Direct Coupled Actuators - XONET

Direct CoupledActuatorsDuraDriveFor the full range of HVAC applications

Make the most of your energy

2

Direct Coupled Actuators

DuraDrive Spring-Return Direct Coupled ActuatorsWe offer a complete line of direct coupled actuators for all your spring return actuator needs.

Direct coupled easy to install, spring return DuraDrive actuators are available with torques that range from 30 to 150 lb-in for two position, floating or proportional control.

Value-Driven General Purpose Applications

Damp and Harsh Environment Applications

High Performance HVAC Applications

30 lb-in Mx4D series

30 lb-in Mx4D series direct coupled for up to ½” shafts, NEMA 2, 10’ plenum rated cable

standard, accepts ½” conduit connector, convenient manual override, two position, floating or

proportional control.

150 lb-in Mx40-71xx series

150 lb-in Mx40-71xx series direct coupled standard mounting to ½” shafts with optional mounting to

1”. A premier oil immersed gear train actuator for long dependable service with a heavy duty NEMA 4

housing, 3’ cable, accepts ½” conduit connector, CW or CCW spring return mounting.

35 lb-in Mx40 series

35 lb-in Mx40-704x series direct coupled standard mounting to ½” shafts with optional mounting to

¾” shafts. NEMA 2, optional built in auxiliary switches, CW or CCW spring return mounting, 3’ cable,

accepts ½” conduit connector, two position, floating or proportional control.

60 lb-in/133 lb-in Mx41-7xxx series

60 lb-in/133 lb-in Mx41-7xxx series direct coupled standard mounting to ¾” shafts with optional

mounting to 1”. NEMA 2, optional built in auxiliary switches, CW or CCW spring return mounting, 3’

cable, accepts ½” conduit connector, convenient manual override, multiple accessories available,

two position, floating or proportional control.


3

Value-Driven General Purpose ApplicationsPart Number Torque

lb-in (NM)

Spring Return

Actuator Inputs Outputs Approximate Timing in seconds @ 70°FControl Voltage VA @

60HzFeedback Auxiliary

SwitchPowered Spring Return

MA4D-7033-100 30 (3.4) CCW 2 Position 24 vac/dc 5.1 — No 56 23

MA4D-7030-000 30 (3.4) CCW 2 Position 120 vac 7.8 — No 56 23

MA4D-7031-000 30 (3.4) CCW 2 Position 230 vac 7.2 — No 56 23

MA4D-8033-100 30 (3.4) CW 2 Position 24 vac/dc 5.1 — No 56 23

MA4D-8030-000 30 (3.4) CW 2 Position 120 vac 7.8 — No 56 23

MA4D-8031-000 30 (3.4) CW 2 Position 230 vac 7.2 — No 56 23

MF4D-7033-100 30 (3.4) CCW Floating 24 vac/dc 6.8 2-10 vdc No 85 21

MF4D-8033-100 30 (3.4) CW Floating 24 vac/dc 6.8 2-10 vdc No 85 21

MS4D-7033-100 30 (3.4) CCW 2-10 vdc 24 vac/dc 6.1 2-10 vdc No 85 21



MS4D-7033-160 30 (3.4) CCW 4-20 ma 24 vac/dc 6.1 2-10 vdc No 85 21

MS4D-8033-100 30 (3.4) CW 2-10 vdc 24 vac/dc 6.1 2-10 vdc No 85 21



MS4D-8033-160 30 (3.4) CW 4-20 ma 24 vac/dc 6.1 2-10 vdc No 85 21

Spring Return Damper Actuators

Mx4D-703x and Mx4D-803x Series 30 lb-in Direct Coupled

Designed for controlling air dampers in building systems that require fail safe return, with two

position, floating or proportional control.

