVITIES

Supply of service vessels to conduct studies, take measurements, provide assistance, transport technicians and small freight, put up markers and buoys, and perform underwater work.

LOCATIONS

Head office located in Picardy, the vessel can operate along the entire coast of France. Operations from Calais to Saint-Nazaire since 2008. We also carry out operations and work in the Mediterranean Sea.

PAR

TNER

STR

AIN

ING

CEN

TRES

MA

NU

FAC

TUR

ERS

DEV

ELO

PER

S/O

PER

ATO

RS

SUPP

LIER

S


BUSI

NES

SES

SELE

CTE

D

T

TE2MDesign and manufacture of magnetising equipment for

permanent magnets, devices for magnetic measurements,

magnetic systems, and magnetic mechanisms (couplings,

electromagnetic suction cups, gears, etc.)

600 rue Alain Colas - Z.I.Portuaire, 29200 Brest+33 (0)2 98 02 22 36 +33 (0)2 98 42 16 73

www.te2m.com [email protected] [email protected]

ORGANIZATION

Design: Magnets/mechanical assemblies/electromagnets, machining, milling, grinding, 4- and 5-axis machining centre, surface treatment, painting, and fully integrated manufacture of our equipment.

ACTIVITIES

• Magnetising alternator magnets - Before or after assembly (depending on the configuration)• Remagnetisation of demagnetised permanent magnets (disassembled or on alternators, depending on the configuration)• Magnetic measurements of magnetic circuits or magnets (flux, field, induction, etc.)

LOCATIONS

Brittany.

��

��

��

��

� �� !"#�$$�#��%&��

� �'�#��"#��'(��"�"�( #&�)� #�

� �� '' #�*��+, #"!"#+� �+��"#"��"��(��*#��"-��"��)"

��

TRAINING CENTRES FOR WIND TURBINE MAINTENANCE TECHNICIANS

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

MA

NU

FAC

TUR

ERS

DEV

ELO

PER

S/O

PER

ATO

RS

SUPP

LIER

S


TRA

ININ

G C

ENTR

ES

C

C.E.P.S. (Centre d’Etude et de Pratique de la Survie)Centre for Maritime Safety Training in Lorient

37 avenue des Colverts, 44380 Pornichet+33 (0)2 40 61 32 08 +33 (0)2 40 61 61 08

www.ceps-survie.com [email protected]

ACTIVITIES

Certified by BZEE, ISO 9001, and 29990 LRQA.

LOCATIONS

Lorient (Morbihan).

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

MA

NU

FAC

TUR

ERS

DEV

ELO

PER

S/O

PER

ATO

RS

SUPP

LIER

S


TRA

ININ

G C

ENTR

ES

L

LP RAOUL MORTIER (Lycée des métiers des énergies et des services aux entreprises)Vocational training, BZEE certification

72 avenue de l’Europe, 86500 Montmorillon+33 (0)5 49 83 06 16 +33 (0)5 49 91 57 24

www.raoul-mortier.fr [email protected]

ORGANIZATION

The training site at the La Barre industrial zone in Montmorillon features a 30-metre training tower, a 150 m2 workshop with a two-and-a-half-tonne bridge crane and three nacelles. At the Lycée Pro Raoul Mortier, students can learn how to repair wind turbine blades in a 60 m2 composite workshop.

ACTIVITIES

The Lycée provides training for wind farm maintenance technicians and issues BZEE certificates. The training course lasts 16 weeks, plus eight weeks’ training at a company, and one week of exams. Students at least 18 years old with a BTS (technician certificate) or Bac Pro (vocational baccalaureate) are hired in electronics or maintenance fields. The course can accept up to 12 students.

LOCATIONS

Montmorillon is a municipality in the Vienne department of France. It is close to large cities, including Poitiers (44 km), Châtellerault (58 km), and Limoges (82 km).

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

MA

NU

FAC

TUR

ERS

DEV

ELO

PER

S/O

PER

ATO

RS

SUPP

LIER

S


TRA

ININ

G C

ENTR

ES

L

LYCEE DHUODAFCIL: Training course for wind farm maintenance technicians*

17 rue Dhuoda - BP 17155, 30913 Nîmes cedex+33 (0)4 66 04 85 82 +33 (0)4 66 04 85 77

www.lycee-dhuoda-nimes.com [email protected]

ORGANIZATION

The institute offers post-Baccalauréat training to become a wind farm maintenance technician. Training takes place on high-powered equipment. Learning modules meet the standards of professionals seeking qualified labour. At the end of training, certified students will have the skills and knowledge to work on a wind turbine. For more information, go to www.eolien-dhuoda.com.

ACTIVITIES

Training as a school student or a job seeker, as an employee or on study leave.Key numbers: Training lasts six months (26 weeks, including eight at a company). Two sessions are held each year (a September and a January session, each with 15 places).

LOCATIONS


*Training that meets the criteria of the Format’eree Charter.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

MA

NU

FAC

TUR

ERS

DEV

ELO

PER

S/O

PER

ATO

RS

SUPP

LIER

S


TRA

ININ

G C

ENTR

ES

L

LYCEE FRANCOIS BAZINTraining

145 avenue Charles de Gaulle, 8013 Charleville-Mézières+33 (0)3 24 56 81 56 +33 (0)3 24 56 81 57www.lyceebazin.net [email protected]

ORGANIZATION

Lycée des Métiers des Technologies Industrielles et de l’Énergie François Bazin. (François Bazin college of industrial technology and energy trades).

ACTIVITIES

Wind farm maintenance technician training leading to a BZEE professional qualification certificate recognised by industry professionals. Mixed initial training with GRETA for 20 technicians per year. Training partnership with Technifutur in Belgium: 16 technicians trained each year. Training partnership with the IUT in Châlons-en-Champagne.

LOCATIONS

Champagne-Ardenne.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

MA

NU

FAC

TUR

ERS

DEV

ELO

PER

S/O

PER

ATO

RS

SUPP

LIER

S


TRA

ININ

G C

ENTR

ES

W

WINDLAB PICARDY REGIONAL COUNCIL-

Picardy regional platform

11 mail Albert 1er - BP 2616, 80026 Amiens cedex 1+33 (0)3 22 97 38 83 +33 (0)3 22 97 35 45

www.picardie.fr Virginie Renault : [email protected]

ORGANIZATION

WindLAB is equiped by:• workshop : 3 nacelles, gantry, painting room, advanced electrical materials, measuring instruments• 30 metres training tower,• technical class room.

ACTIVITIES

WindLAB area propose 3 main activities : • Windindustry promotion, professional guidance,• Training for maintenance technician for jobseekers, students and employees,• Provision of technical equipments for partners’ R&D projects.

LOCATIONS

Amiens.

WIND TURBINE MANUFACTURERS

PEFC (Programme for the Endorsement of Forest Certification schemes)

is to show that wood comes from sustainably managed foff restsbased on the Helsinki criteria. • Preservation of the foff rest heritage and contribution to global

carbon cycles.• Maintenance of healthy foff rest ecosystems.• Maintenance and encouragement of foff rest production systems.• Improved biodiversity.• Improved systems forff protecting foff rest management, especially

soil and water. • Maintenance of socio-economic conditions.

Like foff r the FSC, our role as a processor is to manage the traceability of paper,r and the conditions for using the logo are subject to regulations.

FSC (Forest Stewardship Council) This international non-governmental organization was created in1993 under the impetus of associations like Friends of the Earth,Greenpeace and the WWF. Its aim is to certify that wood comes from well-managed foff rests in line with replanting and biodiversity

objective is to organize thorough traceability of matter used. ToTT

that we can only use the FSC logo on documents we produce if

The Windustry directory was printed on PEFC certified

paper

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESD

EVEL

OPE

RS/

OPE

RA

TOR

SSU

PPLI

ERS


MA

NU

FAC

TUR

ERS

A

ALIZEOWind turbine manufacturer

4 rue Saint Florentin, 75001 Paris+33 (0)1 73 02 94 42

www.groupe-alizeo.com [email protected]

ORGANIZATION

SA (Limited liability company) with a capital of €1,375,669.01 • Paris Trade and Companies Register 495 311 391

ACTIVITIES

Designer and manufacturer of 1 MW, retractable wind turbines. Developer and operator of wind farms inside and outside of cyclone zones:• Civil engineering structures that can be fully dismantled with ease• Very small footprint, less than 200 m2

• Technology based on counterweight systems and equipped with hydraulic jacks• Use of standard equipment of proven reliability available on the market• 1 MW synchronous wind generators with direct drive or Multibrid epicyclic drive train and permanent magnets• Large-diameter, three-blade rotors for low to medium winds• Retracts into the earth in less than an hour in the event of a cyclone• Rises and restarts production in less than an hour• Withstands sustained winds of 150 kph when vertical • Withstands sustained winds of 250 kph when retracted.

LOCATIONS

Our plants and subsidiaries:ALIZEO Industrie in Lons le Saunier (Jura)ALIZEO ROUSSILLON in Perpignan (Pyrénées-Orientales)ALIZEO MASCAREIGNES in RéunionALIZEO CARAÏBES in MartiniqueSOFTWIND subsidiary manufacturing wind generators.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESD

EVEL

OPE

RS/

OPE

RA

TOR

SSU

PPLI

ERS


MA

NU

FAC

TUR

ERS

A

ALSTOMEnergy sector

3 avenue André Malraux, 92307 Levallois-Perret+33 (0)1 41 49 20 00

www.alstom.com

ORGANIZATION

Alstom is a world leader in infrastructure used to produce and transmit electricity and in the rail transport industry. The Group raises the bar with its innovative, environmentally-friendly technologies. With the largest portfolio of products on the market, Alstom covers all energy sources, from gas to wind power. Its clean technologies generate enough electricity to power 1.2 billion households around the world.

ACTIVITIES

With 30 years of experience in wind power, Alstom provides global solutions, covering the development, design and installation of wind farms to supplying and maintaining wind turbines. Alstom offers a wide range of onshore wind turbines with up to 3 MW of nominal power. Its 2,500 wind turbines have a total power of more than 4,500 MW.Alstom, a major player in the offshore wind industry, installed the world’s largest offshore wind turbine, the Haliade™ 150-6 MW, off the Belgian coast. This new generation 6 MW turbine incorporates proven Alstom Pure Torque® technology, which guarantees reliability of the transmission line. Each Haliade™ 150-6 MW unit powers the equivalent of 5,000 homes. These high-tech, innovative direct drive offshore wind turbines stand up to all offshore conditions and supply electricity at competitive prices.With its Haliade™ 150-6 MW wind turbine, Alstom is the exclusive provider for the consortium led by EDF EN. Alstom was selected for the three projects it tendered for at the Saint-Nazaire, Courseulles-sur-Mer, and Fécamp sites, for a total of about 240 wind turbines.An industrial plan allowing the creation of a sector for outstanding French industries in offshore wind energy is taking shape, in particular with the installation of four plants at Saint-Nazaire and Cherbourg. This measure will be accompanied by the opening of an Alstom engineering and R&D centre dedicated to marine renewable energy—the first of its kind in France.

LOCATIONS

Alstom’s head office is located in Levallois-Perret.Its engineering centre is located in Nantes.Its wind power operations headquarters is located in Barcelona, Spain.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESD

EVEL

OPE

RS/

OPE

RA

TOR

SSU

PPLI

ERS


MA

NU

FAC

TUR

ERS

X

LEADING THE NEW GENERATION OF LARGEHIGH-EFFICIENCY WIND TURBINESWith its 122m rotor diameter and swept area of 11,700 m2, Alstom’s ECO 122 offers a unique combination of high power and high capacity factor in medium and low wind regions worldwide. The new ECO 122 range available with a nominal output of 2,7 MW and now 3 MW (offering up to +6% additional yield vs. the ECO 122 2.7MW), is the latest evolution of Alstom’s proven ECO 100 platform and the result of more than 30 years of experience in wind turbine design.

ECO 122 - NEW 3 MW UPGRADE

www.alstom.com

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESD

EVEL

OPE

RS/

OPE

RA

TOR

SSU

PPLI

ERS


MA

NU

FAC

TUR

ERS

A

AREVA - BU OFFSHORE WIND SUBSIDIARY OF AREVA-

Wind turbine fabrication and maintenance

1 place Jean Millier, 92084 Paris La Défense cedex+33 (0)1 34 96 30 00 +33 (0)1 34 96 35 40www.areva.com [email protected]

ORGANIZATION

AREVA supplies advanced technology solutions for power generation with less carbon. Its expertise and unwavering insistence on safety, security, transparency and ethics are setting the standard, and its responsible development is anchored in a process of continuous improvement.Ranked first in the global nuclear power industry, AREVA’s unique integrated offering to utilities covers every stage of the fuel cycle, nuclear reactor design and construction, and operating services. The group is also expanding in renewable energies – wind, bioenergy, solar, energy storage – to become a European leader in this sector.With these two major offers, AREVA’s 46,000 employees are helping to supply ever safer, cleaner and more economical energy to the greatest number of people.

ACTIVITIES

AREVA designs, manufactures, assembles and commissions high-output wind turbines specially designed for the offshore market. The 5 MW AREVA M5000 have proven their performance at sea on the alpha ventus offshore wind farm, in operation since 2009. Thanks to its proven technology and its industrial basis the group was selected for 2 major projects, which installation was launched during summer 2013. By 2014, 120 turbines representing 600 MW will be installed at sea.The group also developed the next generation turbine, the AREVA 8 MW, based on its proven platform.For the offshore wind farms in France, Belgium and Southern UK, the AREVA 5 and 8 MW turbines will be produced in the group’s factories to be settled in Le Havre ; an opportunity for the French suppliers to take part into the offshore wind industry built by AREVA.

LOCATIONS

Île-de-France, Upper Normandy.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESD

EVEL

OPE

RS/

OPE

RA

TOR

SSU

PPLI

ERS


MA

NU

FAC

TUR

ERS

X

L’énergie est notre avenir, économisons-la !

L’AVENIR POUR ÉNERGIE,C’EST INSTALLER120 ÉOLIENNESEN MER DU NORD D’ICI À 2014.

712

05

4 9

23

RC

S N

AN

TE

RR

E –

–

Cré

dit

photo

: Ja

n O

elk

er

Chez AREVA, les défis énergétiques de demain sont une préoccupation de tous les jours. En mobilisant nos expertises pour porter les énergies renouvelables au plus haut niveau de maturité technologique et de compétitivité, nous nous donnons les moyens de figurer au premier rang des acteurs de la transition énergétique. C’est aussi ça, avoir l’avenir pour énergie. areva.com

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESD

EVEL

OPE

RS/

OPE

RA

TOR

SSU

PPLI

ERS


MA

NU

FAC

TUR

ERS

X©

EN

ERTR

AG

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESD

EVEL

OPE

RS/

OPE

RA

TOR

SSU

PPLI

ERS


MA

NU

FAC

TUR

ERS

D

DDIS SUBSIDIARY OF OVH-

Manufacturer of high power wind turbines

Parc d’Activités Europescaut - 1 rue de l’Europe, 59410 Anzin +33 (0)3 27 32 07 98+33 (0)3 27 31 60 41 www.ddiswt.com [email protected]

ORGANIZATION

DDIS is an electrical engineering company founded in may 2008.Prizewinner of the “Concours National d’Aide à la Création d’Entreprise en Technologies Innovantes”, DDIS, Young Innovative Company, federated many supports among which Oseo, the Ministry of Research, Europe...

ACTIVITIES

DDIS designs, certifies and manufactures wind turbines offering several advantages :• Intrinsic reliability using simple and modular components i.e each module stator is impregnated under vacuum and pressure• Compactness through a clever and modular design• Significant weight reduction thanks to the axial flux and multiphase technology• Fully compliant with the new grid regulations (“grid code”) thanks to a permanent magnet machine and a full power converter (DC bus controlled by a chopper)• Capable of operating easily under withdrawal mode and /or enhanced performance through the design of the multiphase machine• Easily switchable to the multi-megawatt range without costly investments in production• Readily transportable due to its modular designThe primary target of DDIS is the wind energy sector, a fast growing market in which DDIS’s technology can bring real competitive advantages:no gearbox, lower total head mass, high grid compatibility.Using an innovating technology protected by international patents, DDIS has developed a three-bladed wind turbine equipped with a direct drive, permanent magnet, multiple pole, multiphase synchronous axial flux generator.As the same time as the marketing of DDIS60, the DDIS target is double :• Impose its technology on the offshore market and develop wind turbine multi-megawatt by capitalizing on the technological developments carried out on the DDIS60.• Sell Manufacturing Licenses of its Technology

LOCATIONS

800kW Wind turbine prototype: DDIS60 in Onnaing (North of France)First wind turbine site equipped with 8 DDIS60 (800 kW) in Ortoncourt (East of France)

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESD

EVEL

OPE

RS/

OPE

RA

TOR

SSU

PPLI

ERS


MA

NU

FAC

TUR

ERS

E

ENERCON GMBHGMBH : construction and sale of wind turbines

ESF : maintenance and after-sales service

GmbH : Z.I N°2 - Impasse du Pré BernotESF: 9001 rue du Tourteret, 60880 Le Meux

GmbH : +33 (0)3 44 83 67 20 ESF: +33 (0)3 44 37 35 10GmbH : +33 (0)3 44 83 67 29 ESF: +33 (0)3 44 37 35 20

www.enercon.fr [email protected]

ORGANIZATION

Founded in 1984, Enercon GmbH is a German constructor of wind turbines with branches and subsidiaries around the world.

ACTIVITIES

Enercon designs, manufactures, and sells wind turbines of varying powers, from 330kW to 7.5 MW. Its unique technology without a gearbox reduces noise levels and facilitates maintenance operations. Today, the company owns nearly 40% of all patents in the wind power industry. There are currently more than 19,000 Enercon wind turbines in operation in over 39 countries, for a total of more than 26,000 MW of rated power. The company employs nearly 13,000 people around the world.

LOCATIONS

Picardy.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESD

EVEL

OPE

RS/

OPE

RA

TOR

SSU

PPLI

ERS


MA

NU

FAC

TUR

ERS

G

GAMESA EOLICA Construction, sale, and maintenance of wind turbines

97 allée Borodine - Cedre 3, 69800 Saint-Priest+33 (0)4 72 79 49 39

www.gamesacorp.com [email protected]

ORGANIZATION

With an annual turnover of €2.7 billion worldwide, 2,600 MW of energy sold in 2012, 19 years of experience gained on 28GW of rated power, and plants and offices around the world, Gamesa is a world leader in wind generator construction (ranked 4th in the world for cumulative installed capacity in 2012, according to BTM Consult). Gamesa also offers a wide range of services, in particular, it oversees maintenance for 19,800 MW around the world (including 600 MW in France at the end of 2013 out of 720 MW installed by GAMESA). Gamesa has invested in considerable R&D resources (€150 million over three years) to reduce energy costs (20% by 2013 and 30% by 2015) by developing more efficient wind generators.The company has three entities which: (1) develop, produce, and sell wind generators; (2) maintain wind generators throughout their service life and (3) develop wind farms.

ACTIVITIES

Gamesa offers onshore wind generators with the following output:• 850 kW: G52 and G58 models• 2.0 MW: G80, G87, G90, G97 and G114 models• 2.5 MW: G114 models• 4.5-5 MW: G128 and G132 models.Gamesa also designs offshore wind generators with 5 MW and 7 MW of output. Its first operational prototype appeared in late 2013.Gamesa provides wind generator maintenance services, ranging from simple remote management to full contracts with standard, 15-year terms. A new Life Extension program for wind generators is also available.

LOCATIONS

Île-de-France, Nord, Upper Normandy, Pays de la Loire, Aquitaine, Franche-Comté, Rhône-Alpes, Provence-Alpes-Côte d’Azur, Poitou-Charentes, and Limousin.Île-de-France Office: 118-122 avenue de France, 75013 Paris • [email protected]

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESD

EVEL

OPE

RS/

OPE

RA

TOR

SSU

PPLI

ERS


MA

NU

FAC

TUR

ERS

G

GE WIND ENERGY SUBSIDIARY OF GENERAL ELECTRIC-

Construction, sale, and maintenance of wind turbines

Tour Europlaza 29C3 - 20 avenue André Prothin, 92063 Paris La Défense cedex+33 (0)1 41 97 56 33 +33 (0)1 41 97 56 56

www.ge-renewable-energy.com [email protected]

ORGANIZATION

GE Power & Water has more than 90,000 employees worldwide in the gas turbines, nuclear energy, water and process technologies, and renewable energy sectors.GE Power & Water is a leading world provider of energy solutions and related technology. The company has more than 9,500 employees in Europe. Its Belfort site in France has 1,000 employees and is a world centre of excellence. Belfort is the only production site in France for medium- and high-power gas turbines. The Salzbergen location in Germany is a centre of excellence in wind power.

ACTIVITIES

Today, GE Power & Water is considered one of the world leaders in wind power, with more than 18,000 wind turbines already installed worldwide.GE Energy designs and manufactures wind generators from 1.5 to 4.1 MW. It also offers a wide range of related services, from project development (technical and financial assistance for project development) to wind farm maintenance and operation.Its range of 2.5-100/3.2-103 wind turbines is particularly adapted to the European market. They are based on GE Energy’s experience in 1.5 MW technology and are the most widely-sold turbines in the world, with more than 16,000 units installed and in operation.Since 2013, GE Energy has also been selling GE 2.5-120 wind turbines which are particularly suited to less windy sites (class 3). This new turbine features the best load factor in its category.All GE wind turbines offer very high annual outputs and serviceability and have more advanced network integration technologies.

LOCATIONS

GE Energy Europe centre of excellence: BelfortSales office: Paris La DéfenseWind turbine maintenance bases: St-Omer (Pas-de-Calais), Lempdes (Haute-Loire), Nantes (Loire-Atlantique), and Chalons-en-Champagne (Marne).GE Energy has more than 3,000 employees in France, including 30 for wind power alone.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESD

EVEL

OPE

RS/

OPE

RA

TOR

SSU

PPLI

ERS


MA

NU

FAC

TUR

ERS

N

NORDEX FRANCE SUBSIDIARY OF NORDEX ENERGY GMBH-

Design, manufacture, sale, installation, and maintenance of wind turbines

1 rue de la Procession, 93217 La Plaine-Saint-Denis+33 (0)1 55 93 43 43 +33 (0)1 55 93 43 40

www.nordex-online.com [email protected] [email protected]

ORGANIZATION

A developer of wind farm projects and a designer, manufacturer, and constructor of wind generators, Nordex SE is both a veteran in the sector and a pioneer in the wind power industry. Founded in Denmark in 1985, the company was the world’s first mass-producer of 250 kW, 1.5 MW, and 2.5 MW turbines. Since it was founded, the company has installed over 4,800 wind generators around the world, for over 7,500 MW of rated power. With production units in Germany, the United States, and China, and numerous subsidiaries worldwide (including France, the United Kingdom, Sweden, Italy, and Spain), Nordex SE currently has almost 2,500 employees, of which 150 work in France.

ACTIVITIES

Divided into four main departments (Sales, Development, Project Management, and Maintenance), Nordex France employees can handle the entire value chain for a wind farm project for their customers. Our clients receive the full benefit of the Nordex SE group’s expertise in wind turbine design and manufacture, and are offered the most comprehensive range of services on the market plus over 17 years of experience in executing turnkey projects in France. Nordex has created a strong skills network that makes it a market leader: Complete development of projects, supply of wind generators, execution of entire construction sites, and providing long-term maintenance of wind turbines and more.In 2011, Nordex installed its 1,000th MW in the French market.

LOCATIONS

Through its subsidiary Nordex France SAS, the company has created 13 maintenance centres to provide some of the highest availability rates on the market. Every day, 80 maintenance technicians perform crucial wind turbine inspection and management services

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESD

EVEL

OPE

RS/

OPE

RA

TOR

SSU

PPLI

ERS


MA

NU

FAC

TUR

ERS

S

SENVION FRANCE SAS SUBSIDIARY OF SENVION SE (FORMERLY REPOWER)-

Wind turbines development, manufacturing, sales, installation and maintenance

10 avenue de l’Arche - Immeuble Le Colisée - La Défense, 92419 Courbevoie cedex+33 (0)1 41 38 93 93 +33 (0)1 41 38 93 94

www.senvion.com/fr [email protected]

ORGANIZATION

Senvion SE is one of the world’s leading manufacturers of onshore and offshore wind turbines. With more than 3,300 employees worldwide, the company can make use of the experience gained from the manufacture and installation of more than 5,000 wind turbines (9.5 GW) around the world. Senvion is present in France since 2002. Today, Senvion France SAS employs 180 people, of which 100 technicians in France.

ACTIVITIES

Wind turbines development, sales, manufacturing, installation, service and maintenance.

LOCATIONS

13 service bases in France: Champagne-Ardenne, Picardie, Nord-Pas-de-Calais, Poitou-Charentes, Normandie, Bretagne, Languedoc-Roussillon and Centre. Senvion France SAS is headquartered in Paris La Défense.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESD

EVEL

OPE

RS/

OPE

RA

TOR

SSU

PPLI

ERS


MA

NU

FAC

TUR

ERS

S

SIEMENS WIND POWER SUBSIDIARY OF SIEMENS SAS-

Energy

9 boulevard Finot, 93527 Saint-Denis+33 (0)1 49 22 94 08 +33 (0)1 49 22 94 00www.siemens.fr [email protected]

ACTIVITIES

Secteur Energy is a world leader and major player in the French energy market, in particular with its comprehensive range of products, services and solutions for renewable energy production and energy transmission.A world leader in offshore wind energy with nearly 3.4 GW installed, Siemens Wind Power offers reliable, robust, turbines based on advanced technology, particularly in the field of blade design (Siemens IntegralBlades®) and power electronics (Siemens NetConverter®). Design, manufacture, installation, and maintenance: Siemens wind power generators benefit from over 25 years of experience in onshore and offshore wind turbines.Siemens Wind Power has a sound organisation in France, with a sales team offering the entire range of Siemens wind turbines, a project team that closely manages execution phases, and specific maintenance teams for each site, guaranteeing a high level of availability for the 302 MW already in operation in France and the 72 MW currently being installed. Thanks to its skills centre, which has a staff of 120 employees and constructs substations in France and abroad, Siemens Wind Power can provide a full range of turnkey solutions for offshore wind farms, including the civil and electrical engineering.

LOCATIONS

Nord, Picardy, Tarn, and Brittany.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESD

EVEL

OPE

RS/

OPE

RA

TOR

SSU

PPLI

ERS


MA

NU

FAC

TUR

ERS

V

VESTAS FRANCEDesign, manufacture, sale, installation, and maintenance of onshore and offshore

wind turbines

Siège social : 55 impasse John Locke - Parc de l’aéroport - 34470 PérolsEtablissement de Paris : Tour Opus 12 - La Défense 9

77 esplanade du Général De Gaulle - 92914 La Défense cedex, Siège : + 33 (0)4 67 20 22 02 Paris : + 33 (0)1 55 67 97 00Siège : + 33 (0)4 67 20 78 99 Paris : + 33 (0)1 47 74 73 88

www.vestas.fr [email protected]

ORGANIZATION

Vestas is a world leader in wind turbine production. For 30 years, the company has specialised in developing, manufacturing, selling, installing, and maintaining onshore and offshore wind turbine systems that use wind to produce electricity. At the end of June 2010, Vestas had delivered more than 41,400 wind turbines around the world generating over 60 million MWh per year–enough energy to power millions of households.

ACTIVITIES

Vestas France sells, installs, services, and maintains wind turbines in France. The company has been present in France since 2000, opening its first sales and maintenance office in Pérols near Montpellier in 2002, before opening a new office in Paris in 2009. Today, Vestas France has nearly 200 employees, and its staff has more than doubled in the last three years. On 30 June 2010, Vestas France had more than 534 wind turbines in operation, for a total of more than 1,000 MW of rated power. Vestas France is ISO 9001 and OHSAS 18001 certified.

LOCATIONS

Besides its Montpellier and Paris locations, Vestas France has created 6 maintenance centres in Ardèche, Aveyron, Côtes-d’Armor, Eure-et-Loir, Haute-Marne, and Pas-de-Calais. The company has signed technician training agreements (e.g. Nîmes, with the support of the Languedoc-Roussillon authorities) and has created a Product Support department, which includes all of its technical skills for its French clients.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESD

EVEL

OPE

RS/

OPE

RA

TOR

SSU

PPLI

ERS


MA

NU

FAC

TUR

ERS

V

VERGNETWorld leader in Farwind wind turbines

12 rue des Châtaigniers, 45140 Ormes+33 (0)2 38 52 35 60 +33 (0)2 38 52 35 83

www.vergnet.com [email protected]

ORGANIZATION

The Vergnet group was founded in 1989. It works in three main areas: • WIND TURBINES, through Vergnet SA and its subsidiaries: Vergnet Caribbean, Vergnet Pacific and Vergnet Indian Ocean• HYDRAULICS, through Vergnet Hydro for manual pumps• PHOTOVOLTAIC POWER, through Photalia, to provide electricity in rural Africa.

ACTIVITIES

Vergnet is the only French manufacturer of wind turbines. For more than 20 years, it has specialised in electricity production for the Farwind® market (for areas with reduced or cyclone infrastructure) and the Proxwind® market (for decentralised production). Thanks to their unique technology, Vergnet’s 200 kW to 1 MW wind turbines can be retracted to the ground for maintenance or in the event of cyclones. Vergnet also plays a major role in supplying water to rural areas in emerging countries, providing more than 50 million people with drinking water. Vergnet offers villages a complete range of services, from pumping water to transporting and storing it using products that are easy to install and maintain. Vergnet also works in the photovoltaic power sector, mostly in Africa to operate pumps and provide electricity to rural areas, and in professional applications in isolated regions where the cost of electricity generated from oil is directly affected by the price of oil.

LOCATIONS

Centre.

Cabinet d’avocats indépendant et pluridisciplinaire composé d’une quarantaine de personnes, CGR Legal est engagé depuis près de quinze ans dans le secteur des énergies renouvelables.

Ses équipes accompagnent les c l ients (développeurs de projets, fabricants de turbines, opérateurs électriques et fonds d’investisse-ment) dans le développement et la sécurisation de leurs projets industriels - en France comme à l’étranger - ainsi que dans le cadre d’opérations d’acquisition ou de cession de projets Energie.

CGR Legal i s an independent mult i - specialised law firm with forty staff. CGR Legal has been involved in the renewable energy sector for nearly fifteen years.

Its teams accompany clients (project develo-pers, turbine manufacturers, electricity opera-tors and investment funds) in developing and securing their industrial projects, both in France and abroad, as well as in acquisitions or disposals of Energy projects.

Offrant une expertise transversale reconnue, CGR Legal intervient, notamment, en :

droit public des affaires, droit de l’urbanisme, droit de l’environnement, droit électrique, contentieux administratif ; fusions-acquisitions, capital investissement, financement, droit des sociétés ; droit de l’immobilier, investissements immobiliers, et construction ; fiscalité ; droit social ; droit des contrats ; contentieux d’affaires et industriels.

Offering renowned across-the-board expertise, CGR Legal is notably involved in :

public commercial law, town planning law, environmental law, electricity law, adminis-trative litigation; mergers and acquisitions, private equity, financing, company law; real estate law, investments, construction; taxation; employment law; contract law; and commercial and industrial litigation.

35 Bd des Capucines, 75002 Paris - T 33 (0) 1 53 45 40 00, F 33 (0) 1 53 45 40 10

cgrlegal.eu

WIND TURBINE INSTALLATION DEVELOPERS AND OPERATORS

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SSU

PPLI

ERS


DEV

ELO

PER

S/O

PER

ATO

RS

A

AILENERGIE CHAMPAGNE ARDENNEWind farm development

19 avenue Charles de Gaulle - BP 53, 08300 Rethel cedex+33 (0)3 24 38 70 10 +33 (0)3 24 39 65 92

ailenergie.com [email protected]

ORGANIZATION

Founded in 2003, AILENERGIE Champagne Ardenne is a ‘société anonyme’ (limited liability company) that develops wind farms.

ACTIVITIES

Development, construction, and operation of wind farms in Champagne-Ardenne.

LOCATIONS

Champagne-Ardenne

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SSU

PPLI

ERS


DEV

ELO

PER

S/O

PER

ATO

RS

B

BAYWA R.E. FRANCE SAS Development, financing, execution and operation of wind farm projects

50 ter rue de Malte, 75011 Paris+33 (0)1 55 31 49 80 +33 (0)1 55 31 49 88

www.baywa-re.fr [email protected]

ORGANIZATION

BayWa r.e. is a wholly-owned subsidiary of BayWa AG and concentrates on renewable energy. Created in 2009, BayWa r.e. is a holding for several wind, solar, bioenergy, and geothermics companies. BayWa r.e. France SAS, a French subsidiary of the company, is based in Paris.

ACTIVITIES

BayWa r.e. works in the field of wind and photovoltaic energy, bioenergy, and geothermics. BayWa r.e. develops, co-develops, finances, executes, and operates turnkey projects. It also manages the commercial and technical operation of power plants, provides technical consulting, and is a distributor of photovoltaic components and assembly system components.

LOCATIONS

Île-de-France and Aquitaine.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SSU

PPLI

ERS


DEV

ELO

PER

S/O

PER

ATO

RS

X

© B

enoît M

EN

TREL

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SSU

PPLI

ERS


DEV

ELO

PER

S/O

PER

ATO

RS

B

BOREAS Development, construction, and operation of wind farm projects

4 rue Marconi - Centre d’affaires CESCOM - Metz Technopôle, 57070 Metz+33 (0)3 87 20 41 67 +33 (0)3 87 20 41 65www.boreas.de [email protected]

ORGANIZATION

BOREAS SARL was created in 2003 in Metz, France. It develops wind farms across France, especially in eastern regions. It uses local resources and the expertise acquired by its parent company in Germany over the last 15 years.

ACTIVITIES

Development, construction, and operation of wind farms. With nearly 15 years of experience in wind farm development in Europe, BOREAS handles all the phases of projects. It performs exploration and construction, financing, maintenance, and operation for wind farms. Our early years of work culminated in the construction of our first wind farms in France in 2007, with 12 2.5 MW Nordex wind turbines erected across three farms in Boulay-Moselle, for 30 MW in rated power.

LOCATIONS

Lorraine.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SSU

PPLI

ERS


DEV

ELO

PER

S/O

PER

ATO

RS

C

2 rue André Bonin, 69316 Lyon cedex 04+33 (0)4 72 00 69 69 +33 (0)4 72 10 66 70

www.cnr.tm.fr

ACTIVITIES

CNR is dedicated to renewable energy. It is the second-largest producer of electricity in France and the top producer of 100% renewable energy. The company was founded in 1933 to develop the Rhône River and use it for hydroelectricity production, navigation, irrigation, and other agricultural uses. A long-standing producer of hydroelectricity and a centre of excellence in hydraulics for GDF SUEZ in France, CNR is continuing highly active development in hydroelectricity and wind and photovoltaic power. CNR has 3,022 MW of installed power in hydroelectricity on the Rhône and elsewhere, 301 MW in wind energy, and 15 MWp in photovoltaic power. Its goal is to be producing 4,500 MW of 100% renewable electricity by 2015-2020. Very aware of environmental issues, extremely attentive to the surrounding populations and mindful of local development and respect for the environment, CNR places sustainable development at the centre of its concerns. It is involved in a broad general-interest programme to improve waterways, optimise hydroelectricity production, protect the environment, and strengthen its commitment to the local region.

LOCATIONS

Rhône-Alpes.

COMPAGNIE NATIONALE DU RHÔNE (CNR)French producer of 100% renewable energy

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SSU

PPLI

ERS


DEV

ELO

PER

S/O

PER

ATO

RS

X

Grap

hist

ar 0

1/14

: Ph

otot

hèqu

e CN

R /

Cam

ille

Moi

renc

Energy is our future, so save it!www.cnr.tm.fr

Exclusively renewable energy

Afully integrated company and expert in intermittent energy management, CNR controls all the processes from the design and operation of its production facilities to the sale of the energy it produces. Its experience acquired from operating the Rhone also gives it expertise in river and hydropower engineering, services that

it offers in France and abroad.Since 2004, it has carried out ambitious and voluntary programmes in the framework of its Missions in the General Interest in concert with the parties involved. This business model, considered as a reference in the sector of hydraulic concessions, is based on redistributing the results of the growth and sustainable development of the territories in which the electricity is produced.

Founded in 1933, the Compagnie Nationale du Rhône was given the concession for operating the most powerful French river in 1934, with the aim of developing and harnessing it to fulfil three missions for the community: energy production, navigation, and supplying irrigation and other uses for agriculture. It is France’s second largest electricity producer and an acknowledged actor on the energy market. With its energy certified 100% renewable, CNR is committed to developing renewable energies and diversifying its methods of producing electricity. Its goals for developing and generating capacity are ambitious, in particular in the hydropower, wind power and solar sectors. A partner of the GDF SUEZ Group, CNR places sustainable development at the heart of its strategy.

Saulce-Sur-Rhône solar power plant Bollène hydroelectric power plantFos-sur-Mer wind farm

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SSU

PPLI

ERS


DEV

ELO

PER

S/O

PER

ATO

RS

D

DONG ENERGYDevelopment, construction, and operation of wind farms

Kraftværksvej 53, 7000 Frédéricia, Danemark+45 99 55 11 11

www.dongenergy.dk [email protected]

ORGANIZATION

DONG Energy is one of the largest energy companies in Northern Europe. It has over 30 years of experience in wind power, including 20 in developing, constructing and operating offshore wind farms. The company owns offshore and onshore farms throughout Europe. Fifteen per cent of the energy produced by DONG Energy comes from wind power.

ACTIVITIES

As a seasoned player, DONG Energy has built more offshore wind farms than any other company in the world. In 2010, it commissioned the offshore wind farm Gunfleet Sands (172 MW) off the coast of Britain. In early 2011, DONG Energy and its partners began the construction of the offshore wind farm London Array. With 175 wind turbines with individual capacities of 3.6 MW (for 630 MW of rated power), London Array will be the largest offshore wind farm in the world. At the end of 2010, the total capacity of DONG Energy’s onshore and offshore wind farms in service was 1,035 MW. The capacity of its farms under construction was 1,316 MW. DONG Energy plays an active role in all phases of a project. As a developer, builder, and operator of offshore wind farms, the company has extremely extensive experience that surpasses the competition. Its involvement in all phases of projects has enabled it acquire the knowledge that is of such importance for the development and optimisation of new wind farms.

LOCATIONS

Denmark.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SSU

PPLI

ERS


DEV

ELO

PER

S/O

PER

ATO

RS

E

E.ONMulti-energy operator

5 rue d’Athènes, 75009 Paris+33 (0)1 44 63 39 98

www.eon.fr [email protected]

ORGANIZATION

E.ON France has its head office in Paris and handles all of E.ON’s activities in France (production, sales and renewable energy). Founded in 2000, the E.ON group is a world specialist in energy solutions. Renewable energy is an integral part of its strategy for cleaner, more efficient power. Over the next five years, E.ON intends to invest €7 billion in renewable energy.

ACTIVITIES

E.ON France is well-established and is the third largest multienergy operator in France. It supplies gas and electricity and produces electricity and has more than 3.2 GW of production capacity (coal, gas, wind, and solar). Benefitting from the know-how of the pioneer group in renewable energy, E.ON France has structured its expertise around the creation of production installations (development, construction, operation, and maintenance) and managing energy produced.

LOCATIONS

Île-de-France.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SSU

PPLI

ERS


DEV

ELO

PER

S/O

PER

ATO

RS

E

ECO DELTAWind farm development

420 rue des Mattes - ZI ATHELIA 1 - Bat C, 13705 La Ciotat cedex+33 (0)4 42 01 65 80 +33 (0)4 42 82 31 47

www.ecodd.com [email protected]

ORGANIZATION

A ‘société anonyme’ (limited liability company) with executive and supervisory boards. €1,743,339 in capital. 17 employees.

ACTIVITIES

• Two types of energy: wind and solarMany projects feature solar and wind power at the same site• Specialised in large projectsAverage size of 20 MW for wind and 8 MWp for solar• Strong presence in the southeast of FranceAs well as the Central/Île-de-France area and the eastern portion

LOCATIONS


PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SSU

PPLI

ERS


DEV

ELO

PER

S/O

PER

ATO

RS

E

ECOTERA DEVELOPPEMENT SASDevelopment, construction, and operation of wind farms

521 boulevard du Président Hoover - Le Polychrome, 59000 Lille+33 (0)3 20 37 60 31 +33 (0)3 20 13 96 02

[email protected]

ORGANIZATION

Engineering office. 6 employees: 3 engineers, 2 technicians.

ACTIVITIES

Wind, biomass, hydroelectric.

LOCATIONS

Nord-Pas de Calais.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SSU

PPLI

ERS


DEV

ELO

PER

S/O

PER

ATO

RS

E

EDF ENERGIES NOUVELLESProducer of green energy

100 esplanade du Général de Gaulle - Cœur DéfenseTour B, 92932 Paris La Défense cedex

+33 (0)1 40 90 23 00 +33 (0)1 40 90 23 66www.edf-energies-nouvelles.com www.edf-en.fr

ORGANIZATION

EDF Energies Nouvelles is a major player in the renewable energy sector. It focuses mainly on wind power (which represents 87% of its installed capacity) and photovoltaic power, but also works on other renewable energy, including offshore wind power, marine energy, biomass, biofuel, and biogas. The company is an end-to-end industrial operator, acting as a developer, constructor, investor/owner, and power plant operator.

ACTIVITIES

EDF Energies Nouvelles does everything from initiate wind and solar power projects to sell electricity, including:• Selecting sites and conducting technical feasibility studies (evaluating resources, measuring wind and sun, etc.)• Analysing impact on the local area and natural environment (measuring noise levels, running landscape simulations, etc.)• Working with administrative bodies, studying power grid connections, applying for construction permits, organising financing, and engineering and construction• Providing operation and maintenance services through its European subsidiary EDF EN Services.

LOCATIONS

Île-de-France.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SSU

PPLI

ERS


DEV

ELO

PER

S/O

PER

ATO

RS

E

ELECTRAWINDS Development, execution and operation of wind farm projects

30 boulevard Pasteur, 75015 Paris+33 (0)6 09 98 04 17

[email protected]

ORGANIZATION

Electrawinds France SAS is the French branch of Belge Electrawinds. It produces green energy from wind turbines, biomass plants, and solar power plants. The company develops, constructs and operates its projects and currently operates a rated power of nearly 200 MW. It has offices in Paris and Bordeaux.

ACTIVITIES

Electrawinds specialises first and foremost in developing, executing, and operating wind farm projects. It makes equity investments in its projects, giving it complete control over project finances and allowing local residents to invest in projects in the form of bonds. In Belgium, Electrawinds is a major offshore wind energy player and has been granted four leases in partnership. It is developing wood cogeneration projects from the CRE 2 and CRE 3 calls for tenders. Work on the first project began in October 2013.

LOCATIONS

Île-de-France, Aquitaine.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SSU

PPLI

ERS


DEV

ELO

PER

S/O

PER

ATO

RS

E

ENEL GREEN POWER FRANCEDevelopment, construction, financing, and operation of renewable energy projects

Immeuble Le Bonnel - 20 rue de la Villette, 69328 Lyon+33 (0)4 78 92 68 70 +33 (0)4 78 42 03 44

www.enelgreenpower.com [email protected]

ORGANIZATION

Enel Green Power France is the French renewable energy operator of the Enel energy group, one of Europe’s top electricity producers. Enel Green Power is the ENEL group company dedicated to developing and managing projects generating electricity from renewable sources in Italy and around the world. It has an installed capacity of over 8,000 MW in wind, hydroelectric, solar, geothermic, and biomass power in 16 countries in Europe and the Americas.

ACTIVITIES

Enel Green Power France specialises in designing, developing, financing, building, and operating renewable energy production. ENEL GREEN POWER FRANCE possesses acknowledged expertise enabling it to successfully complete renewable energy projects from exploration to operation.

LOCATIONS

Rhône-Alpes.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SSU

PPLI

ERS


DEV

ELO

PER

S/O

PER

ATO

RS

E

ENERTRAGDevelopment, financing, construction, and operation of wind farms

Cap Cergy - Bâtiment B - 4-6 rue des Chauffours, 95015 Cergy Pontoise cedex+33 (0)1 30 30 60 09 +33 (0)1 30 30 52 57www.enertrag.fr [email protected]

ORGANIZATION

ENERTRAG AG Etablissement France is the French arm of the German group ENERTRAG AG, created in 1998. It is one of the biggest producers of clean energy in Europe, with around 440 employees in several European countries. The company has 35 employees in France and operates in most of the country.

ACTIVITIES

ENERTRAG intervenes at all stages of the life-cycle of a wind farm project, from the initial ideas to feeding into the grid. The group develops, finances, builds, and operates its installations, and offers a wide range of operation and maintenance services. ENERTRAG sells the ENERTRAG Powersystem, a management system for farms in operation, as well as its own aircraft warning light system from the EST range.

LOCATIONS

Île-de-France.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SSU

PPLI

ERS


DEV

ELO

PER

S/O

PER

ATO

RS

E

ENERYODevelopment and operation of renewable energy projects

94 rue Saint-Lazare, 75009 Paris+33 (0)1 49 70 95 30 +33 (0)1 49 70 85 20

www.eneryo.com [email protected]

ORGANIZATION

Eneryo is run by a team of professionals with extensive experience and expertise in the renewable energy sector. The company has around ten employees. Eneryo manages the development, project ownership, financing, and operation of renewable energy projects. The company has significant investment capacity, allowing it to undertake large-scale projects. Eneryo develops, constructs and operates projects involving solar power (panels mounted on buildings and on the ground), wind power, and biomass.

ACTIVITIES

A producer of green energy, Eneryo is a developer, investor/owner, and operator of power plants. Its main areas of development are photovoltaic and wind power. Eneryo’s growth is mainly based on developing its own projects, as well as by acquiring others.

LOCATIONS

Île-de-France.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SSU

PPLI

ERS


DEV

ELO

PER

S/O

PER

ATO

RS

E

EOLE AVENIR DEVELOPPEMENTCo-development, acquisition, financing, construction, and operation of wind farms

52 rue d’Aguesseau, 92100 Boulogne-Billancourt+33 (0)1 41 31 21 72 +33 (0)1 41 31 21 41www.eole-avenir.com [email protected]

ACTIVITIES

Eole Avenir Développement is an independent company which was founded for individuals wanting to invest in renewable energy development and specifically in wind energy. The company’s four founders combined their expertise in wind power technology and financial engineering to open up the industry’s profits to more than just large corporations. Eole Avenir Développement is the first company in France that offer individuals the chance to participate in wind farm development in partnership with industry experts. How it works: Although wind farms are part of a French and European renewable energy objective, the creation of a wind farm is first and foremost a local project resulting from local discussions and decision-making. Eole Avenir Développement has based its strategy on this observation, allowing local players to take a central role in the development of the projects it is managing. To develop projects in a manner consistent with this strategy, Eole Avenir Développement receives help from expert companies located near project sites. Objectives: Eole Avenir Développement is developing a portfolio of wind farms with a total potential of 300 MW and a portfolio of solar power plants with a total potential of 50 MWp. The company has set itself the goal of putting at least 100 MW online by 2013. Locations: On 1 January 2010, the company’s portfolio of wind farms was constituted of wind farms throughout France (Midi-Pyrénées, Brittany, Auvergne, Basse-Normandie, Picardy, Nord-Pas de Calais, Languedoc-Roussillon, and Rhône-Alpes) and in Eastern Europe. The team: Eole Avenir Développement has four founding partners who run the company and sit on the board of directors. The partners work in pairs due to their respective skills and experience: • Jean-Pierre Dubouchet and Christian Ravion are in charge of relations with private individual investors and manage the company• Pascal Berlu and Damien Borot are in charge of the company’s strategy, the development of financial engineering projects, and the management of these wind farms.

LOCATIONS

Île-de-France.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SSU

PPLI

ERS


DEV

ELO

PER

S/O

PER

ATO

RS

E

EOLFIWind and solar project development

25 place de la Madeleine, 75008 Paris+33 (0)1 40 07 95 00 +33 (0)1 40 07 95 06

www.eolfi.com [email protected]

ORGANIZATION

Founded in 2004, Eolfi has offices in France, Greece, and Poland and is the project development subsidiary of the Asah Lm group, an independent company specialising in wind power. Based in Paris, Asah Lm covers the entire renewable energy value chain through its four areas of activity: • The development of onshore wind farms and solar power plants: EOLFI• Assets management: EAM, the first management company in France specialising in wind power infrastructures• Design of floating vertical-axis wind turbines: SPINFLOAT• Design and development of projects for underwater compressed air energy storage (UW-CAES): AGNES.Operating through their joint subsidiary, Eolfi, Asah Lm was Veolia’s exclusive partner for wind power until 2013, when Asah Lm took back full control of Eolfi.

LOCATIONS

Île-de-France.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SSU

PPLI

ERS


DEV

ELO

PER

S/O

PER

ATO

RS

E

EPURON SASDevelopment and operation of wind farm projects

9 avenue de Paris, 94300 Vincennes+33 (0)1 41 74 70 40 +33 (0)1 41 74 70 41

www.epuron.fr [email protected]

ORGANIZATION

EPURON is a European leader in wind farm project development in France. Already well-established in France, EPURON is dedicated to consolidating its presence by expanding its project development, acquisition and construction, and project development activities. Since the end of 2010, EPURON has been owned by Impax Asset Management Ltd., an investment fund based in London specialising in renewable energy. EPURON has significant investment capacity and has become a participant in its own right in France’s wind power sector, acting as a project developer, constructor and producer of clean energy.

ACTIVITIES

Epuron develops projects from start to finish, from identifying suitable sites to operating sites and reselling electricity. Thanks to its expertise and an international network of skills, the company has acquired the knowledge it requires to execute all stages of wind farm projects. Since 1998, Epuron has been committed to providing unbeatable service as a personal advisor to government officials and bodies, landowners, and farmers. To do this, it has cultivated a strong culture of discussion and consensus, resulting in a climate of trust where the stakeholders can express themselves.

LOCATIONS

Île-de-France.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SSU

PPLI

ERS


DEV

ELO

PER

S/O

PER

ATO

RS

E

EUROCAPE NEW ENERGY FRANCEDevelopment, acquisition, construction, and operation of wind farms

770 rue Alfred Nobel, 34000 Montpellier+33 (0)4 27 04 50 49 +33 (0)4 67 99 61 82

www.eurocape.eu

ORGANIZATION

EuroCape New Energy France is an SARL (limited liability company) with its headquarters and main office at 75 boulevard Haussmann in the 8th arrondissement in Paris, and a secondary operational office at 770 rue Alfred Nobel in Montpellier, France. It is the French subsidiary of the international EuroCape New Energy group. EuroCape New Energy France uses its technical expertise to underpin its strong commitment to the development of renewable energy for its public and private institutional partners.

ACTIVITIES

EuroCape New Energy France specialises in the development, acquisition, construction and operation of wind farms in France.

LOCATIONS

Languedoc-Roussillon.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SSU

PPLI

ERS


DEV

ELO

PER

S/O

PER

ATO

RS

F

FALCK ENERGIES RENOUVELABLESDevelopment, financing, construction, and operation of wind farms

5 rue Jean Macé, 35700 Rennes+33 (0)2 23 45 06 99 +33 (0)2 23 45 06 21

www.falckrenewables.eu

ORGANIZATION

Falck Energies Renouvelables is the French subsidiary of Falck Renewables SpA, a European leader in the energy production exclusively from renewable sources.

ACTIVITIES

Development, financing, construction, and operation

LOCATIONS

Brittany.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SSU

PPLI

ERS


DEV

ELO

PER

S/O

PER

ATO

RS

G

GDF SUEZEnergy producer

1 place Samuel de Champlain - Faubourg de l’Arche, 92930 Paris La Défense cedex+33 (0)1 44 22 39 94 +33 (0)1 44 22 26 11

gdfsuez.com [email protected]

ORGANIZATION

As the world’s leading independent producer of energy, GDF SUEZ’s mission is to satisfy energy needs, ensure the security of the supply, fight climate change and optimise the use of resources. Renewable energy subsidiaries and affiliates in France:• Wind power: Futures Energies SARL, La Compagnie du Vent, Maïa Eolis, CN’Air• Photovoltaic/thermal power: Clipsol, Energia, Panosol, Futures Energies SARL, La Compagnie du Vent, CN’Air, Inéo• Biomass: Cofely

ACTIVITIES

Control of the entire energy chain: • Electricity: production, sale, trade and marketing, transmission and distribution networks, infrastructure design and construction• Natural Gas and LNG: purchase, production and marketing, exploration/production, distribution networks, transportation infrastructure, storage, methane terminals• Energy Services: on-site management of urban power and utilities grids, design and construction of installations, a portfolio of multi-technical services, energy services• Environment: water and sanitation services, water treatment engineering, cleaning services

LOCATIONS

Île-de-France.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SSU

PPLI

ERS


DEV

ELO

PER

S/O

PER

ATO

RS

X

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SSU

PPLI

ERS


DEV

ELO

PER

S/O

PER

ATO

RS

X

© E

NERTR

AG

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SSU

PPLI

ERS


DEV

ELO

PER

S/O

PER

ATO

RS

G

GEG ENERGIES NOUVELLES ET RENOUVELABLESDevelopment and operation of wind farms

17 rue de la Frise - BP 183, 38042 Grenoble cedex 9+33 (0)4 76 84 89 21

[email protected]

ACTIVITIES

GEG ENeR is the renewable energy production subsidiary of the Gaz Electricité Grenoble group (GEG SAEML), a local energy company. It owns 11 hydroelectric plants, one wind farm, 18 photovoltaic power plants, and a dozen small gas cogeneration plants that it operates mostly with its own personnel. GEG ENeR’s project team works on development with the backing of the Caisse des Dépôts et Consignations and/or partners from all the hydroelectric, wind power, photovoltaic power, biogas and cogeneration sectors.

LOCATIONS

Rhône-Alpes.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SSU

PPLI

ERS


DEV

ELO

PER

S/O

PER

ATO

RS

G

GEOLISDevelopment and construction of wind farms

VCF OUEST - BP 46, 44220 Coueron+33 (0)2 51 11 25 79 +33 (0)2 51 11 28 48

www.geolis.eu [email protected]

ORGANIZATION

With its extensive experience in wind farm construction, VINCI Construction France embarked on the development of projects with the launch of the Geolis brand. Geolis uses its expertise to provide assistance to executive directors of VINCI Construction France. With nearly 400 locations in France, projects are overseen by local companies.

ACTIVITIES

Wind power: Geolis’ expertise ranges from identifying suitable sites to constructing wind farms.

LOCATIONS

Pays de la Loire.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SSU

PPLI

ERS


DEV

ELO

PER

S/O

PER

ATO

RS

G

GLOBAL WIND POWER FRANCE SUBSIDIARY OF GLOBAL WIND POWER EUROPE A/S-

Wind projects development

15 rue Jean Jaurès, 92800 Puteaux+33 (0)1 73 00 67 85 +33 (0)1 73 00 67 99

www.globalwindpower.fr [email protected]

ORGANIZATION

In 2009, the French company “Vent Invest”, wind energy project developer since 2002, became Global Wind Power France, a subsidiary of the Danish company Global Wind Power Europe A / S, specialised in the development, the implementation and the management of wind investment projects since 1999.Global Wind Power now has 8 employees in France and 40 in the group. Since its creation, Global Wind Power has participated in the implementation of 610 MW throughout Europe and carries on the development of a 600 MW pipeline, including 200 MW in France.In France, Global Wind Power built in 2010 the first public park (8 MW) of France, in Montdidier (Somme - 80), and is in charge of the technical and commercial management since then.

ACTIVITIES

• Development of wind projects (Greenfield)• Acquisition of wind projects with partners• Construction and implementation of wind projects (Turnkey and semi-turnkey)• Sale of wind projects and running farms - Global Wind Power is not a producer of electricity• Technical and commercial management of wind projects

LOCATIONS

Located in Puteaux, the team is focused on the northern half of France. 22 MW are under construction and 40 MW under instruction in Champagne-Ardenne, 8 MW have recently started to produce in Pas-de-Calais.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SSU

PPLI

ERS


DEV

ELO

PER

S/O

PER

ATO

RS

H

HYSEODevelopment of renewable energy projects

5 rue Paule Raymondis, 31200 Toulouse+33 (0)5 61 20 16 92 +33 (0)5 61 20 60 85

www.hyseo.fr [email protected]

ACTIVITIES

Development of renewable energy projects.

LOCATIONS

Midi-Pyrénées.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SSU

PPLI

ERS


DEV

ELO

PER

S/O

PER

ATO

RS

I

IDEX SASDevelopment of renewable energy projectsDevelopmp ent of renewable energgy y prp ojjects

8 rue Escudier, 92513 Boulogne-Billancourt cedex+33 (0)1 47 12 44 71 +33 (0)1 47 12 42 65 www.idex-groupe.com

ORGANIZATION

Headquartered in Boulogne-Billancourt, Idex is France’s leading independent operator in energy and environmental services. For more than 30 years, Idex has firmly established its activity in business related to renewable energy by performing major operations in diverse sectors: • Construction of the first WIND farm in France (Port-La-Nouvelle in 1992)• GEOTHERMAL power plants providing urban heating (Le Mee/Seine in 1980)• Anaerobic METHANISATION of household waste (Amiens in 1992)• Multiple operations in WOOD and SOLAR thermal energy• Regional and agricultural methanisation (Géotexia in Saint-Gilles-du-Mené)Idex has formed teams that specialise in setting up renewable energy projects and work closely with the 54 agencies throughout France. The teams offer fixed-term guarantees regarding the performance of installations through maintenance contracts and operation of the sites and/or projects developed.

ACTIVITIES

Idex works in the fields of:• Wind power• Wood energy• Waste recovery• Photovoltaic and solar thermal energy• Energy and cogeneration optimisation.Idex is a unique operator in that it is active at all stages of the project, including:• Feasibility studies and expert assessment• Financial and legal engineering• Leading and/or executing construction projects• Managing the completed structures• Technical operation with guarantee of results. Idex serves a wide range of clients:• Local authority and public project owners• Farmers associations• Public and private industrialists• Investors.

LOCATIONS

Île-de-France.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SSU

PPLI

ERS


DEV

ELO

PER

S/O

PER

ATO

RS

I

INITIATIVES & ENERGIES LOCALESInstaller and producer of renewable energy

41 ter boulevard Carnot, 22000 Saint-Brieuc+33 (0)2 30 96 02 21 +33 (0)2 96 01 99 69www.iel-energie.com [email protected]

ORGANIZATION

Founded in January 2004, IEL is an independent group specialising in the development, installation, and operation of renewable energy projects. Based in Saint-Brieuc in France in a low-energy-consumption building, IEL has 30 employees and is continuing its controlled growth.Since it was founded, IEL has developed more than 70 MW in wind power, 50 MW of which is currently in operation. The company is continuing its wind energy activities with studies concerning a portfolio of more than 200 MW in advanced projects. Backed by its extensive experience in wind power, IEL also develops solar power projects with panels mounted both on buildings and on the ground with a view to operating them. Almost 100 MW of solar power is currently in development in the Grand Ouest area of France.Since 2007, IEL has been designing, installing, and maintaining solar power plants mounted on buildings for industrial clients, farmers and local authorities Working through its subsidiary, IEL Etudes & Installations, IEL has become one of the main players in the photovoltaic power sector in the Grand Ouest area and is an acknowledged expert in the field. IEL remains true to its philosophy by working exclusively with European manufacturers.IEL has been working as a producer of electricity since 2008 through its subsidiary, IEL Exploitation. Its operations portfolio currently contains 4.5 MW of wind power and 2 MW of solar power. The company will launch a number of other production units in 2013 and 2014.IEL has been working in the methanisation sector since 2011, in partnership with Odipure. This partnership, formalised by IEL’s majority involvement in the capital of Odipure, develops and operates methanisation projects, allowing the recycling of waste from agriculture, the food industry, and local authorities.

ACTIVITIES

In the wind power industry, IEL conducts studies prior to obtaining construction permits, finances construction projects, oversees their installation, and handles their operation. IEL is involved throughout all the phases of the project life-cycle with multidisciplinary development teams, teams of project financing specialists, and an operations centre. A single contact today and tomorrow for the local elected officials: IEL.

LOCATIONS

IEL South Loire1 rue de la Belle Allée - 85290 Mortagne-sur-Sèvre - FranceTel.: 09 67 21 31 62

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SSU

PPLI

ERS


DEV

ELO

PER

S/O

PER

ATO

RS

J

JMA ENERGIESDevelopment and operation of wind farms and photovoltaic power installations

Corn-Ar-Hoat, 29150 Cast+33 (0)2 98 16 12 60 +33 (0)2 98 16 12 60

[email protected]

ORGANIZATION

Family business working in development and operation.

ACTIVITIES

Development and operation of wind farms and photovoltaic power plants.

LOCATIONS

Brittany.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SSU

PPLI

ERS


DEV

ELO

PER

S/O

PER

ATO

RS

J

JP ENERGIE ENVIRONNEMENTCreator of renewable energy

57 rue de la Chaussée d’Antin, 75009 Paris+33 (0)1 44 50 55 47 +33 (0)1 44 50 55 46

www.jpee.fr [email protected]

ORGANIZATION

SAS (Simplified private limited company) with capital of €1,245,000.

ACTIVITIES

JP Energie Environnement develops, finances, builds, and operates power plants that produce electricity from all types of renewable sources, including wind, photovoltaic, hydroelectric and biomass. In 2013, JPEE was operating 6 wind farms and 53 photovoltaic power plants, for a total of 94 MW in installed power, enough to power around 56,000 homes. More new farms will be built this year which will double JPEE’s installed power. JPEE’s projects are mainly financed by private investors. To date, more than 2,000 shareholders have already entrusted their renewable energy investments to JPEE.

LOCATIONS

Head office: CaenEngineering offices: ParisSatellite offices: Le Mans, Nantes

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SSU

PPLI

ERS


DEV

ELO

PER

S/O

PER

ATO

RS

L

LA COMPAGNIE DU VENT SUBSIDIARY OF GDF SUEZ GROUP-

Production of electricity using wind and photovoltaic power

Le Triade II - Parc d’activités Millénaire II, 215, rue Samuel MorseCS 20756, 34967 Montpellier cedex 2

+33 (0)4 99 52 64 70 +33 (0)4 99 52 64 71www.compagnieduvent.com

ORGANIZATION

La Compagnie du Vent, part of the GDF SUEZ group, had 143 employees in 2013. It has installed and currently operates 23 wind farms and 2 photovoltaic power plants.

ACTIVITIES

A wind energy pioneer in France, today La Compagnie du Vent is one of the leading players in renewable energy. At end 2013, it was behind more than 30 installations (wind and photovoltaic) in operation or construction in France and Morocco, for rated power of nearly 400 MW. The company also initiated the offshore wind farm project ‘Deux Côtes’ off the Somme and Seine-Maritime coast and is working on the project in conjunction with GDF SUEZ. La Compagnie du Vent has undertaken a promising diversification into solar power with the operation of the largest photovoltaic tracker power plant in France (Porette de Nérone in Corsica) and has seven projects under way, for a rated power of 66 MWp. Key numbers: • 23 wind farms installed in France and 2 in Morocco, and 2 photovoltaic power plants in France• Rated power: 359 MW (in France and Morocco), of which 63 MW are project managed• Number of wind turbines: 299 (in France and Morocco), of which 99 are project managed• Production in 2012 (in France): approximately 500 million kWh, or enough electricity for almost 280,000 people (source: RTE 2011 - excluding heating) • Turnover in 2012: €42.7 millions • Capital: €13,872,375.

LOCATIONS

Head office in Montpellier, Languedoc-Roussillon.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SSU

PPLI

ERS


DEV

ELO

PER

S/O

PER

ATO

RS

M

MAÏA EOLISWind power professionals

Tour de Lille - Boulevard de Turin, 59777 Lille+33 (0)3 20 214 214 +33 (0)3 20 131 231

www.maiaeolis.fr [email protected]

ORGANIZATION

Maïa Eolis, a subsidiary of the Maïa group, owns owned at 49% by GDF SUEZ. Founded in 2006, it has a capital of €230,040,000 and develops, constructs, operates, and manages the maintenance of its wind farms in France.

ACTIVITIES

Maïa Eolis has around 60 employees, engineers, and technicians based in Lille and Lyon and at our maintenance centres in Picardy and Lorraine developing and operating wind farms in France. We are your sole contact, covering all the stages of the life-cycle of a wind farm project: studies and development, financing, construction, operation, and maintenance services for our wind farms.

LOCATIONS

Nord-Pas de Calais.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SSU

PPLI

ERS


DEV

ELO

PER

S/O

PER

ATO

RS

N

NASS&WIND SAS Our regions need all our energy sources

1 rue Etienne d’Orves - Base de Keroman, 56100 Lorient +33 (0)2 97 37 56 06+33 (0)2 97 37 56 54 www.nass-et-wind.com [email protected]

ORGANIZATION

Founded by Peter Nass and Nathalie Le Meur in Morbihan, France in 2001, Nass&Wind is today one of the leaders in renewable energy development in France. Nass&Wind’s subsidiaries develop renewable energy projects across France (e.g. offshore wind energy, photovoltaic power, and wood energy), from exploring potential sites to operating them, including financing and building power plants. The company’s reputation hinges in particular on the quality of its environmental and technical surveys, the importance it places on consultation, the involvement of local players in the development and finalisation of projects, and the relevance of the technical and financial arrangements. Nass&Wind is an independent French group with capital of €40 million. It is located in Lorient (Morbihan) and has about 40 employees.

ACTIVITIES

1. In 2012, Nass&Wind Offshore was a joint winner–along with EDF EN, DONG Energy, and Alstom–in the first call for tenders for the installation of offshore wind farms. Currently, the company is working on several offshore wind farm projects off the coast of France (in the Atlantic, English Channel, and North Sea), thereby contributing to national and regional energy production goals. 2. Nass&Wind Industrie offers an extensive range of engineering services for offshore wind farms and is leading the Winflo floating offshore wind turbine project launched in 2007 in close partnership with DCNS, and with the help of IFREMER and ENSTA Bretagne. The aim of this project is to design, industrialisation, and sell an innovative, multi-megawatt floating offshore wind turbine system that is effective from a depth of 50 metres. A demonstration model will be launched in 2013 off the coast of France. A pilot farm with several machines will be installed in 2016, paving the way for the installation of an initial commercial farm, which will be operational by 2020. Production ramp-up will create several thousand jobs in France. The project was certified by the Mer Bretagne competitiveness cluster in 2008 and has received support from ADEME as a future investment. 3. The group’s other subsidiaries are dedicated to acquiring and operating photovoltaic power plants (Nass&Wind Invest) and forests (Nass&Wind Forêts), and using global solutions to help local authorities and professionals finance, build, and operate wood boilers to produce heat or heat and electricity (Nass&Wind Bois Energie).

LOCATIONS

Brittany.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SSU

PPLI

ERS


DEV

ELO

PER

S/O

PER

ATO

RS

N

NEOENEnergy producer

Tour Maine Montparnasse - BP 108 - 33 avenue du Maine, 75775 Paris cedex 15+33 (0)805 160 022 +33 (0)1 70 91 62 20

www.neoen.com [email protected]

ORGANIZATION

neonen develops, finances, constructs and operates green energy power plants such as wind farms (onshore and offshore), solar power plants, and biomass units. neonen’s goal is to become one of the top five independent producers of green energy in France. Present in France and Portugal, neonen is striving for a diversified, complementary portfolio of 1,000 MW in assets by 2016. It is breaking into high-potential markets in Central America, North America, Africa, and Australia.

ACTIVITIES

neonen performs all the stages of power plant projects, from development, financing, and construction to operation and dismantlement. To develop its production infrastructures, neonen is turning to farmers, local authorities and businesses, offering them flexible solutions adapted to local areas. neonen helps its clients understand the main issues linked to projects and guides them through the administrative processes required to successfully complete these projects.

LOCATIONS

Île-de-France.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SSU

PPLI

ERS


DEV

ELO

PER

S/O

PER

ATO

RS

N

NOUVERGIESDevelopment and operation of wind farms

21a boulevard Jean Monnet, 94357 Villiers-sur-Marne+33 (0)1 77 61 55 60 +33 (0)1 77 61 55 03

www.nouvergies.com [email protected]

ORGANIZATION

Nouvergies: Operation of wind farms in Haute-Normandie and Brittany, and development in France.

ACTIVITIES

Nouvergies was founded in 1999. It is committed to developing and supporting new projects that address current issues concerning the control of energy consumption and the use of resources that do not emit greenhouse gases. Its projects have a regional focus and aim to contribute to local development to meet residents’ environmental, social, and economic expectations. After acquiring the Goulien and Assigny wind farms in 1998 and 2005, the company’s teams assisted with the commissioning of the Trémeheuc wind farm in Ille-et-Vilaine (2 MW 6xV90). With 10 years of experience in the wind power sector throughout France, Nouvergies is continuing its growth as an independent developer. Its teams assist local authorities and landowners in the design of high-quality, participatory projects that comply with regulations, promote the region’s development, and are environmentally-friendly.

LOCATIONS

Île-de-France.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SSU

PPLI

ERS


DEV

ELO

PER

S/O

PER

ATO

RS

O

OSTWIND INTERNATIONAL SUBSIDIARY OF OSTWIND AG-

Development, design, construction, and operation of wind farms

1 rue de Berne - Espace Européen de l’Entreprise, 67300 Schiltigheim+33 (0)3 90 22 73 40 +33 (0)3 90 20 09 48

www.ostwind.fr [email protected]

ORGANIZATION

The OSTWIND group, located in Ratisbonne, Germany, is an independent family business that operates throughout Europe via a team of around a hundred employees. Its French subsidiaries, OSTWIND International and OSTWIND Engineering, employ more than 30 people across seven sites.

ACTIVITIES

OSTWIND develops, designs, builds, and operates wind farms. The company is involved in every step of the execution of a wind farm project. Its strength lies in its thorough understanding of all the parameters necessary to design wind farms that reflect their region: preliminary investigations, an analysis of constraints, coordination of studies consultations, authorisation procedures, the design stage, legal and financial arrangements, construction, project management and operation.OSTWIND also produces electricity. It owns 32 MW out of the 235 MW currently available in France.

LOCATIONS

In addition to its engineering office near Strasbourg, OSTWIND International has six local offices: • in Fruges, Toulouse, Tours, Amiens, and Lyon for development• in Tincques for operations.Between 1999 and 2013, OSTWIND connected wind farms in the following areas:• Ardèche (Saint Clément, 1.2 MW)• Pas-de-Calais (Canton de Fruges Communauté de Communes (joint local authorities), 140 MW; Atrébatie Communauté de Communes, 54 MW),• Basse-Normandie (Saint-Jacques-de-Néhou, 10 MW)• Meurthe-et-Moselle (Deux Rivières Communauté de Communes, 30 MW).

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SSU

PPLI

ERS


DEV

ELO

PER

S/O

PER

ATO

RS

Q

QUADRAN (JMB énergie + Aérowatt) Free energy, developer, builder, and operator of renewable energy power plants

Domaine de Patau, 34420 Villeneuve-les-Béziers+33 (0)4 67 26 61 28 +33 (0)4 67 01 32 97

www.quadran.fr [email protected]

ORGANIZATION

Quadran is one of the leading independent integrated producers of renewable energy (wind power, photovoltaic power, hydroelectricity, and biogas/biomass) in France and abroad. Quadran was formed by the merger of JMB Energie and Aérowatt on June 30, 2013. Since then, it has drawn on the combined experience and undeniable expertise of each company. From its knowledge of wind resources (through its subsidiary Winergy) to the production of electricity (with 136 power plants in operation), Quadran is a fully-integrated group. Quadran is an independent company backed by specialised financial partners (Demeter, IRPAC, and SORIDEC).

ACTIVITIES

The Quadran group is involved in all the stages of the life-cycle of a power plant: the search for sites and the administrative processes, wind studies, technical studies, searching for financing, construction, operation, sale of electricity and dismantling.

LOCATIONS


PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SSU

PPLI

ERS


DEV

ELO

PER

S/O

PER

ATO

RS

S

SAINT-LAURENT ÉNERGIEHydroelectric, wind and photovoltaic operation

2 rue du Char d’Argent, 88000 Epinal+33 (0)3 29 64 14 46 +33 (0)3 29 32 31 12

[email protected]

ORGANIZATION

Saint Laurent Energie is a holding composed of 14 companies. Saint Laurent Energie develops and operates hydroelectric and photovoltaic power plants and wind farms.

ACTIVITIES

Saint Laurent Energie SNC started out in 1984 working in renewable energy and hydroelectric plants. It had six power plants in operation with a capacity of 10 MW and an annual turnover of €2 million. In 2003, the company made its wind power debut, acquiring several wind farms under development in partnerships. The company is also developing photovoltaic power plants.

LOCATIONS

Lorraine.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SSU

PPLI

ERS


DEV

ELO

PER

S/O

PER

ATO

RS

S

SAMEOLE Producer of wind energy

rue du Poirier, 14650 Carpiquet+33 (0)2 31 29 20 00 +33 (0)2 31 29 20 09

www.sameole.fr [email protected]

ORGANIZATION

Developer, investor, and operator of wind farms.

ACTIVITIES

• Development of wind farm projects• Arranging of financing• Project management services• Technical management for wind turbine construction sites• Supervision, maintenance and management of wind farms.Wind farms in operation for 75 MW:• SAUCOURT (Somme)• MEAUTIS-AUVERS (Manche)• MAISNIERES (Somme)• PITHIVIERS (Loiret)• GUEHENNO (Morbihan)• BAZOCHES (Loiret)• ST-MARTIN-DE-CRAU (Bouches-du-Rhône)• PLOUISY (Côtes-d’Armor)Seven wind farms with a projected total of 104 MW.Over 100 MW in development.

LOCATIONS

Lower Normandy.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SSU

PPLI

ERS


DEV

ELO

PER

S/O

PER

ATO

RS

S

SERGIESDevelopment, financing, construction, and operation of wind farms and photovoltaic

power plants

78 avenue Jacques Cœur - CS 10000, 86068 Poitiers cedex 9+33 (0)5 49 44 79 42 +33 (0)5 49 60 54 30

www.sergies.fr [email protected]

ORGANIZATION

Founded in 2001, SERGIES is a Société d’Economie Mixte Local (semi-public company) with executive and supervisory boards. Eighty-five per cent of its €10,100,010 in capital is held by the Syndicat Intercommunal d’Electricité et d’Equipement of the Vienne ‘département’ (Syndicat ENERGIES VIENNE), and fifteen per cent by institutional partners.

ACTIVITIES

In response to the expectations of the 265 communes which are members of the Syndicat ENERGIES VIENNE, SERGIES is positioned as a local public investor committed to the carefully planned and controlled development of its projects. SERGIES owns the largest wind farm (12 wind turbines) in Vienne. The farm is currently under construction in the communes of St-Macoux, Lizant, St-Gaudent, and Voulême. SERGIES has also built the largest photovoltaic surfaces in Vienne, with more than 150,000 m2 of roofing covered by photovoltaic panels so far. It has also worked in bioenergy (landfill gas, methanisation) and in promoting the control of the energy demand.

LOCATIONS

Poitou-Charentes.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SSU

PPLI

ERS


DEV

ELO

PER

S/O

PER

ATO

RS

S

STATKRAFT FRANCE SASEuropean leader in renewable energy

Cité Internationale de Lyon - 66 quai Charles de Gaulle, 69463 Lyon cedex 06+33 (0)4 78 94 94 86 +33 (0)4 78 94 94 87

www.statkraft.fr [email protected]

ORGANIZATION

Statkraft’s sole shareholder is the Norwegian government. The company was founded in 1895 when a waterfall was acquired for the purpose of producing electricity.

ACTIVITIES

Statkraft is a leading producer of hydroelectricity in Norway, Sweden, Finland, Germany, and the United Kingdom. It has a rated power of 16,430 MW, including 13,000 MW of hydroelectricity. Statkraft also produces power from onshore and offshore wind farms and owns several biomass production plants.

LOCATIONS

Rhône-Alpes.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SSU

PPLI

ERS


DEV

ELO

PER

S/O

PER

ATO

RS

S

SOFIVA ENERGIEIndependent engineering office specialising in renewable energy

Route de Montélimar - BP 70 - Parc d’activités commerciales du Moulon, 07202 Aubenas cedex +33 (0)4 75 35 40 41 +33 (0)4 75 93 35 52

[email protected]

ORGANIZATION

The activity covers everything from construction to operation. The office works exclusively with energy engineers and manufacturers of turbines and parts for renewable energy projects to co-develop wind and solar power projects. Due to its work in wind power in late 1995, the company became a partner and later, an associate, of Enron and then GE Energy. In 2005, Sofiva extended the development of existing wind farms on its own behalf, and it participated in explorations and administrative and technical studies in Spain aiming to develop of solar power plants, (in France as well) up until June 2010. In 2006, Sofiva Energie opened several wind farms in the Languedoc-Roussillon and Rhône-Alpes regions, co-developing them with a major operator on the market. In 2014, Sofiva Energie will continue co-developing wind and solar power plants before moving on to the operational phase in late 2015.

ACTIVITIES

Sofiva Energie’s development services cover all technical and administrative operations, from exploration to industrial commissioning according to the contracts signed with its partners or associates in the wind power sector. Despite current shortages in the market, Sofiva is studying wind power, photovoltaic power and concentrated solar power both in France and abroad.Key numbers: • Nine employees. • Capacity under co-development: approximately 70 to 120 MW in wind power and solar (in France and abroad).

LOCATIONS

Rhône-Alpes.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SSU

PPLI

ERS


DEV

ELO

PER

S/O

PER

ATO

RS

T

THEOLIA FRANCEDesigner of wind farms

Immeuble le Régent - 4 rue Jules Ferry, 34000 Montpellier+33 (0)4 67 58 22 70 +33 (0)4 67 92 58 61

www.theolia.com

ORGANIZATION

THEOLIA France began as an engineering office in 2001 and was incorporated into the THEOLIA group in May 2005. Today, THEOLIA France employs close to 50 people and has three locations for better proximity: its headquarters, located in Montpellier, the northwest office based in Rouen, and the eastern office, located in Strasbourg. The company has all the technical, administrative, and financial skills it needs to function for the entire life cycle of a wind farm project, from exploration to operation.

ACTIVITIES

As a developer, builder, and operator of wind farms, THEOLIA France is an expert in all the phases of wind farm construction: identification of suitable sites, development and financing of projects, construction of the farms and maintaining and operating them.

LOCATIONS


PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SSU

PPLI

ERS


DEV

ELO

PER

S/O

PER

ATO

RS

U

UNITEProduction of renewable energy

2 rue Président Carnot, 69293 Lyon cedex+33 (0)4 72 41 08 08 +33 (0)4 72 77 97 97

www.unit-e.fr [email protected]

ORGANIZATION

Founded in 1985, UNITe is a veteran in renewable energy. The group’s three main development structures are: • UNIT ENERGY SAS in Lyons: hydroelectric, photovoltaic, and wind energy production• HYDROWATT SAS in Lyons: hydroelectric engineering, new builds, site renovation, operation, and maintenance• ALTERNATIVE TECHNOLOGIQUE (AL TECH) in Nantes: development of wind and photovoltaic power projects, an environmental engineering office (AL TECH has developed more than 250 MW in wind energy for third parties).HYDROWATT owns two plants, in St-Girons (in Ariège) and Charézier (in Jura), that manufacture hydromechanic and electrical equipment. It also has five maintenance sites in France.

ACTIVITIES

UNITe is a specialist in the production of renewable energy. The UNITe group works in the following sectors: • Hydroelectricity: installed power of 43 MW across 25 plants throughout France• Wind energy: installed power of 20 MW across 3 installations• Photovoltaic power: own installed power of 8 MW. UNITe operates renewable energy sites with more than 100 MW of rated power for itself and on behalf of third parties. The annual production of renewable energy sold directly by the UNITe group stands at around 250 GWh. In addition to its production activities, the UNITe group is also an industrial engineering company which handles all the phases of project development, construction and maintenance of installations.

LOCATIONS

Rhône-Alpes.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SSU

PPLI

ERS


DEV

ELO

PER

S/O

PER

ATO

RS

V

VELOCITA ENERGIESDevelopment, financing, construction, and operation of onshore wind farms

65 avenue Kléber, 75116 Paris+44 207 952 2232

www.velocitaenergy.com [email protected]

ORGANIZATION

General Director: Pierre-Antoine Tetard ([email protected])Operations Manager: Eric Caradec ([email protected])

ACTIVITIES

Development, financing, construction, and operation of onshore wind farms in Europe. Velocita Energies currently has around 20 projects under development in France, for a potential total power of more than 700 MW. In France, the regions involved include Franche-Comté, Champagne-Ardenne, Midi-Pyrénées, Burgundy, Rhône-Alpes, Alsace, and Lorraine. In the UK, an initial project in operation (24 MW), one project under construction (12 MW), and about 15 projects in development in Scotland, for a potential of 450 MW.

LOCATIONS

Île-de-France.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SSU

PPLI

ERS


DEV

ELO

PER

S/O

PER

ATO

RS

V

VENDÉE ENERGIEDevelopment and operation of wind farms and photovoltaic power installations

3 rue du Maréchal Juin, 85036 La Roche-sur-Yon cedex+33 (0)2 51 45 88 86 +33 (0)2 51 45 88 99

[email protected]

ORGANIZATION

Vendée Energie is an energy-producing Société d’Economie Mixte Locale (SAEML) (French semi-public company) created by the SyDEV (Syndicat Départemental d’Energie et d’équipement for the Vendée region) in 2012 to replace the Régie d’Electricité de Vendée (REVe). With a capital of €3,778,264, 75% of Vendée Energie’s shares are held by SyDEV, 10% by Caisse des Dépôts, 10% by SOREGIES, and 5% by SERGIES.

ACTIVITIES

Vendée Energie develops, invests in, and operates power plants, especially plants that produce renewable energy (wind, photovoltaic, methanisation, etc.), in conjunction with all the economic players (local authorities, farmers, industrialists). Vendée Energie operates six wind farms with a total of 50 MW in rated power and 36 photovoltaic power plants of 2.5 MWp installed on public buildings.

LOCATIONS

Pays de la Loire.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SSU

PPLI

ERS


DEV

ELO

PER

S/O

PER

ATO

RS

V

VENT D’EST SASOperator

9 boulevard Thiers, 88201 Remiremont cedex+33 (0)6 42 71 33 90

www.vent-d-est.com [email protected]

ORGANIZATION

Vent d’Est brings together private investors and residents living near production sites.

ACTIVITIES

Generation of wind energy

LOCATIONS

Champagne-Ardenne, Lorraine.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SSU

PPLI

ERS


DEV

ELO

PER

S/O

PER

ATO

RS

V

VENTS D’OC ENERGIES RENOUVELABLESDevelopment and construction of wind farms and photovoltaic power installations

14 rue Bourrely, 34000 Montpellier+33 (0)4 67 47 86 61 +33 (0)4 99 64 08 31

www.ventsdoc.com

ORGANIZATION

Vents d’Oc - Energies Renouvelables is associated with German company Windwärts Energie GmbH, located in Hanover, Germany. Since its creation in 1994, Windwärts Energie has developed renewable energy projects in Germany, Italy, and France.

ACTIVITIES

Developer of wind farms and photovoltaic power plants. Vents d’Oc assists with all stages of project development and execution, from looking for a suitable site, feasibility studies, and authorisation procedures to technical planning and commissioning. It also organises the monitoring and management of wind and photovoltaic power plants. Its partner, Windwärts Energie, develops, finances, and operates wind farms and photovoltaic power plants, and also acquires projects in all stages of development. As a general contractor, the company develops and builds turnkey photovoltaic power systems.

LOCATIONS


PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SSU

PPLI

ERS


DEV

ELO

PER

S/O

PER

ATO

RS

V

VOL-V SASDesigner of renewable energy solutions - Independent producer of green energy

1350 avenue Albert Einstein - PAT Bât 2, 34000 Montpellier+33 (0)4 11 95 00 30 +33 (0)4 11 95 00 31

www.vol-v.com [email protected]

ORGANIZATION

Vol-V is a group with a capital of €18.9 billion. Its head office is located in Montpellier and it has two satellite offices in Rouen and Rennes. Mid-2013, Vol-V employed around 35 people.

ACTIVITIES

Vol-V designs, develops, monitors construction, obtains financing and operates renewable energy power plants on its own behalf based around three areas of activity:• Vol-V Eole: develops and operates wind farms• Vol-V Solar: develops and operates photovoltaic power plants installed on buildings• Vol-V Biomass: develops local power plants that produce biomethane from agricultural or agribusiness materials.

LOCATIONS

Languedoc-Roussillon, Upper Normandy and Brittany.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SSU

PPLI

ERS


DEV

ELO

PER

S/O

PER

ATO

RS

V

VOLTALIAProducer of renewable energy

12 rue Blaise Pascal, 92200 Neuilly-sur-Seine+33 (0)1 40 88 96 10 +33 (0)1 40 88 96 11www.voltalia.com [email protected]

ORGANIZATION

Founded in 2004, Voltalia is a French société anonyme (limited liability company) with a capital of €72,760,537.05. Voltalia’s majority shareholder is Voltalia Investissement, a holding whose majority shareholder is Creadev, an investment vehicle owned by the Mulliez family. Voltalia has been listed on the Open Market (NYSE Euronext) since May 2006.

ACTIVITIES

A fast-growing producer of renewable energy, Voltalia has 80 employees in France, Guiana, Greece, and Brazil. It develops, builds, and operates power plants according to a multi-energy strategy, using the best technology for each site: wind, solar, hydroelectricity, or biomass. Voltalia manages all steps of a project, from obtaining land and the proper authorisations to financing, building, and operating/management of the power plants.

LOCATIONS

Île-de-France, Provence-Alpes-Côte d’Azur, and Guiana.Greece and Brazil.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SSU

PPLI

ERS


DEV

ELO

PER

S/O

PER

ATO

RS

W

WINDVISIONDevelopment, construction, and operation of wind farms

La Neuvillette - 47 rue Louis Pasteur, 51100 Reims+33 (0)3 26 35 29 72 +33 (0)3 26 35 62 80www.windvision.com [email protected]

ORGANIZATION

Windvision is an international company founded in 2002 specialising in the production of renewable energy from wind turbines.

ACTIVITIES

Windvision coordinates all the processes for building a wind farm: searching for the ideal site, negotiating with landowners and authorities, scheduling, conducting studies, obtaining building permits, financing, construction, operation, and maintenance of the farm. It places special emphasis on consulting project stakeholders and keeping them informed to create a real partnership with them. A pioneer in the development of 7.5 MW machines, Windvision continues to pursue its ambitions for development in France and abroad.

LOCATIONS

Champagne-Ardenne.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SSU

PPLI

ERS


DEV

ELO

PER

S/O

PER

ATO

RS

W

WPD OFFSHORE FRANCEDevelopment of offshore wind farms

94 rue Saint -Lazare, 75009 Paris+33 (0)1 82 72 61 00

www.wpd-offshore.fr [email protected]

ORGANIZATION

The WPD group operates in 20 countries and has been specialising in developing, financing, constructing and operating onshore and offshore wind farms since 1996. With 1,500 turbines in operation representing 2.5 GW of rated power, WPD is a European leader in the wind power sector. The group’s financial soundness is proven by the ‘A’ rating it has received from Euler Hermes (a subsidiary of Allianz) every year since 2003. WPD Offshore currently has 18 projects under way in six countries, for total power of over 10 GW. Eight of the projects have already received authorisation (five in Germany, two in Sweden, and one in Finland) and are at different stages of completion. WPD Offshore France, a subsidiary formed in 2007, is developing wind farm projects off the coast of France on the English Channel - North Sea coast and on the Atlantic coast with the aim of constructing and operating these installations. These projects are developed in close collaboration with the regional players and represent a potential rated power of 2,500 MW.

ACTIVITIES

In Germany, WPD Offshore developed the first offshore wind farm in the Baltic Sea (Baltic I, inaugurated in 2011), and in February 2013 the company finalised financial arrangements for Butendiek (80 wind turbines in the North Sea built with an investment of €1.3 billion), construction of which will be under the responsibility of WPD Offshore and is scheduled to begin in Spring 2014. WPD Offshore France draws on the wind power expertise of the WPD group and its subsidiary WPD Offshore Solutions, a specialist in the construction and operation of offshore wind farms. In France, WPD Offshore won its two longstanding projects in consortium with EDF Energies Nouvelles and DONG Energy, and with Alstom as the exclusive supplier: Fécamp (Seine-Maritime) and Courseulles-sur-Mer (Calvados), totalling 948 MW. On 29 November 2013, WPD Offshore, in association with EDF EN, submitted bids for the Tréport, Île d’Yeu, and Noirmoutier sites. As part of the second call for tenders for offshore wind energy in France, these projects will strengthen the company’s ambitious industry plans already agreed with Alstom. By taking up this challenge, WPD Offshore France is utilising its local expertise and knowledge of offshore wind energy to propose viable projects that will help create a new industry in France and bolster regional development.

LOCATIONS

Paris, Nantes.

WIND POWER INDUSTRY SUPPLIERS AND SUBCONTRAC-TORS

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

3

3E FRANCEEngineering office and independent consultant

1 rue du poids de l’huile, 31000 Toulouse+33 (0)5 81 18 07 70 +33 (0)5 81 18 07 71

www.3e.eu [email protected]

ORGANIZATION

3E is an international engineering office specialising in renewable energy, energy efficiency, and sustainable management of energy consumption (electrical grids, processes, sites, etc.) 3E advises and assists clients throughout the development and operation of projects. 3E also has an R&D cell and develops high-performance, online monitoring software. The company employs around a hundred people and has offices in Toulouse, Brussels, Istanbul, Beijing, and Cape Town.

ACTIVITIES

• Onshore and offshore wind farms: Feasibility, measurement of wind resources, analysis of production potential, design and optimisation of wind farms, wind power development zones, connection studies, second opinions, operational monitoring (production and maintenance), and autonomous and hybrid systems. • Photovoltaic: Technical, economic, and administrative feasibility, project management for the preparation of an entire project, second opinions, and monitoring and analysis of system performance using specialised SynaptiQ Solar software.• Thermal solar: Feasibility, production potential, design and optimisation of installations, expert assessment and project management. • Energy in buildings and green neighbourhoods: Design of very high performance energy sites and energy-positive sites, renewable energy feasibility studies, dynamic thermal simulations of buildings, project management support for High Quality Environmental standards, and energy audits. • Applied research and innovation in photovoltaic power and power grid connection.

LOCATIONS

Midi-Pyrénées.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

8

8.2 FRANCEYour renewable energy production system under the protection of our expertise

45 rue Merlot - Zone d’activité la Louvade, 34130 Mauguio +33 (0)4 67 29 74 43+33 (0)6 72 66 80 97 www.8p2.fr [email protected]

ORGANIZATION

8.2 France is a subsidiary of 8.2 Consulting AG, a German Group of experts in the Renewable Energy. The dynamic French team, consisting of nine employees, is supported by a large network of engineers and experts from the 8.2 Group, achieving specific missions or to reinforce the team in case of a punctual excessive demand. The company counts 24 independent offices including its subsidiaries abroad, and keeps growing nationally and internationally.

ACTIVITIES

The Group has offered its multidisciplinary competences in the Renewable Energy domain since 1995. Today, 95% of 8.2 France’s turnover is generated in the wind energy business with a turnover of 1 million € in 2013. We offer to our customers monitoring and supervising packages by experts, at any stage of completion, from planning, financing, as well as construction and operation, up to plants dismantling.Our services consist of integrated solutions, and a complete system, based on various components, which allow completing a project successfully:Technical inspections and supervision

• spot or online vibration monitoring with analysis • video-endoscopy• predictable maintenance analysis• blade inspection on rope or cherry picker • various measurements: insulation, soil, mechanical displacement etc. • expertise on composite materials Due Diligence and Consulting

• support contract negotiation • supervision of technical documents and legal support • evaluation of expertise reports Construction

• support to wind farm owners• construction supervision• approval/take-over of various project milestones • punchlist clearance follow-up

LOCATIONS

Germany, France, Portugal, Austria.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

A

ABBProducts and services for energy and automation technology

3 avenue du Canada - Immeuble Athos, 91978 Courtaboeuf+33 (0)1 64 86 88 00 +33 (0)1 64 86 98 00

www.abb.fr [email protected]

ORGANIZATION

ABB is a world leader in energy and automation technologies with activities in five main areas: energy products, energy systems, automation products, process automation, and robotics.

ACTIVITIES

ABB offers both asynchronous and synchronous generators for wind turbines. Tailored to each client’s specifications, ABB’s generators use technology that has been tested and shown to be reliable in other motor and generator applications, in particular in permanent magnet technology. The Energy Products and Systems unit designs and supplies substations and high-voltage switches adapted to the wind power market.

LOCATIONS

Throughout France.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

A

ACCES DIFFICILES SERVICESWind power / Renewable energy maintenance

10 rue Jules Verne - Z.A. de l’Orée du Golf, 59790 Ronchin+33 (0)3 20 41 55 70 +33 (0)3 20 41 55 71

www.acces-difficiles.com [email protected]

ORGANIZATION

Head office in Ronchin (59790).Office ADS Picardy: 4 Rue de la Tour Roland in Lassigny (60310).

ACTIVITIES

Backed by its experience in assembly and preventive and corrective maintenance, ADS carries out operations on your wind parks and installations (assembly, inspections, monitoring, diagnoses, handling of emergencies) as part of HSE organisation. ADS is MASE-certified and offers services focusing on quality performance and feedback in a strict safety environment.

LOCATIONS

Nord-Pas de Calais, Picardy.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

A

ACOEM, 01DB-METRAVIB SAS Predictive maintenance

200 chemin des Ormeaux, 69578 Limonest cedex+33 (0)4 72 52 48 00 +33 (0)4 72 52 47 57

www.acoemgroup.com [email protected]

ORGANIZATION

OneProd is a brand owned by ACOEM.ACOEM expertise is based on acoustic and vibration technology. The company has been growing for 40 years thanks to its innovations in the fields of industry, the environment, and defence.Its areas of expertise are threefold for lasting reliability:• Monitoring, through predictive maintenance and quality or performance surveillance systems• Diagnostics and related recommendations to evaluate and adjust designs or prevent production failures• Solutions, using dedicated tools, co-design development and systems that help clients meet their objectives in terms of reliability, quality, and comfort.

ACTIVITIES

The OneProd Wind System was designed as a simple, robust solution for reliable upstream detection of mechanical and electrical failures in wind turbines.The OneProd Wind System has proven, innovative features reinforced by specific analysis methods, for unrivalled reliability in the monitoring of the wind turbine’s various elements including the turbine’s very slow moving main bearing, the gearbox, and the generator.The OneProd Wind System: 3 key points for non-stop productivity:• Reliable monitoringWhy: No time wasted with false alarms.How: By including trigger conditions for similar measurements.• Intelligent parameters like ShockFinderWhy: To efficiently monitor wind turbines, from the main shaft to the generator.How: By creating appropriate parameters specific to wind turbines.• Extended analysis capabilitiesWhy: For reliable, robust diagnostics.How: By integrating powerful, ergonomic analysis software based on industry experience.

LOCATIONS

Alsace, Lower Normandy, Île-de-France, Nord-Pas de Calais, Provence-Alpes-Côte d’Azur.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

A

ACROPHOTOSupply and installation of turnkey met masts

42 avenue du 8 mai 1945, 38130 Echirolles+33 (0)950 704 705 +33 (0)955 704 705

www.acrophoto.com [email protected]

ORGANIZATION

ACROPHOTO possesses unique expertise, offering comprehensive solutions for all your needs.Our structures are inspected by APAVE and VERITAS and can withstand even the harshest conditions.Our strict standards and patented bases guarantee the quality of your measurements.

ACTIVITIES

ACROPHOTO installs, inspects, and maintains several dozen met masts across Europe for the main renewable energy developers and producers.Activities, products, and services:• Design, manufacture, and installation of turnkey met masts from 3 to 100 metres tall• Consulting and project assistance to meet even your most specific needs• Preventive and corrective maintenance for met masts• Installation of measuring instruments and aircraft warning lights• Aircraft warning lights for wind turbines• Installation and inspection of safety equipment• Installation of solar met masts to conduct research for photovoltaic projects

LOCATIONS

ACROPHOTO is located in Rhône-Alpes but its employees travel anywhere throughout France and Europe.Its Polish subsidiary was formed in 2010 to better serve development projects in Eastern Europe.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

A

ACTEMIUM SUBSIDIARY OF VINCI-ENERGIES-

Electricity and industrial data processing

22 rue Gaston Planté - ZI de Kergaradec - BP 70076, 29802 Brest cedex 9+33 (0)2 98 34 64 00 +33 (0)2 98 42 32 22

www.actemium.com/brest [email protected]

ORGANIZATION

Actemium executes electrical and industrial data processing studies. It operates in workshops or on-site. Onshore and offshore operations (for oil platforms). Maintenance.

ACTIVITIES

Electricity and industrial data processing. Power plants, wind farms. Electrical and fibre optics networks. Industrial data processing: automation, human-machine interfaces, supervision, databases, traceability.

LOCATIONS

Brittany, Finistère.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

A

ACTEMIUM DUNKERQUE SUBSIDIARY OF VINCI-ENERGIES-

New constructions and maintenance

24 route de Fort-Mardyck - BP 70004, 59430 Saint-Pol-sur-Mer+33 (0)3 28 26 73 91 +33 (0)3 28 25 96 10

www.actemium.com [email protected]

ORGANIZATION

The VINCI Energies group is present worldwide and has a structure with over 800 companies in Europe.

ACTIVITIES

Manufacture and assembly of metal structures, walkways, and control and process booths. Electricity, automation, mechanics, and instrumentation. Maintenance of wind turbines at Total’s Dunkirk site. Wind turbine assembly for individuals.

LOCATIONS

Nord-Pas de Calais, Picardy.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

A

AGRAFE ENR SUBSIDIARY OF THE BEMORE GROUP-

Employment agency for fixed-term and permanent contracts and temporary work

Technolac BP371 - 19 rue du lac Saint-André, 73372 Le Bourget-du-Lac cedex+33 (0)4 79 44 03 51 +33 (0)4 79 44 03 52

www.agrafe.fr [email protected]

ORGANIZATION

Agrafe EnR is an employment agency specialising in hiring and deploying personnel for positions in the wind power industry. Six full-time staff manage a team of over 400 technicians recruited from all over France.

ACTIVITIES

To date, Agrafe EnR has supplied 500,000 hours of work in the wind power industry and provides technicians for: • assembly• electrical maintenance• preventive and corrective maintenance• inspectionsAgrafe EnR has helped companies hire more than 100 employees for jobs as diverse as mast-fitter, team leaders, maintenance technicians, supervisors, commissioning, and project managers.

LOCATIONS

Agrafe EnR has two management centres: one located in “Solar Valley” in Technolac in Savoie, and one in Lausanne in Switzerland.Our technicians are recruited from around the country and work in France and throughout Europe. Belgium, Germany, Austria, Switzerland, Italy, Portugal, Sweden, UK, etc.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

A

AINELECManufacture of inverters

ZI de la Boitardière, rue Ernest Mabille, 37400 Amboise+33 (0)2 47 23 67 67 +33 (0)2 47 23 67 60

www.ainelec.com [email protected]

ORGANIZATION

Ainelec is part of the HAP group (€5.6 billion). Since 1990, it has been specialising in the design and production of low- and medium-power “smart” electronic products. It has an engineering office staffed by engineers and technicians who work closely with the production unit for total command of our products. The company is ISO 9000:2000 certified, so our partners can be assured of the quality of the production and maintenance studies carried out on our products. Ainelec is the only French company that manufactures grid-connected inverters.

ACTIVITIES

Ainelec’s conversion products (inverters, chargers, and converters) are interfaced between the source (solar, hydroelectric or wind) to which a backup can be added (such as a genset) and the application (lighting, communication, refrigeration, etc.)Our recognised expertise in converters used for renewable energy such as wind and solar, has led us to develop innovative products for fuel cells.