Features • NEMA 2 and Plenum rated

• 10’ plenum cable (24V Models), 3’ appliance wires for 120/230 vac models

• ½” conduit connection or seal tight

• Overload protected throughout stroke

• 93° nominal rotation

• Automatically adjust input span to match damper travel

• Manual override

• UL-873, cUL C22-2, CE, C-Tick

• Operating Temperature –22 to 140°F (–30 to 60°C)

• Humidity 15 to 95% non-condensing

4


High Performance HVAC ApplicationsPart Number Torque

lb-in (NM)

Spring Return




MA40-7040 35 (4) CW/CCW 2 Position 120 vac 4.3 — — <50 <28

MA40-7040-501 35 (4) CW/CCW 2 Position 120 vac 4.3 — 1-SPDT <50 <28



MA40-7043 35 (4) CW/CCW 2 Position 24 vac/dc 4.4 — — <50 <28

MA40-7043-501 35 (4) CW/CCW 2 Position 24 vac/dc 4.4 — 1-SPDT <50 <28

MF40-7043 35 (4) CW/CCW Floating 24 vac/dc 5.9 — — <130 <25

MF40-7043-501 35 (4) CW/CCW Floating 24 vac/dc 5.9 — 1-SPDT <130 <25

MS40-7043 35 (4) CW/CCW 2-10 vdc 24 vac/dc 5.9 2-10 vdc — <130 <25

MS40-7043-501 35 (4) CW/CCW 2-10 vdc 24 vac/dc 5.9 2-10 vdc 1-SPDT <130 <25


Mx40-704x Series 35 lb-in Direct Coupled





• 3’ plenum cable (24V models), 3’ appliance wires for 120/230 vac models








5


lb-in (NM)

Spring Return




















MS41-7073 60 (7) CW/CCW 2-10vdc 24 vac/dc 5.8 2-10 vdc — <195 <30

MS41-7073-502 60 (7) CW/CCW 2-10vdc 24 vac/dc 5.8 2-10 vdc 2-SPDT <195 <30

MS41-7153 133 (15) CW/CCW 2-10vdc 24 vac/dc 9.7 2-10 vdc <190 <30

MS41-7153-502 133 (15) CW/CCW 2-10vdc 24 vac/dc 9.7 2-10 vdc <190 <30


Mx41-7xxx Series 60 lb-in and 133 lb-in Direct Coupled



Features • NEMA 1 and 2 rated models






• Tandem mounting

• Manual override

• Reverse action switch (MS41 models)




6


Damp & Harsh Environment ApplicationsPart Number Torque

lb-in (NM)

Spring Return




MA40-7170 150 (17) 120 vac 8.4 —

MA40-7171 150 (17) CW/CCW 2 Position 240 vac 9.8 — No 162 82

MA40-7173 150 (17) 24 vac/dc 7.4 —

MF40-7173 150 (17) CW/CCW Floating 24 vac/dc 8.1 — No 162 82

MS40-7170 150 (17) CW/CCW 2-10 vdc 240 vac 8.5 2-10 vdc No 147 65

MS40-7171 150 (17) CW/CCW 2-10 vdc 240 vac 10.8 2-10 vdc No 147 65

MS40-7173 150 (17) CW/CCW 2-10 vdc 24 vac/dc 7.8 2-10 vdc No 147 65



Designed for controlling air dampers in building systems that require fail safe position. With two


Features • Premier oil immersed gear train construction

• NEMA 4 capable

• ½” conduit connections


• Tandem mounting




• Operating Temperature –25 to 140°F ( –32 to 60°C)



7

DuraDrive Non Spring Return Direct Coupled ActuatorsWe offer a complete line of direct coupled actuators for all your non spring return actuator needs.

Direct coupled easy to install, non spring return DuraDrive actuators are available with torque ranges from 35 to 300 lb-in for floating or proportional control.

Economical Floating Applications

Value-Driven General Purpose Applications

Damp and Harsh Environment Applications

High Performance HVAC Applications

35 lb-in or 70 lb-in MF4E series

35 lb-in or 70 lb-in MF4E series direct coupled to ½” shafts, NEMA 1, floating control, 10’ plenum

cable standard, manual override.