LOCATIONS

Centre.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

A

ALIOS INGENIERIE SUBSIDIARY OF ALIOS GROUP-

Geotechnical and geological engineeringGeotechnical and geological engineering

26 avenue Ferdinand de Lesseps - ZAC Actipolis, 33610 Canéjan+33 (0)5 57 35 41 90 +33 (0)5 57 35 41 91

www.alios-eolien.com [email protected]

ORGANIZATION

ALIOS Ingénierie is a subsidiary of ALIOS.It is an SARL (limited liability company) with capital of €40,000.Total number of employees: 60, including 16 engineers, 10 technicians, 27 surveyors, and 7 administrative staff.

ACTIVITIES

Founded in 1995, ALIOS Ingénierie is a geotechnical engineering office acknowledged for its soil and subsoil surveys. In 2003, ALIOS Ingénierie decided to become involved in the development of alternative energy, creating a department exclusively for wind power. This strategic decision has helped it gain extensive experience in the field to become one of the top soil engineering offices in wind generator construction.ALIOS Ingénierie conducts surveys for 150 to 200 wind power foundations in France every year. It also conducts numerous surveys abroad (in Turkey, Morocco, and Poland, among others). ALIOS Ingénierie works on all aspects of geotechnical surveys, including:• In situ reconnaissance work conducted by drilling and testing teams in powerful, high-performance workshops• Laboratory testing on samples• Geotechnical surveys that follow the sequencing of geotechnical tasks required by standard NF P 94-500: - Preliminary geotechnical surveys of a site - Pre-project geotechnical surveys - Geotechnical surveys for projects - Geotechnical surveys for execution and monitoring - Geotechnical supervision during execution - Geotechnical diagnostics

LOCATIONS

Originally located in the southwest of France, ALIOS Ingénierie now has nine offices across France: Bordeaux, Biarritz, Dijon, Héricourt, Niort, Périgueux, Tarbes, Toulouse, and Valence. The offices are located near wind turbine construction zones for better responsiveness and more efficient supervision of construction sites.ALIOS Ingénierie abroad: In 2011, the company opened an office in Poland called ALIOS Polska. Created in partnership with a Polish geotechnical engineering office, ALIOS Polska has already conducted numerous geotechnical surveys, in particular for the wind power industry.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

X

A network of wind turbine specialists

The particularity of ALIOS Ingénierie Company is the creation of a special wind turbine department. Furthermore, always the same persons, enjoying several years of experience, treat and assess the data: these are wind turbines specialists.

www.alios.fr ı www.alios-eolien.com

ZAC Actipolis - 26, avenue Ferdinand de Lesseps - 33610 CANEJAN - FRANCEPhone +33 5 57 35 41 90 - Fax +33 5 57 35 41 91 - [email protected]

ALIOS Ingénierie :ı A network of 10 agencies in France ı Means in men and material

ı Expertise that has proven ı Expertise that exports

Geotechnical studies and diagnostics ı Hydrogeology ı Expertise

Your projects deservefull attention…and the best skills!

Geotechnical studies:

The solidfoundation guarantee

© S

ERVI

CE C

OM

MUN

ICAT

ION

GR

OU

PE A

LIO

S.

ı In Situ tests ı Laboratory tests ı Advice, geotechnical feasibility studies ı Execution studies ı Execution monitoring ı Geotechnical supervision…

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

A

ALMEAPreventive and corrective maintenance

44 bis avenue de Gerbéviller, 54300 Lunéville+33 (0)3 83 73 15 15 +33 (0)3 83 76 39 95

www.your-energy-solution.com [email protected]

ORGANIZATION

The Alliance Lorraine Maintenance Energies Alternatives (ALMEA) is an economic interest grouping formed in 2010 by three complementary companies already offering various services for the wind power industry. By joining forces, ALMEA was able to form a 180-person team to provide more comprehensive solutions for the maintenance of wind farms.

ACTIVITIES

• Turnkey CMS solutions for predictive maintenance• Global preventive maintenance and blade inspection• Corrective maintenance and blade repair• All types of rope access work: painting, sanding, interior and exterior cleaning, etc.• Inspection of safety equipment• Training in suspended access and rescue at heights

LOCATIONS

Lorraine, Grand Est.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

A

ALTEADSpecial transport, lifting, assembly, and maintenance

Rue du Moulin Neuf, 85800 Le Fenouiller+33 (0)2 51 55 54 07 +33 (0)2 51 54 30 11

www.altead.com www.augizeau.online.fr [email protected]

ORGANIZATION

The company currently has 2,400 employees. In 2011, the AltéAd group achieved a turnover of €250 million.The head office of the AltéAd group is located near Nantes.

ACTIVITIES

Special transport, handling, and lifting.Assembly, transmission, maintenance, wind power sector. AltéAd is a multi-activity company providing transport, lifting, assembly, and maintenance services for wind turbines in France and worldwide.

LOCATIONS

60 locations in France and abroad. Morocco, Belgium, Italy, Poland, Switzerland.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

A

ANDRE LAURENTManufacture of specially designed mechanical fastener components

ZI de Bayon, 42150 La Ricamarie+33 (0)4 77 59 32 80 +33 (0)4 77 80 62 64www.andre-laurent.fr [email protected]

ORGANIZATION

The company has 131 employees. Its head office is in Loire.

ACTIVITIES

André Laurent designs and produces fasteners and connectors by hot forging, machining, thread rolling, nuts and bolts, and special screws for the energy sector. It is an expert in working with metals such as low-alloy steels, stainless steels, tool steels, superalloys, titanium, nickel, copper, aluminium, and cobalt.

LOCATIONS

Rhône-Alpes and Île-de-France.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

A

ANTEAGROUPEngineering office

Immeuble AXEO29 - Avenue Aristide Briand - CS 10006, 94117 Arcueil cedex+33 (0)1 57 63 14 00 +33 (0)1 57 63 14 01

fr.anteagroup.com/fr [email protected]

ORGANIZATION

Antea Group has 3,000 employees and experts worldwide, more than 550 being in France.

ACTIVITIES

Engineering project management, expertise in the areas of Infrastructure, Environment, Water, Urban planning more than 1,000 wind turbines since 2004.

LOCATIONS

20 locations in France, the Antilles, Guiana, Reunion, and around the world.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

A

ANVIS INDUSTRYManufactures and sells rubber-based anti-vibratory solutions for the railway, energy,

water, military markets as well as industrial applications

Usine des Caillots - BP01, 58302 Decize cedex+33 (0)3 86 77 31 09

www.anvisindustry.com [email protected]

ORGANIZATION

Anvis Industry are constantly looking for customerspecific solutions and using their R&D resources for the benefit of their clients and promote innovation (rubber with low creep, compensation system, complete assemblies, large-displacement expansion joints, resistance, ...).

ACTIVITIES

Anti-vibratory mounts, designed on demand, are used to reduce vibration and mechanical noise in all industrial sectors (transport, energy, navy, etc.).Expansion joints under the brand name Dilatoflex® are renowned worldwide and equip all kinds of pipe systems exposed to high-temperature or vibrations.

LOCATIONS

Burgundy.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

A

APAVEAssists companies and local authorities in the control of

technical, environmental, and human risks

191 rue de Vaugirard, 75015 Paris+33 (0)1 45 66 99 44 +33 (0)1 45 67 90 47www.apave.com [email protected]

ORGANIZATION

9,800 employees, including 7,000 engineers and technicians. €763.9M in turnover in 2012. 130 offices across France. 47 locations abroad. 143 training sites. 31 test laboratories and centres.

ACTIVITIES

Apave strives to control risk using its comprehensive offer of quality technical and intellectual services: inspections, buildings, testing and measurements, training, and advice. All our services aim to keep people and property safe and protect the environment. They apply to all areas of activity: electricity, automation, pressurised equipment, construction supervision, non-destructive testing, energy control and management, construction equipment (lifting, handling, machines), construction and civil engineering, the environment, fire prevention, and health and safety. Its work in renewable energy includes:• Technical inspections of construction and civil engineering• Risk prevention at work sites and during operation• Operations safety (equipment reliability, machine safety, safety reports, etc.)• The environment (impact studies, noise studies and measurements)• Acceptance (initial verifications, performance measurements, etc.)• Assistance in operation and maintenance (non-destructive testing, measurements of energy and mechanical performance, inspections, diagnostics, etc.)

LOCATIONS

All of France.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

A

APPLISURFACES SUBSIDIARY OF SOFIPLAST-

Application of innovative coatings

Parc d’entreprises - Les Portes de l’Artois Plantin, 62190 Lilliers+33 (0)3 21 54 10 77 +33 (0)3 21 54 10 78www.sofiplast.fr [email protected]

ORGANIZATION

Sofiplast: around 100 employees.Engineering office (Rhône), management (Rhône) and technical management, methods and production (Pas-de-Calais), project managers (Pas-de-Calais).

ACTIVITIES

Application of innovative surface coatings and treatments, including fluoropolymers, resins, and LAM’LCOAT for lubrication, anti-corrosion, anti-adherence, and anti-fouling purposes on turbines, masts, composite structures, and more.Metal boilermaking for mast construction.

LOCATIONS

Nord-Pas de Calais, Rhône-Alpes.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

X

�B�%� ��%B ��E��"�$�?�F��"C�$C��"�$�?�

��G%�� &/��/��/ ��/��/-��/�� H/�I��/�� B��/��/&�� J

��&&��&�� -�� "#�#��

��&&�� K��B��

��K��&��&��?�/��C��";#��#;��#��$"�"��"L��L��?��?;�"��

�"";$#��"��$"�L"�!�B�>��!�B��C��"��#��

��H��&�"��$"�"L;��"��#>��L�"#;��G��M�/>��?��/L��#�/#��3��L��#��/9"�M>��3��J

0#�<"�;"��"L�"#;��G

�;;��L��K��&� ��BI

N��&"�� "��N�&��$��2,.51��'�GO88P1Q86,.6406.16**%�@GO88P1Q86,.6406.16*+

��#��G�"##��R�;;��L��6L�

9996�"S;��6L�

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

A

ARCADISGeotechnical surveys and foundationsy

9 avenue Réaumur, 92354 Le Plessis-Robinson cedex+33 (0)1 46 23 77 77 +33 (0)1 46 01 35 80www.arcadis-fr.com [email protected]

ORGANIZATION

Arcadis is an international group that provides services in project management, consulting, and engineering to improve mobility, sustainable development, and quality of life.Arcadis develops, conducts studies, implements, and manages projects in the fields of infrastructures, buildings, and the environment.Arcadis France: 600 employees with 10 regional offices; developing from the merger of 3 well-known companies: Europe Etudes Gecti, Simecsol, and Gester.

ACTIVITIES

Thanks to its multidisciplinary teams, Arcadis offers services for fields where geotechnics are directly applicable (such as geological engineering or the mechanics of soil and rocks), as well as for applications related to the design, execution, supervision, and even consolidation of structures where the behaviour of the ground is crucial. In geotechnics, as the part which is known is always limited due to the random nature of the formation of the subsoil, Arcadis provides expert analysis of geotechnical risks for all projects, regardless of the stage of design or execution.

LOCATIONS

The company has 10 offices in the following regions: Île-de-France, Nord-Pas de Calais, Rhône-Alpes, Provence-Alpes-Côte d’Azur, Pays de la Loire, Brittany, Languedoc-Roussillon, and Alsace.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

A

AREVA NP - ETABLISSEMENT DE JEUMONT SUBSIDIARY OF AREVA-

Maintenance

27 rue de l’Industrie - BP 189, 59573 Jeumont cedex+33 (0)3 27 69 90 00 +33 (0)3 27 56 33 90

www.areva.com [email protected]

ORGANIZATION

AREVA NP - Etablissement de Jeumont is a subsidiary of the Areva group specialising in the manufacture of mobile power plant equipment (pumps and mechanisms) and maintenance and operation of wind farms.

ACTIVITIES

Areva NP specialises in the manufacture of mobile equipment (pumps and mechanisms) for nuclear power plants and the maintenance and operation of wind farms.With a background in manufacturing J48 wind turbines and 10 years of experience in wind farm manufacturing, assembly, and operation projects, Areva NP offers comprehensive management for your installations, including:• Complete maintenance of wind farm sites• Wind farm operation and management, including remote monitoring and installation resets• Technical audits of wind farms and machines• Coordination of external companies and HSE management for a site• Improving machine reliability• Design, installation, and operation of CMS gearboxes, generators, etc.• Revamping• Training in wind power technology and specialities

LOCATIONS

Nord, Drôme, Aude, Côtes-d’Armor.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

A

ARTELIA EAU ET ENVIRONNEMENTEngineering specialists

6 rue de Lorraine, 38130 Echirolles+33 (0)4 37 65 56 00

www.arteliagroup.com [email protected]

ORGANIZATION

Artelia is an engineering group with multiple specialities. It is 100% employee-owned, guaranteeing independence in the accomplishment of its assignments. Artelia is especially known for its expertise in renewable energy and energy efficiency. It has all the all the technical and financial analysis skills it needs in-house to work on any stage of renewable energy projects, including diagnostics, feasibility studies, project management, regulatory studies, audits, and due diligence.

ACTIVITIES

Artelia helps develop hydroelectric projects, photovoltaic power plants, thermodynamic solar power plants, wind farms, and hydro-kinetic power plants. It integrates the exploitation of geothermal, biogas and biomass resources and creates innovations in marine energy. Artelia provides and implements solutions to improve the energy efficiency of buildings, industrial sites, and public facilities, develops strategies to reduce greenhouse gas emissions, evaluates the vulnerability and impacts of climate change and offers strategies for adjustment.

LOCATIONS

ARTELIA has 35 locations in France and 75 worldwide over 35 countries.Jérôme MERCIER - Branche Reneable energyTel. : 04 37 65 56 00 - [email protected] Sébastien LEDOUX - Marine energyTel. : 02 28 09 18 49 - [email protected]

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

A

ASSISTANCE AERONAUTIQUE ET AEROSPATIALETechnical services on custumers’ sites or in our unit of Tarbes

10 rue Mercoeur, 75011 Paris+33 (0)1 48 06 85 85 +33 (0)1 48 06 32 19www.aaa-aero.com [email protected]

ORGANIZATION

AAA perfoms for more than 20 years, all technical services (production, quality, industrialization) on sets often substract on custumers’ site and in our unit of Tarbes. We operate in the fields of aviation, nautical and rail according to custumer contracts in France and abroad, with dedicated teams constituted and managed by AAA.

ACTIVITIES

AAA, through its 2,000 formed and experimented employees, has the capacity to provide our custumers with the flexibility and reactivity in their development while ensuring compliance with quality requirements, skills’ reliability and staff’s qualifications.AAA operates in the following main domains:• Manufacturing of subset in composite and in metal/composite• Assembly structure, electricity and system • Controllers, Inspectors, Quality control managers, NDT Experts• Technical Assistance, Logistics and Technical Supports for the production• Creation of “work packages”

LOCATIONS

We are located in the north of France, the West, Bordeaux, Toulouse, Trabes, the South East, Central and Paris.We have got also sites in Germany, in Morocco, in Canada, in China and Philippines.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

A

ATVBlade manufacture

CD3, 83560 Rians+33 (0)4 94 78 35 38 +33 (0)4 94 80 94 67

atv.tm.free.fr [email protected]

ORGANIZATION

ATV was founded in 1988 under the name Atout Vent and initially produced small, carbon wind turbine blades.

ACTIVITIES

Design and manufacture of wind turbine blades.

LOCATIONS


PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

A

AUTAN ENVIRONNEMENTAssembly of wind measurement towers

7 rue de l’industrie - Bâtiment A - ZI de Vic, 31320 Castanet Tolosan+33 (0)6 79 47 68 63 +33 (0)5 61 54 06 42

[email protected]

ORGANIZATION

SARL (French limited liability company) - 7 employees.

ACTIVITIES

Assembly of wind measurement towers. Instrumentation for operation towers. Sales of equipment. Sunshine measurement stations. Sixteen years of experience.

LOCATIONS

Midi-Pyrénées, Languedoc-Roussillon, and Brittany (Toulouse/Montpellier/Vannes).

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

A

AVENISENSEDesign, manufacture, and sale of measurement instruments and related products

and services

Savoie Technolac - 17 allée du Lac Léman, 73374 Le Bourget-du-Lac+33 (0)4 57 08 02 25 +33 (0)4 57 08 02 25

www.avenisense.com [email protected]

ORGANIZATION

Avenisense is a group of experts specialising in the design and manufacture of microsensors for the instantaneous analysis of fluids. Avenisense is active in the fields of chemistry, refining, energy, and maritime transport and works with both laboratories and industrials. Using its innovative measurement systems, Avenisense helps clients increase the profitability of their industrial processes, perform more detailed and more flexible quality controls, and monitor the health or rotating machines. Avenisense’s technologies are suitable for both fixed and on-board applications and for harsh environments.

ACTIVITIES

Avenisense is the leader in on-board lubricant monitoring, thanks to its Cactus® line, featuring in situ systems that diagnose oil quality. With Cactus®, you can reduce maintenance costs while improving wind farm output by monitoring the physicochemical properties of lubricants in real time. By analysing viscosity, temperature, water activity (relative humidity), and particulates, you can anticipate maintenance stoppages, reduce the risk of failures, and adjust the load of your installations based on their age. In short, you can control what happens inside your wind turbines.

LOCATIONS

All of France.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

A

AYALASpecial transport and lifting

82 avenue Didier Daurat – BP80564, 64010 Pau cedex+33 (0)5 59 32 15 58 +33 (0)5 59 62 15 56

www.ayala.fr [email protected]

ACTIVITIES

Ayala is a player in the transport sector, including special transport, lifting, factory transfers, handling, and storage. It owns special equipment for transporting wind turbine nacelles, blades, and masts.

LOCATIONS

Midi-Pyrénées and Île-de-France.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

B

BATTERIES GLOBAL SERVICES Design, installation and maintenance (on/offshore) of industrial battery packs

6b rue de l’Elorn, 29400 Landivisiau+33 (0)2 98 24 99 38 +33 (0)2 98 46 91 04

www.batteries-global-services.com [email protected]

ORGANIZATION

Founded in 2005, BGS specialises in supplying, installing, and maintaining industrial batteries.

ACTIVITIES

All types of fixed and mobile industrial batteries (lead-acid, NiCad, and lithium), technical accessories and equipment (chargers/converters, remote surveillance, accessories), and on-site and in-workshop maintenance.

LOCATIONS


PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

B

BAUDIN CHATEAUNEUFManufacture of wind turbine masts - Transport of wind turbine parts

60 rue de la Brosse, 45110 Chateauneuf-sur-Loire+33 (0)2 38 46 38 46 +33 (0)2 38 46 38 47

www.baudinchateauneuf.com [email protected]

ORGANIZATION

Located near Orléans, Baudin Châteauneuf has been a steel construction company for 90 years. In 2007, it began manufacturing masts and foundation components. Its subsidiary, STEX, provides special transport for wind turbine components (e.g. towers, nacelles, blades) from its workshops in Châteauneuf-sur-Loire or from any other manufacturing plant or unloading port to construction sites.

ACTIVITIES

Since 2007, Baudin Chateauneuf has made more than 200 foundation parts and 30 80-foot wind turbine towers. Its goal is to be producing 40 masts and 80 foundation parts per year within two or three years.

LOCATIONS

Centre.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

B

BECK CRESPEL SUBSIDIARY OF BECK INDUSTRIES-

Standard and specialised bolting

40 rue des Fusillés, 59280 Armentières+33 (0)3 20 77 78 88 +33 (0)3 20 77 82 00

www.beckcrespel.com [email protected]

ORGANIZATION

Special connectors and mechanical components: Beck Crespel is a leading European manufacturer of connectors for specific industries, including energy (wind, gas, hydroelectric and steam turbines), the nuclear industry and diesel engines. Beck Crespel also makes connectors for the petrochemicals industry (offshore platforms), the engineering industry and equipment (public works and construction).

ACTIVITIES

Special connectors for the wind power industry: offshore wind farms, turbines, parts with high tensile strength, double-end studs, studs for all threaded parts, forged parts, heavy hex nuts with high tensile strength, screws, anchor bolts, and studs.

LOCATIONS

Nord-Pas de Calais.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

B

BERTHOLD SUBSIDIARY OF BAUDIN CHATEAUNEUF-

Earthworks and foundation work

Rue du Moulin - BP 26, 55320 Dieue-sur-Meuse+33 (0)3 29 87 60 70 +33 (0)3 29 87 73 45

www.berthold-btp.com [email protected]

ORGANIZATION

Berthold is the Grand Est subsidiary of the Baudin Chateauneuf group.

ACTIVITIES

Berthold is comprised of several business departments: the structural engineering department, the general business department, the metal bridges department and the metal frames department. Each of these departments has its own engineering office. Berthold also has an equipment and transport service, an administration service, and a workshop dedicated to steel construction. Since 2006, Berthold has been constructing concrete wind turbine foundations, as well as access tracks and access platforms for wind turbine assembly.

LOCATIONS

Lorraine.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

B

BEUZIT FRANCOIS SARL SUBSIDIARY OF BREMAT GROUP-

Travaux de terrassement et fondations

CS 57839, 29678 Morlaix cedex+33 (0)2 98 88 73 26 +33 (0)2 98 88 70 22

www.beuzit.fr [email protected]

ORGANIZATION

Beuzit François is a subsidiary of the Bremat group, which currently works in four trades related to public works and industrial bodywork.

ACTIVITIES

Beuzit François is a specialist in the mechanised laying of cables and HDPE throughout France. The company works with high-speed networks, buries cables for MV networks, and connects wind turbines.

LOCATIONS

Brittany. Morbihan and Finistère.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

B

BLP (Bolloré Logistique Portuaire) SUBSIDIARY OF BOLLORE GROUP-

Port logistics

Zone portuaire de Mielles - BP 161, 50110 Tourlaville+33 (0)2 33 88 66 15

www.blp.bollore.com [email protected]

ORGANIZATION

With 18 offices in 15 of France’s main ports, BLP, a subsidiary of the Bolloré group, is one of the leaders in specialised port handling in France. BLP’s 600 employees handle about 10 million tonnes of merchandise on the national market for bulk (biomass, fertiliser, livestock feed, etc.), industrial projects (wind turbines, EPR, heavy packages), and other conventional industries (wood, paper pulp, iron and steel, etc.)

ACTIVITIES

Over the past few years, BLP has developed a division specialising in port logistics and dedicated to wind farm projects. The division has also been working for many months on the logistics problems relating to offshore wind energy and hydro-kinetic power development in France. Thanks to its presence at 15 ports, including Cherbourg and Saint-Nazaire/Montoir, and its partnerships with specialised transporters, lifting contractors and barge charters, BLP is able to respond to any logistics problem related to MRE development. With significant storage capacities at each port, BLP also transports biomass.

LOCATIONS

Nord-Pas de Calais, Normandy, Brittany, Pays de la Loire, Poitou-Charentes, Provence-Alpes-Côte d’Azur, and Île-de-France.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

B

BMPPlastic boilermaking and composite materials

ZAC de la Grande Plaine - 1 rue des Entrepreneurs, 14760 Bretteville-sur-Odon+33 (0)2 31 26 66 21 +33 (0)2 31 26 70 93

www.bmp-chaudronnerie-plastique-composites.com [email protected]

ORGANIZATION

For more than 15 years, BMP has been manufacturing custom parts, individually or in very small numbers, for the following industries:• plastic boilermaking• composite materialsOur production site currently has 14 employees qualified to work at height (N1/N2 CACES), including:• 1 project manager• 1 workshop manager

ACTIVITIES

1) Plastic boilermaking: digital cutting, forming, thermoforming, marking2) Composites: • polyester, monolithic or sandwich on PVC foam or honeycomb structures• carbon with an accuracy of 0.2 mm, resistant, rigid and light-weight• machining to an accuracy of 0.05 mm for large-volume parts up to 6 x 2 x 3 metres3) Construction sites: lamination, repairs, maintenanceExamples of our work:• Protection for antennae, radomes, and markers• Tubs, vats, and tanks• Retention tanks and retention mats• Housings, machine guards, covers• Plumbing and ventilation• Lamination of tubs and vats• Plastification of floor and walls

LOCATIONS

Lower Normandy.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

B

BONFIGLIOLI TRANSMISSIONS SUBSIDIARY OF BONFIGLIOLI-

Solutions for power transmission and movement control

13 rue Eugène Pottier – ZI Moimont II, 95670 Marly-la-Ville+33 (0)1 34 47 45 10 +33 (0)1 34 68 88 00

www.bonfiglioli.fr [email protected]

ORGANIZATION

Bonfiglioli Transmissions is the French subsidiary of the Italian leader in Bonfiglioli drive systems. Bonfiglioli offers specific solutions for power transmission and movement control. The company has 75 employees, and its head office and assembly plant are located in Marly-la-Ville, near Roissy.

ACTIVITIES

The third largest operator on the power transmission market, Bonfiglioli offers a complete range of geared motors, drivetrains, and epicyclic gear motors constituting an integrated offer specific to each application. Bonfiglioli provides solutions for the industrial and mobile sectors. For sustainable development and specifically the wind power industry, we have a wide range of products dedicated to setting in motion the pitch, yaw, and drive in wind turbine installations.

LOCATIONS

Head office: Marly-la-Ville.Sales engineers throughout France.A large network of distributors available across France.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

B

BOSCH REXROTH SUBSIDIARY OF BOSCH GROUP-

Solutions for power transmission and movement control

91 boulevard Joliot Curie, 69200 Vénissieux+33 (0)4 78 78 52 52 +33 (0)4 78 78 68 90

www.boschrexroth.fr [email protected]

ORGANIZATION

Bosch Rexroth is one of the world’s leading specialists in drive and control technologies. Under the brand name of Rexroth, the company supplies over 500,000 clients with custom drive, control, and movement solutions for industrial applications and automation, mobile applications, and renewable energy. Bosch Rexroth is capable of adapting to the specific needs and demands of each market. The Drive and Control Company, Bosch Rexroth, develops, produces, and sells components and systems in over 80 countries. In 2011, the company in the Bosch group had close to €6.4 billion in turnover and 38,400 employees.

ACTIVITIES

Since the beginning, Bosch Rexroth has been contributing to the technical development of wind turbines. It has become an important partner and multi parts manufacturer through its hydraulics and gear offering. Bosch Rexroth has been investing for several years and has created a division dedicated entirely to wind power grouping its know-how and technological skills in three plants: two in Europe and one in China.Wind turbine drivetrains face many challenges: variable wind loads, increasing power, small spaces, minimal mass, and changing weather. To meet these challenges, Rexroth has developed comprehensive regulation, control, and safety mechanisms specific to wind power applications and turbines. These include main gearboxes, slewing reduction gears, hydraulic and electromechanical controls for regulating rotor blade pitch, central differentials, braking systems for the main transmission, and slew brakes.

LOCATIONS

Geographical coverage throughout France.Head office in Rhône-Alpes (Vénissieux).Offices in the Paris area, Strasbourg, Lille, and Toulouse.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

B

BOT FONDERIECast iron

103 boulevard Denfert-Rochereau - BP 77, 38502 Voiron cedex+33 (0)4 76 05 22 36 +33 (0)4 76 65 75 28

www.fonderie-bot.fr [email protected]

ORGANIZATION

Société anonyme (Limited liability company) with an executive board.

ACTIVITIES

Fonderie BOT has been working for industry since 1913. It is a specialist in the production of individual parts or small runs made of cast iron, EN-GJL, EN-GJS, haematite, or cast iron alloys (Ni-hard and Ni-resist) weighing 50 kg to 10 tonnes (max. 7 tonnes for EN-GJS) (up to 500 parts/year).For the wind power industry in particular, Fonderie BOT can produce EN-GJS 400-18 LT type parts made of spheroidal graphite cast iron resilient to low temperatures (e.g., hubs, blade roots, and shafts).Fonderie BOT also offers stabilisation, painting, and machining services for ready-to-install parts.Its tools range from simple polystyrene models for single parts to complex wood and resin tools for the production of repetitive parts. Fonderie BOT is also available to perform feasibility and design studies for clients.

LOCATIONS

Rhône-Alpes.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

B

BOTTE FONDATIONS SUBSIDIARY OF VINCI CONSTRUCTION FRANCE-

Foundations

5 rue Ernest Flammarion - ZAC du Petit le Roy, 94550 Chevilly-Larue+33 (0)1 49 61 48 00 +33 (0)1 49 61 48 01

www.botte-fondations.fr [email protected]

ORGANIZATION

Botte Foundations is a subsidiary of Vinci Construction France dedicated to special foundations.

ACTIVITIES

Botte Foundations is part of the Vinci Construction France group. It makes all types of special foundations: pile foundations (all kinds), underpinning, micropile foundations, injection grouting, quarry work, anchors, diaphragm walls, support, drilling, foundations for pylons and wind turbines.

LOCATIONS

Île-de-France, Rhône-Alpes, Provence-Alpes-Côte d’Azur, Nord-Pas de Calais, Ouest, Sud-Ouest, Alsace, Lorraine, Champagne-Ardenne.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

B

BOTTE SONDAGESGeotechnical surveys and foundations

25 allée du parc de Garlande, 92227 Bagneux cedex+33 (0)1 49 61 48 00 +33 (0)1 49 61 48 01

www.botte-sondages.fr [email protected]

ORGANIZATION

Botte Sondages is an independent soil engineering office.

ACTIVITIES

Bottes sondages provides consulting services to project owners, project supervisors, and companies for soil and foundation adaptation issues. A few years ago, Botte Sondages expanded into diagnostics for soil and underground water pollution and structure surveys.

LOCATIONS

Île-de-France and Brittany.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

B

BRÜEL & KJAER VIBRORemote vibration monitoring of wind turbines

46 rue Champoreux, 91540 Mennecy+33 (0)1 69 90 63 86 +33 (0)1 64 57 02 45

www.bkvibro.com [email protected]

ORGANIZATION

Brüel & Kjaer Vibro is part of the Spectris group. The company has two plants (in Germany and Denmark) where the brand’s products are developed and manufactured. It also has several diagnostics centres for remote vibration monitoring of wind turbines. The company operates in 62 countries through various subsidiaries and agents. It has been providing vibration monitoring solutions for all types of rotating machinery for over half a century.

ACTIVITIES

Brüel & Kjaer Vibro is an independent leader in all types of machine manufacture for predictive maintenance systems. It offers specific solutions for remote monitoring of wind turbines, allowing very early detection of failures and mechanical wear, accurately evaluate changes, and perform precise diagnostics (performed by Brüel & Kjaer Vibro engineers, who are wind power specialists and ISO 18436-2 and -3 certified). This remote monitoring helps prevent machine breakdowns and optimises production and maintenance.

LOCATIONS

Île-de-France.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

B

BUREAU VERITASBureau Veritas, your partner for safe, long-lasting, high-quality, environmentally-

friendly installations

67/71 boulevard du Château, 92571 Neuilly-sur-Seine cedex+33 (0)1 55 24 70 00

www.bureauveritas.fr [email protected]

ORGANIZATION

Bureau Veritas is a world leader in testing, inspections, and certifications (TIC). We help clients improve performance by offering innovative services and solutions that go beyond simple compliance with standards in order to reduce risks, improve performance, and promote sustainable development. Bureau Veritas is recognised and accredited by the largest national and international bodies.

ACTIVITIES

Bureau Veritas offers solutions for all types of needs. Its skill sets cover the entire life cycle of your project, including feasibility, authorisation, design, construction, installation, operation, transfers, and dismantling. • Offshore and onshore wind turbines: Assistance handling HSE risks and regulatory compliance. Safety reports, environmental impact studies, collision risk studies, review of ocean meteorology studies and the hydrodynamic behaviour of foundations. Review of wind turbine design. Technical evaluation of suppliers and first- and second-party inspections. Technical inspections of constructions, coordination of health and safety, periodic regulatory inspections. Maintenance optimisation advice. Certification services through Bureau Veritas Certification for certification of wind turbine types (or parts) and projects.• Photovoltaic and biomass: Feasibility studies. Risk analysis: supplies, production, distribution. Administrative and contract assistance. Verification of load capacity of existing structures. Examination of sealing and existing roofing insulation. Provisional inspections of installations. Evaluation of overall annual output.

LOCATIONS

All of France.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

B

BURKERT CONTROMATIC FRANCEManufacturer of parts and systems for fluid measurement and control

BP 21, 67220 Triembach-au-Val+33 (0)3 88 58 91 11 +33 (0)3 88 57 20 08

www.burkert.fr [email protected]

ORGANIZATION

Bürkert’s trading subsidiary in France currently has 50 employees, including 18 sales engineers and 12 office-based sales staff. Its head office is located in Alsace, near Strasbourg. The company operates throughout France through its distribution network.

ACTIVITIES

Bürkert is the market leader in fluid process management. Bürkert develops products and systems used to measure, monitor, and regulate liquid and gaseous fluids. Over the years, the company’s skills centres have developed unique lines of products such as solenoid valves, process and analysis valves, pneumatic pilot valves, and sensors. Thanks to its expertise, Bürkert offers complete solutions and products based on its client’s needs for applications that include plastics, thermal, and mechanical processes.

LOCATIONS

Throughout France.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

C

CAHORS DIVISION MOYENNE TENSION SUBSIDIARY OF CAHORS GROUP-

Construction of MV distribution and transformer substations and concrete building

envelopesenvelopes

33 avenue du Général Leclerc, 65203 Bagnères-de-Bigorre+33 (0)5 62 91 44 66 +33 (0)5 62 91 44 54

www.groupe-cahors.com [email protected]

ORGANIZATION

Group involved in photovoltaic power, wind power, and bioenergy.

ACTIVITIES

Initially an electrical engineering company, today the Cahors group is a coherent commercial and industrial entity organised around six main trades:• MV / LV transformers • Distribution, connection, and metering (of electricity, gas, and water) • MV / LV connector technology • Equipment for telecommunications networks • Cutting-edge electronics and satellite reception • Services.Cahors uses its synergy of expertise to research, design, and implement global scalable solutions to optimise energy and fluid distribution. Transfix and Pommier offer a complete line of products to connect wind turbines to public high-voltage electrical grids.

LOCATIONS

Basse-Normandie / Brittany / Pays de la Loire / Poitou-Charentes : Patrice GESTIN - [email protected] Mobile : 06 85 53 83 08Île-de-France : Cyril LAUDET - [email protected] - Mobile : 06 07 66 29 32Haute-Normandie / Nord-Pas de Calais / Picardie : Arnaud LOT - [email protected] - Mobile : 06 42 11 68 44Alsace / Lorraine / Champagne-Ardenne Luc GUNIA - [email protected] - Mobile : 06 79 04 02 04Centre : Dimitri BALY - [email protected] - Mobile : 06 30 55 69 04Rhône-Alpes / Burgundy / Auvergne / Franche-Comté : Hassan BENNOUNA - [email protected] Mobile : 06 85 22 26 88Aquitaine / Charentes : Christophe MARTINS - [email protected] - Mobile : 06 72 27 61 66Limousin / Midi-Pyrénées / Roussillon : Laurent LEVILLAYER - [email protected] - Mobile : 06 86 20 28 14PACA / Languedoc : Christophe LACOMBE - [email protected] - Mobile : 06 73 68 41 04DOM TOM : Bruno MICHEL - [email protected] - Mobile : 06 07 85 37 83

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

C

CAP INGELECElectrical connection engineering for wind turbines

47 allée des Palanques - BP12, 33127 Saint-Jean-D’Illac+33 (0)5 56 68 83 20 +33 (0)5 56 68 83 39

www.capingelec.com [email protected]

ORGANIZATION

Founded in 1992, Cap Ingelec is an engineering firm specialising in electrical engineering. It has 250 engineers and technicians and achieved €33 billion in turnover in 2010.

ACTIVITIES

Cap Ingelec can handle the following operations on wind power electrical grid projects:• Pre-project design• Project design• Assistance in selecting companies to carry out the work• Management of construction work.Cap Ingelec also conducts the following types of studies and expert assessment:• Designing electrical grids (and HV/MV substations) for the connection of wind turbines to power grids, and optimising cable sections (to minimise electricity loss)• Verifying the compatibility of wind turbine electrical infrastructure with electrical grids (harmonics and flicker)• Ensuring that the quality of electricity produced by wind turbines complies with legislation• Designing voltage maps• Making electrical comparisons to verify voltage levels at each level of production (100%, 75%, 50%, etc.)• Conducting high-voltage protection selectivity studies• Conducting stability studies.Cap Ingelec draws on the knowledge of 50 experts in HV and MV electrical grids and uses the following software:• EMTP-RV (www.etmp.com): used to create electricity simulations to optimise electrical stability• ETAP (www.etap.com): used to create electricity simulations to improve electrical grid design.

LOCATIONS

Île-de-France, Champagne, Centre, Pays de la Loire, Aquitaine, Midi-Pyrénées, Rhône-Alpes, and Provence-Alpes-Côte d’Azur.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

C

CAPELLESpecial transport

Mas David, 30360 Vezenobres+33 (0)4 66 25 55 00 +33 (0)4 66 25 55 09

www.transports-capelle.fr [email protected]

ACTIVITIES

Capelle specialises in transport, logistics, assembly, and access road construction.

LOCATIONS


PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

C

CATEXE-CATEOLESpecial transport

31 rue des frères Lumière, 68000 Colmar+33 (0)3 89 41 87 10 +33 (0)3 89 24 25 87

www.catexe.com [email protected]

ORGANIZATION

A team of eight to ten people working throughout France and Europe for over 25 years.

ACTIVITIES

Catexe Cateole is a player specialised in organising special transport, logistics, freighting, surveys, authorisations, and access studies.

LOCATIONS

Alsace, Lorraine.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

C

CATHIE ASSOCIATESOffshore geotechnics and marine geoscience

1 rue de Craïova, 92000 Nanterre+33 (0)1 47 32 48 30

www.cathie-associates.com [email protected]

ACTIVITIES

• Management of surveys (specifications, scope of work, supervision).• Desktop studies, site evaluation, cable route selection. Foundation design (feasibility, FEED, basic, detailed).• Installation engineering : pile driving or drilling analyses, cable trenching assessments. • Pile dynamic load testing, Certification dossier.

LOCATIONS

Île-de-France.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

C

CEGELEC RENEWABLE ENERGIES Electrical engineering, electricity transmission and distribution, foundations

1 rond-point du Général Eisenhower - CS 40605, 31106 Toulouse cedex 1+33 (0)5 62 87 01 28 +33 (0)5 62 87 01 30

www.cegelec-renewable-energies.fr [email protected]

ORGANIZATION

Cegelec Renewable Energies is a company in the VINCI Energies Group. The Group’s 64,000 professionals are at the service of businesses and public authorities to deploy, equip, operate and optimise their energy, transport and communications infrastructure, industrial facilities and buildings. The leader in France and a major player in Europe, VINCI Energies is present worldwide.

ACTIVITIES

As a general contractor, member of a consortium, or through separate contracts, Cegelec Renewable Energies makes the engineering, procurement and construction of windfarms infrastructure (electrical works LV, MV, HV, access roads and crane pads, foundations, networks and if applicable windturbine erection).Cegelec Renewable Energies works in close relationship with project developers during the permitting process, making them benefit of more than 15 years of experience (ERDF and RTE connections, contact with local authorities, infrastructure cost optimization through micrositting, support for administrative process…). For international projects, Cegelec Renewable Energies teams up with the Group’s companies and local partners to bid for important windfarms in countries such as Morocco, Algeria, Bulgaria, Brazil, Turkey, Romania etc.

LOCATIONS

Cegelec Renewable Energies is based in Toulouse, France, and has site managers based on windfarms under construction. This enables us to work everywhere in France and internationally thanks to the strong network provided by the VINCI Group.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

C

CG SALES NETWORKS FRANCESupplier of equipment, solutions, and services - Conversion and distribution of high-

voltage electricity

Immeuble Arago 1 - 41 boulevard Vauban, 78280 Guyancourt+33 (0)1 34 52 10 80 +33 (0)1 34 52 27 30

www.cgglobal.fr [email protected]

ORGANIZATION

CG France (formerly PAUWELS France) has 50 employees across its 2 entities: • CG Sales Network France, based in Paris (Yvelines) and Lyons (Rhône), sells the range of CG products. • CG Services Systems France, based in Fécamp (Seine-Maritime) and Avignon (Vaucluse), provides services and maintenance for transformers.

ACTIVITIES

Supplier of equipment, solutions, and services for the transformation and distribution of electrical energy. CG Sales France offers: • Turnkey project solutions for transformer substations, with particular expertise in connecting onshore and offshore wind farms to the high-voltage grid• Distribution transformers, including SLIM transformers specifically for wind turbines• Power transformers• A complete line of HV and MV equipment, both conventional and shielded GISs (circuit breakers, isolators, current and voltage transformers, etc.) CG Services Systems specialises in the construction of transformer substation installations, transformer maintenance and services, and substation equipment.

LOCATIONS

Île-de-France.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

C

CHOMARATTechnical textiles

39 avenue des Chabannes, 07160 Le Cheylard+33 (0)4 75 29 81 00 +33 (0)4 75 29 20 12

www.chomarat.com [email protected]

ORGANIZATION

Chomarat is an international textile group which employs 1,500 people. The group operates on diverse markets and technologies, and is organised in three areas of activity: composites, textiles, and fashion.

ACTIVITIES

Chomarat develops uni- and multi-directional reinforcement using fibreglass and carbon. The reinforcements are used in the manufacture of blades and nacelles.

LOCATIONS

The Chomarat group has been located in Rhône-Alpes for more than 100 years. It also operates in the United States, Tunisia, and China.Thanks to its global presence, it assists clients in their development abroad–a major advantage for markets such as wind power which are going global.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

C

CITA PRODUCTIONMechanised welding, supports, power plant pipework

57 rue de Franche-Comté, 21760 Lamarche-sur-Saône+33 (0)3 80 77 11 00 +33 (0)3 80 77 11 03

www.cita-production.fr [email protected]

ACTIVITIES

Cita Production is a mechanised welding company specialising in structure support. It works directly with major nuclear pipework players whose clients include Areva and EDF.

LOCATIONS

Burgundy.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

C

CLM INDUSTRIESmall production runs of mechanically-welded parts and assemblies (machining,

boilermaking, assembly)

3 impasse du champ chardon - Parc excellence 2000, 21800 Chevigny-Saint-Sauveur+33 (0)3 80 74 40 10 +33 (0)3 80 74 47 22www.clm-indutrie.com [email protected]

ORGANIZATION

• Small industrial OEM (having an industrial organisation with the responsiveness of a small business).• Experience working with the major energy players (such as EDF and Areva).• ISO 9001 certification v2008.• Welding qualifications.• Completely independent document management (manufacturer files).• Precise engineering.• Expertise from an integrated mechanical engineering office.• Assembly and test area.

ACTIVITIES

Target segment: Mechanical and mechanically-welded parts and assemblies weighing less than one tonne for small or offshore wind turbines - Prototypes, individual and small-scale production (<250 items).

LOCATIONS

Burgundy.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

C

CMD GEARS SUBSIDIARY OF CIF DE BUSSY GROUP-

Manufacture of gears, reducers, and gearboxes

36 avenue de l’Europe, Immeuble l’Etendard – BP 43, 78142 Vélizy-Villacoublay+33 (0)1 34 63 12 24 +33 (0)1 34 63 12 12www.cmdgears.com [email protected]

ORGANIZATION

For more than a century, CMD has been designing and producing gears, reducers, and gearboxes for low-speed, high-torque installations, including wind generators, which currently require gears several metres in diameter.The company was founded in 1901. In 2008 it achieved a turnover of €90 billion, 70% of which came from export. It has 430 employees, including 60 engineers and executives.

ACTIVITIES

• Mori Seiki horizontal machining centres: Ø 1,100, length = 6,000, max. mass = 7 tonnes• BERTHIEZ TV13 vertical lathe: Ø 13,000, height = 2,700, max. mass = 70 tonnes• Internal and external gear cutting: PFAUTER P4500: Ø 4,500, module = 32, max. mass = 70 tonnes• 2 SCHIESS RF30 internal/external: Ø 12,700, module = 50, max. mass = 100 tonnes• Internal and external gear grinding: PFAUTER P4500 G, Ø 4,350, module = 46, max. mass = 40 tonnes, precision = ISO3• KLINGELNBERG PNC260 monitoring machine: Ø 2600, module = 50, max. mass = 20 tonnes

LOCATIONS

Head office and plant in Cambrai (Nord), 539 avenue du Cateau, 59400 - Cambrai.Plants in Fourchambault and Guérigny (Nièvre).Subsidiaries in Germany, the United States, and Canada.Sales offices in Lille, Lyon, Rennes, and Vélizy.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

C

CMI TECH 51 PASTOR SUBSIDIARY OF CMI GROUP-

Wind turbine maintenance and assessment

Lot n°34 la Feuillane, 13770 Fos-sur-Mer+33 (0)4 42 40 05 00

www.cmigroupe.com [email protected]

ORGANIZATION

French Société par actions Simplifiées (Simplified limited company).

ACTIVITIES

CMI Tech 5I Pastor is active in the onshore and offshore wind energy sector, offering a wide range of services:• Machine commissioning with help from the manufacturers• Preventive maintenance• Corrective maintenance• Predictive maintenance• Troubleshooting, repair• Vibration analysis and monitoring• Oil sample analysis• Reliability and availability analysis• End-of-warranty evaluations• Specific tasks (gearbox or generator replacement, etc.)

LOCATIONS

Provence-Alpes-Côte d’Azur region.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

Xwww.cmigroupe.com/services

Your partner in wind turbines ��

��

��

CMI Services is involved in Wind turbines maintenance

Since 2008 CMI Services is active in wind turbines maintenance offshore and on shore as well supplying its customers with a wide range of high level services:

� commissioning � scheduled and unscheduled maintenance � fault finding fault diagnosis and trouble shooting � predictive maintenance (MINT) � reliability and availability analysis � assessment after warranty period � heavy equipment on site works such as gearboxes or generator replacement

Education and training of CMI skilled technicians:

� CMI Services has selected and trained high level technicians

� a successful education of Bachelor or master in electro-mechanics is the minimum required before employment

CMI Teams Strength:

� continuous awareness of HSE rules, health safety environment and working conditions dedicated to our Client’s needs

� fully equipped workshops with large capacity for supporting operational teams

� policy of continuous training � ISO 9001 certification

Safety first

CMI teams are:

� familiar with HSE plan and risks assessments, dully trained for:

� BOSIET, HUET (Opito) � helicopter winching � first aid � working and rescue at height

CMI references

Wind turbine farm operators:

� Belwind � C-Power � La Compagnie du Vent � EDF EN

Wind turbine manufacturers:

� REpower � Vestas � Nordex � Alstom Ecotechnia � Gamesa

��

ContactCMI ServicesWindturbine Technology Pole CMI Tech5i/Pastor Lot 34 La Feuillane 13770 Fos sur Mer cedex Tel: +33 4 42 40 05 00 Email: [email protected]

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

C

CMR FRANCE (Contrôle Mesure Regulation) SUBSIDIARY OF CMR GROUP-

Instrumentation, engineering, industrial data processing, automation

Technopole de Château Gombert - 7 rue John Maynard Keynes, 13013 Marseille+33 (0)4 91 11 37 00 +33 (0)4 91 11 37 02

www.cmr-group.com [email protected]

ORGANIZATION

Founded in 1959 in Marseille (France), CMR is an international group of 8 subsidiaries located around the world. Today, 500 people including 40 engineers develop and market in perfectly equipped premises a full range of products from sensors to complete supervision systems. CMR is ranked amongst the French 100 most successful SMEs/ETIs (according to the French “Express” magazine, ...).8% of the turnover of CMR is dedicated to the research of new technologies whose reliability is strictly controlled by Classification Societies. Our Group is ISO 9001:2008 certified by the AFAQ Certification. CMR FAR EAST, a subsidiary of CMR Group in Singapore is specialized in the manufacture of low an medium-voltage switchboards.

ACTIVITIES

Design, development and marketing of a full sensor range for rotating machines, harnesses and monitoring and control/command systems meeting the requirements of the industry sector dedicated to the production of energy. Engineering is also a strong business of CMR which is able to offer solutions for monitoring, automation and supervision for end-users even in offshore or far distant areas.

LOCATIONS

In France: Provence-Alpes-Côte d’Azur region. Abroad: USA, UK, Tunisia, Germany, India, China, Singapore.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

C

COBHAM SLIPRINGSDesign and manufacture of electrical slip rings

18 allée de Montréal - BP439 Ville-La-Grand, 74108 Annemasse+33 (0)4 50 87 72 50 +33 (0)4 50 37 67 51

www.cobham.com/sliprings [email protected]

ACTIVITIES

Cobham Sliprings has been designing and manufacturing electrical slip rings since 1962.Electrical slip rings create an electrical connection between a stationary part and a rotating part in multi-turn rotations when cable transmission is not possible.Standard or custom, with or without bore.Transmission of low-level or high-frequency signals up to 500 MHz.Transmission of video, RS 422, RS 485, and Profibus signals, field networks, and ethernet.Power transmission up to several hundred amperes.Since 1997, over 35,000 wind turbines have been equipped with Cobham electrical slip rings.Wind turbine applications:• Electrical or hydraulic pitch control• Generator excitation• Transmission of power, signals, bus networks, etc.• Blade heating power supply

LOCATIONS

Rhône-Alpes.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

C

COFELY ENDEL SUBSIDIARY OF GDF SUEZ-

Industrial Maintenance and associated services

Tour Voltaire - 1 place des Degrés, 92059 Paris La Défense cedex+33 (0)1 57 60 90 00 www.cofelyendel-gdfsuez.com

[email protected]

ORGANIZATION

ENDEL SAS is a GDF SUEZ subsidiary.

ACTIVITIES

French leader for industrial maintenance and associated services, and privileged partner of industrial companies, Cofely Endel pilots or accompanies complex projects in a number of different sectors. With a staff of 5,500, and more than 140 sites, the subsidiary of the Energy Services Business Line of GDF SUEZ today achieves a turnover of almost 700 million Euros. Its primary objective is to allow its clients to remain centered on their core businesses and improve the dependability and performance of their installations with an ongoing concern for safety and security. The professionalism of the Cofely Endel teams is expressed through its many specific abilities such as boiler making, electromechanical, piping, maintenance and realization engineering, project management, research and logistical skills, …To improve the industrial performance of its clients, Cofely Endel is committed to a process of energy and environmental efficiency. Its eco-solution experts are therefore available for the entire range of businesses – to analyze and meet its clients’ energy efficiency needs. Key sectors:• Aeronautics/space industry • Agro-food • Army • Wind turbines • Rail • Gas • Hydraulics • Engineering • Naval • Nuclear • Petrochemical • Pharmacy / cosmetics • Port authorities • Steel • Thermal.

LOCATIONS

140 sites in France and overseas departments and territories (French Guiana & Reunion).

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

C

COFELY INEOExecution of wind farm infrastructures

Tour Voltaire - 1 place des degrés, 92059 Paris La Défensewww.cofelyineo-gdfsuez.com [email protected]

ORGANIZATION

Cofely Ineo works on projects for industrial and tertiary-sector electrical installations, energy networks, public lighting, transportation and telecommunications infrastructures, overall security, energy production, information systems, and outsourcing. Cofely Ineo is part of GDF SUEZ Energy Services, european leader of multi-technical services and one of five business lines of GDF SUEZ, a leading worldwide energy company.

ACTIVITIES

Cofely Ineo, GDF SUEZ, is a leading supplier of renewable energy solutions. As a wind turbine infrastructure manufacturer, Cofely Ineo provides integrated solutions from feasibility studies to grid connection. As an installer and a system integrator, Cofely Ineo designs and develops turnkey photovoltaic solutions suitable for various setup: roof-mounted solar panels or photovoltaic plants.

LOCATIONS

300 facilities in France and 15,500 employees.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

C

COLAS Construction and maintenance of transport infrastructure

7 place René Clair, 92653 Boulogne-Billancourt+33 (0)1 47 61 76 93 +33 (0)1 47 61 74 72

www.colas.fr [email protected]

ORGANIZATION

The Colas group is a leader in the construction and maintenance of transport infrastructures. Colas operates in 50 countries through a network of 800 establishments and 1,400 equipment production sites. It has 66,000 employees and executes 110,000 construction sites each year, using resources from a dense network of quarries, emulsion plants, and coating sites. In 2012, Colas had a consolidated turnover of €13 billion, 42% of which came from abroad. In France, Colas operates through its 450 locations grouped in seven regional subsidiaries, as well as its subsidiary SPAC, specialised in network activities.

ACTIVITIES

Colas has been working on construction sites for energy production (wind, solar, biomass, etc.) for several years, providing: • Know-how from its construction units in earthwork, roadways, foundations, and networks• A single contact nationwide following cases and local monitoring of the execution of your projects• The ability to conduct studies anywhere in France• A global work offer or in separate work packages• Technical solutions suitable for all types of land• Construction optimisation that meets quality standards and deadlines.Thanks to its numerous locations, Colas employs locals at all its construction sites.

LOCATIONS

Île-de-France.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

C

COMER INDUSTRIES SUBSIDIARY OF COMER INDUSTRIES SPA-

Design and execution of engineering systems for power transmission

1 avenue Christian Doppler, 77700 Serris+33 (0)1 60 31 70 50 +33 (0)1 60 31 03 71

www.comerindustries.com [email protected]

ORGANIZATION

Comer Industries is a world leader in the design and production of power transmission engineering systems.The company is a player various sectors:• Agriculture• Industrial• Mobile• EnergyIt has 1,300 employees and turnover of more than €330 billion. Comer Industries is a reliable partner with a reputation for its continuous improvement, flexibility, rapid response to client needs, and collaboration in co-engineering projects. It has strategically-placed premises, the ability to innovate, and highly-qualified international staff.

ACTIVITIES

Comer Industries is a strategic partner to major manufacturers of renewable energy machines in over 60 countries around the world.Its power transmission solutions have been used by some of the world’s topmost players in wind power.Comer Industries has developed a wide range of drivetrains that set pitch, yaw, and drive in motion in wind turbines up to 10 MW.

LOCATIONS

Île-de-France.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

C

CORDIAL SUBSIDIARY OF PROMAN-

Hiring and deployment of wind turbine assembly and maintenance specialists

(fixed-term and permanent contracts and temporary positions)

ZI Sud-Est , Immeuble « Le Lotus » - 22 rue du Bignon, 35000 Rennes+33 (0)2 23 41 20 50 +33 (0)2 23 41 20 51www.cordial-interim.fr [email protected]

ACTIVITIES

HR management solutions: Hiring, deployment, and management of technicians. Fixed-term and permanent contracts and temporary jobs.

LOCATIONS

National and international deployment.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

C

CORDMManufacture of gears

Zi de Tavannes - BP 50099, 55103 Verdun cedex+33 (0)3 29 84 33 89 +33 (0)3 29 84 17 99

www.cordm.com [email protected]

ORGANIZATION

For 30 years, CORDM has been manufacturing straight-cut, helical, and conical gears up to 1,600 mm in diameter and a maximum module of 25. Its gears meet ISO 1328-4 standards. The company works with client drawings and can provide comprehensive manufacturing services or à la carte machining, cutting, or tooth correction only, as needed. All services are accompanied by complete quality documentation.Our head office and production facilities are located at the same site in Verdun in France. Thanks to its significant investment policy, CORDM has a newly-renovated 6,000 m2 plant equipped with around 50 cutting-edge machines.

ACTIVITIES

Quality measurement has been our top priority for many years. Our efforts are focused both on our quality management system (CORDM is ISO 9001-certified) and inspection of our products. CORDM has a three-dimensional WENZEL WGT1000 measurement centre and a facility for magnetic particle inspection and chemical attack (Nital etching) for non-destructive testing.Thanks to the quality of its products, CORDM has doubled its turnover in the past three years. It supplies gears to the some of the largest prime contractors in the world in diverse markets, including railways, wind power, crushing, heavy industry, oil and gas, tunnel boring, and mining machinery, etc.

LOCATIONS

Lorraine (Verdun).

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

C

CTE WIND CIVIL ENGINEERINGWind turbine foundation engineering

33 rue du Haut Chemin, 35780 La Richardais+33 (0)3 89 66 60 58 +33 (0)2 23 15 09 10

www.cte-wind.com [email protected]

ORGANIZATION

A LLC created in 2012 and located in Dinard (Brittany). CTE WIND is part of the CTE group, based in Mulhouse (Alsace), which has been active in the wind energy sector since 2003. The corporate group owns subsidiaries in Poland (Warsaw), Germany (Freiburg im Breisgau), Portugal (Lisbon), Vietnam (Hanoï) and Brazil (Porto Alegre).CEO : Thierry Hummel.Director : Alexander Martin.

ACTIVITIES

An experienced design office specializing in the analysis and design of onshore wind turbine foundations. CTE WIND also offers consulting and expertise services for the design of foundations.Share of the wind sector in our activity: 100%Staff: 15 employeesAchievements: foundation design for more than 4,800 wind turbines (8,600 MW) in more than 670 farms, in France and in over twenty countries throughout the world (Germany, Belgium, Poland, Romania, Turkey, Canada, Mexico, Uruguay, Brazil, Vietnam etc.).Future work: reinforced concrete towers, strengthening of our activity in Eastern Europe and Africa.

LOCATIONS

Britanny and Alsace.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

D

D2M ENGINEERINGEngineering office for naval architecture and marine engineering

663 avenue de la première armée françaiseZIP Brégaillon, 83500 La Seyne-sur-Mer

+33 (0)4 94 11 54 20 +33 (0)4 94 06 62 67www.d2m-group.com [email protected]

ORGANIZATION

Independent private company founded in 1986.Team: naval architects, structural engineers, systems engineers, hydrodynamic engineers, anchor engineers, engineers specialising in ocean and meteorology studies and designers.

ACTIVITIES

Naval architecture and marine engineering studies focusing on:• Foundations, anchors, and structures for marine renewable energy systems (wave, current, wind)• Studies of a site’s environmental conditions: analysis and processing of ocean meteorology data, statistics, and extreme conditions• Engineering for offshore construction, installation procedures, maritime capabilities• Studies of floating and bottom-fixed platforms for the offshore oil industry• Anchoring of offshore oil structures• Marine operations (marine procedures for installation and transport, maritime and mechanical tools, lifting at sea, towing)• Ship design, especially lay barges, crane sizing, and dynamic positioning• Risk studies.

LOCATIONS

La Seyne-sur-Mer (Var) and Le Pecq (Yvelines).

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

D

DAHER INTERNATIONAL SUBSIDIARY OF COMPAGNIE DAHER-

Engineering - Manufacture - Integration - Industrial logistics

1 allée Maryse Bastié, 91325 Wissous+33 (0)1 49 75 98 47 +33 (0)1 49 75 98 33

www.daher.com [email protected]

ACTIVITIES

• Aeronautics: design - manufacture - systems integration (metal and composite expertise).• Nuclear: nuclear environment authorisations and certifications.• Consideration of safety and security and environmental impact.

LOCATIONS

Île-de-France.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

D

DCNSNaval defence applications and energy innovation

40-42 rue du Docteur Finlay cedex 15, 75732 Paris+33 (0)1 40 59 50 00 +33 (0)1 40 59 58 75

www.dcnsgroup.com [email protected]

ACTIVITIES

DCNS is a world leader in the naval defence sector and an innovator in energy. An international, high-tech company, DCNS serves its clients using its exceptional expertise and unique industry capabilities. The group designs, builds, and maintains submarines and surface ships and related systems and infrastructure. It also provides services to construction sites and naval bases. DCNS also offers a wide range of energy solutions, particularly for marine renewable energy. DCNS is committed to sustainable development and was one of the first players in its sector to achieve ISO 14001 certification. DCNS was awarded France’s Trophée national de l’entreprise citoyenne (national corporate citizenship trophy under the patronage of the President of the Senate.) The prize was awarded to the company for its knowledge transfer programme ‘Les Filières du Talent DCNS’. The company has 12,000 employees and a turnover of €2.4 billion.

LOCATIONS

Île-de-France.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

D

DEC+Thermal cutting and the machining of metal components

8 rue du Creusot - BP 34, 71210 Montchanin+33 (0)3 85 80 27 49

[email protected]

ORGANIZATION

6,500 m2 storage facility with 14 overhead cranes near a railway freight station.

ACTIVITIES

Dec+ provides computerised thermal cutting, machining and chamfering on one single machine and shot-blasting for Wind-industry companies.

LOCATIONS

Burgundy.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

D

DEFSolutions and services for fire safety systems

9 rue du Saule Trapu, 91882 Massy cedex+33 (0)1 60 13 81 81 +33 (0)1 60 13 81 00

www.def-online.com [email protected]

ORGANIZATION

Established in France in 1958, DEF provides services to the fire trade for over 50 years. DEF designs, supplies, installs, commissions and services a wide range of fire detection and fire extinguishing systems.DEF’s mission is to provide you with the best fire protection solutions to “protect your future”.

ACTIVITIES

Fire fast “out of control” and can evolve into a catastrophy. It is the only event that has a high impact on loss of life, environmental exposure, and costs. Fire endangers the continuity of an operation and a early detection and extinguishing is the only way to prevent a fire developing into a catastrophe.As for the wind energy activity, European reference tables recommend to integrate fire safety systems in the hazardous areas such as nacelles, transformers, switchgear cabinets, and electric power stations.

LOCATIONS

The DEF Group counts 30 companies, 1,700 employees, local branches in 8 countries and 30 local agencies in France – among with agencies dedicated to specific activities (Nuclear, Telecom, Transport and Wind Energy), 6 factories, 4 in France, 1 in Italy and 1 in China for a turnover of € 175 million in 2012.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

D

DEKRA INDUSTRIALTechnical and human risk prevention

34-36 rue Alphonse Pluchet - CS 60002, 92227 Bagneux cedex+33 (0)1 55 48 22 63 +33 (0)1 55 48 23 60

www.dekra-industrial.fr [email protected]

ORGANIZATION

DEKRA Industrial SA is a holding grouping the various subsidiaries in the group and is a branch of the DEKRA International group dedicated to risk prevention at all project stages (design, construction, operation, and transfer).

ACTIVITIES

Equipment inspection, construction inspection, HSE recommendations, consulting in property matters and technical audits, property and real estate diagnostics, and management systems certification training.

LOCATIONS

Île-de-France.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

D

DELTABOX-SERAManufacturer of aircraft warning lights

9 rue de Bourgogne, 89250 Chemilly-sur-Yonne+33 (0)3 86 40 92 10 +33 (0)3 86 40 92 15

www.delta-box.fr [email protected]

ORGANIZATION

Delta Box is a French company specialising in the design and manufacture of aircraft warning lights. With 20 years of experience in obstacle warning lights, Delta Box’s products meet ICAO (International Civil Aviation Organisation) guidelines. The company’s research and development department is constantly producing innovations to offer products that use the latest technology, such as LEDs and solar power.Delta Box offers four different ranges of low-, medium-, and high-intensity obstacle warning lights:• LEDEO: LED technology• SERA: Neon technology• STROBEO: Strobe technology• SOLEO: Solar technologyDelta Box’s products are particularly suitable for warning lights on telecommunications towers, airport towers, buildings, cranes, wind turbines, and large civil engineering structures.

ACTIVITIES

Delta Box has developed a complete line of solutions for met masts (solar) and wind turbines (synchronised and with backup) that meet current regulations. All Delta Box products are certified by STAC (Service Technique de l’Aviation Civile).Delta Box’s products feature LED technology, solar-powered systems, and UPS cabinets.It offers various types of synchronisation depending on clients’ needs.

LOCATIONS

Burgundy.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

D

DEUBLIN SARLPrecision rotating joints

61 bis avenue de l’Europe - ZAC de la Manoue, 77184 Emerainville+33 (0)1 64 61 61 61 +33 (0)1 64 61 63 64www.deublin.com [email protected]

ORGANIZATION

The Deublin group is a world leader in the manufacture of precision rotating joints. Deublin is present on every continent, with four modern production facilities and 18 subsidiaries, plus a network of exclusive distributors around the world.

ACTIVITIES

Thanks to its know-how, Deublin has been supplying wind turbine developers, builders, and users with:• Single- and multi-way hydraulic rotating joints• LV, MV and HV electrical slip rings• A comprehensive inventory of rotating joints and spare parts available instantly anywhere in France and abroad• Specialists to provide technical support, after-sales service, and studies to find a suitable technical solution• Repair service on-site or at our facilities.Deublin has become an essential partner to the wind power industry, with tens of thousands of rotating joints sold to first tier manufacturers.

LOCATIONS

Operating from its base in Emerainville (Seine-et-Marne), Deublin SARL delivers rotating joints and spare parts and can operate anywhere in France.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

D

DEWI FRANCEMeasurements, analyses, and studies, onshore and offshore certifications

21 rue François Garcin, 69003 Lyon+33 (0)4 27 46 22 70 +33 (0)4 27 46 22 79

www.dewi-france.fr [email protected]

ORGANIZATION

The DEWI group currently employs 160 people and has been part of the Underwriters Laboratories company since June 2012. UL is an international certification and safety body that has been in existence for over 100 years. DEWI’s parent company is located in Germany and has subsidiaries in Spain, France, Italy, Turkey, Canada, Brazil, and China.

ACTIVITIES

As a one of the world’s leading wind energy consultants, DEWI offers all types of measurement, analysis, and study services, onshore and offshore certifications for wind turbines and other components, in-depth training, and technical and financial consulting services to wind power developers and banks. Visit our websites for more information: www.dewi.de / www.dewi-occ.de / www.ul.com.Wind measurement; studies of wind potential and forecasted resources; measurement of power curves; measurement of mechanical load; acoustic and vibration measurements; integration, quality, grid connection conditions; technical due diligence; wind turbine inspections; R&D; training and seminars; certification (DEWI-OCC) of turbines and components.

LOCATIONS

Rhône-Alpes.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

D

DINALEC SCOP SAElectrotechnical engineering

ZA des Alleux, 7 rue du noroît, 22100 Taden+33 (0)2 96 87 48 00 +33 (0)2 96 87 48 01

www.dynalec.com [email protected]

ORGANIZATION

A “Société Coopérative et Participative à forme anonyme” (worker cooperative in the form of a limited liability company) with variable capital. 15 employee associates. €2.5 billion in turnover.

ACTIVITIES

Development, studies, design, manufacture, and installation of electrical cabinets and control and command cabinets for the process industry. Commissioning. Design and construction of all kinds of systems for supervision, remote management, automation, and industrial data processing. After-sales service hotline. Sale and resale of machines, accessories, and supplies. One R&D office.

LOCATIONS

Head office in Dinan in Côtes-d’Armor in Brittany. Long-standing trading region: France.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

D

DM TABLEAUXDitribution boards

16 rue des Cortots, 21121 Fontaine-lès-Dijon+33 (0)9 62 21 17 62

www.dmtableaux.com [email protected]

ORGANIZATION

The company employs 7 technicians, four of whom have 20 years of experience in industrial wiring as well as trainees on various courses.Proactive in cost estimates and production, with a 620 m2 workshop space, DM Tableaux produces small and middle-sized series.

LOCATIONS

Burgundy.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

D

DNV GL (ex GL GARRAD HASSAN France)Technical consultingTechnical consultingg

69, rue du Chevaleret, 75013 Paris +33 (0)1 44 50 56 10 +33 (0)1 44 50 56 20www.dnvgl.com [email protected]

ORGANIZATION

DNV GL is the world leader in technical consulting in the field of renewable energy. An acknowledged expert in services for the wind power industry, the company also has cutting-edge expertise in solar and marine energy.

ACTIVITIES

DNV GL provides assistance to project owners (developers, investors, equipment manufacturers, etc.) at all stages of their project, from initiation to operation.Development/financing:

• Wind measurements (conventional, LiDAR, SoDAR)• Site identification (feasibility and impact studies)• Studies of production potential (wind, solar, ocean)• Banking audits (due diligence: review of supply, construction, and maintenance contracts)• Project audits for investors (buyers or sellers)• Complete engineering services for onshore and offshore wind farms (civil and electrical engineering, marine construction, maintenance and operation plans).Supply/construction:

• Construction site management and acceptance of structures• Comprehensive project management for offshore wind farm projects.Operation:

• Monitoring and optimisation of project performance, operation audits• Commissioning and end-of-warranty inspections, routine inspections• Power curve measurements• Measurement of electrical and acoustic properties• Short-term projections of renewable energy production.Manufacturing:

• Machine design (wind turbines, hydro-kinetic) and monitoring systems.Training, strategy and policy studies, market studies.Software: WindFarmer (for wind farm design), Bladed (to model wind turbines), SCADA (for supervisory control and data acquisition during operation).

LOCATIONS

Île-de-France.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

D

DOUCE-HYDRO SASDesigner and manufacturer of hydraulic cylinders, hydraulic systems, piston

accumulators, and Jarret Structures shock absorbers

2 rue de l’Industrie - BP 20213, 80303 Albert cedex+33 (0)3 22 74 31 00 +33 (0)3 22 74 78 43

www.doucehydro.com [email protected]

ACTIVITIES

A prototype for a retractable wind turbine is currently being tested. Douce-Hydro designs and manufactures counterweight and lifting cylinders.

LOCATIONS

Picardy.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

D

DUFF NORTON EUROPEManufacture of rotating joints and check valves

45 route nationale, 02310 Romeny-sur-Marne+33 (0)3 23 70 70 00 +33 (0)3 23 70 70 10www.duffnorton.fr [email protected]

ORGANIZATION

The company was founded in 1927 under the name Raccord Gautier but became Duff Norton Europe in 1998 when it was bought by the Colombus McKinnon group. Its production facilities and head office are based in Romeny-sur-Marne in Aisne. Duff Norton Europe has about 30 employees and makes 50% of its turnover from export, mostly within Europe. The Duff Norton subsidiary based in Charlotte, North Carolina, in the US has helped strengthen the company’s world presence.

ACTIVITIES

Duff Norton Europe is a manufacturer of rotating unions, swivel joints, and check valves. The experience of its sales and technical teams, backed by the engineering office, allow it to conduct studies and offer specific solutions according to clients’ needs.

LOCATIONS

Picardy, Languedoc-Roussillon.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

D

DUFOURTransport and handling

21-23 route de Bourbourg, 59380 Spycker+33 (0)3 28 25 36 22 +33 (0)3 28 60 37 97

www.dufour-transport.fr [email protected]

ORGANIZATION

Dufour Transports et Manutentions SA owns France’s largest fleet of high-capacity construction cranes on the wind power sector:• Lattice boom crawler cranes (all types up to 600 tonnes)• Lattice boom wheel cranes (all types up to 750 tonnes)• Wheel cranes with telescopic boom (all types up to 700 tonnes)

ACTIVITIES

Dufour Transports et Manutentions SA specialises in crane operations, transport of indivisible parts, and wind turbine assembly. It has lifting cranes and cranes that can lift nacelles to great heights, suitable for wind turbine dimensions.

LOCATIONS

Nord-Pas de Calais.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

E

EADS ASTRIUMDesign and manufacture of wind turbine blades and related solutions

Avenue du Général Niox - BP 20011, 33165 Saint-Médard-en-Jalles+33 (0)5 56 57 30 00

ORGANIZATION

Astrium is a wholly-owned subsidiary of the EADS group. It is dedicated to civil and military space systems and services and launched a Wind Energy entity five years ago.

ACTIVITIES

Using its experience and expertise in the space sector, EADS Astrium develops innovative solutions for the wind power sector. It designs differentiating technologies, provides maintenance support, and offers solutions to optimise energy production for manufacturers of wind turbines and wind farm operators. To guarantee the reliability and competitiveness of its services, EADS Astrium focuses its innovation on engineering activities (development and industrialisation of new blades or kits for specific issues, analyses of blades damaged in operation, etc.) while aiming for optimisation of the entire system. EADS Astrium provides clients with services they can trust and helps clients stay ahead of the competition:• Design of light, reliable blades• Licences for innovative solutions for specific needs: as lightning protection, blades with low radar interference, and blades with linkages• Manufacture of prototype and pre-series blades• Optimisation, automation, and reliability-improvement in blade manufacturing processes (production lines, tools and processes)• Non-destructive inspection methods for blades on-site or coming off the production line• Optimised wind farm operation solutions and energy storage management.EADS Astrium also has a dedicated industrial site that can be used as needed for additional high-quality production.

LOCATIONS

Aquitaine.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

E

ECL SUBSIDIARY OF RIO TINTO ALCAN-

Manufacturer of equipment for special machines

100 rue Chalant, 59790 Ronchin+33 (0)3 20 88 70 70 +33 (0)3 20 88 70 99

www.ecl.fr [email protected] [email protected]

ORGANIZATION

• 500-person site: Design, support, project management, and machine installation at the client’s site• 250-person workshop: Scheduling, supplies, methods, project management, manufacturing and testing, quality, and ESS• 8 subsidiaries with 250 employees: UAE, India, China, Australia, Canada, Netherlands, South Africa, Mozambique.

ACTIVITIES

• Steel plate cutting machines (plasma, laser, oxy-acetylene)• Manual and automated welding, machining, painting/shotblasting, assembly (mechanical, hydraulic, pneumatic, electrical, automation) and operational testing• Parts from 15 kg to 50 tonnes with 47 bridge cranes from 5 to 50 tonnes; 60 davit arms.

LOCATIONS

Nord-Pas de Calais.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

E

EDF EN SERVICES SUBSIDIARY OF EDF ENERGIES NOUVELLES-

Operation, Maintenance

10 rue de la Jasse -ZA Viargues, 34440 Colombiers+33 (0)4 67 09 82 00

www.edf-en.fr [email protected]

ORGANIZATION

A wholly-owned subsidiary of EDF Energies Nouvelles, EDF EN Services operates and maintains green power plants in Europe for EDF EN and for third parties. The activity groups over 350 specialists dedicated to operation, maintenance, and engineering services. EDF EN Services operates 1,261 MW of power through strategic partnerships with the players in the sector. EDF EN Services has achieved certification for ISO 9001 (quality management), OHSAS 18001 (health and safety), and ISO 14001.

ACTIVITIES

Safety • Industrial risk management • Safety inspections, supervision and performance monitoring • 24/7 access control (for plants and substations) • Remote systems reboots • Grid manager relations • Troubleshooting • Preventive and corrective maintenance • Replacement of major wind farm components • On-call 7 days a week • Engineering • Cutting-edge expertise in mechanics, electricity, and automation • End-of-warranty wind farm inspections • Resources • Qualified personnel trained by the company • A cutting-edge monitoring centre for remote control of equipment, data analysis, support to teams on the ground • Local maintenance offices to optimise lifespan and reduce production losses.

LOCATIONS

Colombiers (Languedoc-Roussillon, head office), Saint-Gilles (Brittany), Caen (Lower Normandy), Saint-Quentin (Nord-Pas de Calais), Toul (Lorraine), Salles-Curan (Midi-Pyrénées), Eyguilles (Provence-Alpes-Côte d’Azur), Fresnay-l’Évêque (Centre), Losses (Aquitaine).

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

E

EG SOLGeotechnical surveys and foundations

6 rue des Essarts, 38610 Gières+33 (0)4 76 42 63 69 +33 (0)4 76 42 63 70

www.egsol.fr [email protected]

ORGANIZATION

EG Sol was founded in 1993 when it set up its first office near Grenoble.

ACTIVITIES

EG Sol specialises in geotechnics, geology, project management of special foundation projects, the environment, and expert assessment.

LOCATIONS

Île-de-France, Lower Normandy, Brittany, Poitou-Charentes, Rhône-Alpes, Languedoc-Roussillon, and Provence-Alpes-Côte d’Azur.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

E

EIFFAGE CONSTRUCTION HAUTE NORMANDIE SUBSIDIARY OF EIFFAGE-

Construction - Civil engineering

6 rue Jean Rostand - BP 242, 76142 Le Petit-Quevilly cedex+33 (0)2 35 58 82 00 +33 (0)2 35 68 12 49

www.eiffage.com [email protected]

ORGANIZATION

Within the Eiffage group, France’s third largest and Europe’s sixth largest group in the building and public works sector, Eiffage Construction combines all the trades related to urban development, real estate, construction, operations, maintenance, and facility management.

LOCATIONS

Le Havre - Rouen - Caen.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

E

EIFFAGE CONSTRUCTION METALLIQUE SUBSIDIARY OF EIFFAGE-

Construction of foundations, masts, and electrical substations for offshore wind farms

48/50 rue de Seine, 92707 Colombes cedex+33 (0)1 47 60 47 00 +33 (0)1 47 60 47 05

www.eiffagemetal.com

ORGANIZATION

Eiffage Construction Métallique is a subsidiary of the Eiffage group. Its historical metal construction business activities include building, civil engineering structures, mechanical construction, boilermaking, industrial plants, and turnkey contracts for various sectors, including the offshore industry. Eiffage Construction Métallique is present in France with over 20 industrial sites and numerous construction sites, including one construction site on the Mediterranean coast at Fos-sur-Mer mainly dedicated to the offshore industry and the construction of wind turbine masts.

ACTIVITIES

Backed by years of experience and its engineering resources, Eiffage Construction Métallique has the capacity to develop any onshore or offshore project. Its manufacturing capabilities, skills, and expertise are recognised in major projects, such as the Millau viaduct, which required 40,000 tonnes of steel, and in marine projects such as references acquired in construction and installation in the offshore oil sector. Eiffage Construction Métallique has all the skills and resources necessary to undertake major construction on land and offshore requiring considerable resources. In 2007, Eiffage Construction Métallique built a plant entirely dedicated to the construction of metal masts. The plant has a capacity of 80 masts per year. The company recently expanded its onshore expertise to offshore applications by acquiring the Smulders group. With over 10 years of experience, Smulders has manufactured over 950 steel foundations for offshore wind turbines and is a world leader in this sector.

LOCATIONS

Île-de-France, Provence-Alpes-Côte d’Azur.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

E

EMCC SUBSIDIARY OF VINCI CONSTRUCTION-

Offshore Installation, equipment supplier, port operator, more products service

2 boulevard de l’Europe - CS 10128, 44603 Saint-Nazaire cedex+33 (0)2 40 11 29 00 +33 (0)2 40 11 29 01

www.entreprise-emcc.fr [email protected]

ORGANIZATION

Foundations, port infrastructure, and service vessels, 250 floating units: jack-up platforms, floating cranes, dippers, suction dredgers, multicats, and barges. Foundation equipment: cranes, drills, hydraulic drills, vibrodrills, rock-breaking masts, etc.

ACTIVITIES

Dredging and rock-breaking with and without explosives. Maritime, subaquatic, and river construction work: sheet pile driving, bridge construction, jetties. Handling and installation of pre-fabricated items. Installation of sealines and underwater outlet pipes.

LOCATIONS

Pays de la Loire.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

E

ENCIS ÉNERGIES VERTESTechnical and environmental engineering

Ester Technopole - 1 avenue d’Ester, 87069 Limoges+33 (0)5 55 36 28 39

www.encis-energiesvertes.com [email protected]

ORGANIZATION

For more than seven years, the engineering office of Encis Energies Vertes SAS and its independent, multi-disciplinary team have been providing reliable, high-quality expert assessment of wind power potential to determine the production of future wind farms.

ACTIVITIES

Encis Energies Vertes uses its expertise in renewable energy technical engineering to serve public and private project owners.Its primary wind power services include:• Wind studies (collecting and analysing meteorological data, extrapolating this in the long-term, and modelling wind resources)• Calculations of production potential and optimising wind farm energy• Financial simulations• Technical and financial feasibility studies• Wind farm safety reports

LOCATIONS

Head office in Limoges, Encis Energies Vertes’ team operates throughout France.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

E

ENCIS WINDWind measurement - Aircraft warning lights

17 rue Charles Lindbergh, Parc d’activités d’Océalim, 87270 Couzeix+33 (0)5 55 489 490 +33 (0)5 55 489 321

www.enciswind.com [email protected]

ACTIVITIES

Encis Wind offers project developers and wind farm operators turnkey installations of wind measurement masts. Encis Wind also supplies and installs Obelux LED night-time aircraft warning light systems on all types of structures. Lights are available in all intensities and are STAC-certified.

LOCATIONS

The company is based in Limousin but operates throughout France, in neighbouring countries, and further abroad.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

E

ENERPAC SUBSIDIARY OF ACTUANT CORPORATION-

High-pressure hydraulics

32 avenue de la Baltique, 91140 Villebon-sur-Yvette+33 (0)1 60 13 68 68 +33 (0)1 69 20 37 50

www.enerpac.com [email protected]

ORGANIZATION

Enerpac is the undisputed world leader in high-powered tools and equipment used on the industrial market.

ACTIVITIES

Always at the cutting edge of technology, Enerpac has developed a range of products and solutions for the wind power industry. Manufacturers of wind turbines and parts, installers, and maintenance and servicing providers can all count on Enerpac for practical solutions. With its experience in products for the oil and gas industry, Enerpac provides appropriate, sought-after solutions for both onshore and offshore installations.

LOCATIONS

Île-de-France.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

E

EOLE SYSTEMManufacture of wind turbines with a power rating of less than 36 kW

2 ZA La Cigalière, 84250 Le Thor+33 (0)4 90 31 28 16 +33 (0)4 90 31 29 11

www.eole-system.com [email protected]

ORGANIZATION

Eole System is a French company founded in 2008. It is located in the Rhône valley, one of the windiest regions in Europe. Eole System has invested heavily in R&D to develop simple, innovative products that are robust and reliable. The company has an engineering office that can develop custom wind turbines for specific applications. It also designs and builds helicopter blades, offering complete control of the aerodynamics and composite materials.

ACTIVITIES

Currently, Eole System’s catalogue features two wind turbine models: a 3 kW turbine 4.10 m in diameter, and a 10 kW turbine 8 m in diameter. Eole System designs and develops wind turbines. Blades are manufactured and assembled at its facilities. The company uses local suppliers (machiners, boilermakers, etc.) and works directly with installers, providing them with all the materials necessary to complete an installation. Eole also trains installers in how to install and maintain its equipment.

LOCATIONS

Provence-Alpes-Côte d’Azur (Vaucluse).

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

E

EOLECLEANWaste collection and management, clean-up

Rue de la Fère, 02100 Neuville-Saint-Amand+33 (0)3 23 09 98 63 +33 (0)9 71 70 63 77

www.eoleclean.com [email protected]

ORGANIZATION

• Teams of technicians and engineers• Installation of containers for special waste• Establishment of comprehensive clean-up procedures (technical, operational, and administrative aspects).

ACTIVITIES

Collection and management of waste from renewable sources, including wind power waste. Clean-up of wind farm sites, collection and processing of photovoltaic panels.

LOCATIONS

Picardy.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

E

EOLTECHWind energy expert

39 chemin de Fournaulis, 31170 Tournefeuille+33 (0)5 61 15 44 13

www.eoltech.fr [email protected]

ORGANIZATION

Established in 2002, Eoltech is an independent consultancy whose core business is focused on the analysis of the wind resource. With over 10 years experience in this field, our company has expanded its range of services and is now the leading French player in this market.Totally independent from any project development, Eoltech is a trusted third party and thus meets the requirement of independence which is necessary in the financing phase of wind projects.

ACTIVITIES

From the assessment of the theoretical wind energy potential in the development phase of a project to the re-analysis of the production data of wind farms in operation, Eoltech offers a wide range of services all related to the assessment of the wind resource and the associated risks.• Measurement and analysis of wind data,• Assessment of wind potential in the development phase,• Re-evaluation of wind potential of operating parks,• Pre-diagnosis of operating wind farms,• Control of the overall performance of operating parks,• Estimation of the impact of project specific curtailments (noise, bats, etc.),• Training.These areas of expertise are offered to our clients mainly through technical assistance, audits and due diligence.Whether on the French territory or abroad, Eoltech has gained significant experience with more than 5 GW of wind projects analyzed for major players in the energy sector. Over 1.5 GW of these parks are currently in operation.

LOCATIONS

Midi-Pyrénées / France.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

E

EOLYS RESSOURCES ET ENERGIES SUBSIDIARY OF BOUY AUSARE-

Design and construction of small wind turbines

Route de la Châtaigneraie, 85120 Saint-Hilaire-de-Voust+33 (0)2 51 50 10 99 +33 (0)2 51 00 50 38

www.eolys-re.com [email protected]

ORGANIZATION

SAS (simplified private limited company) with a capital of €100,000.

ACTIVITIES

Eolys Ressources et Energies is a manufacturer of wind turbines under 36 kW. Its product line is called ‘La Métronome’. The company has three products: La Métronome 6 kW, La Métronome 12 kW and La Métronome 36 kW.

LOCATIONS

Pays de la Loire.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

E

EPSILON COMPOSITEManufacture of carbon-fibre parts

5 route de Hourtin - BP 30 052, 33340 Gaillan-en-Médoc+33 (0)5 56 73 47 74 +33 (0)5 56 73 40 80

www.epsilon-pultrusion.com [email protected]

ORGANIZATION

Epsilon Composite has its head office in Gaillan-en-Médoc (33) in France, and has a young, dynamic team of 150 employees (10% of whom work in innovation). The company has a worldwide market, with a turnover of €18 million in 2008, 80% of which came from abroad (> 30% from Japan and 25% from Germany).

ACTIVITIES

Epsilon Composite is the world leader in the pultrusion of carbon-fibre shapes for diverse industries, including niche markets, energy with offshore oil drilling and wind energy, civil engineering, and more.Epsilon Composite is expert in the techniques of carbon fibre and epoxy resin pultrusion and pullwinding, and in various bonding and assembly techniques.With 20 pultrusion lines, Epsilon Composite produces more than 3.5 million metres of round technical profiles per year, (Ø 6 to 200 mm tubes in standard production and solid rods Ø 6 to 25 mm), square tubes (30 x 30 mm to 101 x 101 mm), flat bars 30 to 200 mm long and 1.2 to 4 mm thick, parts made from these bars and special profiles in various shapes. Epsilon Composite also includes HS, IM, HM, and UHM products (up to 450 GPa for some).

LOCATIONS

Aquitaine.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

E

ERNEOManufacture of permanent magnet generators for small wind turbine applications

Cap Alpha - Avenue de l’Europe, 34830 Clapiers+33 (0)4 67 59 30 35 +33 (0)9 81 70 30 65

www.erneo.fr [email protected]

ORGANIZATION

Erneo is an SAS (simplified private limited company) founded in 2009 by three doctors of electrical engineering. The company stands out for its extraordinary ability to innovate. Backed by its experience in electric motors for cutting-edge applications, such as aeronautics, Erneo has been developing high-performance magnetic generators since 2010 for the renewable energy sector. Its patented technology has received multiple national awards, including one from a competition held by the Ministry of Research and one from the Tremplin PME competition.

ACTIVITIES

Erneo designs and manufactures permanent magnet generators for small wind turbine applications. It offers direct drive generators between 2 and 50 kW. Generators are sold in kits or assembled. Erneo offers customisation (adaptation of mechanical interfaces and voltage levels) for perfect integration into various types of wind turbines. Our generators are characterised by their high level of output, compactness, reduced use of materials and high reliability. They are simple to connect and unlike other products existing on the market, can operate on both active rectifiers and simple passive rectifiers without affecting performance.

LOCATIONS


PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

E

ETAIR MEDITERRANEEMaintenance of wind turbine blades

2 rue Lucien Vidie, 66600 Rivesaltes+33 (0)4 68 52 88 15 +33 (0)4 68 63 54 51

[email protected]

ORGANIZATION

ETAIR Méditerranée is a SARL founded over 10 years ago. It has 47 employees working on difficult-to-access sites, including 12 specialists in wind turbine blade maintenance.

ACTIVITIES

• Interior and exterior inspections and diagnostics of blades.• Repair of composites (fibreglass, carbon, polyester, epoxy).• Interior and exterior cleaning of masts, blades, and nacelles.• Access methods: 2 cable platforms, ropes, telescopes, and drones.• Electrical inspections of lightning arresters. Assistance assembling wind turbines.• Regular preventive inspections. Laying of life lines (cables, rails, etc.)• Work in confined spaces. Fast response to lightning damage.• Lashing of rotors and blades to the ground.

LOCATIONS


PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

E

ETHM SUBSIDIARY OF FIPAM GROUP-

Supply of harbour equipment

1 avenue du président Georges Pompidou, 92500 Rueil Malmaison+33 (0)6 07 04 43 02 +33 (0)1 41 39 22 57

www.ethm.com [email protected]

ORGANIZATION

SARL with a capital of €7,000. Part of the FIPAM group (financial company of shareholders).

ACTIVITIES

Specialist in mooring calculations for the definition and supply of fenders and mooring systems.

LOCATIONS

Île-de-France, Upper Normandy, Lower Normandy.The FIPAM group has locations in the Paris and Normandy region via its shipyards.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

E

ETV SUBSIDIARY OF CHARIER-

Civil works, foundations, maintenance

1 rue de la mer - ZI Caen Canal, 14550 Blainville-sur-Orne+33 (0)2 31 72 35 37 +33 (0)2 31 72 64 62

www.charier.fr [email protected]

ORGANIZATION

ETV is the subsidiary of Charier specialising in civil works.

ACTIVITIES

ETV specialises in structural engineering, maritime construction work, driven foundations, industrial civil works, and more recently, the construction of wind turbine foundations.

LOCATIONS

Lower Normandy. Operation in a 600 km radius.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

E

EUROPE TECHNOLOGIESComposites, mechanical projects, engineering, R&Dp p j g g

2 rue de la Fonderie, 44470 Carquefou+33 (0)2 51 70 04 94 +33 (0)2 51 70 05 83www.groupe-et.com [email protected]

ORGANIZATION

The Europe Technologies group is comprised of three divisions–Composites, Mechanical projects, and Technology–and works in various wind power sectors.

ACTIVITIES

• Composites Department:

With the help of its engineering department, Europe Technologies develops parts made of composite materials for its clients. Working together with the client, the company determines the best materials and manufacturing processes to use and tests the outcome by building prototypes and creating a validation plan. Europe Technologies also repairs parts made of composite materials. It has a department specialised in machining assessment and in-house equipment for metal and composite-material parts, providing clients with turnkey solutions for machining optimisation, programming, monitoring systems, and vibration analysis systems. Its instrumentation solutions and vibration analysis solutions allow you to monitor the operation of a machine’s moving mechanical systems in real time to help reduce maintenance operations. • Technology Department:

Europe Technologies’ impact surface treatment (an innovative, patented ultrasonic process) helps extend the lifespan of metal parts and structures subject to harsh conditions.Shot-peening is used on mechanical parts subject to high stress, new parts, or as preventive maintenance (e.g. turbine parts, gears, shafts, etc.)Hammering welds helps put a finish on mechanically-welded structures, thus improving their resistance to the environment.• Mechanics Department:

The mechanics division has methods and industrial means for the industrialisation of composite and metal parts (definition of the machining procedure, cutting tools, fitting tools, and programming).Europe Technologies has the facilities to machine large-scale items (X=8 m Y=3 m Z=2 m, for lifting of 30 tonnes) for the production of parts and tools made of metal or composite materials.

LOCATIONS

Pays de la Loire. Head office and most subsidiaries are located in Carquefou (Loire-Atlantique).

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

F

FAUCHE AUTOMATION AQUITAINE SUBSIDIARY OF JP FAUCHE GROUP-

High- and low-current industrial electricity, process and automation, energy,

maintenance

ZI Pessac Canéjean - 9 rue Jean Perrin, 33600 Pessac+33 (0)5 57 26 67 80 +33 (0)5 57 26 67 89www.fauche.com [email protected]

ORGANIZATION

The JP Fauché group has been working in four areas of activity for over 45 years: industrial electricity, processes, energy, and maintenance.JP Fauché is a particularly well-known player in the design and construction of all types of power plant, including biogas cogeneration plants, photovoltaic power plants and wind farms. JP Fauché has all the experience and expertise necessary to execute turnkey industrial projects. In 2008, it had a turnover of €165 million.

ACTIVITIES

JP Fauché is a service provider to many prime contractors in a wide range of activities including aeronautics, the military, hospitals, major retailers, hotels, and agrifood business.It is heavily involved in the development of renewable energy, especially wind energy. It is an expert in building and maintaining facilities for distributing wind-generated electricity, including supplies of delivery substations, inter-turbine cables, mast foot cubicles, and dry-type transformers.

LOCATIONS

The JP Fauché group currently has over 1,000 employees across 35 sites in France and Poland. Fauché Automation Aquitaine has locations in Pessac (Gironde) and Dax (Landes) and is one of the subsidiaries specialising in wind power.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

F

FAVIER TPLManufacture of insulating sheathsg

Le Bourg, 63480 Bertignat+33 (0)4 73 82 12 93 +33 (0)4 73 82 20 62

www.favier.com [email protected]

ORGANIZATION

With over 80 years of experience in the manufacture of braided insulating sheaths, Favier TPL is one of the European leaders in this field.65% of its production is exported to 40 countries around the world. The main areas of application for its products are electromechanics, household appliances, vehicles, lighting, railways, and metallurgy, etc.

ACTIVITIES

In terms of electromechanical engineering applied to the wind power industry, Favier TPL’s sheaths are used in particular in alternators, transformers, and electrical cabinets to provide dielectric, thermal, and mechanical protection for winding outlets and cable bundles.

LOCATIONS

Favier TPL has a subsidiary in the US and a network of agents in numerous countries.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

F

FDKOMPOSITESManufacture of wind turbine blades

Hangar d’Afrique - Quai du Maroc, 76200 Dieppe+33 (0)5 55 10 05 80 +33 (0)5 55 10 05 81

www.fdkomposites.fr [email protected]

ORGANIZATION

SARL (French limited liability company)

ACTIVITIES

• Manufacture of wind turbine blades for onshore and offshore activities• ‘One-set’ technology to create a blade as a single piece• Optimisation of lifespan and reliability, and costs over the life-cycle (maintenance) reduced by up to 20%• Refitting and repowering of blades no longer being made

LOCATIONS

Located in Upper Normandy in Dieppe Port. Blades can be built near construction sites. Innovative technology allows manufacturing sites to be built at low cost.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

F

FONDASOLGeotechnics

BP 767, 84035 Avignon cedex 9+33 (0)4 90 31 23 96 +33 (0)4 90 32 59 83

www.fondasol.fr [email protected]

ORGANIZATION

FONDASOL, the leader in French geotechnics, can leverage over 50 years of experience in the field.FONDASOL is an independent engineering office with 485 employees. It conducts nearly 8,000 geotechnical surveys every year.Since 2001, all of its investigations and engineering studies have been conducted in accordance with ISO 9001 quality management processes certified by Bureau Veritas Certification.

ACTIVITIES

With more than 3,000 wind turbine studies conducted since 2005 (in mission G11, G12, G2, and G4), FONDASOL has become an essential partner to wind power companies.With its experience in geotechnics which affects all areas of the construction industry and land-use planning, FONDASOL has a thorough understanding of soil dynamics and has developed expertise specific to wind turbines.FONDASOL is composed of a team of 110 experts and engineers which relies on a dynamic, efficient organisation structure to provide clients with top-notch services: a scientific and technical department, a geophysics and geology department, a department for complex investigations, and four laboratories (soil identification, mechanical testing and testing on concrete, rocks, and aggregate, etc.).FONDASOL can help you.FONDASOL’s engineers assist clients at every stage of their project to solve any kind of geotechnical issue: pre-project and project studies, geotechnical surveys and monitoring during execution, geotechnical supervision during execution and geotechnical diagnostics.

LOCATIONS

FONDASOL’s engineers, experts, and teams are located in 27 local offices throughout France. Each office works with one of three regional management departments in Lyon, Nantes, or Nice.Its International Studies Management team in Avignon can help you with your projects abroad.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

F

FONDASOLUTIONSEarthworks, access roads, and wind turbine foundations

Site Agroparc Bât. C1 - 200 rue Michel de MontaigneBP 41223, 84911 Avignon cedex 9

+33 (0)4 32 74 15 60 +33 (0)4 32 74 06 22www.fondasolutions.com [email protected]

ORGANIZATION

Fondasolutions is an independent company specialising in the construction of foundations for wind turbines.

ACTIVITIES

Founded in February 2004, Fondasolutions is the French arm of Schmees Bau in Germany, which has been an integral part of the wind industry for over 10 years. The company has built more than 500 foundations in Germany, Belgium, Austria, the Netherlands, Poland, and France. Fondasolutions can handle any project and provides comprehensive civil engineering services: access roads, platforms, excavations, and foundations. Fondasolutions has developed a special formwork system for its clients’ wind turbine foundations which saves time during assembly but still allows the use of uses concrete and steel rebars.

LOCATIONS


PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

F

FONDEOLEFoundation work, roadways, and buried networks

82 avenue de Bammental, 51130 Vertus+33 (0)3 26 53 21 96 +33 (0)3 26 53 02 03

www.fondeole.com [email protected]

ORGANIZATION

The product of a Franco-German partnership, Fondéole SAS has been operating in France since 2006. The combination of its expertise and the experience of its founders makes Fondéole a sound value in wind power civil engineering.

ACTIVITIES

Fondéole offers a global service for all wind turbine infrastructures and all types of machines. Its solutions are designed to meet wind turbine developers’ budgets and deadlines. Its integrated engineering office develops projects anywhere in France and now also in Eastern Europe. The company operates in three main areas: foundation construction, roadway construction, and the installation of buried networks.

LOCATIONS

Fondéole is located in Champagne-Ardenne and has helped install more than 200 wind turbines in France, for a total of approximately 500 MW of power.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

F

FONDERIE HELLINAnticorrosion zinc and aluminum anodes manufacturing - alloys trading

201 rue Jean Jaures, 56600 Lanester+33 (0)2 97 76 14 81 +33 (0)2 97 76 65 12

www.anodes-carenage-corrosion.com [email protected]

ORGANIZATION

Zinc and aluminum foundry since 1987, foundry Hellin is specialized in casting of corrosion protection pieces for submerged structures, also materials and alloys trading for mechanical workshops.

ACTIVITIES

Welded and bolted zinc and aluminum anodes manufacturing (supply vessels and pleasure boats, offshore wind turbines structures, subsea pipes). Copper and copper alloys trading activity: bronze (UE7, UE12), aluminum bronze, brass, copper.

LOCATIONS


PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

F

FORGITAL DEMBIERMONT S.A.S SUBSIDIARY OF FORGITAL GROUP-

Forged and seamless rolled rings

4 rue Jules Campagne, 59330 Hautmont+33 (0)327 697 373 +33 (0)327 697 385

www.forgital.com [email protected]

ORGANIZATION

With 3 production plants, Forgital Group is leader on the market of seamless rolled rings. We are producing rings from 300 mm to 8,200 mm with a maximum weight of 45 tons. We can supply rings in steel, stainless steel, super alloys, aluminium, titanium etc… We can also deliver rings up to 12.000 mm diameter made from forged segments.

ACTIVITIES

We can deliver flanges for wind mills towers, either rough rolled or fully machined and drilled. Our metalurgical expertise enables us to offer you the grade and the heat treatment condition which will answer your technical requirements. We also produce rings for gear boxes.

LOCATIONS

Forgital Dembiermont 59330 Hautmont, Forgital Italie 36010 Seghe di Velo, Forgital FMDL 42500 Le Chambon-Feugerolles.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

F

FOSELEVLifting - Industrial maintenance - Industrial pipework - Industrial cleaning - Modular

construction - Logistics & storage

530 rue Mayor de Montricher - PA Les Milles, 13798 Aix-en-Provence cedex 3+33 (0)4 42 24 57 57 +33 (0)4 42 24 57 76

www.foselev.com [email protected]

ORGANIZATION

1,800 employees, with 450 in the Lifting/Handling/Transport department.

ACTIVITIES

FOSELEV has developed a special offer for the “Wind Power” sector. FOSELEV offers a fully integrated service, including lifting, installing and assembling parts, performed by highly-qualified, skilled workers.

LOCATIONS

Network of 64 offices (France and export).

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

F

FRANCEOLE SUBSIDIARY OF PELICAN VENTURE-

Manufacturer of masts, foundation parts and internal parts for wind turbinesp p

100 allée Hubert Curien - Espace Harfleur 2000, 71200 Le Creusot+33 (0)385 779 800 +33 (0)385 779 810

www.franceole.com [email protected]

ORGANIZATION

FrancEole is a wholly-owned subsidiary of Pelican Venture. A French family holding based in Paris, Pelican Venture supplies equipment for the energy markets with top-ranking companies in their cutting-edge activities. FrancEole has two dedicated production sites and is France’s top provider of masts and foundation parts for wind turbines. With the support of Pelican Venture, FrancEole has set up an organisation giving it sufficient operational autonomy to satisfy the market, involving on-going professional training for its teams, quality initiatives and certifications.