35 lb-in or 70 lb-in Mx4D-60xx series

35 lb-in or 70 lb-in Mx4D-60xx series direct coupled up to ½” shafts, NEMA 2, 10’ plenum rated cable,

accepts ½” conduit connector, convenient manual override, two position, floating or proportional

control models.


300 lb-in Mx41-63xx series direct couple standard mounting to ½” shafts with optional mounting

to 1”, manual override, premier oil immersed gear train actuator for long dependable service with

a heavy duty NEMA 4 housing, 3’ cable, accepts ½” conduit connector, two position, floating or

proportional control.

35 lb-in or 70 lb-in Mx41-60xx series

35 lb-in or 70 lb-in Mx41-60xx series direct coupled standard mounting to 5/8” shafts, NEMA 2,

manual override, 3’ plemun rated cable, optional ½” conduit connection, optional built in auxiliary

switches, two position, floating or proportional control.


133 lb-in Mx41-61xx series direct coupled up to ¾” shafts, NEMA 1, manual override, 3’ cable,

accepts ½” conduit connector, optional auxiliary switch, two position, floating or proportional control.

8


Economical Floating ApplicationsPart Number Torque

lb-in (NM)Actuator Inputs Outputs Approximate Timing in sec. @ 70°FControl Voltage VA @ 60Hz Feedback Auxiliary Switch Spring Return

MF4E-60430-100 35 (4) Floating 24 vac 2 No 90

MF4E-60830-100 70 (8) Floating 24 vac 2 No 90

Non Spring Return Damper Actuators

Mx4E-60x30 Series 35 lb-in and 70 lb-in Direct Coupled

Designed for controlling air dampers in building systems with floating control.

Features • Adjustable stroke limits

• NEMA 1 and Plenum rated

• 10’ plenum cable with strain relief



• Manual override





9

Value-Driven General Purpose ApplicationsPart Number Torque


MF4D-6043-100 35 (4) Floating 24 vac/dc 4.4 2-10 vdc No 85

MF4D-6083-100 70 (8) Floating 24 vac/dc 5.9 2-10 vdc No 85

MS4D-6043-100 35 (4) 2-10 vdc 24 vac/dc 4.2 2-10 vdc No 85



MS4D-6043-160 35 (4) 4-20 ma 24 vac/dc 4.2 2-10 vdc No 85




MS4D-6083-160 70 (8) 4-20 ma 24 vac/dc 5.2 2-10 vdc No 85


Mx4D-60x3 Series 35 lb-in and 70 lb-in Direct Coupled

Designed for controlling air dampers in building systems with floating or proportional control.


• 10’ plenum cable





• Manual override




10




MF41-6043 35 (4) Floating 24 vac 2.3 — — 90

MF41-6043-510 35 (4) Floating 24 vac 2.3 1000 ohm — 90

MF41-6043-502 35 (4) Floating 24 vac 2.3 — 2-SPDT 90

MF41-6083 70 (8) Floating 24 vac 2.3 — — 125

MF41-6083-510 70 (8) Floating 24 vac 2.3 1000 ohm — 125

MF41-6083-502 70 (8) Floating 24 vac 2.3 — 2-SPDT 125

MS41-6043 35 (4) 0-10 vdc 24 vac 3.3 0-10 vdc — 90

MS41-6043-520 70 (8) 0-10 vdc* 24 vac 3.3 0-10 vdc — 90

MS41-6043-502 70 (8) 0-10 vdc 24 vac 3.3 0-10 vdc 2-SPDT 90

MS41-6083 70 (8) 0-10 vdc 24 vac 3.3 0-10 vdc — 125

MS41-6083-520 70 (8) 0-10 vdc* 24 vac 3.3 0-10 vdc — 125

MS41-6083-502 70 (8) 0-10 vdc 24 vac 3.3 0-10 vdc 2-SPDT 125

* Adjustable


Mx41-60x3 Series 35 lb-in and 70 lb-in Direct Coupled


Features • Compact Design

• NEMA 2 and Plenum rated





• Manual override

• Auxiliary Switches Optional

• Adjustable zero and span model available

• UL-873, cUL C22-2, CE




11



MF41-6153 133 (15) Floating 24 vac 3 — — 125

MS41-6153 133 (15) 0-10 vdc 24 vac 5 0-10 vdc — 125

MS41-6153-502 133 (15) 0-10 vdc 24 vac 5 0-10 vdc 2-SPDT 125


Mx41-6153 Series 133 lb-in Direct Coupled


Features • NEMA 1

• Span adjust Function Switch

• 0-10 vdc (factory set), 2-10 input switch or floating control



• Tandem mounting


• Manual override

• ½” conduit connection

• Auxiliary Switches Optional

• UL-873, cUL C22-2, CE



12


Damp & Harsh Environment ApplicationsPart Number Torque


MF41-6343 300 (34) Floating 24 vac/dc 5.7 — No 162

MS41-6343 300 (34) 2-10 vdc 24 vac/dc 5.6 2-10 vdc No 148

MS41-6340 300 (34) 2-10 vdc 120 vac 7.5 2-10 vdc No 148

MS41-6341 300 (34) 2-10 vdc 240 vac 9.0 2-10 vdc No 148




Features • Premier oil immersed gear train construction

• NEMA 4 capable

• ½” conduit connections




• Manual override

• Tandem Mounting





13

Accessories Chart

Part Number

Description

Spring Return Actuators Non Spring Return Actuators

General Instructions Document

MA

40-7

043

MF4

0-70

43

MS

40-7

043

MA

41-7

073

MF4

1-70

73

MS

41-7

073

MA

41-7

153

MF4

1-71

53

MS

41-7

153

MA

40-7

17x

MF4

0-71

73

MS

40-7

173

MS

4D-x

033

MF4

1-60

43

MS

41-6

043

MF4

1-60

83

MS

41-6

083

MF4

1-61

53

MS

41-6

153

MF4

1-63

43

MS

41-6

343

MS

4D-6

0x3-

1xx

AM-620 Actuator Remote Mount

X X X X X X F-27484

AM-621 Round Shaft Extension

X X X X X X F-27481

AM-671abc

Mounting Bracket

X X X X X XF-25096AM-672abc X X X X X X

AM-673b X X X X X XAM-674 Weather

Shield & BaseX X X X X X X X X X

F-25097AM-675 X X X X X XAM-676 Shaft Extension X X X X X X X X X X

F-25098

AM-686 Position Indicator

X X X X

AM-687d V-clamp X X X XAM-688 Relacement

Universal ClampX X X X

AM-689 Rotation Limiter X X X XAM-690

Crank ArmX X X X

AM-691 X X X XAM-692e V-bolt X X X XAM-693fg Crank Arm Kit X X X X

Damper Actuators

a AM-693 crank arm kit required.b Drill appropriate mounting holes where needed.c The large “C”-shaped clamps included in AM-693 crank arm kit are required

for mounting the actuator. Drill appropriate mounting holes where needed.d For shafts to 1.05” (26.7 mm) diameter or ⁵⁄⁵” (15.9 mm) square.

e For shafts to ¾” and 1.05” (19 to 26.7 mm) diameter (with AM-690 and AM-691, respectively).

f Use the self-tapping screws and flat washers provided in kit to mount actuator.

g AM-692 V-bolt kit required.

14


a For shafts up to ¾” (19 mm) diameter round up to ½” (13 mm) square.b Cannot be used when creating a linked valve/actuator assembly.