ACTIVITIES

Since 2003, FrancEole’s production sites have been manufacturing masts, foundation parts and internal parts for wind turbines using its skill and expertise in steelworking. From delivery of the raw materials to when the masts are handed over to the clients, FrancEole manages the purchase, manufacture, assembly, protection, and design of the internal equipment for the segments in accordance with clients’ specifications while offering an unbeatable level of quality control. With its dedicated, specialised teams of nearly 200 qualified staff and large-scale equipment, FrancEole can produce 600 finished, ready-to-install mast segments each year. Thanks to its experience and the engineering office abilities, FrancEole provides consulting services, optimises design, and supplies and assembles the internal parts on its production of masts and for external demand.FrancEole understands its customers’ needs, providing them with a quick-response unit specialising in on-demand construction site services, including expert assessment, inspections, adjustments, internal and external repairs, painting touch-ups, and more. Major builders and budding companies alike trust FrancEole with their projects. To date, FrancEole has built nearly 2,500 mast segments that have been erected in France, Spain, Belgium, Germany, and England.

LOCATIONS

Île-de-France, Burgundy. Head office in Paris and with both of its production sites located in Burgundy [Creusot (Saône-et-Loire) and Longvic (Côte-d’Or), near Dijon], FrancEole is conveniently located near its clients and their projects, as well as being near a historic steel centre for the qualification of its personnel. The company’s location allows it to work on wind turbine projects and constructions anywhere in France and neighbouring countries. Contact: Mathias Regnier: +33 671 328 431, [email protected]

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

F

FRANKI FONDATION SUBSIDIARY OF FAYAT GROUP-

Special foundations

9-11 rue Gustave Eiffel, 91350 Grigny+33 (0)1 69 54 21 00 +33 (0)1 69 54 21 10

www.franki-fondation.fr [email protected]

ORGANIZATION

Franki Foundation is one of the four companies making up the Foundations Division of the Fayat Group, the other companies being Sefi-Intrafor, Sotraisol, and Sols et Fondations. Through these companies, the Fayat group offers a complete range of technical solutions for all types of foundations and soil consolidation work (piles, micropiles, supports, diaphragm walls and beams, injections and jet grouting, quarry consolidation, drilling, etc.).

ACTIVITIES

The teams from Franki Foundation operate in the field of special foundations providing a full range of piles, supports, and soil reinforcement techniques. Franki also has an engineering office that uses the latest technology to develop reliable, economic solutions, and a materials centre that designs and adapts tools to the needs of particular projects.

LOCATIONS

Île-de-France, Upper Normandy, Pays de la Loire, Franche-Comté, Rhône-Alpes, Provence-Alpes-Côte d’Azur.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

G

G-TEC SA Geophysics, geological engineering, hydrography, and environmental surveys

120 boulevard Amiral Mouchez, 76087 Le Havre cedex+33 (0)2 35 24 76 17 +33 (0)9 72 11 68 21

www.g-tec.eu [email protected]

ORGANIZATION

Specialised in geophysics, G-tec has been a player at world level since 1993, assisting clients with risk management by executing investigations on sites to allow decisions to be made concerning major land-development projects. G-tec currently has over 50 engineering geologists, geophysicists, electronics engineers, oceanologists, and biologists.

ACTIVITIES

G-tec is an engineering office specialising in geophysical exploration, assistance, and consulting.It is an expert in using and adapting the various methods to respond to all structural issues and issues concerning the determination of soil and seabed subsoil characteristics.Throughout wind turbine projects, G-tec responds to needs concerning knowledge of the seabed: • Magnetometry and gradiometry: detection of UXO, wrecks, and cables• Seismic refraction: characterisation, compactness and rippability of materials• Seismic reflection: structure of geological layers• Single- and multibeam bathymetry: morphology of ocean floors• Sidescan sonar: cartography of the properties of ocean floors• Design, supervision, and analysis of geotechnical surveys• Drilling inspections• Underwater imaging• 4D sonar imaging: for monitoring and positioning during construction• Impact studies and compilation of regulatory documentation• Environmental monitoring. G-tec owns its own equipment and vessels.The company is ISO 9001:2008 certified and is in the process of becoming OHSAS 14001 certified.

LOCATIONS

Upper Normandy.Dieppe, Le Havre, Rouen, and the Paris area.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

G

GANTOIS SAManufacture of metal cloth and fabric, perforated plates, netting, and formed products

BP 307, 88105 Saint-Dié-des-Vosges cedex+33 (0)3 29 55 21 43 +33 (0)3 29 55 37 29

www.gantois.com [email protected]

ORGANIZATION

520 employees at 2 production sites.6 business activities: • Weaving and forming• Perforated sheets for industry• Equipment for industry and for quarries• Fencing and protection for local authorities• Architecture and the building sector• Distribution

ACTIVITIES

Blade de-icing • Lightening protection • Electromagnetic compatibility • Electrical conductivity • Climbing safety • Perimeter protection.

LOCATIONS

Île-de-France • Lyon • St-Priest • Rennes • l’Hermitage • Lille • Wasquehal • Marseille • Bordeaux • Mérignac.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

G

GE ENERGY POWER CONVERSION SUBSIDIARY OF GENERAL ELECTRIC-

Energy conversion

1 rue John H. Patterson, 91345 Massy cedex+33 (0)1 77 31 20 00

www.ge-energy.com [email protected]

ORGANIZATION

GE’s Power Conversion business uses its expertise in power conversion systems to help drive the electric transformation of the world’s energy infrastructure. We design and supply advanced products and systems to improve industrial processes for a cleaner, more productive future. Power Conversion supplies specialised sectors such as energy, marine applications, industry and related services.We provide cutting-edge technology using rotating machinery, frequency converters and automation systems to serve the energy sector, including oil and gas, energy production, and renewable energy.

ACTIVITIES

GE Energy’s Power Conversion unit is a world leader in converters for the wind power sector, having equipped over 25 GW of turbines. It is also a specialist in wind generators–mainly permanent magnet generators–of varying speeds, from very low speed (direct drive) to standard- and medium-speed (hybrid) wind generators. Besides supplying products, Power Conversion can help you optimise both the entire powertrain and the quality of the energy produced, and thanks to its engineering expertise, it can adapt wind farms to grid codes. Its innovations include high-temperature superconductivity prototypes.

LOCATIONS

Lorraine, Île-de-France and Franche-Comté. Generator and motor plant in Nancy. Converter assembly workshop in Massy. Engineering and R&D centres in Belfort and Massy.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

G

GEOTECGeotechnical surveys and foundations

9 boulevard de l’Europe, 21800 Quétigny+33 (0)3 80 48 93 20 +33 (0)3 80 48 93 30

www.geotec-sa.com [email protected]

ORGANIZATION

Géotec has been manufacturing and selling tools specifically for soil and foundation studies since 1985.

ACTIVITIES

Géotec provides services and consulting in two main areas:

• Building and civil works: mechanical soil services, foundation and geology studies, including in situ surveys and testing• Underground water and the environment (specifically, landfill and contaminated soil): hydrogeology services and environmental studies, including water regulations, impact studies, pollution diagnostics, and sampling of polluted soil.Géotec generally works in two phases:

• In situ surveys and testing by field teams• Analysis and study of survey data performed by engineers, followed by a study report.

LOCATIONS

Géotec currently has around twenty offices and subsidiaries throughout France.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

G

GEOTECH INDUSTRIESManufacture of large cast parts

2 rue de Flandres, ZI du Drout, Local 5.12, 68100 Mulhouse+33 (0)3 89 43 13 10 +33 (0)3 89 60 14 02

www.geotech.fr [email protected]

ACTIVITIES

Geotech Industries specialises in the study, manufacture and sale of industrial parts and assemblies. It works in the automotive, aerospace, railway, military, defence, and telecommunications industries.

LOCATIONS

Alsace.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

G

GINGER CEBTP SUBSIDIARY OF GINGER GROUP-

Geotechnical surveys, expert assessment, project management, inspections, analysis

12 avenue Gay Lussac, ZAC La Clef-Saint-Pierre, 78990 Elancourt+33 (0)1 30 85 24 00 +33 (0)1 30 85 24 30

www.ginger-cebtp.com [email protected]

ORGANIZATION

Ginger CEBTP is a company specialising in building assessment and civil works.

ACTIVITIES

Ginger CEBTP is specialised in geotechnical surveys for: marine construction, civil engineering structures, masonry mechanics and masonry pathology, geotechnics and structural restoration. Ginger CEBTP is proud to offer the following:• Expert assessment, engineering, turnkey projects, and maintenance,• A unique synergy of knowledge drawn from engineering offices, analysis, testing, and inspections laboratories,• The ability to execute any project related to the design, construction, and maintenance of infrastructure and equipment to help improve the quality and safety of living conditions,• An offer and global project management coordinated by a single contact person, for more efficient communication at all stages of work and greater reliability in project execution, for both project management and turnkey projects.

LOCATIONS

Ginger CEBTP has a network of nine regional centres and 45 offices in France with over 900 employees.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

G

GKN STROMAG FRANCE - SIME BRAKES SUBSIDIARY OF GKN LAND SYSTEM-

Manufacture of disc brakes

Avenue de l’Europe, 18150 La Guerche-sur-l’Aubois+33 (0)2 48 80 72 72 +33 (0)2 48 74 05 24

www.stromagfrance.com [email protected]

ORGANIZATION

Stromag France is a company wholly-owned by GKN Land System. Founded in 1927, GKN Stromag France has 160 employees and is the world leader in industrial disc brakes. GKN Stromag France exports over 60% of its production through its subsidiaries, agents and distributors worldwide.

ACTIVITIES

The company is the No.1 on the industrial disc brake market. The GKN Stromag adventure started in 1927 with the creation of SIME. Originally a manufacturer of electromagnetic separators for the mining and steel industries, the company soon expanded into designing industrial brakes. It began selling jaw brakes in 1945, then introduced the first industrial disc brakes to the steel industry in the early 1960s. Thanks to its consistent focus on the evolving needs of the market and the desire to orientate its development around quality, innovative products, the company’s reputation has spread rapidly, reaching every continent. Today, 60% of its turnover comes from exports. SIME operates in fast-growing markets, such as wind power and port logistics, as well as in traditional industries, such as steel, nuclear, and passenger transport, and has acquired skills of world renown.

LOCATIONS

Centre.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

G

GROUPE INICIA - FLUIDEXPERT / NOVIUMPower transmission and control systems

21 rue Ampère - ZA les Blettrys - BP 70314, 71530 Champforgueil+33 (0)3 85 47 89 00 +33 (0)3 85 41 69 28

www.hydro3m.fr [email protected]

ORGANIZATION

SARL (French limited liability company) with 97 employees.

ACTIVITIES

Fuidexpert/Novium is a specialist in industrial hydraulics and power transmission via pressurised fluids up to 1,200 bars for stationary installations. • Sale of hydraulic and pneumatic spare parts and accessories• Troubleshooting and repairs of hydraulic parts• Design, manufacture, and installation of hydraulic power plants, entire industrial automation assemblies and didactic benches• Preventive maintenance at industrial sites• Training of clients in hydraulics. Certified teaching body since 1994• Activities specific to EDF equipment• Railway specialist.

LOCATIONS

Burgundy. Rhône-Alpes. Paris area and South-West.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

G

GROUPE PRESTIA SUBSIDIARY OF PROTECTOR-

Surface treatment : hot dip galvanizing & powder coating

Z.I la Gare, 56460 La Chapelle Caro+33 (0)2 97 74 76 56 +33 (0)2 97 74 81 37

www.prestia.fr [email protected]

ORGANIZATION

Anti-corrosion surface treatment specialist (hot dip galvanizing + powder coating). Prestia is a leader in the north of France. Prestia guarantees a high quality level, large services offers (container, packaging, training, audits, etc.).

ACTIVITIES

Hot dip galvanising, powder coating, shot-blasting, metallisation, dedicated logistics. Prestia is well recognized for duplex treatments (anticorrosion + esthetics). Prestia offers you an offshore specific treatment. We are qualisteelcoat labelized.

LOCATIONS

Prestia is a leader in the north of France.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

G

uertonGUERTON SUBISDIARY OF NAWI GROUP-

Heavy boilermaking - Storage silos - Manufacture of parts for wind turbine masts

Z.I. Saint Gilles RN 10, 28800 Bonneval+33 (0)2 37 97 56 00 +33 (0)2 37 96 22 36

www.guerton.com [email protected]

ORGANIZATION

Guerton is one of the companies in the Nawi Group specialising in heavy boilermaking. Guerton currently employs 70 men and women with the skills and expertise necessary to respond promptly to clients’ needs and the motivation to satisfy them. Guerton has been qualified by GSI-SLV Saabrücken to execute steel structures in accordance with standards EN 1090-1 and 1090-2 and by DEKRA for its ISO 9001 quality management system.

ACTIVITIES

Guerton is acknowledged for its experience in three main areas of activity: the manufacture of storage silos, pressure devices, and sheet metal constructions. Guerton has also decided to diversify into the promising onshore and offshore renewable energy markets, manufacturing wind turbine mast bases. To date, the company has produced more than 400 turbine mast bases of 3 to 4.5 m in diameter and 25 to 50 mm thick. All processing operations take place in its workshop, including oxy-acetylene sheet metal cutting, rolling of cylindrical and conical sections, approach, welding, non-destructive testing, flange facing for tight tolerances, shot-blasting and surface treatments, welding and assembly of internal parts (platforms, railings, etc.), and storage at farms.

LOCATIONS

Guerton is located 100 km from Paris, in Eure-et-Loir. The site covers 60,000 m2 of land and includes 10,000 m2 of workshops.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

X

g r o u p enawi

.t.im a i n t e n a n c e

��

��

��

��

��

��

��

irod sisa��

��

��

�� !�� "��

#��

��

$��

"��

�� !"�#$%&'() *&+

%&� ��'�()*(+)+�'� �

��,�-

.�/�#* *#*�� 0*)11*111�2�#��/�3+4�(56�1+3��#�� #�'�7��8��$9��'�():� !��$��'�+;4(1�# ��'-./�8< .

=>/�'�� /

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

H

HAWE-OTELEC SAS SUBSIDIARY OF HAWE HYDRAULIK SE-

Manufacturer of hydraulic systems and components

13 rue des Pyrénées, ZAC du Bois Chaland - CE 561, 91256 Evry cedex+33 (0)1 69 47 10 10 +33 (0)1 60 79 20 48www.hawe.de [email protected]

ORGANIZATION

HAWE Hydraulik has been designing and producing quality hydraulic parts for targeted markets for 60 years. HAWE Hydraulik has a worldwide presence, with 1,800 employees in its 13 subsidiaries and 30 distributors.

ACTIVITIES

HAWE Hydraulik’s exclusive use of steel for all its pressurised parts means that they can operate at high pressure and have an extended lifespan in a compact assembly. Its leakless check valves are safe and energy-efficient. The modular assembly of its constructions facilitates maintenance. The compactness and moderate weight of the units mean no special handling equipment is required. The main components used in the wind power industry are compact power plants, high-pressure radial piston pumps, poppet valves, hydraulic manifolds (study and manufacture of), and cartridge valves.

LOCATIONS

French head office in Evry (Essonne), with regional sales engineers and a network of partners.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

H

HUTCHINSON SUBSIDIARY OF TOTAL-

Design and manufacturing of flexible connections and/or antivibration systems

2 rue Balzac, 75384 Paris cedex 8+33 (0)3 89 39 60 15 +33 (0)3 89 39 89 62

www.hutchinson.fr [email protected]

ORGANIZATION

Founded in 1853, HUTCHINSON is partner of the world’s top manufacturers dealing with safety, energy management, reliability and comfort. Its close-to-customer technical centers design and produce a complete array of components and systems using elastomers, other polymers and composite materials in 4 main activities: Sealing, Fluid Transfer, Thermal, Vibration and Acoustic Insulation, Mobility and Transmission.We have been widely involved in advanced technologies, particularly related to Marine activities: Navy, Offshore Oil&Gas...

ACTIVITIES

We provide a full range of rubber products for motion, shock, vibration and sealing control in the most severe environment. We promote innovative solutions adapted for any current and future developments dedicated to Marine Renewable and Wind Energies. Potential main applications are: Articulations for high cycling load and pressure, Anchoring devices, Bending restrictors, Fenders, Gearbox Mounts, Installation assistance devices, Vibration and shock AbsorbersMain advantages of our solutions are:

• Easy to install and to use• Performance and reliability• Life duration, high operating fatigue resistance• Free of maintenance and of operating cost

LOCATIONS

HUTCHINSON provides a wordlwide footprint through its 95 locations in 23 countries. More specifically, its French subsidiaries Paulstra and Techlam offer dedicated to wind energy applications.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

H

HYDACManufacture of filtration and cooling systems

Technopôle Forbach Sud - BP 30260, 57604 Forbach+33 (0)3 78 29 26 00 +33 (0)3 87 85 90 81

www.hydac.fr [email protected]

ORGANIZATION

With over 7,000 employees worldwide, Hydac is a leading company in the field of fluid technology, hydraulics, and electronics.

ACTIVITIES

Hydac works on cooling and filtration systems for nacelles and for cable attachments inside wind turbine masts. As a systems and fluids specialist, Hydac offers à la carte services ranging from cleaning to comprehensive maintenance, including system optimisation. Hydac strives to increase machine availability and reduce breakdowns. Hydac’s components are found in many wind turbines around the world and include complete systems and filtration concepts for lubrication and hydraulics, cooling systems for transmission fluid and generators, and cable attachment systems inside turbine masts.

LOCATIONS

Geographical coverage throughout France. Head office in Lorraine (Forbach). Offices in the Paris area, Lyon, Aix-en-Provence, Bordeaux, and Montbéliard.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

X

��

�� !� ��"�� "��"��"�# ��$��"��$ %�� &�� !��

��'�(��" #�$�%&�'(�)*�)+�%'��,��#��"�"��

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

H

HYDRATIGHT SAS SUBSIDIARY OF HYDRATIGHT LIMITED, ACTUANT GROUP-

Bolted assembly solutions and machining services

49-53 rue Salvador Allende, 95870 Bezons+33 (0)1 34 10 57 17 +33 (0)1 34 10 50 81www.hydratight.com [email protected]

ORGANIZATION

Hydratight has been providing world-class bolted assembly solutions and machining services to the oil and gas, energy production, industry, aerospace, and subsea sectors for over 30 years.Hydratight develops and sells products designed for the needs of the wind power sector. These products enable wind turbine manufacturers to satisfy customer demand by reducing bolting times and achieving accurate bolt loads, first time.

ACTIVITIES

Hydratight sells and hires out:• Hydraulic clamping solutions for bases, masts, and nacelles: hydraulic wrenches and hydraulic tensioners• Hydraulic gensets• Ultrasound measurements• On-site machining services• Training

LOCATIONS

Hydratight operates around the world through a network of 35 strategic sites and a team of 1,000 employees.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

H

HYDROGEOTECHNIQUEGeotechnical, geological, hydrogeological, and hydrological engineering applied to

buildings and the environment. Civil engineering, infrastructure, surveys, in situ and

laboratory soil tests

28/30 avenue Jacques Anquetil - BP 90226, 95192 Goussainville cedex+33 (0)1 34 38 73 63 +33 (0)1 39 88 58 23

www.hydrogeotechnique.com [email protected]

ORGANIZATION

Société Anonyme (Limited liability company).

ACTIVITIES

Backed by a 70-strong team of engineers, Hydrogéotechnique is a specialist in geotechnical engineering. It performs all geotechnical tasks, G11 and G12 geotechnical feasibility, G3 project execution, G4 geotechnical supervision, and G5 geotechnical diagnostics. It has the capabilities to perform investigations in situ (56 units) or in a laboratory (10 units).

LOCATIONS

Twenty-four regional offices across France (excluding overseas departments and territories).

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

H

HYTORCTorque tightening tools, hydraulic wrenches

18 avenue de la République, 91370 Verrières-le-Buisson+33 (0)1 69 20 01 53 +33 (0)1 73 76 89 16

www.hytorc.fr [email protected]

ACTIVITIES

Development, sale, hiring, on-site assistance, and training in hydraulic torque-tightening tools:• Hydraulic torque wrenches• Pneumatic and electric drills• Impact sockets and bolting accessories• Mechanical tensioners and reaction washers.With 40 years of experience and over a hundred patents filed for hydraulic torque wrenches, HYTORC can be considered to have set the bar for high-power torque tightening. Whether you are a manufacturer, installer, or maintenance provider, HYTORC’s teams are ready to help you with your requests for development, special programmes, etc. With most varied and comprehensive line of products on the market, we will find a solution together. We can also create tools for you that are specially adapted to your technical needs and safe and ergonomic to use. We can help you develop customised use sheets and provide preventive maintenance and after-sales service for our tools at our own centres.

LOCATIONS

HYTORC operates throughout France via representatives and regional offices:• Brittany, Nord, and Île-de-France: Le Mans (Pays-de-la-Loire)• Port-de-Bouc (Provence-Alpes-Côte d’Azur)• Central east: Tassin-la-Demi-Lune (Rhône-Alpes)• Southwest: Saint-Loubès (Gironde).It also operates in Europe and worldwide.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

I

IDEA LOGISTIQUE SUBSIDIARY OF IDEA GROUPE-

Industrial Supply Chain logistics provider

ZAC de Cadréan - BP 55, 44550 Montoir-de-Bretagne+33 (0)2 40 90 70 25 +33 (0)2 40 00 12 56

www.idea-groupe.fr [email protected]

ORGANIZATION

S.A.S. with assets of 1,270,000 €, IDEA Logistique is subsidiary of IDEA Groupe with 76 M€ turnover in 2012 and 750 employees.

ACTIVITIES

Industrial Supply Chain logistics provider for specific and sensitive products, IDEA offers comprehensive and dedicated solutions. Strengthened by ten years of experience in the energy market, IDEA works with its customers on traditional sectors (nuclear, power stations...) as well as promising new markets such as off shore windmills or solar energy. IDEA is a partner for projects of leading actors such as ALSTOM, AREVA, EDF, MAN, SYSTOVI...Our activities: Project engineering, Management and IT systems, Subcontractor management, Customer Service, Supplier/Vendor-Managed inventory, Supply of assembly lines, Production outsourcing, Stock management, Preparation of Orders, Kitting, Delayed differentiation, Shipping Management, In situ and Ex situ operations. IDEA daily manages flows of offshore windmills components and we rely on a solid network of partners who have additional specific competencies.

LOCATIONS

• French west region (Nantes, Saint-Nazaire, Cherbourg)• Ile-de-France (South of Paris)• French north region (Lille)• French South West region (Toulouse)• French South East region (Lyon)

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

I

IDEOLFloating foundation solutions for offshore wind farms

Espace Mistral Bât. B - 375 avenue du Mistral, 13600 La Ciotat+33 (0)4 86 20 80 50

www.ideol-offshore.com [email protected]

ACTIVITIES

IDEOL specialises in designing and installing new foundation solutions for offshore wind farms. Based in La Ciotat in France, IDEOL has extensive experience in renewable energy and industries related to offshore oil and gas. In particular, it develops floating foundation solutions based on its patented Damping Pool® technology aiming to achieve a major transformation of the offshore wind energy potential, regardless of depth. IDEOL has received the Tremplin PME Innov’Eco award, the 2012 Cleantech Republic grand prize, the Trophée 2012 innovation award for the Aubagne-La Ciotat development area, and a prize at the national competition for the creation of innovative technology companies, held by the Ministry of Research in 2011.

LOCATIONS


PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

I

IFM ELECTRONICManufacturer of CMS solutions (vibration analysis)( y )

Immeuble Uranus, 1-3 rue Jean Richepin, 93192 Noisy-le-Grand cedex+33 (0)8 20 22 30 01 +33 (0)8 20 22 22 04

www.ifm.com/ifmfr/web/home.htm [email protected]

ORGANIZATION

IFM ELECTRONIC is an international group specialising in the manufacture of electronic sensors. We have over 3,000 employees and are present in 70 countries around the world.

ACTIVITIES

IFM offers a various ranges of products for the wind power industry: • Condition monitoring systems and vibration analysis systems• Pressure sensors and transmitters• Temperature sensors and transmitters• Level probes• Inductive sensors• Safety sensors• Rotation controllers• Encoders• Switched-mode power supplies• Connectors with shielded cables

LOCATIONS

Pays de la Loire, Rhône-Alpes.Nantes office: Parc d’activité EXAPOLE, Bâtiment D, 275 boulevard Marcel Paul, BP 90397, 44819 Saint-Herblain cedexLyon office: “Bois des Côtes II”, 304 Route Nationale 6, 69578 Limonest cedex

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

X

© E

NERTR

AG

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

I

IN VIVOOceanography and marine environment consultancy

ZA La Grande Halte, 29940 La Forêt Fouesnant+33 (0)2 98 51 41 75 +33 (0)2 98 51 41 55

www.invivo-environnement.com [email protected]

ORGANIZATION

IN VIVO is a 30 people oceanographic and marine environmental consultancy company created in 1997. Working in the field and availing of extensive facilities at sea and a wide range of instrumentation, IN VIVO is autonomous and efficient right from the initial collection of data at sea. IN VIVO specialises in data collection, processing, interpretation and use, in particular presentation of cartographical data (GIS), and project management and execution of surveys.

ACTIVITIES

IN VIVO provides studies and services for coastal works project developers as marine renewable energies and harbour works. With extended and multidisciplinary knowledge of marine environment and a strong field experience, IN VIVO has been involved in offshore windfarms, tidal turbines and ocean wave energy projects development since 2006, from pro-project site surveys to legal authorization reports and environmental monitoring.Hydrography, geophysics, currents, sediments, marine fauna and flora expertise, ornithology, acoustic noise measurement: IN VIVO specialist teams work in the field with state of the art equipment at sea. A leading consultancy company, with strong experience and knowledge of marine environment, IN VIVO watches carefully the evolutions of regulations and techniques to carry environmental impact assessment and regulatory studies required by the authorities. IN VIVO also specializes in artificial reefs, fishing preservation and Natura 2000 inventories and spends 20% of its time on R&D on its expertise areas.

LOCATIONS

La Forêt Fouesnant, Brittanny.Carqueiranne, Provence-Alpes-Côtes d’Azur.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

I

INGETEAM SASManufacturer specialising in power electronics

140 rue Carmin - Le Naurouze C, 31670 Labège+33 (0)5 61 25 00 00 +33 (0)5 61 25 00 11www.ingeteam.com [email protected]

ACTIVITIES

Manufacturer of inverters for the wind and photovoltaic power industry, wind generators, electronic automation for renewable energy, and turnkey solutions for biomass, biogas, hydroelectricity, smart grids and thermodynamic solar power, wind turbine and photovoltaic panel maintenance, grid voltage regulation, battery storage systems, power grids in remote areas, and electric vehicle chargers.

LOCATIONS

Midi-Pyrénées.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

X

[email protected]

www.ingeteam.com

READY FOR YOUR CHALLENGES

Experience in wind. Service partnership.With + 3 GW of Wind Installed Capacity O&M projects worldwide, Ingeteam Service can provide you flexible solutions for wind farm Services. Since 1999 Ingeteam Service has been immersed in the Renewable Maintenance Sector, gaining an intense technical background.

The formula of the new energy

� Wind Maintenance and Exploitation � End of Warranty Audits � Blades Services � Spare parts supply

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

I

ITRON SUBSIDIARY OF ITRON INC.-

Design and manufacture of electrical components

Avenue des Temps Modernes, 86361 Chasseneuil-du-Poitou+33 (0)5 49 62 70 00 +33 (0)5 49 62 70 89www.itron.com [email protected]

ORGANIZATION

Itron is the world leader in the supply of intelligent metering technology, data collection systems, and software solutions for water and energy distributors.

ACTIVITIES

We are the world’s number one provider of solutions for intelligent metering, data collection, and metering data management. Nearly 8,000 distributors around the world trust us to help them optimise their water and energy supply and consumption. We offer electricity, gas, water, and thermal energy metres, communication infrastructure and systems for metering data collection (AMR and AMI), data management software solutions and services such as project management, installation, and consulting.We sell innovative solutions to help integrate electricity produced by wind- and photovoltaic-powered production sources while ensuring that grids remain completely safe and stable.

LOCATIONS

Poitou-Charentes.Itron has been strongly established in France for over 130 years, with six production sites, an administrative/sales office, four research and development centres and over 1,000 employees.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

J

JADEWork at height, training and design safety systemsg g g y y

9 rue des Lainiers - P.A. du Beck, 59150 Wattrelos+33 (0)3 20 68 99 47 +33 (0)3 20 68 99 48

www.reseau-jade.com [email protected]

ORGANIZATION

JADE is a work at height and safety consultancy business which has been holding expertise in these fields for 16 years. JADE supplies 3 complementary services which offer a package solution for safety in work at height and rescue:• Quality rope access, work at height and safety systems supplying• Specialist safety training centre – real technology training facilities with access to a 330ft high windmill• Fall arrest systems – design and supplyJADE’s fifty technicians are ready to step in anywhere in France, Belgium, Luxemburg and the Netherlands, offering top quality and safe work at height at a good rate.JADE - MASE, VCA, QUALIBAT 1452, COFREND certifications.JADE – a firm with assets of 1.2 million euros realizing a 5.5 million euro turnover.

ACTIVITIES

• Development:

Safety system devising and supplying (innovative anchorage system Ancravie, ladders with safety rails, ...)• Engineering:

Fitting the blades together - Setting up fall protection safety sytems : access ladders, anchorage points, life lines – supervising all services (set up and maintenance)Setting up elevators and access help systems• Maintenance:

JADE’s work teams provide clients with maintenance for all work at height - confined spaces and dangerous work environment - Supervising and repairing blades - Welding – checking on PPE (COFREND Certification level 2) - Anti-corrosion paint - Non-destructive control – concrete and steel thickness, ...Yearly checking on fall protection equipment and safety systems• Training:

330ft high windmill at JADE’s training facilities for practical exercises: access at height, rescuing and evacuating people - Rope access training (IRATA, CQP1, CQP2)

LOCATIONS

Lille, Dunkerque, Auray, Grenoble, Brussels.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

J

JAMES WALKERManufacture of mechanical parts

ZI Le Tronchon BP36, 17 rue Jean Elysée Dupuy, 69542 Champagne-au-Mont d’Or cedex

+33 (0)4 37 49 74 80 +33 (0)4 37 49 74 83www.jameswalker.biz [email protected]

ACTIVITIES

Designer and builder of sealing systems:• Research and production of high-performance elastomers• Development of designs for specific applications• Numerous patented products, like the Rotabolt®, a bolt tension control system.As a technical expert, JW:• Helps clients upgrade their technology• Offers comprehensive solutions that include designs, plans, and mounting the seals.

LOCATIONS

Rhône-Alpes.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

J

JEFMAGWelding, Machinning, Painting and Stucture Assembly - Subcontracting, co-

development, execution

41 boulevard des marchandises, 85260 L’Herbergement+33 (0)2 51 42 86 72 +33 (0)2 51 42 47 34

www.jefmag.fr [email protected]

ORGANIZATION

Jefmag is an equipment manufacturer supplying components and complete assemblies to its customers.Jefmag is located in the West of France, south of Nantes. In a 15 000 m² workshop, Jefmag produce welded, machined, painted and assembled technical structures. Since 1977, thanks to its industrial know-how and equipment, Jefmag has been assisting its customers from the design to the manufacturing stage, guaranteeing that their quality, cost and timeline requirements are met.

ACTIVITIES

PRODUCTION:

To mass-produce parts from 5 kilos to 5 tonnes in weight, and up to 7,50m in length, Jefmag has a wide range of state-of-the-art equipment, which are operated by trained personnel.We have: • Bending and forming presses, • 10 robot welding stations, • 60 manual welding stations, • 10 machining centres, • Dynamic and static paint facilities, • An assembly workshop.QUALITY:

Jefmag has obtained certifications which guarantee that your quality requirements are met: • ISO 9001 for the quality management system ; • NF EN 15 085 class 1 for our welding know-how.CUSTOMER SUPPORT:

Jefmag assists its customers from design to deliveries by even studying logistics solutions to make deliveries directly to assembly sites.

LOCATIONS

Jefmag is located in Vendée, a few kilometers from Nantes, St-Nazaire or Noirmoutier.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

J

JEUMONT ELECTRIC SAS SUBSIDIARY OF ALTAWEST GROUP-

Electromechanical construction

367 rue de l’Industrie - BP 20109, 59572 Jeumont cedex+33 (0)3 61 99 96 00 +33 (0)3 61 99 97 33

www.jeumontelectric.com [email protected]

ORGANIZATION

Société par Actions Simplifiée (simplified private limited company) with a capital of €16,498,592 - Valenciennes Trade and Companies Register 444 571 772.

ACTIVITIES

Design and construction of complete electrical systems (alternators, controls, and converters) for high-power onshore and offshore wind turbines (1 to 6 MW).

LOCATIONS

Jeumont Electric Maintenance (Nantes, France); Jeumont Drives Systems (Etupes, France); Jeumont India (Mumbai); Jeumont Middle East (Abu Dhabi).

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

J

JIFMAR OFFSHORE SERVICES SASShipowner and Marine contractor

18 quai Malbert, 29200 Brest+33 (0)4 86 82 03 60 +33 (0)1 73 72 95 85

www.jifmar.com [email protected]

ORGANIZATION

Vessels’s armament, design and achievement of complex maritime projects for the Department of Defence, MRE, Oil&Gas and maritime transport of heavy package in France, North Sea, Baltic Sea and Africa.

ACTIVITIES

Inspection, maintenance and repair of surface and underwater systems (pipes, cables, buoys, etc.). Salvage and debris recovery. UXO survey. Consulting and assistance to project owner maritime projects.

LOCATIONS


PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

K

KEOPS AUTOMATIONSupervision of energy production installations

Espace Performance - 2B avenue Jean Rouxel, 44481 Carquefou cedex+33 (0)2 28 232 555 +33 (0)2 51 13 14 90

www.keops-performance.com [email protected]

ORGANIZATION

Keops Automation specialises in monitoring rotating machinery, mainly for the power production sector. A designer and provider of turnkey systems, Keops Automation offers innovative solutions to maintain equipment in working order and to assist operation using appropriate dashboards.

ACTIVITIES

Keops Automation is leading the HYPERWIND project, which consists in developing a complete monitoring system for onshore and offshore wind farms, and more generally for installations classed as marine renewable energy. Its mission is to provide wind farm operators with a dynamic, systemic view of their installations and of their entire farms to ensure efficient maintenance and optimise performance. Keops Automation also works alongside machine manufacturers and maintenance providers to design control and command modules for machines.

LOCATIONS

Based in Carquefou near Nantes, Keops Performance operates throughout France and abroad.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

K

KTR FRANCE SUBSIDIARY OF KTR GERMANY-

Mechanical drives

46-48 chemin de la Bruyère, 69570 Dardilly+33 (0)4 78 64 54 66 +33 (0)4 78 64 54 31

www.ktr.com [email protected]

ORGANIZATION

KTR France is the French subsidiary of KTR Germany. The company has 50 years of experience in mechanical drives and offers couplings for the output side of gearboxes in wind turbines. KTR has an annual turnover of €6 million in France and over €100 million for the company as a whole.

ACTIVITIES

KTR has been designing and manufacturing wind turbine couplings since 1988 and has equipped more than 25,000 turbines, ranging from 250 kW to 6 MW worldwide.RADEX-N couplings feature steel laminae and fibreglass spacers with brake discs to correct misalignment, provide electric insulation, and reduce overloads through the inclusion of a RUFLEX torque limiter.KTR France provides these couplings for new builds and as spare parts, as well as brake pads and callipers for after-sales service and maintenance.

LOCATIONS

Rhône-Alpes.KTR has locations around the world, with more than 20 subsidiaries and numerous employees and distributors on every continent.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

L

LA FONTE ARDENNAISECast iron - Machining - Painting

22 rue Joliot Curie, 08440 Vivier-au-Court+33 (0)3 24 53 64 70 +33 (0)3 24 52 77 57

www.la-fonte-ardennaise.com [email protected]

ACTIVITIES

La Fonte Ardennaise is an expert in smelting, machining, and assembly processes.

LOCATIONS

Champagne-Ardenne.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

L

LEROY-SOMERGenerators and motors for backup equipmentp q p

Boulevard Marcellin Leroy - CS10015, 16915 Angoulême cedex 9+33 (0)5 45 64 45 64 +33 (0)5 45 64 45 04

www.leroy-somer.com [email protected]

ORGANIZATION

Leroy-Somer is the world leader in industrial alternators and one of the top suppliers of electronic and electromechanic drivetrain systems worldwide. A subsidiary of the Emerson Group, Leroy-Somer is a French company with 9,300 employees across 30 production units and 470 points-of-sale and service worldwide. In 2012, it achieved a turnover of €1.342 billion. A veteran in energy savings and motorisation for low-emission vehicles, Leroy-Somer is continuing to invest in environmental technologies in accordance with the principles of sustainable development.

ACTIVITIES

Leroy-Somer products are made in ISO 14001-certified plants. It is an active participant in the production of electricity from renewable sources, including:• Solar: photovoltaic inverters and drivetrain systems for trackers• Wind/water: generators and motors for backup• Hydroelectricity: alternators and generators• Biomass: alternators for cogeneration systems

LOCATIONS

Poitou-Charentes.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

L

LINAK FRANCE SUBSIDIARY OF LINAK A/S GROUP (DENMARK)-

Manufacturer of low-voltage, electric linear actuators

13 rue de la Claie, 49072 Beaucouzé cedex+33 (0)2 41 36 34 34 +33 (0)2 41 36 35 00

www.linak.fr [email protected]

ORGANIZATION

A French subsidiary of the Danish company LINAK, LINAK France is present in 35 countries and has 1,700 employees. LINAK specialises in industrial automation, solar tracking, and MV circuit breaker switches, putting its expertise at the service the wind power sector.

ACTIVITIES

LINAK offers an alternative to hydraulics through its line of energy-saving electric motors. The company has over 10 years of experience in wind power. Its powerful, compact, maintenance-free solutions with multiple integrated sensors are used to improve the reliability of systems such as automatic bearing lubrication, pitch locking, rotor locking, sluice gate activation, and opening/closing of hatches. LINAK actively participates in optimising weight and noise and meeting size-efficiency goals.

LOCATIONS

Based in Pays de la Loire, operations nationwide.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

L

LOUIS DREYFUS ARMATEURSThe partner you can trust for your maritime challengesp y y g

28 quai Gallieni, 92158 Suresnes cedex+33 (0)1 70 38 60 00 +33 (0)1 70 38 60 01

www.lda.fr

ORGANIZATION

The Louis Dreyfus Armateurs group (LDA) is a French, family-owned group that provides maritime transport and services. Its head office is in France. It is present worldwide and has 2,000 sea-going and shore-based employees. The development of shipping under the French flag is central to the strategy of the LOUIS DREYFUS ARMATEURS group.

ACTIVITIES

The LOUIS DREYFUS ARMATEURS (LDA) group is one of the world’s leading players in the transport and the logistics of dry bulk cargo, with a fleet of around 30 freighters and logistics resources. A well-known traditional and offshore port operator, it is your ideal partner for innovative logistics around the world. It also specialises in industrial technological partnerships (underwater cable-laying with Alcatel-Lucent, offshore seismic research with CGG, transport of heavy specialised packages with Airbus, etc.) and other offshore services, including offshore towing of industrial installations and rescue operations (Fairmount Marine). A pioneer in the “Motorways of the sea” concept, LDA is a major player in vehicle and passenger transport in Europe in partnership with Danish company DFDS. Louis Dreyfus Travocean is a wholly-owned subsidiary of the Louis Dreyfus Armateurs group specialising in underwater work, in particular the installation, burying, and protection of underwater cables, in particular for MRE projects.

LOCATIONS

Cherbourg: Cherbourg Terminal Vrac, a specialist in port logistics. Marseille: Louis Dreyfus Travocean (head office) and Nicolas Frères (port handling). Dunkerque: Louis Dreyfus Travocean (operational base). Dieppe, Le Havre, Calais, St-Nazaire, Marseille: ferry terminals.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

X

LUFKIN FRANCE SUBSIDIARY OF LUFKIN INDUSTRIES (LUFKIN, TEXAS - USA)-

Gearbox manufacture and repair, servicing and maintenance

Avenue des Chavannes, 70220 Fougerolles+33 (0)3 84 49 64 00 +33 (0)3 84 49 64 44www.lufkin.com [email protected]

ORGANIZATION

Two sites in Fougerolles: an administrative site and a production site.

ACTIVITIES

Lufkin France specialises in the sale, design, manufacture, repair, and maintenance of gear drive systems, including wind turbine gearboxes.

LOCATIONS

France: Franche-Comté.USA: Texas.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

M

MADEPDesign and production of electrical cabinets

Parc d’activité Bellevues - 2 avenue du Gros Chêne - BP 90209, 95610 Éragny+33 (0)1 34 30 17 20 +33 (0)1 34 64 99 09

www.madep.com [email protected]

ORGANIZATION

Our company is a skilled, experienced, and flexible long-standing player in the energy industry, bringing you products tailored to your installations and electrical equipment. Lufkin France works as a partner to its clients, who come from all areas of the manufacturing industry. We strive to establish long-term relationships, earning clients’ trust and offering the best solutions to suit their specific needs or standards. Our production site in the Eure region is entirely dedicated to making electrical distribution boxes and electronic power systems designed by our technical teams, using best industry practices and in accordance with the current European standards.

ACTIVITIES

In 2005, we began designing and producing electrical cabinets for industrial applications, building and public works. Three years ago, we developed a line of AC and DC junction boxes for photovoltaic installations, ranging from a 3 kW kit to over 250 kW of power in AC cabinets. Based on your data we design wiring diagrams, which we submit to you with a quote. We can deliver standard 3 kW kits from our stock. We are particularly stringent about quality control and pay close attention to current norms and their changes in the areas of switchgear, lightening arresters, and wiring.

LOCATIONS

Île-de-France.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

M

MANCHE MARINE INDUSTRIE SUBSIDIARY OF FIPAM GROUP-

Shipbuilding and naval repairs, industrial boilermaking

19 rue Charles Blound, 76200 Dieppe+33 (0)2 32 90 56 00 +33 (0)2 35 84 28 36www.mim-dieppe.fr [email protected]

ORGANIZATION

• A société anonyme (Limited liability company) with 45 full-time employees and 15 fixed-term and temporary employees• a turnover of €3.2 billion; a surface area of 25,000 m2, 10,000 m2 of which is indoors; 2 assembly halls measuring 60 m x 20 m and 75 m x 15 m• 1 NC calculation and programming unit• 1 NC oxy-acetylene cutting machine, 25 m x 7 m and 0 to 300 mm• 1,200-tonne hydraulic press brake, 4 m for thin sheets• 1,300-tonne and 1,400-tonne hydraulic arch press• 1 pyramid roll with rolling width of 7,200 mm x 14 mm and diameter 710 mm, sheet pinched by moving lower rolls, cone and cylinder rolling• 2 40-tonne tower cranes• 12 bridge cranes from 5 to 20 tonnes• 1 vacuum spreader with vacuum pump, 3-tonne and 5-tonne• 2 inclined planes for launching and removing from water• 2 slipways (with width capacity of 33 m)• and 1 railway connected to the SNCF rail network.

ACTIVITIES

Subcontracted shipbuilding and repair for offshore wind farms. Metallic structures for manufacturers of wind turbines and hydro-kinetic turbines.

LOCATIONS

Upper Normandy.Dieppe, Le Havre, Rouen, and the Paris area.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

M

MANOFFSHORE SUBSIDIARY OF TERMINAUX DE NORMANDIE ET HUMANN & TACONET-

Port & marine services to the wind offshore industry

73/75 quai de Southampton, 76600 Le Havre+33 (0)2 35 19 39 89 +33 (0)2 35 19 39 78www.manoffshore.fr [email protected]

ORGANIZATION

MANOFFSHORE emerged in 2010 from the initiative of two leading companies of the french maritime sector, to build up a strong provider of Port and Marine services, dedicated to the developpers of offshore wind parks in the Atlantic, English Channel, North and Irish Seas.HUMANN & TACONET stands as the leading independant port agency in France, with 12 fully manned offices all along the french coast. Handling more than 3,500 ships call annually in french ports, Humann & Taconet boasts of a reputed name amoung european and worldwide shipowners and shipping companies, but also major energy and commodity trading houses, heavy industries, etc. The company is also involved in overseas freight forwarding activities, and offers customs clearance,and storage services. TERMINAUX DE NORMANDIE is the leading port terminal operator in France. Handling 2 million TEU’s, 250,000 vehicules and 90,000 tons of general cargo and heavy lifts annually in Le Havre, the company is also involved in operations of river terminals, and barge shipping operations on the rivers Seine and Rhône, though various partnerships.

ACTIVITIES

A one shop concept, Manoffshore offers in one single organisation a concentrate of expertise and experience in all aspects of port operations, and project cargo logistics, including chartering of vessels, pontoons, tugs and barges, management of port terminals dedicated to pre-assembly and handlings of heavy pieces, shipping agency, customs formalities, wharehousing, etc.... The purpose of the company is to mutualize heavy handling equipments in one single hub, in order to reduce the operating costs for the developpers of offshore wind parks and their subcontractors alike, and be an interface between on and offshore operations, throughout the construction phases, and beyond that, the maintenance period.

LOCATIONS

Le Havre.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

M

MANOIR INDUSTRIESManufacture of large parts and metal subassemblies

Route de Guerstling - BP 11, 57320 Bouzonville+33 (0)3 87 39 78 78 +33 (0)3 87 39 78 92

www.manoir-industries.com [email protected]

ACTIVITIES

For many years, Manoir Industries has enjoyed a sound reputation for its technical expertise in the manufacture of high-performance moulded and forged parts and subassemblies. The company is expanding into aeronautics, armament, the petrochemical industry, and nuclear and wind power. Its Manoir Industries Specialties–Forges division offers steel-forged parts with high mechanical properties obtained through: • Stamping (up to 1000 kg – gears, shafts, pinions)• Extrusion (solid and hollow shafts up to 2000 kg)• Ring rolling (crowns up to 2.5 m in diameter)• Open-die forging (shafts, discs, rollers, etc. up to 10,000 kg).M.I.S. produces gears and shafts for wind turbine gearboxes, as well as safety parts intended mainly for the oil and gas-related industries, building and public works machinery, and the railway and energy industries.

LOCATIONS

Lorraine.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

M

MARC S.A. Earthworks and foundations

3 bis rue de l’Industrie, 35730 Pleurtuit+33 (0)2 99 88 41 54 +33 (0)2 99 88 48 47

[email protected]

ORGANIZATION

Marc SA was founded in Brest in 1876. Today, it is a leader in public works in Brittany. Located in Brest, Rennes, Lorient, and Cherbourg, Marc SA draws on the expertise and experience of over 500 employees working in urban, rural, roadway, railway, river, maritime, industrial, and environmental planning.

ACTIVITIES

Fields of activity include:• Networks for drinking water and sanitation• Earthwork• Civil and structural engineering• Building• Urban planning• Marine construction• Scaffolding design and construction• Waste collection, sorting, transport, and recycling of waste• Dredging• Special works• Telecommunication and video communication networks• Construction of wind turbine foundations using reinforced and pre-stressed concrete

LOCATIONS

Brittany.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

M

MASER ENGINEERING SUBSIDIARY OF CRIT GROUP-

Maintenance of industrial processesp

92/98 bd Victor Hugo, 92110 Clichy +33 (0)1 55 46 50 97 +33 (0)1 55 46 00 37www.maser-engineering.com [email protected]

ORGANIZATION

General Management with transverse services: Technical, Commercial, HR, Accounting. 5 regional centers with: Management, Business Officers, Administrative & Operational technicians. Or 400 employees, including 60 productive.The Wind Turbine Division has 45 technicians on the National Territory.

ACTIVITIES

Maintenance of industrial processes is a key and strategic expertise to MASER ENGINEERING.With experience of over 40 years in the profession of operational maintenance and maintenance engineering allows MASER ENGINEERING to provide its customers with a global maintenance offer that meets the requirements of availability of production means and / or exploitation and control maintenance costs.MASER Engineering is specializes in preventive maintenance (maintenance service).MASER Engineering teams, perform the periodic maintenance operations that are defined in the constructors maintenances ranges.Our maintenance offering, decline in different contractual forms according requirements. And MASER ENGINEERING teams intervene in the context of time or annual contract with obligation of means or obligation of results.MASER ENGINEERING has developed its maintenance sectors of renewable energies and especially in the wind thanks to a team of experienced technicians, consisting of 38 persons involved in work such as:• Maintenance engineering (development of maintenance plan) • Monitoring (preventive maintenance) • Repair (corrective maintenance).Our expertise • The maintenance engineering • Centralized management of “wind energy” activity • The expertise of a general and independent maintainer • Monitoring / inspection (preventive maintenance • Repair of generators, multipliers (corrective maintenance) • The contribution of our methods with service lines and optimization of existing plans • Our risk analyzes.Our methods • Rapid interventions through our regional offices throughout the country, as well as assembly workshops and storage available to stakeholders • A team of 40 experienced technicians, qualified and mobile in good physical condition and of all trades, automation, mechanics through the electromechanical • A policy HSE (Health Safety Environment) respected by all our technicians • The protective equipment and special tools periodically checked.

LOCATIONS

Pays de la Loire, Nord-Pas de Calais, Rhône-Alpes, Midi-Pyrénées, Île-de-France. Région Centre Ouest (Allonnes - Saint Nazaire) / Région Nord-Est (Douai-Vesoul) / Région Rhône-Alpes (Poisy) / Région Sud-Ouest (Colomiers) / Région IDF (Roissy-Villaroche).

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

M

MCCF SUBSIDIARY OF SOLETANCHE-BACHY GROUP-

Construction of special foundations

Parc d’affaires Silic, 18 rue des Pyrénées - BP 30519 Wissous, 94623 Rungis cedex+33 (0)1 56 70 27 60 +33 (0)1 56 70 27 61

www.mccf.fr [email protected]

ORGANIZATION

A subsidiary of Soletanche Bachy, the world leader in soil work, MCCF is a civil engineering and foundations company specialising in operations related to the energy industry. Backed by its group’s resources and expertise, MCCF is involved in projects from design to delivery, both in France and abroad.

ACTIVITIES

Over the past 10 years, MCCF has built approximately 250 wind turbine foundations on nearly 45 wind farms across France.

LOCATIONS

Île-de-France.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

X

© W

ese

rWin

d -

Matt

hia

s Ib

erl

er

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

M

MEDIACO LEVAGEHiring of telescopic and crawler cranesg p

17 avenue André Roussin, 13016 Marseille+33 (0)4 91 03 81 91 +33 (0)4 91 09 32 82

www.mediaco.fr [email protected]

LOCATIONS

70 offices in France, including:

Marseille • La Ciotat • Toulon • Cannes • Nice • Fos • Avignon • Manosque • Montpellier • Béziers • Narbonne • Perpignan • Carcassonne • Toulouse • Pau • Bayonne • Agen • Bordeaux • La Rochelle • Angoulême • Nantes • Saint-Nazaire / Brest • Rennes • Angers • Poitiers• Caen • Le Havre • Rouen • Mantes • Paris Sud • Paris Nord • Reims • Valenciennes • Lille • Metz • Nancy • Saint-Avold • Strasbourg • Colmar • Chalampe • Mulhouse • Belfort • Besançon • Dijon • Bourges • Mâcon • Lyon • Saint-Etienne • Clermont•Ferrand • Valence • Grenoble • Orange.Offices in North Africa, including:

Libya • Tunisia • Algeria • Mauritania • Senegal • Niger • Nigeria • Cameroon.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

M

MENARD SUBSIDIARY OF SOLETANCHE FREYSSINET GROUP-

Ground improvement

2 rue Gutenberg, 91260 Nozay+33 (0)1 69 01 37 38 +33 (0)1 69 01 75 05

www.menard-web.com [email protected]

ORGANIZATION

694 employees around the world. Turnover of €178 million. Subsidiaries: United Kingdom, Germany, Poland, Spain, USA, Canada, Middle East, Indonesia, Malaysia, Vietnam, Australia.

ACTIVITIES

Menard offers soil improvement solutions adapted to the soil encountered and to the load.Menard uses 12 techniques:Dynamic compaction, dynamic replacement, stone columns, bimodulus columns, controlled modulus columns (CMCs), vibro compaction, atmospheric (or Menard vacuum) consolidation, vertical drains, jet grouting, soil-bentonite walls, soil mixing, and compaction grouting.Some of these techniques require additional materials, while others do not.Jet grouting can be used to reinforce soil and for underpinning.

LOCATIONS

North, East, Île-de-France, Rhône-Alpes, South, Southwest.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

X

��

!"�#�$$��$%$�� &'�#�$$��%(�()*��+��,-�&�. -&+"/)*-

000/-�&�. 0��/)*-

�� 12&-+)��*-3&)+*� �12&-+)��3"&)�-�� &3+.�4-3&)��*-3&)+*

5*��*"�-6� ��+ 7*.�"�6��*"�-6� ��*�*""�.�7*.�"�6��*"�-68+��*��*-3&)+*� �7�&�.�8&)��-� �8��+)&"�1�&+6

9��*�+�� 1+&3:�&�-�;&""� �5*+"�7+'+�� *-3&)+*��*�+�

;+.��&�-� �5&+��+��.��!*�<+""��%�� ;+.=&�-� ��&&�"�� *-&+&

;+.��&�-� ��*��+"�>�6��&�'��;+.��&�-� ��!"+�!��??�

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

X

© E

iffa

ge C

onst

ruct

ion M

éta

lliq

ue

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

M

MERCERON TPEarthworks

172 rue Carnot - BP 579, 85305 Challans cedex+33 (0)2 51 93 05 87 +33 (0)2 51 35 01 39

www.groupe-merceron.com [email protected]

ACTIVITIES

Merceron TP is a civil works company operating in three main areas of activity: earthwork, roadway construction, and marine construction.

LOCATIONS

Pays de la Loire.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

M

MERSENGlobal expert in electrical specialties and graphite-based materials

2-3 Place des Vosges, 92400 Paris La Défense +33 (0)1 46 91 54 00+33 (0)1 46 91 54 01 www.mersen.com [email protected]

ORGANIZATION

Our 7,000 employees put their skills and passion to serve customers across the globe, in more than 30 countries.

ACTIVITIES

• Manufacturing of carbon brushes, brush-holders, slip rings and signal transfer systems improving the performance of wind turbines. • Manufacturing of overvoltage protection devices, fuse and fusegear, low voltage and high power switches, complete cooling systems for the electrical protection of wind turbines. Mersen specifically invests in renewable energies. Our multiple solutions for the wind industry (encompassing signal transfer systems, carbon brushes and brush-holders, slip ring assemblies, overvoltage protection devices, fuse and fusegear, low voltage and high power switches, cooling of power electronics) have enabled us to become a leading supplier to the Wind Industry, in both the original equipment and replacement markets.

LOCATIONS

Over 50 subsidiaries in France and in the world.Mersen’s addresses in France:• MERSEN France Amiens 10 avenue Roger Dumoulin, 80084 Amiens cedex 2 Tel. : + 33 (0)3 22 54 45 00 - Fax : + 33 (0)3 22 54 46 08web site : www.mersen.com/produits/solutions-electriques-pour-moteurs-et-generateurs.html Email : [email protected] • MERSEN France Gennevilliers 41 rue Jean Jaurès, 92231 GennevilliersTel. : +33 (0)1 41 85 43 00 - Fax : +33 (0)1 41 85 43 15web site : www.mersen.com/produits/solutions-et-materiaux-avances-pour-hautes-temperatures.html Email : [email protected] • MERSEN France St-Bonnet-de-Mure 15 rue Jacques Vaucanson, 69720 St-Bonnet-de-MureTel. : +33 (0) 4 72 22 66 11 - Fax : +33 (0) 4 72 22 67 13web site : www.mersen.com/produits/surete-et-fiabilite-pour-lenergie-electrique.html Email : [email protected]

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

X

�-./�01�2�..-301�3��0�4�51.�10�5��15�!�� !��#�

��/��6�� 7�� /��4�� 5��$�8��

)��%��*+�� +��%��"��"��# ��"��

ELECTRICAL SOLUTIONS TO IMPROVE PERFORMANCE AND RELIABILITY

4��

��5��

��

��

��

��

ENERGY

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

M

METAL DEPLOYE RESISTORDesigns and manufactures power resistors for grounding, capacitor banks, filtering,

rail traction applications, motor control, heating and various electrical products

1 route de Semur, 21500 Montbard+33 (0)3 58 55 58 42www.mdresistor.com

ORGANIZATION

Today, Metal Déployé Resistor has a team of 75 employees, including 25 engineers and technicians, ready to listen to your needs in the following fields: research and development, design, manufacture, testing, shipping, and after-sales service for electrical power resistors.With over half of its turnover coming from outside France, Metal Déployé Resistor is the European leader in load bank construction, filtering, and grounding.

ACTIVITIES

• Load banks (for testing): For testing wind turbine electrical installations under load (under real-life conditions) before connecting them to the power grid. Testing can be performed at total or partial power, with rapid load increase and loss (impacts, loading, load-shedding), with or without varying the power factor of the load.• Neutral grounding resistors (for protection): To connect a transformer’s neutral point to the earth and limit the short-circuit current in the event of a phase-to-earth fault.• Harmonic filter resistors: To eliminate harmonics generated by electronic power converters and provide a clean signal to the power grid. Associated with inductance coils and/or capacitance to form a filter.• Motor control resistors: To gradually start or stop an electric motor (winch, turret, hoists, etc.). Often combined with a frequency variator.

LOCATIONS

Burgundy.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

M

METEODYNCFD wind modeling software

14 boulevard Winston Churchill, 44100 Nantes+33 (0)2 40 71 05 05 +33 (0)2 40 71 05 06

meteodyn.com [email protected]

ORGANIZATION

SAS (French simplified limited liability company) with capital of € 87,800.

ACTIVITIES

Meteodyn develops high-technology CFD wind modelling software and brings consulting services for wind park developers, turbine manufacturers and all actors of the wind farm industry.• meteodyn WT software: wind resource assessment, site suitability and energy optimization. • meteodyn Forecast: short and very short term wind production forecast system. • UrbaWind: wind resource assessment, site suitability specific to urban areas, small wind and community projects.• Consultancy: wind potential studies, technical and economic feasibility reports, operation and maintenance efficiency... Meteodyn is supporting the wind energy industry at every steps, siting, design, management of wind farms.

LOCATIONS

Headquarters based in Nantes - FranceSubsidiaries in Beijing (China), Pune (India) and Philadelphia (USA).

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

M

MICEL SUBSIDIARY OF ADDEV-

Processing and distribution of insulation products and technical films for

industrial use

3 allée Léonard de Vinci - Parc d’activités Stelytec, 42400 Saint-Chamond+33 (0)4 77 29 39 49 +33 (0)4 77 28 39 48

www.micel.fr [email protected]

ORGANIZATION

Micel is the specialist in custom solutions for electrical insulation (flexible and rigid insulation, resins and varnishes, technical adhesives, sheaths, cables, and accessories) for motors, transformers, cables, and electrical switchgear.Micel is a subsidiary of ADDEV specialised in high-performance technical equipment and organised around four main activities: electrical insulation, technical films, glues and adhesives, and composites and plastics.

ACTIVITIES

Micel helps industrial electrical engineering clients choose flexible electrical insulation materials that meet their needs. These materials include Nomex®, polyester Mylar®, Kapton®, Tedlar®, Teflon®, alu-pet, and laminate. Micel delivers custom, finished products (reels, flat rolls, technical parts, kits, etc.) through its service offer, including slitting, decoiling, die-cutting, transverse winding, lamination, hot forming, and ultrasonic welding.For the wind power industry, Micel specialises in electrical insulation for generators and transformers.

LOCATIONS

France (Saint-Chamond and Valence).Poland. Sales offices: Germany, United States, Czech Republic.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

M

MOOGMovement control components and systems

38 rue du Morvan - Parc d’affaires Silic - BP 40417, 94573 Rungis cedex+33 (0)1 45 60 70 00 +33 (0)1 45 60 70 01

www.moog.com [email protected]

ORGANIZATION

Moog is an American company with 9,000 employees and 28 subsidiaries worldwide. It is a manufacturer of high-performance movement control components and systems for industry, aviation, space, and medicine.

ACTIVITIES

Moog manufactures the following products:• Electrical actuators for wind turbine blade positioning• Hydraulic actuators for wind turbine blade positioning• Blade load measurement systems• Environment monitoring systems (ice, lightning, breakage)• Rotor stress analysis software• Electrical slip rings• Fibre optic rotating joints• Hydraulic rotating joints• Solar panel direction actuators

LOCATIONS

Île-de-France, Rungis: Industry.Midi-Pyrénées, Toulouse: Aeronautics.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

M

MOTEURS J.M.Designer, Manufacturer and Distributor of Electric Motors for

demanding environments based on customer specifications

ZI BP 23, 61700 Domfront+33 (0)2 33 30 73 30 +33 (0)2 33 30 14 85

www.moteurs-jm.com [email protected]

ORGANIZATION

MOTEURS J.M. is a producer of choice in Europe of protected electric motors designed for severe environments (temperature, humidity, subsea, salinity, aggressive gas, vacuum, pressure, dust, irradiation, vibration…) in the small to medium range of power (from 10 to 500 KW), based on client’ specification requirements. MOTEURS J.M. designs and manufactures water cooled and air cooled electric motors according to CODAP/DESP, ATEX certifications for clients located all over the world and clients operating in various industries. We are dedicated to bring Quality (reliability-resistance-durability), Adaptability to clients specification (assistance, guidance in motors conception and definition), Reactivity in design (ability to propose and innovate) and Capability in maintaining and refitting motors to our clients.

ACTIVITIES

MOTEURS J.M. produces motors for prominent energy and marine players, such as EDF, AREVA, DCNS… .The company can provide ventilation solution for cooling the generator, spinning of the nacelle (yaw control motors), blade pitch control motors, hydraulic pump motors, mast elevator motors and for all other auxiliary equipments in marine environment.MOTEURS J.M. motors offers a high cooling effiency, compacity and electric performance.

LOCATIONS

MOTEURS J.M. sales all over the world.Its manufacturing plant is located in Normandy, France. It consists in a design department, CNC machines, winding, testing equipments...under a 5,000 square meter manufacturing plant.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

M

MSBGeneral mechanical engineering

409 rue des Frères Lumière, 71000 Macon+33 (0)3 85 20 56 56

www.msbgroup.fr [email protected]

ORGANIZATION

With 150 employees and 200 machines, the MSB Group has a strong presence in Burgundy through its four facilities in Saône-et-Loire, providing full industrial solutions for design, manufacture (mechanical welding, machining, sheet metal welding, pipe systems), assembly, installations and maintenance.

ACTIVITIES

Areas of expertise: general mechanics and mounting, NC machining, sheet metal manufacture, mechanical welding, metal work, industrial boilers and pipe systems, electrical engineering and automated systems, industrial refrigeration, custom-built machinery...

LOCATIONS

Burgundy.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

N

NASS&WIND INDUSTRIEDesign and engineering of bottom-fixed and floating offshore wind farms

1 rue Henri-Honoré d’Estienne d’Orves, 56100 Lorient+33 (0)2 97 37 56 06 +33 (0)2 97 37 56 54

www.nass-et-wind.com [email protected]

ORGANIZATION

Nass&Wind Industrie is a subsidiary of the independent French group Nass&Wind, the specialist in the development of projects and technologies in renewable energy. This subsidiary, located in Lorient (Morbihan), has a team of around fifteen high-level engineers dedicated to engineering activities and assistance to project owners for offshore wind farms. In particular, Nass&Wind Industrie leads the Winflo project for the development of a high power floating wind turbine technology in partnership with large industrial players and French academics, including DCNS and Ifremer. This project was certified by the Mer Bretagne competitiveness cluster in 2008.

ACTIVITIES

Nass&Wind Industrie is leading the Winflo project, a project the aim of which is to develop innovative technology for high-power (over 4 MW) floating offshore wind turbines effective at a depth of more than 50 m. This technology is based on a semi-submersible (free-floating) platform that optimises nacelle motion. It will include an anchor system that is suitable for all types of seabed and has a minimal impact on the environment. The nacelle will be optimised in conjunction with the float for the best possible energy production. The system will require limited installation resources, and maintenance design will be innovative and suited to distances far offshore. The initial pre-series will be manufactured and installed beginning in 2015. A number of large pilot farms will be built between 2015 and 2020, with the creation of a French wind power industrial sector which will generate many jobs into the bargain. Nass&Wind Industrie also conducts engineering studies for bottom-fixed and floating offshore wind farm locations, using its expertise to provide clients with project management support for project owners.

LOCATIONS

Brittany.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

N

NATURAL POWERStudies, expert assessment

1 rue Goethe, 67000 Strasbourg+33 (0)3 88 14 16 00 +33 (0)3 69 20 80 44www.naturalpower.com [email protected]

ORGANIZATION

Natural Power is an engineering office specialised in second opinions, wind studies, and the planning, construction and operation of wind farms. Since it opened in 1995, Natural Power has built itself a sound professional experience and an enviable reputation in the wind industry. From its British and international offices, Natural Power has earned over 20 GW of references for a wide range of customers by supplying high-quality technical solutions and an approach based on practical advice. Located in the heart of Europe, in our Strasbourg-based office (formerly Ventec), our team of engineers specialising in second opinions, wind studies and assessments and construction, works both in France and abroad. Our office in Nantes means we can be close to the French offshore sites and direct our assistance to project owner assignments.

ACTIVITIES

As renewable energy consultants, Natural Power specialises in second opinions for banks and investors, site studies and development for its clients, from the feasibility studies through project development, construction, machine inspection and operations management to dismantling. It also provides a weather forecasting service that, when combined with its technical skills, helps clients optimise wind farm maintenance and on-site work. The company’s success is ensured by the cutting-edge technology it uses, such as the CFD software VENTOS® and Melogale&trade (its system for analysing wind farms in service). The tools it uses to model complex land and forests are recognised in the industry and can significantly reduce uncertainties with regard to wind resources.

LOCATIONS

Alsace.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

N

NAVALU Aluminium ship building

Port du Bec, 85230 Bouin+33(0)2 51 49 06 49 +33(0)2 51 49 20 73

www.navalu.fr [email protected]

ORGANIZATION

For 30 years, The NAVALU company builds ships of aluminum work for the jobs by the sea. Since 2002, NAVALU dashed launched into the ships of servitude and since 2008 on the market of wind offshore, catamarans and monohulls for the transfer and the survey. NAVALU is the first French shipyard to build wind ships offshore.

ACTIVITIES

After the signature of first two contracts of catamarans of 24m for the installation and the maintenance of wind turbines at sea for England, NAVALU continues the production of the more and more sophisticated and innovative ships to ally efficiency in comfort at sea. The construction site is equipped with buildings to build going ships 35m. The port has 2 holds of launch, one for the boats at least of 12m and the other one for the superior boats in 12m of length. With a naval architect, of the qualified personnel for the assembly and the soldering of hulls, constructed NAVALU of the bâteaux of quality, following the standards of the regulations and can benefit from a certification of an international classification company. Thanks to its fame and its know-how, NAVALU pursues its progress on the international wind market and turned a considerable corner in term of innovation, reactivity, quality and control of the costs.

LOCATIONS

The NAVALU company is implanted in a port on the coast of the Atlantic Ocean, in Vendée, in 30 min of Nantes arranging all the big accesses (airport, stations, highways) necessary for its progress in France and on the international stage.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

N

NAVTISProject management, multiple specialities, shipbuilding, industrial, MRE, Oil&Gas

52 boulevard Marfille - CS 12938, 29229 Brest cedex 2+33 (0)2 98 43 15 39 +33 (0)2 98 43 20 14

www.navtis.fr [email protected]

ORGANIZATION

ISO 9001-certified. Multidisciplinary project supervision. Industrial studies, manufacture, assembly, and maintenance for industrial sectors and civil and military naval sectors.

ACTIVITIES

Expertise in project supervision and execution in the fields of mechanics, structures and fluids, fairings, electricity, instrumentation, and vibration control. NAVTIS works with leading manufacturing and shipbuilding companies in France and abroad.

LOCATIONS


PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

N

NENUPHARDesign and manufacture of vertical-axis wind turbines for floating offshore

applications

ABM Center, 128 rue du Faubourg-de-Douai, 59000 Lillewww.nenuphar-wind.com [email protected]

ORGANIZATION

Nénuphar is a limited liability company.

ACTIVITIES

Nénuphar designs vertical-axis wind turbines. It assembles its wind turbines and manufactures the blades for its machines.

LOCATIONS

Nord-Pas de Calais.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

N

NET WINDWind turbine maintenance and technical assessment

58 boulevard Pierre Lefaucheux, ZI Sud, 72025 Le Mans+33 (0)2 43 60 38 10 +33 (0)2 43 60 38 11

www.net-wind.com [email protected]

ORGANIZATION

Net-Wind SAS was founded in April 2011. It expanded soon thereafter when it purchased a well-established wind turbine maintenance company.

ACTIVITIES

Net-Wind’s technical and industrial expertise allow it to offer global maintenance services (available as annual and multi-year contracts) and a range of services defined from a wide range of skills, including:• Corrective, preventive, and predictive maintenance of wind farms (including high-voltage maintenance)• Technical operations and regular reporting• Remote surveillance and monitoring• Performance controls and improvement• End-of-warranty inspections and technical audits• Structural inspections and repair (turbine blades, bases, and masts)• Inspection and monitoring of electrical and mechanical components (gearboxes, generators, etc.)• Replacement of main parts and large-scale machining on-site• HSE management of the site (prevention plans, regulatory inspections, etc.)• Management of wind farm maintenance (waste, roadways, green spaces, etc.).

LOCATIONS

Pays de la Loire.Net-Wind is present throughout France via regional locations and partners.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

N

NEXANSManufacture of cables and wiring systems

4-10 rue Mozart, le Christophe 2, 92587 Clichy cedex+33 (0)1 56 69 84 00 +33 (0)1 55 62 78 00

www.nexans.fr [email protected]

ORGANIZATION

Nexans is a specialist in wiring systems.

ACTIVITIES

Nexans provides custom wiring solutions for wind turbines around the world. The company recently launched its WINDLINK® line, a set of complete wiring solutions specifically designed for wind turbines of all sizes. Products include energy cables, control cables, special cables, and accessories. This new line includes cables and components made of copper, aluminium, and fibre optics. Products have been fully tested under actual operating conditions and mechanical constraints to ensure systems compatibility and longevity, helping turbine manufacturers produce electricity as efficiently as possible.

LOCATIONS

Nexans’ head office is located in the Pays de la Loire region of France.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

N

NHEOLISDesigner and manufacturer of 3D wind turbines for domestic and professional

applications

Europôle Méditerranéen de l’Arbois - Avenue Louis PhilibertImmeuble Gérard Mégie, 13857 Aix-en-Provence cedex 3

+33 (0)4 42 25 98 40 +33 (0)4 42 20 51 19www.nheolis.com [email protected]

ORGANIZATION

Founded in early 2006, Nheolis is headquartered in Marseilles, with offices in Aix-en-Provence and London. Nheowind products are available in France and worldwide through a network of certified partners.

ACTIVITIES

Nheolis designs and manufactures wind turbines with a new technological dimension. The company specialises in small wind turbines for the most competitive electricity production possible. In 2009, Nheolis revolutionised the wind power industry with the design of its 3-dimensional blades, which were used as a world-first in the Nheowind 3D 100 CP. Nheolis improved on the design of the Nheowind still further with curved “Chistera” 3D blades, introduced in 2010 on the Nheowind 3D 50 and 3D 100. Nheolis wind turbines can be installed in both urban and rural areas and can be adapted to clients’ needs, helping to quickly satisfy growing global demand.Nheolis’ technology creates an original design that has achieved performance, robustness, and quietness levels never before seen in small wind turbines. In 2010, Nheolis won the EEP Gold Award for its work.

LOCATIONS

Provence-Alpes-Côte d’Azur.Marseille, Aix, and more than 30 certified partners throughout France.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

N

NICOLASManufacture of logistics vehicles, including for nacelle and mast transport

RN 6 - BP 3, 89290 Champs-sur-Yonne+33 (0)6 86 40 33 88

www.nicolas.fr [email protected] [email protected]

ORGANIZATION

SARL with 67 employees.

ACTIVITIES

Transporting wind turbine parts such as masts, nacelles and blades often requires special accessories and modular vehicles.NICOLAS has therefore developed a line of accessories fully compatible with the various families of modular vehicles, so you can transport your goods safely. Convoy manoeuvrability is improved and logistics tasks are simplified.

LOCATIONS

Burgundy.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

N

NIDAPLAST COMPOSITESManufacturer of extruded polypropylene honeycomb cores for sandwich panels

Manufacturer of finished sandwich panels with polypropylene and aluminium cores

Rue Paul Vaillant Couturier, 59224 Thiant+33 (0)3 27 44 72 00 +33 (0)3 27 44 88 05

www.nidaplast.com [email protected]

ORGANIZATION

100 employees.

ACTIVITIES

Nidaplast has an international reputation for the design of its extruded polypropylene honeycomb panels. Nidaplast offers light-weight, resistant solutions for daily applications in the fields of transport, sailing, industrial goods, capital equipment, and buildings. It also provides a range of products suitable for nacelle use in wind turbines, including honeycomb panels for lamination, infusion, or RTM, depending on the parts of the nacelle. Nidaplast also offers technical services, such as laboratory testing and development engineers to assist client projects. It also features a Nida-Kits concept with pre-cut, ready-to-use parts (not available for infusion). The Nidaplast® 8RI is both light-weight and resistant, both essential properties for wind turbines. When core thickness is important, Nidaplast® 8RI takes precedence over other materials. Both more economical and environmentally-friendly than monolithic structures, Nidaplast®8 honeycomb structural cores use less fibreglass and resin. The recyclability of polypropylene, its excellent mechanical properties, and its high-performance acoustical characteristics make Nidaplast® 8RI the ideal core for use in wind turbine nacelles. Thanks to the geometry of the alveoli, polypropylene honeycombs are perfect for vibration reduction and acoustic absorption and insulation. Honeycomb structural panels maintain all these advantages in the long term when used in wind turbine nacelles.

LOCATIONS

Nord-Pas de Calais.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

N

NOMA COMPOSITES SAS SUBSIDIARY OF BFG EUROPE-

Composites manufacturing - Producer of nacelles

« La Gare », 61400 Mauves-sur-Huisne+33 (0)2 33 85 16 16 +33 (0)2 33 83 59 55

www.bfginternational.com [email protected]

ORGANIZATION

Noma Composites is a subsidiary of BFG Europe which is a subsidiary of BFG International. BFG International is located in Bahrein and own several plants all over the world. BFG which is a recognized market leader in the design and manufacture of a wide and diversified range of composite products for all sectors. BFG International have a technical center (CAD and design of parts) and a dedicted factory to manufacture the tools.

ACTIVITIES

Noma Composites specializes in the design and production of fiber reinforced polyester (FRP) and other composite moldings to a designer’s specifications virtually without restraint with regard to finish, color and shape. BFG International and Noma Composites produce Nacelle for Wind Turbines.(http://www.bfginternational.com/bank/banking.asp)

LOCATIONS

Bahrein, Philippines, China, India, USA, Brazil, Spain, France (2 plants - Noma Composites in Normandy & ATMC in La Rochelle).

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

N

NOVEOLDesign and sale of vertical-axis wind turbines

53 rue du Vercors, 86240 Fontaine-le-Comte+33 (0)5 35 54 02 04 +33 (0)5 35 54 02 13

www.noveol.com [email protected]

ORGANIZATION

10 employees.

ACTIVITIES

Noveol is the designer and seller of the nov’éolienne, a quiet, vertical-axis wind turbine whose unique shape allows it to operate in all types of wind.Nov’éolienne is an attractively-designed vertical-axis wind turbine in which art meets technology. Its small size makes it particularly suitable for domestic use, even in urban areas. It is particularly intended for local authorities, individuals, and in isolated areas.

LOCATIONS

Poitou-Charentes.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

N

NTN-SNR ROULEMENTSDesign and manufacture of ball bearings

1 rue des Usines, 74010 Annecy+33 (0)4 50 65 30 00 +33 (0)4 50 65 33 84

www.ntn-snr.com [email protected]

ORGANIZATION

NTN-SNR ROULEMENTS is a subsidiary of NTN Corporation, the world’s third leading producer of ball bearings. NTN-SNR ROULEMENTS designs and manufactures very high-quality technical products. Innovation plays a key role in our developments: smaller, lighter, more reliable, better-performing, and more environmentally-friendly ball bearings. We are constantly innovating both with and for our clients.

ACTIVITIES

NTN-SNR’s brands are widely known and trusted. The company is very active in the automotive, industrial and aeronautics sectors: • Automotive: No.1 on the European vehicle market.• Industry: A partner to leading high-tech companies working in wind power, solar power, railway, agriculture, transmissions, etc. thanks to its dedicated teams and wide range of bearings. In the wind power sector, NTN-SNR works closely with wind farm designers and operators to develop and manufacture bearings for rotors, gearboxes, generators, and slewing rings. NTN-SNR also offers services to help clients optimise their bearing use. These services include lubrication, monitoring, training, assistance with assembly and disassembly assistance, expert assessment, tools, etc.• Aeronautics: A leader in helicopter transmissions, NTN-SNR was also a partner in the first flight of the Airbus A380. It is a supplier to major aeronautic and space programmes (including the European launcher Ariane and the CFM56 jet engines).

LOCATIONS

Rhône-Alpes.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

O

OBSTA SUBSIDIARY OF CITEL-

Obstruction lights

2 rue Troyon, 92316 Sèvres+33 (0)1 41 23 50 10 +33 (0)1 41 23 50 11

www.obsta.fr [email protected]

ORGANIZATION

OBSTA is specialized in long life obstruction lights dedicated to obstacle to air navigation like broadcasting towers, high rise buildings, stacks, transmission lines, gsm towers etc. Our products are compliant and certified by STAC in France in accordance with ICAO annex 14 chapter 6 and for some of them compliant and certified by Intertek in US in compliance with FAA regulations. OBSTA is part of CITEL group specilized in manufacturing surge protection devices.

ACTIVITIES

Since beginning of 2000, OBSTA has developed and installed mainly in France complete medium intensity dual color first xenon and now led obstruction lighting systems dedicated to windturbines. Thanks to our long experience, we propose a complete range of obstruction lighting systems with very modular design for easy and low maintenance cost.

LOCATIONS

Our commercial office is based in Sèvres close to Paris and our factory is in the city of REIMS. OBSTA also has two subsidiaries through CITEL in Bochum (Germany) and Miami (USA).

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

O

OILGEAR TOWLERDesign of complete electro-hydraulic systems for wind power and tidal projects

5 allée des Frères Montgolfier, 77183 Croissy Beaubourg - ZI Pariest+33 (0)1 64 62 72 00 +33 (0)1 64 80 79 10

www.oilgear.fr [email protected]

ORGANIZATION

750 employees on 5 continents, including 170 employees in Europe (Britain, Germany, Spain, Italy, and France). 30 employees in France, with 10 in engineering (5 hydraulic specialists and 5 electronics engineers), 3 sales engineers, and 5 after-sales service specialists (for commissioning, troubleshooting, and repair).2012 turnover in France of €6.8 million

ACTIVITIES

Builder of hydraulic/electric parts and turnkey systems.Oilgear Towler provides hydraulic power and functions, automation, and command and control systems for equipment from design to commissioning and maintenance. For more than 90 years, Oilgear Towler has working in the areas of energy (including wind and hydro-kinetic power), industry (forging, extrusion, steel), aeronautics, structural engineering, test benches, and oil applications.• Hydraulic/electric systems:Global supply of equipment, including:- Hydro-electric power stations, hydraulic manifolds with function and regulation valves, pipework, actuators- Power and command and control cabinets, human-machine interface, wiring- Supervision and development of PLC programs• Products: A line of piston pumps delivering 10 to 1,000 kW, transfer barrier pumps, standard cartridge valves, specific components and a water hydraulic range with flow metres and electronic boards.• Services: Studies, custom design and development, comprehensive project management, equipment modernisation, hydraulic/electric technical audits and assistance, maintenance contracts, remote maintenance, on-site troubleshooting, approved repair centre, training, and a stock of parts in Europe.

LOCATIONS

Île-de-France.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

O

ORATECH INNOVATION SUBSIDIARY OF EUROPE TECHNOLOGIES-

Manufacture of mechanical assemblies and wind turbine slewing rings

ZA de l’Espérance, 85600 Saint-Hilaire-de-Loulay+33 (0)2 28 15 07 23 +33 (0)2 51 08 89 08www.groupe-et.com [email protected]

ORGANIZATION

A Europe Technologies company, Oratech Innovation is a specialist in complex, large-scale machining for prototypes and small production runs. Oratech also creates moulds for composite parts.

ACTIVITIES

Oratech Innovation is skilled in building mechanical assemblies such as metal moulds and machining many large, metal parts for the aeronautics, defence, wind power, nuclear, and transport sectors. It also produces metal moulds for composite parts. In 2008, Oratech’s activities in the wind power sector represented nearly 5% of its turnover, and it is intending to increase this percentage. Oratech is an assembly expert. Its resources include fitter-assemblers, buildings equipped with large lifting and handling equipment and it is considering the assembly of wind turbine parts for the future.

LOCATIONS

Pays de la Loire.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

O

ORMAZABAL - ORMAPOST SUBSIDIARY OF VELATIA-

Ormazabal is one of the world’s leading manufacturers of medium-voltage units and

gives its clients solutions with high value-added products and services for publically

run electrical grids as well as applications for private clients

ZI, rue des Ferancins, 71210 Torcy+33 (0)3 85 80 07 40

www.ormazabal.com [email protected]

ORGANIZATION

A range of products adapted to the ERDF network has been developed: units, transformers, prefabricated substations.Ormazabal’s French Factory, Ormapost, in Torcy (Saône-et-Loire), received ERDF seal of approval in 2003 and has had ISO 9001 Certification since 2005.Ormapost manufactures transformer substations, in concrete mono-block structures, and manages every phase of the manufacturing process.With high industrial standards, Ormapost guarantees delivery deadlines and quality control over the entire production and after-sales process.

ACTIVITIES

In the renewables sector, Ormazabal offers its clients optimised solutions with a full range of prefabricated substations with modification and distribution services, according to technical specifications.These substations (Preforma, PFU, Ormabat, CFI...) are fully equipped including units, incorporated low-voltage and medium-voltage transformers.

LOCATIONS

Burgundy.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

O

OSEANBioacoustic systems to monitor and manage underwater noise impact

ZAE La Bayette, 83220 Le Pradet+33 (0)494 036 584 +33 (0)494 666 232

www.osean.fr [email protected]

ORGANIZATION

OSEAN is one of the European Leaders of the underwater acoustic measurement systems.

ACTIVITIES

OSEAN designs and manufactures underwater electronic systems in the fields of Marine Renewable Energies, Defence, Oceanographic Research.OSEAN proposes a wide range of programmable acoustic data loggers for impact studies, construction monitoring...Depending on the application, their main features are the following: • Bottom-fixed or floating sytems.• Programmable at any time (floating systems).• 4 hydrophone inputs.• Very low noise.• Great autonomy thanks to low power electronic and high performance batteries.• Large storage capacity, up to several Teraoctets.• Wide choice of communication: WiFi, GSM, Radio, Iridium satellite or ethernet cable.More info at: http://www.osean.fr/pdf/osean_versatile_data_loggers.pdfOSEAN supplies underwater lighting fixtures: high power & efficiency metal halide bulbs or DMX controlled/programmable LED modules.More info at: http://www.osean.fr/en/illumination-lights.php

LOCATIONS

OSEAN headquarters are in Southern France near Toulon.OSEAN’s coverage is national and international.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

O

OT ENGINEERING SUBSIDIARY OF MS GROUP-

Civil works, foundations, and power grids

6 A chemin des près, 38240 Meylan+33 (0)4 76 18 95 97 +33 (0)4 76 18 95 92

www.otengineering.fr [email protected]

ORGANIZATION

SAS (Simplified private limited company) with a capital of €600,000. Turnover of €9,200,000. 48 employees.

ACTIVITIES

• Civil works for foundations (wind turbines and hydroelectric plants).• Dry utilities (telecommunications and energy distribution).• Solar power: underground networks and wiring.OT Engineering provides construction activities to developers and major installers.

LOCATIONS

Head office: Rhône-Alpes, operating in France and Europe.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

P

PALFINGER FRANCE SUBSIDIARY OF PALFINGER AG (AUSTRIA)-

Manufacturer of cranes, davits, and vessels

ZA les Basseaux - BP 73, 26802 Étoile-sur-Rhône cedex+33 (0)6 27 43 33 81 +33 (0)4 75 60 77 54www.palfingermarine.com [email protected]

ORGANIZATION

SA (French limited liability company) with turnover of €70 billion. Palfinger France is part of the Vincent group. It has a staff of 45 employees at 3 assembly sites, 35 dealers and 135 after-sale service points in France.

ACTIVITIES

Palfinger BU Wind is the world’s foremost company for offshore wind turbine cranes for the handling of nacelles, masts, and electrical and logistics platforms. Provider to all offshore wind turbine manufacturers. Owned by the Palfinger family, the company’s head office is located in Austria, where its wind power activities are based. It works in conjunction with plants and subsidiaries around the world. Palfinger Neddeck Marine provides evacuation solutions for platforms (davits and boats).

LOCATIONS

Rhône-Alpes.Head office in Etoile-sur-Rhône near Montélimar and operating across France via its offices in all major cities and at least one office per French département.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

P

PARKER HANNIFIN FRANCE SASManufacturing and selling of hydraulic and pneumatic components and systems

142 rue de la forêt, 74130 Contamine-sur-Arve+33 (0)4 50 25 80 25 +33 (0)4 50 03 67 37

www.parker.com www.parkerfrance.fr [email protected]

ORGANIZATION

With annual sales of $13 billion in fiscal year 2013, Parker Hannifin is the world’s leading diversified manufacturer of motion and control technologies and systems, providing precision-engineered solutions for a wide variety of mobile, industrial and aerospace markets. The company employs approximately 58,000 people in 49 countries around the world.

ACTIVITIES

Main products: fittings, hoses, quick couplings, filters, seals, cylinders, hydraulic, pneumatic and electromechanical systems. Many value added services complete this unmatchable offer of products and systems: EDI, kitting, emergency hose repair and replacement service… Parker offers a first class service to its customers.

LOCATIONS

Rhône-Alpes.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

P

PARKER OLAERManufacturer of hydropneumatic accumulators and heat exchangers

16 rue de Seine, 92704 Colombes cedex+33 (0)1 41 19 17 00 +33 (0)1 41 19 17 20

www.olaer.fr www.parker.com [email protected]

ACTIVITIES

Parker Olaer supplies accumulators and heat exchangers for all manufacturing industries, especially wind power. Parker Olaer, with its experience in this field, helps clients at all stages of their projects by the development of dedicated determination software, simulation tools, special constructions, a wide range of Olaer accumulators (bladders, membranes, and pistons), cooling solutions (air/oil and water/oil exchangers, circulation pumps), and international support with sales companies around the world.

LOCATIONS

Île-de-France, Rhône-Alpes, and abroad.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

P

PIRIOU SUBSIDIARY OF PIRIOU GROUP-

Shipbuilding, repair and naval engineering

ZI du Moros - BP 521, 29185 Concarneau+33 (0)2 98 97 09 48 +33 (0)2 98 97 20 36

www.piriou.com [email protected]

ORGANIZATION

Piriou is a specialist in shipbuilding and ship repair for medium sized vessels with high value added, thanks to high performance engineering, combined with the worldwide locations of its industrial sites.

ACTIVITIES

Global custom solutions for a large range of vessels for artisanal or industrial fishing, offshore oil&gaz service, offshore wind service, towing, public service’s vessels and patrol duties.

LOCATIONS


PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

P

PLASTINOV SNEManufacture of composite material parts

ZAC Marmande Sud, 47250 Samazan+33 (0)5 53 64 22 22 +33 (0)5 53 64 20 76

www.plastinov-composite.fr [email protected]

ORGANIZATION

Plastinov SNE’s main area of expertise is the design and production of composite material parts (polyester or epoxy). It has a team of 25 employees.

ACTIVITIES

Plastinov is active in the wind power, nautical, and aeronautical industries. Its engineering office and research and development department allow Plastinov to cover all the manufacturing stages based on client drawings, including master casts and moulds.With over 25 years of experience in composites, Plastinov can adapt to client requests in particular thanks to its various production methods, which include 5-axis numerical control, simultaneous projection, numerical cutting, vacuum forming, infusion, and RTM.

LOCATIONS

Aquitaine.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

P

PROMARITIME INTERNATIONALFreight forwarding - Port handling - Shipping office - Lifting

19 boulevard du Midi, 76108 Rouen cedex+33 (0)2 35 73 63 10 +33 (0)2 35 73 63 93

www.promaritime.fr [email protected]

ACTIVITIES

Promaritime International has long been established in port activities in Normandy. Its experienced staff conduct operations for shipping, handling, port lifting, heavy-package transport, ship freighting, and door-to-door logistics. Promaritime’s trademark is its proximity to clients and its ability to implement customised solutions. The entire Promaritime team is bilingual and available 24/7.

LOCATIONS

Promaritime has been established in Normandy for many years (in Rouen and Dieppe), and recently opened three offices on the Mediterranean coast in Fos-sur-Mer, Sète, and Port-La-Nouvelle.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

P

PROMICDistributor of aircraft warning lights

ZI Stelytec - Allée Galilée, 42400 Saint-Chamond+33 (0)4 77 47 52 74 +33 (0)4 77 47 52 57

www.light.promic.fr [email protected]

ORGANIZATION

For over 20 years, Promic has been the preferred partner for companies using high-tech optical glass and reflectors.Due to the need to constantly improve the optical quality of its aircraft warning lights, the French company Promic has established a partnership with the Italian manufacturer Luxsolar to become its exclusive distributor in France.Founded in 2005, Luxsolar has rapidly become an expert in lighting systems for high-risk areas and now manufactures LED aircraft warning lights.

ACTIVITIES

Promic distributes LED aircraft warning lights that are certified by STAC (the civil aviation technical department) and compliant with ICAO (International Civil Aviation Organisation).Whether low-intensity or high-intensity, type A, B, C, or AB, Promic distributes products adapted to aircraft warning lights for wind turbines and wind measurement masts. It also offers GPS synchronisation and backup electrical cabinets which are essential for aviation safety around wind farms.Promic also makes aircraft warning light kits for wind measurement masts. The kits are completely autonomous thanks to a solar panel and batteries incorporated in an underground box.Through partnerships with companies that install aircraft warning lights and met masts, Promic is fully able to respond to the requirements of wind power industry professionals.

LOCATIONS

Promic is located in Rhône-Alpes. Its products are available in all French-speaking countries.Luxsolar is based in Italy.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

R

REETEC FRANCEWind farm solutions

10 avenue de la Jasse - ZAE de Viargues, 34440 Colombiers+33 (0)4 67 09 83 63 +33 (0)4 67 09 83 70

www.reetec.eu [email protected]

ORGANIZATION

REETEC is a company with its head office in Bremen. With over 200 employees in Europe, REETEC has been specialised in wind power for 18 years and its unique expertise is acknowledged by all the players in the wind power industry.

ACTIVITIES

• SAFETY: Painstaking preparation for operations, integrating safety procedures every step of the way. • AIRCRAFT WARNING LIGHTS: Design and manufacture of aircraft warning lighting which complies with all European standards for onshore and offshore wind turbines - Systems incorporating highly-specific LED technology which many demanding turbine manufacturers have selected for their machines - Installation possible on existing sites. • BLADES:Inspections with full reports, including very high definition photos to monitor changes in defects over time - Turnkey repairs, from rolling to repairs of blades on the ground (turnkey solutions).• REPLACEMENT OF LARGE COMPONTS:Partnership with the major players in the lifting sector - Highly responsive, in France and abroad - Turnkey: REETEC manages entire projects all the way to commissioning - Diversified expertise: replacement of gearboxes, generators, blades, bearings, nacelles, etc. • MAINTENANCE: Corrective or preventive, on multiple types of turbines. Eighteen years of experience in the field. • INSTALLATION: In partnership with the major players in the transport and lifting sector - Turnkey assembly: from the plant all the way to commissioning - A single point of contact throughout the project for transport, construction, and hoisting.

LOCATIONS


PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

R

REPACK-SDesign and manufacture of seals

Zone industrielle du bois Bernoux, 71290 Cuisery+33 (0)3 85 32 10 14 +33 (0)3 85 32 52 12www.repack-s.com [email protected]

ACTIVITIES

Design and manufacture of seals and sealing systems, including for rotors and hydraulic cylinders. 33 employees.Areas of expertise: PTFE, elastomers, and technical plastics.R&D for new profiles and seals. In-house test centre/test bench.

LOCATIONS

Burgundy.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

R

REVELLifting, handling, and special transport

26-28 boulevard Frédéric Sauvage, 13014 Marseille+33 (0)4 42 05 60 61 +33 (0)4 42 05 69 75www.groupe-revel.fr [email protected]

ACTIVITIES

Revel specialises in lifting, handling, work platforms, transport logistics and telecommunications. It also carries out wind turbine lifting operations.

LOCATIONS

Provence-Alpes-Côte d’Azur.Revel has 13 locations with 180 employees.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

R

ROLLIX - DEFONTAINE DEPARTMENT OF DEFONTAINE SA-

Manufacture of slewing rings, including blade and yaw bearings for wind turbines

Rue Saint-Eloi, 85530 La Bruffière+33 (0)2 51 45 94 94 +33 (0)2 51 45 92 98

www.rollix.com [email protected]

ORGANIZATION

Defontaine SA has 825 employees at its La Bruffière site.

ACTIVITIES

Design and manufacture of slewing rings for wind turbine blades and nacelles. The Rollix range of rings covers all wind turbine applications, from small turbines to the latest multi-megawatt offshore turbines. Rollix rings can be found in 40,000 wind turbines around the world, representing rated power of 67 GW (including 2.1 GW off shore).

LOCATIONS

Pays de la Loire.Rollix’s main plant is located in La Bruffière, south of Nantes.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

R

ROXTEC FRANCE SASModular sealing systems

37 rue La Fayette - Bâtiment B, 75009 Paris+33 (0)1 82 73 02 00 +33 (0)1 40 82 99 98

www.roxtec.com [email protected]

ORGANIZATION

Dedicated to safety since 1990.Roxtec was founded due to the invention of a unique technology called Multidiameter™, which allows products to be easily adapted to all diameters of cables and pipes using modules with peelable layers. Now a world leader on its market, Roxtec is present worldwide through a dense network of subsidiaries that provide clients with the best possible service and technical solutions adapted to their needs.

ACTIVITIES

Roxtec has been working in the wind power sector around the world for more than 10 years and has developed extensive expertise in cable bushings and modular pipework. Its solutions are regularly used in all fields related to energy production and distribution.Its products provide varied and cumulative protection, such as fire resistance up to two hours, sealing against water (up to 4 bars) and gas (2.5 bars), electromagnetic compatibility (EMC), and rodent protection.Roxtec’s solutions are multi-purpose and highly versatile. They can be used in existing bushings or to provide spare capacity in order to add or change cables in the future. In short, Roxtec helps you save money throughout the lifespan of your installations.

LOCATIONS

Île-de-France.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

S

S.O.M. (Services Organisation Méthodes) SUBSIDIARY OF ORTEC GROUP-

Industrial engineering

Route du canal Bossière, 76700 Gonfreville-l’Orcher+33 (0)2 35 25 62 50 +33 (0)2 35 25 62 59

www.som-industrie.com [email protected]

ORGANIZATION

SOM is a French engireering company created in 1980. The company has 1,000 employees and a 85 million euro turnover.

ACTIVITIES

SOM operates across all industrial sectors. Our pragmatic approach to project management brings our clients technological expertise and cost efficiency. SOM can provide the following services :• Project Management• QHSE Project Engineering• Engineering and Regulatory Monitoring• Maintenance Engineering• Certified Professional Training

LOCATIONS

Aix-en-Provence (Head office), Le Havre, Paris, Lyon, Martigues.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

S

SAFORGeotechnical surveys and foundations

Z.I de Jarry - BP 2118, 97193 Jarry cedex+33 (0)5 90 26 76 43 +33 (0)5 90 26 94 32

www.safor.fr [email protected] [email protected] [email protected]

ORGANIZATION

Founded in 1980, SAFOR is one of the leaders in the French Guiana region in geotechnics, special foundations, nails, the environment, and maritime construction.

ACTIVITIES

Geotechnics is one of SAFOR’s main activities. It works in partnership with local and national soil engineering offices. SAFOR conducts most types of soil testing, including pressuremeter tests, core drilling, SPT tests, drilling parameter recording, water tests, piezometers, installation of pore pressure metres and settlement gauges, crosshole test drilling, installation of inclinometric pipes, and pumping tests.

LOCATIONS

Antilles and Guiana.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

S

SAFTDesign and production of high-tech batteries for industry

12 rue Sadi Carnot, 93170 Bagnolet+33 (0)1 49 93 18 56 +33 (0)1 49 93 19 55

www.saftbatteries.com

ACTIVITIES

Saft (Euronext: SAFT) is a world leader in the design and manufacture of advanced technology batteries for industry. The Group is the world’s leading manufacturer of nickel batteries and primary lithium batteries for the industrial infrastructure and processes, transportation, civil and military electronics’ markets. Saft is the world leader in space and defence batteries with its Li-ion technologies which are also being deployed in the energy storage, transportation and telecommunication markets. Saft’s 3,800 employees present in 18 countries, its 15 manufacturing sites and extensive sales network all contribute to accelerating the Group’s growth for the future.

LOCATIONS

Île-de-France.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

S

SAIPEMEngineering, construction, installation, and maintenance

1/7 avenue San Fernando, 78884 Saint-Quentin-en-Yvelines+33 (0)1 61 37 85 25 +33 (0)1 61 37 62 88www.saipem-sa.com [email protected]

ORGANIZATION

Founded over 50 years ago, the Italian group, Saipem is a world leader in services to onshore and offshore oil and gas industries. Saipem has three units: offshore, onshore, and drilling. Saipem operates in over 35 countries and has one of the world’s largest fleets of machines for installing offshore structures and pipelines, and onshore and offshore drilling. The company currently has 36,500 employees of 120 different nationalities. In 2009, it made €10.3 billion in turnover.

ACTIVITIES

Saipem SA is the French subsidiary of the Saipem group. Saipem SA specialises in onshore activities, some offshore activities, marine construction, engineering, and research and development. With the group’s offshore experience in marine construction and oil rigs, Saipem SA has developed installation systems for offshore wind turbines both with tubular foundations (monopile and multipod), and gravity base foundations, as well as for the installation of the wind turbines themselves. The company has conducted numerous feasibility, design, and technical and financial pre-project studies for French and foreign operators, and is capable of executing complete EPC projects.

LOCATIONS

Île-de-France.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

S

SARENS FRANCE SUBSIDIARY OF SARENS GROUP-

Special transport and lifting

54 avenue de la Gironde, 59640 Dunkerque+33 (0)3 28 64 01 10 +33 (0)3 28 64 01 11

www.sarens.com [email protected]

ACTIVITIES

General activities:• Lifting• Engineering, handling technology• Hiring of cranes with 30 to 2,000 tonnes of capacity (lattice and telescopic booms)• Road, river, and maritime transport.Wind power-related activities (company dedicated to this sector: Sarens Wind):The company offers three types of services in this field:• Lifting • Combined lifting and assembly of wind turbines• Combined lifting, assembly, and transport of wind turbines.

LOCATIONS

Centre, Haute-Normandie, Basse-Normandie, and Provence-Alpes-Côte d’Azur.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

S

SBS FORGE SUBSIDIARY OF GENOYER GROUP-

Manufacture of flanges and forged blanks for slewing rings

La Gare - BP 6, 42130 Boën+33 (0)4 77 96 80 00 +33 (0)4 77 96 80 50

www.sbs-forge.com [email protected]

ORGANIZATION

SBS is part of the Genoyer group, a leading industrial and commercial operator for major international petroleum, gas, and water projects.

ACTIVITIES

SBS manufactures forged and machined parts for various industries, such as oil and gas, nuclear, mechanical engineering, and wind power. In 2008, it achieved €43 billion in turnover, 35% of which came from export. For the wind power industry, SBS makes parts for masts, slewing ring blanks, and various forged blanks for the production of reduction gears.