Accessories Chart

Part Number

Description



MA

40-7

043

MF4

0-70

43

MS

40-7

043

MA

41-7

073

MF4

1-70

73

MS

41-7

073

MA

41-7

153

MF4

1-71

53

MS

41-7

153

MA

40-7

17x

MF4

0-71

73

MS

40-7

173

MS

4D-x

033

MF4

1-60

43

MS

41-6

043

MF4

1-60

83

MS

41-6

083

MF4

1-61

53

MS

41-6

153

MF4

1-63

43

MS

41-6

343

MS

4D-6

0x3-

1xx

AM-703 Span Adjustment

X X X X X X X XF-26895

AM-704 Modulation Interface

X X X X X X X X

AM-705Positioner

X X X X X X X X XF-26895AM-706 X X X X X X X X X

AM-708 500 Ω Resistor X X X X X X XAM-709 Position Indicator

& Stroke LimiterX X

F-26896AM-710a V-clamp X XAM-711 Crank Arm

Adaptor KitX X

AM-712 X XAM-713 Bracket X X XAM-714 Weather Shield X X X X X X X F-25097AM-715 Crank Arm

Adaptor KitX X F-26896

AM-717 Replacement Universal Clamp

X X F-26896

AM-726 Crank Arm Adaptor

X X X XF-26802AM-727 X X X X

AM-728b Conduit Adaptor X X X XAM-751 Anti-rotation

BracketX X X X

F-26898AM-752 X X X X

Damper Actuators


15

Accessories Chart

Part Number

Description



MA

40-7

043

MF4

0-70

43

MS

40-7

043

MA

41-7

073

MF4

1-70

73

MS

41-7

073

MA

41-7

153

MF4

1-71

53

MS

41-7

153

MA

40-7

17x

MF4

0-71

73

MS

40-7

173

MS

4D-x

033

MF4

1-60

43

MS

41-6

043

MF4

1-60

83

MS

41-6

083

MF4

1-61

53

MS

41-6

153

MF4

1-63

43

MS

41-6

343

MS

4D-6

0x3-

1xx

AM-735 Crank Arm Kit X X F-27246AM-736 Crank Arm Kit

with BracketX X F-27247

AM-737 Universal Crank Arma X X F-27248

AM-470 Replacement Kit X X F-27249AM-741 Weather Shield X X X X X F-27250AM-753b

Mounting ClampX X X X

F-26898AM-754c X X X XAM-755 Manual Override

CrankX X

AM-756 Metric Conduit Adaptor

X X X X X X X X X X X X F-26899

AM-758 Short “U” Mounting Bracket

X X X X

F-25096AM-759 Tall “U” Mounting

BracketX X X X

AM-760 Slotted “L” Mounting Bracket

X X X X

AM-761 7-inch Anti-rotation Bracket

X X F-26986

AM-762 9-inch Anti-rotation Bracket

X X X X X X X X X X F-25098

AM-763 Manual Override Crank

Xd Xd Xd Xd X F-25098

TF-711-02 Seallight Conduit Connector

X X X XTF-713-02 X X X XTF-5521 Pipe Plug X X X X

Damper Actuators

a For Honeywell Floor Mount Mod. Motor.b For shafts ¾” (19 mm) round and ⁵⁄⁵” (15.9 mm) square.

c For shafts ³⁄⁵” to ½” (10 to 13 mm) round and square.d Only used on Mx41-707x-xxx, Mx41-715x-xxx.

Schneider Electric

1354 Clifford AvenueLoves Park, IL 61111Phone: + 1 888 444 1311 www.schneider-electric.com/buildings

On October 1st, 2009, TAC became the Buildings Business of its parent company Schneider Electric. This document reflects the visual identity of Schneider Electric, however there remains references to TAC as a corporate brand in the body copy. As each document is updated, the body copy will be changed to reflect appropriate corporate brand changes. All brand names, trademarks and registered trademarks are the property of their respective owners.

F-27272-3

© 2

006-

2009

Sch

neid

er E

lect

ric. A

ll rig

hts

rese

rved

.

September 2009 mh

Direct Coupled Actuators - XONET

Documents

Transcript of Direct Coupled Actuators - XONET