LOCATIONS

Rhône-Alpes.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

S

SCAIME SAS SUBSIDIARY OF FOOK TIN TECHNOLOGIES GROUP-

Measurement specialist

Technosite Altéa - BP 501, 74105 Annemasse cedex+33 (0)4 50 87 78 64 +33 (0)4 50 87 78 42

www.scaime.com [email protected]

ORGANIZATION

Scaime is a company specialising in the design and production of industrial weighing and measurement solutions. The company is renowned for its technological expertise and the quality of its products. Scaime is a world leader in its field. Its production methods are flexible enough to manufacture items individually or in mass production. It is ISO 9001-certified, guaranteeing that products comply with international norms and standards. Its growth strategy involves investing heavily in research and development in order to constantly offer new innovative solutions.

ACTIVITIES

In line with its desire to bring its clients new solutions, Scaime has developed fibre-optic measurement systems. As development on the wind turbine market is considered to be strategic, Scaime has developed a range of solutions specially designed for this market. Scaime offers stress sensors, temperature sensors, inclinometers, and other functions to give clients added value, as well as data acquisition units developed and produced in-house by Scaime using its electronics expertise. The MDX400T-X is a multi-channel unit with a measurement frequency of 100 Hz. It comes in a stainless steel box with an IP66 protection rating, and is equipped with sealed connectors. The MDX400T-X comes with an intuitive, user-friendly web interface that lets you configure the entire system and transfer data using the TCP-IP protocol. Communication is also possible using the CANopen protocol. Scaime’s solution can be conveniently installed in various parts of a wind turbine, including the blades, mast, or foundations. It has many uses, from continuous monitoring of blade loads, to managing alerts, detecting ice, and estimating remaining lifespan.

LOCATIONS

Rhône-Alpes.Scaime is present in 65 countries through a network of subsidiaries and distributors.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

S

SCHAEFFLER FRANCE SAS SUBSIDIARY OF SCHAEFFLER TECHNOLOGIES AG & CO. KG-

Mechanical drives

93 route de Bitche - BP 30186, 67500 Haguenau+33 (0)3 88 63 40 40 +33 (0)3 88 63 40 41

www.schaeffler.fr [email protected]

ORGANIZATION

Schaeffler develops and manufactures precision products for everything that moves – in machines, equipment, and vehicles as well as in aviation and aerospace applications – with its INA, LuK, and FAG brands.

ACTIVITIES

For over 30 years, INA and FAG have designed and produced bearing arrangements for wind turbines. Within Schaeffler Group Industrial, the specialists from the business unit “Wind power” work closely with designers, manufacturers and operators of wind turbines. As early as the concept phase, detailed attention is paid to customer requirements. Bearing selection and documentation are backed up by sophisticated calculation methods. Products developed to a mature technical level are optimally matched to the particular task. The range is intelligently rounded off by Condition Monitoring systems, lubricants, mounting and maintenance tools. In this way, Schaeffler Group Industrial helps to achieve low operating costs for wind turbines.

LOCATIONS

Alsace, France.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

X

Our actions today will shape our world of tomorrow

An extensive range of products and services are made available by Schaeffler to original equipment manufacturers and operators of wind energy plants.

Low-friction INA and FAG rolling bearings are used worldwide in the drive train of modern wind energy turbines (from 220 KW to the latest multi-megawatt class).

The split spherical roller bearings FAG ensure for example the proper performance of the wind turbines and reduce the friction of the deep groove ball bearings Generation C implanted in electric motors by 35 %.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

S

SCHNEIDER ELECTRIC FRANCEEnergy managementgy g

35 rue Joseph Monier, 92506 Rueil-Malmaison cedex +33 (0)4 7660 5885www.schneider-electric.com [email protected]

ORGANIZATION

A world specialist in energy management present in over 100 countries, Schneider Electric offers integrated solutions for many market sectors. The group is a leader in energy, infrastructures, industrial processes, building automation, data centres and networks and has a large presence in residential applications. Focused on making energy safe, reliable, and efficient, the company’s 114,000 employees achieved a turnover of more than €18.3 billion in 2008, through an active commitment to help individuals and organisations make the most of their energy.

ACTIVITIES

Schneider Electric offers wind power solutions that provide greater energy efficiency and reduced maintenance. These solutions are divided into two approaches, one for wind turbine manufacturers and one for wind farm developers and operators. Wind turbine manufacturers will find solutions for the main electrical system of turbines (from generators–which are not included–to grid connections), for wind turbine monitoring, and for all auxiliary electric systems (nacelle orientation, blade orientation, lighting, heating, climate control, and goods lifts). Developers and operators will find solutions for connecting wind turbines to each other (MV electrical grid), connecting the entire wind farm to the electrical grid, and supervising wind farms remotely.

LOCATIONS

Through Schneider Electric France’s sales offices (www.schneider-electric.fr), Schneider Electric SA is present in France in Aix-en-Provence, Ganaches (Pringy), Belfort, Bordeaux (Pessac), Brest, Caen (Bourguebus), Calais (Coquelles), Clermont-Ferrand (Aubière), Compiègne, Dijon (Longvic), Fontenay, Grenoble, Lille (Seclin), Limoges, Lyon (Saint-Priest), Metz, Montpellier, Nantes, Nice - Côte d’Azur, Orléans, Paris - Massy, Paris - Saint-Denis, Pau (Lescar), Reims, Rennes (Cesson-Sevigné), Rouen (Mont St-Aignan), Strasbourg (Illkirch-Grafenstaden), Toulouse, and Tours. Its subsidiaries manufacture: conversion substations (PV Box) and prefabricated delivery substations for photovoltaic power plants at the St-Alban Leysse (Savoie) site, monitoring and supervision systems (Kerwin/iRIO) at the Beymost (Rhône) site, residential photovoltaic boxes (SunEzy line) at the Sarre-Union (Bas-Rhin) site, LV and MV switchgear, electrical cabinets and transformers for photovoltaic power plants, at the Alès (Haute-Garonne), Chalons (Saône-et-Loire), Montmélian (Savoie), Libourne (Gironde), and Maizières-les-Metz (Moselle) sites.The Project Engineering Centre (PEC) is based in Grenoble (Isère) and is a world skills centre, providing turnkey electrical solutions for photovoltaic power systems to investors and integrators.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

S

SCOTT BADER SA SUBSIDIARY OF SCOTT BADER LTD-

Production of resins, gelcoats, and structural adhesives for the manufacture of wind

turbine blades

65 rue Sully - BP 51601, 80016 Amiens cedex 1+33 (0)3 22 66 27 66 +33 (0)3 22 66 27 80

www.scottbader.fr [email protected]

ORGANIZATION

Scott Bader is a subsidiary of the Scott Bader Group. It has 600 employees, 10% of which work in research and development and is present on every continent. Scott Bader is a European leader in synthetic resins and stands out thanks to its unique financial structure that has no outside shareholders.

ACTIVITIES

The company is specialised in the development and production of structural adhesives and resins, as well as gelcoats for the production of wind turbine nose cones, nacelles, and blades. Scott Bader is a leader in several industries, including sailing, relining, polymer concrete, and transport.

LOCATIONS

Picardy.Production sites: England, France, Croatia, South Africa, and Dubai.Distribution companies: USA, China, Scandinavia, Spain, Germany, and Czech Republic.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

X

© A

REVA

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

S

SDMOManufacture and sale of gensets

12 bis rue de la Villeneuve - ZI de Kergonan, 29200 Brest+33 (0)2 98 41 41 41

www.sdmo.com [email protected]

ORGANIZATION

SDMO is acknowledged as a world leader in gensets, welding units, and motor pumps.

ACTIVITIES

SDMO has 31,000 m2 of production facilities, not including its logistics operations. It designs, manufactures, and installs standard gensets from 1 to 3,300 kVA. It also provides engineering expertise for the construction of custom-built power plants. No matter the size or purpose of your genset, SDMO’s ISO 9001-certified quality processes ensure that each product it designs meets your performance expectations and schedule.

LOCATIONS

Brittany.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

S

SDI (Société de Dragage International) SUBSIDIARY OF DEME GROUP-

Construction of offshore wind farms

Parc du Pont Royal - 251 avenue du Bois, Batiment i, 59130 Lambersart+33 (0)3 20 10 87 30 +33 (0)3 20 34 77 08

www.sdi-deme.fr

ORGANIZATION

With 150 years of experience in maritime construction and 10 years in offshore wind farms, Société de Dragage International (SDI) offers its expertise for the construction of offshore wind farms.Its knowledge and the assistance of its parent company, DEME, make SDI an obvious partner for offshore wind farms and projects. Its skills cover pre-feasibility studies to assistance in wind farm operation.SDI has a modern, versatile, innovative, scalable fleet of 90 ships and 200 auxiliary units.

ACTIVITIES

All types of offshore wind farm construction, including:• Preliminary studies (hydrographic studies, seabed studies, mast installation, foundation sizing, and technology decisions)• Foundations (dredging, bed, erosion protection, drilling and driving, transport, installation)• Wind turbines (lifting, transport, assembly, installation)• Connections (trench, directional drilling, installation)• Maritime assistance in maintenance and operation of offshore wind farms.SDI worked at the following offshore wind farms: Outer Thames Estuary off the North Kent Coast (UK), 2013-2015; Borkum Riffgrund 01 (DE), 2013-2014; (Northwind) Lodewijkbank (BE), 2013-2014; Belwind II OWF (BE), 2013; Le Tréport (FR), 2013; (Dong) Westermost Rough (UK), 2013-2014; Borkum West II (DE), 2011-2012; Thortonbank II + III (BE), 2011-2013; Humber Gateway (UK), 2011-2012; Baltic II (DE), 2010-2013; Walney I & II (UK), 2010-2011; Ormonde (UK), 2010; Alpha Ventus (DE), 2009; Thortonbank I (BE), 2007-2011; 2000-2007: Utgrunden (SU); Horns Rev, Samso I, Rodsand (DK); Béatrice (UK).

LOCATIONS

Nord-Pas de Calais.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

X

Member of the DEME group

Innovative marine and offshore solutions adapted to a continuously changing environmentFrom the beginning, the “Société de Dragage International” (S.D.I.), French branch of the DEME group, has been a real pioneer on major marine and waterways projects in France.

S.D.I. and the DEME group, propose a total solution for offshore wind farm construction, and provide a full range of specialized services: from geotechnical, geophysical and dimensional studies, over foundation works, transport, lifting and installation of the wind turbines, to the electrical connection and marine assistance during the operational phase.

With an experience of over 10 years in the offshore wind sector and over 150 years in it’s core business, the DEME team is ready to create the offshore wind farms of the future!

DEME: creating land for the future

Société de Dragage International “S.D.I.” saParc du Pont Royal, 251 avenue du Bois, Bâtiment I F-59130 Lambersart, France T +33 (0)3 20 10 87 30 F +33 (0)3 20 34 77 [email protected]

Self-elevating platform “Neptune”.C-Power project, Belgium.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

S

SEL ENERBETONElectrical engineering

Allée du traité de Rome - BP 74, 59279 Bailleul+33 (0)3 28 50 00 15 +33 (0)3 28 50 00 16

www.sel-solutions.fr [email protected]

ACTIVITIES

SEL is a specialist in electrical engineering for wind and photovoltaic power plant infrastructure. Services include:• Designing of all types of delivery and distribution substations• Cable-laying• HV and LV connections• Fibre optics• HV substations.These expertises complement each other and allow the SEL group to study, design, and implement comprehensive, scalable solutions to optimise energy production and distribution. As part of its evolution, the company has invested in the wind power industry, a field in which it has developed real expertise. SEL expanded into the fast-growing sector in 2002 and quickly made a name for itself. As it expanded into different markets, SEL developed and designed its own delivery substations to connect wind turbines to the EDF power grid. Today, SEL earns 70% of its turnover from the wind power sector.

LOCATIONS

SEL is a small business and has been located at the Bailleul site in Nord (Nord) since it was founded in 2000.Based between Lille, Dunkerque, and Saint Omer, SEL is ideally located for its market.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

S

SEMA (Société d’Entreprise Metallurgique d’Armor)Manufacture of wind turbine masts

2 rue Monge, 22000 Saint-Brieuc+33 (0)2 96 33 42 77 +33 (0)2 96 61 38 61

www.sous-traiter.com/sema22 [email protected]

ACTIVITIES

SEMA is a boilermaking company with around 20 employees. It specialises in large-scale structures, including tubular masts for wind turbines.

LOCATIONS

Brittany.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

S

SEMANTIC TSEngineering consulting compagny specialized in acoustic oceanography R&D.

1142 chemin Saint-Roch - Quartier La Baou, 83110 Sanary-sur-Mer+33 (0)4 94 88 24 58 +33 (0)9 55 78 63 12

www.semantic-ts.fr [email protected]

ORGANIZATION

SEMANTIC TS is an engineering consulting company devoted to acoustic oceanography, hydrograpgy and geophysics.

ACTIVITIES

Environmental measurements : hydrography, geophysics and undrwater acoustics. Bottom classification. Environmental monitoring. Specific softwares. Measurement campaign at sea. Specific instrumentation. Survey vessel. Underwater acoustic propagation and communication. Noise.

LOCATIONS

SEMANTIC TS is established in Provence-Alpes-Côte d’Azur (France), but does not limit its displacements while working and surveying everywhere in the world.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

S

SERHYEngineering office, consulting, operation and maintenance

1 bis avenue de la Méditerranée, 81240 Saint-Amans-Soult+33 (0)5 63 98 06 15 +33 (0)4 92 61 51 17www.serhy.com [email protected]

ORGANIZATION

SERHY SAS • Capital of €1,540,000 • Castres Trade and Companies Register B379 746 001 • SIRET 379 746 001 00070 • APE Code 7112B • Intracommunity No. FR 78 379 746 001.

ACTIVITIES

• Hydroelectricity: development, studies, execution, project management, operation, property maintenance, buying and selling of sites, commercialisation of energy purchase contracts, and guarantee of origin. • Wind power: development, studies, project management, engineering and substantial optimisation of electrical connections, operation. • Photovoltaic: development, studies, project management, engineering and optimisation of electrical connections, operation.

LOCATIONS

Midi-Pyrénées, Provence-Alpes-Côte d’Azur, Rhône-Alpes.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

S

SETEC ENERGY SOLUTIONSEngineering and consulting

Immeuble le Crystallin - CS 20087 - 191/193 cours Lafayette, 69458 Lyon cedex [email protected]

ORGANIZATION

Setec Energy Solutions specialises in energy production and management in France and abroad. Setec Energy Solutions handles all missions ranging from studies, assistance to project owners, project management, expert assessment and assistance for private and public clients. We operate in the following fields: energy efficiency, hydroelectricity, onshore and offshore wind farms, biomass and fossil thermal energy, geothermics, and solar.

ACTIVITIES

• Consulting: Setec Energy Solutions helps its partners and clients define their projects and develop their strategies through feasibility studies, project management, due diligence, expert assessment and diagnostics, studies of resource potential, and general upstream studies (master plan, carbon footprint, strategic advice and studies of energy resources).• Engineering: Setec Energy Solutions uses its operational trades including civil engineering, hydraulics, equipment and energy production processes. It performs all the technical studies for the project phase right through to construction site management.

LOCATIONS

Rhône-Alpes.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

S

SGS QUALITEST INDUSTRIEInspections, verifications, analyses and certificationp y

Domaine de Corbeville Ouest, 92100 Orsay+33 (0)1 69 33 69 14 +33 (0)1 64 46 02 04www.fr.sgs.com [email protected]

ORGANIZATION

Founded in 1878 in Rouen, SGS is the world leader in inspections, verifications, analyses, and certification. Acknowledged as a reference for quality and integrity, SGS has over 78,000 employees and a network of over 1,500 offices and laboratories around the world.

ACTIVITIES

SGS works on all stages of industrial projects, from design to construction and operation. SGS offers a wide range of services wind farm projects covering their entire life-cycle to ensure that machines are reliable and efficient. Services include: • Studies: design verification, site evaluation, project certification• Technical consulting: due diligence, project risk management, support for calls for tenders, project owner representation, assistance for authorisation procedures• HSE: regulatory audits and consulting, outsourcing• Supplier monitoring: technical audits and evaluations of suppliers, factory inspections, acceptance testing, follow-up and reminders• Verifications: non-destructive testing, quality control/assurance, blade inspections• Supervision of construction and loading/unloading operations• At acceptance: functional and safety tests, commissioning supervision, final inspection• During operation: periodic and end-of-warranty inspections, vibration studies, oil analyses, endoscopies, blade inspections, damage analyses.

LOCATIONS

Île-de-France.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

S

SGURRENERGYTechnical consulting

34 rue de Cléry, 75002 Paris+33 (0)1 44 88 57 10

www.sgurrenergy.com [email protected]

ORGANIZATION

With a track record of over 110 GW and its innovative technologies, SgurrEnergy is recognised as one of the world’s largest specialists in independent technical consulting in the field of renewable energy (onshore wind energy, offshore wind energy, photovoltaic power and marine energy).Founded in 2002 in Scotland • 180 consultants and engineers • 10 international offices, including an office in Paris, France, since January 2009.

ACTIVITIES

SgurrEnergy’s impartial technical expertise is called upon during the entire life-cycle of a renewable energy project by project owners, investors (due diligence), operators and manufacturers. Objectives: To significantly reduce risk and significantly increase project value. SgurrEnergy has developed Galion, second-generation LIDAR remote detection technology. Objectives: Improve understanding of wind resources and optimise wind farm performance. Project design/development • Resource measurement/analysis (using met masts, LIDAR, SODAR) • Calculation of production potential • Selection of sites • Feasibility studies • Sizing and optimisation • CFD • Technology audits • Electrical and civil engineering, control systems • Pre-contract phases • Completely impartial technical and financial due diligence (financing or project transfers/acquisitions) • Consulting for operation and maintenance. Products: Galion; Orqa (offshore measurement and data analysis platform); SgurrSCADA (SCADA data analysis software).

LOCATIONS

Île-de-France.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

S

SIKA INDUSTRYAssembly and sealing solutions for renewable energy

84 rue Edouard Vaillant, 93351 Le Bourget+33 (0)1 49 92 80 33 +33 (0)1 49 92 80 97

www.sika.fr [email protected]

ORGANIZATION

Sika is an independent Swiss group founded in 1910. It has a worldwide presence with over 15,000 employees in 74 countries. Sika France SA has over 650 employees and an annual turnover of more than €280 million in the construction and industry trades.

ACTIVITIES

Sika Industry develops solutions for bonding, sealing, soundproofing, and reinforcement for industry (automotive, marine, transport, and construction components). Its products are particularly used in windows, façades, structural glass bonding, photovoltaic and thermal panels, and solar concentrators. With more than 30 years of experience in developing façade solutions (bonded exterior glass), and over 15 years in renewable energy, Sika has a complete line of adhesives for assembling photovoltaic and thermal panels and solar concentrators, as well as for building wind turbines from the foundations (concrete additives, anti-corrosion systems) to the blades. Its adhesives for the solar power industry have been optimised to combine performance, ease of use, and setting time to enable large-scale, automated application. With worldwide assistance available for all your projects, Sika is the ideal partner for manufacturers of solar power systems.

LOCATIONS

Île-de-France.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

X

© A

LSTO

M

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

S

SIMRIT SUBSIDIARY OF FREUDENBERG GROUP-

Sale of sealing components and systems and anti-vibration parts

170 rue Branly, 71020 Mâcon cedex 9+33 (0)3 85 29 30 00 +33 (0)3 85 29 30 87

www.simrit.com [email protected]

ORGANIZATION

Freudenberg Simrit SAS has 70 employees. It is a subsidiary of the Freudenberg group, which has 35,000 employees worldwide. Its head office in France is located in Mâcon, and the sales department in Emerainville (77). In 2009, Freudenberg Simrit SAS had a turnover of €40 million.

ACTIVITIES

Thanks to its cutting-edge technology, Simrit already operates in numerous segments of the wind power industry, with renowned products and solutions adapted to the requirements of the sector. The large number of products known worldwide such as sealing rings (Simmerring), hydraulic components (Merkel), hydraulic accumulators (Integral Accumulator), O-rings, and liquid silicone products is proof of Simrit’s positioning on the market. With specific solutions and anti-vibration systems, Simrit has the largest selection of products in this field.

LOCATIONS

Burgundy, Île-de-France.Sales division: Freudenberg Simrit SAS49 bis Avenue de l’Europe - La Malnoue/Emerainville77436 Marne La Vallée cedexTel +33 (0)1 60 95 89 00 - Fax +33 (0)1 60 95 89 29

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

S

SKF IN FRANCEBearings manufacturer

ZA de l’Observatoire - 34 avenue des Trois Peuples - 78180 Montigny-le-Bretonneux+33 (0)1 30 12 73 00 +33 (0)1 30 12 76 50www.skf.com [email protected]

ORGANIZATION

The SKF group is the world’s leading supplier of bearings, lubrication systems, mechatronics, seals and services.

ACTIVITIES

SKF designs bearings, seals and couplings, as well as lubrication and vibration monitoring systems that work in tandem with its Remote Diagnostic Centres. The company develops bespoke solutions such as gearbox kits and made-to-order seals to help wind-turbine operators increase production and cut costs. SKF also supplies equipment such as Hydrocam bolt tensioners, endoscopes and alignment systems.SKF engineers and teams regularly work alongside OEMs and wind farm operators to help them improve equipment efficiency and increase energy savings, whilst at the same time reducing their impact on the environment.

LOCATIONS

9 sites in France including:• Avallon (89) - slewing bearings• Saint-Cyr sur Loire (37) - generator bearings• Montigny-le-Bretonneux (78) - Hydrocam tensioners and Remote Diagnostic Centre.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

X

��

��

��

�� !� ��" �� #�� $�� %� �� "� � �� $�� &� �� '��" �� " � �� " �� !� ��" �� &�� (��$� �� $�� "� �� )�� *�� $�� $�� &�� &� �� $��

&�� +�� "� ,�"��"

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

S

SNEFElectrical engineering

87 avenue de Aygalades, 13015 Marseille+33 (0)4 91 61 58 00 +33 (0)4 91 61 58 13

www.snef.fr [email protected]

ACTIVITIES

The SNEF group is a specialist in electrical engineering, industrial processes, communication and safety systems, climate engineering, and maintenance.

LOCATIONS

Provence-Alpes-Côte d’Azur.SNEF has 62 offices and 29 subsidiaries in France and 13 subsidiaries abroad.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

S

SOBEC SARL SUBSIDIARY OF SNEF GROUP-

Shipbuilding and repair

170 rue de l’Elorn, 29200 Brest+33 (0)2 98 44 72 69 +33 (0)2 98 46 79 75

www.snef.fr [email protected]

ORGANIZATION

SOBEC, a subsidiary of the SNEF group, has a permanent staff of 55 high-qualified employees specialising in naval trades and in industry. Shipbuilding and repair of all types of vessels.

ACTIVITIES

• Construction and fairings for port infrastructures, including floating docks, pontoons, walkways, and sea gates.• Construction and fairings for all types of service vessels including pilot boats, and naval training vessels.

LOCATIONS


PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

S

SOCAH DIVISION HYDRAULIQUEImport of parts and manufacture of hydraulic cylinders

ZI du Plessis Beucher - BP 52116, 35221 Châteaubourg cedex+33 (0)2 99 00 84 00 +33 (0)2 99 00 84 09www.socah.fr [email protected]

ORGANIZATION

Socah Division Hydraulique was founded in 1993 and today has 54 employees. Its head office is located in Châteaubourg, near Rennes in France. It also has two other sites: a sales office in Ancenis (Loire-Atlantique) and a production plant in Vinay (Isère) manufacturing Luce Hydro cylinders. In 2008, the company’s turnover was up by 25% at €12 million.

ACTIVITIES

Socah Hydraulique’s main areas of speciality are agriculture, vehicle bodywork, and manufacturing. Its three primary trades are: importing parts, designing and building hydro-electric power stations, and manufacturing hydraulic cylinders under the brand name Luce Hydro.It has one of the largest stocks in the industry (over €3 million worth) to ensure excellent responsiveness.In January 2008, Socah Hydraulique bought back CHS (Composant Hydraulique Service), allowing the company to offer a complete line of components.

LOCATIONS

Châteaubourg in Brittany, Ancenis in Pays de la Loire, and Vinay in Rhône-Alpes.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

S

SOGEBRASPort operations and services for goods and ships

Rue Des Morées, 44550 Montoir-de-Bretagne+33 (0)2 40 90 41 42 +33 (0)2 40 90 25 37www.sogebras.com [email protected]

ORGANIZATION

Sogebras is a subsidiary of the Sogena and Maritime Kuhn groups. Together, the two groups a network of 16 agencies in all the major French ports and employ 600 people. Sogebras’s main activities are port operations and services for goods and ships. It also specialises in the transport and handling of heavy, bulky items.

ACTIVITIES

Liner agency, ship agency, stevedoring, storage, forwarding, and customs.

LOCATIONS

Pays de la Loire, France (Maritime Kuhn and Sogena).

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

S

SOLIMAN LEVAGELifting, handling and industrial transfers

ZAC du Moulin Lamblin, 248 rue du Général de Gaulle,59320 Hallennes-lez-Haubourdin

+33 (0)3 20 50 71 00 +33 (0)3 20 50 83 [email protected]

ORGANIZATION

Soliman has 50 technicians who are CACES-certified (safe driving aptitude certificate). They receive continual training and are educated in safety awareness.Soliman operates in a number of sectors, including industry, the construction trade, and civil works.

ACTIVITIES

Three sectors of activity: lifting, assembly/handling/industrial transfers, and leasing of equipment.The company owns 40 of the latest telescopic cranes, 35 to 400 tonnes.It recently created a new department for lattice boom crawler cranes.

LOCATIONS

Nord-Pas de Calais.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

S

SOURIAU SUBSIDIARY OF ESTERLINE-

Harsh environment connector

RD 323, 72470 Champagné+33 (0)2 43 54 35 14

www.souriau.com [email protected]

ORGANIZATION

SAS

ACTIVITIES

• Engineering & manufacturer of specific connectors for harsh environement including marine & offshore application• Machining, plating, plastic injection & assembly• Certified laboratory for electrical and environmental test• Harnessing & overmoulding• Full knowledge on optical technologies, Ethernet, low and high elctrical signal

LOCATIONS

Plant close to “Le Mans” : 900 people.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

X

© A

REVA

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

S

SPIE ENERGIES NOUVELLESNew energy

70 chemin de Payssat - BP 4056, 31029 Toulouse cedex 04+33 (0)5 61 36 77 77 +33 (0)5 61 36 75 56www.spie.com [email protected]

ORGANIZATION

A service professional in industry, energy, and communication networks, SPIE works closely with public and private clients from the industrial and tertiary sectors to design and produce their equipment and assist with operation and maintenance. SPIE draws on its European network of local companies and its specialised services to develop and implement quality solutions tailored to its clients’ current and future needs.

ACTIVITIES

Originally a project manager and installer for the construction of hydro-electric power stations, it was only natural that in 1996 SPIE should begin working in renewable energy (wind, photovoltaic, biomass, and ORC). SPIE has the expertise necessary to help investors develop their projects. For turnkey contracts, SPIE covers everything from earthwork to commissioning.

LOCATIONS

Midi-Pyrénées.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

S

STE GLOBALSupplier and installer of met masts

10 Parc club du Millénaire - 1025 rue Henri Becquerel, 34000 Montpellier+33 (0)4 67 20 40 50

www.ste-global.com [email protected] [email protected]

ORGANIZATION

STE GLOBAL has its head office in Villanueva de Gallego in the province of Zaragoza in Spain, at the foot of the Pyrénées mountain range, two hours from the French city of Pau. Since 2003, STE GLOBAL has had a satellite office in Montpellier which has always been the company’s showcase and contact point for its French clients. In 2013, the company opened a sales branch in Dakar, Senegal, for its new area of activity: providing and installing telecommunications aerials. The goods for meteorological masts and the teams of technicians dedicated to them are physically located in Villanueva de Gallego. Operations are controlled and directed from its head office. Its warehouse is used for the new equipment for the installations and for temporary storage for some of its clients whilst seeking a new site for reassembly.

ACTIVITIES

STE GLOBAL specialises in wind measurement. Its main area of activity is the supply and installation of meteorological masts and measuring equipment. It provides a wide range of services, including preventive and corrective maintenance, solutions to communication problems and electrical supply problems for heated equipment, programming of aircraft warning lights in the data logger, replacing sensors that are broken or need recalibration, supplying and installing met masts that are equipped and installed in accordance with IEC norms, dismantling and storage of met masts, technical assistance, communications testing, and data downloading. Its second area is telecommunications. STE GLOBAL opened a sales office in Dakar to expand its knowledge of metal aerials in the growing telecommunications market. STE GLOBAL SENEGAL offers a range of metal antenna suited to telephone, radio, and television antenna and equipment, (relay antenna, Yagi antenna and parabolic antenna).STE GLOBAL employees travel regularly in France, Spain, and Belgium. Occasionally, they perform installation and maintenance in Eastern Europe, North Africa, the Middle East, Mexico, Jordan, and Senegal. The company has its own in-house installation team with extensive experience in installing, lifting, disassembling, and maintaining guyed, self-supporting, and tubular masts. STE GLOBAL also provides and installs all equipment necessary for meteorological measurements, including data loggers, wind gauges, weathervanes, and other sensors of all brands.New products: LT47 guyed lattice masts, HD60 super-reinforced guyed lattice masts, self-supporting masts: new, effective, profitable solutions. STE GLOBAL can work on several models of mast as it has the tools to disassemble or install several of the most well-known mast models in Europe.

LOCATIONS

France, Spain, Senegal.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

X

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

S

STX FRANCE ENERGIES MARINESDesign and manufacture of foundations for offshore wind turbines, electrical

substations, and specialised ships

Avenue Bourdelle - BP 90180, 44613 Saint-Nazaire cedex+33 (0)2 51 10 90 12 +33 (0)2 51 10 48 71

www.stxeurope-offshore-energy.com [email protected]

ORGANIZATION

Organisation dedicated to marine energy, located at the former shipyard Chantier de l’Atlantique in Saint-Nazaire.

ACTIVITIES

Studies and manufacture of foundations for offshore wind turbines, electrical substations, and specialised ships; development of concepts and manufacture of prototypes. Services include: • Turnkey contracts• Engineering: basic and detailed design• Manufacturing• R&D.

LOCATIONS

Pays de la Loire.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

T

TECHNIPConstruction and installation of offshore structures

89 avenue de la Grande Armée, 75116 Paris+33 (0)1 47 78 25 53

[email protected]

ORGANIZATION

Technip is a world leader in project management, engineering, and construction for the energy industry. With sites in 48 countries on every continent, Technip has offices in Paris (head office), Lyon, and Marseille.

ACTIVITIES

From the deepest subsea developments to the largest, most complex onshore and offshore infrastructure, Technip’s 30,000 employees provide the best, most innovative solutions and technology to face the world’s energy challenges. Technip owns cutting-edge, industrial infrastructure and a fleet of specialised ships for pipe installation and underwater construction. As a major designer and provider of comprehensive energy solutions, Technip has delved into the renewable energy sector, focusing on biofuels, solar and marine energy, and the capture and storage of carbon and geothermal energy. In 2011, Technip expanded into offshore wind energy and created Technip Offshore Wind, a division dedicated entirely to the construction and installation of European offshore wind farms. In France, Technip, along with Iberdrola, Eole-RES, and Neoen Marine, was one of the winners of the government project to develop, build, and operate a wind farm on the Saint-Brieuc bay. The farm will consist of 100 wind turbines and cover 80 km2.

LOCATIONS

Île-de-France.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

T

TEXSYSAutomation, SCADA, System Engineering

14 avenue de l’Europe, 31520 Ramonville-Saint-Agne+33 (0)9 52 22 40 09 +33 (0)9 57 22 40 09

www.texsys.fr [email protected]

ORGANIZATION

TEXSYS is a SME specialised in the study, development and supply of automation and SCADA systems for renewable electricity production : wind, solar, hydro, wave and tidal power.

ACTIVITIES

TEXSYS provides its system named ACTEM to wind energy producers, on wind farms either under construction or already in operations.This system is a full SCADA system which enables the owner to monitor in real-time the wind turbines and in the long term to follow-up their production and performances. Fitted also for maintenance, it allows the operators to react quickly and to minimize the unavailability of the machines.TEXSYS also develops automation systems for managing wind farms production in conformity with the DEIE rules imposed by ERDF.Besides, we support our clients to define and develop with them any automation or instrumentation solution for specific needs.

LOCATIONS

We are implanted in Toulouse area in the Midi-Pyrénées region and we are providing our systems in wind farms located in France or in Europe.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

T

THEPAULT SUBSIDIARY OF SAG-

Electrical engineering, foundations, and earthworks

45 route de Metz, 57130 Jouy-aux-Arches +33 (0)3 87 38 41 41+33 (0)3 87 38 40 18 www.thepault.fr [email protected]

ORGANIZATION

A subsidiary of the Germany group SAG, the Thepault group specialises in the construction of high-voltage and medium voltage electrical infrastructure (overhead and underground lines and transformer stations).The Thepault group draws on the expertise of its various subsidiaries allowing it to cover every stage of network construction from the project phase right up to delivery of the equipment.

ACTIVITIES

The Thepault group is qualified to undertake framework contracts with some of France’s biggest prime contractors in electricity (RTE and ERDF) and telecommunications (France Télécom), and works with private, institutional, and local authority clients as well.The group’s trades and skills include:• HV, MV and LV overhead networks: engineering, foundations, assembly and lifting of supports, cable stringing, removal and dismantlement• Transformer substations: technical and administrative studies, civil engineering, substation construction, and connection to the grid• Underground networks: burying of HV, MV and LV electrical networks, telecommunications and television networks, connections, temporary connections, junction rooms, laying of networks in tunnels and confined spaces• Illumination and outdoor lighting: roadways, open spaces, sporting arenas, monuments, and civil engineering structures• Special construction: mechanised laying of networks, trenching and micro-trenching, directional drilling and boring• Alternative energy and sustainable development (wind, photovoltaic, biomass): pre-project tasks and administrative applications, access studies, burying of networks and laying of underground connections, connections to transformers, construction of delivery substations• Engineering offices: studies of overhead, underground networks and transformer substations, ground surveys, applications for construction and easement permits and right-of-way agreements• Environmental studies: feasibility studies (overhead and underground electrical lines, gas pipelines, roadway projects, etc.), impact studies, ensuring correctness of urban planning documents and administrative applications (construction permits, consulting, etc.)

LOCATIONS

Lorraine. National coverage.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

T

TPL INDUSTRIESTreatment of metal surfaces

ZA Auralis - La Maucarrière, 79600 Tessonnière+33 (0)5 49 64 42 49 +33 (0)5 49 64 42 50 [email protected]

ORGANIZATION

TPL INDUSTRIES specialises in surface treatments. It has an industrial clientele, whose products can be found in over 80 countries worldwide in a wide range sectors, such as wind power (wind turbine ball bearings, structures), airports (aircraft tugs, bag carts, stairs, and miscellaneous handling equipment), boilermaking (vats, pipes, skids, etc.), handling (bridge cranes, scissor lifts, davit arms, etc.).TPL INDUSTRIES has three workshops with a production area of 5,000 m2 featuring handling and treatment equipment. In 2008, the company had around €4 million in turnover and a staff of 35 employees.TPL INDUSTRIES offers a comprehensive line of services to help clients manage their flow. Services include picking up parts from clients’ sites, storing products before and after treatment, and delivery. TPL INDUSTRIES also has vehicles to do rounds to customers’ sites and can organise special transport on demand.

ACTIVITIES

TPL INDUSTRIES specialises in shot-peening, sandblasting (corundum and angular grit), metallisation, surface preparation (sanding, filling), and applying liquid paint for corrosion protection.TPL works hard to provide quality services and satisfy its clients by performing stringent inspections during production (verifying surface conditions, measuring thickness, using gloss metres, and performing pull-out tests) and by training its employees. Some of its operators are ACQPA-certified and work with OHGPI benchmarks.TPL INDUSTRIES provides guidance and advice for anti-corrosion systems, developing an ACQPA-certified single-coat to four-coat system to provide the solution to meet clients’ needs. Certified operators use complex systems that guarantee treatments will last for years.TPL INDUSTRIES performs treatments on carbon steel, galvanisation, aluminium, and stainless steel. It also applies all types of liquid paints, including glycerophthalate paint, zinc-based primers, solvent-free and food-grade epoxy, and polyurethane.

LOCATIONS

Head office in Poitou-Charentes.Geographical coverage throughout France.Workshops in Tessonnière, Louin, and Châtillon-sur-Thouet.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

U

UNIJECTManufacture of composite RTM parts

ZI Vallée du Bois - BP 44, 62450 Bapaume+33 (0)3 21 58 92 55 +33 (0)3 21 48 07 88

www.uniject.fr [email protected]

ORGANIZATION

Small business with 40 employees specialising in polyester and phenolic resin injection for the manufacture of large-scale single skin or sandwich parts. The company works primarily in industrial bodywork, manufacturing insulated doors for refrigerated lorries and semi-trailers, and formed parts.

ACTIVITIES

Testing for manufacture of small blades for prototypes.

LOCATIONS

Nord-Pas de Calais.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

V

VALEOL SUBSIDIARY OF VALOREM-

Facilities Management, Industry and R&D programs in wind energy

213 Parc de l’Intelligence Environnementale - Cours Victor Hugo, 33323 Bègles cedex

+33 (0)5 56 49 28 58 +33 (0)5 56 49 24 56www.valeol.fr [email protected]

ORGANIZATION

SAS. Staff: 8 EFT

ACTIVITIES

Subsidiary at 100% of VALOREM Group, Green Energy Productor, VALEOL brings technical and industrial expertise to develop and to implement VALOREM R&D programs.Thanks to its Know-How and skills of its engineers and Ph.Doctors, VALEOL takes profit of its direct contact with wind market to design and realize true applications and innovative solutions from patent to commissioning.Nowadays, VALEOL is involved in 3 european commission founded projects and 7 national founded projects regarding issues in Materials, Grids, Operation&Maintenance, in both On and Offshore, sharing its works with Large Companies and 1st ranking Universities Labs.VALEOL also provides Transportation, Mecanical Completion, Erection and Commissioning of wind turbines for Promotors, local Utilities and turbine Manufacturers, french or foreigners.This expertise brought VALEOL to offer services to customers or to follow them abroad in North and West Africa, Central America, Scandinavia and Eastern Europe.

LOCATIONS

Amiens, Rouen, Nantes, Bordeaux Bègles, Carcassonne.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

V

VALREA SUBSIDIARY OF VALOREM-

Engineering, project management and assistance to project owners

Espace Champlain, 59 rue Desseaux, 76100 Rouen+33 (0)2 35 12 29 50

www.valrea.fr [email protected]

ORGANIZATION

VALREA, a subsidiary of the VALOREM group, is specialised in project engineering, project management, assistance to project owners and consulting for the construction of wind farms and biogas and photovoltaic power plants. In 2010, the company had 15 employees based in Rouen and Bordeaux.With over 380 MW under its belt since 2007, VALREA has supervised over 34 construction sites in France for a many clients, including RWE, E.ON/Endesa, Eolfi/Veolia, VOLTALIA, RENERCO, TPF, Iberdrola, VALOREM, VIVAL ENERGIES, BL FINANCE, RF Invest, and more.

ACTIVITIES

VALREA performs all tasks for the project management of wind farm constructions, providing pre-project and project studies, assistance in awarding construction contracts, execution studies, approval, supervision of construction work, construction site scheduling/coordination/management, and assistance to project owner for acceptance.Working closely with clients, VALREA helps make projects a reality: • VALREA stays with project owners through all the construction phases to coordinate development and operation, from obtaining construction permits to commissioning, acceptance and final acceptance.• VALREA provides advice and helps clients make construction choices, optimise projects, choose vendors, carry out administrative procedures, and manage risk• VALREA is regularly present at construction sites to structure, plan, coordinate, and organise the worksite to meet deadlines, budgets, and quality, safety, and environmental requirements• VALREA helps clients obtain approvals and contracts for power grid and telecoms connections and handles the local and administrative tasks necessary to make your project successful.Backed by its extensive experience, VALREA also offers more specific missions involving assistance to project owners, auditing services in particular fields related to connection or construction. It is an expert in all areas of infrastructure construction and project engineering in France and abroad.

LOCATIONS

Aquitaine and Upper Normandy.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

V

VERLINDEManufacturer of lifting and handling equipment

2 boulevard de l’Industrie - BP 20059, 28509 Vernouillet cedex+33 (0)2 37 38 95 95 +33 (0)2 37 38 95 99

www.verlinde.fr [email protected]

ORGANIZATION

Founded in 1858, Verlinde supplied the naval and engineering industries with a revolutionary device: the wormscrew hoist. In 1918, when electricity was making its debut, Verlinde was the first manufacturer in France to design and sell winches and hoists.

ACTIVITIES

Verlinde is France’s number one manufacturer of lifting and handling equipment, offering ranges of equipment specifically made for the wind power industry (electric chain hoists and electric winches for wind turbines).

LOCATIONS

Centre.Offices worldwide.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

V

VOITH TURBO SUBSIDIARY OF VOITH TURBO GMBH & CO. KG-

Power transmission, drive and control technology

21 boulevard Champy Richardets, 93166 Noisy-le-Grand+33 (0)1 48 15 69 38 +33 (0)1 48 15 69 30

www.voith.fr [email protected]

ORGANIZATION

Voith Turbo, specialising in heavy machinery, was founded in Germany by a craftsman in 1860. Today, the Voith group is present in around 40 countries on five continents. Through various industrial companies and commercial subsidiaries, Voith is a leader in most of its sectors. In 2008-09, the company achieved a turnover of €5.1 billion and employed 39,330 people. Voith’s products include automatic gearboxes, hydrodynamic transmissions, reduction gears, fluid couplings, universal drives, and gearboxes.

ACTIVITIES

In the wind power industry, Voith’s WinDrive is a variable hydromechanical gearbox. Its innovative technology drives generators at a constant given speed, despite large variations in the turbine’s rotor speed. This makes it possible to use synchronous generators, which are known for their reliability and can deliver MV currents.The WinDrive is composed of an epicyclic gearbox and a hydrokinetic torque converter working in parallel.The main components of the wind turbine are thus, in the direction of energy transmission: the wind turbine’s main rotor, the main shaft, the main gearbox, the WinDrive variable gearbox, and the generator (no power electronics). The WinDrive can transfer up to 8 MW of power.

LOCATIONS

Head office in Île-de-France.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

W

WESERWINDEuropean specialist in foundations for offshore wind turbines

Riedemannstraße 1, D-27572 Bremerhaven+49 04 71 8 09 31 0

www.weserwind.de [email protected]

ORGANIZATION

Founded in 2002, WeserWind has a staff of over 500 employees and specialises in complex steel structures for offshore wind farms. With over 10 years of experience, 100 tripods and 5 substations built, and major R&D, WeserWind is an acknowledged specialist in the offshore wind energy market. Located in Bremerhaven, the European hub for the offshore wind power industry, we also offer storage capacities for up to 60 foundations, to help you optimise your installation strategies.

ACTIVITIES

• Foundation production (tripods, jackets, transition pieces). Thanks to its new Am Lunedeich production facilities, WeserWind can produce almost any size! The largest foundations on the market were produced by WeserWind.• Electric substation (foundation and topside). With its long experience, WeserWind is ready to face any challenge.These two products are available in production only, or in EPC.In association with these products, WeserWind offers O&M services to ensure the parts continue to function properly.

LOCATIONS

Germany.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

W

WIND DIRECT SERVICESProducts, systems and services for wind turbine operation and maintenance

Aéroparc A13Bis - 12 rue de Caulet, 31300 Toulouse+33 (0)5 34 51 58 16 +33 (0)9 58 67 21 60

www.wind-ds.com [email protected]

ORGANIZATION

Wind Direct Services was founded in early 2009 to provide technical services and solutions to wind power players, including operators, maintenance firms and builders of wind turbines.Our products, services, and solutions are the culmination of many years of experience in the sector and provide outstanding cost-effectiveness to our partners and clients.We are constantly striving to improve our services and solutions to make wind energy more competitive. Our experience, quality of service, responsiveness, competitiveness, and professionalism guarantee your satisfaction.

ACTIVITIES

Services:

• Installation of additional equipment, vibration analysis systems (CMS), and particle counting• Technical inspections (nacelles, blades, rotors, masts, weathervanes, etc.)• Performance monitoring and wind farm operation• Measurements and non-destructive inspections (laser alignment, endoscopy, thermal cameras, etc.)• Installation and replacement of aircraft warning lightsDistribution and hiring out:

• Specific tools (wrenches, hydraulic cylinders)• Measuring devices• Devices for non-destructive inspectionsDistribution:

• Consumables• Spare parts• Personal protective equipment

LOCATIONS

Midi-Pyrénées, Toulouse.

PAR

TNER

SBU

SIN

ESSE

S SE

LEC

TED

TRA

ININ

G C

ENTR

ESM

AN

UFA

CTU

RER

SD

EVEL

OPE

RS/

OPE

RA

TOR

S


SUPP

LIER

S

W

WIND PROSPECTTechnical assessment, operation and construction

22 rue de Palestro, 75002 Paris+33 (0) 175 770 680

www.windprospect.com [email protected]

ORGANIZATION

Leading service provider, Wind Prospect is an independent group of technical experts at the investors’ service.Since 1995, Wind Prospect is a reference platform delivering audit and technical advisory, asset management, technical inspections and construction to the renewable industry (wind, solar, hydro).Wind Prospect has been active in France since 2007 through 6 regional offices located at the nearest of sites.MANAGEMENT: • French Director: Barthélémy Rouer• Group Director: Euan CameronSTAFF: • France: 25 staff• Wind Prospect Group: 200 staff

ACTIVITIES

• Audit & Advisory: On behalf of buyers, lenders or sellers, Wind Prospect has conducted audits on more than 35 GW to date. Wind Prospect identifies the risk profile of a project from the technical, administrative and economical points of view and advocates for the interests of its clients during negotiation phases.• Asset Management: As a one-stop boutique for third party owners, Wind Prospect takes care of the whole administrative and technical management. Beginning 2014, Wind Prospect operates an aggregated capacity of 850+ MW.• Tests & Measurements – Construction: Our experts carry out more than 500 technical inspections each year. During construction phase Wind Prospect issues calls for tenders, negotiates contracts, monitors construction works and commissioning.

LOCATIONS

France: Amiens, Issoudun, Lyon, Nancy, Paris (HQs’), Toulouse.Worldwide: South Africa, Australia, China, Ireland, Poland, United-Kingdom (HQs’), Turkey.


#

3E FRANCE …………………………………… 130

8.2 FRANCE …………………………………… 131

A

ABB …………………………………………… 132

ACCES DIFFICILES SERVICES …………………… 133

ACOEM, 01DB-METRAVIB SAS ………………… 134

ACROPHOTO …………………………………… 135

ACTEMIUM …………………………………… 136

ACTEMIUM DUNKERQUE ……………………… 137

AETE ENERGIE …………………………………… 36

AGRAFE ENR …………………………………… 138

AILENERGIE CHAMPAGNE ARDENNE ……………… 76

AINELEC ……………………………………… 139

ALIOS INGENIERIE ……………………………… 140

ALIZEO …………………………………………… 59

ALMEA ………………………………………… 142

ALSTOM ………………………………………… 60

ALTEAD ………………………………………… 143

ANDRE LAURENT ……………………………… 144

ANTEAGROUP ………………………………… 145

ANVIS INDUSTRY ……………………………… 146

APAVE ………………………………………… 147

APPLISURFACES ……………………………… 148

ARCADIS ……………………………………… 150

AREVA - BU OFFSHORE WIND ……………………… 62

AREVA NP - ETABLISSEMENT DE JEUMONT ……… 151

ARTELIA EAU ET ENVIRONNEMENT ……………… 152

ASSISTANCE AERONAUTIQUE ET AEROSPATIALE … 153

ATV …………………………………………… 154

AUTAN ENVIRONNEMENT ……………………… 155

AVENISENSE …………………………………… 156

AYALA ………………………………………… 157

B

BATTERIES GLOBAL SERVICES ………………… 158

BAUDIN CHATEAUNEUF ………………………… 159

BAYWA R.E. FRANCE SAS ………………………… 77

BECK CRESPEL ………………………………… 160

BERTHOLD……………………………………… 161

BESNÉ MÉCANIQUE DE PRÉCISION ……………… 37

BEUZIT FRANCOIS SARL ………………………… 162

BLP (Bolloré Logistique Portuaire) ……………… 163

BMP …………………………………………… 164

BONFIGLIOLI TRANSMISSIONS ………………… 165

BOREAS ………………………………………… 79

BOSCH REXROTH ……………………………… 166

BOT FONDERIE ………………………………… 167

BOTTE FONDATIONS …………………………… 168

BOTTE SONDAGES ……………………………… 169

BRETAGNE DEVELOPPEMENT INNOVATION ………… 21

BRETAGNE POLE NAVAL …………………………… 22

BRÜEL & KJAER VIBRO ………………………… 170

BUREAU VERITAS ……………………………… 171

BURKERT CONTROMATIC FRANCE ……………… 172

C

C.E.P.S. (Centre d’Etude et de Pratique de la Survie) 52

CAHORS DIVISION MOYENNE TENSION ………… 173

CAP INGELEC ………………………………… 174

CAPELLE ……………………………………… 175

CATEXE-CATEOLE ……………………………… 176

CATHIE ASSOCIATES …………………………… 177

CCI LITTORAL NORMAND-PICARD ………………… 24

CEGELEC RENEWABLE ENERGIES ……………… 178

CG SALES NETWORKS FRANCE ………………… 179

CHOMARAT …………………………………… 180

CITA PRODUCTION ……………………………… 181

CLM INDUSTRIE ………………………………… 182

CMD GEARS …………………………………… 183

CMI TECH 51 PASTOR ………………………… 184

CMR FRANCE (Contrôle Mesure Regulation) …… 186

ALPHABETICAL INDEXINDEX


COBHAM SLIPRINGS …………………………… 187

COFELY ENDEL ………………………………… 188

COFELY INEO …………………………………… 189

COLAS ………………………………………… 190

COMER INDUSTRIES …………………………… 191

COMPAGNIE NATIONALE DU RHÔNE (CNR) ……… 80

CORDIAL ……………………………………… 192

CORDM ………………………………………… 193

CTE WIND CIVIL ENGINEERING ………………… 194

D

D2M ENGINEERING …………………………… 195

DAHER INTERNATIONAL ………………………… 196

DCNS ………………………………………… 197

DDIS ……………………………………………… 65

DEC+ ………………………………………… 198

DEF …………………………………………… 199

DEKRA INDUSTRIAL …………………………… 200

DELTABOX-SERA………………………………… 201

DEUBLIN SARL ………………………………… 202

DEWI FRANCE ………………………………… 203

DIALOG …………………………………………… 38

DINALEC SCOP SA ……………………………… 204

DM TABLEAUX ………………………………… 205

DNV GL (ex GL GARRAD HASSAN France) ……… 206

DONG ENERGY …………………………………… 82

DOUCE-HYDRO SAS …………………………… 207

DUFF NORTON EUROPE ………………………… 208

DUFOUR ……………………………………… 209

DUNKERQUE PROMOTION ………………………… 25

E

E.ON ……………………………………………… 83

EADS ASTRIUM ………………………………… 210

ECL …………………………………………… 211

ECO DELTA ……………………………………… 84

ECOTERA DEVELOPPEMENT SAS ………………… 85

EDF EN SERVICES ……………………………… 212

EDF ENERGIES NOUVELLES ……………………… 86

EG SOL ………………………………………… 213

EIFFAGE CONSTRUCTION HAUTE NORMANDIE … 214

EIFFAGE CONSTRUCTION METALLIQUE ………… 215

ELECTRAWINDS …………………………………… 87

EMCC ………………………………………… 216

ENCIS ÉNERGIES VERTES ……………………… 217

ENCIS WIND …………………………………… 218

ENEL GREEN POWER FRANCE …………………… 88

ENERCON GMBH ………………………………… 66

ENERPAC ……………………………………… 219

ENERTRAG ……………………………………… 89

ENERYO ………………………………………… 90

EOLE AVENIR DEVELOPPEMENT …………………… 91

EOLE SYSTEM ………………………………… 220

EOLECLEAN …………………………………… 221

EOLFI …………………………………………… 92

EOLISSIMA ……………………………………… 26

EOLTECH ……………………………………… 222

EOLYS RESSOURCES ET ENERGIES ……………… 223

EPSILON COMPOSITE ………………………… 224

EPURON SAS ……………………………………… 93

ERNEO ………………………………………… 225

ETAIR MEDITERRANEE ………………………… 226

ETHM ………………………………………… 227

ETV …………………………………………… 228

EUROCAPE NEW ENERGY FRANCE ………………… 94

EUROPE TECHNOLOGIES ……………………… 229

F

FALCK ENERGIES RENOUVELABLES ……………… 95

FAUCHE AUTOMATION AQUITAINE ……………… 230

FAVIER TPL……………………………………… 231

FDKOMPOSITES ………………………………… 232

FERRY CAPITAIN …………………………………… 39

FIXATOR…………………………………………… 40

FMGC …………………………………………… 41

FONDASOL …………………………………… 233

FONDASOLUTIONS …………………………… 234

FONDEOLE …………………………………… 235

FONDERIE HELLIN ……………………………… 236

FORGITAL DEMBIERMONT S.A.S ………………… 237

INDEX


FOSELEV ……………………………………… 238

FOURÉ LAGADEC SARL …………………………… 42

FRANCEOLE …………………………………… 239

FRANKI FONDATION …………………………… 240

G

G-TEC SA ……………………………………… 241

GAMESA EOLICA ………………………………… 67

GANTOIS SA …………………………………… 242

GDF SUEZ ………………………………………… 96

GE ENERGY POWER CONVERSION ……………… 243

GE WIND ENERGY ………………………………… 68

GEG ENERGIES NOUVELLES ET RENOUVELABLES … 99

GEOLIS ………………………………………… 100

GEOTEC ……………………………………… 244

GEOTECH INDUSTRIES ………………………… 245

GINGER CEBTP ………………………………… 246

GKN STROMAG FRANCE - SIME BRAKES ………… 247

GLOBAL WIND POWER FRANCE ………………… 101

GROUPE INICIA - FLUIDEXPERT / NOVIUM ……… 248

GROUPE PRESTIA ……………………………… 249

GUERTON ……………………………………… 250

H

HAWE-OTELEC SAS …………………………… 252

HUTCHINSON ………………………………… 253

HYDAC ………………………………………… 254

HYDRATIGHT SAS ……………………………… 256

HYDROGEOTECHNIQUE ………………………… 257

HYSEO ………………………………………… 102

HYTORC ……………………………………… 258

I

IDEA LOGISTIQUE ……………………………… 259

IDEOL ………………………………………… 260

IDEX SAS ……………………………………… 103

IFM ELECTRONIC ……………………………… 261

IN VIVO ………………………………………… 263

INGETEAM SAS ………………………………… 264

INITIATIVES & ENERGIES LOCALES ……………… 104

ITRON ………………………………………… 266

J

JADE …………………………………………… 267

JAMES WALKER ………………………………… 268

JEFMAG ……………………………………… 269

JEUMONT ELECTRIC SAS ……………………… 270

JIFMAR OFFSHORE SERVICES SAS ……………… 271

JMA ENERGIES ………………………………… 105

JP ENERGIE ENVIRONNEMENT ………………… 106

K

KEOPS AUTOMATION …………………………… 272

KTR FRANCE …………………………………… 273

L

LA COMPAGNIE DU VENT ……………………… 107

LA FONTE ARDENNAISE ………………………… 274

LE MANS WIND CLUSTER ………………………… 27

LEROY-SOMER ………………………………… 275

LINAK FRANCE ………………………………… 276

LOUIS DREYFUS ARMATEURS …………………… 277

LP RAOUL MORTIER (Lycée des métiers des énergies et

des services aux entreprises) …………………… 53

LUFKIN FRANCE ………………………………… 278

LYCEE DHUODA …………………………………… 54

LYCEE FRANCOIS BAZIN …………………………… 55

M

MADEP ………………………………………… 279

MAÏA EOLIS …………………………………… 108

MANCHE MARINE INDUSTRIE …………………… 280

MANOFFSHORE ………………………………… 281

MANOIR INDUSTRIES …………………………… 282

MARC S.A. …………………………………… 283

MASER ENGINEERING ………………………… 284

MCCF ………………………………………… 285

MEDIACO LEVAGE ……………………………… 287

MENARD ……………………………………… 288

MERCERON TP ………………………………… 291

MERSEN ……………………………………… 292


METAL DEPLOYE RESISTOR ……………………… 294

METEODYN …………………………………… 295

MICEL ………………………………………… 296

MOOG ………………………………………… 297

MOTEURS J.M. ………………………………… 298

MSB …………………………………………… 299

N

NASS&WIND INDUSTRIE ……………………… 300

NASS&WIND SAS ……………………………… 109

NATURAL POWER ……………………………… 301

NAVALU ………………………………………… 302

NAVTIS ………………………………………… 303

NENUPHAR …………………………………… 304

NEOEN ………………………………………… 110

NEOPOLIA EMR …………………………………… 28

NET WIND ……………………………………… 305

NEXANS ……………………………………… 306

NHEOLIS ……………………………………… 307

NICOLAS ……………………………………… 308

NIDAPLAST COMPOSITES ……………………… 309

NOMA COMPOSITES SAS ……………………… 310

NORDEX FRANCE ………………………………… 69

NOUVERGIES ………………………………… 111

NOVEOL ……………………………………… 311

NTN-SNR ROULEMENTS ………………………… 312

O

OBSTA ………………………………………… 313

OILGEAR TOWLER ……………………………… 314

ONEM (Ouest Normandie Energie Marine) ……… 29

ORATECH INNOVATION ………………………… 315

ORMAZABAL - ORMAPOST ……………………… 316

OSEAN ………………………………………… 317

OSTWIND INTERNATIONAL ……………………… 112

OT ENGINEERING ……………………………… 318

P

PALFINGER FRANCE …………………………… 319

PARKER HANNIFIN FRANCE SAS ………………… 320

PARKER OLAER ………………………………… 321

PAUMELLE ………………………………………… 43

PICARDY - SOMME WIND POWER NETWORK ……… 30

PIRIOU ………………………………………… 322

PLASTIMA COMPOSITES…………………………… 44

PLASTINOV SNE ………………………………… 323

PÔLE MER MEDITERRANÉE ……………………… 31

PROMARITIME INTERNATIONAL ………………… 324

PROMIC ……………………………………… 325

PRONAL SAS ……………………………………… 45

Q

QUADRAN (JMB énergie + Aérowatt) ………… 113

R

REETEC FRANCE ……………………………… 326

RÉGION CHAMPAGNE-ARDENNE ………………… 32

REPACK-S ……………………………………… 327

REVEL ………………………………………… 328

ROLLIX - DEFONTAINE ………………………… 329

ROXTEC FRANCE SAS…………………………… 330

S

S.O.M. (Services Organisation Méthodes) ……… 331

SAFOR ………………………………………… 332

SAFT …………………………………………… 333

SAINT-LAURENT ENERGIE ……………………… 114

SAIPEM ………………………………………… 334

SAMEOLE ……………………………………… 115

SARENS FRANCE ……………………………… 335

SBS FORGE …………………………………… 336

SCAIME SAS …………………………………… 337

SCHAEFFLER FRANCE SAS ……………………… 338

SCHNEIDER ELECTRIC FRANCE ………………… 340

SCOTT BADER SA ……………………………… 341

SDI (Société de Dragage International) ………… 344

SDMO ………………………………………… 343

SEL ENERBETON ……………………………… 346

SEMA (Société d’Entreprise Metallurgique d’Armor) 347

SEMANTIC TS…………………………………… 348

SENVION FRANCE SAS …………………………… 70

SERGIES ……………………………………… 116

INDEX


SERHY ………………………………………… 349

SETEC ENERGY SOLUTIONS …………………… 350

SGS QUALITEST INDUSTRIE …………………… 351

SGURRENERGY ………………………………… 352

SIEMENS WIND POWER …………………………… 71

SIKA INDUSTRY ………………………………… 353

SIMRIT ………………………………………… 355

SKF IN FRANCE ………………………………… 356

SNEF …………………………………………… 358

SOBEC SARL …………………………………… 359

SOCAH DIVISION HYDRAULIQUE ………………… 360

SOFIVA ENERGIE ……………………………… 118

SOGEBRAS …………………………………… 361

SOLIMAN LEVAGE ……………………………… 362

SOLUTIONS COMPOSITES ………………………… 46

SOURIAU ……………………………………… 363

SPIE ENERGIES NOUVELLES …………………… 365

ST INDUSTRIES …………………………………… 47

STATKRAFT FRANCE SAS ………………………… 117

STE GLOBAL …………………………………… 366

STO LOGISTIQUE ………………………………… 48

STX FRANCE ENERGIES MARINES ……………… 368

T

TE2M …………………………………………… 49

TECHNIP ……………………………………… 369

TEXSYS ………………………………………… 370

THEOLIA FRANCE ……………………………… 119

THEPAULT ……………………………………… 371

TPL INDUSTRIES ……………………………… 372

U

UBIFRANCE ……………………………………… 33

UNIJECT ……………………………………… 373

UNITE ………………………………………… 120

V

VALEOL ………………………………………… 374

VALREA ………………………………………… 375

VELOCITA ENERGIES …………………………… 121

VENDÉE ENERGIE ……………………………… 122

VENT D’EST SAS ……………………………… 123

VENTS D’OC ENERGIES RENOUVELABLES ……… 124

VERGNET ………………………………………… 73

VERLINDE ……………………………………… 376

VESTAS FRANCE ………………………………… 72

VOITH TURBO…………………………………… 377

VOL-V SAS ……………………………………… 125

VOLTALIA ……………………………………… 126

W

WESERWIND …………………………………… 378

WIND DIRECT SERVICES ……………………… 379

WIND FOR FUTURE ……………………………… 34

WIND PROSPECT ……………………………… 380

WINDLAB ………………………………………… 56

WINDVISION …………………………………… 127

WPD OFFSHORE FRANCE ……………………… 128


AIRCRAFT WARNING LIGHTS

DELTABOX-SERA………………………………… 201ENCIS WIND …………………………………… 218OBSTA ………………………………………… 313PROMIC ……………………………………… 325REETEC FRANCE ……………………………… 326

ASSEMBLY AND MAINTENANCE

ACCES DIFFICILES SERVICES …………………… 133ACOEM, 01DB-METRAVIB SAS ………………… 134AGRAFE ENR …………………………………… 138ALMEA ………………………………………… 142ALTEAD ………………………………………… 143AREVA NP - ETABLISSEMENT DE JEUMONT ……… 151CMI TECH 51 PASTOR ………………………… 184COFELY ENDEL ………………………………… 188CORDIAL ……………………………………… 192EDF EN SERVICES ……………………………… 212EMCC ………………………………………… 216EOLECLEAN …………………………………… 221ETAIR MEDITERRANEE ………………………… 226FIXATOR…………………………………………… 40FOURÉ LAGADEC SARL …………………………… 42JADE …………………………………………… 267KEOPS AUTOMATION …………………………… 272LUFKIN FRANCE ………………………………… 278MASER ENGINEERING ………………………… 284NET WIND ……………………………………… 305PALFINGER FRANCE …………………………… 319REETEC FRANCE ……………………………… 326SAIPEM ………………………………………… 334SDI (SOCIÉTÉ DE DRAGAGE INTERNATIONAL) …… 344TEXSYS ………………………………………… 370WIND DIRECT SERVICES ……………………… 379WIND PROSPECT ……………………………… 380

BLADES

ATV …………………………………………… 154

CHOMARAT …………………………………… 180EADS ASTRIUM ………………………………… 210EPSILON COMPOSITE ………………………… 224ETAIR MEDITERRANEE ………………………… 226FDKOMPOSITES ………………………………… 232PLASTINOV SNE ………………………………… 323SCOTT BADER SA ……………………………… 341UNIJECT ……………………………………… 373

BRAKES


CAST PARTS

BOT FONDERIE ………………………………… 167FERRY CAPITAIN …………………………………… 39GEOTECH INDUSTRIES ………………………… 245LA FONTE ARDENNAISE ………………………… 274MANOIR INDUSTRIES …………………………… 282

DOMESTIC WIND POWER

EOLE SYSTEM ………………………………… 220EOLYS RESSOURCES ET ENERGIES ……………… 223NHEOLIS ……………………………………… 307NOVEOL ……………………………………… 311

ELECTRICAL ENGINEERING

ACTEMIUM …………………………………… 136ACTEMIUM DUNKERQUE ……………………… 137BEUZIT FRANCOIS SARL ………………………… 162CAHORS DIVISION MOYENNE TENSION ………… 173CAP INGELEC ………………………………… 174CEGELEC RENEWABLE ENERGIES ……………… 178COFELY INEO …………………………………… 189DINALEC SCOP SA ……………………………… 204DM TABLEAUX ………………………………… 205FAUCHE AUTOMATION AQUITAINE ……………… 230FONDEOLE …………………………………… 235MADEP ………………………………………… 279ORMAZABAL - ORMAPOST ……………………… 316

INDEX BY SPECIALITYINDEX


OT ENGINEERING ……………………………… 318SCHNEIDER ELECTRIC FRANCE ………………… 340SEL ENERBETON ……………………………… 346SNEF …………………………………………… 358SPIE ENERGIES NOUVELLES …………………… 365THEPAULT ……………………………………… 371

ELECTRICAL MATERIALS AND COMPONENTS

ABB …………………………………………… 132AINELEC ……………………………………… 139AVENISENSE …………………………………… 156BATTERIES GLOBAL SERVICES ………………… 158CAHORS DIVISION MOYENNE TENSION ………… 173CG SALES NETWORKS FRANCE ………………… 179CMR FRANCE (CONTRÔLE MESURE REGULATION) 186COBHAM SLIPRINGS …………………………… 187DEF …………………………………………… 199DEUBLIN SARL ………………………………… 202ERNEO ………………………………………… 225FAVIER TPL……………………………………… 231GE ENERGY POWER CONVERSION ……………… 243GROUPE INICIA - FLUIDEXPERT / NOVIUM ……… 248IFM ELECTRONIC ……………………………… 261INGETEAM SAS ………………………………… 264ITRON ………………………………………… 266JEUMONT ELECTRIC SAS ……………………… 270LEROY-SOMER ………………………………… 275LINAK FRANCE ………………………………… 276MADEP ………………………………………… 279MERSEN ……………………………………… 292METAL DEPLOYE RESISTOR ……………………… 294MICEL ………………………………………… 296MOOG ………………………………………… 297MOTEURS J.M. ………………………………… 298NEXANS ……………………………………… 306OILGEAR TOWLER ……………………………… 314ORMAZABAL - ORMAPOST ……………………… 316PARKER HANNIFIN FRANCE SAS ………………… 320SAFT …………………………………………… 333SCAIME SAS …………………………………… 337SCHNEIDER ELECTRIC FRANCE ………………… 340SDMO ………………………………………… 343

SOURIAU ……………………………………… 363

TE2M …………………………………………… 49

TEXSYS ………………………………………… 370

EXPERT ASSESSMENTS

3E FRANCE …………………………………… 130

8.2 FRANCE …………………………………… 131



CMR FRANCE (CONTRÔLE MESURE REGULATION) 186



DEWI FRANCE ………………………………… 203

DNV GL (EX GL GARRAD HASSAN FRANCE) …… 206


EOLTECH ……………………………………… 222

G-TEC SA ……………………………………… 241

IN VIVO ………………………………………… 263


NET WIND ……………………………………… 305

OSEAN ………………………………………… 317


SEMANTIC TS…………………………………… 348

SERHY ………………………………………… 349


SGURRENERGY ………………………………… 352

S.O.M. (SERVICES ORGANISATION MÉTHODES) … 331

VALEOL ………………………………………… 374

VALREA ………………………………………… 375



FLANGES AND SLEWING RINGS

CMD GEARS …………………………………… 183






SBS FORGE …………………………………… 336

SKF IN FRANCE ………………………………… 356


FOUNDATIONS AND EARTHWORKS

ARCADIS ……………………………………… 150BERTHOLD……………………………………… 161BEUZIT FRANCOIS SARL ………………………… 162BOTTE FONDATIONS …………………………… 168CEGELEC RENEWABLE ENERGIES ……………… 178COFELY INEO …………………………………… 189COLAS ………………………………………… 190CTE WIND CIVIL ENGINEERING ………………… 194EG SOL ………………………………………… 213EIFFAGE CONSTRUCTION HAUTE NORMANDIE … 214EIFFAGE CONSTRUCTION METALLIQUE ………… 215EMCC ………………………………………… 216ETV …………………………………………… 228FMGC …………………………………………… 41FONDASOLUTIONS …………………………… 234FONDEOLE …………………………………… 235FRANKI FONDATION …………………………… 240IDEOL ………………………………………… 260MARC S.A. ……………………………………… 283MCCF ………………………………………… 285MENARD ……………………………………… 288MERCERON TP ………………………………… 291OT ENGINEERING ……………………………… 318SAIPEM ………………………………………… 334SPIE ENERGIES NOUVELLES …………………… 365STX FRANCE ENERGIES MARINES ……………… 368THEPAULT ……………………………………… 371WESERWIND …………………………………… 378

GEOTECHNICAL SURVEYS

ALIOS INGENIERIE ……………………………… 140ANTEAGROUP ………………………………… 145ARCADIS ……………………………………… 150BOTTE SONDAGES ……………………………… 169CATHIE ASSOCIATES …………………………… 177EG SOL ………………………………………… 213FONDASOL …………………………………… 233GEOTEC ……………………………………… 244GINGER CEBTP ………………………………… 246G-TEC SA ……………………………………… 241HYDROGEOTECHNIQUE ………………………… 257

SAFOR ………………………………………… 332SEMANTIC TS…………………………………… 348

INSPECTION OFFICES

APAVE ………………………………………… 147BUREAU VERITAS ……………………………… 171DEKRA INDUSTRIAL …………………………… 200SGS QUALITEST INDUSTRIE …………………… 351

MASTS

BAUDIN CHATEAUNEUF ………………………… 159EIFFAGE CONSTRUCTION METALLIQUE ………… 215FOURÉ LAGADEC SARL …………………………… 42FRANCEOLE …………………………………… 239GUERTON ……………………………………… 250SEMA (SOCIÉTÉ D’ENTREPRISE METALLURGIQUE D’ARMOR) ……………………………………… 347

MECHANICAL PARTS

ANDRE LAURENT ……………………………… 144ANVIS INDUSTRY ……………………………… 146APPLISURFACES ……………………………… 148BECK CRESPEL ………………………………… 160BESNÉ MÉCANIQUE DE PRÉCISION ……………… 37BONFIGLIOLI TRANSMISSIONS ………………… 165BOSCH REXROTH ……………………………… 166BRÜEL & KJAER VIBRO ………………………… 170BURKERT CONTROMATIC FRANCE ……………… 172CITA PRODUCTION ……………………………… 181CLM INDUSTRIE ………………………………… 182CMD GEARS …………………………………… 183CORDM ………………………………………… 193DEC+ ………………………………………… 198DEUBLIN SARL ………………………………… 202DOUCE-HYDRO SAS …………………………… 207DUFF NORTON EUROPE ………………………… 208ECL …………………………………………… 211ENERPAC ……………………………………… 219EUROPE TECHNOLOGIES ……………………… 229FERRY CAPITAIN …………………………………… 39FIXATOR…………………………………………… 40FONDERIE HELLIN ……………………………… 236GANTOIS SA …………………………………… 242

INDEX


GROUPE INICIA - FLUIDEXPERT / NOVIUM ……… 248HAWE-OTELEC SAS …………………………… 252HUTCHINSON ………………………………… 253HYDAC ………………………………………… 254HYDRATIGHT SAS ……………………………… 256HYTORC ……………………………………… 258IFM ELECTRONIC ……………………………… 261JAMES WALKER ………………………………… 268JEFMAG ……………………………………… 269KTR FRANCE …………………………………… 273LINAK FRANCE ………………………………… 276LUFKIN FRANCE ………………………………… 278MANCHE MARINE INDUSTRIE …………………… 280MANOIR INDUSTRIES …………………………… 282MOOG ………………………………………… 297MSB …………………………………………… 299NTN-SNR ROULEMENTS ………………………… 312OILGEAR TOWLER ……………………………… 314PARKER HANNIFIN FRANCE SAS ………………… 320PARKER OLAER ………………………………… 321PAUMELLE ………………………………………… 43REPACK-S ……………………………………… 327ROXTEC FRANCE SAS…………………………… 330SBS FORGE …………………………………… 336SCHAEFFLER FRANCE SAS ……………………… 338SIKA INDUSTRY ………………………………… 353SIMRIT ………………………………………… 355SKF IN FRANCE ………………………………… 356SOCAH DIVISION HYDRAULIQUE ………………… 360SOURIAU ……………………………………… 363ST INDUSTRIES …………………………………… 47TPL INDUSTRIES ……………………………… 372VOITH TURBO…………………………………… 377

NACELLES

ASSISTANCE AERONAUTIQUE ET AEROSPATIALE … 153BMP …………………………………………… 164CHOMARAT …………………………………… 180EUROPE TECHNOLOGIES ……………………… 229NIDAPLAST COMPOSITES ……………………… 309NOMA COMPOSITES SAS ……………………… 310PLASTIMA COMPOSITES…………………………… 44

SOLUTIONS COMPOSITES ………………………… 46UNIJECT ……………………………………… 373

OFFSHORE

AETE ENERGIE …………………………………… 36CATHIE ASSOCIATES …………………………… 177D2M ENGINEERING …………………………… 195DCNS ………………………………………… 197EIFFAGE CONSTRUCTION METALLIQUE ………… 215EMCC ………………………………………… 216ETHM ………………………………………… 227FMGC …………………………………………… 41FONDERIE HELLIN ……………………………… 236GROUPE PRESTIA ……………………………… 249G-TEC SA ……………………………………… 241IDEOL ………………………………………… 260IN VIVO ………………………………………… 263JIFMAR OFFSHORE SERVICES SAS ……………… 271LOUIS DREYFUS ARMATEURS …………………… 277MANCHE MARINE INDUSTRIE …………………… 280MANOFFSHORE ………………………………… 281NASS&WIND INDUSTRIE ……………………… 300NAVALU ………………………………………… 302NAVTIS ………………………………………… 303NENUPHAR …………………………………… 304OSEAN ………………………………………… 317PALFINGER FRANCE …………………………… 319PIRIOU ………………………………………… 322PROMARITIME INTERNATIONAL ………………… 324PRONAL SAS ……………………………………… 45SAIPEM ………………………………………… 334SDI (SOCIÉTÉ DE DRAGAGE INTERNATIONAL) …… 344SEMANTIC TS…………………………………… 348SOBEC SARL …………………………………… 359STO LOGISTIQUE ………………………………… 48STX FRANCE ENERGIES MARINES ……………… 368TECHNIP ……………………………………… 369WESERWIND …………………………………… 378

PARTNERS OF THE WINDUSTRY FRANCE PROJECT

BRETAGNE DEVELOPPEMENT INNOVATION ………… 21BRETAGNE POLE NAVAL …………………………… 22


CCI LITTORAL NORMAND-PICARD ………………… 24DUNKERQUE PROMOTION ………………………… 25EOLISSIMA ……………………………………… 26LE MANS WIND CLUSTER ………………………… 27NEOPOLIA EMR …………………………………… 28ONEM (OUEST NORMANDIE ENERGIE MARINE) …… 29PICARDY - SOMME WIND POWER NETWORK ……… 30PÔLE MER MEDITERRANÉE ……………………… 31RÉGION CHAMPAGNE-ARDENNE ………………… 32UBIFRANCE ……………………………………… 33WIND FOR FUTURE ……………………………… 34

SPECIAL TRANSPORT, LOGISTICS, HANDLING, AND HOISTING

ALTEAD ………………………………………… 143AYALA ………………………………………… 157BAUDIN CHATEAUNEUF ………………………… 159BLP (BOLLORÉ LOGISTIQUE PORTUAIRE) ………… 163CAPELLE ……………………………………… 175CATEXE-CATEOLE ……………………………… 176DAHER INTERNATIONAL ………………………… 196DIALOG …………………………………………… 38DUFOUR ……………………………………… 209EMCC ………………………………………… 216FOSELEV ……………………………………… 238IDEA LOGISTIQUE ……………………………… 259MANOFFSHORE ………………………………… 281MEDIACO LEVAGE ……………………………… 287NICOLAS ……………………………………… 308PALFINGER FRANCE …………………………… 319PROMARITIME INTERNATIONAL ………………… 324REVEL ………………………………………… 328SAIPEM ………………………………………… 334SARENS FRANCE ……………………………… 335SDI (SOCIÉTÉ DE DRAGAGE INTERNATIONAL) …… 344SOGEBRAS …………………………………… 361SOLIMAN LEVAGE ……………………………… 362VERLINDE ……………………………………… 376

TRAINING CENTRES

C.E.P.S. (CENTRE D’ETUDE ET DE PRATIQUE DE LA SURVIE) ………………………………………… 52

LP RAOUL MORTIER (LYCÉE DES MÉTIERS DES ÉNERGIES ET DES SERVICES AUX ENTREPRISES)……………… 53LYCEE DHUODA …………………………………… 54LYCEE FRANCOIS BAZIN …………………………… 55WINDLAB ………………………………………… 56

WIND FARM DEVELOPERS

AILENERGIE CHAMPAGNE ARDENNE ……………… 76BAYWA R.E. FRANCE SAS ………………………… 77BOREAS ………………………………………… 79COMPAGNIE NATIONALE DU RHÔNE (CNR) ……… 80DONG ENERGY …………………………………… 82ECO DELTA ……………………………………… 84ECOTERA DEVELOPPEMENT SAS ………………… 85EDF ENERGIES NOUVELLES ……………………… 86ELECTRAWINDS …………………………………… 87ENEL GREEN POWER FRANCE …………………… 88ENERTRAG ……………………………………… 89ENERYO ………………………………………… 90EOLE AVENIR DEVELOPPEMENT …………………… 91EOLFI …………………………………………… 92EPURON SAS ……………………………………… 93EUROCAPE NEW ENERGY FRANCE ………………… 94FALCK ENERGIES RENOUVELABLES ……………… 95GAMESA EOLICA ………………………………… 67GDF SUEZ ………………………………………… 96GEG ENERGIES NOUVELLES ET RENOUVELABLES … 99GEOLIS ………………………………………… 100GLOBAL WIND POWER FRANCE ………………… 101HYSEO ………………………………………… 102IDEX SAS ……………………………………… 103INITIATIVES & ENERGIES LOCALES ……………… 104JMA ENERGIES ………………………………… 105JP ENERGIE ENVIRONNEMENT ………………… 106LA COMPAGNIE DU VENT ……………………… 107MAÏA EOLIS …………………………………… 108NASS&WIND SAS ……………………………… 109NEOEN ………………………………………… 110NORDEX FRANCE ………………………………… 69NOUVERGIES ………………………………… 111OSTWIND INTERNATIONAL ……………………… 112QUADRAN (JMB ÉNERGIE + AÉROWATT) ……… 113

INDEX


SAINT-LAURENT ÉNERGIE ……………………… 114SAMEOLE ……………………………………… 115SERGIES ……………………………………… 116SOFIVA ENERGIE ……………………………… 118STATKRAFT FRANCE SAS ………………………… 117THEOLIA FRANCE ……………………………… 119UNITE ………………………………………… 120VELOCITA ENERGIES …………………………… 121VENDÉE ENERGIE ……………………………… 122VENTS D’OC ENERGIES RENOUVELABLES ……… 124VOLTALIA ……………………………………… 126VOL-V SAS ……………………………………… 125WINDVISION …………………………………… 127WPD OFFSHORE FRANCE ……………………… 128

WIND FARM OPERATORS

AILENERGIE CHAMPAGNE ARDENNE ……………… 76BAYWA R.E. FRANCE SAS ………………………… 77BOREAS ………………………………………… 79COMPAGNIE NATIONALE DU RHÔNE (CNR) ……… 80DONG ENERGY …………………………………… 82ECOTERA DEVELOPPEMENT SAS ………………… 85EDF ENERGIES NOUVELLES ……………………… 86ELECTRAWINDS …………………………………… 87ENEL GREEN POWER FRANCE …………………… 88ENERTRAG ……………………………………… 89ENERYO ………………………………………… 90EOLE AVENIR DEVELOPPEMENT …………………… 91EOLFI …………………………………………… 92E.ON ……………………………………………… 83EPURON SAS ……………………………………… 93EUROCAPE NEW ENERGY FRANCE ………………… 94FALCK ENERGIES RENOUVELABLES ……………… 95GDF SUEZ ………………………………………… 96GEG ENERGIES NOUVELLES ET RENOUVELABLES … 99GLOBAL WIND POWER FRANCE ………………… 101INITIATIVES & ENERGIES LOCALES ……………… 104JMA ENERGIES ………………………………… 105JP ENERGIE ENVIRONNEMENT ………………… 106LA COMPAGNIE DU VENT ……………………… 107MAÏA EOLIS …………………………………… 108NASS&WIND SAS ……………………………… 109

NEOEN ………………………………………… 110NORDEX FRANCE ………………………………… 69NOUVERGIES ………………………………… 111OSTWIND INTERNATIONAL ……………………… 112QUADRAN (JMB ÉNERGIE + AÉROWATT) ……… 113SAINT-LAURENT ÉNERGIE ……………………… 114SAMEOLE ……………………………………… 115SERGIES ……………………………………… 116SOFIVA ENERGIE ……………………………… 118STATKRAFT FRANCE SAS ………………………… 117THEOLIA FRANCE ……………………………… 119UNITE ………………………………………… 120VELOCITA ENERGIES …………………………… 121VENDÉE ENERGIE ……………………………… 122VENT D’EST SAS ……………………………… 123VOLTALIA ……………………………………… 126VOL-V SAS ……………………………………… 125WINDVISION …………………………………… 127WPD OFFSHORE FRANCE ……………………… 128

WIND MEASUREMENTS

ACROPHOTO …………………………………… 135AUTAN ENVIRONNEMENT ……………………… 155DEWI FRANCE ………………………………… 203ENCIS WIND …………………………………… 218EOLTECH ……………………………………… 222METEODYN …………………………………… 295STE GLOBAL …………………………………… 366

WIND TURBINE MANUFACTURERS

ALIZEO …………………………………………… 59ALSTOM ………………………………………… 60AREVA - BU OFFSHORE WIND ……………………… 62DDIS ……………………………………………… 65ENERCON GMBH ………………………………… 66GAMESA EOLICA ………………………………… 67GE WIND ENERGY ………………………………… 68NORDEX FRANCE ………………………………… 69SENVION FRANCE SAS …………………………… 70SIEMENS WIND POWER …………………………… 71VERGNET ………………………………………… 73VESTAS FRANCE ………………………………… 72


INDEX BY REGIONAlsace


ARCADIS ……………………………………… 150



BURKERT CONTROMATIC FRANCE ……………… 172



GEOTECH INDUSTRIES ………………………… 245

GINGER CEBTP ………………………………… 246



SCHAEFFLER FRANCE SAS ……………………… 338


Aquitaine




CAP INGELEC ………………………………… 174

EADS ASTRIUM ………………………………… 210



EPSILON COMPOSITE ………………………… 224

FAUCHE AUTOMATION AQUITAINE ……………… 230


GANTOIS SA …………………………………… 242

GINGER CEBTP ………………………………… 246

HYTORC ……………………………………… 258

MENARD ……………………………………… 288

PLASTINOV SNE ………………………………… 323

VALEOL ………………………………………… 374

VALREA ………………………………………… 375

Auvergne

FAVIER TPL……………………………………… 231

Brittany

ACTEMIUM …………………………………… 136

ARCADIS ……………………………………… 150



BATTERIES GLOBAL SERVICES ………………… 158

BEUZIT FRANCOIS SARL ………………………… 162

BLP (BOLLORÉ LOGISTIQUE PORTUAIRE) ………… 163


BRETAGNE DEVELOPPEMENT INNOVATION ………… 21

BRETAGNE POLE NAVAL …………………………… 22

C.E.P.S. (CENTRE D’ETUDE ET DE PRATIQUE DE LA

SURVIE) ………………………………………… 52

CMD GEARS …………………………………… 183

CORDIAL ……………………………………… 192


DINALEC SCOP SA ……………………………… 204


EG SOL ………………………………………… 213

FALCK ENERGIES RENOUVELABLES ……………… 95

FONDERIE HELLIN ……………………………… 236

GANTOIS SA …………………………………… 242



IN VIVO ………………………………………… 263

JADE …………………………………………… 267

JIFMAR OFFSHORE SERVICES SAS ……………… 271

JMA ENERGIES ………………………………… 105

MARC S.A. ……………………………………… 283

NASS&WIND INDUSTRIE ……………………… 300

NASS&WIND SAS ……………………………… 109

NAVTIS ………………………………………… 303

PIRIOU ………………………………………… 322


SDMO ………………………………………… 343

INDEX


SEMA (SOCIÉTÉ D’ENTREPRISE METALLURGIQUE

D’ARMOR) ……………………………………… 347



SOBEC SARL …………………………………… 359


ST INDUSTRIES …………………………………… 47

TE2M …………………………………………… 49

VOL-V SAS ……………………………………… 125

Burgundy


ANVIS INDUSTRY ……………………………… 146

CITA PRODUCTION ……………………………… 181

CLM INDUSTRIE ………………………………… 182

CMD GEARS …………………………………… 183

DEC+ ………………………………………… 198

DELTABOX-SERA………………………………… 201

DM TABLEAUX ………………………………… 205

FRANCEOLE …………………………………… 239

GEOTEC ……………………………………… 244


METAL DEPLOYE RESISTOR ……………………… 294

MSB …………………………………………… 299

NICOLAS ……………………………………… 308

ORMAZABAL - ORMAPOST ……………………… 316

REPACK-S ……………………………………… 327

SIMRIT ………………………………………… 355

SKF IN FRANCE ………………………………… 356

WIND FOR FUTURE ……………………………… 34

Centre

AINELEC ……………………………………… 139


BAUDIN CHATEAUNEUF ………………………… 159

CAP INGELEC ………………………………… 174

DEF …………………………………………… 199



GUERTON ……………………………………… 250




SKF IN FRANCE ………………………………… 356

SOLUTIONS COMPOSITES ………………………… 46

VERGNET ………………………………………… 73

VERLINDE ……………………………………… 376


Champagne-Ardenne

AILENERGIE CHAMPAGNE ARDENNE ……………… 76


CAP INGELEC ………………………………… 174


FONDEOLE …………………………………… 235

LA FONTE ARDENNAISE ………………………… 274

LYCEE FRANCOIS BAZIN …………………………… 55

OBSTA ………………………………………… 313

RÉGION CHAMPAGNE-ARDENNE ………………… 32


VENT D’EST SAS ……………………………… 123

WINDVISION …………………………………… 127

DROM

ALIZEO …………………………………………… 59

ANTEAGROUP ………………………………… 145

SAFOR ………………………………………… 332

Foreign stakeholders active in France

DONG ENERGY …………………………………… 82

WESERWIND …………………………………… 378

Franche-Comté


ALIZEO …………………………………………… 59




GE WIND ENERGY ………………………………… 68

LUFKIN FRANCE ………………………………… 278


Ile-de-France

ABB …………………………………………… 132


ALSTOM ………………………………………… 60


ANTEAGROUP ………………………………… 145

APAVE ………………………………………… 147

ARCADIS ……………………………………… 150



AYALA ………………………………………… 157



BONFIGLIOLI TRANSMISSIONS ………………… 165





BUREAU VERITAS ……………………………… 171

CAP INGELEC ………………………………… 174

CATHIE ASSOCIATES …………………………… 177


CMD GEARS …………………………………… 183

COFELY ENDEL ………………………………… 188

COFELY INEO …………………………………… 189

COLAS ………………………………………… 190


CORDIAL ……………………………………… 192



DCNS ………………………………………… 197

DEF …………………………………………… 199

DEKRA INDUSTRIAL …………………………… 200

DEUBLIN SARL ………………………………… 202

DNV GL (EX GL GARRAD HASSAN FRANCE) …… 206

EDF ENERGIES NOUVELLES ……………………… 86

EG SOL ………………………………………… 213



ENERPAC ……………………………………… 219

ENERTRAG ……………………………………… 89

ENERYO ………………………………………… 90

EOLE AVENIR DEVELOPPEMENT …………………… 91

EOLFI …………………………………………… 92

E.ON ……………………………………………… 83

EPURON SAS ……………………………………… 93

ETHM ………………………………………… 227

FRANCEOLE …………………………………… 239



GANTOIS SA …………………………………… 242

GDF SUEZ ………………………………………… 96


GE WIND ENERGY ………………………………… 68

GINGER CEBTP ………………………………… 246

GLOBAL WIND POWER FRANCE ………………… 101


HAWE-OTELEC SAS …………………………… 252

HUTCHINSON ………………………………… 253

HYDRATIGHT SAS ……………………………… 256

HYDROGEOTECHNIQUE ………………………… 257


IDEX SAS ……………………………………… 103



MADEP ………………………………………… 279


MCCF ………………………………………… 285

MENARD ……………………………………… 288

MERSEN ……………………………………… 292

MOOG ………………………………………… 297

NEOEN ………………………………………… 110

NORDEX FRANCE ………………………………… 69

NOUVERGIES ………………………………… 111

OBSTA ………………………………………… 313

OILGEAR TOWLER ……………………………… 314

PARKER OLAER ………………………………… 321

ROXTEC FRANCE SAS…………………………… 330

INDEX


SAFT …………………………………………… 333

SAIPEM ………………………………………… 334

SCHNEIDER ELECTRIC FRANCE ………………… 340


SGS QUALITEST INDUSTRIE …………………… 351

SGURRENERGY ………………………………… 352

SIKA INDUSTRY ………………………………… 353

SIMRIT ………………………………………… 355

SKF IN FRANCE ………………………………… 356


TECHNIP ……………………………………… 369

UBIFRANCE ……………………………………… 33

VELOCITA ENERGIES …………………………… 121


VOITH TURBO…………………………………… 377

VOLTALIA ……………………………………… 126



Languedoc-Roussillon

8.2 FRANCE …………………………………… 131

ALIZEO …………………………………………… 59

ARCADIS ……………………………………… 150



CAPELLE ……………………………………… 175



EG SOL ………………………………………… 213

ERNEO ………………………………………… 225

ETAIR MEDITERRANEE ………………………… 226

EUROCAPE NEW ENERGY FRANCE ………………… 94

LA COMPAGNIE DU VENT ……………………… 107

QUADRAN (JMB ÉNERGIE + AÉROWATT) ……… 113



STE GLOBAL …………………………………… 366


VALEOL ………………………………………… 374

VENTS D’OC ENERGIES RENOUVELABLES ……… 124


VOL-V SAS ……………………………………… 125

Limousin


ENCIS WIND …………………………………… 218


Lorraine

ALMEA ………………………………………… 142

BERTHOLD……………………………………… 161

BOREAS ………………………………………… 79



CORDM ………………………………………… 193



HYDAC ………………………………………… 254

MAÏA EOLIS …………………………………… 108

MANOIR INDUSTRIES …………………………… 282

MERSEN ……………………………………… 292

SAINT-LAURENT ÉNERGIE ……………………… 114

THEPAULT ……………………………………… 371

VENT D’EST SAS ……………………………… 123


Lower Normandy



BMP …………………………………………… 164

DIALOG …………………………………………… 38


EG SOL ………………………………………… 213


ETHM ………………………………………… 227

ETV …………………………………………… 228





MOTEURS J.M. ………………………………… 298



ONEM (OUEST NORMANDIE ENERGIE MARINE) …… 29

SAMEOLE ……………………………………… 115



Midi-Pyrénées

3E FRANCE …………………………………… 130




AYALA ………………………………………… 157


CAHORS DIVISION MOYENNE TENSION ………… 173

CAP INGELEC ………………………………… 174

CEGELEC RENEWABLE ENERGIES ……………… 178


EOLTECH ……………………………………… 222

GINGER CEBTP ………………………………… 246

HYSEO ………………………………………… 102


INGETEAM SAS ………………………………… 264


MOOG ………………………………………… 297


SERHY ………………………………………… 349


SPIE ENERGIES NOUVELLES …………………… 365

TEXSYS ………………………………………… 370



Nord-Pas de Calais





ARCADIS ……………………………………… 150



BECK CRESPEL ………………………………… 160




CMD GEARS …………………………………… 183

DDIS ……………………………………………… 65

DUFOUR ……………………………………… 209

DUNKERQUE PROMOTION ………………………… 25

ECL …………………………………………… 211

ECOTERA DEVELOPPEMENT SAS ………………… 85


EOLISSIMA ……………………………………… 26




GANTOIS SA …………………………………… 242

GINGER CEBTP ………………………………… 246


JADE …………………………………………… 267



MAÏA EOLIS …………………………………… 108


MENARD ……………………………………… 288

NENUPHAR …………………………………… 304

NIDAPLAST COMPOSITES ……………………… 309


PRONAL SAS ……………………………………… 45

SDI (SOCIÉTÉ DE DRAGAGE INTERNATIONAL) …… 344

SEL ENERBETON ……………………………… 346



SOLIMAN LEVAGE ……………………………… 362

UNIJECT ……………………………………… 373

Pays de la Loire

ALTEAD ………………………………………… 143

ARCADIS ……………………………………… 150


BESNÉ MÉCANIQUE DE PRÉCISION ……………… 37

INDEX



CAP INGELEC ………………………………… 174

EMCC ………………………………………… 216

EOLYS RESSOURCES ET ENERGIES ……………… 223

EUROPE TECHNOLOGIES ……………………… 229

FIXATOR…………………………………………… 40

FMGC …………………………………………… 41

FONDASOL …………………………………… 233



GEOLIS ………………………………………… 100

GINGER CEBTP ………………………………… 246

HYTORC ……………………………………… 258




JEFMAG ……………………………………… 269



KEOPS AUTOMATION …………………………… 272

LE MANS WIND CLUSTER ………………………… 27

LINAK FRANCE ………………………………… 276



MERCERON TP ………………………………… 291

METEODYN …………………………………… 295

NAVALU ………………………………………… 302

NEOPOLIA EMR …………………………………… 28

NET WIND ……………………………………… 305

NEXANS ……………………………………… 306





SOGEBRAS …………………………………… 361

SOURIAU ……………………………………… 363

STX FRANCE ENERGIES MARINES ……………… 368

VENDÉE ENERGIE ……………………………… 122


Picardy




DOUCE-HYDRO SAS …………………………… 207


ENERCON GMBH ………………………………… 66

EOLECLEAN …………………………………… 221

MAÏA EOLIS …………………………………… 108

MERSEN ……………………………………… 292


PICARDY - SOMME WIND POWER NETWORK ……… 30

SCOTT BADER SA ……………………………… 341



STO LOGISTIQUE ………………………………… 48

VALEOL ………………………………………… 374

WINDLAB ………………………………………… 56


Poitou-Charentes



EG SOL ………………………………………… 213


ITRON ………………………………………… 266

LEROY-SOMER ………………………………… 275

LP RAOUL MORTIER (LYCÉE DES MÉTIERS DES ÉNERGIES

ET DES SERVICES AUX ENTREPRISES)……………… 53


NOVEOL ……………………………………… 311


SERGIES ……………………………………… 116

TPL INDUSTRIES ……………………………… 372

Provence-Alpes-Côte dAzur


ARCADIS ……………………………………… 150


ATV …………………………………………… 154




CAP INGELEC ………………………………… 174


CMI TECH 51 PASTOR ………………………… 184

CMR FRANCE (CONTRÔLE MESURE REGULATION) 186


ECO DELTA ……………………………………… 84


EG SOL ………………………………………… 213


EOLE SYSTEM ………………………………… 220

FONDASOL …………………………………… 233

FONDASOLUTIONS …………………………… 234

FOSELEV ……………………………………… 238


GANTOIS SA …………………………………… 242

GINGER CEBTP ………………………………… 246

HYTORC ……………………………………… 258

IDEOL ………………………………………… 260

IN VIVO ………………………………………… 263


LYCEE DHUODA …………………………………… 54

MEDIACO LEVAGE ……………………………… 287

MENARD ……………………………………… 288

NHEOLIS ……………………………………… 307

OSEAN ………………………………………… 317

PÔLE MER MEDITERRANÉE ……………………… 31


REVEL ………………………………………… 328


SEMANTIC TS…………………………………… 348

SERHY ………………………………………… 349

SNEF …………………………………………… 358


VOLTALIA ……………………………………… 126

Rhône-Alpes

ACROPHOTO …………………………………… 135

AGRAFE ENR …………………………………… 138




ARCADIS ……………………………………… 150



AVENISENSE …………………………………… 156


BOT FONDERIE ………………………………… 167


CAP INGELEC ………………………………… 174


CHOMARAT …………………………………… 180

CMD GEARS …………………………………… 183

COBHAM SLIPRINGS …………………………… 187

COMPAGNIE NATIONALE DU RHÔNE (CNR) ……… 80

CORDIAL ……………………………………… 192

DEWI FRANCE ………………………………… 203

EG SOL ………………………………………… 213

ENEL GREEN POWER FRANCE …………………… 88

FONDASOL …………………………………… 233




GANTOIS SA …………………………………… 242

GEG ENERGIES NOUVELLES ET RENOUVELABLES … 99

GINGER CEBTP ………………………………… 246


HYTORC ……………………………………… 258



JADE …………………………………………… 267

JAMES WALKER ………………………………… 268

KTR FRANCE …………………………………… 273

MAÏA EOLIS …………………………………… 108


MENARD ……………………………………… 288

MERSEN ……………………………………… 292

MICEL ………………………………………… 296

INDEX




OT ENGINEERING ……………………………… 318

PALFINGER FRANCE …………………………… 319

PARKER HANNIFIN FRANCE SAS ………………… 320

PARKER OLAER ………………………………… 321

PROMIC ……………………………………… 325

SBS FORGE …………………………………… 336

SCAIME SAS …………………………………… 337

SERHY ………………………………………… 349



SOFIVA ENERGIE ……………………………… 118


STATKRAFT FRANCE SAS ………………………… 117

UNITE ………………………………………… 120


Upper Normandy

AETE ENERGIE …………………………………… 36






ETHM ………………………………………… 227

FDKOMPOSITES ………………………………… 232

FOURÉ LAGADEC SARL …………………………… 42



GINGER CEBTP ………………………………… 246


G-TEC SA ……………………………………… 241


MANCHE MARINE INDUSTRIE …………………… 280

MANOFFSHORE ………………………………… 281

PAUMELLE ………………………………………… 43






VALEOL ………………………………………… 374

VALREA ………………………………………… 375

VOL-V SAS ……………………………………… 125


INDEX

ADVERTISERSALIOS INGÉNIERIE …………………………………………………………………………………………… 141

ALSTOM …………………………………………………………………………………………………… 61

APPLISURFACES …………………………………………………………………………………………… 149

AREVA ……………………………………………………………………………………………………… 63

ARIA ………………………………………………………………………………………………………… 20

BRETAGNE PÔLE NAVAL ……………………………………………………………………………………… 23

CGR LEGAL ………………………………………………………………………………………………… 74

CMI TECH 5I PASTOR ………………………………………………………………………………………… 185

COMPAGNIE NATIONALE DU RHÔNE ………………………………………………………………………… 81

GDF SUEZ …………………………………………………………………………………………………… 97

GUERTON …………………………………………………………………………………………………… 251

HYDAC ……………………………………………………………………………………………………… 255

INGETEAM …………………………………………………………………………………………………… 265

MENARD …………………………………………………………………………………………………… 289

MERSEN …………………………………………………………………………………………………… 293

MOTEURS JM ………………………………………………………………………………………………… 2

PEFC ………………………………………………………………………………………………………… 58

REGION CHAMPAGNE-ARDENNE ………………………………………………………………… INSIDE COVER.

SCHAEFFLER FRANCE ……………………………………………………………………………………… 339

SDI ………………………………………………………………………………………………………… 345

SKF ………………………………………………………………………………………………………… 357

STE GLOBAL ………………………………………………………………………………………………… 367

WINDLAB …………………………………………………………………………………………………… 50

Directory of the French Wind Power Industry - enr.fr · PDF filethe contractors operating in...

Documents

Transcript of Directory of the French Wind Power Industry - enr.fr · PDF filethe contractors operating in...